endif
# Force gcc to behave correct even for buggy distributions
-# Arch Makefiles may override this setting
+ifndef CONFIG_CC_STACKPROTECTOR
KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+endif
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
#ifndef _ALPHA_STATFS_H
#define _ALPHA_STATFS_H
+#include <linux/types.h>
+
/* Alpha is the only 64-bit platform with 32-bit statfs. And doesn't
even seem to implement statfs64 */
#define __statfs_word __u32
#ifndef _ALPHA_SWAB_H
#define _ALPHA_SWAB_H
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/compiler.h>
#include <asm/compiler.h>
#define __ARM_A_OUT_H__
#include <linux/personality.h>
-#include <asm/types.h>
+#include <linux/types.h>
struct exec
{
#ifndef __ASMARM_SETUP_H
#define __ASMARM_SETUP_H
-#include <asm/types.h>
+#include <linux/types.h>
#define COMMAND_LINE_SIZE 1024
#define __ASM_ARM_SWAB_H
#include <linux/compiler.h>
-#include <asm/types.h>
+#include <linux/types.h>
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __SWAB_64_THRU_32__
#ifndef __ASM_AVR32_SWAB_H
#define __ASM_AVR32_SWAB_H
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/compiler.h>
#define __SWAB_64_THRU_32__
#ifndef _BLACKFIN_SWAB_H
#define _BLACKFIN_SWAB_H
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/compiler.h>
#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
#ifndef _H8300_SWAB_H
#define _H8300_SWAB_H
-#include <asm/types.h>
+#include <linux/types.h>
#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __SWAB_64_THRU_32__
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
-#include <asm/types.h>
-
/* floating point status register: */
#define FPSR_TRAP_VD (1 << 0) /* invalid op trap disabled */
#define FPSR_TRAP_DD (1 << 1) /* denormal trap disabled */
* Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
*/
+#include <linux/types.h>
#include <linux/compiler.h>
/* define this macro to get some asm stmts included in 'c' files */
#ifndef __ASSEMBLY__
+#include <linux/types.h>
/* include compiler specific intrinsics */
#include <asm/ia64regs.h>
#ifdef __INTEL_COMPILER
*
*/
-#include <asm/types.h>
-
+#include <linux/types.h>
#include <linux/ioctl.h>
/* Architectural interrupt line count. */
#else /* ! SMP */
-#define PER_CPU_ATTRIBUTES __attribute__((__section__(".data.percpu")))
-
#define per_cpu_init() (__phys_per_cpu_start)
#endif /* SMP */
+#define PER_CPU_BASE_SECTION ".data.percpu"
+
/*
* Be extremely careful when taking the address of this variable! Due to virtual
* remapping, it is different from the canonical address returned by __get_cpu_var(var)!
* David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
*/
-#include <asm/types.h>
+#include <linux/types.h>
#include <asm/intrinsics.h>
#include <linux/compiler.h>
--- /dev/null
+#ifndef _ASM_IA64_UV_UV_H
+#define _ASM_IA64_UV_UV_H
+
+#include <asm/system.h>
+#include <asm/sn/simulator.h>
+
+static inline int is_uv_system(void)
+{
+ /* temporary support for running on hardware simulator */
+ return IS_MEDUSA() || ia64_platform_is("uv");
+}
+
+#endif /* _ASM_IA64_UV_UV_H */
return __va(phys_addr);
}
+void __init __acpi_unmap_table(char *map, unsigned long size)
+{
+}
+
/* --------------------------------------------------------------------------
Boot-time Table Parsing
-------------------------------------------------------------------------- */
#ifndef _ASM_SIGCONTEXT_H
#define _ASM_SIGCONTEXT_H
+#include <linux/types.h>
#include <asm/sgidefs.h>
#if _MIPS_SIM == _MIPS_SIM_ABI32
#define _ASM_SWAB_H
#include <linux/compiler.h>
-#include <asm/types.h>
+#include <linux/types.h>
#define __SWAB_64_THRU_32__
#define NUM_PDC_RESULT 32
#if !defined(__ASSEMBLY__)
-#ifdef __KERNEL__
#include <linux/types.h>
+#ifdef __KERNEL__
+
extern int pdc_type;
/* Values for pdc_type */
#ifndef _PARISC_SWAB_H
#define _PARISC_SWAB_H
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/compiler.h>
#define __SWAB_64_THRU_32__
#ifndef __ASM_BOOTX_H__
#define __ASM_BOOTX_H__
-#include <asm/types.h>
+#include <linux/types.h>
#ifdef macintosh
#include <Types.h>
#include <asm/string.h>
#endif
-#include <asm/types.h>
+#include <linux/types.h>
#include <asm/ptrace.h>
#include <asm/cputable.h>
#include <asm/auxvec.h>
#ifndef __LINUX_KVM_POWERPC_H
#define __LINUX_KVM_POWERPC_H
-#include <asm/types.h>
+#include <linux/types.h>
struct kvm_regs {
__u64 pc;
#ifndef _ASM_POWERPC_PS3FB_H_
#define _ASM_POWERPC_PS3FB_H_
+#include <linux/types.h>
#include <linux/ioctl.h>
/* ioctl */
#ifndef _SPU_INFO_H
#define _SPU_INFO_H
+#include <linux/types.h>
+
#ifdef __KERNEL__
#include <asm/spu.h>
-#include <linux/types.h>
#else
struct mfc_cq_sr {
__u64 mfc_cq_data0_RW;
* 2 of the License, or (at your option) any later version.
*/
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/compiler.h>
#ifdef __GNUC__
depends on SMP || (64BIT && ACPI_SLEEP)
default y
+config X86_32_LAZY_GS
+ def_bool y
+ depends on X86_32 && !CC_STACKPROTECTOR
+
config KTIME_SCALAR
def_bool X86_32
source "init/Kconfig"
config CC_STACKPROTECTOR
bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
- depends on X86_64
select CC_STACKPROTECTOR_ALL
---help---
This option turns on the -fstack-protector GCC feature. This
# this works around some issues with generating unwind tables in older gccs
# newer gccs do it by default
KBUILD_CFLAGS += -maccumulate-outgoing-args
+endif
- stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh
- stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \
- "$(CC)" "-fstack-protector -DGCC_HAS_SP" )
- stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \
- "$(CC)" -fstack-protector-all )
-
- KBUILD_CFLAGS += $(stackp-y)
+ifdef CONFIG_CC_STACKPROTECTOR
+ cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
+ ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC)),y)
+ stackp-y := -fstack-protector
+ stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all
+ KBUILD_CFLAGS += $(stackp-y)
+ else
+ $(warning stack protector enabled but no compiler support)
+ endif
endif
# Stackpointer is addressed different for 32 bit and 64 bit x86
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007-2008 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
#include "boot.h"
#define MAX_8042_LOOPS 100000
+#define MAX_8042_FF 32
static int empty_8042(void)
{
u8 status;
int loops = MAX_8042_LOOPS;
+ int ffs = MAX_8042_FF;
while (loops--) {
io_delay();
status = inb(0x64);
+ if (status == 0xff) {
+ /* FF is a plausible, but very unlikely status */
+ if (!--ffs)
+ return -1; /* Assume no KBC present */
+ }
if (status & 1) {
/* Read and discard input data */
io_delay();
int enable_a20(void)
{
-#if defined(CONFIG_X86_ELAN)
- /* Elan croaks if we try to touch the KBC */
- enable_a20_fast();
- while (!a20_test_long())
- ;
- return 0;
-#elif defined(CONFIG_X86_VOYAGER)
+#ifdef CONFIG_X86_VOYAGER
/* On Voyager, a20_test() is unsafe? */
enable_a20_kbc();
return 0;
#else
int loops = A20_ENABLE_LOOPS;
- while (loops--) {
- /* First, check to see if A20 is already enabled
- (legacy free, etc.) */
- if (a20_test_short())
- return 0;
-
- /* Next, try the BIOS (INT 0x15, AX=0x2401) */
- enable_a20_bios();
- if (a20_test_short())
- return 0;
-
- /* Try enabling A20 through the keyboard controller */
- empty_8042();
- if (a20_test_short())
- return 0; /* BIOS worked, but with delayed reaction */
-
- enable_a20_kbc();
- if (a20_test_long())
- return 0;
-
- /* Finally, try enabling the "fast A20 gate" */
- enable_a20_fast();
- if (a20_test_long())
- return 0;
- }
-
- return -1;
+ int kbc_err;
+
+ while (loops--) {
+ /* First, check to see if A20 is already enabled
+ (legacy free, etc.) */
+ if (a20_test_short())
+ return 0;
+
+ /* Next, try the BIOS (INT 0x15, AX=0x2401) */
+ enable_a20_bios();
+ if (a20_test_short())
+ return 0;
+
+ /* Try enabling A20 through the keyboard controller */
+ kbc_err = empty_8042();
+
+ if (a20_test_short())
+ return 0; /* BIOS worked, but with delayed reaction */
+
+ if (!kbc_err) {
+ enable_a20_kbc();
+ if (a20_test_long())
+ return 0;
+ }
+
+ /* Finally, try enabling the "fast A20 gate" */
+ enable_a20_fast();
+ if (a20_test_long())
+ return 0;
+ }
+
+ return -1;
#endif
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Wed Sep 3 17:23:09 2008
+# Linux kernel version: 2.6.29-rc4
+# Thu Feb 12 12:57:57 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
+CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Processor type and features
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
+CONFIG_SPARSE_IRQ=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_CYRIX_32=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR_32=y
+CONFIG_CPU_SUP_TRANSMETA_32=y
+CONFIG_CPU_SUP_UMC_32=y
+CONFIG_X86_DS=y
+CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_HIGHPTE=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
+# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
-# Power management options
+# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
#
# shared options
#
-# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
+CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
-CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+# CONFIG_RFKILL_INPUT is not set
+CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-# CONFIG_ACER_WMI is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_TC1100_WMI is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_RT2X00 is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_HWMON is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
+# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
+# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
-# CONFIG_FB_IMAC is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
+# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
+CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
+# CONFIG_SND_HDA_RECONFIG is not set
+# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT_POWERBOOK=y
-CONFIG_HID_FF=y
CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
#
# LED drivers
#
+# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+# CONFIG_ACER_WMI is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_TC1100_WMI is not set
+# CONFIG_MSI_LAPTOP is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_THINKPAD_ACPI is not set
+# CONFIG_INTEL_MENLOW is not set
+CONFIG_EEEPC_LAPTOP=y
+# CONFIG_ACPI_WMI is not set
+# CONFIG_ACPI_ASUS is not set
+# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=y
+# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_HW_BRANCH_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_POWER_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_HW_BRANCH_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Wed Sep 3 17:13:39 2008
+# Linux kernel version: 2.6.29-rc4
+# Thu Feb 12 12:57:29 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-CONFIG_CGROUP_NS=y
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
+CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Processor type and features
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
+CONFIG_SPARSE_IRQ=y
+# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
+CONFIG_CPU_SUP_INTEL=y
+CONFIG_CPU_SUP_AMD=y
+CONFIG_CPU_SUP_CENTAUR_64=y
+CONFIG_X86_DS=y
+CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
+CONFIG_AMD_IOMMU_STATS=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
+CONFIG_IOMMU_API=y
+# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
+CONFIG_MICROCODE_INTEL=y
+CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
+CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
+# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
-# Power management options
+# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
-# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
-# CONFIG_ACPI_WMI is not set
-# CONFIG_ACPI_ASUS is not set
-# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
#
# shared options
#
-# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
+# Memory power savings
+#
+# CONFIG_I7300_IDLE is not set
+
+#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
+# CONFIG_DMAR_DEFAULT_ON is not set
CONFIG_DMAR_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
+# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_NF_CONNTRACK_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
-CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_INGRESS is not set
#
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+# CONFIG_RFKILL_INPUT is not set
+CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-# CONFIG_ACER_WMI is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_MSI_LAPTOP is not set
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_THINKPAD_ACPI is not set
-# CONFIG_INTEL_MENLOW is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
# CONFIG_SGI_GRU is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=y
+# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_RT2X00 is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_HWMON is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
+# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
+# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
+CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
-# CONFIG_FB_IMAC is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
+# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
+CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
+# CONFIG_SND_HDA_RECONFIG is not set
+# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# USB Input Devices
#
CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT_POWERBOOK=y
-CONFIG_HID_FF=y
CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
#
# LED drivers
#
+# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_X86_PLATFORM_DEVICES=y
+# CONFIG_ACER_WMI is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_MSI_LAPTOP is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_THINKPAD_ACPI is not set
+# CONFIG_INTEL_MENLOW is not set
+CONFIG_EEEPC_LAPTOP=y
+# CONFIG_ACPI_WMI is not set
+# CONFIG_ACPI_ASUS is not set
+# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
-CONFIG_ISCSI_IBFT_FIND=y
-CONFIG_ISCSI_IBFT=y
+# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_HW_BRANCH_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_POWER_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_HW_BRANCH_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
+CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
-# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
dump->regs.ds = (u16)regs->ds;
dump->regs.es = (u16)regs->es;
dump->regs.fs = (u16)regs->fs;
- savesegment(gs, dump->regs.gs);
+ dump->regs.gs = get_user_gs(regs);
dump->regs.orig_ax = regs->orig_ax;
dump->regs.ip = regs->ip;
dump->regs.cs = (u16)regs->cs;
acpi_noirq = 1;
}
-/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */
-#define FIX_ACPI_PAGES 4
-
extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
/*
- * Some macros to handle stack frames in assembly.
+
+ x86 function call convention, 64-bit:
+ -------------------------------------
+ arguments | callee-saved | extra caller-saved | return
+ [callee-clobbered] | | [callee-clobbered] |
+ ---------------------------------------------------------------------------
+ rdi rsi rdx rcx r8-9 | rbx rbp [*] r12-15 | r10-11 | rax, rdx [**]
+
+ ( rsp is obviously invariant across normal function calls. (gcc can 'merge'
+ functions when it sees tail-call optimization possibilities) rflags is
+ clobbered. Leftover arguments are passed over the stack frame.)
+
+ [*] In the frame-pointers case rbp is fixed to the stack frame.
+
+ [**] for struct return values wider than 64 bits the return convention is a
+ bit more complex: up to 128 bits width we return small structures
+ straight in rax, rdx. For structures larger than that (3 words or
+ larger) the caller puts a pointer to an on-stack return struct
+ [allocated in the caller's stack frame] into the first argument - i.e.
+ into rdi. All other arguments shift up by one in this case.
+ Fortunately this case is rare in the kernel.
+
+For 32-bit we have the following conventions - kernel is built with
+-mregparm=3 and -freg-struct-return:
+
+ x86 function calling convention, 32-bit:
+ ----------------------------------------
+ arguments | callee-saved | extra caller-saved | return
+ [callee-clobbered] | | [callee-clobbered] |
+ -------------------------------------------------------------------------
+ eax edx ecx | ebx edi esi ebp [*] | <none> | eax, edx [**]
+
+ ( here too esp is obviously invariant across normal function calls. eflags
+ is clobbered. Leftover arguments are passed over the stack frame. )
+
+ [*] In the frame-pointers case ebp is fixed to the stack frame.
+
+ [**] We build with -freg-struct-return, which on 32-bit means similar
+ semantics as on 64-bit: edx can be used for a second return value
+ (i.e. covering integer and structure sizes up to 64 bits) - after that
+ it gets more complex and more expensive: 3-word or larger struct returns
+ get done in the caller's frame and the pointer to the return struct goes
+ into regparm0, i.e. eax - the other arguments shift up and the
+ function's register parameters degenerate to regparm=2 in essence.
+
+*/
+
+
+/*
+ * 64-bit system call stack frame layout defines and helpers,
+ * for assembly code:
*/
#define R15 0
#define RBP 32
#define RBX 40
-/* arguments: interrupts/non tracing syscalls only save upto here*/
+/* arguments: interrupts/non tracing syscalls only save up to here: */
#define R11 48
#define R10 56
#define R9 64
#define ORIG_RAX 120 /* + error_code */
/* end of arguments */
-/* cpu exception frame or undefined in case of fast syscall. */
+/* cpu exception frame or undefined in case of fast syscall: */
#define RIP 128
#define CS 136
#define EFLAGS 144
* now struct_user_regs, they are different)
*/
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+#define ELF_CORE_COPY_REGS_COMMON(pr_reg, regs) \
do { \
pr_reg[0] = regs->bx; \
pr_reg[1] = regs->cx; \
pr_reg[7] = regs->ds & 0xffff; \
pr_reg[8] = regs->es & 0xffff; \
pr_reg[9] = regs->fs & 0xffff; \
- savesegment(gs, pr_reg[10]); \
pr_reg[11] = regs->orig_ax; \
pr_reg[12] = regs->ip; \
pr_reg[13] = regs->cs & 0xffff; \
pr_reg[16] = regs->ss & 0xffff; \
} while (0);
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+do { \
+ ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
+ pr_reg[10] = get_user_gs(regs); \
+} while (0);
+
+#define ELF_CORE_COPY_KERNEL_REGS(pr_reg, regs) \
+do { \
+ ELF_CORE_COPY_REGS_COMMON(pr_reg, regs);\
+ savesegment(gs, pr_reg[10]); \
+} while (0);
+
#define ELF_PLATFORM (utsname()->machine)
#define set_personality_64bit() do { } while (0)
(__end_of_permanent_fixed_addresses & 255),
FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_SLOTS - 1,
FIX_WP_TEST,
-#ifdef CONFIG_ACPI
- FIX_ACPI_BEGIN,
- FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
FIX_OHCI1394_BASE,
#endif
FIX_PARAVIRT_BOOTMAP,
#endif
__end_of_permanent_fixed_addresses,
-#ifdef CONFIG_ACPI
- FIX_ACPI_BEGIN,
- FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
-#endif
#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
FIX_OHCI1394_BASE,
#endif
#include <linux/compiler.h>
#include <asm-generic/int-ll64.h>
+#include <asm/page.h>
#define build_mmio_read(name, size, type, reg, barrier) \
static inline type name(const volatile void __iomem *addr) \
#define readq readq
#define writeq writeq
+/**
+ * virt_to_phys - map virtual addresses to physical
+ * @address: address to remap
+ *
+ * The returned physical address is the physical (CPU) mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses directly mapped or allocated via kmalloc.
+ *
+ * This function does not give bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+
+static inline phys_addr_t virt_to_phys(volatile void *address)
+{
+ return __pa(address);
+}
+
+/**
+ * phys_to_virt - map physical address to virtual
+ * @address: address to remap
+ *
+ * The returned virtual address is a current CPU mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses that have a kernel mapping
+ *
+ * This function does not handle bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+
+static inline void *phys_to_virt(phys_addr_t address)
+{
+ return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus (unsigned long)virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/**
+ * ioremap - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * If the area you are trying to map is a PCI BAR you should have a
+ * look at pci_iomap().
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+ unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+ return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+
+
#ifdef CONFIG_X86_32
# include "io_32.h"
#else
extern void early_iounmap(void __iomem *addr, unsigned long size);
extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+#define IO_SPACE_LIMIT 0xffff
#endif /* _ASM_X86_IO_H */
* - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*/
-#define IO_SPACE_LIMIT 0xffff
-
#define XQUAD_PORTIO_BASE 0xfe400000
#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
*/
#define xlate_dev_kmem_ptr(p) p
-/**
- * virt_to_phys - map virtual addresses to physical
- * @address: address to remap
- *
- * The returned physical address is the physical (CPU) mapping for
- * the memory address given. It is only valid to use this function on
- * addresses directly mapped or allocated via kmalloc.
- *
- * This function does not give bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-
-static inline unsigned long virt_to_phys(volatile void *address)
-{
- return __pa(address);
-}
-
-/**
- * phys_to_virt - map physical address to virtual
- * @address: address to remap
- *
- * The returned virtual address is a current CPU mapping for
- * the memory address given. It is only valid to use this function on
- * addresses that have a kernel mapping
- *
- * This function does not handle bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-
-static inline void *phys_to_virt(unsigned long address)
-{
- return __va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
-/**
- * ioremap - map bus memory into CPU space
- * @offset: bus address of the memory
- * @size: size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- *
- * If the area you are trying to map is a PCI BAR you should have a
- * look at pci_iomap().
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
- unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
- return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
static inline void
memset_io(volatile void __iomem *addr, unsigned char val, int count)
{
__OUTS(w)
__OUTS(l)
-#define IO_SPACE_LIMIT 0xffff
-
#if defined(__KERNEL__) && defined(__x86_64__)
#include <linux/vmalloc.h>
-#ifndef __i386__
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are pretty trivial
- */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
- return __pa(address);
-}
-
-static inline void *phys_to_virt(unsigned long address)
-{
- return __va(address);
-}
-#endif
-
-/*
- * Change "struct page" to physical address.
- */
-#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-
#include <asm-generic/iomap.h>
-/*
- * This one maps high address device memory and turns off caching for that area.
- * it's useful if some control registers are in such an area and write combining
- * or read caching is not desirable:
- */
-extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
-extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
- unsigned long prot_val);
-
-/*
- * The default ioremap() behavior is non-cached:
- */
-static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
-{
- return ioremap_nocache(offset, size);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-
-extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
-
-/*
- * ISA I/O bus memory addresses are 1:1 with the physical address.
- */
-#define isa_virt_to_bus virt_to_phys
-#define isa_page_to_bus page_to_phys
-#define isa_bus_to_virt phys_to_virt
-
-/*
- * However PCI ones are not necessarily 1:1 and therefore these interfaces
- * are forbidden in portable PCI drivers.
- *
- * Allow them on x86 for legacy drivers, though.
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
void __memcpy_fromio(void *, unsigned long, unsigned);
void __memcpy_toio(unsigned long, const void *, unsigned);
# define PAGES_NR 4
#else
# define PA_CONTROL_PAGE 0
-# define VA_CONTROL_PAGE 1
-# define PA_PGD 2
-# define VA_PGD 3
-# define PA_PUD_0 4
-# define VA_PUD_0 5
-# define PA_PMD_0 6
-# define VA_PMD_0 7
-# define PA_PTE_0 8
-# define VA_PTE_0 9
-# define PA_PUD_1 10
-# define VA_PUD_1 11
-# define PA_PMD_1 12
-# define VA_PMD_1 13
-# define PA_PTE_1 14
-# define VA_PTE_1 15
-# define PA_TABLE_PAGE 16
-# define PAGES_NR 17
+# define PA_TABLE_PAGE 1
+# define PAGES_NR 2
#endif
#ifdef CONFIG_X86_32
unsigned long start_address) ATTRIB_NORET;
#endif
-#ifdef CONFIG_X86_32
#define ARCH_HAS_KIMAGE_ARCH
+#ifdef CONFIG_X86_32
struct kimage_arch {
pgd_t *pgd;
#ifdef CONFIG_X86_PAE
pte_t *pte0;
pte_t *pte1;
};
+#else
+struct kimage_arch {
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+};
#endif
#endif /* __ASSEMBLY__ */
#ifdef CONFIG_X86_32
#define deactivate_mm(tsk, mm) \
do { \
- loadsegment(gs, 0); \
+ lazy_load_gs(0); \
} while (0)
#else
#define deactivate_mm(tsk, mm) \
#ifndef _ASM_X86_PAGE_H
#define _ASM_X86_PAGE_H
-#include <linux/const.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
+#include <linux/types.h>
#ifdef __KERNEL__
-#define __PHYSICAL_MASK ((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
-#define __VIRTUAL_MASK ((1UL << __VIRTUAL_MASK_SHIFT) - 1)
-
-/* Cast PAGE_MASK to a signed type so that it is sign-extended if
- virtual addresses are 32-bits but physical addresses are larger
- (ie, 32-bit PAE). */
-#define PHYSICAL_PAGE_MASK (((signed long)PAGE_MASK) & __PHYSICAL_MASK)
-
-/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
-#define PTE_PFN_MASK ((pteval_t)PHYSICAL_PAGE_MASK)
-
-/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
-#define PTE_FLAGS_MASK (~PTE_PFN_MASK)
-
-#define PMD_PAGE_SIZE (_AC(1, UL) << PMD_SHIFT)
-#define PMD_PAGE_MASK (~(PMD_PAGE_SIZE-1))
-
-#define HPAGE_SHIFT PMD_SHIFT
-#define HPAGE_SIZE (_AC(1,UL) << HPAGE_SHIFT)
-#define HPAGE_MASK (~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
-
-#define HUGE_MAX_HSTATE 2
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#endif
+#include <asm/page_types.h>
#ifdef CONFIG_X86_64
#include <asm/page_64.h>
#include <asm/page_32.h>
#endif /* CONFIG_X86_64 */
-#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET)
-
-#define VM_DATA_DEFAULT_FLAGS \
- (((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
- VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-
#ifndef __ASSEMBLY__
-typedef struct { pgdval_t pgd; } pgd_t;
-typedef struct { pgprotval_t pgprot; } pgprot_t;
-
-extern int page_is_ram(unsigned long pagenr);
-extern int pagerange_is_ram(unsigned long start, unsigned long end);
-extern int devmem_is_allowed(unsigned long pagenr);
-extern void map_devmem(unsigned long pfn, unsigned long size,
- pgprot_t vma_prot);
-extern void unmap_devmem(unsigned long pfn, unsigned long size,
- pgprot_t vma_prot);
-
-extern unsigned long max_low_pfn_mapped;
-extern unsigned long max_pfn_mapped;
-
struct page;
static inline void clear_user_page(void *page, unsigned long vaddr,
- struct page *pg)
+ struct page *pg)
{
clear_page(page);
}
static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
- struct page *topage)
+ struct page *topage)
{
copy_page(to, from);
}
alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-static inline pgd_t native_make_pgd(pgdval_t val)
-{
- return (pgd_t) { val };
-}
-
-static inline pgdval_t native_pgd_val(pgd_t pgd)
-{
- return pgd.pgd;
-}
-
-#if PAGETABLE_LEVELS >= 3
-#if PAGETABLE_LEVELS == 4
-typedef struct { pudval_t pud; } pud_t;
-
-static inline pud_t native_make_pud(pmdval_t val)
-{
- return (pud_t) { val };
-}
-
-static inline pudval_t native_pud_val(pud_t pud)
-{
- return pud.pud;
-}
-#else /* PAGETABLE_LEVELS == 3 */
-#include <asm-generic/pgtable-nopud.h>
-
-static inline pudval_t native_pud_val(pud_t pud)
-{
- return native_pgd_val(pud.pgd);
-}
-#endif /* PAGETABLE_LEVELS == 4 */
-
-typedef struct { pmdval_t pmd; } pmd_t;
-
-static inline pmd_t native_make_pmd(pmdval_t val)
-{
- return (pmd_t) { val };
-}
-
-static inline pmdval_t native_pmd_val(pmd_t pmd)
-{
- return pmd.pmd;
-}
-#else /* PAGETABLE_LEVELS == 2 */
-#include <asm-generic/pgtable-nopmd.h>
-
-static inline pmdval_t native_pmd_val(pmd_t pmd)
-{
- return native_pgd_val(pmd.pud.pgd);
-}
-#endif /* PAGETABLE_LEVELS >= 3 */
-
-static inline pte_t native_make_pte(pteval_t val)
-{
- return (pte_t) { .pte = val };
-}
-
-static inline pteval_t native_pte_val(pte_t pte)
-{
- return pte.pte;
-}
-
-static inline pteval_t pte_flags(pte_t pte)
-{
- return native_pte_val(pte) & PTE_FLAGS_MASK;
-}
-
-#define pgprot_val(x) ((x).pgprot)
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else /* !CONFIG_PARAVIRT */
-
-#define pgd_val(x) native_pgd_val(x)
-#define __pgd(x) native_make_pgd(x)
-
-#ifndef __PAGETABLE_PUD_FOLDED
-#define pud_val(x) native_pud_val(x)
-#define __pud(x) native_make_pud(x)
-#endif
-
-#ifndef __PAGETABLE_PMD_FOLDED
-#define pmd_val(x) native_pmd_val(x)
-#define __pmd(x) native_make_pmd(x)
-#endif
-
-#define pte_val(x) native_pte_val(x)
-#define __pte(x) native_make_pte(x)
-
-#endif /* CONFIG_PARAVIRT */
-
#define __pa(x) __phys_addr((unsigned long)(x))
#define __pa_nodebug(x) __phys_addr_nodebug((unsigned long)(x))
/* __pa_symbol should be used for C visible symbols.
#ifndef _ASM_X86_PAGE_32_H
#define _ASM_X86_PAGE_32_H
-/*
- * This handles the memory map.
- *
- * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
- * a virtual address space of one gigabyte, which limits the
- * amount of physical memory you can use to about 950MB.
- *
- * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
- * and CONFIG_HIGHMEM64G options in the kernel configuration.
- */
-#define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
-
-#ifdef CONFIG_4KSTACKS
-#define THREAD_ORDER 0
-#else
-#define THREAD_ORDER 1
-#endif
-#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
-
-#define STACKFAULT_STACK 0
-#define DOUBLEFAULT_STACK 1
-#define NMI_STACK 0
-#define DEBUG_STACK 0
-#define MCE_STACK 0
-#define N_EXCEPTION_STACKS 1
-
-#ifdef CONFIG_X86_PAE
-/* 44=32+12, the limit we can fit into an unsigned long pfn */
-#define __PHYSICAL_MASK_SHIFT 44
-#define __VIRTUAL_MASK_SHIFT 32
-#define PAGETABLE_LEVELS 3
-
-#ifndef __ASSEMBLY__
-typedef u64 pteval_t;
-typedef u64 pmdval_t;
-typedef u64 pudval_t;
-typedef u64 pgdval_t;
-typedef u64 pgprotval_t;
-
-typedef union {
- struct {
- unsigned long pte_low, pte_high;
- };
- pteval_t pte;
-} pte_t;
-#endif /* __ASSEMBLY__
- */
-#else /* !CONFIG_X86_PAE */
-#define __PHYSICAL_MASK_SHIFT 32
-#define __VIRTUAL_MASK_SHIFT 32
-#define PAGETABLE_LEVELS 2
-
-#ifndef __ASSEMBLY__
-typedef unsigned long pteval_t;
-typedef unsigned long pmdval_t;
-typedef unsigned long pudval_t;
-typedef unsigned long pgdval_t;
-typedef unsigned long pgprotval_t;
-
-typedef union {
- pteval_t pte;
- pteval_t pte_low;
-} pte_t;
-
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_X86_PAE */
+#include <asm/page_32_types.h>
#ifndef __ASSEMBLY__
-typedef struct page *pgtable_t;
-#endif
#ifdef CONFIG_HUGETLB_PAGE
#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
#endif
-#ifndef __ASSEMBLY__
#define __phys_addr_nodebug(x) ((x) - PAGE_OFFSET)
#ifdef CONFIG_DEBUG_VIRTUAL
extern unsigned long __phys_addr(unsigned long);
#define pfn_valid(pfn) ((pfn) < max_mapnr)
#endif /* CONFIG_FLATMEM */
-extern int nx_enabled;
-
-/*
- * This much address space is reserved for vmalloc() and iomap()
- * as well as fixmap mappings.
- */
-extern unsigned int __VMALLOC_RESERVE;
-extern int sysctl_legacy_va_layout;
-
-extern void find_low_pfn_range(void);
-extern unsigned long init_memory_mapping(unsigned long start,
- unsigned long end);
-extern void initmem_init(unsigned long, unsigned long);
-extern void free_initmem(void);
-extern void setup_bootmem_allocator(void);
-
-
#ifdef CONFIG_X86_USE_3DNOW
#include <asm/mmx.h>
--- /dev/null
+#ifndef _ASM_X86_PAGE_32_DEFS_H
+#define _ASM_X86_PAGE_32_DEFS_H
+
+#include <linux/const.h>
+
+/*
+ * This handles the memory map.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ *
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
+ * and CONFIG_HIGHMEM64G options in the kernel configuration.
+ */
+#define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_ORDER 0
+#else
+#define THREAD_ORDER 1
+#endif
+#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
+
+#define STACKFAULT_STACK 0
+#define DOUBLEFAULT_STACK 1
+#define NMI_STACK 0
+#define DEBUG_STACK 0
+#define MCE_STACK 0
+#define N_EXCEPTION_STACKS 1
+
+#ifdef CONFIG_X86_PAE
+/* 44=32+12, the limit we can fit into an unsigned long pfn */
+#define __PHYSICAL_MASK_SHIFT 44
+#define __VIRTUAL_MASK_SHIFT 32
+#define PAGETABLE_LEVELS 3
+
+#else /* !CONFIG_X86_PAE */
+#define __PHYSICAL_MASK_SHIFT 32
+#define __VIRTUAL_MASK_SHIFT 32
+#define PAGETABLE_LEVELS 2
+#endif /* CONFIG_X86_PAE */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This much address space is reserved for vmalloc() and iomap()
+ * as well as fixmap mappings.
+ */
+extern unsigned int __VMALLOC_RESERVE;
+extern int sysctl_legacy_va_layout;
+
+extern void find_low_pfn_range(void);
+extern unsigned long init_memory_mapping(unsigned long start,
+ unsigned long end);
+extern void initmem_init(unsigned long, unsigned long);
+extern void free_initmem(void);
+extern void setup_bootmem_allocator(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PAGE_32_DEFS_H */
#ifndef _ASM_X86_PAGE_64_H
#define _ASM_X86_PAGE_64_H
-#define PAGETABLE_LEVELS 4
-
-#define THREAD_ORDER 1
-#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
-#define CURRENT_MASK (~(THREAD_SIZE - 1))
-
-#define EXCEPTION_STACK_ORDER 0
-#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
-
-#define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
-#define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
-
-#define IRQ_STACK_ORDER 2
-#define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER)
-
-#define STACKFAULT_STACK 1
-#define DOUBLEFAULT_STACK 2
-#define NMI_STACK 3
-#define DEBUG_STACK 4
-#define MCE_STACK 5
-#define N_EXCEPTION_STACKS 5 /* hw limit: 7 */
-
-#define PUD_PAGE_SIZE (_AC(1, UL) << PUD_SHIFT)
-#define PUD_PAGE_MASK (~(PUD_PAGE_SIZE-1))
-
-/*
- * Set __PAGE_OFFSET to the most negative possible address +
- * PGDIR_SIZE*16 (pgd slot 272). The gap is to allow a space for a
- * hypervisor to fit. Choosing 16 slots here is arbitrary, but it's
- * what Xen requires.
- */
-#define __PAGE_OFFSET _AC(0xffff880000000000, UL)
-
-#define __PHYSICAL_START CONFIG_PHYSICAL_START
-#define __KERNEL_ALIGN 0x200000
-
-/*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
-#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
-#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
-#endif
-
-#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
-#define __START_KERNEL_map _AC(0xffffffff80000000, UL)
-
-/* See Documentation/x86_64/mm.txt for a description of the memory map. */
-#define __PHYSICAL_MASK_SHIFT 46
-#define __VIRTUAL_MASK_SHIFT 48
-
-/*
- * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
- * arch/x86/kernel/head_64.S), and it is mapped here:
- */
-#define KERNEL_IMAGE_SIZE (512 * 1024 * 1024)
-#define KERNEL_IMAGE_START _AC(0xffffffff80000000, UL)
-
-#ifndef __ASSEMBLY__
-void clear_page(void *page);
-void copy_page(void *to, void *from);
-
-/* duplicated to the one in bootmem.h */
-extern unsigned long max_pfn;
-extern unsigned long phys_base;
-
-extern unsigned long __phys_addr(unsigned long);
-#define __phys_reloc_hide(x) (x)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef unsigned long pteval_t;
-typedef unsigned long pmdval_t;
-typedef unsigned long pudval_t;
-typedef unsigned long pgdval_t;
-typedef unsigned long pgprotval_t;
-
-typedef struct page *pgtable_t;
-
-typedef struct { pteval_t pte; } pte_t;
-
-#define vmemmap ((struct page *)VMEMMAP_START)
-
-extern unsigned long init_memory_mapping(unsigned long start,
- unsigned long end);
-
-extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
-extern void free_initmem(void);
-
-extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
-extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
-
-#endif /* !__ASSEMBLY__ */
-
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) < max_pfn)
-#endif
-
+#include <asm/page_64_types.h>
#endif /* _ASM_X86_PAGE_64_H */
--- /dev/null
+***************
+*** 1,105 ****
+ #ifndef _ASM_X86_PAGE_64_H
+ #define _ASM_X86_PAGE_64_H
+
+- #define PAGETABLE_LEVELS 4
+-
+- #define THREAD_ORDER 1
+- #define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
+- #define CURRENT_MASK (~(THREAD_SIZE - 1))
+-
+- #define EXCEPTION_STACK_ORDER 0
+- #define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
+-
+- #define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
+- #define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
+-
+- #define IRQSTACK_ORDER 2
+- #define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER)
+-
+- #define STACKFAULT_STACK 1
+- #define DOUBLEFAULT_STACK 2
+- #define NMI_STACK 3
+- #define DEBUG_STACK 4
+- #define MCE_STACK 5
+- #define N_EXCEPTION_STACKS 5 /* hw limit: 7 */
+-
+- #define PUD_PAGE_SIZE (_AC(1, UL) << PUD_SHIFT)
+- #define PUD_PAGE_MASK (~(PUD_PAGE_SIZE-1))
+-
+- /*
+- * Set __PAGE_OFFSET to the most negative possible address +
+- * PGDIR_SIZE*16 (pgd slot 272). The gap is to allow a space for a
+- * hypervisor to fit. Choosing 16 slots here is arbitrary, but it's
+- * what Xen requires.
+- */
+- #define __PAGE_OFFSET _AC(0xffff880000000000, UL)
+-
+- #define __PHYSICAL_START CONFIG_PHYSICAL_START
+- #define __KERNEL_ALIGN 0x200000
+-
+- /*
+- * Make sure kernel is aligned to 2MB address. Catching it at compile
+- * time is better. Change your config file and compile the kernel
+- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+- */
+- #if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
+- #error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
+- #endif
+-
+- #define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
+- #define __START_KERNEL_map _AC(0xffffffff80000000, UL)
+-
+- /* See Documentation/x86_64/mm.txt for a description of the memory map. */
+- #define __PHYSICAL_MASK_SHIFT 46
+- #define __VIRTUAL_MASK_SHIFT 48
+-
+- /*
+- * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
+- * arch/x86/kernel/head_64.S), and it is mapped here:
+- */
+- #define KERNEL_IMAGE_SIZE (512 * 1024 * 1024)
+- #define KERNEL_IMAGE_START _AC(0xffffffff80000000, UL)
+-
+- #ifndef __ASSEMBLY__
+- void clear_page(void *page);
+- void copy_page(void *to, void *from);
+-
+- /* duplicated to the one in bootmem.h */
+- extern unsigned long max_pfn;
+- extern unsigned long phys_base;
+-
+- extern unsigned long __phys_addr(unsigned long);
+- #define __phys_reloc_hide(x) (x)
+-
+- /*
+- * These are used to make use of C type-checking..
+- */
+- typedef unsigned long pteval_t;
+- typedef unsigned long pmdval_t;
+- typedef unsigned long pudval_t;
+- typedef unsigned long pgdval_t;
+- typedef unsigned long pgprotval_t;
+-
+- typedef struct page *pgtable_t;
+-
+- typedef struct { pteval_t pte; } pte_t;
+-
+- #define vmemmap ((struct page *)VMEMMAP_START)
+-
+- extern unsigned long init_memory_mapping(unsigned long start,
+- unsigned long end);
+-
+- extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+- extern void free_initmem(void);
+-
+- extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
+- extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
+-
+- #endif /* !__ASSEMBLY__ */
+-
+- #ifdef CONFIG_FLATMEM
+- #define pfn_valid(pfn) ((pfn) < max_pfn)
+- #endif
+-
+
+ #endif /* _ASM_X86_PAGE_64_H */
+--- 1,6 ----
+ #ifndef _ASM_X86_PAGE_64_H
+ #define _ASM_X86_PAGE_64_H
+
++ #include <asm/page_64_types.h>
+
+ #endif /* _ASM_X86_PAGE_64_H */
--- /dev/null
+#ifndef _ASM_X86_PAGE_64_DEFS_H
+#define _ASM_X86_PAGE_64_DEFS_H
+
+#define PAGETABLE_LEVELS 4
+
+#define THREAD_ORDER 1
+#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
+#define CURRENT_MASK (~(THREAD_SIZE - 1))
+
+#define EXCEPTION_STACK_ORDER 0
+#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
+
+#define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1)
+#define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER)
+
+#define IRQ_STACK_ORDER 2
+#define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER)
+
+#define STACKFAULT_STACK 1
+#define DOUBLEFAULT_STACK 2
+#define NMI_STACK 3
+#define DEBUG_STACK 4
+#define MCE_STACK 5
+#define N_EXCEPTION_STACKS 5 /* hw limit: 7 */
+
+#define PUD_PAGE_SIZE (_AC(1, UL) << PUD_SHIFT)
+#define PUD_PAGE_MASK (~(PUD_PAGE_SIZE-1))
+
+/*
+ * Set __PAGE_OFFSET to the most negative possible address +
+ * PGDIR_SIZE*16 (pgd slot 272). The gap is to allow a space for a
+ * hypervisor to fit. Choosing 16 slots here is arbitrary, but it's
+ * what Xen requires.
+ */
+#define __PAGE_OFFSET _AC(0xffff880000000000, UL)
+
+#define __PHYSICAL_START CONFIG_PHYSICAL_START
+#define __KERNEL_ALIGN 0x200000
+
+/*
+ * Make sure kernel is aligned to 2MB address. Catching it at compile
+ * time is better. Change your config file and compile the kernel
+ * for a 2MB aligned address (CONFIG_PHYSICAL_START)
+ */
+#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
+#endif
+
+#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
+#define __START_KERNEL_map _AC(0xffffffff80000000, UL)
+
+/* See Documentation/x86_64/mm.txt for a description of the memory map. */
+#define __PHYSICAL_MASK_SHIFT 46
+#define __VIRTUAL_MASK_SHIFT 48
+
+/*
+ * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
+ * arch/x86/kernel/head_64.S), and it is mapped here:
+ */
+#define KERNEL_IMAGE_SIZE (512 * 1024 * 1024)
+#define KERNEL_IMAGE_START _AC(0xffffffff80000000, UL)
+
+#ifndef __ASSEMBLY__
+void clear_page(void *page);
+void copy_page(void *to, void *from);
+
+/* duplicated to the one in bootmem.h */
+extern unsigned long max_pfn;
+extern unsigned long phys_base;
+
+extern unsigned long __phys_addr(unsigned long);
+#define __phys_reloc_hide(x) (x)
+
+#define vmemmap ((struct page *)VMEMMAP_START)
+
+extern unsigned long init_memory_mapping(unsigned long start,
+ unsigned long end);
+
+extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void free_initmem(void);
+
+extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
+extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn) ((pfn) < max_pfn)
+#endif
+
+#endif /* _ASM_X86_PAGE_64_DEFS_H */
--- /dev/null
+#ifndef _ASM_X86_PAGE_DEFS_H
+#define _ASM_X86_PAGE_DEFS_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#define __PHYSICAL_MASK ((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
+#define __VIRTUAL_MASK ((1UL << __VIRTUAL_MASK_SHIFT) - 1)
+
+/* Cast PAGE_MASK to a signed type so that it is sign-extended if
+ virtual addresses are 32-bits but physical addresses are larger
+ (ie, 32-bit PAE). */
+#define PHYSICAL_PAGE_MASK (((signed long)PAGE_MASK) & __PHYSICAL_MASK)
+
+/* PTE_PFN_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_PFN_MASK ((pteval_t)PHYSICAL_PAGE_MASK)
+
+/* PTE_FLAGS_MASK extracts the flags from a (pte|pmd|pud|pgd)val_t */
+#define PTE_FLAGS_MASK (~PTE_PFN_MASK)
+
+#define PMD_PAGE_SIZE (_AC(1, UL) << PMD_SHIFT)
+#define PMD_PAGE_MASK (~(PMD_PAGE_SIZE-1))
+
+#define HPAGE_SHIFT PMD_SHIFT
+#define HPAGE_SIZE (_AC(1,UL) << HPAGE_SHIFT)
+#define HPAGE_MASK (~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+
+#define HUGE_MAX_HSTATE 2
+
+#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET)
+
+#define VM_DATA_DEFAULT_FLAGS \
+ (((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+ VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifdef CONFIG_X86_64
+#include <asm/page_64_types.h>
+#else
+#include <asm/page_32_types.h>
+#endif /* CONFIG_X86_64 */
+
+#ifndef __ASSEMBLY__
+
+struct pgprot;
+
+extern int page_is_ram(unsigned long pagenr);
+extern int devmem_is_allowed(unsigned long pagenr);
+extern void map_devmem(unsigned long pfn, unsigned long size,
+ struct pgprot vma_prot);
+extern void unmap_devmem(unsigned long pfn, unsigned long size,
+ struct pgprot vma_prot);
+
+extern unsigned long max_low_pfn_mapped;
+extern unsigned long max_pfn_mapped;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PAGE_DEFS_H */
* para-virtualization: those hooks are defined here. */
#ifdef CONFIG_PARAVIRT
-#include <asm/page.h>
+#include <asm/pgtable_types.h>
#include <asm/asm.h>
/* Bitmask of what can be clobbered: usually at least eax. */
PVOP_VCALL0(pv_cpu_ops.lazy_mode.leave);
}
-static inline void arch_flush_lazy_cpu_mode(void)
-{
- if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)) {
- arch_leave_lazy_cpu_mode();
- arch_enter_lazy_cpu_mode();
- }
-}
-
+void arch_flush_lazy_cpu_mode(void);
#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
static inline void arch_enter_lazy_mmu_mode(void)
PVOP_VCALL0(pv_mmu_ops.lazy_mode.leave);
}
-static inline void arch_flush_lazy_mmu_mode(void)
-{
- if (unlikely(paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU)) {
- arch_leave_lazy_mmu_mode();
- arch_enter_lazy_mmu_mode();
- }
-}
+void arch_flush_lazy_mmu_mode(void);
static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
unsigned long phys, pgprot_t flags)
#define PER_CPU_VAR(var) per_cpu__##var
#endif /* SMP */
+#ifdef CONFIG_X86_64_SMP
+#define INIT_PER_CPU_VAR(var) init_per_cpu__##var
+#else
+#define INIT_PER_CPU_VAR(var) per_cpu__##var
+#endif
+
#else /* ...!ASSEMBLY */
#include <linux/stringify.h>
#define __percpu_arg(x) "%" #x
#endif
+/*
+ * Initialized pointers to per-cpu variables needed for the boot
+ * processor need to use these macros to get the proper address
+ * offset from __per_cpu_load on SMP.
+ *
+ * There also must be an entry in vmlinux_64.lds.S
+ */
+#define DECLARE_INIT_PER_CPU(var) \
+ extern typeof(per_cpu_var(var)) init_per_cpu_var(var)
+
+#ifdef CONFIG_X86_64_SMP
+#define init_per_cpu_var(var) init_per_cpu__##var
+#else
+#define init_per_cpu_var(var) per_cpu_var(var)
+#endif
+
/* For arch-specific code, we can use direct single-insn ops (they
* don't give an lvalue though). */
extern void __bad_percpu_size(void);
#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
#endif
-#define pte_none(x) (!(x).pte_low)
-
/*
* Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken,
* split up the 29 bits of offset into this range:
#ifndef _ASM_X86_PGTABLE_2LEVEL_DEFS_H
#define _ASM_X86_PGTABLE_2LEVEL_DEFS_H
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+typedef unsigned long pteval_t;
+typedef unsigned long pmdval_t;
+typedef unsigned long pudval_t;
+typedef unsigned long pgdval_t;
+typedef unsigned long pgprotval_t;
+
+typedef union {
+ pteval_t pte;
+ pteval_t pte_low;
+} pte_t;
+#endif /* !__ASSEMBLY__ */
+
#define SHARED_KERNEL_PMD 0
/*
printk("%s:%d: bad pgd %p(%016Lx).\n", \
__FILE__, __LINE__, &(e), pgd_val(e))
-static inline int pud_none(pud_t pud)
-{
- return pud_val(pud) == 0;
-}
-
-static inline int pud_bad(pud_t pud)
-{
- return (pud_val(pud) & ~(PTE_PFN_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
-}
-
-static inline int pud_present(pud_t pud)
-{
- return pud_val(pud) & _PAGE_PRESENT;
-}
-
/* Rules for using set_pte: the pte being assigned *must* be
* either not present or in a state where the hardware will
* not attempt to update the pte. In places where this is
write_cr3(pgd);
}
-#define pud_page(pud) pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
-
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_PFN_MASK))
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(pud, address) ((pmd_t *)pud_page_vaddr(*(pud)) + \
- pmd_index(address))
-
#ifdef CONFIG_SMP
static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
{
#define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
#endif
-#define __HAVE_ARCH_PTE_SAME
-static inline int pte_same(pte_t a, pte_t b)
-{
- return a.pte_low == b.pte_low && a.pte_high == b.pte_high;
-}
-
-static inline int pte_none(pte_t pte)
-{
- return !pte.pte_low && !pte.pte_high;
-}
-
/*
* Bits 0, 6 and 7 are taken in the low part of the pte,
* put the 32 bits of offset into the high part.
#ifndef _ASM_X86_PGTABLE_3LEVEL_DEFS_H
#define _ASM_X86_PGTABLE_3LEVEL_DEFS_H
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+typedef u64 pteval_t;
+typedef u64 pmdval_t;
+typedef u64 pudval_t;
+typedef u64 pgdval_t;
+typedef u64 pgprotval_t;
+
+typedef union {
+ struct {
+ unsigned long pte_low, pte_high;
+ };
+ pteval_t pte;
+} pte_t;
+#endif /* !__ASSEMBLY__ */
+
#ifdef CONFIG_PARAVIRT
#define SHARED_KERNEL_PMD (pv_info.shared_kernel_pmd)
#else
*/
#define PTRS_PER_PTE 512
+
#endif /* _ASM_X86_PGTABLE_3LEVEL_DEFS_H */
#ifndef _ASM_X86_PGTABLE_H
#define _ASM_X86_PGTABLE_H
-#define FIRST_USER_ADDRESS 0
-
-#define _PAGE_BIT_PRESENT 0 /* is present */
-#define _PAGE_BIT_RW 1 /* writeable */
-#define _PAGE_BIT_USER 2 /* userspace addressable */
-#define _PAGE_BIT_PWT 3 /* page write through */
-#define _PAGE_BIT_PCD 4 /* page cache disabled */
-#define _PAGE_BIT_ACCESSED 5 /* was accessed (raised by CPU) */
-#define _PAGE_BIT_DIRTY 6 /* was written to (raised by CPU) */
-#define _PAGE_BIT_PSE 7 /* 4 MB (or 2MB) page */
-#define _PAGE_BIT_PAT 7 /* on 4KB pages */
-#define _PAGE_BIT_GLOBAL 8 /* Global TLB entry PPro+ */
-#define _PAGE_BIT_UNUSED1 9 /* available for programmer */
-#define _PAGE_BIT_IOMAP 10 /* flag used to indicate IO mapping */
-#define _PAGE_BIT_UNUSED3 11
-#define _PAGE_BIT_PAT_LARGE 12 /* On 2MB or 1GB pages */
-#define _PAGE_BIT_SPECIAL _PAGE_BIT_UNUSED1
-#define _PAGE_BIT_CPA_TEST _PAGE_BIT_UNUSED1
-#define _PAGE_BIT_NX 63 /* No execute: only valid after cpuid check */
-
-/* If _PAGE_BIT_PRESENT is clear, we use these: */
-/* - if the user mapped it with PROT_NONE; pte_present gives true */
-#define _PAGE_BIT_PROTNONE _PAGE_BIT_GLOBAL
-/* - set: nonlinear file mapping, saved PTE; unset:swap */
-#define _PAGE_BIT_FILE _PAGE_BIT_DIRTY
-
-#define _PAGE_PRESENT (_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
-#define _PAGE_RW (_AT(pteval_t, 1) << _PAGE_BIT_RW)
-#define _PAGE_USER (_AT(pteval_t, 1) << _PAGE_BIT_USER)
-#define _PAGE_PWT (_AT(pteval_t, 1) << _PAGE_BIT_PWT)
-#define _PAGE_PCD (_AT(pteval_t, 1) << _PAGE_BIT_PCD)
-#define _PAGE_ACCESSED (_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED)
-#define _PAGE_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_DIRTY)
-#define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE)
-#define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
-#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
-#define _PAGE_IOMAP (_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
-#define _PAGE_UNUSED3 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
-#define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT)
-#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
-#define _PAGE_SPECIAL (_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
-#define _PAGE_CPA_TEST (_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
-#define __HAVE_ARCH_PTE_SPECIAL
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-#define _PAGE_NX (_AT(pteval_t, 1) << _PAGE_BIT_NX)
-#else
-#define _PAGE_NX (_AT(pteval_t, 0))
-#endif
+#include <asm/page.h>
-#define _PAGE_FILE (_AT(pteval_t, 1) << _PAGE_BIT_FILE)
-#define _PAGE_PROTNONE (_AT(pteval_t, 1) << _PAGE_BIT_PROTNONE)
-
-#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
- _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \
- _PAGE_DIRTY)
-
-/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK (PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT | \
- _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-#define _PAGE_CACHE_MASK (_PAGE_PCD | _PAGE_PWT)
-#define _PAGE_CACHE_WB (0)
-#define _PAGE_CACHE_WC (_PAGE_PWT)
-#define _PAGE_CACHE_UC_MINUS (_PAGE_PCD)
-#define _PAGE_CACHE_UC (_PAGE_PCD | _PAGE_PWT)
-
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
- _PAGE_ACCESSED | _PAGE_NX)
-
-#define PAGE_SHARED_EXEC __pgprot(_PAGE_PRESENT | _PAGE_RW | \
- _PAGE_USER | _PAGE_ACCESSED)
-#define PAGE_COPY_NOEXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
- _PAGE_ACCESSED | _PAGE_NX)
-#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
- _PAGE_ACCESSED)
-#define PAGE_COPY PAGE_COPY_NOEXEC
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | \
- _PAGE_ACCESSED | _PAGE_NX)
-#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
- _PAGE_ACCESSED)
-
-#define __PAGE_KERNEL_EXEC \
- (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
-#define __PAGE_KERNEL (__PAGE_KERNEL_EXEC | _PAGE_NX)
-
-#define __PAGE_KERNEL_RO (__PAGE_KERNEL & ~_PAGE_RW)
-#define __PAGE_KERNEL_RX (__PAGE_KERNEL_EXEC & ~_PAGE_RW)
-#define __PAGE_KERNEL_EXEC_NOCACHE (__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
-#define __PAGE_KERNEL_WC (__PAGE_KERNEL | _PAGE_CACHE_WC)
-#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
-#define __PAGE_KERNEL_UC_MINUS (__PAGE_KERNEL | _PAGE_PCD)
-#define __PAGE_KERNEL_VSYSCALL (__PAGE_KERNEL_RX | _PAGE_USER)
-#define __PAGE_KERNEL_VSYSCALL_NOCACHE (__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
-#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
-#define __PAGE_KERNEL_LARGE_NOCACHE (__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
-#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
-
-#define __PAGE_KERNEL_IO (__PAGE_KERNEL | _PAGE_IOMAP)
-#define __PAGE_KERNEL_IO_NOCACHE (__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP)
-#define __PAGE_KERNEL_IO_UC_MINUS (__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP)
-#define __PAGE_KERNEL_IO_WC (__PAGE_KERNEL_WC | _PAGE_IOMAP)
-
-#define PAGE_KERNEL __pgprot(__PAGE_KERNEL)
-#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO)
-#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC)
-#define PAGE_KERNEL_RX __pgprot(__PAGE_KERNEL_RX)
-#define PAGE_KERNEL_WC __pgprot(__PAGE_KERNEL_WC)
-#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE)
-#define PAGE_KERNEL_UC_MINUS __pgprot(__PAGE_KERNEL_UC_MINUS)
-#define PAGE_KERNEL_EXEC_NOCACHE __pgprot(__PAGE_KERNEL_EXEC_NOCACHE)
-#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE)
-#define PAGE_KERNEL_LARGE_NOCACHE __pgprot(__PAGE_KERNEL_LARGE_NOCACHE)
-#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
-#define PAGE_KERNEL_VSYSCALL __pgprot(__PAGE_KERNEL_VSYSCALL)
-#define PAGE_KERNEL_VSYSCALL_NOCACHE __pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
-
-#define PAGE_KERNEL_IO __pgprot(__PAGE_KERNEL_IO)
-#define PAGE_KERNEL_IO_NOCACHE __pgprot(__PAGE_KERNEL_IO_NOCACHE)
-#define PAGE_KERNEL_IO_UC_MINUS __pgprot(__PAGE_KERNEL_IO_UC_MINUS)
-#define PAGE_KERNEL_IO_WC __pgprot(__PAGE_KERNEL_IO_WC)
-
-/* xwr */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY
-#define __P100 PAGE_READONLY_EXEC
-#define __P101 PAGE_READONLY_EXEC
-#define __P110 PAGE_COPY_EXEC
-#define __P111 PAGE_COPY_EXEC
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED
-#define __S100 PAGE_READONLY_EXEC
-#define __S101 PAGE_READONLY_EXEC
-#define __S110 PAGE_SHARED_EXEC
-#define __S111 PAGE_SHARED_EXEC
-
-/*
- * early identity mapping pte attrib macros.
- */
-#ifdef CONFIG_X86_64
-#define __PAGE_KERNEL_IDENT_LARGE_EXEC __PAGE_KERNEL_LARGE_EXEC
-#else
-/*
- * For PDE_IDENT_ATTR include USER bit. As the PDE and PTE protection
- * bits are combined, this will alow user to access the high address mapped
- * VDSO in the presence of CONFIG_COMPAT_VDSO
- */
-#define PTE_IDENT_ATTR 0x003 /* PRESENT+RW */
-#define PDE_IDENT_ATTR 0x067 /* PRESENT+RW+USER+DIRTY+ACCESSED */
-#define PGD_IDENT_ATTR 0x001 /* PRESENT (no other attributes) */
-#endif
+#include <asm/pgtable_types.h>
/*
* Macro to mark a page protection value as UC-
#ifndef __ASSEMBLY__
-#define pgprot_writecombine pgprot_writecombine
-extern pgprot_t pgprot_writecombine(pgprot_t prot);
-
/*
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
extern spinlock_t pgd_lock;
extern struct list_head pgd_list;
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else /* !CONFIG_PARAVIRT */
+#define set_pte(ptep, pte) native_set_pte(ptep, pte)
+#define set_pte_at(mm, addr, ptep, pte) native_set_pte_at(mm, addr, ptep, pte)
+
+#define set_pte_present(mm, addr, ptep, pte) \
+ native_set_pte_present(mm, addr, ptep, pte)
+#define set_pte_atomic(ptep, pte) \
+ native_set_pte_atomic(ptep, pte)
+
+#define set_pmd(pmdp, pmd) native_set_pmd(pmdp, pmd)
+
+#ifndef __PAGETABLE_PUD_FOLDED
+#define set_pgd(pgdp, pgd) native_set_pgd(pgdp, pgd)
+#define pgd_clear(pgd) native_pgd_clear(pgd)
+#endif
+
+#ifndef set_pud
+# define set_pud(pudp, pud) native_set_pud(pudp, pud)
+#endif
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define pud_clear(pud) native_pud_clear(pud)
+#endif
+
+#define pte_clear(mm, addr, ptep) native_pte_clear(mm, addr, ptep)
+#define pmd_clear(pmd) native_pmd_clear(pmd)
+
+#define pte_update(mm, addr, ptep) do { } while (0)
+#define pte_update_defer(mm, addr, ptep) do { } while (0)
+
+static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
+{
+ native_pagetable_setup_start(base);
+}
+
+static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
+{
+ native_pagetable_setup_done(base);
+}
+
+#define pgd_val(x) native_pgd_val(x)
+#define __pgd(x) native_make_pgd(x)
+
+#ifndef __PAGETABLE_PUD_FOLDED
+#define pud_val(x) native_pud_val(x)
+#define __pud(x) native_make_pud(x)
+#endif
+
+#ifndef __PAGETABLE_PMD_FOLDED
+#define pmd_val(x) native_pmd_val(x)
+#define __pmd(x) native_make_pmd(x)
+#endif
+
+#define pte_val(x) native_pte_val(x)
+#define __pte(x) native_make_pte(x)
+
+#endif /* CONFIG_PARAVIRT */
+
/*
* The following only work if pte_present() is true.
* Undefined behaviour if not..
static inline int pmd_large(pmd_t pte)
{
- return (pmd_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+ return (pmd_flags(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
(_PAGE_PSE | _PAGE_PRESENT);
}
return pte_set_flags(pte, _PAGE_SPECIAL);
}
-extern pteval_t __supported_pte_mask;
-
/*
* Mask out unsupported bits in a present pgprot. Non-present pgprots
* can use those bits for other purposes, so leave them be.
return 1;
}
-#ifndef __ASSEMBLY__
-/* Indicate that x86 has its own track and untrack pfn vma functions */
-#define __HAVE_PFNMAP_TRACKING
-
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-struct file;
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
- unsigned long size, pgprot_t vma_prot);
-int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
- unsigned long size, pgprot_t *vma_prot);
-#endif
-
-/* Install a pte for a particular vaddr in kernel space. */
-void set_pte_vaddr(unsigned long vaddr, pte_t pte);
+#endif /* __ASSEMBLY__ */
#ifdef CONFIG_X86_32
-extern void native_pagetable_setup_start(pgd_t *base);
-extern void native_pagetable_setup_done(pgd_t *base);
+# include "pgtable_32.h"
#else
-static inline void native_pagetable_setup_start(pgd_t *base) {}
-static inline void native_pagetable_setup_done(pgd_t *base) {}
+# include "pgtable_64.h"
#endif
-struct seq_file;
-extern void arch_report_meminfo(struct seq_file *m);
+#ifndef __ASSEMBLY__
+#include <linux/mm_types.h>
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else /* !CONFIG_PARAVIRT */
-#define set_pte(ptep, pte) native_set_pte(ptep, pte)
-#define set_pte_at(mm, addr, ptep, pte) native_set_pte_at(mm, addr, ptep, pte)
+static inline int pte_none(pte_t pte)
+{
+ return !pte.pte;
+}
-#define set_pte_present(mm, addr, ptep, pte) \
- native_set_pte_present(mm, addr, ptep, pte)
-#define set_pte_atomic(ptep, pte) \
- native_set_pte_atomic(ptep, pte)
+#define __HAVE_ARCH_PTE_SAME
+static inline int pte_same(pte_t a, pte_t b)
+{
+ return a.pte == b.pte;
+}
-#define set_pmd(pmdp, pmd) native_set_pmd(pmdp, pmd)
+static inline int pte_present(pte_t a)
+{
+ return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE);
+}
-#ifndef __PAGETABLE_PUD_FOLDED
-#define set_pgd(pgdp, pgd) native_set_pgd(pgdp, pgd)
-#define pgd_clear(pgd) native_pgd_clear(pgd)
-#endif
+static inline int pmd_present(pmd_t pmd)
+{
+ return pmd_flags(pmd) & _PAGE_PRESENT;
+}
-#ifndef set_pud
-# define set_pud(pudp, pud) native_set_pud(pudp, pud)
-#endif
+static inline int pmd_none(pmd_t pmd)
+{
+ /* Only check low word on 32-bit platforms, since it might be
+ out of sync with upper half. */
+ return (unsigned long)native_pmd_val(pmd) == 0;
+}
-#ifndef __PAGETABLE_PMD_FOLDED
-#define pud_clear(pud) native_pud_clear(pud)
-#endif
+static inline unsigned long pmd_page_vaddr(pmd_t pmd)
+{
+ return (unsigned long)__va(pmd_val(pmd) & PTE_PFN_MASK);
+}
-#define pte_clear(mm, addr, ptep) native_pte_clear(mm, addr, ptep)
-#define pmd_clear(pmd) native_pmd_clear(pmd)
+/*
+ * Currently stuck as a macro due to indirect forward reference to
+ * linux/mmzone.h's __section_mem_map_addr() definition:
+ */
+#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
-#define pte_update(mm, addr, ptep) do { } while (0)
-#define pte_update_defer(mm, addr, ptep) do { } while (0)
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+static inline unsigned pmd_index(unsigned long address)
+{
+ return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
+}
-static inline void __init paravirt_pagetable_setup_start(pgd_t *base)
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * (Currently stuck as a macro because of indirect forward reference
+ * to linux/mm.h:page_to_nid())
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this function returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+static inline unsigned pte_index(unsigned long address)
{
- native_pagetable_setup_start(base);
+ return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
}
-static inline void __init paravirt_pagetable_setup_done(pgd_t *base)
+static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address)
{
- native_pagetable_setup_done(base);
+ return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address);
}
-#endif /* CONFIG_PARAVIRT */
-#endif /* __ASSEMBLY__ */
+static inline int pmd_bad(pmd_t pmd)
+{
+ return (pmd_flags(pmd) & ~_PAGE_USER) != _KERNPG_TABLE;
+}
-#ifdef CONFIG_X86_32
-# include "pgtable_32.h"
+static inline unsigned long pages_to_mb(unsigned long npg)
+{
+ return npg >> (20 - PAGE_SHIFT);
+}
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#if PAGETABLE_LEVELS > 2
+static inline int pud_none(pud_t pud)
+{
+ return native_pud_val(pud) == 0;
+}
+
+static inline int pud_present(pud_t pud)
+{
+ return pud_flags(pud) & _PAGE_PRESENT;
+}
+
+static inline unsigned long pud_page_vaddr(pud_t pud)
+{
+ return (unsigned long)__va((unsigned long)pud_val(pud) & PTE_PFN_MASK);
+}
+
+/*
+ * Currently stuck as a macro due to indirect forward reference to
+ * linux/mmzone.h's __section_mem_map_addr() definition:
+ */
+#define pud_page(pud) pfn_to_page(pud_val(pud) >> PAGE_SHIFT)
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
+{
+ return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
+}
+
+static inline unsigned long pmd_pfn(pmd_t pmd)
+{
+ return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
+static inline int pud_large(pud_t pud)
+{
+ return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+ (_PAGE_PSE | _PAGE_PRESENT);
+}
+
+static inline int pud_bad(pud_t pud)
+{
+ return (pud_flags(pud) & ~(_KERNPG_TABLE | _PAGE_USER)) != 0;
+}
#else
-# include "pgtable_64.h"
-#endif
+static inline int pud_large(pud_t pud)
+{
+ return 0;
+}
+#endif /* PAGETABLE_LEVELS > 2 */
+
+#if PAGETABLE_LEVELS > 3
+static inline int pgd_present(pgd_t pgd)
+{
+ return pgd_flags(pgd) & _PAGE_PRESENT;
+}
+
+static inline unsigned long pgd_page_vaddr(pgd_t pgd)
+{
+ return (unsigned long)__va((unsigned long)pgd_val(pgd) & PTE_PFN_MASK);
+}
+
+/*
+ * Currently stuck as a macro due to indirect forward reference to
+ * linux/mmzone.h's __section_mem_map_addr() definition:
+ */
+#define pgd_page(pgd) pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT)
+
+/* to find an entry in a page-table-directory. */
+static inline unsigned pud_index(unsigned long address)
+{
+ return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
+}
+
+static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
+{
+ return (pud_t *)pgd_page_vaddr(*pgd) + pud_index(address);
+}
+
+static inline int pgd_bad(pgd_t pgd)
+{
+ return (pgd_flags(pgd) & ~_PAGE_USER) != _KERNPG_TABLE;
+}
+
+static inline int pgd_none(pgd_t pgd)
+{
+ return !native_pgd_val(pgd);
+}
+#endif /* PAGETABLE_LEVELS > 3 */
+
+#endif /* __ASSEMBLY__ */
/*
* the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
#ifndef __ASSEMBLY__
-enum {
- PG_LEVEL_NONE,
- PG_LEVEL_4K,
- PG_LEVEL_2M,
- PG_LEVEL_1G,
- PG_LEVEL_NUM
-};
-
-#ifdef CONFIG_PROC_FS
-extern void update_page_count(int level, unsigned long pages);
-#else
-static inline void update_page_count(int level, unsigned long pages) { }
-#endif
-
-/*
- * Helper function that returns the kernel pagetable entry controlling
- * the virtual address 'address'. NULL means no pagetable entry present.
- * NOTE: the return type is pte_t but if the pmd is PSE then we return it
- * as a pte too.
- */
-extern pte_t *lookup_address(unsigned long address, unsigned int *level);
-
/* local pte updates need not use xchg for locking */
static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
{
#ifndef _ASM_X86_PGTABLE_32_H
#define _ASM_X86_PGTABLE_32_H
+#include <asm/pgtable_32_types.h>
/*
* The Linux memory management assumes a three-level page table setup. On
extern void set_pmd_pfn(unsigned long, unsigned long, pgprot_t);
-/*
- * The Linux x86 paging architecture is 'compile-time dual-mode', it
- * implements both the traditional 2-level x86 page tables and the
- * newer 3-level PAE-mode page tables.
- */
-#ifdef CONFIG_X86_PAE
-# include <asm/pgtable-3level-defs.h>
-# define PMD_SIZE (1UL << PMD_SHIFT)
-# define PMD_MASK (~(PMD_SIZE - 1))
-#else
-# include <asm/pgtable-2level-defs.h>
-#endif
-
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE - 1))
-
-/* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_OFFSET (8 * 1024 * 1024)
-#define VMALLOC_START ((unsigned long)high_memory + VMALLOC_OFFSET)
-#ifdef CONFIG_X86_PAE
-#define LAST_PKMAP 512
-#else
-#define LAST_PKMAP 1024
-#endif
-
-#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE * (LAST_PKMAP + 1)) \
- & PMD_MASK)
-
-#ifdef CONFIG_HIGHMEM
-# define VMALLOC_END (PKMAP_BASE - 2 * PAGE_SIZE)
-#else
-# define VMALLOC_END (FIXADDR_START - 2 * PAGE_SIZE)
-#endif
-
-#define MAXMEM (VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
/*
* Define this if things work differently on an i386 and an i486:
/* The boot page tables (all created as a single array) */
extern unsigned long pg0[];
-#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
-#define pmd_none(x) (!(unsigned long)pmd_val((x)))
-#define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (PTE_FLAGS_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
-
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-
#ifdef CONFIG_X86_PAE
# include <asm/pgtable-3level.h>
#else
# include <asm/pgtable-2level.h>
#endif
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-
-static inline int pud_large(pud_t pud) { return 0; }
-
-/*
- * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
- *
- * this macro returns the index of the entry in the pmd page which would
- * control the given virtual address
- */
-#define pmd_index(address) \
- (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-
-/*
- * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
- *
- * this macro returns the index of the entry in the pte page which would
- * control the given virtual address
- */
-#define pte_index(address) \
- (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) \
- ((pte_t *)pmd_page_vaddr(*(dir)) + pte_index((address)))
-
-#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-
-#define pmd_page_vaddr(pmd) \
- ((unsigned long)__va(pmd_val((pmd)) & PTE_PFN_MASK))
-
#if defined(CONFIG_HIGHPTE)
#define pte_offset_map(dir, address) \
((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) + \
#define kern_addr_valid(kaddr) (0)
#endif
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
#endif /* _ASM_X86_PGTABLE_32_H */
--- /dev/null
+#ifndef _ASM_X86_PGTABLE_32_DEFS_H
+#define _ASM_X86_PGTABLE_32_DEFS_H
+
+/*
+ * The Linux x86 paging architecture is 'compile-time dual-mode', it
+ * implements both the traditional 2-level x86 page tables and the
+ * newer 3-level PAE-mode page tables.
+ */
+#ifdef CONFIG_X86_PAE
+# include <asm/pgtable-3level_types.h>
+# define PMD_SIZE (1UL << PMD_SHIFT)
+# define PMD_MASK (~(PMD_SIZE - 1))
+#else
+# include <asm/pgtable-2level_types.h>
+#endif
+
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE - 1))
+
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET (8 * 1024 * 1024)
+#define VMALLOC_START ((unsigned long)high_memory + VMALLOC_OFFSET)
+#ifdef CONFIG_X86_PAE
+#define LAST_PKMAP 512
+#else
+#define LAST_PKMAP 1024
+#endif
+
+#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE * (LAST_PKMAP + 1)) \
+ & PMD_MASK)
+
+#ifdef CONFIG_HIGHMEM
+# define VMALLOC_END (PKMAP_BASE - 2 * PAGE_SIZE)
+#else
+# define VMALLOC_END (FIXADDR_START - 2 * PAGE_SIZE)
+#endif
+
+#define MAXMEM (VMALLOC_END - PAGE_OFFSET - __VMALLOC_RESERVE)
+
+#endif /* _ASM_X86_PGTABLE_32_DEFS_H */
#define _ASM_X86_PGTABLE_64_H
#include <linux/const.h>
+#include <asm/pgtable_64_types.h>
+
#ifndef __ASSEMBLY__
/*
#endif /* !__ASSEMBLY__ */
-#define SHARED_KERNEL_PMD 0
-
-/*
- * PGDIR_SHIFT determines what a top-level page table entry can map
- */
-#define PGDIR_SHIFT 39
-#define PTRS_PER_PGD 512
-
-/*
- * 3rd level page
- */
-#define PUD_SHIFT 30
-#define PTRS_PER_PUD 512
-
-/*
- * PMD_SHIFT determines the size of the area a middle-level
- * page table can map
- */
-#define PMD_SHIFT 21
-#define PTRS_PER_PMD 512
-
-/*
- * entries per page directory level
- */
-#define PTRS_PER_PTE 512
-
#ifndef __ASSEMBLY__
#define pte_ERROR(e) \
printk("%s:%d: bad pgd %p(%016lx).\n", \
__FILE__, __LINE__, &(e), pgd_val(e))
-#define pgd_none(x) (!pgd_val(x))
-#define pud_none(x) (!pud_val(x))
-
struct mm_struct;
void set_pte_vaddr_pud(pud_t *pud_page, unsigned long vaddr, pte_t new_pte);
native_set_pgd(pgd, native_make_pgd(0));
}
-#define pte_same(a, b) ((a).pte == (b).pte)
-
-#endif /* !__ASSEMBLY__ */
-
-#define PMD_SIZE (_AC(1, UL) << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE - 1))
-#define PUD_SIZE (_AC(1, UL) << PUD_SHIFT)
-#define PUD_MASK (~(PUD_SIZE - 1))
-#define PGDIR_SIZE (_AC(1, UL) << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE - 1))
-
-
-#define MAXMEM _AC(__AC(1, UL) << MAX_PHYSMEM_BITS, UL)
-#define VMALLOC_START _AC(0xffffc20000000000, UL)
-#define VMALLOC_END _AC(0xffffe1ffffffffff, UL)
-#define VMEMMAP_START _AC(0xffffe20000000000, UL)
-#define MODULES_VADDR _AC(0xffffffffa0000000, UL)
-#define MODULES_END _AC(0xffffffffff000000, UL)
-#define MODULES_LEN (MODULES_END - MODULES_VADDR)
-
-#ifndef __ASSEMBLY__
-
-static inline int pgd_bad(pgd_t pgd)
-{
- return (pgd_val(pgd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
-static inline int pud_bad(pud_t pud)
-{
- return (pud_val(pud) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
-static inline int pmd_bad(pmd_t pmd)
-{
- return (pmd_val(pmd) & ~(PTE_PFN_MASK | _PAGE_USER)) != _KERNPG_TABLE;
-}
-
-#define pte_none(x) (!pte_val((x)))
-#define pte_present(x) (pte_val((x)) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-
-#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) /* FIXME: is this right? */
-
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
/*
* Level 4 access.
*/
-#define pgd_page_vaddr(pgd) \
- ((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_PFN_MASK))
-#define pgd_page(pgd) (pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
-#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
static inline int pgd_large(pgd_t pgd) { return 0; }
#define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
/* PUD - Level3 access */
-/* to find an entry in a page-table-directory. */
-#define pud_page_vaddr(pud) \
- ((unsigned long)__va(pud_val((pud)) & PHYSICAL_PAGE_MASK))
-#define pud_page(pud) (pfn_to_page(pud_val((pud)) >> PAGE_SHIFT))
-#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
-#define pud_offset(pgd, address) \
- ((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
-#define pud_present(pud) (pud_val((pud)) & _PAGE_PRESENT)
-
-static inline int pud_large(pud_t pte)
-{
- return (pud_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
- (_PAGE_PSE | _PAGE_PRESENT);
-}
/* PMD - Level 2 access */
-#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_PFN_MASK))
-#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-
-#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-#define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
- pmd_index(address))
-#define pmd_none(x) (!pmd_val((x)))
-#define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT)
-#define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
-#define pmd_pfn(x) ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
-
#define pte_to_pgoff(pte) ((pte_val((pte)) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
#define pgoff_to_pte(off) ((pte_t) { .pte = ((off) << PAGE_SHIFT) | \
_PAGE_FILE })
/* PTE - Level 1 access. */
-/* page, protection -> pte */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn((page)), (pgprot))
-
-#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
- pte_index((address)))
-
/* x86-64 always has all page tables mapped. */
#define pte_offset_map(dir, address) pte_offset_kernel((dir), (address))
#define pte_offset_map_nested(dir, address) pte_offset_kernel((dir), (address))
extern int kern_addr_valid(unsigned long addr);
extern void cleanup_highmap(void);
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
#define HAVE_ARCH_UNMAPPED_AREA
#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
--- /dev/null
+#ifndef _ASM_X86_PGTABLE_64_DEFS_H
+#define _ASM_X86_PGTABLE_64_DEFS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef unsigned long pteval_t;
+typedef unsigned long pmdval_t;
+typedef unsigned long pudval_t;
+typedef unsigned long pgdval_t;
+typedef unsigned long pgprotval_t;
+
+typedef struct { pteval_t pte; } pte_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#define SHARED_KERNEL_PMD 0
+
+/*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
+#define PGDIR_SHIFT 39
+#define PTRS_PER_PGD 512
+
+/*
+ * 3rd level page
+ */
+#define PUD_SHIFT 30
+#define PTRS_PER_PUD 512
+
+/*
+ * PMD_SHIFT determines the size of the area a middle-level
+ * page table can map
+ */
+#define PMD_SHIFT 21
+#define PTRS_PER_PMD 512
+
+/*
+ * entries per page directory level
+ */
+#define PTRS_PER_PTE 512
+
+#define PMD_SIZE (_AC(1, UL) << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE - 1))
+#define PUD_SIZE (_AC(1, UL) << PUD_SHIFT)
+#define PUD_MASK (~(PUD_SIZE - 1))
+#define PGDIR_SIZE (_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE - 1))
+
+
+#define MAXMEM _AC(__AC(1, UL) << MAX_PHYSMEM_BITS, UL)
+#define VMALLOC_START _AC(0xffffc20000000000, UL)
+#define VMALLOC_END _AC(0xffffe1ffffffffff, UL)
+#define VMEMMAP_START _AC(0xffffe20000000000, UL)
+#define MODULES_VADDR _AC(0xffffffffa0000000, UL)
+#define MODULES_END _AC(0xffffffffff000000, UL)
+#define MODULES_LEN (MODULES_END - MODULES_VADDR)
+
+#endif /* _ASM_X86_PGTABLE_64_DEFS_H */
--- /dev/null
+#ifndef _ASM_X86_PGTABLE_DEFS_H
+#define _ASM_X86_PGTABLE_DEFS_H
+
+#include <linux/const.h>
+#include <asm/page_types.h>
+
+#define FIRST_USER_ADDRESS 0
+
+#define _PAGE_BIT_PRESENT 0 /* is present */
+#define _PAGE_BIT_RW 1 /* writeable */
+#define _PAGE_BIT_USER 2 /* userspace addressable */
+#define _PAGE_BIT_PWT 3 /* page write through */
+#define _PAGE_BIT_PCD 4 /* page cache disabled */
+#define _PAGE_BIT_ACCESSED 5 /* was accessed (raised by CPU) */
+#define _PAGE_BIT_DIRTY 6 /* was written to (raised by CPU) */
+#define _PAGE_BIT_PSE 7 /* 4 MB (or 2MB) page */
+#define _PAGE_BIT_PAT 7 /* on 4KB pages */
+#define _PAGE_BIT_GLOBAL 8 /* Global TLB entry PPro+ */
+#define _PAGE_BIT_UNUSED1 9 /* available for programmer */
+#define _PAGE_BIT_IOMAP 10 /* flag used to indicate IO mapping */
+#define _PAGE_BIT_UNUSED3 11
+#define _PAGE_BIT_PAT_LARGE 12 /* On 2MB or 1GB pages */
+#define _PAGE_BIT_SPECIAL _PAGE_BIT_UNUSED1
+#define _PAGE_BIT_CPA_TEST _PAGE_BIT_UNUSED1
+#define _PAGE_BIT_NX 63 /* No execute: only valid after cpuid check */
+
+/* If _PAGE_BIT_PRESENT is clear, we use these: */
+/* - if the user mapped it with PROT_NONE; pte_present gives true */
+#define _PAGE_BIT_PROTNONE _PAGE_BIT_GLOBAL
+/* - set: nonlinear file mapping, saved PTE; unset:swap */
+#define _PAGE_BIT_FILE _PAGE_BIT_DIRTY
+
+#define _PAGE_PRESENT (_AT(pteval_t, 1) << _PAGE_BIT_PRESENT)
+#define _PAGE_RW (_AT(pteval_t, 1) << _PAGE_BIT_RW)
+#define _PAGE_USER (_AT(pteval_t, 1) << _PAGE_BIT_USER)
+#define _PAGE_PWT (_AT(pteval_t, 1) << _PAGE_BIT_PWT)
+#define _PAGE_PCD (_AT(pteval_t, 1) << _PAGE_BIT_PCD)
+#define _PAGE_ACCESSED (_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED)
+#define _PAGE_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_DIRTY)
+#define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE)
+#define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)
+#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1)
+#define _PAGE_IOMAP (_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)
+#define _PAGE_UNUSED3 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3)
+#define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT)
+#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
+#define _PAGE_SPECIAL (_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
+#define _PAGE_CPA_TEST (_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
+#define __HAVE_ARCH_PTE_SPECIAL
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+#define _PAGE_NX (_AT(pteval_t, 1) << _PAGE_BIT_NX)
+#else
+#define _PAGE_NX (_AT(pteval_t, 0))
+#endif
+
+#define _PAGE_FILE (_AT(pteval_t, 1) << _PAGE_BIT_FILE)
+#define _PAGE_PROTNONE (_AT(pteval_t, 1) << _PAGE_BIT_PROTNONE)
+
+#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \
+ _PAGE_DIRTY)
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK (PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT | \
+ _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define _PAGE_CACHE_MASK (_PAGE_PCD | _PAGE_PWT)
+#define _PAGE_CACHE_WB (0)
+#define _PAGE_CACHE_WC (_PAGE_PWT)
+#define _PAGE_CACHE_UC_MINUS (_PAGE_PCD)
+#define _PAGE_CACHE_UC (_PAGE_PCD | _PAGE_PWT)
+
+#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_NX)
+
+#define PAGE_SHARED_EXEC __pgprot(_PAGE_PRESENT | _PAGE_RW | \
+ _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY_NOEXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_ACCESSED)
+#define PAGE_COPY PAGE_COPY_NOEXEC
+#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_ACCESSED)
+
+#define __PAGE_KERNEL_EXEC \
+ (_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+#define __PAGE_KERNEL (__PAGE_KERNEL_EXEC | _PAGE_NX)
+
+#define __PAGE_KERNEL_RO (__PAGE_KERNEL & ~_PAGE_RW)
+#define __PAGE_KERNEL_RX (__PAGE_KERNEL_EXEC & ~_PAGE_RW)
+#define __PAGE_KERNEL_EXEC_NOCACHE (__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_WC (__PAGE_KERNEL | _PAGE_CACHE_WC)
+#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_UC_MINUS (__PAGE_KERNEL | _PAGE_PCD)
+#define __PAGE_KERNEL_VSYSCALL (__PAGE_KERNEL_RX | _PAGE_USER)
+#define __PAGE_KERNEL_VSYSCALL_NOCACHE (__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_NOCACHE (__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define __PAGE_KERNEL_IO (__PAGE_KERNEL | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_NOCACHE (__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_UC_MINUS (__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP)
+#define __PAGE_KERNEL_IO_WC (__PAGE_KERNEL_WC | _PAGE_IOMAP)
+
+#define PAGE_KERNEL __pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_RX __pgprot(__PAGE_KERNEL_RX)
+#define PAGE_KERNEL_WC __pgprot(__PAGE_KERNEL_WC)
+#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_UC_MINUS __pgprot(__PAGE_KERNEL_UC_MINUS)
+#define PAGE_KERNEL_EXEC_NOCACHE __pgprot(__PAGE_KERNEL_EXEC_NOCACHE)
+#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_NOCACHE __pgprot(__PAGE_KERNEL_LARGE_NOCACHE)
+#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
+#define PAGE_KERNEL_VSYSCALL __pgprot(__PAGE_KERNEL_VSYSCALL)
+#define PAGE_KERNEL_VSYSCALL_NOCACHE __pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE)
+
+#define PAGE_KERNEL_IO __pgprot(__PAGE_KERNEL_IO)
+#define PAGE_KERNEL_IO_NOCACHE __pgprot(__PAGE_KERNEL_IO_NOCACHE)
+#define PAGE_KERNEL_IO_UC_MINUS __pgprot(__PAGE_KERNEL_IO_UC_MINUS)
+#define PAGE_KERNEL_IO_WC __pgprot(__PAGE_KERNEL_IO_WC)
+
+/* xwr */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY
+#define __P100 PAGE_READONLY_EXEC
+#define __P101 PAGE_READONLY_EXEC
+#define __P110 PAGE_COPY_EXEC
+#define __P111 PAGE_COPY_EXEC
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED
+#define __S100 PAGE_READONLY_EXEC
+#define __S101 PAGE_READONLY_EXEC
+#define __S110 PAGE_SHARED_EXEC
+#define __S111 PAGE_SHARED_EXEC
+
+/*
+ * early identity mapping pte attrib macros.
+ */
+#ifdef CONFIG_X86_64
+#define __PAGE_KERNEL_IDENT_LARGE_EXEC __PAGE_KERNEL_LARGE_EXEC
+#else
+/*
+ * For PDE_IDENT_ATTR include USER bit. As the PDE and PTE protection
+ * bits are combined, this will alow user to access the high address mapped
+ * VDSO in the presence of CONFIG_COMPAT_VDSO
+ */
+#define PTE_IDENT_ATTR 0x003 /* PRESENT+RW */
+#define PDE_IDENT_ATTR 0x067 /* PRESENT+RW+USER+DIRTY+ACCESSED */
+#define PGD_IDENT_ATTR 0x001 /* PRESENT (no other attributes) */
+#endif
+
+#ifdef CONFIG_X86_32
+# include "pgtable_32_types.h"
+#else
+# include "pgtable_64_types.h"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
+
+typedef struct { pgdval_t pgd; } pgd_t;
+
+static inline pgd_t native_make_pgd(pgdval_t val)
+{
+ return (pgd_t) { val };
+}
+
+static inline pgdval_t native_pgd_val(pgd_t pgd)
+{
+ return pgd.pgd;
+}
+
+static inline pgdval_t pgd_flags(pgd_t pgd)
+{
+ return native_pgd_val(pgd) & PTE_FLAGS_MASK;
+}
+
+#if PAGETABLE_LEVELS > 3
+typedef struct { pudval_t pud; } pud_t;
+
+static inline pud_t native_make_pud(pmdval_t val)
+{
+ return (pud_t) { val };
+}
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+ return pud.pud;
+}
+#else
+#include <asm-generic/pgtable-nopud.h>
+
+static inline pudval_t native_pud_val(pud_t pud)
+{
+ return native_pgd_val(pud.pgd);
+}
+#endif
+
+#if PAGETABLE_LEVELS > 2
+typedef struct { pmdval_t pmd; } pmd_t;
+
+static inline pmd_t native_make_pmd(pmdval_t val)
+{
+ return (pmd_t) { val };
+}
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+ return pmd.pmd;
+}
+#else
+#include <asm-generic/pgtable-nopmd.h>
+
+static inline pmdval_t native_pmd_val(pmd_t pmd)
+{
+ return native_pgd_val(pmd.pud.pgd);
+}
+#endif
+
+static inline pudval_t pud_flags(pud_t pud)
+{
+ return native_pud_val(pud) & PTE_FLAGS_MASK;
+}
+
+static inline pmdval_t pmd_flags(pmd_t pmd)
+{
+ return native_pmd_val(pmd) & PTE_FLAGS_MASK;
+}
+
+static inline pte_t native_make_pte(pteval_t val)
+{
+ return (pte_t) { .pte = val };
+}
+
+static inline pteval_t native_pte_val(pte_t pte)
+{
+ return pte.pte;
+}
+
+static inline pteval_t pte_flags(pte_t pte)
+{
+ return native_pte_val(pte) & PTE_FLAGS_MASK;
+}
+
+#define pgprot_val(x) ((x).pgprot)
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+
+typedef struct page *pgtable_t;
+
+extern pteval_t __supported_pte_mask;
+extern int nx_enabled;
+
+#define pgprot_writecombine pgprot_writecombine
+extern pgprot_t pgprot_writecombine(pgprot_t prot);
+
+/* Indicate that x86 has its own track and untrack pfn vma functions */
+#define __HAVE_PFNMAP_TRACKING
+
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot);
+int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t *vma_prot);
+
+/* Install a pte for a particular vaddr in kernel space. */
+void set_pte_vaddr(unsigned long vaddr, pte_t pte);
+
+#ifdef CONFIG_X86_32
+extern void native_pagetable_setup_start(pgd_t *base);
+extern void native_pagetable_setup_done(pgd_t *base);
+#else
+static inline void native_pagetable_setup_start(pgd_t *base) {}
+static inline void native_pagetable_setup_done(pgd_t *base) {}
+#endif
+
+struct seq_file;
+extern void arch_report_meminfo(struct seq_file *m);
+
+enum {
+ PG_LEVEL_NONE,
+ PG_LEVEL_4K,
+ PG_LEVEL_2M,
+ PG_LEVEL_1G,
+ PG_LEVEL_NUM
+};
+
+#ifdef CONFIG_PROC_FS
+extern void update_page_count(int level, unsigned long pages);
+#else
+static inline void update_page_count(int level, unsigned long pages) { }
+#endif
+
+/*
+ * Helper function that returns the kernel pagetable entry controlling
+ * the virtual address 'address'. NULL means no pagetable entry present.
+ * NOTE: the return type is pte_t but if the pmd is PSE then we return it
+ * as a pte too.
+ */
+extern pte_t *lookup_address(unsigned long address, unsigned int *level);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_X86_PGTABLE_DEFS_H */
#include <asm/cpufeature.h>
#include <asm/system.h>
#include <asm/page.h>
+#include <asm/pgtable_types.h>
#include <asm/percpu.h>
#include <asm/msr.h>
#include <asm/desc_defs.h>
};
DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
+DECLARE_INIT_PER_CPU(irq_stack_union);
+
DECLARE_PER_CPU(char *, irq_stack_ptr);
+#else /* X86_64 */
+#ifdef CONFIG_CC_STACKPROTECTOR
+DECLARE_PER_CPU(unsigned long, stack_canary);
#endif
+#endif /* X86_64 */
extern void print_cpu_info(struct cpuinfo_x86 *);
extern unsigned int xstate_size;
int xds;
int xes;
int xfs;
- /* int gs; */
+ int xgs;
long orig_eax;
long eip;
int xcs;
unsigned long ds;
unsigned long es;
unsigned long fs;
- /* int gs; */
+ unsigned long gs;
unsigned long orig_ax;
unsigned long ip;
unsigned long cs;
*
* 26 - ESPFIX small SS
* 27 - per-cpu [ offset to per-cpu data area ]
- * 28 - unused
+ * 28 - stack_canary-20 [ for stack protector ]
* 29 - unused
* 30 - unused
* 31 - TSS for double fault handler
#define __KERNEL_PERCPU 0
#endif
+#define GDT_ENTRY_STACK_CANARY (GDT_ENTRY_KERNEL_BASE + 16)
+#ifdef CONFIG_CC_STACKPROTECTOR
+#define __KERNEL_STACK_CANARY (GDT_ENTRY_STACK_CANARY * 8)
+#else
+#define __KERNEL_STACK_CANARY 0
+#endif
+
#define GDT_ENTRY_DOUBLEFAULT_TSS 31
/*
#ifndef __ASSEMBLY__
-/* Interrupt control for vSMPowered x86_64 systems */
-void vsmp_init(void);
-
-void setup_bios_corruption_check(void);
-
-#ifdef CONFIG_X86_VISWS
-extern void visws_early_detect(void);
-extern int is_visws_box(void);
-#else
-static inline void visws_early_detect(void) { }
-static inline int is_visws_box(void) { return 0; }
-#endif
-
-extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
-extern int wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip);
/*
* Any setup quirks to be performed?
*/
int (*update_genapic)(void);
};
-extern struct x86_quirks *x86_quirks;
-extern unsigned long saved_video_mode;
-
-#ifndef CONFIG_PARAVIRT
-#define paravirt_post_allocator_init() do {} while (0)
-#endif
#endif /* __ASSEMBLY__ */
#ifdef __i386__
#ifndef __ASSEMBLY__
#include <asm/bootparam.h>
+/* Interrupt control for vSMPowered x86_64 systems */
+void vsmp_init(void);
+
+void setup_bios_corruption_check(void);
+
+#ifdef CONFIG_X86_VISWS
+extern void visws_early_detect(void);
+extern int is_visws_box(void);
+#else
+static inline void visws_early_detect(void) { }
+static inline int is_visws_box(void) { return 0; }
+#endif
+
+extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip);
+extern int wakeup_secondary_cpu_via_init(int apicid, unsigned long start_eip);
+extern struct x86_quirks *x86_quirks;
+extern unsigned long saved_video_mode;
+
+#ifndef CONFIG_PARAVIRT
+#define paravirt_post_allocator_init() do {} while (0)
+#endif
+
#ifndef _SETUP
/*
+/*
+ * GCC stack protector support.
+ *
+ * Stack protector works by putting predefined pattern at the start of
+ * the stack frame and verifying that it hasn't been overwritten when
+ * returning from the function. The pattern is called stack canary
+ * and unfortunately gcc requires it to be at a fixed offset from %gs.
+ * On x86_64, the offset is 40 bytes and on x86_32 20 bytes. x86_64
+ * and x86_32 use segment registers differently and thus handles this
+ * requirement differently.
+ *
+ * On x86_64, %gs is shared by percpu area and stack canary. All
+ * percpu symbols are zero based and %gs points to the base of percpu
+ * area. The first occupant of the percpu area is always
+ * irq_stack_union which contains stack_canary at offset 40. Userland
+ * %gs is always saved and restored on kernel entry and exit using
+ * swapgs, so stack protector doesn't add any complexity there.
+ *
+ * On x86_32, it's slightly more complicated. As in x86_64, %gs is
+ * used for userland TLS. Unfortunately, some processors are much
+ * slower at loading segment registers with different value when
+ * entering and leaving the kernel, so the kernel uses %fs for percpu
+ * area and manages %gs lazily so that %gs is switched only when
+ * necessary, usually during task switch.
+ *
+ * As gcc requires the stack canary at %gs:20, %gs can't be managed
+ * lazily if stack protector is enabled, so the kernel saves and
+ * restores userland %gs on kernel entry and exit. This behavior is
+ * controlled by CONFIG_X86_32_LAZY_GS and accessors are defined in
+ * system.h to hide the details.
+ */
+
#ifndef _ASM_STACKPROTECTOR_H
#define _ASM_STACKPROTECTOR_H 1
+#ifdef CONFIG_CC_STACKPROTECTOR
+
#include <asm/tsc.h>
#include <asm/processor.h>
+#include <asm/percpu.h>
+#include <asm/system.h>
+#include <asm/desc.h>
+#include <linux/random.h>
+
+/*
+ * 24 byte read-only segment initializer for stack canary. Linker
+ * can't handle the address bit shifting. Address will be set in
+ * head_32 for boot CPU and setup_per_cpu_areas() for others.
+ */
+#define GDT_STACK_CANARY_INIT \
+ [GDT_ENTRY_STACK_CANARY] = { { { 0x00000018, 0x00409000 } } },
/*
* Initialize the stackprotector canary value.
u64 canary;
u64 tsc;
- /*
- * Build time only check to make sure the stack_canary is at
- * offset 40 in the pda; this is a gcc ABI requirement
- */
+#ifdef CONFIG_X86_64
BUILD_BUG_ON(offsetof(union irq_stack_union, stack_canary) != 40);
-
+#endif
/*
* We both use the random pool and the current TSC as a source
* of randomness. The TSC only matters for very early init,
canary += tsc + (tsc << 32UL);
current->stack_canary = canary;
+#ifdef CONFIG_X86_64
percpu_write(irq_stack_union.stack_canary, canary);
+#else
+ percpu_write(stack_canary, canary);
+#endif
}
+static inline void setup_stack_canary_segment(int cpu)
+{
+#ifdef CONFIG_X86_32
+ unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu) - 20;
+ struct desc_struct *gdt_table = get_cpu_gdt_table(cpu);
+ struct desc_struct desc;
+
+ desc = gdt_table[GDT_ENTRY_STACK_CANARY];
+ desc.base0 = canary & 0xffff;
+ desc.base1 = (canary >> 16) & 0xff;
+ desc.base2 = (canary >> 24) & 0xff;
+ write_gdt_entry(gdt_table, GDT_ENTRY_STACK_CANARY, &desc, DESCTYPE_S);
+#endif
+}
+
+static inline void load_stack_canary_segment(void)
+{
+#ifdef CONFIG_X86_32
+ asm("mov %0, %%gs" : : "r" (__KERNEL_STACK_CANARY) : "memory");
+#endif
+}
+
+#else /* CC_STACKPROTECTOR */
+
+#define GDT_STACK_CANARY_INIT
+
+/* dummy boot_init_stack_canary() is defined in linux/stackprotector.h */
+
+static inline void setup_stack_canary_segment(int cpu)
+{ }
+
+static inline void load_stack_canary_segment(void)
+{
+#ifdef CONFIG_X86_32
+ asm volatile ("mov %0, %%gs" : : "r" (0));
#endif
+}
+
+#endif /* CC_STACKPROTECTOR */
+#endif /* _ASM_STACKPROTECTOR_H */
/* X86_32 only */
#ifdef CONFIG_X86_32
/* kernel/process_32.c */
-asmlinkage int sys_fork(struct pt_regs);
-asmlinkage int sys_clone(struct pt_regs);
-asmlinkage int sys_vfork(struct pt_regs);
-asmlinkage int sys_execve(struct pt_regs);
+int sys_fork(struct pt_regs *);
+int sys_clone(struct pt_regs *);
+int sys_vfork(struct pt_regs *);
+int sys_execve(struct pt_regs *);
/* kernel/signal_32.c */
asmlinkage int sys_sigsuspend(int, int, old_sigset_t);
asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
struct old_sigaction __user *);
-asmlinkage int sys_sigaltstack(unsigned long);
-asmlinkage unsigned long sys_sigreturn(unsigned long);
-asmlinkage int sys_rt_sigreturn(unsigned long);
+int sys_sigaltstack(struct pt_regs *);
+unsigned long sys_sigreturn(struct pt_regs *);
+long sys_rt_sigreturn(struct pt_regs *);
/* kernel/ioport.c */
-asmlinkage long sys_iopl(unsigned long);
+long sys_iopl(struct pt_regs *);
/* kernel/sys_i386_32.c */
asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
asmlinkage int sys_olduname(struct oldold_utsname __user *);
/* kernel/vm86_32.c */
-asmlinkage int sys_vm86old(struct pt_regs);
-asmlinkage int sys_vm86(struct pt_regs);
+int sys_vm86old(struct pt_regs *);
+int sys_vm86(struct pt_regs *);
#else /* CONFIG_X86_32 */
asmlinkage long sys_execve(char __user *, char __user * __user *,
char __user * __user *,
struct pt_regs *);
+long sys_arch_prctl(int, unsigned long);
/* kernel/ioport.c */
asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
#ifdef CONFIG_X86_32
+#ifdef CONFIG_CC_STACKPROTECTOR
+#define __switch_canary \
+ "movl %P[task_canary](%[next]), %%ebx\n\t" \
+ "movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
+#define __switch_canary_oparam \
+ , [stack_canary] "=m" (per_cpu_var(stack_canary))
+#define __switch_canary_iparam \
+ , [task_canary] "i" (offsetof(struct task_struct, stack_canary))
+#else /* CC_STACKPROTECTOR */
+#define __switch_canary
+#define __switch_canary_oparam
+#define __switch_canary_iparam
+#endif /* CC_STACKPROTECTOR */
+
/*
* Saving eflags is important. It switches not only IOPL between tasks,
* it also protects other tasks from NT leaking through sysenter etc.
"movl %[next_sp],%%esp\n\t" /* restore ESP */ \
"movl $1f,%[prev_ip]\n\t" /* save EIP */ \
"pushl %[next_ip]\n\t" /* restore EIP */ \
+ __switch_canary \
"jmp __switch_to\n" /* regparm call */ \
"1:\t" \
"popl %%ebp\n\t" /* restore EBP */ \
"=b" (ebx), "=c" (ecx), "=d" (edx), \
"=S" (esi), "=D" (edi) \
\
+ __switch_canary_oparam \
+ \
/* input parameters: */ \
: [next_sp] "m" (next->thread.sp), \
[next_ip] "m" (next->thread.ip), \
[prev] "a" (prev), \
[next] "d" (next) \
\
+ __switch_canary_iparam \
+ \
: /* reloaded segment registers */ \
"memory"); \
} while (0)
#define savesegment(seg, value) \
asm("mov %%" #seg ",%0":"=r" (value) : : "memory")
+/*
+ * x86_32 user gs accessors.
+ */
+#ifdef CONFIG_X86_32
+#ifdef CONFIG_X86_32_LAZY_GS
+#define get_user_gs(regs) (u16)({unsigned long v; savesegment(gs, v); v;})
+#define set_user_gs(regs, v) loadsegment(gs, (unsigned long)(v))
+#define task_user_gs(tsk) ((tsk)->thread.gs)
+#define lazy_save_gs(v) savesegment(gs, (v))
+#define lazy_load_gs(v) loadsegment(gs, (v))
+#else /* X86_32_LAZY_GS */
+#define get_user_gs(regs) (u16)((regs)->gs)
+#define set_user_gs(regs, v) do { (regs)->gs = (v); } while (0)
+#define task_user_gs(tsk) (task_pt_regs(tsk)->gs)
+#define lazy_save_gs(v) do { } while (0)
+#define lazy_load_gs(v) do { } while (0)
+#endif /* X86_32_LAZY_GS */
+#endif /* X86_32 */
+
static inline unsigned long get_limit(unsigned long segment)
{
unsigned long __limit;
dotraplinkage void do_overflow(struct pt_regs *, long);
dotraplinkage void do_bounds(struct pt_regs *, long);
dotraplinkage void do_invalid_op(struct pt_regs *, long);
-dotraplinkage void do_device_not_available(struct pt_regs);
+dotraplinkage void do_device_not_available(struct pt_regs *, long);
dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *, long);
dotraplinkage void do_invalid_TSS(struct pt_regs *, long);
dotraplinkage void do_segment_not_present(struct pt_regs *, long);
#ifdef CONFIG_X86_32
-#define __put_user_asm_u64(x, addr, err) \
+#define __put_user_asm_u64(x, addr, err, errret) \
asm volatile("1: movl %%eax,0(%2)\n" \
"2: movl %%edx,4(%2)\n" \
"3:\n" \
_ASM_EXTABLE(1b, 4b) \
_ASM_EXTABLE(2b, 4b) \
: "=r" (err) \
- : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
+ : "A" (x), "r" (addr), "i" (errret), "0" (err))
#define __put_user_asm_ex_u64(x, addr) \
asm volatile("1: movl %%eax,0(%1)\n" \
asm volatile("call __put_user_8" : "=a" (__ret_pu) \
: "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
#else
-#define __put_user_asm_u64(x, ptr, retval) \
- __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
+#define __put_user_asm_u64(x, ptr, retval, errret) \
+ __put_user_asm(x, ptr, retval, "q", "", "Zr", errret)
#define __put_user_asm_ex_u64(x, addr) \
__put_user_asm_ex(x, addr, "q", "", "Zr")
#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
__put_user_asm(x, ptr, retval, "l", "k", "ir", errret); \
break; \
case 8: \
- __put_user_asm_u64((__typeof__(*ptr))(x), ptr, retval); \
+ __put_user_asm_u64((__typeof__(*ptr))(x), ptr, retval, \
+ errret); \
break; \
default: \
__put_user_bad(); \
*/
#define get_user_try uaccess_try
#define get_user_catch(err) uaccess_catch(err)
-#define put_user_try uaccess_try
-#define put_user_catch(err) uaccess_catch(err)
#define get_user_ex(x, ptr) do { \
unsigned long __gue_val; \
(x) = (__force __typeof__(*(ptr)))__gue_val; \
} while (0)
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+#define put_user_try uaccess_try
+#define put_user_catch(err) uaccess_catch(err)
+
#define put_user_ex(x, ptr) \
__put_user_size_ex((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+#else /* !CONFIG_X86_WP_WORKS_OK */
+
+#define put_user_try do { \
+ int __uaccess_err = 0;
+
+#define put_user_catch(err) \
+ (err) |= __uaccess_err; \
+} while (0)
+
+#define put_user_ex(x, ptr) do { \
+ __uaccess_err |= __put_user(x, ptr); \
+} while (0)
+
+#endif /* CONFIG_X86_WP_WORKS_OK */
+
/*
* movsl can be slow when source and dest are not both 8-byte aligned
*/
enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
+struct cpumask;
+struct mm_struct;
+
#ifdef CONFIG_X86_UV
extern enum uv_system_type get_uv_system_type(void);
extern struct start_info *xen_start_info;
enum xen_domain_type {
- XEN_NATIVE,
- XEN_PV_DOMAIN,
- XEN_HVM_DOMAIN,
+ XEN_NATIVE, /* running on bare hardware */
+ XEN_PV_DOMAIN, /* running in a PV domain */
+ XEN_HVM_DOMAIN, /* running in a Xen hvm domain */
};
-extern enum xen_domain_type xen_domain_type;
-
#ifdef CONFIG_XEN
-#define xen_domain() (xen_domain_type != XEN_NATIVE)
+extern enum xen_domain_type xen_domain_type;
#else
-#define xen_domain() (0)
+#define xen_domain_type XEN_NATIVE
#endif
-#define xen_pv_domain() (xen_domain() && xen_domain_type == XEN_PV_DOMAIN)
-#define xen_hvm_domain() (xen_domain() && xen_domain_type == XEN_HVM_DOMAIN)
+#define xen_domain() (xen_domain_type != XEN_NATIVE)
+#define xen_pv_domain() (xen_domain() && \
+ xen_domain_type == XEN_PV_DOMAIN)
+#define xen_hvm_domain() (xen_domain() && \
+ xen_domain_type == XEN_HVM_DOMAIN)
+
+#ifdef CONFIG_XEN_DOM0
+#include <xen/interface/xen.h>
-#define xen_initial_domain() (xen_pv_domain() && xen_start_info->flags & SIF_INITDOMAIN)
+#define xen_initial_domain() (xen_pv_domain() && \
+ xen_start_info->flags & SIF_INITDOMAIN)
+#else /* !CONFIG_XEN_DOM0 */
+#define xen_initial_domain() (0)
+#endif /* CONFIG_XEN_DOM0 */
#endif /* _ASM_X86_XEN_HYPERVISOR_H */
*/
char *__init __acpi_map_table(unsigned long phys, unsigned long size)
{
- unsigned long base, offset, mapped_size;
- int idx;
if (!phys || !size)
return NULL;
- if (phys+size <= (max_low_pfn_mapped << PAGE_SHIFT))
- return __va(phys);
-
- offset = phys & (PAGE_SIZE - 1);
- mapped_size = PAGE_SIZE - offset;
- clear_fixmap(FIX_ACPI_END);
- set_fixmap(FIX_ACPI_END, phys);
- base = fix_to_virt(FIX_ACPI_END);
-
- /*
- * Most cases can be covered by the below.
- */
- idx = FIX_ACPI_END;
- while (mapped_size < size) {
- if (--idx < FIX_ACPI_BEGIN)
- return NULL; /* cannot handle this */
- phys += PAGE_SIZE;
- clear_fixmap(idx);
- set_fixmap(idx, phys);
- mapped_size += PAGE_SIZE;
- }
+ return early_ioremap(phys, size);
+}
+void __init __acpi_unmap_table(char *map, unsigned long size)
+{
+ if (!map || !size)
+ return;
- return ((unsigned char *)base + offset);
+ early_iounmap(map, size);
}
#ifdef CONFIG_PCI_MMCONFIG
}
}
-static int __init calibrate_by_pmtimer(long deltapm, long *delta)
+static int __init
+calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc)
{
const long pm_100ms = PMTMR_TICKS_PER_SEC / 10;
const long pm_thresh = pm_100ms / 100;
return -1;
#endif
- apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm);
+ apic_printk(APIC_VERBOSE, "... PM-Timer delta = %ld\n", deltapm);
/* Check, if the PM timer is available */
if (!deltapm)
if (deltapm > (pm_100ms - pm_thresh) &&
deltapm < (pm_100ms + pm_thresh)) {
- apic_printk(APIC_VERBOSE, "... PM timer result ok\n");
- } else {
- res = (((u64)deltapm) * mult) >> 22;
- do_div(res, 1000000);
- pr_warning("APIC calibration not consistent "
- "with PM Timer: %ldms instead of 100ms\n",
- (long)res);
- /* Correct the lapic counter value */
- res = (((u64)(*delta)) * pm_100ms);
+ apic_printk(APIC_VERBOSE, "... PM-Timer result ok\n");
+ return 0;
+ }
+
+ res = (((u64)deltapm) * mult) >> 22;
+ do_div(res, 1000000);
+ pr_warning("APIC calibration not consistent "
+ "with PM-Timer: %ldms instead of 100ms\n",(long)res);
+
+ /* Correct the lapic counter value */
+ res = (((u64)(*delta)) * pm_100ms);
+ do_div(res, deltapm);
+ pr_info("APIC delta adjusted to PM-Timer: "
+ "%lu (%ld)\n", (unsigned long)res, *delta);
+ *delta = (long)res;
+
+ /* Correct the tsc counter value */
+ if (cpu_has_tsc) {
+ res = (((u64)(*deltatsc)) * pm_100ms);
do_div(res, deltapm);
- pr_info("APIC delta adjusted to PM-Timer: "
- "%lu (%ld)\n", (unsigned long)res, *delta);
- *delta = (long)res;
+ apic_printk(APIC_VERBOSE, "TSC delta adjusted to "
+ "PM-Timer: %lu (%ld) \n",
+ (unsigned long)res, *deltatsc);
+ *deltatsc = (long)res;
}
return 0;
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
void (*real_handler)(struct clock_event_device *dev);
unsigned long deltaj;
- long delta;
+ long delta, deltatsc;
int pm_referenced = 0;
local_irq_disable();
delta = lapic_cal_t1 - lapic_cal_t2;
apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
+ deltatsc = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
+
/* we trust the PM based calibration if possible */
pm_referenced = !calibrate_by_pmtimer(lapic_cal_pm2 - lapic_cal_pm1,
- &delta);
+ &delta, &deltatsc);
/* Calculate the scaled math multiplication factor */
lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
calibration_result);
if (cpu_has_tsc) {
- delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
"%ld.%04ld MHz.\n",
- (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ),
- (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ));
+ (deltatsc / LAPIC_CAL_LOOPS) / (1000000 / HZ),
+ (deltatsc / LAPIC_CAL_LOOPS) % (1000000 / HZ));
}
apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
OFFSET(PT_DS, pt_regs, ds);
OFFSET(PT_ES, pt_regs, es);
OFFSET(PT_FS, pt_regs, fs);
+ OFFSET(PT_GS, pt_regs, gs);
OFFSET(PT_ORIG_EAX, pt_regs, orig_ax);
OFFSET(PT_EIP, pt_regs, ip);
OFFSET(PT_CS, pt_regs, cs);
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/hypervisor.h>
+#include <asm/stackprotector.h>
#include "cpu.h"
[GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
[GDT_ENTRY_PERCPU] = { { { 0x0000ffff, 0x00cf9200 } } },
+ GDT_STACK_CANARY_INIT
#endif
} };
EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
* signs here...
*/
if (cpu_has(c, df->feature) &&
- ((s32)df->feature < 0 ?
- (u32)df->feature > (u32)c->extended_cpuid_level :
- (s32)df->feature > (s32)c->cpuid_level)) {
+ ((s32)df->level < 0 ?
+ (u32)df->level > (u32)c->extended_cpuid_level :
+ (s32)df->level > (s32)c->cpuid_level)) {
clear_cpu_cap(c, df->feature);
if (warn)
printk(KERN_WARNING
df->level);
}
}
-}
+}
/*
* Naming convention should be: <Name> [(<Codename>)]
loadsegment(gs, 0);
wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
#endif
+ load_stack_canary_segment();
}
/* Current gdt points %fs at the "master" per-cpu area: after this,
DEFINE_PER_CPU_FIRST(union irq_stack_union,
irq_stack_union) __aligned(PAGE_SIZE);
-#ifdef CONFIG_SMP
-DEFINE_PER_CPU(char *, irq_stack_ptr); /* will be set during per cpu init */
-#else
DEFINE_PER_CPU(char *, irq_stack_ptr) =
- per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
-#endif
+ init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
DEFINE_PER_CPU(unsigned long, kernel_stack) =
(unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
*/
DEFINE_PER_CPU(struct orig_ist, orig_ist);
-#else
+#else /* x86_64 */
-/* Make sure %fs is initialized properly in idle threads */
+#ifdef CONFIG_CC_STACKPROTECTOR
+DEFINE_PER_CPU(unsigned long, stack_canary);
+#endif
+
+/* Make sure %fs and %gs are initialized properly in idle threads */
struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
{
memset(regs, 0, sizeof(struct pt_regs));
regs->fs = __KERNEL_PERCPU;
+ regs->gs = __KERNEL_STACK_CANARY;
return regs;
}
-#endif
+#endif /* x86_64 */
/*
* cpu_init() initializes state that is per-CPU. Some data is already
__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
#endif
- /* Clear %gs. */
- asm volatile ("mov %0, %%gs" : : "r" (0));
-
/* Clear all 6 debug registers: */
set_debugreg(0, 0);
set_debugreg(0, 1);
frame = frame->next_frame;
bp = (unsigned long) frame;
} else {
- ops->address(data, addr, bp == 0);
+ ops->address(data, addr, 0);
}
print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
}
#include <asm/setup.h>
#include <xen/hvc-console.h>
#include <asm/pci-direct.h>
-#include <asm/pgtable.h>
#include <asm/fixmap.h>
+#include <asm/pgtable.h>
#include <linux/usb/ehci_def.h>
/* Simple VGA output */
* 1C(%esp) - %ds
* 20(%esp) - %es
* 24(%esp) - %fs
- * 28(%esp) - orig_eax
- * 2C(%esp) - %eip
- * 30(%esp) - %cs
- * 34(%esp) - %eflags
- * 38(%esp) - %oldesp
- * 3C(%esp) - %oldss
+ * 28(%esp) - %gs saved iff !CONFIG_X86_32_LAZY_GS
+ * 2C(%esp) - orig_eax
+ * 30(%esp) - %eip
+ * 34(%esp) - %cs
+ * 38(%esp) - %eflags
+ * 3C(%esp) - %oldesp
+ * 40(%esp) - %oldss
*
* "current" is in register %ebx during any slow entries.
*/
#define resume_userspace_sig resume_userspace
#endif
-#define SAVE_ALL \
- cld; \
- pushl %fs; \
- CFI_ADJUST_CFA_OFFSET 4;\
- /*CFI_REL_OFFSET fs, 0;*/\
- pushl %es; \
- CFI_ADJUST_CFA_OFFSET 4;\
- /*CFI_REL_OFFSET es, 0;*/\
- pushl %ds; \
- CFI_ADJUST_CFA_OFFSET 4;\
- /*CFI_REL_OFFSET ds, 0;*/\
- pushl %eax; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET eax, 0;\
- pushl %ebp; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET ebp, 0;\
- pushl %edi; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET edi, 0;\
- pushl %esi; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET esi, 0;\
- pushl %edx; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET edx, 0;\
- pushl %ecx; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET ecx, 0;\
- pushl %ebx; \
- CFI_ADJUST_CFA_OFFSET 4;\
- CFI_REL_OFFSET ebx, 0;\
- movl $(__USER_DS), %edx; \
- movl %edx, %ds; \
- movl %edx, %es; \
- movl $(__KERNEL_PERCPU), %edx; \
+/*
+ * User gs save/restore
+ *
+ * %gs is used for userland TLS and kernel only uses it for stack
+ * canary which is required to be at %gs:20 by gcc. Read the comment
+ * at the top of stackprotector.h for more info.
+ *
+ * Local labels 98 and 99 are used.
+ */
+#ifdef CONFIG_X86_32_LAZY_GS
+
+ /* unfortunately push/pop can't be no-op */
+.macro PUSH_GS
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+.endm
+.macro POP_GS pop=0
+ addl $(4 + \pop), %esp
+ CFI_ADJUST_CFA_OFFSET -(4 + \pop)
+.endm
+.macro POP_GS_EX
+.endm
+
+ /* all the rest are no-op */
+.macro PTGS_TO_GS
+.endm
+.macro PTGS_TO_GS_EX
+.endm
+.macro GS_TO_REG reg
+.endm
+.macro REG_TO_PTGS reg
+.endm
+.macro SET_KERNEL_GS reg
+.endm
+
+#else /* CONFIG_X86_32_LAZY_GS */
+
+.macro PUSH_GS
+ pushl %gs
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET gs, 0*/
+.endm
+
+.macro POP_GS pop=0
+98: popl %gs
+ CFI_ADJUST_CFA_OFFSET -4
+ /*CFI_RESTORE gs*/
+ .if \pop <> 0
+ add $\pop, %esp
+ CFI_ADJUST_CFA_OFFSET -\pop
+ .endif
+.endm
+.macro POP_GS_EX
+.pushsection .fixup, "ax"
+99: movl $0, (%esp)
+ jmp 98b
+.section __ex_table, "a"
+ .align 4
+ .long 98b, 99b
+.popsection
+.endm
+
+.macro PTGS_TO_GS
+98: mov PT_GS(%esp), %gs
+.endm
+.macro PTGS_TO_GS_EX
+.pushsection .fixup, "ax"
+99: movl $0, PT_GS(%esp)
+ jmp 98b
+.section __ex_table, "a"
+ .align 4
+ .long 98b, 99b
+.popsection
+.endm
+
+.macro GS_TO_REG reg
+ movl %gs, \reg
+ /*CFI_REGISTER gs, \reg*/
+.endm
+.macro REG_TO_PTGS reg
+ movl \reg, PT_GS(%esp)
+ /*CFI_REL_OFFSET gs, PT_GS*/
+.endm
+.macro SET_KERNEL_GS reg
+ movl $(__KERNEL_STACK_CANARY), \reg
+ movl \reg, %gs
+.endm
+
+#endif /* CONFIG_X86_32_LAZY_GS */
+
+.macro SAVE_ALL
+ cld
+ PUSH_GS
+ pushl %fs
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET fs, 0;*/
+ pushl %es
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET es, 0;*/
+ pushl %ds
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ds, 0;*/
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eax, 0
+ pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebp, 0
+ pushl %edi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edi, 0
+ pushl %esi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esi, 0
+ pushl %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx, 0
+ pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx, 0
+ pushl %ebx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebx, 0
+ movl $(__USER_DS), %edx
+ movl %edx, %ds
+ movl %edx, %es
+ movl $(__KERNEL_PERCPU), %edx
movl %edx, %fs
+ SET_KERNEL_GS %edx
+.endm
-#define RESTORE_INT_REGS \
- popl %ebx; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE ebx;\
- popl %ecx; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE ecx;\
- popl %edx; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE edx;\
- popl %esi; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE esi;\
- popl %edi; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE edi;\
- popl %ebp; \
- CFI_ADJUST_CFA_OFFSET -4;\
- CFI_RESTORE ebp;\
- popl %eax; \
- CFI_ADJUST_CFA_OFFSET -4;\
+.macro RESTORE_INT_REGS
+ popl %ebx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE ebx
+ popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE ecx
+ popl %edx
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE edx
+ popl %esi
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE esi
+ popl %edi
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE edi
+ popl %ebp
+ CFI_ADJUST_CFA_OFFSET -4
+ CFI_RESTORE ebp
+ popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
CFI_RESTORE eax
+.endm
-#define RESTORE_REGS \
- RESTORE_INT_REGS; \
-1: popl %ds; \
- CFI_ADJUST_CFA_OFFSET -4;\
- /*CFI_RESTORE ds;*/\
-2: popl %es; \
- CFI_ADJUST_CFA_OFFSET -4;\
- /*CFI_RESTORE es;*/\
-3: popl %fs; \
- CFI_ADJUST_CFA_OFFSET -4;\
- /*CFI_RESTORE fs;*/\
-.pushsection .fixup,"ax"; \
-4: movl $0,(%esp); \
- jmp 1b; \
-5: movl $0,(%esp); \
- jmp 2b; \
-6: movl $0,(%esp); \
- jmp 3b; \
-.section __ex_table,"a";\
- .align 4; \
- .long 1b,4b; \
- .long 2b,5b; \
- .long 3b,6b; \
+.macro RESTORE_REGS pop=0
+ RESTORE_INT_REGS
+1: popl %ds
+ CFI_ADJUST_CFA_OFFSET -4
+ /*CFI_RESTORE ds;*/
+2: popl %es
+ CFI_ADJUST_CFA_OFFSET -4
+ /*CFI_RESTORE es;*/
+3: popl %fs
+ CFI_ADJUST_CFA_OFFSET -4
+ /*CFI_RESTORE fs;*/
+ POP_GS \pop
+.pushsection .fixup, "ax"
+4: movl $0, (%esp)
+ jmp 1b
+5: movl $0, (%esp)
+ jmp 2b
+6: movl $0, (%esp)
+ jmp 3b
+.section __ex_table, "a"
+ .align 4
+ .long 1b, 4b
+ .long 2b, 5b
+ .long 3b, 6b
.popsection
+ POP_GS_EX
+.endm
-#define RING0_INT_FRAME \
- CFI_STARTPROC simple;\
- CFI_SIGNAL_FRAME;\
- CFI_DEF_CFA esp, 3*4;\
- /*CFI_OFFSET cs, -2*4;*/\
+.macro RING0_INT_FRAME
+ CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA esp, 3*4
+ /*CFI_OFFSET cs, -2*4;*/
CFI_OFFSET eip, -3*4
+.endm
-#define RING0_EC_FRAME \
- CFI_STARTPROC simple;\
- CFI_SIGNAL_FRAME;\
- CFI_DEF_CFA esp, 4*4;\
- /*CFI_OFFSET cs, -2*4;*/\
+.macro RING0_EC_FRAME
+ CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA esp, 4*4
+ /*CFI_OFFSET cs, -2*4;*/
CFI_OFFSET eip, -3*4
+.endm
-#define RING0_PTREGS_FRAME \
- CFI_STARTPROC simple;\
- CFI_SIGNAL_FRAME;\
- CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\
- /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\
- CFI_OFFSET eip, PT_EIP-PT_OLDESP;\
- /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\
- /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\
- CFI_OFFSET eax, PT_EAX-PT_OLDESP;\
- CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\
- CFI_OFFSET edi, PT_EDI-PT_OLDESP;\
- CFI_OFFSET esi, PT_ESI-PT_OLDESP;\
- CFI_OFFSET edx, PT_EDX-PT_OLDESP;\
- CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\
+.macro RING0_PTREGS_FRAME
+ CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA esp, PT_OLDESP-PT_EBX
+ /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/
+ CFI_OFFSET eip, PT_EIP-PT_OLDESP
+ /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/
+ /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/
+ CFI_OFFSET eax, PT_EAX-PT_OLDESP
+ CFI_OFFSET ebp, PT_EBP-PT_OLDESP
+ CFI_OFFSET edi, PT_EDI-PT_OLDESP
+ CFI_OFFSET esi, PT_ESI-PT_OLDESP
+ CFI_OFFSET edx, PT_EDX-PT_OLDESP
+ CFI_OFFSET ecx, PT_ECX-PT_OLDESP
CFI_OFFSET ebx, PT_EBX-PT_OLDESP
+.endm
ENTRY(ret_from_fork)
CFI_STARTPROC
xorl %ebp,%ebp
TRACE_IRQS_ON
1: mov PT_FS(%esp), %fs
+ PTGS_TO_GS
ENABLE_INTERRUPTS_SYSEXIT
#ifdef CONFIG_AUDITSYSCALL
.align 4
.long 1b,2b
.popsection
+ PTGS_TO_GS_EX
ENDPROC(ia32_sysenter_target)
# system call handler stub
restore_nocheck:
TRACE_IRQS_IRET
restore_nocheck_notrace:
- RESTORE_REGS
- addl $4, %esp # skip orig_eax/error_code
+ RESTORE_REGS 4 # skip orig_eax/error_code
CFI_ADJUST_CFA_OFFSET -4
irq_return:
INTERRUPT_RETURN
END(syscall_badsys)
CFI_ENDPROC
-#define FIXUP_ESPFIX_STACK \
- /* since we are on a wrong stack, we cant make it a C code :( */ \
- PER_CPU(gdt_page, %ebx); \
- GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \
- addl %esp, %eax; \
- pushl $__KERNEL_DS; \
- CFI_ADJUST_CFA_OFFSET 4; \
- pushl %eax; \
- CFI_ADJUST_CFA_OFFSET 4; \
- lss (%esp), %esp; \
- CFI_ADJUST_CFA_OFFSET -8;
-#define UNWIND_ESPFIX_STACK \
- movl %ss, %eax; \
- /* see if on espfix stack */ \
- cmpw $__ESPFIX_SS, %ax; \
- jne 27f; \
- movl $__KERNEL_DS, %eax; \
- movl %eax, %ds; \
- movl %eax, %es; \
- /* switch to normal stack */ \
- FIXUP_ESPFIX_STACK; \
-27:;
+/*
+ * System calls that need a pt_regs pointer.
+ */
+#define PTREGSCALL(name) \
+ ALIGN; \
+ptregs_##name: \
+ leal 4(%esp),%eax; \
+ jmp sys_##name;
+
+PTREGSCALL(iopl)
+PTREGSCALL(fork)
+PTREGSCALL(clone)
+PTREGSCALL(vfork)
+PTREGSCALL(execve)
+PTREGSCALL(sigaltstack)
+PTREGSCALL(sigreturn)
+PTREGSCALL(rt_sigreturn)
+PTREGSCALL(vm86)
+PTREGSCALL(vm86old)
+
+.macro FIXUP_ESPFIX_STACK
+ /* since we are on a wrong stack, we cant make it a C code :( */
+ PER_CPU(gdt_page, %ebx)
+ GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah)
+ addl %esp, %eax
+ pushl $__KERNEL_DS
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ lss (%esp), %esp
+ CFI_ADJUST_CFA_OFFSET -8
+.endm
+.macro UNWIND_ESPFIX_STACK
+ movl %ss, %eax
+ /* see if on espfix stack */
+ cmpw $__ESPFIX_SS, %ax
+ jne 27f
+ movl $__KERNEL_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ /* switch to normal stack */
+ FIXUP_ESPFIX_STACK
+27:
+.endm
/*
* Build the entry stubs and pointer table with some assembler magic.
CFI_ADJUST_CFA_OFFSET 4
ALIGN
error_code:
- /* the function address is in %fs's slot on the stack */
+ /* the function address is in %gs's slot on the stack */
+ pushl %fs
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET fs, 0*/
pushl %es
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET es, 0*/
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET ebx, 0
cld
- pushl %fs
- CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET fs, 0*/
movl $(__KERNEL_PERCPU), %ecx
movl %ecx, %fs
UNWIND_ESPFIX_STACK
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
- /*CFI_REGISTER es, ecx*/
- movl PT_FS(%esp), %edi # get the function address
+ GS_TO_REG %ecx
+ movl PT_GS(%esp), %edi # get the function address
movl PT_ORIG_EAX(%esp), %edx # get the error code
movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
- mov %ecx, PT_FS(%esp)
- /*CFI_REL_OFFSET fs, ES*/
+ REG_TO_PTGS %ecx
+ SET_KERNEL_GS %ecx
movl $(__USER_DS), %ecx
movl %ecx, %ds
movl %ecx, %es
* by hand onto the new stack - while updating the return eip past
* the instruction that would have done it for sysenter.
*/
-#define FIX_STACK(offset, ok, label) \
- cmpw $__KERNEL_CS,4(%esp); \
- jne ok; \
-label: \
- movl TSS_sysenter_sp0+offset(%esp),%esp; \
- CFI_DEF_CFA esp, 0; \
- CFI_UNDEFINED eip; \
- pushfl; \
- CFI_ADJUST_CFA_OFFSET 4; \
- pushl $__KERNEL_CS; \
- CFI_ADJUST_CFA_OFFSET 4; \
- pushl $sysenter_past_esp; \
- CFI_ADJUST_CFA_OFFSET 4; \
+.macro FIX_STACK offset ok label
+ cmpw $__KERNEL_CS, 4(%esp)
+ jne \ok
+\label:
+ movl TSS_sysenter_sp0 + \offset(%esp), %esp
+ CFI_DEF_CFA esp, 0
+ CFI_UNDEFINED eip
+ pushfl
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $__KERNEL_CS
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $sysenter_past_esp
+ CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET eip, 0
+.endm
ENTRY(debug)
RING0_INT_FRAME
cmpl $ia32_sysenter_target,(%esp)
jne debug_stack_correct
- FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
+ FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
debug_stack_correct:
pushl $-1 # mark this as an int
CFI_ADJUST_CFA_OFFSET 4
nmi_stack_fixup:
RING0_INT_FRAME
- FIX_STACK(12,nmi_stack_correct, 1)
+ FIX_STACK 12, nmi_stack_correct, 1
jmp nmi_stack_correct
nmi_debug_stack_check:
jb nmi_stack_correct
cmpl $debug_esp_fix_insn,(%esp)
ja nmi_stack_correct
- FIX_STACK(24,nmi_stack_correct, 1)
+ FIX_STACK 24, nmi_stack_correct, 1
jmp nmi_stack_correct
nmi_espfix_stack:
{
struct acpi_table_header *header = NULL;
int i = 0;
+ acpi_size tbl_size;
- while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
+ while (ACPI_SUCCESS(acpi_get_table_with_size("OEM1", i++, &header, &tbl_size))) {
if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
struct oem_table *t = (struct oem_table *)header;
oem_addrX = t->OEMTableAddr;
oem_size = t->OEMTableSize;
+ early_acpi_os_unmap_memory(header, tbl_size);
*oem_addr = (unsigned long)__acpi_map_table(oem_addrX,
oem_size);
return 0;
}
+ early_acpi_os_unmap_memory(header, tbl_size);
}
return -1;
}
void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
{
+ if (!oem_addr)
+ return;
+
+ __acpi_unmap_table((char *)oem_addr, oem_size);
}
#endif
#include <asm/asm-offsets.h>
#include <asm/setup.h>
#include <asm/processor-flags.h>
+#include <asm/percpu.h>
/* Physical address */
#define pa(X) ((X) - __PAGE_OFFSET)
movl $(__KERNEL_PERCPU), %eax
movl %eax,%fs # set this cpu's percpu
- xorl %eax,%eax # Clear GS and LDT
+#ifdef CONFIG_CC_STACKPROTECTOR
+ /*
+ * The linker can't handle this by relocation. Manually set
+ * base address in stack canary segment descriptor.
+ */
+ cmpb $0,ready
+ jne 1f
+ movl $per_cpu__gdt_page,%eax
+ movl $per_cpu__stack_canary,%ecx
+ subl $20, %ecx
+ movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
+ shrl $16, %ecx
+ movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
+ movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax)
+1:
+#endif
+ movl $(__KERNEL_STACK_CANARY),%eax
movl %eax,%gs
+
+ xorl %eax,%eax # Clear LDT
lldt %ax
cld # gcc2 wants the direction flag cleared at all times
pushq $0
popfq
-#ifdef CONFIG_SMP
- /*
- * Fix up static pointers that need __per_cpu_load added. The assembler
- * is unable to do this directly. This is only needed for the boot cpu.
- * These values are set up with the correct base addresses by C code for
- * secondary cpus.
- */
- movq initial_gs(%rip), %rax
- cmpl $0, per_cpu__cpu_number(%rax)
- jne 1f
- addq %rax, early_gdt_descr_base(%rip)
-1:
-#endif
/*
* We must switch to a new descriptor in kernel space for the GDT
* because soon the kernel won't have access anymore to the userspace
ENTRY(initial_code)
.quad x86_64_start_kernel
ENTRY(initial_gs)
-#ifdef CONFIG_SMP
- .quad __per_cpu_load
-#else
- .quad PER_CPU_VAR(irq_stack_union)
-#endif
+ .quad INIT_PER_CPU_VAR(irq_stack_union)
__FINITDATA
ENTRY(stack_start)
early_gdt_descr:
.word GDT_ENTRIES*8-1
early_gdt_descr_base:
- .quad per_cpu__gdt_page
+ .quad INIT_PER_CPU_VAR(gdt_page)
ENTRY(phys_base)
/* This must match the first entry in level2_kernel_pgt */
now = hpet_readl(HPET_COUNTER);
cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
+ /* Make sure we use edge triggered interrupts */
+ cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
}
#ifdef CONFIG_X86_32
-asmlinkage long sys_iopl(unsigned long regsp)
+long sys_iopl(struct pt_regs *regs)
{
- struct pt_regs *regs = (struct pt_regs *)®sp;
unsigned int level = regs->bx;
struct thread_struct *t = ¤t->thread;
int rc;
#include <asm/mmu_context.h>
#include <asm/io.h>
-#define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
-static u64 kexec_pgd[512] PAGE_ALIGNED;
-static u64 kexec_pud0[512] PAGE_ALIGNED;
-static u64 kexec_pmd0[512] PAGE_ALIGNED;
-static u64 kexec_pte0[512] PAGE_ALIGNED;
-static u64 kexec_pud1[512] PAGE_ALIGNED;
-static u64 kexec_pmd1[512] PAGE_ALIGNED;
-static u64 kexec_pte1[512] PAGE_ALIGNED;
-
static void init_level2_page(pmd_t *level2p, unsigned long addr)
{
unsigned long end_addr;
return result;
}
+static void free_transition_pgtable(struct kimage *image)
+{
+ free_page((unsigned long)image->arch.pud);
+ free_page((unsigned long)image->arch.pmd);
+ free_page((unsigned long)image->arch.pte);
+}
+
+static int init_transition_pgtable(struct kimage *image, pgd_t *pgd)
+{
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ unsigned long vaddr, paddr;
+ int result = -ENOMEM;
+
+ vaddr = (unsigned long)relocate_kernel;
+ paddr = __pa(page_address(image->control_code_page)+PAGE_SIZE);
+ pgd += pgd_index(vaddr);
+ if (!pgd_present(*pgd)) {
+ pud = (pud_t *)get_zeroed_page(GFP_KERNEL);
+ if (!pud)
+ goto err;
+ image->arch.pud = pud;
+ set_pgd(pgd, __pgd(__pa(pud) | _KERNPG_TABLE));
+ }
+ pud = pud_offset(pgd, vaddr);
+ if (!pud_present(*pud)) {
+ pmd = (pmd_t *)get_zeroed_page(GFP_KERNEL);
+ if (!pmd)
+ goto err;
+ image->arch.pmd = pmd;
+ set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
+ }
+ pmd = pmd_offset(pud, vaddr);
+ if (!pmd_present(*pmd)) {
+ pte = (pte_t *)get_zeroed_page(GFP_KERNEL);
+ if (!pte)
+ goto err;
+ image->arch.pte = pte;
+ set_pmd(pmd, __pmd(__pa(pte) | _KERNPG_TABLE));
+ }
+ pte = pte_offset_kernel(pmd, vaddr);
+ set_pte(pte, pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL_EXEC));
+ return 0;
+err:
+ free_transition_pgtable(image);
+ return result;
+}
+
static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
{
pgd_t *level4p;
+ int result;
level4p = (pgd_t *)__va(start_pgtable);
- return init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT);
+ result = init_level4_page(image, level4p, 0, max_pfn << PAGE_SHIFT);
+ if (result)
+ return result;
+ return init_transition_pgtable(image, level4p);
}
static void set_idt(void *newidt, u16 limit)
void machine_kexec_cleanup(struct kimage *image)
{
- return;
+ free_transition_pgtable(image);
}
/*
memcpy(control_page, relocate_kernel, PAGE_SIZE);
page_list[PA_CONTROL_PAGE] = virt_to_phys(control_page);
- page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
- page_list[PA_PGD] = virt_to_phys(&kexec_pgd);
- page_list[VA_PGD] = (unsigned long)kexec_pgd;
- page_list[PA_PUD_0] = virt_to_phys(&kexec_pud0);
- page_list[VA_PUD_0] = (unsigned long)kexec_pud0;
- page_list[PA_PMD_0] = virt_to_phys(&kexec_pmd0);
- page_list[VA_PMD_0] = (unsigned long)kexec_pmd0;
- page_list[PA_PTE_0] = virt_to_phys(&kexec_pte0);
- page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
- page_list[PA_PUD_1] = virt_to_phys(&kexec_pud1);
- page_list[VA_PUD_1] = (unsigned long)kexec_pud1;
- page_list[PA_PMD_1] = virt_to_phys(&kexec_pmd1);
- page_list[VA_PMD_1] = (unsigned long)kexec_pmd1;
- page_list[PA_PTE_1] = virt_to_phys(&kexec_pte1);
- page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
-
page_list[PA_TABLE_PAGE] =
(unsigned long)__pa(page_address(image->control_code_page));
static void __init platform_detect(void)
{
/* stopgap until OFW support is added to the kernel */
- olpc_platform_info.boardrev = 0xc2;
+ olpc_platform_info.boardrev = olpc_board(0xc2);
}
#endif
return __get_cpu_var(paravirt_lazy_mode);
}
+void arch_flush_lazy_mmu_mode(void)
+{
+ preempt_disable();
+
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) {
+ WARN_ON(preempt_count() == 1);
+ arch_leave_lazy_mmu_mode();
+ arch_enter_lazy_mmu_mode();
+ }
+
+ preempt_enable();
+}
+
+void arch_flush_lazy_cpu_mode(void)
+{
+ preempt_disable();
+
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
+ WARN_ON(preempt_count() == 1);
+ arch_leave_lazy_cpu_mode();
+ arch_enter_lazy_cpu_mode();
+ }
+
+ preempt_enable();
+}
+
struct pv_info pv_info = {
.name = "bare hardware",
.paravirt_enabled = 0,
#include <stdarg.h>
+#include <linux/stackprotector.h>
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/sched.h>
{
int cpu = smp_processor_id();
+ /*
+ * If we're the non-boot CPU, nothing set the stack canary up
+ * for us. CPU0 already has it initialized but no harm in
+ * doing it again. This is a good place for updating it, as
+ * we wont ever return from this function (so the invalid
+ * canaries already on the stack wont ever trigger).
+ */
+ boot_init_stack_canary();
+
current_thread_info()->status |= TS_POLLING;
/* endless idle loop with no priority at all */
if (user_mode_vm(regs)) {
sp = regs->sp;
ss = regs->ss & 0xffff;
- savesegment(gs, gs);
+ gs = get_user_gs(regs);
} else {
sp = (unsigned long) (®s->sp);
savesegment(ss, ss);
regs.ds = __USER_DS;
regs.es = __USER_DS;
regs.fs = __KERNEL_PERCPU;
+ regs.gs = __KERNEL_STACK_CANARY;
regs.orig_ax = -1;
regs.ip = (unsigned long) kernel_thread_helper;
regs.cs = __KERNEL_CS | get_kernel_rpl();
p->thread.ip = (unsigned long) ret_from_fork;
- savesegment(gs, p->thread.gs);
+ task_user_gs(p) = get_user_gs(regs);
tsk = current;
if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
void
start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
{
- __asm__("movl %0, %%gs" : : "r"(0));
+ set_user_gs(regs, 0);
regs->fs = 0;
set_fs(USER_DS);
regs->ds = __USER_DS;
* used %fs or %gs (it does not today), or if the kernel is
* running inside of a hypervisor layer.
*/
- savesegment(gs, prev->gs);
+ lazy_save_gs(prev->gs);
/*
* Load the per-thread Thread-Local Storage descriptor.
* Restore %gs if needed (which is common)
*/
if (prev->gs | next->gs)
- loadsegment(gs, next->gs);
+ lazy_load_gs(next->gs);
percpu_write(current_task, next_p);
return prev_p;
}
-asmlinkage int sys_fork(struct pt_regs regs)
+int sys_fork(struct pt_regs *regs)
{
- return do_fork(SIGCHLD, regs.sp, ®s, 0, NULL, NULL);
+ return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
}
-asmlinkage int sys_clone(struct pt_regs regs)
+int sys_clone(struct pt_regs *regs)
{
unsigned long clone_flags;
unsigned long newsp;
int __user *parent_tidptr, *child_tidptr;
- clone_flags = regs.bx;
- newsp = regs.cx;
- parent_tidptr = (int __user *)regs.dx;
- child_tidptr = (int __user *)regs.di;
+ clone_flags = regs->bx;
+ newsp = regs->cx;
+ parent_tidptr = (int __user *)regs->dx;
+ child_tidptr = (int __user *)regs->di;
if (!newsp)
- newsp = regs.sp;
- return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr);
+ newsp = regs->sp;
+ return do_fork(clone_flags, newsp, regs, 0, parent_tidptr, child_tidptr);
}
/*
* do not have enough call-clobbered registers to hold all
* the information you need.
*/
-asmlinkage int sys_vfork(struct pt_regs regs)
+int sys_vfork(struct pt_regs *regs)
{
- return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs.sp, ®s, 0, NULL, NULL);
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp, regs, 0, NULL, NULL);
}
/*
* sys_execve() executes a new program.
*/
-asmlinkage int sys_execve(struct pt_regs regs)
+int sys_execve(struct pt_regs *regs)
{
int error;
char *filename;
- filename = getname((char __user *) regs.bx);
+ filename = getname((char __user *) regs->bx);
error = PTR_ERR(filename);
if (IS_ERR(filename))
goto out;
error = do_execve(filename,
- (char __user * __user *) regs.cx,
- (char __user * __user *) regs.dx,
- ®s);
+ (char __user * __user *) regs->cx,
+ (char __user * __user *) regs->dx,
+ regs);
if (error == 0) {
/* Make sure we don't return using sysenter.. */
set_thread_flag(TIF_IRET);
current_thread_info()->status |= TS_POLLING;
/*
- * If we're the non-boot CPU, nothing set the PDA stack
- * canary up for us - and if we are the boot CPU we have
- * a 0 stack canary. This is a good place for updating
- * it, as we wont ever return from this function (so the
- * invalid canaries already on the stack wont ever
- * trigger):
+ * If we're the non-boot CPU, nothing set the stack canary up
+ * for us. CPU0 already has it initialized but no harm in
+ * doing it again. This is a good place for updating it, as
+ * we wont ever return from this function (so the invalid
+ * canaries already on the stack wont ever trigger).
*/
boot_init_stack_canary();
static unsigned long *pt_regs_access(struct pt_regs *regs, unsigned long regno)
{
BUILD_BUG_ON(offsetof(struct pt_regs, bx) != 0);
- regno >>= 2;
- if (regno > FS)
- --regno;
- return ®s->bx + regno;
+ return ®s->bx + (regno >> 2);
}
static u16 get_segment_reg(struct task_struct *task, unsigned long offset)
if (offset != offsetof(struct user_regs_struct, gs))
retval = *pt_regs_access(task_pt_regs(task), offset);
else {
- retval = task->thread.gs;
if (task == current)
- savesegment(gs, retval);
+ retval = get_user_gs(task_pt_regs(task));
+ else
+ retval = task_user_gs(task);
}
return retval;
}
break;
case offsetof(struct user_regs_struct, gs):
- task->thread.gs = value;
if (task == current)
- /*
- * The user-mode %gs is not affected by
- * kernel entry, so we must update the CPU.
- */
- loadsegment(gs, value);
+ set_user_gs(task_pt_regs(task), value);
+ else
+ task_user_gs(task) = value;
}
return 0;
static void ptrace_bts_detach(struct task_struct *child)
{
- if (unlikely(child->bts)) {
- ds_release_bts(child->bts);
- child->bts = NULL;
-
- ptrace_bts_free_buffer(child);
- }
+ /*
+ * Ptrace_detach() races with ptrace_untrace() in case
+ * the child dies and is reaped by another thread.
+ *
+ * We only do the memory accounting at this point and
+ * leave the buffer deallocation and the bts tracer
+ * release to ptrace_bts_untrace() which will be called
+ * later on with tasklist_lock held.
+ */
+ release_locked_buffer(child->bts_buffer, child->bts_size);
}
#else
static inline void ptrace_bts_fork(struct task_struct *tsk) {}
* %rdx start address
*/
- /* map the control page at its virtual address */
-
- movq $0x0000ff8000000000, %r10 /* mask */
- mov $(39 - 3), %cl /* bits to shift */
- movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 /* address to map */
-
- movq %r11, %r9
- andq %r10, %r9
- shrq %cl, %r9
-
- movq PTR(VA_PGD)(%rsi), %r8
- addq %r8, %r9
- movq PTR(PA_PUD_0)(%rsi), %r8
- orq $PAGE_ATTR, %r8
- movq %r8, (%r9)
-
- shrq $9, %r10
- sub $9, %cl
-
- movq %r11, %r9
- andq %r10, %r9
- shrq %cl, %r9
-
- movq PTR(VA_PUD_0)(%rsi), %r8
- addq %r8, %r9
- movq PTR(PA_PMD_0)(%rsi), %r8
- orq $PAGE_ATTR, %r8
- movq %r8, (%r9)
-
- shrq $9, %r10
- sub $9, %cl
-
- movq %r11, %r9
- andq %r10, %r9
- shrq %cl, %r9
-
- movq PTR(VA_PMD_0)(%rsi), %r8
- addq %r8, %r9
- movq PTR(PA_PTE_0)(%rsi), %r8
- orq $PAGE_ATTR, %r8
- movq %r8, (%r9)
-
- shrq $9, %r10
- sub $9, %cl
-
- movq %r11, %r9
- andq %r10, %r9
- shrq %cl, %r9
-
- movq PTR(VA_PTE_0)(%rsi), %r8
- addq %r8, %r9
- movq PTR(PA_CONTROL_PAGE)(%rsi), %r8
- orq $PAGE_ATTR, %r8
- movq %r8, (%r9)
-
- /* identity map the control page at its physical address */
-
- movq $0x0000ff8000000000, %r10 /* mask */
- mov $(39 - 3), %cl /* bits to shift */
- movq PTR(PA_CONTROL_PAGE)(%rsi), %r11 /* address to map */
-
- movq %r11, %r9
- andq %r10, %r9
- shrq %cl, %r9
-
- movq PTR(VA_PGD)(%rsi), %r8
- addq %r8, %r9
- movq PTR(PA_PUD_1)(%rsi), %r8
- orq $PAGE_ATTR, %r8
- movq %r8, (%r9)
-
- shrq $9, %r10
- sub $9, %cl
-
- movq %r11, %r9
- andq %r10, %r9
- shrq %cl, %r9
-
- movq PTR(VA_PUD_1)(%rsi), %r8
- addq %r8, %r9
- movq PTR(PA_PMD_1)(%rsi), %r8
- orq $PAGE_ATTR, %r8
- movq %r8, (%r9)
-
- shrq $9, %r10
- sub $9, %cl
-
- movq %r11, %r9
- andq %r10, %r9
- shrq %cl, %r9
-
- movq PTR(VA_PMD_1)(%rsi), %r8
- addq %r8, %r9
- movq PTR(PA_PTE_1)(%rsi), %r8
- orq $PAGE_ATTR, %r8
- movq %r8, (%r9)
-
- shrq $9, %r10
- sub $9, %cl
-
- movq %r11, %r9
- andq %r10, %r9
- shrq %cl, %r9
-
- movq PTR(VA_PTE_1)(%rsi), %r8
- addq %r8, %r9
- movq PTR(PA_CONTROL_PAGE)(%rsi), %r8
- orq $PAGE_ATTR, %r8
- movq %r8, (%r9)
-
-relocate_new_kernel:
- /* %rdi indirection_page
- * %rsi page_list
- * %rdx start address
- */
-
/* zero out flags, and disable interrupts */
pushq $0
popfq
/* get physical address of page table now too */
movq PTR(PA_TABLE_PAGE)(%rsi), %rcx
- /* switch to new set of page tables */
- movq PTR(PA_PGD)(%rsi), %r9
- movq %r9, %cr3
+ /* Switch to the identity mapped page tables */
+ movq %rcx, %cr3
/* setup a new stack at the end of the physical control page */
lea PAGE_SIZE(%r8), %rsp
jmp 1f
1:
- /* Switch to the identity mapped page tables,
- * and flush the TLB.
- */
+ /* Flush the TLB (needed?) */
movq %rcx, %cr3
/* Do the copies */
#include <asm/proto.h>
#include <asm/cpumask.h>
#include <asm/cpu.h>
+#include <asm/stackprotector.h>
#ifdef CONFIG_DEBUG_PER_CPU_MAPS
# define DBG(x...) printk(KERN_DEBUG x)
per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
per_cpu(cpu_number, cpu) = cpu;
setup_percpu_segment(cpu);
+ setup_stack_canary_segment(cpu);
/*
* Copy data used in early init routines from the
* initial arrays to the per cpu data areas. These
# define FIX_EFLAGS __FIX_EFLAGS
#endif
-#define COPY(x) { \
- get_user_ex(regs->x, &sc->x); \
-}
+#define COPY(x) do { \
+ get_user_ex(regs->x, &sc->x); \
+} while (0)
-#define COPY_SEG(seg) { \
- unsigned short tmp; \
- get_user_ex(tmp, &sc->seg); \
- regs->seg = tmp; \
-}
+#define GET_SEG(seg) ({ \
+ unsigned short tmp; \
+ get_user_ex(tmp, &sc->seg); \
+ tmp; \
+})
-#define COPY_SEG_CPL3(seg) { \
- unsigned short tmp; \
- get_user_ex(tmp, &sc->seg); \
- regs->seg = tmp | 3; \
-}
+#define COPY_SEG(seg) do { \
+ regs->seg = GET_SEG(seg); \
+} while (0)
-#define GET_SEG(seg) { \
- unsigned short tmp; \
- get_user_ex(tmp, &sc->seg); \
- loadsegment(seg, tmp); \
-}
+#define COPY_SEG_CPL3(seg) do { \
+ regs->seg = GET_SEG(seg) | 3; \
+} while (0)
static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
get_user_try {
#ifdef CONFIG_X86_32
- GET_SEG(gs);
+ set_user_gs(regs, GET_SEG(gs));
COPY_SEG(fs);
COPY_SEG(es);
COPY_SEG(ds);
put_user_try {
#ifdef CONFIG_X86_32
- {
- unsigned int tmp;
-
- savesegment(gs, tmp);
- put_user_ex(tmp, (unsigned int __user *)&sc->gs);
- }
+ put_user_ex(get_user_gs(regs), (unsigned int __user *)&sc->gs);
put_user_ex(regs->fs, (unsigned int __user *)&sc->fs);
put_user_ex(regs->es, (unsigned int __user *)&sc->es);
put_user_ex(regs->ds, (unsigned int __user *)&sc->ds);
#endif /* CONFIG_X86_32 */
#ifdef CONFIG_X86_32
-asmlinkage int sys_sigaltstack(unsigned long bx)
+int sys_sigaltstack(struct pt_regs *regs)
{
- /*
- * This is needed to make gcc realize it doesn't own the
- * "struct pt_regs"
- */
- struct pt_regs *regs = (struct pt_regs *)&bx;
- const stack_t __user *uss = (const stack_t __user *)bx;
+ const stack_t __user *uss = (const stack_t __user *)regs->bx;
stack_t __user *uoss = (stack_t __user *)regs->cx;
return do_sigaltstack(uss, uoss, regs->sp);
* Do a signal return; undo the signal stack.
*/
#ifdef CONFIG_X86_32
-asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
+unsigned long sys_sigreturn(struct pt_regs *regs)
{
struct sigframe __user *frame;
- struct pt_regs *regs;
unsigned long ax;
sigset_t set;
- regs = (struct pt_regs *) &__unused;
frame = (struct sigframe __user *)(regs->sp - 8);
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
}
#endif /* CONFIG_X86_32 */
-static long do_rt_sigreturn(struct pt_regs *regs)
+long sys_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
unsigned long ax;
return 0;
}
-#ifdef CONFIG_X86_32
-/*
- * Note: do not pass in pt_regs directly as with tail-call optimization
- * GCC will incorrectly stomp on the caller's frame and corrupt user-space
- * register state:
- */
-asmlinkage int sys_rt_sigreturn(unsigned long __unused)
-{
- struct pt_regs *regs = (struct pt_regs *)&__unused;
-
- return do_rt_sigreturn(regs);
-}
-#else /* !CONFIG_X86_32 */
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
-{
- return do_rt_sigreturn(regs);
-}
-#endif /* CONFIG_X86_32 */
-
/*
* OK, we're invoking a handler:
*/
ENTRY(sys_call_table)
.long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */
.long sys_exit
- .long sys_fork
+ .long ptregs_fork
.long sys_read
.long sys_write
.long sys_open /* 5 */
.long sys_creat
.long sys_link
.long sys_unlink /* 10 */
- .long sys_execve
+ .long ptregs_execve
.long sys_chdir
.long sys_time
.long sys_mknod
.long sys_newlstat
.long sys_newfstat
.long sys_uname
- .long sys_iopl /* 110 */
+ .long ptregs_iopl /* 110 */
.long sys_vhangup
.long sys_ni_syscall /* old "idle" system call */
- .long sys_vm86old
+ .long ptregs_vm86old
.long sys_wait4
.long sys_swapoff /* 115 */
.long sys_sysinfo
.long sys_ipc
.long sys_fsync
- .long sys_sigreturn
- .long sys_clone /* 120 */
+ .long ptregs_sigreturn
+ .long ptregs_clone /* 120 */
.long sys_setdomainname
.long sys_newuname
.long sys_modify_ldt
.long sys_mremap
.long sys_setresuid16
.long sys_getresuid16 /* 165 */
- .long sys_vm86
+ .long ptregs_vm86
.long sys_ni_syscall /* Old sys_query_module */
.long sys_poll
.long sys_nfsservctl
.long sys_setresgid16 /* 170 */
.long sys_getresgid16
.long sys_prctl
- .long sys_rt_sigreturn
+ .long ptregs_rt_sigreturn
.long sys_rt_sigaction
.long sys_rt_sigprocmask /* 175 */
.long sys_rt_sigpending
.long sys_getcwd
.long sys_capget
.long sys_capset /* 185 */
- .long sys_sigaltstack
+ .long ptregs_sigaltstack
.long sys_sendfile
.long sys_ni_syscall /* reserved for streams1 */
.long sys_ni_syscall /* reserved for streams2 */
- .long sys_vfork /* 190 */
+ .long ptregs_vfork /* 190 */
.long sys_getrlimit
.long sys_mmap2
.long sys_truncate64
#include <asm/page.h>
#include <asm/msr.h>
#include <asm/segment.h>
+#include <asm/processor-flags.h>
.section .rodata, "a", @progbits
ENTRY(trampoline_data)
r_base = .
cli # We should be safe anyway
- wbinvd
+ wbinvd
mov %cs, %ax # Code and data in the same place
mov %ax, %ds
mov %ax, %es
lidtl tidt - r_base # load idt with 0, 0
lgdtl tgdt - r_base # load gdt with whatever is appropriate
- xor %ax, %ax
- inc %ax # protected mode (PE) bit
- lmsw %ax # into protected mode
+ mov $X86_CR0_PE, %ax # protected mode (PE) bit
+ lmsw %ax # into protected mode
# flush prefetch and jump to startup_32
ljmpl *(startup_32_vector - r_base)
movl $__KERNEL_DS, %eax # Initialize the %ds segment register
movl %eax, %ds
- xorl %eax, %eax
- btsl $5, %eax # Enable PAE mode
- movl %eax, %cr4
+ movl $X86_CR4_PAE, %eax
+ movl %eax, %cr4 # Enable PAE mode
# Setup trampoline 4 level pagetables
leal (trampoline_level4_pgt - r_base)(%esi), %eax
xorl %edx, %edx
wrmsr
- xorl %eax, %eax
- btsl $31, %eax # Enable paging and in turn activate Long Mode
- btsl $0, %eax # Enable protected mode
+ # Enable paging and in turn activate Long Mode
+ # Enable protected mode
+ movl $(X86_CR0_PG | X86_CR0_PE), %eax
movl %eax, %cr0
/*
local_irq_enable();
}
+static inline void conditional_cli(struct pt_regs *regs)
+{
+ if (regs->flags & X86_EFLAGS_IF)
+ local_irq_disable();
+}
+
static inline void preempt_conditional_cli(struct pt_regs *regs)
{
if (regs->flags & X86_EFLAGS_IF)
#ifdef CONFIG_X86_32
debug_vm86:
+ /* reenable preemption: handle_vm86_trap() might sleep */
+ dec_preempt_count();
handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
- preempt_conditional_cli(regs);
+ conditional_cli(regs);
return;
#endif
}
#endif /* CONFIG_MATH_EMULATION */
-dotraplinkage void __kprobes do_device_not_available(struct pt_regs regs)
+dotraplinkage void __kprobes
+do_device_not_available(struct pt_regs *regs, long error_code)
{
#ifdef CONFIG_X86_32
if (read_cr0() & X86_CR0_EM) {
struct math_emu_info info = { };
- conditional_sti(®s);
+ conditional_sti(regs);
- info.regs = ®s;
+ info.regs = regs;
math_emulate(&info);
} else {
math_state_restore(); /* interrupts still off */
- conditional_sti(®s);
+ conditional_sti(regs);
}
#else
math_state_restore();
ret = KVM86->regs32;
ret->fs = current->thread.saved_fs;
- loadsegment(gs, current->thread.saved_gs);
+ set_user_gs(ret, current->thread.saved_gs);
return ret;
}
static int do_vm86_irq_handling(int subfunction, int irqnumber);
static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk);
-asmlinkage int sys_vm86old(struct pt_regs regs)
+int sys_vm86old(struct pt_regs *regs)
{
- struct vm86_struct __user *v86 = (struct vm86_struct __user *)regs.bx;
+ struct vm86_struct __user *v86 = (struct vm86_struct __user *)regs->bx;
struct kernel_vm86_struct info; /* declare this _on top_,
* this avoids wasting of stack space.
* This remains on the stack until we
if (tmp)
goto out;
memset(&info.vm86plus, 0, (int)&info.regs32 - (int)&info.vm86plus);
- info.regs32 = ®s;
+ info.regs32 = regs;
tsk->thread.vm86_info = v86;
do_sys_vm86(&info, tsk);
ret = 0; /* we never return here */
}
-asmlinkage int sys_vm86(struct pt_regs regs)
+int sys_vm86(struct pt_regs *regs)
{
struct kernel_vm86_struct info; /* declare this _on top_,
* this avoids wasting of stack space.
struct vm86plus_struct __user *v86;
tsk = current;
- switch (regs.bx) {
+ switch (regs->bx) {
case VM86_REQUEST_IRQ:
case VM86_FREE_IRQ:
case VM86_GET_IRQ_BITS:
case VM86_GET_AND_RESET_IRQ:
- ret = do_vm86_irq_handling(regs.bx, (int)regs.cx);
+ ret = do_vm86_irq_handling(regs->bx, (int)regs->cx);
goto out;
case VM86_PLUS_INSTALL_CHECK:
/*
ret = -EPERM;
if (tsk->thread.saved_sp0)
goto out;
- v86 = (struct vm86plus_struct __user *)regs.cx;
+ v86 = (struct vm86plus_struct __user *)regs->cx;
tmp = copy_vm86_regs_from_user(&info.regs, &v86->regs,
offsetof(struct kernel_vm86_struct, regs32) -
sizeof(info.regs));
ret = -EFAULT;
if (tmp)
goto out;
- info.regs32 = ®s;
+ info.regs32 = regs;
info.vm86plus.is_vm86pus = 1;
tsk->thread.vm86_info = (struct vm86_struct __user *)v86;
do_sys_vm86(&info, tsk);
info->regs32->ax = 0;
tsk->thread.saved_sp0 = tsk->thread.sp0;
tsk->thread.saved_fs = info->regs32->fs;
- savesegment(gs, tsk->thread.saved_gs);
+ tsk->thread.saved_gs = get_user_gs(info->regs32);
tss = &per_cpu(init_tss, get_cpu());
tsk->thread.sp0 = (unsigned long) &info->VM86_TSS_ESP0;
DWARF_DEBUG
}
+ /*
+ * Per-cpu symbols which need to be offset from __per_cpu_load
+ * for the boot processor.
+ */
+#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
+INIT_PER_CPU(gdt_page);
+INIT_PER_CPU(irq_stack_union);
+
/*
* Build-time check on the image size:
*/
/* There's one problem which normal hardware doesn't have: the Host
* can't handle us removing entries we're currently using. So we clear
* the GS register here: if it's needed it'll be reloaded anyway. */
- loadsegment(gs, 0);
+ lazy_load_gs(0);
lazy_hcall(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu, 0);
}
int cpu = smp_processor_id();
switch_to_new_gdt(cpu);
- cpu_online_map = cpumask_of_cpu(smp_processor_id());
- cpu_callout_map = cpumask_of_cpu(smp_processor_id());
- cpu_callin_map = CPU_MASK_NONE;
- cpu_present_map = cpumask_of_cpu(smp_processor_id());
+ cpu_set(cpu, cpu_online_map);
+ cpu_set(cpu, cpu_callout_map);
+ cpu_set(cpu, cpu_possible_map);
+ cpu_set(cpu, cpu_present_map);
+
}
static int __cpuinit voyager_cpu_up(unsigned int cpu)
#endif /* PARANOID */
switch (segment) {
- /* gs isn't used by the kernel, so it still has its
- user-space value. */
case PREFIX_GS_ - 1:
- /* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */
- savesegment(gs, addr->selector);
+ /* user gs handling can be lazy, use special accessors */
+ addr->selector = get_user_gs(FPU_info->regs);
break;
default:
addr->selector = PM_REG_(segment);
return 0;
}
+static int fault_in_kernel_space(unsigned long address)
+{
+#ifdef CONFIG_X86_32
+ return address >= TASK_SIZE;
+#else /* !CONFIG_X86_32 */
+ return address >= TASK_SIZE64;
+#endif /* CONFIG_X86_32 */
+}
+
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* (error_code & 4) == 0, and that the fault was not a
* protection error (error_code & 9) == 0.
*/
-#ifdef CONFIG_X86_32
- if (unlikely(address >= TASK_SIZE)) {
-#else
- if (unlikely(address >= TASK_SIZE64)) {
-#endif
+ if (unlikely(fault_in_kernel_space(address))) {
if (!(error_code & (PF_RSVD|PF_USER|PF_PROT)) &&
vmalloc_fault(address) >= 0)
return;
return;
}
+ /* kprobes don't want to hook the spurious faults. */
if (unlikely(notify_page_fault(regs)))
return;
/*
return;
}
down_read(&mm->mmap_sem);
+ } else {
+ /*
+ * The above down_read_trylock() might have succeeded in which
+ * case we'll have missed the might_sleep() from down_read().
+ */
+ might_sleep();
}
vma = find_vma(mm, address);
}
early_param("highmem", parse_highmem);
+#define MSG_HIGHMEM_TOO_BIG \
+ "highmem size (%luMB) is bigger than pages available (%luMB)!\n"
+
+#define MSG_LOWMEM_TOO_SMALL \
+ "highmem size (%luMB) results in <64MB lowmem, ignoring it!\n"
/*
- * Determine low and high memory ranges:
+ * All of RAM fits into lowmem - but if user wants highmem
+ * artificially via the highmem=x boot parameter then create
+ * it:
*/
-void __init find_low_pfn_range(void)
+void __init lowmem_pfn_init(void)
{
- /* it could update max_pfn */
-
/* max_low_pfn is 0, we already have early_res support */
-
max_low_pfn = max_pfn;
- if (max_low_pfn > MAXMEM_PFN) {
- if (highmem_pages == -1)
- highmem_pages = max_pfn - MAXMEM_PFN;
- if (highmem_pages + MAXMEM_PFN < max_pfn)
- max_pfn = MAXMEM_PFN + highmem_pages;
- if (highmem_pages + MAXMEM_PFN > max_pfn) {
- printk(KERN_WARNING "only %luMB highmem pages "
- "available, ignoring highmem size of %uMB.\n",
- pages_to_mb(max_pfn - MAXMEM_PFN),
+
+ if (highmem_pages == -1)
+ highmem_pages = 0;
+#ifdef CONFIG_HIGHMEM
+ if (highmem_pages >= max_pfn) {
+ printk(KERN_ERR MSG_HIGHMEM_TOO_BIG,
+ pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
+ highmem_pages = 0;
+ }
+ if (highmem_pages) {
+ if (max_low_pfn - highmem_pages < 64*1024*1024/PAGE_SIZE) {
+ printk(KERN_ERR MSG_LOWMEM_TOO_SMALL,
pages_to_mb(highmem_pages));
highmem_pages = 0;
}
- max_low_pfn = MAXMEM_PFN;
+ max_low_pfn -= highmem_pages;
+ }
+#else
+ if (highmem_pages)
+ printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
+#endif
+}
+
+#define MSG_HIGHMEM_TOO_SMALL \
+ "only %luMB highmem pages available, ignoring highmem size of %luMB!\n"
+
+#define MSG_HIGHMEM_TRIMMED \
+ "Warning: only 4GB will be used. Use a HIGHMEM64G enabled kernel!\n"
+/*
+ * We have more RAM than fits into lowmem - we try to put it into
+ * highmem, also taking the highmem=x boot parameter into account:
+ */
+void __init highmem_pfn_init(void)
+{
+ max_low_pfn = MAXMEM_PFN;
+
+ if (highmem_pages == -1)
+ highmem_pages = max_pfn - MAXMEM_PFN;
+
+ if (highmem_pages + MAXMEM_PFN < max_pfn)
+ max_pfn = MAXMEM_PFN + highmem_pages;
+
+ if (highmem_pages + MAXMEM_PFN > max_pfn) {
+ printk(KERN_WARNING MSG_HIGHMEM_TOO_SMALL,
+ pages_to_mb(max_pfn - MAXMEM_PFN),
+ pages_to_mb(highmem_pages));
+ highmem_pages = 0;
+ }
#ifndef CONFIG_HIGHMEM
- /* Maximum memory usable is what is directly addressable */
- printk(KERN_WARNING "Warning only %ldMB will be used.\n",
- MAXMEM>>20);
- if (max_pfn > MAX_NONPAE_PFN)
- printk(KERN_WARNING
- "Use a HIGHMEM64G enabled kernel.\n");
- else
- printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
- max_pfn = MAXMEM_PFN;
+ /* Maximum memory usable is what is directly addressable */
+ printk(KERN_WARNING "Warning only %ldMB will be used.\n", MAXMEM>>20);
+ if (max_pfn > MAX_NONPAE_PFN)
+ printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
+ else
+ printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+ max_pfn = MAXMEM_PFN;
#else /* !CONFIG_HIGHMEM */
#ifndef CONFIG_HIGHMEM64G
- if (max_pfn > MAX_NONPAE_PFN) {
- max_pfn = MAX_NONPAE_PFN;
- printk(KERN_WARNING "Warning only 4GB will be used."
- "Use a HIGHMEM64G enabled kernel.\n");
- }
+ if (max_pfn > MAX_NONPAE_PFN) {
+ max_pfn = MAX_NONPAE_PFN;
+ printk(KERN_WARNING MSG_HIGHMEM_TRIMMED);
+ }
#endif /* !CONFIG_HIGHMEM64G */
#endif /* !CONFIG_HIGHMEM */
- } else {
- if (highmem_pages == -1)
- highmem_pages = 0;
-#ifdef CONFIG_HIGHMEM
- if (highmem_pages >= max_pfn) {
- printk(KERN_ERR "highmem size specified (%uMB) is "
- "bigger than pages available (%luMB)!.\n",
- pages_to_mb(highmem_pages),
- pages_to_mb(max_pfn));
- highmem_pages = 0;
- }
- if (highmem_pages) {
- if (max_low_pfn - highmem_pages <
- 64*1024*1024/PAGE_SIZE){
- printk(KERN_ERR "highmem size %uMB results in "
- "smaller than 64MB lowmem, ignoring it.\n"
- , pages_to_mb(highmem_pages));
- highmem_pages = 0;
- }
- max_low_pfn -= highmem_pages;
- }
-#else
- if (highmem_pages)
- printk(KERN_ERR "ignoring highmem size on non-highmem"
- " kernel!\n");
-#endif
- }
+}
+
+/*
+ * Determine low and high memory ranges:
+ */
+void __init find_low_pfn_range(void)
+{
+ /* it could update max_pfn */
+
+ if (max_pfn <= MAXMEM_PFN)
+ lowmem_pfn_init();
+ else
+ highmem_pfn_init();
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
return 0;
}
-int pagerange_is_ram(unsigned long start, unsigned long end)
-{
- int ram_page = 0, not_rampage = 0;
- unsigned long page_nr;
-
- for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
- ++page_nr) {
- if (page_is_ram(page_nr))
- ram_page = 1;
- else
- not_rampage = 1;
-
- if (ram_page == not_rampage)
- return -1;
- }
-
- return ram_page;
-}
-
/*
* Fix up the linear direct mapping of the kernel to avoid cache attribute
* conflicts.
}
#ifdef CONFIG_DEBUG_PER_CPU_MAPS
- if (cpu >= nr_cpu_ids || !per_cpu_offset(cpu)) {
+ if (cpu >= nr_cpu_ids || !cpu_possible(cpu)) {
printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu);
dump_stack();
return;
if (early_per_cpu_ptr(x86_cpu_to_node_map))
return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu];
- if (!per_cpu_offset(cpu)) {
+ if (!cpu_possible(cpu)) {
printk(KERN_WARNING
"early_cpu_to_node(%d): no per_cpu area!\n", cpu);
dump_stack();
address = cpa->vaddr[cpa->curpage];
else
address = *cpa->vaddr;
-
repeat:
kpte = lookup_address(address, &level);
if (!kpte)
vm_unmap_aliases();
+ /*
+ * If we're called with lazy mmu updates enabled, the
+ * in-memory pte state may be stale. Flush pending updates to
+ * bring them up to date.
+ */
+ arch_flush_lazy_mmu_mode();
+
cpa.vaddr = addr;
cpa.numpages = numpages;
cpa.mask_set = mask_set;
} else
cpa_flush_all(cache);
+ /*
+ * If we've been called with lazy mmu updates enabled, then
+ * make sure that everything gets flushed out before we
+ * return.
+ */
+ arch_flush_lazy_mmu_mode();
+
out:
return ret;
}
static struct memtype *cached_entry;
static u64 cached_start;
+static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
+{
+ int ram_page = 0, not_rampage = 0;
+ unsigned long page_nr;
+
+ for (page_nr = (start >> PAGE_SHIFT); page_nr < (end >> PAGE_SHIFT);
+ ++page_nr) {
+ /*
+ * For legacy reasons, physical address range in the legacy ISA
+ * region is tracked as non-RAM. This will allow users of
+ * /dev/mem to map portions of legacy ISA region, even when
+ * some of those portions are listed(or not even listed) with
+ * different e820 types(RAM/reserved/..)
+ */
+ if (page_nr >= (ISA_END_ADDRESS >> PAGE_SHIFT) &&
+ page_is_ram(page_nr))
+ ram_page = 1;
+ else
+ not_rampage = 1;
+
+ if (ram_page == not_rampage)
+ return -1;
+ }
+
+ return ram_page;
+}
+
/*
* For RAM pages, mark the pages as non WB memory type using
* PageNonWB (PG_arch_1). We allow only one set_memory_uc() or
if (new_type)
*new_type = actual_type;
- /*
- * For legacy reasons, some parts of the physical address range in the
- * legacy 1MB region is treated as non-RAM (even when listed as RAM in
- * the e820 tables). So we will track the memory attributes of this
- * legacy 1MB region using the linear memtype_list always.
- */
- if (end >= ISA_END_ADDRESS) {
- is_range_ram = pagerange_is_ram(start, end);
- if (is_range_ram == 1)
- return reserve_ram_pages_type(start, end, req_type,
- new_type);
- else if (is_range_ram < 0)
- return -EINVAL;
- }
+ is_range_ram = pat_pagerange_is_ram(start, end);
+ if (is_range_ram == 1)
+ return reserve_ram_pages_type(start, end, req_type,
+ new_type);
+ else if (is_range_ram < 0)
+ return -EINVAL;
new = kmalloc(sizeof(struct memtype), GFP_KERNEL);
if (!new)
if (is_ISA_range(start, end - 1))
return 0;
- /*
- * For legacy reasons, some parts of the physical address range in the
- * legacy 1MB region is treated as non-RAM (even when listed as RAM in
- * the e820 tables). So we will track the memory attributes of this
- * legacy 1MB region using the linear memtype_list always.
- */
- if (end >= ISA_END_ADDRESS) {
- is_range_ram = pagerange_is_ram(start, end);
- if (is_range_ram == 1)
- return free_ram_pages_type(start, end);
- else if (is_range_ram < 0)
- return -EINVAL;
- }
+ is_range_ram = pat_pagerange_is_ram(start, end);
+ if (is_range_ram == 1)
+ return free_ram_pages_type(start, end);
+ else if (is_range_ram < 0)
+ return -EINVAL;
spin_lock(&memtype_lock);
list_for_each_entry(entry, &memtype_list, nd) {
unsigned long flags;
unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
- is_ram = pagerange_is_ram(paddr, paddr + size);
+ is_ram = pat_pagerange_is_ram(paddr, paddr + size);
- if (is_ram != 0) {
- /*
- * For mapping RAM pages, drivers need to call
- * set_memory_[uc|wc|wb] directly, for reserve and free, before
- * setting up the PTE.
- */
- WARN_ON_ONCE(1);
- return 0;
- }
+ /*
+ * reserve_pfn_range() doesn't support RAM pages.
+ */
+ if (is_ram != 0)
+ return -EINVAL;
ret = reserve_memtype(paddr, paddr + size, want_flags, &flags);
if (ret)
{
int is_ram;
- is_ram = pagerange_is_ram(paddr, paddr + size);
+ is_ram = pat_pagerange_is_ram(paddr, paddr + size);
if (is_ram == 0)
free_memtype(paddr, paddr + size);
}
$(call if_changed,objcopy)
CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \
- $(filter -g%,$(KBUILD_CFLAGS))
+ $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector)
$(vobjs): KBUILD_CFLAGS += $(CFL)
static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
{
/*
- * XXX sleazy hack: If we're being called in a lazy-cpu zone,
- * it means we're in a context switch, and %gs has just been
- * saved. This means we can zero it out to prevent faults on
- * exit from the hypervisor if the next process has no %gs.
- * Either way, it has been saved, and the new value will get
- * loaded properly. This will go away as soon as Xen has been
- * modified to not save/restore %gs for normal hypercalls.
+ * XXX sleazy hack: If we're being called in a lazy-cpu zone
+ * and lazy gs handling is enabled, it means we're in a
+ * context switch, and %gs has just been saved. This means we
+ * can zero it out to prevent faults on exit from the
+ * hypervisor if the next process has no %gs. Either way, it
+ * has been saved, and the new value will get loaded properly.
+ * This will go away as soon as Xen has been modified to not
+ * save/restore %gs for normal hypercalls.
*
* On x86_64, this hack is not used for %gs, because gs points
* to KERNEL_GS_BASE (and uses it for PDA references), so we
*/
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
#ifdef CONFIG_X86_32
- loadsegment(gs, 0);
+ lazy_load_gs(0);
#else
loadsegment(fs, 0);
#endif
/* Remove us, and any offline CPUS. */
cpumask_and(to_cpumask(args->mask), cpus, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
- if (unlikely(cpumask_empty(to_cpumask(args->mask))))
- goto issue;
if (va == TLB_FLUSH_ALL) {
args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF);
-issue:
xen_mc_issue(PARAVIRT_LAZY_MMU);
}
struct multicall_entry entries[MC_BATCH];
#if MC_DEBUG
struct multicall_entry debug[MC_BATCH];
+ void *caller[MC_BATCH];
#endif
unsigned char args[MC_ARGS];
struct callback {
ret, smp_processor_id());
dump_stack();
for (i = 0; i < b->mcidx; i++) {
- printk(KERN_DEBUG " call %2d/%d: op=%lu arg=[%lx] result=%ld\n",
+ printk(KERN_DEBUG " call %2d/%d: op=%lu arg=[%lx] result=%ld\t%pF\n",
i+1, b->mcidx,
b->debug[i].op,
b->debug[i].args[0],
- b->entries[i].result);
+ b->entries[i].result,
+ b->caller[i]);
}
}
#endif
} else
BUG_ON(b->argidx != 0);
- local_irq_restore(flags);
-
for (i = 0; i < b->cbidx; i++) {
struct callback *cb = &b->callbacks[i];
}
b->cbidx = 0;
- BUG_ON(ret);
+ local_irq_restore(flags);
+
+ WARN_ON(ret);
}
struct multicall_space __xen_mc_entry(size_t args)
}
ret.mc = &b->entries[b->mcidx];
+#ifdef MC_DEBUG
+ b->caller[b->mcidx] = __builtin_return_address(0);
+#endif
b->mcidx++;
ret.args = &b->args[argidx];
b->argidx = argidx + args;
/*
- Asm versions of Xen pv-ops, suitable for either direct use or inlining.
- The inline versions are the same as the direct-use versions, with the
- pre- and post-amble chopped off.
-
- This code is encoded for size rather than absolute efficiency,
- with a view to being able to inline as much as possible.
-
- We only bother with direct forms (ie, vcpu in percpu data) of
- the operations here; the indirect forms are better handled in
- C, since they're generally too large to inline anyway.
+ * Asm versions of Xen pv-ops, suitable for either direct use or
+ * inlining. The inline versions are the same as the direct-use
+ * versions, with the pre- and post-amble chopped off.
+ *
+ * This code is encoded for size rather than absolute efficiency, with
+ * a view to being able to inline as much as possible.
+ *
+ * We only bother with direct forms (ie, vcpu in percpu data) of the
+ * operations here; the indirect forms are better handled in C, since
+ * they're generally too large to inline anyway.
*/
#include <asm/asm-offsets.h>
#include "xen-asm.h"
/*
- Enable events. This clears the event mask and tests the pending
- event status with one and operation. If there are pending
- events, then enter the hypervisor to get them handled.
+ * Enable events. This clears the event mask and tests the pending
+ * event status with one and operation. If there are pending events,
+ * then enter the hypervisor to get them handled.
*/
ENTRY(xen_irq_enable_direct)
/* Unmask events */
movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
- /* Preempt here doesn't matter because that will deal with
- any pending interrupts. The pending check may end up being
- run on the wrong CPU, but that doesn't hurt. */
+ /*
+ * Preempt here doesn't matter because that will deal with any
+ * pending interrupts. The pending check may end up being run
+ * on the wrong CPU, but that doesn't hurt.
+ */
/* Test for pending */
testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
/*
- Disabling events is simply a matter of making the event mask
- non-zero.
+ * Disabling events is simply a matter of making the event mask
+ * non-zero.
*/
ENTRY(xen_irq_disable_direct)
movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
RELOC(xen_irq_disable_direct, 0)
/*
- (xen_)save_fl is used to get the current interrupt enable status.
- Callers expect the status to be in X86_EFLAGS_IF, and other bits
- may be set in the return value. We take advantage of this by
- making sure that X86_EFLAGS_IF has the right value (and other bits
- in that byte are 0), but other bits in the return value are
- undefined. We need to toggle the state of the bit, because
- Xen and x86 use opposite senses (mask vs enable).
+ * (xen_)save_fl is used to get the current interrupt enable status.
+ * Callers expect the status to be in X86_EFLAGS_IF, and other bits
+ * may be set in the return value. We take advantage of this by
+ * making sure that X86_EFLAGS_IF has the right value (and other bits
+ * in that byte are 0), but other bits in the return value are
+ * undefined. We need to toggle the state of the bit, because Xen and
+ * x86 use opposite senses (mask vs enable).
*/
ENTRY(xen_save_fl_direct)
testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
setz %ah
- addb %ah,%ah
+ addb %ah, %ah
ENDPATCH(xen_save_fl_direct)
ret
ENDPROC(xen_save_fl_direct)
/*
- In principle the caller should be passing us a value return
- from xen_save_fl_direct, but for robustness sake we test only
- the X86_EFLAGS_IF flag rather than the whole byte. After
- setting the interrupt mask state, it checks for unmasked
- pending events and enters the hypervisor to get them delivered
- if so.
+ * In principle the caller should be passing us a value return from
+ * xen_save_fl_direct, but for robustness sake we test only the
+ * X86_EFLAGS_IF flag rather than the whole byte. After setting the
+ * interrupt mask state, it checks for unmasked pending events and
+ * enters the hypervisor to get them delivered if so.
*/
ENTRY(xen_restore_fl_direct)
#ifdef CONFIG_X86_64
testb $X86_EFLAGS_IF>>8, %ah
#endif
setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
- /* Preempt here doesn't matter because that will deal with
- any pending interrupts. The pending check may end up being
- run on the wrong CPU, but that doesn't hurt. */
+ /*
+ * Preempt here doesn't matter because that will deal with any
+ * pending interrupts. The pending check may end up being run
+ * on the wrong CPU, but that doesn't hurt.
+ */
/* check for unmasked and pending */
cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
/*
- Force an event check by making a hypercall,
- but preserve regs before making the call.
+ * Force an event check by making a hypercall, but preserve regs
+ * before making the call.
*/
check_events:
#ifdef CONFIG_X86_32
pop %rax
#endif
ret
-
/*
- Asm versions of Xen pv-ops, suitable for either direct use or inlining.
- The inline versions are the same as the direct-use versions, with the
- pre- and post-amble chopped off.
-
- This code is encoded for size rather than absolute efficiency,
- with a view to being able to inline as much as possible.
-
- We only bother with direct forms (ie, vcpu in pda) of the operations
- here; the indirect forms are better handled in C, since they're
- generally too large to inline anyway.
+ * Asm versions of Xen pv-ops, suitable for either direct use or
+ * inlining. The inline versions are the same as the direct-use
+ * versions, with the pre- and post-amble chopped off.
+ *
+ * This code is encoded for size rather than absolute efficiency, with
+ * a view to being able to inline as much as possible.
+ *
+ * We only bother with direct forms (ie, vcpu in pda) of the
+ * operations here; the indirect forms are better handled in C, since
+ * they're generally too large to inline anyway.
*/
-//#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
#include <asm/segment.h>
#include "xen-asm.h"
/*
- Force an event check by making a hypercall,
- but preserve regs before making the call.
+ * Force an event check by making a hypercall, but preserve regs
+ * before making the call.
*/
check_events:
push %eax
ret
/*
- We can't use sysexit directly, because we're not running in ring0.
- But we can easily fake it up using iret. Assuming xen_sysexit
- is jumped to with a standard stack frame, we can just strip it
- back to a standard iret frame and use iret.
+ * We can't use sysexit directly, because we're not running in ring0.
+ * But we can easily fake it up using iret. Assuming xen_sysexit is
+ * jumped to with a standard stack frame, we can just strip it back to
+ * a standard iret frame and use iret.
*/
ENTRY(xen_sysexit)
movl PT_EAX(%esp), %eax /* Shouldn't be necessary? */
ENDPROC(xen_sysexit)
/*
- This is run where a normal iret would be run, with the same stack setup:
- 8: eflags
- 4: cs
- esp-> 0: eip
-
- This attempts to make sure that any pending events are dealt
- with on return to usermode, but there is a small window in
- which an event can happen just before entering usermode. If
- the nested interrupt ends up setting one of the TIF_WORK_MASK
- pending work flags, they will not be tested again before
- returning to usermode. This means that a process can end up
- with pending work, which will be unprocessed until the process
- enters and leaves the kernel again, which could be an
- unbounded amount of time. This means that a pending signal or
- reschedule event could be indefinitely delayed.
-
- The fix is to notice a nested interrupt in the critical
- window, and if one occurs, then fold the nested interrupt into
- the current interrupt stack frame, and re-process it
- iteratively rather than recursively. This means that it will
- exit via the normal path, and all pending work will be dealt
- with appropriately.
-
- Because the nested interrupt handler needs to deal with the
- current stack state in whatever form its in, we keep things
- simple by only using a single register which is pushed/popped
- on the stack.
+ * This is run where a normal iret would be run, with the same stack setup:
+ * 8: eflags
+ * 4: cs
+ * esp-> 0: eip
+ *
+ * This attempts to make sure that any pending events are dealt with
+ * on return to usermode, but there is a small window in which an
+ * event can happen just before entering usermode. If the nested
+ * interrupt ends up setting one of the TIF_WORK_MASK pending work
+ * flags, they will not be tested again before returning to
+ * usermode. This means that a process can end up with pending work,
+ * which will be unprocessed until the process enters and leaves the
+ * kernel again, which could be an unbounded amount of time. This
+ * means that a pending signal or reschedule event could be
+ * indefinitely delayed.
+ *
+ * The fix is to notice a nested interrupt in the critical window, and
+ * if one occurs, then fold the nested interrupt into the current
+ * interrupt stack frame, and re-process it iteratively rather than
+ * recursively. This means that it will exit via the normal path, and
+ * all pending work will be dealt with appropriately.
+ *
+ * Because the nested interrupt handler needs to deal with the current
+ * stack state in whatever form its in, we keep things simple by only
+ * using a single register which is pushed/popped on the stack.
*/
ENTRY(xen_iret)
/* test eflags for special cases */
push %eax
ESP_OFFSET=4 # bytes pushed onto stack
- /* Store vcpu_info pointer for easy access. Do it this
- way to avoid having to reload %fs */
+ /*
+ * Store vcpu_info pointer for easy access. Do it this way to
+ * avoid having to reload %fs
+ */
#ifdef CONFIG_SMP
GET_THREAD_INFO(%eax)
- movl TI_cpu(%eax),%eax
- movl __per_cpu_offset(,%eax,4),%eax
- mov per_cpu__xen_vcpu(%eax),%eax
+ movl TI_cpu(%eax), %eax
+ movl __per_cpu_offset(,%eax,4), %eax
+ mov per_cpu__xen_vcpu(%eax), %eax
#else
movl per_cpu__xen_vcpu, %eax
#endif
/* check IF state we're restoring */
testb $X86_EFLAGS_IF>>8, 8+1+ESP_OFFSET(%esp)
- /* Maybe enable events. Once this happens we could get a
- recursive event, so the critical region starts immediately
- afterwards. However, if that happens we don't end up
- resuming the code, so we don't have to be worried about
- being preempted to another CPU. */
+ /*
+ * Maybe enable events. Once this happens we could get a
+ * recursive event, so the critical region starts immediately
+ * afterwards. However, if that happens we don't end up
+ * resuming the code, so we don't have to be worried about
+ * being preempted to another CPU.
+ */
setz XEN_vcpu_info_mask(%eax)
xen_iret_start_crit:
/* check for unmasked and pending */
cmpw $0x0001, XEN_vcpu_info_pending(%eax)
- /* If there's something pending, mask events again so we
- can jump back into xen_hypervisor_callback */
+ /*
+ * If there's something pending, mask events again so we can
+ * jump back into xen_hypervisor_callback
+ */
sete XEN_vcpu_info_mask(%eax)
popl %eax
- /* From this point on the registers are restored and the stack
- updated, so we don't need to worry about it if we're preempted */
+ /*
+ * From this point on the registers are restored and the stack
+ * updated, so we don't need to worry about it if we're
+ * preempted
+ */
iret_restore_end:
- /* Jump to hypervisor_callback after fixing up the stack.
- Events are masked, so jumping out of the critical
- region is OK. */
+ /*
+ * Jump to hypervisor_callback after fixing up the stack.
+ * Events are masked, so jumping out of the critical region is
+ * OK.
+ */
je xen_hypervisor_callback
1: iret
xen_iret_end_crit:
-.section __ex_table,"a"
+.section __ex_table, "a"
.align 4
- .long 1b,iret_exc
+ .long 1b, iret_exc
.previous
hyper_iret:
.globl xen_iret_start_crit, xen_iret_end_crit
/*
- This is called by xen_hypervisor_callback in entry.S when it sees
- that the EIP at the time of interrupt was between xen_iret_start_crit
- and xen_iret_end_crit. We're passed the EIP in %eax so we can do
- a more refined determination of what to do.
-
- The stack format at this point is:
- ----------------
- ss : (ss/esp may be present if we came from usermode)
- esp :
- eflags } outer exception info
- cs }
- eip }
- ---------------- <- edi (copy dest)
- eax : outer eax if it hasn't been restored
- ----------------
- eflags } nested exception info
- cs } (no ss/esp because we're nested
- eip } from the same ring)
- orig_eax }<- esi (copy src)
- - - - - - - - -
- fs }
- es }
- ds } SAVE_ALL state
- eax }
- : :
- ebx }<- esp
- ----------------
-
- In order to deliver the nested exception properly, we need to shift
- everything from the return addr up to the error code so it
- sits just under the outer exception info. This means that when we
- handle the exception, we do it in the context of the outer exception
- rather than starting a new one.
-
- The only caveat is that if the outer eax hasn't been
- restored yet (ie, it's still on stack), we need to insert
- its value into the SAVE_ALL state before going on, since
- it's usermode state which we eventually need to restore.
+ * This is called by xen_hypervisor_callback in entry.S when it sees
+ * that the EIP at the time of interrupt was between
+ * xen_iret_start_crit and xen_iret_end_crit. We're passed the EIP in
+ * %eax so we can do a more refined determination of what to do.
+ *
+ * The stack format at this point is:
+ * ----------------
+ * ss : (ss/esp may be present if we came from usermode)
+ * esp :
+ * eflags } outer exception info
+ * cs }
+ * eip }
+ * ---------------- <- edi (copy dest)
+ * eax : outer eax if it hasn't been restored
+ * ----------------
+ * eflags } nested exception info
+ * cs } (no ss/esp because we're nested
+ * eip } from the same ring)
+ * orig_eax }<- esi (copy src)
+ * - - - - - - - -
+ * fs }
+ * es }
+ * ds } SAVE_ALL state
+ * eax }
+ * : :
+ * ebx }<- esp
+ * ----------------
+ *
+ * In order to deliver the nested exception properly, we need to shift
+ * everything from the return addr up to the error code so it sits
+ * just under the outer exception info. This means that when we
+ * handle the exception, we do it in the context of the outer
+ * exception rather than starting a new one.
+ *
+ * The only caveat is that if the outer eax hasn't been restored yet
+ * (ie, it's still on stack), we need to insert its value into the
+ * SAVE_ALL state before going on, since it's usermode state which we
+ * eventually need to restore.
*/
ENTRY(xen_iret_crit_fixup)
/*
- Paranoia: Make sure we're really coming from kernel space.
- One could imagine a case where userspace jumps into the
- critical range address, but just before the CPU delivers a GP,
- it decides to deliver an interrupt instead. Unlikely?
- Definitely. Easy to avoid? Yes. The Intel documents
- explicitly say that the reported EIP for a bad jump is the
- jump instruction itself, not the destination, but some virtual
- environments get this wrong.
+ * Paranoia: Make sure we're really coming from kernel space.
+ * One could imagine a case where userspace jumps into the
+ * critical range address, but just before the CPU delivers a
+ * GP, it decides to deliver an interrupt instead. Unlikely?
+ * Definitely. Easy to avoid? Yes. The Intel documents
+ * explicitly say that the reported EIP for a bad jump is the
+ * jump instruction itself, not the destination, but some
+ * virtual environments get this wrong.
*/
movl PT_CS(%esp), %ecx
andl $SEGMENT_RPL_MASK, %ecx
lea PT_ORIG_EAX(%esp), %esi
lea PT_EFLAGS(%esp), %edi
- /* If eip is before iret_restore_end then stack
- hasn't been restored yet. */
+ /*
+ * If eip is before iret_restore_end then stack
+ * hasn't been restored yet.
+ */
cmp $iret_restore_end, %eax
jae 1f
- movl 0+4(%edi),%eax /* copy EAX (just above top of frame) */
+ movl 0+4(%edi), %eax /* copy EAX (just above top of frame) */
movl %eax, PT_EAX(%esp)
- lea ESP_OFFSET(%edi),%edi /* move dest up over saved regs */
+ lea ESP_OFFSET(%edi), %edi /* move dest up over saved regs */
/* set up the copy */
1: std
rep movsl
cld
- lea 4(%edi),%esp /* point esp to new frame */
+ lea 4(%edi), %esp /* point esp to new frame */
2: jmp xen_do_upcall
/*
- Asm versions of Xen pv-ops, suitable for either direct use or inlining.
- The inline versions are the same as the direct-use versions, with the
- pre- and post-amble chopped off.
-
- This code is encoded for size rather than absolute efficiency,
- with a view to being able to inline as much as possible.
-
- We only bother with direct forms (ie, vcpu in pda) of the operations
- here; the indirect forms are better handled in C, since they're
- generally too large to inline anyway.
+ * Asm versions of Xen pv-ops, suitable for either direct use or
+ * inlining. The inline versions are the same as the direct-use
+ * versions, with the pre- and post-amble chopped off.
+ *
+ * This code is encoded for size rather than absolute efficiency, with
+ * a view to being able to inline as much as possible.
+ *
+ * We only bother with direct forms (ie, vcpu in pda) of the
+ * operations here; the indirect forms are better handled in C, since
+ * they're generally too large to inline anyway.
*/
#include <asm/errno.h>
#include "xen-asm.h"
ENTRY(xen_adjust_exception_frame)
- mov 8+0(%rsp),%rcx
- mov 8+8(%rsp),%r11
+ mov 8+0(%rsp), %rcx
+ mov 8+8(%rsp), %r11
ret $16
hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
/*
- Xen64 iret frame:
-
- ss
- rsp
- rflags
- cs
- rip <-- standard iret frame
-
- flags
-
- rcx }
- r11 }<-- pushed by hypercall page
-rsp -> rax }
+ * Xen64 iret frame:
+ *
+ * ss
+ * rsp
+ * rflags
+ * cs
+ * rip <-- standard iret frame
+ *
+ * flags
+ *
+ * rcx }
+ * r11 }<-- pushed by hypercall page
+ * rsp->rax }
*/
ENTRY(xen_iret)
pushq $0
RELOC(xen_iret, 1b+1)
/*
- sysexit is not used for 64-bit processes, so it's
- only ever used to return to 32-bit compat userspace.
+ * sysexit is not used for 64-bit processes, so it's only ever used to
+ * return to 32-bit compat userspace.
*/
ENTRY(xen_sysexit)
pushq $__USER32_DS
RELOC(xen_sysexit, 1b+1)
ENTRY(xen_sysret64)
- /* We're already on the usermode stack at this point, but still
- with the kernel gs, so we can easily switch back */
+ /*
+ * We're already on the usermode stack at this point, but
+ * still with the kernel gs, so we can easily switch back
+ */
movq %rsp, PER_CPU_VAR(old_rsp)
- movq PER_CPU_VAR(kernel_stack),%rsp
+ movq PER_CPU_VAR(kernel_stack), %rsp
pushq $__USER_DS
pushq PER_CPU_VAR(old_rsp)
RELOC(xen_sysret64, 1b+1)
ENTRY(xen_sysret32)
- /* We're already on the usermode stack at this point, but still
- with the kernel gs, so we can easily switch back */
+ /*
+ * We're already on the usermode stack at this point, but
+ * still with the kernel gs, so we can easily switch back
+ */
movq %rsp, PER_CPU_VAR(old_rsp)
movq PER_CPU_VAR(kernel_stack), %rsp
RELOC(xen_sysret32, 1b+1)
/*
- Xen handles syscall callbacks much like ordinary exceptions,
- which means we have:
- - kernel gs
- - kernel rsp
- - an iret-like stack frame on the stack (including rcx and r11):
- ss
- rsp
- rflags
- cs
- rip
- r11
- rsp-> rcx
-
- In all the entrypoints, we undo all that to make it look
- like a CPU-generated syscall/sysenter and jump to the normal
- entrypoint.
+ * Xen handles syscall callbacks much like ordinary exceptions, which
+ * means we have:
+ * - kernel gs
+ * - kernel rsp
+ * - an iret-like stack frame on the stack (including rcx and r11):
+ * ss
+ * rsp
+ * rflags
+ * cs
+ * rip
+ * r11
+ * rsp->rcx
+ *
+ * In all the entrypoints, we undo all that to make it look like a
+ * CPU-generated syscall/sysenter and jump to the normal entrypoint.
*/
.macro undo_xen_syscall
- mov 0*8(%rsp),%rcx
- mov 1*8(%rsp),%r11
- mov 5*8(%rsp),%rsp
+ mov 0*8(%rsp), %rcx
+ mov 1*8(%rsp), %r11
+ mov 5*8(%rsp), %rsp
.endm
/* Normal 64-bit system call target */
ENTRY(xen_syscall32_target)
ENTRY(xen_sysenter_target)
- lea 16(%rsp), %rsp /* strip %rcx,%r11 */
+ lea 16(%rsp), %rsp /* strip %rcx, %r11 */
mov $-ENOSYS, %rax
pushq $VGCF_in_syscall
jmp hypercall_iret
#ifndef _XTENSA_SWAB_H
#define _XTENSA_SWAB_H
-#include <asm/types.h>
+#include <linux/types.h>
#include <linux/compiler.h>
#define __SWAB_64_THRU_32__
/*******************************************************************************
*
- * FUNCTION: acpi_get_table
+ * FUNCTION: acpi_get_table_with_size
*
* PARAMETERS: Signature - ACPI signature of needed table
* Instance - Which instance (for SSDTs)
*
*****************************************************************************/
acpi_status
-acpi_get_table(char *signature,
- u32 instance, struct acpi_table_header **out_table)
+acpi_get_table_with_size(char *signature,
+ u32 instance, struct acpi_table_header **out_table,
+ acpi_size *tbl_size)
{
u32 i;
u32 j;
acpi_tb_verify_table(&acpi_gbl_root_table_list.tables[i]);
if (ACPI_SUCCESS(status)) {
*out_table = acpi_gbl_root_table_list.tables[i].pointer;
+ *tbl_size = acpi_gbl_root_table_list.tables[i].length;
}
if (!acpi_gbl_permanent_mmap) {
return (AE_NOT_FOUND);
}
+acpi_status
+acpi_get_table(char *signature,
+ u32 instance, struct acpi_table_header **out_table)
+{
+ acpi_size tbl_size;
+
+ return acpi_get_table_with_size(signature,
+ instance, out_table, &tbl_size);
+}
ACPI_EXPORT_SYMBOL(acpi_get_table)
/*******************************************************************************
void acpi_os_unmap_memory(void __iomem * virt, acpi_size size)
{
- if (acpi_gbl_permanent_mmap) {
+ if (acpi_gbl_permanent_mmap)
iounmap(virt);
- }
+ else
+ __acpi_unmap_table(virt, size);
}
EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
+void early_acpi_os_unmap_memory(void __iomem * virt, acpi_size size)
+{
+ if (!acpi_gbl_permanent_mmap)
+ __acpi_unmap_table(virt, size);
+}
+
#ifdef ACPI_FUTURE_USAGE
acpi_status
acpi_os_get_physical_address(void *virt, acpi_physical_address * phys)
struct acpi_subtable_header *entry;
unsigned int count = 0;
unsigned long table_end;
+ acpi_size tbl_size;
if (!handler)
return -EINVAL;
if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
- acpi_get_table(id, acpi_apic_instance, &table_header);
+ acpi_get_table_with_size(id, acpi_apic_instance, &table_header, &tbl_size);
else
- acpi_get_table(id, 0, &table_header);
+ acpi_get_table_with_size(id, 0, &table_header, &tbl_size);
if (!table_header) {
printk(KERN_WARNING PREFIX "%4.4s not present\n", id);
table_end) {
if (entry->type == entry_id
&& (!max_entries || count++ < max_entries))
- if (handler(entry, table_end))
+ if (handler(entry, table_end)) {
+ early_acpi_os_unmap_memory((char *)table_header, tbl_size);
return -EINVAL;
+ }
entry = (struct acpi_subtable_header *)
((unsigned long)entry + entry->length);
"%i found\n", id, entry_id, count - max_entries, count);
}
+ early_acpi_os_unmap_memory((char *)table_header, tbl_size);
return count;
}
int __init acpi_table_parse(char *id, acpi_table_handler handler)
{
struct acpi_table_header *table = NULL;
+ acpi_size tbl_size;
if (!handler)
return -EINVAL;
if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
- acpi_get_table(id, acpi_apic_instance, &table);
+ acpi_get_table_with_size(id, acpi_apic_instance, &table, &tbl_size);
else
- acpi_get_table(id, 0, &table);
+ acpi_get_table_with_size(id, 0, &table, &tbl_size);
if (table) {
handler(table);
+ early_acpi_os_unmap_memory(table, tbl_size);
return 0;
} else
return 1;
static void __init check_multiple_madt(void)
{
struct acpi_table_header *table = NULL;
+ acpi_size tbl_size;
- acpi_get_table(ACPI_SIG_MADT, 2, &table);
+ acpi_get_table_with_size(ACPI_SIG_MADT, 2, &table, &tbl_size);
if (table) {
printk(KERN_WARNING PREFIX
"BIOS bug: multiple APIC/MADT found,"
"If \"acpi_apic_instance=%d\" works better, "
"notify linux-acpi@vger.kernel.org\n",
acpi_apic_instance ? 0 : 2);
+ early_acpi_os_unmap_memory(table, tbl_size);
} else
acpi_apic_instance = 0;
return -ENOMEM;
if (ibft_addr) {
- printk(KERN_INFO "iBFT detected at 0x%lx.\n",
- virt_to_phys((void *)ibft_addr));
+ printk(KERN_INFO "iBFT detected at 0x%llx.\n",
+ (u64)virt_to_phys((void *)ibft_addr));
rc = ibft_check_device();
if (rc)
*start = &buf[offset];
*eof = 0;
- DRM_PROC_PRINT("vma use count: %d, high_memory = %p, 0x%08lx\n",
+ DRM_PROC_PRINT("vma use count: %d, high_memory = %p, 0x%llx\n",
atomic_read(&dev->vma_count),
- high_memory, virt_to_phys(high_memory));
+ high_memory, (u64)virt_to_phys(high_memory));
list_for_each_entry(pt, &dev->vmalist, head) {
if (!(vma = pt->vma))
continue;
#ifndef __GRU_H__
#define __GRU_H__
-#include <asm/uv/uv.h>
-
/*
* GRU architectural definitions
*/
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/uaccess.h>
+#include <asm/uv/uv.h>
#include "gru.h"
#include "grulib.h"
#include "grutables.h"
-#if defined CONFIG_X86_64
-#include <asm/genapic.h>
-#include <asm/irq.h>
-#define IS_UV() is_uv_system()
-#elif defined CONFIG_IA64
-#include <asm/system.h>
-#include <asm/sn/simulator.h>
-/* temp support for running on hardware simulator */
-#define IS_UV() IS_MEDUSA() || ia64_platform_is("uv")
-#else
-#define IS_UV() 0
-#endif
-
#include <asm/uv/uv_hub.h>
#include <asm/uv/uv_mmrs.h>
char id[10];
void *gru_start_vaddr;
- if (!IS_UV())
+ if (!is_uv_system())
return 0;
#if defined CONFIG_IA64
int order = get_order(sizeof(struct gru_state) *
GRU_CHIPLETS_PER_BLADE);
- if (!IS_UV())
+ if (!is_uv_system())
return;
for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
#include <linux/mutex.h>
+#if defined CONFIG_X86_UV || defined CONFIG_IA64_SGI_UV
#include <asm/uv/uv.h>
+#define is_uv() is_uv_system()
+#endif
+
+#ifndef is_uv
+#define is_uv() 0
+#endif
-#ifdef CONFIG_IA64
+#if defined CONFIG_IA64
#include <asm/system.h>
#include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */
#define is_shub() ia64_platform_is("sn2")
-#ifdef CONFIG_IA64_SGI_UV
-#define is_uv() ia64_platform_is("uv")
-#else
-#define is_uv() 0
-#endif
-#endif
-#ifdef CONFIG_X86_64
-#include <asm/genapic.h>
-#define is_uv() is_uv_system()
#endif
#ifndef is_shub1
#define is_shub() 0
#endif
-#ifndef is_uv
-#define is_uv() 0
-#endif
-
#ifdef USE_DBUG_ON
#define DBUG_ON(condition) BUG_ON(condition)
#else
if (phys_mem < virt_to_phys(high_memory)) {
printk(KERN_CRIT "ne3210.c: Card RAM overlaps with normal memory!!!\n");
printk(KERN_CRIT "ne3210.c: Use EISA SCU to set card memory below 1MB,\n");
- printk(KERN_CRIT "ne3210.c: or to an address above 0x%lx.\n", virt_to_phys(high_memory));
+ printk(KERN_CRIT "ne3210.c: or to an address above 0x%llx.\n",
+ (u64)virt_to_phys(high_memory));
printk(KERN_CRIT "ne3210.c: Driver NOT installed.\n");
retval = -EINVAL;
goto out3;
nic_data->next_buffer_table += buffer->entries;
EFX_LOG(efx, "allocating special buffers %d-%d at %llx+%x "
- "(virt %p phys %lx)\n", buffer->index,
+ "(virt %p phys %llx)\n", buffer->index,
buffer->index + buffer->entries - 1,
- (unsigned long long)buffer->dma_addr, len,
- buffer->addr, virt_to_phys(buffer->addr));
+ (u64)buffer->dma_addr, len,
+ buffer->addr, (u64)virt_to_phys(buffer->addr));
return 0;
}
return;
EFX_LOG(efx, "deallocating special buffers %d-%d at %llx+%x "
- "(virt %p phys %lx)\n", buffer->index,
+ "(virt %p phys %llx)\n", buffer->index,
buffer->index + buffer->entries - 1,
- (unsigned long long)buffer->dma_addr, buffer->len,
- buffer->addr, virt_to_phys(buffer->addr));
+ (u64)buffer->dma_addr, buffer->len,
+ buffer->addr, (u64)virt_to_phys(buffer->addr));
pci_free_consistent(efx->pci_dev, buffer->len, buffer->addr,
buffer->dma_addr);
FALCON_MAC_STATS_SIZE);
if (rc)
return rc;
- EFX_LOG(efx, "stats buffer at %llx (virt %p phys %lx)\n",
- (unsigned long long)efx->stats_buffer.dma_addr,
+ EFX_LOG(efx, "stats buffer at %llx (virt %p phys %llx)\n",
+ (u64)efx->stats_buffer.dma_addr,
efx->stats_buffer.addr,
- virt_to_phys(efx->stats_buffer.addr));
+ (u64)virt_to_phys(efx->stats_buffer.addr));
return 0;
}
goto fail4;
BUG_ON(efx->irq_status.dma_addr & 0x0f);
- EFX_LOG(efx, "INT_KER at %llx (virt %p phys %lx)\n",
- (unsigned long long)efx->irq_status.dma_addr,
- efx->irq_status.addr, virt_to_phys(efx->irq_status.addr));
+ EFX_LOG(efx, "INT_KER at %llx (virt %p phys %llx)\n",
+ (u64)efx->irq_status.dma_addr,
+ efx->irq_status.addr, (u64)virt_to_phys(efx->irq_status.addr));
falcon_probe_spi_devices(efx);
if (arlan_check_fingerprint(memaddr))
return -ENODEV;
- printk(KERN_NOTICE "%s: Arlan found at %x, \n ", dev->name,
- (int) virt_to_phys((void*)memaddr));
+ printk(KERN_NOTICE "%s: Arlan found at %llx, \n ", dev->name,
+ (u64) virt_to_phys((void*)memaddr));
ap->card = (void *) memaddr;
dev->mem_start = memaddr;
LIST_HEAD(dmar_drhd_units);
static struct acpi_table_header * __initdata dmar_tbl;
+static acpi_size dmar_tbl_size;
static void __init dmar_register_drhd_unit(struct dmar_drhd_unit *drhd)
{
acpi_status status = AE_OK;
/* if we could find DMAR table, then there are DMAR devices */
- status = acpi_get_table(ACPI_SIG_DMAR, 0,
- (struct acpi_table_header **)&dmar_tbl);
+ status = acpi_get_table_with_size(ACPI_SIG_DMAR, 0,
+ (struct acpi_table_header **)&dmar_tbl,
+ &dmar_tbl_size);
if (ACPI_SUCCESS(status) && !dmar_tbl) {
printk (KERN_WARNING PREFIX "Unable to map DMAR\n");
iommu_detected = 1;
#endif
}
+ early_acpi_os_unmap_memory(dmar_tbl, dmar_tbl_size);
dmar_tbl = NULL;
}
acpi_size length);
void acpi_os_unmap_memory(void __iomem * logical_address, acpi_size size);
+void early_acpi_os_unmap_memory(void __iomem * virt, acpi_size size);
#ifdef ACPI_FUTURE_USAGE
acpi_status
struct acpi_table_header *out_table_header);
acpi_status
+acpi_get_table_with_size(acpi_string signature,
+ u32 instance, struct acpi_table_header **out_table,
+ acpi_size *tbl_size);
+acpi_status
acpi_get_table(acpi_string signature,
u32 instance, struct acpi_table_header **out_table);
#ifndef _ASM_SWAB_H
#define _ASM_SWAB_H
-#include <asm/types.h>
+#include <linux/types.h>
#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __SWAB_64_THRU_32__
#ifndef _ASM_M32R_SWAB_H
#define _ASM_M32R_SWAB_H
-#include <asm/types.h>
+#include <linux/types.h>
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __SWAB_64_THRU_32__
#ifndef _ASM_SWAB_H
#define _ASM_SWAB_H
-#include <asm/types.h>
+#include <linux/types.h>
#ifdef __GNUC__
typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end);
char * __acpi_map_table (unsigned long phys_addr, unsigned long size);
+void __acpi_unmap_table(char *map, unsigned long size);
int early_acpi_boot_init(void);
int acpi_boot_init (void);
int acpi_boot_table_init (void);
#define CODA_PSDEV_MAJOR 67
#define MAX_CODADEVS 5 /* how many do we allow */
+#ifdef __KERNEL__
struct kstatfs;
/* communication pending/processing queues */
return (struct venus_comm *)((sb)->s_fs_info);
}
-
/* upcalls */
int venus_rootfid(struct super_block *sb, struct CodaFid *fidp);
int venus_getattr(struct super_block *sb, struct CodaFid *fid,
int venus_fsync(struct super_block *sb, struct CodaFid *fid);
int venus_statfs(struct dentry *dentry, struct kstatfs *sfs);
+/*
+ * Statistics
+ */
+
+extern struct venus_comm coda_comms[];
+#endif /* __KERNEL__ */
/* messages between coda filesystem in kernel and Venus */
struct upc_req {
#define REQ_WRITE 0x4
#define REQ_ABORT 0x8
-
-/*
- * Statistics
- */
-
-extern struct venus_comm coda_comms[];
-
#endif
#endif
}
+static inline void elf_core_copy_kernel_regs(elf_gregset_t *elfregs, struct pt_regs *regs)
+{
+#ifdef ELF_CORE_COPY_KERNEL_REGS
+ ELF_CORE_COPY_KERNEL_REGS((*elfregs), regs);
+#else
+ elf_core_copy_regs(elfregs, regs);
+#endif
+}
+
static inline int elf_core_copy_task_regs(struct task_struct *t, elf_gregset_t* elfregs)
{
#ifdef ELF_CORE_COPY_TASK_REGS
* NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined
* in network byte order, not in host byte order as are the IPv4 equivalents
*/
+#ifdef __KERNEL__
extern const struct in6_addr in6addr_any;
#define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } }
extern const struct in6_addr in6addr_loopback;
#define IN6ADDR_LOOPBACK_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } } }
-#ifdef __KERNEL__
extern const struct in6_addr in6addr_linklocal_allnodes;
#define IN6ADDR_LINKLOCAL_ALLNODES_INIT \
{ { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,1 } } }
extern void *alloc_locked_buffer(size_t size);
extern void free_locked_buffer(void *buffer, size_t size);
+extern void release_locked_buffer(void *buffer, size_t size);
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
int mask;
};
+#ifdef __KERNEL__
struct nubus_board {
struct nubus_board* next;
struct nubus_dev* first_dev;
void nubus_get_rsrc_str(void* dest,
const struct nubus_dirent *dirent,
int maxlen);
+#endif /* __KERNEL__ */
/* We'd like to get rid of this eventually. Only daynaport.c uses it now. */
static inline void *nubus_slot_addr(int slot)
#include <asm/percpu.h>
+#ifndef PER_CPU_BASE_SECTION
#ifdef CONFIG_SMP
#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+#endif
+
+#ifdef CONFIG_SMP
#ifdef MODULE
#define PER_CPU_SHARED_ALIGNED_SECTION ""
#else
-#define PER_CPU_BASE_SECTION ".data"
#define PER_CPU_SHARED_ALIGNED_SECTION ""
#define PER_CPU_FIRST_SECTION ""
#include <linux/reiserfs_fs_sb.h>
#endif
-struct fid;
-
/*
* include/linux/reiser_fs.h
*
*
*/
+/* ioctl's command */
+#define REISERFS_IOC_UNPACK _IOW(0xCD,1,long)
+/* define following flags to be the same as in ext2, so that chattr(1),
+ lsattr(1) will work with us. */
+#define REISERFS_IOC_GETFLAGS FS_IOC_GETFLAGS
+#define REISERFS_IOC_SETFLAGS FS_IOC_SETFLAGS
+#define REISERFS_IOC_GETVERSION FS_IOC_GETVERSION
+#define REISERFS_IOC_SETVERSION FS_IOC_SETVERSION
+
+#ifdef __KERNEL__
+/* the 32 bit compat definitions with int argument */
+#define REISERFS_IOC32_UNPACK _IOW(0xCD, 1, int)
+#define REISERFS_IOC32_GETFLAGS FS_IOC32_GETFLAGS
+#define REISERFS_IOC32_SETFLAGS FS_IOC32_SETFLAGS
+#define REISERFS_IOC32_GETVERSION FS_IOC32_GETVERSION
+#define REISERFS_IOC32_SETVERSION FS_IOC32_SETVERSION
+
+/* Locking primitives */
+/* Right now we are still falling back to (un)lock_kernel, but eventually that
+ would evolve into real per-fs locks */
+#define reiserfs_write_lock( sb ) lock_kernel()
+#define reiserfs_write_unlock( sb ) unlock_kernel()
+
+/* xattr stuff */
+#define REISERFS_XATTR_DIR_SEM(s) (REISERFS_SB(s)->xattr_dir_sem)
+struct fid;
+
/* in reading the #defines, it may help to understand that they employ
the following abbreviations:
/* object identifier for root dir */
#define REISERFS_ROOT_OBJECTID 2
#define REISERFS_ROOT_PARENT_OBJECTID 1
+
extern struct reiserfs_key root_key;
/*
/* FUNCTION DECLARATIONS */
/***************************************************************************/
-/*#ifdef __KERNEL__*/
#define get_journal_desc_magic(bh) (bh->b_data + bh->b_size - 12)
#define journal_trans_half(blocksize) \
unsigned int cmd, unsigned long arg);
int reiserfs_unpack(struct inode *inode, struct file *filp);
-/* ioctl's command */
-#define REISERFS_IOC_UNPACK _IOW(0xCD,1,long)
-/* define following flags to be the same as in ext2, so that chattr(1),
- lsattr(1) will work with us. */
-#define REISERFS_IOC_GETFLAGS FS_IOC_GETFLAGS
-#define REISERFS_IOC_SETFLAGS FS_IOC_SETFLAGS
-#define REISERFS_IOC_GETVERSION FS_IOC_GETVERSION
-#define REISERFS_IOC_SETVERSION FS_IOC_SETVERSION
-
-/* the 32 bit compat definitions with int argument */
-#define REISERFS_IOC32_UNPACK _IOW(0xCD, 1, int)
-#define REISERFS_IOC32_GETFLAGS FS_IOC32_GETFLAGS
-#define REISERFS_IOC32_SETFLAGS FS_IOC32_SETFLAGS
-#define REISERFS_IOC32_GETVERSION FS_IOC32_GETVERSION
-#define REISERFS_IOC32_SETVERSION FS_IOC32_SETVERSION
-
-/* Locking primitives */
-/* Right now we are still falling back to (un)lock_kernel, but eventually that
- would evolve into real per-fs locks */
-#define reiserfs_write_lock( sb ) lock_kernel()
-#define reiserfs_write_unlock( sb ) unlock_kernel()
-
-/* xattr stuff */
-#define REISERFS_XATTR_DIR_SEM(s) (REISERFS_SB(s)->xattr_dir_sem)
+#endif /* __KERNEL__ */
#endif /* _LINUX_REISER_FS_H */
#include <linux/types.h> /* pid_t */
#include <linux/compiler.h> /* __user */
-#ifdef CONFIG_PROC_FS
+#ifdef __KERNEL__
+# ifdef CONFIG_PROC_FS
struct seq_file;
extern void socket_seq_show(struct seq_file *seq);
-#endif
+# endif
+#endif /* __KERNEL__ */
typedef unsigned short sa_family_t;
#ifndef _LINUX_TYPES_H
#define _LINUX_TYPES_H
+#include <asm/types.h>
+
+#ifndef __ASSEMBLY__
#ifdef __KERNEL__
#define DECLARE_BITMAP(name,bits) \
#endif
#include <linux/posix_types.h>
-#include <asm/types.h>
#ifndef __KERNEL_STRICT_NAMES
};
#endif /* __KERNEL__ */
-
+#endif /* __ASSEMBLY__ */
#endif /* _LINUX_TYPES_H */
return;
memset(&prstatus, 0, sizeof(prstatus));
prstatus.pr_pid = current->pid;
- elf_core_copy_regs(&prstatus.pr_reg, regs);
+ elf_core_copy_kernel_regs(&prstatus.pr_reg, regs);
buf = append_elf_note(buf, KEXEC_CORE_NOTE_NAME, NT_PRSTATUS,
&prstatus, sizeof(prstatus));
final_note(buf);
#ifdef CONFIG_CC_STACKPROTECTOR
-#ifndef GCC_HAS_SP
-#warning You have selected the CONFIG_CC_STACKPROTECTOR option, but the gcc used does not support this.
-#endif
-
/*
* Called when gcc's -fstack-protector feature is used, and
* gcc detects corruption of the on-stack canary value
return buffer;
}
-void free_locked_buffer(void *buffer, size_t size)
+void release_locked_buffer(void *buffer, size_t size)
{
unsigned long pgsz = PAGE_ALIGN(size) >> PAGE_SHIFT;
current->mm->locked_vm -= pgsz;
up_write(¤t->mm->mmap_sem);
+}
+
+void free_locked_buffer(void *buffer, size_t size)
+{
+ release_locked_buffer(buffer, size);
kfree(buffer);
}
--- /dev/null
+#!/bin/sh
+
+echo "int foo(void) { char X[200]; return 3; }" | $* -S -xc -c -O0 -fstack-protector - -o - 2> /dev/null | grep -q "%gs"
+if [ "$?" -eq "0" ] ; then
+ echo y
+else
+ echo n
+fi
#!/bin/sh
-echo "int foo(void) { char X[200]; return 3; }" | $1 -S -xc -c -O0 -mcmodel=kernel -fstack-protector - -o - 2> /dev/null | grep -q "%gs"
+echo "int foo(void) { char X[200]; return 3; }" | $* -S -xc -c -O0 -mcmodel=kernel -fstack-protector - -o - 2> /dev/null | grep -q "%gs"
if [ "$?" -eq "0" ] ; then
- echo $2
+ echo y
+else
+ echo n
fi
&check_asm_types();
&check_sizetypes();
&check_prototypes();
- &check_config();
+ # Dropped for now. Too much noise &check_config();
}
close FH;
}
const char *secstrings
= (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
const char *secname;
+ int nobits = sechdrs[i].sh_type == SHT_NOBITS;
- if (sechdrs[i].sh_offset > info->size) {
+ if (!nobits && sechdrs[i].sh_offset > info->size) {
fatal("%s is truncated. sechdrs[i].sh_offset=%lu > "
"sizeof(*hrd)=%zu\n", filename,
(unsigned long)sechdrs[i].sh_offset,
}
secname = secstrings + sechdrs[i].sh_name;
if (strcmp(secname, ".modinfo") == 0) {
+ if (nobits)
+ fatal("%s has NOBITS .modinfo\n", filename);
info->modinfo = (void *)hdr + sechdrs[i].sh_offset;
info->modinfo_len = sechdrs[i].sh_size;
} else if (strcmp(secname, "__ksymtab") == 0)
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff