SAFE public projects git trees. - safe/jmp/linux-2.6/blob - drivers/video/intelfb/intelfbhw.c

   1 /*
   2  * intelfb
   3  *
   4  * Linux framebuffer driver for Intel(R) 865G integrated graphics chips.
   5  *
   6  * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
   7  *                   2004 Sylvain Meyer
   8  *
   9  * This driver consists of two parts.  The first part (intelfbdrv.c) provides
  10  * the basic fbdev interfaces, is derived in part from the radeonfb and
  11  * vesafb drivers, and is covered by the GPL.  The second part (intelfbhw.c)
  12  * provides the code to program the hardware.  Most of it is derived from
  13  * the i810/i830 XFree86 driver.  The HW-specific code is covered here
  14  * under a dual license (GPL and MIT/XFree86 license).
  15  *
  16  * Author: David Dawes
  17  *
  18  */
  19
  20 /* $DHD: intelfb/intelfbhw.c,v 1.9 2003/06/27 15:06:25 dawes Exp $ */
  21
  22 #include <linux/config.h>
  23 #include <linux/module.h>
  24 #include <linux/kernel.h>
  25 #include <linux/errno.h>
  26 #include <linux/string.h>
  27 #include <linux/mm.h>
  28 #include <linux/tty.h>
  29 #include <linux/slab.h>
  30 #include <linux/delay.h>
  31 #include <linux/fb.h>
  32 #include <linux/ioport.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35 #include <linux/vmalloc.h>
  36 #include <linux/pagemap.h>
  37
  38 #include <asm/io.h>
  39
  40 #include "intelfb.h"
  41 #include "intelfbhw.h"
  42
  43 struct pll_min_max {
  44         int min_m, max_m, min_m1, max_m1;
  45         int min_m2, max_m2, min_n, max_n;
  46         int min_p, max_p, min_p1, max_p1;
  47         int min_vco, max_vco, p_transition_clk, ref_clk;
  48         int p_inc_lo, p_inc_hi;
  49 };
  50
  51 #define PLLS_I8xx 0
  52 #define PLLS_I9xx 1
  53 #define PLLS_MAX 2
  54
  55 static struct pll_min_max plls[PLLS_MAX] = {
  56         { 108, 140, 18, 26,
  57           6, 16, 3, 16,
  58           4, 128, 0, 31,
  59           930000, 1400000, 165000, 48000,
  60           4, 2 }, //I8xx
  61
  62         { 75, 120, 10, 20,
  63           5, 9, 4, 7,
  64           5, 80, 1, 8,
  65           1400000, 2800000, 200000, 96000,
  66           10, 5 }  //I9xx
  67 };
  68
  69 int
  70 intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
  71 {
  72         u32 tmp;
  73         if (!pdev || !dinfo)
  74                 return 1;
  75
  76         switch (pdev->device) {
  77         case PCI_DEVICE_ID_INTEL_830M:
  78                 dinfo->name = "Intel(R) 830M";
  79                 dinfo->chipset = INTEL_830M;
  80                 dinfo->mobile = 1;
  81                 dinfo->pll_index = PLLS_I8xx;
  82                 return 0;
  83         case PCI_DEVICE_ID_INTEL_845G:
  84                 dinfo->name = "Intel(R) 845G";
  85                 dinfo->chipset = INTEL_845G;
  86                 dinfo->mobile = 0;
  87                 dinfo->pll_index = PLLS_I8xx;
  88                 return 0;
  89         case PCI_DEVICE_ID_INTEL_85XGM:
  90                 tmp = 0;
  91                 dinfo->mobile = 1;
  92                 dinfo->pll_index = PLLS_I8xx;
  93                 pci_read_config_dword(pdev, INTEL_85X_CAPID, &tmp);
  94                 switch ((tmp >> INTEL_85X_VARIANT_SHIFT) &
  95                         INTEL_85X_VARIANT_MASK) {
  96                 case INTEL_VAR_855GME:
  97                         dinfo->name = "Intel(R) 855GME";
  98                         dinfo->chipset = INTEL_855GME;
  99                         return 0;
 100                 case INTEL_VAR_855GM:
 101                         dinfo->name = "Intel(R) 855GM";
 102                         dinfo->chipset = INTEL_855GM;
 103                         return 0;
 104                 case INTEL_VAR_852GME:
 105                         dinfo->name = "Intel(R) 852GME";
 106                         dinfo->chipset = INTEL_852GME;
 107                         return 0;
 108                 case INTEL_VAR_852GM:
 109                         dinfo->name = "Intel(R) 852GM";
 110                         dinfo->chipset = INTEL_852GM;
 111                         return 0;
 112                 default:
 113                         dinfo->name = "Intel(R) 852GM/855GM";
 114                         dinfo->chipset = INTEL_85XGM;
 115                         return 0;
 116                 }
 117                 break;
 118         case PCI_DEVICE_ID_INTEL_865G:
 119                 dinfo->name = "Intel(R) 865G";
 120                 dinfo->chipset = INTEL_865G;
 121                 dinfo->mobile = 0;
 122                 dinfo->pll_index = PLLS_I8xx;
 123                 return 0;
 124         case PCI_DEVICE_ID_INTEL_915G:
 125                 dinfo->name = "Intel(R) 915G";
 126                 dinfo->chipset = INTEL_915G;
 127                 dinfo->mobile = 0;
 128                 dinfo->pll_index = PLLS_I9xx;
 129                 return 0;
 130         case PCI_DEVICE_ID_INTEL_915GM:
 131                 dinfo->name = "Intel(R) 915GM";
 132                 dinfo->chipset = INTEL_915GM;
 133                 dinfo->mobile = 1;
 134                 dinfo->pll_index = PLLS_I9xx;
 135                 return 0;
 136         case PCI_DEVICE_ID_INTEL_945G:
 137                 dinfo->name = "Intel(R) 945G";
 138                 dinfo->chipset = INTEL_945G;
 139                 dinfo->mobile = 0;
 140                 dinfo->pll_index = PLLS_I9xx;
 141                 return 0;
 142         case PCI_DEVICE_ID_INTEL_945GM:
 143                 dinfo->name = "Intel(R) 945GM";
 144                 dinfo->chipset = INTEL_945GM;
 145                 dinfo->mobile = 1;
 146                 dinfo->pll_index = PLLS_I9xx;
 147                 return 0;
 148         default:
 149                 return 1;
 150         }
 151 }
 152
 153 int
 154 intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
 155                      int *stolen_size)
 156 {
 157         struct pci_dev *bridge_dev;
 158         u16 tmp;
 159         int stolen_overhead;
 160
 161         if (!pdev || !aperture_size || !stolen_size)
 162                 return 1;
 163
 164         /* Find the bridge device.  It is always 0:0.0 */
 165         if (!(bridge_dev = pci_find_slot(0, PCI_DEVFN(0, 0)))) {
 166                 ERR_MSG("cannot find bridge device\n");
 167                 return 1;
 168         }
 169
 170         /* Get the fb aperture size and "stolen" memory amount. */
 171         tmp = 0;
 172         pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
 173         switch (pdev->device) {
 174         case PCI_DEVICE_ID_INTEL_915G:
 175         case PCI_DEVICE_ID_INTEL_915GM:
 176         case PCI_DEVICE_ID_INTEL_945G:
 177         case PCI_DEVICE_ID_INTEL_945GM:
 178                 /* 915 and 945 chipsets support a 256MB aperture.
 179                    Aperture size is determined by inspected the
 180                    base address of the aperture. */
 181                 if (pci_resource_start(pdev, 2) & 0x08000000)
 182                         *aperture_size = MB(128);
 183                 else
 184                         *aperture_size = MB(256);
 185                 break;
 186         default:
 187                 if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
 188                         *aperture_size = MB(64);
 189                 else
 190                         *aperture_size = MB(128);
 191                 break;
 192         }
 193
 194         /* Stolen memory size is reduced by the GTT and the popup.
 195            GTT is 1K per MB of aperture size, and popup is 4K. */
 196         stolen_overhead = (*aperture_size / MB(1)) + 4;
 197         switch(pdev->device) {
 198         case PCI_DEVICE_ID_INTEL_830M:
 199         case PCI_DEVICE_ID_INTEL_845G:
 200                 switch (tmp & INTEL_830_GMCH_GMS_MASK) {
 201                 case INTEL_830_GMCH_GMS_STOLEN_512:
 202                         *stolen_size = KB(512) - KB(stolen_overhead);
 203                         return 0;
 204                 case INTEL_830_GMCH_GMS_STOLEN_1024:
 205                         *stolen_size = MB(1) - KB(stolen_overhead);
 206                         return 0;
 207                 case INTEL_830_GMCH_GMS_STOLEN_8192:
 208                         *stolen_size = MB(8) - KB(stolen_overhead);
 209                         return 0;
 210                 case INTEL_830_GMCH_GMS_LOCAL:
 211                         ERR_MSG("only local memory found\n");
 212                         return 1;
 213                 case INTEL_830_GMCH_GMS_DISABLED:
 214                         ERR_MSG("video memory is disabled\n");
 215                         return 1;
 216                 default:
 217                         ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
 218                                 tmp & INTEL_830_GMCH_GMS_MASK);
 219                         return 1;
 220                 }
 221                 break;
 222         default:
 223                 switch (tmp & INTEL_855_GMCH_GMS_MASK) {
 224                 case INTEL_855_GMCH_GMS_STOLEN_1M:
 225                         *stolen_size = MB(1) - KB(stolen_overhead);
 226                         return 0;
 227                 case INTEL_855_GMCH_GMS_STOLEN_4M:
 228                         *stolen_size = MB(4) - KB(stolen_overhead);
 229                         return 0;
 230                 case INTEL_855_GMCH_GMS_STOLEN_8M:
 231                         *stolen_size = MB(8) - KB(stolen_overhead);
 232                         return 0;
 233                 case INTEL_855_GMCH_GMS_STOLEN_16M:
 234                         *stolen_size = MB(16) - KB(stolen_overhead);
 235                         return 0;
 236                 case INTEL_855_GMCH_GMS_STOLEN_32M:
 237                         *stolen_size = MB(32) - KB(stolen_overhead);
 238                         return 0;
 239                 case INTEL_915G_GMCH_GMS_STOLEN_48M:
 240                         *stolen_size = MB(48) - KB(stolen_overhead);
 241                         return 0;
 242                 case INTEL_915G_GMCH_GMS_STOLEN_64M:
 243                         *stolen_size = MB(64) - KB(stolen_overhead);
 244                         return 0;
 245                 case INTEL_855_GMCH_GMS_DISABLED:
 246                         ERR_MSG("video memory is disabled\n");
 247                         return 0;
 248                 default:
 249                         ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
 250                                 tmp & INTEL_855_GMCH_GMS_MASK);
 251                         return 1;
 252                 }
 253         }
 254 }
 255
 256 int
 257 intelfbhw_check_non_crt(struct intelfb_info *dinfo)
 258 {
 259         int dvo = 0;
 260
 261         if (INREG(LVDS) & PORT_ENABLE)
 262                 dvo |= LVDS_PORT;
 263         if (INREG(DVOA) & PORT_ENABLE)
 264                 dvo |= DVOA_PORT;
 265         if (INREG(DVOB) & PORT_ENABLE)
 266                 dvo |= DVOB_PORT;
 267         if (INREG(DVOC) & PORT_ENABLE)
 268                 dvo |= DVOC_PORT;
 269
 270         return dvo;
 271 }
 272
 273 const char *
 274 intelfbhw_dvo_to_string(int dvo)
 275 {
 276         if (dvo & DVOA_PORT)
 277                 return "DVO port A";
 278         else if (dvo & DVOB_PORT)
 279                 return "DVO port B";
 280         else if (dvo & DVOC_PORT)
 281                 return "DVO port C";
 282         else if (dvo & LVDS_PORT)
 283                 return "LVDS port";
 284         else
 285                 return NULL;
 286 }
 287
 288
 289 int
 290 intelfbhw_validate_mode(struct intelfb_info *dinfo,
 291                         struct fb_var_screeninfo *var)
 292 {
 293         int bytes_per_pixel;
 294         int tmp;
 295
 296 #if VERBOSE > 0
 297         DBG_MSG("intelfbhw_validate_mode\n");
 298 #endif
 299
 300         bytes_per_pixel = var->bits_per_pixel / 8;
 301         if (bytes_per_pixel == 3)
 302                 bytes_per_pixel = 4;
 303
 304         /* Check if enough video memory. */
 305         tmp = var->yres_virtual * var->xres_virtual * bytes_per_pixel;
 306         if (tmp > dinfo->fb.size) {
 307                 WRN_MSG("Not enough video ram for mode "
 308                         "(%d KByte vs %d KByte).\n",
 309                         BtoKB(tmp), BtoKB(dinfo->fb.size));
 310                 return 1;
 311         }
 312
 313         /* Check if x/y limits are OK. */
 314         if (var->xres - 1 > HACTIVE_MASK) {
 315                 WRN_MSG("X resolution too large (%d vs %d).\n",
 316                         var->xres, HACTIVE_MASK + 1);
 317                 return 1;
 318         }
 319         if (var->yres - 1 > VACTIVE_MASK) {
 320                 WRN_MSG("Y resolution too large (%d vs %d).\n",
 321                         var->yres, VACTIVE_MASK + 1);
 322                 return 1;
 323         }
 324
 325         /* Check for interlaced/doublescan modes. */
 326         if (var->vmode & FB_VMODE_INTERLACED) {
 327                 WRN_MSG("Mode is interlaced.\n");
 328                 return 1;
 329         }
 330         if (var->vmode & FB_VMODE_DOUBLE) {
 331                 WRN_MSG("Mode is double-scan.\n");
 332                 return 1;
 333         }
 334
 335         /* Check if clock is OK. */
 336         tmp = 1000000000 / var->pixclock;
 337         if (tmp < MIN_CLOCK) {
 338                 WRN_MSG("Pixel clock is too low (%d MHz vs %d MHz).\n",
 339                         (tmp + 500) / 1000, MIN_CLOCK / 1000);
 340                 return 1;
 341         }
 342         if (tmp > MAX_CLOCK) {
 343                 WRN_MSG("Pixel clock is too high (%d MHz vs %d MHz).\n",
 344                         (tmp + 500) / 1000, MAX_CLOCK / 1000);
 345                 return 1;
 346         }
 347
 348         return 0;
 349 }
 350
 351 int
 352 intelfbhw_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
 353 {
 354         struct intelfb_info *dinfo = GET_DINFO(info);
 355         u32 offset, xoffset, yoffset;
 356
 357 #if VERBOSE > 0
 358         DBG_MSG("intelfbhw_pan_display\n");
 359 #endif
 360
 361         xoffset = ROUND_DOWN_TO(var->xoffset, 8);
 362         yoffset = var->yoffset;
 363
 364         if ((xoffset + var->xres > var->xres_virtual) ||
 365             (yoffset + var->yres > var->yres_virtual))
 366                 return -EINVAL;
 367
 368         offset = (yoffset * dinfo->pitch) +
 369                  (xoffset * var->bits_per_pixel) / 8;
 370
 371         offset += dinfo->fb.offset << 12;
 372
 373         OUTREG(DSPABASE, offset);
 374
 375         return 0;
 376 }
 377
 378 /* Blank the screen. */
 379 void
 380 intelfbhw_do_blank(int blank, struct fb_info *info)
 381 {
 382         struct intelfb_info *dinfo = GET_DINFO(info);
 383         u32 tmp;
 384
 385 #if VERBOSE > 0
 386         DBG_MSG("intelfbhw_do_blank: blank is %d\n", blank);
 387 #endif
 388
 389         /* Turn plane A on or off */
 390         tmp = INREG(DSPACNTR);
 391         if (blank)
 392                 tmp &= ~DISPPLANE_PLANE_ENABLE;
 393         else
 394                 tmp |= DISPPLANE_PLANE_ENABLE;
 395         OUTREG(DSPACNTR, tmp);
 396         /* Flush */
 397         tmp = INREG(DSPABASE);
 398         OUTREG(DSPABASE, tmp);
 399
 400         /* Turn off/on the HW cursor */
 401 #if VERBOSE > 0
 402         DBG_MSG("cursor_on is %d\n", dinfo->cursor_on);
 403 #endif
 404         if (dinfo->cursor_on) {
 405                 if (blank) {
 406                         intelfbhw_cursor_hide(dinfo);
 407                 } else {
 408                         intelfbhw_cursor_show(dinfo);
 409                 }
 410                 dinfo->cursor_on = 1;
 411         }
 412         dinfo->cursor_blanked = blank;
 413
 414         /* Set DPMS level */
 415         tmp = INREG(ADPA) & ~ADPA_DPMS_CONTROL_MASK;
 416         switch (blank) {
 417         case FB_BLANK_UNBLANK:
 418         case FB_BLANK_NORMAL:
 419                 tmp |= ADPA_DPMS_D0;
 420                 break;
 421         case FB_BLANK_VSYNC_SUSPEND:
 422                 tmp |= ADPA_DPMS_D1;
 423                 break;
 424         case FB_BLANK_HSYNC_SUSPEND:
 425                 tmp |= ADPA_DPMS_D2;
 426                 break;
 427         case FB_BLANK_POWERDOWN:
 428                 tmp |= ADPA_DPMS_D3;
 429                 break;
 430         }
 431         OUTREG(ADPA, tmp);
 432
 433         return;
 434 }
 435
 436
 437 void
 438 intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
 439                     unsigned red, unsigned green, unsigned blue,
 440                     unsigned transp)
 441 {
 442 #if VERBOSE > 0
 443         DBG_MSG("intelfbhw_setcolreg: %d: (%d, %d, %d)\n",
 444                 regno, red, green, blue);
 445 #endif
 446
 447         u32 palette_reg = (dinfo->pipe == PIPE_A) ?
 448                           PALETTE_A : PALETTE_B;
 449
 450         OUTREG(palette_reg + (regno << 2),
 451                (red << PALETTE_8_RED_SHIFT) |
 452                (green << PALETTE_8_GREEN_SHIFT) |
 453                (blue << PALETTE_8_BLUE_SHIFT));
 454 }
 455
 456
 457 int
 458 intelfbhw_read_hw_state(struct intelfb_info *dinfo, struct intelfb_hwstate *hw,
 459                         int flag)
 460 {
 461         int i;
 462
 463 #if VERBOSE > 0
 464         DBG_MSG("intelfbhw_read_hw_state\n");
 465 #endif
 466
 467         if (!hw || !dinfo)
 468                 return -1;
 469
 470         /* Read in as much of the HW state as possible. */
 471         hw->vga0_divisor = INREG(VGA0_DIVISOR);
 472         hw->vga1_divisor = INREG(VGA1_DIVISOR);
 473         hw->vga_pd = INREG(VGAPD);
 474         hw->dpll_a = INREG(DPLL_A);
 475         hw->dpll_b = INREG(DPLL_B);
 476         hw->fpa0 = INREG(FPA0);
 477         hw->fpa1 = INREG(FPA1);
 478         hw->fpb0 = INREG(FPB0);
 479         hw->fpb1 = INREG(FPB1);
 480
 481         if (flag == 1)
 482                 return flag;
 483
 484 #if 0
 485         /* This seems to be a problem with the 852GM/855GM */
 486         for (i = 0; i < PALETTE_8_ENTRIES; i++) {
 487                 hw->palette_a[i] = INREG(PALETTE_A + (i << 2));
 488                 hw->palette_b[i] = INREG(PALETTE_B + (i << 2));
 489         }
 490 #endif
 491
 492         if (flag == 2)
 493                 return flag;
 494
 495         hw->htotal_a = INREG(HTOTAL_A);
 496         hw->hblank_a = INREG(HBLANK_A);
 497         hw->hsync_a = INREG(HSYNC_A);
 498         hw->vtotal_a = INREG(VTOTAL_A);
 499         hw->vblank_a = INREG(VBLANK_A);
 500         hw->vsync_a = INREG(VSYNC_A);
 501         hw->src_size_a = INREG(SRC_SIZE_A);
 502         hw->bclrpat_a = INREG(BCLRPAT_A);
 503         hw->htotal_b = INREG(HTOTAL_B);
 504         hw->hblank_b = INREG(HBLANK_B);
 505         hw->hsync_b = INREG(HSYNC_B);
 506         hw->vtotal_b = INREG(VTOTAL_B);
 507         hw->vblank_b = INREG(VBLANK_B);
 508         hw->vsync_b = INREG(VSYNC_B);
 509         hw->src_size_b = INREG(SRC_SIZE_B);
 510         hw->bclrpat_b = INREG(BCLRPAT_B);
 511
 512         if (flag == 3)
 513                 return flag;
 514
 515         hw->adpa = INREG(ADPA);
 516         hw->dvoa = INREG(DVOA);
 517         hw->dvob = INREG(DVOB);
 518         hw->dvoc = INREG(DVOC);
 519         hw->dvoa_srcdim = INREG(DVOA_SRCDIM);
 520         hw->dvob_srcdim = INREG(DVOB_SRCDIM);
 521         hw->dvoc_srcdim = INREG(DVOC_SRCDIM);
 522         hw->lvds = INREG(LVDS);
 523
 524         if (flag == 4)
 525                 return flag;
 526
 527         hw->pipe_a_conf = INREG(PIPEACONF);
 528         hw->pipe_b_conf = INREG(PIPEBCONF);
 529         hw->disp_arb = INREG(DISPARB);
 530
 531         if (flag == 5)
 532                 return flag;
 533
 534         hw->cursor_a_control = INREG(CURSOR_A_CONTROL);
 535         hw->cursor_b_control = INREG(CURSOR_B_CONTROL);
 536         hw->cursor_a_base = INREG(CURSOR_A_BASEADDR);
 537         hw->cursor_b_base = INREG(CURSOR_B_BASEADDR);
 538
 539         if (flag == 6)
 540                 return flag;
 541
 542         for (i = 0; i < 4; i++) {
 543                 hw->cursor_a_palette[i] = INREG(CURSOR_A_PALETTE0 + (i << 2));
 544                 hw->cursor_b_palette[i] = INREG(CURSOR_B_PALETTE0 + (i << 2));
 545         }
 546
 547         if (flag == 7)
 548                 return flag;
 549
 550         hw->cursor_size = INREG(CURSOR_SIZE);
 551
 552         if (flag == 8)
 553                 return flag;
 554
 555         hw->disp_a_ctrl = INREG(DSPACNTR);
 556         hw->disp_b_ctrl = INREG(DSPBCNTR);
 557         hw->disp_a_base = INREG(DSPABASE);
 558         hw->disp_b_base = INREG(DSPBBASE);
 559         hw->disp_a_stride = INREG(DSPASTRIDE);
 560         hw->disp_b_stride = INREG(DSPBSTRIDE);
 561
 562         if (flag == 9)
 563                 return flag;
 564
 565         hw->vgacntrl = INREG(VGACNTRL);
 566
 567         if (flag == 10)
 568                 return flag;
 569
 570         hw->add_id = INREG(ADD_ID);
 571
 572         if (flag == 11)
 573                 return flag;
 574
 575         for (i = 0; i < 7; i++) {
 576                 hw->swf0x[i] = INREG(SWF00 + (i << 2));
 577                 hw->swf1x[i] = INREG(SWF10 + (i << 2));
 578                 if (i < 3)
 579                         hw->swf3x[i] = INREG(SWF30 + (i << 2));
 580         }
 581
 582         for (i = 0; i < 8; i++)
 583                 hw->fence[i] = INREG(FENCE + (i << 2));
 584
 585         hw->instpm = INREG(INSTPM);
 586         hw->mem_mode = INREG(MEM_MODE);
 587         hw->fw_blc_0 = INREG(FW_BLC_0);
 588         hw->fw_blc_1 = INREG(FW_BLC_1);
 589
 590         return 0;
 591 }
 592
 593
 594 static int calc_vclock3(int index, int m, int n, int p)
 595 {
 596         if (p == 0 || n == 0)
 597                 return 0;
 598         return plls[index].ref_clk * m / n / p;
 599 }
 600
 601 static int calc_vclock(int index, int m1, int m2, int n, int p1, int p2, int lvds)
 602 {
 603         struct pll_min_max *pll = &plls[index];
 604         u32 m, vco, p;
 605
 606         m = (5 * (m1 + 2)) + (m2 + 2);
 607         n += 2;
 608         vco = pll->ref_clk * m / n;
 609
 610         if (index == PLLS_I8xx) {
 611                 p = ((p1 + 2) * (1 << (p2 + 1)));
 612         } else {
 613                 p = ((p1) * (p2 ? 5 : 10));
 614         }
 615         return vco / p;
 616 }
 617
 618 void
 619 intelfbhw_print_hw_state(struct intelfb_info *dinfo, struct intelfb_hwstate *hw)
 620 {
 621 #if REGDUMP
 622         int i, m1, m2, n, p1, p2;
 623         int index = dinfo->pll_index;
 624         DBG_MSG("intelfbhw_print_hw_state\n");
 625
 626         if (!hw || !dinfo)
 627                 return;
 628         /* Read in as much of the HW state as possible. */
 629         printk("hw state dump start\n");
 630         printk("        VGA0_DIVISOR:           0x%08x\n", hw->vga0_divisor);
 631         printk("        VGA1_DIVISOR:           0x%08x\n", hw->vga1_divisor);
 632         printk("        VGAPD:                  0x%08x\n", hw->vga_pd);
 633         n = (hw->vga0_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 634         m1 = (hw->vga0_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 635         m2 = (hw->vga0_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 636         if (hw->vga_pd & VGAPD_0_P1_FORCE_DIV2)
 637                 p1 = 0;
 638         else
 639                 p1 = (hw->vga_pd >> VGAPD_0_P1_SHIFT) & DPLL_P1_MASK;
 640
 641         p2 = (hw->vga_pd >> VGAPD_0_P2_SHIFT) & DPLL_P2_MASK;
 642
 643         printk("        VGA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 644                m1, m2, n, p1, p2);
 645         printk("        VGA0: clock is %d\n",
 646                calc_vclock(index, m1, m2, n, p1, p2, 0));
 647
 648         n = (hw->vga1_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 649         m1 = (hw->vga1_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 650         m2 = (hw->vga1_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 651         if (hw->vga_pd & VGAPD_1_P1_FORCE_DIV2)
 652                 p1 = 0;
 653         else
 654                 p1 = (hw->vga_pd >> VGAPD_1_P1_SHIFT) & DPLL_P1_MASK;
 655         p2 = (hw->vga_pd >> VGAPD_1_P2_SHIFT) & DPLL_P2_MASK;
 656         printk("        VGA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 657                m1, m2, n, p1, p2);
 658         printk("        VGA1: clock is %d\n", calc_vclock(index, m1, m2, n, p1, p2, 0));
 659
 660         printk("        DPLL_A:                 0x%08x\n", hw->dpll_a);
 661         printk("        DPLL_B:                 0x%08x\n", hw->dpll_b);
 662         printk("        FPA0:                   0x%08x\n", hw->fpa0);
 663         printk("        FPA1:                   0x%08x\n", hw->fpa1);
 664         printk("        FPB0:                   0x%08x\n", hw->fpb0);
 665         printk("        FPB1:                   0x%08x\n", hw->fpb1);
 666
 667         n = (hw->fpa0 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 668         m1 = (hw->fpa0 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 669         m2 = (hw->fpa0 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 670
 671         if (IS_I9XX(dinfo)) {
 672                 int tmpp1;
 673
 674                 if (hw->dpll_a & DPLL_P1_FORCE_DIV2)
 675                         p1 = 0;
 676                 else
 677                         p1 = (hw->dpll_a >> DPLL_P1_SHIFT) & 0xff;
 678
 679                 tmpp1 = p1;
 680
 681                 switch (tmpp1)
 682                 {
 683                 case 0x1: p1 = 1; break;
 684                 case 0x2: p1 = 2; break;
 685                 case 0x4: p1 = 3; break;
 686                 case 0x8: p1 = 4; break;
 687                 case 0x10: p1 = 5; break;
 688                 case 0x20: p1 = 6; break;
 689                 case 0x40: p1 = 7; break;
 690                 case 0x80: p1 = 8; break;
 691                 default: break;
 692                 }
 693
 694                 p2 = (hw->dpll_a >> DPLL_I9XX_P2_SHIFT) & DPLL_P2_MASK;
 695
 696         } else {
 697                 if (hw->dpll_a & DPLL_P1_FORCE_DIV2)
 698                         p1 = 0;
 699                 else
 700                         p1 = (hw->dpll_a >> DPLL_P1_SHIFT) & DPLL_P1_MASK;
 701                 p2 = (hw->dpll_a >> DPLL_P2_SHIFT) & DPLL_P2_MASK;
 702         }
 703
 704         printk("        PLLA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 705                m1, m2, n, p1, p2);
 706         printk("        PLLA0: clock is %d\n", calc_vclock(index, m1, m2, n, p1, p2, 0));
 707
 708         n = (hw->fpa1 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 709         m1 = (hw->fpa1 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 710         m2 = (hw->fpa1 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
 711
 712         if (IS_I9XX(dinfo)) {
 713                 int tmpp1;
 714
 715                 if (hw->dpll_a & DPLL_P1_FORCE_DIV2)
 716                         p1 = 0;
 717                 else
 718                         p1 = (hw->dpll_a >> DPLL_P1_SHIFT) & 0xff;
 719
 720                 tmpp1 = p1;
 721
 722                 switch (tmpp1) {
 723                 case 0x1: p1 = 1; break;
 724                 case 0x2: p1 = 2; break;
 725                 case 0x4: p1 = 3; break;
 726                 case 0x8: p1 = 4; break;
 727                 case 0x10: p1 = 5; break;
 728                 case 0x20: p1 = 6; break;
 729                 case 0x40: p1 = 7; break;
 730                 case 0x80: p1 = 8; break;
 731                 default: break;
 732                 }
 733
 734                 p2 = (hw->dpll_a >> DPLL_I9XX_P2_SHIFT) & DPLL_P2_MASK;
 735
 736         } else {
 737                 if (hw->dpll_a & DPLL_P1_FORCE_DIV2)
 738                         p1 = 0;
 739                 else
 740                         p1 = (hw->dpll_a >> DPLL_P1_SHIFT) & DPLL_P1_MASK;
 741                 p2 = (hw->dpll_a >> DPLL_P2_SHIFT) & DPLL_P2_MASK;
 742         }
 743         printk("        PLLA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
 744                m1, m2, n, p1, p2);
 745         printk("        PLLA1: clock is %d\n", calc_vclock(index, m1, m2, n, p1, p2, 0));
 746
 747 #if 0
 748         printk("        PALETTE_A:\n");
 749         for (i = 0; i < PALETTE_8_ENTRIES)
 750                 printk("        %3d:    0x%08x\n", i, hw->palette_a[i]);
 751         printk("        PALETTE_B:\n");
 752         for (i = 0; i < PALETTE_8_ENTRIES)
 753                 printk("        %3d:    0x%08x\n", i, hw->palette_b[i]);
 754 #endif
 755
 756         printk("        HTOTAL_A:               0x%08x\n", hw->htotal_a);
 757         printk("        HBLANK_A:               0x%08x\n", hw->hblank_a);
 758         printk("        HSYNC_A:                0x%08x\n", hw->hsync_a);
 759         printk("        VTOTAL_A:               0x%08x\n", hw->vtotal_a);
 760         printk("        VBLANK_A:               0x%08x\n", hw->vblank_a);
 761         printk("        VSYNC_A:                0x%08x\n", hw->vsync_a);
 762         printk("        SRC_SIZE_A:             0x%08x\n", hw->src_size_a);
 763         printk("        BCLRPAT_A:              0x%08x\n", hw->bclrpat_a);
 764         printk("        HTOTAL_B:               0x%08x\n", hw->htotal_b);
 765         printk("        HBLANK_B:               0x%08x\n", hw->hblank_b);
 766         printk("        HSYNC_B:                0x%08x\n", hw->hsync_b);
 767         printk("        VTOTAL_B:               0x%08x\n", hw->vtotal_b);
 768         printk("        VBLANK_B:               0x%08x\n", hw->vblank_b);
 769         printk("        VSYNC_B:                0x%08x\n", hw->vsync_b);
 770         printk("        SRC_SIZE_B:             0x%08x\n", hw->src_size_b);
 771         printk("        BCLRPAT_B:              0x%08x\n", hw->bclrpat_b);
 772
 773         printk("        ADPA:                   0x%08x\n", hw->adpa);
 774         printk("        DVOA:                   0x%08x\n", hw->dvoa);
 775         printk("        DVOB:                   0x%08x\n", hw->dvob);
 776         printk("        DVOC:                   0x%08x\n", hw->dvoc);
 777         printk("        DVOA_SRCDIM:            0x%08x\n", hw->dvoa_srcdim);
 778         printk("        DVOB_SRCDIM:            0x%08x\n", hw->dvob_srcdim);
 779         printk("        DVOC_SRCDIM:            0x%08x\n", hw->dvoc_srcdim);
 780         printk("        LVDS:                   0x%08x\n", hw->lvds);
 781
 782         printk("        PIPEACONF:              0x%08x\n", hw->pipe_a_conf);
 783         printk("        PIPEBCONF:              0x%08x\n", hw->pipe_b_conf);
 784         printk("        DISPARB:                0x%08x\n", hw->disp_arb);
 785
 786         printk("        CURSOR_A_CONTROL:       0x%08x\n", hw->cursor_a_control);
 787         printk("        CURSOR_B_CONTROL:       0x%08x\n", hw->cursor_b_control);
 788         printk("        CURSOR_A_BASEADDR:      0x%08x\n", hw->cursor_a_base);
 789         printk("        CURSOR_B_BASEADDR:      0x%08x\n", hw->cursor_b_base);
 790
 791         printk("        CURSOR_A_PALETTE:       ");
 792         for (i = 0; i < 4; i++) {
 793                 printk("0x%08x", hw->cursor_a_palette[i]);
 794                 if (i < 3)
 795                         printk(", ");
 796         }
 797         printk("\n");
 798         printk("        CURSOR_B_PALETTE:       ");
 799         for (i = 0; i < 4; i++) {
 800                 printk("0x%08x", hw->cursor_b_palette[i]);
 801                 if (i < 3)
 802                         printk(", ");
 803         }
 804         printk("\n");
 805
 806         printk("        CURSOR_SIZE:            0x%08x\n", hw->cursor_size);
 807
 808         printk("        DSPACNTR:               0x%08x\n", hw->disp_a_ctrl);
 809         printk("        DSPBCNTR:               0x%08x\n", hw->disp_b_ctrl);
 810         printk("        DSPABASE:               0x%08x\n", hw->disp_a_base);
 811         printk("        DSPBBASE:               0x%08x\n", hw->disp_b_base);
 812         printk("        DSPASTRIDE:             0x%08x\n", hw->disp_a_stride);
 813         printk("        DSPBSTRIDE:             0x%08x\n", hw->disp_b_stride);
 814
 815         printk("        VGACNTRL:               0x%08x\n", hw->vgacntrl);
 816         printk("        ADD_ID:                 0x%08x\n", hw->add_id);
 817
 818         for (i = 0; i < 7; i++) {
 819                 printk("        SWF0%d                  0x%08x\n", i,
 820                         hw->swf0x[i]);
 821         }
 822         for (i = 0; i < 7; i++) {
 823                 printk("        SWF1%d                  0x%08x\n", i,
 824                         hw->swf1x[i]);
 825         }
 826         for (i = 0; i < 3; i++) {
 827                 printk("        SWF3%d                  0x%08x\n", i,
 828                        hw->swf3x[i]);
 829         }
 830         for (i = 0; i < 8; i++)
 831                 printk("        FENCE%d                 0x%08x\n", i,
 832                        hw->fence[i]);
 833
 834         printk("        INSTPM                  0x%08x\n", hw->instpm);
 835         printk("        MEM_MODE                0x%08x\n", hw->mem_mode);
 836         printk("        FW_BLC_0                0x%08x\n", hw->fw_blc_0);
 837         printk("        FW_BLC_1                0x%08x\n", hw->fw_blc_1);
 838
 839         printk("hw state dump end\n");
 840 #endif
 841 }
 842
 843
 844
 845 /* Split the M parameter into M1 and M2. */
 846 static int
 847 splitm(int index, unsigned int m, unsigned int *retm1, unsigned int *retm2)
 848 {
 849         int m1, m2;
 850         int testm;
 851         struct pll_min_max *pll = &plls[index];
 852
 853         /* no point optimising too much - brute force m */
 854         for (m1 = pll->min_m1; m1 < pll->max_m1 + 1; m1++) {
 855                 for (m2 = pll->min_m2; m2 < pll->max_m2 + 1; m2++) {
 856                         testm = (5 * (m1 + 2)) + (m2 + 2);
 857                         if (testm == m) {
 858                                 *retm1 = (unsigned int)m1;
 859                                 *retm2 = (unsigned int)m2;
 860                                 return 0;
 861                         }
 862                 }
 863         }
 864         return 1;
 865 }
 866
 867 /* Split the P parameter into P1 and P2. */
 868 static int
 869 splitp(int index, unsigned int p, unsigned int *retp1, unsigned int *retp2)
 870 {
 871         int p1, p2;
 872         struct pll_min_max *pll = &plls[index];
 873
 874         if (index == PLLS_I9xx) {
 875                 p2 = (p % 10) ? 1 : 0;
 876
 877                 p1 = p / (p2 ? 5 : 10);
 878
 879                 *retp1 = (unsigned int)p1;
 880                 *retp2 = (unsigned int)p2;
 881                 return 0;
 882         }
 883
 884         if (p % 4 == 0)
 885                 p2 = 1;
 886         else
 887                 p2 = 0;
 888         p1 = (p / (1 << (p2 + 1))) - 2;
 889         if (p % 4 == 0 && p1 < pll->min_p1) {
 890                 p2 = 0;
 891                 p1 = (p / (1 << (p2 + 1))) - 2;
 892         }
 893         if (p1 < pll->min_p1 || p1 > pll->max_p1 ||
 894             (p1 + 2) * (1 << (p2 + 1)) != p) {
 895                 return 1;
 896         } else {
 897                 *retp1 = (unsigned int)p1;
 898                 *retp2 = (unsigned int)p2;
 899                 return 0;
 900         }
 901 }
 902
 903 static int
 904 calc_pll_params(int index, int clock, u32 *retm1, u32 *retm2, u32 *retn, u32 *retp1,
 905                 u32 *retp2, u32 *retclock)
 906 {
 907         u32 m1, m2, n, p1, p2, n1, testm;
 908         u32 f_vco, p, p_best = 0, m, f_out = 0;
 909         u32 err_max, err_target, err_best = 10000000;
 910         u32 n_best = 0, m_best = 0, f_best, f_err;
 911         u32 p_min, p_max, p_inc, div_max;
 912         struct pll_min_max *pll = &plls[index];
 913
 914         /* Accept 0.5% difference, but aim for 0.1% */
 915         err_max = 5 * clock / 1000;
 916         err_target = clock / 1000;
 917
 918         DBG_MSG("Clock is %d\n", clock);
 919
 920         div_max = pll->max_vco / clock;
 921
 922         p_inc = (clock <= pll->p_transition_clk) ? pll->p_inc_lo : pll->p_inc_hi;
 923         p_min = p_inc;
 924         p_max = ROUND_DOWN_TO(div_max, p_inc);
 925         if (p_min < pll->min_p)
 926                 p_min = pll->min_p;
 927         if (p_max > pll->max_p)
 928                 p_max = pll->max_p;
 929
 930         DBG_MSG("p range is %d-%d (%d)\n", p_min, p_max, p_inc);
 931
 932         p = p_min;
 933         do {
 934                 if (splitp(index, p, &p1, &p2)) {
 935                         WRN_MSG("cannot split p = %d\n", p);
 936                         p += p_inc;
 937                         continue;
 938                 }
 939                 n = pll->min_n;
 940                 f_vco = clock * p;
 941
 942                 do {
 943                         m = ROUND_UP_TO(f_vco * n, pll->ref_clk) / pll->ref_clk;
 944                         if (m < pll->min_m)
 945                                 m = pll->min_m + 1;
 946                         if (m > pll->max_m)
 947                                 m = pll->max_m - 1;
 948                         for (testm = m - 1; testm <= m; testm++) {
 949                                 f_out = calc_vclock3(index, m, n, p);
 950                                 if (splitm(index, testm, &m1, &m2)) {
 951                                         WRN_MSG("cannot split m = %d\n", m);
 952                                         n++;
 953                                         continue;
 954                                 }
 955                                 if (clock > f_out)
 956                                         f_err = clock - f_out;
 957                                 else/* slightly bias the error for bigger clocks */
 958                                         f_err = f_out - clock + 1;
 959
 960                                 if (f_err < err_best) {
 961                                         m_best = testm;
 962                                         n_best = n;
 963                                         p_best = p;
 964                                         f_best = f_out;
 965                                         err_best = f_err;
 966                                 }
 967                         }
 968                         n++;
 969                 } while ((n <= pll->max_n) && (f_out >= clock));
 970                 p += p_inc;
 971         } while ((p <= p_max));
 972
 973         if (!m_best) {
 974                 WRN_MSG("cannot find parameters for clock %d\n", clock);
 975                 return 1;
 976         }
 977         m = m_best;
 978         n = n_best;
 979         p = p_best;
 980         splitm(index, m, &m1, &m2);
 981         splitp(index, p, &p1, &p2);
 982         n1 = n - 2;
 983
 984         DBG_MSG("m, n, p: %d (%d,%d), %d (%d), %d (%d,%d), "
 985                 "f: %d (%d), VCO: %d\n",
 986                 m, m1, m2, n, n1, p, p1, p2,
 987                 calc_vclock3(index, m, n, p),
 988                 calc_vclock(index, m1, m2, n1, p1, p2, 0),
 989                 calc_vclock3(index, m, n, p) * p);
 990         *retm1 = m1;
 991         *retm2 = m2;
 992         *retn = n1;
 993         *retp1 = p1;
 994         *retp2 = p2;
 995         *retclock = calc_vclock(index, m1, m2, n1, p1, p2, 0);
 996
 997         return 0;
 998 }
 999
1000 static __inline__ int
1001 check_overflow(u32 value, u32 limit, const char *description)
1002 {
1003         if (value > limit) {
1004                 WRN_MSG("%s value %d exceeds limit %d\n",
1005                         description, value, limit);
1006                 return 1;
1007         }
1008         return 0;
1009 }
1010
1011 /* It is assumed that hw is filled in with the initial state information. */
1012 int
1013 intelfbhw_mode_to_hw(struct intelfb_info *dinfo, struct intelfb_hwstate *hw,
1014                      struct fb_var_screeninfo *var)
1015 {
1016         int pipe = PIPE_A;
1017         u32 *dpll, *fp0, *fp1;
1018         u32 m1, m2, n, p1, p2, clock_target, clock;
1019         u32 hsync_start, hsync_end, hblank_start, hblank_end, htotal, hactive;
1020         u32 vsync_start, vsync_end, vblank_start, vblank_end, vtotal, vactive;
1021         u32 vsync_pol, hsync_pol;
1022         u32 *vs, *vb, *vt, *hs, *hb, *ht, *ss, *pipe_conf;
1023         u32 stride_alignment;
1024
1025         DBG_MSG("intelfbhw_mode_to_hw\n");
1026
1027         /* Disable VGA */
1028         hw->vgacntrl |= VGA_DISABLE;
1029
1030         /* Check whether pipe A or pipe B is enabled. */
1031         if (hw->pipe_a_conf & PIPECONF_ENABLE)
1032                 pipe = PIPE_A;
1033         else if (hw->pipe_b_conf & PIPECONF_ENABLE)
1034                 pipe = PIPE_B;
1035
1036         /* Set which pipe's registers will be set. */
1037         if (pipe == PIPE_B) {
1038                 dpll = &hw->dpll_b;
1039                 fp0 = &hw->fpb0;
1040                 fp1 = &hw->fpb1;
1041                 hs = &hw->hsync_b;
1042                 hb = &hw->hblank_b;
1043                 ht = &hw->htotal_b;
1044                 vs = &hw->vsync_b;
1045                 vb = &hw->vblank_b;
1046                 vt = &hw->vtotal_b;
1047                 ss = &hw->src_size_b;
1048                 pipe_conf = &hw->pipe_b_conf;
1049         } else {
1050                 dpll = &hw->dpll_a;
1051                 fp0 = &hw->fpa0;
1052                 fp1 = &hw->fpa1;
1053                 hs = &hw->hsync_a;
1054                 hb = &hw->hblank_a;
1055                 ht = &hw->htotal_a;
1056                 vs = &hw->vsync_a;
1057                 vb = &hw->vblank_a;
1058                 vt = &hw->vtotal_a;
1059                 ss = &hw->src_size_a;
1060                 pipe_conf = &hw->pipe_a_conf;
1061         }
1062
1063         /* Use ADPA register for sync control. */
1064         hw->adpa &= ~ADPA_USE_VGA_HVPOLARITY;
1065
1066         /* sync polarity */
1067         hsync_pol = (var->sync & FB_SYNC_HOR_HIGH_ACT) ?
1068                         ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
1069         vsync_pol = (var->sync & FB_SYNC_VERT_HIGH_ACT) ?
1070                         ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
1071         hw->adpa &= ~((ADPA_SYNC_ACTIVE_MASK << ADPA_VSYNC_ACTIVE_SHIFT) |
1072                       (ADPA_SYNC_ACTIVE_MASK << ADPA_HSYNC_ACTIVE_SHIFT));
1073         hw->adpa |= (hsync_pol << ADPA_HSYNC_ACTIVE_SHIFT) |
1074                     (vsync_pol << ADPA_VSYNC_ACTIVE_SHIFT);
1075
1076         /* Connect correct pipe to the analog port DAC */
1077         hw->adpa &= ~(PIPE_MASK << ADPA_PIPE_SELECT_SHIFT);
1078         hw->adpa |= (pipe << ADPA_PIPE_SELECT_SHIFT);
1079
1080         /* Set DPMS state to D0 (on) */
1081         hw->adpa &= ~ADPA_DPMS_CONTROL_MASK;
1082         hw->adpa |= ADPA_DPMS_D0;
1083
1084         hw->adpa |= ADPA_DAC_ENABLE;
1085
1086         *dpll |= (DPLL_VCO_ENABLE | DPLL_VGA_MODE_DISABLE);
1087         *dpll &= ~(DPLL_RATE_SELECT_MASK | DPLL_REFERENCE_SELECT_MASK);
1088         *dpll |= (DPLL_REFERENCE_DEFAULT | DPLL_RATE_SELECT_FP0);
1089
1090         /* Desired clock in kHz */
1091         clock_target = 1000000000 / var->pixclock;
1092
1093         if (calc_pll_params(dinfo->pll_index, clock_target, &m1, &m2,
1094                             &n, &p1, &p2, &clock)) {
1095                 WRN_MSG("calc_pll_params failed\n");
1096                 return 1;
1097         }
1098
1099         /* Check for overflow. */
1100         if (check_overflow(p1, DPLL_P1_MASK, "PLL P1 parameter"))
1101                 return 1;
1102         if (check_overflow(p2, DPLL_P2_MASK, "PLL P2 parameter"))
1103                 return 1;
1104         if (check_overflow(m1, FP_DIVISOR_MASK, "PLL M1 parameter"))
1105                 return 1;
1106         if (check_overflow(m2, FP_DIVISOR_MASK, "PLL M2 parameter"))
1107                 return 1;
1108         if (check_overflow(n, FP_DIVISOR_MASK, "PLL N parameter"))
1109                 return 1;
1110
1111         *dpll &= ~DPLL_P1_FORCE_DIV2;
1112         *dpll &= ~((DPLL_P2_MASK << DPLL_P2_SHIFT) |
1113                    (DPLL_P1_MASK << DPLL_P1_SHIFT));
1114
1115         if (IS_I9XX(dinfo)) {
1116                 *dpll |= (p2 << DPLL_I9XX_P2_SHIFT);
1117                 *dpll |= (1 << (p1 - 1)) << DPLL_P1_SHIFT;
1118         } else {
1119                 *dpll |= (p2 << DPLL_P2_SHIFT) | (p1 << DPLL_P1_SHIFT);
1120         }
1121
1122         *fp0 = (n << FP_N_DIVISOR_SHIFT) |
1123                (m1 << FP_M1_DIVISOR_SHIFT) |
1124                (m2 << FP_M2_DIVISOR_SHIFT);
1125         *fp1 = *fp0;
1126
1127         hw->dvob &= ~PORT_ENABLE;
1128         hw->dvoc &= ~PORT_ENABLE;
1129
1130         /* Use display plane A. */
1131         hw->disp_a_ctrl |= DISPPLANE_PLANE_ENABLE;
1132         hw->disp_a_ctrl &= ~DISPPLANE_GAMMA_ENABLE;
1133         hw->disp_a_ctrl &= ~DISPPLANE_PIXFORMAT_MASK;
1134         switch (intelfb_var_to_depth(var)) {
1135         case 8:
1136                 hw->disp_a_ctrl |= DISPPLANE_8BPP | DISPPLANE_GAMMA_ENABLE;
1137                 break;
1138         case 15:
1139                 hw->disp_a_ctrl |= DISPPLANE_15_16BPP;
1140                 break;
1141         case 16:
1142                 hw->disp_a_ctrl |= DISPPLANE_16BPP;
1143                 break;
1144         case 24:
1145                 hw->disp_a_ctrl |= DISPPLANE_32BPP_NO_ALPHA;
1146                 break;
1147         }
1148         hw->disp_a_ctrl &= ~(PIPE_MASK << DISPPLANE_SEL_PIPE_SHIFT);
1149         hw->disp_a_ctrl |= (pipe << DISPPLANE_SEL_PIPE_SHIFT);
1150
1151         /* Set CRTC registers. */
1152         hactive = var->xres;
1153         hsync_start = hactive + var->right_margin;
1154         hsync_end = hsync_start + var->hsync_len;
1155         htotal = hsync_end + var->left_margin;
1156         hblank_start = hactive;
1157         hblank_end = htotal;
1158
1159         DBG_MSG("H: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
1160                 hactive, hsync_start, hsync_end, htotal, hblank_start,
1161                 hblank_end);
1162
1163         vactive = var->yres;
1164         vsync_start = vactive + var->lower_margin;
1165         vsync_end = vsync_start + var->vsync_len;
1166         vtotal = vsync_end + var->upper_margin;
1167         vblank_start = vactive;
1168         vblank_end = vtotal;
1169         vblank_end = vsync_end + 1;
1170
1171         DBG_MSG("V: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
1172                 vactive, vsync_start, vsync_end, vtotal, vblank_start,
1173                 vblank_end);
1174
1175         /* Adjust for register values, and check for overflow. */
1176         hactive--;
1177         if (check_overflow(hactive, HACTIVE_MASK, "CRTC hactive"))
1178                 return 1;
1179         hsync_start--;
1180         if (check_overflow(hsync_start, HSYNCSTART_MASK, "CRTC hsync_start"))
1181                 return 1;
1182         hsync_end--;
1183         if (check_overflow(hsync_end, HSYNCEND_MASK, "CRTC hsync_end"))
1184                 return 1;
1185         htotal--;
1186         if (check_overflow(htotal, HTOTAL_MASK, "CRTC htotal"))
1187                 return 1;
1188         hblank_start--;
1189         if (check_overflow(hblank_start, HBLANKSTART_MASK, "CRTC hblank_start"))
1190                 return 1;
1191         hblank_end--;
1192         if (check_overflow(hblank_end, HBLANKEND_MASK, "CRTC hblank_end"))
1193                 return 1;
1194
1195         vactive--;
1196         if (check_overflow(vactive, VACTIVE_MASK, "CRTC vactive"))
1197                 return 1;
1198         vsync_start--;
1199         if (check_overflow(vsync_start, VSYNCSTART_MASK, "CRTC vsync_start"))
1200                 return 1;
1201         vsync_end--;
1202         if (check_overflow(vsync_end, VSYNCEND_MASK, "CRTC vsync_end"))
1203                 return 1;
1204         vtotal--;
1205         if (check_overflow(vtotal, VTOTAL_MASK, "CRTC vtotal"))
1206                 return 1;
1207         vblank_start--;
1208         if (check_overflow(vblank_start, VBLANKSTART_MASK, "CRTC vblank_start"))
1209                 return 1;
1210         vblank_end--;
1211         if (check_overflow(vblank_end, VBLANKEND_MASK, "CRTC vblank_end"))
1212                 return 1;
1213
1214         *ht = (htotal << HTOTAL_SHIFT) | (hactive << HACTIVE_SHIFT);
1215         *hb = (hblank_start << HBLANKSTART_SHIFT) |
1216               (hblank_end << HSYNCEND_SHIFT);
1217         *hs = (hsync_start << HSYNCSTART_SHIFT) | (hsync_end << HSYNCEND_SHIFT);
1218
1219         *vt = (vtotal << VTOTAL_SHIFT) | (vactive << VACTIVE_SHIFT);
1220         *vb = (vblank_start << VBLANKSTART_SHIFT) |
1221               (vblank_end << VSYNCEND_SHIFT);
1222         *vs = (vsync_start << VSYNCSTART_SHIFT) | (vsync_end << VSYNCEND_SHIFT);
1223         *ss = (hactive << SRC_SIZE_HORIZ_SHIFT) |
1224               (vactive << SRC_SIZE_VERT_SHIFT);
1225
1226         hw->disp_a_stride = dinfo->pitch;
1227         DBG_MSG("pitch is %d\n", hw->disp_a_stride);
1228
1229         hw->disp_a_base = hw->disp_a_stride * var->yoffset +
1230                           var->xoffset * var->bits_per_pixel / 8;
1231
1232         hw->disp_a_base += dinfo->fb.offset << 12;
1233
1234         /* Check stride alignment. */
1235         stride_alignment = IS_I9XX(dinfo) ? STRIDE_ALIGNMENT_I9XX :
1236                                             STRIDE_ALIGNMENT;
1237         if (hw->disp_a_stride % stride_alignment != 0) {
1238                 WRN_MSG("display stride %d has bad alignment %d\n",
1239                         hw->disp_a_stride, stride_alignment);
1240                 return 1;
1241         }
1242
1243         /* Set the palette to 8-bit mode. */
1244         *pipe_conf &= ~PIPECONF_GAMMA;
1245         return 0;
1246 }
1247
1248 /* Program a (non-VGA) video mode. */
1249 int
1250 intelfbhw_program_mode(struct intelfb_info *dinfo,
1251                      const struct intelfb_hwstate *hw, int blank)
1252 {
1253         int pipe = PIPE_A;
1254         u32 tmp;
1255         const u32 *dpll, *fp0, *fp1, *pipe_conf;
1256         const u32 *hs, *ht, *hb, *vs, *vt, *vb, *ss;
1257         u32 dpll_reg, fp0_reg, fp1_reg, pipe_conf_reg;
1258         u32 hsync_reg, htotal_reg, hblank_reg;
1259         u32 vsync_reg, vtotal_reg, vblank_reg;
1260         u32 src_size_reg;
1261         u32 count, tmp_val[3];
1262
1263         /* Assume single pipe, display plane A, analog CRT. */
1264
1265 #if VERBOSE > 0
1266         DBG_MSG("intelfbhw_program_mode\n");
1267 #endif
1268
1269         /* Disable VGA */
1270         tmp = INREG(VGACNTRL);
1271         tmp |= VGA_DISABLE;
1272         OUTREG(VGACNTRL, tmp);
1273
1274         /* Check whether pipe A or pipe B is enabled. */
1275         if (hw->pipe_a_conf & PIPECONF_ENABLE)
1276                 pipe = PIPE_A;
1277         else if (hw->pipe_b_conf & PIPECONF_ENABLE)
1278                 pipe = PIPE_B;
1279
1280         dinfo->pipe = pipe;
1281
1282         if (pipe == PIPE_B) {
1283                 dpll = &hw->dpll_b;
1284                 fp0 = &hw->fpb0;
1285                 fp1 = &hw->fpb1;
1286                 pipe_conf = &hw->pipe_b_conf;
1287                 hs = &hw->hsync_b;
1288                 hb = &hw->hblank_b;
1289                 ht = &hw->htotal_b;
1290                 vs = &hw->vsync_b;
1291                 vb = &hw->vblank_b;
1292                 vt = &hw->vtotal_b;
1293                 ss = &hw->src_size_b;
1294                 dpll_reg = DPLL_B;
1295                 fp0_reg = FPB0;
1296                 fp1_reg = FPB1;
1297                 pipe_conf_reg = PIPEBCONF;
1298                 hsync_reg = HSYNC_B;
1299                 htotal_reg = HTOTAL_B;
1300                 hblank_reg = HBLANK_B;
1301                 vsync_reg = VSYNC_B;
1302                 vtotal_reg = VTOTAL_B;
1303                 vblank_reg = VBLANK_B;
1304                 src_size_reg = SRC_SIZE_B;
1305         } else {
1306                 dpll = &hw->dpll_a;
1307                 fp0 = &hw->fpa0;
1308                 fp1 = &hw->fpa1;
1309                 pipe_conf = &hw->pipe_a_conf;
1310                 hs = &hw->hsync_a;
1311                 hb = &hw->hblank_a;
1312                 ht = &hw->htotal_a;
1313                 vs = &hw->vsync_a;
1314                 vb = &hw->vblank_a;
1315                 vt = &hw->vtotal_a;
1316                 ss = &hw->src_size_a;
1317                 dpll_reg = DPLL_A;
1318                 fp0_reg = FPA0;
1319                 fp1_reg = FPA1;
1320                 pipe_conf_reg = PIPEACONF;
1321                 hsync_reg = HSYNC_A;
1322                 htotal_reg = HTOTAL_A;
1323                 hblank_reg = HBLANK_A;
1324                 vsync_reg = VSYNC_A;
1325                 vtotal_reg = VTOTAL_A;
1326                 vblank_reg = VBLANK_A;
1327                 src_size_reg = SRC_SIZE_A;
1328         }
1329
1330         /* turn off pipe */
1331         tmp = INREG(pipe_conf_reg);
1332         tmp &= ~PIPECONF_ENABLE;
1333         OUTREG(pipe_conf_reg, tmp);
1334
1335         count = 0;
1336         do {
1337                 tmp_val[count%3] = INREG(0x70000);
1338                 if ((tmp_val[0] == tmp_val[1]) && (tmp_val[1]==tmp_val[2]))
1339                         break;
1340                 count++;
1341                 udelay(1);
1342                 if (count % 200 == 0) {
1343                         tmp = INREG(pipe_conf_reg);
1344                         tmp &= ~PIPECONF_ENABLE;
1345                         OUTREG(pipe_conf_reg, tmp);
1346                 }
1347         } while(count < 2000);
1348
1349         OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
1350
1351         /* Disable planes A and B. */
1352         tmp = INREG(DSPACNTR);
1353         tmp &= ~DISPPLANE_PLANE_ENABLE;
1354         OUTREG(DSPACNTR, tmp);
1355         tmp = INREG(DSPBCNTR);
1356         tmp &= ~DISPPLANE_PLANE_ENABLE;
1357         OUTREG(DSPBCNTR, tmp);
1358
1359         /* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */
1360         mdelay(20);
1361
1362         /* Disable Sync */
1363         tmp = INREG(ADPA);
1364         tmp &= ~ADPA_DPMS_CONTROL_MASK;
1365         tmp |= ADPA_DPMS_D3;
1366         OUTREG(ADPA, tmp);
1367
1368         /* do some funky magic - xyzzy */
1369         OUTREG(0x61204, 0xabcd0000);
1370
1371         /* turn off PLL */
1372         tmp = INREG(dpll_reg);
1373         dpll_reg &= ~DPLL_VCO_ENABLE;
1374         OUTREG(dpll_reg, tmp);
1375
1376         /* Set PLL parameters */
1377         OUTREG(dpll_reg, *dpll & ~DPLL_VCO_ENABLE);
1378         OUTREG(fp0_reg, *fp0);
1379         OUTREG(fp1_reg, *fp1);
1380
1381         /* Enable PLL */
1382         tmp = INREG(dpll_reg);
1383         tmp |= DPLL_VCO_ENABLE;
1384         OUTREG(dpll_reg, tmp);
1385
1386         /* Set DVOs B/C */
1387         OUTREG(DVOB, hw->dvob);
1388         OUTREG(DVOC, hw->dvoc);
1389
1390         /* undo funky magic */
1391         OUTREG(0x61204, 0x00000000);
1392
1393         /* Set ADPA */
1394         OUTREG(ADPA, INREG(ADPA) | ADPA_DAC_ENABLE);
1395         OUTREG(ADPA, (hw->adpa & ~(ADPA_DPMS_CONTROL_MASK)) | ADPA_DPMS_D3);
1396
1397         /* Set pipe parameters */
1398         OUTREG(hsync_reg, *hs);
1399         OUTREG(hblank_reg, *hb);
1400         OUTREG(htotal_reg, *ht);
1401         OUTREG(vsync_reg, *vs);
1402         OUTREG(vblank_reg, *vb);
1403         OUTREG(vtotal_reg, *vt);
1404         OUTREG(src_size_reg, *ss);
1405
1406         /* Enable pipe */
1407         OUTREG(pipe_conf_reg, *pipe_conf | PIPECONF_ENABLE);
1408
1409         /* Enable sync */
1410         tmp = INREG(ADPA);
1411         tmp &= ~ADPA_DPMS_CONTROL_MASK;
1412         tmp |= ADPA_DPMS_D0;
1413         OUTREG(ADPA, tmp);
1414
1415         /* setup display plane */
1416         if (dinfo->pdev->device == PCI_DEVICE_ID_INTEL_830M) {
1417                 /*
1418                  *      i830M errata: the display plane must be enabled
1419                  *      to allow writes to the other bits in the plane
1420                  *      control register.
1421                  */
1422                 tmp = INREG(DSPACNTR);
1423                 if ((tmp & DISPPLANE_PLANE_ENABLE) != DISPPLANE_PLANE_ENABLE) {
1424                         tmp |= DISPPLANE_PLANE_ENABLE;
1425                         OUTREG(DSPACNTR, tmp);
1426                         OUTREG(DSPACNTR,
1427                                hw->disp_a_ctrl|DISPPLANE_PLANE_ENABLE);
1428                         mdelay(1);
1429                 }
1430         }
1431
1432         OUTREG(DSPACNTR, hw->disp_a_ctrl & ~DISPPLANE_PLANE_ENABLE);
1433         OUTREG(DSPASTRIDE, hw->disp_a_stride);
1434         OUTREG(DSPABASE, hw->disp_a_base);
1435
1436         /* Enable plane */
1437         if (!blank) {
1438                 tmp = INREG(DSPACNTR);
1439                 tmp |= DISPPLANE_PLANE_ENABLE;
1440                 OUTREG(DSPACNTR, tmp);
1441                 OUTREG(DSPABASE, hw->disp_a_base);
1442         }
1443
1444         return 0;
1445 }
1446
1447 /* forward declarations */
1448 static void refresh_ring(struct intelfb_info *dinfo);
1449 static void reset_state(struct intelfb_info *dinfo);
1450 static void do_flush(struct intelfb_info *dinfo);
1451
1452 static int
1453 wait_ring(struct intelfb_info *dinfo, int n)
1454 {
1455         int i = 0;
1456         unsigned long end;
1457         u32 last_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
1458
1459 #if VERBOSE > 0
1460         DBG_MSG("wait_ring: %d\n", n);
1461 #endif
1462
1463         end = jiffies + (HZ * 3);
1464         while (dinfo->ring_space < n) {
1465                 dinfo->ring_head = (u8 __iomem *)(INREG(PRI_RING_HEAD) &
1466                                                    RING_HEAD_MASK);
1467                 if (dinfo->ring_tail + RING_MIN_FREE <
1468                     (u32 __iomem) dinfo->ring_head)
1469                         dinfo->ring_space = (u32 __iomem) dinfo->ring_head
1470                                 - (dinfo->ring_tail + RING_MIN_FREE);
1471                 else
1472                         dinfo->ring_space = (dinfo->ring.size +
1473                                              (u32 __iomem) dinfo->ring_head)
1474                                 - (dinfo->ring_tail + RING_MIN_FREE);
1475                 if ((u32 __iomem) dinfo->ring_head != last_head) {
1476                         end = jiffies + (HZ * 3);
1477                         last_head = (u32 __iomem) dinfo->ring_head;
1478                 }
1479                 i++;
1480                 if (time_before(end, jiffies)) {
1481                         if (!i) {
1482                                 /* Try again */
1483                                 reset_state(dinfo);
1484                                 refresh_ring(dinfo);
1485                                 do_flush(dinfo);
1486                                 end = jiffies + (HZ * 3);
1487                                 i = 1;
1488                         } else {
1489                                 WRN_MSG("ring buffer : space: %d wanted %d\n",
1490                                         dinfo->ring_space, n);
1491                                 WRN_MSG("lockup - turning off hardware "
1492                                         "acceleration\n");
1493                                 dinfo->ring_lockup = 1;
1494                                 break;
1495                         }
1496                 }
1497                 udelay(1);
1498         }
1499         return i;
1500 }
1501
1502 static void
1503 do_flush(struct intelfb_info *dinfo) {
1504         START_RING(2);
1505         OUT_RING(MI_FLUSH | MI_WRITE_DIRTY_STATE | MI_INVALIDATE_MAP_CACHE);
1506         OUT_RING(MI_NOOP);
1507         ADVANCE_RING();
1508 }
1509
1510 void
1511 intelfbhw_do_sync(struct intelfb_info *dinfo)
1512 {
1513 #if VERBOSE > 0
1514         DBG_MSG("intelfbhw_do_sync\n");
1515 #endif
1516
1517         if (!dinfo->accel)
1518                 return;
1519
1520         /*
1521          * Send a flush, then wait until the ring is empty.  This is what
1522          * the XFree86 driver does, and actually it doesn't seem a lot worse
1523          * than the recommended method (both have problems).
1524          */
1525         do_flush(dinfo);
1526         wait_ring(dinfo, dinfo->ring.size - RING_MIN_FREE);
1527         dinfo->ring_space = dinfo->ring.size - RING_MIN_FREE;
1528 }
1529
1530 static void
1531 refresh_ring(struct intelfb_info *dinfo)
1532 {
1533 #if VERBOSE > 0
1534         DBG_MSG("refresh_ring\n");
1535 #endif
1536
1537         dinfo->ring_head = (u8 __iomem *) (INREG(PRI_RING_HEAD) &
1538                                            RING_HEAD_MASK);
1539         dinfo->ring_tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK;
1540         if (dinfo->ring_tail + RING_MIN_FREE < (u32 __iomem)dinfo->ring_head)
1541                 dinfo->ring_space = (u32 __iomem) dinfo->ring_head
1542                         - (dinfo->ring_tail + RING_MIN_FREE);
1543         else
1544                 dinfo->ring_space = (dinfo->ring.size +
1545                                      (u32 __iomem) dinfo->ring_head)
1546                         - (dinfo->ring_tail + RING_MIN_FREE);
1547 }
1548
1549 static void
1550 reset_state(struct intelfb_info *dinfo)
1551 {
1552         int i;
1553         u32 tmp;
1554
1555 #if VERBOSE > 0
1556         DBG_MSG("reset_state\n");
1557 #endif
1558
1559         for (i = 0; i < FENCE_NUM; i++)
1560                 OUTREG(FENCE + (i << 2), 0);
1561
1562         /* Flush the ring buffer if it's enabled. */
1563         tmp = INREG(PRI_RING_LENGTH);
1564         if (tmp & RING_ENABLE) {
1565 #if VERBOSE > 0
1566                 DBG_MSG("reset_state: ring was enabled\n");
1567 #endif
1568                 refresh_ring(dinfo);
1569                 intelfbhw_do_sync(dinfo);
1570                 DO_RING_IDLE();
1571         }
1572
1573         OUTREG(PRI_RING_LENGTH, 0);
1574         OUTREG(PRI_RING_HEAD, 0);
1575         OUTREG(PRI_RING_TAIL, 0);
1576         OUTREG(PRI_RING_START, 0);
1577 }
1578
1579 /* Stop the 2D engine, and turn off the ring buffer. */
1580 void
1581 intelfbhw_2d_stop(struct intelfb_info *dinfo)
1582 {
1583 #if VERBOSE > 0
1584         DBG_MSG("intelfbhw_2d_stop: accel: %d, ring_active: %d\n", dinfo->accel,
1585                 dinfo->ring_active);
1586 #endif
1587
1588         if (!dinfo->accel)
1589                 return;
1590
1591         dinfo->ring_active = 0;
1592         reset_state(dinfo);
1593 }
1594
1595 /*
1596  * Enable the ring buffer, and initialise the 2D engine.
1597  * It is assumed that the graphics engine has been stopped by previously
1598  * calling intelfb_2d_stop().
1599  */
1600 void
1601 intelfbhw_2d_start(struct intelfb_info *dinfo)
1602 {
1603 #if VERBOSE > 0
1604         DBG_MSG("intelfbhw_2d_start: accel: %d, ring_active: %d\n",
1605                 dinfo->accel, dinfo->ring_active);
1606 #endif
1607
1608         if (!dinfo->accel)
1609                 return;
1610
1611         /* Initialise the primary ring buffer. */
1612         OUTREG(PRI_RING_LENGTH, 0);
1613         OUTREG(PRI_RING_TAIL, 0);
1614         OUTREG(PRI_RING_HEAD, 0);
1615
1616         OUTREG(PRI_RING_START, dinfo->ring.physical & RING_START_MASK);
1617         OUTREG(PRI_RING_LENGTH,
1618                 ((dinfo->ring.size - GTT_PAGE_SIZE) & RING_LENGTH_MASK) |
1619                 RING_NO_REPORT | RING_ENABLE);
1620         refresh_ring(dinfo);
1621         dinfo->ring_active = 1;
1622 }
1623
1624 /* 2D fillrect (solid fill or invert) */
1625 void
1626 intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y, u32 w, u32 h,
1627                       u32 color, u32 pitch, u32 bpp, u32 rop)
1628 {
1629         u32 br00, br09, br13, br14, br16;
1630
1631 #if VERBOSE > 0
1632         DBG_MSG("intelfbhw_do_fillrect: (%d,%d) %dx%d, c 0x%06x, p %d bpp %d, "
1633                 "rop 0x%02x\n", x, y, w, h, color, pitch, bpp, rop);
1634 #endif
1635
1636         br00 = COLOR_BLT_CMD;
1637         br09 = dinfo->fb_start + (y * pitch + x * (bpp / 8));
1638         br13 = (rop << ROP_SHIFT) | pitch;
1639         br14 = (h << HEIGHT_SHIFT) | ((w * (bpp / 8)) << WIDTH_SHIFT);
1640         br16 = color;
1641
1642         switch (bpp) {
1643         case 8:
1644                 br13 |= COLOR_DEPTH_8;
1645                 break;
1646         case 16:
1647                 br13 |= COLOR_DEPTH_16;
1648                 break;
1649         case 32:
1650                 br13 |= COLOR_DEPTH_32;
1651                 br00 |= WRITE_ALPHA | WRITE_RGB;
1652                 break;
1653         }
1654
1655         START_RING(6);
1656         OUT_RING(br00);
1657         OUT_RING(br13);
1658         OUT_RING(br14);
1659         OUT_RING(br09);
1660         OUT_RING(br16);
1661         OUT_RING(MI_NOOP);
1662         ADVANCE_RING();
1663
1664 #if VERBOSE > 0
1665         DBG_MSG("ring = 0x%08x, 0x%08x (%d)\n", dinfo->ring_head,
1666                 dinfo->ring_tail, dinfo->ring_space);
1667 #endif
1668 }
1669
1670 void
1671 intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
1672                     u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch, u32 bpp)
1673 {
1674         u32 br00, br09, br11, br12, br13, br22, br23, br26;
1675
1676 #if VERBOSE > 0
1677         DBG_MSG("intelfbhw_do_bitblt: (%d,%d)->(%d,%d) %dx%d, p %d bpp %d\n",
1678                 curx, cury, dstx, dsty, w, h, pitch, bpp);
1679 #endif
1680
1681         br00 = XY_SRC_COPY_BLT_CMD;
1682         br09 = dinfo->fb_start;
1683         br11 = (pitch << PITCH_SHIFT);
1684         br12 = dinfo->fb_start;
1685         br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
1686         br22 = (dstx << WIDTH_SHIFT) | (dsty << HEIGHT_SHIFT);
1687         br23 = ((dstx + w) << WIDTH_SHIFT) |
1688                ((dsty + h) << HEIGHT_SHIFT);
1689         br26 = (curx << WIDTH_SHIFT) | (cury << HEIGHT_SHIFT);
1690
1691         switch (bpp) {
1692         case 8:
1693                 br13 |= COLOR_DEPTH_8;
1694                 break;
1695         case 16:
1696                 br13 |= COLOR_DEPTH_16;
1697                 break;
1698         case 32:
1699                 br13 |= COLOR_DEPTH_32;
1700                 br00 |= WRITE_ALPHA | WRITE_RGB;
1701                 break;
1702         }
1703
1704         START_RING(8);
1705         OUT_RING(br00);
1706         OUT_RING(br13);
1707         OUT_RING(br22);
1708         OUT_RING(br23);
1709         OUT_RING(br09);
1710         OUT_RING(br26);
1711         OUT_RING(br11);
1712         OUT_RING(br12);
1713         ADVANCE_RING();
1714 }
1715
1716 int
1717 intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg, u32 w,
1718                        u32 h, const u8* cdat, u32 x, u32 y, u32 pitch, u32 bpp)
1719 {
1720         int nbytes, ndwords, pad, tmp;
1721         u32 br00, br09, br13, br18, br19, br22, br23;
1722         int dat, ix, iy, iw;
1723         int i, j;
1724
1725 #if VERBOSE > 0
1726         DBG_MSG("intelfbhw_do_drawglyph: (%d,%d) %dx%d\n", x, y, w, h);
1727 #endif
1728
1729         /* size in bytes of a padded scanline */
1730         nbytes = ROUND_UP_TO(w, 16) / 8;
1731
1732         /* Total bytes of padded scanline data to write out. */
1733         nbytes = nbytes * h;
1734
1735         /*
1736          * Check if the glyph data exceeds the immediate mode limit.
1737          * It would take a large font (1K pixels) to hit this limit.
1738          */
1739         if (nbytes > MAX_MONO_IMM_SIZE)
1740                 return 0;
1741
1742         /* Src data is packaged a dword (32-bit) at a time. */
1743         ndwords = ROUND_UP_TO(nbytes, 4) / 4;
1744
1745         /*
1746          * Ring has to be padded to a quad word. But because the command starts
1747            with 7 bytes, pad only if there is an even number of ndwords
1748          */
1749         pad = !(ndwords % 2);
1750
1751         tmp = (XY_MONO_SRC_IMM_BLT_CMD & DW_LENGTH_MASK) + ndwords;
1752         br00 = (XY_MONO_SRC_IMM_BLT_CMD & ~DW_LENGTH_MASK) | tmp;
1753         br09 = dinfo->fb_start;
1754         br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
1755         br18 = bg;
1756         br19 = fg;
1757         br22 = (x << WIDTH_SHIFT) | (y << HEIGHT_SHIFT);
1758         br23 = ((x + w) << WIDTH_SHIFT) | ((y + h) << HEIGHT_SHIFT);
1759
1760         switch (bpp) {
1761         case 8:
1762                 br13 |= COLOR_DEPTH_8;
1763                 break;
1764         case 16:
1765                 br13 |= COLOR_DEPTH_16;
1766                 break;
1767         case 32:
1768                 br13 |= COLOR_DEPTH_32;
1769                 br00 |= WRITE_ALPHA | WRITE_RGB;
1770                 break;
1771         }
1772
1773         START_RING(8 + ndwords);
1774         OUT_RING(br00);
1775         OUT_RING(br13);
1776         OUT_RING(br22);
1777         OUT_RING(br23);
1778         OUT_RING(br09);
1779         OUT_RING(br18);
1780         OUT_RING(br19);
1781         ix = iy = 0;
1782         iw = ROUND_UP_TO(w, 8) / 8;
1783         while (ndwords--) {
1784                 dat = 0;
1785                 for (j = 0; j < 2; ++j) {
1786                         for (i = 0; i < 2; ++i) {
1787                                 if (ix != iw || i == 0)
1788                                         dat |= cdat[iy*iw + ix++] << (i+j*2)*8;
1789                         }
1790                         if (ix == iw && iy != (h-1)) {
1791                                 ix = 0;
1792                                 ++iy;
1793                         }
1794                 }
1795                 OUT_RING(dat);
1796         }
1797         if (pad)
1798                 OUT_RING(MI_NOOP);
1799         ADVANCE_RING();
1800
1801         return 1;
1802 }
1803
1804 /* HW cursor functions. */
1805 void
1806 intelfbhw_cursor_init(struct intelfb_info *dinfo)
1807 {
1808         u32 tmp;
1809
1810 #if VERBOSE > 0
1811         DBG_MSG("intelfbhw_cursor_init\n");
1812 #endif
1813
1814         if (dinfo->mobile || IS_I9XX(dinfo)) {
1815                 if (!dinfo->cursor.physical)
1816                         return;
1817                 tmp = INREG(CURSOR_A_CONTROL);
1818                 tmp &= ~(CURSOR_MODE_MASK | CURSOR_MOBILE_GAMMA_ENABLE |
1819                          CURSOR_MEM_TYPE_LOCAL |
1820                          (1 << CURSOR_PIPE_SELECT_SHIFT));
1821                 tmp |= CURSOR_MODE_DISABLE;
1822                 OUTREG(CURSOR_A_CONTROL, tmp);
1823                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1824         } else {
1825                 tmp = INREG(CURSOR_CONTROL);
1826                 tmp &= ~(CURSOR_FORMAT_MASK | CURSOR_GAMMA_ENABLE |
1827                          CURSOR_ENABLE | CURSOR_STRIDE_MASK);
1828                 tmp = CURSOR_FORMAT_3C;
1829                 OUTREG(CURSOR_CONTROL, tmp);
1830                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.offset << 12);
1831                 tmp = (64 << CURSOR_SIZE_H_SHIFT) |
1832                       (64 << CURSOR_SIZE_V_SHIFT);
1833                 OUTREG(CURSOR_SIZE, tmp);
1834         }
1835 }
1836
1837 void
1838 intelfbhw_cursor_hide(struct intelfb_info *dinfo)
1839 {
1840         u32 tmp;
1841
1842 #if VERBOSE > 0
1843         DBG_MSG("intelfbhw_cursor_hide\n");
1844 #endif
1845
1846         dinfo->cursor_on = 0;
1847         if (dinfo->mobile || IS_I9XX(dinfo)) {
1848                 if (!dinfo->cursor.physical)
1849                         return;
1850                 tmp = INREG(CURSOR_A_CONTROL);
1851                 tmp &= ~CURSOR_MODE_MASK;
1852                 tmp |= CURSOR_MODE_DISABLE;
1853                 OUTREG(CURSOR_A_CONTROL, tmp);
1854                 /* Flush changes */
1855                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1856         } else {
1857                 tmp = INREG(CURSOR_CONTROL);
1858                 tmp &= ~CURSOR_ENABLE;
1859                 OUTREG(CURSOR_CONTROL, tmp);
1860         }
1861 }
1862
1863 void
1864 intelfbhw_cursor_show(struct intelfb_info *dinfo)
1865 {
1866         u32 tmp;
1867
1868 #if VERBOSE > 0
1869         DBG_MSG("intelfbhw_cursor_show\n");
1870 #endif
1871
1872         dinfo->cursor_on = 1;
1873
1874         if (dinfo->cursor_blanked)
1875                 return;
1876
1877         if (dinfo->mobile || IS_I9XX(dinfo)) {
1878                 if (!dinfo->cursor.physical)
1879                         return;
1880                 tmp = INREG(CURSOR_A_CONTROL);
1881                 tmp &= ~CURSOR_MODE_MASK;
1882                 tmp |= CURSOR_MODE_64_4C_AX;
1883                 OUTREG(CURSOR_A_CONTROL, tmp);
1884                 /* Flush changes */
1885                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1886         } else {
1887                 tmp = INREG(CURSOR_CONTROL);
1888                 tmp |= CURSOR_ENABLE;
1889                 OUTREG(CURSOR_CONTROL, tmp);
1890         }
1891 }
1892
1893 void
1894 intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y)
1895 {
1896         u32 tmp;
1897
1898 #if VERBOSE > 0
1899         DBG_MSG("intelfbhw_cursor_setpos: (%d, %d)\n", x, y);
1900 #endif
1901
1902         /*
1903          * Sets the position. The coordinates are assumed to already
1904          * have any offset adjusted. Assume that the cursor is never
1905          * completely off-screen, and that x, y are always >= 0.
1906          */
1907
1908         tmp = ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) |
1909               ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
1910         OUTREG(CURSOR_A_POSITION, tmp);
1911
1912         if (IS_I9XX(dinfo)) {
1913                 OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
1914         }
1915 }
1916
1917 void
1918 intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg, u32 fg)
1919 {
1920 #if VERBOSE > 0
1921         DBG_MSG("intelfbhw_cursor_setcolor\n");
1922 #endif
1923
1924         OUTREG(CURSOR_A_PALETTE0, bg & CURSOR_PALETTE_MASK);
1925         OUTREG(CURSOR_A_PALETTE1, fg & CURSOR_PALETTE_MASK);
1926         OUTREG(CURSOR_A_PALETTE2, fg & CURSOR_PALETTE_MASK);
1927         OUTREG(CURSOR_A_PALETTE3, bg & CURSOR_PALETTE_MASK);
1928 }
1929
1930 void
1931 intelfbhw_cursor_load(struct intelfb_info *dinfo, int width, int height,
1932                       u8 *data)
1933 {
1934         u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
1935         int i, j, w = width / 8;
1936         int mod = width % 8, t_mask, d_mask;
1937
1938 #if VERBOSE > 0
1939         DBG_MSG("intelfbhw_cursor_load\n");
1940 #endif
1941
1942         if (!dinfo->cursor.virtual)
1943                 return;
1944
1945         t_mask = 0xff >> mod;
1946         d_mask = ~(0xff >> mod);
1947         for (i = height; i--; ) {
1948                 for (j = 0; j < w; j++) {
1949                         writeb(0x00, addr + j);
1950                         writeb(*(data++), addr + j+8);
1951                 }
1952                 if (mod) {
1953                         writeb(t_mask, addr + j);
1954                         writeb(*(data++) & d_mask, addr + j+8);
1955                 }
1956                 addr += 16;
1957         }
1958 }
1959
1960 void
1961 intelfbhw_cursor_reset(struct intelfb_info *dinfo) {
1962         u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
1963         int i, j;
1964
1965 #if VERBOSE > 0
1966         DBG_MSG("intelfbhw_cursor_reset\n");
1967 #endif
1968
1969         if (!dinfo->cursor.virtual)
1970                 return;
1971
1972         for (i = 64; i--; ) {
1973                 for (j = 0; j < 8; j++) {
1974                         writeb(0xff, addr + j+0);
1975                         writeb(0x00, addr + j+8);
1976                 }
1977                 addr += 16;
1978         }
1979 }