trivial: remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: Fix duplicated word "options" in comment

this was introduced in

5e0a093 (tracing: fix config options to not show when automatically selected)

Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: trivial@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: kbuild: remove extraneous blank line after declaration of usage()

Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: improve help text for mm debug config options

Improve the help text for PAGE_POISONING.
Also fix some typos and improve consistency within the file.

Signed-of-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: doc: hpfall: accept disk device to unload as argument

Allows users who use an IDE driver for their disk to use hpfall without
having to modify the source. By default /dev/sda is used.
Suggested by Christian Thaeter in http://lkml.org/lkml/2009/3/25/505.

While we're add it, improve error message if opening /dev/freefall fails.

Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Christian Thaeter <ct@pipapo.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: doc: hpfall: reduce risk that hpfall can do harm

Improve the example code to be at least useable, as in not causing
harm (as shown below). Code can still be improved further, but this
adds some basic safeguards.

1. hpfall *MUST* mlockall(MCL_CURRENT|MCL_FUTURE); itself!
Since the Program sits and waits most of the time it becomes very likely
swapped out. If it gets woken up when the laptop drops from the table
while it is swapped out it actually triggers harddrive activity!

2. Daemonize hpfall using 'daemon(0,0)' (quick and dirty).

3. Give hpfall realtime priority.
Should give a chance that it has less latency when woken up.

Signed-off-by: Christian Thaeter <ct@pipapo.org>
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: SubmittingPatches: Fix reference to renumbered step

This patch fixes a reference to step "Select e-mail destination." which
has been renumbered from 4) to 5) in linux-2.6.22.

Signed-off-by: Michael Brunner <mibru@gmx.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: fix typos "man[ae]g?ment" -> "management"

Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: media/video/cx88: add __init/__exit macros to cx88 drivers

Trivial patch which adds the __init and __exit macros to the module_init /
module_exit functions to several files in drivers/media/video/cx88/

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: fix typo in CONFIG_DEBUG_FS in gcov doc

The correct name is CONFIG_DEBUG_FS, add the missing underscore.

Signed-off-by: Marton Nemeth <nm127@freemail.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: fix missing printk space in amd_k7_smp_check

This trivial patch fixes one missing space in printk.

I already fixed it about half a year ago or more, but the change (in
arch/x86/kernel/cpu/smpboot.c at that time) didn't made into
mainline yet.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
index 28e5f59..6c139ed 100644
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: fix typo s/ketymap/keymap/ in comment

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: fix typo "to to" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: fix typos in comments s/DGBU/DBGU/

DBGU means Debug Unit, was refered as "DGBU" in some files. Fixed to "DBGU".

Signed-off-by: Samuel R. C. Vale <srcvale@holoscopio.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: media/omap: adding __init/__exit macros to lcd_drivers

Trivial patch which adds the __init and __exit macros to the module_init /
module_exit functions to several files in drivers/video/omap/

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: fix typo "for for" in multiple files

trivial: fix typo "for for" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: Remove commented out usage of dead MODULE_PARM() in swarm_cs4297a

Get rid of that commented usage of the now defunct MODULE_PARM macro.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: doc: document missing value 2 for randomize-va-space

The documentation for /proc/sys/kernel/* does not mention the possible
value 2 for randomize-va-space yet.  While being there, doing some
reformatting, fixing grammar problems and clarifying the correlations
between randomize-va-space, kernel parameter "norandmaps" and the
CONFIG_COMPAT_BRK option.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: mtd: add __init/__exit macros to init/exitfunctions

Trivial patch which adds the __init and __exit macros to the module_init /
module_exit functions to the following modules from drivers/mtd/
 devices/m25p80.c
 devices/slram.c
 linux version 2.6.30
 ftl.c
 nand/cafe_nand.c
 nand/cmx270_nand.c

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: Correct print_tainted routine name in comment

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Change "useing" -> "using".

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: cleanup hpfall example code (checkpatch)

This patch makes hpfall.c conform to kernel coding style.

I have not fixed the C99 // comments on two lines as they
help indicate that those are not actually comments but
incomplete code.

Before:
 total: 10 errors, 6 warnings, 101 lines checked
After:
 total: 2 errors, 0 warnings, 99 lines checked

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: update the Kernel Janitors' web-page URL

The former address cannot be resolved.

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: remove references to non-existent include/linux/config.h

Ignore drivers/staging/ since it is very likely that new drivers
introduce it again.

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: add __init/__exit macros to DAC960.c

Trivial patch which adds the __init and __exit macros to the module_init /
module_exit functions from drivers/block/DAC960.c

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: OHCI: Fix typo in a comment

trivial: OHCI: Fix typo in a comment

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: fix typo in namei.h comment

Signed-off-by: Ori Avtalion <ori@avtalion.name>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

trivial: change address of the libcap source.

This is patch to change ftp site of the libcap source.
"ftp://linux.kernel.org" address does not exist.

Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge git://git./linux/kernel/git/jaswinder/linux-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6:
  includecheck fix: x86, cpu/common.c
  includecheck fix: kernel/trace, ring_buffer.c
  includecheck fix: include/linux, ftrace.h
  includecheck fix: include/linux, page_cgroup.h
  includecheck fix: include/linux, aio.h
  includecheck fix: include/drm, drm_memory.h
  includecheck fix: include/acpi, acpi_bus.h
  includecheck fix: drivers/xen, evtchn.c
  includecheck fix: drivers/video, vgacon.c
  includecheck fix: drivers/scsi, ibmvscsi.c
  includecheck fix: drivers/scsi, libfcoe.c
  includecheck fix: x86, shadow.c
  includecheck fix: x86, traps.c
  includecheck fix: um, helper.c
  includecheck fix: s390, sys_s390.c

loongson: fix cut-and-paste mis-merge

Ingo points out that I screwed up when merging the 'timers-for-linus'
branch in commit a03fdb7612874834d6847107198712d18b5242c7.

A bit too much copy-and-pasting caused the end result to have an
extraneous 'return' in the middle of an expression.  That was obviously
bogus.  Blush.

Reported-by-with-patch: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux

* 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux:
  [PATCH] i2c-imx: make bus available early
  i2c-mv64xxx: correct mv64xxx_i2c_intr() return type

Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Driver-Core: extend devnode callbacks to provide permissions

Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (79 commits)
  USB serial: update the console driver
  usb-serial: straighten out serial_open
  usb-serial: add missing tests and debug lines
  usb-serial: rename subroutines
  usb-serial: fix termios initialization logic
  usb-serial: acquire references when a new tty is installed
  usb-serial: change logic of serial lookups
  usb-serial: put subroutines in logical order
  usb-serial: change referencing of port and serial structures
  tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl
  tty: Char: mxser, add support for CP112UL
  uartlite: support shared interrupt lines
  tty: USB: serial/mct_u232, fix tty refcnt
  tty: riscom8, fix tty refcnt
  tty: riscom8, fix shutdown declaration
  TTY: fix typos
  tty: Power: fix suspend vt regression
  tty: vt: use printk_once
  tty: handle VT specific compat ioctls in vt driver
  n_tty: move echoctl check and clean up logic
  ...

Merge branch 'perfcounters-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (58 commits)
  perf_counter: Fix perf_copy_attr() pointer arithmetic
  perf utils: Use a define for the maximum length of a trace event
  perf: Add timechart help text and add timechart to "perf help"
  tracing, x86, cpuidle: Move the end point of a C state in the power tracer
  perf utils: Be consistent about minimum text size in the svghelper
  perf timechart: Add "perf timechart record"
  perf: Add the timechart tool
  perf: Add a SVG helper library file
  tracing, perf: Convert the power tracer into an event tracer
  perf: Add a sample_event type to the event_union
  perf: Allow perf utilities to have "callback" options without arguments
  perf: Store trace event name/id pairs in perf.data
  perf: Add a timestamp to fork events
  sched_clock: Make it NMI safe
  perf_counter: Fix up swcounter throttling
  x86, perf_counter, bts: Optimize BTS overflow handling
  perf sched: Add --input=file option to builtin-sched.c
  perf trace: Sample timestamp and cpu when using record flag
  perf tools: Increase MAX_EVENT_LENGTH
  perf tools: Fix memory leak in read_ftrace_printk()
  ...

includecheck fix: x86, cpu/common.c

fix the following 'make includecheck' warning:

  arch/x86/kernel/cpu/common.c: linux/smp.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1252087783.6385.10.camel@ht.satnam>

includecheck fix: kernel/trace, ring_buffer.c

fix the following 'make includecheck' warning:

  kernel/trace/ring_buffer.c: trace.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068617.4382.107.camel@ht.satnam>

includecheck fix: include/linux, ftrace.h

fix the following 'make includecheck' warning:

  include/linux/ftrace.h: linux/sched.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068321.4382.102.camel@ht.satnam>

includecheck fix: include/linux, page_cgroup.h

fix the following 'make includecheck' warning:

  include/linux/page_cgroup.h: linux/swap.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>

includecheck fix: include/linux, aio.h

fix the following 'make includecheck' warning:

  include/linux/aio.h: linux/aio_abi.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: bcrl@kvack.org
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068254.4382.101.camel@ht.satnam>

includecheck fix: include/drm, drm_memory.h

fix the following 'make includecheck' warning:

  include/drm/drm_memory.h: linux/vmalloc.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068169.4382.99.camel@ht.satnam>
Acked-by: Dave Airlie <airlied@redhat.com>

includecheck fix: include/acpi, acpi_bus.h

fix the following 'make includecheck' warning:

  include/acpi/acpi_bus.h: linux/device.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068058.4382.96.camel@ht.satnam>
Acked-by: Len Brown <len.brown@intel.com>

includecheck fix: drivers/xen, evtchn.c

fix the following 'make includecheck' warning:

  drivers/xen/evtchn.c: linux/errno.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: chrisw@sous-sol.org
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247067749.4382.90.camel@ht.satnam>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

includecheck fix: drivers/video, vgacon.c

fix the following 'make includecheck' warning:

  drivers/video/console/vgacon.c: linux/slab.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Martin Mares <mj@ucw.cz>
Cc: mchehab@infradead.org
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247067624.4382.88.camel@ht.satnam>

includecheck fix: drivers/scsi, ibmvscsi.c

fix the following 'make includecheck' warning:

  drivers/scsi/ibmvscsi/ibmvscsi.c: asm/firmware.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247067016.4382.78.camel@ht.satnam>
Acked-by: Brian King <brking@linux.vnet.ibm.com>

includecheck fix: drivers/scsi, libfcoe.c

fix the following 'make includecheck' warning:

  drivers/scsi/fcoe/libfcoe.c: linux/netdevice.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247066936.4382.76.camel@ht.satnam>

includecheck fix: x86, shadow.c

fix the following 'make includecheck' warning:

  arch/x86/mm/kmemcheck/shadow.c: linux/module.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247065179.4382.51.camel@ht.satnam>

includecheck fix: x86, traps.c

fix the following 'make includecheck' warning:

  arch/x86/kernel/traps.c: asm/traps.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247065094.4382.49.camel@ht.satnam>

includecheck fix: um, helper.c

fix the following 'make includecheck' warning:

  arch/um/os-Linux/helper.c: linux/limits.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: jdike@addtoit.com
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247064950.4382.45.camel@ht.satnam>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>

includecheck fix: s390, sys_s390.c

fix the following 'make includecheck' warning:

  arch/s390/kernel/sys_s390.c: linux/syscalls.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068809.4382.111.camel@ht.satnam>

[PATCH] i2c-imx: make bus available early

As I2C is used by PMICs also, make the busses available early via
subsys_initcall().

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

i2c-mv64xxx: correct mv64xxx_i2c_intr() return type

The mv64xxx_i2c_intr() irq handler in drivers/i2c/busses/i2c-mv64xxx.c
is declared as returning 'int', resulting in this compile-time warning:

drivers/i2c/busses/i2c-mv64xxx.c: In function 'mv64xxx_i2c_probe':
drivers/i2c/busses/i2c-mv64xxx.c:540: warning: passing argument 2 of 'request_irq' from incompatible pointer type

Fix: correct the return type to 'irqreturn_t'.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

USB serial: update the console driver

This patch (as1292) modifies the USB serial console driver, to make it
compatible with the recent changes to the USB serial core.  The most
important change is that serial->disc_mutex now has to be unlocked
following a successful call to usb_serial_get_by_index().

Other less notable changes include:

Use the requested port number instead of port 0 always.

Prevent the serial device from being autosuspended.

Use the ASYNCB_INITIALIZED flag bit to indicate when the
port hardware has been initialized.

In spite of these changes, there's no question that the USB serial
console code is still a big hack.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-serial: straighten out serial_open

This patch (as1291) removes a bunch of code from serial_open(), things
that were rendered unnecessary by earlier patches.  A missing spinlock
is added to protect port->port.count, which needs to be incremented
even if the open fails but not if the tty has gotten a hangup.  The
test for whether the hardware has been initialized, based on the use
count, is replaced by a more transparent test of the
ASYNCB_INITIALIZED bit in the port flags.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-serial: add missing tests and debug lines

This patch (as1290) adds some missing tests.  serial_down() isn't
supposed to do anything if the hardware hasn't been initialized, and
serial_close() isn't supposed to do anything if the tty has gotten a
hangup (because serial_hangup() takes care of shutting down the
hardware).

The patch also updates and adds a few debugging lines.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-serial: rename subroutines

This patch (as1289) renames serial_do_down() to serial_down() and
serial_do_free() to serial_release().  It also adds a missing call to
tty_shutdown() in serial_release().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-serial: fix termios initialization logic

This patch (as1288) fixes the initialization logic in
serial_install().  A new tty always needs to have a termios
initialized no matter what, not just in the case where the lower
driver will override the termios settings.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-serial: acquire references when a new tty is installed

This patch (as1287) makes serial_install() be reponsible for acquiring
references to the usb_serial structure and the driver module when a
tty is first used.  This is more sensible than having serial_open() do
it, because a tty can be opened many times whereas it is installed
only once, when it is created.  (Not to mention that these actions are
reversed when the tty is released, not when it is closed.)  Finally,
it is at install time that the TTY core takes its own reference to the
usb_serial module, so it is only fitting that we should act the same
way in regard to the lower-level serial driver.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-serial: change logic of serial lookups

This patch (as1286) changes usb_serial_get_by_index().  Now the
routine will check whether the serial device has been disconnected; if
it has then the return value will be NULL.  If the device hasn't been
disconnected then the routine will return with serial->disc_mutex
held, so that the caller can use the structure without fear of racing
against driver unloads.

This permits the scope of table_mutex in destroy_serial() to be
reduced.  Instead of protecting the entire function, it suffices to
protect the part that actually uses serial_table[], i.e., the call to
return_serial().  There's no longer any danger of the refcount being
incremented after it reaches 0 (which was the reason for having the
large scope previously), because it can't reach 0 until the serial
device has been disconnected.

Also, the patch makes serial_install() check that serial is non-NULL
before attempting to use it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-serial: put subroutines in logical order

This patch (as1285) rearranges the subroutines in usb-serial.c
concerned with tty lifetimes into a more logical order: install, open,
hangup, close, release.  It also updates the formatting of the
kerneldoc comments.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-serial: change referencing of port and serial structures

This patch (as1284) changes the referencing of the usb_serial and
usb_serial_port structures in usb-serial.c.  It's not feasible to make
the port structures keep a reference to the serial structure, because
the ports need to remain in existence when serial is released -- quite
a few of the drivers expect this.  Consequently taking a reference
to the port when the device file is open is insufficient; such a
reference would not pin serial.

To fix this, we now take a reference to serial when the device file is
opened.  The final put_device() for the ports occurs in
destroy_serial(), so that the ports will last as long as they are
needed.

The patch initializes all the port devices, including those in the
unused "fake" ports.  This makes the code more uniform because they
can all be released in the same way.  The error handling code in
usb_serial_probe() is much simplified by this approach; instead of
freeing everything by hand we can use a single usb_serial_put() call.

Also simplified is the port-release mechanism.  Instead of being two
separate routines, port_release() and port_free() can be combined into
one.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl

In moxa specific ASPP_OQUEUE ioctl command, they apparently want
only know whether there is space in transmitter hold register.

So switch UART_LSR_TEMT to UART_LSR_THRE in that specific case
according to the change in 1.14 moxa drivers.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: Char: mxser, add support for CP112UL

Add support for MOXA:0x1120 pci device. It's a 2-port device and differs
in no way from the others. So this turns out to be a trivial
pci_device_id change.

Increase also the version number.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

uartlite: support shared interrupt lines

Adapt isr to work with shared interrupt lines.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: USB: serial/mct_u232, fix tty refcnt

Stanse found a tty refcnt leak in read_int_callback. In fact
it's handled wrong altogether. tty_port_tty_get can return NULL
and it's not checked in that manner.

Fix that by checking the tty_port_tty_get retval and put tty kref
properly.

http://stanse.fi.muni.cz/

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: riscom8, fix tty refcnt

Stanse found a tty refcnt leak on one fail path in rc_transmit.
Fix that by jumping to the 'out' label.

http://stanse.fi.muni.cz/

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: riscom8, fix shutdown declaration

tty_port_ops.shutdown takes only one parameter: tty port. Remove
the second one and use port->tty where needed instead.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

TTY: fix typos

This patch (as1282) fixes some obvious typos in the TTY core.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: Power: fix suspend vt regression

vt_waitactive no longer accepts console parameter as console-1
since commit "vt: add an event interface". It expects console
number directly (as viewed by userspace -- counting from 1).

Fix a deadlock suspend regression by redefining adding one
to vt in vt_move_to_console.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: vt: use printk_once

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: handle VT specific compat ioctls in vt driver

The VT specific compat_ioctl handlers are the only ones
in common code that require the BKL. Moving them into
the vt driver lets us remove the BKL from the other handlers
and cleans up the code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

n_tty: move echoctl check and clean up logic

Check L_ECHOCTL before insertting a character in the echo buffer
(rather than as the buffer is processed), to be more consistent with
when all other L_ flags are checked.  Also cleaned up the related logic.

Note that this and the previous patch ("n_tty: honor opost flag for echoes")
were verified together by the reporters of the bug that patch addresses
(http://bugs.linuxbase.org/show_bug.cgi?id=2692), and the test now passes.

Signed-off-by: Joe Peterson <joe@skyrush.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

n_tty: honor opost flag for echoes

Fixes the following bug:

      http://bugs.linuxbase.org/show_bug.cgi?id=2692

Causes processing of echoed characters (output from the echo buffer) to
honor the O_OPOST flag, which is consistent with the old behavior.

Note that this and the next patch ("n_tty: move echoctl check and
clean up logic") were verified together by the bug reporters, and
the test now passes.

Signed-off-by: Joe Peterson <joe@skyrush.com>
Cc: Linux Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: USB serial termios bits

Various drivers have hacks to mangle termios structures. This stems from
the fact there is no nice setup hook for configuring the termios settings
when the port is created

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Set proper console speed on resume if console suspend is disabled

Commit b5b82df6, from May 2007, breaks no_console_suspend on the OLPC
XO laptop. Basically what happens is that upon returning from resume,
serial8250_resume_port() will reconfigure the port for high speed
mode and all console output will be garbled, making debug of the
resume path painful. This patch modifies uart_resume_port() to
reset the port to the state it was in before we suspended.

Original patch by Marcelo Tosatti

Second patch by Deepak then reworked by Alan to fit with the tty changes
before it got submitted. Also fixed the console path to set c_i/ospeed as
some drivers require the termios fields are valid

Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

serial: introduce tty krefs

Initially just use the helper and thus krefs when we set and clear the
port values.

Signed-off-by: Alan Cox <alan@linux.intel.com>

serial: kill USF_CLOSING_* definitions

The serial layer for some reason uses different defines for the special
case close delays and then conditionally switches to/from the normal ones
in the ioctls.

Remove this rather pointless abstraction

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

serial: move port users helper

This little helper is now tty_port specific and useful generally so move it

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

serial: move delta_msr_wait into the tty_port

This is used by various drivers not just serial and can be extracted
as commonality

Signed-off-by: Alan Cox <alan@linux.intel.com>

serial: replace the state mutex with the tty port mutex

They cover essentially the same stuff and we can therefore fold it into the
tty_port one.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

serial: kill off uif_t

This typedef is now extinct

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

serial: move the flags into the tty_port field

Fortunately the serial layer was designed to use the same flag values but
with different names. It has its own SUSPENDED flag which is a free slot in
the ASYNC flags so we allocate it in the ASYNC flags instead.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

serial: move count into the tty_port version

Remove more stuff from the serial special case code

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

serial: use tty_port pointers in the core code

Extract out a lot of the x.port. uses and also show up where there are
things left to be isolated that prevent use using the port helpers in the
serial layer at this point

Signed-off-by: Alan Cox <alan@linux.intel.com>

serial: Fold closing_* fields into the tty_port ones

Remove some more serial specific use

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

serial: kill off uart_info

We moved this into uart_state, now move the fields out of the separate
structure and kill it off.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

isicom: split the open method for the isicom device

Again moving towards being able to add a common open method

Signed-off-by: Alan Cox <alan@linux.intel.com>

tty: USB does not need the filp argument in the drivers

And indeed none of them use it. Clean this up as it will make moving to a
standard open method rather easier.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

vt: add an activate and lock

X and other graphical interfaces need to be able to flip to a console
and lock it into graphics mode without races.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

vt: move kernel stuff out of vt.h

We have vt_kern.h for this

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

vt: remove power stuff from kernel/power

In the past someone gratuitiously borrowed chunks of kernel internal vt
code and dumped them in kernel/power. They have all sorts of deep relations
with the vt code so put them in the vt tree instead

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

vt: add an event interface

This is needed and requested in various forms for ConsoleKit, screenblank
handling and the like so do the job with a single interface. Also build the
interface so that unlike VT_WAITACTIVE and friends it won't miss events.

FIXME: Should this be a waitactive ioctl or a new device file you can poll
and read events from. We need the code anyway to fix up the existing broken
wait for console switch logic but the ConsoleKit people would prefer the
new device to the ioctl we have here

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: USB can now use the shutdown method for kref based freeing of ports

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: remove dtr/rts use from the driver open methods

These are handled by the tty_port core code which will raise and lower the
carrier correctly in tty_wait_until_ready

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: USB hangup is racy

The USB layer uses tty_hangup to deal with unplugs of the physical hardware
(analogous to loss of carrier) and then frees the resources. However the
tty_hangup is asynchronous. As the hangup can sleep we can use tty_vhangup
which is the non async version to avoid freeing resources too early.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cdc_acm: Fix to use modern speed interfaces

This changed in 2006 so its about time the ACM driver caught up

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: make the kref destructor occur asynchronously

We want to be able to sleep in the destructor for USB at least. It isn't a
hot path so just pushing it to a work queue doesn't really cause any
difficulty.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

cyclades: use the full port_close function

Convert cyclades to use the full tty_port_close helper

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

tty: riscom8 kref and tty_port_close

We need to kref this driver in order to use port_close

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

isicom: Split the close hardware bits out

Start to extract and build a model for a common tty_port_close()

Signed-off-by: Alan Cox <alan@linux.intel.com>

mxser: Split close ready for a standard tty_port_close method

Prepare for the tty_port_close function by splitting out methods

Signed-off-by: Alan Cox <alan@linux.intel.com>