<para>
The blocks in which the tables are stored are procteted against
accidental access by marking them bad in the memory bad block
- table. The bad block table managment functions are allowed
+ table. The bad block table management functions are allowed
to circumvernt this protection.
</para>
<para>
<para>
The SAS transport class contains common code to deal with SAS HBAs,
an aproximated representation of SAS topologies in the driver model,
- and various sysfs attributes to expose these topologies and managment
+ and various sysfs attributes to expose these topologies and management
interfaces to userspace.
</para>
<para>
v. Remove redundant __megaraid_busywait_mbox routine
-vi. Fix bug in the managment module, which causes a system lockup when the
+vi. Fix bug in the management module, which causes a system lockup when the
IO module is loaded and then unloaded, followed by executing any
management utility. The current version of management module does not
handle the adapter unregister properly.
STAC92HD83*
===========
ref Reference board
- mic-ref Reference board with power managment for ports
+ mic-ref Reference board with power management for ports
dell-s14 Dell laptop
auto BIOS setup (default)
than requested, the rest of the page will be used,
making the actual allocation bigger than requested.
( Note, the size may not be a multiple of the page size
- due to buffer managment overhead. )
+ due to buffer management overhead. )
This can only be updated when the current_tracer
is set to "nop".
# Select a platform tht is kept up-to-date
KBUILD_DEFCONFIG := versatile_defconfig
-# defines filename extension depending memory manement type.
+# defines filename extension depending memory management type.
ifeq ($(CONFIG_MMU),)
MMUEXT := -nommu
endif
-/* cache.S: cache managment routines
+/* cache.S: cache management routines
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
#include <linux/mm.h>
/*
- * virtually-indexed cache managment (our cache is physically indexed)
+ * virtually-indexed cache management (our cache is physically indexed)
*/
#define flush_cache_all() do {} while (0)
#define flush_cache_mm(mm) do {} while (0)
#define flush_dcache_mmap_unlock(mapping) do {} while (0)
/*
- * physically-indexed cache managment
+ * physically-indexed cache management
*/
#ifndef CONFIG_MN10300_CACHE_DISABLED
&msg, sizeof(msg));
}
-/* new GPIO managment implementation */
+/* new GPIO management implementation */
static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum,
u32 *pGroupNum, u32 *pGroupCfg) {
extern void smscore_putbuffer(struct smscore_device_t *coredev,
struct smscore_buffer_t *cb);
-/* old GPIO managment */
+/* old GPIO management */
int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin,
struct smscore_config_gpio *pinconfig);
int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level);
-/* new GPIO managment */
+/* new GPIO management */
extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum,
struct smscore_gpio_config *pGpioConfig);
extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum,
* Version 0.11: Converted to v4l2_device.
*
* Many things to do:
- * - Correct power managment of device (suspend & resume)
+ * - Correct power management of device (suspend & resume)
* - Add code for scanning and smooth tuning
* - Add code for sensitivity value
* - Correct mistakes
*size = y;
}
/**
- * mpt_set_taskmgmt_in_progress_flag - set flags associated with task managment
+ * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
* @ioc: Pointer to MPT_ADAPTER structure
*
* Returns 0 for SUCCESS or -1 if FAILED.
EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
/**
- * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task managment
+ * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
* @ioc: Pointer to MPT_ADAPTER structure
*
**/
struct eth_platform_data *pdata;
int err = -ENXIO, i;
- /* Enable managment port */
+ /* Enable management port */
macb_writel(bp, NCR, MACB_BIT(MPE));
bp->mii_bus = mdiobus_alloc();
#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */
/*
- * PCI-E Power managment configuration
+ * PCI-E Power management configuration
* and status register [5424+]
*/
#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */
priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID;
}
-/* deals with incoming managment frames. */
+/* deals with incoming management frames. */
static void atmel_management_frame(struct atmel_private *priv,
struct ieee80211_hdr *header,
u16 frame_len, u8 rssi)
void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
-/* xHCI memory managment */
+/* xHCI memory management */
void xhci_mem_cleanup(struct xhci_hcd *xhci);
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
* to an endpoint on a WUSB device that is connected to a
* HWA RC.
*
- * xfer Transfer managment -- this is all the code that gets a
+ * xfer Transfer management -- this is all the code that gets a
* buffer and pushes it to a device (or viceversa). *
*
* Some day a lot of this code will be shared between this driver and
#define DL_UNITDATA_IND 0x3108
#define DL_INFORMATION_IND 0x0008
-/* intern layer 2 managment */
+/* intern layer 2 management */
#define MDL_ASSIGN_REQ 0x1804
#define MDL_ASSIGN_IND 0x1904
#define MDL_REMOVE_REQ 0x1A04
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff