safe/jmp/linux-2.6
2009-12-28 Johannes Bergmac80211: split up and insert custom IEs correctly
2009-12-28 Johannes Bergmac80211: refactor association
2009-12-28 Johannes Bergmac80211: rewrite a few work messages
2009-12-28 Johannes Bergmac80211: generalise work handling
2009-12-28 Johannes Bergmac80211: generalise management work a bit
2009-12-28 Johannes Bergmac80211: let cfg80211 manage auth state
2009-12-28 Johannes Bergmac80211: introduce flush operation
2009-12-28 Johannes Bergmac80211: add ieee80211_sdata_running
2009-12-28 John W. Linvillertl8187: remove priv->mode
2009-12-28 John W. Linvillertl8180: remove priv->mode
2009-12-28 Gertjan van... rt2x00: Cleanup chip handling helper functions.
2009-12-28 Gertjan van... rt2x00: convert RT2800PCI_PCI and RT2800PCI_SOC Kconfig...
2009-12-28 Gertjan van... rt2x00: Let rt2800lib check CONFIG_RT2X00_LIB_USB inste...
2009-12-28 Gertjan van... rt2x00: Fix checks for rt2800 SOC support.
2009-12-28 John W. Linvillewireless: remove CONFIG_WIRELESS_OLD_REGULATORY
2009-12-28 Juuso Oikarinenwl1271: Prevent performing "join" before association
2009-12-28 Juuso Oikarinenwl1271: Check vif for NULL when indicating beacon-loss
2009-12-28 Juuso Oikarinenwl1271: Add support for acx_pm_config
2009-12-28 Juuso Oikarinenwl1271: Change booleans in struct wl1271 into a flags...
2009-12-28 Juuso Oikarinenwl1271: Fix supported rate management
2009-12-28 Juuso Oikarinenwl1271: Change rates configured for templates
2009-12-28 Juuso Oikarinenwl1271: Add rudimentary ad-hoc support
2009-12-28 Juuso Oikarinenwl1271: Remove beacon-loss-ind from PSM entry failure...
2009-12-28 Juuso Oikarinenwl1271: Add pre-power-on sleep
2009-12-28 Juuso Oikarinenwl1271: Implement chipset boot retry
2009-12-28 Juuso Oikarinenwl1271: prevent power save entry while not associated
2009-12-28 Juuso Oikarinenwl1271: Fix event acknowledging functionality
2009-12-28 Juuso Oikarinenwl1271: Use slow rates for association messages
2009-12-28 Juuso Oikarinenwl1271: Remove smart reflex ACX
2009-12-28 Juuso Oikarinenwl1271: Configure smart-reflex paramter values.
2009-12-28 Luciano Coelhowl1271: use channel 1 when configuring the data path
2009-12-28 Luciano Coelhowl1271: some new configuration values according to...
2009-12-28 Luciano Coelhowl1271: upload only the first 468 bytes from the NVS...
2009-12-28 Luciano Coelhowl1271: add gpio_power file in debugfs to power the...
2009-12-28 Luciano Coelhowl1271: fix one typo in the rx_rssi_and_proc_compens...
2009-12-28 Luciano Coelhowl1271: implement dco itrim parameters setting
2009-12-28 Luciano Coelhowl1271: use the correct macro when setting the basic...
2009-12-28 Luciano Coelhowl1271: set null data template when BSSID is known
2009-12-28 Luciano Coelhowl1271: check result code from the join command
2009-12-28 Luciano Coelhowl1271: limit TX power to 25dBm for every channel
2009-12-28 Luciano Coelhowl1271: remove workaround for disconnection
2009-12-28 Luciano Coelhowl1271: use join command with dummy BSSID
2009-12-28 Luciano Coelhowl1271: added radio parameters configuration values...
2009-12-28 Luciano Coelhowl1271: update radio and general parameters values
2009-12-28 Luciano Coelhowl1271: updated general parameters structure for newer...
2009-12-28 Luciano Coelhowl1271: updated radio parameters structure for newer...
2009-12-28 Larry Fingerb43: Allow PIO mode to be selected at module load
2009-12-28 Lennert Buytenhekmwl8k: remove duplicate local per-vif copy of ieee80211...
2009-12-28 Lennert Buytenhekmwl8k: remove unused mwl8k_vif::priv
2009-12-28 Lennert Buytenhekmwl8k: fix up AP vs. STA firmware image receive descrip...
2009-12-28 Lennert Buytenhekmwl8k: do rx/tx ring initialisation after loading firmware
2009-12-28 Lennert Buytenhekmwl8k: get rid of the struct mwl8k_firmware abstraction
2009-12-28 Lennert Buytenhekmwl8k: add 2.4GHz channels 12, 13 and 14
2009-12-28 Lennert Buytenhekmwl8k: initialize the mwl8k_info_tbl table using the...
2009-12-28 Lennert Buytenhekmwl8k: inline qos field manipulation functions
2009-12-28 Lennert Buytenhekmwl8k: get rid of the AMSDU check in the transmit path
2009-12-28 Lennert Buytenhekmwl8k: hw is never NULL in mwl8k_set_radio_preamble()
2009-12-28 Lennert Buytenhekmwl8k: firmware command code cleanup
2009-12-28 John W. LinvilleMerge git://git./linux/kernel/git/linville/wireless-2.6
2009-12-22 Sujithath9k: Fix TX poll routine
2009-12-22 Sujithath9k: Remove ANI lock
2009-12-22 Sujithath9k: Clarify Interrupt mitigation
2009-12-22 Emese Revfyiwlwifi: Constify struct iwl_ops
2009-12-22 Johannes Bergiwlwifi: use new mac80211 SMPS
2009-12-22 Stefan Seyfriedzd1211rw: improve ejecting of fake CDROM
2009-12-22 Stefan Seyfriedar9170usb: add Sphairon Homelink 1202 USB ID
2009-12-22 Luis R. Rodriguezmac80211: only bother printing highest data rate on...
2009-12-22 Luis R. Rodriguezmac80211: parse the HT capabilities info through debugfs
2009-12-22 Luis R. Rodriguezmac80211: make debugfs mcs set entry reflect 16 bits
2009-12-22 Luis R. Rodriguezath9k: add MCS rate index back to debufs rcstat
2009-12-22 Jouni Malinenmac80211_hwsim: Check all local addresses for TX Ack...
2009-12-22 Johannes Bergmac80211: disallow fixing bitrates with hw rate control
2009-12-22 Joe Perchesiwmc3200wifi: Avoid an offset calculation for each...
2009-12-22 Holger Schuriglibertas: remove priv->ratebitmap
2009-12-22 Holger Schuriglibertas: remove priv->capability
2009-12-22 Holger Schuriglibertas: make mesh configurable
2009-12-22 Holger Schuriglibertas: add access functions for mesh open/connect...
2009-12-22 Holger Schuriglibertas: move mesh SSID initialization into mesh.c
2009-12-22 Holger Schuriglibertas: decouple mesh and rtap
2009-12-22 Holger Schuriglibertas: move mesh-related definitions into mesh.h
2009-12-22 Holger Schuriglibertas: remove mesh_autostart_enabled and sync_channel
2009-12-22 Holger Schuriglibertas: use priv->mesh_tlv instead of priv->mesh_fw_ver
2009-12-22 Johannes Bergmac80211: dont try to use existing sta for AP
2009-12-22 Johannes Bergcfg80211: avoid sending spurious deauth to userspace
2009-12-22 Johannes Bergmac80211: allow disabling 40MHz on 2.4GHz
2009-12-22 Johannes Bergmac80211_hwsim: implement ampdu action
2009-12-22 Johannes Bergmac80211: enable spatial multiplexing powersave
2009-12-22 Zhu Yiiwmc3200wifi: rx aggregation support
2009-12-22 Zhu Yiwireless: add ieee80211_amsdu_to_8023s
2009-12-22 gregor kowskimac80211 : fix a race with update_tkip_key
2009-12-21 Gertjan van... rt2x00: Fix trimming of L2 padded frames.
2009-12-21 Benoit Papillaultrt2x00: Fix rt2800usb RX frame format and as such L2PAD
2009-12-21 Benoit PAPILLAULTrt2x00: Disable RX aggregation for rt2800usb
2009-12-21 Gertjan van... rt2x00: Only remove L2 padding in received frames if...
2009-12-21 Gertjan van... rt2x00: Reorganize L2 padding inserting function.
2009-12-21 Gertjan van... rt2x00: Remove SKBDESC_L2_PADDED flag.
2009-12-21 Gertjan van... rt2x00: Further L2 padding fixes.
2009-12-21 Alban Browaeysrt2x00 : trim the skb after having the l2pad removed.
2009-12-21 Alban Browaeysrt2x00 : avoid timestamp for monitor injected frame.
2009-12-21 Alban Browaeysrt2x00 : modify padding location.
next