{
struct mac80211_hwsim_data *data = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
-
- printk(KERN_DEBUG "%s:%s (freq=%d idle=%d ps=%d)\n",
+ static const char *chantypes[4] = {
+ [NL80211_CHAN_NO_HT] = "noht",
+ [NL80211_CHAN_HT20] = "ht20",
+ [NL80211_CHAN_HT40MINUS] = "ht40-",
+ [NL80211_CHAN_HT40PLUS] = "ht40+",
+ };
+ static const char *smps_modes[IEEE80211_SMPS_NUM_MODES] = {
+ [IEEE80211_SMPS_AUTOMATIC] = "auto",
+ [IEEE80211_SMPS_OFF] = "off",
+ [IEEE80211_SMPS_STATIC] = "static",
+ [IEEE80211_SMPS_DYNAMIC] = "dynamic",
+ };
+
+ printk(KERN_DEBUG "%s:%s (freq=%d/%s idle=%d ps=%d smps=%s)\n",
wiphy_name(hw->wiphy), __func__,
conf->channel->center_freq,
+ chantypes[conf->channel_type],
!!(conf->flags & IEEE80211_CONF_IDLE),
- !!(conf->flags & IEEE80211_CONF_PS));
+ !!(conf->flags & IEEE80211_CONF_PS),
+ smps_modes[conf->smps_mode]);
data->idle = !!(conf->flags & IEEE80211_CONF_IDLE);
BIT(NL80211_IFTYPE_MESH_POINT);
hw->flags = IEEE80211_HW_MFP_CAPABLE |
- IEEE80211_HW_SIGNAL_DBM;
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_SUPPORTS_STATIC_SMPS |
+ IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS;
/* ask mac80211 to reserve space for magic */
hw->vif_data_size = sizeof(struct hwsim_vif_priv);
u8 action;
u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
} __attribute__ ((packed)) sa_query;
+ struct {
+ u8 action;
+ u8 smps_control;
+ } __attribute__ ((packed)) ht_smps;
} u;
} __attribute__ ((packed)) action;
} u;
#define IEEE80211_HT_CAP_LDPC_CODING 0x0001
#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002
#define IEEE80211_HT_CAP_SM_PS 0x000C
+#define IEEE80211_HT_CAP_SM_PS_SHIFT 2
#define IEEE80211_HT_CAP_GRN_FLD 0x0010
#define IEEE80211_HT_CAP_SGI_20 0x0020
#define IEEE80211_HT_CAP_SGI_40 0x0040
/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
+#define IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT 2
/*
* Maximum length of AMPDU that the STA can receive.
#define IEEE80211_MAX_AMPDU_BUF 0x40
-/* Spatial Multiplexing Power Save Modes */
+/* Spatial Multiplexing Power Save Modes (for capability) */
#define WLAN_HT_CAP_SM_PS_STATIC 0
#define WLAN_HT_CAP_SM_PS_DYNAMIC 1
#define WLAN_HT_CAP_SM_PS_INVALID 2
#define WLAN_HT_CAP_SM_PS_DISABLED 3
+/* for SM power control field lower two bits */
+#define WLAN_HT_SMPS_CONTROL_DISABLED 0
+#define WLAN_HT_SMPS_CONTROL_STATIC 1
+#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3
+
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
WLAN_ACTION_SPCT_CHL_SWITCH = 4,
};
+/* HT action codes */
+enum ieee80211_ht_actioncode {
+ WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0,
+ WLAN_HT_ACTION_SMPS = 1,
+ WLAN_HT_ACTION_PSMP = 2,
+ WLAN_HT_ACTION_PCO_PHASE = 3,
+ WLAN_HT_ACTION_CSI = 4,
+ WLAN_HT_ACTION_NONCOMPRESSED_BF = 5,
+ WLAN_HT_ACTION_COMPRESSED_BF = 6,
+ WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7,
+};
+
/* Security key length */
enum ieee80211_key_len {
WLAN_KEY_LEN_WEP40 = 5,
* @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
* @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
* @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed
+ * @IEEE80211_CONF_CHANGE_SMPS: Spatial multiplexing powersave mode changed
*/
enum ieee80211_conf_changed {
+ IEEE80211_CONF_CHANGE_SMPS = BIT(1),
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_MONITOR = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
};
/**
+ * enum ieee80211_smps_mode - spatial multiplexing power save mode
+ *
+ * @
+ */
+enum ieee80211_smps_mode {
+ IEEE80211_SMPS_AUTOMATIC,
+ IEEE80211_SMPS_OFF,
+ IEEE80211_SMPS_STATIC,
+ IEEE80211_SMPS_DYNAMIC,
+
+ /* keep last */
+ IEEE80211_SMPS_NUM_MODES,
+};
+
+/**
* struct ieee80211_conf - configuration of the device
*
* This struct indicates how the driver shall configure the hardware.
* @short_frame_max_tx_count: Maximum number of transmissions for a "short"
* frame, called "dot11ShortRetryLimit" in 802.11, but actually means the
* number of transmissions not the number of retries
+ *
+ * @smps_mode: spatial multiplexing powersave mode; note that
+ * %IEEE80211_SMPS_STATIC is used when the device is not
+ * configured for an HT channel
*/
struct ieee80211_conf {
u32 flags;
struct ieee80211_channel *channel;
enum nl80211_channel_type channel_type;
+ enum ieee80211_smps_mode smps_mode;
};
/**
* @IEEE80211_HW_BEACON_FILTER:
* Hardware supports dropping of irrelevant beacon frames to
* avoid waking up cpu.
+ *
+ * @IEEE80211_HW_SUPPORTS_STATIC_SMPS:
+ * Hardware supports static spatial multiplexing powersave,
+ * ie. can turn off all but one chain even on HT connections
+ * that should be using more chains.
+ *
+ * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS:
+ * Hardware supports dynamic spatial multiplexing powersave,
+ * ie. can turn off all but one chain and then wake the rest
+ * up as required after, for example, rts/cts handshake.
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12,
IEEE80211_HW_MFP_CAPABLE = 1<<13,
IEEE80211_HW_BEACON_FILTER = 1<<14,
+ IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15,
+ IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16,
};
/**
*/
/**
+ * DOC: Spatial multiplexing power save
+ *
+ * SMPS (Spatial multiplexing power save) is a mechanism to conserve
+ * power in an 802.11n implementation. For details on the mechanism
+ * and rationale, please refer to 802.11 (as amended by 802.11n-2009)
+ * "11.2.3 SM power save".
+ *
+ * The mac80211 implementation is capable of sending action frames
+ * to update the AP about the station's SMPS mode, and will instruct
+ * the driver to enter the specific mode. It will also announce the
+ * requested SMPS mode during the association handshake. Hardware
+ * support for this feature is required, and can be indicated by
+ * hardware flags.
+ *
+ * The default mode will be "automatic", which nl80211/cfg80211
+ * defines to be dynamic SMPS in (regular) powersave, and SMPS
+ * turned off otherwise.
+ *
+ * To support this feature, the driver must set the appropriate
+ * hardware support flags, and handle the SMPS flag to the config()
+ * operation. It will then with this mechanism be instructed to
+ * enter the requested SMPS mode while associated to an HT AP.
+ */
+
+/**
* DOC: Frame filtering
*
* mac80211 requires to see many management frames for proper
}
#endif
+int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata,
+ enum ieee80211_smps_mode smps_mode)
+{
+ const u8 *ap;
+ enum ieee80211_smps_mode old_req;
+ int err;
+
+ old_req = sdata->u.mgd.req_smps;
+ sdata->u.mgd.req_smps = smps_mode;
+
+ if (old_req == smps_mode &&
+ smps_mode != IEEE80211_SMPS_AUTOMATIC)
+ return 0;
+
+ /*
+ * If not associated, or current association is not an HT
+ * association, there's no need to send an action frame.
+ */
+ if (!sdata->u.mgd.associated ||
+ sdata->local->oper_channel_type == NL80211_CHAN_NO_HT) {
+ mutex_lock(&sdata->local->iflist_mtx);
+ ieee80211_recalc_smps(sdata->local, sdata);
+ mutex_unlock(&sdata->local->iflist_mtx);
+ return 0;
+ }
+
+ ap = sdata->u.mgd.associated->cbss.bssid;
+
+ if (smps_mode == IEEE80211_SMPS_AUTOMATIC) {
+ if (sdata->u.mgd.powersave)
+ smps_mode = IEEE80211_SMPS_DYNAMIC;
+ else
+ smps_mode = IEEE80211_SMPS_OFF;
+ }
+
+ /* send SM PS frame to AP */
+ err = ieee80211_send_smps_action(sdata, smps_mode,
+ ap, ap);
+ if (err)
+ sdata->u.mgd.req_smps = old_req;
+
+ return err;
+}
+
static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
bool enabled, int timeout)
{
sdata->u.mgd.powersave = enabled;
conf->dynamic_ps_timeout = timeout;
+ /* no change, but if automatic follow powersave */
+ mutex_lock(&sdata->u.mgd.mtx);
+ __ieee80211_request_smps(sdata, sdata->u.mgd.req_smps);
+ mutex_unlock(&sdata->u.mgd.mtx);
+
if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
return ret;
}
+static ssize_t ieee80211_if_write(
+ struct ieee80211_sub_if_data *sdata,
+ const char __user *userbuf,
+ size_t count, loff_t *ppos,
+ ssize_t (*write)(struct ieee80211_sub_if_data *, const char *, int))
+{
+ u8 *buf;
+ ssize_t ret = -ENODEV;
+
+ buf = kzalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ if (copy_from_user(buf, userbuf, count))
+ return -EFAULT;
+
+ rtnl_lock();
+ if (sdata->dev->reg_state == NETREG_REGISTERED)
+ ret = (*write)(sdata, buf, count);
+ rtnl_unlock();
+
+ return ret;
+}
+
#define IEEE80211_IF_FMT(name, field, format_string) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, char *buf, \
return scnprintf(buf, buflen, "%pM\n", sdata->field); \
}
-#define __IEEE80211_IF_FILE(name) \
+#define __IEEE80211_IF_FILE(name, _write) \
static ssize_t ieee80211_if_read_##name(struct file *file, \
char __user *userbuf, \
size_t count, loff_t *ppos) \
} \
static const struct file_operations name##_ops = { \
.read = ieee80211_if_read_##name, \
+ .write = (_write), \
.open = mac80211_open_file_generic, \
}
+#define __IEEE80211_IF_FILE_W(name) \
+static ssize_t ieee80211_if_write_##name(struct file *file, \
+ const char __user *userbuf, \
+ size_t count, loff_t *ppos) \
+{ \
+ return ieee80211_if_write(file->private_data, userbuf, count, \
+ ppos, ieee80211_if_parse_##name); \
+} \
+__IEEE80211_IF_FILE(name, ieee80211_if_write_##name)
+
+
#define IEEE80211_IF_FILE(name, field, format) \
IEEE80211_IF_FMT_##format(name, field) \
- __IEEE80211_IF_FILE(name)
+ __IEEE80211_IF_FILE(name, NULL)
/* common attributes */
IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
IEEE80211_IF_FILE(aid, u.mgd.aid, DEC);
IEEE80211_IF_FILE(capab, u.mgd.capab, HEX);
+static int ieee80211_set_smps(struct ieee80211_sub_if_data *sdata,
+ enum ieee80211_smps_mode smps_mode)
+{
+ struct ieee80211_local *local = sdata->local;
+ int err;
+
+ if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS) &&
+ smps_mode == IEEE80211_SMPS_STATIC)
+ return -EINVAL;
+
+ /* auto should be dynamic if in PS mode */
+ if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS) &&
+ (smps_mode == IEEE80211_SMPS_DYNAMIC ||
+ smps_mode == IEEE80211_SMPS_AUTOMATIC))
+ return -EINVAL;
+
+ /* supported only on managed interfaces for now */
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ return -EOPNOTSUPP;
+
+ mutex_lock(&local->iflist_mtx);
+ err = __ieee80211_request_smps(sdata, smps_mode);
+ mutex_unlock(&local->iflist_mtx);
+
+ return err;
+}
+
+static const char *smps_modes[IEEE80211_SMPS_NUM_MODES] = {
+ [IEEE80211_SMPS_AUTOMATIC] = "auto",
+ [IEEE80211_SMPS_OFF] = "off",
+ [IEEE80211_SMPS_STATIC] = "static",
+ [IEEE80211_SMPS_DYNAMIC] = "dynamic",
+};
+
+static ssize_t ieee80211_if_fmt_smps(const struct ieee80211_sub_if_data *sdata,
+ char *buf, int buflen)
+{
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ return -EOPNOTSUPP;
+
+ return snprintf(buf, buflen, "request: %s\nused: %s\n",
+ smps_modes[sdata->u.mgd.req_smps],
+ smps_modes[sdata->u.mgd.ap_smps]);
+}
+
+static ssize_t ieee80211_if_parse_smps(struct ieee80211_sub_if_data *sdata,
+ const char *buf, int buflen)
+{
+ enum ieee80211_smps_mode mode;
+
+ for (mode = 0; mode < IEEE80211_SMPS_NUM_MODES; mode++) {
+ if (strncmp(buf, smps_modes[mode], buflen) == 0) {
+ int err = ieee80211_set_smps(sdata, mode);
+ if (!err)
+ return buflen;
+ return err;
+ }
+ }
+
+ return -EINVAL;
+}
+
+__IEEE80211_IF_FILE_W(smps);
+
/* AP attributes */
IEEE80211_IF_FILE(num_sta_ps, u.ap.num_sta_ps, ATOMIC);
IEEE80211_IF_FILE(dtim_count, u.ap.dtim_count, DEC);
return scnprintf(buf, buflen, "%u\n",
skb_queue_len(&sdata->u.ap.ps_bc_buf));
}
-__IEEE80211_IF_FILE(num_buffered_multicast);
+__IEEE80211_IF_FILE(num_buffered_multicast, NULL);
/* WDS attributes */
IEEE80211_IF_FILE(peer, u.wds.remote_addr, MAC);
debugfs_create_file(#name, 0400, sdata->debugfs.dir, \
sdata, &name##_ops);
+#define DEBUGFS_ADD_MODE(name, mode) \
+ debugfs_create_file(#name, mode, sdata->debugfs.dir, \
+ sdata, &name##_ops);
+
static void add_sta_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted, sta);
DEBUGFS_ADD(bssid, sta);
DEBUGFS_ADD(aid, sta);
DEBUGFS_ADD(capab, sta);
+ DEBUGFS_ADD_MODE(smps, 0600);
}
static void add_ap_files(struct ieee80211_sub_if_data *sdata)
__field(u8, short_frame_max_tx_count)
__field(int, center_freq)
__field(int, channel_type)
+ __field(int, smps)
),
TP_fast_assign(
__entry->short_frame_max_tx_count = local->hw.conf.short_frame_max_tx_count;
__entry->center_freq = local->hw.conf.channel->center_freq;
__entry->channel_type = local->hw.conf.channel_type;
+ __entry->smps = local->hw.conf.smps_mode;
),
TP_printk(
spin_unlock_bh(&sta->lock);
}
}
+
+int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
+ enum ieee80211_smps_mode smps, const u8 *da,
+ const u8 *bssid)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct sk_buff *skb;
+ struct ieee80211_mgmt *action_frame;
+
+ /* 27 = header + category + action + smps mode */
+ skb = dev_alloc_skb(27 + local->hw.extra_tx_headroom);
+ if (!skb)
+ return -ENOMEM;
+
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+ action_frame = (void *)skb_put(skb, 27);
+ memcpy(action_frame->da, da, ETH_ALEN);
+ memcpy(action_frame->sa, sdata->dev->dev_addr, ETH_ALEN);
+ memcpy(action_frame->bssid, bssid, ETH_ALEN);
+ action_frame->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_ACTION);
+ action_frame->u.action.category = WLAN_CATEGORY_HT;
+ action_frame->u.action.u.ht_smps.action = WLAN_HT_ACTION_SMPS;
+ switch (smps) {
+ case IEEE80211_SMPS_AUTOMATIC:
+ case IEEE80211_SMPS_NUM_MODES:
+ WARN_ON(1);
+ case IEEE80211_SMPS_OFF:
+ action_frame->u.action.u.ht_smps.smps_control =
+ WLAN_HT_SMPS_CONTROL_DISABLED;
+ break;
+ case IEEE80211_SMPS_STATIC:
+ action_frame->u.action.u.ht_smps.smps_control =
+ WLAN_HT_SMPS_CONTROL_STATIC;
+ break;
+ case IEEE80211_SMPS_DYNAMIC:
+ action_frame->u.action.u.ht_smps.smps_control =
+ WLAN_HT_SMPS_CONTROL_DYNAMIC;
+ break;
+ }
+
+ /* we'll do more on status of this frame */
+ IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+ ieee80211_tx_skb(sdata, skb);
+
+ return 0;
+}
unsigned long timers_running; /* used for quiesce/restart */
bool powersave; /* powersave requested for this iface */
+ enum ieee80211_smps_mode req_smps, /* requested smps mode */
+ ap_smps; /* smps mode AP thinks we're in */
unsigned long request;
/* used for uploading changed mc list */
struct work_struct reconfig_filter;
+ /* used to reconfigure hardware SM PS */
+ struct work_struct recalc_smps;
+
/* aggregated multicast list */
struct dev_addr_list *mc_list;
int mc_count;
int user_power_level; /* in dBm */
int power_constr_level; /* in dBm */
+ enum ieee80211_smps_mode smps_mode;
+
struct work_struct restart_work;
#ifdef CONFIG_MAC80211_DEBUGFS
void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
const u8 *da, u16 tid,
u16 initiator, u16 reason_code);
+int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata,
+ enum ieee80211_smps_mode smps, const u8 *da,
+ const u8 *bssid);
void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *da,
u16 tid, u16 initiator, u16 reason);
u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
struct ieee802_11_elems *elems,
enum ieee80211_band band);
+int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata,
+ enum ieee80211_smps_mode smps_mode);
+void ieee80211_recalc_smps(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *forsdata);
#ifdef CONFIG_MAC80211_NOINLINE
#define debug_noinline noinline
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
+ if (!conf_is_ht(&local->hw.conf)) {
+ /*
+ * mac80211.h documents that this is only valid
+ * when the channel is set to an HT type, and
+ * that otherwise STATIC is used.
+ */
+ local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
+ } else if (local->hw.conf.smps_mode != local->smps_mode) {
+ local->hw.conf.smps_mode = local->smps_mode;
+ changed |= IEEE80211_CONF_CHANGE_SMPS;
+ }
+
if (scan_chan)
power = chan->max_power;
else
}
EXPORT_SYMBOL(ieee80211_restart_hw);
+static void ieee80211_recalc_smps_work(struct work_struct *work)
+{
+ struct ieee80211_local *local =
+ container_of(work, struct ieee80211_local, recalc_smps);
+
+ mutex_lock(&local->iflist_mtx);
+ ieee80211_recalc_smps(local, NULL);
+ mutex_unlock(&local->iflist_mtx);
+}
+
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
INIT_WORK(&local->restart_work, ieee80211_restart_work);
INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
+ INIT_WORK(&local->recalc_smps, ieee80211_recalc_smps_work);
+ local->smps_mode = IEEE80211_SMPS_OFF;
INIT_WORK(&local->dynamic_ps_enable_work,
ieee80211_dynamic_ps_enable_work);
__le16 tmp;
u32 flags = local->hw.conf.channel->flags;
+ /* determine capability flags */
+
switch (ht_info->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
break;
}
- tmp = cpu_to_le16(cap);
- pos = skb_put(skb, sizeof(struct ieee80211_ht_cap)+2);
+ /* set SM PS mode properly */
+ cap &= ~IEEE80211_HT_CAP_SM_PS;
+ /* new association always uses requested smps mode */
+ if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
+ if (ifmgd->powersave)
+ ifmgd->ap_smps = IEEE80211_SMPS_DYNAMIC;
+ else
+ ifmgd->ap_smps = IEEE80211_SMPS_OFF;
+ } else
+ ifmgd->ap_smps = ifmgd->req_smps;
+
+ switch (ifmgd->ap_smps) {
+ case IEEE80211_SMPS_AUTOMATIC:
+ case IEEE80211_SMPS_NUM_MODES:
+ WARN_ON(1);
+ case IEEE80211_SMPS_OFF:
+ cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ case IEEE80211_SMPS_STATIC:
+ cap |= WLAN_HT_CAP_SM_PS_STATIC <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ case IEEE80211_SMPS_DYNAMIC:
+ cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ }
+
+ /* reserve and fill IE */
+
+ pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
*pos++ = WLAN_EID_HT_CAPABILITY;
*pos++ = sizeof(struct ieee80211_ht_cap);
memset(pos, 0, sizeof(struct ieee80211_ht_cap));
+
+ /* capability flags */
+ tmp = cpu_to_le16(cap);
memcpy(pos, &tmp, sizeof(u16));
pos += sizeof(u16);
- /* TODO: needs a define here for << 2 */
+
+ /* AMPDU parameters */
*pos++ = sband->ht_cap.ampdu_factor |
- (sband->ht_cap.ampdu_density << 2);
+ (sband->ht_cap.ampdu_density <<
+ IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT);
+
+ /* MCS set */
memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
+ pos += sizeof(sband->ht_cap.mcs);
+
+ /* extended capabilities */
+ pos += sizeof(__le16);
+
+ /* BF capabilities */
+ pos += sizeof(__le32);
+
+ /* antenna selection */
+ pos += sizeof(u8);
}
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
mutex_lock(&local->iflist_mtx);
ieee80211_recalc_ps(local, -1);
+ ieee80211_recalc_smps(local, sdata);
mutex_unlock(&local->iflist_mtx);
netif_start_queue(sdata->dev);
ifmgd->flags |= IEEE80211_STA_WMM_ENABLED;
mutex_init(&ifmgd->mtx);
+
+ if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
+ ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
+ else
+ ifmgd->req_smps = IEEE80211_SMPS_OFF;
}
/* scan finished notification */
dev_kfree_skb(skb);
}
+static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb)
+{
+ struct ieee80211_mgmt *mgmt = (void *) skb->data;
+ struct ieee80211_local *local = sta->local;
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+
+ if (ieee80211_is_action(mgmt->frame_control) &&
+ sdata->vif.type == NL80211_IFTYPE_STATION &&
+ mgmt->u.action.category == WLAN_CATEGORY_HT &&
+ mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS) {
+ /*
+ * This update looks racy, but isn't -- if we come
+ * here we've definitely got a station that we're
+ * talking to, and on a managed interface that can
+ * only be the AP. And the only other place updating
+ * this variable is before we're associated.
+ */
+ switch (mgmt->u.action.u.ht_smps.smps_control) {
+ case WLAN_HT_SMPS_CONTROL_DYNAMIC:
+ sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_DYNAMIC;
+ break;
+ case WLAN_HT_SMPS_CONTROL_STATIC:
+ sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_STATIC;
+ break;
+ case WLAN_HT_SMPS_CONTROL_DISABLED:
+ default: /* shouldn't happen since we don't send that */
+ sta->sdata->u.mgd.ap_smps = IEEE80211_SMPS_OFF;
+ break;
+ }
+
+ ieee80211_queue_work(&local->hw, &local->recalc_smps);
+ }
+}
+
void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct sk_buff *skb2;
rate_control_tx_status(local, sband, sta, skb);
if (ieee80211_vif_is_mesh(&sta->sdata->vif))
ieee80211s_update_metric(local, sta, skb);
+
+ if (!(info->flags & IEEE80211_TX_CTL_INJECTED) &&
+ (info->flags & IEEE80211_TX_STAT_ACK))
+ ieee80211_frame_acked(sta, skb);
}
rcu_read_unlock();
return 0;
}
+static int check_mgd_smps(struct ieee80211_if_managed *ifmgd,
+ enum ieee80211_smps_mode *smps_mode)
+{
+ if (ifmgd->associated) {
+ *smps_mode = ifmgd->ap_smps;
+
+ if (*smps_mode == IEEE80211_SMPS_AUTOMATIC) {
+ if (ifmgd->powersave)
+ *smps_mode = IEEE80211_SMPS_DYNAMIC;
+ else
+ *smps_mode = IEEE80211_SMPS_OFF;
+ }
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/* must hold iflist_mtx */
+void ieee80211_recalc_smps(struct ieee80211_local *local,
+ struct ieee80211_sub_if_data *forsdata)
+{
+ struct ieee80211_sub_if_data *sdata;
+ enum ieee80211_smps_mode smps_mode = IEEE80211_SMPS_OFF;
+ int count = 0;
+
+ if (forsdata)
+ WARN_ON(!mutex_is_locked(&forsdata->u.mgd.mtx));
+
+ WARN_ON(!mutex_is_locked(&local->iflist_mtx));
+
+ /*
+ * This function could be improved to handle multiple
+ * interfaces better, but right now it makes any
+ * non-station interfaces force SM PS to be turned
+ * off. If there are multiple station interfaces it
+ * could also use the best possible mode, e.g. if
+ * one is in static and the other in dynamic then
+ * dynamic is ok.
+ */
+
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ if (!netif_running(sdata->dev))
+ continue;
+ if (sdata->vif.type != NL80211_IFTYPE_STATION)
+ goto set;
+ if (sdata != forsdata) {
+ /*
+ * This nested is ok -- we are holding the iflist_mtx
+ * so can't get here twice or so. But it's required
+ * since normally we acquire it first and then the
+ * iflist_mtx.
+ */
+ mutex_lock_nested(&sdata->u.mgd.mtx, SINGLE_DEPTH_NESTING);
+ count += check_mgd_smps(&sdata->u.mgd, &smps_mode);
+ mutex_unlock(&sdata->u.mgd.mtx);
+ } else
+ count += check_mgd_smps(&sdata->u.mgd, &smps_mode);
+
+ if (count > 1) {
+ smps_mode = IEEE80211_SMPS_OFF;
+ break;
+ }
+ }
+
+ if (smps_mode == local->smps_mode)
+ return;
+
+ set:
+ local->smps_mode = smps_mode;
+ /* changed flag is auto-detected for this */
+ ieee80211_hw_config(local, 0);
+}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff