#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/backlight.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER);
}
-/*
- * We write our info in page, we begin at offset off and cannot write more
- * than count bytes. We set eof to 1 if we handle those 2 values. We return the
- * number of bytes written in page
- */
-static int
-proc_read_info(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int asus_info_proc_show(struct seq_file *m, void *v)
{
- int len = 0;
int temp;
- char buf[16]; /* enough for all info */
- /*
- * We use the easy way, we don't care of off and count,
- * so we don't set eof to 1
- */
- len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n");
- len += sprintf(page + len, "Model reference : %s\n",
- hotk->methods->name);
+ seq_printf(m, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n");
+ seq_printf(m, "Model reference : %s\n", hotk->methods->name);
/*
* The SFUN method probably allows the original driver to get the list
* of features supported by a given model. For now, 0x0100 or 0x0800
* The significance of others is yet to be found.
*/
if (read_acpi_int(hotk->handle, "SFUN", &temp))
- len +=
- sprintf(page + len, "SFUN value : 0x%04x\n", temp);
+ seq_printf(m, "SFUN value : 0x%04x\n", temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
* battery low and 0x04 for battery critical, its readings tend to be
* silently ignored.
*/
if (read_acpi_int(hotk->handle, "ASYM", &temp))
- len +=
- sprintf(page + len, "ASYM value : 0x%04x\n", temp);
+ seq_printf(m, "ASYM value : 0x%04x\n", temp);
if (asus_info) {
- snprintf(buf, 16, "%d", asus_info->length);
- len += sprintf(page + len, "DSDT length : %s\n", buf);
- snprintf(buf, 16, "%d", asus_info->checksum);
- len += sprintf(page + len, "DSDT checksum : %s\n", buf);
- snprintf(buf, 16, "%d", asus_info->revision);
- len += sprintf(page + len, "DSDT revision : %s\n", buf);
- snprintf(buf, 7, "%s", asus_info->oem_id);
- len += sprintf(page + len, "OEM id : %s\n", buf);
- snprintf(buf, 9, "%s", asus_info->oem_table_id);
- len += sprintf(page + len, "OEM table id : %s\n", buf);
- snprintf(buf, 16, "%x", asus_info->oem_revision);
- len += sprintf(page + len, "OEM revision : 0x%s\n", buf);
- snprintf(buf, 5, "%s", asus_info->asl_compiler_id);
- len += sprintf(page + len, "ASL comp vendor id : %s\n", buf);
- snprintf(buf, 16, "%x", asus_info->asl_compiler_revision);
- len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf);
+ seq_printf(m, "DSDT length : %d\n", asus_info->length);
+ seq_printf(m, "DSDT checksum : %d\n", asus_info->checksum);
+ seq_printf(m, "DSDT revision : %d\n", asus_info->revision);
+ seq_printf(m, "OEM id : %.*s\n", ACPI_OEM_ID_SIZE, asus_info->oem_id);
+ seq_printf(m, "OEM table id : %.*s\n", ACPI_OEM_TABLE_ID_SIZE, asus_info->oem_table_id);
+ seq_printf(m, "OEM revision : 0x%x\n", asus_info->oem_revision);
+ seq_printf(m, "ASL comp vendor id : %.*s\n", ACPI_NAME_SIZE, asus_info->asl_compiler_id);
+ seq_printf(m, "ASL comp revision : 0x%x\n", asus_info->asl_compiler_revision);
}
- return len;
+ return 0;
+}
+
+static int asus_info_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, asus_info_proc_show, NULL);
}
+static const struct file_operations asus_info_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = asus_info_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* /proc handlers
* We write our info in page, we begin at offset off and cannot write more
/*
* Proc handlers for MLED
*/
-static int
-proc_read_mled(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int mled_proc_show(struct seq_file *m, void *v)
{
- return sprintf(page, "%d\n",
- read_led(hotk->methods->mled_status, MLED_ON));
+ seq_printf(m, "%d\n", read_led(hotk->methods->mled_status, MLED_ON));
+ return 0;
}
-static int
-proc_write_mled(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int mled_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mled_proc_show, NULL);
+}
+
+static ssize_t mled_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *pos)
{
return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1);
}
+static const struct file_operations mled_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mled_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = mled_proc_write,
+};
+
/*
* Proc handlers for LED display
*/
-static int
-proc_read_ledd(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int ledd_proc_show(struct seq_file *m, void *v)
{
- return sprintf(page, "0x%08x\n", hotk->ledd_status);
+ seq_printf(m, "0x%08x\n", hotk->ledd_status);
+ return 0;
}
-static int
-proc_write_ledd(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int ledd_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ledd_proc_show, NULL);
+}
+
+static ssize_t ledd_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *pos)
{
int rv, value;
return rv;
}
+static const struct file_operations ledd_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = ledd_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = ledd_proc_write,
+};
+
/*
* Proc handlers for WLED
*/
-static int
-proc_read_wled(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int wled_proc_show(struct seq_file *m, void *v)
{
- return sprintf(page, "%d\n",
- read_led(hotk->methods->wled_status, WLED_ON));
+ seq_printf(m, "%d\n", read_led(hotk->methods->wled_status, WLED_ON));
+ return 0;
}
-static int
-proc_write_wled(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int wled_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wled_proc_show, NULL);
+}
+
+static ssize_t wled_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *pos)
{
return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0);
}
+static const struct file_operations wled_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = wled_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = wled_proc_write,
+};
+
/*
* Proc handlers for Bluetooth
*/
-static int
-proc_read_bluetooth(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int bluetooth_proc_show(struct seq_file *m, void *v)
{
- return sprintf(page, "%d\n", read_led(hotk->methods->bt_status, BT_ON));
+ seq_printf(m, "%d\n", read_led(hotk->methods->bt_status, BT_ON));
+ return 0;
}
-static int
-proc_write_bluetooth(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int bluetooth_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, bluetooth_proc_show, NULL);
+}
+
+static ssize_t bluetooth_proc_write(struct file *file,
+ const char __user *buffer, size_t count, loff_t *pos)
{
/* Note: mt_bt_switch controls both internal Bluetooth adapter's
presence and its LED */
return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0);
}
+static const struct file_operations bluetooth_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = bluetooth_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = bluetooth_proc_write,
+};
+
/*
* Proc handlers for TLED
*/
-static int
-proc_read_tled(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int tled_proc_show(struct seq_file *m, void *v)
{
- return sprintf(page, "%d\n",
- read_led(hotk->methods->tled_status, TLED_ON));
+ seq_printf(m, "%d\n", read_led(hotk->methods->tled_status, TLED_ON));
+ return 0;
}
-static int
-proc_write_tled(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int tled_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, tled_proc_show, NULL);
+}
+
+static ssize_t tled_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *pos)
{
return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0);
}
+static const struct file_operations tled_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = tled_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = tled_proc_write,
+};
+
static int get_lcd_state(void)
{
int lcd = 0;
}
-static int
-proc_read_lcd(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int lcd_proc_show(struct seq_file *m, void *v)
{
- return sprintf(page, "%d\n", get_lcd_state());
+ seq_printf(m, "%d\n", get_lcd_state());
+ return 0;
}
-static int
-proc_write_lcd(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int lcd_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, lcd_proc_show, NULL);
+}
+
+static ssize_t lcd_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *pos)
{
int rv, value;
return rv;
}
+static const struct file_operations lcd_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = lcd_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = lcd_proc_write,
+};
+
static int read_brightness(struct backlight_device *bd)
{
int value;
return set_brightness(bd->props.brightness);
}
-static int
-proc_read_brn(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int brn_proc_show(struct seq_file *m, void *v)
{
- return sprintf(page, "%d\n", read_brightness(NULL));
+ seq_printf(m, "%d\n", read_brightness(NULL));
+ return 0;
}
-static int
-proc_write_brn(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int brn_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, brn_proc_show, NULL);
+}
+
+static ssize_t brn_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *pos)
{
int rv, value;
return rv;
}
+static const struct file_operations brn_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = brn_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = brn_proc_write,
+};
+
static void set_display(int value)
{
/* no sanity check needed for now */
* Now, *this* one could be more user-friendly, but so far, no-one has
* complained. The significance of bits is the same as in proc_write_disp()
*/
-static int
-proc_read_disp(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int disp_proc_show(struct seq_file *m, void *v)
{
int value = 0;
printk(KERN_WARNING
"Asus ACPI: Error reading display status\n");
value &= 0x07; /* needed for some models, shouldn't hurt others */
- return sprintf(page, "%d\n", value);
+ seq_printf(m, "%d\n", value);
+ return 0;
+}
+
+static int disp_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, disp_proc_show, NULL);
}
/*
* (bitwise) of these will suffice. I never actually tested 3 displays hooked
* up simultaneously, so be warned. See the acpi4asus README for more info.
*/
-static int
-proc_write_disp(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static ssize_t disp_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *pos)
{
int rv, value;
return rv;
}
-typedef int (proc_readfunc) (char *page, char **start, off_t off, int count,
- int *eof, void *data);
-typedef int (proc_writefunc) (struct file *file, const char __user *buffer,
- unsigned long count, void *data);
+static const struct file_operations disp_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = disp_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = disp_proc_write,
+};
static int
-asus_proc_add(char *name, proc_writefunc *writefunc,
- proc_readfunc *readfunc, mode_t mode,
+asus_proc_add(char *name, const struct file_operations *proc_fops, mode_t mode,
struct acpi_device *device)
{
- struct proc_dir_entry *proc =
- create_proc_entry(name, mode, acpi_device_dir(device));
+ struct proc_dir_entry *proc;
+
+ proc = proc_create_data(name, mode, acpi_device_dir(device),
+ proc_fops, acpi_driver_data(device));
if (!proc) {
printk(KERN_WARNING " Unable to create %s fs entry\n", name);
return -1;
}
- proc->write_proc = writefunc;
- proc->read_proc = readfunc;
- proc->data = acpi_driver_data(device);
proc->uid = asus_uid;
proc->gid = asus_gid;
return 0;
if (!acpi_device_dir(device))
return -ENODEV;
- proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device));
+ proc = proc_create(PROC_INFO, mode, acpi_device_dir(device),
+ &asus_info_proc_fops);
if (proc) {
- proc->read_proc = proc_read_info;
- proc->data = acpi_driver_data(device);
proc->uid = asus_uid;
proc->gid = asus_gid;
} else {
}
if (hotk->methods->mt_wled) {
- asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled,
- mode, device);
+ asus_proc_add(PROC_WLED, &wled_proc_fops, mode, device);
}
if (hotk->methods->mt_ledd) {
- asus_proc_add(PROC_LEDD, &proc_write_ledd, &proc_read_ledd,
- mode, device);
+ asus_proc_add(PROC_LEDD, &ledd_proc_fops, mode, device);
}
if (hotk->methods->mt_mled) {
- asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled,
- mode, device);
+ asus_proc_add(PROC_MLED, &mled_proc_fops, mode, device);
}
if (hotk->methods->mt_tled) {
- asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled,
- mode, device);
+ asus_proc_add(PROC_TLED, &tled_proc_fops, mode, device);
}
if (hotk->methods->mt_bt_switch) {
- asus_proc_add(PROC_BT, &proc_write_bluetooth,
- &proc_read_bluetooth, mode, device);
+ asus_proc_add(PROC_BT, &bluetooth_proc_fops, mode, device);
}
/*
* accessible from the keyboard
*/
if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) {
- asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode,
- device);
+ asus_proc_add(PROC_LCD, &lcd_proc_fops, mode, device);
}
if ((hotk->methods->brightness_up && hotk->methods->brightness_down) ||
(hotk->methods->brightness_get && hotk->methods->brightness_set)) {
- asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode,
- device);
+ asus_proc_add(PROC_BRN, &brn_proc_fops, mode, device);
}
if (hotk->methods->display_set) {
- asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp,
- mode, device);
+ asus_proc_add(PROC_DISP, &disp_proc_fops, mode, device);
}
return 0;
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff