}
-static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta)
+/*
+ * Called after adding a new station to initialize rate scaling
+ */
+void iwl3945_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
{
- struct iwl3945_rs_sta *rs_sta = priv_sta;
- struct iwl_priv *priv = (struct iwl_priv *)priv_r;
+ struct ieee80211_hw *hw = priv->hw;
+ struct ieee80211_conf *conf = &priv->hw->conf;
+ struct iwl3945_sta_priv *psta;
+ struct iwl3945_rs_sta *rs_sta;
+ struct ieee80211_supported_band *sband;
int i;
- IWL_DEBUG_RATE(priv, "enter\n");
+ IWL_DEBUG_INFO(priv, "enter \n");
+ if (sta_id == priv->hw_params.bcast_sta_id)
+ goto out;
- spin_lock_init(&rs_sta->lock);
+ psta = (struct iwl3945_sta_priv *) sta->drv_priv;
+ rs_sta = &psta->rs_sta;
+ sband = hw->wiphy->bands[conf->channel->band];
rs_sta->priv = priv;
rs_sta->last_flush = jiffies;
rs_sta->flush_time = IWL_RATE_FLUSH;
rs_sta->last_tx_packets = 0;
- rs_sta->ibss_sta_added = 0;
- init_timer(&rs_sta->rate_scale_flush);
rs_sta->rate_scale_flush.data = (unsigned long)rs_sta;
rs_sta->rate_scale_flush.function = iwl3945_bg_rate_scale_flush;
IWL_FIRST_OFDM_RATE;
}
+out:
+ priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
- IWL_DEBUG_RATE(priv, "leave\n");
+ IWL_DEBUG_INFO(priv, "leave\n");
}
static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
rs_sta = &psta->rs_sta;
+ spin_lock_init(&rs_sta->lock);
+ init_timer(&rs_sta->rate_scale_flush);
+
IWL_DEBUG_RATE(priv, "leave\n");
return rs_sta;
static void rs_free_sta(void *iwl_priv, struct ieee80211_sta *sta,
void *priv_sta)
{
- struct iwl3945_sta_priv *psta = (void *) sta->drv_priv;
- struct iwl3945_rs_sta *rs_sta = &psta->rs_sta;
- struct iwl_priv *priv __maybe_unused = rs_sta->priv;
+ struct iwl3945_rs_sta *rs_sta = priv_sta;
- IWL_DEBUG_RATE(priv, "enter\n");
+ /*
+ * Be careful not to use any members of iwl3945_rs_sta (like trying
+ * to use iwl_priv to print out debugging) since it may not be fully
+ * initialized at this point.
+ */
del_timer_sync(&rs_sta->rate_scale_flush);
- IWL_DEBUG_RATE(priv, "leave\n");
}
return;
}
+ /* Treat uninitialized rate scaling data same as non-existing. */
+ if (!rs_sta->priv) {
+ IWL_DEBUG_RATE(priv, "leave: STA priv data uninitialized!\n");
+ return;
+ }
+
+
rs_sta->tx_packets++;
scale_rate_index = first_index;
u32 fail_count;
s8 scale_action = 0;
unsigned long flags;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
u16 rate_mask = sta ? sta->supp_rates[sband->band] : 0;
s8 max_rate_idx = -1;
struct iwl_priv *priv = (struct iwl_priv *)priv_r;
IWL_DEBUG_RATE(priv, "enter\n");
+ /* Treat uninitialized rate scaling data same as non-existing. */
+ if (rs_sta && !rs_sta->priv) {
+ IWL_DEBUG_RATE(priv, "Rate scaling information not initialized yet.\n");
+ priv_sta = NULL;
+ }
+
if (rate_control_send_low(sta, priv_sta, txrc))
return;
if (sband->band == IEEE80211_BAND_5GHZ)
rate_mask = rate_mask << IWL_FIRST_OFDM_RATE;
- if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
- !rs_sta->ibss_sta_added) {
- u8 sta_id = iwl_find_station(priv, hdr->addr1);
-
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
- hdr->addr1);
- sta_id = iwl_add_station(priv, hdr->addr1, false,
- CMD_ASYNC, NULL);
- }
- if (sta_id != IWL_INVALID_STATION)
- rs_sta->ibss_sta_added = 1;
- }
-
spin_lock_irqsave(&rs_sta->lock, flags);
/* for recent assoc, choose best rate regarding
}
#endif
+/*
+ * Initialization of rate scaling information is done by driver after
+ * the station is added. Since mac80211 calls this function before a
+ * station is added we ignore it.
+ */
+static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta, void *priv_sta)
+{
+}
+
static struct rate_control_ops rs_ops = {
.module = NULL,
.name = RS_NAME,
.tx_status = rs_tx_status,
.get_rate = rs_get_rate,
- .rate_init = rs_rate_init,
+ .rate_init = rs_rate_init_stub,
.alloc = rs_alloc,
.free = rs_free,
.alloc_sta = rs_alloc_sta,
#endif
};
-
void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id)
{
struct iwl_priv *priv = hw->priv;
sta = ieee80211_find_sta(priv->vif,
priv->stations[sta_id].sta.sta.addr);
if (!sta) {
+ IWL_DEBUG_RATE(priv, "Unable to find station to initialize rate scaling.\n");
rcu_read_unlock();
return;
}
IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
+ /* Treat uninitialized rate scaling data same as non-existing. */
+ if (!lq_sta) {
+ IWL_DEBUG_RATE(priv, "Station rate scaling not created yet.\n");
+ return;
+ } else if (!lq_sta->drv) {
+ IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
+ return;
+ }
+
if (!ieee80211_is_data(hdr->frame_control) ||
info->flags & IEEE80211_TX_CTL_NO_ACK)
return;
!(info->flags & IEEE80211_TX_STAT_AMPDU))
return;
- if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
- !lq_sta->ibss_sta_added)
- return;
-
/*
* Ignore this Tx frame response if its initial rate doesn't match
* that of latest Link Quality command. There may be stragglers
lq_sta->missed_rate_counter++;
if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
lq_sta->missed_rate_counter = 0;
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC, false);
}
/* Regardless, ignore this status info for outdated rate */
return;
/* Update uCode's rate table. */
rate = rate_n_flags_from_tbl(priv, tbl, index, is_green);
rs_fill_link_cmd(priv, lq_sta, rate);
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC, false);
return rate;
}
IWL_DEBUG_RATE(priv, "Switch current mcs: %X index: %d\n",
tbl->current_rate, index);
rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC, false);
} else
done_search = 1;
}
return;
}
-
+/**
+ * rs_initialize_lq - Initialize a station's hardware rate table
+ *
+ * The uCode's station table contains a table of fallback rates
+ * for automatic fallback during transmission.
+ *
+ * NOTE: This sets up a default set of values. These will be replaced later
+ * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
+ * rc80211_simple.
+ *
+ * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
+ * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
+ * which requires station table entry to exist).
+ */
static void rs_initialize_lq(struct iwl_priv *priv,
struct ieee80211_conf *conf,
struct ieee80211_sta *sta,
tbl->current_rate = rate;
rs_set_expected_tpt_table(lq_sta, tbl);
rs_fill_link_cmd(NULL, lq_sta, rate);
- iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
+ priv->stations[lq_sta->lq.sta_id].lq = &lq_sta->lq;
+ iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_SYNC, true);
out:
return;
}
struct sk_buff *skb = txrc->skb;
struct ieee80211_supported_band *sband = txrc->sband;
struct iwl_priv *priv = (struct iwl_priv *)priv_r;
- struct ieee80211_conf *conf = &priv->hw->conf;
- struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct iwl_lq_sta *lq_sta = priv_sta;
int rate_idx;
lq_sta->max_rate_idx = -1;
}
+ /* Treat uninitialized rate scaling data same as non-existing. */
+ if (lq_sta && !lq_sta->drv) {
+ IWL_DEBUG_RATE(priv, "Rate scaling not initialized yet.\n");
+ priv_sta = NULL;
+ }
+
/* Send management frames and NO_ACK data using lowest rate. */
if (rate_control_send_low(sta, priv_sta, txrc))
return;
rate_idx = lq_sta->last_txrate_idx;
- if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
- !lq_sta->ibss_sta_added) {
- u8 sta_id = iwl_find_station(priv, hdr->addr1);
-
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
- hdr->addr1);
- sta_id = iwl_add_station(priv, hdr->addr1,
- false, CMD_ASYNC, ht_cap);
- }
- if ((sta_id != IWL_INVALID_STATION)) {
- lq_sta->lq.sta_id = sta_id;
- lq_sta->lq.rs_table[0].rate_n_flags = 0;
- lq_sta->ibss_sta_added = 1;
- rs_initialize_lq(priv, conf, sta, lq_sta);
- }
- }
-
if (lq_sta->last_rate_n_flags & RATE_MCS_HT_MSK) {
rate_idx -= IWL_FIRST_OFDM_RATE;
/* 6M and 9M shared same MCS index */
return lq_sta;
}
-static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
- struct ieee80211_sta *sta, void *priv_sta)
+/*
+ * Called after adding a new station to initialize rate scaling
+ */
+void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_id)
{
int i, j;
- struct iwl_priv *priv = (struct iwl_priv *)priv_r;
+ struct ieee80211_hw *hw = priv->hw;
struct ieee80211_conf *conf = &priv->hw->conf;
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
- struct iwl_lq_sta *lq_sta = priv_sta;
+ struct iwl_station_priv *sta_priv;
+ struct iwl_lq_sta *lq_sta;
+ struct ieee80211_supported_band *sband;
+
+ sta_priv = (struct iwl_station_priv *) sta->drv_priv;
+ lq_sta = &sta_priv->lq_sta;
+ sband = hw->wiphy->bands[conf->channel->band];
- lq_sta->lq.sta_id = 0xff;
+
+ lq_sta->lq.sta_id = sta_id;
for (j = 0; j < LQ_SIZE; j++)
for (i = 0; i < IWL_RATE_COUNT; i++)
for (i = 0; i < IWL_RATE_COUNT; i++)
rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
- IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init ***\n");
+ IWL_DEBUG_RATE(priv, "LQ: *** rate scale station global init for station %d ***\n",
+ sta_id);
/* TODO: what is a good starting rate for STA? About middle? Maybe not
* the lowest or the highest rate.. Could consider using RSSI from
* previous packets? Need to have IEEE 802.1X auth succeed immediately
* after assoc.. */
- lq_sta->ibss_sta_added = 0;
- if (priv->iw_mode == NL80211_IFTYPE_AP) {
- u8 sta_id = iwl_find_station(priv,
- sta->addr);
-
- /* for IBSS the call are from tasklet */
- IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
-
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n", sta->addr);
- sta_id = iwl_add_station(priv, sta->addr, false,
- CMD_ASYNC, ht_cap);
- }
- if ((sta_id != IWL_INVALID_STATION)) {
- lq_sta->lq.sta_id = sta_id;
- lq_sta->lq.rs_table[0].rate_n_flags = 0;
- }
- /* FIXME: this is w/a remove it later */
- priv->assoc_station_added = 1;
- }
-
lq_sta->is_dup = 0;
lq_sta->max_rate_idx = -1;
lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX;
if (lq_sta->dbg_fixed_rate) {
rs_fill_link_cmd(NULL, lq_sta, lq_sta->dbg_fixed_rate);
- iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC);
+ iwl_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC, false);
}
return count;
}
#endif
+/*
+ * Initialization of rate scaling information is done by driver after
+ * the station is added. Since mac80211 calls this function before a
+ * station is added we ignore it.
+ */
+static void rs_rate_init_stub(void *priv_r, struct ieee80211_supported_band *sband,
+ struct ieee80211_sta *sta, void *priv_sta)
+{
+}
static struct rate_control_ops rs_ops = {
.module = NULL,
.name = RS_NAME,
.tx_status = rs_tx_status,
.get_rate = rs_get_rate,
- .rate_init = rs_rate_init,
+ .rate_init = rs_rate_init_stub,
.alloc = rs_alloc,
.free = rs_free,
.alloc_sta = rs_alloc_sta,
#include <net/mac80211.h>
#include <linux/etherdevice.h>
+#include <linux/sched.h>
#include "iwl-dev.h"
#include "iwl-core.h"
addr, priv->num_stations);
out:
+ /*
+ * It may be possible that more commands interacting with stations
+ * arrive before we completed processing the adding of
+ * station
+ */
+ if (ret != IWL_INVALID_STATION &&
+ (!(priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) ||
+ ((priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) &&
+ (priv->stations[ret].used & IWL_STA_UCODE_INPROGRESS)))) {
+ IWL_ERR(priv, "Requested station info for sta %d before ready. \n",
+ ret);
+ ret = IWL_INVALID_STATION;
+ }
spin_unlock_irqrestore(&priv->sta_lock, flags);
return ret;
}
priv->stations[sta_id].sta.mode ==
STA_CONTROL_MODIFY_MSK ? "Modified" : "Added",
addsta->sta.addr);
-
- /*
- * Determine if we wanted to modify or add a station,
- * if adding a station succeeded we have some more initialization
- * to do when using station notification. TODO
- */
-
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
.flags = flags,
.data = data,
};
+ u8 sta_id = sta->sta.sta_id;
+
+ IWL_DEBUG_INFO(priv, "Adding sta %u (%pM) %ssynchronously\n",
+ sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : "");
if (flags & CMD_ASYNC)
cmd.callback = iwl_add_sta_callback;
}
/**
- * iwl_add_station - Add station to tables in driver and device
+ * iwl_prep_station - Prepare station information for addition
+ *
+ * should be called with sta_lock held
*/
-u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags,
- struct ieee80211_sta_ht_cap *ht_info)
+static u8 iwl_prep_station(struct iwl_priv *priv, const u8 *addr,
+ bool is_ap,
+ struct ieee80211_sta_ht_cap *ht_info)
{
struct iwl_station_entry *station;
- unsigned long flags_spin;
int i;
- int sta_id = IWL_INVALID_STATION;
+ u8 sta_id = IWL_INVALID_STATION;
u16 rate;
- spin_lock_irqsave(&priv->sta_lock, flags_spin);
if (is_ap)
sta_id = IWL_AP_ID;
else if (is_broadcast_ether_addr(addr))
sta_id = i;
}
- /* These two conditions have the same outcome, but keep them separate
- since they have different meanings */
- if (unlikely(sta_id == IWL_INVALID_STATION)) {
- spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+ /*
+ * These two conditions have the same outcome, but keep them
+ * separate
+ */
+ if (unlikely(sta_id == IWL_INVALID_STATION))
+ return sta_id;
+
+ /*
+ * uCode is not able to deal with multiple requests to add a
+ * station. Keep track if one is in progress so that we do not send
+ * another.
+ */
+ if (priv->stations[sta_id].used & IWL_STA_UCODE_INPROGRESS) {
+ IWL_DEBUG_INFO(priv, "STA %d already in process of being added.\n",
+ sta_id);
return sta_id;
}
- if (priv->stations[sta_id].used &&
+ if ((priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) &&
+ (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE) &&
!compare_ether_addr(priv->stations[sta_id].sta.sta.addr, addr)) {
- spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+ IWL_DEBUG_ASSOC(priv, "STA %d (%pM) already added, not adding again.\n",
+ sta_id, addr);
return sta_id;
}
-
station = &priv->stations[sta_id];
station->used = IWL_STA_DRIVER_ACTIVE;
IWL_DEBUG_ASSOC(priv, "Add STA to driver ID %d: %pM\n",
/* Turn on both antennas for the station... */
station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK);
+ return sta_id;
+
+}
+
+#define STA_WAIT_TIMEOUT (HZ/2)
+
+/**
+ * iwl_add_station_common -
+ */
+int iwl_add_station_common(struct iwl_priv *priv, const u8 *addr,
+ bool is_ap,
+ struct ieee80211_sta_ht_cap *ht_info,
+ u8 *sta_id_r)
+{
+ struct iwl_station_entry *station;
+ unsigned long flags_spin;
+ int ret = 0;
+ u8 sta_id;
+
+ *sta_id_r = 0;
+ spin_lock_irqsave(&priv->sta_lock, flags_spin);
+ sta_id = iwl_prep_station(priv, addr, is_ap, ht_info);
+ if (sta_id == IWL_INVALID_STATION) {
+ IWL_ERR(priv, "Unable to prepare station %pM for addition\n",
+ addr);
+ spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+ return -EINVAL;
+ }
+
+ /*
+ * uCode is not able to deal with multiple requests to add a
+ * station. Keep track if one is in progress so that we do not send
+ * another.
+ */
+ if (priv->stations[sta_id].used & IWL_STA_UCODE_INPROGRESS) {
+ IWL_DEBUG_INFO(priv, "STA %d already in process of being added.\n",
+ sta_id);
+ spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+ return -EEXIST;
+ }
+
+ if ((priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE) &&
+ (priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) {
+ IWL_DEBUG_ASSOC(priv, "STA %d (%pM) already added, not adding again.\n",
+ sta_id, addr);
+ spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+ return -EEXIST;
+ }
+
+ priv->stations[sta_id].used |= IWL_STA_UCODE_INPROGRESS;
+ station = &priv->stations[sta_id];
spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
/* Add station to device's station table */
- iwl_send_add_sta(priv, &station->sta, flags);
- return sta_id;
-
+ ret = iwl_send_add_sta(priv, &station->sta, CMD_SYNC);
+ if (ret) {
+ IWL_ERR(priv, "Adding station %pM failed.\n", station->sta.sta.addr);
+ spin_lock_irqsave(&priv->sta_lock, flags_spin);
+ priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE;
+ priv->stations[sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
+ spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+ }
+ *sta_id_r = sta_id;
+ return ret;
}
-EXPORT_SYMBOL(iwl_add_station);
+EXPORT_SYMBOL(iwl_add_station_common);
-static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const u8 *addr)
+static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, bool is_ap)
{
- unsigned long flags;
- u8 sta_id = iwl_find_station(priv, addr);
+ int i, r;
+ struct iwl_link_quality_cmd link_cmd = {
+ .reserved1 = 0,
+ };
+ u32 rate_flags;
+
+ /* Set up the rate scaling to start at selected rate, fall back
+ * all the way down to 1M in IEEE order, and then spin on 1M */
+ if (is_ap)
+ r = IWL_RATE_54M_INDEX;
+ else if (priv->band == IEEE80211_BAND_5GHZ)
+ r = IWL_RATE_6M_INDEX;
+ else
+ r = IWL_RATE_1M_INDEX;
- BUG_ON(sta_id == IWL_INVALID_STATION);
+ for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+ rate_flags = 0;
+ if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE)
+ rate_flags |= RATE_MCS_CCK_MSK;
- IWL_DEBUG_ASSOC(priv, "Removed STA from Ucode: %pM\n", addr);
+ rate_flags |= first_antenna(priv->hw_params.valid_tx_ant) <<
+ RATE_MCS_ANT_POS;
- spin_lock_irqsave(&priv->sta_lock, flags);
+ link_cmd.rs_table[i].rate_n_flags =
+ iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags);
+ r = iwl_get_prev_ieee_rate(r);
+ }
- /* Ucode must be active and driver must be non active */
- if (priv->stations[sta_id].used != IWL_STA_UCODE_ACTIVE)
- IWL_ERR(priv, "removed non active STA %d\n", sta_id);
+ link_cmd.general_params.single_stream_ant_msk =
+ first_antenna(priv->hw_params.valid_tx_ant);
+ link_cmd.general_params.dual_stream_ant_msk = 3;
+ link_cmd.agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+ link_cmd.agg_params.agg_time_limit =
+ cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
- priv->stations[sta_id].used &= ~IWL_STA_UCODE_ACTIVE;
+ /* Update the rate scaling for control frame Tx to AP */
+ link_cmd.sta_id = is_ap ? IWL_AP_ID : priv->hw_params.bcast_sta_id;
- memset(&priv->stations[sta_id], 0, sizeof(struct iwl_station_entry));
- spin_unlock_irqrestore(&priv->sta_lock, flags);
+ iwl_send_cmd_pdu(priv, REPLY_TX_LINK_QUALITY_CMD,
+ sizeof(link_cmd), &link_cmd);
}
-static void iwl_remove_sta_callback(struct iwl_priv *priv,
- struct iwl_device_cmd *cmd,
- struct iwl_rx_packet *pkt)
+/*
+ * iwl_add_local_stations - Add stations not requested by mac80211
+ *
+ * This will be either the broadcast station or the bssid station needed by
+ * ad-hoc.
+ *
+ * Function sleeps.
+ */
+int iwl_add_local_station(struct iwl_priv *priv, const u8 *addr, bool init_rs)
{
- struct iwl_rem_sta_cmd *rm_sta =
- (struct iwl_rem_sta_cmd *)cmd->cmd.payload;
- const u8 *addr = rm_sta->addr;
+ int ret;
+ u8 sta_id;
- if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
- IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
- pkt->hdr.flags);
- return;
+ ret = iwl_add_station_common(priv, addr, 0, NULL, &sta_id);
+ if (ret) {
+ IWL_ERR(priv, "Unable to add station %pM\n", addr);
+ return ret;
}
- switch (pkt->u.rem_sta.status) {
- case REM_STA_SUCCESS_MSK:
- iwl_sta_ucode_deactivate(priv, addr);
- break;
- default:
- IWL_ERR(priv, "REPLY_REMOVE_STA failed\n");
- break;
- }
+ if (init_rs)
+ /* Set up default rate scaling table in device's station table */
+ iwl_sta_init_lq(priv, addr, false);
+ return 0;
+}
+EXPORT_SYMBOL(iwl_add_local_station);
+
+/**
+ * iwl_sta_ucode_deactivate - deactivate ucode status for a station
+ *
+ * priv->sta_lock must be held
+ */
+static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, u8 sta_id)
+{
+ /* Ucode must be active and driver must be non active */
+ if (priv->stations[sta_id].used != IWL_STA_UCODE_ACTIVE)
+ IWL_ERR(priv, "removed non active STA %u\n", sta_id);
+
+ priv->stations[sta_id].used &= ~IWL_STA_UCODE_ACTIVE;
+
+ memset(&priv->stations[sta_id], 0, sizeof(struct iwl_station_entry));
+ IWL_DEBUG_ASSOC(priv, "Removed STA %u\n", sta_id);
}
-static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr,
- u8 flags)
+static int iwl_send_remove_station(struct iwl_priv *priv,
+ struct iwl_station_entry *station)
{
struct iwl_rx_packet *pkt;
int ret;
+ unsigned long flags_spin;
struct iwl_rem_sta_cmd rm_sta_cmd;
struct iwl_host_cmd cmd = {
.id = REPLY_REMOVE_STA,
.len = sizeof(struct iwl_rem_sta_cmd),
- .flags = flags,
+ .flags = CMD_SYNC,
.data = &rm_sta_cmd,
};
memset(&rm_sta_cmd, 0, sizeof(rm_sta_cmd));
rm_sta_cmd.num_sta = 1;
- memcpy(&rm_sta_cmd.addr, addr , ETH_ALEN);
+ memcpy(&rm_sta_cmd.addr, &station->sta.sta.addr , ETH_ALEN);
+
+ cmd.flags |= CMD_WANT_SKB;
- if (flags & CMD_ASYNC)
- cmd.callback = iwl_remove_sta_callback;
- else
- cmd.flags |= CMD_WANT_SKB;
ret = iwl_send_cmd(priv, &cmd);
- if (ret || (flags & CMD_ASYNC))
+ if (ret)
return ret;
pkt = (struct iwl_rx_packet *)cmd.reply_page;
if (!ret) {
switch (pkt->u.rem_sta.status) {
case REM_STA_SUCCESS_MSK:
- iwl_sta_ucode_deactivate(priv, addr);
+ spin_lock_irqsave(&priv->sta_lock, flags_spin);
+ iwl_sta_ucode_deactivate(priv, station->sta.sta.sta_id);
+ spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
IWL_DEBUG_ASSOC(priv, "REPLY_REMOVE_STA PASSED\n");
break;
default:
/**
* iwl_remove_station - Remove driver's knowledge of station.
*/
-int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap)
+static int iwl_remove_station(struct iwl_priv *priv, struct ieee80211_sta *sta)
{
int sta_id = IWL_INVALID_STATION;
int i, ret = -EINVAL;
unsigned long flags;
+ bool is_ap = priv->iw_mode == NL80211_IFTYPE_STATION;
+ struct iwl_station_entry *station;
+
+ if (!iwl_is_ready(priv)) {
+ IWL_DEBUG_INFO(priv,
+ "Unable to remove station %pM, device not ready. \n",
+ sta->addr);
+ /*
+ * It is typical for stations to be removed when we are
+ * going down. Return success since device will be down
+ * soon anyway
+ */
+ return 0;
+ }
spin_lock_irqsave(&priv->sta_lock, flags);
if (is_ap)
sta_id = IWL_AP_ID;
- else if (is_broadcast_ether_addr(addr))
- sta_id = priv->hw_params.bcast_sta_id;
else
for (i = IWL_STA_ID; i < priv->hw_params.max_stations; i++)
if (priv->stations[i].used &&
!compare_ether_addr(priv->stations[i].sta.sta.addr,
- addr)) {
+ sta->addr)) {
sta_id = i;
break;
}
goto out;
IWL_DEBUG_ASSOC(priv, "Removing STA from driver:%d %pM\n",
- sta_id, addr);
+ sta_id, sta->addr);
if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) {
- IWL_ERR(priv, "Removing %pM but non DRIVER active\n",
- addr);
+ IWL_DEBUG_INFO(priv, "Removing %pM but non DRIVER active\n",
+ sta->addr);
goto out;
}
if (!(priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE)) {
- IWL_ERR(priv, "Removing %pM but non UCODE active\n",
- addr);
+ IWL_DEBUG_INFO(priv, "Removing %pM but non UCODE active\n",
+ sta->addr);
goto out;
}
BUG_ON(priv->num_stations < 0);
+ station = &priv->stations[sta_id];
spin_unlock_irqrestore(&priv->sta_lock, flags);
- ret = iwl_send_remove_station(priv, addr, CMD_ASYNC);
+ ret = iwl_send_remove_station(priv, station);
return ret;
out:
spin_unlock_irqrestore(&priv->sta_lock, flags);
*
* All stations considered active by driver, but not present in ucode, is
* restored.
+ *
+ * Function sleeps.
*/
void iwl_restore_stations(struct iwl_priv *priv)
{
+ struct iwl_station_entry *station;
unsigned long flags_spin;
int i;
bool found = false;
+ int ret;
if (!iwl_is_ready(priv)) {
IWL_DEBUG_INFO(priv, "Not ready yet, not restoring any stations.\n");
for (i = 0; i < priv->hw_params.max_stations; i++) {
if ((priv->stations[i].used & IWL_STA_UCODE_INPROGRESS)) {
- iwl_send_add_sta(priv, &priv->stations[i].sta,
- CMD_ASYNC);
+ spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+ station = &priv->stations[i];
+ ret = iwl_send_add_sta(priv, &priv->stations[i].sta, CMD_SYNC);
+ if (ret) {
+ IWL_ERR(priv, "Adding station %pM failed.\n",
+ station->sta.sta.addr);
+ spin_lock_irqsave(&priv->sta_lock, flags_spin);
+ priv->stations[i].used &= ~IWL_STA_DRIVER_ACTIVE;
+ priv->stations[i].used &= ~IWL_STA_UCODE_INPROGRESS;
+ spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+ }
+ /*
+ * Rate scaling has already been initialized, send
+ * current LQ command
+ */
+ if (station->lq)
+ iwl_send_lq_cmd(priv, station->lq, CMD_SYNC, true);
+ spin_lock_irqsave(&priv->sta_lock, flags_spin);
priv->stations[i].used &= ~IWL_STA_UCODE_INPROGRESS;
}
}
if (!found)
IWL_DEBUG_INFO(priv, "Restoring all known stations .... no stations to be restored.\n");
else
- IWL_DEBUG_INFO(priv, "Restoring all known stations .... in progress.\n");
+ IWL_DEBUG_INFO(priv, "Restoring all known stations .... complete.\n");
}
EXPORT_SYMBOL(iwl_restore_stations);
}
#endif
+/**
+ * iwl_send_lq_cmd() - Send link quality command
+ * @init: This command is sent as part of station initialization right
+ * after station has been added.
+ *
+ * The link quality command is sent as the last step of station creation.
+ * This is the special case in which init is set and we call a callback in
+ * this case to clear the state indicating that station creation is in
+ * progress.
+ */
int iwl_send_lq_cmd(struct iwl_priv *priv,
- struct iwl_link_quality_cmd *lq, u8 flags)
+ struct iwl_link_quality_cmd *lq, u8 flags, bool init)
{
+ int ret = 0;
+ unsigned long flags_spin;
+
struct iwl_host_cmd cmd = {
.id = REPLY_TX_LINK_QUALITY_CMD,
.len = sizeof(struct iwl_link_quality_cmd),
lq->sta_id = IWL_AP_ID;
iwl_dump_lq_cmd(priv, lq);
+ BUG_ON(init && (cmd.flags & CMD_ASYNC));
- if (iwl_is_associated(priv) && priv->assoc_station_added)
- return iwl_send_cmd(priv, &cmd);
+ iwl_dump_lq_cmd(priv, lq);
+ ret = iwl_send_cmd(priv, &cmd);
+ if (ret || (cmd.flags & CMD_ASYNC))
+ return ret;
+ if (init) {
+ IWL_DEBUG_INFO(priv, "init LQ command complete, clearing sta addition status for sta %d \n",
+ lq->sta_id);
+ spin_lock_irqsave(&priv->sta_lock, flags_spin);
+ priv->stations[lq->sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
+ spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+ }
return 0;
}
EXPORT_SYMBOL(iwl_send_lq_cmd);
/**
- * iwl_sta_init_lq - Initialize a station's hardware rate table
- *
- * The uCode's station table contains a table of fallback rates
- * for automatic fallback during transmission.
- *
- * NOTE: This sets up a default set of values. These will be replaced later
- * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of
- * rc80211_simple.
- *
- * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
- * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
- * which requires station table entry to exist).
- */
-static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, bool is_ap)
-{
- int i, r;
- struct iwl_link_quality_cmd link_cmd = {
- .reserved1 = 0,
- };
- u32 rate_flags;
-
- /* Set up the rate scaling to start at selected rate, fall back
- * all the way down to 1M in IEEE order, and then spin on 1M */
- if (is_ap)
- r = IWL_RATE_54M_INDEX;
- else if (priv->band == IEEE80211_BAND_5GHZ)
- r = IWL_RATE_6M_INDEX;
- else
- r = IWL_RATE_1M_INDEX;
-
- for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
- rate_flags = 0;
- if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE)
- rate_flags |= RATE_MCS_CCK_MSK;
-
- rate_flags |= first_antenna(priv->hw_params.valid_tx_ant) <<
- RATE_MCS_ANT_POS;
-
- link_cmd.rs_table[i].rate_n_flags =
- iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags);
- r = iwl_get_prev_ieee_rate(r);
- }
-
- link_cmd.general_params.single_stream_ant_msk =
- first_antenna(priv->hw_params.valid_tx_ant);
- link_cmd.general_params.dual_stream_ant_msk = 3;
- link_cmd.agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
- link_cmd.agg_params.agg_time_limit =
- cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
-
- /* Update the rate scaling for control frame Tx to AP */
- link_cmd.sta_id = is_ap ? IWL_AP_ID : priv->hw_params.bcast_sta_id;
-
- iwl_send_cmd_pdu_async(priv, REPLY_TX_LINK_QUALITY_CMD,
- sizeof(link_cmd), &link_cmd, NULL);
-}
-
-/**
- * iwl_rxon_add_station - add station into station table.
- *
- * there is only one AP station with id= IWL_AP_ID
- * NOTE: mutex must be held before calling this function
- */
-int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap)
-{
- struct ieee80211_sta *sta;
- struct ieee80211_sta_ht_cap ht_config;
- struct ieee80211_sta_ht_cap *cur_ht_config = NULL;
- u8 sta_id;
-
- /*
- * Set HT capabilities. It is ok to set this struct even if not using
- * HT config: the priv->current_ht_config.is_ht flag will just be false
- */
- rcu_read_lock();
- sta = ieee80211_find_sta(priv->vif, addr);
- if (sta) {
- memcpy(&ht_config, &sta->ht_cap, sizeof(ht_config));
- cur_ht_config = &ht_config;
- }
- rcu_read_unlock();
-
- /* Add station to device's station table */
- sta_id = iwl_add_station(priv, addr, is_ap, CMD_SYNC, cur_ht_config);
-
- /* Set up default rate scaling table in device's station table */
- iwl_sta_init_lq(priv, addr, is_ap);
-
- return sta_id;
-}
-EXPORT_SYMBOL(iwl_rxon_add_station);
-
-/**
- * iwl_sta_init_bcast_lq - Initialize a bcast station's hardware rate table
- *
- * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
- * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
- * which requires station table entry to exist).
- */
-static void iwl_sta_init_bcast_lq(struct iwl_priv *priv)
-{
- int i, r;
- struct iwl_link_quality_cmd link_cmd = {
- .reserved1 = 0,
- };
- u32 rate_flags;
-
- /* Set up the rate scaling to start at selected rate, fall back
- * all the way down to 1M in IEEE order, and then spin on 1M */
- if (priv->band == IEEE80211_BAND_5GHZ)
- r = IWL_RATE_6M_INDEX;
- else
- r = IWL_RATE_1M_INDEX;
-
- for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
- rate_flags = 0;
- if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE)
- rate_flags |= RATE_MCS_CCK_MSK;
-
- rate_flags |= first_antenna(priv->hw_params.valid_tx_ant) <<
- RATE_MCS_ANT_POS;
-
- link_cmd.rs_table[i].rate_n_flags =
- iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags);
- r = iwl_get_prev_ieee_rate(r);
- }
-
- link_cmd.general_params.single_stream_ant_msk =
- first_antenna(priv->hw_params.valid_tx_ant);
- link_cmd.general_params.dual_stream_ant_msk = 3;
- link_cmd.agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
- link_cmd.agg_params.agg_time_limit =
- cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
-
- /* Update the rate scaling for control frame Tx to AP */
- link_cmd.sta_id = priv->hw_params.bcast_sta_id;
-
- iwl_send_cmd_pdu_async(priv, REPLY_TX_LINK_QUALITY_CMD,
- sizeof(link_cmd), &link_cmd, NULL);
-}
-
-
-/**
* iwl_add_bcast_station - add broadcast station into station table.
*/
void iwl_add_bcast_station(struct iwl_priv *priv)
{
IWL_DEBUG_INFO(priv, "Adding broadcast station to station table\n");
- iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL);
-
- /* Set up default rate scaling table in device's station table */
- iwl_sta_init_bcast_lq(priv);
+ iwl_add_local_station(priv, iwl_bcast_addr, true);
}
EXPORT_SYMBOL(iwl_add_bcast_station);
void iwl3945_add_bcast_station(struct iwl_priv *priv)
{
IWL_DEBUG_INFO(priv, "Adding broadcast station to station table\n");
- iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL);
+ iwl_add_local_station(priv, iwl_bcast_addr, false);
+ /*
+ * It is assumed that when station is added more initialization
+ * needs to be done, but for 3945 it is not the case and we can
+ * just release station table access right here.
+ */
+ priv->stations[priv->hw_params.bcast_sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
+
}
EXPORT_SYMBOL(iwl3945_add_bcast_station);
/* If we are a client station in a BSS network, use the special
* AP station entry (that's the only station we communicate with) */
case NL80211_IFTYPE_STATION:
+ /*
+ * If addition of station not complete yet, which means
+ * that rate scaling has not been initialized, then return
+ * the broadcast station.
+ */
+ if (!(priv->stations[IWL_AP_ID].used & IWL_STA_UCODE_ACTIVE))
+ return priv->hw_params.bcast_sta_id;
return IWL_AP_ID;
/* If we are an AP, then find the station, or use BCAST */
if (sta_id != IWL_INVALID_STATION)
return sta_id;
- /* Create new station table entry */
- sta_id = iwl_add_station(priv, hdr->addr1, false,
- CMD_ASYNC, NULL);
-
- if (sta_id != IWL_INVALID_STATION)
- return sta_id;
-
IWL_DEBUG_DROP(priv, "Station %pM not in station map. "
"Defaulting to broadcast...\n",
hdr->addr1);
iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
}
+
+int iwl_mac_sta_remove(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ int ret;
+ struct iwl_priv *priv = hw->priv;
+ IWL_DEBUG_INFO(priv, "received request to remove station %pM\n",
+ sta->addr);
+ ret = iwl_remove_station(priv, sta);
+ if (ret)
+ IWL_ERR(priv, "Error removing station %pM\n",
+ sta->addr);
+ return ret;
+}
+EXPORT_SYMBOL(iwl_mac_sta_remove);
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff