.hardreset = sata_sff_hardreset,
.postreset = ata_sff_postreset,
.error_handler = ata_sff_error_handler,
- .post_internal_cmd = ata_sff_post_internal_cmd,
.sff_dev_select = ata_sff_dev_select,
.sff_check_status = ata_sff_check_status,
EXPORT_SYMBOL_GPL(ata_sff_drain_fifo);
/**
- * ata_sff_error_handler - Stock error handler for BMDMA controller
+ * ata_sff_error_handler - Stock error handler for SFF controller
* @ap: port to handle error for
*
* Stock error handler for SFF controller. It can handle both
ata_reset_fn_t hardreset = ap->ops->hardreset;
struct ata_queued_cmd *qc;
unsigned long flags;
- bool thaw = false;
qc = __ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
qc = NULL;
- /* reset PIO HSM and stop DMA engine */
spin_lock_irqsave(ap->lock, flags);
- if (ap->ioaddr.bmdma_addr &&
- qc && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA)) {
- u8 host_stat;
-
- host_stat = ap->ops->bmdma_status(ap);
-
- /* BMDMA controllers indicate host bus error by
- * setting DMA_ERR bit and timing out. As it wasn't
- * really a timeout event, adjust error mask and
- * cancel frozen state.
- */
- if (qc->err_mask == AC_ERR_TIMEOUT
- && (host_stat & ATA_DMA_ERR)) {
- qc->err_mask = AC_ERR_HOST_BUS;
- thaw = true;
- }
-
- ap->ops->bmdma_stop(qc);
-
- /* if we're gonna thaw, make sure IRQ is clear */
- if (thaw) {
- ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
-
- spin_unlock_irqrestore(ap->lock, flags);
- ata_eh_thaw_port(ap);
- spin_lock_irqsave(ap->lock, flags);
- }
- }
-
- /* We *MUST* do FIFO draining before we issue a reset as several
- * devices helpfully clear their internal state and will lock solid
- * if we touch the data port post reset. Pass qc in case anyone wants
- * to do different PIO/DMA recovery or has per command fixups
+ /*
+ * We *MUST* do FIFO draining before we issue a reset as
+ * several devices helpfully clear their internal state and
+ * will lock solid if we touch the data port post reset. Pass
+ * qc in case anyone wants to do different PIO/DMA recovery or
+ * has per command fixups
*/
if (ap->ops->sff_drain_fifo)
ap->ops->sff_drain_fifo(qc);
spin_unlock_irqrestore(ap->lock, flags);
- /* PIO and DMA engines have been stopped, perform recovery */
-
- /* Ignore ata_sff_softreset if ctl isn't accessible and
- * built-in hardresets if SCR access isn't available.
- */
+ /* ignore ata_sff_softreset if ctl isn't accessible */
if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr)
softreset = NULL;
- if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link))
+
+ /* ignore built-in hardresets if SCR access is not available */
+ if ((hardreset == sata_std_hardreset ||
+ hardreset == sata_sff_hardreset) && !sata_scr_valid(&ap->link))
hardreset = NULL;
ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
EXPORT_SYMBOL_GPL(ata_sff_error_handler);
/**
- * ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller
- * @qc: internal command to clean up
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned long flags;
-
- spin_lock_irqsave(ap->lock, flags);
-
- if (ap->ioaddr.bmdma_addr)
- ap->ops->bmdma_stop(qc);
-
- spin_unlock_irqrestore(ap->lock, flags);
-}
-EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
-
-/**
* ata_sff_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
*
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
/**
+ * ata_bmdma_error_handler - Stock error handler for BMDMA controller
+ * @ap: port to handle error for
+ *
+ * Stock error handler for BMDMA controller. It can handle both
+ * PATA and SATA controllers. Most BMDMA controllers should be
+ * able to use this EH as-is or with some added handling before
+ * and after.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_error_handler(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ bool thaw = false;
+
+ qc = __ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
+ qc = NULL;
+
+ /* reset PIO HSM and stop DMA engine */
+ spin_lock_irqsave(ap->lock, flags);
+
+ if (qc && ata_is_dma(qc->tf.protocol)) {
+ u8 host_stat;
+
+ host_stat = ap->ops->bmdma_status(ap);
+
+ /* BMDMA controllers indicate host bus error by
+ * setting DMA_ERR bit and timing out. As it wasn't
+ * really a timeout event, adjust error mask and
+ * cancel frozen state.
+ */
+ if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) {
+ qc->err_mask = AC_ERR_HOST_BUS;
+ thaw = true;
+ }
+
+ ap->ops->bmdma_stop(qc);
+
+ /* if we're gonna thaw, make sure IRQ is clear */
+ if (thaw) {
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
+ }
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (thaw)
+ ata_eh_thaw_port(ap);
+
+ ata_sff_error_handler(ap);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
+
+/**
+ * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for BMDMA
+ * @qc: internal command to clean up
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned long flags;
+
+ if (ata_is_dma(qc->tf.protocol)) {
+ spin_lock_irqsave(ap->lock, flags);
+ ap->ops->bmdma_stop(qc);
+ spin_unlock_irqrestore(ap->lock, flags);
+ }
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
+
+/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff