* Title: MPI Message independent structures and definitions
* Creation Date: July 27, 2000
*
- * mpi.h Version: 01.05.13
+ * mpi.h Version: 01.05.16
*
* Version History
* ---------------
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
* 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
* 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT.
+ * 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT.
+ * 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT.
+ * 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
/* Note: The major versions of 0xe0 through 0xff are reserved */
/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT (0x10)
+#define MPI_HEADER_VERSION_UNIT (0x13)
#define MPI_HEADER_VERSION_DEV (0x00)
#define MPI_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI_HEADER_VERSION_UNIT_SHIFT (8)
* Title: MPI Config message, structures, and Pages
* Creation Date: July 27, 2000
*
- * mpi_cnfg.h Version: 01.05.15
+ * mpi_cnfg.h Version: 01.05.18
*
* Version History
* ---------------
* Expander Page 0 Flags field.
* Fixed define for
* MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ * define.
+ * Added BIOS Page 4 structure.
+ * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ * Physcial Disk Page 1.
+ * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of
+ * Manufacturing Page 4.
+ * Added Solid State Drives Supported bit to IOC Page 6
+ * Capabilities Flags.
+ * Added new value for AccessStatus field of SAS Device
+ * Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field
+ * to control coercion size and the mixing of SAS and SATA
+ * SSD drives.
* --------------------------------------------------------------------------
*/
#define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01)
/* defines for the ExtFlags field */
+#define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE (0x0180)
+#define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE (7)
+#define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE (0)
+#define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE (1)
+
+#define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA (0x0040)
+#define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD (0x0020)
+#define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT (0x0010)
#define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA (0x0008)
#define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE (0x0004)
#define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE (0x0002)
/* IOC Page 6 Capabilities Flags */
+#define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT (0x00000020)
+#define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT (0x00000010)
#define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING (0x00000008)
#define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE (0x00000006)
#define MPI_BIOSPAGE2_FORM_SAS_WWN (0x05)
#define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
+typedef struct _CONFIG_PAGE_BIOS_4
+{
+ CONFIG_PAGE_HEADER Header; /* 00h */
+ U64 ReassignmentBaseWWID; /* 04h */
+} CONFIG_PAGE_BIOS_4, MPI_POINTER PTR_CONFIG_PAGE_BIOS_4,
+ BIOSPage4_t, MPI_POINTER pBIOSPage4_t;
+
+#define MPI_BIOSPAGE4_PAGEVERSION (0x00)
+
/****************************************************************************
* SCSI Port Config Pages
#define MPI_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
#define MPI_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength or NumPhysDiskPaths at runtime.
+ */
+#ifndef MPI_RAID_PHYS_DISK1_PATH_MAX
+#define MPI_RAID_PHYS_DISK1_PATH_MAX (1)
+#endif
+
typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1
{
CONFIG_PAGE_HEADER Header; /* 00h */
U8 PhysDiskNum; /* 05h */
U16 Reserved2; /* 06h */
U32 Reserved1; /* 08h */
- RAID_PHYS_DISK1_PATH Path[1]; /* 0Ch */
+ RAID_PHYS_DISK1_PATH Path[MPI_RAID_PHYS_DISK1_PATH_MAX];/* 0Ch */
} CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1,
RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t;
#define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
#define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
#define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
+#define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
/* specific values for SATA Init failures */
#define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
#define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
/*
- * Copyright (c) 2000-2004 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_fc.h
MPI Header File Change History
==============================
- Copyright (c) 2000-2007 LSI Corporation.
+ Copyright (c) 2000-2008 LSI Corporation.
---------------------------------------
- Header Set Release Version: 01.05.16
- Header Set Release Date: 05-24-07
+ Header Set Release Version: 01.05.19
+ Header Set Release Date: 03-28-08
---------------------------------------
Filename Current version Prior version
---------- --------------- -------------
- mpi.h 01.05.13 01.05.12
- mpi_ioc.h 01.05.14 01.05.13
- mpi_cnfg.h 01.05.15 01.05.14
+ mpi.h 01.05.16 01.05.15
+ mpi_ioc.h 01.05.16 01.05.15
+ mpi_cnfg.h 01.05.18 01.05.17
mpi_init.h 01.05.09 01.05.09
mpi_targ.h 01.05.06 01.05.06
mpi_fc.h 01.05.01 01.05.01
mpi_lan.h 01.05.01 01.05.01
- mpi_raid.h 01.05.03 01.05.03
+ mpi_raid.h 01.05.05 01.05.05
mpi_tool.h 01.05.03 01.05.03
mpi_inb.h 01.05.01 01.05.01
- mpi_sas.h 01.05.04 01.05.04
+ mpi_sas.h 01.05.05 01.05.05
mpi_type.h 01.05.02 01.05.02
- mpi_history.txt 01.05.14 01.05.14
+ mpi_history.txt 01.05.19 01.05.18
* Date Version Description
* 03-27-06 01.05.11 Bumped MPI_HEADER_VERSION_UNIT.
* 10-11-06 01.05.12 Bumped MPI_HEADER_VERSION_UNIT.
* 05-24-07 01.05.13 Bumped MPI_HEADER_VERSION_UNIT.
+ * 08-07-07 01.05.14 Bumped MPI_HEADER_VERSION_UNIT.
+ * 01-15-08 01.05.15 Bumped MPI_HEADER_VERSION_UNIT.
+ * 03-28-08 01.05.16 Bumped MPI_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
mpi_ioc.h
* 08-08-01 01.02.01 Original release for v1.2 work.
* New format for FWVersion and ProductId in
* MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- * 08-31-01 01.02.02 Added event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
+ * 08-31-01 01.02.02 Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
* related structure and defines.
* Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
* Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
* 10-11-06 01.05.12 Added MPI_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED.
* Added MaxInitiators field to PortFacts reply.
* Added SAS Device Status Change ReasonCode for
- * asynchronous notification.
+ * asynchronous notificaiton.
* Added MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE and event
* data structure.
* Added new ImageType values for FWDownload and FWUpload
* added _MULTI_PORT_DOMAIN.
* 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request.
* Added Common Boot Block type to FWUpload Request.
+ * 08-07-07 01.05.15 Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ * Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ * MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ * Added SASAddress field to SAS Initiator Device Table
+ * Overflow event data structure.
+ * 03-28-08 01.05.16 Added two new ReasonCode values to SAS Device Status
+ * Change Event data to indicate completion of internally
+ * generated task management.
+ * Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ * Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
* --------------------------------------------------------------------------
mpi_cnfg.h
* Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
* page and updated the page version.
* Added Information field and _INFO_PARAMS_NEGOTIATED
- * definition to SCSI_DEVICE_0 page.
+ * definitionto SCSI_DEVICE_0 page.
* 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the
* page version.
* Added BucketsRemaining to LAN_1 page, redefined the
* Expander Page 0 Flags field.
* Fixed define for
* MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED.
+ * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
+ * define.
+ * Added BIOS Page 4 structure.
+ * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
+ * Physcial Disk Page 1.
+ * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of
+ * Manufacturing Page 4.
+ * Added Solid State Drives Supported bit to IOC Page 6
+ * Capabilities Flags.
+ * Added new value for AccessStatus field of SAS Device
+ * Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field
+ * to control coercion size and the mixing of SAS and SATA
+ * SSD drives.
* --------------------------------------------------------------------------
mpi_init.h
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
* 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and
* associated defines.
+ * 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord
+ * for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ * 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
* --------------------------------------------------------------------------
mpi_tool.h
* reply.
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
* Unit Control request.
+ * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ * including adding IOCParameter and IOCParameter value
+ * fields to SAS IO Unit Control Request.
+ * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
* --------------------------------------------------------------------------
mpi_type.h
mpi_history.txt Parts list history
-Filename 01.05.15 01.05.15
----------- -------- --------
-mpi.h 01.05.12 01.05.13
-mpi_ioc.h 01.05.13 01.05.14
-mpi_cnfg.h 01.05.14 01.05.15
-mpi_init.h 01.05.09 01.05.09
-mpi_targ.h 01.05.06 01.05.06
-mpi_fc.h 01.05.01 01.05.01
-mpi_lan.h 01.05.01 01.05.01
-mpi_raid.h 01.05.03 01.05.03
-mpi_tool.h 01.05.03 01.05.03
-mpi_inb.h 01.05.01 01.05.01
-mpi_sas.h 01.05.04 01.05.04
-mpi_type.h 01.05.02 01.05.02
+Filename 01.05.19 01.05.18 01.05.17 01.05.16 01.05.15
+---------- -------- -------- -------- -------- --------
+mpi.h 01.05.16 01.05.15 01.05.14 01.05.13 01.05.12
+mpi_ioc.h 01.05.16 01.05.15 01.05.15 01.05.14 01.05.13
+mpi_cnfg.h 01.05.18 01.05.17 01.05.16 01.05.15 01.05.14
+mpi_init.h 01.05.09 01.05.09 01.05.09 01.05.09 01.05.09
+mpi_targ.h 01.05.06 01.05.06 01.05.06 01.05.06 01.05.06
+mpi_fc.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_lan.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_raid.h 01.05.05 01.05.05 01.05.04 01.05.03 01.05.03
+mpi_tool.h 01.05.03 01.05.03 01.05.03 01.05.03 01.05.03
+mpi_inb.h 01.05.01 01.05.01 01.05.01 01.05.01 01.05.01
+mpi_sas.h 01.05.05 01.05.05 01.05.04 01.05.04 01.05.04
+mpi_type.h 01.05.02 01.05.02 01.05.02 01.05.02 01.05.02
Filename 01.05.14 01.05.13 01.05.12 01.05.11 01.05.10 01.05.09
---------- -------- -------- -------- -------- -------- --------
/*
- * Copyright (c) 2000-2007 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_init.h
/*
- * Copyright (c) 2000-2007 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: August 11, 2000
*
- * mpi_ioc.h Version: 01.05.14
+ * mpi_ioc.h Version: 01.05.16
*
* Version History
* ---------------
* added _MULTI_PORT_DOMAIN.
* 05-24-07 01.05.14 Added Common Boot Block type to FWDownload Request.
* Added Common Boot Block type to FWUpload Request.
+ * 08-07-07 01.05.15 Added MPI_EVENT_SAS_INIT_RC_REMOVED define.
+ * Added MPI_EVENT_IR2_RC_DUAL_PORT_ADDED and
+ * MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED for IR2 event data.
+ * Added SASAddress field to SAS Initiator Device Table
+ * Overflow event data structure.
+ * 03-28-08 01.05.16 Added two new ReasonCode values to SAS Device Status
+ * Change Event data to indicate completion of internally
+ * generated task management.
+ * Added MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE define.
+ * Added MPI_EVENT_SAS_INIT_RC_INACCESSIBLE define.
* --------------------------------------------------------------------------
*/
#define MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
#define MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
#define MPI_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_INTERNAL_DEV_RESET (0x0E)
+#define MPI_EVENT_SAS_DEV_STAT_RC_CMPL_TASK_ABORT_INTERNAL (0x0F)
/* SCSI Event data for Queue Full event */
#define MPI_EVENT_IR2_RC_PD_REMOVED (0x05)
#define MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED (0x06)
#define MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR (0x07)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_ADDED (0x08)
+#define MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED (0x09)
/* defines for logical disk states */
#define MPI_LD_STATE_OPTIMAL (0x00)
#define MPI_EVENT_DSCVRY_ERR_DS_UNSUPPORTED_DEVICE (0x00000800)
#define MPI_EVENT_DSCVRY_ERR_DS_MAX_SATA_TARGETS (0x00001000)
#define MPI_EVENT_DSCVRY_ERR_DS_MULTI_PORT_DOMAIN (0x00002000)
+#define MPI_EVENT_DSCVRY_ERR_DS_SATA_INIT_FAILURE (0x00004000)
/* SAS SMP Error Event data */
/* defines for the ReasonCode field of the SAS Initiator Device Status Change event */
#define MPI_EVENT_SAS_INIT_RC_ADDED (0x01)
+#define MPI_EVENT_SAS_INIT_RC_REMOVED (0x02)
+#define MPI_EVENT_SAS_INIT_RC_INACCESSIBLE (0x03)
/* SAS Initiator Device Table Overflow Event data */
U8 MaxInit; /* 00h */
U8 CurrentInit; /* 01h */
U16 Reserved1; /* 02h */
+ U64 SASAddress; /* 04h */
} EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
MPI_POINTER PTR_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
MpiEventDataSasInitTableOverflow_t,
/*
- * Copyright (c) 2000-2004 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_lan.h
/*
- * Copyright (c) 2000-2001 LSI Corporation. All rights reserved.
+ * Copyright (c) 2000-2008 LSI Corporation. All rights reserved.
*
* NAME: fc_log.h
* SUMMARY: MPI IocLogInfo definitions for the SYMFC9xx chips
/***************************************************************************
* *
- * Copyright 2003 LSI Corporation. All rights reserved. *
+ * Copyright (c) 2000-2008 LSI Corporation. All rights reserved. *
* *
* Description *
* ------------ *
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO (0x00070004)
#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
+#define IOP_LOGINFO_CODE_LOG_TIMESTAMP_EVENT (0x00080000)
+
/****************************************************************************/
/* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL */
/****************************************************************************/
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_OPEN_TIMEOUT_EXP (0x0000000C)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_UNUSED_0D (0x0000000D)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_DVTBLE_ACCSS_FAIL (0x0000000E)
-#define PL_LOGINFO_SUB CODE_OPEN_FAIL_BAD_DEST (0x00000011)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_BAD_DEST (0x00000011)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RATE_NOT_SUPP (0x00000012)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_PROT_NOT_SUPP (0x00000013)
#define PL_LOGINFO_SUB_CODE_OPEN_FAIL_RESERVED_ABANDON0 (0x00000014)
#define PL_LOGINFO_SUB_CODE_INVALID_SGL (0x00000200)
#define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH (0x00000300)
-#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400) /* Bits 0-3 encode Transport Status Register (offset 0x08) */
- /* Bit 0 is Status Bit 0: FrameXferErr */
- /* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
- /* Bit 3 is Status Bit 18 WriteDataLengthGTDataLengthErr */
+#define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR (0x00000400)
+/* Bits 0-3 encode Transport Status Register (offset 0x08) */
+/* Bit 0 is Status Bit 0: FrameXferErr */
+/* Bit 1 & 2 are Status Bits 16 and 17: FrameXmitErrStatus */
+/* Bit 3 is Status Bit 18 WriteDataLenghtGTDataLengthErr */
#define PL_LOGINFO_SUB_CODE_TX_FM_CONNECTED_LOW (0x00000500)
#define PL_LOGINFO_SUB_CODE_SATA_NON_NCQ_RW_ERR_BIT_SET (0x00000600)
#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET (0x00000E01)
#define PL_LOGINFO_SUB_CODE_SECOND_OPEN (0x00000F00)
#define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT (0x00001000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_SATA_CONNECTION (0x00002000)
+/* not currently used in mainline */
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK (0x00003000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_STUCK_LINK_AIP (0x00004000)
+#define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD (0x00005000)
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE (0x00200000) /* Can't get SMP Frame */
#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR (0x00200010) /* Error occured on SMP Read */
#define IR_LOGINFO_VOLUME_ACTIVATE_VOLUME_FAILED (0x00010014)
/* Activation failed trying to import the volume */
#define IR_LOGINFO_VOLUME_ACTIVATING_IMPORT_VOLUME_FAILED (0x00010015)
+/* Activation failed trying to import the volume */
+#define IR_LOGINFO_VOLUME_ACTIVATING_TOO_MANY_PHYS_DISKS (0x00010016)
/* Phys Disk failed, too many phys disks */
#define IR_LOGINFO_PHYSDISK_CREATE_TOO_MANY_DISKS (0x00010020)
/* Compatibility Error : IME size limited to < 2TB */
#define IR_LOGINFO_COMPAT_ERROR_IME_VOL_NOT_CURRENTLY_SUPPORTED (0x0001003D)
+/* Device Firmware Update: DFU can only be started once */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DFU_IN_PROGRESS (0x00010050)
+/* Device Firmware Update: Volume must be Optimal/Active/non-Quiesced */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_DEVICE_IN_INVALID_STATE (0x00010051)
+/* Device Firmware Update: DFU Timeout cannot be zero */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_INVALID_TIMEOUT (0x00010052)
+/* Device Firmware Update: CREATE TIMER FAILED */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_NO_TIMERS (0x00010053)
+/* Device Firmware Update: Failed to read SAS_IO_UNIT_PG_1 */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_READING_CFG_PAGE (0x00010054)
+/* Device Firmware Update: Invalid SAS_IO_UNIT_PG_1 value(s) */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_PORT_IO_TIMEOUTS_REQUIRED (0x00010055)
+/* Device Firmware Update: Unable to allocate memory for page */
+#define IR_LOGINFO_DEV_FW_UPDATE_ERR_ALLOC_CFG_PAGE (0x00010056)
+
/****************************************************************************/
/* Defines for convenience */
/*
- * Copyright (c) 2001-2007 LSI Corporation.
+ * Copyright (c) 2001-2008 LSI Corporation.
*
*
* Name: mpi_raid.h
* Title: MPI RAID message and structures
* Creation Date: February 27, 2001
*
- * mpi_raid.h Version: 01.05.03
+ * mpi_raid.h Version: 01.05.05
*
* Version History
* ---------------
* _SET_RESYNC_RATE and _SET_DATA_SCRUB_RATE.
* 02-28-07 01.05.03 Added new RAID Action, Device FW Update Mode, and
* associated defines.
+ * 08-07-07 01.05.04 Added Disable Full Rebuild bit to the ActionDataWord
+ * for the RAID Action MPI_RAID_ACTION_DISABLE_VOLUME.
+ * 01-15-08 01.05.05 Added define for MPI_RAID_ACTION_SET_VOLUME_NAME.
* --------------------------------------------------------------------------
*/
#define MPI_RAID_ACTION_SET_RESYNC_RATE (0x13)
#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE (0x14)
#define MPI_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15)
+#define MPI_RAID_ACTION_SET_VOLUME_NAME (0x16)
/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC (0x00000001)
#define MPI_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
#define MPI_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000002)
+/* ActionDataWord defines for use with MPI_RAID_ACTION_DISABLE_VOLUME action */
+#define MPI_RAID_ACTION_ADATA_DISABLE_FULL_REBUILD (0x00000001)
+
/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL (0x00000001)
/*
- * Copyright (c) 2004-2006 LSI Corporation.
+ * Copyright (c) 2004-2008 LSI Corporation.
*
*
* Name: mpi_sas.h
* Title: MPI Serial Attached SCSI structures and definitions
* Creation Date: August 19, 2004
*
- * mpi_sas.h Version: 01.05.04
+ * mpi_sas.h Version: 01.05.05
*
* Version History
* ---------------
* reply.
* 10-11-06 01.05.04 Fixed the name of a define for Operation field of SAS IO
* Unit Control request.
+ * 01-15-08 01.05.05 Added support for MPI_SAS_OP_SET_IOC_PARAMETER,
+ * including adding IOCParameter and IOCParameter value
+ * fields to SAS IO Unit Control Request.
+ * Added MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC define.
* --------------------------------------------------------------------------
*/
* Values for the SAS DeviceInfo field used in SAS Device Status Change Event
* data and SAS IO Unit Configuration pages.
*/
+#define MPI_SAS_DEVICE_INFO_PRODUCT_SPECIFIC (0xF0000000)
+
#define MPI_SAS_DEVICE_INFO_SEP (0x00004000)
#define MPI_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
#define MPI_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
U8 ChainOffset; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
- U8 Reserved3; /* 06h */
+ U8 IOCParameter; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U8 TargetID; /* 0Ch */
U8 PrimFlags; /* 0Fh */
U32 Primitive; /* 10h */
U64 SASAddress; /* 14h */
- U32 Reserved4; /* 1Ch */
+ U32 IOCParameterValue; /* 1Ch */
} MSG_SAS_IOUNIT_CONTROL_REQUEST, MPI_POINTER PTR_MSG_SAS_IOUNIT_CONTROL_REQUEST,
SasIoUnitControlRequest_t, MPI_POINTER pSasIoUnitControlRequest_t;
#define MPI_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C)
#define MPI_SAS_OP_TRANSMIT_REMOVE_DEVICE (0x0D) /* obsolete name */
#define MPI_SAS_OP_REMOVE_DEVICE (0x0D)
+#define MPI_SAS_OP_SET_IOC_PARAMETER (0x0E)
+#define MPI_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
/* values for the PrimFlags field */
#define MPI_SAS_PRIMFLAGS_SINGLE (0x08)
U8 MsgLength; /* 02h */
U8 Function; /* 03h */
U16 DevHandle; /* 04h */
- U8 Reserved3; /* 06h */
+ U8 IOCParameter; /* 06h */
U8 MsgFlags; /* 07h */
U32 MsgContext; /* 08h */
U16 Reserved4; /* 0Ch */
/*
- * Copyright (c) 2000-2004 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_targ.h
/*
- * Copyright (c) 2001-2005 LSI Corporation.
+ * Copyright (c) 2001-2008 LSI Corporation.
*
*
* Name: mpi_tool.h
/*
- * Copyright (c) 2000-2004 LSI Corporation.
+ * Copyright (c) 2000-2008 LSI Corporation.
*
*
* Name: mpi_type.h
* Title: MPI Basic type definitions
* Creation Date: June 6, 2000
*
- * mpi_type.h Version: 01.05.01
+ * mpi_type.h Version: 01.05.02
*
* Version History
* ---------------
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff