ACPI: pci_root: check _CRS, then _BBN for downstream bus number

To find a host bridge's downstream bus number, we currently look at _BBN
first.  If _BBN returns a bus number we've already seen, we conclude that
_BBN was wrong and look for a bus number in _CRS.

However, the spec[1] (figure 5-5 and the example in sec 9.12.1) and an ACPI
FAQ[2] suggest that the OS should use _CRS to discover the bus number
range, and that _BBN is really intended to bootstrap _CRS methods that
reference PCI opregions.

This patch makes us always look at _CRS first.  If _CRS doesn't supply a
bus number, we look at _BBN.  If _BBN doesn't exist, we default to zero.
This makes the behavior consistent regardless of device discovery order.
Previously, if A and B had duplicate _BBNs and we found A first, we'd only
look at B's _CRS, whereas if we found B first, we'd only look at A's _CRS.

I'm told that Windows discovers host bridge bus numbers using _CRS, so
it should be fairly safe to rely on this BIOS functionality.

This patch also removes two misleading messages: we printed the "Wrong _BBN
value, reboot and use option 'pci=noacpi'" message before looking at _CRS,
so we would likely find the bus number in _CRS, the system would work fine,
and the user would be confused.  The "PCI _CRS %d overrides _BBN 0" message
incorrectly assumes _BBN was zero, and it's useless anyway because we
print the segment/bus number a few lines later.

References:
    [1] http://www.acpi.info/DOWNLOADS/ACPIspec30b.pdf
    [2] http://www.acpi.info/acpi_faq.htm _BBN/_CRS discussion
    http://download.microsoft.com/download/9/8/f/98f3fe47-dfc3-4e74-92a3-088782200fe7/TWAR05005_WinHEC05.ppt (slide 17)
    http://bugzilla.kernel.org/show_bug.cgi?id=1662 ASUS PR-DLS
    http://bugzilla.kernel.org/show_bug.cgi?id=1127 ASUS PR-DLSW
    http://bugzilla.kernel.org/show_bug.cgi?id=1741 ASUS PR-DLS533

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Shaohua Li <shaohua.li@intel.com>
CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Len Brown <len.brown@intel.com>

diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 196f97d..a8b2507 100644 (file)
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -365,12 +365,12 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 {
        int result = 0;
        struct acpi_pci_root *root = NULL;
-       struct acpi_pci_root *tmp;
        acpi_status status = AE_OK;
        unsigned long long value = 0;
        acpi_handle handle = NULL;
        struct acpi_device *child;
        u32 flags, base_flags;
+       int bus;
 
 
        if (!device)
@@ -420,46 +420,24 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
        /* 
         * Bus
         * ---
-        * Obtained via _BBN, if exists, otherwise assumed to be zero (0).
+        * Check _CRS first, then _BBN.  If no _BBN, default to zero.
         */
-       status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL,
-                                      &value);
-       switch (status) {
-       case AE_OK:
-               root->id.bus = (u16) value;
-               break;
-       case AE_NOT_FOUND:
-               ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Assuming bus 0 (no _BBN)\n"));
-               root->id.bus = 0;
-               break;
-       default:
-               ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BBN"));
-               result = -ENODEV;
-               goto end;
-       }
-
-       /* Some systems have wrong _BBN */
-       list_for_each_entry(tmp, &acpi_pci_roots, node) {
-               if ((tmp->id.segment == root->id.segment)
-                   && (tmp->id.bus == root->id.bus)) {
-                       int bus = 0;
-                       acpi_status status;
-
-                       printk(KERN_ERR PREFIX
-                                   "Wrong _BBN value, reboot"
-                                   " and use option 'pci=noacpi'\n");
-
-                       status = try_get_root_bridge_busnr(device->handle, &bus);
-                       if (ACPI_FAILURE(status))
-                               break;
-                       if (bus != root->id.bus) {
-                               printk(KERN_INFO PREFIX
-                                      "PCI _CRS %d overrides _BBN 0\n", bus);
-                               root->id.bus = bus;
-                       }
-                       break;
+       status = try_get_root_bridge_busnr(device->handle, &bus);
+       if (ACPI_SUCCESS(status))
+               root->id.bus = bus;
+       else {
+               status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,                                               NULL, &value);
+               if (ACPI_SUCCESS(status))
+                       root->id.bus = (u16) value;
+               else if (status == AE_NOT_FOUND)
+                       root->id.bus = 0;
+               else {
+                       ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BBN"));
+                       result = -ENODEV;
+                       goto end;
                }
        }
+
        /*
         * Device & Function
         * -----------------