i2c-mpc: add support for the MPC512x processors from Freescale

As I2C interrupts must  be enabled for the MPC512x by the setup function
as well, "fsl,preserve-clocking" is handled in a slighly different way.
Also, the old settings are now reported calling dev_dbg(). For the
MPC512x the clock setup function of the MPC52xx can be re-used.
Furthermore, the Kconfig help has been updated and corrected.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 1004181..ecf079b 100644 (file)
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -419,13 +419,12 @@ config I2C_IXP2000
          instead.
 
 config I2C_MPC
-       tristate "MPC107/824x/85xx/52xx/86xx"
+       tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
        depends on PPC32
        help
          If you say yes to this option, support will be included for the
-         built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
-         MPC85xx/MPC8641 family processors. The driver may also work on 52xx
-         family processors, though interrupts are known not to work.
+         built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
+         MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
 
          This driver can also be built as a module.  If so, the module
          will be called i2c-mpc.

diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 370c342..78a15af 100644 (file)
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -31,6 +31,9 @@
 
 #define DRV_NAME "mpc-i2c"
 
+#define MPC_I2C_CLOCK_LEGACY   0
+#define MPC_I2C_CLOCK_PRESERVE (~0U)
+
 #define MPC_I2C_FDR   0x04
 #define MPC_I2C_CR    0x08
 #define MPC_I2C_SR    0x0c
@@ -163,7 +166,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
        return 0;
 }
 
-#ifdef CONFIG_PPC_MPC52xx
+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
 static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = {
        {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
        {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
@@ -193,7 +196,7 @@ static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
        u32 divider;
        int i;
 
-       if (!clock)
+       if (clock == MPC_I2C_CLOCK_LEGACY)
                return -EINVAL;
 
        /* Determine divider value */
@@ -221,6 +224,12 @@ static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
 {
        int ret, fdr;
 
+       if (clock == MPC_I2C_CLOCK_PRESERVE) {
+               dev_dbg(i2c->dev, "using fdr %d\n",
+                       readb(i2c->base + MPC_I2C_FDR));
+               return;
+       }
+
        ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
        fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
 
@@ -229,13 +238,49 @@ static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
        if (ret >= 0)
                dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
 }
-#else /* !CONFIG_PPC_MPC52xx */
+#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
 static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
                                         struct mpc_i2c *i2c,
                                         u32 clock, u32 prescaler)
 {
 }
-#endif /* CONFIG_PPC_MPC52xx*/
+#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
+
+#ifdef CONFIG_PPC_MPC512x
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+                                        struct mpc_i2c *i2c,
+                                        u32 clock, u32 prescaler)
+{
+       struct device_node *node_ctrl;
+       void __iomem *ctrl;
+       const u32 *pval;
+       u32 idx;
+
+       /* Enable I2C interrupts for mpc5121 */
+       node_ctrl = of_find_compatible_node(NULL, NULL,
+                                           "fsl,mpc5121-i2c-ctrl");
+       if (node_ctrl) {
+               ctrl = of_iomap(node_ctrl, 0);
+               if (ctrl) {
+                       /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
+                       pval = of_get_property(node, "reg", NULL);
+                       idx = (*pval & 0xff) / 0x20;
+                       setbits32(ctrl, 1 << (24 + idx * 2));
+                       iounmap(ctrl);
+               }
+               of_node_put(node_ctrl);
+       }
+
+       /* The clock setup for the 52xx works also fine for the 512x */
+       mpc_i2c_setup_52xx(node, i2c, clock, prescaler);
+}
+#else /* CONFIG_PPC_MPC512x */
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+                                        struct mpc_i2c *i2c,
+                                        u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_MPC512x */
 
 #ifdef CONFIG_FSL_SOC
 static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] __devinitconst = {
@@ -294,7 +339,7 @@ static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
        u32 divider;
        int i;
 
-       if (!clock)
+       if (clock == MPC_I2C_CLOCK_LEGACY)
                return -EINVAL;
 
        /* Determine proper divider value */
@@ -327,6 +372,13 @@ static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
 {
        int ret, fdr;
 
+       if (clock == MPC_I2C_CLOCK_PRESERVE) {
+               dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
+                       readb(i2c->base + MPC_I2C_DFSRR),
+                       readb(i2c->base + MPC_I2C_FDR));
+               return;
+       }
+
        ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
        fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
 
@@ -495,7 +547,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 {
        struct mpc_i2c *i2c;
        const u32 *prop;
-       u32 clock = 0;
+       u32 clock = MPC_I2C_CLOCK_LEGACY;
        int result = 0;
        int plen;
 
@@ -524,20 +576,21 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
                }
        }
 
-       if (!of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+       if (of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+               clock = MPC_I2C_CLOCK_PRESERVE;
+       } else {
                prop = of_get_property(op->node, "clock-frequency", &plen);
                if (prop && plen == sizeof(u32))
                        clock = *prop;
+       }
 
-               if (match->data) {
-                       struct mpc_i2c_data *data =
-                               (struct mpc_i2c_data *)match->data;
-                       data->setup(op->node, i2c, clock, data->prescaler);
-               } else {
-                       /* Backwards compatibility */
-                       if (of_get_property(op->node, "dfsrr", NULL))
-                               mpc_i2c_setup_8xxx(op->node, i2c, clock, 0);
-               }
+       if (match->data) {
+               struct mpc_i2c_data *data = match->data;
+               data->setup(op->node, i2c, clock, data->prescaler);
+       } else {
+               /* Backwards compatibility */
+               if (of_get_property(op->node, "dfsrr", NULL))
+                       mpc_i2c_setup_8xxx(op->node, i2c, clock, 0);
        }
 
        dev_set_drvdata(&op->dev, i2c);
@@ -582,6 +635,10 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
        return 0;
 };
 
+static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = {
+       .setup = mpc_i2c_setup_512x,
+};
+
 static struct mpc_i2c_data mpc_i2c_data_52xx __devinitdata = {
        .setup = mpc_i2c_setup_52xx,
 };
@@ -604,6 +661,7 @@ static const struct of_device_id mpc_i2c_of_match[] = {
        {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
        {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
        {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+       {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
        {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
        {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
        {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
@@ -613,7 +671,6 @@ static const struct of_device_id mpc_i2c_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
 
-
 /* Structure for a device driver */
 static struct of_platform_driver mpc_i2c_driver = {
        .match_table    = mpc_i2c_of_match,
@@ -646,5 +703,5 @@ module_exit(fsl_i2c_exit);
 
 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
-                  "MPC824x/85xx/52xx processors");
+                  "MPC824x/83xx/85xx/86xx/512x/52xx processors");
 MODULE_LICENSE("GPL");