[PATCH] ioc4: CONFIG split

The SGI IOC4 I/O controller chip drivers are currently all configured by
CONFIG_BLK_DEV_SGIIOC4.  This is undesirable as not all IOC4 hardware features
are needed by all systems.

This patch adds two configuration variables, CONFIG_SGI_IOC4 for core IOC4
driver support (see patch 1/3 in this series for further explanation) and
CONFIG_SERIAL_SGI_IOC4 to independently enable serial port support.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Acked-by: Pat Gefre <pfg@sgi.com>
Acked-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 6ff7107..a01bb02 100644 (file)
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -588,6 +588,7 @@ CONFIG_SGI_MBCS=m
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_SGI_L1_CONSOLE=y
+CONFIG_SERIAL_SGI_IOC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -788,6 +789,11 @@ CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
 
 #
+# SN Devices
+#
+CONFIG_SGI_IOC4=y
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y

diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 7539e83..9997ef4 100644 (file)
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -638,6 +638,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_SGI_L1_CONSOLE=y
+CONFIG_SERIAL_SGI_IOC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -943,6 +944,11 @@ CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_DEBUG is not set
 
 #
+# SN Devices
+#
+CONFIG_SGI_IOC4=y
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y

diff --git a/drivers/Kconfig b/drivers/Kconfig
index ed41d90..aed4a9b 100644 (file)
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -58,4 +58,6 @@ source "drivers/mmc/Kconfig"
 
 source "drivers/infiniband/Kconfig"
 
+source "drivers/sn/Kconfig"
+
 endmenu

diff --git a/drivers/Makefile b/drivers/Makefile
index 15681de..3167be5 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -61,6 +61,6 @@ obj-$(CONFIG_EISA)            += eisa/
 obj-$(CONFIG_CPU_FREQ)         += cpufreq/
 obj-$(CONFIG_MMC)              += mmc/
 obj-$(CONFIG_INFINIBAND)       += infiniband/
-obj-$(CONFIG_BLK_DEV_SGIIOC4)  += sn/
+obj-$(CONFIG_SGI_IOC4)         += sn/
 obj-y                          += firmware/
 obj-$(CONFIG_CRYPTO)           += crypto/

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3ac0a53..0273f12 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -672,8 +672,8 @@ config BLK_DEV_SVWKS
          chipsets.
 
 config BLK_DEV_SGIIOC4
-       tristate "Silicon Graphics IOC4 chipset support"
-       depends on IA64_SGI_SN2 || IA64_GENERIC
+       tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
+       depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4
        help
          This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
          chipset, which has one channel and can support two devices.

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 6a15703..25fcef2 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -843,4 +843,13 @@ config SERIAL_JSM
           To compile this driver as a module, choose M here: the
           module will be called jsm.
 
+config SERIAL_SGI_IOC4
+       tristate "SGI IOC4 controller serial support"
+       depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
+       select SERIAL_CORE
+       help
+               If you have an SGI Altix with an IOC4 based Base IO card
+               and wish to use the serial ports on this card, say Y.
+               Otherwise, say N.
+
 endmenu

diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 81b77d7..8f1cdde 100644 (file)
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -51,4 +51,4 @@ obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
 obj-$(CONFIG_SERIAL_JSM) += jsm/
 obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
-obj-$(CONFIG_BLK_DEV_SGIIOC4) += ioc4_serial.o
+obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o

diff --git a/drivers/sn/Kconfig b/drivers/sn/Kconfig
new file mode 100644 (file)
index 0000000..20f7515
--- /dev/null
+++ b/drivers/sn/Kconfig
@@ -0,0 +1,20 @@
+#
+# Miscellaneous SN-specific devices
+#
+
+menu "SN Devices"
+
+config SGI_IOC4
+       tristate "SGI IOC4 Base IO support"
+       depends on IA64_GENERIC || IA64_SGI_SN2
+       default m
+       ---help---
+       This option enables basic support for the SGI IOC4-based Base IO
+       controller card.  This option does not enable any specific
+       functions on such a card, but provides necessary infrastructure
+       for other drivers to utilize.
+
+       If you have an SGI Altix with an IOC4-based
+       I/O controller say Y.  Otherwise say N.
+
+endmenu

diff --git a/drivers/sn/Makefile b/drivers/sn/Makefile
index 631e549..c2a2841 100644 (file)
--- a/drivers/sn/Makefile
+++ b/drivers/sn/Makefile
@@ -3,4 +3,4 @@
 #
 #
 
-obj-$(CONFIG_BLK_DEV_SGIIOC4) += ioc4.o
+obj-$(CONFIG_SGI_IOC4) += ioc4.o