dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n",
law_start, law_size);
- ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+ ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
if (!ops) {
rc = -ENOMEM;
goto err_ops;
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write/Error Management initialization and handling
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
LIST_HEAD(rio_devices);
static LIST_HEAD(rio_switches);
-#define RIO_ENUM_CMPL_MAGIC 0xdeadbeef
-
static void rio_enum_timeout(unsigned long);
+static void rio_init_em(struct rio_dev *rdev);
+
DEFINE_SPINLOCK(rio_global_list_lock);
static int next_destid = 0;
static int next_switchid = 0;
static int next_net = 0;
+static int next_comptag;
static struct timer_list rio_enum_timer =
TIMER_INITIALIZER(rio_enum_timeout, 0, 0);
-1,
};
-static int rio_sport_phys_table[] = {
- RIO_EFB_PAR_EP_FREE_ID,
- RIO_EFB_SER_EP_FREE_ID,
- RIO_EFB_SER_EP_FREC_ID,
- -1,
-};
-
/**
* rio_get_device_id - Get the base/extended device id for a device
* @port: RIO master port
u32 result;
int ret = 0;
- /* Write component tag CSR magic complete value */
- rio_local_write_config_32(port, RIO_COMPONENT_TAG_CSR,
- RIO_ENUM_CMPL_MAGIC);
- list_for_each_entry(rdev, &rio_devices, global_list)
- rio_write_config_32(rdev, RIO_COMPONENT_TAG_CSR,
- RIO_ENUM_CMPL_MAGIC);
+ /* Assign component tag to all devices */
+ next_comptag = 1;
+ rio_local_write_config_32(port, RIO_COMPONENT_TAG_CSR, next_comptag++);
+
+ list_for_each_entry(rdev, &rio_devices, global_list) {
+ /* Mark device as discovered */
+ rio_read_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+ &result);
+ rio_write_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+ result | RIO_PORT_GEN_DISCOVERED);
+
+ rio_write_config_32(rdev, RIO_COMPONENT_TAG_CSR, next_comptag);
+ rdev->comp_tag = next_comptag++;
+ if (next_comptag >= 0x10000) {
+ pr_err("RIO: Component Tag Counter Overflow\n");
+ break;
+ }
+ }
/* Release host device id locks */
rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
}
/**
+ * rio_em_set_ops- Sets Error Managment operations for a particular vendor switch
+ * @rdev: RIO device
+ *
+ * Searches the RIO EM ops table for known switch types. If the vid
+ * and did match a switch table entry, then set the em_init() and
+ * em_handle() ops to the table entry values.
+ */
+static void rio_em_set_ops(struct rio_dev *rdev)
+{
+ struct rio_em_ops *cur = __start_rio_em_ops;
+ struct rio_em_ops *end = __end_rio_em_ops;
+
+ while (cur < end) {
+ if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
+ pr_debug("RIO: adding EM ops for %s\n", rio_name(rdev));
+ rdev->rswitch->em_init = cur->init_hook;
+ rdev->rswitch->em_handle = cur->handler_hook;
+ break;
+ }
+ cur++;
+ }
+}
+
+/**
* rio_add_device- Adds a RIO device to the device model
* @rdev: RIO device
*
rdev->asm_rev = result >> 16;
rio_mport_read_config_32(port, destid, hopcount, RIO_PEF_CAR,
&rdev->pef);
- if (rdev->pef & RIO_PEF_EXT_FEATURES)
+ if (rdev->pef & RIO_PEF_EXT_FEATURES) {
rdev->efptr = result & 0xffff;
+ rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
+ hopcount);
+
+ rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
+ hopcount, RIO_EFB_ERR_MGMNT);
+ }
rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
&rdev->src_ops);
rswitch->switchid = next_switchid;
rswitch->hopcount = hopcount;
rswitch->destid = destid;
+ rswitch->port_ok = 0;
rswitch->route_table = kzalloc(sizeof(u8)*
RIO_MAX_ROUTE_ENTRIES(port->sys_size),
GFP_KERNEL);
dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
rdev->rswitch->switchid);
rio_route_set_ops(rdev);
+ rio_em_set_ops(rdev);
if (do_enum && rdev->rswitch->clr_table)
rdev->rswitch->clr_table(port, destid, hopcount,
*
* Reads the port error status CSR for a particular switch port to
* determine if the port has an active link. Returns
- * %PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
* inactive.
*/
static int
rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
{
- u32 result;
+ u32 result = 0;
u32 ext_ftr_ptr;
- int *entry = rio_sport_phys_table;
-
- do {
- if ((ext_ftr_ptr =
- rio_mport_get_feature(port, 0, destid, hopcount, *entry)))
+ ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0);
+ while (ext_ftr_ptr) {
+ rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr, &result);
+ result = RIO_GET_BLOCK_ID(result);
+ if ((result == RIO_EFB_SER_EP_FREE_ID) ||
+ (result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
+ (result == RIO_EFB_SER_EP_FREC_ID))
break;
- } while (*++entry >= 0);
+
+ ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
+ ext_ftr_ptr);
+ }
if (ext_ftr_ptr)
rio_mport_read_config_32(port, destid, hopcount,
RIO_PORT_N_ERR_STS_CSR(sport),
&result);
- return (result & PORT_N_ERR_STS_PORT_OK);
+ return result & RIO_PORT_N_ERR_STS_PORT_OK;
}
/**
rio_name(rdev), rdev->vid, rdev->did, num_ports);
sw_destid = next_destid;
for (port_num = 0; port_num < num_ports; port_num++) {
- if (sw_inport == port_num)
+ if (sw_inport == port_num) {
+ rdev->rswitch->port_ok |= (1 << port_num);
continue;
+ }
cur_destid = next_destid;
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
+ rdev->rswitch->port_ok |= (1 << port_num);
rio_route_add_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
RIO_ANY_DESTID(port->sys_size),
port_num;
}
}
+ } else {
+ /* If switch supports Error Management,
+ * set PORT_LOCKOUT bit for unused port
+ */
+ if (rdev->em_efptr)
+ rio_set_port_lockout(rdev, port_num, 1);
+
+ rdev->rswitch->port_ok &= ~(1 << port_num);
}
}
+ /* Direct Port-write messages to the enumeratiing host */
+ if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&
+ (rdev->em_efptr)) {
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PW_TGT_DEVID,
+ (port->host_deviceid << 16) |
+ (port->sys_size << 15));
+ }
+
+ rio_init_em(rdev);
+
/* Check for empty switch */
if (next_destid == sw_destid) {
next_destid++;
* rio_enum_complete- Tests if enumeration of a network is complete
* @port: Master port to send transaction
*
- * Tests the Component Tag CSR for presence of the magic enumeration
- * complete flag. Return %1 if enumeration is complete or %0 if
+ * Tests the Component Tag CSR for non-zero value (enumeration
+ * complete flag). Return %1 if enumeration is complete or %0 if
* enumeration is incomplete.
*/
static int rio_enum_complete(struct rio_mport *port)
{
u32 tag_csr;
- int ret = 0;
rio_local_read_config_32(port, RIO_COMPONENT_TAG_CSR, &tag_csr);
-
- if (tag_csr == RIO_ENUM_CMPL_MAGIC)
- ret = 1;
-
- return ret;
+ return (tag_csr & 0xffff) ? 1 : 0;
}
/**
*
* Reads the port error status CSR for the master port to
* determine if the port has an active link. Returns
- * %PORT_N_ERR_STS_PORT_OK if the master port is active
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the master port is active
* or %0 if it is inactive.
*/
static int rio_mport_is_active(struct rio_mport *port)
RIO_PORT_N_ERR_STS_CSR(port->index),
&result);
- return (result & PORT_N_ERR_STS_PORT_OK);
+ return result & RIO_PORT_N_ERR_STS_PORT_OK;
}
/**
}
/**
+ * rio_init_em - Initializes RIO Error Management (for switches)
+ * @port: Master port associated with the RIO network
+ *
+ * For each enumerated switch, call device-specific error management
+ * initialization routine (if supplied by the switch driver).
+ */
+static void rio_init_em(struct rio_dev *rdev)
+{
+ if (rio_is_switch(rdev) && (rdev->em_efptr) &&
+ (rdev->rswitch->em_init)) {
+ rdev->rswitch->em_init(rdev);
+ }
+}
+
+/**
+ * rio_pw_enable - Enables/disables port-write handling by a master port
+ * @port: Master port associated with port-write handling
+ * @enable: 1=enable, 0=disable
+ */
+static void rio_pw_enable(struct rio_mport *port, int enable)
+{
+ if (port->ops->pwenable)
+ port->ops->pwenable(port, enable);
+}
+
+/**
* rio_enum_mport- Start enumeration through a master port
* @mport: Master port to send transactions
*
}
rio_update_route_tables(mport);
rio_clear_locks(mport);
+ rio_pw_enable(mport, 1);
} else {
printk(KERN_INFO "RIO: master port %d link inactive\n",
mport->id);
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <mporter@kernel.crashing.org>
*
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write/Error Management initialization and handling
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
}
/**
+ * rio_request_inb_pwrite - request inbound port-write message service
+ * @mport: RIO device to which register inbound port-write callback routine
+ * @pwcback: Callback routine to execute when port-write is received
+ *
+ * Binds a port-write callback function to the RapidIO device.
+ * Returns 0 if the request has been satisfied.
+ */
+int rio_request_inb_pwrite(struct rio_dev *rdev,
+ int (*pwcback)(struct rio_dev *rdev, union rio_pw_msg *msg, int step))
+{
+ int rc = 0;
+
+ spin_lock(&rio_global_list_lock);
+ if (rdev->pwcback != NULL)
+ rc = -ENOMEM;
+ else
+ rdev->pwcback = pwcback;
+
+ spin_unlock(&rio_global_list_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_request_inb_pwrite);
+
+/**
+ * rio_release_inb_pwrite - release inbound port-write message service
+ * @rdev: RIO device which registered for inbound port-write callback
+ *
+ * Removes callback from the rio_dev structure. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_release_inb_pwrite(struct rio_dev *rdev)
+{
+ int rc = -ENOMEM;
+
+ spin_lock(&rio_global_list_lock);
+ if (rdev->pwcback) {
+ rdev->pwcback = NULL;
+ rc = 0;
+ }
+
+ spin_unlock(&rio_global_list_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_release_inb_pwrite);
+
+/**
+ * rio_mport_get_physefb - Helper function that returns register offset
+ * for Physical Layer Extended Features Block.
+ * @rdev: RIO device
+ */
+u32
+rio_mport_get_physefb(struct rio_mport *port, int local,
+ u16 destid, u8 hopcount)
+{
+ u32 ext_ftr_ptr;
+ u32 ftr_header;
+
+ ext_ftr_ptr = rio_mport_get_efb(port, local, destid, hopcount, 0);
+
+ while (ext_ftr_ptr) {
+ if (local)
+ rio_local_read_config_32(port, ext_ftr_ptr,
+ &ftr_header);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr, &ftr_header);
+
+ ftr_header = RIO_GET_BLOCK_ID(ftr_header);
+ switch (ftr_header) {
+
+ case RIO_EFB_SER_EP_ID_V13P:
+ case RIO_EFB_SER_EP_REC_ID_V13P:
+ case RIO_EFB_SER_EP_FREE_ID_V13P:
+ case RIO_EFB_SER_EP_ID:
+ case RIO_EFB_SER_EP_REC_ID:
+ case RIO_EFB_SER_EP_FREE_ID:
+ case RIO_EFB_SER_EP_FREC_ID:
+
+ return ext_ftr_ptr;
+
+ default:
+ break;
+ }
+
+ ext_ftr_ptr = rio_mport_get_efb(port, local, destid,
+ hopcount, ext_ftr_ptr);
+ }
+
+ return ext_ftr_ptr;
+}
+
+/**
+ * rio_get_comptag - Begin or continue searching for a RIO device by component tag
+ * @comp_tag: RIO component tad to match
+ * @from: Previous RIO device found in search, or %NULL for new search
+ *
+ * Iterates through the list of known RIO devices. If a RIO device is
+ * found with a matching @comp_tag, a pointer to its device
+ * structure is returned. Otherwise, %NULL is returned. A new search
+ * is initiated by passing %NULL to the @from argument. Otherwise, if
+ * @from is not %NULL, searches continue from next device on the global
+ * list.
+ */
+static struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from)
+{
+ struct list_head *n;
+ struct rio_dev *rdev;
+
+ WARN_ON(in_interrupt());
+ spin_lock(&rio_global_list_lock);
+ n = from ? from->global_list.next : rio_devices.next;
+
+ while (n && (n != &rio_devices)) {
+ rdev = rio_dev_g(n);
+ if (rdev->comp_tag == comp_tag)
+ goto exit;
+ n = n->next;
+ }
+ rdev = NULL;
+exit:
+ spin_unlock(&rio_global_list_lock);
+ return rdev;
+}
+
+/**
+ * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
+ * @rdev: Pointer to RIO device control structure
+ * @pnum: Switch port number to set LOCKOUT bit
+ * @lock: Operation : set (=1) or clear (=0)
+ */
+int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
+{
+ u8 hopcount = 0xff;
+ u16 destid = rdev->destid;
+ u32 regval;
+
+ if (rdev->rswitch) {
+ destid = rdev->rswitch->destid;
+ hopcount = rdev->rswitch->hopcount;
+ }
+
+ rio_mport_read_config_32(rdev->net->hport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
+ ®val);
+ if (lock)
+ regval |= RIO_PORT_N_CTL_LOCKOUT;
+ else
+ regval &= ~RIO_PORT_N_CTL_LOCKOUT;
+
+ rio_mport_write_config_32(rdev->net->hport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
+ regval);
+ return 0;
+}
+
+/**
+ * rio_inb_pwrite_handler - process inbound port-write message
+ * @pw_msg: pointer to inbound port-write message
+ *
+ * Processes an inbound port-write message. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg)
+{
+ struct rio_dev *rdev;
+ struct rio_mport *mport;
+ u8 hopcount;
+ u16 destid;
+ u32 err_status;
+ int rc, portnum;
+
+ rdev = rio_get_comptag(pw_msg->em.comptag, NULL);
+ if (rdev == NULL) {
+ /* Someting bad here (probably enumeration error) */
+ pr_err("RIO: %s No matching device for CTag 0x%08x\n",
+ __func__, pw_msg->em.comptag);
+ return -EIO;
+ }
+
+ pr_debug("RIO: Port-Write message from %s\n", rio_name(rdev));
+
+#ifdef DEBUG_PW
+ {
+ u32 i;
+ for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32);) {
+ pr_debug("0x%02x: %08x %08x %08x %08x",
+ i*4, pw_msg->raw[i], pw_msg->raw[i + 1],
+ pw_msg->raw[i + 2], pw_msg->raw[i + 3]);
+ i += 4;
+ }
+ pr_debug("\n");
+ }
+#endif
+
+ /* Call an external service function (if such is registered
+ * for this device). This may be the service for endpoints that send
+ * device-specific port-write messages. End-point messages expected
+ * to be handled completely by EP specific device driver.
+ * For switches rc==0 signals that no standard processing required.
+ */
+ if (rdev->pwcback != NULL) {
+ rc = rdev->pwcback(rdev, pw_msg, 0);
+ if (rc == 0)
+ return 0;
+ }
+
+ /* For End-point devices processing stops here */
+ if (!(rdev->pef & RIO_PEF_SWITCH))
+ return 0;
+
+ if (rdev->phys_efptr == 0) {
+ pr_err("RIO_PW: Bad switch initialization for %s\n",
+ rio_name(rdev));
+ return 0;
+ }
+
+ mport = rdev->net->hport;
+ destid = rdev->rswitch->destid;
+ hopcount = rdev->rswitch->hopcount;
+
+ /*
+ * Process the port-write notification from switch
+ */
+
+ portnum = pw_msg->em.is_port & 0xFF;
+
+ if (rdev->rswitch->em_handle)
+ rdev->rswitch->em_handle(rdev, portnum);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ &err_status);
+ pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);
+
+ if (pw_msg->em.errdetect) {
+ pr_debug("RIO_PW: RIO_EM_P%d_ERR_DETECT=0x%08x\n",
+ portnum, pw_msg->em.errdetect);
+ /* Clear EM Port N Error Detect CSR */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), 0);
+ }
+
+ if (pw_msg->em.ltlerrdet) {
+ pr_debug("RIO_PW: RIO_EM_LTL_ERR_DETECT=0x%08x\n",
+ pw_msg->em.ltlerrdet);
+ /* Clear EM L/T Layer Error Detect CSR */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, 0);
+ }
+
+ /* Clear Port Errors */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ err_status & RIO_PORT_N_ERR_STS_CLR_MASK);
+
+ if (rdev->rswitch->port_ok & (1 << portnum)) {
+ if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT) {
+ rdev->rswitch->port_ok &= ~(1 << portnum);
+ rio_set_port_lockout(rdev, portnum, 1);
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr +
+ RIO_PORT_N_ACK_STS_CSR(portnum),
+ RIO_PORT_N_ACK_CLEAR);
+
+ /* Schedule Extraction Service */
+ pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
+ rio_name(rdev), portnum);
+ }
+ } else {
+ if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
+ rdev->rswitch->port_ok |= (1 << portnum);
+ rio_set_port_lockout(rdev, portnum, 0);
+
+ /* Schedule Insertion Service */
+ pr_debug("RIO_PW: Device Insertion on [%s]-P%d\n",
+ rio_name(rdev), portnum);
+ }
+ }
+
+ /* Clear Port-Write Pending bit */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ RIO_PORT_N_ERR_STS_PW_PEND);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_inb_pwrite_handler);
+
+/**
+ * rio_mport_get_efb - get pointer to next extended features block
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @from: Offset of current Extended Feature block header (if 0 starts
+ * from ExtFeaturePtr)
+ */
+u32
+rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+ u8 hopcount, u32 from)
+{
+ u32 reg_val;
+
+ if (from == 0) {
+ if (local)
+ rio_local_read_config_32(port, RIO_ASM_INFO_CAR,
+ ®_val);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_ASM_INFO_CAR, ®_val);
+ return reg_val & RIO_EXT_FTR_PTR_MASK;
+ } else {
+ if (local)
+ rio_local_read_config_32(port, from, ®_val);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ from, ®_val);
+ return RIO_GET_BLOCK_ID(reg_val);
+ }
+}
+
+/**
* rio_mport_get_feature - query for devices' extended features
* @port: Master port to issue transaction
* @local: Indicate a local master port or remote device access
RIO_STD_RTE_CONF_PORT_SEL_CSR,
(u32)route_port);
}
+
udelay(10);
return 0;
}
extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid,
u8 hopcount, int ftr);
+extern u32 rio_mport_get_physefb(struct rio_mport *port, int local,
+ u16 destid, u8 hopcount);
+extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+ u8 hopcount, u32 from);
extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
extern int rio_enum_mport(struct rio_mport *mport);
extern int rio_disc_mport(struct rio_mport *mport);
u8 *route_port);
extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid,
u8 hopcount, u16 table);
+extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
/* Structures internal to the RIO core code */
extern struct device_attribute rio_dev_attrs[];
#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
+
+/*
+ * RapidIO Error Management
+ */
+extern struct rio_em_ops __start_rio_em_ops[];
+extern struct rio_em_ops __end_rio_em_ops[];
+
+/* Helpers internal to the RIO core code */
+#define DECLARE_RIO_EM_SECTION(section, name, vid, did, init_hook, em_hook) \
+ static const struct rio_em_ops __rio_em_##name __used \
+ __section(section) = { vid, did, init_hook, em_hook };
+
+/**
+ * DECLARE_RIO_EM_OPS - Registers switch EM operations
+ * @vid: RIO vendor ID
+ * @did: RIO device ID
+ * @init_hook: Callback that initializes device specific EM
+ * @em_hook: Callback that handles device specific EM
+ *
+ * A &struct rio_em_ops is initialized with the ops and placed into a
+ * RIO-specific kernel section.
+ */
+#define DECLARE_RIO_EM_OPS(vid, did, init_hook, em_hook) \
+ DECLARE_RIO_EM_SECTION(.rio_em_ops, vid##did, \
+ vid, did, init_hook, em_hook)
#define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n)
#define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n)
+#define TSI568_SP_MODE_BC 0x10004
+#define TSI568_SP_MODE_PW_DIS 0x08000000
+
static int
tsi568_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port)
}
DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_route_add_entry, tsi568_route_get_entry, tsi568_route_clr_table);
+
+static int
+tsi568_em_init(struct rio_dev *rdev)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ u32 regval;
+
+ pr_debug("TSI568 %s [%d:%d]\n", __func__, destid, hopcount);
+
+ /* Make sure that Port-Writes are disabled (for all ports) */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI568_SP_MODE_BC, ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI568_SP_MODE_BC, regval | TSI568_SP_MODE_PW_DIS);
+
+ return 0;
+}
+
+DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_em_init, NULL);
#define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n)
#define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n)
+#define TSI578_SP_MODE(n) (0x11004 + n*0x100)
+#define TSI578_SP_MODE_PW_DIS 0x08000000
+
+#define TSI578_SP_CTL_INDEP(n) (0x13004 + n*0x100)
+#define TSI578_SP_LUT_PEINF(n) (0x13010 + n*0x100)
+#define TSI578_SP_CS_TX(n) (0x13014 + n*0x100)
+#define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100)
+
static int
tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port)
DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
+
+static int
+tsi57x_em_init(struct rio_dev *rdev)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ u32 regval;
+ int portnum;
+
+ pr_debug("TSI578 %s [%d:%d]\n", __func__, destid, hopcount);
+
+ for (portnum = 0; portnum < 16; portnum++) {
+ /* Make sure that Port-Writes are enabled (for all ports) */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_MODE(portnum), ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_MODE(portnum),
+ regval & ~TSI578_SP_MODE_PW_DIS);
+
+ /* Clear all pending interrupts */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr +
+ RIO_PORT_N_ERR_STS_CSR(portnum),
+ ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr +
+ RIO_PORT_N_ERR_STS_CSR(portnum),
+ regval & 0x07120214);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_INT_STATUS(portnum), ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_INT_STATUS(portnum),
+ regval & 0x000700bd);
+
+ /* Enable all interrupts to allow ports to send a port-write */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_CTL_INDEP(portnum), ®val);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_CTL_INDEP(portnum),
+ regval | 0x000b0000);
+
+ /* Skip next (odd) port if the current port is in x4 mode */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ ®val);
+ if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
+ portnum++;
+ }
+
+ return 0;
+}
+
+static int
+tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+ struct rio_mport *mport = rdev->net->hport;
+ u16 destid = rdev->rswitch->destid;
+ u8 hopcount = rdev->rswitch->hopcount;
+ u32 intstat, err_status;
+ int sendcount, checkcount;
+ u8 route_port;
+ u32 regval;
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ &err_status);
+
+ if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) &&
+ (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
+ RIO_PORT_N_ERR_STS_PW_INP_ES))) {
+ /* Remove any queued packets by locking/unlocking port */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ ®val);
+ if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ regval | RIO_PORT_N_CTL_LOCKOUT);
+ udelay(50);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ regval);
+ }
+
+ /* Read from link maintenance response register to clear
+ * valid bit
+ */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum),
+ ®val);
+
+ /* Send a Packet-Not-Accepted/Link-Request-Input-Status control
+ * symbol to recover from IES/OES
+ */
+ sendcount = 3;
+ while (sendcount) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_CS_TX(portnum), 0x40fc8000);
+ checkcount = 3;
+ while (checkcount--) {
+ udelay(50);
+ rio_mport_read_config_32(
+ mport, destid, hopcount,
+ rdev->phys_efptr +
+ RIO_PORT_N_MNT_RSP_CSR(portnum),
+ ®val);
+ if (regval & RIO_PORT_N_MNT_RSP_RVAL)
+ goto exit_es;
+ }
+
+ sendcount--;
+ }
+ }
+
+exit_es:
+ /* Clear implementation specific error status bits */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_INT_STATUS(portnum), &intstat);
+ pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n",
+ destid, hopcount, portnum, intstat);
+
+ if (intstat & 0x10000) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ TSI578_SP_LUT_PEINF(portnum), ®val);
+ regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24);
+ route_port = rdev->rswitch->route_table[regval];
+ pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n",
+ rio_name(rdev), portnum, regval);
+ tsi57x_route_add_entry(mport, destid, hopcount,
+ RIO_GLOBAL_TABLE, regval, route_port);
+ }
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ TSI578_SP_INT_STATUS(portnum),
+ intstat & 0x000700bd);
+
+ return 0;
+}
+
+DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_em_init, tsi57x_em_handler);
+DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_em_init, tsi57x_em_handler);
+DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_em_init, tsi57x_em_handler);
+DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_em_init, tsi57x_em_handler);
} \
\
/* RapidIO route ops */ \
- .rio_route : AT(ADDR(.rio_route) - LOAD_OFFSET) { \
+ .rio_ops : AT(ADDR(.rio_ops) - LOAD_OFFSET) { \
VMLINUX_SYMBOL(__start_rio_route_ops) = .; \
*(.rio_route_ops) \
VMLINUX_SYMBOL(__end_rio_route_ops) = .; \
+ VMLINUX_SYMBOL(__start_rio_em_ops) = .; \
+ *(.rio_em_ops) \
+ VMLINUX_SYMBOL(__end_rio_em_ops) = .; \
} \
\
TRACEDATA \
#define RIO_INB_MBOX_RESOURCE 1
#define RIO_OUTB_MBOX_RESOURCE 2
+#define RIO_PW_MSG_SIZE 64
+
extern struct bus_type rio_bus_type;
extern struct list_head rio_devices; /* list of all devices */
struct rio_mport;
+union rio_pw_msg;
/**
* struct rio_dev - RIO device info
u32 swpinfo; /* Only used for switches */
u32 src_ops;
u32 dst_ops;
+ u32 comp_tag;
+ u32 phys_efptr;
+ u32 em_efptr;
u64 dma_mask;
struct rio_switch *rswitch; /* RIO switch info */
struct rio_driver *driver; /* RIO driver claiming this device */
struct device dev; /* LDM device structure */
struct resource riores[RIO_MAX_DEV_RESOURCES];
+ int (*pwcback) (struct rio_dev *rdev, union rio_pw_msg *msg, int step);
u16 destid;
};
* @hopcount: Hopcount to this switch
* @destid: Associated destid in the path
* @route_table: Copy of switch routing table
+ * @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0
* @add_entry: Callback for switch-specific route add function
* @get_entry: Callback for switch-specific route get function
* @clr_table: Callback for switch-specific clear route table function
+ * @em_init: Callback for switch-specific error management initialization function
+ * @em_handle: Callback for switch-specific error management handler function
*/
struct rio_switch {
struct list_head node;
u16 hopcount;
u16 destid;
u8 *route_table;
+ u32 port_ok;
int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port);
int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 * route_port);
int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount,
u16 table);
+ int (*em_init) (struct rio_dev *dev);
+ int (*em_handle) (struct rio_dev *dev, u8 swport);
};
/* Low-level architecture-dependent routines */
* @cread: Callback to perform network read of config space.
* @cwrite: Callback to perform network write of config space.
* @dsend: Callback to send a doorbell message.
+ * @pwenable: Callback to enable/disable port-write message handling.
*/
struct rio_ops {
int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len,
int (*cwrite) (struct rio_mport *mport, int index, u16 destid,
u8 hopcount, u32 offset, int len, u32 data);
int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data);
+ int (*pwenable) (struct rio_mport *mport, int enable);
};
#define RIO_RESOURCE_MEM 0x00000100
u16 table);
};
+/**
+ * struct rio_em_ops - Per-switch error management operations
+ * @vid: RIO vendor ID
+ * @did: RIO device ID
+ * @init_hook: Switch specific error management initialization (may be NULL)
+ * @handler_hook: Switch specific error management handler (may be NULL)
+ *
+ * Defines the operations that are necessary to initialize and handle
+ * error management events for a particular RIO switch device.
+ */
+struct rio_em_ops {
+ u16 vid, did;
+ int (*init_hook) (struct rio_dev *dev);
+ int (*handler_hook) (struct rio_dev *dev, u8 swport);
+};
+
+union rio_pw_msg {
+ struct {
+ u32 comptag; /* Component Tag CSR */
+ u32 errdetect; /* Port N Error Detect CSR */
+ u32 is_port; /* Implementation specific + PortID */
+ u32 ltlerrdet; /* LTL Error Detect CSR */
+ u32 padding[12];
+ } em;
+ u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)];
+};
+
/* Architecture and hardware-specific functions */
extern int rio_init_mports(void);
extern void rio_register_mport(struct rio_mport *);
int rio_request_region(struct rio_dev *, int, char *);
void rio_release_region(struct rio_dev *, int);
+/* Port-Write management */
+extern int rio_request_inb_pwrite(struct rio_dev *,
+ int (*)(struct rio_dev *, union rio_pw_msg*, int));
+extern int rio_release_inb_pwrite(struct rio_dev *);
+extern int rio_inb_pwrite_handler(union rio_pw_msg *pw_msg);
+
/* LDM support */
int rio_register_driver(struct rio_driver *);
void rio_unregister_driver(struct rio_driver *);
#define RIO_EFB_PAR_EP_ID 0x0001 /* [IV] LP/LVDS EP Devices */
#define RIO_EFB_PAR_EP_REC_ID 0x0002 /* [IV] LP/LVDS EP Recovery Devices */
#define RIO_EFB_PAR_EP_FREE_ID 0x0003 /* [IV] LP/LVDS EP Free Devices */
+#define RIO_EFB_SER_EP_ID_V13P 0x0001 /* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */
+#define RIO_EFB_SER_EP_REC_ID_V13P 0x0002 /* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */
+#define RIO_EFB_SER_EP_FREE_ID_V13P 0x0003 /* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */
#define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP/Serial EP Devices */
#define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP/Serial EP Recovery Devices */
#define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP/Serial EP Free Devices */
#define RIO_EFB_SER_EP_FREC_ID 0x0009 /* [VI] LP/Serial EP Free Recovery Devices */
+#define RIO_EFB_ERR_MGMNT 0x0007 /* [VIII] Error Management Extensions */
/*
* Physical 8/16 LP-LVDS
#define RIO_PORT_MNT_HEADER 0x0000
#define RIO_PORT_REQ_CTL_CSR 0x0020
#define RIO_PORT_RSP_CTL_CSR 0x0024 /* 0x0001/0x0002 */
+#define RIO_PORT_LINKTO_CTL_CSR 0x0020 /* Serial */
+#define RIO_PORT_RSPTO_CTL_CSR 0x0024 /* Serial */
#define RIO_PORT_GEN_CTL_CSR 0x003c
#define RIO_PORT_GEN_HOST 0x80000000
#define RIO_PORT_GEN_MASTER 0x40000000
#define RIO_PORT_GEN_DISCOVERED 0x20000000
#define RIO_PORT_N_MNT_REQ_CSR(x) (0x0040 + x*0x20) /* 0x0002 */
#define RIO_PORT_N_MNT_RSP_CSR(x) (0x0044 + x*0x20) /* 0x0002 */
+#define RIO_PORT_N_MNT_RSP_RVAL 0x80000000 /* Response Valid */
+#define RIO_PORT_N_MNT_RSP_ASTAT 0x000003e0 /* ackID Status */
+#define RIO_PORT_N_MNT_RSP_LSTAT 0x0000001f /* Link Status */
#define RIO_PORT_N_ACK_STS_CSR(x) (0x0048 + x*0x20) /* 0x0002 */
-#define RIO_PORT_N_ERR_STS_CSR(x) (0x58 + x*0x20)
-#define PORT_N_ERR_STS_PORT_OK 0x00000002
-#define RIO_PORT_N_CTL_CSR(x) (0x5c + x*0x20)
+#define RIO_PORT_N_ACK_CLEAR 0x80000000
+#define RIO_PORT_N_ACK_INBOUND 0x1f000000
+#define RIO_PORT_N_ACK_OUTSTAND 0x00001f00
+#define RIO_PORT_N_ACK_OUTBOUND 0x0000001f
+#define RIO_PORT_N_ERR_STS_CSR(x) (0x0058 + x*0x20)
+#define RIO_PORT_N_ERR_STS_PW_OUT_ES 0x00010000 /* Output Error-stopped */
+#define RIO_PORT_N_ERR_STS_PW_INP_ES 0x00000100 /* Input Error-stopped */
+#define RIO_PORT_N_ERR_STS_PW_PEND 0x00000010 /* Port-Write Pending */
+#define RIO_PORT_N_ERR_STS_PORT_ERR 0x00000004
+#define RIO_PORT_N_ERR_STS_PORT_OK 0x00000002
+#define RIO_PORT_N_ERR_STS_PORT_UNINIT 0x00000001
+#define RIO_PORT_N_ERR_STS_CLR_MASK 0x07120204
+#define RIO_PORT_N_CTL_CSR(x) (0x005c + x*0x20)
+#define RIO_PORT_N_CTL_PWIDTH 0xc0000000
+#define RIO_PORT_N_CTL_PWIDTH_1 0x00000000
+#define RIO_PORT_N_CTL_PWIDTH_4 0x40000000
+#define RIO_PORT_N_CTL_LOCKOUT 0x00000002
+
+/*
+ * Error Management Extensions (RapidIO 1.3+, Part 8)
+ *
+ * Extended Features Block ID=0x0007
+ */
+
+/* General EM Registers (Common for all Ports) */
+
+#define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */
+#define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */
+#define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */
+#define RIO_EM_LTL_HIADDR_CAP 0x010 /* Logical/Transport Layer High Address Capture CSR */
+#define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */
+#define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */
+#define RIO_EM_LTL_CTRL_CAP 0x01c /* Logical/Transport Layer Control Capture CSR */
+#define RIO_EM_PW_TGT_DEVID 0x028 /* Port-write Target deviceID CSR */
+#define RIO_EM_PKT_TTL 0x02c /* Packet Time-to-live CSR */
+
+/* Per-Port EM Registers */
+
+#define RIO_EM_PN_ERR_DETECT(x) (0x040 + x*0x40) /* Port N Error Detect CSR */
+#define REM_PED_IMPL_SPEC 0x80000000
+#define REM_PED_LINK_TO 0x00000001
+#define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */
+#define RIO_EM_PN_ATTRIB_CAP(x) (0x048 + x*0x40) /* Port N Attributes Capture CSR */
+#define RIO_EM_PN_PKT_CAP_0(x) (0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */
+#define RIO_EM_PN_PKT_CAP_1(x) (0x050 + x*0x40) /* Port N Packet Capture 1 CSR */
+#define RIO_EM_PN_PKT_CAP_2(x) (0x054 + x*0x40) /* Port N Packet Capture 2 CSR */
+#define RIO_EM_PN_PKT_CAP_3(x) (0x058 + x*0x40) /* Port N Packet Capture 3 CSR */
+#define RIO_EM_PN_ERRRATE(x) (0x068 + x*0x40) /* Port N Error Rate CSR */
+#define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */
#endif /* LINUX_RIO_REGS_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff