static const u8 zeromac[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
static const u8 bcastmac[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+
+
+
+/*********************************************************************/
+/* */
+/* Misc helper functions */
+/* */
+/*********************************************************************/
+
static inline void clear_bss_descriptor (struct bss_descriptor * bss)
{
/* Don't blow away ->list, just BSS data */
{
int matched = 0;
- lbs_deb_enter(LBS_DEB_ASSOC);
+ lbs_deb_enter(LBS_DEB_SCAN);
if (bss->mode != mode)
goto done;
(bss->capability & WLAN_CAPABILITY_PRIVACY));
done:
- lbs_deb_leave(LBS_DEB_SCAN);
+ lbs_deb_leave_args(LBS_DEB_SCAN, "matched: %d", matched);
return matched;
}
/**
+ * @brief Compare two SSIDs
+ *
+ * @param ssid1 A pointer to ssid to compare
+ * @param ssid2 A pointer to ssid to compare
+ *
+ * @return 0--ssid is same, otherwise is different
+ */
+int libertas_ssid_cmp(u8 *ssid1, u8 ssid1_len, u8 *ssid2, u8 ssid2_len)
+{
+ if (ssid1_len != ssid2_len)
+ return -1;
+
+ return memcmp(ssid1, ssid2, ssid1_len);
+}
+
+
+
+
+/*********************************************************************/
+/* */
+/* Main scanning support */
+/* */
+/*********************************************************************/
+
+
+/**
* @brief Create a channel list for the driver to scan based on region info
*
+ * Only used from wlan_scan_setup_scan_config()
+ *
* Use the driver region/band information to construct a comprehensive list
* of channels to scan. This routine is used for any scan that is not
* provided a specific channel list to scan.
int nextchan;
u8 scantype;
+ lbs_deb_enter_args(LBS_DEB_SCAN, "filteredscan %d", filteredscan);
+
chanidx = 0;
/* Set the default scan type to the user specified type, will later
int channel;
int radiotype;
+ lbs_deb_enter(LBS_DEB_SCAN);
+
pscancfgout = kzalloc(MAX_SCAN_CFG_ALLOC, GFP_KERNEL);
if (pscancfgout == NULL)
goto out;
if (!puserscanin || !puserscanin->chanlist[0].channumber) {
/* Create a default channel scan list */
- lbs_deb_scan("Scan: Creating full region channel list\n");
+ lbs_deb_scan("creating full region channel list\n");
wlan_scan_create_channel_list(priv, pscanchanlist,
*pfilteredscan);
goto out;
}
- lbs_deb_scan("Scan: Using supplied channel list\n");
for (chanidx = 0;
chanidx < WLAN_IOCTL_USER_SCAN_CHAN_MAX
&& puserscanin->chanlist[chanidx].channumber; chanidx++) {
(puserscanin->chanlist[0].channumber ==
priv->adapter->curbssparams.channel)) {
*pscancurrentonly = 1;
- lbs_deb_scan("Scan: Scanning current channel only");
+ lbs_deb_scan("scanning current channel only");
}
out:
/**
* @brief Construct and send multiple scan config commands to the firmware
*
+ * Only used from wlan_scan_networks()
+ *
* Previous routines have created a wlan_scan_cmd_config with any requested
* TLVs. This function splits the channel TLV into maxchanperscan lists
* and sends the portion of the channel TLV along with the other TLVs
int scanned = 0;
union iwreq_data wrqu;
- lbs_deb_enter(LBS_DEB_ASSOC);
+ lbs_deb_enter_args(LBS_DEB_SCAN, "maxchanperscan %d, filteredscan %d, "
+ "full_scan %d", maxchanperscan, filteredscan, full_scan);
if (!pscancfgout || !pchantlvout || !pscanchanlist) {
- lbs_deb_scan("Scan: Null detect: %p, %p, %p\n",
- pscancfgout, pchantlvout, pscanchanlist);
- return -1;
+ lbs_deb_scan("pscancfgout, pchantlvout or "
+ "pscanchanlist is NULL\n");
+ ret = -1;
+ goto out;
}
pchantlvout->header.type = cpu_to_le16(TLV_TYPE_CHANLIST);
while (tlvidx < maxchanperscan && ptmpchan->channumber
&& !doneearly && scanned < 2) {
- lbs_deb_scan("Scan: Chan(%3d), Radio(%d), mode(%d,%d), "
- "Dur(%d)\n",
- ptmpchan->channumber, ptmpchan->radiotype,
+ lbs_deb_scan("channel %d, radio %d, passive %d, "
+ "dischanflt %d, maxscantime %d\n",
+ ptmpchan->channumber,
+ ptmpchan->radiotype,
ptmpchan->chanscanmode.passivescan,
ptmpchan->chanscanmode.disablechanfilt,
ptmpchan->maxscantime);
wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
}
+out:
lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
return ret;
}
-static void
-clear_selected_scan_list_entries(wlan_adapter * adapter,
- const struct wlan_ioctl_user_scan_cfg * scan_cfg)
+/*
+ * Only used from wlan_scan_networks()
+*/
+static void clear_selected_scan_list_entries(wlan_adapter *adapter,
+ const struct wlan_ioctl_user_scan_cfg *scan_cfg)
{
- struct bss_descriptor * bss;
- struct bss_descriptor * safe;
+ struct bss_descriptor *bss;
+ struct bss_descriptor *safe;
u32 clear_ssid_flag = 0, clear_bssid_flag = 0;
+ lbs_deb_enter(LBS_DEB_SCAN);
+
if (!scan_cfg)
- return;
+ goto out;
if (scan_cfg->clear_ssid && scan_cfg->ssid_len)
clear_ssid_flag = 1;
}
if (!clear_ssid_flag && !clear_bssid_flag)
- return;
+ goto out;
mutex_lock(&adapter->lock);
list_for_each_entry_safe (bss, safe, &adapter->network_list, list) {
}
}
mutex_unlock(&adapter->lock);
+out:
+ lbs_deb_leave(LBS_DEB_SCAN);
}
/**
* @brief Internal function used to start a scan based on an input config
*
+ * Also used from debugfs
+ *
* Use the input user scan configuration information when provided in
* order to send the appropriate scan commands to firmware to populate or
* update the internal driver scan table
* @param priv A pointer to wlan_private structure
* @param puserscanin Pointer to the input configuration for the requested
* scan.
+ * @param full_scan ???
*
* @return 0 or < 0 if error
*/
DECLARE_MAC_BUF(mac);
#endif
- lbs_deb_enter(LBS_DEB_SCAN);
+ lbs_deb_enter_args(LBS_DEB_SCAN, "full_scan %d", full_scan);
/* Cancel any partial outstanding partial scans if this scan
* is a full scan.
#ifdef CONFIG_LIBERTAS_DEBUG
/* Dump the scan table */
mutex_lock(&adapter->lock);
+ lbs_deb_scan("The scan table contains:\n");
list_for_each_entry (iter_bss, &adapter->network_list, list) {
- lbs_deb_scan("Scan:(%02d) %s, RSSI[%03d], SSID[%s]\n",
+ lbs_deb_scan("scan %02d, %s, RSSI, %d, SSID '%s'\n",
i++, print_mac(mac, iter_bss->bssid), (s32) iter_bss->rssi,
escape_essid(iter_bss->ssid, iter_bss->ssid_len));
}
u16 beaconsize = 0;
int ret;
- lbs_deb_enter(LBS_DEB_ASSOC);
+ lbs_deb_enter(LBS_DEB_SCAN);
if (*bytesleft >= sizeof(beaconsize)) {
/* Extract & convert beacon size from the command buffer */
if (beaconsize == 0 || beaconsize > *bytesleft) {
*pbeaconinfo += *bytesleft;
*bytesleft = 0;
- return -1;
+ ret = -1;
+ goto done;
}
/* Initialize the current working beacon pointer for this BSS iteration */
if ((end - pos) < 12) {
lbs_deb_scan("process_bss: Not enough bytes left\n");
- return -1;
+ ret = -1;
+ goto done;
}
/*
}
/**
- * @brief Compare two SSIDs
- *
- * @param ssid1 A pointer to ssid to compare
- * @param ssid2 A pointer to ssid to compare
- *
- * @return 0--ssid is same, otherwise is different
- */
-int libertas_ssid_cmp(u8 *ssid1, u8 ssid1_len, u8 *ssid2, u8 ssid2_len)
-{
- if (ssid1_len != ssid2_len)
- return -1;
-
- return memcmp(ssid1, ssid2, ssid1_len);
-}
-
-/**
* @brief This function finds a specific compatible BSSID in the scan list
*
+ * Used in association code
+ *
* @param adapter A pointer to wlan_adapter
* @param bssid BSSID to find in the scan list
* @param mode Network mode: Infrastructure or IBSS
*
* @return index in BSSID list, or error return code (< 0)
*/
-struct bss_descriptor * libertas_find_bssid_in_list(wlan_adapter * adapter,
+struct bss_descriptor *libertas_find_bssid_in_list(wlan_adapter * adapter,
u8 * bssid, u8 mode)
{
struct bss_descriptor * iter_bss;
struct bss_descriptor * found_bss = NULL;
+ lbs_deb_enter(LBS_DEB_SCAN);
+
if (!bssid)
- return NULL;
+ goto out;
lbs_deb_hex(LBS_DEB_SCAN, "looking for",
bssid, ETH_ALEN);
}
mutex_unlock(&adapter->lock);
+out:
+ lbs_deb_leave_args(LBS_DEB_SCAN, "found_bss %p", found_bss);
return found_bss;
}
/**
* @brief This function finds ssid in ssid list.
*
+ * Used in association code
+ *
* @param adapter A pointer to wlan_adapter
* @param ssid SSID to find in the list
* @param bssid BSSID to qualify the SSID selection (if provided)
struct bss_descriptor * found_bss = NULL;
struct bss_descriptor * tmp_oldest = NULL;
+ lbs_deb_enter(LBS_DEB_SCAN);
+
mutex_lock(&adapter->lock);
list_for_each_entry (iter_bss, &adapter->network_list, list) {
out:
mutex_unlock(&adapter->lock);
+ lbs_deb_leave_args(LBS_DEB_SCAN, "found_bss %p", found_bss);
return found_bss;
}
struct bss_descriptor * iter_bss;
struct bss_descriptor * best_bss = NULL;
+ lbs_deb_enter(LBS_DEB_SCAN);
+
mutex_lock(&adapter->lock);
list_for_each_entry (iter_bss, &adapter->network_list, list) {
}
mutex_unlock(&adapter->lock);
+ lbs_deb_leave_args(LBS_DEB_SCAN, "best_bss %p", best_bss);
return best_bss;
}
/**
* @brief Find the AP with specific ssid in the scan list
*
+ * Used from association worker.
+ *
* @param priv A pointer to wlan_private structure
* @param pSSID A pointer to AP's ssid
*
int ret = -1;
struct bss_descriptor * found;
- lbs_deb_enter(LBS_DEB_ASSOC);
+ lbs_deb_enter(LBS_DEB_SCAN);
wlan_scan_networks(priv, NULL, 1);
if (adapter->surpriseremoved)
- return -1;
+ goto out;
wait_event_interruptible(adapter->cmd_pending, !adapter->nr_cmd_pending);
ret = 0;
}
+out:
lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
return ret;
}
return 0;
}
+
/**
* @brief Send a scan command for all available channels filtered on a spec
*
+ * Used in association code and from debugfs
+ *
* @param priv A pointer to wlan_private structure
+ * @param ssid A pointer to the SSID to scan for
+ * @param ssid_len Length of the SSID
+ * @param clear_ssid Should existing scan results with this SSID
+ * be cleared?
* @param prequestedssid A pointer to AP's ssid
* @param keeppreviousscan Flag used to save/clear scan table before scan
*
struct wlan_ioctl_user_scan_cfg scancfg;
int ret = 0;
- lbs_deb_enter(LBS_DEB_ASSOC);
+ lbs_deb_enter_args(LBS_DEB_SCAN, "SSID '%s', clear %d",
+ escape_essid(ssid, ssid_len), clear_ssid);
if (!ssid_len)
goto out;
scancfg.clear_ssid = clear_ssid;
wlan_scan_networks(priv, &scancfg, 1);
- if (adapter->surpriseremoved)
- return -1;
+ if (adapter->surpriseremoved) {
+ ret = -1;
+ goto out;
+ }
wait_event_interruptible(adapter->cmd_pending, !adapter->nr_cmd_pending);
out:
- lbs_deb_leave(LBS_DEB_ASSOC);
+ lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret);
return ret;
}
+
+
+
+/*********************************************************************/
+/* */
+/* Support for Wireless Extensions */
+/* */
+/*********************************************************************/
+
#define MAX_CUSTOM_LEN 64
static inline char *libertas_translate_scan(wlan_private *priv,
#define RSSI_DIFF ((u8)(PERFECT_RSSI - WORST_RSSI))
u8 rssi;
+ lbs_deb_enter(LBS_DEB_SCAN);
+
cfp = libertas_find_cfp_by_band_and_channel(adapter, 0, bss->channel);
if (!cfp) {
lbs_deb_scan("Invalid channel number %d\n", bss->channel);
- return NULL;
+ start = NULL;
+ goto out;
}
/* First entry *MUST* be the AP BSSID */
start = iwe_stream_add_point(start, stop, &iwe, custom);
}
+out:
+ lbs_deb_leave_args(LBS_DEB_SCAN, "start %p", start);
return start;
}
/**
- * @brief Retrieve the scan table entries via wireless tools IOCTL call
+ * @brief Handle Retrieve scan table ioctl
*
* @param dev A pointer to net_device structure
* @param info A pointer to iw_request_info structure
struct bss_descriptor * iter_bss;
struct bss_descriptor * safe;
- lbs_deb_enter(LBS_DEB_ASSOC);
+ lbs_deb_enter(LBS_DEB_SCAN);
/* Update RSSI if current BSS is a locally created ad-hoc BSS */
if ((adapter->mode == IW_MODE_ADHOC) && adapter->adhoccreate) {
dwrq->length = (ev - extra);
dwrq->flags = 0;
- lbs_deb_leave(LBS_DEB_ASSOC);
+ lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", err);
return err;
}
+
+
+
+/*********************************************************************/
+/* */
+/* Command execution */
+/* */
+/*********************************************************************/
+
+
/**
* @brief Prepare a scan command to be sent to the firmware
*
- * Use the wlan_scan_cmd_config sent to the command processing module in
- * the libertas_prepare_and_send_command to configure a cmd_ds_802_11_scan command
- * struct to send to firmware.
+ * Called from libertas_prepare_and_send_command() in cmd.c
*
- * The fixed fields specifying the BSS type and BSSID filters as well as a
- * variable number/length of TLVs are sent in the command to firmware.
+ * Sends a fixed lenght data part (specifying the BSS type and BSSID filters)
+ * as well as a variable number/length of TLVs to the firmware.
*
* @param priv A pointer to wlan_private structure
* @param cmd A pointer to cmd_ds_command structure to be sent to
* to set the fields/TLVs for the command sent to firmware
*
* @return 0 or -1
- *
- * @sa wlan_scan_create_channel_list
*/
int libertas_cmd_80211_scan(wlan_private * priv,
struct cmd_ds_command *cmd, void *pdata_buf)
{
struct cmd_ds_802_11_scan *pscan = &cmd->params.scan;
- struct wlan_scan_cmd_config *pscancfg;
-
- lbs_deb_enter(LBS_DEB_ASSOC);
+ struct wlan_scan_cmd_config *pscancfg = pdata_buf;
- pscancfg = pdata_buf;
+ lbs_deb_enter(LBS_DEB_SCAN);
/* Set fixed field variables in scan command */
pscan->bsstype = pscancfg->bsstype;
cmd->size = cpu_to_le16(sizeof(pscan->bsstype) + ETH_ALEN
+ pscancfg->tlvbufferlen + S_DS_GEN);
- lbs_deb_scan("SCAN_CMD: command=%x, size=%x, seqnum=%x\n",
+ lbs_deb_scan("SCAN_CMD: command 0x%04x, size %d, seqnum %d\n",
le16_to_cpu(cmd->command), le16_to_cpu(cmd->size),
le16_to_cpu(cmd->seqnum));
- lbs_deb_leave(LBS_DEB_ASSOC);
+ lbs_deb_leave(LBS_DEB_SCAN);
return 0;
}
/**
* @brief This function handles the command response of scan
*
+ * Called from handle_cmd_response() in cmdrespc.
+ *
* The response buffer for the scan command has the following
* memory layout:
*
int tlvbufsize;
int ret;
- lbs_deb_enter(LBS_DEB_ASSOC);
+ lbs_deb_enter(LBS_DEB_SCAN);
/* Prune old entries from scan table */
list_for_each_entry_safe (iter_bss, safe, &adapter->network_list, list) {
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff