tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 6691381..a883f9d 100644 (file)
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -274,7 +274,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
        /* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
         * the Mentor registers (except for setup), use the TI ones and EOI.
         *
-        * Docs describe irq "vector" registers asociated with the CPPI and
+        * Docs describe irq "vector" registers associated with the CPPI and
         * USB EOI registers.  These hold a bitmask corresponding to the
         * current IRQ, not an irq handler address.  Would using those bits
         * resolve some of the races observed in this dispatch code??

diff --git a/drivers/zorro/zorro.ids b/drivers/zorro/zorro.ids
index 0c0f99e..de24e3d 100644 (file)
--- a/drivers/zorro/zorro.ids
+++ b/drivers/zorro/zorro.ids
@@ -108,7 +108,7 @@
        0c00  500XP/SupraDrive WordSync [SCSI Host Adapter]
        0d00  SupraDrive WordSync II [SCSI Host Adapter]
        1000  2400zi+ [Modem]
-0422  Computer Systems Assosiates
+0422  Computer Systems Associates
        1100  Magnum 40 [Accelerator and SCSI Host Adapter]
        1500  12 Gauge [SCSI Host Adapter]
 0439  Marc Michael Groth

diff --git a/include/net/irda/irttp.h b/include/net/irda/irttp.h
index 0788c23..11aee7a 100644 (file)
--- a/include/net/irda/irttp.h
+++ b/include/net/irda/irttp.h
@@ -97,7 +97,7 @@
 #define TTP_MAX_SDU_SIZE 0x01
 
 /*
- *  This structure contains all data assosiated with one instance of a TTP 
+ *  This structure contains all data associated with one instance of a TTP 
  *  connection.
  */
 struct tsap_cb {

diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index ecc3fa2..ec8a963 100644 (file)
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -520,7 +520,7 @@ out:
  *     signal. The occurence is latched into the irq controller hardware
  *     and must be acked in order to be reenabled. After the ack another
  *     interrupt can happen on the same source even before the first one
- *     is handled by the assosiacted event handler. If this happens it
+ *     is handled by the associated event handler. If this happens it
  *     might be necessary to disable (mask) the interrupt depending on the
  *     controller hardware. This requires to reenable the interrupt inside
  *     of the loop which handles the interrupts which have arrived while