[TG3]: Some low power fixes

Add some missing workarounds in tg3_set_power_state():

1. Workaround to prevent overdrawing current on 5714.

2. Do not power down 5700's PHY because of hw limitation.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index d869122..de898f1 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1042,17 +1042,26 @@ static void tg3_frob_aux_power(struct tg3 *tp)
                        udelay(100);
                } else {
                        u32 no_gpio2;
-                       u32 grc_local_ctrl;
+                       u32 grc_local_ctrl = 0;
 
                        if (tp_peer != tp &&
                            (tp_peer->tg3_flags & TG3_FLAG_INIT_COMPLETE) != 0)
                                return;
 
+                       /* Workaround to prevent overdrawing Amps. */
+                       if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
+                           ASIC_REV_5714) {
+                               grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3;
+                               tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl |
+                                      grc_local_ctrl);
+                               udelay(100);
+                       }
+
                        /* On 5753 and variants, GPIO2 cannot be used. */
                        no_gpio2 = tp->nic_sram_data_cfg &
                                    NIC_SRAM_DATA_CFG_NO_GPIO2;
 
-                       grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
+                       grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
                                         GRC_LCLCTRL_GPIO_OE1 |
                                         GRC_LCLCTRL_GPIO_OE2 |
                                         GRC_LCLCTRL_GPIO_OUTPUT1 |
@@ -1297,7 +1306,8 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
                        tg3_writephy(tp, MII_TG3_EXT_CTRL,
                                     MII_TG3_EXT_CTRL_FORCE_LED_OFF);
                        tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
-                       tg3_writephy(tp, MII_BMCR, BMCR_PDOWN);
+                       if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
+                               tg3_writephy(tp, MII_BMCR, BMCR_PDOWN);
                }
        }