/*
* HighPoint RR3xxx controller driver for Linux
- * Copyright (C) 2006 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
static char driver_name[] = "hptiop";
static const char driver_name_long[] = "RocketRAID 3xxx SATA Controller driver";
-static const char driver_ver[] = "v1.0 (060426)";
+static const char driver_ver[] = "v1.2 (070830)";
static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag);
static void hptiop_iop_request_callback(struct hptiop_hba *hba, u32 tag);
static void hptiop_request_callback(struct hptiop_hba *hba, u32 tag)
{
- if ((tag & IOPMU_QUEUE_MASK_HOST_BITS) == IOPMU_QUEUE_ADDR_HOST_BIT)
+ if (tag & IOPMU_QUEUE_ADDR_HOST_BIT)
return hptiop_host_request_callback(hba,
tag & ~IOPMU_QUEUE_ADDR_HOST_BIT);
else
hba->req_list = req;
}
-static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 tag)
+static void hptiop_host_request_callback(struct hptiop_hba *hba, u32 _tag)
{
struct hpt_iop_request_scsi_command *req;
struct scsi_cmnd *scp;
+ u32 tag;
+
+ if (hba->iopintf_v2) {
+ tag = _tag & ~ IOPMU_QUEUE_REQUEST_RESULT_BIT;
+ req = hba->reqs[tag].req_virt;
+ if (likely(_tag & IOPMU_QUEUE_REQUEST_RESULT_BIT))
+ req->header.result = IOP_RESULT_SUCCESS;
+ } else {
+ tag = _tag;
+ req = hba->reqs[tag].req_virt;
+ }
- req = (struct hpt_iop_request_scsi_command *)hba->reqs[tag].req_virt;
dprintk("hptiop_host_request_callback: req=%p, type=%d, "
"result=%d, context=0x%x tag=%d\n",
req, req->header.type, req->header.result,
goto cmd_done;
}
- req = (struct hpt_iop_request_scsi_command *)_req->req_virt;
+ req = _req->req_virt;
/* build S/G table */
sg_count = hptiop_buildsgl(scp, req->sg_list);
memcpy(req->cdb, scp->cmnd, sizeof(req->cdb));
- writel(IOPMU_QUEUE_ADDR_HOST_BIT | _req->req_shifted_phy,
- &hba->iop->inbound_queue);
+ if (hba->iopintf_v2) {
+ u32 size_bits;
+ if (req->header.size < 256)
+ size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT;
+ else if (req->header.size < 512)
+ size_bits = IOPMU_QUEUE_ADDR_HOST_BIT;
+ else
+ size_bits = IOPMU_QUEUE_REQUEST_SIZE_BIT |
+ IOPMU_QUEUE_ADDR_HOST_BIT;
+ writel(_req->req_shifted_phy | size_bits, &hba->iop->inbound_queue);
+ } else
+ writel(_req->req_shifted_phy | IOPMU_QUEUE_ADDR_HOST_BIT,
+ &hba->iop->inbound_queue);
return 0;
hba->pcidev = pcidev;
hba->host = host;
hba->initialized = 0;
+ hba->iopintf_v2 = 0;
atomic_set(&hba->resetting, 0);
atomic_set(&hba->reset_count, 0);
hba->max_request_size = le32_to_cpu(iop_config.request_size);
hba->max_sg_descriptors = le32_to_cpu(iop_config.max_sg_count);
hba->firmware_version = le32_to_cpu(iop_config.firmware_version);
+ hba->interface_version = le32_to_cpu(iop_config.interface_version);
hba->sdram_size = le32_to_cpu(iop_config.sdram_size);
+ if (hba->firmware_version > 0x01020000 ||
+ hba->interface_version > 0x01020000)
+ hba->iopintf_v2 = 1;
+
host->max_sectors = le32_to_cpu(iop_config.data_transfer_length) >> 9;
host->max_id = le32_to_cpu(iop_config.max_devices);
host->sg_tablesize = le32_to_cpu(iop_config.max_sg_count);
host->cmd_per_lun = le32_to_cpu(iop_config.max_requests);
host->max_cmd_len = 16;
- set_config.vbus_id = cpu_to_le32(host->host_no);
+ req_size = sizeof(struct hpt_iop_request_scsi_command)
+ + sizeof(struct hpt_iopsg) * (hba->max_sg_descriptors - 1);
+ if ((req_size & 0x1f) != 0)
+ req_size = (req_size + 0x1f) & ~0x1f;
+
+ memset(&set_config, 0, sizeof(struct hpt_iop_request_set_config));
set_config.iop_id = cpu_to_le32(host->host_no);
+ set_config.vbus_id = cpu_to_le16(host->host_no);
+ set_config.max_host_request_size = cpu_to_le16(req_size);
if (iop_set_config(hba, &set_config)) {
printk(KERN_ERR "scsi%d: set config failed\n",
}
/* Allocate request mem */
- req_size = sizeof(struct hpt_iop_request_scsi_command)
- + sizeof(struct hpt_iopsg) * (hba->max_sg_descriptors - 1);
- if ((req_size& 0x1f) != 0)
- req_size = (req_size + 0x1f) & ~0x1f;
dprintk("req_size=%d, max_requests=%d\n", req_size, hba->max_requests);
}
static struct pci_device_id hptiop_id_table[] = {
- { PCI_DEVICE(0x1103, 0x3220) },
- { PCI_DEVICE(0x1103, 0x3320) },
+ { PCI_VDEVICE(TTI, 0x3220) },
+ { PCI_VDEVICE(TTI, 0x3320) },
+ { PCI_VDEVICE(TTI, 0x3520) },
+ { PCI_VDEVICE(TTI, 0x4320) },
{},
};
module_exit(hptiop_module_exit);
MODULE_LICENSE("GPL");
+
/*
* HighPoint RR3xxx controller driver for Linux
- * Copyright (C) 2006 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#ifndef _HPTIOP_H_
#define _HPTIOP_H_
-/*
- * logical device type.
- * Identify array (logical device) and physical device.
- */
-#define LDT_ARRAY 1
-#define LDT_DEVICE 2
-
-/*
- * Array types
- */
-#define AT_UNKNOWN 0
-#define AT_RAID0 1
-#define AT_RAID1 2
-#define AT_RAID5 3
-#define AT_RAID6 4
-#define AT_JBOD 7
-
-#define MAX_NAME_LENGTH 36
-#define MAX_ARRAYNAME_LEN 16
-
-#define MAX_ARRAY_MEMBERS_V1 8
-#define MAX_ARRAY_MEMBERS_V2 16
-
-/* keep definition for source code compatiblity */
-#define MAX_ARRAY_MEMBERS MAX_ARRAY_MEMBERS_V1
-
-/*
- * array flags
- */
-#define ARRAY_FLAG_DISABLED 0x00000001 /* The array is disabled */
-#define ARRAY_FLAG_NEEDBUILDING 0x00000002 /* need to be rebuilt */
-#define ARRAY_FLAG_REBUILDING 0x00000004 /* in rebuilding process */
-#define ARRAY_FLAG_BROKEN 0x00000008 /* broken but still working */
-#define ARRAY_FLAG_BOOTDISK 0x00000010 /* has a active partition */
-#define ARRAY_FLAG_BOOTMARK 0x00000040 /* array has boot mark set */
-#define ARRAY_FLAG_NEED_AUTOREBUILD 0x00000080 /* auto-rebuild should start */
-#define ARRAY_FLAG_VERIFYING 0x00000100 /* is being verified */
-#define ARRAY_FLAG_INITIALIZING 0x00000200 /* is being initialized */
-#define ARRAY_FLAG_TRANSFORMING 0x00000400 /* tranform in progress */
-#define ARRAY_FLAG_NEEDTRANSFORM 0x00000800 /* array need tranform */
-#define ARRAY_FLAG_NEEDINITIALIZING 0x00001000 /* initialization not done */
-#define ARRAY_FLAG_BROKEN_REDUNDANT 0x00002000 /* broken but redundant */
-
-/*
- * device flags
- */
-#define DEVICE_FLAG_DISABLED 0x00000001 /* device is disabled */
-#define DEVICE_FLAG_UNINITIALIZED 0x00010000 /* device is not initialized */
-#define DEVICE_FLAG_LEGACY 0x00020000 /* lagacy drive */
-#define DEVICE_FLAG_IS_SPARE 0x80000000 /* is a spare disk */
-
-/*
- * ioctl codes
- */
-#define HPT_CTL_CODE(x) (x+0xFF00)
-#define HPT_CTL_CODE_LINUX_TO_IOP(x) ((x)-0xff00)
-
-#define HPT_IOCTL_GET_CONTROLLER_INFO HPT_CTL_CODE(2)
-#define HPT_IOCTL_GET_CHANNEL_INFO HPT_CTL_CODE(3)
-#define HPT_IOCTL_GET_LOGICAL_DEVICES HPT_CTL_CODE(4)
-#define HPT_IOCTL_GET_DRIVER_CAPABILITIES HPT_CTL_CODE(19)
-#define HPT_IOCTL_GET_DEVICE_INFO_V3 HPT_CTL_CODE(46)
-#define HPT_IOCTL_GET_CONTROLLER_INFO_V2 HPT_CTL_CODE(47)
-
-/*
- * Controller information.
- */
-struct hpt_controller_info {
- u8 chip_type; /* chip type */
- u8 interrupt_level; /* IRQ level */
- u8 num_buses; /* bus count */
- u8 chip_flags;
-
- u8 product_id[MAX_NAME_LENGTH];/* product name */
- u8 vendor_id[MAX_NAME_LENGTH]; /* vendor name */
-}
-__attribute__((packed));
-
-/*
- * Channel information.
- */
-struct hpt_channel_info {
- __le32 io_port; /* IDE Base Port Address */
- __le32 control_port; /* IDE Control Port Address */
- __le32 devices[2]; /* device connected to this channel */
-}
-__attribute__((packed));
-
-/*
- * Array information.
- */
-struct hpt_array_info_v3 {
- u8 name[MAX_ARRAYNAME_LEN]; /* array name */
- u8 description[64]; /* array description */
- u8 create_manager[16]; /* who created it */
- __le32 create_time; /* when created it */
-
- u8 array_type; /* array type */
- u8 block_size_shift; /* stripe size */
- u8 ndisk; /* Number of ID in Members[] */
- u8 reserved;
-
- __le32 flags; /* working flags, see ARRAY_FLAG_XXX */
- __le32 members[MAX_ARRAY_MEMBERS_V2]; /* member array/disks */
-
- __le32 rebuilding_progress;
- __le64 rebuilt_sectors; /* rebuilding point (LBA) for single member */
-
- __le32 transform_source;
- __le32 transform_target; /* destination device ID */
- __le32 transforming_progress;
- __le32 signature; /* persistent identification*/
- __le16 critical_members; /* bit mask of critical members */
- __le16 reserve2;
- __le32 reserve;
-}
-__attribute__((packed));
-
-/*
- * physical device information.
- */
-#define MAX_PARENTS_PER_DISK 8
-
-struct hpt_device_info_v2 {
- u8 ctlr_id; /* controller id */
- u8 path_id; /* bus */
- u8 target_id; /* id */
- u8 device_mode_setting; /* Current Data Transfer mode: 0-4 PIO0-4 */
- /* 5-7 MW DMA0-2, 8-13 UDMA0-5 */
- u8 device_type; /* device type */
- u8 usable_mode; /* highest usable mode */
-
-#ifdef __BIG_ENDIAN_BITFIELD
- u8 NCQ_enabled: 1;
- u8 NCQ_supported: 1;
- u8 TCQ_enabled: 1;
- u8 TCQ_supported: 1;
- u8 write_cache_enabled: 1;
- u8 write_cache_supported: 1;
- u8 read_ahead_enabled: 1;
- u8 read_ahead_supported: 1;
- u8 reserved6: 6;
- u8 spin_up_mode: 2;
-#else
- u8 read_ahead_supported: 1;
- u8 read_ahead_enabled: 1;
- u8 write_cache_supported: 1;
- u8 write_cache_enabled: 1;
- u8 TCQ_supported: 1;
- u8 TCQ_enabled: 1;
- u8 NCQ_supported: 1;
- u8 NCQ_enabled: 1;
- u8 spin_up_mode: 2;
- u8 reserved6: 6;
-#endif
-
- __le32 flags; /* working flags, see DEVICE_FLAG_XXX */
- u8 ident[150]; /* (partitial) Identify Data of this device */
-
- __le64 total_free;
- __le64 max_free;
- __le64 bad_sectors;
- __le32 parent_arrays[MAX_PARENTS_PER_DISK];
-}
-__attribute__((packed));
-
-/*
- * Logical device information.
- */
-#define INVALID_TARGET_ID 0xFF
-#define INVALID_BUS_ID 0xFF
-
-struct hpt_logical_device_info_v3 {
- u8 type; /* LDT_ARRAY or LDT_DEVICE */
- u8 cache_policy; /* refer to CACHE_POLICY_xxx */
- u8 vbus_id; /* vbus sequence in vbus_list */
- u8 target_id; /* OS target id. 0xFF is invalid */
- /* OS name: DISK $VBusId_$TargetId */
- __le64 capacity; /* array capacity */
- __le32 parent_array; /* don't use this field for physical
- device. use ParentArrays field in
- hpt_device_info_v2 */
- /* reserved statistic fields */
- __le32 stat1;
- __le32 stat2;
- __le32 stat3;
- __le32 stat4;
-
- union {
- struct hpt_array_info_v3 array;
- struct hpt_device_info_v2 device;
- } __attribute__((packed)) u;
-
-}
-__attribute__((packed));
-
-/*
- * ioctl structure
- */
-#define HPT_IOCTL_MAGIC 0xA1B2C3D4
-
-struct hpt_ioctl_u {
- u32 magic; /* used to check if it's a valid ioctl packet */
- u32 ioctl_code; /* operation control code */
- void __user *inbuf; /* input data buffer */
- u32 inbuf_size; /* size of input data buffer */
- void __user *outbuf; /* output data buffer */
- u32 outbuf_size; /* size of output data buffer */
- void __user *bytes_returned; /* count of bytes returned */
-}
-__attribute__((packed));
-
-
struct hpt_iopmu
{
__le32 resrved0[4];
#define IOPMU_QUEUE_EMPTY 0xffffffff
#define IOPMU_QUEUE_MASK_HOST_BITS 0xf0000000
#define IOPMU_QUEUE_ADDR_HOST_BIT 0x80000000
+#define IOPMU_QUEUE_REQUEST_SIZE_BIT 0x40000000
+#define IOPMU_QUEUE_REQUEST_RESULT_BIT 0x40000000
#define IOPMU_OUTBOUND_INT_MSG0 1
#define IOPMU_OUTBOUND_INT_MSG1 2
{
struct hpt_iop_request_header header;
__le32 iop_id;
- __le32 vbus_id;
+ __le16 vbus_id;
+ __le16 max_host_request_size;
__le32 reserve[6];
};
struct Scsi_Host * host;
struct pci_dev * pcidev;
- struct list_head link;
-
/* IOP config info */
+ u32 interface_version;
u32 firmware_version;
u32 sdram_size;
u32 max_devices;
u32 max_sg_descriptors;
u32 req_size; /* host-allocated request buffer size */
- int initialized;
- int msg_done;
+
+ int iopintf_v2: 1;
+ int initialized: 1;
+ int msg_done: 1;
struct hptiop_request * req_list;
struct hptiop_request reqs[HPTIOP_MAX_REQUESTS];
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff