--- /dev/null
+ Kprobe-based Event Tracer
+ =========================
+
+ Documentation is written by Masami Hiramatsu
+
+
+Overview
+--------
+This tracer is similar to the events tracer which is based on Tracepoint
+infrastructure. Instead of Tracepoint, this tracer is based on kprobes(kprobe
+and kretprobe). It probes anywhere where kprobes can probe(this means, all
+functions body except for __kprobes functions).
+
+Unlike the function tracer, this tracer can probe instructions inside of
+kernel functions. It allows you to check which instruction has been executed.
+
+Unlike the Tracepoint based events tracer, this tracer can add and remove
+probe points on the fly.
+
+Similar to the events tracer, this tracer doesn't need to be activated via
+current_tracer, instead of that, just set probe points via
+/sys/kernel/debug/tracing/kprobe_events. And you can set filters on each
+probe events via /sys/kernel/debug/tracing/events/kprobes/<EVENT>/filter.
+
+
+Synopsis of kprobe_events
+-------------------------
+ p[:EVENT] SYMBOL[+offs|-offs]|MEMADDR [FETCHARGS] : Set a probe
+ r[:EVENT] SYMBOL[+0] [FETCHARGS] : Set a return probe
+
+ EVENT : Event name.
+ SYMBOL[+offs|-offs] : Symbol+offset where the probe is inserted.
+ MEMADDR : Address where the probe is inserted.
+
+ FETCHARGS : Arguments.
+ %REG : Fetch register REG
+ sN : Fetch Nth entry of stack (N >= 0)
+ sa : Fetch stack address.
+ @ADDR : Fetch memory at ADDR (ADDR should be in kernel)
+ @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
+ aN : Fetch function argument. (N >= 0)(*)
+ rv : Fetch return value.(**)
+ ra : Fetch return address.(**)
+ +|-offs(FETCHARG) : fetch memory at FETCHARG +|- offs address.(***)
+
+ (*) aN may not correct on asmlinkaged functions and at the middle of
+ function body.
+ (**) only for return probe.
+ (***) this is useful for fetching a field of data structures.
+
+
+Per-Probe Event Filtering
+-------------------------
+ Per-probe event filtering feature allows you to set different filter on each
+probe and gives you what arguments will be shown in trace buffer. If an event
+name is specified right after 'p:' or 'r:' in kprobe_events, the tracer adds
+an event under tracing/events/kprobes/<EVENT>, at the directory you can see
+'id', 'enabled', 'format' and 'filter'.
+
+enabled:
+ You can enable/disable the probe by writing 1 or 0 on it.
+
+format:
+ It shows the format of this probe event. It also shows aliases of arguments
+ which you specified to kprobe_events.
+
+filter:
+ You can write filtering rules of this event. And you can use both of aliase
+ names and field names for describing filters.
+
+
+Usage examples
+--------------
+To add a probe as a new event, write a new definition to kprobe_events
+as below.
+
+ echo p:myprobe do_sys_open a0 a1 a2 a3 > /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kprobe on the top of do_sys_open() function with recording
+1st to 4th arguments as "myprobe" event.
+
+ echo r:myretprobe do_sys_open rv ra >> /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kretprobe on the return point of do_sys_open() function with
+recording return value and return address as "myretprobe" event.
+ You can see the format of these events via
+/sys/kernel/debug/tracing/events/kprobes/<EVENT>/format.
+
+ cat /sys/kernel/debug/tracing/events/kprobes/myprobe/format
+name: myprobe
+ID: 23
+format:
+ field:unsigned short common_type; offset:0; size:2;
+ field:unsigned char common_flags; offset:2; size:1;
+ field:unsigned char common_preempt_count; offset:3; size:1;
+ field:int common_pid; offset:4; size:4;
+ field:int common_tgid; offset:8; size:4;
+
+ field: unsigned long ip; offset:16;tsize:8;
+ field: int nargs; offset:24;tsize:4;
+ field: unsigned long arg0; offset:32;tsize:8;
+ field: unsigned long arg1; offset:40;tsize:8;
+ field: unsigned long arg2; offset:48;tsize:8;
+ field: unsigned long arg3; offset:56;tsize:8;
+
+ alias: a0; original: arg0;
+ alias: a1; original: arg1;
+ alias: a2; original: arg2;
+ alias: a3; original: arg3;
+
+print fmt: "%lx: 0x%lx 0x%lx 0x%lx 0x%lx", ip, arg0, arg1, arg2, arg3
+
+
+ You can see that the event has 4 arguments and alias expressions
+corresponding to it.
+
+ echo > /sys/kernel/debug/tracing/kprobe_events
+
+ This clears all probe points. and you can see the traced information via
+/sys/kernel/debug/tracing/trace.
+
+ cat /sys/kernel/debug/tracing/trace
+# tracer: nop
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ <...>-1447 [001] 1038282.286875: do_sys_open+0x0/0xd6: 0x3 0x7fffd1ec4440 0x8000 0x0
+ <...>-1447 [001] 1038282.286878: sys_openat+0xc/0xe <- do_sys_open: 0xfffffffffffffffe 0xffffffff81367a3a
+ <...>-1447 [001] 1038282.286885: do_sys_open+0x0/0xd6: 0xffffff9c 0x40413c 0x8000 0x1b6
+ <...>-1447 [001] 1038282.286915: sys_open+0x1b/0x1d <- do_sys_open: 0x3 0xffffffff81367a3a
+ <...>-1447 [001] 1038282.286969: do_sys_open+0x0/0xd6: 0xffffff9c 0x4041c6 0x98800 0x10
+ <...>-1447 [001] 1038282.286976: sys_open+0x1b/0x1d <- do_sys_open: 0x3 0xffffffff81367a3a
+
+
+ Each line shows when the kernel hits a probe, and <- SYMBOL means kernel
+returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
+returns from do_sys_open to sys_open+0x1b).
+
+
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff