x86, olpc: Use pci subarch init for OLPC

Replace the #ifdef'ed OLPC-specific init functions by a conditional
x86_init function.  If the function returns 0 we leave pci_arch_init,
otherwise we continue.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Andres Salomon <dilinger@collabora.co.uk>
LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318CE89@orsmsx508.amr.corp.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h
index 3a57385..101229b 100644 (file)
--- a/arch/x86/include/asm/olpc.h
+++ b/arch/x86/include/asm/olpc.h
@@ -13,7 +13,6 @@ struct olpc_platform_t {
 
 #define OLPC_F_PRESENT         0x01
 #define OLPC_F_DCON            0x02
-#define OLPC_F_VSA             0x04
 
 #ifdef CONFIG_OLPC
 
@@ -51,18 +50,6 @@ static inline int olpc_has_dcon(void)
 }
 
 /*
- * The VSA is software from AMD that typical Geode bioses will include.
- * It is used to emulate the PCI bus, VGA, etc.  OLPC's Open Firmware does
- * not include the VSA; instead, PCI is emulated by the kernel.
- *
- * The VSA is described further in arch/x86/pci/olpc.c.
- */
-static inline int olpc_has_vsa(void)
-{
-       return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
-}
-
-/*
  * The "Mass Production" version of OLPC's XO is identified as being model
  * C2.  During the prototype phase, the following models (in chronological
  * order) were created: A1, B1, B2, B3, B4, C1.  The A1 through B2 models
@@ -87,13 +74,10 @@ static inline int olpc_has_dcon(void)
        return 0;
 }
 
-static inline int olpc_has_vsa(void)
-{
-       return 0;
-}
-
 #endif
 
+extern int pci_olpc_init(void);
+
 /* EC related functions */
 
 extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,

diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 6e69edf..3608551 100644 (file)
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -104,7 +104,6 @@ extern bool port_cf9_safe;
 extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
-extern int pci_olpc_init(void);
 extern void __init dmi_check_pciprobe(void);
 extern void __init dmi_check_skip_isa_align(void);
 

diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c
index 9d1d263..8297160 100644 (file)
--- a/arch/x86/kernel/olpc.c
+++ b/arch/x86/kernel/olpc.c
@@ -17,7 +17,9 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/string.h>
+
 #include <asm/geode.h>
+#include <asm/setup.h>
 #include <asm/olpc.h>
 
 #ifdef CONFIG_OPEN_FIRMWARE
@@ -243,9 +245,11 @@ static int __init olpc_init(void)
        olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0,
                        (unsigned char *) &olpc_platform_info.ecver, 1);
 
-       /* check to see if the VSA exists */
-       if (cs5535_has_vsa2())
-               olpc_platform_info.flags |= OLPC_F_VSA;
+#ifdef CONFIG_PCI_OLPC
+       /* If the VSA exists let it emulate PCI, if not emulate in kernel */
+       if (!cs5535_has_vsa2())
+               x86_init.pci.arch_init = pci_olpc_init;
+#endif
 
        printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n",
                        ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "",

diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index 25a1f8e..adb62aa 100644 (file)
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -1,6 +1,7 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <asm/pci_x86.h>
+#include <asm/x86_init.h>
 
 /* arch_initcall has too random ordering, so call the initializers
    in the right sequence from here. */
@@ -15,10 +16,9 @@ static __init int pci_arch_init(void)
        if (!(pci_probe & PCI_PROBE_NOEARLY))
                pci_mmcfg_early_init();
 
-#ifdef CONFIG_PCI_OLPC
-       if (!pci_olpc_init())
-               return 0;       /* skip additional checks if it's an XO */
-#endif
+       if (x86_init.pci.arch_init && !x86_init.pci.arch_init())
+               return 0;
+
 #ifdef CONFIG_PCI_BIOS
        pci_pcbios_init();
 #endif

diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index b889d82..b348154 100644 (file)
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -304,9 +304,6 @@ static struct pci_raw_ops pci_olpc_conf = {
 
 int __init pci_olpc_init(void)
 {
-       if (!machine_is_olpc() || olpc_has_vsa())
-               return -ENODEV;
-
        printk(KERN_INFO "PCI: Using configuration type OLPC\n");
        raw_pci_ops = &pci_olpc_conf;
        is_lx = is_geode_lx();