Blackfin: remove CONFIG_DEBUG_VERBOSE from trace.c

Now that the split traps code has moved all the verbose output to the
trace.c file, we can unify all the CONFIG_DEBUG_VERBOSE handling.  This
gets rid of much of the crappy ifdef forest and enables usage of normal
pr_xxx functions so checkpatch stops complaining.

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index e6485c3..121cc04 100644 (file)
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -39,9 +39,15 @@ extern unsigned long sclk_to_usecs(unsigned long sclk);
 extern unsigned long usecs_to_sclk(unsigned long usecs);
 
 struct pt_regs;
+#if defined(CONFIG_DEBUG_VERBOSE)
 extern void dump_bfin_process(struct pt_regs *regs);
 extern void dump_bfin_mem(struct pt_regs *regs);
 extern void dump_bfin_trace_buffer(void);
+#else
+#define dump_bfin_process(regs)
+#define dump_bfin_mem(regs)
+#define dump_bfin_trace_buffer()
+#endif
 
 /* init functions only */
 extern int init_arch_irq(void);

diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h
index 395decd..9117939 100644 (file)
--- a/arch/blackfin/include/asm/trace.h
+++ b/arch/blackfin/include/asm/trace.h
@@ -23,8 +23,13 @@
 #ifndef __ASSEMBLY__
 extern unsigned long trace_buff_offset;
 extern unsigned long software_trace_buff[];
+#if defined(CONFIG_DEBUG_VERBOSE)
 extern void decode_address(char *buf, unsigned long address);
 extern bool get_instruction(unsigned short *val, unsigned short *address);
+#else
+#define decode_address(buf, address)
+#define get_instruction(val, address) 0
+#endif
 
 /* Trace Macros for C files */
 

diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index b32a04a..2fc7f32 100644 (file)
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -8,7 +8,7 @@ obj-y := \
        entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
        sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
        fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o \
-       trace.o exception.o dumpstack.o
+       exception.o dumpstack.o
 
 ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
     obj-y += time-ts.o
@@ -30,6 +30,7 @@ obj-$(CONFIG_NMI_WATCHDOG)           += nmi.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
 obj-$(CONFIG_EARLY_PRINTK)           += shadow_console.o
 obj-$(CONFIG_STACKTRACE)             += stacktrace.o
+obj-$(CONFIG_DEBUG_VERBOSE)          += trace.o
 
 # the kgdb test puts code into L2 and without linker
 # relaxation, we need to force long calls to/from it

diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c
index 3a268c3..6e37a87 100644 (file)
--- a/arch/blackfin/kernel/trace.c
+++ b/arch/blackfin/kernel/trace.c
@@ -20,18 +20,8 @@
 #include <asm/fixed_code.h>
 #include <asm/traps.h>
 
-#ifdef CONFIG_DEBUG_VERBOSE
-#define verbose_printk(fmt, arg...) \
-       printk(fmt, ##arg)
-#else
-#define verbose_printk(fmt, arg...) \
-       ({ if (0) printk(fmt, ##arg); 0; })
-#endif
-
-
 void decode_address(char *buf, unsigned long address)
 {
-#ifdef CONFIG_DEBUG_VERBOSE
        struct task_struct *p;
        struct mm_struct *mm;
        unsigned long flags, offset;
@@ -174,9 +164,6 @@ void decode_address(char *buf, unsigned long address)
 
 done:
        write_unlock_irqrestore(&tasklist_lock, flags);
-#else
-       sprintf(buf, " ");
-#endif
 }
 
 #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
@@ -219,52 +206,52 @@ bool get_instruction(unsigned short *val, unsigned short *address)
  * These are the normal instructions which cause change of flow, which
  * would be at the source of the trace buffer
  */
-#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
+#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
 static void decode_instruction(unsigned short *address)
 {
        unsigned short opcode;
 
        if (get_instruction(&opcode, address)) {
                if (opcode == 0x0010)
-                       verbose_printk("RTS");
+                       pr_cont("RTS");
                else if (opcode == 0x0011)
-                       verbose_printk("RTI");
+                       pr_cont("RTI");
                else if (opcode == 0x0012)
-                       verbose_printk("RTX");
+                       pr_cont("RTX");
                else if (opcode == 0x0013)
-                       verbose_printk("RTN");
+                       pr_cont("RTN");
                else if (opcode == 0x0014)
-                       verbose_printk("RTE");
+                       pr_cont("RTE");
                else if (opcode == 0x0025)
-                       verbose_printk("EMUEXCPT");
+                       pr_cont("EMUEXCPT");
                else if (opcode >= 0x0040 && opcode <= 0x0047)
-                       verbose_printk("STI R%i", opcode & 7);
+                       pr_cont("STI R%i", opcode & 7);
                else if (opcode >= 0x0050 && opcode <= 0x0057)
-                       verbose_printk("JUMP (P%i)", opcode & 7);
+                       pr_cont("JUMP (P%i)", opcode & 7);
                else if (opcode >= 0x0060 && opcode <= 0x0067)
-                       verbose_printk("CALL (P%i)", opcode & 7);
+                       pr_cont("CALL (P%i)", opcode & 7);
                else if (opcode >= 0x0070 && opcode <= 0x0077)
-                       verbose_printk("CALL (PC+P%i)", opcode & 7);
+                       pr_cont("CALL (PC+P%i)", opcode & 7);
                else if (opcode >= 0x0080 && opcode <= 0x0087)
-                       verbose_printk("JUMP (PC+P%i)", opcode & 7);
+                       pr_cont("JUMP (PC+P%i)", opcode & 7);
                else if (opcode >= 0x0090 && opcode <= 0x009F)
-                       verbose_printk("RAISE 0x%x", opcode & 0xF);
+                       pr_cont("RAISE 0x%x", opcode & 0xF);
                else if (opcode >= 0x00A0 && opcode <= 0x00AF)
-                       verbose_printk("EXCPT 0x%x", opcode & 0xF);
+                       pr_cont("EXCPT 0x%x", opcode & 0xF);
                else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
-                       verbose_printk("IF !CC JUMP");
+                       pr_cont("IF !CC JUMP");
                else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
-                       verbose_printk("IF CC JUMP");
+                       pr_cont("IF CC JUMP");
                else if (opcode >= 0x2000 && opcode <= 0x2fff)
-                       verbose_printk("JUMP.S");
+                       pr_cont("JUMP.S");
                else if (opcode >= 0xe080 && opcode <= 0xe0ff)
-                       verbose_printk("LSETUP");
+                       pr_cont("LSETUP");
                else if (opcode >= 0xe200 && opcode <= 0xe2ff)
-                       verbose_printk("JUMP.L");
+                       pr_cont("JUMP.L");
                else if (opcode >= 0xe300 && opcode <= 0xe3ff)
-                       verbose_printk("CALL pcrel");
+                       pr_cont("CALL pcrel");
                else
-                       verbose_printk("0x%04x", opcode);
+                       pr_cont("0x%04x", opcode);
        }
 
 }
@@ -272,7 +259,6 @@ static void decode_instruction(unsigned short *address)
 
 void dump_bfin_trace_buffer(void)
 {
-#ifdef CONFIG_DEBUG_VERBOSE
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
        int tflags, i = 0;
        char buf[150];
@@ -283,21 +269,21 @@ void dump_bfin_trace_buffer(void)
 
        trace_buffer_save(tflags);
 
-       printk(KERN_NOTICE "Hardware Trace:\n");
+       pr_notice("Hardware Trace:\n");
 
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-       printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
+       pr_notice("WARNING: Expanded trace turned on - can not trace exceptions\n");
 #endif
 
        if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
                for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
                        decode_address(buf, (unsigned long)bfin_read_TBUF());
-                       printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
+                       pr_notice("%4i Target : %s\n", i, buf);
                        addr = (unsigned short *)bfin_read_TBUF();
                        decode_address(buf, (unsigned long)addr);
-                       printk(KERN_NOTICE "     Source : %s ", buf);
+                       pr_notice("     Source : %s ", buf);
                        decode_instruction(addr);
-                       printk("\n");
+                       pr_cont("\n");
                }
        }
 
@@ -310,14 +296,14 @@ void dump_bfin_trace_buffer(void)
        j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
        while (j) {
                decode_address(buf, software_trace_buff[index]);
-               printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
+               pr_notice("%4i Target : %s\n", i, buf);
                index -= 1;
                if (index < 0)
                        index = EXPAND_LEN;
                decode_address(buf, software_trace_buff[index]);
-               printk(KERN_NOTICE "     Source : %s ", buf);
+               pr_notice("     Source : %s ", buf);
                decode_instruction((unsigned short *)software_trace_buff[index]);
-               printk("\n");
+               pr_cont("\n");
                index -= 1;
                if (index < 0)
                        index = EXPAND_LEN;
@@ -328,78 +314,73 @@ void dump_bfin_trace_buffer(void)
 
        trace_buffer_restore(tflags);
 #endif
-#endif
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
 void dump_bfin_process(struct pt_regs *fp)
 {
-#ifdef CONFIG_DEBUG_VERBOSE
        /* We should be able to look at fp->ipend, but we don't push it on the
         * stack all the time, so do this until we fix that */
        unsigned int context = bfin_read_IPEND();
 
        if (oops_in_progress)
-               verbose_printk(KERN_EMERG "Kernel OOPS in progress\n");
+               pr_emerg("Kernel OOPS in progress\n");
 
        if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
-               verbose_printk(KERN_NOTICE "HW Error context\n");
+               pr_notice("HW Error context\n");
        else if (context & 0x0020)
-               verbose_printk(KERN_NOTICE "Deferred Exception context\n");
+               pr_notice("Deferred Exception context\n");
        else if (context & 0x3FC0)
-               verbose_printk(KERN_NOTICE "Interrupt context\n");
+               pr_notice("Interrupt context\n");
        else if (context & 0x4000)
-               verbose_printk(KERN_NOTICE "Deferred Interrupt context\n");
+               pr_notice("Deferred Interrupt context\n");
        else if (context & 0x8000)
-               verbose_printk(KERN_NOTICE "Kernel process context\n");
+               pr_notice("Kernel process context\n");
 
        /* Because we are crashing, and pointers could be bad, we check things
         * pretty closely before we use them
         */
        if ((unsigned long)current >= FIXED_CODE_START &&
            !((unsigned long)current & 0x3) && current->pid) {
-               verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
+               pr_notice("CURRENT PROCESS:\n");
                if (current->comm >= (char *)FIXED_CODE_START)
-                       verbose_printk(KERN_NOTICE "COMM=%s PID=%d",
+                       pr_notice("COMM=%s PID=%d",
                                current->comm, current->pid);
                else
-                       verbose_printk(KERN_NOTICE "COMM= invalid");
+                       pr_notice("COMM= invalid");
 
-               printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu);
-               if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-                       verbose_printk(KERN_NOTICE
-                               "TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
-                               " BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
+               pr_cont("  CPU=%d\n", current_thread_info()->cpu);
+               if (!((unsigned long)current->mm & 0x3) &&
+                       (unsigned long)current->mm >= FIXED_CODE_START) {
+                       pr_notice("TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n",
                                (void *)current->mm->start_code,
                                (void *)current->mm->end_code,
                                (void *)current->mm->start_data,
-                               (void *)current->mm->end_data,
+                               (void *)current->mm->end_data);
+                       pr_notice(" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
                                (void *)current->mm->end_data,
                                (void *)current->mm->brk,
                                (void *)current->mm->start_stack);
-               else
-                       verbose_printk(KERN_NOTICE "invalid mm\n");
+               } else
+                       pr_notice("invalid mm\n");
        } else
-               verbose_printk(KERN_NOTICE
-                              "No Valid process in current context\n");
-#endif
+               pr_notice("No Valid process in current context\n");
 }
 
 void dump_bfin_mem(struct pt_regs *fp)
 {
-#ifdef CONFIG_DEBUG_VERBOSE
        unsigned short *addr, *erraddr, val = 0, err = 0;
        char sti = 0, buf[6];
 
        erraddr = (void *)fp->pc;
 
-       verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
+       pr_notice("return address: [0x%p]; contents of:", erraddr);
 
        for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
             addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
             addr++) {
                if (!((unsigned long)addr & 0xF))
-                       verbose_printk(KERN_NOTICE "0x%p: ", addr);
+                       pr_notice("0x%p: ", addr);
 
                if (!get_instruction(&val, addr)) {
                                val = 0;
@@ -408,10 +389,10 @@ void dump_bfin_mem(struct pt_regs *fp)
                        sprintf(buf, "%04x", val);
 
                if (addr == erraddr) {
-                       verbose_printk("[%s]", buf);
+                       pr_cont("[%s]", buf);
                        err = val;
                } else
-                       verbose_printk(" %s ", buf);
+                       pr_cont(" %s ", buf);
 
                /* Do any previous instructions turn on interrupts? */
                if (addr <= erraddr &&                          /* in the past */
@@ -420,16 +401,15 @@ void dump_bfin_mem(struct pt_regs *fp)
                        sti = 1;
        }
 
-       verbose_printk("\n");
+       pr_cont("\n");
 
        /* Hardware error interrupts can be deferred */
        if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
            oops_in_progress)){
-               verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
+               pr_notice("Looks like this was a deferred error - sorry\n");
 #ifndef CONFIG_DEBUG_HWERR
-               verbose_printk(KERN_NOTICE
-"The remaining message may be meaningless\n"
-"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
+               pr_notice("The remaining message may be meaningless\n");
+               pr_notice("You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
 #else
                /* If we are handling only one peripheral interrupt
                 * and current mm and pid are valid, and the last error
@@ -441,20 +421,18 @@ void dump_bfin_mem(struct pt_regs *fp)
                        /* And the last RETI points to the current userspace context */
                        if ((fp + 1)->pc >= current->mm->start_code &&
                            (fp + 1)->pc <= current->mm->end_code) {
-                               verbose_printk(KERN_NOTICE "It might be better to look around here :\n");
-                               verbose_printk(KERN_NOTICE "-------------------------------------------\n");
+                               pr_notice("It might be better to look around here :\n");
+                               pr_notice("-------------------------------------------\n");
                                show_regs(fp + 1);
-                               verbose_printk(KERN_NOTICE "-------------------------------------------\n");
+                               pr_notice("-------------------------------------------\n");
                        }
                }
 #endif
        }
-#endif
 }
 
 void show_regs(struct pt_regs *fp)
 {
-#ifdef CONFIG_DEBUG_VERBOSE
        char buf[150];
        struct irqaction *action;
        unsigned int i;
@@ -462,19 +440,19 @@ void show_regs(struct pt_regs *fp)
        unsigned int cpu = raw_smp_processor_id();
        unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
 
-       verbose_printk(KERN_NOTICE "\n");
+       pr_notice("\n");
        if (CPUID != bfin_cpuid())
-               verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), "
+               pr_notice("Compiled for cpu family 0x%04x (Rev %d), "
                        "but running on:0x%04x (Rev %d)\n",
                        CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
 
-       verbose_printk(KERN_NOTICE "ADSP-%s-0.%d",
+       pr_notice("ADSP-%s-0.%d",
                CPU, bfin_compiled_revid());
 
        if (bfin_compiled_revid() !=  bfin_revid())
-               verbose_printk("(Detected 0.%d)", bfin_revid());
+               pr_cont("(Detected 0.%d)", bfin_revid());
 
-       verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
+       pr_cont(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
                get_cclk()/1000000, get_sclk()/1000000,
 #ifdef CONFIG_MPU
                "mpu on"
@@ -483,40 +461,40 @@ void show_regs(struct pt_regs *fp)
 #endif
                );
 
-       verbose_printk(KERN_NOTICE "%s", linux_banner);
+       pr_notice("%s", linux_banner);
 
-       verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
-       verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
+       pr_notice("\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
+       pr_notice(" SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
                (long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
        if (fp->ipend & EVT_IRPTEN)
-               verbose_printk(KERN_NOTICE "  Global Interrupts Disabled (IPEND[4])\n");
+               pr_notice("  Global Interrupts Disabled (IPEND[4])\n");
        if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
                        EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
-               verbose_printk(KERN_NOTICE "  Peripheral interrupts masked off\n");
+               pr_notice("  Peripheral interrupts masked off\n");
        if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
-               verbose_printk(KERN_NOTICE "  Kernel interrupts masked off\n");
+               pr_notice("  Kernel interrupts masked off\n");
        if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
-               verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
+               pr_notice("  HWERRCAUSE: 0x%lx\n",
                        (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
 #ifdef EBIU_ERRMST
                /* If the error was from the EBIU, print it out */
                if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
-                       verbose_printk(KERN_NOTICE "  EBIU Error Reason  : 0x%04x\n",
+                       pr_notice("  EBIU Error Reason  : 0x%04x\n",
                                bfin_read_EBIU_ERRMST());
-                       verbose_printk(KERN_NOTICE "  EBIU Error Address : 0x%08x\n",
+                       pr_notice("  EBIU Error Address : 0x%08x\n",
                                bfin_read_EBIU_ERRADD());
                }
 #endif
        }
-       verbose_printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
+       pr_notice("  EXCAUSE   : 0x%lx\n",
                fp->seqstat & SEQSTAT_EXCAUSE);
        for (i = 2; i <= 15 ; i++) {
                if (fp->ipend & (1 << i)) {
                        if (i != 4) {
                                decode_address(buf, bfin_read32(EVT0 + 4*i));
-                               verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
+                               pr_notice("  physical IVG%i asserted : %s\n", i, buf);
                        } else
-                               verbose_printk(KERN_NOTICE "  interrupts disabled\n");
+                               pr_notice("  interrupts disabled\n");
                }
        }
 
@@ -531,12 +509,12 @@ void show_regs(struct pt_regs *fp)
                                goto unlock;
 
                        decode_address(buf, (unsigned int)action->handler);
-                       verbose_printk(KERN_NOTICE "  logical irq %3d mapped  : %s", i, buf);
+                       pr_notice("  logical irq %3d mapped  : %s", i, buf);
                        for (action = action->next; action; action = action->next) {
                                decode_address(buf, (unsigned int)action->handler);
-                               verbose_printk(", %s", buf);
+                               pr_cont(", %s", buf);
                        }
-                       verbose_printk("\n");
+                       pr_cont("\n");
 unlock:
                        if (!in_atomic)
                                raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
@@ -544,51 +522,50 @@ unlock:
        }
 
        decode_address(buf, fp->rete);
-       verbose_printk(KERN_NOTICE " RETE: %s\n", buf);
+       pr_notice(" RETE: %s\n", buf);
        decode_address(buf, fp->retn);
-       verbose_printk(KERN_NOTICE " RETN: %s\n", buf);
+       pr_notice(" RETN: %s\n", buf);
        decode_address(buf, fp->retx);
-       verbose_printk(KERN_NOTICE " RETX: %s\n", buf);
+       pr_notice(" RETX: %s\n", buf);
        decode_address(buf, fp->rets);
-       verbose_printk(KERN_NOTICE " RETS: %s\n", buf);
+       pr_notice(" RETS: %s\n", buf);
        decode_address(buf, fp->pc);
-       verbose_printk(KERN_NOTICE " PC  : %s\n", buf);
+       pr_notice(" PC  : %s\n", buf);
 
        if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
            (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
                decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
-               verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
+               pr_notice("DCPLB_FAULT_ADDR: %s\n", buf);
                decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
-               verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
+               pr_notice("ICPLB_FAULT_ADDR: %s\n", buf);
        }
 
-       verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
-       verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
+       pr_notice("PROCESSOR STATE:\n");
+       pr_notice(" R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
                fp->r0, fp->r1, fp->r2, fp->r3);
-       verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
+       pr_notice(" R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
                fp->r4, fp->r5, fp->r6, fp->r7);
-       verbose_printk(KERN_NOTICE " P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
+       pr_notice(" P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
                fp->p0, fp->p1, fp->p2, fp->p3);
-       verbose_printk(KERN_NOTICE " P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
+       pr_notice(" P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
                fp->p4, fp->p5, fp->fp, (long)fp);
-       verbose_printk(KERN_NOTICE " LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
+       pr_notice(" LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
                fp->lb0, fp->lt0, fp->lc0);
-       verbose_printk(KERN_NOTICE " LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
+       pr_notice(" LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
                fp->lb1, fp->lt1, fp->lc1);
-       verbose_printk(KERN_NOTICE " B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
+       pr_notice(" B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
                fp->b0, fp->l0, fp->m0, fp->i0);
-       verbose_printk(KERN_NOTICE " B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
+       pr_notice(" B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
                fp->b1, fp->l1, fp->m1, fp->i1);
-       verbose_printk(KERN_NOTICE " B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
+       pr_notice(" B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
                fp->b2, fp->l2, fp->m2, fp->i2);
-       verbose_printk(KERN_NOTICE " B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
+       pr_notice(" B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
                fp->b3, fp->l3, fp->m3, fp->i3);
-       verbose_printk(KERN_NOTICE "A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
+       pr_notice("A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
                fp->a0w, fp->a0x, fp->a1w, fp->a1x);
 
-       verbose_printk(KERN_NOTICE "USP : %08lx  ASTAT: %08lx\n",
+       pr_notice("USP : %08lx  ASTAT: %08lx\n",
                rdusp(), fp->astat);
 
-       verbose_printk(KERN_NOTICE "\n");
-#endif
+       pr_notice("\n");
 }

diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 891cc39..7c31a3d 100644 (file)
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -554,3 +554,11 @@ int is_valid_bugaddr(unsigned long addr)
        return opcode == BFIN_BUG_OPCODE;
 }
 #endif
+
+/* stub this out */
+#ifndef CONFIG_DEBUG_VERBOSE
+void show_regs(struct pt_regs *fp)
+{
+
+}
+#endif