* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
OMAP: cs should be positive in gpmc_cs_free()
omap: fix unlikely(x) < y
omap3: clock: Fixed dpll3_m2x2 rate calculation
omap3: clock: Fix the DPLL freqsel computations
omap: Fix keymap for zoom2 according to matrix keypad framwork
exit(EXIT_FAILURE);
}
-int checked_open(const char *pathname, int flags)
+static int checked_open(const char *pathname, int flags)
{
int fd = open(pathname, flags);
KMEMCHECK
M: Vegard Nossum <vegardno@ifi.uio.no>
-P Pekka Enberg
-M: penberg@cs.helsinki.fi
+M: Pekka Enberg <penberg@cs.helsinki.fi>
S: Maintained
+F: Documentation/kmemcheck.txt
+F: arch/x86/include/asm/kmemcheck.h
+F: arch/x86/mm/kmemcheck/
+F: include/linux/kmemcheck.h
+F: mm/kmemcheck.c
KMEMLEAK
M: Catalin Marinas <catalin.marinas@arm.com>
RALINK RT2X00 WIRELESS LAN DRIVER
P: rt2x00 project
+M: Ivo van Doorn <IvDoorn@gmail.com>
+M: Gertjan van Wingerde <gwingerde@gmail.com>
L: linux-wireless@vger.kernel.org
L: users@rt2x00.serialmonkey.com (moderated for non-subscribers)
W: http://rt2x00.serialmonkey.com/
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-F Documentation/rfkill.txt
+F: Documentation/rfkill.txt
F: net/rfkill/
RISCOM8 DRIVER
HOSTCC = gcc
HOSTCXX = g++
-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
HOSTCXXFLAGS = -O2
# Decide whether to build built-in, modular, or both.
const char * prog_name;
-void
+static void
usage (void)
{
fprintf(stderr,
#define F_GETOWN 6 /* for sockets. */
#define F_SETSIG 10 /* for sockets. */
#define F_GETSIG 11 /* for sockets. */
-#define F_SETOWN_EX 15
-#define F_GETOWN_EX 16
/* for posix fcntl() and lockf() */
#define F_RDLCK 1
help
Select this if you are using the Adeneo Neocore 926 board.
-config MACH_AT91SAM9G20EK_2MMC
- bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
- depends on ARCH_AT91SAM9G20
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- Rev A or B modified for 2 MMC Slots.
-
endif
# ----------------------------------------------------------
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
depends on ARCH_AT91SAM9G20
help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+ Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+ that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+ with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+ onwards.
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
config MTD_NAND_ATMEL_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_ATMELMCI)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PC12,
+ .phy_irq_pin = AT91_PIN_PB0,
.is_rmii = 1,
};
/*
* MCI (SD/MMC)
- * det_pin and wp_pin are not connected
+ * wp_pin is not connected
*/
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static struct mci_platform_data __initdata ek_mmc_data = {
.slot[0] = {
.bus_width = 4,
- .detect_pin = -ENODEV,
+ .detect_pin = AT91_PIN_PC2,
.wp_pin = -ENODEV,
},
.slot[1] = {
.bus_width = 4,
- .detect_pin = -ENODEV,
+ .detect_pin = AT91_PIN_PC9,
.wp_pin = -ENODEV,
},
};
#else
-static struct amci_platform_data __initdata ek_mmc_data = {
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .slot_b = 1, /* Only one slot so use slot B */
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PC9,
};
#endif
static struct gpio_led ek_leds[] = {
{ /* "bottom" led, green, userled1 to be defined */
.name = "ds5",
- .gpio = AT91_PIN_PB12,
+ .gpio = AT91_PIN_PB8,
.active_low = 1,
.default_trigger = "none",
},
{ /* "power" led, yellow */
.name = "ds1",
- .gpio = AT91_PIN_PB13,
+ .gpio = AT91_PIN_PB9,
.default_trigger = "heartbeat",
}
};
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
at91_add_device_mci(0, &ek_mmc_data);
+#else
+ at91_add_device_mmc(0, &ek_mmc_data);
+#endif
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
+ /*
+ * Disable propagation of mbus errors to the CPU local bus,
+ * as this causes mbus errors (which can occur for example
+ * for PCI aborts) to throw CPU aborts, which we're not set
+ * up to deal with.
+ */
+ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
kirkwood_setup_cpu_mbus();
#ifdef CONFIG_CACHE_FEROCEON_L2
#include <mach/kirkwood.h>
+#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG_ERROR_PROP 0x00000004
+
#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
#define CPU_RESET 0x00000002
#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
/* PWM */
-#define GPIO27 PWM3 AF2 MFP_CFG(GPIO27, AF2)
+#define GPIO27_PWM3_AF2 MFP_CFG(GPIO27, AF2)
#define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2)
#define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2)
#define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2)
#include <mach/colibri.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
+#include <mach/audio.h>
#include "generic.h"
#include "devices.h"
static inline void colibri_pxa320_init_lcd(void) {}
#endif
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if defined(CONFIG_SND_AC97_CODEC) || \
+ defined(CONFIG_SND_AC97_CODEC_MODULE)
static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
GPIO34_AC97_SYSCLK,
GPIO35_AC97_SDATA_IN_0,
static const struct ads7846_platform_data tsc2046_info = {
.model = 7846,
.vref_delay_usecs = 100,
- .pressure_max = 512,
+ .pressure_max = 1024,
.debounce_max = 10,
.debounce_tol = 3,
.debounce_rep = 1,
beq 1001f
bic \irqstat, \irqstat, #0x80000000
mov \irqnr, \irqstat, lsr #16
+ add \irqnr, \irqnr, #(PXA_IRQ(0))
1001:
.endm
};
static struct platform_device rtc_device = {
- .name = "rtc0",
+ .name = "rtc-coh901331",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
#ifndef __ASM_PLAT_MFP_H
#define __ASM_PLAT_MFP_H
-#define mfp_to_gpio(m) ((m) % 128)
+#define mfp_to_gpio(m) ((m) % 256)
/* list of all the configurable MFP pins */
enum {
{
unsigned long val, flags;
- BUG_ON(mfp >= MFP_PIN_MAX);
+ BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
spin_lock_irqsave(&mfp_spin_lock, flags);
val = mfpr_readl(mfp_table[mfp].mfpr_off);
{
unsigned long flags;
- BUG_ON(mfp >= MFP_PIN_MAX);
+ BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
spin_lock_irqsave(&mfp_spin_lock, flags);
mfpr_writel(mfp_table[mfp].mfpr_off, val);
config MIPS
bool
default y
+ select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
static __init void prom_init_cmdline(void)
{
- char buf[CL_SIZE];
+ static char buf[CL_SIZE] __initdata;
/* Get the kernel command line from CFE */
if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Wed Mar 4 23:08:06 2009
+# Linux kernel version: 2.6.32-rc6
+# Sun Nov 8 22:59:47 2009
#
CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
+# CONFIG_NEC_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
# CONFIG_WR_PPMC is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_MACH_TXX9=y
CONFIG_TOSHIBA_RBTX4927=y
CONFIG_TOSHIBA_RBTX4938=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
CONFIG_CPU_BIG_ENDIAN=y
#
# CPU selection
#
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
+CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
#
#
# Power management options
#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
#
# Mapping drivers for chip access
#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
+CONFIG_MTD_RBTX4939=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_TXX9NDFMC=m
# CONFIG_MTD_ONENAND is not set
#
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NE2000=y
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_TXX9=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TX4939=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# SPI Protocol Masters
#
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_TXX9ACLC=m
+CONFIG_HAS_TXX9_ACLC=y
+CONFIG_SND_SOC_TXX9ACLC_AC97=m
+CONFIG_SND_SOC_TXX9ACLC_GENERIC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# LED drivers
#
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_TX4939=y
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_TXX9_DMAC=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_GENERIC_ACL=y
#
+# Caches
+#
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_HFSPLUS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#include <asm/scatterlist.h>
#include <asm/cache.h>
+#include <asm-generic/dma-coherent.h>
void *dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag);
extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction);
-#if 0
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-
-extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
- dma_addr_t device_addr, size_t size, int flags);
-extern void dma_release_declared_memory(struct device *dev);
-extern void * dma_mark_declared_memory_occupied(struct device *dev,
- dma_addr_t device_addr, size_t size);
-#endif
-
#endif /* _ASM_DMA_MAPPING_H */
unsigned int mtflags;
int cpu;
struct clock_event_device *cd;
- unsigned long nextstamp = 0L;
+ unsigned long nextstamp;
unsigned long reference;
repeat:
+ nextstamp = 0L;
for_each_online_cpu(cpu) {
/*
* Find virtual CPUs within the current VPE who have
/*
* In the Linux kernel, we support selection of FPR format on the
- * basis of the Status.FR bit. This does imply that, if a full 32
- * FPRs are desired, there needs to be a flip-flop that can be written
- * to one at that bit position. In any case, O32 MIPS ABI uses
- * only the even FPRs (Status.FR = 0).
+ * basis of the Status.FR bit. If an FPU is not present, the FR bit
+ * is hardwired to zero, which would imply a 32-bit FPU even for
+ * 64-bit CPUs. For 64-bit kernels with no FPU we use TIF_32BIT_REGS
+ * as a proxy for the FR bit so that a 64-bit FPU is emulated. In any
+ * case, for a 32-bit kernel which uses the O32 MIPS ABI, only the
+ * even FPRs are used (Status.FR = 0).
*/
-
-#define CP0_STATUS_FR_SUPPORT
-
-#ifdef CP0_STATUS_FR_SUPPORT
-#define FR_BIT ST0_FR
+static inline int cop1_64bit(struct pt_regs *xcp)
+{
+ if (cpu_has_fpu)
+ return xcp->cp0_status & ST0_FR;
+#ifdef CONFIG_64BIT
+ return !test_thread_flag(TIF_32BIT_REGS);
#else
-#define FR_BIT 0
+ return 0;
#endif
+}
+
+#define SIFROMREG(si, x) ((si) = cop1_64bit(xcp) || !(x & 1) ? \
+ (int)ctx->fpr[x] : (int)(ctx->fpr[x & ~1] >> 32))
-#define SIFROMREG(si, x) ((si) = \
- (xcp->cp0_status & FR_BIT) || !(x & 1) ? \
- (int)ctx->fpr[x] : \
- (int)(ctx->fpr[x & ~1] >> 32 ))
-#define SITOREG(si, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] = \
- (xcp->cp0_status & FR_BIT) || !(x & 1) ? \
+#define SITOREG(si, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = \
+ cop1_64bit(xcp) || !(x & 1) ? \
ctx->fpr[x & ~1] >> 32 << 32 | (u32)(si) : \
ctx->fpr[x & ~1] << 32 >> 32 | (u64)(si) << 32)
-#define DIFROMREG(di, x) ((di) = \
- ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)])
-#define DITOREG(di, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] \
- = (di))
+#define DIFROMREG(di, x) ((di) = ctx->fpr[x & ~(cop1_64bit(xcp) == 0)])
+#define DITOREG(di, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = (di))
#define SPFROMREG(sp, x) SIFROMREG((sp).bits, x)
#define SPTOREG(sp, x) SITOREG((sp).bits, x)
{
void *ret;
+ if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+ return ret;
+
gfp = massage_gfp_flags(dev, gfp);
ret = (void *) __get_free_pages(gfp, get_order(size));
dma_addr_t dma_handle)
{
unsigned long addr = (unsigned long) vaddr;
+ int order = get_order(size);
+
+ if (dma_release_from_coherent(dev, order, vaddr))
+ return;
plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
{
char *memsize_str;
unsigned int memsize;
- char cmdline[CL_SIZE], *ptr;
+ char *ptr;
+ static char cmdline[CL_SIZE] __initdata;
/* otherwise look in the environment */
memsize_str = prom_getenv("memsize");
void __init prom_setup_cmdline(void)
{
- char cmd_line[CL_SIZE];
+ static char cmd_line[CL_SIZE] __initdata;
char *cp, *board;
int prom_argc;
char **prom_argv, **prom_envp;
int argc;
int *argv32;
int i; /* Always ignore the "-c" at argv[0] */
- char builtin[CL_SIZE];
+ static char builtin[CL_SIZE] __initdata;
if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
/*
static void __init preprocess_cmdline(void)
{
- char cmdline[CL_SIZE];
+ static char cmdline[CL_SIZE] __initdata;
char *s;
strcpy(cmdline, arcs_cmdline);
#define F_SETOWN 12 /* for sockets. */
#define F_SETSIG 13 /* for sockets. */
#define F_GETSIG 14 /* for sockets. */
-#define F_GETOWN_EX 15
-#define F_SETOWN_EX 16
/* for posix fcntl() and lockf() */
#define F_RDLCK 01
return 64;
}
-void get4k(FILE *file, char *buf )
+static void get4k(FILE *file, char *buf )
{
unsigned j;
unsigned num = fread(buf, 1, 4096, file);
buf[j] = 0;
}
-void put4k(FILE *file, char *buf )
+static void put4k(FILE *file, char *buf )
{
fwrite(buf, 1, 4096, file);
}
-void death(const char *msg, FILE *fdesc, const char *fname)
+static void death(const char *msg, FILE *fdesc, const char *fname)
{
fprintf(stderr, msg);
fclose(fdesc);
disabled_wait(0);
sched_clock_base_cc = TOD_UNIX_EPOCH;
+ S390_lowcore.last_update_clock = sched_clock_base_cc;
}
#ifdef CONFIG_SHARED_KERNEL
return;
}
+ /* re-initialize cputime accounting. */
+ sched_clock_base_cc = get_clock();
+ S390_lowcore.last_update_clock = sched_clock_base_cc;
+ S390_lowcore.last_update_timer = 0x7fffffffffffffffULL;
+ S390_lowcore.user_timer = 0;
+ S390_lowcore.system_timer = 0;
+ asm volatile("SPT 0(%0)" : : "a" (&S390_lowcore.last_update_timer));
+
/* re-setup boot command line with new ipl vm parms */
ipl_update_parameters();
setup_boot_command_line();
lh %r7,0x8a # get svc number from lowcore
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
TRACE_IRQS_OFF
- l %r1,__TI_task(%r9)
- mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
- mvc __THREAD_per+__PER_address(4,%r1),__LC_PER_ADDRESS
- mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
+ l %r8,__TI_task(%r9)
+ mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID
+ mvc __THREAD_per+__PER_address(4,%r8),__LC_PER_ADDRESS
+ mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- lg %r1,__TI_task(%r9)
- mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
- mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS
- mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
+ lg %r8,__TI_task(%r9)
+ mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID
+ mvc __THREAD_per+__PER_address(8,%r8),__LC_PER_ADDRESS
+ mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
}
static struct irq_chip imask_irq_chip = {
- .typename = "SR.IMASK",
+ .name = "SR.IMASK",
.mask = mask_imask_irq,
.unmask = unmask_imask_irq,
.mask_ack = mask_imask_irq,
static void end_intc_irq(unsigned int irq);
static struct irq_chip intc_irq_type = {
- .typename = "INTC",
+ .name = "INTC",
.startup = startup_intc_irq,
.shutdown = shutdown_intc_irq,
.enable = enable_intc_irq,
unsigned long lastfrelno;
btfixup *lastf;
-void fatal(void) __attribute__((noreturn));
-void fatal(void)
+static void fatal(void) __attribute__((noreturn));
+static void fatal(void)
{
fprintf(stderr, "Malformed output from objdump\n%s\n", buffer);
exit(1);
}
-btfixup *find(int type, char *name)
+static btfixup *find(int type, char *name)
{
int i;
for (i = 0; i < last; i++) {
return array + last - 1;
}
-void set_mode (char *buffer)
+static void set_mode (char *buffer)
{
for (mode = 0;; mode++)
if (buffer[mode] < '0' || buffer[mode] > '9')
* as PROM looks for a.out image only.
*/
-unsigned short ld2(char *p)
+static unsigned short ld2(char *p)
{
return (p[0] << 8) | p[1];
}
-unsigned int ld4(char *p)
+static unsigned int ld4(char *p)
{
return (p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3];
}
-void st4(char *p, unsigned int x)
+static void st4(char *p, unsigned int x)
{
p[0] = x >> 24;
p[1] = x >> 16;
p[3] = x;
}
-void usage(void)
+static void usage(void)
{
/* fs_img.gz is an image of initial ramdisk. */
fprintf(stderr, "Usage: piggyback vmlinux.aout System.map fs_img.gz\n");
exit(1);
}
-void die(char *str)
+static void die(char *str)
{
perror (str);
exit(1);
/* Note: run this on an a.out kernel (use elftoaout for it), as PROM looks for a.out image onlly
usage: piggyback vmlinux System.map tail, where tail is gzipped fs of the initial ramdisk */
-void die(char *str)
+static void die(char *str)
{
perror (str);
exit(1);
btusb_stop_traffic(data);
err = usb_autopm_get_interface(data->intf);
if (err < 0)
- return 0;
+ goto failed;
data->intf->needs_remote_wakeup = 0;
usb_autopm_put_interface(data->intf);
+failed:
+ usb_scuttle_anchored_urbs(&data->deferred);
return 0;
}
the port has just hung up or is in another error state */
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
+ /* Indicate we are open */
+ if (tty->termios->c_cflag & CBAUD)
+ tty_port_raise_dtr_rts(port);
port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
char *gpu_prefix;
};
-struct offset *offset_new(unsigned o)
+static struct offset *offset_new(unsigned o)
{
struct offset *offset;
return offset;
}
-void table_offset_add(struct table *t, struct offset *offset)
+static void table_offset_add(struct table *t, struct offset *offset)
{
list_add_tail(&offset->list, &t->offsets);
}
-void table_init(struct table *t)
+static void table_init(struct table *t)
{
INIT_LIST_HEAD(&t->offsets);
t->offset_max = 0;
t->table = NULL;
}
-void table_print(struct table *t)
+static void table_print(struct table *t)
{
unsigned nlloop, i, j, n, c, id;
printf("};\n");
}
-int table_build(struct table *t)
+static int table_build(struct table *t)
{
struct offset *offset;
unsigned i, m;
}
static char gpu_name[10];
-int parser_auth(struct table *t, const char *filename)
+static int parser_auth(struct table *t, const char *filename)
{
FILE *file;
regex_t mask_rex;
case FAULT:
/* Note - only for remote1 and remote2 */
- out = data->alarms & (sattr->index ? 0x8000 : 0x4000);
- out = out ? 0 : 1;
+ out = !!(data->alarms & (sattr->index ? 0x8000 : 0x4000));
break;
default:
set_pwmfreq, INPUT, 0);
static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
set_pwmctrl, INPUT, 0);
-static SENSOR_DEVICE_ATTR_2(pwm1_auto_channel_temp, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR,
show_pwmchan, set_pwmchan, INPUT, 0);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MIN, 0);
set_pwmfreq, INPUT, 1);
static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
set_pwmctrl, INPUT, 1);
-static SENSOR_DEVICE_ATTR_2(pwm2_auto_channel_temp, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR,
show_pwmchan, set_pwmchan, INPUT, 1);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MIN, 1);
set_pwmfreq, INPUT, 2);
static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
set_pwmctrl, INPUT, 2);
-static SENSOR_DEVICE_ATTR_2(pwm3_auto_channel_temp, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR,
show_pwmchan, set_pwmchan, INPUT, 2);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MIN, 2);
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
- &sensor_dev_attr_pwm1_auto_channel_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_pwm2_freq.dev_attr.attr,
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
- &sensor_dev_attr_pwm2_auto_channel_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3.dev_attr.attr,
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
- &sensor_dev_attr_pwm3_auto_channel_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
NULL,
}
/* Limits and settings, should never change update every 60 seconds */
- if (time_after(jiffies, data->limits_updated + HZ * 2) ||
+ if (time_after(jiffies, data->limits_updated + HZ * 60) ||
!data->valid) {
data->config5 = adt7475_read(REG_CONFIG5);
}
for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
- if (!pdata->in[i])
+ struct s3c24xx_adc_hwmon_incfg *cfg = pdata->in[i];
+
+ if (!cfg)
continue;
- if (pdata->in[i]->mult >= 0x10000)
+ if (cfg->mult >= 0x10000)
dev_warn(&dev->dev,
"channel %d multiplier too large\n",
i);
+ if (cfg->divider == 0) {
+ dev_err(&dev->dev, "channel %d divider zero\n", i);
+ continue;
+ }
+
ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i],
&hwmon->attrs[i], i);
if (ret) {
dev->ff = ff;
dev->flush = flush_effects;
dev->event = input_ff_event;
- set_bit(EV_FF, dev->evbit);
+ __set_bit(EV_FF, dev->evbit);
/* Copy "true" bits into ff device bitmap */
for (i = 0; i <= FF_MAX; i++)
if (test_bit(i, dev->ffbit))
- set_bit(i, ff->ffbit);
+ __set_bit(i, ff->ffbit);
/* we can emulate RUMBLE with periodic effects */
if (test_bit(FF_PERIODIC, ff->ffbit))
- set_bit(FF_RUMBLE, dev->ffbit);
+ __set_bit(FF_RUMBLE, dev->ffbit);
return 0;
}
*/
void input_ff_destroy(struct input_dev *dev)
{
- clear_bit(EV_FF, dev->evbit);
- if (dev->ff) {
- if (dev->ff->destroy)
- dev->ff->destroy(dev->ff);
- kfree(dev->ff->private);
- kfree(dev->ff);
+ struct ff_device *ff = dev->ff;
+
+ __clear_bit(EV_FF, dev->evbit);
+ if (ff) {
+ if (ff->destroy)
+ ff->destroy(ff);
+ kfree(ff->private);
+ kfree(ff);
dev->ff = NULL;
}
}
struct ml_effect_state states[FF_MEMLESS_EFFECTS];
int gain;
struct timer_list timer;
- spinlock_t timer_lock;
struct input_dev *dev;
int (*play_effect)(struct input_dev *dev, void *data,
{
struct input_dev *dev = (struct input_dev *)timer_data;
struct ml_device *ml = dev->ff->private;
+ unsigned long flags;
debug("timer: updating effects");
- spin_lock(&ml->timer_lock);
+ spin_lock_irqsave(&dev->event_lock, flags);
ml_play_effects(ml);
- spin_unlock(&ml->timer_lock);
+ spin_unlock_irqrestore(&dev->event_lock, flags);
}
+/*
+ * Sets requested gain for FF effects. Called with dev->event_lock held.
+ */
static void ml_ff_set_gain(struct input_dev *dev, u16 gain)
{
struct ml_device *ml = dev->ff->private;
int i;
- spin_lock_bh(&ml->timer_lock);
-
ml->gain = gain;
for (i = 0; i < FF_MEMLESS_EFFECTS; i++)
__clear_bit(FF_EFFECT_PLAYING, &ml->states[i].flags);
ml_play_effects(ml);
-
- spin_unlock_bh(&ml->timer_lock);
}
+/*
+ * Start/stop specified FF effect. Called with dev->event_lock held.
+ */
static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
{
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect_id];
- unsigned long flags;
-
- spin_lock_irqsave(&ml->timer_lock, flags);
if (value > 0) {
debug("initiated play");
ml_play_effects(ml);
}
- spin_unlock_irqrestore(&ml->timer_lock, flags);
-
return 0;
}
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect->id];
- spin_lock_bh(&ml->timer_lock);
+ spin_lock_irq(&dev->event_lock);
if (test_bit(FF_EFFECT_STARTED, &state->flags)) {
__clear_bit(FF_EFFECT_PLAYING, &state->flags);
ml_schedule_timer(ml);
}
- spin_unlock_bh(&ml->timer_lock);
+ spin_unlock_irq(&dev->event_lock);
return 0;
}
ml->private = data;
ml->play_effect = play_effect;
ml->gain = 0xffff;
- spin_lock_init(&ml->timer_lock);
setup_timer(&ml->timer, ml_effect_timer, (unsigned long)dev);
set_bit(FF_GAIN, dev->ffbit);
return 0;
}
-#define INPUT_DO_TOGGLE(dev, type, bits, on) \
- do { \
- int i; \
- if (!test_bit(EV_##type, dev->evbit)) \
- break; \
- for (i = 0; i < type##_MAX; i++) { \
- if (!test_bit(i, dev->bits##bit) || \
- !test_bit(i, dev->bits)) \
- continue; \
- dev->event(dev, EV_##type, i, on); \
- } \
+#define INPUT_DO_TOGGLE(dev, type, bits, on) \
+ do { \
+ int i; \
+ bool active; \
+ \
+ if (!test_bit(EV_##type, dev->evbit)) \
+ break; \
+ \
+ for (i = 0; i < type##_MAX; i++) { \
+ if (!test_bit(i, dev->bits##bit)) \
+ continue; \
+ \
+ active = test_bit(i, dev->bits); \
+ if (!active && !on) \
+ continue; \
+ \
+ dev->event(dev, EV_##type, i, on ? active : 0); \
+ } \
} while (0)
#ifdef CONFIG_PM
return -1;
atkbd_activate(atkbd);
+
+ /*
+ * Restore LED state and repeat rate. While input core
+ * will do this for us at resume time reconnect may happen
+ * because user requested it via sysfs or simply because
+ * keyboard was unplugged and plugged in again so we need
+ * to do it ourselves here.
+ */
+ atkbd_set_leds(atkbd);
+ if (!atkbd->softrepeat)
+ atkbd_set_repeat_rate(atkbd);
+
}
atkbd_enable(atkbd);
atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
+ atkbd_reset_state(atkbd);
atkbd_activate(atkbd);
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "CF-72"),
},
- .callback = lifebook_set_serio_phys,
- .driver_data = "isa0060/serio3",
+ .callback = lifebook_set_6byte_proto,
},
{
.ident = "Lifebook B142",
static int psmouse_extensions(struct psmouse *psmouse,
unsigned int max_proto, bool set_properties)
{
- bool synaptics_hardware = true;
+ bool synaptics_hardware = false;
/*
* We always check for lifebook because it does not disturb mouse
{
int type = *((unsigned int *)kp->arg);
- return sprintf(buffer, "%s\n", psmouse_protocol_by_type(type)->name);
+ return sprintf(buffer, "%s", psmouse_protocol_by_type(type)->name);
}
static int __init psmouse_init(void)
if (err) {
printk(KERN_ERR "error registering embedded driver: "
"%x\n", err);
- return -err;
+ return err;
}
HFC_cnt++;
printk(KERN_INFO "%d devices registered\n", HFC_cnt);
int sz = ISDN_MAX_CHANNELS*sizeof(ippp_bundle);
if( (isdn_ppp_bundle_arr = kzalloc(sz, GFP_KERNEL)) == NULL )
return -ENOMEM;
- for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
+ for( i = 0; i < ISDN_MAX_CHANNELS; i++ )
spin_lock_init(&isdn_ppp_bundle_arr[i].lock);
- skb_queue_head_init(&isdn_ppp_bundle_arr[i].frags);
- }
return 0;
}
if ((lp->netdev->pb = isdn_ppp_mp_bundle_alloc()) == NULL)
return -ENOMEM;
lp->next = lp->last = lp; /* nobody else in a queue */
- skb_queue_head_init(&lp->netdev->pb->frags);
+ lp->netdev->pb->frags = NULL;
lp->netdev->pb->frames = 0;
lp->netdev->pb->seq = UINT_MAX;
}
static u32 isdn_ppp_mp_get_seq( int short_seq,
struct sk_buff * skb, u32 last_seq );
-static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from,
- struct sk_buff *to);
-static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp,
- struct sk_buff *from, struct sk_buff *to,
- u32 lastseq);
-static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb);
+static struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp,
+ struct sk_buff * from, struct sk_buff * to );
+static void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp,
+ struct sk_buff * from, struct sk_buff * to );
+static void isdn_ppp_mp_free_skb( ippp_bundle * mp, struct sk_buff * skb );
static void isdn_ppp_mp_print_recv_pkt( int slot, struct sk_buff * skb );
static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp,
- struct sk_buff *skb)
+ struct sk_buff *skb)
{
- struct sk_buff *newfrag, *frag, *start, *nextf;
- u32 newseq, minseq, thisseq;
- isdn_mppp_stats *stats;
struct ippp_struct *is;
+ isdn_net_local * lpq;
+ ippp_bundle * mp;
+ isdn_mppp_stats * stats;
+ struct sk_buff * newfrag, * frag, * start, *nextf;
+ u32 newseq, minseq, thisseq;
unsigned long flags;
- isdn_net_local *lpq;
- ippp_bundle *mp;
int slot;
spin_lock_irqsave(&net_dev->pb->lock, flags);
- mp = net_dev->pb;
- stats = &mp->stats;
+ mp = net_dev->pb;
+ stats = &mp->stats;
slot = lp->ppp_slot;
if (slot < 0 || slot >= ISDN_MAX_CHANNELS) {
printk(KERN_ERR "%s: lp->ppp_slot(%d)\n",
return;
}
is = ippp_table[slot];
- if (++mp->frames > stats->max_queue_len)
+ if( ++mp->frames > stats->max_queue_len )
stats->max_queue_len = mp->frames;
-
+
if (is->debug & 0x8)
isdn_ppp_mp_print_recv_pkt(lp->ppp_slot, skb);
- newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ,
- skb, is->last_link_seqno);
+ newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ,
+ skb, is->last_link_seqno);
+
/* if this packet seq # is less than last already processed one,
* toss it right away, but check for sequence start case first
*/
- if (mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT)) {
+ if( mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT) ) {
mp->seq = newseq; /* the first packet: required for
* rfc1990 non-compliant clients --
* prevents constant packet toss */
spin_unlock_irqrestore(&mp->lock, flags);
return;
}
-
+
/* find the minimum received sequence number over all links */
is->last_link_seqno = minseq = newseq;
for (lpq = net_dev->queue;;) {
* packets */
newfrag = skb;
- /* Insert new fragment into the proper sequence slot. */
- skb_queue_walk(&mp->frags, frag) {
- if (MP_SEQ(frag) == newseq) {
- isdn_ppp_mp_free_skb(mp, newfrag);
- newfrag = NULL;
- break;
- }
- if (MP_LT(newseq, MP_SEQ(frag))) {
- __skb_queue_before(&mp->frags, frag, newfrag);
- newfrag = NULL;
- break;
- }
- }
- if (newfrag)
- __skb_queue_tail(&mp->frags, newfrag);
+ /* if this new fragment is before the first one, then enqueue it now. */
+ if ((frag = mp->frags) == NULL || MP_LT(newseq, MP_SEQ(frag))) {
+ newfrag->next = frag;
+ mp->frags = frag = newfrag;
+ newfrag = NULL;
+ }
- frag = skb_peek(&mp->frags);
- start = ((MP_FLAGS(frag) & MP_BEGIN_FRAG) &&
- (MP_SEQ(frag) == mp->seq)) ? frag : NULL;
- if (!start)
- goto check_overflow;
+ start = MP_FLAGS(frag) & MP_BEGIN_FRAG &&
+ MP_SEQ(frag) == mp->seq ? frag : NULL;
- /* main fragment traversing loop
+ /*
+ * main fragment traversing loop
*
* try to accomplish several tasks:
+ * - insert new fragment into the proper sequence slot (once that's done
+ * newfrag will be set to NULL)
* - reassemble any complete fragment sequence (non-null 'start'
* indicates there is a continguous sequence present)
* - discard any incomplete sequences that are below minseq -- due
* come to complete such sequence and it should be discarded
*
* loop completes when we accomplished the following tasks:
+ * - new fragment is inserted in the proper sequence ('newfrag' is
+ * set to NULL)
* - we hit a gap in the sequence, so no reassembly/processing is
* possible ('start' would be set to NULL)
*
* algorithm for this code is derived from code in the book
* 'PPP Design And Debugging' by James Carlson (Addison-Wesley)
*/
- skb_queue_walk_safe(&mp->frags, frag, nextf) {
- thisseq = MP_SEQ(frag);
-
- /* check for misplaced start */
- if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) {
- printk(KERN_WARNING"isdn_mppp(seq %d): new "
- "BEGIN flag with no prior END", thisseq);
- stats->seqerrs++;
- stats->frame_drops++;
- isdn_ppp_mp_discard(mp, start, frag);
- start = frag;
- } else if (MP_LE(thisseq, minseq)) {
- if (MP_FLAGS(frag) & MP_BEGIN_FRAG)
+ while (start != NULL || newfrag != NULL) {
+
+ thisseq = MP_SEQ(frag);
+ nextf = frag->next;
+
+ /* drop any duplicate fragments */
+ if (newfrag != NULL && thisseq == newseq) {
+ isdn_ppp_mp_free_skb(mp, newfrag);
+ newfrag = NULL;
+ }
+
+ /* insert new fragment before next element if possible. */
+ if (newfrag != NULL && (nextf == NULL ||
+ MP_LT(newseq, MP_SEQ(nextf)))) {
+ newfrag->next = nextf;
+ frag->next = nextf = newfrag;
+ newfrag = NULL;
+ }
+
+ if (start != NULL) {
+ /* check for misplaced start */
+ if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) {
+ printk(KERN_WARNING"isdn_mppp(seq %d): new "
+ "BEGIN flag with no prior END", thisseq);
+ stats->seqerrs++;
+ stats->frame_drops++;
+ start = isdn_ppp_mp_discard(mp, start,frag);
+ nextf = frag->next;
+ }
+ } else if (MP_LE(thisseq, minseq)) {
+ if (MP_FLAGS(frag) & MP_BEGIN_FRAG)
start = frag;
- else {
+ else {
if (MP_FLAGS(frag) & MP_END_FRAG)
- stats->frame_drops++;
- __skb_unlink(skb, &mp->frags);
+ stats->frame_drops++;
+ if( mp->frags == frag )
+ mp->frags = nextf;
isdn_ppp_mp_free_skb(mp, frag);
+ frag = nextf;
continue;
- }
+ }
}
-
- /* if we have end fragment, then we have full reassembly
- * sequence -- reassemble and process packet now
+
+ /* if start is non-null and we have end fragment, then
+ * we have full reassembly sequence -- reassemble
+ * and process packet now
*/
- if (MP_FLAGS(frag) & MP_END_FRAG) {
- minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK;
- /* Reassemble the packet then dispatch it */
- isdn_ppp_mp_reassembly(net_dev, lp, start, frag, thisseq);
+ if (start != NULL && (MP_FLAGS(frag) & MP_END_FRAG)) {
+ minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK;
+ /* Reassemble the packet then dispatch it */
+ isdn_ppp_mp_reassembly(net_dev, lp, start, nextf);
+
+ start = NULL;
+ frag = NULL;
- start = NULL;
- frag = NULL;
- }
+ mp->frags = nextf;
+ }
/* check if need to update start pointer: if we just
* reassembled the packet and sequence is contiguous
* below low watermark and set start to the next frag or
* clear start ptr.
*/
- if (nextf != (struct sk_buff *)&mp->frags &&
+ if (nextf != NULL &&
((thisseq+1) & MP_LONGSEQ_MASK) == MP_SEQ(nextf)) {
- /* if we just reassembled and the next one is here,
- * then start another reassembly.
- */
- if (frag == NULL) {
+ /* if we just reassembled and the next one is here,
+ * then start another reassembly. */
+
+ if (frag == NULL) {
if (MP_FLAGS(nextf) & MP_BEGIN_FRAG)
- start = nextf;
- else {
- printk(KERN_WARNING"isdn_mppp(seq %d):"
- " END flag with no following "
- "BEGIN", thisseq);
+ start = nextf;
+ else
+ {
+ printk(KERN_WARNING"isdn_mppp(seq %d):"
+ " END flag with no following "
+ "BEGIN", thisseq);
stats->seqerrs++;
}
}
- } else {
- if (nextf != (struct sk_buff *)&mp->frags &&
- frag != NULL &&
- MP_LT(thisseq, minseq)) {
+
+ } else {
+ if ( nextf != NULL && frag != NULL &&
+ MP_LT(thisseq, minseq)) {
/* we've got a break in the sequence
* and we not at the end yet
* and we did not just reassembled
* discard all the frames below low watermark
* and start over */
stats->frame_drops++;
- isdn_ppp_mp_discard(mp, start, nextf);
+ mp->frags = isdn_ppp_mp_discard(mp,start,nextf);
}
/* break in the sequence, no reassembly */
- start = NULL;
- }
- if (!start)
- break;
- }
-
-check_overflow:
+ start = NULL;
+ }
+
+ frag = nextf;
+ } /* while -- main loop */
+
+ if (mp->frags == NULL)
+ mp->frags = frag;
+
/* rather straighforward way to deal with (not very) possible
- * queue overflow
- */
+ * queue overflow */
if (mp->frames > MP_MAX_QUEUE_LEN) {
stats->overflows++;
- skb_queue_walk_safe(&mp->frags, frag, nextf) {
- if (mp->frames <= MP_MAX_QUEUE_LEN)
- break;
- __skb_unlink(frag, &mp->frags);
- isdn_ppp_mp_free_skb(mp, frag);
+ while (mp->frames > MP_MAX_QUEUE_LEN) {
+ frag = mp->frags->next;
+ isdn_ppp_mp_free_skb(mp, mp->frags);
+ mp->frags = frag;
}
}
spin_unlock_irqrestore(&mp->lock, flags);
}
-static void isdn_ppp_mp_cleanup(isdn_net_local *lp)
+static void isdn_ppp_mp_cleanup( isdn_net_local * lp )
{
- struct sk_buff *skb, *tmp;
-
- skb_queue_walk_safe(&lp->netdev->pb->frags, skb, tmp) {
- __skb_unlink(skb, &lp->netdev->pb->frags);
- isdn_ppp_mp_free_skb(lp->netdev->pb, skb);
- }
+ struct sk_buff * frag = lp->netdev->pb->frags;
+ struct sk_buff * nextfrag;
+ while( frag ) {
+ nextfrag = frag->next;
+ isdn_ppp_mp_free_skb(lp->netdev->pb, frag);
+ frag = nextfrag;
+ }
+ lp->netdev->pb->frags = NULL;
}
static u32 isdn_ppp_mp_get_seq( int short_seq,
return seq;
}
-static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from,
- struct sk_buff *to)
+struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp,
+ struct sk_buff * from, struct sk_buff * to )
{
- if (from) {
- struct sk_buff *skb, *tmp;
- int freeing = 0;
-
- skb_queue_walk_safe(&mp->frags, skb, tmp) {
- if (skb == to)
- break;
- if (skb == from)
- freeing = 1;
- if (!freeing)
- continue;
- __skb_unlink(skb, &mp->frags);
- isdn_ppp_mp_free_skb(mp, skb);
+ if( from )
+ while (from != to) {
+ struct sk_buff * next = from->next;
+ isdn_ppp_mp_free_skb(mp, from);
+ from = next;
}
- }
-}
-
-static unsigned int calc_tot_len(struct sk_buff_head *queue,
- struct sk_buff *from, struct sk_buff *to)
-{
- unsigned int tot_len = 0;
- struct sk_buff *skb;
- int found_start = 0;
-
- skb_queue_walk(queue, skb) {
- if (skb == from)
- found_start = 1;
- if (!found_start)
- continue;
- tot_len += skb->len - MP_HEADER_LEN;
- if (skb == to)
- break;
- }
- return tot_len;
+ return from;
}
-/* Reassemble packet using fragments in the reassembly queue from
- * 'from' until 'to', inclusive.
- */
-static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp,
- struct sk_buff *from, struct sk_buff *to,
- u32 lastseq)
+void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp,
+ struct sk_buff * from, struct sk_buff * to )
{
- ippp_bundle *mp = net_dev->pb;
- unsigned int tot_len;
- struct sk_buff *skb;
+ ippp_bundle * mp = net_dev->pb;
int proto;
+ struct sk_buff * skb;
+ unsigned int tot_len;
if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) {
printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n",
__func__, lp->ppp_slot);
return;
}
-
- tot_len = calc_tot_len(&mp->frags, from, to);
-
- if (MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG)) {
- if (ippp_table[lp->ppp_slot]->debug & 0x40)
+ if( MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG) ) {
+ if( ippp_table[lp->ppp_slot]->debug & 0x40 )
printk(KERN_DEBUG "isdn_mppp: reassembly: frame %d, "
- "len %d\n", MP_SEQ(from), from->len);
+ "len %d\n", MP_SEQ(from), from->len );
skb = from;
skb_pull(skb, MP_HEADER_LEN);
- __skb_unlink(skb, &mp->frags);
mp->frames--;
} else {
- struct sk_buff *walk, *tmp;
- int found_start = 0;
+ struct sk_buff * frag;
+ int n;
- if (ippp_table[lp->ppp_slot]->debug & 0x40)
- printk(KERN_DEBUG"isdn_mppp: reassembling frames %d "
- "to %d, len %d\n", MP_SEQ(from), lastseq,
- tot_len);
+ for(tot_len=n=0, frag=from; frag != to; frag=frag->next, n++)
+ tot_len += frag->len - MP_HEADER_LEN;
- skb = dev_alloc_skb(tot_len);
- if (!skb)
+ if( ippp_table[lp->ppp_slot]->debug & 0x40 )
+ printk(KERN_DEBUG"isdn_mppp: reassembling frames %d "
+ "to %d, len %d\n", MP_SEQ(from),
+ (MP_SEQ(from)+n-1) & MP_LONGSEQ_MASK, tot_len );
+ if( (skb = dev_alloc_skb(tot_len)) == NULL ) {
printk(KERN_ERR "isdn_mppp: cannot allocate sk buff "
- "of size %d\n", tot_len);
-
- found_start = 0;
- skb_queue_walk_safe(&mp->frags, walk, tmp) {
- if (walk == from)
- found_start = 1;
- if (!found_start)
- continue;
+ "of size %d\n", tot_len);
+ isdn_ppp_mp_discard(mp, from, to);
+ return;
+ }
- if (skb) {
- unsigned int len = walk->len - MP_HEADER_LEN;
- skb_copy_from_linear_data_offset(walk, MP_HEADER_LEN,
- skb_put(skb, len),
- len);
- }
- __skb_unlink(walk, &mp->frags);
- isdn_ppp_mp_free_skb(mp, walk);
+ while( from != to ) {
+ unsigned int len = from->len - MP_HEADER_LEN;
- if (walk == to)
- break;
+ skb_copy_from_linear_data_offset(from, MP_HEADER_LEN,
+ skb_put(skb,len),
+ len);
+ frag = from->next;
+ isdn_ppp_mp_free_skb(mp, from);
+ from = frag;
}
}
- if (!skb)
- return;
-
proto = isdn_ppp_strip_proto(skb);
isdn_ppp_push_higher(net_dev, lp, skb, proto);
}
-static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb)
+static void isdn_ppp_mp_free_skb(ippp_bundle * mp, struct sk_buff * skb)
{
dev_kfree_skb(skb);
mp->frames--;
{
int ret, state;
+ led_dat->gpio = -1;
+
/* skip leds that aren't available */
if (!gpio_is_valid(template->gpio)) {
printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n",
desc->raid_disk < mddev->raid_disks */) {
set_bit(In_sync, &rdev->flags);
rdev->raid_disk = desc->raid_disk;
+ } else if (desc->state & (1<<MD_DISK_ACTIVE)) {
+ /* active but not in sync implies recovery up to
+ * reshape position. We don't know exactly where
+ * that is, so set to zero for now */
+ if (mddev->minor_version >= 91) {
+ rdev->recovery_offset = 0;
+ rdev->raid_disk = desc->raid_disk;
+ }
}
if (desc->state & (1<<MD_DISK_WRITEMOSTLY))
set_bit(WriteMostly, &rdev->flags);
list_for_each_entry(rdev2, &mddev->disks, same_set) {
mdp_disk_t *d;
int desc_nr;
- if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags)
- && !test_bit(Faulty, &rdev2->flags))
+ int is_active = test_bit(In_sync, &rdev2->flags);
+
+ if (rdev2->raid_disk >= 0 &&
+ sb->minor_version >= 91)
+ /* we have nowhere to store the recovery_offset,
+ * but if it is not below the reshape_position,
+ * we can piggy-back on that.
+ */
+ is_active = 1;
+ if (rdev2->raid_disk < 0 ||
+ test_bit(Faulty, &rdev2->flags))
+ is_active = 0;
+ if (is_active)
desc_nr = rdev2->raid_disk;
else
desc_nr = next_spare++;
d->number = rdev2->desc_nr;
d->major = MAJOR(rdev2->bdev->bd_dev);
d->minor = MINOR(rdev2->bdev->bd_dev);
- if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags)
- && !test_bit(Faulty, &rdev2->flags))
+ if (is_active)
d->raid_disk = rdev2->raid_disk;
else
d->raid_disk = rdev2->desc_nr; /* compatibility */
if (test_bit(Faulty, &rdev2->flags))
d->state = (1<<MD_DISK_FAULTY);
- else if (test_bit(In_sync, &rdev2->flags)) {
+ else if (is_active) {
d->state = (1<<MD_DISK_ACTIVE);
- d->state |= (1<<MD_DISK_SYNC);
+ if (test_bit(In_sync, &rdev2->flags))
+ d->state |= (1<<MD_DISK_SYNC);
active++;
working++;
} else {
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags)) {
- if (mddev->curr_resync_completed > rdev->recovery_offset)
- rdev->recovery_offset = mddev->curr_resync_completed;
if (rdev->recovery_offset > 0) {
sb->feature_map |=
cpu_to_le32(MD_FEATURE_RECOVERY_OFFSET);
*/
mdk_rdev_t *rdev;
+ /* First make sure individual recovery_offsets are correct */
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (rdev->raid_disk >= 0 &&
+ !test_bit(In_sync, &rdev->flags) &&
+ mddev->curr_resync_completed > rdev->recovery_offset)
+ rdev->recovery_offset = mddev->curr_resync_completed;
+
+ }
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (rdev->sb_events == mddev->events ||
(nospares &&
return ERR_PTR(-ENOMEM);
}
+
+static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded)
+{
+ switch (algo) {
+ case ALGORITHM_PARITY_0:
+ if (raid_disk < max_degraded)
+ return 1;
+ break;
+ case ALGORITHM_PARITY_N:
+ if (raid_disk >= raid_disks - max_degraded)
+ return 1;
+ break;
+ case ALGORITHM_PARITY_0_6:
+ if (raid_disk == 0 ||
+ raid_disk == raid_disks - 1)
+ return 1;
+ break;
+ case ALGORITHM_LEFT_ASYMMETRIC_6:
+ case ALGORITHM_RIGHT_ASYMMETRIC_6:
+ case ALGORITHM_LEFT_SYMMETRIC_6:
+ case ALGORITHM_RIGHT_SYMMETRIC_6:
+ if (raid_disk == raid_disks - 1)
+ return 1;
+ }
+ return 0;
+}
+
static int run(mddev_t *mddev)
{
raid5_conf_t *conf;
int working_disks = 0, chunk_size;
+ int dirty_parity_disks = 0;
mdk_rdev_t *rdev;
+ sector_t reshape_offset = 0;
if (mddev->recovery_cp != MaxSector)
printk(KERN_NOTICE "raid5: %s is not clean"
"on a stripe boundary\n");
return -EINVAL;
}
+ reshape_offset = here_new * mddev->new_chunk_sectors;
/* here_new is the stripe we will write to */
here_old = mddev->reshape_position;
sector_div(here_old, mddev->chunk_sectors *
/*
* 0 for a fully functional array, 1 or 2 for a degraded array.
*/
- list_for_each_entry(rdev, &mddev->disks, same_set)
- if (rdev->raid_disk >= 0 &&
- test_bit(In_sync, &rdev->flags))
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (rdev->raid_disk < 0)
+ continue;
+ if (test_bit(In_sync, &rdev->flags))
working_disks++;
+ /* This disc is not fully in-sync. However if it
+ * just stored parity (beyond the recovery_offset),
+ * when we don't need to be concerned about the
+ * array being dirty.
+ * When reshape goes 'backwards', we never have
+ * partially completed devices, so we only need
+ * to worry about reshape going forwards.
+ */
+ /* Hack because v0.91 doesn't store recovery_offset properly. */
+ if (mddev->major_version == 0 &&
+ mddev->minor_version > 90)
+ rdev->recovery_offset = reshape_offset;
+
+ printk("%d: w=%d pa=%d pr=%d m=%d a=%d r=%d op1=%d op2=%d\n",
+ rdev->raid_disk, working_disks, conf->prev_algo,
+ conf->previous_raid_disks, conf->max_degraded,
+ conf->algorithm, conf->raid_disks,
+ only_parity(rdev->raid_disk,
+ conf->prev_algo,
+ conf->previous_raid_disks,
+ conf->max_degraded),
+ only_parity(rdev->raid_disk,
+ conf->algorithm,
+ conf->raid_disks,
+ conf->max_degraded));
+ if (rdev->recovery_offset < reshape_offset) {
+ /* We need to check old and new layout */
+ if (!only_parity(rdev->raid_disk,
+ conf->algorithm,
+ conf->raid_disks,
+ conf->max_degraded))
+ continue;
+ }
+ if (!only_parity(rdev->raid_disk,
+ conf->prev_algo,
+ conf->previous_raid_disks,
+ conf->max_degraded))
+ continue;
+ dirty_parity_disks++;
+ }
mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks)
- working_disks);
mddev->dev_sectors &= ~(mddev->chunk_sectors - 1);
mddev->resync_max_sectors = mddev->dev_sectors;
- if (mddev->degraded > 0 &&
+ if (mddev->degraded > dirty_parity_disks &&
mddev->recovery_cp != MaxSector) {
if (mddev->ok_start_degraded)
printk(KERN_WARNING
!test_bit(Faulty, &rdev->flags)) {
if (raid5_add_disk(mddev, rdev) == 0) {
char nm[20];
- set_bit(In_sync, &rdev->flags);
+ if (rdev->raid_disk >= conf->previous_raid_disks)
+ set_bit(In_sync, &rdev->flags);
+ else
+ rdev->recovery_offset = 0;
added_devices++;
- rdev->recovery_offset = 0;
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
&rdev->kobj, nm))
}
subdev->mtd->owner = THIS_MODULE;
- printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %dMiB, "
- "%d-bit\n", phys, subdev->mtd->size >> 20,
+ printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %uMiB, %d-bit\n",
+ phys, (unsigned)(subdev->mtd->size >> 20),
subdev->map.bankwidth * 8);
return 0;
arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
If unsure, say Y.
-config CAN_SJA1000
- depends on CAN_DEV && HAS_IOMEM
- tristate "Philips SJA1000"
- ---help---
- Driver for the SJA1000 CAN controllers from Philips or NXP
-
-config CAN_SJA1000_ISA
- depends on CAN_SJA1000 && ISA
- tristate "ISA Bus based legacy SJA1000 driver"
- ---help---
- This driver adds legacy support for SJA1000 chips connected to
- the ISA bus using I/O port, memory mapped or indirect access.
-
-config CAN_SJA1000_PLATFORM
- depends on CAN_SJA1000
- tristate "Generic Platform Bus based SJA1000 driver"
- ---help---
- This driver adds support for the SJA1000 chips connected to
- the "platform bus" (Linux abstraction for directly to the
- processor attached devices). Which can be found on various
- boards from Phytec (http://www.phytec.de) like the PCM027,
- PCM038.
-
-config CAN_SJA1000_OF_PLATFORM
- depends on CAN_SJA1000 && PPC_OF
- tristate "Generic OF Platform Bus based SJA1000 driver"
- ---help---
- This driver adds support for the SJA1000 chips connected to
- the OpenFirmware "platform bus" found on embedded systems with
- OpenFirmware bindings, e.g. if you have a PowerPC based system
- you may want to enable this option.
-
-config CAN_EMS_PCI
- tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
- depends on PCI && CAN_SJA1000
- ---help---
- This driver is for the one, two or four channel CPC-PCI,
- CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
- (http://www.ems-wuensche.de).
-
-config CAN_EMS_USB
- tristate "EMS CPC-USB/ARM7 CAN/USB interface"
- depends on USB && CAN_DEV
- ---help---
- This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
- from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
-
-config CAN_KVASER_PCI
- tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
- depends on PCI && CAN_SJA1000
- ---help---
- This driver is for the the PCIcanx and PCIcan cards (1, 2 or
- 4 channel) from Kvaser (http://www.kvaser.com).
-
config CAN_AT91
tristate "Atmel AT91 onchip CAN controller"
- depends on CAN && CAN_DEV && ARCH_AT91SAM9263
+ depends on CAN_DEV && ARCH_AT91SAM9263
---help---
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
+source "drivers/net/can/sja1000/Kconfig"
+
+source "drivers/net/can/usb/Kconfig"
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN
return -EMSGSIZE;
}
+static size_t can_get_xstats_size(const struct net_device *dev)
+{
+ return sizeof(struct can_device_stats);
+}
+
static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
{
struct can_priv *priv = netdev_priv(dev);
.changelink = can_changelink,
.get_size = can_get_size,
.fill_info = can_fill_info,
+ .get_xstats_size = can_get_xstats_size,
.fill_xstats = can_fill_xstats,
};
--- /dev/null
+menuconfig CAN_SJA1000
+ tristate "Philips/NXP SJA1000 devices"
+ depends on CAN_DEV && HAS_IOMEM
+
+if CAN_SJA1000
+
+config CAN_SJA1000_ISA
+ tristate "ISA Bus based legacy SJA1000 driver"
+ depends on ISA
+ ---help---
+ This driver adds legacy support for SJA1000 chips connected to
+ the ISA bus using I/O port, memory mapped or indirect access.
+
+config CAN_SJA1000_PLATFORM
+ tristate "Generic Platform Bus based SJA1000 driver"
+ ---help---
+ This driver adds support for the SJA1000 chips connected to
+ the "platform bus" (Linux abstraction for directly to the
+ processor attached devices). Which can be found on various
+ boards from Phytec (http://www.phytec.de) like the PCM027,
+ PCM038.
+
+config CAN_SJA1000_OF_PLATFORM
+ tristate "Generic OF Platform Bus based SJA1000 driver"
+ depends on PPC_OF
+ ---help---
+ This driver adds support for the SJA1000 chips connected to
+ the OpenFirmware "platform bus" found on embedded systems with
+ OpenFirmware bindings, e.g. if you have a PowerPC based system
+ you may want to enable this option.
+
+config CAN_EMS_PCI
+ tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
+ depends on PCI
+ ---help---
+ This driver is for the one, two or four channel CPC-PCI,
+ CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
+ (http://www.ems-wuensche.de).
+
+config CAN_KVASER_PCI
+ tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+ depends on PCI
+ ---help---
+ This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+ 4 channel) from Kvaser (http://www.kvaser.com).
+
+endif
--- /dev/null
+menu "CAN USB interfaces"
+ depends on USB && CAN_DEV
+
+config CAN_EMS_USB
+ tristate "EMS CPC-USB/ARM7 CAN/USB interface"
+ ---help---
+ This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+ from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+endmenu
#
obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len,
PCI_DMA_FROMDEVICE);
(*sd->pg_chunk.p_cnt)--;
- if (!*sd->pg_chunk.p_cnt)
+ if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
pci_unmap_page(adap->pdev,
sd->pg_chunk.mapping,
fl->alloc_size,
PCI_DMA_FROMDEVICE);
(*sd->pg_chunk.p_cnt)--;
- if (!*sd->pg_chunk.p_cnt)
+ if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
pci_unmap_page(adap->pdev,
sd->pg_chunk.mapping,
fl->alloc_size,
u32 status = 0;
u32 num_pkts = 0;
- if (!netif_running(ndev))
- return 0;
-
/* Check interrupt vectors and call packet processing */
status = emac_read(EMAC_MACINVECTOR);
dev->dev_addr);
dev_printk(KERN_ERR, &pci_dev->dev,
"Please complain to your hardware vendor. Switching to a random MAC.\n");
- dev->dev_addr[0] = 0x00;
- dev->dev_addr[1] = 0x00;
- dev->dev_addr[2] = 0x6c;
- get_random_bytes(&dev->dev_addr[3], 3);
+ random_ether_addr(dev->dev_addr);
}
dprintk(KERN_DEBUG "%s: MAC Address %pM\n",
/* EMACx_TRTR */
-#define EMAC_TRTR_SHIFT_EMAC4 27
-#define EMAC_TRTR_SHIFT 24
+#define EMAC_TRTR_SHIFT_EMAC4 24
+#define EMAC_TRTR_SHIFT 27
/* EMAC specific TX descriptor control fields (write access) */
#define EMAC_TX_CTRL_GFCS 0x0200
} else {
pci_set_master(pdev);
pci_restore_state(pdev);
+ pci_save_state(pdev);
pci_wake_from_d3(pdev, false);
return NULL;
}
-static void __devinit mdio_gpio_bus_deinit(struct device *dev)
+static void mdio_gpio_bus_deinit(struct device *dev)
{
struct mii_bus *bus = dev_get_drvdata(dev);
struct mdio_gpio_info *bitbang = bus->priv;
}
/* Pull completed packets off the queue and receive them. */
- while ((skb = ppp_mp_reconstruct(ppp)))
- ppp_receive_nonmp_frame(ppp, skb);
+ while ((skb = ppp_mp_reconstruct(ppp))) {
+ if (pskb_may_pull(skb, 2))
+ ppp_receive_nonmp_frame(ppp, skb);
+ else {
+ ++ppp->dev->stats.rx_length_errors;
+ kfree_skb(skb);
+ ppp_receive_error(ppp);
+ }
+ }
return;
int bar = 0;
u16 *adrp;
- printk(KERN_INFO "%s\n", version);
+ printk("%s\n", version);
err = pci_enable_device(pdev);
if (err)
static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
struct net_device *dev)
{
- unsigned int mtu = dev->mtu;
+ unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
- tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE;
+ tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE;
}
static int rtl8169_open(struct net_device *dev)
/* Restore the PCI state saved during initialization. */
pci_restore_state(sp->pdev);
+ pci_save_state(sp->pdev);
pci_read_config_word(sp->pdev, 0x2, &val16);
if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
break;
struct net_device *dev = pdata->dev;
int npackets = 0;
- while (likely(netif_running(dev)) && (npackets < budget)) {
+ while (npackets < budget) {
unsigned int pktlength;
unsigned int pktwords;
struct sk_buff *skb;
mif_cfg &= ~MIF_CFG_PSELECT;
writel(mif_cfg, gp->regs + MIF_CFG);
} else {
- gp->phy_type = phy_serialink;
+#ifdef CONFIG_SPARC
+ const char *p;
+
+ p = of_get_property(gp->of_node, "shared-pins", NULL);
+ if (p && !strcmp(p, "serdes"))
+ gp->phy_type = phy_serdes;
+ else
+#endif
+ gp->phy_type = phy_serialink;
}
if (gp->phy_type == phy_mii_mdio1 ||
gp->phy_type == phy_mii_mdio0) {
/* configure operational mode */
ath5k_hw_set_opmode(ah);
- ath5k_hw_set_mcast_filter(ah, 0, 0);
ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
}
{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) },
/* E-machines E510 (tuliom@gmail.com) */
{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) },
+ /* BenQ Joybook R55v (nowymarluk@wp.pl) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) },
/* Acer Extensa 5620z (nekoreeve@gmail.com) */
{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
/* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */
{ ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) },
/* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */
{ ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) },
+ /* HP Compaq CQ60-206US (ddreggors@jumptv.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) },
/* HP Compaq C700 (nitrousnrg@gmail.com) */
{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
/* IBM-specific AR5212 (all others) */
{
struct b43_wl *wl = hw_to_b43_wl(hw);
- mutex_lock(&wl->mutex);
+ /* FIXME: add locking */
b43_update_templates(wl);
- mutex_unlock(&wl->mutex);
return 0;
}
struct ipw2100_priv *priv;
struct net_device *dev;
- dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0);
+ dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
if (!dev)
return NULL;
priv = libipw_priv(dev);
sysfs_remove_group(&pci_dev->dev.kobj,
&ipw2100_attribute_group);
- free_ieee80211(dev, 0);
+ free_ieee80211(dev);
pci_set_drvdata(pci_dev, NULL);
}
if (dev->base_addr)
iounmap((void __iomem *)dev->base_addr);
- free_ieee80211(dev, 0);
+ free_ieee80211(dev);
}
pci_release_regions(pci_dev);
static int rtap_iface = 0; /* def: 0 -- do not create rtap interface */
#endif
-static struct ieee80211_rate ipw2200_rates[] = {
- { .bitrate = 10 },
- { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 60 },
- { .bitrate = 90 },
- { .bitrate = 120 },
- { .bitrate = 180 },
- { .bitrate = 240 },
- { .bitrate = 360 },
- { .bitrate = 480 },
- { .bitrate = 540 }
-};
-
-#define ipw2200_a_rates (ipw2200_rates + 4)
-#define ipw2200_num_a_rates 8
-#define ipw2200_bg_rates (ipw2200_rates + 0)
-#define ipw2200_num_bg_rates 12
#ifdef CONFIG_IPW2200_QOS
static int qos_enable = 0;
*
*/
+static int ipw_wx_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = libipw_priv(dev);
+ mutex_lock(&priv->mutex);
+ if (priv->status & STATUS_RF_KILL_MASK)
+ strcpy(wrqu->name, "radio off");
+ else if (!(priv->status & STATUS_ASSOCIATED))
+ strcpy(wrqu->name, "unassociated");
+ else
+ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c",
+ ipw_modes[priv->assoc_request.ieee_mode]);
+ IPW_DEBUG_WX("Name: %s\n", wrqu->name);
+ mutex_unlock(&priv->mutex);
+ return 0;
+}
+
static int ipw_set_channel(struct ipw_priv *priv, u8 channel)
{
if (channel == 0) {
/* Rebase the WE IOCTLs to zero for the handler array */
#define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT]
static iw_handler ipw_wx_handlers[] = {
- IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname,
+ IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name,
IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq,
IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq,
IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode,
/* Called by register_netdev() */
static int ipw_net_init(struct net_device *dev)
{
- int i, rc = 0;
struct ipw_priv *priv = libipw_priv(dev);
- const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
- struct wireless_dev *wdev = &priv->ieee->wdev;
mutex_lock(&priv->mutex);
if (ipw_up(priv)) {
- rc = -EIO;
- goto out;
- }
-
- memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
-
- /* fill-out priv->ieee->bg_band */
- if (geo->bg_channels) {
- struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
-
- bg_band->band = IEEE80211_BAND_2GHZ;
- bg_band->n_channels = geo->bg_channels;
- bg_band->channels =
- kzalloc(geo->bg_channels *
- sizeof(struct ieee80211_channel), GFP_KERNEL);
- /* translate geo->bg to bg_band.channels */
- for (i = 0; i < geo->bg_channels; i++) {
- bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
- bg_band->channels[i].center_freq = geo->bg[i].freq;
- bg_band->channels[i].hw_value = geo->bg[i].channel;
- bg_band->channels[i].max_power = geo->bg[i].max_power;
- if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
- bg_band->channels[i].flags |=
- IEEE80211_CHAN_PASSIVE_SCAN;
- if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
- bg_band->channels[i].flags |=
- IEEE80211_CHAN_NO_IBSS;
- if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
- bg_band->channels[i].flags |=
- IEEE80211_CHAN_RADAR;
- /* No equivalent for LIBIPW_CH_80211H_RULES,
- LIBIPW_CH_UNIFORM_SPREADING, or
- LIBIPW_CH_B_ONLY... */
- }
- /* point at bitrate info */
- bg_band->bitrates = ipw2200_bg_rates;
- bg_band->n_bitrates = ipw2200_num_bg_rates;
-
- wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
- }
-
- /* fill-out priv->ieee->a_band */
- if (geo->a_channels) {
- struct ieee80211_supported_band *a_band = &priv->ieee->a_band;
-
- a_band->band = IEEE80211_BAND_5GHZ;
- a_band->n_channels = geo->a_channels;
- a_band->channels =
- kzalloc(geo->a_channels *
- sizeof(struct ieee80211_channel), GFP_KERNEL);
- /* translate geo->bg to a_band.channels */
- for (i = 0; i < geo->a_channels; i++) {
- a_band->channels[i].band = IEEE80211_BAND_2GHZ;
- a_band->channels[i].center_freq = geo->a[i].freq;
- a_band->channels[i].hw_value = geo->a[i].channel;
- a_band->channels[i].max_power = geo->a[i].max_power;
- if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY)
- a_band->channels[i].flags |=
- IEEE80211_CHAN_PASSIVE_SCAN;
- if (geo->a[i].flags & LIBIPW_CH_NO_IBSS)
- a_band->channels[i].flags |=
- IEEE80211_CHAN_NO_IBSS;
- if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT)
- a_band->channels[i].flags |=
- IEEE80211_CHAN_RADAR;
- /* No equivalent for LIBIPW_CH_80211H_RULES,
- LIBIPW_CH_UNIFORM_SPREADING, or
- LIBIPW_CH_B_ONLY... */
- }
- /* point at bitrate info */
- a_band->bitrates = ipw2200_a_rates;
- a_band->n_bitrates = ipw2200_num_a_rates;
-
- wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band;
- }
-
- set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
-
- /* With that information in place, we can now register the wiphy... */
- if (wiphy_register(wdev->wiphy)) {
- rc = -EIO;
- goto out;
+ mutex_unlock(&priv->mutex);
+ return -EIO;
}
-out:
mutex_unlock(&priv->mutex);
- return rc;
+ return 0;
}
/* PCI driver stuff */
if (priv->prom_net_dev)
return -EPERM;
- priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1);
+ priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv));
if (priv->prom_net_dev == NULL)
return -ENOMEM;
rc = register_netdev(priv->prom_net_dev);
if (rc) {
- free_ieee80211(priv->prom_net_dev, 1);
+ free_ieee80211(priv->prom_net_dev);
priv->prom_net_dev = NULL;
return rc;
}
return;
unregister_netdev(priv->prom_net_dev);
- free_ieee80211(priv->prom_net_dev, 1);
+ free_ieee80211(priv->prom_net_dev);
priv->prom_net_dev = NULL;
}
struct ipw_priv *priv;
int i;
- net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0);
+ net_dev = alloc_ieee80211(sizeof(struct ipw_priv));
if (net_dev == NULL) {
err = -ENOMEM;
goto out;
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
out_free_ieee80211:
- free_ieee80211(priv->net_dev, 0);
+ free_ieee80211(priv->net_dev);
out:
return err;
}
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
- free_ieee80211(priv->net_dev, 0);
+ free_ieee80211(priv->net_dev);
free_firmware();
}
#include <linux/ieee80211.h>
#include <net/lib80211.h>
-#include <net/cfg80211.h>
#define LIBIPW_VERSION "git-1.1.13"
struct libipw_device {
struct net_device *dev;
- struct wireless_dev wdev;
struct libipw_security sec;
/* Bookkeeping structures */
struct libipw_stats ieee_stats;
struct libipw_geo geo;
- struct ieee80211_supported_band bg_band;
- struct ieee80211_supported_band a_band;
/* Probe / Beacon management */
struct list_head network_free_list;
}
/* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev, int monitor);
-extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
extern void libipw_networks_age(struct libipw_device *ieee,
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
-struct cfg80211_ops libipw_config_ops = { };
-void *libipw_wiphy_privid = &libipw_wiphy_privid;
-
static int libipw_networks_allocate(struct libipw_device *ieee)
{
if (ieee->networks)
}
EXPORT_SYMBOL(libipw_change_mtu);
-struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
+struct net_device *alloc_ieee80211(int sizeof_priv)
{
struct libipw_device *ieee;
struct net_device *dev;
ieee->dev = dev;
- if (!monitor) {
- ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0);
- if (!ieee->wdev.wiphy) {
- LIBIPW_ERROR("Unable to allocate wiphy.\n");
- goto failed_free_netdev;
- }
-
- ieee->dev->ieee80211_ptr = &ieee->wdev;
- ieee->wdev.iftype = NL80211_IFTYPE_STATION;
-
- /* Fill-out wiphy structure bits we know... Not enough info
- here to call set_wiphy_dev or set MAC address or channel info
- -- have to do that in ->ndo_init... */
- ieee->wdev.wiphy->privid = libipw_wiphy_privid;
-
- ieee->wdev.wiphy->max_scan_ssids = 1;
- ieee->wdev.wiphy->max_scan_ie_len = 0;
- ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION)
- | BIT(NL80211_IFTYPE_ADHOC);
- }
-
err = libipw_networks_allocate(ieee);
if (err) {
LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err);
- goto failed_free_wiphy;
+ goto failed_free_netdev;
}
libipw_networks_initialize(ieee);
return dev;
-failed_free_wiphy:
- if (!monitor)
- wiphy_free(ieee->wdev.wiphy);
failed_free_netdev:
free_netdev(dev);
failed:
return NULL;
}
-void free_ieee80211(struct net_device *dev, int monitor)
+void free_ieee80211(struct net_device *dev)
{
struct libipw_device *ieee = netdev_priv(dev);
lib80211_crypt_info_free(&ieee->crypt_info);
libipw_networks_free(ieee);
-
- /* free cfg80211 resources */
- if (!monitor) {
- wiphy_unregister(ieee->wdev.wiphy);
- kfree(ieee->a_band.channels);
- kfree(ieee->bg_band.channels);
- wiphy_free(ieee->wdev.wiphy);
- }
-
free_netdev(dev);
}
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
.shadow_ram_support = false,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
/*
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
struct iwl_cfg iwl6050_2agn_cfg = {
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
struct iwl_cfg iwl6000_3agn_cfg = {
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
struct iwl_cfg iwl6050_3agn_cfg = {
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
else if (tid == IWL_AGG_ALL_TID)
for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+ if (priv->cfg->use_rts_for_ht) {
+ /*
+ * switch to RTS/CTS if it is the prefer protection method
+ * for HT traffic
+ */
+ IWL_DEBUG_HT(priv, "use RTS/CTS protection for HT\n");
+ priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN;
+ iwlcore_commit_rxon(priv);
+ }
}
static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
/* always get timestamp with Rx frame */
priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
- /* allow CTS-to-self if possible. this is relevant only for
- * 5000, but will not damage 4965 */
- priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
ret = iwl_check_rxon_cmd(priv);
if (ret) {
"Could not send WEP static key.\n");
}
+ /*
+ * allow CTS-to-self if possible for new association.
+ * this is relevant only for 5000 series and up,
+ * but will not damage 4965
+ */
+ priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
+
/* Apply the new configuration
* RXON assoc doesn't clear the station table in uCode,
*/
* @pa_type: used by 6000 series only to identify the type of Power Amplifier
* @max_ll_items: max number of OTP blocks
* @shadow_ram_support: shadow support for OTP memory
+ * @use_rts_for_ht: use rts/cts protection for HT traffic
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
const bool shadow_ram_support;
const bool ht_greenfield_support;
const bool broken_powersave;
+ bool use_rts_for_ht;
};
/***************************
struct lbs_private *priv = dev->ml_priv;
uint32_t criteria = 0;
- if (priv->wol_criteria == 0xffffffff && wol->wolopts)
- return -EOPNOTSUPP;
-
if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY))
return -EOPNOTSUPP;
- if (wol->wolopts & WAKE_UCAST) criteria |= EHS_WAKE_ON_UNICAST_DATA;
- if (wol->wolopts & WAKE_MCAST) criteria |= EHS_WAKE_ON_MULTICAST_DATA;
- if (wol->wolopts & WAKE_BCAST) criteria |= EHS_WAKE_ON_BROADCAST_DATA;
- if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT;
+ if (wol->wolopts & WAKE_UCAST)
+ criteria |= EHS_WAKE_ON_UNICAST_DATA;
+ if (wol->wolopts & WAKE_MCAST)
+ criteria |= EHS_WAKE_ON_MULTICAST_DATA;
+ if (wol->wolopts & WAKE_BCAST)
+ criteria |= EHS_WAKE_ON_BROADCAST_DATA;
+ if (wol->wolopts & WAKE_PHY)
+ criteria |= EHS_WAKE_ON_MAC_EVENT;
+ if (wol->wolopts == 0)
+ criteria |= EHS_REMOVE_WAKEUP;
return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL);
}
static int p54u_firmware_reset_3887(struct ieee80211_hw *dev)
{
struct p54u_priv *priv = dev->priv;
- u8 buf[4];
+ u8 *buf;
int ret;
- memcpy(&buf, p54u_romboot_3887, sizeof(buf));
+ buf = kmalloc(4, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ memcpy(buf, p54u_romboot_3887, 4);
ret = p54u_bulk_msg(priv, P54U_PIPE_DATA,
- buf, sizeof(buf));
+ buf, 4);
+ kfree(buf);
if (ret)
dev_err(&priv->udev->dev, "(p54usb) unable to jump to "
"boot ROM (%d)!\n", ret);
#include <net/mac80211.h>
#include "rtl8187.h"
+#include "rtl8187_rfkill.h"
static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
{
int ret = 0;
drhd = (struct acpi_dmar_hardware_unit *)header;
- if (!drhd->address) {
- /* Promote an attitude of violence to a BIOS engineer today */
- WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n"
- "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR),
- dmi_get_system_info(DMI_BIOS_VERSION),
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- return -ENODEV;
- }
dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
if (!dmaru)
return -ENOMEM;
return 0;
}
+int __init check_zero_address(void)
+{
+ struct acpi_table_dmar *dmar;
+ struct acpi_dmar_header *entry_header;
+ struct acpi_dmar_hardware_unit *drhd;
+
+ dmar = (struct acpi_table_dmar *)dmar_tbl;
+ entry_header = (struct acpi_dmar_header *)(dmar + 1);
+
+ while (((unsigned long)entry_header) <
+ (((unsigned long)dmar) + dmar_tbl->length)) {
+ /* Avoid looping forever on bad ACPI tables */
+ if (entry_header->length == 0) {
+ printk(KERN_WARNING PREFIX
+ "Invalid 0-length structure\n");
+ return 0;
+ }
+
+ if (entry_header->type == ACPI_DMAR_TYPE_HARDWARE_UNIT) {
+ drhd = (void *)entry_header;
+ if (!drhd->address) {
+ /* Promote an attitude of violence to a BIOS engineer today */
+ WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n"
+ "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
+ dmi_get_system_info(DMI_BIOS_VENDOR),
+ dmi_get_system_info(DMI_BIOS_VERSION),
+ dmi_get_system_info(DMI_PRODUCT_VERSION));
+ return 0;
+ }
+ break;
+ }
+
+ entry_header = ((void *)entry_header + entry_header->length);
+ }
+ return 1;
+}
+
void __init detect_intel_iommu(void)
{
int ret;
ret = dmar_table_detect();
-
+ if (ret)
+ ret = check_zero_address();
{
#ifdef CONFIG_INTR_REMAP
struct acpi_table_dmar *dmar;
size = PAGE_ALIGN(size);
order = get_order(size);
- flags &= ~(GFP_DMA | GFP_DMA32);
+
+ if (!iommu_no_mapping(hwdev))
+ flags &= ~(GFP_DMA | GFP_DMA32);
+ else if (hwdev->coherent_dma_mask < dma_get_required_mask(hwdev)) {
+ if (hwdev->coherent_dma_mask < DMA_BIT_MASK(32))
+ flags |= GFP_DMA;
+ else
+ flags |= GFP_DMA32;
+ }
vaddr = (void *)__get_free_pages(flags, order);
if (!vaddr)
}
#endif /* CONFIG_PM */
+/*
+ * Here we only respond to action of unbound device from driver.
+ *
+ * Added device is not attached to its DMAR domain here yet. That will happen
+ * when mapping the device to iova.
+ */
+static int device_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct dmar_domain *domain;
+
+ domain = find_domain(pdev);
+ if (!domain)
+ return 0;
+
+ if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through)
+ domain_remove_one_dev_info(domain, pdev);
+
+ return 0;
+}
+
+static struct notifier_block device_nb = {
+ .notifier_call = device_notifier,
+};
+
int __init intel_iommu_init(void)
{
int ret = 0;
register_iommu(&intel_iommu_ops);
+ bus_register_notifier(&pci_bus_type, &device_nb);
+
return 0;
}
return -EIO;
/* are we the last user and permitted to disable ? */
- if (rdev->use_count == 1 && !rdev->constraints->always_on) {
+ if (rdev->use_count == 1 &&
+ (rdev->constraints && !rdev->constraints->always_on)) {
/* we are last user */
if (_regulator_can_change_status(rdev) &&
struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
regulator_unregister(drvdata->dev);
- kfree(drvdata->desc.name);
- kfree(drvdata);
-
if (gpio_is_valid(drvdata->gpio))
gpio_free(drvdata->gpio);
+ kfree(drvdata->desc.name);
+ kfree(drvdata);
return 0;
}
struct wm831x *wm831x = ldo->wm831x;
int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
- unsigned int ret;
+ int ret;
ret = wm831x_reg_read(wm831x, on_reg);
if (ret < 0)
- return 0;
+ return ret;
if (!(ret & WM831X_LDO1_ON_MODE))
return REGULATOR_MODE_NORMAL;
ret = wm831x_reg_read(wm831x, ctrl_reg);
if (ret < 0)
- return 0;
+ return ret;
if (ret & WM831X_LDO1_LP_MODE)
return REGULATOR_MODE_STANDBY;
clk_enable(rtap->clk);
/* Ack IRQ */
writel(1, rtap->virtbase + COH901331_IRQ_EVENT);
+ /*
+ * Disable the interrupt. This is necessary because
+ * the RTC lives on a lower-clocked line and will
+ * not release the IRQ line until after a few (slower)
+ * clock cycles. The interrupt will be re-enabled when
+ * a new alarm is set anyway.
+ */
+ writel(0, rtap->virtbase + COH901331_IRQ_MASK);
clk_disable(rtap->clk);
+
/* Set alarm flag */
rtc_update_irq(rtap->rtc, 1, RTC_AF);
else
writel(0, rtap->virtbase + COH901331_IRQ_MASK);
clk_disable(rtap->clk);
+
+ return 0;
}
static struct rtc_class_ops coh901331_ops = {
atomic_set(&monpriv->msglim_count, 0);
monpriv->write_index = 0;
monpriv->read_index = 0;
+ dev_set_drvdata(monreader_device, NULL);
for (i = 0; i < MON_MSGLIM; i++)
kfree(monpriv->msg_array[i]);
#include "sclp.h"
+static void (*old_machine_restart)(char *);
+static void (*old_machine_halt)(void);
+static void (*old_machine_power_off)(void);
+
/* Shutdown handler. Signal completion of shutdown by loading special PSW. */
-static void
-do_machine_quiesce(void)
+static void do_machine_quiesce(void)
{
psw_t quiesce_psw;
}
/* Handler for quiesce event. Start shutdown procedure. */
-static void
-sclp_quiesce_handler(struct evbuf_header *evbuf)
+static void sclp_quiesce_handler(struct evbuf_header *evbuf)
{
- _machine_restart = (void *) do_machine_quiesce;
- _machine_halt = do_machine_quiesce;
- _machine_power_off = do_machine_quiesce;
+ if (_machine_restart != (void *) do_machine_quiesce) {
+ old_machine_restart = _machine_restart;
+ old_machine_halt = _machine_halt;
+ old_machine_power_off = _machine_power_off;
+ _machine_restart = (void *) do_machine_quiesce;
+ _machine_halt = do_machine_quiesce;
+ _machine_power_off = do_machine_quiesce;
+ }
ctrl_alt_del();
}
+/* Undo machine restart/halt/power_off modification on resume */
+static void sclp_quiesce_pm_event(struct sclp_register *reg,
+ enum sclp_pm_event sclp_pm_event)
+{
+ switch (sclp_pm_event) {
+ case SCLP_PM_EVENT_RESTORE:
+ if (old_machine_restart) {
+ _machine_restart = old_machine_restart;
+ _machine_halt = old_machine_halt;
+ _machine_power_off = old_machine_power_off;
+ old_machine_restart = NULL;
+ old_machine_halt = NULL;
+ old_machine_power_off = NULL;
+ }
+ break;
+ case SCLP_PM_EVENT_FREEZE:
+ case SCLP_PM_EVENT_THAW:
+ break;
+ }
+}
+
static struct sclp_register sclp_quiesce_event = {
.receive_mask = EVTYP_SIGQUIESCE_MASK,
- .receiver_fn = sclp_quiesce_handler
+ .receiver_fn = sclp_quiesce_handler,
+ .pm_event_fn = sclp_quiesce_pm_event
};
/* Initialize quiesce driver. */
-static int __init
-sclp_quiesce_init(void)
+static int __init sclp_quiesce_init(void)
{
return sclp_register(&sclp_quiesce_event);
}
#define BFAD_FW_FILE_CT "ctfw.bin"
#define BFAD_FW_FILE_CB "cbfw.bin"
+MODULE_FIRMWARE(BFAD_FW_FILE_CT);
+MODULE_FIRMWARE(BFAD_FW_FILE_CB);
u32 *
bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
if (bfad_supported_fc4s & (BFA_PORT_ROLE_FCP_IM | BFA_PORT_ROLE_FCP_TM))
/* For FCP type 0x08 */
fc_host_supported_fc4s(host)[2] = 1;
- if (bfad_supported_fc4s | BFA_PORT_ROLE_FCP_IPFC)
+ if (bfad_supported_fc4s & BFA_PORT_ROLE_FCP_IPFC)
/* For LLC/SNAP type 0x05 */
fc_host_supported_fc4s(host)[3] = 0x20;
/* For fibre channel services type 0x20 */
eindex = handle;
estr->event_source = 0;
- if (eindex >= MAX_EVENTS) {
+ if (eindex < 0 || eindex >= MAX_EVENTS) {
spin_unlock_irqrestore(&ha->smp_lock, flags);
return eindex;
}
}
/**
+ * ipr_isr_eh - Interrupt service routine error handler
+ * @ioa_cfg: ioa config struct
+ * @msg: message to log
+ *
+ * Return value:
+ * none
+ **/
+static void ipr_isr_eh(struct ipr_ioa_cfg *ioa_cfg, char *msg)
+{
+ ioa_cfg->errors_logged++;
+ dev_err(&ioa_cfg->pdev->dev, "%s\n", msg);
+
+ if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
+ ioa_cfg->sdt_state = GET_DUMP;
+
+ ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
+}
+
+/**
* ipr_isr - Interrupt service routine
* @irq: irq number
* @devp: pointer to ioa config struct
volatile u32 int_reg, int_mask_reg;
u32 ioasc;
u16 cmd_index;
+ int num_hrrq = 0;
struct ipr_cmnd *ipr_cmd;
irqreturn_t rc = IRQ_NONE;
IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT;
if (unlikely(cmd_index >= IPR_NUM_CMD_BLKS)) {
- ioa_cfg->errors_logged++;
- dev_err(&ioa_cfg->pdev->dev, "Invalid response handle from IOA\n");
-
- if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
- ioa_cfg->sdt_state = GET_DUMP;
-
- ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
+ ipr_isr_eh(ioa_cfg, "Invalid response handle from IOA");
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return IRQ_HANDLED;
}
if (ipr_cmd != NULL) {
/* Clear the PCI interrupt */
- writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+ do {
+ writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+ } while (int_reg & IPR_PCII_HRRQ_UPDATED &&
+ num_hrrq++ < IPR_MAX_HRRQ_RETRIES);
+
+ if (int_reg & IPR_PCII_HRRQ_UPDATED) {
+ ipr_isr_eh(ioa_cfg, "Error clearing HRRQ");
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+ return IRQ_HANDLED;
+ }
+
} else
break;
}
#define IPR_IOA_MAX_SECTORS 32767
#define IPR_VSET_MAX_SECTORS 512
#define IPR_MAX_CDB_LEN 16
+#define IPR_MAX_HRRQ_RETRIES 3
#define IPR_DEFAULT_BUS_WIDTH 16
#define IPR_80MBs_SCSI_RATE ((80 * 10) / (IPR_DEFAULT_BUS_WIDTH / 8))
}
}
- res = 0;
}
return res;
ioarcb->data_transfer_length = cpu_to_le32(rcb_size);
- ioadl[0].flags |= cpu_to_le32(IOADL_FLAGS_READ_LAST);
+ ioadl[0].flags |= IOADL_FLAGS_READ_LAST;
ioadl[0].data_len = cpu_to_le32(rcb_size);
ioadl[0].address = cpu_to_le32(dma);
ioadl->address = cpu_to_le64(cmd->sense_buffer_dma);
ioadl->data_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE);
- ioadl->flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC);
+ ioadl->flags = IOADL_FLAGS_LAST_DESC;
/* request sense might be called as part of error response processing
* which runs in tasklets context. It is possible that mid-layer might
ioadl[i].flags = 0;
}
/* setup last descriptor */
- ioadl[i - 1].flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC);
+ ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC;
return 0;
}
}
/* setup the last descriptor */
- ioadl[i - 1].flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC);
+ ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC;
return 0;
}
cpu_to_le32(sizeof(struct pmcraid_config_table));
ioadl = &(ioarcb->add_data.u.ioadl[0]);
- ioadl->flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC);
+ ioadl->flags = IOADL_FLAGS_LAST_DESC;
ioadl->address = cpu_to_le64(pinstance->cfg_table_bus_addr);
ioadl->data_len = cpu_to_le32(sizeof(struct pmcraid_config_table));
fail_host_msg:
/* return the errno failure code as the only status */
BUG_ON(job->reply_len < sizeof(uint32_t));
+ job->reply->reply_payload_rcv_len = 0;
job->reply->result = ret;
job->reply_len = sizeof(uint32_t);
fc_bsg_jobdone(job);
fail_rport_msg:
/* return the errno failure code as the only status */
BUG_ON(job->reply_len < sizeof(uint32_t));
+ job->reply->reply_payload_rcv_len = 0;
job->reply->result = ret;
job->reply_len = sizeof(uint32_t);
fc_bsg_jobdone(job);
/* check if we have the msgcode value at least */
if (job->request_len < sizeof(uint32_t)) {
BUG_ON(job->reply_len < sizeof(uint32_t));
+ job->reply->reply_payload_rcv_len = 0;
job->reply->result = -ENOMSG;
job->reply_len = sizeof(uint32_t);
fc_bsg_jobdone(job);
wait_for_completion(&ss->done);
if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN))
- status = ETIMEDOUT;
+ status = -ETIMEDOUT;
if (!dma_buf)
dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir);
static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
u16 offset)
{
+ u32 lo, hi;
+
switch (bus->bustype) {
case SSB_BUSTYPE_SSB:
offset += current_coreidx * SSB_CORE_SIZE;
offset -= 0x800;
} else
ssb_pcmcia_switch_segment(bus, 0);
- break;
+ lo = readw(bus->mmio + offset);
+ hi = readw(bus->mmio + offset + 2);
+ return lo | (hi << 16);
case SSB_BUSTYPE_SDIO:
offset += current_coreidx * SSB_CORE_SIZE;
return ssb_sdio_scan_read32(bus, offset);
return 0;
bad1:
kfree(priv);
+ pm_runtime_disable(&pdev->dev);
bad0:
return ret;
}
acm->throttle = 0;
- tasklet_schedule(&acm->urb_task);
set_bit(ASYNCB_INITIALIZED, &acm->port.flags);
rv = tty_port_block_til_ready(&acm->port, tty, filp);
+ tasklet_schedule(&acm->urb_task);
done:
mutex_unlock(&acm->mutex);
err_out:
/* Perform the closing process and see if we need to do the hardware
shutdown */
- if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0)
+ if (!acm)
+ return;
+ if (tty_port_close_start(&acm->port, tty, filp) == 0) {
+ mutex_lock(&open_mutex);
+ if (!acm->dev) {
+ tty_port_tty_set(&acm->port, NULL);
+ acm_tty_unregister(acm);
+ tty->driver_data = NULL;
+ }
+ mutex_unlock(&open_mutex);
return;
+ }
acm_port_down(acm, 0);
tty_port_close_end(&acm->port, tty);
- mutex_lock(&open_mutex);
tty_port_tty_set(&acm->port, NULL);
- if (!acm->dev)
- acm_tty_unregister(acm);
- mutex_unlock(&open_mutex);
}
static int acm_tty_write(struct tty_struct *tty,
#ifdef CONFIG_PCI
static void quirk_amd_pll(int state);
static void amd_iso_dev_put(void);
+static void sb800_prefetch(struct ohci_hcd *ohci, int on);
#else
static inline void quirk_amd_pll(int state)
{
{
return;
}
+static inline void sb800_prefetch(struct ohci_hcd *ohci, int on)
+{
+ return;
+}
#endif
return 0;
pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+
+ /* SB800 needs pre-fetch fix */
+ if ((rev >= 0x40) && (rev <= 0x4f)) {
+ ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
+ ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
+ }
+
if ((rev > 0x3b) || (rev < 0x30)) {
pci_dev_put(amd_smbus_dev);
amd_smbus_dev = NULL;
}
+static void sb800_prefetch(struct ohci_hcd *ohci, int on)
+{
+ struct pci_dev *pdev;
+ u16 misc;
+
+ pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
+ pci_read_config_word(pdev, 0x50, &misc);
+ if (on == 0)
+ pci_write_config_word(pdev, 0x50, misc & 0xfcff);
+ else
+ pci_write_config_word(pdev, 0x50, misc | 0x0300);
+}
+
/* List of quirks for OHCI */
static const struct pci_device_id ohci_pci_quirks[] = {
{
switch (usb_pipetype (urb->pipe)) {
case PIPE_ISOCHRONOUS:
ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--;
- if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
- && quirk_amdiso(ohci))
- quirk_amd_pll(1);
+ if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
+ if (quirk_amdiso(ohci))
+ quirk_amd_pll(1);
+ if (quirk_amdprefetch(ohci))
+ sb800_prefetch(ohci, 0);
+ }
break;
case PIPE_INTERRUPT:
ohci_to_hcd(ohci)->self.bandwidth_int_reqs--;
data + urb->iso_frame_desc [cnt].offset,
urb->iso_frame_desc [cnt].length, urb, cnt);
}
- if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
- && quirk_amdiso(ohci))
- quirk_amd_pll(0);
+ if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
+ if (quirk_amdiso(ohci))
+ quirk_amd_pll(0);
+ if (quirk_amdprefetch(ohci))
+ sb800_prefetch(ohci, 1);
+ }
periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0
&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0;
break;
#define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */
#define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */
#define OHCI_QUIRK_AMD_ISO 0x200 /* ISO transfers*/
+#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */
// there are also chip quirks/bugs in init logic
struct work_struct nec_work; /* Worker for NEC quirk */
{
return ohci->flags & OHCI_QUIRK_AMD_ISO;
}
+static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
+{
+ return ohci->flags & OHCI_QUIRK_AMD_PREFETCH;
+}
#else
static inline int quirk_nec(struct ohci_hcd *ohci)
{
{
return 0;
}
+static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
+{
+ return 0;
+}
#endif
/* convert between an hcd pointer and the corresponding ohci_hcd */
int i;
/* Free the Event Ring Segment Table and the actual Event Ring */
- xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
+ if (xhci->ir_set) {
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
+ }
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
pci_free_consistent(pdev, size,
xhci->dcbaa, xhci->dcbaa->dma);
xhci->dcbaa = NULL;
+ scratchpad_free(xhci);
xhci->page_size = 0;
xhci->page_shift = 0;
- scratchpad_free(xhci);
}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
cur_seg = start_seg;
do {
+ if (start_dma == 0)
+ return 0;
/* We may get an event for a Link TRB in the middle of a TD */
end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
- &start_seg->trbs[TRBS_PER_SEGMENT - 1]);
+ &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
/* If the end TRB isn't in this segment, this is set to 0 */
end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
}
cur_seg = cur_seg->next;
start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
- } while (1);
+ } while (cur_seg != start_seg);
+ return 0;
}
/*
/*
* Return a few (kilo-)bytes to the head of the buffer.
- * This is used if a DMA fetch fails.
+ * This is used if a data fetch fails.
*/
static void mon_buff_area_shrink(struct mon_reader_bin *rp, unsigned int size)
{
- size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ /* size &= ~(PKT_ALIGN-1); -- we're called with aligned size */
rp->b_cnt -= size;
if (rp->b_in < size)
rp->b_in += rp->b_size;
unsigned int urb_length;
unsigned int offset;
unsigned int length;
+ unsigned int delta;
unsigned int ndesc, lendesc;
unsigned char dir;
struct mon_bin_hdr *ep;
if (length != 0) {
ep->flag_data = mon_bin_get_data(rp, offset, urb, length);
if (ep->flag_data != 0) { /* Yes, it's 0x00, not '0' */
- ep->len_cap = 0;
- mon_buff_area_shrink(rp, length);
+ delta = (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ ep->len_cap -= length;
+ delta -= (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ mon_buff_area_shrink(rp, delta);
}
} else {
ep->flag_data = data_tag;
static void cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_startup(struct usb_serial *);
static void cp210x_disconnect(struct usb_serial *);
+static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
+static int cp210x_carrier_raised(struct usb_serial_port *p);
static int debug;
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
.disconnect = cp210x_disconnect,
+ .dtr_rts = cp210x_dtr_rts,
+ .carrier_raised = cp210x_carrier_raised
};
/* Config request types */
return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
}
+static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
+{
+ if (on)
+ cp210x_tiocmset_port(p, NULL, TIOCM_DTR|TIOCM_RTS, 0);
+ else
+ cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS);
+}
+
static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
return result;
}
+static int cp210x_carrier_raised(struct usb_serial_port *p)
+{
+ unsigned int control;
+ cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1);
+ if (control & CONTROL_DCD)
+ return 1;
+ return 0;
+}
+
static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
#define DLINK_VENDOR_ID 0x1186
#define DLINK_PRODUCT_DWM_652 0x3e04
+#define DLINK_PRODUCT_DWM_652_U5 0xce16
#define QISDA_VENDOR_ID 0x1da5
#define QISDA_PRODUCT_H21_4512 0x4512
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
+ { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
if (corgibl_flags & CORGIBL_SUSPENDED)
intensity = 0;
- if (corgibl_flags & CORGIBL_BATTLOW)
- intensity &= lcd->limit_mask;
+
+ if ((corgibl_flags & CORGIBL_BATTLOW) && intensity > lcd->limit_mask)
+ intensity = lcd->limit_mask;
return corgi_bl_set_intensity(lcd, intensity);
}
static int lcd_register_fb(struct lcd_device *ld)
{
- memset(&ld->fb_notif, 0, sizeof(&ld->fb_notif));
+ memset(&ld->fb_notif, 0, sizeof(ld->fb_notif));
ld->fb_notif.notifier_call = fb_notifier_callback;
return fb_register_client(&ld->fb_notif);
}
if (i == ARRAY_SIZE(known_lcd_panels)) {
dev_err(&device->dev, "GLCD: No valid panel found\n");
- ret = ENODEV;
+ ret = -ENODEV;
goto err_clk_disable;
} else
dev_info(&device->dev, "GLCD: Found %s panel\n",
cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb)
{
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
- cifs_sb->mnt_cifs_flags &= CIFS_MOUNT_SERVER_INUM;
+ cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
cERROR(1, ("Autodisabling the use of server inode numbers on "
"%s. This server doesn't seem to support them "
"properly. Hardlinks will not be recognized on this "
type = PIDTYPE_PID;
break;
- case F_OWNER_GID:
+ case F_OWNER_PGRP:
type = PIDTYPE_PGID;
break;
break;
case PIDTYPE_PGID:
- owner.type = F_OWNER_GID;
+ owner.type = F_OWNER_PGRP;
break;
default:
p1 = encode_entry_baggage(cd, p1, name, namlen, ino);
if (plus)
- p = encode_entryplus_baggage(cd, p1, name, namlen);
+ p1 = encode_entryplus_baggage(cd, p1, name, namlen);
/* determine entry word length and lengths to go in pages */
num_entry_words = p1 - tmp;
* exclusive with a new mount job. Though it doesn't cover
* umount, it's enough for the purpose.
*/
- mutex_lock(&nilfs->ns_mount_mutex);
if (nilfs_checkpoint_is_mounted(nilfs, cno, 1)) {
/* Current implementation does not have to protect
plain read-only mounts since they are exclusive
ret = -EBUSY;
} else
ret = nilfs_cpfile_clear_snapshot(cpfile, cno);
- mutex_unlock(&nilfs->ns_mount_mutex);
return ret;
case NILFS_SNAPSHOT:
return nilfs_cpfile_set_snapshot(cpfile, cno);
int err;
spin_lock(&sbi->s_inode_lock);
- /* Caller of this function MUST lock s_inode_lock */
if (ii->i_bh == NULL) {
spin_unlock(&sbi->s_inode_lock);
err = nilfs_ifile_get_inode_block(sbi->s_ifile, inode->i_ino,
static int nilfs_ioctl_change_cpmode(struct inode *inode, struct file *filp,
unsigned int cmd, void __user *argp)
{
- struct inode *cpfile = NILFS_SB(inode->i_sb)->s_nilfs->ns_cpfile;
+ struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+ struct inode *cpfile = nilfs->ns_cpfile;
struct nilfs_transaction_info ti;
struct nilfs_cpmode cpmode;
int ret;
if (copy_from_user(&cpmode, argp, sizeof(cpmode)))
return -EFAULT;
+ mutex_lock(&nilfs->ns_mount_mutex);
nilfs_transaction_begin(inode->i_sb, &ti, 0);
ret = nilfs_cpfile_change_cpmode(
cpfile, cpmode.cm_cno, cpmode.cm_mode);
if (unlikely(ret < 0)) {
nilfs_transaction_abort(inode->i_sb);
+ mutex_unlock(&nilfs->ns_mount_mutex);
return ret;
}
nilfs_transaction_commit(inode->i_sb); /* never fails */
+ mutex_unlock(&nilfs->ns_mount_mutex);
return ret;
}
rsslim,
mm ? mm->start_code : 0,
mm ? mm->end_code : 0,
- (permitted) ? task->stack_start : 0,
+ (permitted && mm) ? task->stack_start : 0,
esp,
eip,
/* The signal information here is obsolete.
"XFS: NULL dquot in %s.", __func__);
goto next;
}
- if (item->ri_buf[i].i_len < sizeof(xfs_dqblk_t)) {
+ if (item->ri_buf[i].i_len < sizeof(xfs_disk_dquot_t)) {
cmn_err(CE_ALERT,
"XFS: dquot too small (%d) in %s.",
item->ri_buf[i].i_len, __func__);
"XFS: NULL dquot in %s.", __func__);
return XFS_ERROR(EIO);
}
- if (item->ri_buf[1].i_len < sizeof(xfs_dqblk_t)) {
+ if (item->ri_buf[1].i_len < sizeof(xfs_disk_dquot_t)) {
cmn_err(CE_ALERT,
"XFS: dquot too small (%d) in %s.",
item->ri_buf[1].i_len, __func__);
{
xfs_log_item_t *dlip = NULL;
xfs_log_item_t *mlip; /* ptr to minimum lip */
+ xfs_lsn_t tail_lsn;
mlip = xfs_ail_min(ailp);
if (mlip == dlip) {
mlip = xfs_ail_min(ailp);
+ /*
+ * It is not safe to access mlip after the AIL lock is
+ * dropped, so we must get a copy of li_lsn before we do
+ * so. This is especially important on 32-bit platforms
+ * where accessing and updating 64-bit values like li_lsn
+ * is not atomic.
+ */
+ tail_lsn = mlip->li_lsn;
spin_unlock(&ailp->xa_lock);
- xfs_log_move_tail(ailp->xa_mount, mlip->li_lsn);
+ xfs_log_move_tail(ailp->xa_mount, tail_lsn);
} else {
spin_unlock(&ailp->xa_lock);
}
{
xfs_log_item_t *dlip;
xfs_log_item_t *mlip;
+ xfs_lsn_t tail_lsn;
if (lip->li_flags & XFS_LI_IN_AIL) {
mlip = xfs_ail_min(ailp);
if (mlip == dlip) {
mlip = xfs_ail_min(ailp);
+ /*
+ * It is not safe to access mlip after the AIL lock
+ * is dropped, so we must get a copy of li_lsn
+ * before we do so. This is especially important
+ * on 32-bit platforms where accessing and updating
+ * 64-bit values like li_lsn is not atomic.
+ */
+ tail_lsn = mlip ? mlip->li_lsn : 0;
spin_unlock(&ailp->xa_lock);
- xfs_log_move_tail(ailp->xa_mount,
- (mlip ? mlip->li_lsn : 0));
+ xfs_log_move_tail(ailp->xa_mount, tail_lsn);
} else {
spin_unlock(&ailp->xa_lock);
}
#define F_OWNER_TID 0
#define F_OWNER_PID 1
-#define F_OWNER_GID 2
+#define F_OWNER_PGRP 2
struct f_owner_ex {
int type;
* methods; erase() is optional. set_gain() and set_autocenter() need
* only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER
* bits.
+ *
+ * Note that playback(), set_gain() and set_autocenter() are called with
+ * dev->event_lock spinlock held and interrupts off and thus may not
+ * sleep.
*/
struct ff_device {
int (*upload)(struct input_dev *dev, struct ff_effect *effect,
typedef struct {
int mp_mrru; /* unused */
- struct sk_buff_head frags; /* fragments sl list */
+ struct sk_buff * frags; /* fragments sl list -- use skb->next */
long frames; /* number of frames in the frame list */
unsigned int seq; /* last processed packet seq #: any packets
* with smaller seq # will be dropped
};
/**
- * struct nilfs_dat_group_desc - block group descriptor
- * @dg_nfrees: number of free virtual block numbers in block group
- */
-struct nilfs_dat_group_desc {
- __le32 dg_nfrees;
-};
-
-
-/**
* struct nilfs_snapshot_list - snapshot list
* @ssl_next: next checkpoint number on snapshot list
* @ssl_prev: previous checkpoint number on snapshot list
#define pm_notifier(fn, pri) do { (void)(fn); } while (0)
#endif /* !CONFIG_PM_SLEEP */
+extern struct mutex pm_mutex;
+
#ifndef CONFIG_HIBERNATION
static inline void register_nosave_region(unsigned long b, unsigned long e)
{
static inline void register_nosave_region_late(unsigned long b, unsigned long e)
{
}
-#endif
-extern struct mutex pm_mutex;
+static inline void lock_system_sleep(void) {}
+static inline void unlock_system_sleep(void) {}
+
+#else
+
+/* Let some subsystems like memory hotadd exclude hibernation */
+
+static inline void lock_system_sleep(void)
+{
+ mutex_lock(&pm_mutex);
+}
+
+static inline void unlock_system_sleep(void)
+{
+ mutex_unlock(&pm_mutex);
+}
+#endif
#endif /* _LINUX_SUSPEND_H */
void sctp_assoc_del_nonprimary_peers(struct sctp_association *,
struct sctp_transport *);
int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *,
- gfp_t);
+ sctp_scope_t, gfp_t);
int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *,
struct sctp_cookie*,
gfp_t gfp);
static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
{
- switch (target_type) {
- case 1:
- if (shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION)
- return target_type;
- case 2:
- if (shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION)
- return target_type;
- case 3:
- if (shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION)
- return target_type;
- }
+ static unsigned char cap[] = { 0,
+ SHOST_DIF_TYPE1_PROTECTION,
+ SHOST_DIF_TYPE2_PROTECTION,
+ SHOST_DIF_TYPE3_PROTECTION };
- return 0;
+ return shost->prot_capabilities & cap[target_type] ? target_type : 0;
}
static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
{
#if defined(CONFIG_BLK_DEV_INTEGRITY)
- switch (target_type) {
- case 0: return shost->prot_capabilities & SHOST_DIX_TYPE0_PROTECTION;
- case 1: return shost->prot_capabilities & SHOST_DIX_TYPE1_PROTECTION;
- case 2: return shost->prot_capabilities & SHOST_DIX_TYPE2_PROTECTION;
- case 3: return shost->prot_capabilities & SHOST_DIX_TYPE3_PROTECTION;
- }
+ static unsigned char cap[] = { SHOST_DIX_TYPE0_PROTECTION,
+ SHOST_DIX_TYPE1_PROTECTION,
+ SHOST_DIX_TYPE2_PROTECTION,
+ SHOST_DIX_TYPE3_PROTECTION };
+
+ return shost->prot_capabilities & cap[target_type];
#endif
return 0;
}
if (!works)
return -ENOMEM;
+ get_online_cpus();
+
/*
- * when running in keventd don't schedule a work item on itself.
- * Can just call directly because the work queue is already bound.
- * This also is faster.
- * Make this a generic parameter for other workqueues?
+ * When running in keventd don't schedule a work item on
+ * itself. Can just call directly because the work queue is
+ * already bound. This also is faster.
*/
- if (current_is_keventd()) {
+ if (current_is_keventd())
orig = raw_smp_processor_id();
- INIT_WORK(per_cpu_ptr(works, orig), func);
- func(per_cpu_ptr(works, orig));
- }
- get_online_cpus();
for_each_online_cpu(cpu) {
struct work_struct *work = per_cpu_ptr(works, cpu);
- if (cpu == orig)
- continue;
INIT_WORK(work, func);
- schedule_work_on(cpu, work);
- }
- for_each_online_cpu(cpu) {
if (cpu != orig)
- flush_work(per_cpu_ptr(works, cpu));
+ schedule_work_on(cpu, work);
}
+ if (orig >= 0)
+ func(per_cpu_ptr(works, orig));
+
+ for_each_online_cpu(cpu)
+ flush_work(per_cpu_ptr(works, cpu));
+
put_online_cpus();
free_percpu(works);
return 0;
config MEMORY_HOTPLUG
bool "Allow for memory hot-add"
depends on SPARSEMEM || X86_64_ACPI_NUMA
- depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG
+ depends on HOTPLUG && ARCH_ENABLE_MEMORY_HOTPLUG
depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390)
-comment "Memory hotplug is currently incompatible with Software Suspend"
- depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390
-
config MEMORY_HOTPLUG_SPARSE
def_bool y
depends on SPARSEMEM && MEMORY_HOTPLUG
#include <linux/migrate.h>
#include <linux/page-isolation.h>
#include <linux/pfn.h>
+#include <linux/suspend.h>
#include <asm/tlbflush.h>
}
#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
-static pg_data_t *hotadd_new_pgdat(int nid, u64 start)
+/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
{
struct pglist_data *pgdat;
unsigned long zones_size[MAX_NR_ZONES] = {0};
struct resource *res;
int ret;
+ lock_system_sleep();
+
res = register_memory_resource(start, size);
+ ret = -EEXIST;
if (!res)
- return -EEXIST;
+ goto out;
if (!node_online(nid)) {
pgdat = hotadd_new_pgdat(nid, start);
+ ret = -ENOMEM;
if (!pgdat)
- return -ENOMEM;
+ goto out;
new_pgdat = 1;
}
BUG_ON(ret);
}
- return ret;
+ goto out;
+
error:
/* rollback pgdat allocation and others */
if (new_pgdat)
if (res)
release_memory_resource(res);
+out:
+ unlock_system_sleep();
return ret;
}
EXPORT_SYMBOL_GPL(add_memory);
if (!test_pages_in_a_zone(start_pfn, end_pfn))
return -EINVAL;
+ lock_system_sleep();
+
zone = page_zone(pfn_to_page(start_pfn));
node = zone_to_nid(zone);
nr_pages = end_pfn - start_pfn;
/* set above range as isolated */
ret = start_isolate_page_range(start_pfn, end_pfn);
if (ret)
- return ret;
+ goto out;
arg.start_pfn = start_pfn;
arg.nr_pages = nr_pages;
writeback_set_ratelimit();
memory_notify(MEM_OFFLINE, &arg);
+ unlock_system_sleep();
return 0;
failed_removal:
/* pushback to free area */
undo_isolate_page_range(start_pfn, end_pfn);
+out:
+ unlock_system_sleep();
return ret;
}
}
/**
- * pcpu_extend_area_map - extend area map for allocation
- * @chunk: target chunk
+ * pcpu_need_to_extend - determine whether chunk area map needs to be extended
+ * @chunk: chunk of interest
*
- * Extend area map of @chunk so that it can accomodate an allocation.
- * A single allocation can split an area into three areas, so this
- * function makes sure that @chunk->map has at least two extra slots.
+ * Determine whether area map of @chunk needs to be extended to
+ * accomodate a new allocation.
*
* CONTEXT:
- * pcpu_alloc_mutex, pcpu_lock. pcpu_lock is released and reacquired
- * if area map is extended.
+ * pcpu_lock.
*
* RETURNS:
- * 0 if noop, 1 if successfully extended, -errno on failure.
+ * New target map allocation length if extension is necessary, 0
+ * otherwise.
*/
-static int pcpu_extend_area_map(struct pcpu_chunk *chunk, unsigned long *flags)
+static int pcpu_need_to_extend(struct pcpu_chunk *chunk)
{
int new_alloc;
- int *new;
- size_t size;
- /* has enough? */
if (chunk->map_alloc >= chunk->map_used + 2)
return 0;
- spin_unlock_irqrestore(&pcpu_lock, *flags);
-
new_alloc = PCPU_DFL_MAP_ALLOC;
while (new_alloc < chunk->map_used + 2)
new_alloc *= 2;
- new = pcpu_mem_alloc(new_alloc * sizeof(new[0]));
- if (!new) {
- spin_lock_irqsave(&pcpu_lock, *flags);
+ return new_alloc;
+}
+
+/**
+ * pcpu_extend_area_map - extend area map of a chunk
+ * @chunk: chunk of interest
+ * @new_alloc: new target allocation length of the area map
+ *
+ * Extend area map of @chunk to have @new_alloc entries.
+ *
+ * CONTEXT:
+ * Does GFP_KERNEL allocation. Grabs and releases pcpu_lock.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int pcpu_extend_area_map(struct pcpu_chunk *chunk, int new_alloc)
+{
+ int *old = NULL, *new = NULL;
+ size_t old_size = 0, new_size = new_alloc * sizeof(new[0]);
+ unsigned long flags;
+
+ new = pcpu_mem_alloc(new_size);
+ if (!new)
return -ENOMEM;
- }
- /*
- * Acquire pcpu_lock and switch to new area map. Only free
- * could have happened inbetween, so map_used couldn't have
- * grown.
- */
- spin_lock_irqsave(&pcpu_lock, *flags);
- BUG_ON(new_alloc < chunk->map_used + 2);
+ /* acquire pcpu_lock and switch to new area map */
+ spin_lock_irqsave(&pcpu_lock, flags);
+
+ if (new_alloc <= chunk->map_alloc)
+ goto out_unlock;
- size = chunk->map_alloc * sizeof(chunk->map[0]);
- memcpy(new, chunk->map, size);
+ old_size = chunk->map_alloc * sizeof(chunk->map[0]);
+ memcpy(new, chunk->map, old_size);
/*
* map_alloc < PCPU_DFL_MAP_ALLOC indicates that the chunk is
* one of the first chunks and still using static map.
*/
if (chunk->map_alloc >= PCPU_DFL_MAP_ALLOC)
- pcpu_mem_free(chunk->map, size);
+ old = chunk->map;
chunk->map_alloc = new_alloc;
chunk->map = new;
+ new = NULL;
+
+out_unlock:
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+
+ /*
+ * pcpu_mem_free() might end up calling vfree() which uses
+ * IRQ-unsafe lock and thus can't be called under pcpu_lock.
+ */
+ pcpu_mem_free(old, old_size);
+ pcpu_mem_free(new, new_size);
+
return 0;
}
static int warn_limit = 10;
struct pcpu_chunk *chunk;
const char *err;
- int slot, off;
+ int slot, off, new_alloc;
unsigned long flags;
if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) {
/* serve reserved allocations from the reserved chunk if available */
if (reserved && pcpu_reserved_chunk) {
chunk = pcpu_reserved_chunk;
- if (size > chunk->contig_hint ||
- pcpu_extend_area_map(chunk, &flags) < 0) {
- err = "failed to extend area map of reserved chunk";
+
+ if (size > chunk->contig_hint) {
+ err = "alloc from reserved chunk failed";
goto fail_unlock;
}
+
+ while ((new_alloc = pcpu_need_to_extend(chunk))) {
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+ if (pcpu_extend_area_map(chunk, new_alloc) < 0) {
+ err = "failed to extend area map of reserved chunk";
+ goto fail_unlock_mutex;
+ }
+ spin_lock_irqsave(&pcpu_lock, flags);
+ }
+
off = pcpu_alloc_area(chunk, size, align);
if (off >= 0)
goto area_found;
+
err = "alloc from reserved chunk failed";
goto fail_unlock;
}
if (size > chunk->contig_hint)
continue;
- switch (pcpu_extend_area_map(chunk, &flags)) {
- case 0:
- break;
- case 1:
- goto restart; /* pcpu_lock dropped, restart */
- default:
- err = "failed to extend area map";
- goto fail_unlock;
+ new_alloc = pcpu_need_to_extend(chunk);
+ if (new_alloc) {
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+ if (pcpu_extend_area_map(chunk,
+ new_alloc) < 0) {
+ err = "failed to extend area map";
+ goto fail_unlock_mutex;
+ }
+ spin_lock_irqsave(&pcpu_lock, flags);
+ /*
+ * pcpu_lock has been dropped, need to
+ * restart cpu_slot list walking.
+ */
+ goto restart;
}
off = pcpu_alloc_area(chunk, size, align);
if (ngrp)
vlan_gvrp_uninit_applicant(real_dev);
out_free_group:
- if (ngrp)
- vlan_group_free(ngrp);
+ if (ngrp) {
+ hlist_del_rcu(&ngrp->hlist);
+ /* Free the group, after all cpu's are done. */
+ call_rcu(&ngrp->rcu, vlan_rcu_free);
+ }
return err;
}
conn->type = type;
conn->mode = HCI_CM_ACTIVE;
conn->state = BT_OPEN;
+ conn->auth_type = HCI_AT_GENERAL_BONDING;
conn->power_save = 1;
conn->disc_timeout = HCI_DISCONN_TIMEOUT;
{
struct l2cap_pinfo *pi = l2cap_pi(sk);
struct l2cap_conf_req *req = data;
- struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_ERTM };
+ struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC };
void *ptr = req->data;
BT_DBG("sk %p", sk);
rfc.monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
pi->conf_state |= L2CAP_CONF_MODE_DONE;
+
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+ sizeof(rfc), (unsigned long) &rfc);
+
break;
case L2CAP_MODE_STREAMING:
pi->max_pdu_size = rfc.max_pdu_size;
pi->conf_state |= L2CAP_CONF_MODE_DONE;
+
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+ sizeof(rfc), (unsigned long) &rfc);
+
break;
default:
rfc.mode = pi->mode;
}
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
- sizeof(rfc), (unsigned long) &rfc);
-
if (result == L2CAP_CONF_SUCCESS)
pi->conf_state |= L2CAP_CONF_OUTPUT_DONE;
}
ret = notifier_to_errno(ret);
if (ret) {
- if (err) {
- printk(KERN_ERR
- "%s: name change rollback failed: %d.\n",
- dev->name, ret);
- } else {
+ /* err >= 0 after dev_alloc_name() or stores the first errno */
+ if (err >= 0) {
err = ret;
memcpy(dev->name, oldname, IFNAMSIZ);
goto rollback;
+ } else {
+ printk(KERN_ERR
+ "%s: name change rollback failed: %d.\n",
+ dev->name, ret);
}
}
NAPI_GRO_CB(skb)->free = 1;
goto done;
- }
+ } else if (skb_gro_len(p) != pinfo->gso_size)
+ return -E2BIG;
headroom = skb_headroom(p);
nskb = netdev_alloc_skb(p->dev, headroom + skb_gro_offset(p));
return -EINVAL;
}
- if ((in_dev = __in_dev_get_rtnl(dev)) == NULL)
+ if ((in_dev = __in_dev_get_rtnl(dev)) == NULL) {
+ dev_put(dev);
return -EADDRNOTAVAIL;
+ }
IPV4_DEVCONF(in_dev->cnf, MC_FORWARDING)++;
ip_rt_multicast_event(in_dev);
#if TCP_DEBUG
struct sk_buff *skb = skb_peek(&sk->sk_receive_queue);
- WARN_ON(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq));
+ WARN(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq),
+ KERN_INFO "cleanup rbuf bug: copied %X seq %X rcvnxt %X\n",
+ tp->copied_seq, TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt);
#endif
if (inet_csk_ack_scheduled(sk)) {
/* Now that we have two receive queues this
* shouldn't happen.
*/
- if (before(*seq, TCP_SKB_CB(skb)->seq)) {
- printk(KERN_INFO "recvmsg bug: copied %X "
- "seq %X\n", *seq, TCP_SKB_CB(skb)->seq);
+ if (WARN(before(*seq, TCP_SKB_CB(skb)->seq),
+ KERN_INFO "recvmsg bug: copied %X "
+ "seq %X rcvnxt %X fl %X\n", *seq,
+ TCP_SKB_CB(skb)->seq, tp->rcv_nxt,
+ flags))
break;
- }
+
offset = *seq - TCP_SKB_CB(skb)->seq;
if (tcp_hdr(skb)->syn)
offset--;
if (tcp_hdr(skb)->fin)
goto found_fin_ok;
WARN(!(flags & MSG_PEEK), KERN_INFO "recvmsg bug 2: "
- "copied %X seq %X\n", *seq,
- TCP_SKB_CB(skb)->seq);
+ "copied %X seq %X rcvnxt %X fl %X\n",
+ *seq, TCP_SKB_CB(skb)->seq,
+ tp->rcv_nxt, flags);
}
/* Well, if we have backlog, try to process it now yet. */
* local endpoint and the remote peer.
*/
int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc,
- gfp_t gfp)
+ sctp_scope_t scope, gfp_t gfp)
{
- sctp_scope_t scope;
int flags;
/* Use scoping rules to determine the subset of addresses from
* the endpoint.
*/
- scope = sctp_scope(&asoc->peer.active_path->ipaddr);
flags = (PF_INET6 == asoc->base.sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0;
if (asoc->peer.ipv4_address)
flags |= SCTP_ADDR4_PEERSUPP;
if (!new_asoc)
goto nomem;
+ if (sctp_assoc_set_bind_addr_from_ep(new_asoc,
+ sctp_scope(sctp_source(chunk)),
+ GFP_ATOMIC) < 0)
+ goto nomem_init;
+
/* The call, sctp_process_init(), can fail on memory allocation. */
if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
sctp_source(chunk),
len = ntohs(err_chunk->chunk_hdr->length) -
sizeof(sctp_chunkhdr_t);
- if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0)
- goto nomem_init;
-
repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len);
if (!repl)
goto nomem_init;
if (!new_asoc)
goto nomem;
+ if (sctp_assoc_set_bind_addr_from_ep(new_asoc,
+ sctp_scope(sctp_source(chunk)), GFP_ATOMIC) < 0)
+ goto nomem;
+
/* In the outbound INIT ACK the endpoint MUST copy its current
* Verification Tag and Peers Verification tag into a reserved
* place (local tie-tag and per tie-tag) within the state cookie.
sizeof(sctp_chunkhdr_t);
}
- if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0)
- goto nomem;
-
repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len);
if (!repl)
goto nomem;
err = -ENOMEM;
goto out_free;
}
+
+ err = sctp_assoc_set_bind_addr_from_ep(asoc, scope,
+ GFP_KERNEL);
+ if (err < 0) {
+ goto out_free;
+ }
+
}
/* Prime the peer's transport structures. */
walk_size += af->sockaddr_len;
}
- err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL);
- if (err < 0) {
- goto out_free;
- }
-
/* In case the user of sctp_connectx() wants an association
* id back, assign one now.
*/
}
/*
- * New (hopefully final) interface for the API. The option buffer is used
- * both for the returned association id and the addresses.
+ * New (hopefully final) interface for the API.
+ * We use the sctp_getaddrs_old structure so that use-space library
+ * can avoid any unnecessary allocations. The only defferent part
+ * is that we store the actual length of the address buffer into the
+ * addrs_num structure member. That way we can re-use the existing
+ * code.
*/
SCTP_STATIC int sctp_getsockopt_connectx3(struct sock* sk, int len,
char __user *optval,
int __user *optlen)
{
+ struct sctp_getaddrs_old param;
sctp_assoc_t assoc_id = 0;
int err = 0;
- if (len < sizeof(assoc_id))
+ if (len < sizeof(param))
return -EINVAL;
+ if (copy_from_user(¶m, optval, sizeof(param)))
+ return -EFAULT;
+
err = __sctp_setsockopt_connectx(sk,
- (struct sockaddr __user *)(optval + sizeof(assoc_id)),
- len - sizeof(assoc_id), &assoc_id);
+ (struct sockaddr __user *)param.addrs,
+ param.addr_num, &assoc_id);
if (err == 0 || err == -EINPROGRESS) {
if (copy_to_user(optval, &assoc_id, sizeof(assoc_id)))
goto out_unlock;
}
asoc = new_asoc;
+ err = sctp_assoc_set_bind_addr_from_ep(asoc, scope, GFP_KERNEL);
+ if (err < 0) {
+ err = -ENOMEM;
+ goto out_free;
+ }
/* If the SCTP_INIT ancillary data is specified, set all
* the association init values accordingly.
err = -ENOMEM;
goto out_free;
}
- err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL);
- if (err < 0) {
- err = -ENOMEM;
- goto out_free;
- }
}
/* ASSERT: we have a valid association at this point. */
/* Initialize sk->sk_rcv_saddr, if the transport is the
* association's active path for getsockname().
*/
- if (asoc && (transport == asoc->peer.active_path))
+ if (asoc && (!asoc->peer.primary_path ||
+ (transport == asoc->peer.active_path)))
opt->pf->af->to_sk_saddr(&transport->saddr,
asoc->base.sk);
} else
return d;
}
-struct data data_append_markers(struct data d, struct marker *m)
+static struct data data_append_markers(struct data d, struct marker *m)
{
struct marker **mp = &d.markers;
* USA
*/
-%option noyywrap nounput yylineno
+%option noyywrap noinput nounput yylineno
%x INCLUDE
%x BYTESTRING
#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 34
+#define YY_FLEX_SUBMINOR_VERSION 35
#if YY_FLEX_SUBMINOR_VERSION > 0
#define FLEX_BETA
#endif
typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
/* Limits of integral types. */
#ifndef INT8_MIN
#define UINT32_MAX (4294967295U)
#endif
+#endif /* ! C99 */
+
#endif /* ! FLEXINT_H */
#ifdef __cplusplus
/* Size of default input buffer. */
#ifndef YY_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k.
+ * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
+ * Ditto for the __ia64__ case accordingly.
+ */
+#define YY_BUF_SIZE 32768
+#else
#define YY_BUF_SIZE 16384
+#endif /* __ia64__ */
#endif
/* The state buf must be large enough to hold one state per character in the main buffer.
#define unput(c) yyunput( c, (yytext_ptr) )
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- * Given that the standard has decreed that size_t exists since 1989,
- * I guess we can afford to depend on it. Manoj.
- */
-
#ifndef YY_TYPEDEF_YY_SIZE_T
#define YY_TYPEDEF_YY_SIZE_T
typedef size_t yy_size_t;
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
* USA
*/
+#define YY_NO_INPUT 1
static void push_input_file(const char *filename);
static int pop_input_file(void);
-#line 638 "dtc-lexer.lex.c"
+#line 641 "dtc-lexer.lex.c"
#define INITIAL 0
#define INCLUDE 1
static int yy_init_globals (void );
+/* Accessor methods to globals.
+ These are made visible to non-reentrant scanners for convenience. */
+
+int yylex_destroy (void );
+
+int yyget_debug (void );
+
+void yyset_debug (int debug_flag );
+
+YY_EXTRA_TYPE yyget_extra (void );
+
+void yyset_extra (YY_EXTRA_TYPE user_defined );
+
+FILE *yyget_in (void );
+
+void yyset_in (FILE * in_str );
+
+FILE *yyget_out (void );
+
+void yyset_out (FILE * out_str );
+
+int yyget_leng (void );
+
+char *yyget_text (void );
+
+int yyget_lineno (void );
+
+void yyset_lineno (int line_number );
+
/* Macros after this point can all be overridden by user definitions in
* section 1.
*/
/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k */
+#define YY_READ_BUF_SIZE 16384
+#else
#define YY_READ_BUF_SIZE 8192
+#endif /* __ia64__ */
#endif
/* Copy whatever the last rule matched to the standard output. */
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
-#define ECHO fwrite( yytext, yyleng, 1, yyout )
+#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0)
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
{ \
int c = '*'; \
- int n; \
+ size_t n; \
for ( n = 0; n < max_size && \
(c = getc( yyin )) != EOF && c != '\n'; ++n ) \
buf[n] = (char) c; \
#line 64 "dtc-lexer.l"
-#line 795 "dtc-lexer.lex.c"
+#line 832 "dtc-lexer.lex.c"
if ( !(yy_init) )
{
#line 222 "dtc-lexer.l"
ECHO;
YY_BREAK
-#line 1120 "dtc-lexer.lex.c"
+#line 1157 "dtc-lexer.lex.c"
case YY_END_OF_BUFFER:
{
/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
* scan from a @e copy of @a bytes.
- * @param bytes the byte buffer to scan
- * @param len the number of bytes in the buffer pointed to by @a bytes.
+ * @param yybytes the byte buffer to scan
+ * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
*
* @return the newly allocated buffer state object.
*/
&phandle, sizeof(phandle));
}
-int _stringlist_contains(const char *strlist, int listlen, const char *str)
+static int _stringlist_contains(const char *strlist, int listlen, const char *str)
{
int len = strlen(str);
const char *p;
fputc('\t', f);
}
-int isstring(char c)
+static int isstring(char c)
{
return (isprint(c)
|| (c == '\0')
-/* ANSI-C code produced by gperf version 3.0.2 */
+/* ANSI-C code produced by gperf version 3.0.3 */
/* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */
#if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
#line 1 "scripts/genksyms/keywords.gperf"
-#line 3 "scripts/genksyms/keywords.gperf"
+struct resword;
+static const struct resword *is_reserved_word(register const char *str, register unsigned int len);
+#line 5 "scripts/genksyms/keywords.gperf"
struct resword { const char *name; int token; };
/* maximum key range = 62, duplicates = 0 */
#ifdef __GNUC__
__inline
+#ifdef __GNUC_STDC_INLINE__
+__attribute__ ((__gnu_inline__))
+#endif
#endif
const struct resword *
is_reserved_word (register const char *str, register unsigned int len)
static const struct resword wordlist[] =
{
{""}, {""}, {""},
-#line 26 "scripts/genksyms/keywords.gperf"
+#line 28 "scripts/genksyms/keywords.gperf"
{"asm", ASM_KEYW},
{""},
-#line 8 "scripts/genksyms/keywords.gperf"
+#line 10 "scripts/genksyms/keywords.gperf"
{"__asm", ASM_KEYW},
{""},
-#line 9 "scripts/genksyms/keywords.gperf"
+#line 11 "scripts/genksyms/keywords.gperf"
{"__asm__", ASM_KEYW},
{""}, {""},
-#line 52 "scripts/genksyms/keywords.gperf"
+#line 54 "scripts/genksyms/keywords.gperf"
{"__typeof__", TYPEOF_KEYW},
{""},
-#line 12 "scripts/genksyms/keywords.gperf"
+#line 14 "scripts/genksyms/keywords.gperf"
{"__const", CONST_KEYW},
-#line 11 "scripts/genksyms/keywords.gperf"
- {"__attribute__", ATTRIBUTE_KEYW},
#line 13 "scripts/genksyms/keywords.gperf"
+ {"__attribute__", ATTRIBUTE_KEYW},
+#line 15 "scripts/genksyms/keywords.gperf"
{"__const__", CONST_KEYW},
-#line 18 "scripts/genksyms/keywords.gperf"
+#line 20 "scripts/genksyms/keywords.gperf"
{"__signed__", SIGNED_KEYW},
-#line 44 "scripts/genksyms/keywords.gperf"
+#line 46 "scripts/genksyms/keywords.gperf"
{"static", STATIC_KEYW},
-#line 20 "scripts/genksyms/keywords.gperf"
+#line 22 "scripts/genksyms/keywords.gperf"
{"__volatile__", VOLATILE_KEYW},
-#line 39 "scripts/genksyms/keywords.gperf"
+#line 41 "scripts/genksyms/keywords.gperf"
{"int", INT_KEYW},
-#line 32 "scripts/genksyms/keywords.gperf"
+#line 34 "scripts/genksyms/keywords.gperf"
{"char", CHAR_KEYW},
-#line 33 "scripts/genksyms/keywords.gperf"
+#line 35 "scripts/genksyms/keywords.gperf"
{"const", CONST_KEYW},
-#line 45 "scripts/genksyms/keywords.gperf"
+#line 47 "scripts/genksyms/keywords.gperf"
{"struct", STRUCT_KEYW},
-#line 24 "scripts/genksyms/keywords.gperf"
+#line 26 "scripts/genksyms/keywords.gperf"
{"__restrict__", RESTRICT_KEYW},
-#line 25 "scripts/genksyms/keywords.gperf"
+#line 27 "scripts/genksyms/keywords.gperf"
{"restrict", RESTRICT_KEYW},
-#line 23 "scripts/genksyms/keywords.gperf"
+#line 25 "scripts/genksyms/keywords.gperf"
{"_restrict", RESTRICT_KEYW},
-#line 16 "scripts/genksyms/keywords.gperf"
+#line 18 "scripts/genksyms/keywords.gperf"
{"__inline__", INLINE_KEYW},
-#line 10 "scripts/genksyms/keywords.gperf"
+#line 12 "scripts/genksyms/keywords.gperf"
{"__attribute", ATTRIBUTE_KEYW},
{""},
-#line 14 "scripts/genksyms/keywords.gperf"
+#line 16 "scripts/genksyms/keywords.gperf"
{"__extension__", EXTENSION_KEYW},
-#line 35 "scripts/genksyms/keywords.gperf"
+#line 37 "scripts/genksyms/keywords.gperf"
{"enum", ENUM_KEYW},
-#line 19 "scripts/genksyms/keywords.gperf"
+#line 21 "scripts/genksyms/keywords.gperf"
{"__volatile", VOLATILE_KEYW},
-#line 36 "scripts/genksyms/keywords.gperf"
+#line 38 "scripts/genksyms/keywords.gperf"
{"extern", EXTERN_KEYW},
{""},
-#line 17 "scripts/genksyms/keywords.gperf"
+#line 19 "scripts/genksyms/keywords.gperf"
{"__signed", SIGNED_KEYW},
-#line 7 "scripts/genksyms/keywords.gperf"
+#line 9 "scripts/genksyms/keywords.gperf"
{"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
{""},
-#line 51 "scripts/genksyms/keywords.gperf"
+#line 53 "scripts/genksyms/keywords.gperf"
{"typeof", TYPEOF_KEYW},
-#line 46 "scripts/genksyms/keywords.gperf"
+#line 48 "scripts/genksyms/keywords.gperf"
{"typedef", TYPEDEF_KEYW},
-#line 15 "scripts/genksyms/keywords.gperf"
+#line 17 "scripts/genksyms/keywords.gperf"
{"__inline", INLINE_KEYW},
-#line 31 "scripts/genksyms/keywords.gperf"
+#line 33 "scripts/genksyms/keywords.gperf"
{"auto", AUTO_KEYW},
-#line 47 "scripts/genksyms/keywords.gperf"
+#line 49 "scripts/genksyms/keywords.gperf"
{"union", UNION_KEYW},
{""}, {""},
-#line 48 "scripts/genksyms/keywords.gperf"
+#line 50 "scripts/genksyms/keywords.gperf"
{"unsigned", UNSIGNED_KEYW},
-#line 49 "scripts/genksyms/keywords.gperf"
+#line 51 "scripts/genksyms/keywords.gperf"
{"void", VOID_KEYW},
-#line 42 "scripts/genksyms/keywords.gperf"
+#line 44 "scripts/genksyms/keywords.gperf"
{"short", SHORT_KEYW},
{""}, {""},
-#line 50 "scripts/genksyms/keywords.gperf"
+#line 52 "scripts/genksyms/keywords.gperf"
{"volatile", VOLATILE_KEYW},
{""},
-#line 37 "scripts/genksyms/keywords.gperf"
+#line 39 "scripts/genksyms/keywords.gperf"
{"float", FLOAT_KEYW},
-#line 34 "scripts/genksyms/keywords.gperf"
+#line 36 "scripts/genksyms/keywords.gperf"
{"double", DOUBLE_KEYW},
{""},
-#line 5 "scripts/genksyms/keywords.gperf"
+#line 7 "scripts/genksyms/keywords.gperf"
{"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
{""}, {""},
-#line 38 "scripts/genksyms/keywords.gperf"
+#line 40 "scripts/genksyms/keywords.gperf"
{"inline", INLINE_KEYW},
-#line 6 "scripts/genksyms/keywords.gperf"
+#line 8 "scripts/genksyms/keywords.gperf"
{"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
-#line 41 "scripts/genksyms/keywords.gperf"
+#line 43 "scripts/genksyms/keywords.gperf"
{"register", REGISTER_KEYW},
{""},
-#line 22 "scripts/genksyms/keywords.gperf"
+#line 24 "scripts/genksyms/keywords.gperf"
{"_Bool", BOOL_KEYW},
-#line 43 "scripts/genksyms/keywords.gperf"
+#line 45 "scripts/genksyms/keywords.gperf"
{"signed", SIGNED_KEYW},
{""}, {""},
-#line 40 "scripts/genksyms/keywords.gperf"
+#line 42 "scripts/genksyms/keywords.gperf"
{"long", LONG_KEYW}
};
%{
+struct resword;
+static const struct resword *is_reserved_word(register const char *str, register unsigned int len);
%}
struct resword { const char *name; int token; }
%%
/* Size of default input buffer. */
#ifndef YY_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k.
+ * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
+ * Ditto for the __ia64__ case accordingly.
+ */
+#define YY_BUF_SIZE 32768
+#else
#define YY_BUF_SIZE 16384
+#endif /* __ia64__ */
#endif
/* The state buf must be large enough to hold one state per character in the main buffer.
static void zconf_endhelp(void);
static void zconf_endfile(void);
-void new_string(void)
+static void new_string(void)
{
text = malloc(START_STRSIZE);
text_asize = START_STRSIZE;
*text = 0;
}
-void append_string(const char *str, int size)
+static void append_string(const char *str, int size)
{
int new_size = text_size + size + 1;
if (new_size > text_asize) {
text[text_size] = 0;
}
-void alloc_string(const char *str, int size)
+static void alloc_string(const char *str, int size)
{
text = malloc(size + 1);
memcpy(text, str, size);
/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k */
+#define YY_READ_BUF_SIZE 16384
+#else
#define YY_READ_BUF_SIZE 8192
+#endif /* __ia64__ */
#endif
/* Copy whatever the last rule matched to the standard output. */
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
-#define ECHO fwrite( zconftext, zconfleng, 1, zconfout )
+#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0)
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
/** Setup the input buffer state to scan the given bytes. The next call to zconflex() will
* scan from a @e copy of @a bytes.
- * @param bytes the byte buffer to scan
- * @param len the number of bytes in the buffer pointed to by @a bytes.
+ * @param yybytes the byte buffer to scan
+ * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
*
* @return the newly allocated buffer state object.
*/
struct kconf_id;
+static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
+
%%
mainmenu, T_MAINMENU, TF_COMMAND
menu, T_MENU, TF_COMMAND
#endif
struct kconf_id;
+
+static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
/* maximum key range = 47, duplicates = 0 */
#ifdef __GNUC__
static void zconf_endhelp(void);
static void zconf_endfile(void);
-void new_string(void)
+static void new_string(void)
{
text = malloc(START_STRSIZE);
text_asize = START_STRSIZE;
*text = 0;
}
-void append_string(const char *str, int size)
+static void append_string(const char *str, int size)
{
int new_size = text_size + size + 1;
if (new_size > text_asize) {
text[text_size] = 0;
}
-void alloc_string(const char *str, int size)
+static void alloc_string(const char *str, int size)
{
text = malloc(size + 1);
memcpy(text, str, size);
-/* A Bison parser, made by GNU Bison 2.3. */
-/* Skeleton implementation for Bison's Yacc-like parsers in C
+/* A Bison parser, made by GNU Bison 2.4.1. */
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+/* Skeleton implementation for Bison's Yacc-like parsers in C
+
+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
+
+ This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* As a special exception, you may create a larger work that contains
part or all of the Bison parser skeleton and distribute that work
special exception, which will cause the skeleton and the resulting
Bison output files to be licensed under the GNU General Public
License without this special exception.
-
+
This special exception was added by the Free Software Foundation in
version 2.2 of Bison. */
#define YYBISON 1
/* Bison version. */
-#define YYBISON_VERSION "2.3"
+#define YYBISON_VERSION "2.4.1"
/* Skeleton name. */
#define YYSKELETON_NAME "yacc.c"
/* Pure parsers. */
#define YYPURE 0
+/* Push parsers. */
+#define YYPUSH 0
+
+/* Pull parsers. */
+#define YYPULL 1
+
/* Using locations. */
#define YYLSP_NEEDED 0
/* Substitute the variable and function names. */
-#define yyparse zconfparse
-#define yylex zconflex
-#define yyerror zconferror
-#define yylval zconflval
-#define yychar zconfchar
-#define yydebug zconfdebug
-#define yynerrs zconfnerrs
-
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- T_MAINMENU = 258,
- T_MENU = 259,
- T_ENDMENU = 260,
- T_SOURCE = 261,
- T_CHOICE = 262,
- T_ENDCHOICE = 263,
- T_COMMENT = 264,
- T_CONFIG = 265,
- T_MENUCONFIG = 266,
- T_HELP = 267,
- T_HELPTEXT = 268,
- T_IF = 269,
- T_ENDIF = 270,
- T_DEPENDS = 271,
- T_OPTIONAL = 272,
- T_PROMPT = 273,
- T_TYPE = 274,
- T_DEFAULT = 275,
- T_SELECT = 276,
- T_RANGE = 277,
- T_OPTION = 278,
- T_ON = 279,
- T_WORD = 280,
- T_WORD_QUOTE = 281,
- T_UNEQUAL = 282,
- T_CLOSE_PAREN = 283,
- T_OPEN_PAREN = 284,
- T_EOL = 285,
- T_OR = 286,
- T_AND = 287,
- T_EQUAL = 288,
- T_NOT = 289
- };
-#endif
-/* Tokens. */
-#define T_MAINMENU 258
-#define T_MENU 259
-#define T_ENDMENU 260
-#define T_SOURCE 261
-#define T_CHOICE 262
-#define T_ENDCHOICE 263
-#define T_COMMENT 264
-#define T_CONFIG 265
-#define T_MENUCONFIG 266
-#define T_HELP 267
-#define T_HELPTEXT 268
-#define T_IF 269
-#define T_ENDIF 270
-#define T_DEPENDS 271
-#define T_OPTIONAL 272
-#define T_PROMPT 273
-#define T_TYPE 274
-#define T_DEFAULT 275
-#define T_SELECT 276
-#define T_RANGE 277
-#define T_OPTION 278
-#define T_ON 279
-#define T_WORD 280
-#define T_WORD_QUOTE 281
-#define T_UNEQUAL 282
-#define T_CLOSE_PAREN 283
-#define T_OPEN_PAREN 284
-#define T_EOL 285
-#define T_OR 286
-#define T_AND 287
-#define T_EQUAL 288
-#define T_NOT 289
-
-
+#define yyparse zconfparse
+#define yylex zconflex
+#define yyerror zconferror
+#define yylval zconflval
+#define yychar zconfchar
+#define yydebug zconfdebug
+#define yynerrs zconfnerrs
/* Copy the first part of user declarations. */
#define LKC_DIRECT_LINK
#include "lkc.h"
-#include "zconf.hash.c"
-
#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt)
#define PRINTD 0x0001
#endif
+
/* Enabling traces. */
#ifndef YYDEBUG
# define YYDEBUG 0
# define YYTOKEN_TABLE 0
#endif
+
+/* Tokens. */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+ /* Put the tokens into the symbol table, so that GDB and other debuggers
+ know about them. */
+ enum yytokentype {
+ T_MAINMENU = 258,
+ T_MENU = 259,
+ T_ENDMENU = 260,
+ T_SOURCE = 261,
+ T_CHOICE = 262,
+ T_ENDCHOICE = 263,
+ T_COMMENT = 264,
+ T_CONFIG = 265,
+ T_MENUCONFIG = 266,
+ T_HELP = 267,
+ T_HELPTEXT = 268,
+ T_IF = 269,
+ T_ENDIF = 270,
+ T_DEPENDS = 271,
+ T_OPTIONAL = 272,
+ T_PROMPT = 273,
+ T_TYPE = 274,
+ T_DEFAULT = 275,
+ T_SELECT = 276,
+ T_RANGE = 277,
+ T_OPTION = 278,
+ T_ON = 279,
+ T_WORD = 280,
+ T_WORD_QUOTE = 281,
+ T_UNEQUAL = 282,
+ T_CLOSE_PAREN = 283,
+ T_OPEN_PAREN = 284,
+ T_EOL = 285,
+ T_OR = 286,
+ T_AND = 287,
+ T_EQUAL = 288,
+ T_NOT = 289
+ };
+#endif
+
+
+
#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
typedef union YYSTYPE
-
{
+
+
char *string;
struct file *file;
struct symbol *symbol;
struct expr *expr;
struct menu *menu;
struct kconf_id *id;
-}
-/* Line 187 of yacc.c. */
- YYSTYPE;
+
+
+} YYSTYPE;
+# define YYSTYPE_IS_TRIVIAL 1
# define yystype YYSTYPE /* obsolescent; will be withdrawn */
# define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
#endif
-
/* Copy the second part of user declarations. */
-/* Line 216 of yacc.c. */
+/* Include zconf.hash.c here so it can see the token constants. */
+#include "zconf.hash.c"
+
#ifdef short
#if (defined __STDC__ || defined __C99__FUNC__ \
|| defined __cplusplus || defined _MSC_VER)
static int
-YYID (int i)
+YYID (int yyi)
#else
static int
-YYID (i)
- int i;
+YYID (yyi)
+ int yyi;
#endif
{
- return i;
+ return yyi;
}
#endif
/* A type that is properly aligned for any stack member. */
union yyalloc
{
- yytype_int16 yyss;
- YYSTYPE yyvs;
- };
+ yytype_int16 yyss_alloc;
+ YYSTYPE yyvs_alloc;
+};
/* The size of the maximum gap between one aligned stack and the next. */
# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
elements in the stack, and YYPTR gives the new location of the
stack. Advance YYPTR to a properly aligned location for the next
stack. */
-# define YYSTACK_RELOCATE(Stack) \
+# define YYSTACK_RELOCATE(Stack_alloc, Stack) \
do \
{ \
YYSIZE_T yynewbytes; \
- YYCOPY (&yyptr->Stack, Stack, yysize); \
- Stack = &yyptr->Stack; \
+ YYCOPY (&yyptr->Stack_alloc, Stack, yysize); \
+ Stack = &yyptr->Stack_alloc; \
yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
yyptr += yynewbytes / sizeof (*yyptr); \
} \
/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
static const yytype_uint16 yyrline[] =
{
- 0, 104, 104, 106, 108, 109, 110, 111, 112, 113,
- 114, 118, 122, 122, 122, 122, 122, 122, 122, 126,
- 127, 128, 129, 130, 131, 135, 136, 142, 150, 156,
- 164, 174, 176, 177, 178, 179, 180, 181, 184, 192,
- 198, 208, 214, 220, 223, 225, 236, 237, 242, 251,
- 256, 264, 267, 269, 270, 271, 272, 273, 276, 282,
- 293, 299, 309, 311, 316, 324, 332, 335, 337, 338,
- 339, 344, 351, 356, 364, 367, 369, 370, 371, 374,
- 382, 389, 396, 402, 409, 411, 412, 413, 416, 424,
- 426, 431, 432, 435, 436, 437, 441, 442, 445, 446,
- 449, 450, 451, 452, 453, 454, 455, 458, 459, 462,
- 463
+ 0, 107, 107, 109, 111, 112, 113, 114, 115, 116,
+ 117, 121, 125, 125, 125, 125, 125, 125, 125, 129,
+ 130, 131, 132, 133, 134, 138, 139, 145, 153, 159,
+ 167, 177, 179, 180, 181, 182, 183, 184, 187, 195,
+ 201, 211, 217, 223, 226, 228, 239, 240, 245, 254,
+ 259, 267, 270, 272, 273, 274, 275, 276, 279, 285,
+ 296, 302, 312, 314, 319, 327, 335, 338, 340, 341,
+ 342, 347, 354, 359, 367, 370, 372, 373, 374, 377,
+ 385, 392, 399, 405, 412, 414, 415, 416, 419, 427,
+ 429, 434, 435, 438, 439, 440, 444, 445, 448, 449,
+ 452, 453, 454, 455, 456, 457, 458, 461, 462, 465,
+ 466
};
#endif
#if (defined __STDC__ || defined __C99__FUNC__ \
|| defined __cplusplus || defined _MSC_VER)
static void
-yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
+yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop)
#else
static void
-yy_stack_print (bottom, top)
- yytype_int16 *bottom;
- yytype_int16 *top;
+yy_stack_print (yybottom, yytop)
+ yytype_int16 *yybottom;
+ yytype_int16 *yytop;
#endif
{
YYFPRINTF (stderr, "Stack now");
- for (; bottom <= top; ++bottom)
- YYFPRINTF (stderr, " %d", *bottom);
+ for (; yybottom <= yytop; yybottom++)
+ {
+ int yybot = *yybottom;
+ YYFPRINTF (stderr, " %d", yybot);
+ }
YYFPRINTF (stderr, "\n");
}
/* The symbols being reduced. */
for (yyi = 0; yyi < yynrhs; yyi++)
{
- fprintf (stderr, " $%d = ", yyi + 1);
+ YYFPRINTF (stderr, " $%d = ", yyi + 1);
yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
&(yyvsp[(yyi + 1) - (yynrhs)])
);
- fprintf (stderr, "\n");
+ YYFPRINTF (stderr, "\n");
}
}
break;
}
}
-\f
/* Prevent warnings from -Wmissing-prototypes. */
-
#ifdef YYPARSE_PARAM
#if defined __STDC__ || defined __cplusplus
int yyparse (void *YYPARSE_PARAM);
#endif /* ! YYPARSE_PARAM */
-
-/* The look-ahead symbol. */
+/* The lookahead symbol. */
int yychar;
-/* The semantic value of the look-ahead symbol. */
+/* The semantic value of the lookahead symbol. */
YYSTYPE yylval;
/* Number of syntax errors so far. */
-/*----------.
-| yyparse. |
-`----------*/
+/*-------------------------.
+| yyparse or yypush_parse. |
+`-------------------------*/
#ifdef YYPARSE_PARAM
#if (defined __STDC__ || defined __C99__FUNC__ \
#endif
#endif
{
-
- int yystate;
- int yyn;
- int yyresult;
- /* Number of tokens to shift before error messages enabled. */
- int yyerrstatus;
- /* Look-ahead token as an internal (translated) token number. */
- int yytoken = 0;
-#if YYERROR_VERBOSE
- /* Buffer for error messages, and its allocated size. */
- char yymsgbuf[128];
- char *yymsg = yymsgbuf;
- YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
-#endif
-
- /* Three stacks and their tools:
- `yyss': related to states,
- `yyvs': related to semantic values,
- `yyls': related to locations.
- Refer to the stacks thru separate pointers, to allow yyoverflow
- to reallocate them elsewhere. */
- /* The state stack. */
- yytype_int16 yyssa[YYINITDEPTH];
- yytype_int16 *yyss = yyssa;
- yytype_int16 *yyssp;
+ int yystate;
+ /* Number of tokens to shift before error messages enabled. */
+ int yyerrstatus;
- /* The semantic value stack. */
- YYSTYPE yyvsa[YYINITDEPTH];
- YYSTYPE *yyvs = yyvsa;
- YYSTYPE *yyvsp;
+ /* The stacks and their tools:
+ `yyss': related to states.
+ `yyvs': related to semantic values.
+ Refer to the stacks thru separate pointers, to allow yyoverflow
+ to reallocate them elsewhere. */
+ /* The state stack. */
+ yytype_int16 yyssa[YYINITDEPTH];
+ yytype_int16 *yyss;
+ yytype_int16 *yyssp;
-#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N))
+ /* The semantic value stack. */
+ YYSTYPE yyvsa[YYINITDEPTH];
+ YYSTYPE *yyvs;
+ YYSTYPE *yyvsp;
- YYSIZE_T yystacksize = YYINITDEPTH;
+ YYSIZE_T yystacksize;
+ int yyn;
+ int yyresult;
+ /* Lookahead token as an internal (translated) token number. */
+ int yytoken;
/* The variables used to return semantic value and location from the
action routines. */
YYSTYPE yyval;
+#if YYERROR_VERBOSE
+ /* Buffer for error messages, and its allocated size. */
+ char yymsgbuf[128];
+ char *yymsg = yymsgbuf;
+ YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
+#endif
+
+#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N))
/* The number of symbols on the RHS of the reduced rule.
Keep to zero when no symbol should be popped. */
int yylen = 0;
+ yytoken = 0;
+ yyss = yyssa;
+ yyvs = yyvsa;
+ yystacksize = YYINITDEPTH;
+
YYDPRINTF ((stderr, "Starting parse\n"));
yystate = 0;
yyerrstatus = 0;
yynerrs = 0;
- yychar = YYEMPTY; /* Cause a token to be read. */
+ yychar = YYEMPTY; /* Cause a token to be read. */
/* Initialize stack pointers.
Waste one element of value and location stack
so that they stay on the same level as the state stack.
The wasted elements are never initialized. */
-
yyssp = yyss;
yyvsp = yyvs;
YYSTYPE *yyvs1 = yyvs;
yytype_int16 *yyss1 = yyss;
-
/* Each stack pointer address is followed by the size of the
data in use in that stack, in bytes. This used to be a
conditional around just the two extra args, but that might
yyoverflow (YY_("memory exhausted"),
&yyss1, yysize * sizeof (*yyssp),
&yyvs1, yysize * sizeof (*yyvsp),
-
&yystacksize);
yyss = yyss1;
(union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
if (! yyptr)
goto yyexhaustedlab;
- YYSTACK_RELOCATE (yyss);
- YYSTACK_RELOCATE (yyvs);
-
+ YYSTACK_RELOCATE (yyss_alloc, yyss);
+ YYSTACK_RELOCATE (yyvs_alloc, yyvs);
# undef YYSTACK_RELOCATE
if (yyss1 != yyssa)
YYSTACK_FREE (yyss1);
yyssp = yyss + yysize - 1;
yyvsp = yyvs + yysize - 1;
-
YYDPRINTF ((stderr, "Stack size increased to %lu\n",
(unsigned long int) yystacksize));
YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+ if (yystate == YYFINAL)
+ YYACCEPT;
+
goto yybackup;
/*-----------.
yybackup:
/* Do appropriate processing given the current state. Read a
- look-ahead token if we need one and don't already have one. */
+ lookahead token if we need one and don't already have one. */
- /* First try to decide what to do without reference to look-ahead token. */
+ /* First try to decide what to do without reference to lookahead token. */
yyn = yypact[yystate];
if (yyn == YYPACT_NINF)
goto yydefault;
- /* Not known => get a look-ahead token if don't already have one. */
+ /* Not known => get a lookahead token if don't already have one. */
- /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */
+ /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
if (yychar == YYEMPTY)
{
YYDPRINTF ((stderr, "Reading a token: "));
goto yyreduce;
}
- if (yyn == YYFINAL)
- YYACCEPT;
-
/* Count tokens shifted since error; after three, turn off error
status. */
if (yyerrstatus)
yyerrstatus--;
- /* Shift the look-ahead token. */
+ /* Shift the lookahead token. */
YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
- /* Discard the shifted token unless it is eof. */
- if (yychar != YYEOF)
- yychar = YYEMPTY;
+ /* Discard the shifted token. */
+ yychar = YYEMPTY;
yystate = yyn;
*++yyvsp = yylval;
break;
-/* Line 1267 of yacc.c. */
default: break;
}
*++yyvsp = yyval;
-
/* Now `shift' the result of the reduction. Determine what state
that goes to, based on the state we popped back to and the rule
number reduced by. */
if (yyerrstatus == 3)
{
- /* If just tried and failed to reuse look-ahead token after an
+ /* If just tried and failed to reuse lookahead token after an
error, discard it. */
if (yychar <= YYEOF)
}
}
- /* Else will try to reuse look-ahead token after shifting the error
+ /* Else will try to reuse lookahead token after shifting the error
token. */
goto yyerrlab1;
YY_STACK_PRINT (yyss, yyssp);
}
- if (yyn == YYFINAL)
- YYACCEPT;
-
*++yyvsp = yylval;
yyresult = 1;
goto yyreturn;
-#ifndef yyoverflow
+#if !defined(yyoverflow) || YYERROR_VERBOSE
/*-------------------------------------------------.
| yyexhaustedlab -- memory exhaustion comes here. |
`-------------------------------------------------*/
#endif
yyreturn:
- if (yychar != YYEOF && yychar != YYEMPTY)
+ if (yychar != YYEMPTY)
yydestruct ("Cleanup: discarding lookahead",
yytoken, &yylval);
/* Do not reclaim the symbols of the rule which action triggered
sym_set_change_count(1);
}
-const char *zconf_tokenname(int token)
+static const char *zconf_tokenname(int token)
{
switch (token) {
case T_MENU: return "menu";
#endif
}
-void print_quoted_string(FILE *out, const char *str)
+static void print_quoted_string(FILE *out, const char *str)
{
const char *p;
int len;
putc('"', out);
}
-void print_symbol(FILE *out, struct menu *menu)
+static void print_symbol(FILE *out, struct menu *menu)
{
struct symbol *sym = menu->sym;
struct property *prop;
#define LKC_DIRECT_LINK
#include "lkc.h"
-#include "zconf.hash.c"
-
#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt)
#define PRINTD 0x0001
menu_end_menu();
} if_entry menu_entry choice_entry
+%{
+/* Include zconf.hash.c here so it can see the token constants. */
+#include "zconf.hash.c"
+%}
+
%%
input: stmt_list;
sym_set_change_count(1);
}
-const char *zconf_tokenname(int token)
+static const char *zconf_tokenname(int token)
{
switch (token) {
case T_MENU: return "menu";
#endif
}
-void print_quoted_string(FILE *out, const char *str)
+static void print_quoted_string(FILE *out, const char *str)
{
const char *p;
int len;
putc('"', out);
}
-void print_symbol(FILE *out, struct menu *menu)
+static void print_symbol(FILE *out, struct menu *menu)
{
struct symbol *sym = menu->sym;
struct property *prop;
#define MAX_SIZE (256*1024)
unsigned char buf[MAX_SIZE];
-int loadhex(FILE *inf, unsigned char *buf)
+static int loadhex(FILE *inf, unsigned char *buf)
{
int l=0, c, i;
static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+ { .id = 0x10de0005, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
MODULE_ALIAS("snd-hda-codec-id:10de0002");
MODULE_ALIAS("snd-hda-codec-id:10de0003");
+MODULE_ALIAS("snd-hda-codec-id:10de0005");
MODULE_ALIAS("snd-hda-codec-id:10de0006");
MODULE_ALIAS("snd-hda-codec-id:10de0007");
MODULE_ALIAS("snd-hda-codec-id:10de0067");
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
- /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently
- * no perfect solution yet
+ /* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2,
+ * so apparently no perfect solution yet
*/
SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5),
+ SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC885_MB5),
{} /* terminator */
};
SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */
SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06),
SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO),
+ SND_PCI_QUIRK(0x104d, 0x9047, "Sony VAIO Type G", ALC262_AUTO),
SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO",
ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1",
"Dell Studio 17", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be,
"Dell Studio 1555", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02bd,
+ "Dell Studio 1557", STAC_DELL_M6_DMIC),
{} /* terminator */
};
#ifdef CONFIG_PM
int (*pm_suspend)(struct snd_ice1712 *);
int (*pm_resume)(struct snd_ice1712 *);
- int pm_suspend_enabled:1;
- int pm_saved_is_spdif_master:1;
+ unsigned int pm_suspend_enabled:1;
+ unsigned int pm_saved_is_spdif_master:1;
unsigned int pm_saved_spdif_ctrl;
unsigned char pm_saved_spdif_cfg;
unsigned int pm_saved_route;
}
#ifdef CONFIG_PM
-static int __devinit prodigy_hd2_resume(struct snd_ice1712 *ice)
+static int prodigy_hd2_resume(struct snd_ice1712 *ice)
{
/* initialize ak4396 codec and restore previous mixer volumes */
struct prodigy_hifi_spec *spec = ice->spec;
#define UPPER_GROUP ((1<<8) | (1<<9) | (1<<10) | (1<<11) | (1<<15))
static const unsigned short sr_valid_mask[] = {
LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 0*/
- LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 1*/
LOWER_GROUP, /* Usb, bosr - 0*/
+ LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 1*/
UPPER_GROUP, /* Usb, bosr - 1*/
};
/*
MODULE_AUTHOR("Anuj Aggarwal <anuj.aggarwal@ti.com>");
MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
* |P| <--- TWL4030 <--------- Line In and MICs
*/
static const struct snd_soc_dapm_widget omap3pandora_out_dapm_widgets[] = {
- SND_SOC_DAPM_DAC("PCM DAC", "Playback", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_DAC("PCM DAC", "HiFi Playback", SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_PGA_E("Headphone Amplifier", SND_SOC_NOPM,
0, 0, NULL, 0, omap3pandora_hp_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
snd_soc_dapm_nc_pin(codec, "CARKITR");
snd_soc_dapm_nc_pin(codec, "HFL");
snd_soc_dapm_nc_pin(codec, "HFR");
+ snd_soc_dapm_nc_pin(codec, "VIBRA");
ret = snd_soc_dapm_new_controls(codec, omap3pandora_out_dapm_widgets,
ARRAY_SIZE(omap3pandora_out_dapm_widgets));
channels = (ftr[0] - 7) / csize - 1;
master_bits = snd_usb_combine_bytes(ftr + 6, csize);
+ /* master configuration quirks */
+ switch (state->chip->usb_id) {
+ case USB_ID(0x08bb, 0x2702):
+ snd_printk(KERN_INFO
+ "usbmixer: master volume quirk for PCM2702 chip\n");
+ /* disable non-functional volume control */
+ master_bits &= ~(1 << (USB_FEATURE_VOLUME - 1));
+ break;
+ }
if (channels > 0)
first_ch_bits = snd_usb_combine_bytes(ftr + 6 + csize, csize);
else
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff