rcu: Enable fourth level of TREE_RCU hierarchy

Enable a fourth level of rcu_node hierarchy for TREE_RCU and
TREE_PREEMPT_RCU.  This is for stress-testing and experiemental
purposes only, although in theory this would enable 16,777,216
CPUs on 64-bit systems, though only 1,048,576 CPUs on 32-bit
systems. Normal experimental use of this fourth level will
normally set CONFIG_RCU_FANOUT=2, requiring a 16-CPU system,
though the more adventurous (and more fortunate) experimenters
may wish to chose CONFIG_RCU_FANOUT=3 for 81-CPU systems or even
CONFIG_RCU_FANOUT=4 for 256-CPU systems.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12597846161257-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>

diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index a9f5103..d47e03e 100644 (file)
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -60,7 +60,8 @@ static struct lock_class_key rcu_node_class[NUM_RCU_LVLS];
                NUM_RCU_LVL_0,  /* root of hierarchy. */ \
                NUM_RCU_LVL_1, \
                NUM_RCU_LVL_2, \
-               NUM_RCU_LVL_3, /* == MAX_RCU_LVLS */ \
+               NUM_RCU_LVL_3, \
+               NUM_RCU_LVL_4, /* == MAX_RCU_LVLS */ \
        }, \
        .signaled = RCU_GP_IDLE, \
        .gpnum = -300, \
@@ -1877,6 +1878,9 @@ void __init rcu_init(void)
 #ifdef CONFIG_RCU_CPU_STALL_DETECTOR
        printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
 #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+#if NUM_RCU_LVL_4 != 0
+       printk(KERN_INFO "Experimental four-level hierarchy is enabled.\n");
+#endif /* #if NUM_RCU_LVL_4 != 0 */
        RCU_INIT_FLAVOR(&rcu_sched_state, rcu_sched_data);
        RCU_INIT_FLAVOR(&rcu_bh_state, rcu_bh_data);
        __rcu_init_preempt();

diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 8bb03cb..df2e0b6 100644 (file)
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -34,10 +34,11 @@
  * In practice, this has not been tested, so there is probably some
  * bug somewhere.
  */
-#define MAX_RCU_LVLS 3
+#define MAX_RCU_LVLS 4
 #define RCU_FANOUT           (CONFIG_RCU_FANOUT)
 #define RCU_FANOUT_SQ        (RCU_FANOUT * RCU_FANOUT)
 #define RCU_FANOUT_CUBE              (RCU_FANOUT_SQ * RCU_FANOUT)
+#define RCU_FANOUT_FOURTH     (RCU_FANOUT_CUBE * RCU_FANOUT)
 
 #if NR_CPUS <= RCU_FANOUT
 #  define NUM_RCU_LVLS       1
@@ -45,23 +46,33 @@
 #  define NUM_RCU_LVL_1              (NR_CPUS)
 #  define NUM_RCU_LVL_2              0
 #  define NUM_RCU_LVL_3              0
+#  define NUM_RCU_LVL_4              0
 #elif NR_CPUS <= RCU_FANOUT_SQ
 #  define NUM_RCU_LVLS       2
 #  define NUM_RCU_LVL_0              1
 #  define NUM_RCU_LVL_1              DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
 #  define NUM_RCU_LVL_2              (NR_CPUS)
 #  define NUM_RCU_LVL_3              0
+#  define NUM_RCU_LVL_4              0
 #elif NR_CPUS <= RCU_FANOUT_CUBE
 #  define NUM_RCU_LVLS       3
 #  define NUM_RCU_LVL_0              1
 #  define NUM_RCU_LVL_1              DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
 #  define NUM_RCU_LVL_2              DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
 #  define NUM_RCU_LVL_3              NR_CPUS
+#  define NUM_RCU_LVL_4              0
+#elif NR_CPUS <= RCU_FANOUT_FOURTH
+#  define NUM_RCU_LVLS       4
+#  define NUM_RCU_LVL_0              1
+#  define NUM_RCU_LVL_1              DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_CUBE)
+#  define NUM_RCU_LVL_2              DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
+#  define NUM_RCU_LVL_3              DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
+#  define NUM_RCU_LVL_4              NR_CPUS
 #else
 # error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
 #endif /* #if (NR_CPUS) <= RCU_FANOUT */
 
-#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3)
+#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3 + NUM_RCU_LVL_4)
 #define NUM_RCU_NODES (RCU_SUM - NR_CPUS)
 
 /*