+Release Date : Thu Nov 16 15:32:35 EST 2006 -
+ Sumant Patro <sumant.patro@lsi.com>
+Current Version : 2.20.5.1 (scsi module), 2.20.2.6 (cmm module)
+Older Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
+
+1. Changes in Initialization to fix kdump failure.
+ Send SYNC command on loading.
+ This command clears the pending commands in the adapter
+ and re-initialize its internal RAID structure.
+ Without this change, megaraid driver either panics or fails to
+ initialize the adapter during kdump's second kernel boot
+ if there are pending commands or interrupts from other devices
+ sharing the same IRQ.
+2. Authors email-id domain name changed from lsil.com to lsi.com.
+ Also modified the MODULE_AUTHOR to megaraidlinux@lsi.com
+
Release Date : Fri May 19 09:31:45 EST 2006 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_mbox.c
- * Version : v2.20.4.9 (Jul 16 2006)
+ * Version : v2.20.5.1 (Nov 16 2006)
*
* Authors:
- * Atul Mukker <Atul.Mukker@lsil.com>
- * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
- * Manoj Jose <Manoj.Jose@lsil.com>
- * Seokmann Ju <Seokmann.Ju@lsil.com>
+ * Atul Mukker <Atul.Mukker@lsi.com>
+ * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsi.com>
+ * Manoj Jose <Manoj.Jose@lsi.com>
+ * Seokmann Ju
*
* List of supported controllers
*
static int megaraid_mbox_get_max_sg(adapter_t *);
static void megaraid_mbox_enum_raid_scsi(adapter_t *);
static void megaraid_mbox_flush_cache(adapter_t *);
+static int megaraid_mbox_fire_sync_cmd(adapter_t *);
static void megaraid_mbox_display_scb(adapter_t *, scb_t *);
static void megaraid_mbox_setup_device_map(adapter_t *);
-MODULE_AUTHOR("sju@lsil.com");
+MODULE_AUTHOR("megaraidlinux@lsi.com");
MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(MEGARAID_VERSION);
goto out_release_regions;
}
- //
- // Setup the rest of the soft state using the library of FW routines
- //
+ /* initialize the mutual exclusion lock for the mailbox */
+ spin_lock_init(&raid_dev->mailbox_lock);
+
+ /* allocate memory required for commands */
+ if (megaraid_alloc_cmd_packets(adapter) != 0)
+ goto out_iounmap;
- // request IRQ and register the interrupt service routine
+ /*
+ * Issue SYNC cmd to flush the pending cmds in the adapter
+ * and initialize its internal state
+ */
+
+ if (megaraid_mbox_fire_sync_cmd(adapter))
+ con_log(CL_ANN, ("megaraid: sync cmd failed\n"));
+
+ /*
+ * Setup the rest of the soft state using the library of
+ * FW routines
+ */
+
+ /* request IRQ and register the interrupt service routine */
if (request_irq(adapter->irq, megaraid_isr, IRQF_SHARED, "megaraid",
adapter)) {
con_log(CL_ANN, (KERN_WARNING
"megaraid: Couldn't register IRQ %d!\n", adapter->irq));
+ goto out_alloc_cmds;
- goto out_iounmap;
- }
-
-
- // initialize the mutual exclusion lock for the mailbox
- spin_lock_init(&raid_dev->mailbox_lock);
-
- // allocate memory required for commands
- if (megaraid_alloc_cmd_packets(adapter) != 0) {
- goto out_free_irq;
}
// Product info
- if (megaraid_mbox_product_info(adapter) != 0) {
- goto out_alloc_cmds;
- }
+ if (megaraid_mbox_product_info(adapter) != 0)
+ goto out_free_irq;
// Do we support extended CDBs
adapter->max_cdb_sz = 10;
* Allocate resources required to issue FW calls, when sysfs is
* accessed
*/
- if (megaraid_sysfs_alloc_resources(adapter) != 0) {
- goto out_alloc_cmds;
- }
+ if (megaraid_sysfs_alloc_resources(adapter) != 0)
+ goto out_free_irq;
// Set the DMA mask to 64-bit. All supported controllers as capable of
// DMA in this range
out_free_sysfs_res:
megaraid_sysfs_free_resources(adapter);
-out_alloc_cmds:
- megaraid_free_cmd_packets(adapter);
out_free_irq:
free_irq(adapter->irq, adapter);
+out_alloc_cmds:
+ megaraid_free_cmd_packets(adapter);
out_iounmap:
iounmap(raid_dev->baseaddr);
out_release_regions:
/**
+ * megaraid_mbox_fire_sync_cmd - fire the sync cmd
+ * @param adapter : soft state for the controller
+ *
+ * Clears the pending cmds in FW and reinits its RAID structs
+ */
+static int
+megaraid_mbox_fire_sync_cmd(adapter_t *adapter)
+{
+ mbox_t *mbox;
+ uint8_t raw_mbox[sizeof(mbox_t)];
+ mraid_device_t *raid_dev = ADAP2RAIDDEV(adapter);
+ mbox64_t *mbox64;
+ int status = 0;
+ int i;
+ uint32_t dword;
+
+ mbox = (mbox_t *)raw_mbox;
+
+ memset((caddr_t)raw_mbox, 0, sizeof(mbox_t));
+
+ raw_mbox[0] = 0xFF;
+
+ mbox64 = raid_dev->mbox64;
+ mbox = raid_dev->mbox;
+
+ /* Wait until mailbox is free */
+ if (megaraid_busywait_mbox(raid_dev) != 0) {
+ status = 1;
+ goto blocked_mailbox;
+ }
+
+ /* Copy mailbox data into host structure */
+ memcpy((caddr_t)mbox, (caddr_t)raw_mbox, 16);
+ mbox->cmdid = 0xFE;
+ mbox->busy = 1;
+ mbox->poll = 0;
+ mbox->ack = 0;
+ mbox->numstatus = 0;
+ mbox->status = 0;
+
+ wmb();
+ WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
+
+ /* Wait for maximum 1 min for status to post.
+ * If the Firmware SUPPORTS the ABOVE COMMAND,
+ * mbox->cmd will be set to 0
+ * else
+ * the firmware will reject the command with
+ * mbox->numstatus set to 1
+ */
+
+ i = 0;
+ status = 0;
+ while (!mbox->numstatus && mbox->cmd == 0xFF) {
+ rmb();
+ msleep(1);
+ i++;
+ if (i > 1000 * 60) {
+ status = 1;
+ break;
+ }
+ }
+ if (mbox->numstatus == 1)
+ status = 1; /*cmd not supported*/
+
+ /* Check for interrupt line */
+ dword = RDOUTDOOR(raid_dev);
+ WROUTDOOR(raid_dev, dword);
+ WRINDOOR(raid_dev,2);
+
+ return status;
+
+blocked_mailbox:
+ con_log(CL_ANN, (KERN_WARNING "megaraid: blocked mailbox\n"));
+ return status;
+}
+
+/**
* megaraid_mbox_display_scb - display SCB information, mostly debug purposes
* @param adapter : controllers' soft state
* @param scb : SCB to be displayed
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff