machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_OMAP1) := omap1
machine-$(CONFIG_ARCH_OMAP2) := omap2
+ machine-$(CONFIG_ARCH_OMAP3) := omap2
plat-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx
bool "OMAP2430 support"
depends on ARCH_OMAP24XX
+config ARCH_OMAP34XX
+ bool "OMAP34xx Based System"
+ depends on ARCH_OMAP3
+
+config ARCH_OMAP3430
+ bool "OMAP3430 support"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select ARCH_OMAP_OTG
+
comment "OMAP Board Type"
- depends on ARCH_OMAP2
+ depends on ARCH_OMAP2 || ARCH_OMAP3
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
+obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
# Power Management
ifeq ($(CONFIG_PM),y)
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+ if (cpu_is_omap34xx()) {
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
+ }
+
/* caller is expected to have initialized CONFIG1 to cover
* at least sync vs async
*/
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
-static struct map_desc omap2_io_desc[] __initdata = {
+
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
.pfn = __phys_to_pfn(L3_24XX_PHYS),
.type = MT_DEVICE
},
{
- .virtual = L4_24XX_VIRT,
- .pfn = __phys_to_pfn(L4_24XX_PHYS),
- .length = L4_24XX_SIZE,
- .type = MT_DEVICE
+ .virtual = L4_24XX_VIRT,
+ .pfn = __phys_to_pfn(L4_24XX_PHYS),
+ .length = L4_24XX_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+#ifdef CONFIG_ARCH_OMAP2420
+static struct map_desc omap242x_io_desc[] __initdata = {
+ {
+ .virtual = DSP_MEM_24XX_VIRT,
+ .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
+ .length = DSP_MEM_24XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = DSP_IPI_24XX_VIRT,
+ .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
+ .length = DSP_IPI_24XX_SIZE,
+ .type = MT_DEVICE
},
+ {
+ .virtual = DSP_MMU_24XX_VIRT,
+ .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
+ .length = DSP_MMU_24XX_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+#endif
+
#ifdef CONFIG_ARCH_OMAP2430
+static struct map_desc omap243x_io_desc[] __initdata = {
{
.virtual = L4_WK_243X_VIRT,
.pfn = __phys_to_pfn(L4_WK_243X_PHYS),
.length = OMAP243X_GPMC_SIZE,
.type = MT_DEVICE
},
+ {
+ .virtual = OMAP243X_SDRC_VIRT,
+ .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
+ .length = OMAP243X_SDRC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP243X_SMS_VIRT,
+ .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
+ .length = OMAP243X_SMS_SIZE,
+ .type = MT_DEVICE
+ },
+};
#endif
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct map_desc omap34xx_io_desc[] __initdata = {
{
- .virtual = DSP_MEM_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
- .length = DSP_MEM_24XX_SIZE,
+ .virtual = L3_34XX_VIRT,
+ .pfn = __phys_to_pfn(L3_34XX_PHYS),
+ .length = L3_34XX_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_IPI_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS),
- .length = DSP_IPI_24XX_SIZE,
+ .virtual = L4_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_34XX_PHYS),
+ .length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
- .virtual = DSP_MMU_24XX_VIRT,
- .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS),
- .length = DSP_MMU_24XX_SIZE,
+ .virtual = L4_WK_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_34XX_PHYS),
+ .length = L4_WK_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP34XX_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
+ .length = OMAP34XX_GPMC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP343X_SMS_VIRT,
+ .pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
+ .length = OMAP343X_SMS_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP343X_SDRC_VIRT,
+ .pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
+ .length = OMAP343X_SDRC_SIZE,
.type = MT_DEVICE
- }
+ },
+ {
+ .virtual = L4_PER_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
+ .length = L4_PER_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_EMU_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
+ .length = L4_EMU_34XX_SIZE,
+ .type = MT_DEVICE
+ },
};
+#endif
void __init omap2_map_common_io(void)
{
- iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc));
+#if defined(CONFIG_ARCH_OMAP2420)
+ iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+ iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+ iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
+ iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+ iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
-/*
- * Need to Fix this for 2430
- */
-#ifndef CONFIG_ARCH_OMAP2430
omap2_init_memory();
-#endif
gpmc_init();
}
if (cpu_is_omap24xx())
bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+ else if (cpu_is_omap34xx())
+ bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
omap_irq_bank_init_one(bank);
return prev;
}
+#if !defined(CONFIG_ARCH_OMAP2)
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock)
+{
+}
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type)
+{
+}
+#endif
+
void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
{
u32 l;
+ if (!cpu_is_omap2420())
+ return;
+
l = sms_read_reg(SMS_SYSCONFIG);
l &= ~(0x3 << 3);
l |= (0x2 << 3);
/* TLL - HSUSB: 12-pin TLL Port 1*/
MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
/* TLL - HSUSB: 12-pin TLL Port 2*/
MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
- OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
/* TLL - HSUSB: 12-pin TLL Port 3*/
MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
- OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+
+/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
+ OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
+
+/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
+MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
+ OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
+
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap3/sram.S
+ *
+ * Omap3 specific functions that need to be run in internal SRAM
+ *
+ * (C) Copyright 2007
+ * Texas Instruments Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+#include <mach/io.h>
+
+#include "sdrc.h"
+#include "cm.h"
+
+ .text
+
+/*
+ * Change frequency of core dpll
+ * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ */
+ENTRY(omap3_sram_configure_core_dpll)
+ stmfd sp!, {r1-r12, lr} @ store regs to stack
+ cmp r3, #0x2
+ blne configure_sdrc
+ cmp r3, #0x2
+ blne lock_dll
+ cmp r3, #0x1
+ blne unlock_dll
+ bl sdram_in_selfrefresh @ put the SDRAM in self refresh
+ bl configure_core_dpll
+ bl enable_sdrc
+ cmp r3, #0x1
+ blne wait_dll_unlock
+ cmp r3, #0x2
+ blne wait_dll_lock
+ cmp r3, #0x1
+ blne configure_sdrc
+ mov r0, #0 @ return value
+ ldmfd sp!, {r1-r12, pc} @ restore regs and return
+unlock_dll:
+ ldr r4, omap3_sdrc_dlla_ctrl
+ ldr r5, [r4]
+ orr r5, r5, #0x4
+ str r5, [r4]
+ bx lr
+lock_dll:
+ ldr r4, omap3_sdrc_dlla_ctrl
+ ldr r5, [r4]
+ bic r5, r5, #0x4
+ str r5, [r4]
+ bx lr
+sdram_in_selfrefresh:
+ mov r5, #0x0 @ Move 0 to R5
+ mcr p15, 0, r5, c7, c10, 5 @ memory barrier
+ ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+ ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
+ ldr r5, [r4]
+ bic r5, r5, #0x2 @ disable iclk bit for SRDC
+ str r5, [r4]
+wait_sdrc_idle:
+ ldr r4, omap3_cm_idlest1_core
+ ldr r5, [r4]
+ and r5, r5, #0x2 @ check for SDRC idle
+ cmp r5, #2
+ bne wait_sdrc_idle
+ bx lr
+configure_core_dpll:
+ ldr r4, omap3_cm_clksel1_pll
+ ldr r5, [r4]
+ ldr r6, core_m2_mask_val @ modify m2 for core dpll
+ and r5, r5, r6
+ orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
+ str r5, [r4]
+ mov r5, #0x800 @ wait for the clock to stabilise
+ cmp r3, #2
+ bne wait_clk_stable
+ bx lr
+wait_clk_stable:
+ subs r5, r5, #1
+ bne wait_clk_stable
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bx lr
+enable_sdrc:
+ ldr r4, omap3_cm_iclken1_core
+ ldr r5, [r4]
+ orr r5, r5, #0x2 @ enable iclk bit for SDRC
+ str r5, [r4]
+wait_sdrc_idle1:
+ ldr r4, omap3_cm_idlest1_core
+ ldr r5, [r4]
+ and r5, r5, #0x2
+ cmp r5, #0
+ bne wait_sdrc_idle1
+ ldr r4, omap3_sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+ bx lr
+wait_dll_lock:
+ ldr r4, omap3_sdrc_dlla_status
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x4
+ bne wait_dll_lock
+ bx lr
+wait_dll_unlock:
+ ldr r4, omap3_sdrc_dlla_status
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x0
+ bne wait_dll_unlock
+ bx lr
+configure_sdrc:
+ ldr r4, omap3_sdrc_rfr_ctrl
+ str r0, [r4]
+ ldr r4, omap3_sdrc_actim_ctrla
+ str r1, [r4]
+ ldr r4, omap3_sdrc_actim_ctrlb
+ str r2, [r4]
+ bx lr
+
+omap3_sdrc_power:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+omap3_cm_clksel1_pll:
+ .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
+omap3_cm_idlest1_core:
+ .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
+omap3_cm_iclken1_core:
+ .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
+omap3_sdrc_rfr_ctrl:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
+omap3_sdrc_actim_ctrla:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
+omap3_sdrc_actim_ctrlb:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_dlla_status:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+omap3_sdrc_dlla_ctrl:
+ .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
+core_m2_mask_val:
+ .word 0x07FFFFFF
+
+ENTRY(omap3_sram_configure_core_dpll_sz)
+ .word . - omap3_sram_configure_core_dpll
config ARCH_OMAP2
bool "TI OMAP2"
+config ARCH_OMAP3
+ bool "TI OMAP3"
+
endchoice
comment "OMAP Feature Selections"
config OMAP_32K_TIMER
bool "Use 32KHz timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX and 24XX.
+ currently only available for OMAP16XX, 24XX and 34XX.
endchoice
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to use OMAP Dual-Mode timers.
static void omap_init_kp(void)
{
+ /* 2430 and 34xx keypad is on TWL4030 */
+ if (cpu_is_omap2430() || cpu_is_omap34xx())
+ return;
+
if (machine_is_omap_h2() || machine_is_omap_h3()) {
omap_cfg_reg(F18_1610_KBC0);
omap_cfg_reg(D20_1610_KBC1);
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP_WDT_BASE 0x48314000
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#ifdef CONFIG_ARCH_OMAP2430
+/* WDT2 */
+#define OMAP_WDT_BASE 0x49016000
+#else
#define OMAP_WDT_BASE 0x48022000
+#endif
+
#else
#define OMAP_WDT_BASE 0xfffeb000
#endif
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
add \rx, \rx, #0x00004000 @ UART 3
#endif
+
+#elif CONFIG_ARCH_OMAP3
+ moveq \rx, #0x48000000 @ physical base address
+ movne \rx, #0xd8000000 @ virtual base
+ orr \rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+ add \rx, \rx, #0x00002000 @ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+ add \rx, \rx, #0x00fb0000 @ UART 3
+ add \rx, \rx, #0x00006000
+#endif
#endif
.endm
1510:
.endm
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX)
#include <mach/omap24xx.h>
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+#include <mach/omap34xx.h>
+#endif
+
+#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */
.macro disable_fiq
.endm
ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
cmp \irqnr, #0x0
2222:
- ldrne \irqnr, [\base, #IRQ_SIR_IRQ]
+ ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
.endm
u16 access; /* Start-cycle to first data valid delay */
u16 rd_cycle; /* Total read cycle time */
u16 wr_cycle; /* Total write cycle time */
+
+ /* The following are only on OMAP3430 */
+ u16 wr_access; /* WRACCESSTIME */
+ u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
};
extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
#define L4_24XX_VIRT 0xd8000000
#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
-#ifdef CONFIG_ARCH_OMAP2430
#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
#define L4_WK_243X_VIRT 0xd9000000
#define L4_WK_243X_SIZE SZ_1M
#define OMAP243X_SMS_VIRT 0xFC000000
#define OMAP243X_SMS_SIZE SZ_1M
-#endif
-
#define IO_OFFSET 0x90000000
#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define INT_24XX_USB_IRQ_OTG 80
#define INT_24XX_MMC_IRQ 83
+#define INT_34XX_BENCH_MPU_EMUL 3
+#define INT_34XX_ST_MCBSP2_IRQ 4
+#define INT_34XX_ST_MCBSP3_IRQ 5
+#define INT_34XX_SSM_ABORT_IRQ 6
+#define INT_34XX_SYS_NIRQ 7
+#define INT_34XX_D2D_FW_IRQ 8
+#define INT_34XX_PRCM_MPU_IRQ 11
+#define INT_34XX_MCBSP1_IRQ 16
+#define INT_34XX_MCBSP2_IRQ 17
+#define INT_34XX_MCBSP3_IRQ 22
+#define INT_34XX_MCBSP4_IRQ 23
+#define INT_34XX_CAM_IRQ 24
+#define INT_34XX_MCBSP5_IRQ 27
+#define INT_34XX_GPIO_BANK1 29
+#define INT_34XX_GPIO_BANK2 30
+#define INT_34XX_GPIO_BANK3 31
+#define INT_34XX_GPIO_BANK4 32
+#define INT_34XX_GPIO_BANK5 33
+#define INT_34XX_GPIO_BANK6 34
+#define INT_34XX_USIM_IRQ 35
+#define INT_34XX_WDT3_IRQ 36
+#define INT_34XX_SPI4_IRQ 48
+#define INT_34XX_SHA1MD52_IRQ 49
+#define INT_34XX_FPKA_READY_IRQ 50
+#define INT_34XX_SHA1MD51_IRQ 51
+#define INT_34XX_RNG_IRQ 52
+#define INT_34XX_I2C3_IRQ 61
+#define INT_34XX_FPKA_ERROR_IRQ 64
+#define INT_34XX_PBIAS_IRQ 75
+#define INT_34XX_OHCI_IRQ 76
+#define INT_34XX_EHCI_IRQ 77
+#define INT_34XX_TLL_IRQ 78
+#define INT_34XX_PARTHASH_IRQ 79
+#define INT_34XX_MMC3_IRQ 94
+#define INT_34XX_GPT12_IRQ 95
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x04
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#define PHYS_OFFSET UL(0x80000000)
#endif
AB12_3430_USB3HS_TLL_DATA4,
AB13_3430_USB3HS_TLL_DATA5,
AA13_3430_USB3HS_TLL_DATA6,
- AA12_3430_USB3HS_TLL_DATA7
+ AA12_3430_USB3HS_TLL_DATA7,
+
+ /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+ AF10_3430_USB1FS_PHY_MM1_RXDP,
+ AG9_3430_USB1FS_PHY_MM1_RXDM,
+ W13_3430_USB1FS_PHY_MM1_RXRCV,
+ W12_3430_USB1FS_PHY_MM1_TXSE0,
+ W11_3430_USB1FS_PHY_MM1_TXDAT,
+ Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+ /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+ AF7_3430_USB2FS_PHY_MM2_RXDP,
+ AH7_3430_USB2FS_PHY_MM2_RXDM,
+ AB10_3430_USB2FS_PHY_MM2_RXRCV,
+ AB9_3430_USB2FS_PHY_MM2_TXSE0,
+ W3_3430_USB2FS_PHY_MM2_TXDAT,
+ T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+ /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+ AH3_3430_USB3FS_PHY_MM3_RXDP,
+ AE3_3430_USB3FS_PHY_MM3_RXDM,
+ AD1_3430_USB3FS_PHY_MM3_RXRCV,
+ AE1_3430_USB3FS_PHY_MM3_TXSE0,
+ AD2_3430_USB3FS_PHY_MM3_TXDAT,
+ AC1_3430_USB3FS_PHY_MM3_TXEN_N,
};
/* interrupt controller */
#define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000)
#define OMAP24XX_IVA_INTC_BASE 0x40000000
-#define IRQ_SIR_IRQ 0x0040
#define OMAP2420_CTRL_BASE L4_24XX_BASE
#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
-#define SDRC_ACTIM_CTRL_A 0x09c
-#define SDRC_ACTIM_CTRL_B 0x0a0
+#define SDRC_ACTIM_CTRL_A_0 0x09c
+#define SDRC_ACTIM_CTRL_B_0 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
+ u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb, u32 m2);
+
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap1_sram_reprogram_clock_sz;
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
+ u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb, u32 m2);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
#endif
static inline void arch_reset(char mode)
{
- if (!cpu_is_omap24xx())
+ if (!cpu_class_is_omap2())
omap1_arch_reset(mode);
else
omap_prcm_arch_reset(mode);
}
#endif
#ifdef CONFIG_ARCH_OMAP2
- if (cpu_class_is_omap2()) {
+ if (cpu_is_omap24xx()) {
if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE))
return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT);
if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE))
return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
+ }
+ if (cpu_is_omap2420()) {
if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
}
-#ifdef CONFIG_ARCH_OMAP2430
if (cpu_is_omap2430()) {
if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
- return XLATE(L4_WK_243X_PHYS, L4_WK_243X_VIRT);
+ return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT);
if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE))
- return XLATE(OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
+ return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT);
+ if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE))
+ return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT);
+ if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE))
+ return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT);
}
#endif
+#ifdef CONFIG_ARCH_OMAP3
+ if (cpu_is_omap34xx()) {
+ if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
+ return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
+ if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
+ return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
+ if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE))
+ return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT);
+ if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
+ return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
+ if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
+ return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT);
+ if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE))
+ return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT);
+ if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE))
+ return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT);
+ if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE))
+ return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
+ }
#endif
return __arm_ioremap(p, size, type);
#define omap1_sram_init() do {} while (0)
#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2)
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock);
#ifdef CONFIG_ARCH_OMAP3
-static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level);
-u32 omap2_sram_reprogram_gpmc(u32 perf_level)
-{
- if (!_omap2_sram_reprogram_gpmc)
- omap_sram_error();
-
- return _omap2_sram_reprogram_gpmc(perf_level);
-}
-
-static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n,
- u32 freqsel, u32 m2);
-u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2)
+static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
+ u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb,
+ u32 m2);
+u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
+ u32 sdrc_actim_ctrlb, u32 m2)
{
- if (!_omap2_sram_configure_core_dpll)
+ if (!_omap3_sram_configure_core_dpll)
omap_sram_error();
- return _omap2_sram_configure_core_dpll(m, n, freqsel, m2);
+ return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
+ sdrc_actim_ctrla,
+ sdrc_actim_ctrlb, m2);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
- _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
- omap34xx_sram_reprogram_gpmc_sz);
-
- _omap2_sram_configure_core_dpll =
- omap_sram_push(omap34xx_sram_configure_core_dpll,
- omap34xx_sram_configure_core_dpll_sz);
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
}
int __init omap34xx_sram_init(void)
{
- _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init,
- omap34xx_sram_ddr_init_sz);
-
- _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc,
- omap34xx_sram_reprogram_sdrc_sz);
-
- _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm,
- omap34xx_sram_set_prcm_sz);
-
- _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc,
- omap34xx_sram_reprogram_gpmc_sz);
-
- _omap2_sram_configure_core_dpll =
- omap_sram_push(omap34xx_sram_configure_core_dpll,
- omap34xx_sram_configure_core_dpll_sz);
+ _omap3_sram_configure_core_dpll =
+ omap_sram_push(omap3_sram_configure_core_dpll,
+ omap3_sram_configure_core_dpll_sz);
return 0;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff