pca100: add sound support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-mx2/mach-pca100.c
index cda52a6..d12bdb1 100644 (file)
--- a/arch/arm/mach-mx2/mach-pca100.c
+++ b/arch/arm/mach-mx2/mach-pca100.c
@@ -25,6 +25,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/irq.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -41,6 +42,8 @@
 #include <mach/spi.h>
 #endif
 #include <mach/imx-uart.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
 #include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/mmc.h>
@@ -193,6 +196,37 @@ static struct spi_imx_master pca100_spi_0_data = {
 };
 #endif
 
+static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+       mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
+       gpio_set_value(GPIO_PORTC + 20, 1);
+       udelay(2);
+       gpio_set_value(GPIO_PORTC + 20, 0);
+       mxc_gpio_mode(PC20_PF_SSI1_FS);
+       msleep(2);
+}
+
+static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+       mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
+       gpio_set_value(GPIO_PORTC + 20, 0);
+       mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
+       gpio_set_value(GPIO_PORTC + 22, 0);
+       mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
+       gpio_set_value(GPIO_PORTC + 28, 0);
+       udelay(10);
+       gpio_set_value(GPIO_PORTC + 28, 1);
+       mxc_gpio_mode(PC20_PF_SSI1_FS);
+       mxc_gpio_mode(PC22_PF_SSI1_TXD);
+       msleep(2);
+}
+
+static struct imx_ssi_platform_data pca100_ssi_pdata = {
+       .ac97_reset             = pca100_ac97_cold_reset,
+       .ac97_warm_reset        = pca100_ac97_warm_reset,
+       .flags                  = IMX_SSI_USE_AC97,
+};
+
 static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
                void *data)
 {
@@ -266,11 +300,25 @@ static void __init pca100_init(void)
 {
        int ret;
 
+       /* SSI unit */
+       mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+                                 MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+                                 MXC_AUDMUX_V1_PCR_TFCSEL(3) |
+                                 MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+                                 MXC_AUDMUX_V1_PCR_RXDSEL(3));
+       mxc_audmux_v1_configure_port(3,
+                                 MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+                                 MXC_AUDMUX_V1_PCR_TFCSEL(0) |
+                                 MXC_AUDMUX_V1_PCR_TFSDIR |
+                                 MXC_AUDMUX_V1_PCR_RXDSEL(0));
+
        ret = mxc_gpio_setup_multiple_pins(pca100_pins,
                        ARRAY_SIZE(pca100_pins), "PCA100");
        if (ret)
                printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
+       mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+
        mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
        mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);