drivers/media/: Spelling fixes
authorJoe Perches <joe@perches.com>
Sun, 3 Feb 2008 15:18:59 +0000 (17:18 +0200)
committerAdrian Bunk <bunk@kernel.org>
Sun, 3 Feb 2008 15:18:59 +0000 (17:18 +0200)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
13 files changed:
drivers/media/common/saa7146_core.c
drivers/media/dvb/dvb-core/dvb_net.c
drivers/media/video/bt8xx/bttv-cards.c
drivers/media/video/indycam.c
drivers/media/video/mt20xx.c
drivers/media/video/pvrusb2/pvrusb2.h
drivers/media/video/tea6420.c
drivers/media/video/usbvideo/quickcam_messenger.c
drivers/media/video/usbvision/usbvision-video.c
drivers/media/video/vpx3220.c
drivers/media/video/zoran_card.c
drivers/media/video/zr36050.c
drivers/media/video/zr36060.c

index 7d04a6f..168a8d3 100644 (file)
@@ -388,7 +388,7 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent
        }
        dev->revision &= 0xf;
 
-       /* remap the memory from virtual to physical adress */
+       /* remap the memory from virtual to physical address */
 
        err = pci_request_region(pci, 0, "saa7146");
        if (err < 0)
index a33eb59..ed3f826 100644 (file)
@@ -681,7 +681,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
                                                        drop = 1;
                                                /* else: destination address matches the MAC address of our receiver device */
                                        }
-                                       /* else: promiscious mode; pass everything up the stack */
+                                       /* else: promiscuous mode; pass everything up the stack */
 
                                        if (drop) {
 #ifdef ULE_DEBUG
index 63a47cd..7374c02 100644 (file)
@@ -4344,7 +4344,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input)
        gpio_bits(0x200,0x000);
        mdelay(1);
 
-       /* create a new conection */
+       /* create a new connection */
        gpio_bits(0x480,0x080);
        gpio_bits(0x480,0x480);
        mdelay(1);
index 5c2c402..84b9e4f 100644 (file)
@@ -326,7 +326,7 @@ static int indycam_attach(struct i2c_adapter *adap, int addr, int kind)
        // initialize
        err = indycam_write_block(client, 0, sizeof(initseq), (u8 *)&initseq);
        if (err) {
-               printk(KERN_ERR "IndyCam initalization failed\n");
+               printk(KERN_ERR "IndyCam initialization failed\n");
                err = -EIO;
                goto out_detach_client;
        }
index b630c26..58bab65 100644 (file)
@@ -369,7 +369,7 @@ static struct dvb_tuner_ops mt2032_tuner_ops = {
        .get_frequency     = microtune_get_frequency,
 };
 
-// Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
+// Initialization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
 static int mt2032_init(struct dvb_frontend *fe)
 {
        struct microtune_priv *priv = fe->tuner_priv;
index 074533e..1a9a4ba 100644 (file)
@@ -27,7 +27,7 @@
    might want to increase this - however the driver operation will not
    be impaired if it is too small.  Instead additional units just
    won't have an ID assigned and it might not be possible to specify
-   module paramters for those extra units. */
+   module parameters for those extra units. */
 #define PVR_NUM 20
 
 #endif /* __PVRUSB2_H */
index e0ff811..ca05cd6 100644 (file)
@@ -57,7 +57,7 @@ static int tea6420_switch(struct i2c_client *client, int i, int o, int g)
 
        dprintk("adr:0x%02x, i:%d, o:%d, g:%d\n", client->addr, i, o, g);
 
-       /* check if the paramters are valid */
+       /* check if the parameters are valid */
        if (i < 1 || i > 6 || o < 1 || o > 4 || g < 0 || g > 6 || g % 2 != 0)
                return -1;
 
index d847273..5e7b795 100644 (file)
@@ -258,7 +258,7 @@ static void qcm_hsv2rgb(u16 hue, u16 sat, u16 val, u16 *r, u16 *g, u16 *b)
        unsigned int p;
 
        /*
-       the registers controling gain are 8 bit of which
+       the registers controlling gain are 8 bit of which
        we affect only the last 4 bits with our gain.
        we know that if saturation is 0, (unsaturated) then
        we're grayscale (center axis of the colour cone) so
index b52b826..df52f8a 100644 (file)
@@ -131,7 +131,7 @@ static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
 /* Function prototypes */
 static void usbvision_release(struct usb_usbvision *usbvision);
 
-/* Default initalization of device driver parameters */
+/* Default initialization of device driver parameters */
 /* Set the default format for ISOC endpoint */
 static int isocMode = ISOC_MODE_COMPRESS;
 /* Set the default Debug Mode of the device driver */
index 8ef31ed..a913385 100644 (file)
@@ -566,7 +566,7 @@ vpx3220_init_client (struct i2c_client *client)
 }
 
 /* -----------------------------------------------------------------------
- * Client managment code
+ * Client management code
  */
 
 /*
index 6e0ac4c..690281b 100644 (file)
@@ -1270,7 +1270,7 @@ zoran_setup_videocodec (struct zoran *zr,
 }
 
 /*
- *   Scan for a Buz card (actually for the PCI contoler ZR36057),
+ *   Scan for a Buz card (actually for the PCI controller ZR36057),
  *   request the irq and map the io memory
  */
 static int __devinit
index 9f622e0..faae4ec 100644 (file)
@@ -161,7 +161,7 @@ zr36050_wait_end (struct zr36050 *ptr)
                udelay(1);
                if (i++ > 200000) {     // 200ms, there is for sure something wrong!!!
                        dprintk(1,
-                               "%s: timout at wait_end (last status: 0x%02x)\n",
+                               "%s: timeout at wait_end (last status: 0x%02x)\n",
                                ptr->name, ptr->status1);
                        break;
                }
index 1ef14fe..7849b65 100644 (file)
@@ -163,7 +163,7 @@ zr36060_wait_end (struct zr36060 *ptr)
                udelay(1);
                if (i++ > 200000) {     // 200ms, there is for sure something wrong!!!
                        dprintk(1,
-                               "%s: timout at wait_end (last status: 0x%02x)\n",
+                               "%s: timeout at wait_end (last status: 0x%02x)\n",
                                ptr->name, ptr->status);
                        break;
                }