phy: Clean up header style

Multi-line comments weren't all CodingStyle compliant

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 6509f37..2d83844 100644 (file)
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -39,7 +39,8 @@
                                 SUPPORTED_1000baseT_Half | \
                                 SUPPORTED_1000baseT_Full)
 
-/* Set phydev->irq to PHY_POLL if interrupts are not supported,
+/*
+ * Set phydev->irq to PHY_POLL if interrupts are not supported,
  * or not desired for this PHY.  Set to PHY_IGNORE_INTERRUPT if
  * the attached driver handles the interrupt
  */
@@ -80,8 +81,10 @@ typedef enum {
  */
 #define MII_BUS_ID_SIZE        (BUS_ID_SIZE - 3)
 
-/* The Bus class for PHYs.  Devices which provide access to
- * PHYs should register using this structure */
+/*
+ * The Bus class for PHYs.  Devices which provide access to
+ * PHYs should register using this structure
+ */
 struct mii_bus {
        const char *name;
        char id[MII_BUS_ID_SIZE];
@@ -90,8 +93,10 @@ struct mii_bus {
        int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
        int (*reset)(struct mii_bus *bus);
 
-       /* A lock to ensure that only one thing can read/write
-        * the MDIO bus at a time */
+       /*
+        * A lock to ensure that only one thing can read/write
+        * the MDIO bus at a time
+        */
        struct mutex mdio_lock;
 
        struct device *dev;
@@ -102,8 +107,10 @@ struct mii_bus {
        /* Phy addresses to be ignored when probing */
        u32 phy_mask;
 
-       /* Pointer to an array of interrupts, each PHY's
-        * interrupt at the index matching its address */
+       /*
+        * Pointer to an array of interrupts, each PHY's
+        * interrupt at the index matching its address
+        */
        int *irq;
 };
 
@@ -255,7 +262,8 @@ struct phy_device {
        /* Bus address of the PHY (0-32) */
        int addr;
 
-       /* forced speed & duplex (no autoneg)
+       /*
+        * forced speed & duplex (no autoneg)
         * partner speed & duplex & pause (autoneg)
         */
        int speed;
@@ -278,8 +286,10 @@ struct phy_device {
 
        int link_timeout;
 
-       /* Interrupt number for this PHY
-        * -1 means no interrupt */
+       /*
+        * Interrupt number for this PHY
+        * -1 means no interrupt
+        */
        int irq;
 
        /* private data pointer */
@@ -329,22 +339,28 @@ struct phy_driver {
        u32 features;
        u32 flags;
 
-       /* Called to initialize the PHY,
-        * including after a reset */
+       /*
+        * Called to initialize the PHY,
+        * including after a reset
+        */
        int (*config_init)(struct phy_device *phydev);
 
-       /* Called during discovery.  Used to set
-        * up device-specific structures, if any */
+       /*
+        * Called during discovery.  Used to set
+        * up device-specific structures, if any
+        */
        int (*probe)(struct phy_device *phydev);
 
        /* PHY Power Management */
        int (*suspend)(struct phy_device *phydev);
        int (*resume)(struct phy_device *phydev);
 
-       /* Configures the advertisement and resets
+       /*
+        * Configures the advertisement and resets
         * autonegotiation if phydev->autoneg is on,
         * forces the speed to the current settings in phydev
-        * if phydev->autoneg is off */
+        * if phydev->autoneg is off
+        */
        int (*config_aneg)(struct phy_device *phydev);
 
        /* Determines the negotiated speed and duplex */