Allow guest to specify syscall vector to use.
authorRusty Russell <rusty@rustcorp.com.au>
Mon, 22 Oct 2007 01:03:35 +0000 (11:03 +1000)
committerRusty Russell <rusty@rustcorp.com.au>
Tue, 23 Oct 2007 05:49:53 +0000 (15:49 +1000)
(Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch).

This patch allows Guests to specify what system call vector they want,
and we try to reserve it.  We only allow one non-Linux system call
vector, to try to avoid DoS on the Host.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
arch/x86/lguest/boot.c
drivers/lguest/core.c
drivers/lguest/interrupts_and_traps.c
drivers/lguest/lg.h
drivers/lguest/x86/core.c
include/linux/lguest.h

index 1040f9b..3a06b51 100644 (file)
@@ -87,6 +87,7 @@ struct lguest_data lguest_data = {
        .noirq_start = (u32)lguest_noirq_start,
        .noirq_end = (u32)lguest_noirq_end,
        .blocked_interrupts = { 1 }, /* Block timer interrupts */
+       .syscall_vec = SYSCALL_VECTOR,
 };
 static cycle_t clock_base;
 
index 02556ba..41b26e5 100644 (file)
@@ -281,37 +281,47 @@ static int __init init(void)
        /* First we put the Switcher up in very high virtual memory. */
        err = map_switcher();
        if (err)
-               return err;
+               goto out;
 
        /* Now we set up the pagetable implementation for the Guests. */
        err = init_pagetables(switcher_page, SHARED_SWITCHER_PAGES);
-       if (err) {
-               unmap_switcher();
-               return err;
-       }
+       if (err)
+               goto unmap;
 
        /* The I/O subsystem needs some things initialized. */
        lguest_io_init();
 
+       /* We might need to reserve an interrupt vector. */
+       err = init_interrupts();
+       if (err)
+               goto free_pgtables;
+
        /* /dev/lguest needs to be registered. */
        err = lguest_device_init();
-       if (err) {
-               free_pagetables();
-               unmap_switcher();
-               return err;
-       }
+       if (err)
+               goto free_interrupts;
 
        /* Finally we do some architecture-specific setup. */
        lguest_arch_host_init();
 
        /* All good! */
        return 0;
+
+free_interrupts:
+       free_interrupts();
+free_pgtables:
+       free_pagetables();
+unmap:
+       unmap_switcher();
+out:
+       return err;
 }
 
 /* Cleaning up is just the same code, backwards.  With a little French. */
 static void __exit fini(void)
 {
        lguest_device_remove();
+       free_interrupts();
        free_pagetables();
        unmap_switcher();
 
index fdefc0a..a57d757 100644 (file)
  * them first, so we also have a way of "reflecting" them into the Guest as if
  * they had been delivered to it directly. :*/
 #include <linux/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
 #include "lg.h"
 
+/* Allow Guests to use a non-128 (ie. non-Linux) syscall trap. */
+static unsigned int syscall_vector = SYSCALL_VECTOR;
+module_param(syscall_vector, uint, 0444);
+
 /* The address of the interrupt handler is split into two bits: */
 static unsigned long idt_address(u32 lo, u32 hi)
 {
@@ -183,6 +189,47 @@ void maybe_do_interrupt(struct lguest *lg)
         * timer interrupt. */
        write_timestamp(lg);
 }
+/*:*/
+
+/* Linux uses trap 128 for system calls.  Plan9 uses 64, and Ron Minnich sent
+ * me a patch, so we support that too.  It'd be a big step for lguest if half
+ * the Plan 9 user base were to start using it.
+ *
+ * Actually now I think of it, it's possible that Ron *is* half the Plan 9
+ * userbase.  Oh well. */
+static bool could_be_syscall(unsigned int num)
+{
+       /* Normal Linux SYSCALL_VECTOR or reserved vector? */
+       return num == SYSCALL_VECTOR || num == syscall_vector;
+}
+
+/* The syscall vector it wants must be unused by Host. */
+bool check_syscall_vector(struct lguest *lg)
+{
+       u32 vector;
+
+       if (get_user(vector, &lg->lguest_data->syscall_vec))
+               return false;
+
+       return could_be_syscall(vector);
+}
+
+int init_interrupts(void)
+{
+       /* If they want some strange system call vector, reserve it now */
+       if (syscall_vector != SYSCALL_VECTOR
+           && test_and_set_bit(syscall_vector, used_vectors)) {
+               printk("lg: couldn't reserve syscall %u\n", syscall_vector);
+               return -EBUSY;
+       }
+       return 0;
+}
+
+void free_interrupts(void)
+{
+       if (syscall_vector != SYSCALL_VECTOR)
+               clear_bit(syscall_vector, used_vectors);
+}
 
 /*H:220 Now we've got the routines to deliver interrupts, delivering traps
  * like page fault is easy.  The only trick is that Intel decided that some
@@ -224,7 +271,7 @@ static int direct_trap(unsigned int num)
 {
        /* Hardware interrupts don't go to the Guest at all (except system
         * call). */
-       if (num >= FIRST_EXTERNAL_VECTOR && num != SYSCALL_VECTOR)
+       if (num >= FIRST_EXTERNAL_VECTOR && !could_be_syscall(num))
                return 0;
 
        /* The Host needs to see page faults (for shadow paging and to save the
index f921684..7408ceb 100644 (file)
@@ -141,6 +141,9 @@ void copy_traps(const struct lguest *lg, struct desc_struct *idt,
                const unsigned long *def);
 void guest_set_clockevent(struct lguest *lg, unsigned long delta);
 void init_clockdev(struct lguest *lg);
+bool check_syscall_vector(struct lguest *lg);
+int init_interrupts(void);
+void free_interrupts(void);
 
 /* segments.c: */
 void setup_default_gdt_entries(struct lguest_ro_state *state);
index 84c0908..a125109 100644 (file)
@@ -530,6 +530,10 @@ int lguest_arch_init_hypercalls(struct lguest *lg)
        if (put_user(tsc_speed, &lg->lguest_data->tsc_khz))
                return -EFAULT;
 
+       /* The interrupt code might not like the system call vector. */
+       if (!check_syscall_vector(lg))
+               kill_guest(lg, "bad syscall vector");
+
        return 0;
 }
 /* Now we've examined the hypercall code; our Guest can make requests.  There
index 9ddac2f..0830522 100644 (file)
@@ -48,6 +48,9 @@ struct lguest_data
 /* Fields initialized by the Guest at boot: */
        /* Instruction range to suppress interrupts even if enabled */
        unsigned long noirq_start, noirq_end;
+
+       /* The vector to try to use for system calls (0x40 or 0x80). */
+       unsigned int syscall_vec;
 };
 extern struct lguest_data lguest_data;
 #endif /* __ASSEMBLY__ */