* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (119 commits)
ACPI: don't pass handle for fixed hardware notifications
ACPI: remove null pointer checks in deferred execution path
ACPI: simplify deferred execution path
acerhdf: additional BIOS versions
acerhdf: convert to dev_pm_ops
acerhdf: fix fan control for AOA150 model
thermal: add missing Kconfig dependency
acpi: switch /proc/acpi/{debug_layer,debug_level} to seq_file
hp-wmi: fix rfkill memory leak on unload
ACPI: remove unnecessary #ifdef CONFIG_DMI
ACPI: linux/acpi.h should not include linux/dmi.h
hwmon driver for ACPI 4.0 power meters
topstar-laptop: add new driver for hotkeys support on Topstar N01
thinkpad_acpi: fix rfkill memory leak on unload
thinkpad-acpi: report brightness events when required
thinkpad-acpi: don't poll by default any of the reserved hotkeys
thinkpad-acpi: Fix procfs hotkey reset command
thinkpad-acpi: deprecate hotkey_bios_mask
thinkpad-acpi: hotkey poll fixes
thinkpad-acpi: be more strict when detecting a ThinkPad
...
--- /dev/null
+What: /sys/class/backlight/<backlight>/bl_power
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+ - FB_BLANK_UNBLANK (0) : power on.
+ - FB_BLANK_POWERDOWN (4) : power off
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/brightness
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Control the brightness for this <backlight>. Values
+ are between 0 and max_brightness. This file will also
+ show the brightness level stored in the driver, which
+ may not be the actual brightness (see actual_brightness).
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/actual_brightness
+Date: March 2006
+KernelVersion: 2.6.17
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Show the actual brightness by querying the hardware.
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/max_brightness
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Maximum brightness for <backlight>.
+Users: HAL
--- /dev/null
+What: /sys/class/lcd/<lcd>/lcd_power
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Control LCD power, values are FB_BLANK_* from fb.h
+ - FB_BLANK_UNBLANK (0) : power on.
+ - FB_BLANK_POWERDOWN (4) : power off
+
+What: /sys/class/lcd/<lcd>/contrast
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Current contrast of this LCD device. Value is between 0 and
+ /sys/class/lcd/<lcd>/max_contrast.
+
+What: /sys/class/lcd/<lcd>/max_contrast
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Maximum contrast for this LCD device.
--- /dev/null
+What: /sys/class/leds/<led>/brightness
+Date: March 2006
+KernelVersion: 2.6.17
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Set the brightness of the LED. Most LEDs don't
+ have hardware brightness support so will just be turned on for
+ non-zero brightness settings. The value is between 0 and
+ /sys/class/leds/<led>/max_brightness.
+
+What: /sys/class/leds/<led>/max_brightness
+Date: March 2006
+KernelVersion: 2.6.17
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Maximum brightness level for this led, default is 255 (LED_FULL).
+
+What: /sys/class/leds/<led>/trigger
+Date: March 2006
+KernelVersion: 2.6.17
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Set the trigger for this LED. A trigger is a kernel based source
+ of led events.
+ You can change triggers in a similar manner to the way an IO
+ scheduler is chosen. Trigger specific parameters can appear in
+ /sys/class/leds/<led> once a given trigger is selected.
+
--- /dev/null
+What: /sys/devices/platform/asus-laptop/display
+Date: January 2007
+KernelVersion: 2.6.20
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ This file allows display switching. The value
+ is composed by 4 bits and defined as follow:
+ 4321
+ |||`- LCD
+ ||`-- CRT
+ |`--- TV
+ `---- DVI
+ Ex: - 0 (0000b) means no display
+ - 3 (0011b) CRT+LCD.
+
+What: /sys/devices/platform/asus-laptop/gps
+Date: January 2007
+KernelVersion: 2.6.20
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the gps device. 1 means on, 0 means off.
+Users: Lapsus
+
+What: /sys/devices/platform/asus-laptop/ledd
+Date: January 2007
+KernelVersion: 2.6.20
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Some models like the W1N have a LED display that can be
+ used to display several informations.
+ To control the LED display, use the following :
+ echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
+ where T control the 3 letters display, and DDD the 3 digits display.
+ The DDD table can be found in Documentation/laptops/asus-laptop.txt
+
+What: /sys/devices/platform/asus-laptop/bluetooth
+Date: January 2007
+KernelVersion: 2.6.20
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the bluetooth device. 1 means on, 0 means off.
+ This may control the led, the device or both.
+Users: Lapsus
+
+What: /sys/devices/platform/asus-laptop/wlan
+Date: January 2007
+KernelVersion: 2.6.20
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the bluetooth device. 1 means on, 0 means off.
+ This may control the led, the device or both.
+Users: Lapsus
--- /dev/null
+What: /sys/devices/platform/eeepc-laptop/disp
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ This file allows display switching.
+ - 1 = LCD
+ - 2 = CRT
+ - 3 = LCD+CRT
+ If you run X11, you should use xrandr instead.
+
+What: /sys/devices/platform/eeepc-laptop/camera
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the camera. 1 means on, 0 means off.
+
+What: /sys/devices/platform/eeepc-laptop/cardr
+Date: May 2008
+KernelVersion: 2.6.26
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the card reader. 1 means on, 0 means off.
+
+What: /sys/devices/platform/eeepc-laptop/cpufv
+Date: Jun 2009
+KernelVersion: 2.6.31
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Change CPU clock configuration.
+ On the Eee PC 1000H there are three available clock configuration:
+ * 0 -> Super Performance Mode
+ * 1 -> High Performance Mode
+ * 2 -> Power Saving Mode
+ On Eee PC 701 there is only 2 available clock configurations.
+ Available configuration are listed in available_cpufv file.
+ Reading this file will show the raw hexadecimal value which
+ is defined as follow:
+ | 8 bit | 8 bit |
+ | `---- Current mode
+ `------------ Availables modes
+ For example, 0x301 means: mode 1 selected, 3 available modes.
+
+What: /sys/devices/platform/eeepc-laptop/available_cpufv
+Date: Jun 2009
+KernelVersion: 2.6.31
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ List available cpufv modes.
--- /dev/null
+Kernel driver power_meter
+=========================
+
+This driver talks to ACPI 4.0 power meters.
+
+Supported systems:
+ * Any recent system with ACPI 4.0.
+ Prefix: 'power_meter'
+ Datasheet: http://acpi.info/, section 10.4.
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements sensor reading support for the power meters exposed in
+the ACPI 4.0 spec (Chapter 10.4). These devices have a simple set of
+features--a power meter that returns average power use over a configurable
+interval, an optional capping mechanism, and a couple of trip points. The
+sysfs interface conforms with the specification outlined in the "Power" section
+of Documentation/hwmon/sysfs-interface.
+
+Special Features
+----------------
+
+The power[1-*]_is_battery knob indicates if the power supply is a battery.
+Both power[1-*]_average_{min,max} must be set before the trip points will work.
+When both of them are set, an ACPI event will be broadcast on the ACPI netlink
+socket and a poll notification will be sent to the appropriate
+power[1-*]_average sysfs file.
+
+The power[1-*]_{model_number, serial_number, oem_info} fields display arbitrary
+strings that ACPI provides with the meter. The measures/ directory contains
+symlinks to the devices that this meter measures.
+
+Some computers have the ability to enforce a power cap in hardware. If this is
+the case, the power[1-*]_cap and related sysfs files will appear. When the
+average power consumption exceeds the cap, an ACPI event will be broadcast on
+the netlink event socket and a poll notification will be sent to the
+appropriate power[1-*]_alarm file to indicate that capping has begun, and the
+hardware has taken action to reduce power consumption. Most likely this will
+result in reduced performance.
+
+There are a few other ACPI notifications that can be sent by the firmware. In
+all cases the ACPI event will be broadcast on the ACPI netlink event socket as
+well as sent as a poll notification to a sysfs file. The events are as
+follows:
+
+power[1-*]_cap will be notified if the firmware changes the power cap.
+power[1-*]_interval will be notified if the firmware changes the averaging
+interval.
--- /dev/null
+Asus Laptop Extras
+
+Version 0.1
+August 6, 2009
+
+Corentin Chary <corentincj@iksaif.net>
+http://acpi4asus.sf.net/
+
+ This driver provides support for extra features of ACPI-compatible ASUS laptops.
+ It may also support some MEDION, JVC or VICTOR laptops (such as MEDION 9675 or
+ VICTOR XP7210 for example). It makes all the extra buttons generate standard
+ ACPI events that go through /proc/acpi/events and input events (like keyboards).
+ On some models adds support for changing the display brightness and output,
+ switching the LCD backlight on and off, and most importantly, allows you to
+ blink those fancy LEDs intended for reporting mail and wireless status.
+
+This driver supercedes the old asus_acpi driver.
+
+Requirements
+------------
+
+ Kernel 2.6.X sources, configured for your computer, with ACPI support.
+ You also need CONFIG_INPUT and CONFIG_ACPI.
+
+Status
+------
+
+ The features currently supported are the following (see below for
+ detailed description):
+
+ - Fn key combinations
+ - Bluetooth enable and disable
+ - Wlan enable and disable
+ - GPS enable and disable
+ - Video output switching
+ - Ambient Light Sensor on and off
+ - LED control
+ - LED Display control
+ - LCD brightness control
+ - LCD on and off
+
+ A compatibility table by model and feature is maintained on the web
+ site, http://acpi4asus.sf.net/.
+
+Usage
+-----
+
+ Try "modprobe asus_acpi". Check your dmesg (simply type dmesg). You should
+ see some lines like this :
+
+ Asus Laptop Extras version 0.42
+ L2D model detected.
+
+ If it is not the output you have on your laptop, send it (and the laptop's
+ DSDT) to me.
+
+ That's all, now, all the events generated by the hotkeys of your laptop
+ should be reported in your /proc/acpi/event entry. You can check with
+ "acpi_listen".
+
+ Hotkeys are also reported as input keys (like keyboards) you can check
+ which key are supported using "xev" under X11.
+
+ You can get informations on the version of your DSDT table by reading the
+ /sys/devices/platform/asus-laptop/infos entry. If you have a question or a
+ bug report to do, please include the output of this entry.
+
+LEDs
+----
+
+ You can modify LEDs be echoing values to /sys/class/leds/asus::*/brightness :
+ echo 1 > /sys/class/leds/asus::mail/brightness
+ will switch the mail LED on.
+ You can also know if they are on/off by reading their content and use
+ kernel triggers like ide-disk or heartbeat.
+
+Backlight
+---------
+
+ You can control lcd backlight power and brightness with
+ /sys/class/backlight/asus-laptop/. Brightness Values are between 0 and 15.
+
+Wireless devices
+---------------
+
+ You can turn the internal Bluetooth adapter on/off with the bluetooth entry
+ (only on models with Bluetooth). This usually controls the associated LED.
+ Same for Wlan adapter.
+
+Display switching
+-----------------
+
+ Note: the display switching code is currently considered EXPERIMENTAL.
+
+ Switching works for the following models:
+ L3800C
+ A2500H
+ L5800C
+ M5200N
+ W1000N (albeit with some glitches)
+ M6700R
+ A6JC
+ F3J
+
+ Switching doesn't work for the following:
+ M3700N
+ L2X00D (locks the laptop under certain conditions)
+
+ To switch the displays, echo values from 0 to 15 to
+ /sys/devices/platform/asus-laptop/display. The significance of those values
+ is as follows:
+
+ +-------+-----+-----+-----+-----+-----+
+ | Bin | Val | DVI | TV | CRT | LCD |
+ +-------+-----+-----+-----+-----+-----+
+ + 0000 + 0 + + + + +
+ +-------+-----+-----+-----+-----+-----+
+ + 0001 + 1 + + + + X +
+ +-------+-----+-----+-----+-----+-----+
+ + 0010 + 2 + + + X + +
+ +-------+-----+-----+-----+-----+-----+
+ + 0011 + 3 + + + X + X +
+ +-------+-----+-----+-----+-----+-----+
+ + 0100 + 4 + + X + + +
+ +-------+-----+-----+-----+-----+-----+
+ + 0101 + 5 + + X + + X +
+ +-------+-----+-----+-----+-----+-----+
+ + 0110 + 6 + + X + X + +
+ +-------+-----+-----+-----+-----+-----+
+ + 0111 + 7 + + X + X + X +
+ +-------+-----+-----+-----+-----+-----+
+ + 1000 + 8 + X + + + +
+ +-------+-----+-----+-----+-----+-----+
+ + 1001 + 9 + X + + + X +
+ +-------+-----+-----+-----+-----+-----+
+ + 1010 + 10 + X + + X + +
+ +-------+-----+-----+-----+-----+-----+
+ + 1011 + 11 + X + + X + X +
+ +-------+-----+-----+-----+-----+-----+
+ + 1100 + 12 + X + X + + +
+ +-------+-----+-----+-----+-----+-----+
+ + 1101 + 13 + X + X + + X +
+ +-------+-----+-----+-----+-----+-----+
+ + 1110 + 14 + X + X + X + +
+ +-------+-----+-----+-----+-----+-----+
+ + 1111 + 15 + X + X + X + X +
+ +-------+-----+-----+-----+-----+-----+
+
+ In most cases, the appropriate displays must be plugged in for the above
+ combinations to work. TV-Out may need to be initialized at boot time.
+
+ Debugging:
+ 1) Check whether the Fn+F8 key:
+ a) does not lock the laptop (try disabling CONFIG_X86_UP_APIC or boot with
+ noapic / nolapic if it does)
+ b) generates events (0x6n, where n is the value corresponding to the
+ configuration above)
+ c) actually works
+ Record the disp value at every configuration.
+ 2) Echo values from 0 to 15 to /sys/devices/platform/asus-laptop/display.
+ Record its value, note any change. If nothing changes, try a broader range,
+ up to 65535.
+ 3) Send ANY output (both positive and negative reports are needed, unless your
+ machine is already listed above) to the acpi4asus-user mailing list.
+
+ Note: on some machines (e.g. L3C), after the module has been loaded, only 0x6n
+ events are generated and no actual switching occurs. In such a case, a line
+ like:
+
+ echo $((10#$arg-60)) > /sys/devices/platform/asus-laptop/display
+
+ will usually do the trick ($arg is the 0000006n-like event passed to acpid).
+
+ Note: there is currently no reliable way to read display status on xxN
+ (Centrino) models.
+
+LED display
+-----------
+
+ Some models like the W1N have a LED display that can be used to display
+ several informations.
+
+ LED display works for the following models:
+ W1000N
+ W1J
+
+ To control the LED display, use the following :
+
+ echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
+
+ where T control the 3 letters display, and DDD the 3 digits display,
+ according to the tables below.
+
+ DDD (digits)
+ 000 to 999 = display digits
+ AAA = ---
+ BBB to FFF = turn-off
+
+ T (type)
+ 0 = off
+ 1 = dvd
+ 2 = vcd
+ 3 = mp3
+ 4 = cd
+ 5 = tv
+ 6 = cpu
+ 7 = vol
+
+ For example "echo 0x01000001 >/sys/devices/platform/asus-laptop/ledd"
+ would display "DVD001".
+
+Driver options:
+---------------
+
+ Options can be passed to the asus-laptop driver using the standard
+ module argument syntax (<param>=<value> when passing the option to the
+ module or asus-laptop.<param>=<value> on the kernel boot line when
+ asus-laptop is statically linked into the kernel).
+
+ wapf: WAPF defines the behavior of the Fn+Fx wlan key
+ The significance of values is yet to be found, but
+ most of the time:
+ - 0x0 should do nothing
+ - 0x1 should allow to control the device with Fn+Fx key.
+ - 0x4 should send an ACPI event (0x88) while pressing the Fn+Fx key
+ - 0x5 like 0x1 or 0x4
+
+ The default value is 0x1.
+
+Unsupported models
+------------------
+
+ These models will never be supported by this module, as they use a completely
+ different mechanism to handle LEDs and extra stuff (meaning we have no clue
+ how it works):
+
+ - ASUS A1300 (A1B), A1370D
+ - ASUS L7300G
+ - ASUS L8400
+
+Patches, Errors, Questions:
+--------------------------
+
+ I appreciate any success or failure
+ reports, especially if they add to or correct the compatibility table.
+ Please include the following information in your report:
+
+ - Asus model name
+ - a copy of your ACPI tables, using the "acpidump" utility
+ - a copy of /sys/devices/platform/asus-laptop/infos
+ - which driver features work and which don't
+ - the observed behavior of non-working features
+
+ Any other comments or patches are also more than welcome.
+
+ acpi4asus-user@lists.sourceforge.net
+ http://sourceforge.net/projects/acpi4asus
+
echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
... any other 8-hex-digit mask ...
- echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
+ echo reset > /proc/acpi/ibm/hotkey -- restore the recommended mask
The following commands have been deprecated and will cause the kernel
to log a warning:
Returns 0.
hotkey_bios_mask:
+ DEPRECATED, DON'T USE, WILL BE REMOVED IN THE FUTURE.
+
Returns the hot keys mask when thinkpad-acpi was loaded.
Upon module unload, the hot keys mask will be restored
- to this value.
+ to this value. This is always 0x80c, because those are
+ the hotkeys that were supported by ancient firmware
+ without mask support.
hotkey_enable:
DEPRECATED, WILL BE REMOVED SOON.
+
LED handling under Linux
========================
handled by the input subsystem and the led class is *not* needed.
In its simplest form, the LED class just allows control of LEDs from
-userspace. LEDs appear in /sys/class/leds/. The brightness file will
-set the brightness of the LED (taking a value 0-255). Most LEDs don't
-have hardware brightness support so will just be turned on for non-zero
-brightness settings.
+userspace. LEDs appear in /sys/class/leds/. The maximum brightness of the
+LED is defined in max_brightness file. The brightness file will set the brightness
+of the LED (taking a value 0-max_brightness). Most LEDs don't have hardware
+brightness support so will just be turned on for non-zero brightness settings.
The class also introduces the optional concept of an LED trigger. A trigger
is a kernel based source of led events. Triggers can either be simple or
S: Maintained
F: security/tomoyo/
+TOPSTAR LAPTOP EXTRAS DRIVER
+M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+S: Maintained
+F: drivers/platform/x86/topstar-laptop.c
+
TOSHIBA ACPI EXTRAS DRIVER
S: Orphan
F: drivers/platform/x86/toshiba_acpi.c
struct ioc *ioc;
acpi_status status;
u64 hpa, length;
- struct acpi_buffer buffer;
struct acpi_device_info *dev_info;
status = hp_acpi_csr_space(device->handle, &hpa, &length);
if (ACPI_FAILURE(status))
return 1;
- buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
- status = acpi_get_object_info(device->handle, &buffer);
+ status = acpi_get_object_info(device->handle, &dev_info);
if (ACPI_FAILURE(status))
return 1;
- dev_info = buffer.pointer;
/*
* For HWP0001, only SBA appears in ACPI namespace. It encloses the PCI
* root bridges, and its CSR space includes the IOC function.
*/
- if (strncmp("HWP0001", dev_info->hardware_id.value, 7) == 0) {
+ if (strncmp("HWP0001", dev_info->hardware_id.string, 7) == 0) {
hpa += ZX1_IOC_OFFSET;
/* zx1 based systems default to kernel page size iommu pages */
if (!iovp_shift)
#else /* !CONFIG_ACPI */
-#define acpi_disabled 1
#define acpi_lapic 0
#define acpi_ioapic 0
static inline void acpi_noirq_set(void) { }
#include <asm/e820.h>
#include <asm/pci_x86.h>
+#define PREFIX "PCI: "
+
/* aperture is up to 256MB but BIOS may reserve less */
#define MMCONFIG_APER_MIN (2 * 1024*1024)
#define MMCONFIG_APER_MAX (256 * 1024*1024)
/proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
/proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
/proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
-
+ /proc/acpi/processor/*/power (/sys/devices/system/cpu/*/cpuidle/*)
+ /proc/acpi/processor/*/performance (/sys/devices/system/cpu/*/
+ cpufreq/*)
+ /proc/acpi/processor/*/throttling (/sys/class/thermal/
+ cooling_device*/*)
This option has no effect on /proc/acpi/ files
and functions which do not yet exist in /sys.
Say N to delete power /proc/acpi/ directories that have moved to /sys/
+config ACPI_POWER_METER
+ tristate "ACPI 4.0 power meter"
+ depends on HWMON
+ help
+ This driver exposes ACPI 4.0 power meters as hardware monitoring
+ devices. Say Y (or M) if you have a computer with ACPI 4.0 firmware
+ and a power meter.
+
+ To compile this driver as a module, choose M here:
+ the module will be called power-meter.
+
config ACPI_SYSFS_POWER
bool "Future power /sys interface"
select POWER_SUPPLY
obj-$(CONFIG_ACPI_BATTERY) += battery.o
obj-$(CONFIG_ACPI_SBS) += sbshc.o
obj-$(CONFIG_ACPI_SBS) += sbs.o
+obj-$(CONFIG_ACPI_POWER_METER) += power_meter.o
# processor has its own "processor." module_param namespace
processor-y := processor_core.o processor_throttling.o
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_AC_DEVICE_NAME "AC Adapter"
#define ACPI_AC_FILE_STATE "state"
static int acpi_memory_device_add(struct acpi_device *device);
static int acpi_memory_device_remove(struct acpi_device *device, int type);
-static int acpi_memory_device_start(struct acpi_device *device);
static const struct acpi_device_id memory_device_ids[] = {
{ACPI_MEMORY_DEVICE_HID, 0},
.ops = {
.add = acpi_memory_device_add,
.remove = acpi_memory_device_remove,
- .start = acpi_memory_device_start,
},
};
printk(KERN_DEBUG "%s \n", acpi_device_name(device));
- return result;
-}
-
-static int acpi_memory_device_remove(struct acpi_device *device, int type)
-{
- struct acpi_memory_device *mem_device = NULL;
-
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- mem_device = acpi_driver_data(device);
- kfree(mem_device);
-
- return 0;
-}
-
-static int acpi_memory_device_start (struct acpi_device *device)
-{
- struct acpi_memory_device *mem_device;
- int result = 0;
-
/*
* Early boot code has recognized memory area by EFI/E820.
* If DSDT shows these memory devices on boot, hotplug is not necessary
if (!acpi_hotmem_initialized)
return 0;
- mem_device = acpi_driver_data(device);
-
if (!acpi_memory_check_device(mem_device)) {
/* call add_memory func */
result = acpi_memory_enable_device(mem_device);
return result;
}
+static int acpi_memory_device_remove(struct acpi_device *device, int type)
+{
+ struct acpi_memory_device *mem_device = NULL;
+
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ mem_device = acpi_driver_data(device);
+ kfree(mem_device);
+
+ return 0;
+}
+
/*
* Helper function to check for memory device
*/
{
char *hardware_id;
acpi_status status;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_device_info *info;
-
- status = acpi_get_object_info(handle, &buffer);
+ status = acpi_get_object_info(handle, &info);
if (ACPI_FAILURE(status))
return status;
- info = buffer.pointer;
if (!(info->valid & ACPI_VALID_HID)) {
- kfree(buffer.pointer);
+ kfree(info);
return AE_ERROR;
}
- hardware_id = info->hardware_id.value;
+ hardware_id = info->hardware_id.string;
if ((hardware_id == NULL) ||
(strcmp(hardware_id, ACPI_MEMORY_DEVICE_HID)))
status = AE_ERROR;
- kfree(buffer.pointer);
+ kfree(info);
return status;
}
acpi-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \
nsalloc.o nseval.o nsnames.o nsutils.o nsxfname.o \
nsdump.o nsinit.o nsobject.o nswalk.o nsxfobj.o \
- nsparse.o nspredef.o
+ nsparse.o nspredef.o nsrepair.o
acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
- utstate.o utmutex.o utobject.o utresrc.o utlock.o
+ utstate.o utmutex.o utobject.o utresrc.o utlock.o utids.o
/* Operation regions */
-#define ACPI_NUM_PREDEFINED_REGIONS 8
+#define ACPI_NUM_PREDEFINED_REGIONS 9
#define ACPI_USER_REGION_BEGIN 0x80
/* Maximum space_ids for Operation Regions */
#define ACPI_RSDP_CHECKSUM_LENGTH 20
#define ACPI_RSDP_XCHECKSUM_LENGTH 36
-/* SMBus bidirectional buffer size */
+/* SMBus and IPMI bidirectional buffer size */
#define ACPI_SMBUS_BUFFER_SIZE 34
+#define ACPI_IPMI_BUFFER_SIZE 66
+
+/* _sx_d and _sx_w control methods */
+
+#define ACPI_NUM_sx_d_METHODS 4
+#define ACPI_NUM_sx_w_METHODS 5
/******************************************************************************
*
acpi_db_display_argument_object(union acpi_operand_object *obj_desc,
struct acpi_walk_state *walk_state);
-void acpi_db_check_predefined_names(void);
-
-void acpi_db_batch_execute(void);
-
/*
* dbexec - debugger control method execution
*/
#define ACPI_INIT_GLOBAL(a,b) a
#endif
+#ifdef DEFINE_ACPI_GLOBALS
+
+/* Public globals, available from outside ACPICA subsystem */
+
/*****************************************************************************
*
* Runtime configuration (static defaults that can be overriden at runtime)
* 5) Allow unresolved references (invalid target name) in package objects
* 6) Enable warning messages for behavior that is not ACPI spec compliant
*/
-ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_interpreter_slack, FALSE);
+u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_interpreter_slack, FALSE);
/*
* Automatically serialize ALL control methods? Default is FALSE, meaning
* Only change this if the ASL code is poorly written and cannot handle
* reentrancy even though methods are marked "NotSerialized".
*/
-ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_all_methods_serialized, FALSE);
+u8 ACPI_INIT_GLOBAL(acpi_gbl_all_methods_serialized, FALSE);
/*
* Create the predefined _OSI method in the namespace? Default is TRUE
* because ACPI CA is fully compatible with other ACPI implementations.
* Changing this will revert ACPI CA (and machine ASL) to pre-OSI behavior.
*/
-ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_create_osi_method, TRUE);
+u8 ACPI_INIT_GLOBAL(acpi_gbl_create_osi_method, TRUE);
/*
* Disable wakeup GPEs during runtime? Default is TRUE because WAKE and
* RUNTIME GPEs should never be shared, and WAKE GPEs should typically only
* be enabled just before going to sleep.
*/
-ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE);
+u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE);
/*
* Optionally use default values for the ACPI register widths. Set this to
* TRUE to use the defaults, if an FADT contains incorrect widths/lengths.
*/
-ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_use_default_register_widths, TRUE);
+u8 ACPI_INIT_GLOBAL(acpi_gbl_use_default_register_widths, TRUE);
+
+/* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */
+
+struct acpi_table_fadt acpi_gbl_FADT;
+u32 acpi_current_gpe_count;
+u32 acpi_gbl_trace_flags;
+acpi_name acpi_gbl_trace_method_name;
+
+#endif
/*****************************************************************************
*
*
****************************************************************************/
-/* Runtime configuration of debug print levels */
-
-extern u32 acpi_dbg_level;
-extern u32 acpi_dbg_layer;
-
/* Procedure nesting level for debug output */
extern u32 acpi_gbl_nesting_level;
ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
-ACPI_EXTERN acpi_name acpi_gbl_trace_method_name;
ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
-ACPI_EXTERN u32 acpi_gbl_trace_flags;
/*****************************************************************************
*
* acpi_gbl_root_table_list is the master list of ACPI tables found in the
* RSDT/XSDT.
*
- * acpi_gbl_FADT is a local copy of the FADT, converted to a common format.
*/
ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list;
-ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT;
ACPI_EXTERN struct acpi_table_facs *acpi_gbl_FACS;
/* These addresses are calculated from the FADT Event Block addresses */
extern u8 acpi_gbl_shutdown;
extern u32 acpi_gbl_startup_flags;
extern const char *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT];
-extern const char *acpi_gbl_highest_dstate_names[4];
+extern const char *acpi_gbl_lowest_dstate_names[ACPI_NUM_sx_w_METHODS];
+extern const char *acpi_gbl_highest_dstate_names[ACPI_NUM_sx_d_METHODS];
extern const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES];
extern const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS];
ACPI_EXTERN struct acpi_namespace_node acpi_gbl_root_node_struct;
ACPI_EXTERN struct acpi_namespace_node *acpi_gbl_root_node;
ACPI_EXTERN struct acpi_namespace_node *acpi_gbl_fadt_gpe_device;
+ACPI_EXTERN union acpi_operand_object *acpi_gbl_module_code_list;
extern const u8 acpi_gbl_ns_properties[ACPI_NUM_NS_TYPES];
extern const struct acpi_predefined_names
ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head;
ACPI_EXTERN struct acpi_gpe_block_info
*acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS];
-ACPI_EXTERN u32 acpi_current_gpe_count;
/*****************************************************************************
*
/*
* hwregs - ACPI Register I/O
*/
+acpi_status
+acpi_hw_validate_register(struct acpi_generic_address *reg,
+ u8 max_bit_width, u64 *address);
+
+acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg);
+
+acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg);
+
struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id);
acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control);
void acpi_ex_release_global_lock(u32 rule);
-void acpi_ex_eisa_id_to_string(u32 numeric_id, char *out_string);
+void acpi_ex_eisa_id_to_string(char *dest, acpi_integer compressed_id);
-void acpi_ex_unsigned_integer_to_string(acpi_integer value, char *out_string);
+void acpi_ex_integer_to_string(char *dest, acpi_integer value);
/*
* exregion - default op_region handlers
struct acpi_package_info3 ret_info3;
};
+/* Data block used during object validation */
+
+struct acpi_predefined_data {
+ char *pathname;
+ const union acpi_predefined_info *predefined;
+ u32 flags;
+ u8 node_flags;
+};
+
+/* Defines for Flags field above */
+
+#define ACPI_OBJECT_REPAIRED 1
+
/*
* Bitmapped return value types
* Note: the actual data types must be contiguous, a loop in nspredef.c
#define ACPI_OSI_WIN_XP_SP2 0x05
#define ACPI_OSI_WINSRV_2003_SP1 0x06
#define ACPI_OSI_WIN_VISTA 0x07
+#define ACPI_OSI_WINSRV_2008 0x08
+#define ACPI_OSI_WIN_VISTA_SP1 0x09
+#define ACPI_OSI_WIN_7 0x0A
#define ACPI_ALWAYS_ILLEGAL 0x00
*/
#define ACPI_ERROR_NAMESPACE(s, e) acpi_ns_report_error (AE_INFO, s, e);
#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ns_report_method_error (AE_INFO, s, n, p, e);
+#define ACPI_WARN_PREDEFINED(plist) acpi_ut_predefined_warning plist
#else
#define ACPI_ERROR_NAMESPACE(s, e)
#define ACPI_ERROR_METHOD(s, n, p, e)
+#define ACPI_WARN_PREDEFINED(plist)
#endif /* ACPI_NO_ERROR_MESSAGES */
/*
#define ACPI_NS_WALK_UNLOCK 0x01
#define ACPI_NS_WALK_TEMP_NODES 0x02
+/* Object is not a package element */
+
+#define ACPI_NOT_PACKAGE_ELEMENT ACPI_UINT32_MAX
+
+/* Always emit warning message, not dependent on node flags */
+
+#define ACPI_WARN_ALWAYS 0
+
/*
* nsinit - Namespace initialization
*/
void acpi_ns_delete_node(struct acpi_namespace_node *node);
+void acpi_ns_remove_node(struct acpi_namespace_node *node);
+
void
acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_handle);
*/
acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info);
+void acpi_ns_exec_module_code_list(void);
+
/*
* nspredef - Support for predefined/reserved names
*/
acpi_object_handler handler, void **data);
/*
+ * nsrepair - return object repair for predefined methods/objects
+ */
+acpi_status
+acpi_ns_repair_object(struct acpi_predefined_data *data,
+ u32 expected_btypes,
+ u32 package_index,
+ union acpi_operand_object **return_object_ptr);
+
+acpi_status
+acpi_ns_repair_package_list(struct acpi_predefined_data *data,
+ union acpi_operand_object **obj_desc_ptr);
+
+/*
* nssearch - Namespace searching and entry
*/
acpi_status
#define AOPOBJ_SETUP_COMPLETE 0x10
#define AOPOBJ_SINGLE_DATUM 0x20
#define AOPOBJ_INVALID 0x40 /* Used if host OS won't allow an op_region address */
+#define AOPOBJ_MODULE_LEVEL 0x80
/******************************************************************************
*
#define ACPI_PARSE_DEFERRED_OP 0x0100
#define ACPI_PARSE_DISASSEMBLE 0x0200
+#define ACPI_PARSE_MODULE_LEVEL 0x0400
+
/******************************************************************************
*
* Parser interfaces
* (Used for _PRW)
*
*
- * 2) PTYPE2 packages contain a variable number of sub-packages. Each of the
- * different types describe the contents of each of the sub-packages.
+ * 2) PTYPE2 packages contain a Variable-length number of sub-packages. Each
+ * of the different types describe the contents of each of the sub-packages.
*
* ACPI_PTYPE2: Each subpackage contains 1 or 2 object types:
* object type
* ACPI_PTYPE2_MIN: Each subpackage has a variable but minimum length
* (Used for _HPX)
*
+ * ACPI_PTYPE2_REV_FIXED: Revision at start, each subpackage is Fixed-length
+ * (Used for _ART, _FPS)
+ *
*****************************************************************************/
enum acpi_return_package_types {
ACPI_PTYPE2_COUNT = 5,
ACPI_PTYPE2_PKG_COUNT = 6,
ACPI_PTYPE2_FIXED = 7,
- ACPI_PTYPE2_MIN = 8
+ ACPI_PTYPE2_MIN = 8,
+ ACPI_PTYPE2_REV_FIXED = 9
};
+#ifdef ACPI_CREATE_PREDEFINED_TABLE
/*
* Predefined method/object information table.
*
* is saved here (rather than in a separate table) in order to minimize the
* overall size of the stored data.
*/
-static const union acpi_predefined_info predefined_names[] = {
- {.info = {"_AC0", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AC1", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AC2", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AC3", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AC4", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AC5", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AC6", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AC7", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AC8", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AC9", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_ADR", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_AL0", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_AL1", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_AL2", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_AL3", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_AL4", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_AL5", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_AL6", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_AL7", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_AL8", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_AL9", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_ALC", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_ALI", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_ALP", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_ALR", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* variable (Pkgs) each 2 (Ints) */
- {.info = {"_ALT", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_BBN", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_BCL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (Ints) */
- {.info = {"_BCM", 1, 0}},
- {.info = {"_BDN", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_BFS", 1, 0}},
- {.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER,
- 9,
- ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}}, /* fixed (9 Int),(4 Str) */
- {.info = {"_BLT", 3, 0}},
- {.info = {"_BMC", 1, 0}},
- {.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* fixed (5 Int) */
- {.info = {"_BQC", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_BST", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0}}, /* fixed (4 Int) */
- {.info = {"_BTM", 1, ACPI_RTYPE_INTEGER}},
- {.info = {"_BTP", 1, 0}},
- {.info = {"_CBA", 0, ACPI_RTYPE_INTEGER}}, /* see PCI firmware spec 3.0 */
- {.info = {"_CID", 0,
- ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING | ACPI_RTYPE_PACKAGE}},
- {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING, 0, 0, 0, 0}}, /* variable (Ints/Strs) */
- {.info = {"_CRS", 0, ACPI_RTYPE_BUFFER}},
- {.info = {"_CRT", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_CSD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (1 Int(n), n-1 Int) */
- {.info = {"_CST", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_PKG_COUNT,
- ACPI_RTYPE_BUFFER, 1,
- ACPI_RTYPE_INTEGER, 3, 0}}, /* variable (1 Int(n), n Pkg (1 Buf/3 Int) */
- {.info = {"_DCK", 1, ACPI_RTYPE_INTEGER}},
- {.info = {"_DCS", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_DDC", 1, ACPI_RTYPE_INTEGER | ACPI_RTYPE_BUFFER}},
- {.info = {"_DDN", 0, ACPI_RTYPE_STRING}},
- {.info = {"_DGS", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_DIS", 0, 0}},
- {.info = {"_DMA", 0, ACPI_RTYPE_BUFFER}},
- {.info = {"_DOD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (Ints) */
- {.info = {"_DOS", 1, 0}},
- {.info = {"_DSM", 4, ACPI_RTYPE_ALL}}, /* Must return a type, but it can be of any type */
- {.info = {"_DSS", 1, 0}},
- {.info = {"_DSW", 3, 0}},
- {.info = {"_EC_", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_EDL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_EJ0", 1, 0}},
- {.info = {"_EJ1", 1, 0}},
- {.info = {"_EJ2", 1, 0}},
- {.info = {"_EJ3", 1, 0}},
- {.info = {"_EJ4", 1, 0}},
- {.info = {"_EJD", 0, ACPI_RTYPE_STRING}},
- {.info = {"_FDE", 0, ACPI_RTYPE_BUFFER}},
- {.info = {"_FDI", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 16, 0, 0, 0}}, /* fixed (16 Int) */
- {.info = {"_FDM", 1, 0}},
- {.info = {"_FIX", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (Ints) */
- {.info = {"_GLK", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_GPD", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_GPE", 0, ACPI_RTYPE_INTEGER}}, /* _GPE method, not _GPE scope */
- {.info = {"_GSB", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_GTF", 0, ACPI_RTYPE_BUFFER}},
- {.info = {"_GTM", 0, ACPI_RTYPE_BUFFER}},
- {.info = {"_GTS", 1, 0}},
- {.info = {"_HID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING}},
- {.info = {"_HOT", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_HPP", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0}}, /* fixed (4 Int) */
+static const union acpi_predefined_info predefined_names[] =
+{
+ {{"_AC0", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AC1", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AC2", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AC3", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AC4", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AC5", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AC6", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AC7", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AC8", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AC9", 0, ACPI_RTYPE_INTEGER}},
+ {{"_ADR", 0, ACPI_RTYPE_INTEGER}},
+ {{"_AL0", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_AL1", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_AL2", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_AL3", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_AL4", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_AL5", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_AL6", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_AL7", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_AL8", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_AL9", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_ALC", 0, ACPI_RTYPE_INTEGER}},
+ {{"_ALI", 0, ACPI_RTYPE_INTEGER}},
+ {{"_ALP", 0, ACPI_RTYPE_INTEGER}},
+ {{"_ALR", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 2 (Ints) */
+ {{{ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 2,0}, 0,0}},
+
+ {{"_ALT", 0, ACPI_RTYPE_INTEGER}},
+ {{"_ART", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (1 Int(rev), n Pkg (2 Ref/11 Int) */
+ {{{ACPI_PTYPE2_REV_FIXED, ACPI_RTYPE_REFERENCE, 2, ACPI_RTYPE_INTEGER},
+ 11, 0}},
+
+ {{"_BBN", 0, ACPI_RTYPE_INTEGER}},
+ {{"_BCL", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Ints) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0,0}, 0,0}},
+
+ {{"_BCM", 1, 0}},
+ {{"_BCT", 1, ACPI_RTYPE_INTEGER}},
+ {{"_BDN", 0, ACPI_RTYPE_INTEGER}},
+ {{"_BFS", 1, 0}},
+ {{"_BIF", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (9 Int),(4 Str) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9, ACPI_RTYPE_STRING}, 4,0}},
+
+ {{"_BIX", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (16 Int),(4 Str) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 16, ACPI_RTYPE_STRING}, 4,
+ 0}},
+
+ {{"_BLT", 3, 0}},
+ {{"_BMA", 1, ACPI_RTYPE_INTEGER}},
+ {{"_BMC", 1, 0}},
+ {{"_BMD", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (5 Int) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5,0}, 0,0}},
+
+ {{"_BMS", 1, ACPI_RTYPE_INTEGER}},
+ {{"_BQC", 0, ACPI_RTYPE_INTEGER}},
+ {{"_BST", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (4 Int) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4,0}, 0,0}},
+
+ {{"_BTM", 1, ACPI_RTYPE_INTEGER}},
+ {{"_BTP", 1, 0}},
+ {{"_CBA", 0, ACPI_RTYPE_INTEGER}}, /* See PCI firmware spec 3.0 */
+ {{"_CDM", 0, ACPI_RTYPE_INTEGER}},
+ {{"_CID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING | ACPI_RTYPE_PACKAGE}}, /* Variable-length (Ints/Strs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING, 0,0}, 0,0}},
+
+ {{"_CRS", 0, ACPI_RTYPE_BUFFER}},
+ {{"_CRT", 0, ACPI_RTYPE_INTEGER}},
+ {{"_CSD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (1 Int(n), n-1 Int) */
+ {{{ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 0,0}, 0,0}},
+
+ {{"_CST", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (1 Int(n), n Pkg (1 Buf/3 Int) */
+ {{{ACPI_PTYPE2_PKG_COUNT,ACPI_RTYPE_BUFFER, 1, ACPI_RTYPE_INTEGER}, 3,0}},
+
+ {{"_DCK", 1, ACPI_RTYPE_INTEGER}},
+ {{"_DCS", 0, ACPI_RTYPE_INTEGER}},
+ {{"_DDC", 1, ACPI_RTYPE_INTEGER | ACPI_RTYPE_BUFFER}},
+ {{"_DDN", 0, ACPI_RTYPE_STRING}},
+ {{"_DGS", 0, ACPI_RTYPE_INTEGER}},
+ {{"_DIS", 0, 0}},
+ {{"_DMA", 0, ACPI_RTYPE_BUFFER}},
+ {{"_DOD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Ints) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0,0}, 0,0}},
+
+ {{"_DOS", 1, 0}},
+ {{"_DSM", 4, ACPI_RTYPE_ALL}}, /* Must return a type, but it can be of any type */
+ {{"_DSS", 1, 0}},
+ {{"_DSW", 3, 0}},
+ {{"_DTI", 1, 0}},
+ {{"_EC_", 0, ACPI_RTYPE_INTEGER}},
+ {{"_EDL", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs)*/
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_EJ0", 1, 0}},
+ {{"_EJ1", 1, 0}},
+ {{"_EJ2", 1, 0}},
+ {{"_EJ3", 1, 0}},
+ {{"_EJ4", 1, 0}},
+ {{"_EJD", 0, ACPI_RTYPE_STRING}},
+ {{"_FDE", 0, ACPI_RTYPE_BUFFER}},
+ {{"_FDI", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (16 Int) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 16,0}, 0,0}},
+
+ {{"_FDM", 1, 0}},
+ {{"_FIF", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (4 Int) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0}, 0, 0}},
+
+ {{"_FIX", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Ints) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 0,0}, 0,0}},
+
+ {{"_FPS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (1 Int(rev), n Pkg (5 Int) */
+ {{{ACPI_PTYPE2_REV_FIXED, ACPI_RTYPE_INTEGER, 5, 0}, 0, 0}},
+
+ {{"_FSL", 1, 0}},
+ {{"_FST", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (3 Int) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 3, 0}, 0, 0}},
+
+ {{"_GAI", 0, ACPI_RTYPE_INTEGER}},
+ {{"_GHL", 0, ACPI_RTYPE_INTEGER}},
+ {{"_GLK", 0, ACPI_RTYPE_INTEGER}},
+ {{"_GPD", 0, ACPI_RTYPE_INTEGER}},
+ {{"_GPE", 0, ACPI_RTYPE_INTEGER}}, /* _GPE method, not _GPE scope */
+ {{"_GSB", 0, ACPI_RTYPE_INTEGER}},
+ {{"_GTF", 0, ACPI_RTYPE_BUFFER}},
+ {{"_GTM", 0, ACPI_RTYPE_BUFFER}},
+ {{"_GTS", 1, 0}},
+ {{"_HID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING}},
+ {{"_HOT", 0, ACPI_RTYPE_INTEGER}},
+ {{"_HPP", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (4 Int) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4,0}, 0,0}},
/*
- * For _HPX, a single package is returned, containing a variable number of sub-packages.
- * Each sub-package contains a PCI record setting. There are several different type of
- * record settings, of different lengths, but all elements of all settings are Integers.
+ * For _HPX, a single package is returned, containing a Variable-length number
+ * of sub-packages. Each sub-package contains a PCI record setting.
+ * There are several different type of record settings, of different
+ * lengths, but all elements of all settings are Integers.
*/
- {.info = {"_HPX", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_MIN, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* variable (Pkgs) each (var Ints) */
- {.info = {"_IFT", 0, ACPI_RTYPE_INTEGER}}, /* see IPMI spec */
- {.info = {"_INI", 0, 0}},
- {.info = {"_IRC", 0, 0}},
- {.info = {"_LCK", 1, 0}},
- {.info = {"_LID", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_MAT", 0, ACPI_RTYPE_BUFFER}},
- {.info = {"_MLS", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_STRING, 2, 0, 0, 0}}, /* variable (Pkgs) each (2 Str) */
- {.info = {"_MSG", 1, 0}},
- {.info = {"_OFF", 0, 0}},
- {.info = {"_ON_", 0, 0}},
- {.info = {"_OS_", 0, ACPI_RTYPE_STRING}},
- {.info = {"_OSC", 4, ACPI_RTYPE_BUFFER}},
- {.info = {"_OST", 3, 0}},
- {.info = {"_PCL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_PCT", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_BUFFER, 2, 0, 0, 0}}, /* fixed (2 Buf) */
- {.info = {"_PDC", 1, 0}},
- {.info = {"_PIC", 1, 0}},
- {.info = {"_PLD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_BUFFER, 0, 0, 0, 0}}, /* variable (Bufs) */
- {.info = {"_PPC", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_PPE", 0, ACPI_RTYPE_INTEGER}}, /* see dig64 spec */
- {.info = {"_PR0", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_PR1", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_PR2", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_PRS", 0, ACPI_RTYPE_BUFFER}},
+ {{"_HPX", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each (var Ints) */
+ {{{ACPI_PTYPE2_MIN, ACPI_RTYPE_INTEGER, 5,0}, 0,0}},
+
+ {{"_IFT", 0, ACPI_RTYPE_INTEGER}}, /* See IPMI spec */
+ {{"_INI", 0, 0}},
+ {{"_IRC", 0, 0}},
+ {{"_LCK", 1, 0}},
+ {{"_LID", 0, ACPI_RTYPE_INTEGER}},
+ {{"_MAT", 0, ACPI_RTYPE_BUFFER}},
+ {{"_MBM", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (8 Int) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 8, 0}, 0, 0}},
+
+ {{"_MLS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each (2 Str) */
+ {{{ACPI_PTYPE2, ACPI_RTYPE_STRING, 2,0}, 0,0}},
+
+ {{"_MSG", 1, 0}},
+ {{"_MSM", 4, ACPI_RTYPE_INTEGER}},
+ {{"_NTT", 0, ACPI_RTYPE_INTEGER}},
+ {{"_OFF", 0, 0}},
+ {{"_ON_", 0, 0}},
+ {{"_OS_", 0, ACPI_RTYPE_STRING}},
+ {{"_OSC", 4, ACPI_RTYPE_BUFFER}},
+ {{"_OST", 3, 0}},
+ {{"_PAI", 1, ACPI_RTYPE_INTEGER}},
+ {{"_PCL", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_PCT", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (2 Buf) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_BUFFER, 2,0}, 0,0}},
+
+ {{"_PDC", 1, 0}},
+ {{"_PDL", 0, ACPI_RTYPE_INTEGER}},
+ {{"_PIC", 1, 0}},
+ {{"_PIF", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (3 Int),(3 Str) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 3, ACPI_RTYPE_STRING}, 3, 0}},
+
+ {{"_PLD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Bufs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_BUFFER, 0,0}, 0,0}},
+
+ {{"_PMC", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (11 Int),(3 Str) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 11, ACPI_RTYPE_STRING}, 3,
+ 0}},
+
+ {{"_PMD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0}, 0, 0}},
+
+ {{"_PMM", 0, ACPI_RTYPE_INTEGER}},
+ {{"_PPC", 0, ACPI_RTYPE_INTEGER}},
+ {{"_PPE", 0, ACPI_RTYPE_INTEGER}}, /* See dig64 spec */
+ {{"_PR0", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_PR1", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_PR2", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_PR3", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0}, 0, 0}},
+
+ {{"_PRL", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0}, 0, 0}},
+
+ {{"_PRS", 0, ACPI_RTYPE_BUFFER}},
/*
- * For _PRT, many BIOSs reverse the 2nd and 3rd Package elements. This bug is so prevalent that there
- * is code in the ACPICA Resource Manager to detect this and switch them back. For now, do not allow
- * and issue a warning. To allow this and eliminate the warning, add the ACPI_RTYPE_REFERENCE
- * type to the 2nd element (index 1) in the statement below.
+ * For _PRT, many BIOSs reverse the 3rd and 4th Package elements (Source
+ * and source_index). This bug is so prevalent that there is code in the
+ * ACPICA Resource Manager to detect this and switch them back. For now,
+ * do not allow and issue a warning. To allow this and eliminate the
+ * warning, add the ACPI_RTYPE_REFERENCE type to the 4th element (index 3)
+ * in the statement below.
*/
- {.info = {"_PRT", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_FIXED, 4,
- ACPI_RTYPE_INTEGER,
- ACPI_RTYPE_INTEGER,
- ACPI_RTYPE_INTEGER | ACPI_RTYPE_REFERENCE, ACPI_RTYPE_INTEGER}}, /* variable (Pkgs) each (4): Int,Int,Int/Ref,Int */
-
- {.info = {"_PRW", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_OPTION, 2,
- ACPI_RTYPE_INTEGER |
- ACPI_RTYPE_PACKAGE,
- ACPI_RTYPE_INTEGER, ACPI_RTYPE_REFERENCE, 0}}, /* variable (Pkgs) each: Pkg/Int,Int,[variable Refs] (Pkg is Ref/Int) */
-
- {.info = {"_PS0", 0, 0}},
- {.info = {"_PS1", 0, 0}},
- {.info = {"_PS2", 0, 0}},
- {.info = {"_PS3", 0, 0}},
- {.info = {"_PSC", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_PSD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 0, 0, 0, 0}}, /* variable (Pkgs) each (5 Int) with count */
- {.info = {"_PSL", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_PSR", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_PSS", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 6, 0, 0, 0}}, /* variable (Pkgs) each (6 Int) */
- {.info = {"_PSV", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_PSW", 1, 0}},
- {.info = {"_PTC", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_BUFFER, 2, 0, 0, 0}}, /* fixed (2 Buf) */
- {.info = {"_PTS", 1, 0}},
- {.info = {"_PXM", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_REG", 2, 0}},
- {.info = {"_REV", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_RMV", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_ROM", 2, ACPI_RTYPE_BUFFER}},
- {.info = {"_RTV", 0, ACPI_RTYPE_INTEGER}},
+ {{"_PRT", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each (4): Int,Int,Int/Ref,Int */
+ {{{ACPI_PTYPE2_FIXED, 4, ACPI_RTYPE_INTEGER,ACPI_RTYPE_INTEGER},
+ ACPI_RTYPE_INTEGER | ACPI_RTYPE_REFERENCE,
+ ACPI_RTYPE_INTEGER}},
+
+ {{"_PRW", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each: Pkg/Int,Int,[Variable-length Refs] (Pkg is Ref/Int) */
+ {{{ACPI_PTYPE1_OPTION, 2, ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE,
+ ACPI_RTYPE_INTEGER}, ACPI_RTYPE_REFERENCE,0}},
+
+ {{"_PS0", 0, 0}},
+ {{"_PS1", 0, 0}},
+ {{"_PS2", 0, 0}},
+ {{"_PS3", 0, 0}},
+ {{"_PSC", 0, ACPI_RTYPE_INTEGER}},
+ {{"_PSD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each (5 Int) with count */
+ {{{ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER,0,0}, 0,0}},
+
+ {{"_PSL", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_PSR", 0, ACPI_RTYPE_INTEGER}},
+ {{"_PSS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each (6 Int) */
+ {{{ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 6,0}, 0,0}},
+
+ {{"_PSV", 0, ACPI_RTYPE_INTEGER}},
+ {{"_PSW", 1, 0}},
+ {{"_PTC", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (2 Buf) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_BUFFER, 2,0}, 0,0}},
+
+ {{"_PTP", 2, ACPI_RTYPE_INTEGER}},
+ {{"_PTS", 1, 0}},
+ {{"_PUR", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (2 Int) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0}, 0, 0}},
+
+ {{"_PXM", 0, ACPI_RTYPE_INTEGER}},
+ {{"_REG", 2, 0}},
+ {{"_REV", 0, ACPI_RTYPE_INTEGER}},
+ {{"_RMV", 0, ACPI_RTYPE_INTEGER}},
+ {{"_ROM", 2, ACPI_RTYPE_BUFFER}},
+ {{"_RTV", 0, ACPI_RTYPE_INTEGER}},
/*
- * For _S0_ through _S5_, the ACPI spec defines a return Package containing 1 Integer,
- * but most DSDTs have it wrong - 2,3, or 4 integers. Allow this by making the objects "variable length",
- * but all elements must be Integers.
+ * For _S0_ through _S5_, the ACPI spec defines a return Package
+ * containing 1 Integer, but most DSDTs have it wrong - 2,3, or 4 integers.
+ * Allow this by making the objects "Variable-length length", but all elements
+ * must be Integers.
*/
- {.info = {"_S0_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */
- {.info = {"_S1_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */
- {.info = {"_S2_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */
- {.info = {"_S3_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */
- {.info = {"_S4_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */
- {.info = {"_S5_", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1, 0, 0, 0}}, /* fixed (1 Int) */
-
- {.info = {"_S1D", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_S2D", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_S3D", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_S4D", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_S0W", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_S1W", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_S2W", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_S3W", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_S4W", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_SBS", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_SCP", 0x13, 0}}, /* Acpi 1.0 allowed 1 arg. Acpi 3.0 expanded to 3 args. Allow both. */
- /* Note: the 3-arg definition may be removed for ACPI 4.0 */
- {.info = {"_SDD", 1, 0}},
- {.info = {"_SEG", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_SLI", 0, ACPI_RTYPE_BUFFER}},
- {.info = {"_SPD", 1, ACPI_RTYPE_INTEGER}},
- {.info = {"_SRS", 1, 0}},
- {.info = {"_SRV", 0, ACPI_RTYPE_INTEGER}}, /* see IPMI spec */
- {.info = {"_SST", 1, 0}},
- {.info = {"_STA", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_STM", 3, 0}},
- {.info = {"_STR", 0, ACPI_RTYPE_BUFFER}},
- {.info = {"_SUN", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_SWS", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_TC1", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_TC2", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_TMP", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_TPC", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_TPT", 1, 0}},
- {.info = {"_TRT", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_REFERENCE, 2,
- ACPI_RTYPE_INTEGER, 6, 0}}, /* variable (Pkgs) each 2_ref/6_int */
- {.info = {"_TSD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* variable (Pkgs) each 5_int with count */
- {.info = {"_TSP", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_TSS", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* variable (Pkgs) each 5_int */
- {.info = {"_TST", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_TTS", 1, 0}},
- {.info = {"_TZD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0}}, /* variable (Refs) */
- {.info = {"_TZM", 0, ACPI_RTYPE_REFERENCE}},
- {.info = {"_TZP", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_UID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING}},
- {.info = {"_UPC", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0}}, /* fixed (4 Int) */
- {.info = {"_UPD", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_UPP", 0, ACPI_RTYPE_INTEGER}},
- {.info = {"_VPO", 0, ACPI_RTYPE_INTEGER}},
+ {{"_S0_", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (1 Int) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1,0}, 0,0}},
+
+ {{"_S1_", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (1 Int) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1,0}, 0,0}},
+
+ {{"_S2_", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (1 Int) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1,0}, 0,0}},
+
+ {{"_S3_", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (1 Int) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1,0}, 0,0}},
+
+ {{"_S4_", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (1 Int) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1,0}, 0,0}},
+
+ {{"_S5_", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (1 Int) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER, 1,0}, 0,0}},
+
+ {{"_S1D", 0, ACPI_RTYPE_INTEGER}},
+ {{"_S2D", 0, ACPI_RTYPE_INTEGER}},
+ {{"_S3D", 0, ACPI_RTYPE_INTEGER}},
+ {{"_S4D", 0, ACPI_RTYPE_INTEGER}},
+ {{"_S0W", 0, ACPI_RTYPE_INTEGER}},
+ {{"_S1W", 0, ACPI_RTYPE_INTEGER}},
+ {{"_S2W", 0, ACPI_RTYPE_INTEGER}},
+ {{"_S3W", 0, ACPI_RTYPE_INTEGER}},
+ {{"_S4W", 0, ACPI_RTYPE_INTEGER}},
+ {{"_SBS", 0, ACPI_RTYPE_INTEGER}},
+ {{"_SCP", 0x13, 0}}, /* Acpi 1.0 allowed 1 arg. Acpi 3.0 expanded to 3 args. Allow both. */
+ /* Note: the 3-arg definition may be removed for ACPI 4.0 */
+ {{"_SDD", 1, 0}},
+ {{"_SEG", 0, ACPI_RTYPE_INTEGER}},
+ {{"_SHL", 1, ACPI_RTYPE_INTEGER}},
+ {{"_SLI", 0, ACPI_RTYPE_BUFFER}},
+ {{"_SPD", 1, ACPI_RTYPE_INTEGER}},
+ {{"_SRS", 1, 0}},
+ {{"_SRV", 0, ACPI_RTYPE_INTEGER}}, /* See IPMI spec */
+ {{"_SST", 1, 0}},
+ {{"_STA", 0, ACPI_RTYPE_INTEGER}},
+ {{"_STM", 3, 0}},
+ {{"_STP", 2, ACPI_RTYPE_INTEGER}},
+ {{"_STR", 0, ACPI_RTYPE_BUFFER}},
+ {{"_STV", 2, ACPI_RTYPE_INTEGER}},
+ {{"_SUN", 0, ACPI_RTYPE_INTEGER}},
+ {{"_SWS", 0, ACPI_RTYPE_INTEGER}},
+ {{"_TC1", 0, ACPI_RTYPE_INTEGER}},
+ {{"_TC2", 0, ACPI_RTYPE_INTEGER}},
+ {{"_TIP", 1, ACPI_RTYPE_INTEGER}},
+ {{"_TIV", 1, ACPI_RTYPE_INTEGER}},
+ {{"_TMP", 0, ACPI_RTYPE_INTEGER}},
+ {{"_TPC", 0, ACPI_RTYPE_INTEGER}},
+ {{"_TPT", 1, 0}},
+ {{"_TRT", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 2_ref/6_int */
+ {{{ACPI_PTYPE2, ACPI_RTYPE_REFERENCE, 2, ACPI_RTYPE_INTEGER}, 6, 0}},
+
+ {{"_TSD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5_int with count */
+ {{{ACPI_PTYPE2_COUNT,ACPI_RTYPE_INTEGER, 5,0}, 0,0}},
+
+ {{"_TSP", 0, ACPI_RTYPE_INTEGER}},
+ {{"_TSS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5_int */
+ {{{ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 5,0}, 0,0}},
+
+ {{"_TST", 0, ACPI_RTYPE_INTEGER}},
+ {{"_TTS", 1, 0}},
+ {{"_TZD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Refs) */
+ {{{ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0,0}, 0,0}},
+
+ {{"_TZM", 0, ACPI_RTYPE_REFERENCE}},
+ {{"_TZP", 0, ACPI_RTYPE_INTEGER}},
+ {{"_UID", 0, ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING}},
+ {{"_UPC", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (4 Int) */
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4,0}, 0,0}},
+
+ {{"_UPD", 0, ACPI_RTYPE_INTEGER}},
+ {{"_UPP", 0, ACPI_RTYPE_INTEGER}},
+ {{"_VPO", 0, ACPI_RTYPE_INTEGER}},
/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
- {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
- {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* fixed (2 Int), but is optional */
- {.ret_info = {0, 0, 0, 0, 0, 0}} /* Table terminator */
+ {{"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
+ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2,0}, 0,0}}, /* Fixed-length (2 Int), but is optional */
+
+ {{{0,0,0,0}, 0,0}} /* Table terminator */
};
#if 0
/* Not implemented */
-{
-"_WDG", 0, ACPI_RTYPE_BUFFER}, /* MS Extension */
+ {{"_WDG", 0, ACPI_RTYPE_BUFFER}}, /* MS Extension */
+ {{"_WED", 1, ACPI_RTYPE_PACKAGE}}, /* MS Extension */
-{
-"_WED", 1, ACPI_RTYPE_PACKAGE}, /* MS Extension */
+ /* This is an internally implemented control method, no need to check */
+ {{"_OSI", 1, ACPI_RTYPE_INTEGER}},
- /* This is an internally implemented control method, no need to check */
-{
-"_OSI", 1, ACPI_RTYPE_INTEGER},
+ /* TBD: */
+
+ _PRT - currently ignore reversed entries. attempt to fix here?
+ think about possibly fixing package elements like _BIF, etc.
+#endif
- /* TBD: */
- _PRT - currently ignore reversed entries.attempt to fix here ?
- think about code that attempts to fix package elements like _BIF, etc.
#endif
#endif
acpi_status
acpi_ut_evaluate_numeric_object(char *object_name,
struct acpi_namespace_node *device_node,
- acpi_integer * address);
+ acpi_integer *value);
acpi_status
-acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
- struct acpica_device_id *hid);
+acpi_ut_execute_STA(struct acpi_namespace_node *device_node, u32 *status_flags);
acpi_status
-acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
- struct acpi_compatible_id_list **return_cid_list);
+acpi_ut_execute_power_methods(struct acpi_namespace_node *device_node,
+ const char **method_names,
+ u8 method_count, u8 *out_values);
+/*
+ * utids - device ID support
+ */
acpi_status
-acpi_ut_execute_STA(struct acpi_namespace_node *device_node,
- u32 * status_flags);
+acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
+ struct acpica_device_id **return_id);
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
- struct acpica_device_id *uid);
+ struct acpica_device_id **return_id);
acpi_status
-acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest);
+acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
+ struct acpica_device_id_list **return_cid_list);
/*
* utlock - reader/writer locks
*/
const char *acpi_ut_validate_exception(acpi_status status);
+u8 acpi_ut_is_pci_root_bridge(char *id);
+
u8 acpi_ut_is_aml_table(struct acpi_table_header *table);
acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id);
acpi_status
acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer);
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_predefined_warning(const char *module_name,
+ u32 line_number,
+ char *pathname,
+ u8 node_flags, const char *format, ...);
+
/* Values for Base above (16=Hex, 10=Decimal) */
#define ACPI_ANY_BASE 0
REGION_SMBUS,
REGION_CMOS,
REGION_PCI_BAR,
+ REGION_IPMI,
REGION_DATA_TABLE, /* Internal use only */
REGION_FIXED_HW = 0x7F
} AML_REGION_TYPES;
flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
ACPI_NS_ERROR_IF_FOUND;
- /* Mark node temporary if we are executing a method */
-
- if (walk_state->method_node) {
+ /*
+ * Mark node temporary if we are executing a normal control
+ * method. (Don't mark if this is a module-level code method)
+ */
+ if (walk_state->method_node &&
+ !(walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
flags |= ACPI_NS_TEMPORARY;
}
flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
ACPI_NS_ERROR_IF_FOUND;
- /* Mark node(s) temporary if we are executing a method */
-
- if (walk_state->method_node) {
+ /*
+ * Mark node(s) temporary if we are executing a normal control
+ * method. (Don't mark if this is a module-level code method)
+ */
+ if (walk_state->method_node &&
+ !(walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
flags |= ACPI_NS_TEMPORARY;
}
}
/*
- * Delete any namespace objects created anywhere within
- * the namespace by the execution of this method
+ * Delete any namespace objects created anywhere within the
+ * namespace by the execution of this method. Unless this method
+ * is a module-level executable code method, in which case we
+ * want make the objects permanent.
*/
- acpi_ns_delete_namespace_by_owner(method_desc->method.owner_id);
+ if (!(method_desc->method.flags & AOPOBJ_MODULE_LEVEL)) {
+ acpi_ns_delete_namespace_by_owner(method_desc->method.
+ owner_id);
+ }
}
/* Decrement the thread count on the method */
/* No more threads, we can free the owner_id */
- acpi_ut_release_owner_id(&method_desc->method.owner_id);
+ if (!(method_desc->method.flags & AOPOBJ_MODULE_LEVEL)) {
+ acpi_ut_release_owner_id(&method_desc->method.owner_id);
+ }
}
return_VOID;
case ACPI_REFCLASS_LOCAL:
- ACPI_ERROR((AE_INFO,
- "Uninitialized Local[%d] at node %p",
- index, node));
-
+ /*
+ * No error message for this case, will be trapped again later to
+ * detect and ignore cases of Store(local_x,local_x)
+ */
return_ACPI_STATUS(AE_AML_UNINITIALIZED_LOCAL);
default:
if (arg) {
/*
* num_elements was exhausted, but there are remaining elements in the
- * package_list.
+ * package_list. Truncate the package to num_elements.
*
* Note: technically, this is an error, from ACPI spec: "It is an error
* for NumElements to be less than the number of elements in the
- * PackageList". However, for now, we just print an error message and
- * no exception is returned.
+ * PackageList". However, we just print an error message and
+ * no exception is returned. This provides Windows compatibility. Some
+ * BIOSs will alter the num_elements on the fly, creating this type
+ * of ill-formed package object.
*/
while (arg) {
+ /*
+ * We must delete any package elements that were created earlier
+ * and are not going to be used because of the package truncation.
+ */
+ if (arg->common.node) {
+ acpi_ut_remove_reference(ACPI_CAST_PTR
+ (union
+ acpi_operand_object,
+ arg->common.node));
+ arg->common.node = NULL;
+ }
/* Find out how many elements there really are */
}
ACPI_WARNING((AE_INFO,
- "Package List length (%X) larger than NumElements count (%X), truncated\n",
+ "Package List length (0x%X) larger than NumElements count (0x%X), truncated\n",
i, element_count));
} else if (i < element_count) {
/*
* Note: this is not an error, the package is padded out with NULLs.
*/
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Package List length (%X) smaller than NumElements count (%X), padded with null elements\n",
+ "Package List length (0x%X) smaller than NumElements count (0x%X), padded with null elements\n",
i, element_count));
}
if ((!(walk_state->op_info->flags & AML_NSOPCODE) &&
(walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
(!(walk_state->op_info->flags & AML_NAMED))) {
-#ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
- if ((walk_state->op_info->class == AML_CLASS_EXECUTE) ||
- (walk_state->op_info->class == AML_CLASS_CONTROL)) {
- ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
- "Begin/EXEC: %s (fl %8.8X)\n",
- walk_state->op_info->name,
- walk_state->op_info->flags));
-
- /* Executing a type1 or type2 opcode outside of a method */
-
- status =
- acpi_ds_exec_begin_op(walk_state, out_op);
- return_ACPI_STATUS(status);
- }
-#endif
return_ACPI_STATUS(AE_OK);
}
/* Execution mode, node cannot already exist, node is temporary */
- flags |= (ACPI_NS_ERROR_IF_FOUND | ACPI_NS_TEMPORARY);
+ flags |= ACPI_NS_ERROR_IF_FOUND;
+
+ if (!
+ (walk_state->
+ parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
+ flags |= ACPI_NS_TEMPORARY;
+ }
}
/* Add new entry or lookup existing entry */
/* Check if opcode had an associated namespace object */
if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
-#ifndef ACPI_NO_METHOD_EXECUTION
-#ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
- /* No namespace object. Executable opcode? */
-
- if ((walk_state->op_info->class == AML_CLASS_EXECUTE) ||
- (walk_state->op_info->class == AML_CLASS_CONTROL)) {
- ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
- "End/EXEC: %s (fl %8.8X)\n",
- walk_state->op_info->name,
- walk_state->op_info->flags));
-
- /* Executing a type1 or type2 opcode outside of a method */
-
- status = acpi_ds_exec_end_op(walk_state);
- return_ACPI_STATUS(status);
- }
-#endif
-#endif
return_ACPI_STATUS(AE_OK);
}
/* Read the Status Register */
status =
- acpi_read(&status_reg,
- &gpe_register_info->status_address);
+ acpi_hw_read(&status_reg,
+ &gpe_register_info->status_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Read the Enable Register */
status =
- acpi_read(&enable_reg,
- &gpe_register_info->enable_address);
+ acpi_hw_read(&enable_reg,
+ &gpe_register_info->enable_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Disable all GPEs within this register */
- status = acpi_write(0x00, &this_register->enable_address);
+ status = acpi_hw_write(0x00, &this_register->enable_address);
if (ACPI_FAILURE(status)) {
goto error_exit;
}
/* Clear any pending GPE events within this register */
- status = acpi_write(0xFF, &this_register->status_address);
+ status = acpi_hw_write(0xFF, &this_register->status_address);
if (ACPI_FAILURE(status)) {
goto error_exit;
}
ACPI_MODULE_NAME("evrgnini")
/* Local prototypes */
-static u8 acpi_ev_match_pci_root_bridge(char *id);
-
static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
/*******************************************************************************
/*******************************************************************************
*
- * FUNCTION: acpi_ev_match_pci_root_bridge
- *
- * PARAMETERS: Id - The HID/CID in string format
- *
- * RETURN: TRUE if the Id is a match for a PCI/PCI-Express Root Bridge
- *
- * DESCRIPTION: Determine if the input ID is a PCI Root Bridge ID.
- *
- ******************************************************************************/
-
-static u8 acpi_ev_match_pci_root_bridge(char *id)
-{
-
- /*
- * Check if this is a PCI root.
- * ACPI 3.0+: check for a PCI Express root also.
- */
- if (!(ACPI_STRNCMP(id,
- PCI_ROOT_HID_STRING,
- sizeof(PCI_ROOT_HID_STRING))) ||
- !(ACPI_STRNCMP(id,
- PCI_EXPRESS_ROOT_HID_STRING,
- sizeof(PCI_EXPRESS_ROOT_HID_STRING)))) {
- return (TRUE);
- }
-
- return (FALSE);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ev_is_pci_root_bridge
*
* PARAMETERS: Node - Device node being examined
static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
{
acpi_status status;
- struct acpica_device_id hid;
- struct acpi_compatible_id_list *cid;
+ struct acpica_device_id *hid;
+ struct acpica_device_id_list *cid;
u32 i;
+ u8 match;
/* Get the _HID and check for a PCI Root Bridge */
return (FALSE);
}
- if (acpi_ev_match_pci_root_bridge(hid.value)) {
+ match = acpi_ut_is_pci_root_bridge(hid->string);
+ ACPI_FREE(hid);
+
+ if (match) {
return (TRUE);
}
/* Check all _CIDs in the returned list */
for (i = 0; i < cid->count; i++) {
- if (acpi_ev_match_pci_root_bridge(cid->id[i].value)) {
+ if (acpi_ut_is_pci_root_bridge(cid->ids[i].string)) {
ACPI_FREE(cid);
return (TRUE);
}
if (ACPI_FAILURE(status)) {
acpi_ut_remove_reference(obj_desc);
*ddb_handle = NULL;
+ return_ACPI_STATUS(status);
}
+ /* Execute any module-level code that was found in the table */
+
+ acpi_ex_exit_interpreter();
+ acpi_ns_exec_module_code_list();
+ acpi_ex_enter_interpreter();
+
return_ACPI_STATUS(status);
}
case ACPI_EXD_REFERENCE:
acpi_ex_out_string("Class Name",
- (char *)
- acpi_ut_get_reference_name
- (obj_desc));
+ ACPI_CAST_PTR(char,
+ acpi_ut_get_reference_name
+ (obj_desc)));
acpi_ex_dump_reference_obj(obj_desc);
break;
union acpi_operand_object *buffer_desc;
acpi_size length;
void *buffer;
+ u32 function;
ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc);
}
} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
(obj_desc->field.region_obj->region.space_id ==
- ACPI_ADR_SPACE_SMBUS)) {
+ ACPI_ADR_SPACE_SMBUS
+ || obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_IPMI)) {
/*
- * This is an SMBus read. We must create a buffer to hold the data
- * and directly access the region handler.
+ * This is an SMBus or IPMI read. We must create a buffer to hold
+ * the data and then directly access the region handler.
+ *
+ * Note: Smbus protocol value is passed in upper 16-bits of Function
*/
- buffer_desc =
- acpi_ut_create_buffer_object(ACPI_SMBUS_BUFFER_SIZE);
+ if (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_SMBUS) {
+ length = ACPI_SMBUS_BUFFER_SIZE;
+ function =
+ ACPI_READ | (obj_desc->field.attribute << 16);
+ } else { /* IPMI */
+
+ length = ACPI_IPMI_BUFFER_SIZE;
+ function = ACPI_READ;
+ }
+
+ buffer_desc = acpi_ut_create_buffer_object(length);
if (!buffer_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags);
- /*
- * Perform the read.
- * Note: Smbus protocol value is passed in upper 16-bits of Function
- */
+ /* Call the region handler for the read */
+
status = acpi_ex_access_region(obj_desc, 0,
ACPI_CAST_PTR(acpi_integer,
buffer_desc->
buffer.pointer),
- ACPI_READ | (obj_desc->field.
- attribute << 16));
+ function);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
goto exit;
}
u32 length;
void *buffer;
union acpi_operand_object *buffer_desc;
+ u32 function;
ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc);
}
} else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) &&
(obj_desc->field.region_obj->region.space_id ==
- ACPI_ADR_SPACE_SMBUS)) {
+ ACPI_ADR_SPACE_SMBUS
+ || obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_IPMI)) {
/*
- * This is an SMBus write. We will bypass the entire field mechanism
- * and handoff the buffer directly to the handler.
+ * This is an SMBus or IPMI write. We will bypass the entire field
+ * mechanism and handoff the buffer directly to the handler. For
+ * these address spaces, the buffer is bi-directional; on a write,
+ * return data is returned in the same buffer.
+ *
+ * Source must be a buffer of sufficient size:
+ * ACPI_SMBUS_BUFFER_SIZE or ACPI_IPMI_BUFFER_SIZE.
*
- * Source must be a buffer of sufficient size (ACPI_SMBUS_BUFFER_SIZE).
+ * Note: SMBus protocol type is passed in upper 16-bits of Function
*/
if (source_desc->common.type != ACPI_TYPE_BUFFER) {
ACPI_ERROR((AE_INFO,
- "SMBus write requires Buffer, found type %s",
+ "SMBus or IPMI write requires Buffer, found type %s",
acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
- if (source_desc->buffer.length < ACPI_SMBUS_BUFFER_SIZE) {
+ if (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_SMBUS) {
+ length = ACPI_SMBUS_BUFFER_SIZE;
+ function =
+ ACPI_WRITE | (obj_desc->field.attribute << 16);
+ } else { /* IPMI */
+
+ length = ACPI_IPMI_BUFFER_SIZE;
+ function = ACPI_WRITE;
+ }
+
+ if (source_desc->buffer.length < length) {
ACPI_ERROR((AE_INFO,
- "SMBus write requires Buffer of length %X, found length %X",
- ACPI_SMBUS_BUFFER_SIZE,
- source_desc->buffer.length));
+ "SMBus or IPMI write requires Buffer of length %X, found length %X",
+ length, source_desc->buffer.length));
return_ACPI_STATUS(AE_AML_BUFFER_LIMIT);
}
- buffer_desc =
- acpi_ut_create_buffer_object(ACPI_SMBUS_BUFFER_SIZE);
+ /* Create the bi-directional buffer */
+
+ buffer_desc = acpi_ut_create_buffer_object(length);
if (!buffer_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
buffer = buffer_desc->buffer.pointer;
- ACPI_MEMCPY(buffer, source_desc->buffer.pointer,
- ACPI_SMBUS_BUFFER_SIZE);
+ ACPI_MEMCPY(buffer, source_desc->buffer.pointer, length);
/* Lock entire transaction if requested */
/*
* Perform the write (returns status and perhaps data in the
* same buffer)
- * Note: SMBus protocol type is passed in upper 16-bits of Function.
*/
status = acpi_ex_access_region(obj_desc, 0,
(acpi_integer *) buffer,
- ACPI_WRITE | (obj_desc->field.
- attribute << 16));
+ function);
acpi_ex_release_global_lock(obj_desc->common_field.field_flags);
*result_desc = buffer_desc;
}
/*
- * Exit now for SMBus address space, it has a non-linear address space
+ * Exit now for SMBus or IPMI address space, it has a non-linear address space
* and the request cannot be directly validated
*/
- if (rgn_desc->region.space_id == ACPI_ADR_SPACE_SMBUS) {
+ if (rgn_desc->region.space_id == ACPI_ADR_SPACE_SMBUS ||
+ rgn_desc->region.space_id == ACPI_ADR_SPACE_IPMI) {
- /* SMBus has a non-linear address space */
+ /* SMBus or IPMI has a non-linear address space */
return_ACPI_STATUS(AE_OK);
}
*
* FUNCTION: acpi_ex_eisa_id_to_string
*
- * PARAMETERS: numeric_id - EISA ID to be converted
+ * PARAMETERS: compressed_id - EISAID to be converted
* out_string - Where to put the converted string (8 bytes)
*
* RETURN: None
*
- * DESCRIPTION: Convert a numeric EISA ID to string representation
+ * DESCRIPTION: Convert a numeric EISAID to string representation. Return
+ * buffer must be large enough to hold the string. The string
+ * returned is always exactly of length ACPI_EISAID_STRING_SIZE
+ * (includes null terminator). The EISAID is always 32 bits.
*
******************************************************************************/
-void acpi_ex_eisa_id_to_string(u32 numeric_id, char *out_string)
+void acpi_ex_eisa_id_to_string(char *out_string, acpi_integer compressed_id)
{
- u32 eisa_id;
+ u32 swapped_id;
ACPI_FUNCTION_ENTRY();
+ /* The EISAID should be a 32-bit integer */
+
+ if (compressed_id > ACPI_UINT32_MAX) {
+ ACPI_WARNING((AE_INFO,
+ "Expected EISAID is larger than 32 bits: 0x%8.8X%8.8X, truncating",
+ ACPI_FORMAT_UINT64(compressed_id)));
+ }
+
/* Swap ID to big-endian to get contiguous bits */
- eisa_id = acpi_ut_dword_byte_swap(numeric_id);
+ swapped_id = acpi_ut_dword_byte_swap((u32)compressed_id);
- out_string[0] = (char)('@' + (((unsigned long)eisa_id >> 26) & 0x1f));
- out_string[1] = (char)('@' + ((eisa_id >> 21) & 0x1f));
- out_string[2] = (char)('@' + ((eisa_id >> 16) & 0x1f));
- out_string[3] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 12);
- out_string[4] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 8);
- out_string[5] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 4);
- out_string[6] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 0);
+ /* First 3 bytes are uppercase letters. Next 4 bytes are hexadecimal */
+
+ out_string[0] =
+ (char)(0x40 + (((unsigned long)swapped_id >> 26) & 0x1F));
+ out_string[1] = (char)(0x40 + ((swapped_id >> 21) & 0x1F));
+ out_string[2] = (char)(0x40 + ((swapped_id >> 16) & 0x1F));
+ out_string[3] = acpi_ut_hex_to_ascii_char((acpi_integer)swapped_id, 12);
+ out_string[4] = acpi_ut_hex_to_ascii_char((acpi_integer)swapped_id, 8);
+ out_string[5] = acpi_ut_hex_to_ascii_char((acpi_integer)swapped_id, 4);
+ out_string[6] = acpi_ut_hex_to_ascii_char((acpi_integer)swapped_id, 0);
out_string[7] = 0;
}
/*******************************************************************************
*
- * FUNCTION: acpi_ex_unsigned_integer_to_string
+ * FUNCTION: acpi_ex_integer_to_string
*
- * PARAMETERS: Value - Value to be converted
- * out_string - Where to put the converted string (8 bytes)
+ * PARAMETERS: out_string - Where to put the converted string. At least
+ * 21 bytes are needed to hold the largest
+ * possible 64-bit integer.
+ * Value - Value to be converted
*
* RETURN: None, string
*
- * DESCRIPTION: Convert a number to string representation. Assumes string
- * buffer is large enough to hold the string.
+ * DESCRIPTION: Convert a 64-bit integer to decimal string representation.
+ * Assumes string buffer is large enough to hold the string. The
+ * largest string is (ACPI_MAX64_DECIMAL_DIGITS + 1).
*
******************************************************************************/
-void acpi_ex_unsigned_integer_to_string(acpi_integer value, char *out_string)
+void acpi_ex_integer_to_string(char *out_string, acpi_integer value)
{
u32 count;
u32 digits_needed;
/* Get current value of the enable register that contains this GPE */
- status = acpi_read(&enable_mask, &gpe_register_info->enable_address);
+ status = acpi_hw_read(&enable_mask, &gpe_register_info->enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Write the updated enable mask */
- status = acpi_write(enable_mask, &gpe_register_info->enable_address);
+ status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
return (status);
}
/* Write the entire GPE (runtime) enable register */
- status = acpi_write(gpe_register_info->enable_for_run,
- &gpe_register_info->enable_address);
+ status = acpi_hw_write(gpe_register_info->enable_for_run,
+ &gpe_register_info->enable_address);
return (status);
}
* Write a one to the appropriate bit in the status register to
* clear this GPE.
*/
- status = acpi_write(register_bit,
- &gpe_event_info->register_info->status_address);
+ status = acpi_hw_write(register_bit,
+ &gpe_event_info->register_info->status_address);
return (status);
}
/* GPE currently active (status bit == 1)? */
- status = acpi_read(&in_byte, &gpe_register_info->status_address);
+ status = acpi_hw_read(&in_byte, &gpe_register_info->status_address);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Disable all GPEs in this register */
status =
- acpi_write(0x00,
- &gpe_block->register_info[i].enable_address);
+ acpi_hw_write(0x00,
+ &gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Clear status on all GPEs in this register */
status =
- acpi_write(0xFF,
- &gpe_block->register_info[i].status_address);
+ acpi_hw_write(0xFF,
+ &gpe_block->register_info[i].status_address);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Enable all "runtime" GPEs in this register */
- status = acpi_write(gpe_block->register_info[i].enable_for_run,
- &gpe_block->register_info[i].
- enable_address);
+ status =
+ acpi_hw_write(gpe_block->register_info[i].enable_for_run,
+ &gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Enable all "wake" GPEs in this register */
- status = acpi_write(gpe_block->register_info[i].enable_for_wake,
- &gpe_block->register_info[i].
- enable_address);
+ status =
+ acpi_hw_write(gpe_block->register_info[i].enable_for_wake,
+ &gpe_block->register_info[i].enable_address);
if (ACPI_FAILURE(status)) {
return (status);
}
struct acpi_generic_address *register_a,
struct acpi_generic_address *register_b);
+/******************************************************************************
+ *
+ * FUNCTION: acpi_hw_validate_register
+ *
+ * PARAMETERS: Reg - GAS register structure
+ * max_bit_width - Max bit_width supported (32 or 64)
+ * Address - Pointer to where the gas->address
+ * is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Validate the contents of a GAS register. Checks the GAS
+ * pointer, Address, space_id, bit_width, and bit_offset.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_hw_validate_register(struct acpi_generic_address *reg,
+ u8 max_bit_width, u64 *address)
+{
+
+ /* Must have a valid pointer to a GAS structure */
+
+ if (!reg) {
+ return (AE_BAD_PARAMETER);
+ }
+
+ /*
+ * Copy the target address. This handles possible alignment issues.
+ * Address must not be null. A null address also indicates an optional
+ * ACPI register that is not supported, so no error message.
+ */
+ ACPI_MOVE_64_TO_64(address, ®->address);
+ if (!(*address)) {
+ return (AE_BAD_ADDRESS);
+ }
+
+ /* Validate the space_iD */
+
+ if ((reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
+ (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
+ ACPI_ERROR((AE_INFO,
+ "Unsupported address space: 0x%X", reg->space_id));
+ return (AE_SUPPORT);
+ }
+
+ /* Validate the bit_width */
+
+ if ((reg->bit_width != 8) &&
+ (reg->bit_width != 16) &&
+ (reg->bit_width != 32) && (reg->bit_width != max_bit_width)) {
+ ACPI_ERROR((AE_INFO,
+ "Unsupported register bit width: 0x%X",
+ reg->bit_width));
+ return (AE_SUPPORT);
+ }
+
+ /* Validate the bit_offset. Just a warning for now. */
+
+ if (reg->bit_offset != 0) {
+ ACPI_WARNING((AE_INFO,
+ "Unsupported register bit offset: 0x%X",
+ reg->bit_offset));
+ }
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_hw_read
+ *
+ * PARAMETERS: Value - Where the value is returned
+ * Reg - GAS register structure
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Read from either memory or IO space. This is a 32-bit max
+ * version of acpi_read, used internally since the overhead of
+ * 64-bit values is not needed.
+ *
+ * LIMITATIONS: <These limitations also apply to acpi_hw_write>
+ * bit_width must be exactly 8, 16, or 32.
+ * space_iD must be system_memory or system_iO.
+ * bit_offset and access_width are currently ignored, as there has
+ * not been a need to implement these.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
+{
+ u64 address;
+ acpi_status status;
+
+ ACPI_FUNCTION_NAME(hw_read);
+
+ /* Validate contents of the GAS register */
+
+ status = acpi_hw_validate_register(reg, 32, &address);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Initialize entire 32-bit return value to zero */
+
+ *value = 0;
+
+ /*
+ * Two address spaces supported: Memory or IO. PCI_Config is
+ * not supported here because the GAS structure is insufficient
+ */
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ status = acpi_os_read_memory((acpi_physical_address)
+ address, value, reg->bit_width);
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
+
+ status = acpi_hw_read_port((acpi_io_address)
+ address, value, reg->bit_width);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n",
+ *value, reg->bit_width, ACPI_FORMAT_UINT64(address),
+ acpi_ut_get_region_name(reg->space_id)));
+
+ return (status);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_hw_write
+ *
+ * PARAMETERS: Value - Value to be written
+ * Reg - GAS register structure
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Write to either memory or IO space. This is a 32-bit max
+ * version of acpi_write, used internally since the overhead of
+ * 64-bit values is not needed.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg)
+{
+ u64 address;
+ acpi_status status;
+
+ ACPI_FUNCTION_NAME(hw_write);
+
+ /* Validate contents of the GAS register */
+
+ status = acpi_hw_validate_register(reg, 32, &address);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /*
+ * Two address spaces supported: Memory or IO. PCI_Config is
+ * not supported here because the GAS structure is insufficient
+ */
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ status = acpi_os_write_memory((acpi_physical_address)
+ address, value, reg->bit_width);
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
+
+ status = acpi_hw_write_port((acpi_io_address)
+ address, value, reg->bit_width);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n",
+ value, reg->bit_width, ACPI_FORMAT_UINT64(address),
+ acpi_ut_get_region_name(reg->space_id)));
+
+ return (status);
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_hw_clear_acpi_status
ACPI_FUNCTION_TRACE(hw_write_pm1_control);
- status = acpi_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block);
+ status =
+ acpi_hw_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (acpi_gbl_FADT.xpm1b_control_block.address) {
status =
- acpi_write(pm1b_control,
- &acpi_gbl_FADT.xpm1b_control_block);
+ acpi_hw_write(pm1b_control,
+ &acpi_gbl_FADT.xpm1b_control_block);
}
return_ACPI_STATUS(status);
}
case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */
- status = acpi_read(&value, &acpi_gbl_FADT.xpm2_control_block);
+ status =
+ acpi_hw_read(&value, &acpi_gbl_FADT.xpm2_control_block);
break;
case ACPI_REGISTER_PM_TIMER: /* 32-bit access */
- status = acpi_read(&value, &acpi_gbl_FADT.xpm_timer_block);
+ status = acpi_hw_read(&value, &acpi_gbl_FADT.xpm_timer_block);
break;
case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */
* as per the ACPI spec.
*/
status =
- acpi_read(&read_value, &acpi_gbl_FADT.xpm2_control_block);
+ acpi_hw_read(&read_value,
+ &acpi_gbl_FADT.xpm2_control_block);
if (ACPI_FAILURE(status)) {
goto exit;
}
ACPI_INSERT_BITS(value, ACPI_PM2_CONTROL_PRESERVED_BITS,
read_value);
- status = acpi_write(value, &acpi_gbl_FADT.xpm2_control_block);
+ status =
+ acpi_hw_write(value, &acpi_gbl_FADT.xpm2_control_block);
break;
case ACPI_REGISTER_PM_TIMER: /* 32-bit access */
- status = acpi_write(value, &acpi_gbl_FADT.xpm_timer_block);
+ status = acpi_hw_write(value, &acpi_gbl_FADT.xpm_timer_block);
break;
case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */
/* The first register is always required */
- status = acpi_read(&value_a, register_a);
+ status = acpi_hw_read(&value_a, register_a);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Second register is optional */
if (register_b->address) {
- status = acpi_read(&value_b, register_b);
+ status = acpi_hw_read(&value_b, register_b);
if (ACPI_FAILURE(status)) {
return (status);
}
/* The first register is always required */
- status = acpi_write(value, register_a);
+ status = acpi_hw_write(value, register_a);
if (ACPI_FAILURE(status)) {
return (status);
}
* and writes have no side effects"
*/
if (register_b->address) {
- status = acpi_write(value, register_b);
+ status = acpi_hw_write(value, register_b);
}
return (status);
}
status =
- acpi_hw_low_level_read(32, ticks, &acpi_gbl_FADT.xpm_timer_block);
+ acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
return_ACPI_STATUS(status);
}
return_ACPI_STATUS(AE_NOT_EXIST);
}
- /* Write the reset value to the reset register */
+ if (reset_reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+ /*
+ * For I/O space, write directly to the OSL. This bypasses the port
+ * validation mechanism, which may block a valid write to the reset
+ * register.
+ */
+ status =
+ acpi_os_write_port((acpi_io_address) reset_reg->address,
+ acpi_gbl_FADT.reset_value,
+ reset_reg->bit_width);
+ } else {
+ /* Write the reset value to the reset register */
+
+ status = acpi_hw_write(acpi_gbl_FADT.reset_value, reset_reg);
+ }
- status = acpi_write(acpi_gbl_FADT.reset_value, reset_reg);
return_ACPI_STATUS(status);
}
*
* DESCRIPTION: Read from either memory or IO space.
*
+ * LIMITATIONS: <These limitations also apply to acpi_write>
+ * bit_width must be exactly 8, 16, 32, or 64.
+ * space_iD must be system_memory or system_iO.
+ * bit_offset and access_width are currently ignored, as there has
+ * not been a need to implement these.
+ *
******************************************************************************/
-acpi_status acpi_read(u32 *value, struct acpi_generic_address *reg)
+acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
{
+ u32 value;
u32 width;
u64 address;
acpi_status status;
ACPI_FUNCTION_NAME(acpi_read);
- /*
- * Must have a valid pointer to a GAS structure, and a non-zero address
- * within.
- */
- if (!reg) {
+ if (!return_value) {
return (AE_BAD_PARAMETER);
}
- /* Get a local copy of the address. Handles possible alignment issues */
+ /* Validate contents of the GAS register. Allow 64-bit transfers */
- ACPI_MOVE_64_TO_64(&address, ®->address);
- if (!address) {
- return (AE_BAD_ADDRESS);
+ status = acpi_hw_validate_register(reg, 64, &address);
+ if (ACPI_FAILURE(status)) {
+ return (status);
}
- /* Supported widths are 8/16/32 */
-
width = reg->bit_width;
- if ((width != 8) && (width != 16) && (width != 32)) {
- return (AE_SUPPORT);
+ if (width == 64) {
+ width = 32; /* Break into two 32-bit transfers */
}
- /* Initialize entire 32-bit return value to zero */
+ /* Initialize entire 64-bit return value to zero */
- *value = 0;
+ *return_value = 0;
+ value = 0;
/*
* Two address spaces supported: Memory or IO. PCI_Config is
* not supported here because the GAS structure is insufficient
*/
- switch (reg->space_id) {
- case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ status = acpi_os_read_memory((acpi_physical_address)
+ address, &value, width);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ *return_value = value;
- status = acpi_os_read_memory((acpi_physical_address) address,
- value, width);
- break;
+ if (reg->bit_width == 64) {
- case ACPI_ADR_SPACE_SYSTEM_IO:
+ /* Read the top 32 bits */
- status =
- acpi_hw_read_port((acpi_io_address) address, value, width);
- break;
+ status = acpi_os_read_memory((acpi_physical_address)
+ (address + 4), &value, 32);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ *return_value |= ((u64)value << 32);
+ }
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
- default:
- ACPI_ERROR((AE_INFO,
- "Unsupported address space: %X", reg->space_id));
- return (AE_BAD_PARAMETER);
+ status = acpi_hw_read_port((acpi_io_address)
+ address, &value, width);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ *return_value = value;
+
+ if (reg->bit_width == 64) {
+
+ /* Read the top 32 bits */
+
+ status = acpi_hw_read_port((acpi_io_address)
+ (address + 4), &value, 32);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ *return_value |= ((u64)value << 32);
+ }
}
ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n",
- *value, width, ACPI_FORMAT_UINT64(address),
+ "Read: %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n",
+ ACPI_FORMAT_UINT64(*return_value), reg->bit_width,
+ ACPI_FORMAT_UINT64(address),
acpi_ut_get_region_name(reg->space_id)));
return (status);
*
* FUNCTION: acpi_write
*
- * PARAMETERS: Value - To be written
+ * PARAMETERS: Value - Value to be written
* Reg - GAS register structure
*
* RETURN: Status
* DESCRIPTION: Write to either memory or IO space.
*
******************************************************************************/
-acpi_status acpi_write(u32 value, struct acpi_generic_address *reg)
+acpi_status acpi_write(u64 value, struct acpi_generic_address *reg)
{
u32 width;
u64 address;
ACPI_FUNCTION_NAME(acpi_write);
- /*
- * Must have a valid pointer to a GAS structure, and a non-zero address
- * within.
- */
- if (!reg) {
- return (AE_BAD_PARAMETER);
- }
-
- /* Get a local copy of the address. Handles possible alignment issues */
+ /* Validate contents of the GAS register. Allow 64-bit transfers */
- ACPI_MOVE_64_TO_64(&address, ®->address);
- if (!address) {
- return (AE_BAD_ADDRESS);
+ status = acpi_hw_validate_register(reg, 64, &address);
+ if (ACPI_FAILURE(status)) {
+ return (status);
}
- /* Supported widths are 8/16/32 */
-
width = reg->bit_width;
- if ((width != 8) && (width != 16) && (width != 32)) {
- return (AE_SUPPORT);
+ if (width == 64) {
+ width = 32; /* Break into two 32-bit transfers */
}
/*
- * Two address spaces supported: Memory or IO.
- * PCI_Config is not supported here because the GAS struct is insufficient
+ * Two address spaces supported: Memory or IO. PCI_Config is
+ * not supported here because the GAS structure is insufficient
*/
- switch (reg->space_id) {
- case ACPI_ADR_SPACE_SYSTEM_MEMORY:
-
- status = acpi_os_write_memory((acpi_physical_address) address,
- value, width);
- break;
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ status = acpi_os_write_memory((acpi_physical_address)
+ address, ACPI_LODWORD(value),
+ width);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
- case ACPI_ADR_SPACE_SYSTEM_IO:
+ if (reg->bit_width == 64) {
+ status = acpi_os_write_memory((acpi_physical_address)
+ (address + 4),
+ ACPI_HIDWORD(value), 32);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
+ } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
- status = acpi_hw_write_port((acpi_io_address) address, value,
+ status = acpi_hw_write_port((acpi_io_address)
+ address, ACPI_LODWORD(value),
width);
- break;
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
- default:
- ACPI_ERROR((AE_INFO,
- "Unsupported address space: %X", reg->space_id));
- return (AE_BAD_PARAMETER);
+ if (reg->bit_width == 64) {
+ status = acpi_hw_write_port((acpi_io_address)
+ (address + 4),
+ ACPI_HIDWORD(value), 32);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ }
}
ACPI_DEBUG_PRINT((ACPI_DB_IO,
- "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n",
- value, width, ACPI_FORMAT_UINT64(address),
+ "Wrote: %8.8X%8.8X width %2d to %8.8X%8.8X (%s)\n",
+ ACPI_FORMAT_UINT64(value), reg->bit_width,
+ ACPI_FORMAT_UINT64(address),
acpi_ut_get_region_name(reg->space_id)));
return (status);
*
* RETURN: None
*
- * DESCRIPTION: Delete a namespace node
+ * DESCRIPTION: Delete a namespace node. All node deletions must come through
+ * here. Detaches any attached objects, including any attached
+ * data. If a handler is associated with attached data, it is
+ * invoked before the node is deleted.
*
******************************************************************************/
void acpi_ns_delete_node(struct acpi_namespace_node *node)
{
+ union acpi_operand_object *obj_desc;
+
+ ACPI_FUNCTION_NAME(ns_delete_node);
+
+ /* Detach an object if there is one */
+
+ acpi_ns_detach_object(node);
+
+ /*
+ * Delete an attached data object if present (an object that was created
+ * and attached via acpi_attach_data). Note: After any normal object is
+ * detached above, the only possible remaining object is a data object.
+ */
+ obj_desc = node->object;
+ if (obj_desc && (obj_desc->common.type == ACPI_TYPE_LOCAL_DATA)) {
+
+ /* Invoke the attached data deletion handler if present */
+
+ if (obj_desc->data.handler) {
+ obj_desc->data.handler(node, obj_desc->data.pointer);
+ }
+
+ acpi_ut_remove_reference(obj_desc);
+ }
+
+ /* Now we can delete the node */
+
+ (void)acpi_os_release_object(acpi_gbl_namespace_cache, node);
+
+ ACPI_MEM_TRACKING(acpi_gbl_ns_node_list->total_freed++);
+ ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Node %p, Remaining %X\n",
+ node, acpi_gbl_current_node_count));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_remove_node
+ *
+ * PARAMETERS: Node - Node to be removed/deleted
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Remove (unlink) and delete a namespace node
+ *
+ ******************************************************************************/
+
+void acpi_ns_remove_node(struct acpi_namespace_node *node)
+{
struct acpi_namespace_node *parent_node;
struct acpi_namespace_node *prev_node;
struct acpi_namespace_node *next_node;
- ACPI_FUNCTION_TRACE_PTR(ns_delete_node, node);
+ ACPI_FUNCTION_TRACE_PTR(ns_remove_node, node);
parent_node = acpi_ns_get_parent_node(node);
}
}
- ACPI_MEM_TRACKING(acpi_gbl_ns_node_list->total_freed++);
-
- /* Detach an object if there is one, then delete the node */
+ /* Delete the node and any attached objects */
- acpi_ns_detach_object(node);
- (void)acpi_os_release_object(acpi_gbl_namespace_cache, node);
+ acpi_ns_delete_node(node);
return_VOID;
}
parent_node, child_node));
}
- /* Now we can free this child object */
-
- ACPI_MEM_TRACKING(acpi_gbl_ns_node_list->total_freed++);
-
- ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
- "Object %p, Remaining %X\n", child_node,
- acpi_gbl_current_node_count));
-
- /* Detach an object if there is one, then free the child node */
-
- acpi_ns_detach_object(child_node);
-
- /* Now we can delete the node */
-
- (void)acpi_os_release_object(acpi_gbl_namespace_cache,
- child_node);
-
- /* And move on to the next child in the list */
-
+ /*
+ * Delete this child node and move on to the next child in the list.
+ * No need to unlink the node since we are deleting the entire branch.
+ */
+ acpi_ns_delete_node(child_node);
child_node = next_node;
} while (!(flags & ANOBJ_END_OF_PEER_LIST));
if (deletion_node) {
acpi_ns_delete_children(deletion_node);
- acpi_ns_delete_node(deletion_node);
+ acpi_ns_remove_node(deletion_node);
deletion_node = NULL;
}
acpi_ns_dump_one_device(acpi_handle obj_handle,
u32 level, void *context, void **return_value)
{
- struct acpi_buffer buffer;
struct acpi_device_info *info;
acpi_status status;
u32 i;
status =
acpi_ns_dump_one_object(obj_handle, level, context, return_value);
- buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
- status = acpi_get_object_info(obj_handle, &buffer);
+ status = acpi_get_object_info(obj_handle, &info);
if (ACPI_SUCCESS(status)) {
- info = buffer.pointer;
for (i = 0; i < level; i++) {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_TABLES, " "));
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_TABLES,
" HID: %s, ADR: %8.8X%8.8X, Status: %X\n",
- info->hardware_id.value,
+ info->hardware_id.string,
ACPI_FORMAT_UINT64(info->address),
info->current_status));
ACPI_FREE(info);
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nseval")
+/* Local prototypes */
+static void
+acpi_ns_exec_module_code(union acpi_operand_object *method_obj,
+ struct acpi_evaluate_info *info);
+
/*******************************************************************************
*
* FUNCTION: acpi_ns_evaluate
* MUTEX: Locks interpreter
*
******************************************************************************/
+
acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info)
{
acpi_status status;
*/
return_ACPI_STATUS(status);
}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_exec_module_code_list
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None. Exceptions during method execution are ignored, since
+ * we cannot abort a table load.
+ *
+ * DESCRIPTION: Execute all elements of the global module-level code list.
+ * Each element is executed as a single control method.
+ *
+ ******************************************************************************/
+
+void acpi_ns_exec_module_code_list(void)
+{
+ union acpi_operand_object *prev;
+ union acpi_operand_object *next;
+ struct acpi_evaluate_info *info;
+ u32 method_count = 0;
+
+ ACPI_FUNCTION_TRACE(ns_exec_module_code_list);
+
+ /* Exit now if the list is empty */
+
+ next = acpi_gbl_module_code_list;
+ if (!next) {
+ return_VOID;
+ }
+
+ /* Allocate the evaluation information block */
+
+ info = ACPI_ALLOCATE(sizeof(struct acpi_evaluate_info));
+ if (!info) {
+ return_VOID;
+ }
+
+ /* Walk the list, executing each "method" */
+
+ while (next) {
+ prev = next;
+ next = next->method.mutex;
+
+ /* Clear the link field and execute the method */
+
+ prev->method.mutex = NULL;
+ acpi_ns_exec_module_code(prev, info);
+ method_count++;
+
+ /* Delete the (temporary) method object */
+
+ acpi_ut_remove_reference(prev);
+ }
+
+ ACPI_INFO((AE_INFO,
+ "Executed %u blocks of module-level executable AML code",
+ method_count));
+
+ ACPI_FREE(info);
+ acpi_gbl_module_code_list = NULL;
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_exec_module_code
+ *
+ * PARAMETERS: method_obj - Object container for the module-level code
+ * Info - Info block for method evaluation
+ *
+ * RETURN: None. Exceptions during method execution are ignored, since
+ * we cannot abort a table load.
+ *
+ * DESCRIPTION: Execute a control method containing a block of module-level
+ * executable AML code. The control method is temporarily
+ * installed to the root node, then evaluated.
+ *
+ ******************************************************************************/
+
+static void
+acpi_ns_exec_module_code(union acpi_operand_object *method_obj,
+ struct acpi_evaluate_info *info)
+{
+ union acpi_operand_object *root_obj;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ns_exec_module_code);
+
+ /* Initialize the evaluation information block */
+
+ ACPI_MEMSET(info, 0, sizeof(struct acpi_evaluate_info));
+ info->prefix_node = acpi_gbl_root_node;
+
+ /*
+ * Get the currently attached root object. Add a reference, because the
+ * ref count will be decreased when the method object is installed to
+ * the root node.
+ */
+ root_obj = acpi_ns_get_attached_object(acpi_gbl_root_node);
+ acpi_ut_add_reference(root_obj);
+
+ /* Install the method (module-level code) in the root node */
+
+ status = acpi_ns_attach_object(acpi_gbl_root_node, method_obj,
+ ACPI_TYPE_METHOD);
+ if (ACPI_FAILURE(status)) {
+ goto exit;
+ }
+
+ /* Execute the root node as a control method */
+
+ status = acpi_ns_evaluate(info);
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INIT, "Executed module-level code at %p\n",
+ method_obj->method.aml_start));
+
+ /* Detach the temporary method object */
+
+ acpi_ns_detach_object(acpi_gbl_root_node);
+
+ /* Restore the original root object */
+
+ status =
+ acpi_ns_attach_object(acpi_gbl_root_node, root_obj,
+ ACPI_TYPE_DEVICE);
+
+ exit:
+ acpi_ut_remove_reference(root_obj);
+ return_VOID;
+}
goto error_exit;
}
+ /*
+ * Execute the "global" _INI method that may appear at the root. This
+ * support is provided for Windows compatibility (Vista+) and is not
+ * part of the ACPI specification.
+ */
+ info.evaluate_info->prefix_node = acpi_gbl_root_node;
+ info.evaluate_info->pathname = METHOD_NAME__INI;
+ info.evaluate_info->parameters = NULL;
+ info.evaluate_info->flags = ACPI_IGNORE_RETURN_VALUE;
+
+ status = acpi_ns_evaluate(info.evaluate_info);
+ if (ACPI_SUCCESS(status)) {
+ info.num_INI++;
+ }
+
/* Walk namespace to execute all _INIs on present devices */
status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
/* Now delete the starting object, and we are done */
- acpi_ns_delete_node(child_handle);
-
+ acpi_ns_remove_node(child_handle);
return_ACPI_STATUS(AE_OK);
}
* POSSIBILITY OF SUCH DAMAGES.
*/
+#define ACPI_CREATE_PREDEFINED_TABLE
+
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
******************************************************************************/
/* Local prototypes */
static acpi_status
-acpi_ns_check_package(char *pathname,
- union acpi_operand_object **return_object_ptr,
- const union acpi_predefined_info *predefined);
+acpi_ns_check_package(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr);
+
+static acpi_status
+acpi_ns_check_package_list(struct acpi_predefined_data *data,
+ const union acpi_predefined_info *package,
+ union acpi_operand_object **elements, u32 count);
static acpi_status
-acpi_ns_check_package_elements(char *pathname,
+acpi_ns_check_package_elements(struct acpi_predefined_data *data,
union acpi_operand_object **elements,
u8 type1,
u32 count1,
u8 type2, u32 count2, u32 start_index);
static acpi_status
-acpi_ns_check_object_type(char *pathname,
+acpi_ns_check_object_type(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr,
u32 expected_btypes, u32 package_index);
static acpi_status
-acpi_ns_check_reference(char *pathname,
+acpi_ns_check_reference(struct acpi_predefined_data *data,
union acpi_operand_object *return_object);
-static acpi_status
-acpi_ns_repair_object(u32 expected_btypes,
- u32 package_index,
- union acpi_operand_object **return_object_ptr);
+static void acpi_ns_get_expected_types(char *buffer, u32 expected_btypes);
/*
* Names for the types that can be returned by the predefined objects.
"/Reference",
};
-#define ACPI_NOT_PACKAGE ACPI_UINT32_MAX
-
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_predefined_names
*
* PARAMETERS: Node - Namespace node for the method/object
+ * user_param_count - Number of parameters actually passed
+ * return_status - Status from the object evaluation
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
acpi_status status = AE_OK;
const union acpi_predefined_info *predefined;
char *pathname;
+ struct acpi_predefined_data *data;
/* Match the name for this method/object against the predefined list */
predefined = acpi_ns_check_for_predefined_name(node);
- /* Get the full pathname to the object, for use in error messages */
+ /* Get the full pathname to the object, for use in warning messages */
pathname = acpi_ns_get_external_pathname(node);
if (!pathname) {
/* If not a predefined name, we cannot validate the return object */
if (!predefined) {
- goto exit;
- }
-
- /* If the method failed, we cannot validate the return object */
-
- if ((return_status != AE_OK) && (return_status != AE_CTRL_RETURN_VALUE)) {
- goto exit;
+ goto cleanup;
}
/*
- * Only validate the return value on the first successful evaluation of
- * the method. This ensures that any warnings will only be emitted during
- * the very first evaluation of the method/object.
+ * If the method failed or did not actually return an object, we cannot
+ * validate the return object
*/
- if (node->flags & ANOBJ_EVALUATED) {
- goto exit;
+ if ((return_status != AE_OK) && (return_status != AE_CTRL_RETURN_VALUE)) {
+ goto cleanup;
}
- /* Mark the node as having been successfully evaluated */
-
- node->flags |= ANOBJ_EVALUATED;
-
/*
* If there is no return value, check if we require a return value for
* this predefined name. Either one return value is expected, or none,
if (!return_object) {
if ((predefined->info.expected_btypes) &&
(!(predefined->info.expected_btypes & ACPI_RTYPE_NONE))) {
- ACPI_ERROR((AE_INFO,
- "%s: Missing expected return value",
- pathname));
+ ACPI_WARN_PREDEFINED((AE_INFO, pathname,
+ ACPI_WARN_ALWAYS,
+ "Missing expected return value"));
status = AE_AML_NO_RETURN_VALUE;
}
- goto exit;
+ goto cleanup;
}
/*
- * We have a return value, but if one wasn't expected, just exit, this is
- * not a problem
+ * 1) We have a return value, but if one wasn't expected, just exit, this is
+ * not a problem. For example, if the "Implicit Return" feature is
+ * enabled, methods will always return a value.
*
- * For example, if the "Implicit Return" feature is enabled, methods will
- * always return a value
+ * 2) If the return value can be of any type, then we cannot perform any
+ * validation, exit.
*/
- if (!predefined->info.expected_btypes) {
- goto exit;
+ if ((!predefined->info.expected_btypes) ||
+ (predefined->info.expected_btypes == ACPI_RTYPE_ALL)) {
+ goto cleanup;
}
+ /* Create the parameter data block for object validation */
+
+ data = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_predefined_data));
+ if (!data) {
+ goto cleanup;
+ }
+ data->predefined = predefined;
+ data->node_flags = node->flags;
+ data->pathname = pathname;
+
/*
* Check that the type of the return object is what is expected for
* this predefined name
*/
- status = acpi_ns_check_object_type(pathname, return_object_ptr,
+ status = acpi_ns_check_object_type(data, return_object_ptr,
predefined->info.expected_btypes,
- ACPI_NOT_PACKAGE);
+ ACPI_NOT_PACKAGE_ELEMENT);
if (ACPI_FAILURE(status)) {
- goto exit;
+ goto check_validation_status;
}
/* For returned Package objects, check the type of all sub-objects */
if (return_object->common.type == ACPI_TYPE_PACKAGE) {
- status =
- acpi_ns_check_package(pathname, return_object_ptr,
- predefined);
+ status = acpi_ns_check_package(data, return_object_ptr);
+ }
+
+check_validation_status:
+ /*
+ * If the object validation failed or if we successfully repaired one
+ * or more objects, mark the parent node to suppress further warning
+ * messages during the next evaluation of the same method/object.
+ */
+ if (ACPI_FAILURE(status) || (data->flags & ACPI_OBJECT_REPAIRED)) {
+ node->flags |= ANOBJ_EVALUATED;
}
+ ACPI_FREE(data);
- exit:
+cleanup:
ACPI_FREE(pathname);
return (status);
}
param_count = node->object->method.param_count;
}
- /* Argument count check for non-predefined methods/objects */
-
if (!predefined) {
/*
+ * Check the parameter count for non-predefined methods/objects.
+ *
* Warning if too few or too many arguments have been passed by the
* caller. An incorrect number of arguments may not cause the method
* to fail. However, the method will fail if there are too few
* arguments and the method attempts to use one of the missing ones.
*/
if (user_param_count < param_count) {
- ACPI_WARNING((AE_INFO,
- "%s: Insufficient arguments - needs %d, found %d",
- pathname, param_count, user_param_count));
+ ACPI_WARN_PREDEFINED((AE_INFO, pathname,
+ ACPI_WARN_ALWAYS,
+ "Insufficient arguments - needs %u, found %u",
+ param_count, user_param_count));
} else if (user_param_count > param_count) {
- ACPI_WARNING((AE_INFO,
- "%s: Excess arguments - needs %d, found %d",
- pathname, param_count, user_param_count));
+ ACPI_WARN_PREDEFINED((AE_INFO, pathname,
+ ACPI_WARN_ALWAYS,
+ "Excess arguments - needs %u, found %u",
+ param_count, user_param_count));
}
return;
}
- /* Allow two different legal argument counts (_SCP, etc.) */
-
+ /*
+ * Validate the user-supplied parameter count.
+ * Allow two different legal argument counts (_SCP, etc.)
+ */
required_params_current = predefined->info.param_count & 0x0F;
required_params_old = predefined->info.param_count >> 4;
if (user_param_count != ACPI_UINT32_MAX) {
-
- /* Validate the user-supplied parameter count */
-
if ((user_param_count != required_params_current) &&
(user_param_count != required_params_old)) {
- ACPI_WARNING((AE_INFO,
- "%s: Parameter count mismatch - "
- "caller passed %d, ACPI requires %d",
- pathname, user_param_count,
- required_params_current));
+ ACPI_WARN_PREDEFINED((AE_INFO, pathname,
+ ACPI_WARN_ALWAYS,
+ "Parameter count mismatch - "
+ "caller passed %u, ACPI requires %u",
+ user_param_count,
+ required_params_current));
}
}
/*
- * Only validate the argument count on the first successful evaluation of
- * the method. This ensures that any warnings will only be emitted during
- * the very first evaluation of the method/object.
- */
- if (node->flags & ANOBJ_EVALUATED) {
- return;
- }
-
- /*
* Check that the ASL-defined parameter count is what is expected for
- * this predefined name.
+ * this predefined name (parameter count as defined by the ACPI
+ * specification)
*/
if ((param_count != required_params_current) &&
(param_count != required_params_old)) {
- ACPI_WARNING((AE_INFO,
- "%s: Parameter count mismatch - ASL declared %d, ACPI requires %d",
- pathname, param_count, required_params_current));
+ ACPI_WARN_PREDEFINED((AE_INFO, pathname, node->flags,
+ "Parameter count mismatch - ASL declared %u, ACPI requires %u",
+ param_count, required_params_current));
}
}
this_name = predefined_names;
while (this_name->info.name[0]) {
if (ACPI_COMPARE_NAME(node->name.ascii, this_name->info.name)) {
-
- /* Return pointer to this table entry */
-
return (this_name);
}
this_name++;
}
- return (NULL);
+ return (NULL); /* Not found */
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_check_package
*
- * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
+ * PARAMETERS: Data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
- * Predefined - Pointer to entry in predefined name table
*
* RETURN: Status
*
******************************************************************************/
static acpi_status
-acpi_ns_check_package(char *pathname,
- union acpi_operand_object **return_object_ptr,
- const union acpi_predefined_info *predefined)
+acpi_ns_check_package(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr)
{
union acpi_operand_object *return_object = *return_object_ptr;
const union acpi_predefined_info *package;
- union acpi_operand_object *sub_package;
union acpi_operand_object **elements;
- union acpi_operand_object **sub_elements;
- acpi_status status;
+ acpi_status status = AE_OK;
u32 expected_count;
u32 count;
u32 i;
- u32 j;
ACPI_FUNCTION_NAME(ns_check_package);
/* The package info for this name is in the next table entry */
- package = predefined + 1;
+ package = data->predefined + 1;
ACPI_DEBUG_PRINT((ACPI_DB_NAMES,
"%s Validating return Package of Type %X, Count %X\n",
- pathname, package->ret_info.type,
+ data->pathname, package->ret_info.type,
return_object->package.count));
/* Extract package count and elements array */
/* The package must have at least one element, else invalid */
if (!count) {
- ACPI_WARNING((AE_INFO,
- "%s: Return Package has no elements (empty)",
- pathname));
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Package has no elements (empty)"));
return (AE_AML_OPERAND_VALUE);
}
if (count < expected_count) {
goto package_too_small;
} else if (count > expected_count) {
- ACPI_WARNING((AE_INFO,
- "%s: Return Package is larger than needed - "
- "found %u, expected %u", pathname, count,
- expected_count));
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
+ data->node_flags,
+ "Return Package is larger than needed - "
+ "found %u, expected %u", count,
+ expected_count));
}
/* Validate all elements of the returned package */
- status = acpi_ns_check_package_elements(pathname, elements,
+ status = acpi_ns_check_package_elements(data, elements,
package->ret_info.
object_type1,
package->ret_info.
object_type2,
package->ret_info.
count2, 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
break;
case ACPI_PTYPE1_VAR:
* elements must be of the same type
*/
for (i = 0; i < count; i++) {
- status = acpi_ns_check_object_type(pathname, elements,
+ status = acpi_ns_check_object_type(data, elements,
package->ret_info.
object_type1, i);
if (ACPI_FAILURE(status)) {
/* These are the required package elements (0, 1, or 2) */
status =
- acpi_ns_check_object_type(pathname,
- elements,
+ acpi_ns_check_object_type(data, elements,
package->
ret_info3.
object_type[i],
/* These are the optional package elements */
status =
- acpi_ns_check_object_type(pathname,
- elements,
+ acpi_ns_check_object_type(data, elements,
package->
ret_info3.
tail_object_type,
}
break;
+ case ACPI_PTYPE2_REV_FIXED:
+
+ /* First element is the (Integer) revision */
+
+ status = acpi_ns_check_object_type(data, elements,
+ ACPI_RTYPE_INTEGER, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ elements++;
+ count--;
+
+ /* Examine the sub-packages */
+
+ status =
+ acpi_ns_check_package_list(data, package, elements, count);
+ break;
+
case ACPI_PTYPE2_PKG_COUNT:
/* First element is the (Integer) count of sub-packages to follow */
- status = acpi_ns_check_object_type(pathname, elements,
+ status = acpi_ns_check_object_type(data, elements,
ACPI_RTYPE_INTEGER, 0);
if (ACPI_FAILURE(status)) {
return (status);
count = expected_count;
elements++;
- /* Now we can walk the sub-packages */
+ /* Examine the sub-packages */
- /*lint -fallthrough */
+ status =
+ acpi_ns_check_package_list(data, package, elements, count);
+ break;
case ACPI_PTYPE2:
case ACPI_PTYPE2_FIXED:
case ACPI_PTYPE2_COUNT:
/*
- * These types all return a single package that consists of a variable
- * number of sub-packages
+ * These types all return a single Package that consists of a
+ * variable number of sub-Packages.
+ *
+ * First, ensure that the first element is a sub-Package. If not,
+ * the BIOS may have incorrectly returned the object as a single
+ * package instead of a Package of Packages (a common error if
+ * there is only one entry). We may be able to repair this by
+ * wrapping the returned Package with a new outer Package.
*/
- for (i = 0; i < count; i++) {
- sub_package = *elements;
- sub_elements = sub_package->package.elements;
+ if ((*elements)->common.type != ACPI_TYPE_PACKAGE) {
- /* Each sub-object must be of type Package */
+ /* Create the new outer package and populate it */
status =
- acpi_ns_check_object_type(pathname, &sub_package,
- ACPI_RTYPE_PACKAGE, i);
+ acpi_ns_repair_package_list(data,
+ return_object_ptr);
if (ACPI_FAILURE(status)) {
return (status);
}
- /* Examine the different types of sub-packages */
+ /* Update locals to point to the new package (of 1 element) */
- switch (package->ret_info.type) {
- case ACPI_PTYPE2:
- case ACPI_PTYPE2_PKG_COUNT:
+ return_object = *return_object_ptr;
+ elements = return_object->package.elements;
+ count = 1;
+ }
- /* Each subpackage has a fixed number of elements */
+ /* Examine the sub-packages */
- expected_count =
- package->ret_info.count1 +
- package->ret_info.count2;
- if (sub_package->package.count !=
- expected_count) {
- count = sub_package->package.count;
- goto package_too_small;
- }
+ status =
+ acpi_ns_check_package_list(data, package, elements, count);
+ break;
- status =
- acpi_ns_check_package_elements(pathname,
- sub_elements,
- package->
- ret_info.
- object_type1,
- package->
- ret_info.
- count1,
- package->
- ret_info.
- object_type2,
- package->
- ret_info.
- count2, 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- break;
+ default:
- case ACPI_PTYPE2_FIXED:
+ /* Should not get here if predefined info table is correct */
- /* Each sub-package has a fixed length */
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Invalid internal return type in table entry: %X",
+ package->ret_info.type));
- expected_count = package->ret_info2.count;
- if (sub_package->package.count < expected_count) {
- count = sub_package->package.count;
- goto package_too_small;
- }
+ return (AE_AML_INTERNAL);
+ }
- /* Check the type of each sub-package element */
+ return (status);
- for (j = 0; j < expected_count; j++) {
- status =
- acpi_ns_check_object_type(pathname,
- &sub_elements[j],
- package->ret_info2.object_type[j], j);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- }
- break;
+package_too_small:
- case ACPI_PTYPE2_MIN:
+ /* Error exit for the case with an incorrect package count */
- /* Each sub-package has a variable but minimum length */
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Package is too small - found %u elements, expected %u",
+ count, expected_count));
- expected_count = package->ret_info.count1;
- if (sub_package->package.count < expected_count) {
- count = sub_package->package.count;
- goto package_too_small;
- }
+ return (AE_AML_OPERAND_VALUE);
+}
- /* Check the type of each sub-package element */
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_check_package_list
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * Package - Pointer to package-specific info for method
+ * Elements - Element list of parent package. All elements
+ * of this list should be of type Package.
+ * Count - Count of subpackages
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Examine a list of subpackages
+ *
+ ******************************************************************************/
- status =
- acpi_ns_check_package_elements(pathname,
- sub_elements,
- package->
- ret_info.
- object_type1,
- sub_package->
- package.
- count, 0, 0,
- 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
- break;
+static acpi_status
+acpi_ns_check_package_list(struct acpi_predefined_data *data,
+ const union acpi_predefined_info *package,
+ union acpi_operand_object **elements, u32 count)
+{
+ union acpi_operand_object *sub_package;
+ union acpi_operand_object **sub_elements;
+ acpi_status status;
+ u32 expected_count;
+ u32 i;
+ u32 j;
- case ACPI_PTYPE2_COUNT:
+ /* Validate each sub-Package in the parent Package */
- /* First element is the (Integer) count of elements to follow */
+ for (i = 0; i < count; i++) {
+ sub_package = *elements;
+ sub_elements = sub_package->package.elements;
- status =
- acpi_ns_check_object_type(pathname,
- sub_elements,
- ACPI_RTYPE_INTEGER,
- 0);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
+ /* Each sub-object must be of type Package */
- /* Make sure package is large enough for the Count */
+ status = acpi_ns_check_object_type(data, &sub_package,
+ ACPI_RTYPE_PACKAGE, i);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
- expected_count =
- (u32) (*sub_elements)->integer.value;
- if (sub_package->package.count < expected_count) {
- count = sub_package->package.count;
- goto package_too_small;
- }
+ /* Examine the different types of expected sub-packages */
+
+ switch (package->ret_info.type) {
+ case ACPI_PTYPE2:
+ case ACPI_PTYPE2_PKG_COUNT:
+ case ACPI_PTYPE2_REV_FIXED:
+
+ /* Each subpackage has a fixed number of elements */
+
+ expected_count =
+ package->ret_info.count1 + package->ret_info.count2;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ status =
+ acpi_ns_check_package_elements(data, sub_elements,
+ package->ret_info.
+ object_type1,
+ package->ret_info.
+ count1,
+ package->ret_info.
+ object_type2,
+ package->ret_info.
+ count2, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
- /* Check the type of each sub-package element */
+ case ACPI_PTYPE2_FIXED:
+ /* Each sub-package has a fixed length */
+
+ expected_count = package->ret_info2.count;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+
+ /* Check the type of each sub-package element */
+
+ for (j = 0; j < expected_count; j++) {
status =
- acpi_ns_check_package_elements(pathname,
- (sub_elements
- + 1),
- package->
- ret_info.
- object_type1,
- (expected_count
- - 1), 0, 0,
- 1);
+ acpi_ns_check_object_type(data,
+ &sub_elements[j],
+ package->
+ ret_info2.
+ object_type[j],
+ j);
if (ACPI_FAILURE(status)) {
return (status);
}
- break;
+ }
+ break;
+
+ case ACPI_PTYPE2_MIN:
- default:
- break;
+ /* Each sub-package has a variable but minimum length */
+
+ expected_count = package->ret_info.count1;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
}
- elements++;
- }
- break;
+ /* Check the type of each sub-package element */
- default:
+ status =
+ acpi_ns_check_package_elements(data, sub_elements,
+ package->ret_info.
+ object_type1,
+ sub_package->package.
+ count, 0, 0, 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
- /* Should not get here if predefined info table is correct */
+ case ACPI_PTYPE2_COUNT:
+
+ /*
+ * First element is the (Integer) count of elements, including
+ * the count field.
+ */
+ status = acpi_ns_check_object_type(data, sub_elements,
+ ACPI_RTYPE_INTEGER,
+ 0);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
- ACPI_WARNING((AE_INFO,
- "%s: Invalid internal return type in table entry: %X",
- pathname, package->ret_info.type));
+ /*
+ * Make sure package is large enough for the Count and is
+ * is as large as the minimum size
+ */
+ expected_count = (u32)(*sub_elements)->integer.value;
+ if (sub_package->package.count < expected_count) {
+ goto package_too_small;
+ }
+ if (sub_package->package.count <
+ package->ret_info.count1) {
+ expected_count = package->ret_info.count1;
+ goto package_too_small;
+ }
- return (AE_AML_INTERNAL);
+ /* Check the type of each sub-package element */
+
+ status =
+ acpi_ns_check_package_elements(data,
+ (sub_elements + 1),
+ package->ret_info.
+ object_type1,
+ (expected_count - 1),
+ 0, 0, 1);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+ break;
+
+ default: /* Should not get here, type was validated by caller */
+
+ return (AE_AML_INTERNAL);
+ }
+
+ elements++;
}
return (AE_OK);
- package_too_small:
+package_too_small:
- /* Error exit for the case with an incorrect package count */
+ /* The sub-package count was smaller than required */
- ACPI_WARNING((AE_INFO, "%s: Return Package is too small - "
- "found %u, expected %u", pathname, count,
- expected_count));
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Sub-Package[%u] is too small - found %u elements, expected %u",
+ i, sub_package->package.count, expected_count));
return (AE_AML_OPERAND_VALUE);
}
*
* FUNCTION: acpi_ns_check_package_elements
*
- * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
+ * PARAMETERS: Data - Pointer to validation data structure
* Elements - Pointer to the package elements array
* Type1 - Object type for first group
* Count1 - Count for first group
******************************************************************************/
static acpi_status
-acpi_ns_check_package_elements(char *pathname,
+acpi_ns_check_package_elements(struct acpi_predefined_data *data,
union acpi_operand_object **elements,
u8 type1,
u32 count1,
* The second group can have a count of zero.
*/
for (i = 0; i < count1; i++) {
- status = acpi_ns_check_object_type(pathname, this_element,
+ status = acpi_ns_check_object_type(data, this_element,
type1, i + start_index);
if (ACPI_FAILURE(status)) {
return (status);
}
for (i = 0; i < count2; i++) {
- status = acpi_ns_check_object_type(pathname, this_element,
+ status = acpi_ns_check_object_type(data, this_element,
type2,
(i + count1 + start_index));
if (ACPI_FAILURE(status)) {
*
* FUNCTION: acpi_ns_check_object_type
*
- * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
+ * PARAMETERS: Data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
* expected_btypes - Bitmap of expected return type(s)
* package_index - Index of object within parent package (if
- * applicable - ACPI_NOT_PACKAGE otherwise)
+ * applicable - ACPI_NOT_PACKAGE_ELEMENT
+ * otherwise)
*
* RETURN: Status
*
******************************************************************************/
static acpi_status
-acpi_ns_check_object_type(char *pathname,
+acpi_ns_check_object_type(struct acpi_predefined_data *data,
union acpi_operand_object **return_object_ptr,
u32 expected_btypes, u32 package_index)
{
acpi_status status = AE_OK;
u32 return_btype;
char type_buffer[48]; /* Room for 5 types */
- u32 this_rtype;
- u32 i;
- u32 j;
/*
* If we get a NULL return_object here, it is a NULL package element,
/* A Namespace node should not get here, but make sure */
if (ACPI_GET_DESCRIPTOR_TYPE(return_object) == ACPI_DESC_TYPE_NAMED) {
- ACPI_WARNING((AE_INFO,
- "%s: Invalid return type - Found a Namespace node [%4.4s] type %s",
- pathname, return_object->node.name.ascii,
- acpi_ut_get_type_name(return_object->node.type)));
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Invalid return type - Found a Namespace node [%4.4s] type %s",
+ return_object->node.name.ascii,
+ acpi_ut_get_type_name(return_object->node.
+ type)));
return (AE_AML_OPERAND_TYPE);
}
/* Type mismatch -- attempt repair of the returned object */
- status = acpi_ns_repair_object(expected_btypes, package_index,
+ status = acpi_ns_repair_object(data, expected_btypes,
+ package_index,
return_object_ptr);
if (ACPI_SUCCESS(status)) {
- return (status);
+ return (AE_OK); /* Repair was successful */
}
goto type_error_exit;
}
/* For reference objects, check that the reference type is correct */
if (return_object->common.type == ACPI_TYPE_LOCAL_REFERENCE) {
- status = acpi_ns_check_reference(pathname, return_object);
+ status = acpi_ns_check_reference(data, return_object);
}
return (status);
/* Create a string with all expected types for this predefined object */
- j = 1;
- type_buffer[0] = 0;
- this_rtype = ACPI_RTYPE_INTEGER;
-
- for (i = 0; i < ACPI_NUM_RTYPES; i++) {
-
- /* If one of the expected types, concatenate the name of this type */
-
- if (expected_btypes & this_rtype) {
- ACPI_STRCAT(type_buffer, &acpi_rtype_names[i][j]);
- j = 0; /* Use name separator from now on */
- }
- this_rtype <<= 1; /* Next Rtype */
- }
+ acpi_ns_get_expected_types(type_buffer, expected_btypes);
- if (package_index == ACPI_NOT_PACKAGE) {
- ACPI_WARNING((AE_INFO,
- "%s: Return type mismatch - found %s, expected %s",
- pathname,
- acpi_ut_get_object_type_name(return_object),
- type_buffer));
+ if (package_index == ACPI_NOT_PACKAGE_ELEMENT) {
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return type mismatch - found %s, expected %s",
+ acpi_ut_get_object_type_name
+ (return_object), type_buffer));
} else {
- ACPI_WARNING((AE_INFO,
- "%s: Return Package type mismatch at index %u - "
- "found %s, expected %s", pathname, package_index,
- acpi_ut_get_object_type_name(return_object),
- type_buffer));
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return Package type mismatch at index %u - "
+ "found %s, expected %s", package_index,
+ acpi_ut_get_object_type_name
+ (return_object), type_buffer));
}
return (AE_AML_OPERAND_TYPE);
*
* FUNCTION: acpi_ns_check_reference
*
- * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
+ * PARAMETERS: Data - Pointer to validation data structure
* return_object - Object returned from the evaluation of a
* method or object
*
******************************************************************************/
static acpi_status
-acpi_ns_check_reference(char *pathname,
+acpi_ns_check_reference(struct acpi_predefined_data *data,
union acpi_operand_object *return_object)
{
return (AE_OK);
}
- ACPI_WARNING((AE_INFO,
- "%s: Return type mismatch - "
- "unexpected reference object type [%s] %2.2X",
- pathname, acpi_ut_get_reference_name(return_object),
- return_object->reference.class));
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Return type mismatch - unexpected reference object type [%s] %2.2X",
+ acpi_ut_get_reference_name(return_object),
+ return_object->reference.class));
return (AE_AML_OPERAND_TYPE);
}
/*******************************************************************************
*
- * FUNCTION: acpi_ns_repair_object
+ * FUNCTION: acpi_ns_get_expected_types
*
- * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
- * package_index - Used to determine if target is in a package
- * return_object_ptr - Pointer to the object returned from the
- * evaluation of a method or object
+ * PARAMETERS: Buffer - Pointer to where the string is returned
+ * expected_btypes - Bitmap of expected return type(s)
*
- * RETURN: Status. AE_OK if repair was successful.
+ * RETURN: Buffer is populated with type names.
*
- * DESCRIPTION: Attempt to repair/convert a return object of a type that was
- * not expected.
+ * DESCRIPTION: Translate the expected types bitmap into a string of ascii
+ * names of expected types, for use in warning messages.
*
******************************************************************************/
-static acpi_status
-acpi_ns_repair_object(u32 expected_btypes,
- u32 package_index,
- union acpi_operand_object **return_object_ptr)
+static void acpi_ns_get_expected_types(char *buffer, u32 expected_btypes)
{
- union acpi_operand_object *return_object = *return_object_ptr;
- union acpi_operand_object *new_object;
- acpi_size length;
-
- switch (return_object->common.type) {
- case ACPI_TYPE_BUFFER:
-
- if (!(expected_btypes & ACPI_RTYPE_STRING)) {
- return (AE_AML_OPERAND_TYPE);
- }
-
- /*
- * Have a Buffer, expected a String, convert. Use a to_string
- * conversion, no transform performed on the buffer data. The best
- * example of this is the _BIF method, where the string data from
- * the battery is often (incorrectly) returned as buffer object(s).
- */
- length = 0;
- while ((length < return_object->buffer.length) &&
- (return_object->buffer.pointer[length])) {
- length++;
- }
-
- /* Allocate a new string object */
-
- new_object = acpi_ut_create_string_object(length);
- if (!new_object) {
- return (AE_NO_MEMORY);
- }
+ u32 this_rtype;
+ u32 i;
+ u32 j;
- /*
- * Copy the raw buffer data with no transform. String is already NULL
- * terminated at Length+1.
- */
- ACPI_MEMCPY(new_object->string.pointer,
- return_object->buffer.pointer, length);
+ j = 1;
+ buffer[0] = 0;
+ this_rtype = ACPI_RTYPE_INTEGER;
- /* Install the new return object */
+ for (i = 0; i < ACPI_NUM_RTYPES; i++) {
- acpi_ut_remove_reference(return_object);
- *return_object_ptr = new_object;
+ /* If one of the expected types, concatenate the name of this type */
- /*
- * If the object is a package element, we need to:
- * 1. Decrement the reference count of the orignal object, it was
- * incremented when building the package
- * 2. Increment the reference count of the new object, it will be
- * decremented when releasing the package
- */
- if (package_index != ACPI_NOT_PACKAGE) {
- acpi_ut_remove_reference(return_object);
- acpi_ut_add_reference(new_object);
+ if (expected_btypes & this_rtype) {
+ ACPI_STRCAT(buffer, &acpi_rtype_names[i][j]);
+ j = 0; /* Use name separator from now on */
}
- return (AE_OK);
-
- default:
- break;
+ this_rtype <<= 1; /* Next Rtype */
}
-
- return (AE_AML_OPERAND_TYPE);
}
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: nsrepair - Repair for objects returned by predefined methods
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2009, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+#include "acpredef.h"
+
+#define _COMPONENT ACPI_NAMESPACE
+ACPI_MODULE_NAME("nsrepair")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_repair_object
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * expected_btypes - Object types expected
+ * package_index - Index of object within parent package (if
+ * applicable - ACPI_NOT_PACKAGE_ELEMENT
+ * otherwise)
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status. AE_OK if repair was successful.
+ *
+ * DESCRIPTION: Attempt to repair/convert a return object of a type that was
+ * not expected.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ns_repair_object(struct acpi_predefined_data *data,
+ u32 expected_btypes,
+ u32 package_index,
+ union acpi_operand_object **return_object_ptr)
+{
+ union acpi_operand_object *return_object = *return_object_ptr;
+ union acpi_operand_object *new_object;
+ acpi_size length;
+
+ switch (return_object->common.type) {
+ case ACPI_TYPE_BUFFER:
+
+ /* Does the method/object legally return a string? */
+
+ if (!(expected_btypes & ACPI_RTYPE_STRING)) {
+ return (AE_AML_OPERAND_TYPE);
+ }
+
+ /*
+ * Have a Buffer, expected a String, convert. Use a to_string
+ * conversion, no transform performed on the buffer data. The best
+ * example of this is the _BIF method, where the string data from
+ * the battery is often (incorrectly) returned as buffer object(s).
+ */
+ length = 0;
+ while ((length < return_object->buffer.length) &&
+ (return_object->buffer.pointer[length])) {
+ length++;
+ }
+
+ /* Allocate a new string object */
+
+ new_object = acpi_ut_create_string_object(length);
+ if (!new_object) {
+ return (AE_NO_MEMORY);
+ }
+
+ /*
+ * Copy the raw buffer data with no transform. String is already NULL
+ * terminated at Length+1.
+ */
+ ACPI_MEMCPY(new_object->string.pointer,
+ return_object->buffer.pointer, length);
+
+ /*
+ * If the original object is a package element, we need to:
+ * 1. Set the reference count of the new object to match the
+ * reference count of the old object.
+ * 2. Decrement the reference count of the original object.
+ */
+ if (package_index != ACPI_NOT_PACKAGE_ELEMENT) {
+ new_object->common.reference_count =
+ return_object->common.reference_count;
+
+ if (return_object->common.reference_count > 1) {
+ return_object->common.reference_count--;
+ }
+
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
+ data->node_flags,
+ "Converted Buffer to expected String at index %u",
+ package_index));
+ } else {
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
+ data->node_flags,
+ "Converted Buffer to expected String"));
+ }
+
+ /* Delete old object, install the new return object */
+
+ acpi_ut_remove_reference(return_object);
+ *return_object_ptr = new_object;
+ data->flags |= ACPI_OBJECT_REPAIRED;
+ return (AE_OK);
+
+ default:
+ break;
+ }
+
+ return (AE_AML_OPERAND_TYPE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_repair_package_list
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * obj_desc_ptr - Pointer to the object to repair. The new
+ * package object is returned here,
+ * overwriting the old object.
+ *
+ * RETURN: Status, new object in *obj_desc_ptr
+ *
+ * DESCRIPTION: Repair a common problem with objects that are defined to return
+ * a variable-length Package of Packages. If the variable-length
+ * is one, some BIOS code mistakenly simply declares a single
+ * Package instead of a Package with one sub-Package. This
+ * function attempts to repair this error by wrapping a Package
+ * object around the original Package, creating the correct
+ * Package with one sub-Package.
+ *
+ * Names that can be repaired in this manner include:
+ * _ALR, _CSD, _HPX, _MLS, _PRT, _PSS, _TRT, TSS
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ns_repair_package_list(struct acpi_predefined_data *data,
+ union acpi_operand_object **obj_desc_ptr)
+{
+ union acpi_operand_object *pkg_obj_desc;
+
+ /*
+ * Create the new outer package and populate it. The new package will
+ * have a single element, the lone subpackage.
+ */
+ pkg_obj_desc = acpi_ut_create_package_object(1);
+ if (!pkg_obj_desc) {
+ return (AE_NO_MEMORY);
+ }
+
+ pkg_obj_desc->package.elements[0] = *obj_desc_ptr;
+
+ /* Return the new object in the object pointer */
+
+ *obj_desc_ptr = pkg_obj_desc;
+ data->flags |= ACPI_OBJECT_REPAIRED;
+
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Incorrectly formed Package, attempting repair"));
+
+ return (AE_OK);
+}
/* There is a non-ascii character in the name */
- ACPI_MOVE_32_TO_32(&bad_name, internal_name);
+ ACPI_MOVE_32_TO_32(&bad_name,
+ ACPI_CAST_PTR(u32, internal_name));
acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name);
} else {
/* Convert path to external format */
acpi_status status;
char *internal_path;
- ACPI_FUNCTION_TRACE_PTR(ns_get_node, pathname);
+ ACPI_FUNCTION_TRACE_PTR(ns_get_node, ACPI_CAST_PTR(char, pathname));
if (!pathname) {
*return_node = prefix_node;
acpi_status status;
struct acpi_namespace_node *node;
u32 flags;
- struct acpica_device_id hid;
- struct acpi_compatible_id_list *cid;
+ struct acpica_device_id *hid;
+ struct acpica_device_id_list *cid;
u32 i;
- int found;
+ u8 found;
+ int no_match;
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return (AE_CTRL_DEPTH);
}
- if (ACPI_STRNCMP(hid.value, info->hid, sizeof(hid.value)) != 0) {
-
- /* Get the list of Compatible IDs */
+ no_match = ACPI_STRCMP(hid->string, info->hid);
+ ACPI_FREE(hid);
+ if (no_match) {
+ /*
+ * HID does not match, attempt match within the
+ * list of Compatible IDs (CIDs)
+ */
status = acpi_ut_execute_CID(node, &cid);
if (status == AE_NOT_FOUND) {
return (AE_OK);
found = 0;
for (i = 0; i < cid->count; i++) {
- if (ACPI_STRNCMP(cid->id[i].value, info->hid,
- sizeof(struct
- acpi_compatible_id)) ==
- 0) {
+ if (ACPI_STRCMP(cid->ids[i].string, info->hid)
+ == 0) {
found = 1;
break;
}
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsxfname")
+/* Local prototypes */
+static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
+ struct acpica_device_id *source,
+ char *string_area);
+
/******************************************************************************
*
* FUNCTION: acpi_get_handle
* namespace handle.
*
******************************************************************************/
+
acpi_status
acpi_get_handle(acpi_handle parent,
acpi_string pathname, acpi_handle * ret_handle)
/******************************************************************************
*
+ * FUNCTION: acpi_ns_copy_device_id
+ *
+ * PARAMETERS: Dest - Pointer to the destination DEVICE_ID
+ * Source - Pointer to the source DEVICE_ID
+ * string_area - Pointer to where to copy the dest string
+ *
+ * RETURN: Pointer to the next string area
+ *
+ * DESCRIPTION: Copy a single DEVICE_ID, including the string data.
+ *
+ ******************************************************************************/
+static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
+ struct acpica_device_id *source,
+ char *string_area)
+{
+ /* Create the destination DEVICE_ID */
+
+ dest->string = string_area;
+ dest->length = source->length;
+
+ /* Copy actual string and return a pointer to the next string area */
+
+ ACPI_MEMCPY(string_area, source->string, source->length);
+ return (string_area + source->length);
+}
+
+/******************************************************************************
+ *
* FUNCTION: acpi_get_object_info
*
- * PARAMETERS: Handle - Object Handle
- * Buffer - Where the info is returned
+ * PARAMETERS: Handle - Object Handle
+ * return_buffer - Where the info is returned
*
* RETURN: Status
*
* namespace node and possibly by running several standard
* control methods (Such as in the case of a device.)
*
+ * For Device and Processor objects, run the Device _HID, _UID, _CID, _STA,
+ * _ADR, _sx_w, and _sx_d methods.
+ *
+ * Note: Allocates the return buffer, must be freed by the caller.
+ *
******************************************************************************/
+
acpi_status
-acpi_get_object_info(acpi_handle handle, struct acpi_buffer * buffer)
+acpi_get_object_info(acpi_handle handle,
+ struct acpi_device_info **return_buffer)
{
- acpi_status status;
struct acpi_namespace_node *node;
struct acpi_device_info *info;
- struct acpi_device_info *return_info;
- struct acpi_compatible_id_list *cid_list = NULL;
- acpi_size size;
+ struct acpica_device_id_list *cid_list = NULL;
+ struct acpica_device_id *hid = NULL;
+ struct acpica_device_id *uid = NULL;
+ char *next_id_string;
+ acpi_object_type type;
+ acpi_name name;
+ u8 param_count = 0;
+ u8 valid = 0;
+ u32 info_size;
+ u32 i;
+ acpi_status status;
/* Parameter validation */
- if (!handle || !buffer) {
+ if (!handle || !return_buffer) {
return (AE_BAD_PARAMETER);
}
- status = acpi_ut_validate_buffer(buffer);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_device_info));
- if (!info) {
- return (AE_NO_MEMORY);
- }
-
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
goto cleanup;
node = acpi_ns_map_handle_to_node(handle);
if (!node) {
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- status = AE_BAD_PARAMETER;
- goto cleanup;
+ return (AE_BAD_PARAMETER);
}
- /* Init return structure */
-
- size = sizeof(struct acpi_device_info);
+ /* Get the namespace node data while the namespace is locked */
- info->type = node->type;
- info->name = node->name.integer;
- info->valid = 0;
+ info_size = sizeof(struct acpi_device_info);
+ type = node->type;
+ name = node->name.integer;
if (node->type == ACPI_TYPE_METHOD) {
- info->param_count = node->object->method.param_count;
+ param_count = node->object->method.param_count;
}
status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- goto cleanup;
+ return (status);
}
- /* If not a device, we are all done */
-
- if (info->type == ACPI_TYPE_DEVICE) {
+ if ((type == ACPI_TYPE_DEVICE) || (type == ACPI_TYPE_PROCESSOR)) {
/*
- * Get extra info for ACPI Devices objects only:
- * Run the Device _HID, _UID, _CID, _STA, _ADR and _sx_d methods.
+ * Get extra info for ACPI Device/Processor objects only:
+ * Run the Device _HID, _UID, and _CID methods.
*
* Note: none of these methods are required, so they may or may
- * not be present for this device. The Info->Valid bitfield is used
- * to indicate which methods were found and ran successfully.
+ * not be present for this device. The Info->Valid bitfield is used
+ * to indicate which methods were found and run successfully.
*/
/* Execute the Device._HID method */
- status = acpi_ut_execute_HID(node, &info->hardware_id);
+ status = acpi_ut_execute_HID(node, &hid);
if (ACPI_SUCCESS(status)) {
- info->valid |= ACPI_VALID_HID;
+ info_size += hid->length;
+ valid |= ACPI_VALID_HID;
}
/* Execute the Device._UID method */
- status = acpi_ut_execute_UID(node, &info->unique_id);
+ status = acpi_ut_execute_UID(node, &uid);
if (ACPI_SUCCESS(status)) {
- info->valid |= ACPI_VALID_UID;
+ info_size += uid->length;
+ valid |= ACPI_VALID_UID;
}
/* Execute the Device._CID method */
status = acpi_ut_execute_CID(node, &cid_list);
if (ACPI_SUCCESS(status)) {
- size += cid_list->size;
- info->valid |= ACPI_VALID_CID;
+
+ /* Add size of CID strings and CID pointer array */
+
+ info_size +=
+ (cid_list->list_size -
+ sizeof(struct acpica_device_id_list));
+ valid |= ACPI_VALID_CID;
}
+ }
+
+ /*
+ * Now that we have the variable-length data, we can allocate the
+ * return buffer
+ */
+ info = ACPI_ALLOCATE_ZEROED(info_size);
+ if (!info) {
+ status = AE_NO_MEMORY;
+ goto cleanup;
+ }
+
+ /* Get the fixed-length data */
+
+ if ((type == ACPI_TYPE_DEVICE) || (type == ACPI_TYPE_PROCESSOR)) {
+ /*
+ * Get extra info for ACPI Device/Processor objects only:
+ * Run the _STA, _ADR and, sx_w, and _sx_d methods.
+ *
+ * Note: none of these methods are required, so they may or may
+ * not be present for this device. The Info->Valid bitfield is used
+ * to indicate which methods were found and run successfully.
+ */
/* Execute the Device._STA method */
status = acpi_ut_execute_STA(node, &info->current_status);
if (ACPI_SUCCESS(status)) {
- info->valid |= ACPI_VALID_STA;
+ valid |= ACPI_VALID_STA;
}
/* Execute the Device._ADR method */
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, node,
&info->address);
if (ACPI_SUCCESS(status)) {
- info->valid |= ACPI_VALID_ADR;
+ valid |= ACPI_VALID_ADR;
+ }
+
+ /* Execute the Device._sx_w methods */
+
+ status = acpi_ut_execute_power_methods(node,
+ acpi_gbl_lowest_dstate_names,
+ ACPI_NUM_sx_w_METHODS,
+ info->lowest_dstates);
+ if (ACPI_SUCCESS(status)) {
+ valid |= ACPI_VALID_SXWS;
}
/* Execute the Device._sx_d methods */
- status = acpi_ut_execute_sxds(node, info->highest_dstates);
+ status = acpi_ut_execute_power_methods(node,
+ acpi_gbl_highest_dstate_names,
+ ACPI_NUM_sx_d_METHODS,
+ info->highest_dstates);
if (ACPI_SUCCESS(status)) {
- info->valid |= ACPI_VALID_SXDS;
+ valid |= ACPI_VALID_SXDS;
}
}
- /* Validate/Allocate/Clear caller buffer */
+ /*
+ * Create a pointer to the string area of the return buffer.
+ * Point to the end of the base struct acpi_device_info structure.
+ */
+ next_id_string = ACPI_CAST_PTR(char, info->compatible_id_list.ids);
+ if (cid_list) {
- status = acpi_ut_initialize_buffer(buffer, size);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
+ /* Point past the CID DEVICE_ID array */
+
+ next_id_string +=
+ ((acpi_size) cid_list->count *
+ sizeof(struct acpica_device_id));
}
- /* Populate the return buffer */
+ /*
+ * Copy the HID, UID, and CIDs to the return buffer. The variable-length
+ * strings are copied to the reserved area at the end of the buffer.
+ *
+ * For HID and CID, check if the ID is a PCI Root Bridge.
+ */
+ if (hid) {
+ next_id_string = acpi_ns_copy_device_id(&info->hardware_id,
+ hid, next_id_string);
+
+ if (acpi_ut_is_pci_root_bridge(hid->string)) {
+ info->flags |= ACPI_PCI_ROOT_BRIDGE;
+ }
+ }
- return_info = buffer->pointer;
- ACPI_MEMCPY(return_info, info, sizeof(struct acpi_device_info));
+ if (uid) {
+ next_id_string = acpi_ns_copy_device_id(&info->unique_id,
+ uid, next_id_string);
+ }
if (cid_list) {
- ACPI_MEMCPY(&return_info->compatibility_id, cid_list,
- cid_list->size);
+ info->compatible_id_list.count = cid_list->count;
+ info->compatible_id_list.list_size = cid_list->list_size;
+
+ /* Copy each CID */
+
+ for (i = 0; i < cid_list->count; i++) {
+ next_id_string =
+ acpi_ns_copy_device_id(&info->compatible_id_list.
+ ids[i], &cid_list->ids[i],
+ next_id_string);
+
+ if (acpi_ut_is_pci_root_bridge(cid_list->ids[i].string)) {
+ info->flags |= ACPI_PCI_ROOT_BRIDGE;
+ }
+ }
}
+ /* Copy the fixed-length data */
+
+ info->info_size = info_size;
+ info->type = type;
+ info->name = name;
+ info->param_count = param_count;
+ info->valid = valid;
+
+ *return_buffer = info;
+ status = AE_OK;
+
cleanup:
- ACPI_FREE(info);
+ if (hid) {
+ ACPI_FREE(hid);
+ }
+ if (uid) {
+ ACPI_FREE(uid);
+ }
if (cid_list) {
ACPI_FREE(cid_list);
}
acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
union acpi_parse_object *op, acpi_status status);
+static void
+acpi_ps_link_module_code(u8 *aml_start, u32 aml_length, acpi_owner_id owner_id);
+
/*******************************************************************************
*
* FUNCTION: acpi_ps_get_aml_opcode
{
acpi_status status = AE_OK;
union acpi_parse_object *arg = NULL;
+ const struct acpi_opcode_info *op_info;
ACPI_FUNCTION_TRACE_PTR(ps_get_arguments, walk_state);
INCREMENT_ARG_LIST(walk_state->arg_types);
}
- /* Special processing for certain opcodes */
-
- /* TBD (remove): Temporary mechanism to disable this code if needed */
-
-#ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
-
- if ((walk_state->pass_number <= ACPI_IMODE_LOAD_PASS1) &&
+ /*
+ * Handle executable code at "module-level". This refers to
+ * executable opcodes that appear outside of any control method.
+ */
+ if ((walk_state->pass_number <= ACPI_IMODE_LOAD_PASS2) &&
((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) == 0)) {
/*
* We want to skip If/Else/While constructs during Pass1 because we
case AML_ELSE_OP:
case AML_WHILE_OP:
+ /*
+ * Currently supported module-level opcodes are:
+ * IF/ELSE/WHILE. These appear to be the most common,
+ * and easiest to support since they open an AML
+ * package.
+ */
+ if (walk_state->pass_number ==
+ ACPI_IMODE_LOAD_PASS1) {
+ acpi_ps_link_module_code(aml_op_start,
+ walk_state->
+ parser_state.
+ pkg_end -
+ aml_op_start,
+ walk_state->
+ owner_id);
+ }
+
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Pass1: Skipping an If/Else/While body\n"));
break;
default:
+ /*
+ * Check for an unsupported executable opcode at module
+ * level. We must be in PASS1, the parent must be a SCOPE,
+ * The opcode class must be EXECUTE, and the opcode must
+ * not be an argument to another opcode.
+ */
+ if ((walk_state->pass_number ==
+ ACPI_IMODE_LOAD_PASS1)
+ && (op->common.parent->common.aml_opcode ==
+ AML_SCOPE_OP)) {
+ op_info =
+ acpi_ps_get_opcode_info(op->common.
+ aml_opcode);
+ if ((op_info->class ==
+ AML_CLASS_EXECUTE) && (!arg)) {
+ ACPI_WARNING((AE_INFO,
+ "Detected an unsupported executable opcode "
+ "at module-level: [0x%.4X] at table offset 0x%.4X",
+ op->common.aml_opcode,
+ (u32)((aml_op_start - walk_state->parser_state.aml_start)
+ + sizeof(struct acpi_table_header))));
+ }
+ }
break;
}
}
-#endif
+
+ /* Special processing for certain opcodes */
switch (op->common.aml_opcode) {
case AML_METHOD_OP:
/*******************************************************************************
*
+ * FUNCTION: acpi_ps_link_module_code
+ *
+ * PARAMETERS: aml_start - Pointer to the AML
+ * aml_length - Length of executable AML
+ * owner_id - owner_id of module level code
+ *
+ * RETURN: None.
+ *
+ * DESCRIPTION: Wrap the module-level code with a method object and link the
+ * object to the global list. Note, the mutex field of the method
+ * object is used to link multiple module-level code objects.
+ *
+ ******************************************************************************/
+
+static void
+acpi_ps_link_module_code(u8 *aml_start, u32 aml_length, acpi_owner_id owner_id)
+{
+ union acpi_operand_object *prev;
+ union acpi_operand_object *next;
+ union acpi_operand_object *method_obj;
+
+ /* Get the tail of the list */
+
+ prev = next = acpi_gbl_module_code_list;
+ while (next) {
+ prev = next;
+ next = next->method.mutex;
+ }
+
+ /*
+ * Insert the module level code into the list. Merge it if it is
+ * adjacent to the previous element.
+ */
+ if (!prev ||
+ ((prev->method.aml_start + prev->method.aml_length) != aml_start)) {
+
+ /* Create, initialize, and link a new temporary method object */
+
+ method_obj = acpi_ut_create_internal_object(ACPI_TYPE_METHOD);
+ if (!method_obj) {
+ return;
+ }
+
+ method_obj->method.aml_start = aml_start;
+ method_obj->method.aml_length = aml_length;
+ method_obj->method.owner_id = owner_id;
+ method_obj->method.flags |= AOPOBJ_MODULE_LEVEL;
+
+ if (!prev) {
+ acpi_gbl_module_code_list = method_obj;
+ } else {
+ prev->method.mutex = method_obj;
+ }
+ } else {
+ prev->method.aml_length += aml_length;
+ }
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_ps_complete_op
*
* PARAMETERS: walk_state - Current state
goto cleanup;
}
+ if (info->obj_desc->method.flags & AOPOBJ_MODULE_LEVEL) {
+ walk_state->parse_flags |= ACPI_PARSE_MODULE_LEVEL;
+ }
+
/* Invoke an internal method if necessary */
if (info->obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY) {
ACPI_MODULE_NAME("tbutils")
/* Local prototypes */
+static void acpi_tb_fix_string(char *string, acpi_size length);
+
+static void
+acpi_tb_cleanup_table_header(struct acpi_table_header *out_header,
+ struct acpi_table_header *header);
+
static acpi_physical_address
acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size);
/*******************************************************************************
*
+ * FUNCTION: acpi_tb_fix_string
+ *
+ * PARAMETERS: String - String to be repaired
+ * Length - Maximum length
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Replace every non-printable or non-ascii byte in the string
+ * with a question mark '?'.
+ *
+ ******************************************************************************/
+
+static void acpi_tb_fix_string(char *string, acpi_size length)
+{
+
+ while (length && *string) {
+ if (!ACPI_IS_PRINT(*string)) {
+ *string = '?';
+ }
+ string++;
+ length--;
+ }
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_cleanup_table_header
+ *
+ * PARAMETERS: out_header - Where the cleaned header is returned
+ * Header - Input ACPI table header
+ *
+ * RETURN: Returns the cleaned header in out_header
+ *
+ * DESCRIPTION: Copy the table header and ensure that all "string" fields in
+ * the header consist of printable characters.
+ *
+ ******************************************************************************/
+
+static void
+acpi_tb_cleanup_table_header(struct acpi_table_header *out_header,
+ struct acpi_table_header *header)
+{
+
+ ACPI_MEMCPY(out_header, header, sizeof(struct acpi_table_header));
+
+ acpi_tb_fix_string(out_header->signature, ACPI_NAME_SIZE);
+ acpi_tb_fix_string(out_header->oem_id, ACPI_OEM_ID_SIZE);
+ acpi_tb_fix_string(out_header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
+ acpi_tb_fix_string(out_header->asl_compiler_id, ACPI_NAME_SIZE);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_tb_print_table_header
*
* PARAMETERS: Address - Table physical address
acpi_tb_print_table_header(acpi_physical_address address,
struct acpi_table_header *header)
{
+ struct acpi_table_header local_header;
/*
* The reason that the Address is cast to a void pointer is so that we
/* RSDP has no common fields */
+ ACPI_MEMCPY(local_header.oem_id,
+ ACPI_CAST_PTR(struct acpi_table_rsdp,
+ header)->oem_id, ACPI_OEM_ID_SIZE);
+ acpi_tb_fix_string(local_header.oem_id, ACPI_OEM_ID_SIZE);
+
ACPI_INFO((AE_INFO, "RSDP %p %05X (v%.2d %6.6s)",
ACPI_CAST_PTR (void, address),
(ACPI_CAST_PTR(struct acpi_table_rsdp, header)->
header)->length : 20,
ACPI_CAST_PTR(struct acpi_table_rsdp,
header)->revision,
- ACPI_CAST_PTR(struct acpi_table_rsdp,
- header)->oem_id));
+ local_header.oem_id));
} else {
/* Standard ACPI table with full common header */
+ acpi_tb_cleanup_table_header(&local_header, header);
+
ACPI_INFO((AE_INFO,
"%4.4s %p %05X (v%.2d %6.6s %8.8s %08X %4.4s %08X)",
- header->signature, ACPI_CAST_PTR (void, address),
- header->length, header->revision, header->oem_id,
- header->oem_table_id, header->oem_revision,
- header->asl_compiler_id,
- header->asl_compiler_revision));
+ local_header.signature, ACPI_CAST_PTR(void, address),
+ local_header.length, local_header.revision,
+ local_header.oem_id, local_header.oem_table_id,
+ local_header.oem_revision,
+ local_header.asl_compiler_id,
+ local_header.asl_compiler_revision));
+
}
}
ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
"***** Region %p\n", object));
+ /* Invalidate the region address/length via the host OS */
+
+ acpi_os_invalidate_address(object->region.space_id,
+ object->region.address,
+ (acpi_size) object->region.length);
+
second_desc = acpi_ns_get_secondary_object(object);
if (second_desc) {
/*
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
-#include "acinterp.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("uteval")
-/* Local prototypes */
-static void
-acpi_ut_copy_id_string(char *destination, char *source, acpi_size max_length);
-
-static acpi_status
-acpi_ut_translate_one_cid(union acpi_operand_object *obj_desc,
- struct acpi_compatible_id *one_cid);
-
/*
* Strings supported by the _OSI predefined (internal) method.
*
{"Windows 2001 SP2", ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */
{"Windows 2001.1 SP1", ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */
{"Windows 2006", ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */
+ {"Windows 2006.1", ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */
+ {"Windows 2006 SP1", ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */
+ {"Windows 2009", ACPI_OSI_WIN_7}, /* Windows 7 and Server 2008 R2 - Added 09/2009 */
/* Feature Group Strings */
* RETURN: Status
*
* DESCRIPTION: Evaluates a namespace object and verifies the type of the
- * return object. Common code that simplifies accessing objects
+ * return object. Common code that simplifies accessing objects
* that have required return objects of fixed types.
*
* NOTE: Internal function, no parameter validation
if ((acpi_gbl_enable_interpreter_slack) && (!expected_return_btypes)) {
/*
- * We received a return object, but one was not expected. This can
+ * We received a return object, but one was not expected. This can
* happen frequently if the "implicit return" feature is enabled.
* Just delete the return object and return AE_OK.
*/
*
* PARAMETERS: object_name - Object name to be evaluated
* device_node - Node for the device
- * Address - Where the value is returned
+ * Value - Where the value is returned
*
* RETURN: Status
*
* DESCRIPTION: Evaluates a numeric namespace object for a selected device
- * and stores result in *Address.
+ * and stores result in *Value.
*
* NOTE: Internal function, no parameter validation
*
acpi_status
acpi_ut_evaluate_numeric_object(char *object_name,
struct acpi_namespace_node *device_node,
- acpi_integer * address)
+ acpi_integer *value)
{
union acpi_operand_object *obj_desc;
acpi_status status;
/* Get the returned Integer */
- *address = obj_desc->integer.value;
-
- /* On exit, we must delete the return object */
-
- acpi_ut_remove_reference(obj_desc);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_copy_id_string
- *
- * PARAMETERS: Destination - Where to copy the string
- * Source - Source string
- * max_length - Length of the destination buffer
- *
- * RETURN: None
- *
- * DESCRIPTION: Copies an ID string for the _HID, _CID, and _UID methods.
- * Performs removal of a leading asterisk if present -- workaround
- * for a known issue on a bunch of machines.
- *
- ******************************************************************************/
-
-static void
-acpi_ut_copy_id_string(char *destination, char *source, acpi_size max_length)
-{
-
- /*
- * Workaround for ID strings that have a leading asterisk. This construct
- * is not allowed by the ACPI specification (ID strings must be
- * alphanumeric), but enough existing machines have this embedded in their
- * ID strings that the following code is useful.
- */
- if (*source == '*') {
- source++;
- }
-
- /* Do the actual copy */
-
- ACPI_STRNCPY(destination, source, max_length);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_execute_HID
- *
- * PARAMETERS: device_node - Node for the device
- * Hid - Where the HID is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Executes the _HID control method that returns the hardware
- * ID of the device.
- *
- * NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
- struct acpica_device_id *hid)
-{
- union acpi_operand_object *obj_desc;
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ut_execute_HID);
-
- status = acpi_ut_evaluate_object(device_node, METHOD_NAME__HID,
- ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
- &obj_desc);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
-
- /* Convert the Numeric HID to string */
-
- acpi_ex_eisa_id_to_string((u32) obj_desc->integer.value,
- hid->value);
- } else {
- /* Copy the String HID from the returned object */
-
- acpi_ut_copy_id_string(hid->value, obj_desc->string.pointer,
- sizeof(hid->value));
- }
-
- /* On exit, we must delete the return object */
-
- acpi_ut_remove_reference(obj_desc);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_translate_one_cid
- *
- * PARAMETERS: obj_desc - _CID object, must be integer or string
- * one_cid - Where the CID string is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Return a numeric or string _CID value as a string.
- * (Compatible ID)
- *
- * NOTE: Assumes a maximum _CID string length of
- * ACPI_MAX_CID_LENGTH.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_translate_one_cid(union acpi_operand_object *obj_desc,
- struct acpi_compatible_id *one_cid)
-{
-
- switch (obj_desc->common.type) {
- case ACPI_TYPE_INTEGER:
-
- /* Convert the Numeric CID to string */
-
- acpi_ex_eisa_id_to_string((u32) obj_desc->integer.value,
- one_cid->value);
- return (AE_OK);
-
- case ACPI_TYPE_STRING:
-
- if (obj_desc->string.length > ACPI_MAX_CID_LENGTH) {
- return (AE_AML_STRING_LIMIT);
- }
-
- /* Copy the String CID from the returned object */
-
- acpi_ut_copy_id_string(one_cid->value, obj_desc->string.pointer,
- ACPI_MAX_CID_LENGTH);
- return (AE_OK);
-
- default:
-
- return (AE_TYPE);
- }
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_execute_CID
- *
- * PARAMETERS: device_node - Node for the device
- * return_cid_list - Where the CID list is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Executes the _CID control method that returns one or more
- * compatible hardware IDs for the device.
- *
- * NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_execute_CID(struct acpi_namespace_node * device_node,
- struct acpi_compatible_id_list ** return_cid_list)
-{
- union acpi_operand_object *obj_desc;
- acpi_status status;
- u32 count;
- u32 size;
- struct acpi_compatible_id_list *cid_list;
- u32 i;
-
- ACPI_FUNCTION_TRACE(ut_execute_CID);
-
- /* Evaluate the _CID method for this device */
-
- status = acpi_ut_evaluate_object(device_node, METHOD_NAME__CID,
- ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING
- | ACPI_BTYPE_PACKAGE, &obj_desc);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Get the number of _CIDs returned */
-
- count = 1;
- if (obj_desc->common.type == ACPI_TYPE_PACKAGE) {
- count = obj_desc->package.count;
- }
-
- /* Allocate a worst-case buffer for the _CIDs */
-
- size = (((count - 1) * sizeof(struct acpi_compatible_id)) +
- sizeof(struct acpi_compatible_id_list));
-
- cid_list = ACPI_ALLOCATE_ZEROED((acpi_size) size);
- if (!cid_list) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- /* Init CID list */
-
- cid_list->count = count;
- cid_list->size = size;
-
- /*
- * A _CID can return either a single compatible ID or a package of
- * compatible IDs. Each compatible ID can be one of the following:
- * 1) Integer (32 bit compressed EISA ID) or
- * 2) String (PCI ID format, e.g. "PCI\VEN_vvvv&DEV_dddd&SUBSYS_ssssssss")
- */
-
- /* The _CID object can be either a single CID or a package (list) of CIDs */
-
- if (obj_desc->common.type == ACPI_TYPE_PACKAGE) {
-
- /* Translate each package element */
-
- for (i = 0; i < count; i++) {
- status =
- acpi_ut_translate_one_cid(obj_desc->package.
- elements[i],
- &cid_list->id[i]);
- if (ACPI_FAILURE(status)) {
- break;
- }
- }
- } else {
- /* Only one CID, translate to a string */
-
- status = acpi_ut_translate_one_cid(obj_desc, cid_list->id);
- }
-
- /* Cleanup on error */
-
- if (ACPI_FAILURE(status)) {
- ACPI_FREE(cid_list);
- } else {
- *return_cid_list = cid_list;
- }
-
- /* On exit, we must delete the _CID return object */
-
- acpi_ut_remove_reference(obj_desc);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_execute_UID
- *
- * PARAMETERS: device_node - Node for the device
- * Uid - Where the UID is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Executes the _UID control method that returns the hardware
- * ID of the device.
- *
- * NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
- struct acpica_device_id *uid)
-{
- union acpi_operand_object *obj_desc;
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ut_execute_UID);
-
- status = acpi_ut_evaluate_object(device_node, METHOD_NAME__UID,
- ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
- &obj_desc);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
-
- /* Convert the Numeric UID to string */
-
- acpi_ex_unsigned_integer_to_string(obj_desc->integer.value,
- uid->value);
- } else {
- /* Copy the String UID from the returned object */
-
- acpi_ut_copy_id_string(uid->value, obj_desc->string.pointer,
- sizeof(uid->value));
- }
+ *value = obj_desc->integer.value;
/* On exit, we must delete the return object */
/*******************************************************************************
*
- * FUNCTION: acpi_ut_execute_Sxds
+ * FUNCTION: acpi_ut_execute_power_methods
*
* PARAMETERS: device_node - Node for the device
- * Flags - Where the status flags are returned
+ * method_names - Array of power method names
+ * method_count - Number of methods to execute
+ * out_values - Where the power method values are returned
*
- * RETURN: Status
+ * RETURN: Status, out_values
*
- * DESCRIPTION: Executes _STA for selected device and stores results in
- * *Flags.
+ * DESCRIPTION: Executes the specified power methods for the device and returns
+ * the result(s).
*
* NOTE: Internal function, no parameter validation
*
- ******************************************************************************/
+******************************************************************************/
acpi_status
-acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest)
+acpi_ut_execute_power_methods(struct acpi_namespace_node *device_node,
+ const char **method_names,
+ u8 method_count, u8 *out_values)
{
union acpi_operand_object *obj_desc;
acpi_status status;
+ acpi_status final_status = AE_NOT_FOUND;
u32 i;
- ACPI_FUNCTION_TRACE(ut_execute_sxds);
+ ACPI_FUNCTION_TRACE(ut_execute_power_methods);
- for (i = 0; i < 4; i++) {
- highest[i] = 0xFF;
+ for (i = 0; i < method_count; i++) {
+ /*
+ * Execute the power method (_sx_d or _sx_w). The only allowable
+ * return type is an Integer.
+ */
status = acpi_ut_evaluate_object(device_node,
ACPI_CAST_PTR(char,
- acpi_gbl_highest_dstate_names
- [i]),
+ method_names[i]),
ACPI_BTYPE_INTEGER, &obj_desc);
- if (ACPI_FAILURE(status)) {
- if (status != AE_NOT_FOUND) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "%s on Device %4.4s, %s\n",
- ACPI_CAST_PTR(char,
- acpi_gbl_highest_dstate_names
- [i]),
- acpi_ut_get_node_name
- (device_node),
- acpi_format_exception
- (status)));
-
- return_ACPI_STATUS(status);
- }
- } else {
- /* Extract the Dstate value */
-
- highest[i] = (u8) obj_desc->integer.value;
+ if (ACPI_SUCCESS(status)) {
+ out_values[i] = (u8)obj_desc->integer.value;
/* Delete the return object */
acpi_ut_remove_reference(obj_desc);
+ final_status = AE_OK; /* At least one value is valid */
+ continue;
}
+
+ out_values[i] = ACPI_UINT8_MAX;
+ if (status == AE_NOT_FOUND) {
+ continue; /* Ignore if not found */
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "Failed %s on Device %4.4s, %s\n",
+ ACPI_CAST_PTR(char, method_names[i]),
+ acpi_ut_get_node_name(device_node),
+ acpi_format_exception(status)));
}
- return_ACPI_STATUS(AE_OK);
+ return_ACPI_STATUS(final_status);
}
"\\_S5_"
};
-const char *acpi_gbl_highest_dstate_names[4] = {
+const char *acpi_gbl_lowest_dstate_names[ACPI_NUM_sx_w_METHODS] = {
+ "_S0W",
+ "_S1W",
+ "_S2W",
+ "_S3W",
+ "_S4W"
+};
+
+const char *acpi_gbl_highest_dstate_names[ACPI_NUM_sx_d_METHODS] = {
"_S1D",
"_S2D",
"_S3D",
"SMBus",
"SystemCMOS",
"PCIBARTarget",
+ "IPMI",
"DataTable"
};
/* Namespace */
+ acpi_gbl_module_code_list = NULL;
acpi_gbl_root_node = NULL;
acpi_gbl_root_node_struct.name.integer = ACPI_ROOT_NAME;
acpi_gbl_root_node_struct.descriptor_type = ACPI_DESC_TYPE_NAMED;
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: utids - support for device IDs - HID, UID, CID
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2009, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acinterp.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utids")
+
+/* Local prototypes */
+static void acpi_ut_copy_id_string(char *destination, char *source);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_copy_id_string
+ *
+ * PARAMETERS: Destination - Where to copy the string
+ * Source - Source string
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Copies an ID string for the _HID, _CID, and _UID methods.
+ * Performs removal of a leading asterisk if present -- workaround
+ * for a known issue on a bunch of machines.
+ *
+ ******************************************************************************/
+
+static void acpi_ut_copy_id_string(char *destination, char *source)
+{
+
+ /*
+ * Workaround for ID strings that have a leading asterisk. This construct
+ * is not allowed by the ACPI specification (ID strings must be
+ * alphanumeric), but enough existing machines have this embedded in their
+ * ID strings that the following code is useful.
+ */
+ if (*source == '*') {
+ source++;
+ }
+
+ /* Do the actual copy */
+
+ ACPI_STRCPY(destination, source);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_execute_HID
+ *
+ * PARAMETERS: device_node - Node for the device
+ * return_id - Where the string HID is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Executes the _HID control method that returns the hardware
+ * ID of the device. The HID is either an 32-bit encoded EISAID
+ * Integer or a String. A string is always returned. An EISAID
+ * is converted to a string.
+ *
+ * NOTE: Internal function, no parameter validation
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
+ struct acpica_device_id **return_id)
+{
+ union acpi_operand_object *obj_desc;
+ struct acpica_device_id *hid;
+ u32 length;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ut_execute_HID);
+
+ status = acpi_ut_evaluate_object(device_node, METHOD_NAME__HID,
+ ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
+ &obj_desc);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Get the size of the String to be returned, includes null terminator */
+
+ if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
+ length = ACPI_EISAID_STRING_SIZE;
+ } else {
+ length = obj_desc->string.length + 1;
+ }
+
+ /* Allocate a buffer for the HID */
+
+ hid =
+ ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+ (acpi_size) length);
+ if (!hid) {
+ status = AE_NO_MEMORY;
+ goto cleanup;
+ }
+
+ /* Area for the string starts after DEVICE_ID struct */
+
+ hid->string = ACPI_ADD_PTR(char, hid, sizeof(struct acpica_device_id));
+
+ /* Convert EISAID to a string or simply copy existing string */
+
+ if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
+ acpi_ex_eisa_id_to_string(hid->string, obj_desc->integer.value);
+ } else {
+ acpi_ut_copy_id_string(hid->string, obj_desc->string.pointer);
+ }
+
+ hid->length = length;
+ *return_id = hid;
+
+cleanup:
+
+ /* On exit, we must delete the return object */
+
+ acpi_ut_remove_reference(obj_desc);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_execute_UID
+ *
+ * PARAMETERS: device_node - Node for the device
+ * return_id - Where the string UID is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Executes the _UID control method that returns the unique
+ * ID of the device. The UID is either a 64-bit Integer (NOT an
+ * EISAID) or a string. Always returns a string. A 64-bit integer
+ * is converted to a decimal string.
+ *
+ * NOTE: Internal function, no parameter validation
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
+ struct acpica_device_id **return_id)
+{
+ union acpi_operand_object *obj_desc;
+ struct acpica_device_id *uid;
+ u32 length;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ut_execute_UID);
+
+ status = acpi_ut_evaluate_object(device_node, METHOD_NAME__UID,
+ ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
+ &obj_desc);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Get the size of the String to be returned, includes null terminator */
+
+ if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
+ length = ACPI_MAX64_DECIMAL_DIGITS + 1;
+ } else {
+ length = obj_desc->string.length + 1;
+ }
+
+ /* Allocate a buffer for the UID */
+
+ uid =
+ ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+ (acpi_size) length);
+ if (!uid) {
+ status = AE_NO_MEMORY;
+ goto cleanup;
+ }
+
+ /* Area for the string starts after DEVICE_ID struct */
+
+ uid->string = ACPI_ADD_PTR(char, uid, sizeof(struct acpica_device_id));
+
+ /* Convert an Integer to string, or just copy an existing string */
+
+ if (obj_desc->common.type == ACPI_TYPE_INTEGER) {
+ acpi_ex_integer_to_string(uid->string, obj_desc->integer.value);
+ } else {
+ acpi_ut_copy_id_string(uid->string, obj_desc->string.pointer);
+ }
+
+ uid->length = length;
+ *return_id = uid;
+
+cleanup:
+
+ /* On exit, we must delete the return object */
+
+ acpi_ut_remove_reference(obj_desc);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_execute_CID
+ *
+ * PARAMETERS: device_node - Node for the device
+ * return_cid_list - Where the CID list is returned
+ *
+ * RETURN: Status, list of CID strings
+ *
+ * DESCRIPTION: Executes the _CID control method that returns one or more
+ * compatible hardware IDs for the device.
+ *
+ * NOTE: Internal function, no parameter validation
+ *
+ * A _CID method can return either a single compatible ID or a package of
+ * compatible IDs. Each compatible ID can be one of the following:
+ * 1) Integer (32 bit compressed EISA ID) or
+ * 2) String (PCI ID format, e.g. "PCI\VEN_vvvv&DEV_dddd&SUBSYS_ssssssss")
+ *
+ * The Integer CIDs are converted to string format by this function.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
+ struct acpica_device_id_list **return_cid_list)
+{
+ union acpi_operand_object **cid_objects;
+ union acpi_operand_object *obj_desc;
+ struct acpica_device_id_list *cid_list;
+ char *next_id_string;
+ u32 string_area_size;
+ u32 length;
+ u32 cid_list_size;
+ acpi_status status;
+ u32 count;
+ u32 i;
+
+ ACPI_FUNCTION_TRACE(ut_execute_CID);
+
+ /* Evaluate the _CID method for this device */
+
+ status = acpi_ut_evaluate_object(device_node, METHOD_NAME__CID,
+ ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING
+ | ACPI_BTYPE_PACKAGE, &obj_desc);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /*
+ * Get the count and size of the returned _CIDs. _CID can return either
+ * a Package of Integers/Strings or a single Integer or String.
+ * Note: This section also validates that all CID elements are of the
+ * correct type (Integer or String).
+ */
+ if (obj_desc->common.type == ACPI_TYPE_PACKAGE) {
+ count = obj_desc->package.count;
+ cid_objects = obj_desc->package.elements;
+ } else { /* Single Integer or String CID */
+
+ count = 1;
+ cid_objects = &obj_desc;
+ }
+
+ string_area_size = 0;
+ for (i = 0; i < count; i++) {
+
+ /* String lengths include null terminator */
+
+ switch (cid_objects[i]->common.type) {
+ case ACPI_TYPE_INTEGER:
+ string_area_size += ACPI_EISAID_STRING_SIZE;
+ break;
+
+ case ACPI_TYPE_STRING:
+ string_area_size += cid_objects[i]->string.length + 1;
+ break;
+
+ default:
+ status = AE_TYPE;
+ goto cleanup;
+ }
+ }
+
+ /*
+ * Now that we know the length of the CIDs, allocate return buffer:
+ * 1) Size of the base structure +
+ * 2) Size of the CID DEVICE_ID array +
+ * 3) Size of the actual CID strings
+ */
+ cid_list_size = sizeof(struct acpica_device_id_list) +
+ ((count - 1) * sizeof(struct acpica_device_id)) + string_area_size;
+
+ cid_list = ACPI_ALLOCATE_ZEROED(cid_list_size);
+ if (!cid_list) {
+ status = AE_NO_MEMORY;
+ goto cleanup;
+ }
+
+ /* Area for CID strings starts after the CID DEVICE_ID array */
+
+ next_id_string = ACPI_CAST_PTR(char, cid_list->ids) +
+ ((acpi_size) count * sizeof(struct acpica_device_id));
+
+ /* Copy/convert the CIDs to the return buffer */
+
+ for (i = 0; i < count; i++) {
+ if (cid_objects[i]->common.type == ACPI_TYPE_INTEGER) {
+
+ /* Convert the Integer (EISAID) CID to a string */
+
+ acpi_ex_eisa_id_to_string(next_id_string,
+ cid_objects[i]->integer.
+ value);
+ length = ACPI_EISAID_STRING_SIZE;
+ } else { /* ACPI_TYPE_STRING */
+
+ /* Copy the String CID from the returned object */
+
+ acpi_ut_copy_id_string(next_id_string,
+ cid_objects[i]->string.pointer);
+ length = cid_objects[i]->string.length + 1;
+ }
+
+ cid_list->ids[i].string = next_id_string;
+ cid_list->ids[i].length = length;
+ next_id_string += length;
+ }
+
+ /* Finish the CID list */
+
+ cid_list->count = count;
+ cid_list->list_size = cid_list_size;
+ *return_cid_list = cid_list;
+
+cleanup:
+
+ /* On exit, we must delete the _CID return object */
+
+ acpi_ut_remove_reference(obj_desc);
+ return_ACPI_STATUS(status);
+}
*
* FUNCTION: acpi_ut_subsystem_shutdown
*
- * PARAMETERS: none
+ * PARAMETERS: None
*
- * RETURN: none
+ * RETURN: None
*
- * DESCRIPTION: Shutdown the various subsystems. Don't delete the mutex
- * objects here -- because the AML debugger may be still running.
+ * DESCRIPTION: Shutdown the various components. Do not delete the mutex
+ * objects here, because the AML debugger may be still running.
*
******************************************************************************/
void acpi_ut_subsystem_shutdown(void)
{
-
ACPI_FUNCTION_TRACE(ut_subsystem_shutdown);
- /* Just exit if subsystem is already shutdown */
-
- if (acpi_gbl_shutdown) {
- ACPI_ERROR((AE_INFO, "ACPI Subsystem is already terminated"));
- return_VOID;
- }
-
- /* Subsystem appears active, go ahead and shut it down */
-
- acpi_gbl_shutdown = TRUE;
- acpi_gbl_startup_flags = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem\n"));
-
#ifndef ACPI_ASL_COMPILER
/* Close the acpi_event Handling */
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utmisc")
+/*
+ * Common suffix for messages
+ */
+#define ACPI_COMMON_MSG_SUFFIX \
+ acpi_os_printf(" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number)
/*******************************************************************************
*
* FUNCTION: acpi_ut_validate_exception
/*******************************************************************************
*
+ * FUNCTION: acpi_ut_is_pci_root_bridge
+ *
+ * PARAMETERS: Id - The HID/CID in string format
+ *
+ * RETURN: TRUE if the Id is a match for a PCI/PCI-Express Root Bridge
+ *
+ * DESCRIPTION: Determine if the input ID is a PCI Root Bridge ID.
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_is_pci_root_bridge(char *id)
+{
+
+ /*
+ * Check if this is a PCI root bridge.
+ * ACPI 3.0+: check for a PCI Express root also.
+ */
+ if (!(ACPI_STRCMP(id,
+ PCI_ROOT_HID_STRING)) ||
+ !(ACPI_STRCMP(id, PCI_EXPRESS_ROOT_HID_STRING))) {
+ return (TRUE);
+ }
+
+ return (FALSE);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_ut_is_aml_table
*
* PARAMETERS: Table - An ACPI table
va_start(args, format);
acpi_os_vprintf(format, args);
- acpi_os_printf(" %8.8X %s-%u\n", ACPI_CA_VERSION, module_name,
- line_number);
+ ACPI_COMMON_MSG_SUFFIX;
va_end(args);
}
va_start(args, format);
acpi_os_vprintf(format, args);
- acpi_os_printf(" %8.8X %s-%u\n", ACPI_CA_VERSION, module_name,
- line_number);
+ ACPI_COMMON_MSG_SUFFIX;
va_end(args);
}
va_start(args, format);
acpi_os_vprintf(format, args);
- acpi_os_printf(" %8.8X %s-%u\n", ACPI_CA_VERSION, module_name,
- line_number);
+ ACPI_COMMON_MSG_SUFFIX;
va_end(args);
}
ACPI_EXPORT_SYMBOL(acpi_exception)
ACPI_EXPORT_SYMBOL(acpi_warning)
ACPI_EXPORT_SYMBOL(acpi_info)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_predefined_warning
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Pathname - Full pathname to the node
+ * node_flags - From Namespace node for the method/object
+ * Format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Warnings for the predefined validation module. Messages are
+ * only emitted the first time a problem with a particular
+ * method/object is detected. This prevents a flood of error
+ * messages for methods that are repeatedly evaluated.
+ *
+******************************************************************************/
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_predefined_warning(const char *module_name,
+ u32 line_number,
+ char *pathname,
+ u8 node_flags, const char *format, ...)
+{
+ va_list args;
+
+ /*
+ * Warning messages for this method/object will be disabled after the
+ * first time a validation fails or an object is successfully repaired.
+ */
+ if (node_flags & ANOBJ_EVALUATED) {
+ return;
+ }
+
+ acpi_os_printf("ACPI Warning for %s: ", pathname);
+
+ va_start(args, format);
+ acpi_os_vprintf(format, args);
+ ACPI_COMMON_MSG_SUFFIX;
+ va_end(args);
+}
}
/*
+ * Execute any module-level code that was detected during the table load
+ * phase. Although illegal since ACPI 2.0, there are many machines that
+ * contain this type of code. Each block of detected executable AML code
+ * outside of any control method is wrapped with a temporary control
+ * method object and placed on a global list. The methods on this list
+ * are executed below.
+ */
+ acpi_ns_exec_module_code_list();
+
+ /*
* Initialize the objects that remain uninitialized. This runs the
* executable AML that may be part of the declaration of these objects:
* operation_regions, buffer_fields, Buffers, and Packages.
*
* RETURN: Status
*
- * DESCRIPTION: Shutdown the ACPI subsystem. Release all resources.
+ * DESCRIPTION: Shutdown the ACPICA subsystem and release all resources.
*
******************************************************************************/
acpi_status acpi_terminate(void)
ACPI_FUNCTION_TRACE(acpi_terminate);
+ /* Just exit if subsystem is already shutdown */
+
+ if (acpi_gbl_shutdown) {
+ ACPI_ERROR((AE_INFO, "ACPI Subsystem is already terminated"));
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /* Subsystem appears active, go ahead and shut it down */
+
+ acpi_gbl_shutdown = TRUE;
+ acpi_gbl_startup_flags = 0;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem\n"));
+
/* Terminate the AML Debugger if present */
ACPI_DEBUGGER_EXEC(acpi_gbl_db_terminate_threads = TRUE);
}
ACPI_EXPORT_SYMBOL(acpi_terminate)
+
#ifndef ACPI_ASL_COMPILER
#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
#include <linux/types.h>
#include <linux/jiffies.h>
#include <linux/async.h>
+#include <linux/dmi.h>
#ifdef CONFIG_ACPI_PROCFS_POWER
#include <linux/proc_fs.h>
#include <linux/power_supply.h>
#endif
+#define PREFIX "ACPI: "
+
#define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF
#define ACPI_BATTERY_CLASS "battery"
MODULE_DEVICE_TABLE(acpi, battery_device_ids);
+/* For buggy DSDTs that report negative 16-bit values for either charging
+ * or discharging current and/or report 0 as 65536 due to bad math.
+ */
+#define QUIRK_SIGNED16_CURRENT 0x0001
struct acpi_battery {
struct mutex lock;
int state;
int power_unit;
u8 alarm_present;
+ long quirks;
};
#define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
state_offsets, ARRAY_SIZE(state_offsets));
battery->update_time = jiffies;
kfree(buffer.pointer);
+
+ if ((battery->quirks & QUIRK_SIGNED16_CURRENT) &&
+ battery->rate_now != -1)
+ battery->rate_now = abs((s16)battery->rate_now);
+
return result;
}
}
#endif
+static void acpi_battery_quirks(struct acpi_battery *battery)
+{
+ battery->quirks = 0;
+ if (dmi_name_in_vendors("Acer") && battery->power_unit) {
+ battery->quirks |= QUIRK_SIGNED16_CURRENT;
+ }
+}
+
static int acpi_battery_update(struct acpi_battery *battery)
{
int result, old_present = acpi_battery_present(battery);
result = acpi_battery_get_info(battery);
if (result)
return result;
+ acpi_battery_quirks(battery);
acpi_battery_init_alarm(battery);
}
#ifdef CONFIG_ACPI_SYSFS_POWER
#include <acpi/acpi_bus.h>
#include <linux/dmi.h>
+#include "internal.h"
+
enum acpi_blacklist_predicates {
all_versions,
less_than_or_equal,
#include <linux/pci.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#include <linux/dmi.h>
#include "internal.h"
EXPORT_SYMBOL(acpi_bus_get_status);
void acpi_bus_private_data_handler(acpi_handle handle,
- u32 function, void *context)
+ void *context)
{
return;
}
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define ACPI_BUTTON_CLASS "button"
#define ACPI_BUTTON_FILE_INFO "info"
#define ACPI_BUTTON_FILE_STATE "state"
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
ACPI_MODULE_NAME("cm_sbs");
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_BATTERY_CLASS "battery"
#include <acpi/acpi_drivers.h>
#include <acpi/container.h>
+#define PREFIX "ACPI: "
+
#define ACPI_CONTAINER_DEVICE_NAME "ACPI container device"
#define ACPI_CONTAINER_CLASS "container"
u32 lvl, void *context, void **rv)
{
char *hid = NULL;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_device_info *info;
acpi_status status;
int *action = context;
-
- status = acpi_get_object_info(handle, &buffer);
- if (ACPI_FAILURE(status) || !buffer.pointer) {
+ status = acpi_get_object_info(handle, &info);
+ if (ACPI_FAILURE(status)) {
return AE_OK;
}
- info = buffer.pointer;
if (info->valid & ACPI_VALID_HID)
- hid = info->hardware_id.value;
+ hid = info->hardware_id.string;
if (hid == NULL) {
goto end;
}
end:
- kfree(buffer.pointer);
+ kfree(info);
return AE_OK;
}
*/
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#define ACPI_SYSTEM_FILE_DEBUG_LAYER "debug_layer"
#define ACPI_SYSTEM_FILE_DEBUG_LEVEL "debug_level"
-static int
-acpi_system_read_debug(char *page,
- char **start, off_t off, int count, int *eof, void *data)
+static int acpi_system_debug_proc_show(struct seq_file *m, void *v)
{
- char *p = page;
- int size = 0;
unsigned int i;
- if (off != 0)
- goto end;
+ seq_printf(m, "%-25s\tHex SET\n", "Description");
- p += sprintf(p, "%-25s\tHex SET\n", "Description");
-
- switch ((unsigned long)data) {
+ switch ((unsigned long)m->private) {
case 0:
for (i = 0; i < ARRAY_SIZE(acpi_debug_layers); i++) {
- p += sprintf(p, "%-25s\t0x%08lX [%c]\n",
+ seq_printf(m, "%-25s\t0x%08lX [%c]\n",
acpi_debug_layers[i].name,
acpi_debug_layers[i].value,
(acpi_dbg_layer & acpi_debug_layers[i].
value) ? '*' : ' ');
}
- p += sprintf(p, "%-25s\t0x%08X [%c]\n", "ACPI_ALL_DRIVERS",
+ seq_printf(m, "%-25s\t0x%08X [%c]\n", "ACPI_ALL_DRIVERS",
ACPI_ALL_DRIVERS,
(acpi_dbg_layer & ACPI_ALL_DRIVERS) ==
ACPI_ALL_DRIVERS ? '*' : (acpi_dbg_layer &
ACPI_ALL_DRIVERS) ==
0 ? ' ' : '-');
- p += sprintf(p,
+ seq_printf(m,
"--\ndebug_layer = 0x%08X (* = enabled, - = partial)\n",
acpi_dbg_layer);
break;
case 1:
for (i = 0; i < ARRAY_SIZE(acpi_debug_levels); i++) {
- p += sprintf(p, "%-25s\t0x%08lX [%c]\n",
+ seq_printf(m, "%-25s\t0x%08lX [%c]\n",
acpi_debug_levels[i].name,
acpi_debug_levels[i].value,
(acpi_dbg_level & acpi_debug_levels[i].
value) ? '*' : ' ');
}
- p += sprintf(p, "--\ndebug_level = 0x%08X (* = enabled)\n",
+ seq_printf(m, "--\ndebug_level = 0x%08X (* = enabled)\n",
acpi_dbg_level);
break;
- default:
- p += sprintf(p, "Invalid debug option\n");
- break;
}
+ return 0;
+}
- end:
- size = (p - page);
- if (size <= off + count)
- *eof = 1;
- *start = page + off;
- size -= off;
- if (size > count)
- size = count;
- if (size < 0)
- size = 0;
-
- return size;
+static int acpi_system_debug_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, acpi_system_debug_proc_show, PDE(inode)->data);
}
-static int
-acpi_system_write_debug(struct file *file,
+static ssize_t acpi_system_debug_proc_write(struct file *file,
const char __user * buffer,
- unsigned long count, void *data)
+ size_t count, loff_t *pos)
{
char debug_string[12] = { '\0' };
debug_string[count] = '\0';
- switch ((unsigned long)data) {
+ switch ((unsigned long)PDE(file->f_path.dentry->d_inode)->data) {
case 0:
acpi_dbg_layer = simple_strtoul(debug_string, NULL, 0);
break;
return count;
}
+
+static const struct file_operations acpi_system_debug_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = acpi_system_debug_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = acpi_system_debug_proc_write,
+};
#endif
int __init acpi_debug_init(void)
/* 'debug_layer' [R/W] */
name = ACPI_SYSTEM_FILE_DEBUG_LAYER;
- entry =
- create_proc_read_entry(name, S_IFREG | S_IRUGO | S_IWUSR,
- acpi_root_dir, acpi_system_read_debug,
- (void *)0);
- if (entry)
- entry->write_proc = acpi_system_write_debug;
- else
+ entry = proc_create_data(name, S_IFREG | S_IRUGO | S_IWUSR,
+ acpi_root_dir, &acpi_system_debug_proc_fops,
+ (void *)0);
+ if (!entry)
goto Error;
/* 'debug_level' [R/W] */
name = ACPI_SYSTEM_FILE_DEBUG_LEVEL;
- entry =
- create_proc_read_entry(name, S_IFREG | S_IRUGO | S_IWUSR,
- acpi_root_dir, acpi_system_read_debug,
- (void *)1);
- if (entry)
- entry->write_proc = acpi_system_write_debug;
- else
+ entry = proc_create_data(name, S_IFREG | S_IRUGO | S_IWUSR,
+ acpi_root_dir, &acpi_system_debug_proc_fops,
+ (void *)1);
+ if (!entry)
goto Error;
Done:
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define ACPI_DOCK_DRIVER_DESCRIPTION "ACPI Dock Station Driver"
ACPI_MODULE_NAME("dock");
static int is_battery(acpi_handle handle)
{
struct acpi_device_info *info;
- struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
int ret = 1;
- if (!ACPI_SUCCESS(acpi_get_object_info(handle, &buffer)))
+ if (!ACPI_SUCCESS(acpi_get_object_info(handle, &info)))
return 0;
- info = buffer.pointer;
if (!(info->valid & ACPI_VALID_HID))
ret = 0;
else
- ret = !strcmp("PNP0C0A", info->hardware_id.value);
+ ret = !strcmp("PNP0C0A", info->hardware_id.string);
- kfree(buffer.pointer);
+ kfree(info);
return ret;
}
#include <asm/io.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#include <linux/dmi.h>
#define ACPI_EC_CLASS "embedded_controller"
#define ACPI_EC_DEVICE_NAME "Embedded Controller"
#define ACPI_EC_FILE_INFO "info"
-#undef PREFIX
#define PREFIX "ACPI: EC: "
/* EC status register */
#define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */
#define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */
#define ACPI_EC_CDELAY 10 /* Wait 10us before polling EC */
+#define ACPI_EC_MSI_UDELAY 550 /* Wait 550us for MSI EC */
#define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts
per one transaction */
enum {
EC_FLAGS_QUERY_PENDING, /* Query is pending */
- EC_FLAGS_GPE_MODE, /* Expect GPE to be sent
- * for status change */
- EC_FLAGS_NO_GPE, /* Don't use GPE mode */
EC_FLAGS_GPE_STORM, /* GPE storm detected */
EC_FLAGS_HANDLERS_INSTALLED /* Handlers for GPE and
* OpReg are installed */
acpi_ec_write_cmd(ec, ec->curr->command);
}
-static void gpe_transaction(struct acpi_ec *ec, u8 status)
+static void advance_transaction(struct acpi_ec *ec, u8 status)
{
unsigned long flags;
spin_lock_irqsave(&ec->curr_lock, flags);
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
-static int acpi_ec_wait(struct acpi_ec *ec)
-{
- if (wait_event_timeout(ec->wait, ec_transaction_done(ec),
- msecs_to_jiffies(ACPI_EC_DELAY)))
- return 0;
- /* try restart command if we get any false interrupts */
- if (ec->curr->irq_count &&
- (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) {
- pr_debug(PREFIX "controller reset, restart transaction\n");
- start_transaction(ec);
- if (wait_event_timeout(ec->wait, ec_transaction_done(ec),
- msecs_to_jiffies(ACPI_EC_DELAY)))
- return 0;
- }
- /* missing GPEs, switch back to poll mode */
- if (printk_ratelimit())
- pr_info(PREFIX "missing confirmations, "
- "switch off interrupt mode.\n");
- set_bit(EC_FLAGS_NO_GPE, &ec->flags);
- clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
- return 1;
-}
-
static void acpi_ec_gpe_query(void *ec_cxt);
static int ec_check_sci(struct acpi_ec *ec, u8 state)
return 0;
}
-static void ec_delay(void)
-{
- /* EC in MSI notebooks don't tolerate delays other than 550 usec */
- if (EC_FLAGS_MSI)
- udelay(ACPI_EC_DELAY);
- else
- /* Use shortest sleep available */
- msleep(1);
-}
-
static int ec_poll(struct acpi_ec *ec)
{
- unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
- udelay(ACPI_EC_CDELAY);
- while (time_before(jiffies, delay)) {
- gpe_transaction(ec, acpi_ec_read_status(ec));
- ec_delay();
- if (ec_transaction_done(ec))
- return 0;
+ unsigned long flags;
+ int repeat = 2; /* number of command restarts */
+ while (repeat--) {
+ unsigned long delay = jiffies +
+ msecs_to_jiffies(ACPI_EC_DELAY);
+ do {
+ /* don't sleep with disabled interrupts */
+ if (EC_FLAGS_MSI || irqs_disabled()) {
+ udelay(ACPI_EC_MSI_UDELAY);
+ if (ec_transaction_done(ec))
+ return 0;
+ } else {
+ if (wait_event_timeout(ec->wait,
+ ec_transaction_done(ec),
+ msecs_to_jiffies(1)))
+ return 0;
+ }
+ advance_transaction(ec, acpi_ec_read_status(ec));
+ } while (time_before(jiffies, delay));
+ if (!ec->curr->irq_count ||
+ (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF))
+ break;
+ /* try restart command if we get any false interrupts */
+ pr_debug(PREFIX "controller reset, restart transaction\n");
+ spin_lock_irqsave(&ec->curr_lock, flags);
+ start_transaction(ec);
+ spin_unlock_irqrestore(&ec->curr_lock, flags);
}
return -ETIME;
}
static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
- struct transaction *t,
- int force_poll)
+ struct transaction *t)
{
unsigned long tmp;
int ret = 0;
pr_debug(PREFIX "transaction start\n");
/* disable GPE during transaction if storm is detected */
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
- clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_disable_gpe(NULL, ec->gpe);
}
if (EC_FLAGS_MSI)
- udelay(ACPI_EC_DELAY);
+ udelay(ACPI_EC_MSI_UDELAY);
/* start transaction */
spin_lock_irqsave(&ec->curr_lock, tmp);
/* following two actions should be kept atomic */
if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
spin_unlock_irqrestore(&ec->curr_lock, tmp);
- /* if we selected poll mode or failed in GPE-mode do a poll loop */
- if (force_poll ||
- !test_bit(EC_FLAGS_GPE_MODE, &ec->flags) ||
- acpi_ec_wait(ec))
- ret = ec_poll(ec);
+ ret = ec_poll(ec);
pr_debug(PREFIX "transaction end\n");
spin_lock_irqsave(&ec->curr_lock, tmp);
ec->curr = NULL;
ec_check_sci(ec, acpi_ec_read_status(ec));
/* it is safe to enable GPE outside of transaction */
acpi_enable_gpe(NULL, ec->gpe);
- } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
- t->irq_count > ACPI_EC_STORM_THRESHOLD) {
+ } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
pr_info(PREFIX "GPE storm detected, "
"transactions will use polling mode\n");
set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
{
unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY);
/* interrupt wait manually if GPE mode is not active */
- unsigned long timeout = test_bit(EC_FLAGS_GPE_MODE, &ec->flags) ?
- msecs_to_jiffies(ACPI_EC_DELAY) : msecs_to_jiffies(1);
while (time_before(jiffies, delay))
- if (wait_event_timeout(ec->wait, ec_check_ibf0(ec), timeout))
+ if (wait_event_timeout(ec->wait, ec_check_ibf0(ec),
+ msecs_to_jiffies(1)))
return 0;
return -ETIME;
}
-static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t,
- int force_poll)
+static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
{
int status;
u32 glk;
status = -ETIME;
goto end;
}
- status = acpi_ec_transaction_unlocked(ec, t, force_poll);
+ status = acpi_ec_transaction_unlocked(ec, t);
end:
if (ec->global_lock)
acpi_release_global_lock(glk);
return status;
}
-/*
- * Note: samsung nv5000 doesn't work with ec burst mode.
- * http://bugzilla.kernel.org/show_bug.cgi?id=4980
- */
static int acpi_ec_burst_enable(struct acpi_ec *ec)
{
u8 d;
.wdata = NULL, .rdata = &d,
.wlen = 0, .rlen = 1};
- return acpi_ec_transaction(ec, &t, 0);
+ return acpi_ec_transaction(ec, &t);
}
static int acpi_ec_burst_disable(struct acpi_ec *ec)
.wlen = 0, .rlen = 0};
return (acpi_ec_read_status(ec) & ACPI_EC_FLAG_BURST) ?
- acpi_ec_transaction(ec, &t, 0) : 0;
+ acpi_ec_transaction(ec, &t) : 0;
}
static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 * data)
.wdata = &address, .rdata = &d,
.wlen = 1, .rlen = 1};
- result = acpi_ec_transaction(ec, &t, 0);
+ result = acpi_ec_transaction(ec, &t);
*data = d;
return result;
}
.wdata = wdata, .rdata = NULL,
.wlen = 2, .rlen = 0};
- return acpi_ec_transaction(ec, &t, 0);
+ return acpi_ec_transaction(ec, &t);
}
/*
if (!first_ec)
return -ENODEV;
- return acpi_ec_transaction(first_ec, &t, force_poll);
+ return acpi_ec_transaction(first_ec, &t);
}
EXPORT_SYMBOL(ec_transaction);
* bit to be cleared (and thus clearing the interrupt source).
*/
- result = acpi_ec_transaction(ec, &t, 0);
+ result = acpi_ec_transaction(ec, &t);
if (result)
return result;
pr_debug(PREFIX "~~~> interrupt\n");
status = acpi_ec_read_status(ec);
- if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) {
- gpe_transaction(ec, status);
- if (ec_transaction_done(ec) &&
- (status & ACPI_EC_FLAG_IBF) == 0)
- wake_up(&ec->wait);
- }
-
+ advance_transaction(ec, status);
+ if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0)
+ wake_up(&ec->wait);
ec_check_sci(ec, status);
- if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) &&
- !test_bit(EC_FLAGS_NO_GPE, &ec->flags)) {
- /* this is non-query, must be confirmation */
- if (!test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
- if (printk_ratelimit())
- pr_info(PREFIX "non-query interrupt received,"
- " switching to interrupt mode\n");
- } else {
- /* hush, STORM switches the mode every transaction */
- pr_debug(PREFIX "non-query interrupt received,"
- " switching to interrupt mode\n");
- }
- set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
- }
return ACPI_INTERRUPT_HANDLED;
}
if (bits != 8 && acpi_strict)
return AE_BAD_PARAMETER;
- acpi_ec_burst_enable(ec);
+ if (EC_FLAGS_MSI)
+ acpi_ec_burst_enable(ec);
if (function == ACPI_READ) {
result = acpi_ec_read(ec, address, &temp);
}
}
- acpi_ec_burst_disable(ec);
+ if (EC_FLAGS_MSI)
+ acpi_ec_burst_disable(ec);
switch (result) {
case -EINVAL:
return AE_CTRL_TERMINATE;
}
+static int ec_install_handlers(struct acpi_ec *ec)
+{
+ acpi_status status;
+ if (test_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags))
+ return 0;
+ status = acpi_install_gpe_handler(NULL, ec->gpe,
+ ACPI_GPE_EDGE_TRIGGERED,
+ &acpi_ec_gpe_handler, ec);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
+ acpi_enable_gpe(NULL, ec->gpe);
+ status = acpi_install_address_space_handler(ec->handle,
+ ACPI_ADR_SPACE_EC,
+ &acpi_ec_space_handler,
+ NULL, ec);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_NOT_FOUND) {
+ /*
+ * Maybe OS fails in evaluating the _REG object.
+ * The AE_NOT_FOUND error will be ignored and OS
+ * continue to initialize EC.
+ */
+ printk(KERN_ERR "Fail in evaluating the _REG object"
+ " of EC device. Broken bios is suspected.\n");
+ } else {
+ acpi_remove_gpe_handler(NULL, ec->gpe,
+ &acpi_ec_gpe_handler);
+ return -ENODEV;
+ }
+ }
+
+ set_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
+ return 0;
+}
+
static void ec_remove_handlers(struct acpi_ec *ec)
{
if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
static int acpi_ec_add(struct acpi_device *device)
{
struct acpi_ec *ec = NULL;
+ int ret;
- if (!device)
- return -EINVAL;
strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_EC_CLASS);
acpi_ec_add_fs(device);
pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
ec->gpe, ec->command_addr, ec->data_addr);
- pr_info(PREFIX "driver started in %s mode\n",
- (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll");
- return 0;
+
+ ret = ec_install_handlers(ec);
+
+ /* EC is fully operational, allow queries */
+ clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
+ return ret;
}
static int acpi_ec_remove(struct acpi_device *device, int type)
return -EINVAL;
ec = acpi_driver_data(device);
+ ec_remove_handlers(ec);
mutex_lock(&ec->lock);
list_for_each_entry_safe(handler, tmp, &ec->list, node) {
list_del(&handler->node);
return AE_OK;
}
-static int ec_install_handlers(struct acpi_ec *ec)
-{
- acpi_status status;
- if (test_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags))
- return 0;
- status = acpi_install_gpe_handler(NULL, ec->gpe,
- ACPI_GPE_EDGE_TRIGGERED,
- &acpi_ec_gpe_handler, ec);
- if (ACPI_FAILURE(status))
- return -ENODEV;
- acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME);
- acpi_enable_gpe(NULL, ec->gpe);
- status = acpi_install_address_space_handler(ec->handle,
- ACPI_ADR_SPACE_EC,
- &acpi_ec_space_handler,
- NULL, ec);
- if (ACPI_FAILURE(status)) {
- if (status == AE_NOT_FOUND) {
- /*
- * Maybe OS fails in evaluating the _REG object.
- * The AE_NOT_FOUND error will be ignored and OS
- * continue to initialize EC.
- */
- printk(KERN_ERR "Fail in evaluating the _REG object"
- " of EC device. Broken bios is suspected.\n");
- } else {
- acpi_remove_gpe_handler(NULL, ec->gpe,
- &acpi_ec_gpe_handler);
- return -ENODEV;
- }
- }
-
- set_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags);
- return 0;
-}
-
-static int acpi_ec_start(struct acpi_device *device)
-{
- struct acpi_ec *ec;
- int ret = 0;
-
- if (!device)
- return -EINVAL;
-
- ec = acpi_driver_data(device);
-
- if (!ec)
- return -EINVAL;
-
- ret = ec_install_handlers(ec);
-
- /* EC is fully operational, allow queries */
- clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
- return ret;
-}
-
-static int acpi_ec_stop(struct acpi_device *device, int type)
-{
- struct acpi_ec *ec;
- if (!device)
- return -EINVAL;
- ec = acpi_driver_data(device);
- if (!ec)
- return -EINVAL;
- ec_remove_handlers(ec);
-
- return 0;
-}
-
int __init acpi_boot_ec_enable(void)
{
if (!boot_ec || test_bit(EC_FLAGS_HANDLERS_INSTALLED, &boot_ec->flags))
{
struct acpi_ec *ec = acpi_driver_data(device);
/* Stop using GPE */
- set_bit(EC_FLAGS_NO_GPE, &ec->flags);
- clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_disable_gpe(NULL, ec->gpe);
return 0;
}
{
struct acpi_ec *ec = acpi_driver_data(device);
/* Enable use of GPE back */
- clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
- set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_enable_gpe(NULL, ec->gpe);
return 0;
}
.ops = {
.add = acpi_ec_add,
.remove = acpi_ec_remove,
- .start = acpi_ec_start,
- .stop = acpi_ec_stop,
.suspend = acpi_ec_suspend,
.resume = acpi_ec_resume,
},
#include <net/netlink.h>
#include <net/genetlink.h>
+#include "internal.h"
+
#define _COMPONENT ACPI_SYSTEM_COMPONENT
ACPI_MODULE_NAME("event");
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define ACPI_FAN_CLASS "fan"
#define ACPI_FAN_FILE_STATE "state"
#include <linux/rwsem.h>
#include <linux/acpi.h>
+#include "internal.h"
+
#define ACPI_GLUE_DEBUG 0
#if ACPI_GLUE_DEBUG
#define DBG(x...) printk(PREFIX x)
{
acpi_status status;
struct acpi_device_info *info;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_find_child *find = context;
- status = acpi_get_object_info(handle, &buffer);
+ status = acpi_get_object_info(handle, &info);
if (ACPI_SUCCESS(status)) {
- info = buffer.pointer;
if (info->address == find->address)
find->handle = handle;
- kfree(buffer.pointer);
+ kfree(info);
}
return AE_OK;
}
/* Link ACPI devices with physical devices */
static void acpi_glue_data_handler(acpi_handle handle,
- u32 function, void *context)
+ void *context)
{
/* we provide an empty handler */
}
-/* For use by Linux/ACPI infrastructure, not drivers */
+/*
+ * acpi/internal.h
+ * For use by Linux/ACPI infrastructure, not drivers
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#define PREFIX "ACPI: "
int init_acpi_device_notify(void);
int acpi_scan_init(void);
#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
+#define PREFIX "ACPI: "
+
#define ACPI_NUMA 0x80000000
#define _COMPONENT ACPI_NUMA
ACPI_MODULE_NAME("numa");
acpi_osd_exec_callback function;
void *context;
struct work_struct work;
+ int wait;
};
#ifdef CONFIG_ACPI_CUSTOM_DSDT
char name[5]; /* only can have a length of 4 chars, make use of this
one instead of res->name, no need to kalloc then */
struct list_head resource_list;
+ int count;
};
static LIST_HEAD(resource_list_head);
static void acpi_os_execute_deferred(struct work_struct *work)
{
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
- if (!dpc) {
- printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
- return;
- }
-
- dpc->function(dpc->context);
- kfree(dpc);
-
- return;
-}
-
-static void acpi_os_execute_hp_deferred(struct work_struct *work)
-{
- struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
- if (!dpc) {
- printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
- return;
- }
- acpi_os_wait_events_complete(NULL);
+ if (dpc->wait)
+ acpi_os_wait_events_complete(NULL);
dpc->function(dpc->context);
kfree(dpc);
-
- return;
}
/*******************************************************************************
acpi_status status = AE_OK;
struct acpi_os_dpc *dpc;
struct workqueue_struct *queue;
- work_func_t func;
int ret;
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Scheduling function [%p(%p)] for deferred execution.\n",
function, context));
- if (!function)
- return AE_BAD_PARAMETER;
-
/*
* Allocate/initialize DPC structure. Note that this memory will be
* freed by the callee. The kernel handles the work_struct list in a
*/
queue = hp ? kacpi_hotplug_wq :
(type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
- func = hp ? acpi_os_execute_hp_deferred : acpi_os_execute_deferred;
- INIT_WORK(&dpc->work, func);
+ dpc->wait = hp ? 1 : 0;
+ INIT_WORK(&dpc->work, acpi_os_execute_deferred);
ret = queue_work(queue, &dpc->work);
if (!ret) {
return AE_SUPPORT;
}
+static inline int acpi_res_list_add(struct acpi_res_list *res)
+{
+ struct acpi_res_list *res_list_elem;
+
+ list_for_each_entry(res_list_elem, &resource_list_head,
+ resource_list) {
+
+ if (res->resource_type == res_list_elem->resource_type &&
+ res->start == res_list_elem->start &&
+ res->end == res_list_elem->end) {
+
+ /*
+ * The Region(addr,len) already exist in the list,
+ * just increase the count
+ */
+
+ res_list_elem->count++;
+ return 0;
+ }
+ }
+
+ res->count = 1;
+ list_add(&res->resource_list, &resource_list_head);
+ return 1;
+}
+
+static inline void acpi_res_list_del(struct acpi_res_list *res)
+{
+ struct acpi_res_list *res_list_elem;
+
+ list_for_each_entry(res_list_elem, &resource_list_head,
+ resource_list) {
+
+ if (res->resource_type == res_list_elem->resource_type &&
+ res->start == res_list_elem->start &&
+ res->end == res_list_elem->end) {
+
+ /*
+ * If the res count is decreased to 0,
+ * remove and free it
+ */
+
+ if (--res_list_elem->count == 0) {
+ list_del(&res_list_elem->resource_list);
+ kfree(res_list_elem);
+ }
+ return;
+ }
+ }
+}
+
+acpi_status
+acpi_os_invalidate_address(
+ u8 space_id,
+ acpi_physical_address address,
+ acpi_size length)
+{
+ struct acpi_res_list res;
+
+ switch (space_id) {
+ case ACPI_ADR_SPACE_SYSTEM_IO:
+ case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+ /* Only interference checks against SystemIO and SytemMemory
+ are needed */
+ res.start = address;
+ res.end = address + length - 1;
+ res.resource_type = space_id;
+ spin_lock(&acpi_res_lock);
+ acpi_res_list_del(&res);
+ spin_unlock(&acpi_res_lock);
+ break;
+ case ACPI_ADR_SPACE_PCI_CONFIG:
+ case ACPI_ADR_SPACE_EC:
+ case ACPI_ADR_SPACE_SMBUS:
+ case ACPI_ADR_SPACE_CMOS:
+ case ACPI_ADR_SPACE_PCI_BAR_TARGET:
+ case ACPI_ADR_SPACE_DATA_TABLE:
+ case ACPI_ADR_SPACE_FIXED_HARDWARE:
+ break;
+ }
+ return AE_OK;
+}
+
/******************************************************************************
*
* FUNCTION: acpi_os_validate_address
char *name)
{
struct acpi_res_list *res;
+ int added;
if (acpi_enforce_resources == ENFORCE_RESOURCES_NO)
return AE_OK;
res->end = address + length - 1;
res->resource_type = space_id;
spin_lock(&acpi_res_lock);
- list_add(&res->resource_list, &resource_list_head);
+ added = acpi_res_list_add(res);
spin_unlock(&acpi_res_lock);
- pr_debug("Added %s resource: start: 0x%llx, end: 0x%llx, "
- "name: %s\n", (space_id == ACPI_ADR_SPACE_SYSTEM_IO)
+ pr_debug("%s %s resource: start: 0x%llx, end: 0x%llx, "
+ "name: %s\n", added ? "Added" : "Already exist",
+ (space_id == ACPI_ADR_SPACE_SYSTEM_IO)
? "SystemIO" : "System Memory",
(unsigned long long)res->start,
(unsigned long long)res->end,
res->name);
+ if (!added)
+ kfree(res);
break;
case ACPI_ADR_SPACE_PCI_CONFIG:
case ACPI_ADR_SPACE_EC:
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_irq");
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_link");
#define ACPI_PCI_LINK_CLASS "pci_irq_routing"
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_root");
#define ACPI_PCI_ROOT_CLASS "pci_bridge"
#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#include <linux/dmi.h>
static int debug;
static int check_sta_before_sun;
MY_NAME , ## arg); \
} while (0)
-#define SLOT_NAME_SIZE 20 /* Inspired by #define in acpiphp.h */
+#define SLOT_NAME_SIZE 21 /* Inspired by #define in acpiphp.h */
struct acpi_pci_slot {
acpi_handle root_handle; /* handle of the root bridge */
return AE_OK;
}
- snprintf(name, sizeof(name), "%u", (u32)sun);
+ snprintf(name, sizeof(name), "%llu", sun);
pci_slot = pci_create_slot(pci_bus, device, name, NULL);
if (IS_ERR(pci_slot)) {
err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot));
#include <linux/seq_file.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-
#include "sleep.h"
+#define PREFIX "ACPI: "
+
#define _COMPONENT ACPI_POWER_COMPONENT
ACPI_MODULE_NAME("power");
#define ACPI_POWER_CLASS "power_resource"
--- /dev/null
+/*
+ * A hwmon driver for ACPI 4.0 power meters
+ * Copyright (C) 2009 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/dmi.h>
+#include <linux/kdev_t.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/acpi_bus.h>
+
+#define ACPI_POWER_METER_NAME "power_meter"
+ACPI_MODULE_NAME(ACPI_POWER_METER_NAME);
+#define ACPI_POWER_METER_DEVICE_NAME "Power Meter"
+#define ACPI_POWER_METER_CLASS "power_meter_resource"
+
+#define NUM_SENSORS 17
+
+#define POWER_METER_CAN_MEASURE (1 << 0)
+#define POWER_METER_CAN_TRIP (1 << 1)
+#define POWER_METER_CAN_CAP (1 << 2)
+#define POWER_METER_CAN_NOTIFY (1 << 3)
+#define POWER_METER_IS_BATTERY (1 << 8)
+#define UNKNOWN_HYSTERESIS 0xFFFFFFFF
+
+#define METER_NOTIFY_CONFIG 0x80
+#define METER_NOTIFY_TRIP 0x81
+#define METER_NOTIFY_CAP 0x82
+#define METER_NOTIFY_CAPPING 0x83
+#define METER_NOTIFY_INTERVAL 0x84
+
+#define POWER_AVERAGE_NAME "power1_average"
+#define POWER_CAP_NAME "power1_cap"
+#define POWER_AVG_INTERVAL_NAME "power1_average_interval"
+#define POWER_ALARM_NAME "power1_alarm"
+
+static int cap_in_hardware;
+static int force_cap_on;
+
+static int can_cap_in_hardware(void)
+{
+ return force_cap_on || cap_in_hardware;
+}
+
+static struct acpi_device_id power_meter_ids[] = {
+ {"ACPI000D", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, power_meter_ids);
+
+struct acpi_power_meter_capabilities {
+ acpi_integer flags;
+ acpi_integer units;
+ acpi_integer type;
+ acpi_integer accuracy;
+ acpi_integer sampling_time;
+ acpi_integer min_avg_interval;
+ acpi_integer max_avg_interval;
+ acpi_integer hysteresis;
+ acpi_integer configurable_cap;
+ acpi_integer min_cap;
+ acpi_integer max_cap;
+};
+
+struct acpi_power_meter_resource {
+ struct acpi_device *acpi_dev;
+ acpi_bus_id name;
+ struct mutex lock;
+ struct device *hwmon_dev;
+ struct acpi_power_meter_capabilities caps;
+ acpi_string model_number;
+ acpi_string serial_number;
+ acpi_string oem_info;
+ acpi_integer power;
+ acpi_integer cap;
+ acpi_integer avg_interval;
+ int sensors_valid;
+ unsigned long sensors_last_updated;
+ struct sensor_device_attribute sensors[NUM_SENSORS];
+ int num_sensors;
+ int trip[2];
+ int num_domain_devices;
+ struct acpi_device **domain_devices;
+ struct kobject *holders_dir;
+};
+
+struct ro_sensor_template {
+ char *label;
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+ int index;
+};
+
+struct rw_sensor_template {
+ char *label;
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+ ssize_t (*set)(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count);
+ int index;
+};
+
+/* Averaging interval */
+static int update_avg_interval(struct acpi_power_meter_resource *resource)
+{
+ unsigned long long data;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(resource->acpi_dev->handle, "_GAI",
+ NULL, &data);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _GAI"));
+ return -ENODEV;
+ }
+
+ resource->avg_interval = data;
+ return 0;
+}
+
+static ssize_t show_avg_interval(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
+
+ mutex_lock(&resource->lock);
+ update_avg_interval(resource);
+ mutex_unlock(&resource->lock);
+
+ return sprintf(buf, "%llu\n", resource->avg_interval);
+}
+
+static ssize_t set_avg_interval(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
+ union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list args = { 1, &arg0 };
+ int res;
+ unsigned long temp;
+ unsigned long long data;
+ acpi_status status;
+
+ res = strict_strtoul(buf, 10, &temp);
+ if (res)
+ return res;
+
+ if (temp > resource->caps.max_avg_interval ||
+ temp < resource->caps.min_avg_interval)
+ return -EINVAL;
+ arg0.integer.value = temp;
+
+ mutex_lock(&resource->lock);
+ status = acpi_evaluate_integer(resource->acpi_dev->handle, "_PAI",
+ &args, &data);
+ if (!ACPI_FAILURE(status))
+ resource->avg_interval = temp;
+ mutex_unlock(&resource->lock);
+
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PAI"));
+ return -EINVAL;
+ }
+
+ /* _PAI returns 0 on success, nonzero otherwise */
+ if (data)
+ return -EINVAL;
+
+ return count;
+}
+
+/* Cap functions */
+static int update_cap(struct acpi_power_meter_resource *resource)
+{
+ unsigned long long data;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(resource->acpi_dev->handle, "_GHL",
+ NULL, &data);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _GHL"));
+ return -ENODEV;
+ }
+
+ resource->cap = data;
+ return 0;
+}
+
+static ssize_t show_cap(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
+
+ mutex_lock(&resource->lock);
+ update_cap(resource);
+ mutex_unlock(&resource->lock);
+
+ return sprintf(buf, "%llu\n", resource->cap * 1000);
+}
+
+static ssize_t set_cap(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
+ union acpi_object arg0 = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list args = { 1, &arg0 };
+ int res;
+ unsigned long temp;
+ unsigned long long data;
+ acpi_status status;
+
+ res = strict_strtoul(buf, 10, &temp);
+ if (res)
+ return res;
+
+ temp /= 1000;
+ if (temp > resource->caps.max_cap || temp < resource->caps.min_cap)
+ return -EINVAL;
+ arg0.integer.value = temp;
+
+ mutex_lock(&resource->lock);
+ status = acpi_evaluate_integer(resource->acpi_dev->handle, "_SHL",
+ &args, &data);
+ if (!ACPI_FAILURE(status))
+ resource->cap = temp;
+ mutex_unlock(&resource->lock);
+
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SHL"));
+ return -EINVAL;
+ }
+
+ /* _SHL returns 0 on success, nonzero otherwise */
+ if (data)
+ return -EINVAL;
+
+ return count;
+}
+
+/* Power meter trip points */
+static int set_acpi_trip(struct acpi_power_meter_resource *resource)
+{
+ union acpi_object arg_objs[] = {
+ {ACPI_TYPE_INTEGER},
+ {ACPI_TYPE_INTEGER}
+ };
+ struct acpi_object_list args = { 2, arg_objs };
+ unsigned long long data;
+ acpi_status status;
+
+ /* Both trip levels must be set */
+ if (resource->trip[0] < 0 || resource->trip[1] < 0)
+ return 0;
+
+ /* This driver stores min, max; ACPI wants max, min. */
+ arg_objs[0].integer.value = resource->trip[1];
+ arg_objs[1].integer.value = resource->trip[0];
+
+ status = acpi_evaluate_integer(resource->acpi_dev->handle, "_PTP",
+ &args, &data);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTP"));
+ return -EINVAL;
+ }
+
+ return data;
+}
+
+static ssize_t set_trip(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
+ int res;
+ unsigned long temp;
+
+ res = strict_strtoul(buf, 10, &temp);
+ if (res)
+ return res;
+
+ temp /= 1000;
+ if (temp < 0)
+ return -EINVAL;
+
+ mutex_lock(&resource->lock);
+ resource->trip[attr->index - 7] = temp;
+ res = set_acpi_trip(resource);
+ mutex_unlock(&resource->lock);
+
+ if (res)
+ return res;
+
+ return count;
+}
+
+/* Power meter */
+static int update_meter(struct acpi_power_meter_resource *resource)
+{
+ unsigned long long data;
+ acpi_status status;
+ unsigned long local_jiffies = jiffies;
+
+ if (time_before(local_jiffies, resource->sensors_last_updated +
+ msecs_to_jiffies(resource->caps.sampling_time)) &&
+ resource->sensors_valid)
+ return 0;
+
+ status = acpi_evaluate_integer(resource->acpi_dev->handle, "_PMM",
+ NULL, &data);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PMM"));
+ return -ENODEV;
+ }
+
+ resource->power = data;
+ resource->sensors_valid = 1;
+ resource->sensors_last_updated = jiffies;
+ return 0;
+}
+
+static ssize_t show_power(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
+
+ mutex_lock(&resource->lock);
+ update_meter(resource);
+ mutex_unlock(&resource->lock);
+
+ return sprintf(buf, "%llu\n", resource->power * 1000);
+}
+
+/* Miscellaneous */
+static ssize_t show_str(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
+ acpi_string val;
+
+ switch (attr->index) {
+ case 0:
+ val = resource->model_number;
+ break;
+ case 1:
+ val = resource->serial_number;
+ break;
+ case 2:
+ val = resource->oem_info;
+ break;
+ default:
+ BUG();
+ }
+
+ return sprintf(buf, "%s\n", val);
+}
+
+static ssize_t show_val(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
+ acpi_integer val = 0;
+
+ switch (attr->index) {
+ case 0:
+ val = resource->caps.min_avg_interval;
+ break;
+ case 1:
+ val = resource->caps.max_avg_interval;
+ break;
+ case 2:
+ val = resource->caps.min_cap * 1000;
+ break;
+ case 3:
+ val = resource->caps.max_cap * 1000;
+ break;
+ case 4:
+ if (resource->caps.hysteresis == UNKNOWN_HYSTERESIS)
+ return sprintf(buf, "unknown\n");
+
+ val = resource->caps.hysteresis * 1000;
+ break;
+ case 5:
+ if (resource->caps.flags & POWER_METER_IS_BATTERY)
+ val = 1;
+ else
+ val = 0;
+ break;
+ case 6:
+ if (resource->power > resource->cap)
+ val = 1;
+ else
+ val = 0;
+ break;
+ case 7:
+ case 8:
+ if (resource->trip[attr->index - 7] < 0)
+ return sprintf(buf, "unknown\n");
+
+ val = resource->trip[attr->index - 7] * 1000;
+ break;
+ default:
+ BUG();
+ }
+
+ return sprintf(buf, "%llu\n", val);
+}
+
+static ssize_t show_accuracy(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_power_meter_resource *resource = acpi_dev->driver_data;
+ unsigned int acc = resource->caps.accuracy;
+
+ return sprintf(buf, "%u.%u%%\n", acc / 1000, acc % 1000);
+}
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", ACPI_POWER_METER_NAME);
+}
+
+/* Sensor descriptions. If you add a sensor, update NUM_SENSORS above! */
+static struct ro_sensor_template meter_ro_attrs[] = {
+{POWER_AVERAGE_NAME, show_power, 0},
+{"power1_accuracy", show_accuracy, 0},
+{"power1_average_interval_min", show_val, 0},
+{"power1_average_interval_max", show_val, 1},
+{"power1_is_battery", show_val, 5},
+{NULL, NULL, 0},
+};
+
+static struct rw_sensor_template meter_rw_attrs[] = {
+{POWER_AVG_INTERVAL_NAME, show_avg_interval, set_avg_interval, 0},
+{NULL, NULL, NULL, 0},
+};
+
+static struct ro_sensor_template misc_cap_attrs[] = {
+{"power1_cap_min", show_val, 2},
+{"power1_cap_max", show_val, 3},
+{"power1_cap_hyst", show_val, 4},
+{POWER_ALARM_NAME, show_val, 6},
+{NULL, NULL, 0},
+};
+
+static struct ro_sensor_template ro_cap_attrs[] = {
+{POWER_CAP_NAME, show_cap, 0},
+{NULL, NULL, 0},
+};
+
+static struct rw_sensor_template rw_cap_attrs[] = {
+{POWER_CAP_NAME, show_cap, set_cap, 0},
+{NULL, NULL, NULL, 0},
+};
+
+static struct rw_sensor_template trip_attrs[] = {
+{"power1_average_min", show_val, set_trip, 7},
+{"power1_average_max", show_val, set_trip, 8},
+{NULL, NULL, NULL, 0},
+};
+
+static struct ro_sensor_template misc_attrs[] = {
+{"name", show_name, 0},
+{"power1_model_number", show_str, 0},
+{"power1_oem_info", show_str, 2},
+{"power1_serial_number", show_str, 1},
+{NULL, NULL, 0},
+};
+
+/* Read power domain data */
+static void remove_domain_devices(struct acpi_power_meter_resource *resource)
+{
+ int i;
+
+ if (!resource->num_domain_devices)
+ return;
+
+ for (i = 0; i < resource->num_domain_devices; i++) {
+ struct acpi_device *obj = resource->domain_devices[i];
+ if (!obj)
+ continue;
+
+ sysfs_remove_link(resource->holders_dir,
+ kobject_name(&obj->dev.kobj));
+ put_device(&obj->dev);
+ }
+
+ kfree(resource->domain_devices);
+ kobject_put(resource->holders_dir);
+}
+
+static int read_domain_devices(struct acpi_power_meter_resource *resource)
+{
+ int res = 0;
+ int i;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *pss;
+ acpi_status status;
+
+ status = acpi_evaluate_object(resource->acpi_dev->handle, "_PMD", NULL,
+ &buffer);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PMD"));
+ return -ENODEV;
+ }
+
+ pss = buffer.pointer;
+ if (!pss ||
+ pss->type != ACPI_TYPE_PACKAGE) {
+ dev_err(&resource->acpi_dev->dev, ACPI_POWER_METER_NAME
+ "Invalid _PMD data\n");
+ res = -EFAULT;
+ goto end;
+ }
+
+ if (!pss->package.count)
+ goto end;
+
+ resource->domain_devices = kzalloc(sizeof(struct acpi_device *) *
+ pss->package.count, GFP_KERNEL);
+ if (!resource->domain_devices) {
+ res = -ENOMEM;
+ goto end;
+ }
+
+ resource->holders_dir = kobject_create_and_add("measures",
+ &resource->acpi_dev->dev.kobj);
+ if (!resource->holders_dir) {
+ res = -ENOMEM;
+ goto exit_free;
+ }
+
+ resource->num_domain_devices = pss->package.count;
+
+ for (i = 0; i < pss->package.count; i++) {
+ struct acpi_device *obj;
+ union acpi_object *element = &(pss->package.elements[i]);
+
+ /* Refuse non-references */
+ if (element->type != ACPI_TYPE_LOCAL_REFERENCE)
+ continue;
+
+ /* Create a symlink to domain objects */
+ resource->domain_devices[i] = NULL;
+ status = acpi_bus_get_device(element->reference.handle,
+ &resource->domain_devices[i]);
+ if (ACPI_FAILURE(status))
+ continue;
+
+ obj = resource->domain_devices[i];
+ get_device(&obj->dev);
+
+ res = sysfs_create_link(resource->holders_dir, &obj->dev.kobj,
+ kobject_name(&obj->dev.kobj));
+ if (res) {
+ put_device(&obj->dev);
+ resource->domain_devices[i] = NULL;
+ }
+ }
+
+ res = 0;
+ goto end;
+
+exit_free:
+ kfree(resource->domain_devices);
+end:
+ kfree(buffer.pointer);
+ return res;
+}
+
+/* Registration and deregistration */
+static int register_ro_attrs(struct acpi_power_meter_resource *resource,
+ struct ro_sensor_template *ro)
+{
+ struct device *dev = &resource->acpi_dev->dev;
+ struct sensor_device_attribute *sensors =
+ &resource->sensors[resource->num_sensors];
+ int res = 0;
+
+ while (ro->label) {
+ sensors->dev_attr.attr.name = ro->label;
+ sensors->dev_attr.attr.mode = S_IRUGO;
+ sensors->dev_attr.show = ro->show;
+ sensors->index = ro->index;
+
+ res = device_create_file(dev, &sensors->dev_attr);
+ if (res) {
+ sensors->dev_attr.attr.name = NULL;
+ goto error;
+ }
+ sensors++;
+ resource->num_sensors++;
+ ro++;
+ }
+
+error:
+ return res;
+}
+
+static int register_rw_attrs(struct acpi_power_meter_resource *resource,
+ struct rw_sensor_template *rw)
+{
+ struct device *dev = &resource->acpi_dev->dev;
+ struct sensor_device_attribute *sensors =
+ &resource->sensors[resource->num_sensors];
+ int res = 0;
+
+ while (rw->label) {
+ sensors->dev_attr.attr.name = rw->label;
+ sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR;
+ sensors->dev_attr.show = rw->show;
+ sensors->dev_attr.store = rw->set;
+ sensors->index = rw->index;
+
+ res = device_create_file(dev, &sensors->dev_attr);
+ if (res) {
+ sensors->dev_attr.attr.name = NULL;
+ goto error;
+ }
+ sensors++;
+ resource->num_sensors++;
+ rw++;
+ }
+
+error:
+ return res;
+}
+
+static void remove_attrs(struct acpi_power_meter_resource *resource)
+{
+ int i;
+
+ for (i = 0; i < resource->num_sensors; i++) {
+ if (!resource->sensors[i].dev_attr.attr.name)
+ continue;
+ device_remove_file(&resource->acpi_dev->dev,
+ &resource->sensors[i].dev_attr);
+ }
+
+ remove_domain_devices(resource);
+
+ resource->num_sensors = 0;
+}
+
+static int setup_attrs(struct acpi_power_meter_resource *resource)
+{
+ int res = 0;
+
+ res = read_domain_devices(resource);
+ if (res)
+ return res;
+
+ if (resource->caps.flags & POWER_METER_CAN_MEASURE) {
+ res = register_ro_attrs(resource, meter_ro_attrs);
+ if (res)
+ goto error;
+ res = register_rw_attrs(resource, meter_rw_attrs);
+ if (res)
+ goto error;
+ }
+
+ if (resource->caps.flags & POWER_METER_CAN_CAP) {
+ if (!can_cap_in_hardware()) {
+ dev_err(&resource->acpi_dev->dev,
+ "Ignoring unsafe software power cap!\n");
+ goto skip_unsafe_cap;
+ }
+
+ if (resource->caps.configurable_cap) {
+ res = register_rw_attrs(resource, rw_cap_attrs);
+ if (res)
+ goto error;
+ } else {
+ res = register_ro_attrs(resource, ro_cap_attrs);
+ if (res)
+ goto error;
+ }
+ res = register_ro_attrs(resource, misc_cap_attrs);
+ if (res)
+ goto error;
+ }
+skip_unsafe_cap:
+
+ if (resource->caps.flags & POWER_METER_CAN_TRIP) {
+ res = register_rw_attrs(resource, trip_attrs);
+ if (res)
+ goto error;
+ }
+
+ res = register_ro_attrs(resource, misc_attrs);
+ if (res)
+ goto error;
+
+ return res;
+error:
+ remove_domain_devices(resource);
+ remove_attrs(resource);
+ return res;
+}
+
+static void free_capabilities(struct acpi_power_meter_resource *resource)
+{
+ acpi_string *str;
+ int i;
+
+ str = &resource->model_number;
+ for (i = 0; i < 3; i++, str++)
+ kfree(*str);
+}
+
+static int read_capabilities(struct acpi_power_meter_resource *resource)
+{
+ int res = 0;
+ int i;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_buffer state = { 0, NULL };
+ struct acpi_buffer format = { sizeof("NNNNNNNNNNN"), "NNNNNNNNNNN" };
+ union acpi_object *pss;
+ acpi_string *str;
+ acpi_status status;
+
+ status = acpi_evaluate_object(resource->acpi_dev->handle, "_PMC", NULL,
+ &buffer);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PMC"));
+ return -ENODEV;
+ }
+
+ pss = buffer.pointer;
+ if (!pss ||
+ pss->type != ACPI_TYPE_PACKAGE ||
+ pss->package.count != 14) {
+ dev_err(&resource->acpi_dev->dev, ACPI_POWER_METER_NAME
+ "Invalid _PMC data\n");
+ res = -EFAULT;
+ goto end;
+ }
+
+ /* Grab all the integer data at once */
+ state.length = sizeof(struct acpi_power_meter_capabilities);
+ state.pointer = &resource->caps;
+
+ status = acpi_extract_package(pss, &format, &state);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Invalid data"));
+ res = -EFAULT;
+ goto end;
+ }
+
+ if (resource->caps.units) {
+ dev_err(&resource->acpi_dev->dev, ACPI_POWER_METER_NAME
+ "Unknown units %llu.\n",
+ resource->caps.units);
+ res = -EINVAL;
+ goto end;
+ }
+
+ /* Grab the string data */
+ str = &resource->model_number;
+
+ for (i = 11; i < 14; i++) {
+ union acpi_object *element = &(pss->package.elements[i]);
+
+ if (element->type != ACPI_TYPE_STRING) {
+ res = -EINVAL;
+ goto error;
+ }
+
+ *str = kzalloc(sizeof(u8) * (element->string.length + 1),
+ GFP_KERNEL);
+ if (!*str) {
+ res = -ENOMEM;
+ goto error;
+ }
+
+ strncpy(*str, element->string.pointer, element->string.length);
+ str++;
+ }
+
+ dev_info(&resource->acpi_dev->dev, "Found ACPI power meter.\n");
+ goto end;
+error:
+ str = &resource->model_number;
+ for (i = 0; i < 3; i++, str++)
+ kfree(*str);
+end:
+ kfree(buffer.pointer);
+ return res;
+}
+
+/* Handle ACPI event notifications */
+static void acpi_power_meter_notify(struct acpi_device *device, u32 event)
+{
+ struct acpi_power_meter_resource *resource;
+ int res;
+
+ if (!device || !acpi_driver_data(device))
+ return;
+
+ resource = acpi_driver_data(device);
+
+ mutex_lock(&resource->lock);
+ switch (event) {
+ case METER_NOTIFY_CONFIG:
+ free_capabilities(resource);
+ res = read_capabilities(resource);
+ if (res)
+ break;
+
+ remove_attrs(resource);
+ setup_attrs(resource);
+ break;
+ case METER_NOTIFY_TRIP:
+ sysfs_notify(&device->dev.kobj, NULL, POWER_AVERAGE_NAME);
+ update_meter(resource);
+ break;
+ case METER_NOTIFY_CAP:
+ sysfs_notify(&device->dev.kobj, NULL, POWER_CAP_NAME);
+ update_cap(resource);
+ break;
+ case METER_NOTIFY_INTERVAL:
+ sysfs_notify(&device->dev.kobj, NULL, POWER_AVG_INTERVAL_NAME);
+ update_avg_interval(resource);
+ break;
+ case METER_NOTIFY_CAPPING:
+ sysfs_notify(&device->dev.kobj, NULL, POWER_ALARM_NAME);
+ dev_info(&device->dev, "Capping in progress.\n");
+ break;
+ default:
+ BUG();
+ }
+ mutex_unlock(&resource->lock);
+
+ acpi_bus_generate_netlink_event(ACPI_POWER_METER_CLASS,
+ dev_name(&device->dev), event, 0);
+}
+
+static int acpi_power_meter_add(struct acpi_device *device)
+{
+ int res;
+ struct acpi_power_meter_resource *resource;
+
+ if (!device)
+ return -EINVAL;
+
+ resource = kzalloc(sizeof(struct acpi_power_meter_resource),
+ GFP_KERNEL);
+ if (!resource)
+ return -ENOMEM;
+
+ resource->sensors_valid = 0;
+ resource->acpi_dev = device;
+ mutex_init(&resource->lock);
+ strcpy(acpi_device_name(device), ACPI_POWER_METER_DEVICE_NAME);
+ strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS);
+ device->driver_data = resource;
+
+ free_capabilities(resource);
+ res = read_capabilities(resource);
+ if (res)
+ goto exit_free;
+
+ resource->trip[0] = resource->trip[1] = -1;
+
+ res = setup_attrs(resource);
+ if (res)
+ goto exit_free;
+
+ resource->hwmon_dev = hwmon_device_register(&device->dev);
+ if (IS_ERR(resource->hwmon_dev)) {
+ res = PTR_ERR(resource->hwmon_dev);
+ goto exit_remove;
+ }
+
+ res = 0;
+ goto exit;
+
+exit_remove:
+ remove_attrs(resource);
+exit_free:
+ kfree(resource);
+exit:
+ return res;
+}
+
+static int acpi_power_meter_remove(struct acpi_device *device, int type)
+{
+ struct acpi_power_meter_resource *resource;
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ resource = acpi_driver_data(device);
+ hwmon_device_unregister(resource->hwmon_dev);
+
+ free_capabilities(resource);
+ remove_attrs(resource);
+
+ kfree(resource);
+ return 0;
+}
+
+static int acpi_power_meter_resume(struct acpi_device *device)
+{
+ struct acpi_power_meter_resource *resource;
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ resource = acpi_driver_data(device);
+ free_capabilities(resource);
+ read_capabilities(resource);
+
+ return 0;
+}
+
+static struct acpi_driver acpi_power_meter_driver = {
+ .name = "power_meter",
+ .class = ACPI_POWER_METER_CLASS,
+ .ids = power_meter_ids,
+ .ops = {
+ .add = acpi_power_meter_add,
+ .remove = acpi_power_meter_remove,
+ .resume = acpi_power_meter_resume,
+ .notify = acpi_power_meter_notify,
+ },
+};
+
+/* Module init/exit routines */
+static int __init enable_cap_knobs(const struct dmi_system_id *d)
+{
+ cap_in_hardware = 1;
+ return 0;
+}
+
+static struct dmi_system_id __initdata pm_dmi_table[] = {
+ {
+ enable_cap_knobs, "IBM Active Energy Manager",
+ {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM")
+ },
+ },
+ {}
+};
+
+static int __init acpi_power_meter_init(void)
+{
+ int result;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ dmi_check_system(pm_dmi_table);
+
+ result = acpi_bus_register_driver(&acpi_power_meter_driver);
+ if (result < 0)
+ return -ENODEV;
+
+ return 0;
+}
+
+static void __exit acpi_power_meter_exit(void)
+{
+ acpi_bus_unregister_driver(&acpi_power_meter_driver);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("ACPI 4.0 power meter driver");
+MODULE_LICENSE("GPL");
+
+module_param(force_cap_on, bool, 0644);
+MODULE_PARM_DESC(force_cap_on, "Enable power cap even it is unsafe to do so.");
+
+module_init(acpi_power_meter_init);
+module_exit(acpi_power_meter_exit);
#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
+#define PREFIX "ACPI: "
+
#define ACPI_PROCESSOR_CLASS "processor"
#define ACPI_PROCESSOR_DEVICE_NAME "Processor"
#define ACPI_PROCESSOR_FILE_INFO "info"
MODULE_LICENSE("GPL");
static int acpi_processor_add(struct acpi_device *device);
-static int acpi_processor_start(struct acpi_device *device);
static int acpi_processor_remove(struct acpi_device *device, int type);
+#ifdef CONFIG_ACPI_PROCFS
static int acpi_processor_info_open_fs(struct inode *inode, struct file *file);
+#endif
static void acpi_processor_notify(struct acpi_device *device, u32 event);
static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
static int acpi_processor_handle_eject(struct acpi_processor *pr);
.ops = {
.add = acpi_processor_add,
.remove = acpi_processor_remove,
- .start = acpi_processor_start,
.suspend = acpi_processor_suspend,
.resume = acpi_processor_resume,
.notify = acpi_processor_notify,
#define INSTALL_NOTIFY_HANDLER 1
#define UNINSTALL_NOTIFY_HANDLER 2
-
+#ifdef CONFIG_ACPI_PROCFS
static const struct file_operations acpi_processor_info_fops = {
.owner = THIS_MODULE,
.open = acpi_processor_info_open_fs,
.llseek = seq_lseek,
.release = single_release,
};
+#endif
DEFINE_PER_CPU(struct acpi_processor *, processors);
struct acpi_processor_errata errata __read_mostly;
FS Interface (/proc)
-------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_PROCFS
static struct proc_dir_entry *acpi_processor_dir = NULL;
static int acpi_processor_info_seq_show(struct seq_file *seq, void *offset)
return -EIO;
return 0;
}
-
static int acpi_processor_remove_fs(struct acpi_device *device)
{
return 0;
}
+#else
+static inline int acpi_processor_add_fs(struct acpi_device *device)
+{
+ return 0;
+}
+static inline int acpi_processor_remove_fs(struct acpi_device *device)
+{
+ return 0;
+}
+#endif
/* Use the acpiid in MADT to map cpus in case of SMP */
static DEFINE_PER_CPU(void *, processor_device_array);
-static int __cpuinit acpi_processor_start(struct acpi_device *device)
-{
- int result = 0;
- struct acpi_processor *pr;
- struct sys_device *sysdev;
-
- pr = acpi_driver_data(device);
-
- result = acpi_processor_get_info(device);
- if (result) {
- /* Processor is physically not present */
- return 0;
- }
-
- BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
-
- /*
- * Buggy BIOS check
- * ACPI id of processors can be reported wrongly by the BIOS.
- * Don't trust it blindly
- */
- if (per_cpu(processor_device_array, pr->id) != NULL &&
- per_cpu(processor_device_array, pr->id) != device) {
- printk(KERN_WARNING "BIOS reported wrong ACPI id "
- "for the processor\n");
- return -ENODEV;
- }
- per_cpu(processor_device_array, pr->id) = device;
-
- per_cpu(processors, pr->id) = pr;
-
- result = acpi_processor_add_fs(device);
- if (result)
- goto end;
-
- sysdev = get_cpu_sysdev(pr->id);
- if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev"))
- return -EFAULT;
-
- /* _PDC call should be done before doing anything else (if reqd.). */
- arch_acpi_processor_init_pdc(pr);
- acpi_processor_set_pdc(pr);
- arch_acpi_processor_cleanup_pdc(pr);
-
-#ifdef CONFIG_CPU_FREQ
- acpi_processor_ppc_has_changed(pr);
-#endif
- acpi_processor_get_throttling_info(pr);
- acpi_processor_get_limit_info(pr);
-
-
- acpi_processor_power_init(pr, device);
-
- pr->cdev = thermal_cooling_device_register("Processor", device,
- &processor_cooling_ops);
- if (IS_ERR(pr->cdev)) {
- result = PTR_ERR(pr->cdev);
- goto end;
- }
-
- dev_info(&device->dev, "registered as cooling_device%d\n",
- pr->cdev->id);
-
- result = sysfs_create_link(&device->dev.kobj,
- &pr->cdev->device.kobj,
- "thermal_cooling");
- if (result)
- printk(KERN_ERR PREFIX "Create sysfs link\n");
- result = sysfs_create_link(&pr->cdev->device.kobj,
- &device->dev.kobj,
- "device");
- if (result)
- printk(KERN_ERR PREFIX "Create sysfs link\n");
-
- if (pr->flags.throttling) {
- printk(KERN_INFO PREFIX "%s [%s] (supports",
- acpi_device_name(device), acpi_device_bid(device));
- printk(" %d throttling states", pr->throttling.state_count);
- printk(")\n");
- }
-
- end:
-
- return result;
-}
-
static void acpi_processor_notify(struct acpi_device *device, u32 event)
{
struct acpi_processor *pr = acpi_driver_data(device);
static int acpi_processor_add(struct acpi_device *device)
{
struct acpi_processor *pr = NULL;
-
-
- if (!device)
- return -EINVAL;
+ int result = 0;
+ struct sys_device *sysdev;
pr = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
if (!pr)
strcpy(acpi_device_class(device), ACPI_PROCESSOR_CLASS);
device->driver_data = pr;
+ result = acpi_processor_get_info(device);
+ if (result) {
+ /* Processor is physically not present */
+ return 0;
+ }
+
+ BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0));
+
+ /*
+ * Buggy BIOS check
+ * ACPI id of processors can be reported wrongly by the BIOS.
+ * Don't trust it blindly
+ */
+ if (per_cpu(processor_device_array, pr->id) != NULL &&
+ per_cpu(processor_device_array, pr->id) != device) {
+ printk(KERN_WARNING "BIOS reported wrong ACPI id "
+ "for the processor\n");
+ result = -ENODEV;
+ goto err_free_cpumask;
+ }
+ per_cpu(processor_device_array, pr->id) = device;
+
+ per_cpu(processors, pr->id) = pr;
+
+ result = acpi_processor_add_fs(device);
+ if (result)
+ goto err_free_cpumask;
+
+ sysdev = get_cpu_sysdev(pr->id);
+ if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) {
+ result = -EFAULT;
+ goto err_remove_fs;
+ }
+
+ /* _PDC call should be done before doing anything else (if reqd.). */
+ arch_acpi_processor_init_pdc(pr);
+ acpi_processor_set_pdc(pr);
+ arch_acpi_processor_cleanup_pdc(pr);
+
+#ifdef CONFIG_CPU_FREQ
+ acpi_processor_ppc_has_changed(pr);
+#endif
+ acpi_processor_get_throttling_info(pr);
+ acpi_processor_get_limit_info(pr);
+
+
+ acpi_processor_power_init(pr, device);
+
+ pr->cdev = thermal_cooling_device_register("Processor", device,
+ &processor_cooling_ops);
+ if (IS_ERR(pr->cdev)) {
+ result = PTR_ERR(pr->cdev);
+ goto err_power_exit;
+ }
+
+ dev_info(&device->dev, "registered as cooling_device%d\n",
+ pr->cdev->id);
+
+ result = sysfs_create_link(&device->dev.kobj,
+ &pr->cdev->device.kobj,
+ "thermal_cooling");
+ if (result) {
+ printk(KERN_ERR PREFIX "Create sysfs link\n");
+ goto err_thermal_unregister;
+ }
+ result = sysfs_create_link(&pr->cdev->device.kobj,
+ &device->dev.kobj,
+ "device");
+ if (result) {
+ printk(KERN_ERR PREFIX "Create sysfs link\n");
+ goto err_remove_sysfs;
+ }
+
+ if (pr->flags.throttling) {
+ printk(KERN_INFO PREFIX "%s [%s] (supports",
+ acpi_device_name(device), acpi_device_bid(device));
+ printk(" %d throttling states", pr->throttling.state_count);
+ printk(")\n");
+ }
+
return 0;
+
+err_remove_sysfs:
+ sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
+err_thermal_unregister:
+ thermal_cooling_device_unregister(pr->cdev);
+err_power_exit:
+ acpi_processor_power_exit(pr, device);
+err_remove_fs:
+ acpi_processor_remove_fs(device);
+err_free_cpumask:
+ free_cpumask_var(pr->throttling.shared_cpu_map);
+
+ return result;
}
static int acpi_processor_remove(struct acpi_device *device, int type)
{
acpi_handle phandle;
struct acpi_device *pdev;
- struct acpi_processor *pr;
if (acpi_get_parent(handle, &phandle)) {
return -ENODEV;
}
- acpi_bus_start(*device);
-
- pr = acpi_driver_data(*device);
- if (!pr)
- return -ENODEV;
-
- if ((pr->id >= 0) && (pr->id < nr_cpu_ids)) {
- kobject_uevent(&(*device)->dev.kobj, KOBJ_ONLINE);
- }
return 0;
}
"Unable to add the device\n");
break;
}
-
- pr = acpi_driver_data(device);
- if (!pr) {
- printk(KERN_ERR PREFIX "Driver data is NULL\n");
- break;
- }
-
- if (pr->id >= 0 && (pr->id < nr_cpu_ids)) {
- kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
- break;
- }
-
- result = acpi_processor_start(device);
- if ((!result) && ((pr->id >= 0) && (pr->id < nr_cpu_ids))) {
- kobject_uevent(&device->dev.kobj, KOBJ_ONLINE);
- } else {
- printk(KERN_ERR PREFIX "Device [%s] failed to start\n",
- acpi_device_bid(device));
- }
break;
case ACPI_NOTIFY_EJECT_REQUEST:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Driver data is NULL, dropping EJECT\n");
return;
}
-
- if ((pr->id < nr_cpu_ids) && (cpu_present(pr->id)))
- kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
(struct acpi_table_header **)&madt)))
madt = NULL;
#endif
-
+#ifdef CONFIG_ACPI_PROCFS
acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
if (!acpi_processor_dir)
return -ENOMEM;
-
+#endif
/*
* Check whether the system is DMI table. If yes, OSPM
* should not use mwait for CPU-states.
cpuidle_unregister_driver(&acpi_idle_driver);
out_proc:
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
return result;
}
cpuidle_unregister_driver(&acpi_idle_driver);
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir);
+#endif
return;
}
#include <acpi/processor.h>
#include <asm/processor.h>
+#define PREFIX "ACPI: "
+
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_idle");
return 0;
}
+#ifdef CONFIG_ACPI_PROCFS
static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_processor *pr = seq->private;
.llseek = seq_lseek,
.release = single_release,
};
-
+#endif
/**
* acpi_idle_bm_check - checks if bus master activity was detected
{
acpi_status status = 0;
static int first_run;
+#ifdef CONFIG_ACPI_PROCFS
struct proc_dir_entry *entry = NULL;
+#endif
unsigned int i;
if (boot_option_idle_override)
pr->power.states[i].type);
printk(")\n");
}
-
+#ifdef CONFIG_ACPI_PROCFS
/* 'power' [R] */
entry = proc_create_data(ACPI_PROCESSOR_FILE_POWER,
S_IRUGO, acpi_device_dir(device),
acpi_driver_data(device));
if (!entry)
return -EIO;
+#endif
return 0;
}
cpuidle_unregister_device(&pr->power.dev);
pr->flags.power_setup_done = 0;
+#ifdef CONFIG_ACPI_PROCFS
if (acpi_device_dir(device))
remove_proc_entry(ACPI_PROCESSOR_FILE_POWER,
acpi_device_dir(device));
+#endif
return 0;
}
#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
+#define PREFIX "ACPI: "
+
#define ACPI_PROCESSOR_CLASS "processor"
#define ACPI_PROCESSOR_FILE_PERFORMANCE "performance"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
#include <acpi/processor.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_thermal");
};
/* /proc interface */
-
+#ifdef CONFIG_ACPI_PROCFS
static int acpi_processor_limit_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_processor *pr = (struct acpi_processor *)seq->private;
.llseek = seq_lseek,
.release = single_release,
};
+#endif
#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
+#define PREFIX "ACPI: "
+
#define ACPI_PROCESSOR_CLASS "processor"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_throttling");
}
/* proc interface */
-
+#ifdef CONFIG_ACPI_PROCFS
static int acpi_processor_throttling_seq_show(struct seq_file *seq,
void *offset)
{
.llseek = seq_lseek,
.release = single_release,
};
+#endif
#include "sbshc.h"
+#define PREFIX "ACPI: "
+
#define ACPI_SBS_CLASS "sbs"
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_BATTERY_CLASS "battery"
#include <linux/interrupt.h>
#include "sbshc.h"
+#define PREFIX "ACPI: "
+
#define ACPI_SMB_HC_CLASS "smbus_host_controller"
#define ACPI_SMB_HC_DEVICE_NAME "ACPI SMBus HC"
}
if (acpi_dev->flags.compatible_ids) {
- struct acpi_compatible_id_list *cid_list;
+ struct acpica_device_id_list *cid_list;
int i;
cid_list = acpi_dev->pnp.cid_list;
for (i = 0; i < cid_list->count; i++) {
count = snprintf(&modalias[len], size, "%s:",
- cid_list->id[i].value);
+ cid_list->ids[i].string);
if (count < 0 || count >= size) {
printk(KERN_ERR PREFIX "%s cid[%i] exceeds event buffer size",
acpi_dev->pnp.device_name, i);
}
if (device->flags.compatible_ids) {
- struct acpi_compatible_id_list *cid_list = device->pnp.cid_list;
+ struct acpica_device_id_list *cid_list = device->pnp.cid_list;
int i;
for (id = ids; id->id[0]; id++) {
/* compare multiple _CID entries against driver ids */
for (i = 0; i < cid_list->count; i++) {
if (!strcmp((char*)id->id,
- cid_list->id[i].value))
+ cid_list->ids[i].string))
return 0;
}
}
struct acpi_device *acpi_dev = to_acpi_device(dev);
kfree(acpi_dev->pnp.cid_list);
+ if (acpi_dev->flags.hardware_id)
+ kfree(acpi_dev->pnp.hardware_id);
+ if (acpi_dev->flags.unique_id)
+ kfree(acpi_dev->pnp.unique_id);
kfree(acpi_dev);
}
{
struct acpi_device *device = data;
- acpi_device_notify(device->handle, ACPI_FIXED_HARDWARE_EVENT, device);
+ /* Fixed hardware devices have no handles */
+ acpi_device_notify(NULL, ACPI_FIXED_HARDWARE_EVENT, device);
return AE_OK;
}
if (acpi_drv->ops.notify) {
ret = acpi_device_install_notify_handler(acpi_dev);
if (ret) {
- if (acpi_drv->ops.stop)
- acpi_drv->ops.stop(acpi_dev,
- acpi_dev->removal_type);
if (acpi_drv->ops.remove)
acpi_drv->ops.remove(acpi_dev,
acpi_dev->removal_type);
if (acpi_drv) {
if (acpi_drv->ops.notify)
acpi_device_remove_notify_handler(acpi_dev);
- if (acpi_drv->ops.stop)
- acpi_drv->ops.stop(acpi_dev, acpi_dev->removal_type);
if (acpi_drv->ops.remove)
acpi_drv->ops.remove(acpi_dev, acpi_dev->removal_type);
}
}
EXPORT_SYMBOL_GPL(acpi_bus_get_ejd);
-void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context)
+void acpi_bus_data_handler(acpi_handle handle, void *context)
{
/* TBD */
return acpi_get_handle(device->handle, "_DCK", &tmp);
}
+static struct acpica_device_id_list*
+acpi_add_cid(
+ struct acpi_device_info *info,
+ struct acpica_device_id *new_cid)
+{
+ struct acpica_device_id_list *cid;
+ char *next_id_string;
+ acpi_size cid_length;
+ acpi_size new_cid_length;
+ u32 i;
+
+
+ /* Allocate new CID list with room for the new CID */
+
+ if (!new_cid)
+ new_cid_length = info->compatible_id_list.list_size;
+ else if (info->compatible_id_list.list_size)
+ new_cid_length = info->compatible_id_list.list_size +
+ new_cid->length + sizeof(struct acpica_device_id);
+ else
+ new_cid_length = sizeof(struct acpica_device_id_list) + new_cid->length;
+
+ cid = ACPI_ALLOCATE_ZEROED(new_cid_length);
+ if (!cid) {
+ return NULL;
+ }
+
+ cid->list_size = new_cid_length;
+ cid->count = info->compatible_id_list.count;
+ if (new_cid)
+ cid->count++;
+ next_id_string = (char *) cid->ids + (cid->count * sizeof(struct acpica_device_id));
+
+ /* Copy all existing CIDs */
+
+ for (i = 0; i < info->compatible_id_list.count; i++) {
+ cid_length = info->compatible_id_list.ids[i].length;
+ cid->ids[i].string = next_id_string;
+ cid->ids[i].length = cid_length;
+
+ ACPI_MEMCPY(next_id_string, info->compatible_id_list.ids[i].string,
+ cid_length);
+
+ next_id_string += cid_length;
+ }
+
+ /* Append the new CID */
+
+ if (new_cid) {
+ cid->ids[i].string = next_id_string;
+ cid->ids[i].length = new_cid->length;
+
+ ACPI_MEMCPY(next_id_string, new_cid->string, new_cid->length);
+ }
+
+ return cid;
+}
+
static void acpi_device_set_id(struct acpi_device *device,
struct acpi_device *parent, acpi_handle handle,
int type)
{
- struct acpi_device_info *info;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_device_info *info = NULL;
char *hid = NULL;
char *uid = NULL;
- struct acpi_compatible_id_list *cid_list = NULL;
- const char *cid_add = NULL;
+ struct acpica_device_id_list *cid_list = NULL;
+ char *cid_add = NULL;
acpi_status status;
switch (type) {
case ACPI_BUS_TYPE_DEVICE:
- status = acpi_get_object_info(handle, &buffer);
+ status = acpi_get_object_info(handle, &info);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX "%s: Error reading device info\n", __func__);
return;
}
- info = buffer.pointer;
if (info->valid & ACPI_VALID_HID)
- hid = info->hardware_id.value;
+ hid = info->hardware_id.string;
if (info->valid & ACPI_VALID_UID)
- uid = info->unique_id.value;
+ uid = info->unique_id.string;
if (info->valid & ACPI_VALID_CID)
- cid_list = &info->compatibility_id;
+ cid_list = &info->compatible_id_list;
if (info->valid & ACPI_VALID_ADR) {
device->pnp.bus_address = info->address;
device->flags.bus_address = 1;
}
if (hid) {
- strcpy(device->pnp.hardware_id, hid);
- device->flags.hardware_id = 1;
+ device->pnp.hardware_id = ACPI_ALLOCATE_ZEROED(strlen (hid) + 1);
+ if (device->pnp.hardware_id) {
+ strcpy(device->pnp.hardware_id, hid);
+ device->flags.hardware_id = 1;
+ }
}
+ if (!device->flags.hardware_id)
+ device->pnp.hardware_id = "";
+
if (uid) {
- strcpy(device->pnp.unique_id, uid);
- device->flags.unique_id = 1;
+ device->pnp.unique_id = ACPI_ALLOCATE_ZEROED(strlen (uid) + 1);
+ if (device->pnp.unique_id) {
+ strcpy(device->pnp.unique_id, uid);
+ device->flags.unique_id = 1;
+ }
}
+ if (!device->flags.unique_id)
+ device->pnp.unique_id = "";
+
if (cid_list || cid_add) {
- struct acpi_compatible_id_list *list;
- int size = 0;
- int count = 0;
-
- if (cid_list) {
- size = cid_list->size;
- } else if (cid_add) {
- size = sizeof(struct acpi_compatible_id_list);
- cid_list = ACPI_ALLOCATE_ZEROED((acpi_size) size);
- if (!cid_list) {
- printk(KERN_ERR "Memory allocation error\n");
- kfree(buffer.pointer);
- return;
- } else {
- cid_list->count = 0;
- cid_list->size = size;
- }
+ struct acpica_device_id_list *list;
+
+ if (cid_add) {
+ struct acpica_device_id cid;
+ cid.length = strlen (cid_add) + 1;
+ cid.string = cid_add;
+
+ list = acpi_add_cid(info, &cid);
+ } else {
+ list = acpi_add_cid(info, NULL);
}
- if (cid_add)
- size += sizeof(struct acpi_compatible_id);
- list = kmalloc(size, GFP_KERNEL);
if (list) {
- if (cid_list) {
- memcpy(list, cid_list, cid_list->size);
- count = cid_list->count;
- }
- if (cid_add) {
- strncpy(list->id[count].value, cid_add,
- ACPI_MAX_CID_LENGTH);
- count++;
- device->flags.compatible_ids = 1;
- }
- list->size = size;
- list->count = count;
device->pnp.cid_list = list;
- } else
- printk(KERN_ERR PREFIX "Memory allocation error\n");
+ if (cid_add)
+ device->flags.compatible_ids = 1;
+ }
}
- kfree(buffer.pointer);
+ kfree(info);
}
static int acpi_device_set_context(struct acpi_device *device, int type)
acpi_device_set_id(device, parent, handle, type);
/*
- * The ACPI device is attached to acpi handle before getting
- * the power/wakeup/peformance flags. Otherwise OS can't get
- * the corresponding ACPI device by the acpi handle in the course
- * of getting the power/wakeup/performance flags.
- */
- result = acpi_device_set_context(device, type);
- if (result)
- goto end;
-
- /*
* Power Management
* ----------------
*/
goto end;
}
+ if ((result = acpi_device_set_context(device, type)))
+ goto end;
result = acpi_device_register(device, parent);
end:
if (!result)
*child = device;
- else {
- kfree(device->pnp.cid_list);
- kfree(device);
- }
+ else
+ acpi_device_release(&device->dev);
return result;
}
},
},
{
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Hewlett-Packard HP Pavilion dv3 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv3 Notebook PC"),
+ },
+ },
+ {
.callback = init_old_suspend_ordering,
.ident = "Panasonic CF51-2L",
.matches = {
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define _COMPONENT ACPI_SYSTEM_COMPONENT
ACPI_MODULE_NAME("system");
unsigned long table_end;
acpi_size tbl_size;
+ if (acpi_disabled)
+ return -ENODEV;
+
if (!handler)
return -EINVAL;
struct acpi_table_header *table = NULL;
acpi_size tbl_size;
+ if (acpi_disabled)
+ return -ENODEV;
+
if (!handler)
return -EINVAL;
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define ACPI_THERMAL_CLASS "thermal_zone"
#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
#define ACPI_THERMAL_FILE_STATE "state"
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#include "internal.h"
+
#define _COMPONENT ACPI_BUS_COMPONENT
ACPI_MODULE_NAME("utils");
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <asm/uaccess.h>
-
+#include <linux/dmi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#define PREFIX "ACPI: "
+
#define ACPI_VIDEO_CLASS "video"
#define ACPI_VIDEO_BUS_NAME "Video Bus"
#define ACPI_VIDEO_DEVICE_NAME "Video Device"
struct acpi_device *dev;
struct acpi_video_device_brightness *brightness;
struct backlight_device *backlight;
- struct thermal_cooling_device *cdev;
+ struct thermal_cooling_device *cooling_dev;
struct output_device *output_dev;
};
/* thermal cooling device callbacks */
-static int video_get_max_state(struct thermal_cooling_device *cdev, unsigned
+static int video_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned
long *state)
{
- struct acpi_device *device = cdev->devdata;
+ struct acpi_device *device = cooling_dev->devdata;
struct acpi_video_device *video = acpi_driver_data(device);
*state = video->brightness->count - 3;
return 0;
}
-static int video_get_cur_state(struct thermal_cooling_device *cdev, unsigned
+static int video_get_cur_state(struct thermal_cooling_device *cooling_dev, unsigned
long *state)
{
- struct acpi_device *device = cdev->devdata;
+ struct acpi_device *device = cooling_dev->devdata;
struct acpi_video_device *video = acpi_driver_data(device);
unsigned long long level;
int offset;
}
static int
-video_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
+video_set_cur_state(struct thermal_cooling_device *cooling_dev, unsigned long state)
{
- struct acpi_device *device = cdev->devdata;
+ struct acpi_device *device = cooling_dev->devdata;
struct acpi_video_device *video = acpi_driver_data(device);
int level;
unsigned long long *level)
{
acpi_status status = AE_OK;
+ int i;
if (device->cap._BQC || device->cap._BCQ) {
char *buf = device->cap._BQC ? "_BQC" : "_BCQ";
}
*level += bqc_offset_aml_bug_workaround;
- device->brightness->curr = *level;
- return 0;
+ for (i = 2; i < device->brightness->count; i++)
+ if (device->brightness->levels[i] == *level) {
+ device->brightness->curr = *level;
+ return 0;
+ }
+ /* BQC returned an invalid level. Stop using it. */
+ ACPI_WARNING((AE_INFO, "%s returned an invalid level",
+ buf));
+ device->cap._BQC = device->cap._BCQ = 0;
} else {
/* Fixme:
* should we return an error or ignore this failure?
br->flags._BCM_use_index = br->flags._BCL_use_index;
/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
- br->curr = level_old = max_level;
+ br->curr = level = max_level;
if (!device->cap._BQC)
goto set_level;
br->flags._BQC_use_index = (level == max_level ? 0 : 1);
- if (!br->flags._BQC_use_index)
+ if (!br->flags._BQC_use_index) {
+ /*
+ * Set the backlight to the initial state.
+ * On some buggy laptops, _BQC returns an uninitialized value
+ * when invoked for the first time, i.e. level_old is invalid.
+ * set the backlight to max_level in this case
+ */
+ for (i = 2; i < br->count; i++)
+ if (level_old == br->levels[i])
+ level = level_old;
goto set_level;
+ }
if (br->flags._BCL_reversed)
level_old = (br->count - 1) - level_old;
- level_old = br->levels[level_old];
+ level = br->levels[level_old];
set_level:
- result = acpi_video_device_lcd_set_level(device, level_old);
+ result = acpi_video_device_lcd_set_level(device, level);
if (result)
goto out_free_levels;
{
acpi_handle h_dummy1;
-
- memset(&device->cap, 0, sizeof(device->cap));
-
if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_ADR", &h_dummy1))) {
device->cap._ADR = 1;
}
if (result)
printk(KERN_ERR PREFIX "Create sysfs link\n");
- device->cdev = thermal_cooling_device_register("LCD",
+ device->cooling_dev = thermal_cooling_device_register("LCD",
device->dev, &video_cooling_ops);
- if (IS_ERR(device->cdev))
+ if (IS_ERR(device->cooling_dev)) {
+ /*
+ * Set cooling_dev to NULL so we don't crash trying to
+ * free it.
+ * Also, why the hell we are returning early and
+ * not attempt to register video output if cooling
+ * device registration failed?
+ * -- dtor
+ */
+ device->cooling_dev = NULL;
return;
+ }
dev_info(&device->dev->dev, "registered as cooling_device%d\n",
- device->cdev->id);
+ device->cooling_dev->id);
result = sysfs_create_link(&device->dev->dev.kobj,
- &device->cdev->device.kobj,
+ &device->cooling_dev->device.kobj,
"thermal_cooling");
if (result)
printk(KERN_ERR PREFIX "Create sysfs link\n");
- result = sysfs_create_link(&device->cdev->device.kobj,
+ result = sysfs_create_link(&device->cooling_dev->device.kobj,
&device->dev->dev.kobj, "device");
if (result)
printk(KERN_ERR PREFIX "Create sysfs link\n");
{
acpi_handle h_dummy1;
- memset(&video->cap, 0, sizeof(video->cap));
if (ACPI_SUCCESS(acpi_get_handle(video->device->handle, "_DOS", &h_dummy1))) {
video->cap._DOS = 1;
}
backlight_device_unregister(device->backlight);
device->backlight = NULL;
}
- if (device->cdev) {
+ if (device->cooling_dev) {
sysfs_remove_link(&device->dev->dev.kobj,
"thermal_cooling");
- sysfs_remove_link(&device->cdev->device.kobj,
+ sysfs_remove_link(&device->cooling_dev->device.kobj,
"device");
- thermal_cooling_device_unregister(device->cdev);
- device->cdev = NULL;
+ thermal_cooling_device_unregister(device->cooling_dev);
+ device->cooling_dev = NULL;
}
video_output_unregister(device->output_dev);
#include <linux/dmi.h>
#include <linux/pci.h>
+#define PREFIX "ACPI: "
+
ACPI_MODULE_NAME("video");
#define _COMPONENT ACPI_VIDEO_COMPONENT
{
acpi_handle handle, parent;
acpi_status status;
- struct acpi_buffer buffer;
struct acpi_device_info *info;
u64 lba_hpa, sba_hpa, length;
int match;
/* Look for an enclosing IOC scope and find its CSR space */
handle = obj;
do {
- buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
- status = acpi_get_object_info(handle, &buffer);
+ status = acpi_get_object_info(handle, &info);
if (ACPI_SUCCESS(status)) {
/* TBD check _CID also */
- info = buffer.pointer;
- info->hardware_id.value[sizeof(info->hardware_id)-1] = '\0';
- match = (strcmp(info->hardware_id.value, "HWP0001") == 0);
+ info->hardware_id.string[sizeof(info->hardware_id.length)-1] = '\0';
+ match = (strcmp(info->hardware_id.string, "HWP0001") == 0);
kfree(info);
if (match) {
status = hp_acpi_csr_space(handle, &sba_hpa, &length);
unsigned int bus, devnum, func;
acpi_integer addr;
acpi_handle dev_handle;
- struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER,
- .pointer = NULL};
acpi_status status;
struct acpi_device_info *dinfo = NULL;
int ret = -ENODEV;
goto err;
}
- status = acpi_get_object_info(dev_handle, &buffer);
+ status = acpi_get_object_info(dev_handle, &dinfo);
if (ACPI_FAILURE(status)) {
DEBPRINT("get_object_info for device failed\n");
goto err;
}
- dinfo = buffer.pointer;
if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
dinfo->address == addr) {
*pcidevfn = addr;
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/tboot.h>
+#include <linux/dmi.h>
-#undef PREFIX
-#define PREFIX "DMAR:"
+#define PREFIX "DMAR: "
/* No locks are needed as DMA remapping hardware unit
* list is constructed at boot time and hotplug of
acpi_handle *phandle = (acpi_handle *)context;
acpi_status status;
struct acpi_device_info *info;
- struct acpi_buffer info_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
int retval = 0;
- status = acpi_get_object_info(handle, &info_buffer);
+ status = acpi_get_object_info(handle, &info);
if (ACPI_FAILURE(status)) {
err("%s: Failed to get device information status=0x%x\n",
__func__, status);
return retval;
}
- info = info_buffer.pointer;
- info->hardware_id.value[sizeof(info->hardware_id.value) - 1] = '\0';
+ info->hardware_id.string[sizeof(info->hardware_id.length) - 1] = '\0';
if (info->current_status && (info->valid & ACPI_VALID_HID) &&
- (!strcmp(info->hardware_id.value, IBM_HARDWARE_ID1) ||
- !strcmp(info->hardware_id.value, IBM_HARDWARE_ID2))) {
+ (!strcmp(info->hardware_id.string, IBM_HARDWARE_ID1) ||
+ !strcmp(info->hardware_id.string, IBM_HARDWARE_ID2))) {
dbg("found hardware: %s, handle: %p\n",
- info->hardware_id.value, handle);
+ info->hardware_id.string, handle);
*phandle = handle;
/* returning non-zero causes the search to stop
* and returns this value to the caller of
depends on ACPI
depends on INPUT
depends on BACKLIGHT_CLASS_DEVICE
+ depends on LEDS_CLASS || LEDS_CLASS=n
---help---
This is a driver for laptops built by Fujitsu:
NOTE: This driver is deprecated and will probably be removed soon,
use asus-laptop instead.
+config TOPSTAR_LAPTOP
+ tristate "Topstar Laptop Extras"
+ depends on ACPI
+ depends on INPUT
+ ---help---
+ This driver adds support for hotkeys found on Topstar laptops.
+
+ If you have a Topstar laptop, say Y or M here.
+
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on ACPI
obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
obj-$(CONFIG_ACPI_WMI) += wmi.o
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
+obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
*/
#undef START_IN_KERNEL_MODE
-#define DRV_VER "0.5.13"
+#define DRV_VER "0.5.17"
/*
* According to the Atom N270 datasheet,
static unsigned int verbose;
static unsigned int fanstate = ACERHDF_FAN_AUTO;
static char force_bios[16];
+static char force_product[16];
static unsigned int prev_interval;
struct thermal_zone_device *thz_dev;
struct thermal_cooling_device *cl_dev;
MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
module_param_string(force_bios, force_bios, 16, 0);
MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+module_param_string(force_product, force_product, 16, 0);
+MODULE_PARM_DESC(force_product, "Force BIOS product and omit BIOS check");
+
+/*
+ * cmd_off: to switch the fan completely off / to check if the fan is off
+ * cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then
+ * the fan speed depending on the temperature
+ */
+struct fancmd {
+ u8 cmd_off;
+ u8 cmd_auto;
+};
/* BIOS settings */
struct bios_settings_t {
const char *vendor;
+ const char *product;
const char *version;
unsigned char fanreg;
unsigned char tempreg;
- unsigned char fancmd[2]; /* fan off and auto commands */
+ struct fancmd cmd;
};
/* Register addresses and values for different BIOS versions */
static const struct bios_settings_t bios_tbl[] = {
- {"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
- {"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
- {"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
- {"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
- {"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
- {"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
- {"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
- {"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
- {"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
- {"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
- {"", "", 0, 0, {0, 0} }
+ /* AOA110 */
+ {"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+ {"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00} },
+ {"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+ /* AOA150 */
+ {"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} },
+ /* special BIOS / other */
+ {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+ {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} },
+ {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} },
+ {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+ {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} },
+ /* pewpew-terminator */
+ {"", "", "", 0, 0, {0, 0} }
};
static const struct bios_settings_t *bios_cfg __read_mostly;
-
static int acerhdf_get_temp(int *temp)
{
u8 read_temp;
static int acerhdf_get_fanstate(int *state)
{
u8 fan;
- bool tmp;
if (ec_read(bios_cfg->fanreg, &fan))
return -EINVAL;
- tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
- *state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+ if (fan != bios_cfg->cmd.cmd_off)
+ *state = ACERHDF_FAN_AUTO;
+ else
+ *state = ACERHDF_FAN_OFF;
return 0;
}
state = ACERHDF_FAN_AUTO;
}
- cmd = bios_cfg->fancmd[state];
+ cmd = (state == ACERHDF_FAN_OFF) ? bios_cfg->cmd.cmd_off
+ : bios_cfg->cmd.cmd_auto;
fanstate = state;
ec_write(bios_cfg->fanreg, cmd);
};
/* suspend / resume functionality */
-static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
+static int acerhdf_suspend(struct device *dev)
{
if (kernelmode)
acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
return 0;
}
-static int acerhdf_resume(struct platform_device *device)
-{
- if (verbose)
- pr_notice("resuming\n");
-
- return 0;
-}
-
static int __devinit acerhdf_probe(struct platform_device *device)
{
return 0;
return 0;
}
-struct platform_driver acerhdf_drv = {
+static struct dev_pm_ops acerhdf_pm_ops = {
+ .suspend = acerhdf_suspend,
+ .freeze = acerhdf_suspend,
+};
+
+static struct platform_driver acerhdf_driver = {
.driver = {
- .name = "acerhdf",
+ .name = "acerhdf",
.owner = THIS_MODULE,
+ .pm = &acerhdf_pm_ops,
},
.probe = acerhdf_probe,
.remove = acerhdf_remove,
- .suspend = acerhdf_suspend,
- .resume = acerhdf_resume,
};
{
char const *vendor, *version, *product;
int i;
+ unsigned long prod_len = 0;
/* get BIOS data */
vendor = dmi_get_system_info(DMI_SYS_VENDOR);
version = dmi_get_system_info(DMI_BIOS_VERSION);
product = dmi_get_system_info(DMI_PRODUCT_NAME);
+
pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
- if (!force_bios[0]) {
- if (strncmp(product, "AO", 2)) {
- pr_err("no Aspire One hardware found\n");
- return -EINVAL;
- }
- } else {
- pr_info("forcing BIOS version: %s\n", version);
+ if (force_bios[0]) {
version = force_bios;
+ pr_info("forcing BIOS version: %s\n", version);
+ kernelmode = 0;
+ }
+
+ if (force_product[0]) {
+ product = force_product;
+ pr_info("forcing BIOS product: %s\n", product);
kernelmode = 0;
}
+ prod_len = strlen(product);
+
if (verbose)
pr_info("BIOS info: %s %s, product: %s\n",
vendor, version, product);
/* search BIOS version and vendor in BIOS settings table */
for (i = 0; bios_tbl[i].version[0]; i++) {
- if (!strcmp(bios_tbl[i].vendor, vendor) &&
+ if (strlen(bios_tbl[i].product) >= prod_len &&
+ !strncmp(bios_tbl[i].product, product,
+ strlen(bios_tbl[i].product)) &&
+ !strcmp(bios_tbl[i].vendor, vendor) &&
!strcmp(bios_tbl[i].version, version)) {
bios_cfg = &bios_tbl[i];
break;
}
if (!bios_cfg) {
- pr_err("unknown (unsupported) BIOS version %s/%s, "
- "please report, aborting!\n", vendor, version);
+ pr_err("unknown (unsupported) BIOS version %s/%s/%s, "
+ "please report, aborting!\n", vendor, product, version);
return -EINVAL;
}
{
int err = 0;
- err = platform_driver_register(&acerhdf_drv);
+ err = platform_driver_register(&acerhdf_driver);
if (err)
return err;
return;
platform_device_del(acerhdf_dev);
- platform_driver_unregister(&acerhdf_drv);
+ platform_driver_unregister(&acerhdf_driver);
}
static int acerhdf_register_thermal(void)
* Flags for hotk status
* WL_ON and BT_ON are also used for wireless_status()
*/
-#define WL_ON 0x01 //internal Wifi
-#define BT_ON 0x02 //internal Bluetooth
-#define MLED_ON 0x04 //mail LED
-#define TLED_ON 0x08 //touchpad LED
-#define RLED_ON 0x10 //Record LED
-#define PLED_ON 0x20 //Phone LED
-#define GLED_ON 0x40 //Gaming LED
-#define LCD_ON 0x80 //LCD backlight
-#define GPS_ON 0x100 //GPS
+#define WL_ON 0x01 /* internal Wifi */
+#define BT_ON 0x02 /* internal Bluetooth */
+#define MLED_ON 0x04 /* mail LED */
+#define TLED_ON 0x08 /* touchpad LED */
+#define RLED_ON 0x10 /* Record LED */
+#define PLED_ON 0x20 /* Phone LED */
+#define GLED_ON 0x40 /* Gaming LED */
+#define LCD_ON 0x80 /* LCD backlight */
+#define GPS_ON 0x100 /* GPS */
+#define KEY_ON 0x200 /* Keyboard backlight */
#define ASUS_LOG ASUS_HOTK_FILE ": "
#define ASUS_ERR KERN_ERR ASUS_LOG
MODULE_DESCRIPTION(ASUS_HOTK_NAME);
MODULE_LICENSE("GPL");
-/* WAPF defines the behavior of the Fn+Fx wlan key
+/*
+ * WAPF defines the behavior of the Fn+Fx wlan key
* The significance of values is yet to be found, but
* most of the time:
* 0x0 will do nothing
/* LEDD */
ASUS_HANDLE(ledd_set, ASUS_HOTK_PREFIX "SLCM");
-/* Bluetooth and WLAN
+/*
+ * Bluetooth and WLAN
* WLED and BLED are not handled like other XLED, because in some dsdt
* they also control the WLAN/Bluetooth device.
*/
/* Display */
ASUS_HANDLE(display_set, ASUS_HOTK_PREFIX "SDSP");
-ASUS_HANDLE(display_get, "\\_SB.PCI0.P0P1.VGA.GETD", /* A6B, A6K A6R A7D F3JM L4R M6R A3G
- M6A M6V VX-1 V6J V6V W3Z */
- "\\_SB.PCI0.P0P2.VGA.GETD", /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V
- S5A M5A z33A W1Jc W2V G1 */
- "\\_SB.PCI0.P0P3.VGA.GETD", /* A6V A6Q */
- "\\_SB.PCI0.P0PA.VGA.GETD", /* A6T, A6M */
- "\\_SB.PCI0.PCI1.VGAC.NMAP", /* L3C */
- "\\_SB.PCI0.VGA.GETD", /* Z96F */
- "\\ACTD", /* A2D */
- "\\ADVG", /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */
- "\\DNXT", /* P30 */
- "\\INFB", /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */
- "\\SSTE"); /* A3F A6F A3N A3L M6N W3N W6A */
-
-ASUS_HANDLE(ls_switch, ASUS_HOTK_PREFIX "ALSC"); /* Z71A Z71V */
-ASUS_HANDLE(ls_level, ASUS_HOTK_PREFIX "ALSL"); /* Z71A Z71V */
+ASUS_HANDLE(display_get,
+ /* A6B, A6K A6R A7D F3JM L4R M6R A3G M6A M6V VX-1 V6J V6V W3Z */
+ "\\_SB.PCI0.P0P1.VGA.GETD",
+ /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V S5A M5A z33A W1Jc W2V G1 */
+ "\\_SB.PCI0.P0P2.VGA.GETD",
+ /* A6V A6Q */
+ "\\_SB.PCI0.P0P3.VGA.GETD",
+ /* A6T, A6M */
+ "\\_SB.PCI0.P0PA.VGA.GETD",
+ /* L3C */
+ "\\_SB.PCI0.PCI1.VGAC.NMAP",
+ /* Z96F */
+ "\\_SB.PCI0.VGA.GETD",
+ /* A2D */
+ "\\ACTD",
+ /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */
+ "\\ADVG",
+ /* P30 */
+ "\\DNXT",
+ /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */
+ "\\INFB",
+ /* A3F A6F A3N A3L M6N W3N W6A */
+ "\\SSTE");
+
+ASUS_HANDLE(ls_switch, ASUS_HOTK_PREFIX "ALSC"); /* Z71A Z71V */
+ASUS_HANDLE(ls_level, ASUS_HOTK_PREFIX "ALSL"); /* Z71A Z71V */
/* GPS */
/* R2H use different handle for GPS on/off */
ASUS_HANDLE(gps_off, ASUS_HOTK_PREFIX "SDOF"); /* R2H */
ASUS_HANDLE(gps_status, ASUS_HOTK_PREFIX "GPST");
+/* Keyboard light */
+ASUS_HANDLE(kled_set, ASUS_HOTK_PREFIX "SLKB");
+ASUS_HANDLE(kled_get, ASUS_HOTK_PREFIX "GLKB");
+
/*
* This is the main structure, we can use it to store anything interesting
* about the hotk device
*/
struct asus_hotk {
- char *name; //laptop name
- struct acpi_device *device; //the device we are in
- acpi_handle handle; //the handle of the hotk device
- char status; //status of the hotk, for LEDs, ...
- u32 ledd_status; //status of the LED display
- u8 light_level; //light sensor level
- u8 light_switch; //light sensor switch value
- u16 event_count[128]; //count for each event TODO make this better
+ char *name; /* laptop name */
+ struct acpi_device *device; /* the device we are in */
+ acpi_handle handle; /* the handle of the hotk device */
+ char status; /* status of the hotk, for LEDs, ... */
+ u32 ledd_status; /* status of the LED display */
+ u8 light_level; /* light sensor level */
+ u8 light_switch; /* light sensor switch value */
+ u16 event_count[128]; /* count for each event TODO make this better */
struct input_dev *inputdev;
u16 *keycode_map;
};
.update_status = update_bl_status,
};
-/* These functions actually update the LED's, and are called from a
+/*
+ * These functions actually update the LED's, and are called from a
* workqueue. By doing this as separate work rather than when the LED
* subsystem asks, we avoid messing with the Asus ACPI stuff during a
- * potentially bad time, such as a timer interrupt. */
+ * potentially bad time, such as a timer interrupt.
+ */
static struct workqueue_struct *led_workqueue;
-#define ASUS_LED(object, ledname) \
+#define ASUS_LED(object, ledname, max) \
static void object##_led_set(struct led_classdev *led_cdev, \
enum led_brightness value); \
+ static enum led_brightness object##_led_get( \
+ struct led_classdev *led_cdev); \
static void object##_led_update(struct work_struct *ignored); \
static int object##_led_wk; \
static DECLARE_WORK(object##_led_work, object##_led_update); \
static struct led_classdev object##_led = { \
.name = "asus::" ledname, \
.brightness_set = object##_led_set, \
+ .brightness_get = object##_led_get, \
+ .max_brightness = max \
}
-ASUS_LED(mled, "mail");
-ASUS_LED(tled, "touchpad");
-ASUS_LED(rled, "record");
-ASUS_LED(pled, "phone");
-ASUS_LED(gled, "gaming");
+ASUS_LED(mled, "mail", 1);
+ASUS_LED(tled, "touchpad", 1);
+ASUS_LED(rled, "record", 1);
+ASUS_LED(pled, "phone", 1);
+ASUS_LED(gled, "gaming", 1);
+ASUS_LED(kled, "kbd_backlight", 3);
struct key_entry {
char type;
{KE_KEY, 0x41, KEY_NEXTSONG},
{KE_KEY, 0x43, KEY_STOPCD},
{KE_KEY, 0x45, KEY_PLAYPAUSE},
+ {KE_KEY, 0x4c, KEY_MEDIA},
{KE_KEY, 0x50, KEY_EMAIL},
{KE_KEY, 0x51, KEY_WWW},
+ {KE_KEY, 0x55, KEY_CALC},
{KE_KEY, 0x5C, KEY_SCREENLOCK}, /* Screenlock */
{KE_KEY, 0x5D, KEY_WLAN},
+ {KE_KEY, 0x5E, KEY_WLAN},
+ {KE_KEY, 0x5F, KEY_WLAN},
+ {KE_KEY, 0x60, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x61, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */
{KE_KEY, 0x82, KEY_CAMERA},
{KE_KEY, 0x8A, KEY_PROG1},
{KE_KEY, 0x95, KEY_MEDIA},
{KE_KEY, 0x99, KEY_PHONE},
+ {KE_KEY, 0xc4, KEY_KBDILLUMUP},
+ {KE_KEY, 0xc5, KEY_KBDILLUMDOWN},
{KE_END, 0},
};
static int write_acpi_int(acpi_handle handle, const char *method, int val,
struct acpi_buffer *output)
{
- struct acpi_object_list params; //list of input parameters (an int here)
- union acpi_object in_obj; //the only param we use
+ struct acpi_object_list params; /* list of input parameters (an int) */
+ union acpi_object in_obj; /* the only param we use */
acpi_status status;
if (!handle)
{ \
int value = object##_led_wk; \
write_status(object##_set_handle, value, (mask)); \
+ } \
+ static enum led_brightness object##_led_get( \
+ struct led_classdev *led_cdev) \
+ { \
+ return led_cdev->brightness; \
}
ASUS_LED_HANDLER(mled, MLED_ON);
ASUS_LED_HANDLER(tled, TLED_ON);
ASUS_LED_HANDLER(gled, GLED_ON);
+/*
+ * Keyboard backlight
+ */
+static int get_kled_lvl(void)
+{
+ unsigned long long kblv;
+ struct acpi_object_list params;
+ union acpi_object in_obj;
+ acpi_status rv;
+
+ params.count = 1;
+ params.pointer = &in_obj;
+ in_obj.type = ACPI_TYPE_INTEGER;
+ in_obj.integer.value = 2;
+
+ rv = acpi_evaluate_integer(kled_get_handle, NULL, ¶ms, &kblv);
+ if (ACPI_FAILURE(rv)) {
+ pr_warning("Error reading kled level\n");
+ return 0;
+ }
+ return kblv;
+}
+
+static int set_kled_lvl(int kblv)
+{
+ if (kblv > 0)
+ kblv = (1 << 7) | (kblv & 0x7F);
+ else
+ kblv = 0;
+
+ if (write_acpi_int(kled_set_handle, NULL, kblv, NULL)) {
+ pr_warning("Keyboard LED display write failed\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void kled_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ kled_led_wk = value;
+ queue_work(led_workqueue, &kled_led_work);
+}
+
+static void kled_led_update(struct work_struct *ignored)
+{
+ set_kled_lvl(kled_led_wk);
+}
+
+static enum led_brightness kled_led_get(struct led_classdev *led_cdev)
+{
+ return get_kled_lvl();
+}
+
static int get_lcd_state(void)
{
return read_status(LCD_ON);
{
int len = 0;
unsigned long long temp;
- char buf[16]; //enough for all info
+ char buf[16]; /* enough for all info */
acpi_status rv = AE_OK;
/*
*/
rv = acpi_evaluate_integer(hotk->handle, "SFUN", NULL, &temp);
if (!ACPI_FAILURE(rv))
- len += sprintf(page + len, "SFUN value : 0x%04x\n",
+ len += sprintf(page + len, "SFUN value : %#x\n",
+ (uint) temp);
+ /*
+ * The HWRS method return informations about the hardware.
+ * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * The significance of others is yet to be found.
+ * If we don't find the method, we assume the device are present.
+ */
+ rv = acpi_evaluate_integer(hotk->handle, "HRWS", NULL, &temp);
+ if (!ACPI_FAILURE(rv))
+ len += sprintf(page + len, "HRWS value : %#x\n",
(uint) temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
*/
rv = acpi_evaluate_integer(hotk->handle, "ASYM", NULL, &temp);
if (!ACPI_FAILURE(rv))
- len += sprintf(page + len, "ASYM value : 0x%04x\n",
+ len += sprintf(page + len, "ASYM value : %#x\n",
(uint) temp);
if (asus_info) {
snprintf(buf, 16, "%d", asus_info->length);
unsigned long long value = 0;
acpi_status rv = AE_OK;
- /* In most of the case, we know how to set the display, but sometime
- we can't read it */
+ /*
+ * In most of the case, we know how to set the display, but sometime
+ * we can't read it
+ */
if (display_get_handle) {
rv = acpi_evaluate_integer(display_get_handle, NULL,
NULL, &value);
ASUS_HANDLE_INIT(ledd_set);
+ ASUS_HANDLE_INIT(kled_set);
+ ASUS_HANDLE_INIT(kled_get);
+
/*
* The HWRS method return informations about the hardware.
* 0x80 bit is for WLAN, 0x100 for Bluetooth.
ASUS_HANDLE_INIT(display_set);
ASUS_HANDLE_INIT(display_get);
- /* There is a lot of models with "ALSL", but a few get
- a real light sens, so we need to check it. */
+ /*
+ * There is a lot of models with "ALSL", but a few get
+ * a real light sens, so we need to check it.
+ */
if (!ASUS_HANDLE_INIT(ls_switch))
ASUS_HANDLE_INIT(ls_level);
/* LCD Backlight is on by default */
write_status(NULL, 1, LCD_ON);
+ /* Keyboard Backlight is on by default */
+ if (kled_set_handle)
+ set_kled_lvl(1);
+
/* LED display is off by default */
hotk->ledd_status = 0xFFF;
ASUS_LED_UNREGISTER(pled);
ASUS_LED_UNREGISTER(rled);
ASUS_LED_UNREGISTER(gled);
+ ASUS_LED_UNREGISTER(kled);
}
static void asus_input_exit(void)
if (rv)
goto out4;
+ if (kled_set_handle && kled_get_handle)
+ rv = ASUS_LED_REGISTER(kled, dev);
+ if (rv)
+ goto out5;
+
led_workqueue = create_singlethread_workqueue("led_workqueue");
if (!led_workqueue)
- goto out5;
+ goto out6;
return 0;
-out5:
+out6:
rv = -ENOMEM;
+ ASUS_LED_UNREGISTER(kled);
+out5:
ASUS_LED_UNREGISTER(gled);
out4:
ASUS_LED_UNREGISTER(pled);
struct rfkill *wlan_rfkill;
struct rfkill *bluetooth_rfkill;
struct rfkill *wwan3g_rfkill;
+ struct rfkill *wimax_rfkill;
struct hotplug_slot *hotplug_slot;
- struct work_struct hotplug_work;
+ struct mutex hotplug_lock;
};
/* The actual device the driver binds to */
static struct eeepc_hotk *ehotk;
/* Platform device/driver */
+static int eeepc_hotk_thaw(struct device *device);
+static int eeepc_hotk_restore(struct device *device);
+
+static struct dev_pm_ops eeepc_pm_ops = {
+ .thaw = eeepc_hotk_thaw,
+ .restore = eeepc_hotk_restore,
+};
+
static struct platform_driver platform_driver = {
.driver = {
.name = EEEPC_HOTK_FILE,
.owner = THIS_MODULE,
+ .pm = &eeepc_pm_ops,
}
};
*/
static int eeepc_hotk_add(struct acpi_device *device);
static int eeepc_hotk_remove(struct acpi_device *device, int type);
-static int eeepc_hotk_resume(struct acpi_device *device);
static void eeepc_hotk_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id eeepc_device_ids[] = {
.ops = {
.add = eeepc_hotk_add,
.remove = eeepc_hotk_remove,
- .resume = eeepc_hotk_resume,
.notify = eeepc_hotk_notify,
},
};
static int eeepc_hotk_check(void)
{
- const struct key_entry *key;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
int result;
pr_info("Get control methods supported: 0x%x\n",
ehotk->cm_supported);
}
- ehotk->inputdev = input_allocate_device();
- if (!ehotk->inputdev) {
- pr_info("Unable to allocate input device\n");
- return 0;
- }
- ehotk->inputdev->name = "Asus EeePC extra buttons";
- ehotk->inputdev->phys = EEEPC_HOTK_FILE "/input0";
- ehotk->inputdev->id.bustype = BUS_HOST;
- ehotk->inputdev->getkeycode = eeepc_getkeycode;
- ehotk->inputdev->setkeycode = eeepc_setkeycode;
-
- for (key = eeepc_keymap; key->type != KE_END; key++) {
- switch (key->type) {
- case KE_KEY:
- set_bit(EV_KEY, ehotk->inputdev->evbit);
- set_bit(key->keycode, ehotk->inputdev->keybit);
- break;
- }
- }
- result = input_register_device(ehotk->inputdev);
- if (result) {
- pr_info("Unable to register input device\n");
- input_free_device(ehotk->inputdev);
- return 0;
- }
} else {
pr_err("Hotkey device not present, aborting\n");
return -EINVAL;
return 0;
}
-static void eeepc_hotplug_work(struct work_struct *work)
+static void eeepc_rfkill_hotplug(void)
{
struct pci_dev *dev;
- struct pci_bus *bus = pci_find_bus(0, 1);
- bool blocked;
+ struct pci_bus *bus;
+ bool blocked = eeepc_wlan_rfkill_blocked();
- if (!bus) {
- pr_warning("Unable to find PCI bus 1?\n");
- return;
- }
+ if (ehotk->wlan_rfkill)
+ rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
- blocked = eeepc_wlan_rfkill_blocked();
- if (!blocked) {
- dev = pci_get_slot(bus, 0);
- if (dev) {
- /* Device already present */
- pci_dev_put(dev);
- return;
- }
- dev = pci_scan_single_device(bus, 0);
- if (dev) {
- pci_bus_assign_resources(bus);
- if (pci_bus_add_device(dev))
- pr_err("Unable to hotplug wifi\n");
+ mutex_lock(&ehotk->hotplug_lock);
+
+ if (ehotk->hotplug_slot) {
+ bus = pci_find_bus(0, 1);
+ if (!bus) {
+ pr_warning("Unable to find PCI bus 1?\n");
+ goto out_unlock;
}
- } else {
- dev = pci_get_slot(bus, 0);
- if (dev) {
- pci_remove_bus_device(dev);
- pci_dev_put(dev);
+
+ if (!blocked) {
+ dev = pci_get_slot(bus, 0);
+ if (dev) {
+ /* Device already present */
+ pci_dev_put(dev);
+ goto out_unlock;
+ }
+ dev = pci_scan_single_device(bus, 0);
+ if (dev) {
+ pci_bus_assign_resources(bus);
+ if (pci_bus_add_device(dev))
+ pr_err("Unable to hotplug wifi\n");
+ }
+ } else {
+ dev = pci_get_slot(bus, 0);
+ if (dev) {
+ pci_remove_bus_device(dev);
+ pci_dev_put(dev);
+ }
}
}
- rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
+out_unlock:
+ mutex_unlock(&ehotk->hotplug_lock);
}
static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
- schedule_work(&ehotk->hotplug_work);
+ eeepc_rfkill_hotplug();
}
static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
return ret;
}
-static int eeepc_hotk_add(struct acpi_device *device)
-{
- int result;
-
- if (!device)
- return -EINVAL;
- pr_notice(EEEPC_HOTK_NAME "\n");
- ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL);
- if (!ehotk)
- return -ENOMEM;
- ehotk->init_flag = DISABLE_ASL_WLAN | DISABLE_ASL_DISPLAYSWITCH;
- ehotk->handle = device->handle;
- strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME);
- strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS);
- device->driver_data = ehotk;
- ehotk->device = device;
- result = eeepc_hotk_check();
- if (result)
- goto ehotk_fail;
-
- return 0;
-
- ehotk_fail:
- kfree(ehotk);
- ehotk = NULL;
-
- return result;
-}
-
-static int eeepc_hotk_remove(struct acpi_device *device, int type)
-{
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- kfree(ehotk);
- return 0;
-}
-
-static int eeepc_hotk_resume(struct acpi_device *device)
+static int eeepc_hotk_thaw(struct device *device)
{
if (ehotk->wlan_rfkill) {
bool wlan;
- /* Workaround - it seems that _PTS disables the wireless
- without notification or changing the value read by WLAN.
- Normally this is fine because the correct value is restored
- from the non-volatile storage on resume, but we need to do
- it ourself if case suspend is aborted, or we lose wireless.
+ /*
+ * Work around bios bug - acpi _PTS turns off the wireless led
+ * during suspend. Normally it restores it on resume, but
+ * we should kick it ourselves in case hibernation is aborted.
*/
wlan = get_acpi(CM_ASL_WLAN);
set_acpi(CM_ASL_WLAN, wlan);
+ }
- rfkill_set_sw_state(ehotk->wlan_rfkill, wlan != 1);
+ return 0;
+}
- schedule_work(&ehotk->hotplug_work);
- }
+static int eeepc_hotk_restore(struct device *device)
+{
+ /* Refresh both wlan rfkill state and pci hotplug */
+ if (ehotk->wlan_rfkill)
+ eeepc_rfkill_hotplug();
if (ehotk->bluetooth_rfkill)
rfkill_set_sw_state(ehotk->bluetooth_rfkill,
get_acpi(CM_ASL_BLUETOOTH) != 1);
+ if (ehotk->wwan3g_rfkill)
+ rfkill_set_sw_state(ehotk->wwan3g_rfkill,
+ get_acpi(CM_ASL_3G) != 1);
+ if (ehotk->wimax_rfkill)
+ rfkill_set_sw_state(ehotk->wimax_rfkill,
+ get_acpi(CM_ASL_WIMAX) != 1);
return 0;
}
static void eeepc_rfkill_exit(void)
{
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P5");
eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
- if (ehotk->wlan_rfkill)
+ if (ehotk->wlan_rfkill) {
rfkill_unregister(ehotk->wlan_rfkill);
- if (ehotk->bluetooth_rfkill)
- rfkill_unregister(ehotk->bluetooth_rfkill);
- if (ehotk->wwan3g_rfkill)
- rfkill_unregister(ehotk->wwan3g_rfkill);
+ rfkill_destroy(ehotk->wlan_rfkill);
+ ehotk->wlan_rfkill = NULL;
+ }
+ /*
+ * Refresh pci hotplug in case the rfkill state was changed after
+ * eeepc_unregister_rfkill_notifier()
+ */
+ eeepc_rfkill_hotplug();
if (ehotk->hotplug_slot)
pci_hp_deregister(ehotk->hotplug_slot);
+
+ if (ehotk->bluetooth_rfkill) {
+ rfkill_unregister(ehotk->bluetooth_rfkill);
+ rfkill_destroy(ehotk->bluetooth_rfkill);
+ ehotk->bluetooth_rfkill = NULL;
+ }
+ if (ehotk->wwan3g_rfkill) {
+ rfkill_unregister(ehotk->wwan3g_rfkill);
+ rfkill_destroy(ehotk->wwan3g_rfkill);
+ ehotk->wwan3g_rfkill = NULL;
+ }
+ if (ehotk->wimax_rfkill) {
+ rfkill_unregister(ehotk->wimax_rfkill);
+ rfkill_destroy(ehotk->wimax_rfkill);
+ ehotk->wimax_rfkill = NULL;
+ }
}
static void eeepc_input_exit(void)
eeepc_hwmon_device = NULL;
}
-static void __exit eeepc_laptop_exit(void)
-{
- eeepc_backlight_exit();
- eeepc_rfkill_exit();
- eeepc_input_exit();
- eeepc_hwmon_exit();
- acpi_bus_unregister_driver(&eeepc_hotk_driver);
- sysfs_remove_group(&platform_device->dev.kobj,
- &platform_attribute_group);
- platform_device_unregister(platform_device);
- platform_driver_unregister(&platform_driver);
-}
-
static int eeepc_new_rfkill(struct rfkill **rfkill,
const char *name, struct device *dev,
enum rfkill_type type, int cm)
{
int result = 0;
- INIT_WORK(&ehotk->hotplug_work, eeepc_hotplug_work);
-
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+ mutex_init(&ehotk->hotplug_lock);
result = eeepc_new_rfkill(&ehotk->wlan_rfkill,
"eeepc-wlan", dev,
if (result && result != -ENODEV)
goto exit;
+ result = eeepc_new_rfkill(&ehotk->wimax_rfkill,
+ "eeepc-wimax", dev,
+ RFKILL_TYPE_WIMAX, CM_ASL_WIMAX);
+
+ if (result && result != -ENODEV)
+ goto exit;
+
result = eeepc_setup_pci_hotplug();
/*
* If we get -EBUSY then something else is handling the PCI hotplug -
if (result == -EBUSY)
result = 0;
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P5");
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+ /*
+ * Refresh pci hotplug in case the rfkill state was changed during
+ * setup.
+ */
+ eeepc_rfkill_hotplug();
+
exit:
if (result && result != -ENODEV)
eeepc_rfkill_exit();
return result;
}
-static int __init eeepc_laptop_init(void)
+static int eeepc_input_init(struct device *dev)
{
- struct device *dev;
+ const struct key_entry *key;
int result;
- if (acpi_disabled)
- return -ENODEV;
- result = acpi_bus_register_driver(&eeepc_hotk_driver);
- if (result < 0)
+ ehotk->inputdev = input_allocate_device();
+ if (!ehotk->inputdev) {
+ pr_info("Unable to allocate input device\n");
+ return -ENOMEM;
+ }
+ ehotk->inputdev->name = "Asus EeePC extra buttons";
+ ehotk->inputdev->dev.parent = dev;
+ ehotk->inputdev->phys = EEEPC_HOTK_FILE "/input0";
+ ehotk->inputdev->id.bustype = BUS_HOST;
+ ehotk->inputdev->getkeycode = eeepc_getkeycode;
+ ehotk->inputdev->setkeycode = eeepc_setkeycode;
+
+ for (key = eeepc_keymap; key->type != KE_END; key++) {
+ switch (key->type) {
+ case KE_KEY:
+ set_bit(EV_KEY, ehotk->inputdev->evbit);
+ set_bit(key->keycode, ehotk->inputdev->keybit);
+ break;
+ }
+ }
+ result = input_register_device(ehotk->inputdev);
+ if (result) {
+ pr_info("Unable to register input device\n");
+ input_free_device(ehotk->inputdev);
return result;
- if (!ehotk) {
- acpi_bus_unregister_driver(&eeepc_hotk_driver);
- return -ENODEV;
}
+ return 0;
+}
+
+static int eeepc_hotk_add(struct acpi_device *device)
+{
+ struct device *dev;
+ int result;
+ if (!device)
+ return -EINVAL;
+ pr_notice(EEEPC_HOTK_NAME "\n");
+ ehotk = kzalloc(sizeof(struct eeepc_hotk), GFP_KERNEL);
+ if (!ehotk)
+ return -ENOMEM;
+ ehotk->init_flag = DISABLE_ASL_WLAN | DISABLE_ASL_DISPLAYSWITCH;
+ ehotk->handle = device->handle;
+ strcpy(acpi_device_name(device), EEEPC_HOTK_DEVICE_NAME);
+ strcpy(acpi_device_class(device), EEEPC_HOTK_CLASS);
+ device->driver_data = ehotk;
+ ehotk->device = device;
+
+ result = eeepc_hotk_check();
+ if (result)
+ goto fail_platform_driver;
eeepc_enable_camera();
/* Register platform stuff */
pr_info("Backlight controlled by ACPI video "
"driver\n");
+ result = eeepc_input_init(dev);
+ if (result)
+ goto fail_input;
+
result = eeepc_hwmon_init(dev);
if (result)
goto fail_hwmon;
goto fail_rfkill;
return 0;
+
fail_rfkill:
eeepc_hwmon_exit();
fail_hwmon:
+ eeepc_input_exit();
+fail_input:
eeepc_backlight_exit();
fail_backlight:
sysfs_remove_group(&platform_device->dev.kobj,
fail_platform_device1:
platform_driver_unregister(&platform_driver);
fail_platform_driver:
- eeepc_input_exit();
+ kfree(ehotk);
+
return result;
}
+static int eeepc_hotk_remove(struct acpi_device *device, int type)
+{
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ eeepc_backlight_exit();
+ eeepc_rfkill_exit();
+ eeepc_input_exit();
+ eeepc_hwmon_exit();
+ sysfs_remove_group(&platform_device->dev.kobj,
+ &platform_attribute_group);
+ platform_device_unregister(platform_device);
+ platform_driver_unregister(&platform_driver);
+
+ kfree(ehotk);
+ return 0;
+}
+
+static int __init eeepc_laptop_init(void)
+{
+ int result;
+
+ if (acpi_disabled)
+ return -ENODEV;
+ result = acpi_bus_register_driver(&eeepc_hotk_driver);
+ if (result < 0)
+ return result;
+ if (!ehotk) {
+ acpi_bus_unregister_driver(&eeepc_hotk_driver);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void __exit eeepc_laptop_exit(void)
+{
+ acpi_bus_unregister_driver(&eeepc_hotk_driver);
+}
+
module_init(eeepc_laptop_init);
module_exit(eeepc_laptop_exit);
#include <linux/kfifo.h>
#include <linux/video_output.h>
#include <linux/platform_device.h>
-#ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
#include <linux/leds.h>
#endif
-#define FUJITSU_DRIVER_VERSION "0.5.0"
+#define FUJITSU_DRIVER_VERSION "0.6.0"
#define FUJITSU_LCD_N_LEVELS 8
/* FUNC interface - responses */
#define UNSUPPORTED_CMD 0x80000000
-#ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
/* FUNC interface - LED control */
#define FUNC_LED_OFF 0x1
#define FUNC_LED_ON 0x30001
static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event);
-#ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
static enum led_brightness logolamp_get(struct led_classdev *cdev);
static void logolamp_set(struct led_classdev *cdev,
enum led_brightness brightness);
return out_obj.integer.value;
}
-#ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
/* LED class callbacks */
static void logolamp_set(struct led_classdev *cdev,
if (level < 0 || level >= fujitsu->max_brightness)
return -EINVAL;
- if (!fujitsu)
- return -EINVAL;
-
status = acpi_get_handle(fujitsu->acpi_handle, "SBLL", &handle);
if (ACPI_FAILURE(status)) {
vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBLL not present\n");
if (level < 0 || level >= fujitsu->max_brightness)
return -EINVAL;
- if (!fujitsu)
- return -EINVAL;
-
status = acpi_get_handle(fujitsu->acpi_handle, "SBL2", &handle);
if (ACPI_FAILURE(status)) {
vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBL2 not present\n");
result = acpi_bus_get_power(fujitsu->acpi_handle, &state);
if (result) {
printk(KERN_ERR "Error reading power state\n");
- goto end;
+ goto err_unregister_input_dev;
}
- printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
+ printk(KERN_INFO "ACPI: %s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
!device->power.state ? "on" : "off");
return result;
-end:
+err_unregister_input_dev:
+ input_unregister_device(input);
err_free_input_dev:
input_free_device(input);
err_stop:
-
return result;
}
static int acpi_fujitsu_remove(struct acpi_device *device, int type)
{
- struct fujitsu_t *fujitsu = NULL;
+ struct fujitsu_t *fujitsu = acpi_driver_data(device);
+ struct input_dev *input = fujitsu->input;
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
+ input_unregister_device(input);
- fujitsu = acpi_driver_data(device);
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
+ input_free_device(input);
fujitsu->acpi_handle = NULL;
result = acpi_bus_get_power(fujitsu_hotkey->acpi_handle, &state);
if (result) {
printk(KERN_ERR "Error reading power state\n");
- goto end;
+ goto err_unregister_input_dev;
}
- printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
+ printk(KERN_INFO "ACPI: %s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
!device->power.state ? "on" : "off");
printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n",
call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0));
- #ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
if (call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) {
result = led_classdev_register(&fujitsu->pf_device->dev,
&logolamp_led);
"LED handler for keyboard lamps, error %i\n", result);
}
}
- #endif
+#endif
return result;
-end:
+err_unregister_input_dev:
+ input_unregister_device(input);
err_free_input_dev:
input_free_device(input);
err_free_fifo:
kfifo_free(fujitsu_hotkey->fifo);
err_stop:
-
return result;
}
static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
{
- struct fujitsu_hotkey_t *fujitsu_hotkey = NULL;
+ struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device);
+ struct input_dev *input = fujitsu_hotkey->input;
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
+#ifdef CONFIG_LEDS_CLASS
+ if (fujitsu_hotkey->logolamp_registered)
+ led_classdev_unregister(&logolamp_led);
- fujitsu_hotkey = acpi_driver_data(device);
+ if (fujitsu_hotkey->kblamps_registered)
+ led_classdev_unregister(&kblamps_led);
+#endif
- fujitsu_hotkey->acpi_handle = NULL;
+ input_unregister_device(input);
+
+ input_free_device(input);
kfifo_free(fujitsu_hotkey->fifo);
+ fujitsu_hotkey->acpi_handle = NULL;
+
return 0;
}
fujitsu->bl_device =
backlight_device_register("fujitsu-laptop", NULL, NULL,
&fujitsubl_ops);
- if (IS_ERR(fujitsu->bl_device))
- return PTR_ERR(fujitsu->bl_device);
+ if (IS_ERR(fujitsu->bl_device)) {
+ ret = PTR_ERR(fujitsu->bl_device);
+ fujitsu->bl_device = NULL;
+ goto fail_sysfs_group;
+ }
max_brightness = fujitsu->max_brightness;
fujitsu->bl_device->props.max_brightness = max_brightness - 1;
fujitsu->bl_device->props.brightness = fujitsu->brightness_level;
return 0;
fail_hotkey1:
-
kfree(fujitsu_hotkey);
-
fail_hotkey:
-
platform_driver_unregister(&fujitsupf_driver);
-
fail_backlight:
-
if (fujitsu->bl_device)
backlight_device_unregister(fujitsu->bl_device);
-
+fail_sysfs_group:
+ sysfs_remove_group(&fujitsu->pf_device->dev.kobj,
+ &fujitsupf_attribute_group);
fail_platform_device2:
-
platform_device_del(fujitsu->pf_device);
-
fail_platform_device1:
-
platform_device_put(fujitsu->pf_device);
-
fail_platform_driver:
-
acpi_bus_unregister_driver(&acpi_fujitsu_driver);
-
fail_acpi:
-
kfree(fujitsu);
return ret;
static void __exit fujitsu_cleanup(void)
{
- #ifdef CONFIG_LEDS_CLASS
- if (fujitsu_hotkey->logolamp_registered != 0)
- led_classdev_unregister(&logolamp_led);
+ acpi_bus_unregister_driver(&acpi_fujitsu_hotkey_driver);
- if (fujitsu_hotkey->kblamps_registered != 0)
- led_classdev_unregister(&kblamps_led);
- #endif
+ kfree(fujitsu_hotkey);
- sysfs_remove_group(&fujitsu->pf_device->dev.kobj,
- &fujitsupf_attribute_group);
- platform_device_unregister(fujitsu->pf_device);
platform_driver_unregister(&fujitsupf_driver);
+
if (fujitsu->bl_device)
backlight_device_unregister(fujitsu->bl_device);
- acpi_bus_unregister_driver(&acpi_fujitsu_driver);
+ sysfs_remove_group(&fujitsu->pf_device->dev.kobj,
+ &fujitsupf_attribute_group);
- kfree(fujitsu);
+ platform_device_unregister(fujitsu->pf_device);
- acpi_bus_unregister_driver(&acpi_fujitsu_hotkey_driver);
+ acpi_bus_unregister_driver(&acpi_fujitsu_driver);
- kfree(fujitsu_hotkey);
+ kfree(fujitsu);
printk(KERN_INFO "fujitsu-laptop: driver unloaded.\n");
}
}
if (bluetooth_rfkill) {
rfkill_unregister(bluetooth_rfkill);
- rfkill_destroy(wifi_rfkill);
+ rfkill_destroy(bluetooth_rfkill);
}
if (wwan_rfkill) {
rfkill_unregister(wwan_rfkill);
void *context, void **return_value)
{
struct acpi_device_info *info;
- struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
-
- if (ACPI_SUCCESS(acpi_get_object_info(handle, &buffer))) {
- info = buffer.pointer;
+ if (ACPI_SUCCESS(acpi_get_object_info(handle, &info))) {
printk(KERN_WARNING DRV_PFX "method: name: %4.4s, args %X\n",
(char *)&info->name, info->param_count);
- kfree(buffer.pointer);
+ kfree(info);
}
return AE_OK;
tp_rfk = tpacpi_rfkill_switches[id];
if (tp_rfk) {
rfkill_unregister(tp_rfk->rfkill);
+ rfkill_destroy(tp_rfk->rfkill);
tpacpi_rfkill_switches[id] = NULL;
kfree(tp_rfk);
}
#endif
}
+/*************************************************************************
+ * Firmware Data
+ */
+
+/*
+ * Table of recommended minimum BIOS versions
+ *
+ * Reasons for listing:
+ * 1. Stable BIOS, listed because the unknown ammount of
+ * bugs and bad ACPI behaviour on older versions
+ *
+ * 2. BIOS or EC fw with known bugs that trigger on Linux
+ *
+ * 3. BIOS with known reduced functionality in older versions
+ *
+ * We recommend the latest BIOS and EC version.
+ * We only support the latest BIOS and EC fw version as a rule.
+ *
+ * Sources: IBM ThinkPad Public Web Documents (update changelogs),
+ * Information from users in ThinkWiki
+ *
+ * WARNING: we use this table also to detect that the machine is
+ * a ThinkPad in some cases, so don't remove entries lightly.
+ */
+
+#define TPV_Q(__v, __id1, __id2, __bv1, __bv2) \
+ { .vendor = (__v), \
+ .bios = TPID(__id1, __id2), \
+ .ec = TPACPI_MATCH_ANY, \
+ .quirks = TPACPI_MATCH_ANY << 16 \
+ | (__bv1) << 8 | (__bv2) }
+
+#define TPV_Q_X(__v, __bid1, __bid2, __bv1, __bv2, \
+ __eid1, __eid2, __ev1, __ev2) \
+ { .vendor = (__v), \
+ .bios = TPID(__bid1, __bid2), \
+ .ec = TPID(__eid1, __eid2), \
+ .quirks = (__ev1) << 24 | (__ev2) << 16 \
+ | (__bv1) << 8 | (__bv2) }
+
+#define TPV_QI0(__id1, __id2, __bv1, __bv2) \
+ TPV_Q(PCI_VENDOR_ID_IBM, __id1, __id2, __bv1, __bv2)
+
+#define TPV_QI1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \
+ TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, \
+ __bv1, __bv2, __id1, __id2, __ev1, __ev2)
+
+#define TPV_QI2(__bid1, __bid2, __bv1, __bv2, \
+ __eid1, __eid2, __ev1, __ev2) \
+ TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, \
+ __bv1, __bv2, __eid1, __eid2, __ev1, __ev2)
+
+#define TPV_QL0(__id1, __id2, __bv1, __bv2) \
+ TPV_Q(PCI_VENDOR_ID_LENOVO, __id1, __id2, __bv1, __bv2)
+
+#define TPV_QL1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \
+ TPV_Q_X(PCI_VENDOR_ID_LENOVO, __id1, __id2, \
+ __bv1, __bv2, __id1, __id2, __ev1, __ev2)
+
+#define TPV_QL2(__bid1, __bid2, __bv1, __bv2, \
+ __eid1, __eid2, __ev1, __ev2) \
+ TPV_Q_X(PCI_VENDOR_ID_LENOVO, __bid1, __bid2, \
+ __bv1, __bv2, __eid1, __eid2, __ev1, __ev2)
+
+static const struct tpacpi_quirk tpacpi_bios_version_qtable[] __initconst = {
+ /* Numeric models ------------------ */
+ /* FW MODEL BIOS VERS */
+ TPV_QI0('I', 'M', '6', '5'), /* 570 */
+ TPV_QI0('I', 'U', '2', '6'), /* 570E */
+ TPV_QI0('I', 'B', '5', '4'), /* 600 */
+ TPV_QI0('I', 'H', '4', '7'), /* 600E */
+ TPV_QI0('I', 'N', '3', '6'), /* 600E */
+ TPV_QI0('I', 'T', '5', '5'), /* 600X */
+ TPV_QI0('I', 'D', '4', '8'), /* 770, 770E, 770ED */
+ TPV_QI0('I', 'I', '4', '2'), /* 770X */
+ TPV_QI0('I', 'O', '2', '3'), /* 770Z */
+
+ /* A-series ------------------------- */
+ /* FW MODEL BIOS VERS EC VERS */
+ TPV_QI0('I', 'W', '5', '9'), /* A20m */
+ TPV_QI0('I', 'V', '6', '9'), /* A20p */
+ TPV_QI0('1', '0', '2', '6'), /* A21e, A22e */
+ TPV_QI0('K', 'U', '3', '6'), /* A21e */
+ TPV_QI0('K', 'X', '3', '6'), /* A21m, A22m */
+ TPV_QI0('K', 'Y', '3', '8'), /* A21p, A22p */
+ TPV_QI0('1', 'B', '1', '7'), /* A22e */
+ TPV_QI0('1', '3', '2', '0'), /* A22m */
+ TPV_QI0('1', 'E', '7', '3'), /* A30/p (0) */
+ TPV_QI1('1', 'G', '4', '1', '1', '7'), /* A31/p (0) */
+ TPV_QI1('1', 'N', '1', '6', '0', '7'), /* A31/p (0) */
+
+ /* G-series ------------------------- */
+ /* FW MODEL BIOS VERS */
+ TPV_QI0('1', 'T', 'A', '6'), /* G40 */
+ TPV_QI0('1', 'X', '5', '7'), /* G41 */
+
+ /* R-series, T-series --------------- */
+ /* FW MODEL BIOS VERS EC VERS */
+ TPV_QI0('1', 'C', 'F', '0'), /* R30 */
+ TPV_QI0('1', 'F', 'F', '1'), /* R31 */
+ TPV_QI0('1', 'M', '9', '7'), /* R32 */
+ TPV_QI0('1', 'O', '6', '1'), /* R40 */
+ TPV_QI0('1', 'P', '6', '5'), /* R40 */
+ TPV_QI0('1', 'S', '7', '0'), /* R40e */
+ TPV_QI1('1', 'R', 'D', 'R', '7', '1'), /* R50/p, R51,
+ T40/p, T41/p, T42/p (1) */
+ TPV_QI1('1', 'V', '7', '1', '2', '8'), /* R50e, R51 (1) */
+ TPV_QI1('7', '8', '7', '1', '0', '6'), /* R51e (1) */
+ TPV_QI1('7', '6', '6', '9', '1', '6'), /* R52 (1) */
+ TPV_QI1('7', '0', '6', '9', '2', '8'), /* R52, T43 (1) */
+
+ TPV_QI0('I', 'Y', '6', '1'), /* T20 */
+ TPV_QI0('K', 'Z', '3', '4'), /* T21 */
+ TPV_QI0('1', '6', '3', '2'), /* T22 */
+ TPV_QI1('1', 'A', '6', '4', '2', '3'), /* T23 (0) */
+ TPV_QI1('1', 'I', '7', '1', '2', '0'), /* T30 (0) */
+ TPV_QI1('1', 'Y', '6', '5', '2', '9'), /* T43/p (1) */
+
+ TPV_QL1('7', '9', 'E', '3', '5', '0'), /* T60/p */
+ TPV_QL1('7', 'C', 'D', '2', '2', '2'), /* R60, R60i */
+ TPV_QL0('7', 'E', 'D', '0'), /* R60e, R60i */
+
+ /* BIOS FW BIOS VERS EC FW EC VERS */
+ TPV_QI2('1', 'W', '9', '0', '1', 'V', '2', '8'), /* R50e (1) */
+ TPV_QL2('7', 'I', '3', '4', '7', '9', '5', '0'), /* T60/p wide */
+
+ /* X-series ------------------------- */
+ /* FW MODEL BIOS VERS EC VERS */
+ TPV_QI0('I', 'Z', '9', 'D'), /* X20, X21 */
+ TPV_QI0('1', 'D', '7', '0'), /* X22, X23, X24 */
+ TPV_QI1('1', 'K', '4', '8', '1', '8'), /* X30 (0) */
+ TPV_QI1('1', 'Q', '9', '7', '2', '3'), /* X31, X32 (0) */
+ TPV_QI1('1', 'U', 'D', '3', 'B', '2'), /* X40 (0) */
+ TPV_QI1('7', '4', '6', '4', '2', '7'), /* X41 (0) */
+ TPV_QI1('7', '5', '6', '0', '2', '0'), /* X41t (0) */
+
+ TPV_QL0('7', 'B', 'D', '7'), /* X60/s */
+ TPV_QL0('7', 'J', '3', '0'), /* X60t */
+
+ /* (0) - older versions lack DMI EC fw string and functionality */
+ /* (1) - older versions known to lack functionality */
+};
+
+#undef TPV_QL1
+#undef TPV_QL0
+#undef TPV_QI2
+#undef TPV_QI1
+#undef TPV_QI0
+#undef TPV_Q_X
+#undef TPV_Q
+
+static void __init tpacpi_check_outdated_fw(void)
+{
+ unsigned long fwvers;
+ u16 ec_version, bios_version;
+
+ fwvers = tpacpi_check_quirks(tpacpi_bios_version_qtable,
+ ARRAY_SIZE(tpacpi_bios_version_qtable));
+
+ if (!fwvers)
+ return;
+
+ bios_version = fwvers & 0xffffU;
+ ec_version = (fwvers >> 16) & 0xffffU;
+
+ /* note that unknown versions are set to 0x0000 and we use that */
+ if ((bios_version > thinkpad_id.bios_release) ||
+ (ec_version > thinkpad_id.ec_release &&
+ ec_version != TPACPI_MATCH_ANY)) {
+ /*
+ * The changelogs would let us track down the exact
+ * reason, but it is just too much of a pain to track
+ * it. We only list BIOSes that are either really
+ * broken, or really stable to begin with, so it is
+ * best if the user upgrades the firmware anyway.
+ */
+ printk(TPACPI_WARN
+ "WARNING: Outdated ThinkPad BIOS/EC firmware\n");
+ printk(TPACPI_WARN
+ "WARNING: This firmware may be missing critical bug "
+ "fixes and/or important features\n");
+ }
+}
+
+static bool __init tpacpi_is_fw_known(void)
+{
+ return tpacpi_check_quirks(tpacpi_bios_version_qtable,
+ ARRAY_SIZE(tpacpi_bios_version_qtable)) != 0;
+}
+
/****************************************************************************
****************************************************************************
*
(thinkpad_id.nummodel_str) ?
thinkpad_id.nummodel_str : "unknown");
+ tpacpi_check_outdated_fw();
return 0;
}
u8 volume_level;
};
+/* kthread for the hotkey poller */
static struct task_struct *tpacpi_hotkey_task;
-static u32 hotkey_source_mask; /* bit mask 0=ACPI,1=NVRAM */
-static int hotkey_poll_freq = 10; /* Hz */
+
+/* Acquired while the poller kthread is running, use to sync start/stop */
static struct mutex hotkey_thread_mutex;
+
+/*
+ * Acquire mutex to write poller control variables.
+ * Increment hotkey_config_change when changing them.
+ *
+ * See HOTKEY_CONFIG_CRITICAL_START/HOTKEY_CONFIG_CRITICAL_END
+ */
static struct mutex hotkey_thread_data_mutex;
static unsigned int hotkey_config_change;
+/*
+ * hotkey poller control variables
+ *
+ * Must be atomic or readers will also need to acquire mutex
+ */
+static u32 hotkey_source_mask; /* bit mask 0=ACPI,1=NVRAM */
+static unsigned int hotkey_poll_freq = 10; /* Hz */
+
+#define HOTKEY_CONFIG_CRITICAL_START \
+ do { \
+ mutex_lock(&hotkey_thread_data_mutex); \
+ hotkey_config_change++; \
+ } while (0);
+#define HOTKEY_CONFIG_CRITICAL_END \
+ mutex_unlock(&hotkey_thread_data_mutex);
+
#else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
#define hotkey_source_mask 0U
+#define HOTKEY_CONFIG_CRITICAL_START
+#define HOTKEY_CONFIG_CRITICAL_END
#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
static struct attribute_set *hotkey_dev_attributes;
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
-#define HOTKEY_CONFIG_CRITICAL_START \
- do { \
- mutex_lock(&hotkey_thread_data_mutex); \
- hotkey_config_change++; \
- } while (0);
-#define HOTKEY_CONFIG_CRITICAL_END \
- mutex_unlock(&hotkey_thread_data_mutex);
-#else
-#define HOTKEY_CONFIG_CRITICAL_START
-#define HOTKEY_CONFIG_CRITICAL_END
-#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
-
/* HKEY.MHKG() return bits */
#define TP_HOTKEY_TABLET_MASK (1 << 3)
if (!acpi_evalf(hkey_handle, &m, "DHKN", "d"))
return -EIO;
}
+ HOTKEY_CONFIG_CRITICAL_START
hotkey_mask = m | (hotkey_source_mask & hotkey_mask);
+ HOTKEY_CONFIG_CRITICAL_END
return 0;
}
unsigned int si, so;
unsigned long t;
unsigned int change_detector, must_reset;
+ unsigned int poll_freq;
mutex_lock(&hotkey_thread_mutex);
mutex_lock(&hotkey_thread_data_mutex);
change_detector = hotkey_config_change;
mask = hotkey_source_mask & hotkey_mask;
+ poll_freq = hotkey_poll_freq;
mutex_unlock(&hotkey_thread_data_mutex);
hotkey_read_nvram(&s[so], mask);
- while (!kthread_should_stop() && hotkey_poll_freq) {
- if (t == 0)
- t = 1000/hotkey_poll_freq;
+ while (!kthread_should_stop()) {
+ if (t == 0) {
+ if (likely(poll_freq))
+ t = 1000/poll_freq;
+ else
+ t = 100; /* should never happen... */
+ }
t = msleep_interruptible(t);
if (unlikely(kthread_should_stop()))
break;
change_detector = hotkey_config_change;
}
mask = hotkey_source_mask & hotkey_mask;
+ poll_freq = hotkey_poll_freq;
mutex_unlock(&hotkey_thread_data_mutex);
if (likely(mask)) {
return 0;
}
+/* call with hotkey_mutex held */
static void hotkey_poll_stop_sync(void)
{
if (tpacpi_hotkey_task) {
}
/* call with hotkey_mutex held */
-static void hotkey_poll_setup(int may_warn)
+static void hotkey_poll_setup(bool may_warn)
{
- if ((hotkey_source_mask & hotkey_mask) != 0 &&
- hotkey_poll_freq > 0 &&
+ u32 hotkeys_to_poll = hotkey_source_mask & hotkey_mask;
+
+ if (hotkeys_to_poll != 0 && hotkey_poll_freq > 0 &&
(tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) {
if (!tpacpi_hotkey_task) {
tpacpi_hotkey_task = kthread_run(hotkey_kthread,
}
} else {
hotkey_poll_stop_sync();
- if (may_warn &&
- hotkey_source_mask != 0 && hotkey_poll_freq == 0) {
+ if (may_warn && hotkeys_to_poll != 0 &&
+ hotkey_poll_freq == 0) {
printk(TPACPI_NOTICE
"hot keys 0x%08x require polling, "
"which is currently disabled\n",
- hotkey_source_mask);
+ hotkeys_to_poll);
}
}
}
-static void hotkey_poll_setup_safe(int may_warn)
+static void hotkey_poll_setup_safe(bool may_warn)
{
mutex_lock(&hotkey_mutex);
hotkey_poll_setup(may_warn);
mutex_unlock(&hotkey_mutex);
}
+/* call with hotkey_mutex held */
+static void hotkey_poll_set_freq(unsigned int freq)
+{
+ if (!freq)
+ hotkey_poll_stop_sync();
+
+ HOTKEY_CONFIG_CRITICAL_START
+ hotkey_poll_freq = freq;
+ HOTKEY_CONFIG_CRITICAL_END
+}
+
#else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
-static void hotkey_poll_setup_safe(int __unused)
+static void hotkey_poll_setup_safe(bool __unused)
{
}
case TPACPI_LIFE_EXITING:
return -EBUSY;
case TPACPI_LIFE_RUNNING:
- hotkey_poll_setup_safe(0);
+ hotkey_poll_setup_safe(false);
return 0;
}
{
/* disable hotkey polling when possible */
if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING)
- hotkey_poll_setup_safe(0);
+ hotkey_poll_setup_safe(false);
}
/* sysfs hotkey enable ------------------------------------------------- */
res = hotkey_mask_set(t);
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- hotkey_poll_setup(1);
+ hotkey_poll_setup(true);
#endif
mutex_unlock(&hotkey_mutex);
struct device_attribute *attr,
char *buf)
{
+ printk_deprecated_attribute("hotkey_bios_mask",
+ "This attribute is useless.");
return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_orig_mask);
}
hotkey_source_mask = t;
HOTKEY_CONFIG_CRITICAL_END
- hotkey_poll_setup(1);
+ hotkey_poll_setup(true);
+ hotkey_mask_set(hotkey_mask);
mutex_unlock(&hotkey_mutex);
if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
- hotkey_poll_freq = t;
+ hotkey_poll_set_freq(t);
+ hotkey_poll_setup(true);
- hotkey_poll_setup(1);
mutex_unlock(&hotkey_mutex);
tpacpi_disclose_usertask("hotkey_poll_freq", "set to %lu\n", t);
static void hotkey_exit(void)
{
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+ mutex_lock(&hotkey_mutex);
hotkey_poll_stop_sync();
+ mutex_unlock(&hotkey_mutex);
#endif
if (hotkey_dev_attributes)
}
}
+static void __init hotkey_unmap(const unsigned int scancode)
+{
+ if (hotkey_keycode_map[scancode] != KEY_RESERVED) {
+ clear_bit(hotkey_keycode_map[scancode],
+ tpacpi_inputdev->keybit);
+ hotkey_keycode_map[scancode] = KEY_RESERVED;
+ }
+}
+
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
/* Requirements for changing the default keymaps:
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
- /* These either have to go through ACPI video, or
- * act like in the IBM ThinkPads, so don't ever
- * enable them by default */
- KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
- KEY_RESERVED, /* 0x10: FN+END (brightness down) */
+ /* These should be enabled --only-- when ACPI video
+ * is disabled (i.e. in "vendor" mode), and are handled
+ * in a special way by the init code */
+ KEY_BRIGHTNESSUP, /* 0x0F: FN+HOME (brightness up) */
+ KEY_BRIGHTNESSDOWN, /* 0x10: FN+END (brightness down) */
KEY_RESERVED, /* 0x11: FN+PGUP (thinklight toggle) */
goto err_exit;
}
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- if (tp_features.hotkey_mask) {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
- & ~hotkey_all_mask;
- } else {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK;
- }
-
- vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
- "hotkey source mask 0x%08x, polling freq %d\n",
- hotkey_source_mask, hotkey_poll_freq);
-#endif
-
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
if (dbg_wlswemul) {
tp_features.hotkey_wlsw = 1;
"Disabling thinkpad-acpi brightness events "
"by default...\n");
- /* The hotkey_reserved_mask change below is not
- * necessary while the keys are at KEY_RESERVED in the
- * default map, but better safe than sorry, leave it
- * here as a marker of what we have to do, especially
- * when we finally become able to set this at runtime
- * on response to X.org requests */
+ /* Disable brightness up/down on Lenovo thinkpads when
+ * ACPI is handling them, otherwise it is plain impossible
+ * for userspace to do something even remotely sane */
hotkey_reserved_mask |=
(1 << TP_ACPI_HOTKEYSCAN_FNHOME)
| (1 << TP_ACPI_HOTKEYSCAN_FNEND);
+ hotkey_unmap(TP_ACPI_HOTKEYSCAN_FNHOME);
+ hotkey_unmap(TP_ACPI_HOTKEYSCAN_FNEND);
}
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+ if (tp_features.hotkey_mask) {
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
+ & ~hotkey_all_mask
+ & ~hotkey_reserved_mask;
+ } else {
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
+ & ~hotkey_reserved_mask;
+ }
+
+ vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
+ "hotkey source mask 0x%08x, polling freq %u\n",
+ hotkey_source_mask, hotkey_poll_freq);
+#endif
+
dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"enabling firmware HKEY event interface...\n");
res = hotkey_status_set(true);
tpacpi_inputdev->open = &hotkey_inputdev_open;
tpacpi_inputdev->close = &hotkey_inputdev_close;
- hotkey_poll_setup_safe(1);
+ hotkey_poll_setup_safe(true);
tpacpi_send_radiosw_update();
tpacpi_input_send_tabletsw();
hotkey_tablet_mode_notify_change();
hotkey_wakeup_reason_notify_change();
hotkey_wakeup_hotunplug_complete_notify_change();
- hotkey_poll_setup_safe(0);
+ hotkey_poll_setup_safe(false);
}
/* procfs -------------------------------------------------------------- */
hotkey_enabledisable_warn(0);
res = -EPERM;
} else if (strlencmp(cmd, "reset") == 0) {
- mask = hotkey_orig_mask;
+ mask = (hotkey_all_mask | hotkey_source_mask)
+ & ~hotkey_reserved_mask;
} else if (sscanf(cmd, "0x%x", &mask) == 1) {
/* mask set */
} else if (sscanf(cmd, "%x", &mask) == 1) {
/* Models with ATI GPUs known to require ECNVRAM mode */
TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC), /* T43/p ATI */
- /* Models with ATI GPUs (waiting confirmation) */
- TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+ /* Models with ATI GPUs that can use ECNVRAM */
+ TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
- /* Models with Intel Extreme Graphics 2 (waiting confirmation) */
+ /* Models with Intel Extreme Graphics 2 */
+ TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_NOEC),
TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
- TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
/* Models with Intel GMA900 */
TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC), /* T43, R52 */
/*
* Non-ancient models have better DMI tagging, but very old models
- * don't.
+ * don't. tpacpi_is_fw_known() is a cheat to help in that case.
*/
- is_thinkpad = (thinkpad_id.model_str != NULL);
+ is_thinkpad = (thinkpad_id.model_str != NULL) ||
+ (thinkpad_id.ec_model != 0) ||
+ tpacpi_is_fw_known();
/* ec is required because many other handles are relative to it */
TPACPI_ACPIHANDLE_INIT(ec);
return -ENODEV;
}
- /*
- * Risks a regression on very old machines, but reduces potential
- * false positives a damn great deal
- */
- if (!is_thinkpad)
- is_thinkpad = (thinkpad_id.vendor == PCI_VENDOR_ID_IBM);
-
if (!is_thinkpad && !force_load)
return -ENODEV;
--- /dev/null
+/*
+ * ACPI driver for Topstar notebooks (hotkeys support only)
+ *
+ * Copyright (c) 2009 Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * Implementation inspired by existing x86 platform drivers, in special
+ * asus/eepc/fujitsu-laptop, thanks to their authors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/input.h>
+
+#define ACPI_TOPSTAR_CLASS "topstar"
+
+struct topstar_hkey {
+ struct input_dev *inputdev;
+};
+
+struct tps_key_entry {
+ u8 code;
+ u16 keycode;
+};
+
+static struct tps_key_entry topstar_keymap[] = {
+ { 0x80, KEY_BRIGHTNESSUP },
+ { 0x81, KEY_BRIGHTNESSDOWN },
+ { 0x83, KEY_VOLUMEUP },
+ { 0x84, KEY_VOLUMEDOWN },
+ { 0x85, KEY_MUTE },
+ { 0x86, KEY_SWITCHVIDEOMODE },
+ { 0x87, KEY_F13 }, /* touchpad enable/disable key */
+ { 0x88, KEY_WLAN },
+ { 0x8a, KEY_WWW },
+ { 0x8b, KEY_MAIL },
+ { 0x8c, KEY_MEDIA },
+ { 0x96, KEY_F14 }, /* G key? */
+ { }
+};
+
+static struct tps_key_entry *tps_get_key_by_scancode(int code)
+{
+ struct tps_key_entry *key;
+
+ for (key = topstar_keymap; key->code; key++)
+ if (code == key->code)
+ return key;
+
+ return NULL;
+}
+
+static struct tps_key_entry *tps_get_key_by_keycode(int code)
+{
+ struct tps_key_entry *key;
+
+ for (key = topstar_keymap; key->code; key++)
+ if (code == key->keycode)
+ return key;
+
+ return NULL;
+}
+
+static void acpi_topstar_notify(struct acpi_device *device, u32 event)
+{
+ struct tps_key_entry *key;
+ static bool dup_evnt[2];
+ bool *dup;
+ struct topstar_hkey *hkey = acpi_driver_data(device);
+
+ /* 0x83 and 0x84 key events comes duplicated... */
+ if (event == 0x83 || event == 0x84) {
+ dup = &dup_evnt[event - 0x83];
+ if (*dup) {
+ *dup = false;
+ return;
+ }
+ *dup = true;
+ }
+
+ /*
+ * 'G key' generate two event codes, convert to only
+ * one event/key code for now (3G switch?)
+ */
+ if (event == 0x97)
+ event = 0x96;
+
+ key = tps_get_key_by_scancode(event);
+ if (key) {
+ input_report_key(hkey->inputdev, key->keycode, 1);
+ input_sync(hkey->inputdev);
+ input_report_key(hkey->inputdev, key->keycode, 0);
+ input_sync(hkey->inputdev);
+ return;
+ }
+
+ /* Known non hotkey events don't handled or that we don't care yet */
+ if (event == 0x8e || event == 0x8f || event == 0x90)
+ return;
+
+ pr_info("unknown event = 0x%02x\n", event);
+}
+
+static int acpi_topstar_fncx_switch(struct acpi_device *device, bool state)
+{
+ acpi_status status;
+ union acpi_object fncx_params[1] = {
+ { .type = ACPI_TYPE_INTEGER }
+ };
+ struct acpi_object_list fncx_arg_list = { 1, &fncx_params[0] };
+
+ fncx_params[0].integer.value = state ? 0x86 : 0x87;
+ status = acpi_evaluate_object(device->handle, "FNCX", &fncx_arg_list, NULL);
+ if (ACPI_FAILURE(status)) {
+ pr_err("Unable to switch FNCX notifications\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int topstar_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+{
+ struct tps_key_entry *key = tps_get_key_by_scancode(scancode);
+
+ if (!key)
+ return -EINVAL;
+
+ *keycode = key->keycode;
+ return 0;
+}
+
+static int topstar_setkeycode(struct input_dev *dev, int scancode, int keycode)
+{
+ struct tps_key_entry *key;
+ int old_keycode;
+
+ if (keycode < 0 || keycode > KEY_MAX)
+ return -EINVAL;
+
+ key = tps_get_key_by_scancode(scancode);
+
+ if (!key)
+ return -EINVAL;
+
+ old_keycode = key->keycode;
+ key->keycode = keycode;
+ set_bit(keycode, dev->keybit);
+ if (!tps_get_key_by_keycode(old_keycode))
+ clear_bit(old_keycode, dev->keybit);
+ return 0;
+}
+
+static int acpi_topstar_init_hkey(struct topstar_hkey *hkey)
+{
+ struct tps_key_entry *key;
+
+ hkey->inputdev = input_allocate_device();
+ if (!hkey->inputdev) {
+ pr_err("Unable to allocate input device\n");
+ return -ENODEV;
+ }
+ hkey->inputdev->name = "Topstar Laptop extra buttons";
+ hkey->inputdev->phys = "topstar/input0";
+ hkey->inputdev->id.bustype = BUS_HOST;
+ hkey->inputdev->getkeycode = topstar_getkeycode;
+ hkey->inputdev->setkeycode = topstar_setkeycode;
+ for (key = topstar_keymap; key->code; key++) {
+ set_bit(EV_KEY, hkey->inputdev->evbit);
+ set_bit(key->keycode, hkey->inputdev->keybit);
+ }
+ if (input_register_device(hkey->inputdev)) {
+ pr_err("Unable to register input device\n");
+ input_free_device(hkey->inputdev);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int acpi_topstar_add(struct acpi_device *device)
+{
+ struct topstar_hkey *tps_hkey;
+
+ tps_hkey = kzalloc(sizeof(struct topstar_hkey), GFP_KERNEL);
+ if (!tps_hkey)
+ return -ENOMEM;
+
+ strcpy(acpi_device_name(device), "Topstar TPSACPI");
+ strcpy(acpi_device_class(device), ACPI_TOPSTAR_CLASS);
+
+ if (acpi_topstar_fncx_switch(device, true))
+ goto add_err;
+
+ if (acpi_topstar_init_hkey(tps_hkey))
+ goto add_err;
+
+ device->driver_data = tps_hkey;
+ return 0;
+
+add_err:
+ kfree(tps_hkey);
+ return -ENODEV;
+}
+
+static int acpi_topstar_remove(struct acpi_device *device, int type)
+{
+ struct topstar_hkey *tps_hkey = acpi_driver_data(device);
+
+ acpi_topstar_fncx_switch(device, false);
+
+ input_unregister_device(tps_hkey->inputdev);
+ kfree(tps_hkey);
+
+ return 0;
+}
+
+static const struct acpi_device_id topstar_device_ids[] = {
+ { "TPSACPI01", 0 },
+ { "", 0 },
+};
+MODULE_DEVICE_TABLE(acpi, topstar_device_ids);
+
+static struct acpi_driver acpi_topstar_driver = {
+ .name = "Topstar laptop ACPI driver",
+ .class = ACPI_TOPSTAR_CLASS,
+ .ids = topstar_device_ids,
+ .ops = {
+ .add = acpi_topstar_add,
+ .remove = acpi_topstar_remove,
+ .notify = acpi_topstar_notify,
+ },
+};
+
+static int __init topstar_laptop_init(void)
+{
+ int ret;
+
+ ret = acpi_bus_register_driver(&acpi_topstar_driver);
+ if (ret < 0)
+ return ret;
+
+ printk(KERN_INFO "Topstar Laptop ACPI extras driver loaded\n");
+
+ return 0;
+}
+
+static void __exit topstar_laptop_exit(void)
+{
+ acpi_bus_unregister_driver(&acpi_topstar_driver);
+}
+
+module_init(topstar_laptop_init);
+module_exit(topstar_laptop_exit);
+
+MODULE_AUTHOR("Herton Ronaldo Krzesinski");
+MODULE_DESCRIPTION("Topstar Laptop ACPI Extras driver");
+MODULE_LICENSE("GPL");
#define ACPI_WMI_CLASS "wmi"
-#undef PREFIX
#define PREFIX "ACPI: WMI: "
static DEFINE_MUTEX(wmi_data_lock);
pnpacpi_parse_resource_option_data(dev);
if (device->flags.compatible_ids) {
- struct acpi_compatible_id_list *cid_list = device->pnp.cid_list;
+ struct acpica_device_id_list *cid_list = device->pnp.cid_list;
int i;
for (i = 0; i < cid_list->count; i++) {
- if (!ispnpidacpi(cid_list->id[i].value))
+ if (!ispnpidacpi(cid_list->ids[i].string))
continue;
- pnp_add_id(dev, cid_list->id[i].value);
+ pnp_add_id(dev, cid_list->ids[i].string);
}
}
config THERMAL_HWMON
bool "Hardware monitoring support"
+ depends on THERMAL
depends on HWMON=y || HWMON=THERMAL
help
The generic thermal sysfs driver's hardware monitoring support
#include <acpi/acpi.h>
-#define PREFIX "ACPI: "
-
/* TBD: Make dynamic */
#define ACPI_MAX_HANDLES 10
struct acpi_handle_list {
typedef int (*acpi_op_add) (struct acpi_device * device);
typedef int (*acpi_op_remove) (struct acpi_device * device, int type);
typedef int (*acpi_op_start) (struct acpi_device * device);
-typedef int (*acpi_op_stop) (struct acpi_device * device, int type);
typedef int (*acpi_op_suspend) (struct acpi_device * device,
pm_message_t state);
typedef int (*acpi_op_resume) (struct acpi_device * device);
acpi_op_add add;
acpi_op_remove remove;
acpi_op_start start;
- acpi_op_stop stop;
acpi_op_suspend suspend;
acpi_op_resume resume;
acpi_op_bind bind;
typedef char acpi_bus_id[8];
typedef unsigned long acpi_bus_address;
-typedef char acpi_hardware_id[15];
-typedef char acpi_unique_id[9];
typedef char acpi_device_name[40];
typedef char acpi_device_class[20];
struct acpi_device_pnp {
acpi_bus_id bus_id; /* Object name */
acpi_bus_address bus_address; /* _ADR */
- acpi_hardware_id hardware_id; /* _HID */
- struct acpi_compatible_id_list *cid_list; /* _CIDs */
- acpi_unique_id unique_id; /* _UID */
+ char *hardware_id; /* _HID */
+ struct acpica_device_id_list *cid_list; /* _CIDs */
+ char *unique_id; /* _UID */
acpi_device_name device_name; /* Driver-determined */
acpi_device_class device_class; /* " */
};
extern struct kobject *acpi_kobj;
extern int acpi_bus_generate_netlink_event(const char*, const char*, u8, int);
-void acpi_bus_private_data_handler(acpi_handle, u32, void *);
+void acpi_bus_private_data_handler(acpi_handle, void *);
int acpi_bus_get_private_data(acpi_handle, void **);
extern int acpi_notifier_call_chain(struct acpi_device *, u32, u32);
extern int register_acpi_notifier(struct notifier_block *);
*/
int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device);
-void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context);
+void acpi_bus_data_handler(acpi_handle handle, void *context);
int acpi_bus_get_status(struct acpi_device *device);
int acpi_bus_get_power(acpi_handle handle, int *state);
int acpi_bus_set_power(acpi_handle handle, int state);
acpi_status
acpi_os_validate_address(u8 space_id, acpi_physical_address address,
acpi_size length, char *name);
+acpi_status
+acpi_os_invalidate_address(u8 space_id, acpi_physical_address address,
+ acpi_size length);
u64 acpi_os_get_timer(void);
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20090521
+#define ACPI_CA_VERSION 0x20090903
#include "actypes.h"
#include "actbl.h"
extern u8 acpi_gbl_all_methods_serialized;
extern u8 acpi_gbl_create_osi_method;
extern u8 acpi_gbl_leave_wake_gpes_disabled;
+extern u8 acpi_gbl_use_default_register_widths;
extern acpi_name acpi_gbl_trace_method_name;
extern u32 acpi_gbl_trace_flags;
acpi_object_type return_type);
acpi_status
-acpi_get_object_info(acpi_handle handle, struct acpi_buffer *return_buffer);
+acpi_get_object_info(acpi_handle handle,
+ struct acpi_device_info **return_buffer);
acpi_status acpi_install_method(u8 *buffer);
acpi_status acpi_set_firmware_waking_vector64(u64 physical_address);
#endif
-acpi_status acpi_read(u32 *value, struct acpi_generic_address *reg);
+acpi_status acpi_read(u64 *value, struct acpi_generic_address *reg);
-acpi_status acpi_write(u32 value, struct acpi_generic_address *reg);
+acpi_status acpi_write(u64 value, struct acpi_generic_address *reg);
acpi_status
acpi_get_sleep_type_data(u8 sleep_state, u8 * slp_typ_a, u8 * slp_typ_b);
#ifndef __ACTBL_H__
#define __ACTBL_H__
+/*******************************************************************************
+ *
+ * Fundamental ACPI tables
+ *
+ * This file contains definitions for the ACPI tables that are directly consumed
+ * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
+ * device drivers and other OS support code.
+ *
+ * The RSDP and FACS do not use the common ACPI table header. All other ACPI
+ * tables use the header.
+ *
+ ******************************************************************************/
+
/*
- * Values for description table header signatures. Useful because they make
- * it more difficult to inadvertently type in the wrong signature.
+ * Values for description table header signatures for tables defined in this
+ * file. Useful because they make it more difficult to inadvertently type in
+ * the wrong signature.
*/
#define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */
#define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */
#pragma pack(1)
/*
- * These are the ACPI tables that are directly consumed by the subsystem.
- *
- * The RSDP and FACS do not use the common ACPI table header. All other ACPI
- * tables use the header.
- *
* Note about bitfields: The u8 type is used for bitfields in ACPI tables.
* This is the only type that is even remotely portable. Anything else is not
* portable, so do not use any other bitfield types.
/*******************************************************************************
*
- * ACPI Table Header. This common header is used by all tables except the
- * RSDP and FACS. The define is used for direct inclusion of header into
- * other ACPI tables
+ * Master ACPI Table Header. This common header is used by all ACPI tables
+ * except the RSDP and FACS.
*
******************************************************************************/
u32 asl_compiler_revision; /* ASL compiler version */
};
-/*
+/*******************************************************************************
+ *
* GAS - Generic Address Structure (ACPI 2.0+)
*
* Note: Since this structure is used in the ACPI tables, it is byte aligned.
- * If misalignment is not supported, access to the Address field must be
- * performed with care.
- */
+ * If misaliged access is not supported by the hardware, accesses to the
+ * 64-bit Address field must be performed with care.
+ *
+ ******************************************************************************/
+
struct acpi_generic_address {
u8 space_id; /* Address space where struct or register exists */
u8 bit_width; /* Size in bits of given register */
/*******************************************************************************
*
* RSDP - Root System Description Pointer (Signature is "RSD PTR ")
+ * Version 2
*
******************************************************************************/
/*******************************************************************************
*
* RSDT/XSDT - Root System Description Tables
+ * Version 1 (both)
*
******************************************************************************/
u32 flags;
u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
u8 version; /* Version of this table (ACPI 2.0+) */
- u8 reserved[31]; /* Reserved, must be zero */
+ u8 reserved[3]; /* Reserved, must be zero */
+ u32 ospm_flags; /* Flags to be set by OSPM (ACPI 4.0) */
+ u8 reserved1[24]; /* Reserved, must be zero */
};
-/* Flag macros */
+/* Masks for global_lock flag field above */
-#define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */
+#define ACPI_GLOCK_PENDING (1) /* 00: Pending global lock ownership */
+#define ACPI_GLOCK_OWNED (1<<1) /* 01: Global lock is owned */
-/* Global lock flags */
+/* Masks for Flags field above */
-#define ACPI_GLOCK_PENDING 0x01 /* 00: Pending global lock ownership */
-#define ACPI_GLOCK_OWNED 0x02 /* 01: Global lock is owned */
+#define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */
+#define ACPI_FACS_64BIT_WAKE (1<<1) /* 01: 64-bit wake vector supported (ACPI 4.0) */
+
+/* Masks for ospm_flags field above */
+
+#define ACPI_FACS_64BIT_ENVIRONMENT (1) /* 00: 64-bit wake environment is required (ACPI 4.0) */
/*******************************************************************************
*
* FADT - Fixed ACPI Description Table (Signature "FACP")
+ * Version 4
*
******************************************************************************/
struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */
};
-/* FADT Boot Architecture Flags (boot_flags) */
+/* Masks for FADT Boot Architecture Flags (boot_flags) */
#define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */
#define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */
#define FADT2_REVISION_ID 3
-/* FADT flags */
+/* Masks for FADT flags */
#define ACPI_FADT_WBINVD (1) /* 00: [V1] The wbinvd instruction works properly */
#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] wbinvd flushes but does not invalidate caches */
#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */
-/* FADT Prefered Power Management Profiles */
+/* Values for preferred_profile (Prefered Power Management Profiles) */
enum acpi_prefered_pm_profiles {
PM_UNSPECIFIED = 0,
#define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_fadt, f)
+/*
+ * Internal table-related structures
+ */
union acpi_name_union {
u32 integer;
char ascii[4];
};
-/*
- * Internal ACPI Table Descriptor. One per ACPI table
- */
+/* Internal ACPI Table Descriptor. One per ACPI table. */
+
struct acpi_table_desc {
acpi_physical_address address;
struct acpi_table_header *pointer;
u8 flags;
};
-/* Flags for above */
+/* Masks for Flags field above */
#define ACPI_TABLE_ORIGIN_UNKNOWN (0)
#define ACPI_TABLE_ORIGIN_MAPPED (1)
*/
#include <acpi/actbl1.h>
+#include <acpi/actbl2.h>
#endif /* __ACTBL_H__ */
/*******************************************************************************
*
- * Additional ACPI Tables
+ * Additional ACPI Tables (1)
*
* These tables are not consumed directly by the ACPICA subsystem, but are
* included here to support device drivers and the AML disassembler.
*
+ * The tables in this file are fully defined within the ACPI specification.
+ *
******************************************************************************/
/*
- * Values for description table header signatures. Useful because they make
- * it more difficult to inadvertently type in the wrong signature.
+ * Values for description table header signatures for tables defined in this
+ * file. Useful because they make it more difficult to inadvertently type in
+ * the wrong signature.
*/
-#define ACPI_SIG_ASF "ASF!" /* Alert Standard Format table */
#define ACPI_SIG_BERT "BERT" /* Boot Error Record Table */
-#define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */
#define ACPI_SIG_CPEP "CPEP" /* Corrected Platform Error Polling table */
-#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */
-#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */
#define ACPI_SIG_ECDT "ECDT" /* Embedded Controller Boot Resources Table */
#define ACPI_SIG_EINJ "EINJ" /* Error Injection table */
#define ACPI_SIG_ERST "ERST" /* Error Record Serialization Table */
#define ACPI_SIG_HEST "HEST" /* Hardware Error Source Table */
-#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */
-#define ACPI_SIG_IBFT "IBFT" /* i_sCSI Boot Firmware Table */
#define ACPI_SIG_MADT "APIC" /* Multiple APIC Description Table */
-#define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */
+#define ACPI_SIG_MSCT "MSCT" /* Maximum System Characteristics Table */
#define ACPI_SIG_SBST "SBST" /* Smart Battery Specification Table */
-#define ACPI_SIG_SLIC "SLIC" /* Software Licensing Description Table */
#define ACPI_SIG_SLIT "SLIT" /* System Locality Distance Information Table */
-#define ACPI_SIG_SPCR "SPCR" /* Serial Port Console Redirection table */
-#define ACPI_SIG_SPMI "SPMI" /* Server Platform Management Interface table */
#define ACPI_SIG_SRAT "SRAT" /* System Resource Affinity Table */
-#define ACPI_SIG_TCPA "TCPA" /* Trusted Computing Platform Alliance table */
-#define ACPI_SIG_UEFI "UEFI" /* Uefi Boot Optimization Table */
-#define ACPI_SIG_WDAT "WDAT" /* Watchdog Action Table */
-#define ACPI_SIG_WDRT "WDRT" /* Watchdog Resource Table */
/*
* All tables must be byte-packed to match the ACPI specification, since
* portable, so do not use any other bitfield types.
*/
-/* Common Subtable header (used in MADT, SRAT, etc.) */
+/*******************************************************************************
+ *
+ * Common subtable headers
+ *
+ ******************************************************************************/
+
+/* Generic subtable header (used in MADT, SRAT, etc.) */
struct acpi_subtable_header {
u8 type;
u8 length;
};
-/* Common Subtable header for WHEA tables (EINJ, ERST, WDAT) */
+/* Subtable header for WHEA tables (EINJ, ERST, WDAT) */
struct acpi_whea_header {
u8 action;
/*******************************************************************************
*
- * ASF - Alert Standard Format table (Signature "ASF!")
- *
- * Conforms to the Alert Standard Format Specification V2.0, 23 April 2003
- *
- ******************************************************************************/
-
-struct acpi_table_asf {
- struct acpi_table_header header; /* Common ACPI table header */
-};
-
-/* ASF subtable header */
-
-struct acpi_asf_header {
- u8 type;
- u8 reserved;
- u16 length;
-};
-
-/* Values for Type field above */
-
-enum acpi_asf_type {
- ACPI_ASF_TYPE_INFO = 0,
- ACPI_ASF_TYPE_ALERT = 1,
- ACPI_ASF_TYPE_CONTROL = 2,
- ACPI_ASF_TYPE_BOOT = 3,
- ACPI_ASF_TYPE_ADDRESS = 4,
- ACPI_ASF_TYPE_RESERVED = 5
-};
-
-/*
- * ASF subtables
- */
-
-/* 0: ASF Information */
-
-struct acpi_asf_info {
- struct acpi_asf_header header;
- u8 min_reset_value;
- u8 min_poll_interval;
- u16 system_id;
- u32 mfg_id;
- u8 flags;
- u8 reserved2[3];
-};
-
-/* 1: ASF Alerts */
-
-struct acpi_asf_alert {
- struct acpi_asf_header header;
- u8 assert_mask;
- u8 deassert_mask;
- u8 alerts;
- u8 data_length;
-};
-
-struct acpi_asf_alert_data {
- u8 address;
- u8 command;
- u8 mask;
- u8 value;
- u8 sensor_type;
- u8 type;
- u8 offset;
- u8 source_type;
- u8 severity;
- u8 sensor_number;
- u8 entity;
- u8 instance;
-};
-
-/* 2: ASF Remote Control */
-
-struct acpi_asf_remote {
- struct acpi_asf_header header;
- u8 controls;
- u8 data_length;
- u16 reserved2;
-};
-
-struct acpi_asf_control_data {
- u8 function;
- u8 address;
- u8 command;
- u8 value;
-};
-
-/* 3: ASF RMCP Boot Options */
-
-struct acpi_asf_rmcp {
- struct acpi_asf_header header;
- u8 capabilities[7];
- u8 completion_code;
- u32 enterprise_id;
- u8 command;
- u16 parameter;
- u16 boot_options;
- u16 oem_parameters;
-};
-
-/* 4: ASF Address */
-
-struct acpi_asf_address {
- struct acpi_asf_header header;
- u8 eprom_address;
- u8 devices;
-};
-
-/*******************************************************************************
- *
- * BERT - Boot Error Record Table
+ * BERT - Boot Error Record Table (ACPI 4.0)
+ * Version 1
*
******************************************************************************/
u64 address; /* Physical addresss of the error region */
};
-/* Boot Error Region */
+/* Boot Error Region (not a subtable, pointed to by Address field above) */
struct acpi_bert_region {
- u32 block_status;
- u32 raw_data_offset;
- u32 raw_data_length;
- u32 data_length;
- u32 error_severity;
+ u32 block_status; /* Type of error information */
+ u32 raw_data_offset; /* Offset to raw error data */
+ u32 raw_data_length; /* Length of raw error data */
+ u32 data_length; /* Length of generic error data */
+ u32 error_severity; /* Severity code */
};
-/* block_status Flags */
+/* Values for block_status flags above */
#define ACPI_BERT_UNCORRECTABLE (1)
-#define ACPI_BERT_CORRECTABLE (2)
-#define ACPI_BERT_MULTIPLE_UNCORRECTABLE (4)
-#define ACPI_BERT_MULTIPLE_CORRECTABLE (8)
+#define ACPI_BERT_CORRECTABLE (1<<1)
+#define ACPI_BERT_MULTIPLE_UNCORRECTABLE (1<<2)
+#define ACPI_BERT_MULTIPLE_CORRECTABLE (1<<3)
+#define ACPI_BERT_ERROR_ENTRY_COUNT (0xFF<<4) /* 8 bits, error count */
-/*******************************************************************************
- *
- * BOOT - Simple Boot Flag Table
- *
- ******************************************************************************/
+/* Values for error_severity above */
-struct acpi_table_boot {
- struct acpi_table_header header; /* Common ACPI table header */
- u8 cmos_index; /* Index in CMOS RAM for the boot register */
- u8 reserved[3];
+enum acpi_bert_error_severity {
+ ACPI_BERT_ERROR_CORRECTABLE = 0,
+ ACPI_BERT_ERROR_FATAL = 1,
+ ACPI_BERT_ERROR_CORRECTED = 2,
+ ACPI_BERT_ERROR_NONE = 3,
+ ACPI_BERT_ERROR_RESERVED = 4 /* 4 and greater are reserved */
};
+/*
+ * Note: The generic error data that follows the error_severity field above
+ * uses the struct acpi_hest_generic_data defined under the HEST table below
+ */
+
/*******************************************************************************
*
- * CPEP - Corrected Platform Error Polling table
+ * CPEP - Corrected Platform Error Polling table (ACPI 4.0)
+ * Version 1
*
******************************************************************************/
/* Subtable */
struct acpi_cpep_polling {
- u8 type;
- u8 length;
+ struct acpi_subtable_header header;
u8 id; /* Processor ID */
u8 eid; /* Processor EID */
u32 interval; /* Polling interval (msec) */
/*******************************************************************************
*
- * DBGP - Debug Port table
- *
- ******************************************************************************/
-
-struct acpi_table_dbgp {
- struct acpi_table_header header; /* Common ACPI table header */
- u8 type; /* 0=full 16550, 1=subset of 16550 */
- u8 reserved[3];
- struct acpi_generic_address debug_port;
-};
-
-/*******************************************************************************
- *
- * DMAR - DMA Remapping table
- * From "Intel Virtualization Technology for Directed I/O", Sept. 2007
- *
- ******************************************************************************/
-
-struct acpi_table_dmar {
- struct acpi_table_header header; /* Common ACPI table header */
- u8 width; /* Host Address Width */
- u8 flags;
- u8 reserved[10];
-};
-
-/* Flags */
-
-#define ACPI_DMAR_INTR_REMAP (1)
-
-/* DMAR subtable header */
-
-struct acpi_dmar_header {
- u16 type;
- u16 length;
-};
-
-/* Values for subtable type in struct acpi_dmar_header */
-
-enum acpi_dmar_type {
- ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,
- ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,
- ACPI_DMAR_TYPE_ATSR = 2,
- ACPI_DMAR_TYPE_RESERVED = 3 /* 3 and greater are reserved */
-};
-
-struct acpi_dmar_device_scope {
- u8 entry_type;
- u8 length;
- u16 reserved;
- u8 enumeration_id;
- u8 bus;
-};
-
-/* Values for entry_type in struct acpi_dmar_device_scope */
-
-enum acpi_dmar_scope_type {
- ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0,
- ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1,
- ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2,
- ACPI_DMAR_SCOPE_TYPE_IOAPIC = 3,
- ACPI_DMAR_SCOPE_TYPE_HPET = 4,
- ACPI_DMAR_SCOPE_TYPE_RESERVED = 5 /* 5 and greater are reserved */
-};
-
-struct acpi_dmar_pci_path {
- u8 dev;
- u8 fn;
-};
-
-/*
- * DMAR Sub-tables, correspond to Type in struct acpi_dmar_header
- */
-
-/* 0: Hardware Unit Definition */
-
-struct acpi_dmar_hardware_unit {
- struct acpi_dmar_header header;
- u8 flags;
- u8 reserved;
- u16 segment;
- u64 address; /* Register Base Address */
-};
-
-/* Flags */
-
-#define ACPI_DMAR_INCLUDE_ALL (1)
-
-/* 1: Reserved Memory Defininition */
-
-struct acpi_dmar_reserved_memory {
- struct acpi_dmar_header header;
- u16 reserved;
- u16 segment;
- u64 base_address; /* 4_k aligned base address */
- u64 end_address; /* 4_k aligned limit address */
-};
-
-/* Flags */
-
-#define ACPI_DMAR_ALLOW_ALL (1)
-
-
-/* 2: Root Port ATS Capability Reporting Structure */
-
-struct acpi_dmar_atsr {
- struct acpi_dmar_header header;
- u8 flags;
- u8 reserved;
- u16 segment;
-};
-
-/* Flags */
-
-#define ACPI_DMAR_ALL_PORTS (1)
-
-/*******************************************************************************
- *
* ECDT - Embedded Controller Boot Resources Table
+ * Version 1
*
******************************************************************************/
/*******************************************************************************
*
- * EINJ - Error Injection Table
+ * EINJ - Error Injection Table (ACPI 4.0)
+ * Version 1
*
******************************************************************************/
struct acpi_table_einj {
struct acpi_table_header header; /* Common ACPI table header */
u32 header_length;
- u32 reserved;
+ u8 flags;
+ u8 reserved[3];
u32 entries;
};
struct acpi_whea_header whea_header; /* Common header for WHEA tables */
};
+/* Masks for Flags field above */
+
+#define ACPI_EINJ_PRESERVE (1)
+
/* Values for Action field above */
enum acpi_einj_actions {
u32 entry_count;
};
+/* Command status return values */
+
+enum acpi_einj_command_status {
+ ACPI_EINJ_SUCCESS = 0,
+ ACPI_EINJ_FAILURE = 1,
+ ACPI_EINJ_INVALID_ACCESS = 2,
+ ACPI_EINJ_STATUS_RESERVED = 3 /* 3 and greater are reserved */
+};
+
+/* Error types returned from ACPI_EINJ_GET_ERROR_TYPE (bitfield) */
+
+#define ACPI_EINJ_PROCESSOR_CORRECTABLE (1)
+#define ACPI_EINJ_PROCESSOR_UNCORRECTABLE (1<<1)
+#define ACPI_EINJ_PROCESSOR_FATAL (1<<2)
+#define ACPI_EINJ_MEMORY_CORRECTABLE (1<<3)
+#define ACPI_EINJ_MEMORY_UNCORRECTABLE (1<<4)
+#define ACPI_EINJ_MEMORY_FATAL (1<<5)
+#define ACPI_EINJ_PCIX_CORRECTABLE (1<<6)
+#define ACPI_EINJ_PCIX_UNCORRECTABLE (1<<7)
+#define ACPI_EINJ_PCIX_FATAL (1<<8)
+#define ACPI_EINJ_PLATFORM_CORRECTABLE (1<<9)
+#define ACPI_EINJ_PLATFORM_UNCORRECTABLE (1<<10)
+#define ACPI_EINJ_PLATFORM_FATAL (1<<11)
+
/*******************************************************************************
*
- * ERST - Error Record Serialization Table
+ * ERST - Error Record Serialization Table (ACPI 4.0)
+ * Version 1
*
******************************************************************************/
struct acpi_whea_header whea_header; /* Common header for WHEA tables */
};
+/* Masks for Flags field above */
+
+#define ACPI_ERST_PRESERVE (1)
+
/* Values for Action field above */
enum acpi_erst_actions {
- ACPI_ERST_BEGIN_WRITE_OPERATION = 0,
- ACPI_ERST_BEGIN_READ_OPERATION = 1,
- ACPI_ERST_BETGIN_CLEAR_OPERATION = 2,
- ACPI_ERST_END_OPERATION = 3,
+ ACPI_ERST_BEGIN_WRITE = 0,
+ ACPI_ERST_BEGIN_READ = 1,
+ ACPI_ERST_BEGIN_CLEAR = 2,
+ ACPI_ERST_END = 3,
ACPI_ERST_SET_RECORD_OFFSET = 4,
ACPI_ERST_EXECUTE_OPERATION = 5,
ACPI_ERST_CHECK_BUSY_STATUS = 6,
ACPI_ERST_GET_COMMAND_STATUS = 7,
- ACPI_ERST_GET_RECORD_IDENTIFIER = 8,
- ACPI_ERST_SET_RECORD_IDENTIFIER = 9,
+ ACPI_ERST_GET_RECORD_ID = 8,
+ ACPI_ERST_SET_RECORD_ID = 9,
ACPI_ERST_GET_RECORD_COUNT = 10,
ACPI_ERST_BEGIN_DUMMY_WRIITE = 11,
ACPI_ERST_NOT_USED = 12,
ACPI_ERST_INSTRUCTION_RESERVED = 19 /* 19 and greater are reserved */
};
+/* Command status return values */
+
+enum acpi_erst_command_status {
+ ACPI_ERST_SUCESS = 0,
+ ACPI_ERST_NO_SPACE = 1,
+ ACPI_ERST_NOT_AVAILABLE = 2,
+ ACPI_ERST_FAILURE = 3,
+ ACPI_ERST_RECORD_EMPTY = 4,
+ ACPI_ERST_NOT_FOUND = 5,
+ ACPI_ERST_STATUS_RESERVED = 6 /* 6 and greater are reserved */
+};
+
+/* Error Record Serialization Information */
+
+struct acpi_erst_info {
+ u16 signature; /* Should be "ER" */
+ u8 data[48];
+};
+
/*******************************************************************************
*
- * HEST - Hardware Error Source Table
+ * HEST - Hardware Error Source Table (ACPI 4.0)
+ * Version 1
*
******************************************************************************/
struct acpi_hest_header {
u16 type;
+ u16 source_id;
};
/* Values for Type field above for subtables */
enum acpi_hest_types {
- ACPI_HEST_TYPE_XPF_MACHINE_CHECK = 0,
- ACPI_HEST_TYPE_XPF_CORRECTED_MACHINE_CHECK = 1,
- ACPI_HEST_TYPE_XPF_UNUSED = 2,
- ACPI_HEST_TYPE_XPF_NON_MASKABLE_INTERRUPT = 3,
- ACPI_HEST_TYPE_IPF_CORRECTED_MACHINE_CHECK = 4,
- ACPI_HEST_TYPE_IPF_CORRECTED_PLATFORM_ERROR = 5,
+ ACPI_HEST_TYPE_IA32_CHECK = 0,
+ ACPI_HEST_TYPE_IA32_CORRECTED_CHECK = 1,
+ ACPI_HEST_TYPE_IA32_NMI = 2,
+ ACPI_HEST_TYPE_NOT_USED3 = 3,
+ ACPI_HEST_TYPE_NOT_USED4 = 4,
+ ACPI_HEST_TYPE_NOT_USED5 = 5,
ACPI_HEST_TYPE_AER_ROOT_PORT = 6,
ACPI_HEST_TYPE_AER_ENDPOINT = 7,
ACPI_HEST_TYPE_AER_BRIDGE = 8,
- ACPI_HEST_TYPE_GENERIC_HARDWARE_ERROR_SOURCE = 9,
+ ACPI_HEST_TYPE_GENERIC_ERROR = 9,
ACPI_HEST_TYPE_RESERVED = 10 /* 10 and greater are reserved */
};
/*
- * HEST Sub-subtables
+ * HEST substructures contained in subtables
*/
-/* XPF Machine Check Error Bank */
-
-struct acpi_hest_xpf_error_bank {
+/*
+ * IA32 Error Bank(s) - Follows the struct acpi_hest_ia_machine_check and
+ * struct acpi_hest_ia_corrected structures.
+ */
+struct acpi_hest_ia_error_bank {
u8 bank_number;
u8 clear_status_on_init;
u8 status_format;
- u8 config_write_enable;
+ u8 reserved;
u32 control_register;
- u64 control_init_data;
+ u64 control_data;
u32 status_register;
u32 address_register;
u32 misc_register;
};
-/* Generic Error Status */
-
-struct acpi_hest_generic_status {
- u32 block_status;
- u32 raw_data_offset;
- u32 raw_data_length;
- u32 data_length;
- u32 error_severity;
-};
-
-/* Generic Error Data */
-
-struct acpi_hest_generic_data {
- u8 section_type[16];
- u32 error_severity;
- u16 revision;
- u8 validation_bits;
- u8 flags;
- u32 error_data_length;
- u8 fru_id[16];
- u8 fru_text[20];
-};
-
-/* Common HEST structure for PCI/AER types below (6,7,8) */
+/* Common HEST sub-structure for PCI/AER structures below (6,7,8) */
struct acpi_hest_aer_common {
- u16 source_id;
- u16 config_write_enable;
+ u16 reserved1;
u8 flags;
u8 enabled;
- u32 records_to_pre_allocate;
+ u32 records_to_preallocate;
u32 max_sections_per_record;
u32 bus;
u16 device;
u16 function;
u16 device_control;
- u16 reserved;
- u32 uncorrectable_error_mask;
- u32 uncorrectable_error_severity;
- u32 correctable_error_mask;
- u32 advanced_error_capabilities;
+ u16 reserved2;
+ u32 uncorrectable_mask;
+ u32 uncorrectable_severity;
+ u32 correctable_mask;
+ u32 advanced_capabilities;
};
+/* Masks for HEST Flags fields */
+
+#define ACPI_HEST_FIRMWARE_FIRST (1)
+#define ACPI_HEST_GLOBAL (1<<1)
+
/* Hardware Error Notification */
struct acpi_hest_notify {
ACPI_HEST_NOTIFY_RESERVED = 5 /* 5 and greater are reserved */
};
+/* Values for config_write_enable bitfield above */
+
+#define ACPI_HEST_TYPE (1)
+#define ACPI_HEST_POLL_INTERVAL (1<<1)
+#define ACPI_HEST_POLL_THRESHOLD_VALUE (1<<2)
+#define ACPI_HEST_POLL_THRESHOLD_WINDOW (1<<3)
+#define ACPI_HEST_ERR_THRESHOLD_VALUE (1<<4)
+#define ACPI_HEST_ERR_THRESHOLD_WINDOW (1<<5)
+
/*
* HEST subtables
- *
- * From WHEA Design Document, 16 May 2007.
- * Note: There is no subtable type 2 in this version of the document,
- * and there are two different subtable type 3s.
*/
- /* 0: XPF Machine Check Exception */
+/* 0: IA32 Machine Check Exception */
-struct acpi_hest_xpf_machine_check {
+struct acpi_hest_ia_machine_check {
struct acpi_hest_header header;
- u16 source_id;
- u16 config_write_enable;
+ u16 reserved1;
u8 flags;
- u8 reserved1;
- u32 records_to_pre_allocate;
+ u8 enabled;
+ u32 records_to_preallocate;
u32 max_sections_per_record;
u64 global_capability_data;
u64 global_control_data;
u8 num_hardware_banks;
- u8 reserved2[7];
+ u8 reserved3[7];
};
-/* 1: XPF Corrected Machine Check */
+/* 1: IA32 Corrected Machine Check */
-struct acpi_table_hest_xpf_corrected {
+struct acpi_hest_ia_corrected {
struct acpi_hest_header header;
- u16 source_id;
- u16 config_write_enable;
+ u16 reserved1;
u8 flags;
u8 enabled;
- u32 records_to_pre_allocate;
+ u32 records_to_preallocate;
u32 max_sections_per_record;
struct acpi_hest_notify notify;
u8 num_hardware_banks;
- u8 reserved[3];
+ u8 reserved2[3];
};
-/* 3: XPF Non-Maskable Interrupt */
+/* 2: IA32 Non-Maskable Interrupt */
-struct acpi_hest_xpf_nmi {
+struct acpi_hest_ia_nmi {
struct acpi_hest_header header;
- u16 source_id;
u32 reserved;
- u32 records_to_pre_allocate;
+ u32 records_to_preallocate;
u32 max_sections_per_record;
u32 max_raw_data_length;
};
-/* 4: IPF Corrected Machine Check */
-
-struct acpi_hest_ipf_corrected {
- struct acpi_hest_header header;
- u8 enabled;
- u8 reserved;
-};
-
-/* 5: IPF Corrected Platform Error */
-
-struct acpi_hest_ipf_corrected_platform {
- struct acpi_hest_header header;
- u8 enabled;
- u8 reserved;
-};
+/* 3,4,5: Not used */
/* 6: PCI Express Root Port AER */
struct acpi_hest_aer_bridge {
struct acpi_hest_header header;
struct acpi_hest_aer_common aer;
- u32 secondary_uncorrectable_error_mask;
- u32 secondary_uncorrectable_error_severity;
- u32 secondary_advanced_capabilities;
+ u32 uncorrectable_mask2;
+ u32 uncorrectable_severity2;
+ u32 advanced_capabilities2;
};
/* 9: Generic Hardware Error Source */
struct acpi_hest_generic {
struct acpi_hest_header header;
- u16 source_id;
u16 related_source_id;
- u8 config_write_enable;
+ u8 reserved;
u8 enabled;
- u32 records_to_pre_allocate;
+ u32 records_to_preallocate;
u32 max_sections_per_record;
u32 max_raw_data_length;
struct acpi_generic_address error_status_address;
struct acpi_hest_notify notify;
- u32 error_status_block_length;
+ u32 error_block_length;
};
-/*******************************************************************************
- *
- * HPET - High Precision Event Timer table
- *
- ******************************************************************************/
+/* Generic Error Status block */
-struct acpi_table_hpet {
- struct acpi_table_header header; /* Common ACPI table header */
- u32 id; /* Hardware ID of event timer block */
- struct acpi_generic_address address; /* Address of event timer block */
- u8 sequence; /* HPET sequence number */
- u16 minimum_tick; /* Main counter min tick, periodic mode */
- u8 flags;
+struct acpi_hest_generic_status {
+ u32 block_status;
+ u32 raw_data_offset;
+ u32 raw_data_length;
+ u32 data_length;
+ u32 error_severity;
};
-/*! Flags */
+/* Values for block_status flags above */
-#define ACPI_HPET_PAGE_PROTECT (1) /* 00: No page protection */
-#define ACPI_HPET_PAGE_PROTECT_4 (1<<1) /* 01: 4KB page protected */
-#define ACPI_HPET_PAGE_PROTECT_64 (1<<2) /* 02: 64KB page protected */
+#define ACPI_HEST_UNCORRECTABLE (1)
+#define ACPI_HEST_CORRECTABLE (1<<1)
+#define ACPI_HEST_MULTIPLE_UNCORRECTABLE (1<<2)
+#define ACPI_HEST_MULTIPLE_CORRECTABLE (1<<3)
+#define ACPI_HEST_ERROR_ENTRY_COUNT (0xFF<<4) /* 8 bits, error count */
-/*! [End] no source code translation !*/
+/* Generic Error Data entry */
-/*******************************************************************************
- *
- * IBFT - Boot Firmware Table
- *
- ******************************************************************************/
-
-struct acpi_table_ibft {
- struct acpi_table_header header; /* Common ACPI table header */
- u8 reserved[12];
-};
-
-/* IBFT common subtable header */
-
-struct acpi_ibft_header {
- u8 type;
- u8 version;
- u16 length;
- u8 index;
+struct acpi_hest_generic_data {
+ u8 section_type[16];
+ u32 error_severity;
+ u16 revision;
+ u8 validation_bits;
u8 flags;
-};
-
-/* Values for Type field above */
-
-enum acpi_ibft_type {
- ACPI_IBFT_TYPE_NOT_USED = 0,
- ACPI_IBFT_TYPE_CONTROL = 1,
- ACPI_IBFT_TYPE_INITIATOR = 2,
- ACPI_IBFT_TYPE_NIC = 3,
- ACPI_IBFT_TYPE_TARGET = 4,
- ACPI_IBFT_TYPE_EXTENSIONS = 5,
- ACPI_IBFT_TYPE_RESERVED = 6 /* 6 and greater are reserved */
-};
-
-/* IBFT subtables */
-
-struct acpi_ibft_control {
- struct acpi_ibft_header header;
- u16 extensions;
- u16 initiator_offset;
- u16 nic0_offset;
- u16 target0_offset;
- u16 nic1_offset;
- u16 target1_offset;
-};
-
-struct acpi_ibft_initiator {
- struct acpi_ibft_header header;
- u8 sns_server[16];
- u8 slp_server[16];
- u8 primary_server[16];
- u8 secondary_server[16];
- u16 name_length;
- u16 name_offset;
-};
-
-struct acpi_ibft_nic {
- struct acpi_ibft_header header;
- u8 ip_address[16];
- u8 subnet_mask_prefix;
- u8 origin;
- u8 gateway[16];
- u8 primary_dns[16];
- u8 secondary_dns[16];
- u8 dhcp[16];
- u16 vlan;
- u8 mac_address[6];
- u16 pci_address;
- u16 name_length;
- u16 name_offset;
-};
-
-struct acpi_ibft_target {
- struct acpi_ibft_header header;
- u8 target_ip_address[16];
- u16 target_ip_socket;
- u8 target_boot_lun[8];
- u8 chap_type;
- u8 nic_association;
- u16 target_name_length;
- u16 target_name_offset;
- u16 chap_name_length;
- u16 chap_name_offset;
- u16 chap_secret_length;
- u16 chap_secret_offset;
- u16 reverse_chap_name_length;
- u16 reverse_chap_name_offset;
- u16 reverse_chap_secret_length;
- u16 reverse_chap_secret_offset;
+ u32 error_data_length;
+ u8 fru_id[16];
+ u8 fru_text[20];
};
/*******************************************************************************
*
* MADT - Multiple APIC Description Table
+ * Version 3
*
******************************************************************************/
u32 flags;
};
-/* Flags */
+/* Masks for Flags field above */
-#define ACPI_MADT_PCAT_COMPAT (1) /* 00: System also has dual 8259s */
+#define ACPI_MADT_PCAT_COMPAT (1) /* 00: System also has dual 8259s */
/* Values for PCATCompat flag */
#define ACPI_MADT_DUAL_PIC 0
#define ACPI_MADT_MULTIPLE_APIC 1
-/* Values for subtable type in struct acpi_subtable_header */
+/* Values for MADT subtable type in struct acpi_subtable_header */
enum acpi_madt_type {
ACPI_MADT_TYPE_LOCAL_APIC = 0,
u32 flags; /* Interrupt Source Flags */
};
-/* Flags field above */
+/* Masks for Flags field above */
#define ACPI_MADT_CPEI_OVERRIDE (1)
-/* 9: Processor Local X2_APIC (07/2008) */
+/* 9: Processor Local X2APIC (ACPI 4.0) */
struct acpi_madt_local_x2apic {
struct acpi_subtable_header header;
u32 uid; /* ACPI processor UID */
};
-/* 10: Local X2APIC NMI (07/2008) */
+/* 10: Local X2APIC NMI (ACPI 4.0) */
struct acpi_madt_local_x2apic_nmi {
struct acpi_subtable_header header;
/*******************************************************************************
*
- * MCFG - PCI Memory Mapped Configuration table and sub-table
+ * MSCT - Maximum System Characteristics Table (ACPI 4.0)
+ * Version 1
*
******************************************************************************/
-struct acpi_table_mcfg {
+struct acpi_table_msct {
struct acpi_table_header header; /* Common ACPI table header */
- u8 reserved[8];
+ u32 proximity_offset; /* Location of proximity info struct(s) */
+ u32 max_proximity_domains; /* Max number of proximity domains */
+ u32 max_clock_domains; /* Max number of clock domains */
+ u64 max_address; /* Max physical address in system */
};
-/* Subtable */
+/* Subtable - Maximum Proximity Domain Information. Version 1 */
-struct acpi_mcfg_allocation {
- u64 address; /* Base address, processor-relative */
- u16 pci_segment; /* PCI segment group number */
- u8 start_bus_number; /* Starting PCI Bus number */
- u8 end_bus_number; /* Final PCI Bus number */
- u32 reserved;
+struct acpi_msct_proximity {
+ u8 revision;
+ u8 length;
+ u32 range_start; /* Start of domain range */
+ u32 range_end; /* End of domain range */
+ u32 processor_capacity;
+ u64 memory_capacity; /* In bytes */
};
/*******************************************************************************
*
* SBST - Smart Battery Specification Table
+ * Version 1
*
******************************************************************************/
/*******************************************************************************
*
* SLIT - System Locality Distance Information Table
+ * Version 1
*
******************************************************************************/
/*******************************************************************************
*
- * SPCR - Serial Port Console Redirection table
- *
- ******************************************************************************/
-
-struct acpi_table_spcr {
- struct acpi_table_header header; /* Common ACPI table header */
- u8 interface_type; /* 0=full 16550, 1=subset of 16550 */
- u8 reserved[3];
- struct acpi_generic_address serial_port;
- u8 interrupt_type;
- u8 pc_interrupt;
- u32 interrupt;
- u8 baud_rate;
- u8 parity;
- u8 stop_bits;
- u8 flow_control;
- u8 terminal_type;
- u8 reserved1;
- u16 pci_device_id;
- u16 pci_vendor_id;
- u8 pci_bus;
- u8 pci_device;
- u8 pci_function;
- u32 pci_flags;
- u8 pci_segment;
- u32 reserved2;
-};
-
-/*******************************************************************************
- *
- * SPMI - Server Platform Management Interface table
- *
- ******************************************************************************/
-
-struct acpi_table_spmi {
- struct acpi_table_header header; /* Common ACPI table header */
- u8 reserved;
- u8 interface_type;
- u16 spec_revision; /* Version of IPMI */
- u8 interrupt_type;
- u8 gpe_number; /* GPE assigned */
- u8 reserved1;
- u8 pci_device_flag;
- u32 interrupt;
- struct acpi_generic_address ipmi_register;
- u8 pci_segment;
- u8 pci_bus;
- u8 pci_device;
- u8 pci_function;
-};
-
-/*******************************************************************************
- *
* SRAT - System Resource Affinity Table
+ * Version 3
*
******************************************************************************/
u32 reserved; /* Reserved, must be zero */
};
+/* Flags */
+
+#define ACPI_SRAT_CPU_USE_AFFINITY (1) /* 00: Use affinity structure */
+
/* 1: Memory Affinity */
struct acpi_srat_mem_affinity {
#define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1) /* 01: Memory region is hot pluggable */
#define ACPI_SRAT_MEM_NON_VOLATILE (1<<2) /* 02: Memory region is non-volatile */
-/* 2: Processor Local X2_APIC Affinity (07/2008) */
+/* 2: Processor Local X2_APIC Affinity (ACPI 4.0) */
struct acpi_srat_x2apic_cpu_affinity {
struct acpi_subtable_header header;
u32 proximity_domain;
u32 apic_id;
u32 flags;
+ u32 clock_domain;
+ u32 reserved2;
};
/* Flags for struct acpi_srat_cpu_affinity and struct acpi_srat_x2apic_cpu_affinity */
#define ACPI_SRAT_CPU_ENABLED (1) /* 00: Use affinity structure */
-/*******************************************************************************
- *
- * TCPA - Trusted Computing Platform Alliance table
- *
- ******************************************************************************/
-
-struct acpi_table_tcpa {
- struct acpi_table_header header; /* Common ACPI table header */
- u16 reserved;
- u32 max_log_length; /* Maximum length for the event log area */
- u64 log_address; /* Address of the event log area */
-};
-
-/*******************************************************************************
- *
- * UEFI - UEFI Boot optimization Table
- *
- ******************************************************************************/
-
-struct acpi_table_uefi {
- struct acpi_table_header header; /* Common ACPI table header */
- u8 identifier[16]; /* UUID identifier */
- u16 data_offset; /* Offset of remaining data in table */
- u8 data;
-};
-
-/*******************************************************************************
- *
- * WDAT - Watchdog Action Table
- *
- ******************************************************************************/
-
-struct acpi_table_wdat {
- struct acpi_table_header header; /* Common ACPI table header */
- u32 header_length; /* Watchdog Header Length */
- u16 pci_segment; /* PCI Segment number */
- u8 pci_bus; /* PCI Bus number */
- u8 pci_device; /* PCI Device number */
- u8 pci_function; /* PCI Function number */
- u8 reserved[3];
- u32 timer_period; /* Period of one timer count (msec) */
- u32 max_count; /* Maximum counter value supported */
- u32 min_count; /* Minimum counter value */
- u8 flags;
- u8 reserved2[3];
- u32 entries; /* Number of watchdog entries that follow */
-};
-
-/* WDAT Instruction Entries (actions) */
-
-struct acpi_wdat_entry {
- struct acpi_whea_header whea_header; /* Common header for WHEA tables */
-};
-
-/* Values for Action field above */
-
-enum acpi_wdat_actions {
- ACPI_WDAT_RESET = 1,
- ACPI_WDAT_GET_CURRENT_COUNTDOWN = 4,
- ACPI_WDAT_GET_COUNTDOWN = 5,
- ACPI_WDAT_SET_COUNTDOWN = 6,
- ACPI_WDAT_GET_RUNNING_STATE = 8,
- ACPI_WDAT_SET_RUNNING_STATE = 9,
- ACPI_WDAT_GET_STOPPED_STATE = 10,
- ACPI_WDAT_SET_STOPPED_STATE = 11,
- ACPI_WDAT_GET_REBOOT = 16,
- ACPI_WDAT_SET_REBOOT = 17,
- ACPI_WDAT_GET_SHUTDOWN = 18,
- ACPI_WDAT_SET_SHUTDOWN = 19,
- ACPI_WDAT_GET_STATUS = 32,
- ACPI_WDAT_SET_STATUS = 33,
- ACPI_WDAT_ACTION_RESERVED = 34 /* 34 and greater are reserved */
-};
-
-/* Values for Instruction field above */
-
-enum acpi_wdat_instructions {
- ACPI_WDAT_READ_VALUE = 0,
- ACPI_WDAT_READ_COUNTDOWN = 1,
- ACPI_WDAT_WRITE_VALUE = 2,
- ACPI_WDAT_WRITE_COUNTDOWN = 3,
- ACPI_WDAT_INSTRUCTION_RESERVED = 4, /* 4 and greater are reserved */
- ACPI_WDAT_PRESERVE_REGISTER = 0x80 /* Except for this value */
-};
-
-/*******************************************************************************
- *
- * WDRT - Watchdog Resource Table
- *
- ******************************************************************************/
-
-struct acpi_table_wdrt {
- struct acpi_table_header header; /* Common ACPI table header */
- u32 header_length; /* Watchdog Header Length */
- u8 pci_segment; /* PCI Segment number */
- u8 pci_bus; /* PCI Bus number */
- u8 pci_device; /* PCI Device number */
- u8 pci_function; /* PCI Function number */
- u32 timer_period; /* Period of one timer count (msec) */
- u32 max_count; /* Maximum counter value supported */
- u32 min_count; /* Minimum counter value */
- u8 flags;
- u8 reserved[3];
- u32 entries; /* Number of watchdog entries that follow */
-};
-
-/* Flags */
-
-#define ACPI_WDRT_TIMER_ENABLED (1) /* 00: Timer enabled */
-
/* Reset to default packing */
#pragma pack()
--- /dev/null
+#ifndef __ACTBL2_H__
+#define __ACTBL2_H__
+
+/*******************************************************************************
+ *
+ * Additional ACPI Tables (2)
+ *
+ * These tables are not consumed directly by the ACPICA subsystem, but are
+ * included here to support device drivers and the AML disassembler.
+ *
+ * The tables in this file are defined by third-party specifications, and are
+ * not defined directly by the ACPI specification itself.
+ *
+ ******************************************************************************/
+
+/*
+ * Values for description table header signatures for tables defined in this
+ * file. Useful because they make it more difficult to inadvertently type in
+ * the wrong signature.
+ */
+#define ACPI_SIG_ASF "ASF!" /* Alert Standard Format table */
+#define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */
+#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */
+#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */
+#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */
+#define ACPI_SIG_IBFT "IBFT" /* i_sCSI Boot Firmware Table */
+#define ACPI_SIG_IVRS "IVRS" /* I/O Virtualization Reporting Structure */
+#define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */
+#define ACPI_SIG_SLIC "SLIC" /* Software Licensing Description Table */
+#define ACPI_SIG_SPCR "SPCR" /* Serial Port Console Redirection table */
+#define ACPI_SIG_SPMI "SPMI" /* Server Platform Management Interface table */
+#define ACPI_SIG_TCPA "TCPA" /* Trusted Computing Platform Alliance table */
+#define ACPI_SIG_UEFI "UEFI" /* Uefi Boot Optimization Table */
+#define ACPI_SIG_WAET "WAET" /* Windows ACPI Emulated devices Table */
+#define ACPI_SIG_WDAT "WDAT" /* Watchdog Action Table */
+#define ACPI_SIG_WDRT "WDRT" /* Watchdog Resource Table */
+
+/*
+ * All tables must be byte-packed to match the ACPI specification, since
+ * the tables are provided by the system BIOS.
+ */
+#pragma pack(1)
+
+/*
+ * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
+ * This is the only type that is even remotely portable. Anything else is not
+ * portable, so do not use any other bitfield types.
+ */
+
+/*******************************************************************************
+ *
+ * ASF - Alert Standard Format table (Signature "ASF!")
+ * Revision 0x10
+ *
+ * Conforms to the Alert Standard Format Specification V2.0, 23 April 2003
+ *
+ ******************************************************************************/
+
+struct acpi_table_asf {
+ struct acpi_table_header header; /* Common ACPI table header */
+};
+
+/* ASF subtable header */
+
+struct acpi_asf_header {
+ u8 type;
+ u8 reserved;
+ u16 length;
+};
+
+/* Values for Type field above */
+
+enum acpi_asf_type {
+ ACPI_ASF_TYPE_INFO = 0,
+ ACPI_ASF_TYPE_ALERT = 1,
+ ACPI_ASF_TYPE_CONTROL = 2,
+ ACPI_ASF_TYPE_BOOT = 3,
+ ACPI_ASF_TYPE_ADDRESS = 4,
+ ACPI_ASF_TYPE_RESERVED = 5
+};
+
+/*
+ * ASF subtables
+ */
+
+/* 0: ASF Information */
+
+struct acpi_asf_info {
+ struct acpi_asf_header header;
+ u8 min_reset_value;
+ u8 min_poll_interval;
+ u16 system_id;
+ u32 mfg_id;
+ u8 flags;
+ u8 reserved2[3];
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_ASF_SMBUS_PROTOCOLS (1)
+
+/* 1: ASF Alerts */
+
+struct acpi_asf_alert {
+ struct acpi_asf_header header;
+ u8 assert_mask;
+ u8 deassert_mask;
+ u8 alerts;
+ u8 data_length;
+};
+
+struct acpi_asf_alert_data {
+ u8 address;
+ u8 command;
+ u8 mask;
+ u8 value;
+ u8 sensor_type;
+ u8 type;
+ u8 offset;
+ u8 source_type;
+ u8 severity;
+ u8 sensor_number;
+ u8 entity;
+ u8 instance;
+};
+
+/* 2: ASF Remote Control */
+
+struct acpi_asf_remote {
+ struct acpi_asf_header header;
+ u8 controls;
+ u8 data_length;
+ u16 reserved2;
+};
+
+struct acpi_asf_control_data {
+ u8 function;
+ u8 address;
+ u8 command;
+ u8 value;
+};
+
+/* 3: ASF RMCP Boot Options */
+
+struct acpi_asf_rmcp {
+ struct acpi_asf_header header;
+ u8 capabilities[7];
+ u8 completion_code;
+ u32 enterprise_id;
+ u8 command;
+ u16 parameter;
+ u16 boot_options;
+ u16 oem_parameters;
+};
+
+/* 4: ASF Address */
+
+struct acpi_asf_address {
+ struct acpi_asf_header header;
+ u8 eprom_address;
+ u8 devices;
+};
+
+/*******************************************************************************
+ *
+ * BOOT - Simple Boot Flag Table
+ * Version 1
+ *
+ * Conforms to the "Simple Boot Flag Specification", Version 2.1
+ *
+ ******************************************************************************/
+
+struct acpi_table_boot {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 cmos_index; /* Index in CMOS RAM for the boot register */
+ u8 reserved[3];
+};
+
+/*******************************************************************************
+ *
+ * DBGP - Debug Port table
+ * Version 1
+ *
+ * Conforms to the "Debug Port Specification", Version 1.00, 2/9/2000
+ *
+ ******************************************************************************/
+
+struct acpi_table_dbgp {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 type; /* 0=full 16550, 1=subset of 16550 */
+ u8 reserved[3];
+ struct acpi_generic_address debug_port;
+};
+
+/*******************************************************************************
+ *
+ * DMAR - DMA Remapping table
+ * Version 1
+ *
+ * Conforms to "Intel Virtualization Technology for Directed I/O",
+ * Version 1.2, Sept. 2008
+ *
+ ******************************************************************************/
+
+struct acpi_table_dmar {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 width; /* Host Address Width */
+ u8 flags;
+ u8 reserved[10];
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_DMAR_INTR_REMAP (1)
+
+/* DMAR subtable header */
+
+struct acpi_dmar_header {
+ u16 type;
+ u16 length;
+};
+
+/* Values for subtable type in struct acpi_dmar_header */
+
+enum acpi_dmar_type {
+ ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,
+ ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,
+ ACPI_DMAR_TYPE_ATSR = 2,
+ ACPI_DMAR_HARDWARE_AFFINITY = 3,
+ ACPI_DMAR_TYPE_RESERVED = 4 /* 4 and greater are reserved */
+};
+
+/* DMAR Device Scope structure */
+
+struct acpi_dmar_device_scope {
+ u8 entry_type;
+ u8 length;
+ u16 reserved;
+ u8 enumeration_id;
+ u8 bus;
+};
+
+/* Values for entry_type in struct acpi_dmar_device_scope */
+
+enum acpi_dmar_scope_type {
+ ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0,
+ ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1,
+ ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2,
+ ACPI_DMAR_SCOPE_TYPE_IOAPIC = 3,
+ ACPI_DMAR_SCOPE_TYPE_HPET = 4,
+ ACPI_DMAR_SCOPE_TYPE_RESERVED = 5 /* 5 and greater are reserved */
+};
+
+struct acpi_dmar_pci_path {
+ u8 dev;
+ u8 fn;
+};
+
+/*
+ * DMAR Sub-tables, correspond to Type in struct acpi_dmar_header
+ */
+
+/* 0: Hardware Unit Definition */
+
+struct acpi_dmar_hardware_unit {
+ struct acpi_dmar_header header;
+ u8 flags;
+ u8 reserved;
+ u16 segment;
+ u64 address; /* Register Base Address */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_DMAR_INCLUDE_ALL (1)
+
+/* 1: Reserved Memory Defininition */
+
+struct acpi_dmar_reserved_memory {
+ struct acpi_dmar_header header;
+ u16 reserved;
+ u16 segment;
+ u64 base_address; /* 4_k aligned base address */
+ u64 end_address; /* 4_k aligned limit address */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_DMAR_ALLOW_ALL (1)
+
+/* 2: Root Port ATS Capability Reporting Structure */
+
+struct acpi_dmar_atsr {
+ struct acpi_dmar_header header;
+ u8 flags;
+ u8 reserved;
+ u16 segment;
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_DMAR_ALL_PORTS (1)
+
+/* 3: Remapping Hardware Static Affinity Structure */
+
+struct acpi_dmar_rhsa {
+ struct acpi_dmar_header header;
+ u32 reserved;
+ u64 base_address;
+ u32 proximity_domain;
+};
+
+/*******************************************************************************
+ *
+ * HPET - High Precision Event Timer table
+ * Version 1
+ *
+ * Conforms to "IA-PC HPET (High Precision Event Timers) Specification",
+ * Version 1.0a, October 2004
+ *
+ ******************************************************************************/
+
+struct acpi_table_hpet {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 id; /* Hardware ID of event timer block */
+ struct acpi_generic_address address; /* Address of event timer block */
+ u8 sequence; /* HPET sequence number */
+ u16 minimum_tick; /* Main counter min tick, periodic mode */
+ u8 flags;
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_HPET_PAGE_PROTECT_MASK (3)
+
+/* Values for Page Protect flags */
+
+enum acpi_hpet_page_protect {
+ ACPI_HPET_NO_PAGE_PROTECT = 0,
+ ACPI_HPET_PAGE_PROTECT4 = 1,
+ ACPI_HPET_PAGE_PROTECT64 = 2
+};
+
+/*******************************************************************************
+ *
+ * IBFT - Boot Firmware Table
+ * Version 1
+ *
+ * Conforms to "iSCSI Boot Firmware Table (iBFT) as Defined in ACPI 3.0b
+ * Specification", Version 1.01, March 1, 2007
+ *
+ * Note: It appears that this table is not intended to appear in the RSDT/XSDT.
+ * Therefore, it is not currently supported by the disassembler.
+ *
+ ******************************************************************************/
+
+struct acpi_table_ibft {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 reserved[12];
+};
+
+/* IBFT common subtable header */
+
+struct acpi_ibft_header {
+ u8 type;
+ u8 version;
+ u16 length;
+ u8 index;
+ u8 flags;
+};
+
+/* Values for Type field above */
+
+enum acpi_ibft_type {
+ ACPI_IBFT_TYPE_NOT_USED = 0,
+ ACPI_IBFT_TYPE_CONTROL = 1,
+ ACPI_IBFT_TYPE_INITIATOR = 2,
+ ACPI_IBFT_TYPE_NIC = 3,
+ ACPI_IBFT_TYPE_TARGET = 4,
+ ACPI_IBFT_TYPE_EXTENSIONS = 5,
+ ACPI_IBFT_TYPE_RESERVED = 6 /* 6 and greater are reserved */
+};
+
+/* IBFT subtables */
+
+struct acpi_ibft_control {
+ struct acpi_ibft_header header;
+ u16 extensions;
+ u16 initiator_offset;
+ u16 nic0_offset;
+ u16 target0_offset;
+ u16 nic1_offset;
+ u16 target1_offset;
+};
+
+struct acpi_ibft_initiator {
+ struct acpi_ibft_header header;
+ u8 sns_server[16];
+ u8 slp_server[16];
+ u8 primary_server[16];
+ u8 secondary_server[16];
+ u16 name_length;
+ u16 name_offset;
+};
+
+struct acpi_ibft_nic {
+ struct acpi_ibft_header header;
+ u8 ip_address[16];
+ u8 subnet_mask_prefix;
+ u8 origin;
+ u8 gateway[16];
+ u8 primary_dns[16];
+ u8 secondary_dns[16];
+ u8 dhcp[16];
+ u16 vlan;
+ u8 mac_address[6];
+ u16 pci_address;
+ u16 name_length;
+ u16 name_offset;
+};
+
+struct acpi_ibft_target {
+ struct acpi_ibft_header header;
+ u8 target_ip_address[16];
+ u16 target_ip_socket;
+ u8 target_boot_lun[8];
+ u8 chap_type;
+ u8 nic_association;
+ u16 target_name_length;
+ u16 target_name_offset;
+ u16 chap_name_length;
+ u16 chap_name_offset;
+ u16 chap_secret_length;
+ u16 chap_secret_offset;
+ u16 reverse_chap_name_length;
+ u16 reverse_chap_name_offset;
+ u16 reverse_chap_secret_length;
+ u16 reverse_chap_secret_offset;
+};
+
+/*******************************************************************************
+ *
+ * IVRS - I/O Virtualization Reporting Structure
+ * Version 1
+ *
+ * Conforms to "AMD I/O Virtualization Technology (IOMMU) Specification",
+ * Revision 1.26, February 2009.
+ *
+ ******************************************************************************/
+
+struct acpi_table_ivrs {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 info; /* Common virtualization info */
+ u64 reserved;
+};
+
+/* Values for Info field above */
+
+#define ACPI_IVRS_PHYSICAL_SIZE 0x00007F00 /* 7 bits, physical address size */
+#define ACPI_IVRS_VIRTUAL_SIZE 0x003F8000 /* 7 bits, virtual address size */
+#define ACPI_IVRS_ATS_RESERVED 0x00400000 /* ATS address translation range reserved */
+
+/* IVRS subtable header */
+
+struct acpi_ivrs_header {
+ u8 type; /* Subtable type */
+ u8 flags;
+ u16 length; /* Subtable length */
+ u16 device_id; /* ID of IOMMU */
+};
+
+/* Values for subtable Type above */
+
+enum acpi_ivrs_type {
+ ACPI_IVRS_TYPE_HARDWARE = 0x10,
+ ACPI_IVRS_TYPE_MEMORY1 = 0x20,
+ ACPI_IVRS_TYPE_MEMORY2 = 0x21,
+ ACPI_IVRS_TYPE_MEMORY3 = 0x22
+};
+
+/* Masks for Flags field above for IVHD subtable */
+
+#define ACPI_IVHD_TT_ENABLE (1)
+#define ACPI_IVHD_PASS_PW (1<<1)
+#define ACPI_IVHD_RES_PASS_PW (1<<2)
+#define ACPI_IVHD_ISOC (1<<3)
+#define ACPI_IVHD_IOTLB (1<<4)
+
+/* Masks for Flags field above for IVMD subtable */
+
+#define ACPI_IVMD_UNITY (1)
+#define ACPI_IVMD_READ (1<<1)
+#define ACPI_IVMD_WRITE (1<<2)
+#define ACPI_IVMD_EXCLUSION_RANGE (1<<3)
+
+/*
+ * IVRS subtables, correspond to Type in struct acpi_ivrs_header
+ */
+
+/* 0x10: I/O Virtualization Hardware Definition Block (IVHD) */
+
+struct acpi_ivrs_hardware {
+ struct acpi_ivrs_header header;
+ u16 capability_offset; /* Offset for IOMMU control fields */
+ u64 base_address; /* IOMMU control registers */
+ u16 pci_segment_group;
+ u16 info; /* MSI number and unit ID */
+ u32 reserved;
+};
+
+/* Masks for Info field above */
+
+#define ACPI_IVHD_MSI_NUMBER_MASK 0x001F /* 5 bits, MSI message number */
+#define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, unit_iD */
+
+/*
+ * Device Entries for IVHD subtable, appear after struct acpi_ivrs_hardware structure.
+ * Upper two bits of the Type field are the (encoded) length of the structure.
+ * Currently, only 4 and 8 byte entries are defined. 16 and 32 byte entries
+ * are reserved for future use but not defined.
+ */
+struct acpi_ivrs_de_header {
+ u8 type;
+ u16 id;
+ u8 data_setting;
+};
+
+/* Length of device entry is in the top two bits of Type field above */
+
+#define ACPI_IVHD_ENTRY_LENGTH 0xC0
+
+/* Values for device entry Type field above */
+
+enum acpi_ivrs_device_entry_type {
+ /* 4-byte device entries, all use struct acpi_ivrs_device4 */
+
+ ACPI_IVRS_TYPE_PAD4 = 0,
+ ACPI_IVRS_TYPE_ALL = 1,
+ ACPI_IVRS_TYPE_SELECT = 2,
+ ACPI_IVRS_TYPE_START = 3,
+ ACPI_IVRS_TYPE_END = 4,
+
+ /* 8-byte device entries */
+
+ ACPI_IVRS_TYPE_PAD8 = 64,
+ ACPI_IVRS_TYPE_NOT_USED = 65,
+ ACPI_IVRS_TYPE_ALIAS_SELECT = 66, /* Uses struct acpi_ivrs_device8a */
+ ACPI_IVRS_TYPE_ALIAS_START = 67, /* Uses struct acpi_ivrs_device8a */
+ ACPI_IVRS_TYPE_EXT_SELECT = 70, /* Uses struct acpi_ivrs_device8b */
+ ACPI_IVRS_TYPE_EXT_START = 71, /* Uses struct acpi_ivrs_device8b */
+ ACPI_IVRS_TYPE_SPECIAL = 72 /* Uses struct acpi_ivrs_device8c */
+};
+
+/* Values for Data field above */
+
+#define ACPI_IVHD_INIT_PASS (1)
+#define ACPI_IVHD_EINT_PASS (1<<1)
+#define ACPI_IVHD_NMI_PASS (1<<2)
+#define ACPI_IVHD_SYSTEM_MGMT (3<<4)
+#define ACPI_IVHD_LINT0_PASS (1<<6)
+#define ACPI_IVHD_LINT1_PASS (1<<7)
+
+/* Types 0-4: 4-byte device entry */
+
+struct acpi_ivrs_device4 {
+ struct acpi_ivrs_de_header header;
+};
+
+/* Types 66-67: 8-byte device entry */
+
+struct acpi_ivrs_device8a {
+ struct acpi_ivrs_de_header header;
+ u8 reserved1;
+ u16 used_id;
+ u8 reserved2;
+};
+
+/* Types 70-71: 8-byte device entry */
+
+struct acpi_ivrs_device8b {
+ struct acpi_ivrs_de_header header;
+ u32 extended_data;
+};
+
+/* Values for extended_data above */
+
+#define ACPI_IVHD_ATS_DISABLED (1<<31)
+
+/* Type 72: 8-byte device entry */
+
+struct acpi_ivrs_device8c {
+ struct acpi_ivrs_de_header header;
+ u8 handle;
+ u16 used_id;
+ u8 variety;
+};
+
+/* Values for Variety field above */
+
+#define ACPI_IVHD_IOAPIC 1
+#define ACPI_IVHD_HPET 2
+
+/* 0x20, 0x21, 0x22: I/O Virtualization Memory Definition Block (IVMD) */
+
+struct acpi_ivrs_memory {
+ struct acpi_ivrs_header header;
+ u16 aux_data;
+ u64 reserved;
+ u64 start_address;
+ u64 memory_length;
+};
+
+/*******************************************************************************
+ *
+ * MCFG - PCI Memory Mapped Configuration table and sub-table
+ * Version 1
+ *
+ * Conforms to "PCI Firmware Specification", Revision 3.0, June 20, 2005
+ *
+ ******************************************************************************/
+
+struct acpi_table_mcfg {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 reserved[8];
+};
+
+/* Subtable */
+
+struct acpi_mcfg_allocation {
+ u64 address; /* Base address, processor-relative */
+ u16 pci_segment; /* PCI segment group number */
+ u8 start_bus_number; /* Starting PCI Bus number */
+ u8 end_bus_number; /* Final PCI Bus number */
+ u32 reserved;
+};
+
+/*******************************************************************************
+ *
+ * SPCR - Serial Port Console Redirection table
+ * Version 1
+ *
+ * Conforms to "Serial Port Console Redirection Table",
+ * Version 1.00, January 11, 2002
+ *
+ ******************************************************************************/
+
+struct acpi_table_spcr {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 interface_type; /* 0=full 16550, 1=subset of 16550 */
+ u8 reserved[3];
+ struct acpi_generic_address serial_port;
+ u8 interrupt_type;
+ u8 pc_interrupt;
+ u32 interrupt;
+ u8 baud_rate;
+ u8 parity;
+ u8 stop_bits;
+ u8 flow_control;
+ u8 terminal_type;
+ u8 reserved1;
+ u16 pci_device_id;
+ u16 pci_vendor_id;
+ u8 pci_bus;
+ u8 pci_device;
+ u8 pci_function;
+ u32 pci_flags;
+ u8 pci_segment;
+ u32 reserved2;
+};
+
+/* Masks for pci_flags field above */
+
+#define ACPI_SPCR_DO_NOT_DISABLE (1)
+
+/*******************************************************************************
+ *
+ * SPMI - Server Platform Management Interface table
+ * Version 5
+ *
+ * Conforms to "Intelligent Platform Management Interface Specification
+ * Second Generation v2.0", Document Revision 1.0, February 12, 2004 with
+ * June 12, 2009 markup.
+ *
+ ******************************************************************************/
+
+struct acpi_table_spmi {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 interface_type;
+ u8 reserved; /* Must be 1 */
+ u16 spec_revision; /* Version of IPMI */
+ u8 interrupt_type;
+ u8 gpe_number; /* GPE assigned */
+ u8 reserved1;
+ u8 pci_device_flag;
+ u32 interrupt;
+ struct acpi_generic_address ipmi_register;
+ u8 pci_segment;
+ u8 pci_bus;
+ u8 pci_device;
+ u8 pci_function;
+ u8 reserved2;
+};
+
+/* Values for interface_type above */
+
+enum acpi_spmi_interface_types {
+ ACPI_SPMI_NOT_USED = 0,
+ ACPI_SPMI_KEYBOARD = 1,
+ ACPI_SPMI_SMI = 2,
+ ACPI_SPMI_BLOCK_TRANSFER = 3,
+ ACPI_SPMI_SMBUS = 4,
+ ACPI_SPMI_RESERVED = 5 /* 5 and above are reserved */
+};
+
+/*******************************************************************************
+ *
+ * TCPA - Trusted Computing Platform Alliance table
+ * Version 1
+ *
+ * Conforms to "TCG PC Specific Implementation Specification",
+ * Version 1.1, August 18, 2003
+ *
+ ******************************************************************************/
+
+struct acpi_table_tcpa {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u16 reserved;
+ u32 max_log_length; /* Maximum length for the event log area */
+ u64 log_address; /* Address of the event log area */
+};
+
+/*******************************************************************************
+ *
+ * UEFI - UEFI Boot optimization Table
+ * Version 1
+ *
+ * Conforms to "Unified Extensible Firmware Interface Specification",
+ * Version 2.3, May 8, 2009
+ *
+ ******************************************************************************/
+
+struct acpi_table_uefi {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 identifier[16]; /* UUID identifier */
+ u16 data_offset; /* Offset of remaining data in table */
+};
+
+/*******************************************************************************
+ *
+ * WAET - Windows ACPI Emulated devices Table
+ * Version 1
+ *
+ * Conforms to "Windows ACPI Emulated Devices Table", version 1.0, April 6, 2009
+ *
+ ******************************************************************************/
+
+struct acpi_table_waet {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 flags;
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_WAET_RTC_NO_ACK (1) /* RTC requires no int acknowledge */
+#define ACPI_WAET_TIMER_ONE_READ (1<<1) /* PM timer requires only one read */
+
+/*******************************************************************************
+ *
+ * WDAT - Watchdog Action Table
+ * Version 1
+ *
+ * Conforms to "Hardware Watchdog Timers Design Specification",
+ * Copyright 2006 Microsoft Corporation.
+ *
+ ******************************************************************************/
+
+struct acpi_table_wdat {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 header_length; /* Watchdog Header Length */
+ u16 pci_segment; /* PCI Segment number */
+ u8 pci_bus; /* PCI Bus number */
+ u8 pci_device; /* PCI Device number */
+ u8 pci_function; /* PCI Function number */
+ u8 reserved[3];
+ u32 timer_period; /* Period of one timer count (msec) */
+ u32 max_count; /* Maximum counter value supported */
+ u32 min_count; /* Minimum counter value */
+ u8 flags;
+ u8 reserved2[3];
+ u32 entries; /* Number of watchdog entries that follow */
+};
+
+/* Masks for Flags field above */
+
+#define ACPI_WDAT_ENABLED (1)
+#define ACPI_WDAT_STOPPED 0x80
+
+/* WDAT Instruction Entries (actions) */
+
+struct acpi_wdat_entry {
+ u8 action;
+ u8 instruction;
+ u16 reserved;
+ struct acpi_generic_address register_region;
+ u32 value; /* Value used with Read/Write register */
+ u32 mask; /* Bitmask required for this register instruction */
+};
+
+/* Values for Action field above */
+
+enum acpi_wdat_actions {
+ ACPI_WDAT_RESET = 1,
+ ACPI_WDAT_GET_CURRENT_COUNTDOWN = 4,
+ ACPI_WDAT_GET_COUNTDOWN = 5,
+ ACPI_WDAT_SET_COUNTDOWN = 6,
+ ACPI_WDAT_GET_RUNNING_STATE = 8,
+ ACPI_WDAT_SET_RUNNING_STATE = 9,
+ ACPI_WDAT_GET_STOPPED_STATE = 10,
+ ACPI_WDAT_SET_STOPPED_STATE = 11,
+ ACPI_WDAT_GET_REBOOT = 16,
+ ACPI_WDAT_SET_REBOOT = 17,
+ ACPI_WDAT_GET_SHUTDOWN = 18,
+ ACPI_WDAT_SET_SHUTDOWN = 19,
+ ACPI_WDAT_GET_STATUS = 32,
+ ACPI_WDAT_SET_STATUS = 33,
+ ACPI_WDAT_ACTION_RESERVED = 34 /* 34 and greater are reserved */
+};
+
+/* Values for Instruction field above */
+
+enum acpi_wdat_instructions {
+ ACPI_WDAT_READ_VALUE = 0,
+ ACPI_WDAT_READ_COUNTDOWN = 1,
+ ACPI_WDAT_WRITE_VALUE = 2,
+ ACPI_WDAT_WRITE_COUNTDOWN = 3,
+ ACPI_WDAT_INSTRUCTION_RESERVED = 4, /* 4 and greater are reserved */
+ ACPI_WDAT_PRESERVE_REGISTER = 0x80 /* Except for this value */
+};
+
+/*******************************************************************************
+ *
+ * WDRT - Watchdog Resource Table
+ * Version 1
+ *
+ * Conforms to "Watchdog Timer Hardware Requirements for Windows Server 2003",
+ * Version 1.01, August 28, 2006
+ *
+ ******************************************************************************/
+
+struct acpi_table_wdrt {
+ struct acpi_table_header header; /* Common ACPI table header */
+ struct acpi_generic_address control_register;
+ struct acpi_generic_address count_register;
+ u16 pci_device_id;
+ u16 pci_vendor_id;
+ u8 pci_bus; /* PCI Bus number */
+ u8 pci_device; /* PCI Device number */
+ u8 pci_function; /* PCI Function number */
+ u8 pci_segment; /* PCI Segment number */
+ u16 max_count; /* Maximum counter value supported */
+ u8 units;
+};
+
+/* Reset to default packing */
+
+#pragma pack()
+
+#endif /* __ACTBL2_H__ */
/* PM Timer ticks per second (HZ) */
-#define PM_TIMER_FREQUENCY 3579545
+#define PM_TIMER_FREQUENCY 3579545
/*******************************************************************************
*
#define ACPI_ADR_SPACE_SMBUS (acpi_adr_space_type) 4
#define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5
#define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6
-#define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 7
+#define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7
+#define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 8
#define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 127
/*
void (*acpi_notify_handler) (acpi_handle device, u32 value, void *context);
typedef
-void (*acpi_object_handler) (acpi_handle object, u32 function, void *data);
+void (*acpi_object_handler) (acpi_handle object, void *data);
typedef acpi_status(*acpi_init_handler) (acpi_handle object, u32 function);
#define ACPI_INTERRUPT_NOT_HANDLED 0x00
#define ACPI_INTERRUPT_HANDLED 0x01
-/* Length of _HID, _UID, _CID, and UUID values */
+/* Length of 32-bit EISAID values when converted back to a string */
+
+#define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */
+
+/* Length of UUID (string) values */
-#define ACPI_DEVICE_ID_LENGTH 0x09
-#define ACPI_MAX_CID_LENGTH 48
#define ACPI_UUID_LENGTH 16
-/* Common string version of device HIDs and UIDs */
+/* Structures used for device/processor HID, UID, CID */
struct acpica_device_id {
- char value[ACPI_DEVICE_ID_LENGTH];
+ u32 length; /* Length of string + null */
+ char *string;
};
-/* Common string version of device CIDs */
-
-struct acpi_compatible_id {
- char value[ACPI_MAX_CID_LENGTH];
+struct acpica_device_id_list {
+ u32 count; /* Number of IDs in Ids array */
+ u32 list_size; /* Size of list, including ID strings */
+ struct acpica_device_id ids[1]; /* ID array */
};
-struct acpi_compatible_id_list {
- u32 count;
- u32 size;
- struct acpi_compatible_id id[1];
+/*
+ * Structure returned from acpi_get_object_info.
+ * Optimized for both 32- and 64-bit builds
+ */
+struct acpi_device_info {
+ u32 info_size; /* Size of info, including ID strings */
+ u32 name; /* ACPI object Name */
+ acpi_object_type type; /* ACPI object Type */
+ u8 param_count; /* If a method, required parameter count */
+ u8 valid; /* Indicates which optional fields are valid */
+ u8 flags; /* Miscellaneous info */
+ u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
+ u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
+ u32 current_status; /* _STA value */
+ acpi_integer address; /* _ADR value */
+ struct acpica_device_id hardware_id; /* _HID value */
+ struct acpica_device_id unique_id; /* _UID value */
+ struct acpica_device_id_list compatible_id_list; /* _CID list <must be last> */
};
-/* Structure and flags for acpi_get_object_info */
+/* Values for Flags field above (acpi_get_object_info) */
+
+#define ACPI_PCI_ROOT_BRIDGE 0x01
-#define ACPI_VALID_STA 0x0001
-#define ACPI_VALID_ADR 0x0002
-#define ACPI_VALID_HID 0x0004
-#define ACPI_VALID_UID 0x0008
-#define ACPI_VALID_CID 0x0010
-#define ACPI_VALID_SXDS 0x0020
+/* Flags for Valid field above (acpi_get_object_info) */
+
+#define ACPI_VALID_STA 0x01
+#define ACPI_VALID_ADR 0x02
+#define ACPI_VALID_HID 0x04
+#define ACPI_VALID_UID 0x08
+#define ACPI_VALID_CID 0x10
+#define ACPI_VALID_SXDS 0x20
+#define ACPI_VALID_SXWS 0x40
/* Flags for _STA method */
#define ACPI_STA_DEVICE_OK 0x08 /* Synonym */
#define ACPI_STA_BATTERY_PRESENT 0x10
-#define ACPI_COMMON_OBJ_INFO \
- acpi_object_type type; /* ACPI object type */ \
- acpi_name name /* ACPI object Name */
-
-struct acpi_obj_info_header {
- ACPI_COMMON_OBJ_INFO;
-};
-
-/* Structure returned from Get Object Info */
-
-struct acpi_device_info {
- ACPI_COMMON_OBJ_INFO;
-
- u32 param_count; /* If a method, required parameter count */
- u32 valid; /* Indicates which fields below are valid */
- u32 current_status; /* _STA value */
- acpi_integer address; /* _ADR value if any */
- struct acpica_device_id hardware_id; /* _HID value if any */
- struct acpica_device_id unique_id; /* _UID value if any */
- u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
- struct acpi_compatible_id_list compatibility_id; /* List of _CIDs if any */
-};
-
/* Context structs for address space handlers */
struct acpi_pci_id {
#define ACPI_FREE(a) kfree(a)
/* Used within ACPICA to show where it is safe to preempt execution */
-
+#include <linux/hardirq.h>
#define ACPI_PREEMPTION_POINT() \
do { \
- if (!irqs_disabled()) \
+ if (!in_atomic_preempt_off()) \
cond_resched(); \
} while (0)
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_numa.h>
#include <asm/acpi.h>
-#include <linux/dmi.h>
-
enum acpi_irq_model_id {
ACPI_IRQ_MODEL_PIC = 0,
#endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */
extern int acpi_blacklisted(void);
-#ifdef CONFIG_DMI
extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
extern int acpi_osi_setup(char *str);
-#endif
#ifdef CONFIG_ACPI_NUMA
int acpi_get_pxm(acpi_handle handle);
extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 flags);
extern void acpi_early_init(void);
-#else /* CONFIG_ACPI */
+#else /* !CONFIG_ACPI */
+
+#define acpi_disabled 1
+
static inline void acpi_early_init(void) { }
static inline int early_acpi_boot_init(void)
return 0;
}
+struct acpi_table_header;
+static inline int acpi_table_parse(char *id,
+ int (*handler)(struct acpi_table_header *))
+{
+ return -1;
+}
#endif /* !CONFIG_ACPI */
#endif /*_LINUX_ACPI_H*/
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff