[libata] Update kernel-doc comments to match source code

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 837fb60..c2f18ef 100644 (file)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4732,7 +4732,6 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
 /**
  *     ata_qc_new_init - Request an available ATA command, and initialize it
  *     @dev: Device from whom we request an available command structure
- *     @tag: command tag
  *
  *     LOCKING:
  *     None.

diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 1266924..1050fed 100644 (file)
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -356,7 +356,6 @@ static void bfin_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *     bfin_set_dmamode - Initialize host controller PATA DMA timings
  *     @ap: Port whose timings we are configuring
  *     @adev: um
- *     @udma: udma mode, 0 - 6
  *
  *     Set UDMA mode for device.
  *

diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index cbd98c1..6c1d778 100644 (file)
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -638,7 +638,6 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *     qdi6580dp_set_piomode           -       PIO setup for dual channel
  *     @ap: Port
  *     @adev: Device
- *     @irq: interrupt line
  *
  *     In dual channel mode the 6580 has one clock per channel and we have
  *     to software clockswitch in qc_issue.

diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index c0dbc46..2c1a91c 100644 (file)
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -116,7 +116,6 @@ static void oldpiix_set_piomode (struct ata_port *ap, struct ata_device *adev)
  *     oldpiix_set_dmamode - Initialize host controller PATA DMA timings
  *     @ap: Port whose timings we are configuring
  *     @adev: Device to program
- *     @isich: True if the device is an ICH and has IOCFG registers
  *
  *     Set MWDMA mode for device, in host controller PCI config space.
  *

diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index d43e8be..e94efcc 100644 (file)
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -281,7 +281,6 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
  *     pdc2027x_set_piomode - Initialize host controller PATA PIO timings
  *     @ap: Port to configure
  *     @adev: um
- *     @pio: PIO mode, 0 - 4
  *
  *     Set PIO mode for device.
  *
@@ -326,7 +325,6 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *     pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings
  *     @ap: Port to configure
  *     @adev: um
- *     @udma: udma mode, XFER_UDMA_0 to XFER_UDMA_6
  *
  *     Set UDMA mode for device.
  *

diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 0b0aa45..695d44a 100644 (file)
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -81,7 +81,6 @@ static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev)
  *     radisys_set_dmamode - Initialize host controller PATA DMA timings
  *     @ap: Port whose timings we are configuring
  *     @adev: Device to program
- *     @isich: True if the device is an ICH and has IOCFG registers
  *
  *     Set MWDMA mode for device, in host controller PCI config space.
  *

diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index cf3707e..d447f1c 100644 (file)
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -210,7 +210,6 @@ static void scc_set_piomode (struct ata_port *ap, struct ata_device *adev)
  *     scc_set_dmamode - Initialize host controller PATA DMA timings
  *     @ap: Port whose timings we are configuring
  *     @adev: um
- *     @udma: udma mode, 0 - 6
  *
  *     Set UDMA mode for device.
  *

diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 72e41c9..8d2fd9d 100644 (file)
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -138,7 +138,6 @@ static struct sv_cable_table cable_detect[] = {
 /**
  *     serverworks_cable_detect        -       cable detection
  *     @ap: ATA port
- *     @deadline: deadline jiffies for the operation
  *
  *     Perform cable detection according to the device and subvendor
  *     identifications

diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index e4be55e..27ceb42 100644 (file)
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -112,7 +112,6 @@ static int sis_133_cable_detect(struct ata_port *ap)
 /**
  *     sis_66_cable_detect     -       check for 40/80 pin
  *     @ap: Port
- *     @deadline: deadline jiffies for the operation
  *
  *     Perform cable detection on the UDMA66, UDMA100 and early UDMA133
  *     SiS IDE controllers.

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 2b24ae5..8691863 100644 (file)
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1836,7 +1836,6 @@ static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
 /**
  *      mv_err_intr - Handle error interrupts on the port
  *      @ap: ATA channel to manipulate
- *      @qc: affected command (non-NCQ), or NULL
  *
  *      Most cases require a full reset of the chip's state machine,
  *      which also performs a COMRESET.