* Random cleanups spotted by checkpatch script.
* Do not initialize panic_timeout. "panic=" kernel parameter can be used.
* Do not add "ip=any" or "ip=bootp". This options is not board specific.
* Do not add "root=/dev/nfs". This is default on CONFIG_ROOT_NFS.
* Kill unused error checking.
* Fix IRQ comment to match current code.
* Kill some unneeded includes
* ST0_ERL is already cleared in generic code.
* conswitchp is initialized generic code.
* __init is not needed in prototype.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
#include <asm/io.h>
#include <asm/txx9/smsc_fdc37m81x.h>
-#define DEBUG
-
/* Common Registers */
#define SMSC_FDC37M81X_CONFIG_INDEX 0x00
#define SMSC_FDC37M81X_CONFIG_DATA 0x01
#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa
#define SMSC_FDC37M81X_CHIP_ID 0x4d
-static unsigned long g_smsc_fdc37m81x_base = 0;
+static unsigned long g_smsc_fdc37m81x_base;
static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
{
u8 chip_id;
if (g_smsc_fdc37m81x_base)
- printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
+ printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+ __func__,
field, g_smsc_fdc37m81x_base);
g_smsc_fdc37m81x_base = port;
if (chip_id == SMSC_FDC37M81X_CHIP_ID)
smsc_fdc37m81x_config_end();
else {
- printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
+ printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
chip_id);
g_smsc_fdc37m81x_base = 0;
}
}
#ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
{
- printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+ printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+ key, dev, reg,
smsc_fdc37m81x_rd(reg));
}
void smsc_fdc37m81x_config_dump(void)
{
u8 orig;
- char *fname = "smsc_fdc37m81x_config_dump()";
+ const char *fname = __func__;
smsc_fdc37m81x_config_beg();
orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
- printk("%s: common\n", fname);
+ printk(KERN_INFO "%s: common\n", fname);
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
SMSC_FDC37M81X_DNUM);
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
SMSC_FDC37M81X_PMGT);
- printk("%s: keyboard\n", fname);
+ printk(KERN_INFO "%s: keyboard\n", fname);
smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
SMSC_FDC37M81X_ACTIVE);
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
-#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
+#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>
return;
}
-void
-puts(const char *cp)
-{
- while (*cp)
- prom_putchar(*cp++);
- prom_putchar('\r');
- prom_putchar('\n');
-}
-
void __init jmr3927_prom_init(void)
{
/* CCFG */
if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
- puts("Warning: TX3927 TLB off\n");
+ printk(KERN_ERR "TX3927 TLB off\n");
prom_init_cmdline();
add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
_machine_restart = jmr3927_machine_restart;
- /* Reboot on panic */
- panic_timeout = 180;
-
/* cache setup */
{
unsigned int conf;
#endif
conf = read_c0_conf();
- conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+ conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+ TX39_CONF_WBON | TX39_CONF_CWFON);
conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
/* initialize board */
jmr3927_board_init();
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "ip=")) == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " ip=bootp");
- }
-
tx3927_setup_serial(1 << 1); /* ch1: noCTS */
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "console=")) == NULL) {
- argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
strcat(argptr, " console=ttyS1,115200");
- }
#endif
}
#endif
}
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
{
static struct resource __initdata res = {
.start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
.end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
- struct platform_device *dev;
- dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("rtc-ds1742", -1, &res, 1);
}
static void __init jmr3927_device_init(void)
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
-IRQ Device
-00 RBTX4927-ISA/00
-01 RBTX4927-ISA/01 PS2/Keyboard
-02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03 RBTX4927-ISA/03
-04 RBTX4927-ISA/04
-05 RBTX4927-ISA/05
-06 RBTX4927-ISA/06
-07 RBTX4927-ISA/07
-08 RBTX4927-ISA/08
-09 RBTX4927-ISA/09
-10 RBTX4927-ISA/10
-11 RBTX4927-ISA/11
-12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13 RBTX4927-ISA/13
-14 RBTX4927-ISA/14 IDE
-15 RBTX4927-ISA/15
-
-16 TX4927-CP0/00 Software 0
-17 TX4927-CP0/01 Software 1
-18 TX4927-CP0/02 Cascade TX4927-CP0
-19 TX4927-CP0/03 Multiplexed -- do not use
-20 TX4927-CP0/04 Multiplexed -- do not use
-21 TX4927-CP0/05 Multiplexed -- do not use
-22 TX4927-CP0/06 Multiplexed -- do not use
-23 TX4927-CP0/07 CPU TIMER
-
-24 TX4927-PIC/00
-25 TX4927-PIC/01
-26 TX4927-PIC/02
-27 TX4927-PIC/03 Cascade RBTX4927-IOC
-28 TX4927-PIC/04
-29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30 TX4927-PIC/06
-31 TX4927-PIC/07
-32 TX4927-PIC/08 TX4927 SerialIO Channel 0
-33 TX4927-PIC/09 TX4927 SerialIO Channel 1
-34 TX4927-PIC/10
-35 TX4927-PIC/11
-36 TX4927-PIC/12
-37 TX4927-PIC/13
-38 TX4927-PIC/14
-39 TX4927-PIC/15
-40 TX4927-PIC/16 TX4927 PCI PCI-C
-41 TX4927-PIC/17
-42 TX4927-PIC/18
-43 TX4927-PIC/19
-44 TX4927-PIC/20
-45 TX4927-PIC/21
-46 TX4927-PIC/22 TX4927 PCI PCI-ERR
-47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48 TX4927-PIC/24
-49 TX4927-PIC/25
-50 TX4927-PIC/26
-51 TX4927-PIC/27
-52 TX4927-PIC/28
-53 TX4927-PIC/29
-54 TX4927-PIC/30
-55 TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
#include <linux/init.h>
#include <linux/types.h>
level3 = readb(rbtx4927_imstat_addr) & 0x1f;
if (level3)
sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
- return (sw_irq);
+ return sw_irq;
}
static void __init toshiba_rbtx4927_irq_ioc_init(void)
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/ioport.h>
-#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <asm/io.h>
u32 cp0_config;
char *argptr;
- /* f/w leaves this on at startup */
- clear_c0_status(ST0_ERL);
-
/* enable caches -- HCP5 does this, pmon does not */
cp0_config = read_c0_config();
cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
tx4927_setup_serial();
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (strstr(argptr, "console=") == NULL) {
- strcat(argptr, " console=ttyS0,38400");
- }
-#endif
-
-#ifdef CONFIG_ROOT_NFS
- argptr = prom_getcmdline();
- if (strstr(argptr, "root=") == NULL) {
- strcat(argptr, " root=/dev/nfs rw");
- }
-#endif
-
-#ifdef CONFIG_IP_PNP
- argptr = prom_getcmdline();
- if (strstr(argptr, "ip=") == NULL) {
- strcat(argptr, " ip=any");
- }
+ argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
+ strcat(argptr, " console=ttyS0,38400");
#endif
}
tx4927_time_init(0);
}
-static int __init toshiba_rbtx4927_rtc_init(void)
+static void __init toshiba_rbtx4927_rtc_init(void)
{
struct resource res = {
.start = RBTX4927_BRAMRTC_BASE - IO_BASE,
.end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
.flags = IORESOURCE_MEM,
};
- struct platform_device *dev =
- platform_device_register_simple("rtc-ds1742", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("rtc-ds1742", -1, &res, 1);
}
-static int __init rbtx4927_ne_init(void)
+static void __init rbtx4927_ne_init(void)
{
struct resource res[] = {
{
.flags = IORESOURCE_IRQ,
}
};
- struct platform_device *dev =
- platform_device_register_simple("ne", -1,
- res, ARRAY_SIZE(res));
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
static void __init rbtx4927_device_init(void)
*/
/*
-IRQ Device
-
-16 TX4938-CP0/00 Software 0
-17 TX4938-CP0/01 Software 1
-18 TX4938-CP0/02 Cascade TX4938-CP0
-19 TX4938-CP0/03 Multiplexed -- do not use
-20 TX4938-CP0/04 Multiplexed -- do not use
-21 TX4938-CP0/05 Multiplexed -- do not use
-22 TX4938-CP0/06 Multiplexed -- do not use
-23 TX4938-CP0/07 CPU TIMER
-
-24 TX4938-PIC/00
-25 TX4938-PIC/01
-26 TX4938-PIC/02 Cascade RBTX4938-IOC
-27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28 TX4938-PIC/04
-29 TX4938-PIC/05 TX4938 ETH1
-30 TX4938-PIC/06 TX4938 ETH0
-31 TX4938-PIC/07
-32 TX4938-PIC/08 TX4938 SIO 0
-33 TX4938-PIC/09 TX4938 SIO 1
-34 TX4938-PIC/10 TX4938 DMA0
-35 TX4938-PIC/11 TX4938 DMA1
-36 TX4938-PIC/12 TX4938 DMA2
-37 TX4938-PIC/13 TX4938 DMA3
-38 TX4938-PIC/14
-39 TX4938-PIC/15
-40 TX4938-PIC/16 TX4938 PCIC
-41 TX4938-PIC/17 TX4938 TMR0
-42 TX4938-PIC/18 TX4938 TMR1
-43 TX4938-PIC/19 TX4938 TMR2
-44 TX4938-PIC/20
-45 TX4938-PIC/21
-46 TX4938-PIC/22 TX4938 PCIERR
-47 TX4938-PIC/23
-48 TX4938-PIC/24
-49 TX4938-PIC/25
-50 TX4938-PIC/26
-51 TX4938-PIC/27
-52 TX4938-PIC/28
-53 TX4938-PIC/29
-54 TX4938-PIC/30
-55 TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mipsregs.h>
return sw_irq;
}
-/**********************************************************************************/
-/* Functions for ioc */
-/**********************************************************************************/
static void __init
toshiba_rbtx4938_irq_ioc_init(void)
{
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
tx4938_setup_serial();
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if (strstr(argptr, "console=") == NULL) {
- strcat(argptr, " console=ttyS0,38400");
- }
+ argptr = prom_getcmdline();
+ if (!strstr(argptr, "console="))
+ strcat(argptr, " console=ttyS0,38400");
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
- printk("PIOSEL: disabling both ata and nand selection\n");
- local_irq_disable();
+ printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
txx9_clear64(&tx4938_ccfgptr->pcfg,
TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
- printk("PIOSEL: enabling nand selection\n");
+ printk(KERN_INFO "PIOSEL: enabling nand selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
#endif
#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
- printk("PIOSEL: enabling ata selection\n");
+ printk(KERN_INFO "PIOSEL: enabling ata selection\n");
txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
#endif
-#ifdef CONFIG_IP_PNP
- argptr = prom_getcmdline();
- if (strstr(argptr, "ip=") == NULL) {
- strcat(argptr, " ip=any");
- }
-#endif
-
-
-#ifdef CONFIG_FB
- {
- conswitchp = &dummy_con;
- }
-#endif
-
rbtx4938_spi_setup();
pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */
/* fixup piosel */
rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
- printk("request resource for fpga failed\n");
+ printk(KERN_ERR "request resource for fpga failed\n");
_machine_restart = rbtx4938_machine_restart;
readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
}
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
{
struct resource res[] = {
{
.flags = IORESOURCE_IRQ,
}
};
- struct platform_device *dev =
- platform_device_register_simple("ne", -1,
- res, ARRAY_SIZE(res));
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+ platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
}
static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa
#define SMSC_FDC37M81X_CHIP_ID 0x4d
-unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+unsigned long smsc_fdc37m81x_init(unsigned long port);
void smsc_fdc37m81x_config_beg(void);
void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
void tx3927_setup_serial(unsigned int cts_mask);
struct pci_controller;
-void __init tx3927_pcic_setup(struct pci_controller *channel,
- unsigned long sdram_size, int extarb);
+void tx3927_pcic_setup(struct pci_controller *channel,
+ unsigned long sdram_size, int extarb);
void tx3927_setup_pcierr_irq(void);
void tx3927_irq_init(void);
struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
struct pci_controller *channel);
-void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
- struct pci_controller *channel, int extarb);
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+ struct pci_controller *channel, int extarb);
void tx4927_report_pcic_status(void);
char *tx4927_pcibios_setup(char *str);
void tx4927_dump_pcic_settings(void);
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff