[PATCH] sstfb: cleanups

- Remove 24/32bit unused support (the chips don't do 24/32bit anyway)
- Clean up printk obfuscation
- Clean up lispitus in the if(())()) stuff
- Minor tidying

No functionality changes, may have a crack at hardware scrolling based
on my X driver once the cleanups are in.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Antonino A. Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index dad54e7..711cb11 100644 (file)
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -17,7 +17,10 @@
  *     (port driver to new frambuffer infrastructure)
  * 01/2003 Helge Deller    <deller@gmx.de>
  *     (initial work on fb hardware acceleration for voodoo2)
- *
+ * 08/2006 Alan Cox       <alan@redhat.com>
+ *     Remove never finished and bogus 24/32bit support
+ *     Clean up macro abuse
+ *     Minor tidying for format.
  */
 
 /*
@@ -40,6 +43,7 @@
        through the fifo. warning: issuing a nop command seems to need pci_fifo
 -FIXME: in case of failure in the init sequence, be sure we return to a safe
         state.
+- FIXME: Use accelerator for 2D scroll
 -FIXME: 4MB boards have banked memory (FbiInit2 bits 1 & 20)
  */
 
@@ -67,9 +71,6 @@
 
 #undef SST_DEBUG
 
-/* enable 24/32 bpp functions ? (completely untested!) */
-#undef EN_24_32_BPP
-
 /*
   Default video mode .
   0 800x600@60  took from glide
@@ -377,7 +378,11 @@ static void sstfb_clear_screen(struct fb_info *info)
  *      sstfb_check_var - Optional function.  Validates a var passed in.
  *      @var: frame buffer variable screen structure
  *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *     Limit to the abilities of a single chip as SLI is not supported
+ *     by this driver.
  */
+
 static int sstfb_check_var(struct fb_var_screeninfo *var,
                struct fb_info *info)
 {
@@ -390,7 +395,7 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
        unsigned int freq;
 
        if (sst_calc_pll(PICOS2KHZ(var->pixclock), &freq, &par->pll)) {
-               eprintk("Pixclock at %ld KHZ out of range\n",
+               printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n",
                                PICOS2KHZ(var->pixclock));
                return -EINVAL;
        }
@@ -409,27 +414,15 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
        case 0 ... 16 :
                var->bits_per_pixel = 16;
                break;
-#ifdef EN_24_32_BPP
-       case 17 ... 24 :
-               var->bits_per_pixel = 24;
-               break;
-       case 25 ... 32 :
-               var->bits_per_pixel = 32;
-               break;
-#endif
        default :
-               eprintk("Unsupported bpp %d\n", var->bits_per_pixel);
+               printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel);
                return -EINVAL;
        }
        
        /* validity tests */
-       if ((var->xres <= 1) || (yDim <= 0 )
-          || (var->hsync_len <= 1)
-          || (hSyncOff <= 1)
-          || (var->left_margin <= 2)
-          || (vSyncOn <= 0)
-          || (vSyncOff <= 0)
-          || (vBackPorch <= 0)) {
+       if (var->xres <= 1 || yDim <= 0 || var->hsync_len <= 1  ||
+           hSyncOff <= 1  || var->left_margin <= 2  || vSyncOn <= 0 ||
+           vSyncOff <= 0 || vBackPorch <= 0) {
                return -EINVAL;
        }
 
@@ -437,21 +430,17 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
                /* Voodoo 2 limits */
                tiles_in_X = (var->xres + 63 ) / 64 * 2;                
 
-               if (((var->xres - 1) >= POW2(11)) || (yDim >= POW2(11))) {
-                       eprintk("Unsupported resolution %dx%d\n",
+               if (var->xres  > POW2(11) || yDim >= POW2(11)) {
+                       printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
                                 var->xres, var->yres);
                        return -EINVAL;
                }
 
-               if (((var->hsync_len-1) >= POW2(9))
-                  || ((hSyncOff-1) >= POW2(11))
-                  || ((var->left_margin - 2) >= POW2(9))
-                  || (vSyncOn >= POW2(13))
-                  || (vSyncOff >= POW2(13))
-                  || (vBackPorch >= POW2(9))
-                  || (tiles_in_X >= POW2(6))
-                  || (tiles_in_X <= 0)) {
-                       eprintk("Unsupported Timings\n");
+               if (var->hsync_len > POW2(9) || hSyncOff > POW2(11) ||
+                   var->left_margin - 2 >= POW2(9) || vSyncOn >= POW2(13) ||
+                   vSyncOff >= POW2(13) || vBackPorch >= POW2(9) ||
+                   tiles_in_X >= POW2(6) || tiles_in_X <= 0) {
+                       printk(KERN_ERR "sstfb: Unsupported timings\n");
                        return -EINVAL;
                }
        } else {
@@ -459,24 +448,20 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
                tiles_in_X = (var->xres + 63 ) / 64;
 
                if (var->vmode) {
-                       eprintk("Interlace/Doublescan not supported %#x\n",
+                       printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n",
                                var->vmode);
                        return -EINVAL;
                }
-               if (((var->xres - 1) >= POW2(10)) || (var->yres >= POW2(10))) {
-                       eprintk("Unsupported resolution %dx%d\n",
+               if (var->xres > POW2(10) || var->yres >= POW2(10)) {
+                       printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
                                 var->xres, var->yres);
                        return -EINVAL;
                }
-               if (((var->hsync_len - 1) >= POW2(8))
-                  || ((hSyncOff-1) >= POW2(10))
-                  || ((var->left_margin - 2) >= POW2(8))
-                  || (vSyncOn >= POW2(12))
-                  || (vSyncOff >= POW2(12))
-                  || (vBackPorch >= POW2(8))
-                  || (tiles_in_X >= POW2(4))
-                  || (tiles_in_X <= 0)) {
-                       eprintk("Unsupported Timings\n");
+               if (var->hsync_len > POW2(8) || hSyncOff - 1 > POW2(10) ||
+                   var->left_margin - 2 >= POW2(8) || vSyncOn >= POW2(12) ||
+                   vSyncOff >= POW2(12) || vBackPorch >= POW2(8) ||
+                   tiles_in_X >= POW2(4) || tiles_in_X <= 0) {
+                       printk(KERN_ERR "sstfb: Unsupported timings\n");
                        return -EINVAL;
                }
        }
@@ -486,8 +471,8 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
        real_length = tiles_in_X  * (IS_VOODOO2(par) ? 32 : 64 )
                      * ((var->bits_per_pixel == 16) ? 2 : 4);
 
-       if ((real_length * yDim) > info->fix.smem_len) {
-               eprintk("Not enough video memory\n");
+       if (real_length * yDim > info->fix.smem_len) {
+               printk(KERN_ERR "sstfb: Not enough video memory\n");
                return -ENOMEM;
        }
 
@@ -515,20 +500,6 @@ static int sstfb_check_var(struct fb_var_screeninfo *var,
                var->blue.offset   = 0;
                var->transp.offset = 0;
                break;
-#ifdef EN_24_32_BPP
-       case 24:        /* RGB 888 LfbMode 4 */
-       case 32:        /* ARGB 8888 LfbMode 5 */
-               var->red.length    = 8;
-               var->green.length  = 8;
-               var->blue.length   = 8;
-               var->transp.length = 0;
-
-               var->red.offset    = 16;
-               var->green.offset  = 8;
-               var->blue.offset   = 0;
-               var->transp.offset = 0; /* in 24bpp we fake a 32 bpp mode */
-               break;
-#endif
        default:
                return -EINVAL;
        }
@@ -653,13 +624,6 @@ static int sstfb_set_par(struct fb_info *info)
        case 16:
                fbiinit1 |=  SEL_SOURCE_VCLK_2X_SEL;
                break;
-#ifdef EN_24_32_BPP
-       case 24:
-       case 32:
-               /* sst_set_bits(FBIINIT1, SEL_SOURCE_VCLK_2X_DIV2 | EN_24BPP);*/
-               fbiinit1 |= SEL_SOURCE_VCLK_2X_SEL | EN_24BPP;
-               break;
-#endif
        default:
                return -EINVAL;
        }
@@ -690,14 +654,6 @@ static int sstfb_set_par(struct fb_info *info)
        case 16:
                lfbmode = LFB_565;
                break;
-#ifdef EN_24_32_BPP
-       case 24:
-               lfbmode = LFB_888;
-               break;
-       case 32:
-               lfbmode = LFB_8888;
-               break;
-#endif
        default:
                return -EINVAL;
        }
@@ -789,8 +745,7 @@ static int sstfb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
                        return -EFAULT;
                if (val > info->fix.smem_len)
                        val = info->fix.smem_len;
-               printk("filling %#x \n", val);
-               for (p=0 ; p<val; p+=2)
+               for (p = 0 ; p < val; p += 2)
                        writew(p >> 6, info->screen_base + p);
                return 0;
                
@@ -802,13 +757,10 @@ static int sstfb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
                pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
                                       tmp | PCI_EN_INIT_WR );
                fbiinit0 = sst_read (FBIINIT0);
-               if (val) {
+               if (val)
                        sst_write(FBIINIT0, fbiinit0 & ~EN_VGA_PASSTHROUGH);
-                       iprintk("Disabling VGA pass-through\n");
-               } else {
+               else
                        sst_write(FBIINIT0, fbiinit0 | EN_VGA_PASSTHROUGH);
-                       iprintk("Enabling VGA pass-through\n");
-               }
                pci_write_config_dword(sst_dev, PCI_INIT_ENABLE, tmp);
                return 0;
                
@@ -884,9 +836,9 @@ static int __devinit sst_get_memsize(struct fb_info *info, __u32 *memsize)
        u8 __iomem *fbbase_virt = info->screen_base;
 
        /* force memsize */
-       if ((mem >= 1 ) &&  (mem <= 4)) {
+       if (mem >= 1  && mem <= 4) {
                *memsize = (mem * 0x100000);
-               iprintk("supplied memsize: %#x\n", *memsize);
+               printk(KERN_INFO "supplied memsize: %#x\n", *memsize);
                return 1;
        }
 
@@ -927,7 +879,7 @@ static int __devinit sst_detect_att(struct fb_info *info)
        struct sstfb_par *par = info->par;
        int i, mir, dir;
 
-       for (i=0; i<3; i++) {
+       for (i = 0; i < 3; i++) {
                sst_dac_write(DACREG_WMA, 0);   /* backdoor */
                sst_dac_read(DACREG_RMR);       /* read 4 times RMR */
                sst_dac_read(DACREG_RMR);
@@ -940,7 +892,7 @@ static int __devinit sst_detect_att(struct fb_info *info)
                /*the 7th, device ID register */
                dir = sst_dac_read(DACREG_RMR);
                f_ddprintk("mir: %#x, dir: %#x\n", mir, dir);
-               if ((mir == DACREG_MIR_ATT ) && (dir == DACREG_DIR_ATT)) {
+               if (mir == DACREG_MIR_ATT && dir == DACREG_DIR_ATT) {
                        return 1;
                }
        }
@@ -1134,12 +1086,6 @@ static void sst_set_vidmod_att_ti(struct fb_info *info, const int bpp)
        case 16:
                sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_16BPP);
                break;
-#ifdef EN_24_32_BPP
-       case 24:
-       case 32:
-               sst_dac_write(DACREG_RMR, (cr0 & 0x0f) | DACREG_CR0_24BPP);
-               break;
-#endif
        default:
                dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp);
                break;
@@ -1154,12 +1100,6 @@ static void sst_set_vidmod_ics(struct fb_info *info, const int bpp)
        case 16:
                sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_16BPP);
                break;
-#ifdef EN_24_32_BPP
-       case 24:
-       case 32:
-               sst_dac_write(DACREG_ICS_CMD, DACREG_ICS_CMD_24BPP);
-               break;
-#endif
        default:
                dprintk("%s: bad depth '%u'\n", __FUNCTION__, bpp);
                break;
@@ -1250,7 +1190,7 @@ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par)
                                PCI_EN_INIT_WR | PCI_REMAP_DAC );
        /* detect dac type */
        if (!sst_detect_dactype(info, par)) {
-               eprintk("Unknown dac type\n");
+               printk(KERN_ERR "sstfb: unknown dac type.\n");
                //FIXME watch it: we are not in a safe state, bad bad bad.
                return 0;
        }
@@ -1258,10 +1198,10 @@ static int __devinit sst_init(struct fb_info *info, struct sstfb_par *par)
        /* set graphic clock */
        par->gfx_clock = spec->default_gfx_clock;
        if ((gfxclk >10 ) && (gfxclk < spec->max_gfxclk)) {
-               iprintk("Using supplied graphic freq : %dMHz\n", gfxclk);
+               printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk);
                 par->gfx_clock = gfxclk *1000;
        } else if (gfxclk) {
-               wprintk ("%dMhz is way out of spec! Using default\n", gfxclk);
+               printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk);
        }
 
        sst_calc_pll(par->gfx_clock, &Fout, &gfx_timings);
@@ -1396,7 +1336,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
 
        /* Enable device in PCI config. */
        if ((err=pci_enable_device(pdev))) {
-               eprintk("cannot enable device\n");
+               printk(KERN_ERR "cannot enable device\n");
                return err;
        }
 
@@ -1422,39 +1362,39 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
        fix->smem_start = fix->mmio_start + 0x400000;
 
        if (!request_mem_region(fix->mmio_start, fix->mmio_len, "sstfb MMIO")) {
-               eprintk("cannot reserve mmio memory\n");
+               printk(KERN_ERR "sstfb: cannot reserve mmio memory\n");
                goto fail_mmio_mem;
        }
 
        if (!request_mem_region(fix->smem_start, 0x400000,"sstfb FB")) {
-               eprintk("cannot reserve fb memory\n");
+               printk(KERN_ERR "sstfb: cannot reserve fb memory\n");
                goto fail_fb_mem;
        }
 
        par->mmio_vbase = ioremap_nocache(fix->mmio_start,
                                        fix->mmio_len);
        if (!par->mmio_vbase) {
-               eprintk("cannot remap register area %#lx\n",
+               printk(KERN_ERR "sstfb: cannot remap register area %#lx\n",
                        fix->mmio_start);
                goto fail_mmio_remap;
        }
        info->screen_base = ioremap_nocache(fix->smem_start, 0x400000);
        if (!info->screen_base) {
-               eprintk("cannot remap framebuffer %#lx\n",
+               printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n",
                        fix->smem_start);
                goto fail_fb_remap;
        }
 
        if (!sst_init(info, par)) {
-               eprintk("Init failed\n");
+               printk(KERN_ERR "sstfb: Init failed\n");
                goto fail;
        }
        sst_get_memsize(info, &fix->smem_len);
        strlcpy(fix->id, spec->name, sizeof(fix->id));
 
-       iprintk("%s (revision %d) with %s dac\n",
+       printk(KERN_INFO "%s (revision %d) with %s dac\n",
                fix->id, par->revision, par->dac_sw.name);
-       iprintk("framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
+       printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
                fix->smem_start, info->screen_base,
                fix->smem_len >> 20);
 
@@ -1471,24 +1411,25 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
        fix->accel      = FB_ACCEL_NONE;  /* FIXME */
        /*
         * According to the specs, the linelength must be of 1024 *pixels*
-        * and the 24bpp mode is in fact a 32 bpp mode.
+        * and the 24bpp mode is in fact a 32 bpp mode (and both are in
+        * fact dithered to 16bit).
         */
        fix->line_length = 2048; /* default value, for 24 or 32bit: 4096 */
        
        if ( mode_option &&
             fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 16)) {
-               eprintk("can't set supplied video mode. Using default\n");
+               printk(KERN_ERR "sstfb: can't set supplied video mode. Using default\n");
                info->var = sstfb_default;
        } else
                info->var = sstfb_default;
 
        if (sstfb_check_var(&info->var, info)) {
-               eprintk("invalid default video mode.\n");
+               printk(KERN_ERR "sstfb: invalid default video mode.\n");
                goto fail;
        }
 
        if (sstfb_set_par(info)) {
-               eprintk("can't set default video mode.\n");
+               printk(KERN_ERR "sstfb: can't set default video mode.\n");
                goto fail;
        }
        
@@ -1497,7 +1438,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
        /* register fb */
        info->device = &pdev->dev;
        if (register_framebuffer(info) < 0) {
-               eprintk("can't register framebuffer.\n");
+               printk(KERN_ERR "sstfb: can't register framebuffer.\n");
                goto fail;
        }
 
@@ -1711,4 +1652,3 @@ module_param(gfxclk, int, 0);
 MODULE_PARM_DESC(gfxclk, "Force graphic chip frequency in MHz. DANGEROUS. (default=auto)");
 module_param(slowpci, bool, 0);
 MODULE_PARM_DESC(slowpci, "Uses slow PCI settings (0 or 1) (default=0)");
-

diff --git a/include/video/sstfb.h b/include/video/sstfb.h
index 3570f9c..5dbf5e7 100644 (file)
--- a/include/video/sstfb.h
+++ b/include/video/sstfb.h
@@ -68,10 +68,6 @@
 #  define print_var(X,Y...)
 #endif
 
-#define eprintk(X...)  printk(KERN_ERR "sstfb: " X)
-#define iprintk(X...)  printk(KERN_INFO "sstfb: " X)
-#define wprintk(X...)  printk(KERN_WARNING "sstfb: " X)
-
 #define BIT(x)         (1ul<<(x))
 #define POW2(x)                (1ul<<(x))