--- /dev/null
+ =========================
+ MN10300 FUNCTION CALL ABI
+ =========================
+
+=======
+GENERAL
+=======
+
+The MN10300/AM33 kernel runs in little-endian mode; big-endian mode is not
+supported.
+
+The stack grows downwards, and should always be 32-bit aligned. There are
+separate stack pointer registers for userspace and the kernel.
+
+
+================
+ARGUMENT PASSING
+================
+
+The first two arguments (assuming up to 32-bits per argument) to a function are
+passed in the D0 and D1 registers respectively; all other arguments are passed
+on the stack.
+
+If 64-bit arguments are being passed, then they are never split between
+registers and the stack. If the first argument is a 64-bit value, it will be
+passed in D0:D1. If the first argument is not a 64-bit value, but the second
+is, the second will be passed entirely on the stack and D1 will be unused.
+
+Arguments smaller than 32-bits are not coelesced within a register or a stack
+word. For example, two byte-sized arguments will always be passed in separate
+registers or word-sized stack slots.
+
+
+=================
+CALLING FUNCTIONS
+=================
+
+The caller must allocate twelve bytes on the stack for the callee's use before
+it inserts a CALL instruction. The CALL instruction will write into the TOS
+word, but won't actually modify the stack pointer; similarly, the RET
+instruction reads from the TOS word of the stack, but doesn't move the stack
+pointer beyond it.
+
+
+ Stack:
+ | |
+ | |
+ |---------------| SP+20
+ | 4th Arg |
+ |---------------| SP+16
+ | 3rd Arg |
+ |---------------| SP+12
+ | D1 Save Slot |
+ |---------------| SP+8
+ | D0 Save Slot |
+ |---------------| SP+4
+ | Return Addr |
+ |---------------| SP
+ | |
+ | |
+
+
+The caller must leave space on the stack (hence an allocation of twelve bytes)
+in which the callee may store the first two arguments.
+
+
+============
+RETURN VALUE
+============
+
+The return value is passed in D0 for an integer (or D0:D1 for a 64-bit value),
+or A0 for a pointer.
+
+If the return value is a value larger than 64-bits, or is a structure or an
+array, then a hidden first argument will be passed to the callee by the caller:
+this will point to a piece of memory large enough to hold the result of the
+function. In this case, the callee will return the value in that piece of
+memory, and no value will be returned in D0 or A0.
+
+
+===================
+REGISTER CLOBBERING
+===================
+
+The values in certain registers may be clobbered by the callee, and other
+values must be saved:
+
+ Clobber: D0-D1, A0-A1, E0-E3
+ Save: D2-D3, A2-A3, E4-E7, SP
+
+All other non-supervisor-only registers are clobberable (such as MDR, MCRL,
+MCRH).
+
+
+=================
+SPECIAL REGISTERS
+=================
+
+Certain ordinary registers may carry special usage for the compiler:
+
+ A3: Frame pointer
+ E2: TLS pointer
+
+
+==========
+KERNEL ABI
+==========
+
+The kernel may use a slightly different ABI internally.
+
+ (*) E2
+
+ If CONFIG_MN10300_CURRENT_IN_E2 is defined, then the current task pointer
+ will be kept in the E2 register, and that register will be marked
+ unavailable for the compiler to use as a scratch register.
+
+ Normally the kernel uses something like:
+
+ MOV SP,An
+ AND 0xFFFFE000,An
+ MOV (An),Rm // Rm holds current
+ MOV (yyy,Rm) // Access current->yyy
+
+ To find the address of current; but since this option permits current to
+ be carried globally in an register, it can use:
+
+ MOV (yyy,E2) // Access current->yyy
+
+ instead.
+
+
+===============
+SYSTEM CALL ABI
+===============
+
+System calls are called with the following convention:
+
+ REGISTER ENTRY EXIT
+ =============== ======================= =======================
+ D0 Syscall number Return value
+ A0 1st syscall argument Saved
+ D1 2nd syscall argument Saved
+ A3 3rd syscall argument Saved
+ A2 4th syscall argument Saved
+ D3 5th syscall argument Saved
+ D2 6th syscall argument Saved
+
+All other registers are saved. The layout is a consequence of the way the MOVM
+instruction stores registers onto the stack.
--- /dev/null
+ =========================================
+ PART-SPECIFIC SOURCE COMPARTMENTALISATION
+ =========================================
+
+The sources for various parts are compartmentalised at two different levels:
+
+ (1) Processor level
+
+ The "processor level" is a CPU core plus the other on-silicon
+ peripherals.
+
+ Processor-specific header files are divided among directories in a similar
+ way to the CPU level:
+
+ (*) include/asm-mn10300/proc-mn103e010/
+
+ Support for the AM33v2 CPU core.
+
+ The appropriate processor is selected by a CONFIG_MN10300_PROC_YYYY option
+ from the "Processor support" choice menu in the arch/mn10300/Kconfig file.
+
+
+ (2) Unit level
+
+ The "unit level" is a processor plus all the external peripherals
+ controlled by that processor.
+
+ Unit-specific header files are divided among directories in a similar way
+ to the CPU level; not only that, but specific sources may also be
+ segregated into separate directories under the arch directory:
+
+ (*) include/asm-mn10300/unit-asb2303/
+ (*) arch/mn10300/unit-asb2303/
+
+ Support for the ASB2303 board with an ASB2308 daughter board.
+
+ (*) include/asm-mn10300/unit-asb2305/
+ (*) arch/mn10300/unit-asb2305/
+
+ Support for the ASB2305 board.
+
+ The appropriate processor is selected by a CONFIG_MN10300_UNIT_ZZZZ option
+ from the "Unit type" choice menu in the arch/mn10300/Kconfig file.
+
+
+============
+COMPILE TIME
+============
+
+When the kernel is compiled, symbolic links will be made in the asm header file
+directory for this arch:
+
+ include/asm-mn10300/proc => include/asm-mn10300/proc-YYYY/
+ include/asm-mn10300/unit => include/asm-mn10300/unit-ZZZZ/
+
+So that the header files contained in those directories can be accessed without
+lots of #ifdef-age.
+
+The appropriate arch/mn10300/unit-ZZZZ directory will also be entered by the
+compilation process; all other unit-specific directories will be ignored.
W: http://www.linux-mm.org
S: Maintained
+MEI MN10300/AM33 PORT
+P: David Howells
+M: dhowells@redhat.com
+P: Koichi Yasutake
+M: yasutake.koichi@jp.panasonic.com
+L: linux-am33-list@redhat.com
+W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
+S: Maintained
+
MEMORY TECHNOLOGY DEVICES (MTD)
P: David Woodhouse
M: dwmw2@infradead.org
--- /dev/null
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux Kernel Configuration"
+
+config MN10300
+ def_bool y
+
+config AM33
+ def_bool y
+
+config MMU
+ def_bool y
+
+config HIGHMEM
+ def_bool n
+
+config NUMA
+ def_bool n
+
+config UID16
+ def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config GENERIC_FIND_NEXT_BIT
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_TIME
+ def_bool y
+
+config GENERIC_BUG
+ def_bool y
+
+config QUICKLIST
+ def_bool y
+
+config ARCH_HAS_ILOG2_U32
+ def_bool y
+
+config ARCH_SUPPORTS_AOUT
+ def_bool n
+
+# Use the generic interrupt handling code in kernel/irq/
+config GENERIC_HARDIRQS
+ def_bool y
+
+config HOTPLUG_CPU
+ def_bool n
+
+mainmenu "Matsushita MN10300/AM33 Kernel Configuration"
+
+source "init/Kconfig"
+
+
+menu "Matsushita MN10300 system setup"
+
+choice
+ prompt "Unit type"
+ default MN10300_UNIT_ASB2303
+ help
+ This option specifies board for which the kernel will be
+ compiled. It affects the external peripherals catered for.
+
+config MN10300_UNIT_ASB2303
+ bool "ASB2303"
+
+config MN10300_UNIT_ASB2305
+ bool "ASB2305"
+
+endchoice
+
+choice
+ prompt "Processor support"
+ default MN10300_PROC_MN103E010
+ help
+ This option specifies the processor for which the kernel will be
+ compiled. It affects the on-chip peripherals catered for.
+
+config MN10300_PROC_MN103E010
+ bool "MN103E010"
+ depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
+ select MN10300_PROC_HAS_TTYSM0
+ select MN10300_PROC_HAS_TTYSM1
+ select MN10300_PROC_HAS_TTYSM2
+
+endchoice
+
+choice
+ prompt "Processor core support"
+ default MN10300_CPU_AM33V2
+ help
+ This option specifies the processor core for which the kernel will be
+ compiled. It affects the instruction set used.
+
+config MN10300_CPU_AM33V2
+ bool "AM33v2"
+
+endchoice
+
+config FPU
+ bool "FPU present"
+ default y
+ depends on MN10300_PROC_MN103E010
+
+choice
+ prompt "CPU Caching mode"
+ default MN10300_CACHE_WBACK
+ help
+ This option determines the caching mode for the kernel.
+
+ Write-Back caching mode involves the all reads and writes causing
+ the affected cacheline to be read into the cache first before being
+ operated upon. Memory is not then updated by a write until the cache
+ is filled and a cacheline needs to be displaced from the cache to
+ make room. Only at that point is it written back.
+
+ Write-Through caching only fetches cachelines from memory on a
+ read. Writes always get written directly to memory. If the affected
+ cacheline is also in cache, it will be updated too.
+
+ The final option is to turn of caching entirely.
+
+config MN10300_CACHE_WBACK
+ bool "Write-Back"
+
+config MN10300_CACHE_WTHRU
+ bool "Write-Through"
+
+config MN10300_CACHE_DISABLED
+ bool "Disabled"
+
+endchoice
+
+menu "Memory layout options"
+
+config KERNEL_RAM_BASE_ADDRESS
+ hex "Base address of kernel RAM"
+ default "0x90000000"
+
+config INTERRUPT_VECTOR_BASE
+ hex "Base address of vector table"
+ default "0x90000000"
+ help
+ The base address of the vector table will be programmed into
+ the TBR register. It must be on 16MiB address boundary.
+
+config KERNEL_TEXT_ADDRESS
+ hex "Base address of kernel"
+ default "0x90001000"
+
+config KERNEL_ZIMAGE_BASE_ADDRESS
+ hex "Base address of compressed vmlinux image"
+ default "0x90700000"
+
+endmenu
+
+config PREEMPT
+ bool "Preemptible Kernel"
+ help
+ This option reduces the latency of the kernel when reacting to
+ real-time or interactive events by allowing a low priority process to
+ be preempted even if it is in kernel mode executing a system call.
+ This allows applications to run more reliably even when the system is
+ under load.
+
+ Say Y here if you are building a kernel for a desktop, embedded
+ or real-time system. Say N if you are unsure.
+
+config PREEMPT_BKL
+ bool "Preempt The Big Kernel Lock"
+ depends on PREEMPT
+ default y
+ help
+ This option reduces the latency of the kernel by making the
+ big kernel lock preemptible.
+
+ Say Y here if you are building a kernel for a desktop system.
+ Say N if you are unsure.
+
+config MN10300_CURRENT_IN_E2
+ bool "Hold current task address in E2 register"
+ default y
+ help
+ This option removes the E2/R2 register from the set available to gcc
+ for normal use and instead uses it to store the address of the
+ current process's task_struct whilst in the kernel.
+
+ This means the kernel doesn't need to calculate the address each time
+ "current" is used (take SP, AND with mask and dereference pointer
+ just to get the address), and instead can just use E2+offset
+ addressing each time.
+
+ This has no effect on userspace.
+
+config MN10300_USING_JTAG
+ bool "Using JTAG to debug kernel"
+ default y
+ help
+ This options indicates that JTAG will be used to debug the kernel. It
+ suppresses the use of certain hardware debugging features, such as
+ single-stepping, which are taken over completely by the JTAG unit.
+
+config MN10300_RTC
+ bool "Using MN10300 RTC"
+ depends on MN10300_PROC_MN103E010
+ default n
+ help
+
+ This option enables support for the RTC, thus enabling time to be
+ tracked, even when system is powered down. This is available on-chip
+ on the MN103E010.
+
+config MN10300_WD_TIMER
+ bool "Using MN10300 watchdog timer"
+ default y
+ help
+ This options indicates that the watchdog timer will be used.
+
+config PCI
+ bool "Use PCI"
+ depends on MN10300_UNIT_ASB2305
+ default y
+ help
+ Some systems (such as the ASB2305) have PCI onboard. If you have one
+ of these boards and you wish to use the PCI facilities, say Y here.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+menu "MN10300 internal serial options"
+
+config MN10300_PROC_HAS_TTYSM0
+ bool
+ default n
+
+config MN10300_PROC_HAS_TTYSM1
+ bool
+ default n
+
+config MN10300_PROC_HAS_TTYSM2
+ bool
+ default n
+
+config MN10300_TTYSM
+ bool "Support for ttySM serial ports"
+ depends on MN10300
+ default y
+ select SERIAL_CORE
+ help
+ This option enables support for the on-chip serial ports that the
+ MN10300 has available.
+
+config MN10300_TTYSM_CONSOLE
+ bool "Support for console on ttySM serial ports"
+ depends on MN10300_TTYSM
+ select SERIAL_CORE_CONSOLE
+ help
+ This option enables support for a console on the on-chip serial ports
+ that the MN10300 has available.
+
+#
+# /dev/ttySM0
+#
+config MN10300_TTYSM0
+ bool "Enable SIF0 (/dev/ttySM0)"
+ depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0
+ help
+ Enable access to SIF0 through /dev/ttySM0 or gdb-stub
+
+choice
+ prompt "Select the timer to supply the clock for SIF0"
+ default MN10300_TTYSM0_TIMER8
+ depends on MN10300_TTYSM0
+
+config MN10300_TTYSM0_TIMER8
+ bool "Use timer 8 (16-bit)"
+
+config MN10300_TTYSM0_TIMER2
+ bool "Use timer 2 (8-bit)"
+
+endchoice
+
+#
+# /dev/ttySM1
+#
+config MN10300_TTYSM1
+ bool "Enable SIF1 (/dev/ttySM1)"
+ depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1
+ help
+ Enable access to SIF1 through /dev/ttySM1 or gdb-stub
+
+choice
+ prompt "Select the timer to supply the clock for SIF1"
+ default MN10300_TTYSM0_TIMER9
+ depends on MN10300_TTYSM1
+
+config MN10300_TTYSM1_TIMER9
+ bool "Use timer 9 (16-bit)"
+
+config MN10300_TTYSM1_TIMER3
+ bool "Use timer 3 (8-bit)"
+
+endchoice
+
+#
+# /dev/ttySM2
+#
+config MN10300_TTYSM2
+ bool "Enable SIF2 (/dev/ttySM2)"
+ depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2
+ help
+ Enable access to SIF2 through /dev/ttySM2 or gdb-stub
+
+choice
+ prompt "Select the timer to supply the clock for SIF2"
+ default MN10300_TTYSM0_TIMER10
+ depends on MN10300_TTYSM2
+
+config MN10300_TTYSM2_TIMER10
+ bool "Use timer 10 (16-bit)"
+
+endchoice
+
+config MN10300_TTYSM2_CTS
+ bool "Enable the use of the CTS line /dev/ttySM2"
+ depends on MN10300_TTYSM2
+
+endmenu
+
+source "mm/Kconfig"
+
+menu "Power management options"
+source kernel/power/Kconfig
+endmenu
+
+endmenu
+
+
+menu "Executable formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/mn10300/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+source "arch/mn10300/oprofile/Kconfig"
--- /dev/null
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL
+
+config DEBUG_DECOMPRESS_KERNEL
+ bool "Using serial port during decompressing kernel"
+ depends on DEBUG_KERNEL
+ default n
+ help
+ If you say Y here you will confirm the start and the end of
+ decompressing Linux seeing "Uncompressing Linux... " and
+ "Ok, booting the kernel.\n" on console.
+
+config KPROBES
+ bool "Kprobes"
+ depends on DEBUG_KERNEL
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+
+config GDBSTUB
+ bool "Remote GDB kernel debugging"
+ depends on DEBUG_KERNEL
+ select DEBUG_INFO
+ select FRAME_POINTER
+ help
+ If you say Y here, it will be possible to remotely debug the kernel
+ using gdb. This enlarges your kernel ELF image disk size by several
+ megabytes and requires a machine with more than 16 MB, better 32 MB
+ RAM to avoid excessive linking time. This is only useful for kernel
+ hackers. If unsure, say N.
+
+config GDBSTUB_IMMEDIATE
+ bool "Break into GDB stub immediately"
+ depends on GDBSTUB
+ help
+ If you say Y here, GDB stub will break into the program as soon as
+ possible, leaving the program counter at the beginning of
+ start_kernel() in init/main.c.
+
+config GDB_CONSOLE
+ bool "Console output to GDB"
+ depends on GDBSTUB
+ help
+ If you are using GDB for remote debugging over a serial port and
+ would like kernel messages to be formatted into GDB $O packets so
+ that GDB prints them as program output, say 'Y'.
+
+config GDBSTUB_DEBUGGING
+ bool "Debug GDB stub by messages to serial port"
+ depends on GDBSTUB
+ help
+ This causes debugging messages to be displayed at various points
+ during execution of the GDB stub routines. Such messages will be
+ displayed on ttyS0 if that isn't the GDB stub's port, or ttySM0
+ otherwise.
+
+config GDBSTUB_DEBUG_ENTRY
+ bool "Debug GDB stub entry"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about entry to or exit
+ from the main GDB stub routine.
+
+config GDBSTUB_DEBUG_PROTOCOL
+ bool "Debug GDB stub protocol"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about the GDB remote
+ protocol messages generated exchanged with GDB.
+
+config GDBSTUB_DEBUG_IO
+ bool "Debug GDB stub I/O"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about GDB stub's
+ low-level I/O.
+
+config GDBSTUB_DEBUG_BREAKPOINT
+ bool "Debug GDB stub breakpoint management"
+ depends on GDBSTUB_DEBUGGING
+ help
+ This option causes information to be displayed about GDB stub's
+ breakpoint management.
+
+choice
+ prompt "GDB stub port"
+ default GDBSTUB_TTYSM0
+ depends on GDBSTUB
+ help
+ Select the serial port used for GDB-stub.
+
+config GDBSTUB_ON_TTYSM0
+ bool "/dev/ttySM0 [SIF0]"
+ depends on MN10300_TTYSM0
+ select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYSM1
+ bool "/dev/ttySM1 [SIF1]"
+ depends on MN10300_TTYSM1
+ select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYSM2
+ bool "/dev/ttySM2 [SIF2]"
+ depends on MN10300_TTYSM2
+ select GDBSTUB_ON_TTYSMx
+
+config GDBSTUB_ON_TTYS0
+ bool "/dev/ttyS0"
+ select GDBSTUB_ON_TTYSx
+
+config GDBSTUB_ON_TTYS1
+ bool "/dev/ttyS1"
+ select GDBSTUB_ON_TTYSx
+
+endchoice
+
+config GDBSTUB_ON_TTYSMx
+ bool
+ depends on GDBSTUB_ON_TTYSM0 || GDBSTUB_ON_TTYSM1 || GDBSTUB_ON_TTYSM2
+ default y
+
+config GDBSTUB_ON_TTYSx
+ bool
+ depends on GDBSTUB_ON_TTYS0 || GDBSTUB_ON_TTYS1
+ default y
+
+endmenu
--- /dev/null
+###############################################################################
+#
+# MN10300 Kernel makefile system specifications
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+
+KBUILD_DEFCONFIG := asb2303_defconfig
+
+CCSPECS := $(shell $(CC) -v 2>&1 | grep "^Reading specs from " | head -1 | cut -c20-)
+CCDIR := $(strip $(patsubst %/specs,%,$(CCSPECS)))
+KBUILD_CPPFLAGS += -nostdinc -I$(CCDIR)/include
+
+LDFLAGS :=
+OBJCOPYFLAGS := -O binary -R .note -R .comment -S
+#LDFLAGS_vmlinux := -Map linkmap.txt
+CHECKFLAGS +=
+
+PROCESSOR := unset
+UNIT := unset
+
+KBUILD_CFLAGS += -mam33 -mmem-funcs -DCPU=AM33
+KBUILD_AFLAGS += -mam33 -DCPU=AM33
+
+ifeq ($(CONFIG_MN10300_CURRENT_IN_E2),y)
+KBUILD_CFLAGS += -ffixed-e2 -fcall-saved-e5
+endif
+
+ifeq ($(CONFIG_MN10300_PROC_MN103E010),y)
+PROCESSOR := mn103e010
+endif
+
+ifeq ($(CONFIG_MN10300_UNIT_ASB2303),y)
+UNIT := asb2303
+endif
+ifeq ($(CONFIG_MN10300_UNIT_ASB2305),y)
+UNIT := asb2305
+endif
+
+
+head-y := arch/mn10300/kernel/head.o arch/mn10300/kernel/init_task.o
+
+core-y += arch/mn10300/kernel/ arch/mn10300/mm/
+
+ifneq ($(PROCESSOR),unset)
+core-y += arch/mn10300/proc-$(PROCESSOR)/
+endif
+ifneq ($(UNIT),unset)
+core-y += arch/mn10300/unit-$(UNIT)/
+endif
+libs-y += arch/mn10300/lib/
+
+drivers-$(CONFIG_OPROFILE) += arch/mn10300/oprofile/
+
+boot := arch/mn10300/boot
+
+.PHONY: zImage
+
+KBUILD_IMAGE := $(boot)/zImage
+CLEAN_FILES += $(boot)/zImage
+CLEAN_FILES += $(boot)/compressed/vmlinux
+CLEAN_FILES += $(boot)/compressed/vmlinux.bin
+CLEAN_FILES += $(boot)/compressed/vmlinux.bin.gz
+
+zImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+all: zImage
+
+bootstrap:
+ $(Q)$(MAKEBOOT) bootstrap
+
+archclean:
+ $(Q)$(MAKE) $(clean)=arch/mn10300/proc-mn103e010
+ $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2303
+ $(Q)$(MAKE) $(clean)=arch/mn10300/unit-asb2305
+
+define archhelp
+ echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
+endef
+
+# If you make sure the .S files get compiled with debug info,
+# uncomment the following to disable optimisations
+# that are unhelpful whilst debugging.
+ifdef CONFIG_DEBUG_INFO
+#KBUILD_CFLAGS += -O1
+KBUILD_AFLAGS += -Wa,--gdwarf2
+endif
+
+###################################################################################################
+#
+# juggle some symlinks in the MN10300 asm include dir
+#
+# Update machine proc and unit symlinks if something which affects
+# them changed. We use .proc / .unit to indicate when they were
+# updated last, otherwise make uses the target directory mtime.
+#
+###################################################################################################
+
+# processor specific definitions
+include/asm-mn10300/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf
+ @echo ' SYMLINK include/asm-mn10300/proc -> include/asm-mn10300/proc-$(PROCESSOR)'
+ifneq ($(KBUILD_SRC),)
+ $(Q)mkdir -p include/asm-mn10300
+ $(Q)ln -fsn $(srctree)/include/asm-mn10300/proc-$(PROCESSOR) include/asm-mn10300/proc
+else
+ $(Q)ln -fsn proc-$(PROCESSOR) include/asm-mn10300/proc
+endif
+ @touch $@
+
+CLEAN_FILES += include/asm-mn10300/proc include/asm-mn10300/.proc
+
+prepare: include/asm-mn10300/.proc
+
+# unit specific definitions
+include/asm-mn10300/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf
+ @echo ' SYMLINK include/asm-mn10300/unit -> include/asm-mn10300/unit-$(UNIT)'
+ifneq ($(KBUILD_SRC),)
+ $(Q)mkdir -p include/asm-mn10300
+ $(Q)ln -fsn $(srctree)/include/asm-mn10300/unit-$(UNIT) include/asm-mn10300/unit
+else
+ $(Q)ln -fsn unit-$(UNIT) include/asm-mn10300/unit
+endif
+ @touch $@
+
+CLEAN_FILES += include/asm-mn10300/unit include/asm-mn10300/.unit
+
+prepare: include/asm-mn10300/.unit
--- /dev/null
+# MN10300 kernel compressor and wrapper
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+
+targets := vmlinux.bin zImage
+
+subdir- := compressed
+
+# ---------------------------------------------------------------------------
+
+
+$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo 'Kernel: $@ is ready'
+
+$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/compressed/vmlinux: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
--- /dev/null
+#
+# Create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
+
+LDFLAGS_vmlinux := -Ttext $(CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS) -e startup_32
+
+$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+LDFLAGS_piggy.o := -r --format binary --oformat elf32-am33lin -T
+
+$(obj)/piggy.o: $(obj)/vmlinux.lds $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,ld)
--- /dev/null
+/* Boot entry point for a compressed MN10300 kernel
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+ .section .text
+
+#define DEBUG
+
+#include <linux/linkage.h>
+#include <asm/cpu-regs.h>
+
+ .globl startup_32
+startup_32:
+ # first save off parameters from bootloader
+ mov param_save_area,a0
+ mov d0,(a0)
+ mov d1,(4,a0)
+ mov d2,(8,a0)
+
+ mov sp,a3
+ mov decomp_stack+0x2000-4,a0
+ mov a0,sp
+
+ # invalidate and enable both of the caches
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0) # turn off first
+ mov CHCTR_ICINV|CHCTR_DCINV,d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
+ lne
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD,d0 # writethru dcache
+ movhu d0,(a0) # enable
+
+ # clear the BSS area
+ mov __bss_start,a0
+ mov _end,a1
+ clr d0
+bssclear:
+ cmp a1,a0
+ bge bssclear_end
+ movbu d0,(a0)
+ inc a0
+ bra bssclear
+bssclear_end:
+
+ # decompress the kernel
+ call decompress_kernel[],0
+
+ # disable caches again
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
+ lne
+
+ mov param_save_area,a0
+ mov (a0),d0
+ mov (4,a0),d1
+ mov (8,a0),d2
+
+ mov a3,sp
+ mov CONFIG_KERNEL_TEXT_ADDRESS,a0
+ jmp (a0)
+
+ .data
+ .align 4
+param_save_area:
+ .rept 3
+ .word 0
+ .endr
+
+ .section .bss
+ .align 4
+decomp_stack:
+ .space 0x2000
--- /dev/null
+/* MN10300 Miscellaneous helper routines for kernel decompressor
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from arch/x86/boot/compressed/misc_32.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/compiler.h>
+#include <asm/serial-regs.h>
+#include "misc.h"
+
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+/* display 'Uncompressing Linux... ' messages on ttyS0 or ttyS1 */
+#if 1 /* ttyS0 */
+#define CYG_DEV_BASE 0xA6FB0000
+#else /* ttyS1 */
+#define CYG_DEV_BASE 0xA6FC0000
+#endif
+
+#define CYG_DEV_THR (*((volatile __u8*)(CYG_DEV_BASE + 0x00)))
+#define CYG_DEV_MCR (*((volatile __u8*)(CYG_DEV_BASE + 0x10)))
+#define SIO_MCR_DTR 0x01
+#define SIO_MCR_RTS 0x02
+#define CYG_DEV_LSR (*((volatile __u8*)(CYG_DEV_BASE + 0x14)))
+#define SIO_LSR_THRE 0x20 /* transmitter holding register empty */
+#define SIO_LSR_TEMT 0x40 /* transmitter register empty */
+#define CYG_DEV_MSR (*((volatile __u8*)(CYG_DEV_BASE + 0x18)))
+#define SIO_MSR_CTS 0x10 /* clear to send */
+#define SIO_MSR_DSR 0x20 /* data set ready */
+
+#define LSR_WAIT_FOR(STATE) \
+ do { while (!(CYG_DEV_LSR & SIO_LSR_##STATE)) {} } while (0)
+#define FLOWCTL_QUERY(LINE) \
+ ({ CYG_DEV_MSR & SIO_MSR_##LINE; })
+#define FLOWCTL_WAIT_FOR(LINE) \
+ do { while (!(CYG_DEV_MSR & SIO_MSR_##LINE)) {} } while (0)
+#define FLOWCTL_CLEAR(LINE) \
+ do { CYG_DEV_MCR &= ~SIO_MCR_##LINE; } while (0)
+#define FLOWCTL_SET(LINE) \
+ do { CYG_DEV_MCR |= SIO_MCR_##LINE; } while (0)
+#endif
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+#undef memset
+#undef memcpy
+
+static inline void *memset(const void *s, int c, size_t n)
+{
+ int i;
+ char *ss = (char *) s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return (void *)s;
+}
+
+#define memzero(s, n) memset((s), 0, (n))
+
+static inline void *memcpy(void *__dest, const void *__src, size_t __n)
+{
+ int i;
+ const char *s = __src;
+ char *d = __dest;
+
+ for (i = 0; i < __n; i++)
+ d[i] = s[i];
+ return __dest;
+}
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, and a power of
+ * two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* sliding window buffer */
+
+static unsigned insize; /* valid bytes in inbuf */
+static unsigned inptr; /* index of next byte to be processed in inbuf */
+static unsigned outcnt; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond, msg) { if (!(cond)) error(msg); }
+# define Trace(x) fprintf x
+# define Tracev(x) { if (verbose) fprintf x ; }
+# define Tracevv(x) { if (verbose > 1) fprintf x ; }
+# define Tracec(c, x) { if (verbose && (c)) fprintf x ; }
+# define Tracecv(c, x) { if (verbose > 1 && (c)) fprintf x ; }
+#else
+# define Assert(cond, msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c, x)
+# define Tracecv(c, x)
+#endif
+
+static int fill_inbuf(void);
+static void flush_window(void);
+static void error(const char *) __attribute__((noreturn));
+static void kputs(const char *);
+
+static inline unsigned char get_byte(void)
+{
+ unsigned char ch = inptr < insize ? inbuf[inptr++] : fill_inbuf();
+
+#if 0
+ char hex[3];
+ hex[0] = ((ch & 0x0f) > 9) ?
+ ((ch & 0x0f) + 'A' - 0xa) : ((ch & 0x0f) + '0');
+ hex[1] = ((ch >> 4) > 9) ?
+ ((ch >> 4) + 'A' - 0xa) : ((ch >> 4) + '0');
+ hex[2] = 0;
+ kputs(hex);
+#endif
+ return ch;
+}
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define EXT_MEM_K (*(unsigned short *)0x90002)
+#ifndef STANDARD_MEMORY_BIOS_CALL
+#define ALT_MEM_K (*(unsigned long *) 0x901e0)
+#endif
+#define SCREEN_INFO (*(struct screen_info *)0x90000)
+
+static long bytes_out;
+static uch *output_data;
+static unsigned long output_ptr;
+
+
+static void *malloc(int size);
+
+static inline void free(void *where)
+{ /* Don't care */
+}
+
+static unsigned long free_mem_ptr = (unsigned long) &end;
+static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
+
+static inline void gzip_mark(void **ptr)
+{
+ kputs(".");
+ *ptr = (void *) free_mem_ptr;
+}
+
+static inline void gzip_release(void **ptr)
+{
+ free_mem_ptr = (unsigned long) *ptr;
+}
+
+#define INPLACE_MOVE_ROUTINE 0x1000
+#define LOW_BUFFER_START 0x2000
+#define LOW_BUFFER_END 0x90000
+#define LOW_BUFFER_SIZE (LOW_BUFFER_END - LOW_BUFFER_START)
+#define HEAP_SIZE 0x3000
+static int high_loaded;
+static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/;
+
+static char *vidmem = (char *)0xb8000;
+static int lines, cols;
+
+#include "../../../../lib/inflate.c"
+
+static void *malloc(int size)
+{
+ void *p;
+
+ if (size < 0)
+ error("Malloc error\n");
+ if (!free_mem_ptr)
+ error("Memory error\n");
+
+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
+
+ p = (void *) free_mem_ptr;
+ free_mem_ptr += size;
+
+ if (free_mem_ptr >= free_mem_end_ptr)
+ error("\nOut of memory\n");
+
+ return p;
+}
+
+static inline void scroll(void)
+{
+ int i;
+
+ memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
+ for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
+ vidmem[i] = ' ';
+}
+
+static inline void kputchar(unsigned char ch)
+{
+#ifdef CONFIG_MN10300_UNIT_ASB2305
+ while (SC0STR & SC01STR_TBF)
+ continue;
+
+ if (ch == 0x0a) {
+ SC0TXB = 0x0d;
+ while (SC0STR & SC01STR_TBF)
+ continue;
+ }
+
+ SC0TXB = ch;
+
+#else
+ while (SC1STR & SC01STR_TBF)
+ continue;
+
+ if (ch == 0x0a) {
+ SC1TXB = 0x0d;
+ while (SC1STR & SC01STR_TBF)
+ continue;
+ }
+
+ SC1TXB = ch;
+
+#endif
+}
+
+static void kputs(const char *s)
+{
+#ifdef CONFIG_DEBUG_DECOMPRESS_KERNEL
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ while (*s) {
+ LSR_WAIT_FOR(THRE);
+
+ ch = *s++;
+ if (ch == 0x0a) {
+ CYG_DEV_THR = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ }
+ CYG_DEV_THR = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+#else
+
+ for (; *s; s++)
+ kputchar(*s);
+
+#endif
+#endif /* CONFIG_DEBUG_DECOMPRESS_KERNEL */
+}
+
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty
+ * and at least one byte is really needed.
+ */
+static int fill_inbuf()
+{
+ if (insize != 0)
+ error("ran out of input data\n");
+
+ inbuf = input_data;
+ insize = input_len;
+ inptr = 1;
+ return inbuf[0];
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+static void flush_window_low(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out++ = *in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void flush_window_high(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, ch;
+ in = window;
+ for (n = 0; n < outcnt; n++) {
+ ch = *output_data++ = *in++;
+ if ((ulg) output_data == LOW_BUFFER_END)
+ output_data = high_buffer_start;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void flush_window(void)
+{
+ if (high_loaded)
+ flush_window_high();
+ else
+ flush_window_low();
+}
+
+static void error(const char *x)
+{
+ kputs("\n\n");
+ kputs(x);
+ kputs("\n\n -- System halted");
+
+ while (1)
+ /* Halt */;
+}
+
+#define STACK_SIZE (4096)
+
+long user_stack[STACK_SIZE];
+
+struct {
+ long *a;
+ short b;
+} stack_start = { &user_stack[STACK_SIZE], 0 };
+
+void setup_normal_output_buffer(void)
+{
+#ifdef STANDARD_MEMORY_BIOS_CALL
+ if (EXT_MEM_K < 1024)
+ error("Less than 2MB of memory.\n");
+#else
+ if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024)
+ error("Less than 2MB of memory.\n");
+#endif
+ output_data = (char *) 0x100000; /* Points to 1M */
+}
+
+struct moveparams {
+ uch *low_buffer_start;
+ int lcount;
+ uch *high_buffer_start;
+ int hcount;
+};
+
+void setup_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+ high_buffer_start = (uch *)(((ulg) &end) + HEAP_SIZE);
+#ifdef STANDARD_MEMORY_BIOS_CALL
+ if (EXT_MEM_K < (3 * 1024))
+ error("Less than 4MB of memory.\n");
+#else
+ if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3 * 1024))
+ error("Less than 4MB of memory.\n");
+#endif
+ mv->low_buffer_start = output_data = (char *) LOW_BUFFER_START;
+ high_loaded = 1;
+ free_mem_end_ptr = (long) high_buffer_start;
+ if (0x100000 + LOW_BUFFER_SIZE > (ulg) high_buffer_start) {
+ high_buffer_start = (uch *)(0x100000 + LOW_BUFFER_SIZE);
+ mv->hcount = 0; /* say: we need not to move high_buffer */
+ } else {
+ mv->hcount = -1;
+ }
+ mv->high_buffer_start = high_buffer_start;
+}
+
+void close_output_buffer_if_we_run_high(struct moveparams *mv)
+{
+ mv->lcount = bytes_out;
+ if (bytes_out > LOW_BUFFER_SIZE) {
+ mv->lcount = LOW_BUFFER_SIZE;
+ if (mv->hcount)
+ mv->hcount = bytes_out - LOW_BUFFER_SIZE;
+ } else {
+ mv->hcount = 0;
+ }
+}
+
+#undef DEBUGFLAG
+#ifdef DEBUGFLAG
+int debugflag;
+#endif
+
+int decompress_kernel(struct moveparams *mv)
+{
+#ifdef DEBUGFLAG
+ while (!debugflag)
+ barrier();
+#endif
+
+ output_data = (char *) CONFIG_KERNEL_TEXT_ADDRESS;
+
+ makecrc();
+ kputs("Uncompressing Linux... ");
+ gunzip();
+ kputs("Ok, booting the kernel.\n");
+ return 0;
+}
--- /dev/null
+/* Internal definitions for the MN10300 kernel decompressor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+extern int end;
+
+/*
+ * vmlinux.lds
+ */
+extern char input_data[];
+extern int input_len;
--- /dev/null
+SECTIONS
+{
+ .data : {
+ input_len = .;
+ LONG(input_data_end - input_data) input_data = .;
+ *(.data)
+ input_data_end = .;
+ }
+}
--- /dev/null
+#!/bin/sh
+#
+# arch/mn10300/boot/install -c.sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# Licence. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+#
+# "make install -c" script for i386 architecture
+#
+# Arguments:
+# $1 - kernel version
+# $2 - kernel image file
+# $3 - kernel map file
+# $4 - default install -c path (blank if root directory)
+# $5 - boot rom file
+#
+
+# User may have a custom install -c script
+
+rm -fr $4/../usr/include/linux $4/../usr/include/asm
+install -c -m 0755 $2 $4/vmlinuz
+install -c -m 0755 $5 $4/boot.rom
+install -c -m 0755 -d $4/../usr/include/linux
+cd $TOPDIR/include/linux
+for i in `find . -maxdepth 1 -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux
+done
+install -c -m 0755 -d $4/../usr/include/linux/byteorder
+cd $TOPDIR/include/linux/byteorder
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/byteorder
+done
+install -c -m 0755 -d $4/../usr/include/linux/lockd
+cd $TOPDIR/include/linux/lockd
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/lockd
+done
+install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4
+cd $TOPDIR/include/linux/netfilter_ipv4
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4
+done
+install -c -m 0755 -d $4/../usr/include/linux/nfsd
+cd $TOPDIR/include/linux/nfsd
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i
+done
+install -c -m 0755 -d $4/../usr/include/linux/raid
+cd $TOPDIR/include/linux/raid
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/raid
+done
+install -c -m 0755 -d $4/../usr/include/linux/sunrpc
+cd $TOPDIR/include/linux/sunrpc
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/linux/sunrpc
+done
+install -c -m 0755 -d $4/../usr/include/asm
+cd $TOPDIR/include/asm
+for i in `find . -name '*.h' -print`; do
+ install -c -m 0644 $i $4/../usr/include/asm
+done
--- /dev/null
+/*
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright (C) 1997 Martin Mares
+ */
+
+/*
+ * This file builds a disk-image from three different files:
+ *
+ * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - setup: 8086 machine code, sets up system parm
+ * - system: 80386 code for actual system
+ *
+ * It does some checking that all files are of the correct type, and
+ * just writes the result to stdout, removing headers and padding to
+ * the right amount. It also writes some system data to stderr.
+ */
+
+/*
+ * Changes by tytso to allow root device specification
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ * Cross compiling fixes by Gertjan van Wingerde, July 1996
+ * Rewritten by Martin Mares, April 1997
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <asm/boot.h>
+
+#define DEFAULT_MAJOR_ROOT 0
+#define DEFAULT_MINOR_ROOT 0
+
+/* Minimal number of setup sectors (see also bootsect.S) */
+#define SETUP_SECTS 4
+
+uint8_t buf[1024];
+int fd;
+int is_big_kernel;
+
+__attribute__((noreturn))
+void die(const char *str, ...)
+{
+ va_list args;
+ va_start(args, str);
+ vfprintf(stderr, str, args);
+ fputc('\n', stderr);
+ exit(1);
+}
+
+void file_open(const char *name)
+{
+ fd = open(name, O_RDONLY, 0);
+ if (fd < 0)
+ die("Unable to open `%s': %m", name);
+}
+
+__attribute__((noreturn))
+void usage(void)
+{
+ die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
+}
+
+int main(int argc, char **argv)
+{
+ unsigned int i, c, sz, setup_sectors;
+ uint32_t sys_size;
+ uint8_t major_root, minor_root;
+ struct stat sb;
+
+ if (argc > 2 && !strcmp(argv[1], "-b")) {
+ is_big_kernel = 1;
+ argc--, argv++;
+ }
+ if ((argc < 4) || (argc > 5))
+ usage();
+ if (argc > 4) {
+ if (!strcmp(argv[4], "CURRENT")) {
+ if (stat("/", &sb)) {
+ perror("/");
+ die("Couldn't stat /");
+ }
+ major_root = major(sb.st_dev);
+ minor_root = minor(sb.st_dev);
+ } else if (strcmp(argv[4], "FLOPPY")) {
+ if (stat(argv[4], &sb)) {
+ perror(argv[4]);
+ die("Couldn't stat root device.");
+ }
+ major_root = major(sb.st_rdev);
+ minor_root = minor(sb.st_rdev);
+ } else {
+ major_root = 0;
+ minor_root = 0;
+ }
+ } else {
+ major_root = DEFAULT_MAJOR_ROOT;
+ minor_root = DEFAULT_MINOR_ROOT;
+ }
+ fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
+
+ file_open(argv[1]);
+ i = read(fd, buf, sizeof(buf));
+ fprintf(stderr, "Boot sector %d bytes.\n", i);
+ if (i != 512)
+ die("Boot block must be exactly 512 bytes");
+ if (buf[510] != 0x55 || buf[511] != 0xaa)
+ die("Boot block hasn't got boot flag (0xAA55)");
+ buf[508] = minor_root;
+ buf[509] = major_root;
+ if (write(1, buf, 512) != 512)
+ die("Write call failed");
+ close(fd);
+
+ /* Copy the setup code */
+ file_open(argv[2]);
+ for (i = 0; (c = read(fd, buf, sizeof(buf))) > 0; i += c)
+ if (write(1, buf, c) != c)
+ die("Write call failed");
+ if (c != 0)
+ die("read-error on `setup'");
+ close(fd);
+
+ /* Pad unused space with zeros */
+ setup_sectors = (i + 511) / 512;
+ /* for compatibility with ancient versions of LILO. */
+ if (setup_sectors < SETUP_SECTS)
+ setup_sectors = SETUP_SECTS;
+ fprintf(stderr, "Setup is %d bytes.\n", i);
+ memset(buf, 0, sizeof(buf));
+ while (i < setup_sectors * 512) {
+ c = setup_sectors * 512 - i;
+ if (c > sizeof(buf))
+ c = sizeof(buf);
+ if (write(1, buf, c) != c)
+ die("Write call failed");
+ i += c;
+ }
+
+ file_open(argv[3]);
+ if (fstat(fd, &sb))
+ die("Unable to stat `%s': %m", argv[3]);
+ sz = sb.st_size;
+ fprintf(stderr, "System is %d kB\n", sz / 1024);
+ sys_size = (sz + 15) / 16;
+ /* 0x28000*16 = 2.5 MB, conservative estimate for the current maximum */
+ if (sys_size > (is_big_kernel ? 0x28000 : DEF_SYSSIZE))
+ die("System is too big. Try using %smodules.",
+ is_big_kernel ? "" : "bzImage or ");
+ if (sys_size > 0xffff)
+ fprintf(stderr,
+ "warning: kernel is too big for standalone boot "
+ "from floppy\n");
+ while (sz > 0) {
+ int l, n;
+
+ l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
+ n = read(fd, buf, l);
+ if (n != l) {
+ if (n < 0)
+ die("Error reading %s: %m", argv[3]);
+ else
+ die("%s: Unexpected EOF", argv[3]);
+ }
+ if (write(1, buf, l) != l)
+ die("Write failed");
+ sz -= l;
+ }
+ close(fd);
+
+ /* Write sizes to the bootsector */
+ if (lseek(1, 497, SEEK_SET) != 497)
+ die("Output: seek failed");
+ buf[0] = setup_sectors;
+ if (write(1, buf, 1) != 1)
+ die("Write of setup sector count failed");
+ if (lseek(1, 500, SEEK_SET) != 500)
+ die("Output: seek failed");
+ buf[0] = (sys_size & 0xff);
+ buf[1] = ((sys_size >> 8) & 0xff);
+ if (write(1, buf, 2) != 2)
+ die("Write of image length failed");
+
+ return 0;
+}
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc2
+# Fri Nov 16 13:36:38 2007
+#
+CONFIG_MN10300=y
+CONFIG_AM33=y
+CONFIG_MMU=y
+# CONFIG_HIGHMEM is not set
+# CONFIG_NUMA is not set
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_BUG=y
+CONFIG_QUICKLIST=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+# CONFIG_ARCH_SUPPORTS_AOUT is not set
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+# CONFIG_BLOCK is not set
+
+#
+# Matsushita MN10300 system setup
+#
+CONFIG_MN10300_UNIT_ASB2303=y
+# CONFIG_MN10300_UNIT_ASB2305 is not set
+CONFIG_MN10300_PROC_MN103E010=y
+CONFIG_MN10300_CPU_AM33V2=y
+CONFIG_FPU=y
+CONFIG_MN10300_CACHE_WBACK=y
+# CONFIG_MN10300_CACHE_WTHRU is not set
+# CONFIG_MN10300_CACHE_DISABLED is not set
+
+#
+# Memory layout options
+#
+CONFIG_KERNEL_RAM_BASE_ADDRESS=0x90000000
+CONFIG_INTERRUPT_VECTOR_BASE=0x90000000
+CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
+CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_BKL=y
+CONFIG_MN10300_CURRENT_IN_E2=y
+CONFIG_MN10300_USING_JTAG=y
+CONFIG_MN10300_RTC=y
+CONFIG_MN10300_WD_TIMER=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# MN10300 internal serial options
+#
+CONFIG_MN10300_PROC_HAS_TTYSM0=y
+CONFIG_MN10300_PROC_HAS_TTYSM1=y
+CONFIG_MN10300_PROC_HAS_TTYSM2=y
+CONFIG_MN10300_TTYSM=y
+CONFIG_MN10300_TTYSM_CONSOLE=y
+CONFIG_MN10300_TTYSM0=y
+CONFIG_MN10300_TTYSM0_TIMER8=y
+# CONFIG_MN10300_TTYSM0_TIMER2 is not set
+CONFIG_MN10300_TTYSM1=y
+CONFIG_MN10300_TTYSM1_TIMER9=y
+# CONFIG_MN10300_TTYSM1_TIMER3 is not set
+# CONFIG_MN10300_TTYSM2 is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=1
+CONFIG_VIRT_TO_BUS=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Executable formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
--- /dev/null
+#
+# Makefile for the MN10300-specific core kernel code
+#
+extra-y := head.o init_task.o vmlinux.lds
+
+obj-y := process.o semaphore.o signal.o entry.o fpu.o traps.o irq.o \
+ ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
+ switch_to.o mn10300_ksyms.o kernel_execve.o
+
+obj-$(CONFIG_MN10300_WD_TIMER) += mn10300-watchdog.o mn10300-watchdog-low.o
+
+obj-$(CONFIG_FPU) += fpu-low.o
+
+obj-$(CONFIG_MN10300_TTYSM) += mn10300-serial.o mn10300-serial-low.o \
+ mn10300-debug.o
+obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-low.o
+obj-$(CONFIG_GDBSTUB_ON_TTYSx) += gdb-io-serial.o gdb-io-serial-low.o
+obj-$(CONFIG_GDBSTUB_ON_TTYSMx) += gdb-io-ttysm.o gdb-io-ttysm-low.o
+
+ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+obj-$(CONFIG_GDBSTUB) += gdb-cache.o
+endif
+
+obj-$(CONFIG_MN10300_RTC) += rtc.o
+obj-$(CONFIG_PROFILE) += profile.o profile-low.o
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_KPROBES) += kprobes.o
--- /dev/null
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <asm/ucontext.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/ptrace.h>
+#include "sigframe.h"
+#include "mn10300-serial.h"
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->")
+
+#define OFFSET(sym, str, mem) \
+ DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+ OFFSET(SIGCONTEXT_d0, sigcontext, d0);
+ OFFSET(SIGCONTEXT_d1, sigcontext, d1);
+ BLANK();
+
+ OFFSET(TI_task, thread_info, task);
+ OFFSET(TI_exec_domain, thread_info, exec_domain);
+ OFFSET(TI_flags, thread_info, flags);
+ OFFSET(TI_cpu, thread_info, cpu);
+ OFFSET(TI_preempt_count, thread_info, preempt_count);
+ OFFSET(TI_addr_limit, thread_info, addr_limit);
+ OFFSET(TI_restart_block, thread_info, restart_block);
+ BLANK();
+
+ OFFSET(REG_D0, pt_regs, d0);
+ OFFSET(REG_D1, pt_regs, d1);
+ OFFSET(REG_D2, pt_regs, d2);
+ OFFSET(REG_D3, pt_regs, d3);
+ OFFSET(REG_A0, pt_regs, a0);
+ OFFSET(REG_A1, pt_regs, a1);
+ OFFSET(REG_A2, pt_regs, a2);
+ OFFSET(REG_A3, pt_regs, a3);
+ OFFSET(REG_E0, pt_regs, e0);
+ OFFSET(REG_E1, pt_regs, e1);
+ OFFSET(REG_E2, pt_regs, e2);
+ OFFSET(REG_E3, pt_regs, e3);
+ OFFSET(REG_E4, pt_regs, e4);
+ OFFSET(REG_E5, pt_regs, e5);
+ OFFSET(REG_E6, pt_regs, e6);
+ OFFSET(REG_E7, pt_regs, e7);
+ OFFSET(REG_SP, pt_regs, sp);
+ OFFSET(REG_EPSW, pt_regs, epsw);
+ OFFSET(REG_PC, pt_regs, pc);
+ OFFSET(REG_LAR, pt_regs, lar);
+ OFFSET(REG_LIR, pt_regs, lir);
+ OFFSET(REG_MDR, pt_regs, mdr);
+ OFFSET(REG_MCVF, pt_regs, mcvf);
+ OFFSET(REG_MCRL, pt_regs, mcrl);
+ OFFSET(REG_MCRH, pt_regs, mcrh);
+ OFFSET(REG_MDRQ, pt_regs, mdrq);
+ OFFSET(REG_ORIG_D0, pt_regs, orig_d0);
+ OFFSET(REG_NEXT, pt_regs, next);
+ DEFINE(REG__END, sizeof(struct pt_regs));
+ BLANK();
+
+ OFFSET(THREAD_UREGS, thread_struct, uregs);
+ OFFSET(THREAD_PC, thread_struct, pc);
+ OFFSET(THREAD_SP, thread_struct, sp);
+ OFFSET(THREAD_A3, thread_struct, a3);
+ OFFSET(THREAD_USP, thread_struct, usp);
+ OFFSET(THREAD_FRAME, thread_struct, __frame);
+ BLANK();
+
+ DEFINE(CLONE_VM_asm, CLONE_VM);
+ DEFINE(CLONE_FS_asm, CLONE_FS);
+ DEFINE(CLONE_FILES_asm, CLONE_FILES);
+ DEFINE(CLONE_SIGHAND_asm, CLONE_SIGHAND);
+ DEFINE(CLONE_UNTRACED_asm, CLONE_UNTRACED);
+ DEFINE(SIGCHLD_asm, SIGCHLD);
+ BLANK();
+
+ OFFSET(EXEC_DOMAIN_handler, exec_domain, handler);
+ OFFSET(RT_SIGFRAME_sigcontext, rt_sigframe, uc.uc_mcontext);
+
+ DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+
+ OFFSET(__rx_buffer, mn10300_serial_port, rx_buffer);
+ OFFSET(__rx_inp, mn10300_serial_port, rx_inp);
+ OFFSET(__rx_outp, mn10300_serial_port, rx_outp);
+ OFFSET(__tx_info_buffer, mn10300_serial_port, uart.info);
+ OFFSET(__tx_xchar, mn10300_serial_port, tx_xchar);
+ OFFSET(__tx_break, mn10300_serial_port, tx_break);
+ OFFSET(__intr_flags, mn10300_serial_port, intr_flags);
+ OFFSET(__rx_icr, mn10300_serial_port, rx_icr);
+ OFFSET(__tx_icr, mn10300_serial_port, tx_icr);
+ OFFSET(__tm_icr, mn10300_serial_port, _tmicr);
+ OFFSET(__iobase, mn10300_serial_port, _iobase);
+
+ DEFINE(__UART_XMIT_SIZE, UART_XMIT_SIZE);
+ OFFSET(__xmit_buffer, uart_info, xmit.buf);
+ OFFSET(__xmit_head, uart_info, xmit.head);
+ OFFSET(__xmit_tail, uart_info, xmit.tail);
+}
--- /dev/null
+###############################################################################
+#
+# MN10300 Exception and interrupt entry points
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/system.h>
+#include <asm/thread_info.h>
+#include <asm/intctl-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+#include <asm/asm-offsets.h>
+#include <asm/frame.inc>
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop __cli
+#else
+#define preempt_stop
+#define resume_kernel restore_all
+#endif
+
+ .macro __cli
+ and ~EPSW_IM,epsw
+ or EPSW_IE|MN10300_CLI_LEVEL,epsw
+ nop
+ nop
+ nop
+ .endm
+ .macro __sti
+ or EPSW_IE|EPSW_IM_7,epsw
+ .endm
+
+
+ .am33_2
+
+###############################################################################
+#
+# the return path for a forked child
+# - on entry, D0 holds the address of the previous task to run
+#
+###############################################################################
+ENTRY(ret_from_fork)
+ call schedule_tail[],0
+ GET_THREAD_INFO a2
+
+ # return 0 to indicate child process
+ clr d0
+ mov d0,(REG_D0,fp)
+ jmp syscall_exit
+
+###############################################################################
+#
+# system call handler
+#
+###############################################################################
+ENTRY(system_call)
+ add -4,sp
+ SAVE_ALL
+ mov d0,(REG_ORIG_D0,fp)
+ GET_THREAD_INFO a2
+ cmp nr_syscalls,d0
+ bcc syscall_badsys
+ btst _TIF_SYSCALL_TRACE,(TI_flags,a2)
+ bne syscall_trace_entry
+syscall_call:
+ add d0,d0,a1
+ add a1,a1
+ mov (REG_A0,fp),d0
+ mov (sys_call_table,a1),a0
+ calls (a0)
+ mov d0,(REG_D0,fp)
+syscall_exit:
+ # make sure we don't miss an interrupt setting need_resched or
+ # sigpending between sampling and the rti
+ __cli
+ mov (TI_flags,a2),d2
+ btst _TIF_ALLWORK_MASK,d2
+ bne syscall_exit_work
+restore_all:
+ RESTORE_ALL
+
+###############################################################################
+#
+# perform work that needs to be done immediately before resumption and syscall
+# tracing
+#
+###############################################################################
+ ALIGN
+syscall_exit_work:
+ btst _TIF_SYSCALL_TRACE,d2
+ beq work_pending
+ __sti # could let do_syscall_trace() call
+ # schedule() instead
+ mov fp,d0
+ mov 1,d1
+ call do_syscall_trace[],0 # do_syscall_trace(regs,entryexit)
+ jmp resume_userspace
+
+ ALIGN
+work_pending:
+ btst _TIF_NEED_RESCHED,d2
+ beq work_notifysig
+
+work_resched:
+ call schedule[],0
+
+ # make sure we don't miss an interrupt setting need_resched or
+ # sigpending between sampling and the rti
+ __cli
+
+ # is there any work to be done other than syscall tracing?
+ mov (TI_flags,a2),d2
+ btst _TIF_WORK_MASK,d2
+ beq restore_all
+ btst _TIF_NEED_RESCHED,d2
+ bne work_resched
+
+ # deal with pending signals and notify-resume requests
+work_notifysig:
+ mov fp,d0
+ mov d2,d1
+ call do_notify_resume[],0
+ jmp resume_userspace
+
+ # perform syscall entry tracing
+syscall_trace_entry:
+ mov -ENOSYS,d0
+ mov d0,(REG_D0,fp)
+ mov fp,d0
+ clr d1
+ call do_syscall_trace[],0
+ mov (REG_ORIG_D0,fp),d0
+ mov (REG_D1,fp),d1
+ cmp nr_syscalls,d0
+ bcs syscall_call
+ jmp syscall_exit
+
+syscall_badsys:
+ mov -ENOSYS,d0
+ mov d0,(REG_D0,fp)
+ jmp resume_userspace
+
+ # userspace resumption stub bypassing syscall exit tracing
+ .globl ret_from_exception, ret_from_intr
+ ALIGN
+ret_from_exception:
+ preempt_stop
+ret_from_intr:
+ GET_THREAD_INFO a2
+ mov (REG_EPSW,fp),d0 # need to deliver signals before
+ # returning to userspace
+ and EPSW_nSL,d0
+ beq resume_kernel # returning to supervisor mode
+
+ENTRY(resume_userspace)
+ # make sure we don't miss an interrupt setting need_resched or
+ # sigpending between sampling and the rti
+ __cli
+
+ # is there any work to be done on int/exception return?
+ mov (TI_flags,a2),d2
+ btst _TIF_WORK_MASK,d2
+ bne work_pending
+ jmp restore_all
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+ mov (TI_preempt_count,a2),d0 # non-zero preempt_count ?
+ cmp 0,d0
+ bne restore_all
+
+need_resched:
+ btst _TIF_NEED_RESCHED,(TI_flags,a2)
+ beq restore_all
+ mov (REG_EPSW,fp),d0
+ and EPSW_IM,d0
+ cmp EPSW_IM_7,d0 # interrupts off (exception path) ?
+ beq restore_all
+ call preempt_schedule_irq[],0
+ jmp need_resched
+#endif
+
+
+###############################################################################
+#
+# IRQ handler entry point
+# - intended to be entered at multiple priorities
+#
+###############################################################################
+ENTRY(irq_handler)
+ add -4,sp
+ SAVE_ALL
+
+ # it's not a syscall
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+ mov fp,d0
+ call do_IRQ[],0 # do_IRQ(regs)
+
+ jmp ret_from_intr
+
+###############################################################################
+#
+# Monitor Signal handler entry point
+#
+###############################################################################
+ENTRY(monitor_signal)
+ movbu (0xae000001),d1
+ cmp 1,d1
+ beq monsignal
+ ret [],0
+
+monsignal:
+ or EPSW_NMID,epsw
+ mov d0,a0
+ mov a0,sp
+ mov (REG_EPSW,fp),d1
+ and ~EPSW_nSL,d1
+ mov d1,(REG_EPSW,fp)
+ movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+ mov (sp),a1
+ mov a1,usp
+ movm (sp),[other]
+ add 4,sp
+here: jmp 0x8e000008-here+0x8e000008
+
+###############################################################################
+#
+# Double Fault handler entry point
+# - note that there will not be a stack, D0/A0 will hold EPSW/PC as were
+#
+###############################################################################
+ .section .bss
+ .balign THREAD_SIZE
+ .space THREAD_SIZE
+__df_stack:
+ .previous
+
+ENTRY(double_fault)
+ mov a0,(__df_stack-4) # PC as was
+ mov d0,(__df_stack-8) # EPSW as was
+ mn10300_set_dbfleds # display 'db-f' on the LEDs
+ mov 0xaa55aa55,d0
+ mov d0,(__df_stack-12) # no ORIG_D0
+ mov sp,a0 # save corrupted SP
+ mov __df_stack-12,sp # emergency supervisor stack
+ SAVE_ALL
+ mov a0,(REG_A0,fp) # save corrupted SP as A0 (which got
+ # clobbered by the CPU)
+ mov fp,d0
+ calls do_double_fault
+double_fault_loop:
+ bra double_fault_loop
+
+###############################################################################
+#
+# Bus Error handler entry point
+# - handle external (async) bus errors separately
+#
+###############################################################################
+ENTRY(raw_bus_error)
+ add -4,sp
+ mov d0,(sp)
+ mov (BCBERR),d0 # what
+ btst BCBERR_BEMR_DMA,d0 # see if it was an external bus error
+ beq __common_exception_aux # it wasn't
+
+ SAVE_ALL
+ mov (BCBEAR),d1 # destination of erroneous access
+
+ mov (REG_ORIG_D0,fp),d2
+ mov d2,(REG_D0,fp)
+ mov -1,d2
+ mov d2,(REG_ORIG_D0,fp)
+
+ add -4,sp
+ mov fp,(12,sp) # frame pointer
+ call io_bus_error[],0
+ jmp restore_all
+
+###############################################################################
+#
+# Miscellaneous exception entry points
+#
+###############################################################################
+ENTRY(nmi_handler)
+ add -4,sp
+ mov d0,(sp)
+ mov (TBR),d0
+ bra __common_exception_nonmi
+
+ENTRY(__common_exception)
+ add -4,sp
+ mov d0,(sp)
+
+__common_exception_aux:
+ mov (TBR),d0
+ and ~EPSW_NMID,epsw # turn NMIs back on if not NMI
+ or EPSW_IE,epsw
+
+__common_exception_nonmi:
+ and 0x0000FFFF,d0 # turn the exception code into a vector
+ # table index
+
+ btst 0x00000007,d0
+ bne 1f
+ cmp 0x00000400,d0
+ bge 1f
+
+ SAVE_ALL # build the stack frame
+
+ mov (REG_D0,fp),a2 # get the exception number
+ mov (REG_ORIG_D0,fp),d0
+ mov d0,(REG_D0,fp)
+ mov -1,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+#ifdef CONFIG_GDBSTUB
+ btst 0x01,(gdbstub_busy)
+ beq 2f
+ and ~EPSW_IE,epsw
+ mov fp,d0
+ mov a2,d1
+ call gdbstub_exception[],0 # gdbstub itself caused an exception
+ bra restore_all
+2:
+#endif
+
+ mov fp,d0 # arg 0: stacked register file
+ mov a2,d1 # arg 1: exception number
+ lsr 1,a2
+
+ mov (exception_table,a2),a2
+ calls (a2)
+ jmp ret_from_exception
+
+1: pi # BUG() equivalent
+
+###############################################################################
+#
+# Exception handler functions table
+#
+###############################################################################
+ .data
+ENTRY(exception_table)
+ .rept 0x400>>1
+ .long uninitialised_exception
+ .endr
+ .previous
+
+###############################################################################
+#
+# Change an entry in the exception table
+# - D0 exception code, D1 handler
+#
+###############################################################################
+ENTRY(set_excp_vector)
+ lsr 1,d0
+ add exception_table,d0
+ mov d1,(d0)
+ mov 4,d1
+#if defined(CONFIG_MN10300_CACHE_WBACK)
+ jmp mn10300_dcache_flush_inv_range2
+#else
+ ret [],0
+#endif
+
+###############################################################################
+#
+# System call table
+#
+###############################################################################
+ .data
+ENTRY(sys_call_table)
+ .long sys_restart_syscall /* 0 */
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 - old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys() */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* old sys_olduname */
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long old_select
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long old_readdir
+ .long old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* ioperm */
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_ni_syscall /* old sys_uname */
+ .long sys_ni_syscall /* 110 - iopl */
+ .long sys_vhangup
+ .long sys_ni_syscall /* old "idle" system call */
+ .long sys_ni_syscall /* vm86old */
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long sys_clone /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_ni_syscall /* modify_ldt */
+ .long sys_adjtimex
+ .long sys_mprotect /* 125 */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* reserved for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_ni_syscall /* vm86 */
+ .long sys_ni_syscall /* Old sys_query_module */
+ .long sys_poll
+ .long sys_nfsservctl
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_chown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* reserved for streams1 */
+ .long sys_ni_syscall /* reserved for streams2 */
+ .long sys_vfork /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ .long sys_getdents64 /* 220 */
+ .long sys_fcntl64
+ .long sys_ni_syscall /* reserved for TUX */
+ .long sys_ni_syscall
+ .long sys_gettid
+ .long sys_readahead /* 225 */
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr /* 230 */
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr /* 235 */
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex /* 240 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_ni_syscall /* sys_set_thread_area */
+ .long sys_ni_syscall /* sys_get_thread_area */
+ .long sys_io_setup /* 245 */
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64 /* 250 */
+ .long sys_ni_syscall
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 255 */
+ .long sys_epoll_wait
+ .long sys_remap_file_pages
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 260 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 265 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 270 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_ni_syscall /* sys_vserver */
+ .long sys_mbind
+ .long sys_get_mempolicy /* 275 */
+ .long sys_set_mempolicy
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive /* 280 */
+ .long sys_mq_notify
+ .long sys_mq_getsetattr
+ .long sys_kexec_load
+ .long sys_waitid
+ .long sys_ni_syscall /* 285 */ /* available */
+ .long sys_add_key
+ .long sys_request_key
+ .long sys_keyctl
+ .long sys_cacheflush
+ .long sys_ioprio_set /* 290 */
+ .long sys_ioprio_get
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
+ .long sys_migrate_pages /* 295 */
+ .long sys_openat
+ .long sys_mkdirat
+ .long sys_mknodat
+ .long sys_fchownat
+ .long sys_futimesat /* 300 */
+ .long sys_fstatat64
+ .long sys_unlinkat
+ .long sys_renameat
+ .long sys_linkat
+ .long sys_symlinkat /* 305 */
+ .long sys_readlinkat
+ .long sys_fchmodat
+ .long sys_faccessat
+ .long sys_pselect6
+ .long sys_ppoll /* 310 */
+ .long sys_unshare
+ .long sys_set_robust_list
+ .long sys_get_robust_list
+ .long sys_splice
+ .long sys_sync_file_range /* 315 */
+ .long sys_tee
+ .long sys_vmsplice
+ .long sys_move_pages
+ .long sys_getcpu
+ .long sys_epoll_pwait /* 320 */
+ .long sys_utimensat
+ .long sys_signalfd
+ .long sys_timerfd_create
+ .long sys_eventfd
+ .long sys_fallocate /* 325 */
+ .long sys_timerfd_settime
+ .long sys_timerfd_gettime
+
+
+nr_syscalls=(.-sys_call_table)/4
--- /dev/null
+/* MN10300 Low level FPU management operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cpu-regs.h>
+
+###############################################################################
+#
+# void fpu_init_state(void)
+# - initialise the FPU
+#
+###############################################################################
+ .globl fpu_init_state
+ .type fpu_init_state,@function
+fpu_init_state:
+ mov epsw,d0
+ or EPSW_FE,epsw
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+ nop
+#endif
+ fmov 0,fs0
+ fmov fs0,fs1
+ fmov fs0,fs2
+ fmov fs0,fs3
+ fmov fs0,fs4
+ fmov fs0,fs5
+ fmov fs0,fs6
+ fmov fs0,fs7
+ fmov fs0,fs8
+ fmov fs0,fs9
+ fmov fs0,fs10
+ fmov fs0,fs11
+ fmov fs0,fs12
+ fmov fs0,fs13
+ fmov fs0,fs14
+ fmov fs0,fs15
+ fmov fs0,fs16
+ fmov fs0,fs17
+ fmov fs0,fs18
+ fmov fs0,fs19
+ fmov fs0,fs20
+ fmov fs0,fs21
+ fmov fs0,fs22
+ fmov fs0,fs23
+ fmov fs0,fs24
+ fmov fs0,fs25
+ fmov fs0,fs26
+ fmov fs0,fs27
+ fmov fs0,fs28
+ fmov fs0,fs29
+ fmov fs0,fs30
+ fmov fs0,fs31
+ fmov FPCR_INIT,fpcr
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+ nop
+#endif
+ mov d0,epsw
+ ret [],0
+
+ .size fpu_init_state,.-fpu_init_state
+
+###############################################################################
+#
+# void fpu_save(struct fpu_state_struct *)
+# - save the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+ .globl fpu_save
+ .type fpu_save,@function
+fpu_save:
+ mov epsw,d1
+ or EPSW_FE,epsw /* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+#endif
+ mov d0,a0
+ fmov fs0,(a0+)
+ fmov fs1,(a0+)
+ fmov fs2,(a0+)
+ fmov fs3,(a0+)
+ fmov fs4,(a0+)
+ fmov fs5,(a0+)
+ fmov fs6,(a0+)
+ fmov fs7,(a0+)
+ fmov fs8,(a0+)
+ fmov fs9,(a0+)
+ fmov fs10,(a0+)
+ fmov fs11,(a0+)
+ fmov fs12,(a0+)
+ fmov fs13,(a0+)
+ fmov fs14,(a0+)
+ fmov fs15,(a0+)
+ fmov fs16,(a0+)
+ fmov fs17,(a0+)
+ fmov fs18,(a0+)
+ fmov fs19,(a0+)
+ fmov fs20,(a0+)
+ fmov fs21,(a0+)
+ fmov fs22,(a0+)
+ fmov fs23,(a0+)
+ fmov fs24,(a0+)
+ fmov fs25,(a0+)
+ fmov fs26,(a0+)
+ fmov fs27,(a0+)
+ fmov fs28,(a0+)
+ fmov fs29,(a0+)
+ fmov fs30,(a0+)
+ fmov fs31,(a0+)
+ fmov fpcr,d0
+ mov d0,(a0)
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+#endif
+
+ mov d1,epsw
+ ret [],0
+
+ .size fpu_save,.-fpu_save
+
+###############################################################################
+#
+# void fpu_restore(struct fpu_state_struct *)
+# - restore the fpu state
+# - note that an FPU Operational exception might occur during this process
+#
+###############################################################################
+ .globl fpu_restore
+ .type fpu_restore,@function
+fpu_restore:
+ mov epsw,d1
+ or EPSW_FE,epsw /* enable the FPU so we can access it */
+
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+#endif
+ mov d0,a0
+ fmov (a0+),fs0
+ fmov (a0+),fs1
+ fmov (a0+),fs2
+ fmov (a0+),fs3
+ fmov (a0+),fs4
+ fmov (a0+),fs5
+ fmov (a0+),fs6
+ fmov (a0+),fs7
+ fmov (a0+),fs8
+ fmov (a0+),fs9
+ fmov (a0+),fs10
+ fmov (a0+),fs11
+ fmov (a0+),fs12
+ fmov (a0+),fs13
+ fmov (a0+),fs14
+ fmov (a0+),fs15
+ fmov (a0+),fs16
+ fmov (a0+),fs17
+ fmov (a0+),fs18
+ fmov (a0+),fs19
+ fmov (a0+),fs20
+ fmov (a0+),fs21
+ fmov (a0+),fs22
+ fmov (a0+),fs23
+ fmov (a0+),fs24
+ fmov (a0+),fs25
+ fmov (a0+),fs26
+ fmov (a0+),fs27
+ fmov (a0+),fs28
+ fmov (a0+),fs29
+ fmov (a0+),fs30
+ fmov (a0+),fs31
+ mov (a0),d0
+ fmov d0,fpcr
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ nop
+ nop
+ nop
+#endif
+
+ mov d1,epsw
+ ret [],0
+
+ .size fpu_restore,.-fpu_restore
--- /dev/null
+/* MN10300 FPU management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/uaccess.h>
+#include <asm/fpu.h>
+#include <asm/elf.h>
+#include <asm/exceptions.h>
+
+struct task_struct *fpu_state_owner;
+
+/*
+ * handle an exception due to the FPU being disabled
+ */
+asmlinkage void fpu_disabled(struct pt_regs *regs, enum exception_code code)
+{
+ struct task_struct *tsk = current;
+
+ if (!user_mode(regs))
+ die_if_no_fixup("An FPU Disabled exception happened in"
+ " kernel space\n",
+ regs, code);
+
+#ifdef CONFIG_FPU
+ preempt_disable();
+
+ /* transfer the last process's FPU state to memory */
+ if (fpu_state_owner) {
+ fpu_save(&fpu_state_owner->thread.fpu_state);
+ fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+ }
+
+ /* the current process now owns the FPU state */
+ fpu_state_owner = tsk;
+ regs->epsw |= EPSW_FE;
+
+ /* load the FPU with the current process's FPU state or invent a new
+ * clean one if the process doesn't have one */
+ if (is_using_fpu(tsk)) {
+ fpu_restore(&tsk->thread.fpu_state);
+ } else {
+ fpu_init_state();
+ set_using_fpu(tsk);
+ }
+
+ preempt_enable();
+#else
+ {
+ siginfo_t info;
+
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_addr = (void *) tsk->thread.uregs->pc;
+ info.si_code = FPE_FLTINV;
+
+ force_sig_info(SIGFPE, &info, tsk);
+ }
+#endif /* CONFIG_FPU */
+}
+
+/*
+ * handle an FPU operational exception
+ * - there's a possibility that if the FPU is asynchronous, the signal might
+ * be meant for a process other than the current one
+ */
+asmlinkage void fpu_exception(struct pt_regs *regs, enum exception_code code)
+{
+ struct task_struct *tsk = fpu_state_owner;
+ siginfo_t info;
+
+ if (!user_mode(regs))
+ die_if_no_fixup("An FPU Operation exception happened in"
+ " kernel space\n",
+ regs, code);
+
+ if (!tsk)
+ die_if_no_fixup("An FPU Operation exception happened,"
+ " but the FPU is not in use",
+ regs, code);
+
+ info.si_signo = SIGFPE;
+ info.si_errno = 0;
+ info.si_addr = (void *) tsk->thread.uregs->pc;
+ info.si_code = FPE_FLTINV;
+
+#ifdef CONFIG_FPU
+ {
+ u32 fpcr;
+
+ /* get FPCR (we need to enable the FPU whilst we do this) */
+ asm volatile(" or %1,epsw \n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ " nop \n"
+ " nop \n"
+ " nop \n"
+#endif
+ " fmov fpcr,%0 \n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ " nop \n"
+ " nop \n"
+ " nop \n"
+#endif
+ " and %2,epsw \n"
+ : "=&d"(fpcr)
+ : "i"(EPSW_FE), "i"(~EPSW_FE)
+ );
+
+ if (fpcr & FPCR_EC_Z)
+ info.si_code = FPE_FLTDIV;
+ else if (fpcr & FPCR_EC_O)
+ info.si_code = FPE_FLTOVF;
+ else if (fpcr & FPCR_EC_U)
+ info.si_code = FPE_FLTUND;
+ else if (fpcr & FPCR_EC_I)
+ info.si_code = FPE_FLTRES;
+ }
+#endif
+
+ force_sig_info(SIGFPE, &info, tsk);
+}
+
+/*
+ * save the FPU state to a signal context
+ */
+int fpu_setup_sigcontext(struct fpucontext *fpucontext)
+{
+#ifdef CONFIG_FPU
+ struct task_struct *tsk = current;
+
+ if (!is_using_fpu(tsk))
+ return 0;
+
+ /* transfer the current FPU state to memory and cause fpu_init() to be
+ * triggered by the next attempted FPU operation by the current
+ * process.
+ */
+ preempt_disable();
+
+ if (fpu_state_owner == tsk) {
+ fpu_save(&tsk->thread.fpu_state);
+ fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+ fpu_state_owner = NULL;
+ }
+
+ preempt_enable();
+
+ /* we no longer have a valid current FPU state */
+ clear_using_fpu(tsk);
+
+ /* transfer the saved FPU state onto the userspace stack */
+ if (copy_to_user(fpucontext,
+ &tsk->thread.fpu_state,
+ min(sizeof(struct fpu_state_struct),
+ sizeof(struct fpucontext))))
+ return -1;
+
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+/*
+ * kill a process's FPU state during restoration after signal handling
+ */
+void fpu_kill_state(struct task_struct *tsk)
+{
+#ifdef CONFIG_FPU
+ /* disown anything left in the FPU */
+ preempt_disable();
+
+ if (fpu_state_owner == tsk) {
+ fpu_state_owner->thread.uregs->epsw &= ~EPSW_FE;
+ fpu_state_owner = NULL;
+ }
+
+ preempt_enable();
+#endif
+ /* we no longer have a valid current FPU state */
+ clear_using_fpu(tsk);
+}
+
+/*
+ * restore the FPU state from a signal context
+ */
+int fpu_restore_sigcontext(struct fpucontext *fpucontext)
+{
+ struct task_struct *tsk = current;
+ int ret;
+
+ /* load up the old FPU state */
+ ret = copy_from_user(&tsk->thread.fpu_state,
+ fpucontext,
+ min(sizeof(struct fpu_state_struct),
+ sizeof(struct fpucontext)));
+ if (!ret)
+ set_using_fpu(tsk);
+
+ return ret;
+}
+
+/*
+ * fill in the FPU structure for a core dump
+ */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpreg)
+{
+ struct task_struct *tsk = current;
+ int fpvalid;
+
+ fpvalid = is_using_fpu(tsk);
+ if (fpvalid) {
+ unlazy_fpu(tsk);
+ memcpy(fpreg, &tsk->thread.fpu_state, sizeof(*fpreg));
+ }
+
+ return fpvalid;
+}
--- /dev/null
+###############################################################################
+#
+# MN10300 Low-level cache purging routines for gdbstub
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cache.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#include <asm/frame.inc>
+#include <asm/serial-regs.h>
+
+ .text
+
+###############################################################################
+#
+# GDB stub cache purge
+#
+###############################################################################
+ .type gdbstub_purge_cache,@function
+ENTRY(gdbstub_purge_cache)
+ #######################################################################
+ # read the addresses tagged in the cache's tag RAM and attempt to flush
+ # those addresses specifically
+ # - we rely on the hardware to filter out invalid tag entry addresses
+ mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_loop:
+ mov (a0),d0
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
+ # cache
+ mov d0,(a1) # conditional purge
+
+mn10300_dcache_flush_skip:
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_loop
+
+;; # unconditionally flush and invalidate the dcache
+;; mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+;; mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of
+;; # entries
+;;
+;; gdbstub_purge_cache__dcache_loop:
+;; mov (a1),d0 # unconditional purge
+;;
+;; add L1_CACHE_BYTES,a1
+;; add -1,d1
+;; bne gdbstub_purge_cache__dcache_loop
+
+ #######################################################################
+ # now invalidate the icache
+ mov CHCTR,a0
+ movhu (a0),a1
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the icache
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_ICINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ movhu a1,(a0)
+ movhu (a0),d0 # read back to flush
+ # (SIGILLs all over without this)
+
+ mov d1,epsw
+
+ ret [],0
+
+ .size gdbstub_purge_cache,.-gdbstub_purge_cache
--- /dev/null
+###############################################################################
+#
+# 16550 serial Rx interrupt handler for gdbstub I/O
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cpu-regs.h>
+#include <asm/thread_info.h>
+#include <asm/frame.inc>
+#include <asm/intctl-regs.h>
+#include <asm/unit/serial.h>
+
+ .text
+
+###############################################################################
+#
+# GDB stub serial receive interrupt entry point
+# - intended to run at interrupt priority 0
+#
+###############################################################################
+ .globl gdbstub_io_rx_handler
+ .type gdbstub_io_rx_handler,@function
+gdbstub_io_rx_handler:
+ movm [d2,d3,a2,a3],(sp)
+
+#if 1
+ movbu (GDBPORT_SERIAL_IIR),d2
+#endif
+
+ mov (gdbstub_rx_inp),a3
+gdbstub_io_rx_more:
+ mov a3,a2
+ add 2,a3
+ and 0x00000fff,a3
+ mov (gdbstub_rx_outp),d3
+ cmp a3,d3
+ beq gdbstub_io_rx_overflow
+
+ movbu (GDBPORT_SERIAL_LSR),d3
+ btst UART_LSR_DR,d3
+ beq gdbstub_io_rx_done
+ movbu (GDBPORT_SERIAL_RX),d2
+ movbu d3,(gdbstub_rx_buffer+1,a2)
+ movbu d2,(gdbstub_rx_buffer,a2)
+ mov a3,(gdbstub_rx_inp)
+ bra gdbstub_io_rx_more
+
+gdbstub_io_rx_done:
+ mov GxICR_DETECT,d2
+ movbu d2,(XIRQxICR(GDBPORT_SERIAL_IRQ)) # ACK the interrupt
+ movhu (XIRQxICR(GDBPORT_SERIAL_IRQ)),d2 # flush
+ movm (sp),[d2,d3,a2,a3]
+ bset 0x01,(gdbstub_busy)
+ beq gdbstub_io_rx_enter
+ rti
+
+gdbstub_io_rx_overflow:
+ bset 0x01,(gdbstub_rx_overflow)
+ bra gdbstub_io_rx_done
+
+gdbstub_io_rx_enter:
+ or EPSW_IE|EPSW_IM_1,epsw
+ add -4,sp
+ SAVE_ALL
+
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+ mov 0x280,d1
+
+ mov fp,d0
+ call gdbstub_rx_irq[],0 # gdbstub_rx_irq(regs,excep)
+
+ and ~EPSW_IE,epsw
+ bclr 0x01,(gdbstub_busy)
+
+ .globl gdbstub_return
+gdbstub_return:
+ RESTORE_ALL
+
+ .size gdbstub_io_rx_handler,.-gdbstub_io_rx_handler
--- /dev/null
+/* 16550 serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/nmi.h>
+
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/serial-regs.h>
+#include <asm/unit/serial.h>
+
+/*
+ * initialise the GDB stub
+ */
+void gdbstub_io_init(void)
+{
+ u16 tmp;
+
+ /* set up the serial port */
+ GDBPORT_SERIAL_LCR = UART_LCR_WLEN8; /* 1N8 */
+ GDBPORT_SERIAL_FCR = (UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+
+ FLOWCTL_CLEAR(DTR);
+ FLOWCTL_SET(RTS);
+
+ gdbstub_io_set_baud(115200);
+
+ /* we want to get serial receive interrupts */
+ XIRQxICR(GDBPORT_SERIAL_IRQ) = 0;
+ tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+ IVAR0 = EXCEP_IRQ_LEVEL0;
+ set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
+
+ XIRQxICR(GDBPORT_SERIAL_IRQ) &= ~GxICR_REQUEST;
+ XIRQxICR(GDBPORT_SERIAL_IRQ) = GxICR_ENABLE | GxICR_LEVEL_0;
+ tmp = XIRQxICR(GDBPORT_SERIAL_IRQ);
+
+ GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
+
+ /* permit level 0 IRQs to take place */
+ asm volatile(
+ " and %0,epsw \n"
+ " or %1,epsw \n"
+ :
+ : "i"(~EPSW_IM), "i"(EPSW_IE | EPSW_IM_1)
+ );
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+ unsigned value;
+ u8 lcr;
+
+ value = 18432000 / 16 / baud;
+
+ lcr = GDBPORT_SERIAL_LCR;
+ GDBPORT_SERIAL_LCR |= UART_LCR_DLAB;
+ GDBPORT_SERIAL_DLL = value & 0xff;
+ GDBPORT_SERIAL_DLM = (value >> 8) & 0xff;
+ GDBPORT_SERIAL_LCR = lcr;
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+ unsigned ix;
+ u8 ch, st;
+
+ *_ch = 0xff;
+
+ if (gdbstub_rx_unget) {
+ *_ch = gdbstub_rx_unget;
+ gdbstub_rx_unget = 0;
+ return 0;
+ }
+
+ try_again:
+ /* pull chars out of the buffer */
+ ix = gdbstub_rx_outp;
+ if (ix == gdbstub_rx_inp) {
+ if (nonblock)
+ return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+ watchdog_alert_counter = 0;
+#endif /* CONFIG_MN10300_WD_TIMER */
+ goto try_again;
+ }
+
+ ch = gdbstub_rx_buffer[ix++];
+ st = gdbstub_rx_buffer[ix++];
+ gdbstub_rx_outp = ix & 0x00000fff;
+
+ if (st & UART_LSR_BI) {
+ gdbstub_proto("### GDB Rx Break Detected ###\n");
+ return -EINTR;
+ } else if (st & (UART_LSR_FE | UART_LSR_OE | UART_LSR_PE)) {
+ gdbstub_proto("### GDB Rx Error (st=%02x) ###\n", st);
+ return -EIO;
+ } else {
+ gdbstub_proto("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+ *_ch = ch & 0x7f;
+ return 0;
+ }
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+ FLOWCTL_SET(DTR);
+ LSR_WAIT_FOR(THRE);
+ /* FLOWCTL_WAIT_FOR(CTS); */
+
+ if (ch == 0x0a) {
+ GDBPORT_SERIAL_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ /* FLOWCTL_WAIT_FOR(CTS); */
+ }
+ GDBPORT_SERIAL_TX = ch;
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_flush(void)
+{
+ LSR_WAIT_FOR(TEMT);
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_CLEAR(DTR);
+}
--- /dev/null
+###############################################################################
+#
+# MN10300 On-chip serial Rx interrupt handler for GDB stub I/O
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/thread_info.h>
+#include <asm/cpu-regs.h>
+#include <asm/frame.inc>
+#include <asm/intctl-regs.h>
+#include <asm/unit/serial.h>
+#include "mn10300-serial.h"
+
+ .text
+
+###############################################################################
+#
+# GDB stub serial receive interrupt entry point
+# - intended to run at interrupt priority 0
+#
+###############################################################################
+ .globl gdbstub_io_rx_handler
+ .type gdbstub_io_rx_handler,@function
+gdbstub_io_rx_handler:
+ movm [d2,d3,a2,a3],(sp)
+
+ mov (gdbstub_rx_inp),a3
+gdbstub_io_rx_more:
+ mov a3,a2
+ add 2,a3
+ and PAGE_SIZE_asm-1,a3
+ mov (gdbstub_rx_outp),d3
+ cmp a3,d3
+ beq gdbstub_io_rx_overflow
+
+ movbu (SCgSTR),d3
+ btst SC01STR_RBF,d3
+ beq gdbstub_io_rx_done
+ movbu (SCgRXB),d2
+ movbu d3,(gdbstub_rx_buffer+1,a2)
+ movbu d2,(gdbstub_rx_buffer,a2)
+ mov a3,(gdbstub_rx_inp)
+ bra gdbstub_io_rx_more
+
+gdbstub_io_rx_done:
+ mov GxICR_DETECT,d2
+ movbu d2,(GxICR(SCgRXIRQ)) # ACK the interrupt
+ movhu (GxICR(SCgRXIRQ)),d2 # flush
+
+ movm (sp),[d2,d3,a2,a3]
+ bset 0x01,(gdbstub_busy)
+ beq gdbstub_io_rx_enter
+ rti
+
+gdbstub_io_rx_overflow:
+ bset 0x01,(gdbstub_rx_overflow)
+ bra gdbstub_io_rx_done
+
+###############################################################################
+#
+# debugging interrupt - enter the GDB stub proper
+#
+###############################################################################
+gdbstub_io_rx_enter:
+ or EPSW_IE|EPSW_IM_1,epsw
+ add -4,sp
+ SAVE_ALL
+
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+ mov 0x280,d1
+
+ mov fp,d0
+ call gdbstub_rx_irq[],0 # gdbstub_io_rx_irq(regs,excep)
+
+ and ~EPSW_IE,epsw
+ bclr 0x01,(gdbstub_busy)
+
+ .globl gdbstub_return
+gdbstub_return:
+ RESTORE_ALL
+
+ .size gdbstub_io_rx_handler,.-gdbstub_io_rx_handler
--- /dev/null
+/* MN10300 On-chip serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/unit/clock.h>
+#include "mn10300-serial.h"
+
+#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif0;
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif1;
+#else
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif2;
+#endif
+
+
+/*
+ * initialise the GDB stub I/O routines
+ */
+void __init gdbstub_io_init(void)
+{
+ uint16_t scxctr;
+ int tmp;
+
+ switch (gdbstub_port->clock_src) {
+ case MNSCx_CLOCK_SRC_IOCLK:
+ gdbstub_port->ioclk = MN10300_IOCLK;
+ break;
+
+#ifdef MN10300_IOBCLK
+ case MNSCx_CLOCK_SRC_IOBCLK:
+ gdbstub_port->ioclk = MN10300_IOBCLK;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ /* set up the serial port */
+ gdbstub_io_set_baud(115200);
+
+ /* we want to get serial receive interrupts */
+ set_intr_level(gdbstub_port->rx_irq, GxICR_LEVEL_0);
+ set_intr_level(gdbstub_port->tx_irq, GxICR_LEVEL_0);
+ set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
+
+ *gdbstub_port->rx_icr |= GxICR_ENABLE;
+ tmp = *gdbstub_port->rx_icr;
+
+ /* enable the device */
+ scxctr = SC01CTR_CLN_8BIT; /* 1N8 */
+ switch (gdbstub_port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ scxctr |= SC0CTR_CK_TM8UFLOW_8; /* == SC1CTR_CK_TM9UFLOW_8
+ == SC2CTR_CK_TM10UFLOW_8 */
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ scxctr |= SC0CTR_CK_TM2UFLOW_8;
+ break;
+ }
+
+ scxctr |= SC01CTR_TXE | SC01CTR_RXE;
+
+ *gdbstub_port->_control = scxctr;
+ tmp = *gdbstub_port->_control;
+
+ /* permit level 0 IRQs only */
+ asm volatile(
+ " and %0,epsw \n"
+ " or %1,epsw \n"
+ :
+ : "i"(~EPSW_IM), "i"(EPSW_IE|EPSW_IM_1)
+ );
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+ const unsigned bits = 10; /* 1 [start] + 8 [data] + 0 [parity] +
+ * 1 [stop] */
+ unsigned long ioclk = gdbstub_port->ioclk;
+ unsigned xdiv, tmp;
+ uint16_t tmxbr;
+ uint8_t tmxmd;
+
+ if (!baud) {
+ baud = 9600;
+ } else if (baud == 134) {
+ baud = 269; /* 134 is really 134.5 */
+ xdiv = 2;
+ }
+
+try_alternative:
+ xdiv = 1;
+
+ switch (gdbstub_port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ tmxmd = TM8MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ tmxmd = TM8MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ tmxmd = TM2MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ tmxmd = TM2MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+ break;
+ }
+
+ /* as a last resort, if the quotient is zero, default to 9600 bps */
+ baud = 9600;
+ goto try_alternative;
+
+timer_okay:
+ gdbstub_port->uart.timeout = (2 * bits * HZ) / baud;
+ gdbstub_port->uart.timeout += HZ / 50;
+
+ /* set the timer to produce the required baud rate */
+ switch (gdbstub_port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ *gdbstub_port->_tmxmd = 0;
+ *gdbstub_port->_tmxbr = tmxbr;
+ *gdbstub_port->_tmxmd = TM8MD_INIT_COUNTER;
+ *gdbstub_port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ *gdbstub_port->_tmxmd = 0;
+ *(volatile u8 *) gdbstub_port->_tmxbr = (u8)tmxbr;
+ *gdbstub_port->_tmxmd = TM2MD_INIT_COUNTER;
+ *gdbstub_port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+ break;
+ }
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+ unsigned ix;
+ u8 ch, st;
+
+ *_ch = 0xff;
+
+ if (gdbstub_rx_unget) {
+ *_ch = gdbstub_rx_unget;
+ gdbstub_rx_unget = 0;
+ return 0;
+ }
+
+try_again:
+ /* pull chars out of the buffer */
+ ix = gdbstub_rx_outp;
+ if (ix == gdbstub_rx_inp) {
+ if (nonblock)
+ return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+ watchdog_alert_counter = 0;
+#endif /* CONFIG_MN10300_WD_TIMER */
+ goto try_again;
+ }
+
+ ch = gdbstub_rx_buffer[ix++];
+ st = gdbstub_rx_buffer[ix++];
+ gdbstub_rx_outp = ix & (PAGE_SIZE - 1);
+
+ st &= SC01STR_RXF | SC01STR_RBF | SC01STR_FEF | SC01STR_PEF |
+ SC01STR_OEF;
+
+ /* deal with what we've got
+ * - note that the UART doesn't do BREAK-detection for us
+ */
+ if (st & SC01STR_FEF && ch == 0) {
+ switch (gdbstub_port->rx_brk) {
+ case 0: gdbstub_port->rx_brk = 1; goto try_again;
+ case 1: gdbstub_port->rx_brk = 2; goto try_again;
+ case 2:
+ gdbstub_port->rx_brk = 3;
+ gdbstub_proto("### GDB MNSERIAL Rx Break Detected"
+ " ###\n");
+ return -EINTR;
+ default:
+ goto try_again;
+ }
+ } else if (st & SC01STR_FEF) {
+ if (gdbstub_port->rx_brk)
+ goto try_again;
+
+ gdbstub_proto("### GDB MNSERIAL Framing Error ###\n");
+ return -EIO;
+ } else if (st & SC01STR_OEF) {
+ if (gdbstub_port->rx_brk)
+ goto try_again;
+
+ gdbstub_proto("### GDB MNSERIAL Overrun Error ###\n");
+ return -EIO;
+ } else if (st & SC01STR_PEF) {
+ if (gdbstub_port->rx_brk)
+ goto try_again;
+
+ gdbstub_proto("### GDB MNSERIAL Parity Error ###\n");
+ return -EIO;
+ } else {
+ /* look for the tail-end char on a break run */
+ if (gdbstub_port->rx_brk == 3) {
+ switch (ch) {
+ case 0xFF:
+ case 0xFE:
+ case 0xFC:
+ case 0xF8:
+ case 0xF0:
+ case 0xE0:
+ case 0xC0:
+ case 0x80:
+ case 0x00:
+ gdbstub_port->rx_brk = 0;
+ goto try_again;
+ default:
+ break;
+ }
+ }
+
+ gdbstub_port->rx_brk = 0;
+ gdbstub_io("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+ *_ch = ch & 0x7f;
+ return 0;
+ }
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+ while (*gdbstub_port->_status & SC01STR_TBF)
+ continue;
+
+ if (ch == 0x0a) {
+ *(u8 *) gdbstub_port->_txb = 0x0d;
+ while (*gdbstub_port->_status & SC01STR_TBF)
+ continue;
+ }
+
+ *(u8 *) gdbstub_port->_txb = ch;
+}
+
+/*
+ * flush the transmission buffers
+ */
+void gdbstub_io_tx_flush(void)
+{
+ while (*gdbstub_port->_status & (SC01STR_TBF | SC01STR_TXF))
+ continue;
+}
--- /dev/null
+###############################################################################
+#
+# MN10300 Low-level gdbstub routines
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/cache.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+#include <asm/frame.inc>
+#include <asm/serial-regs.h>
+
+ .text
+
+###############################################################################
+#
+# GDB stub read memory with guard
+# - D0 holds the memory address to read
+# - D1 holds the address to store the byte into
+#
+###############################################################################
+ .globl gdbstub_read_byte_guard
+ .globl gdbstub_read_byte_cont
+ENTRY(gdbstub_read_byte)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_read_byte_guard:
+ movbu (a0),d1
+gdbstub_read_byte_cont:
+ movbu d1,(a1)
+ ret [],0
+
+ .globl gdbstub_read_word_guard
+ .globl gdbstub_read_word_cont
+ENTRY(gdbstub_read_word)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_read_word_guard:
+ movhu (a0),d1
+gdbstub_read_word_cont:
+ movhu d1,(a1)
+ ret [],0
+
+ .globl gdbstub_read_dword_guard
+ .globl gdbstub_read_dword_cont
+ENTRY(gdbstub_read_dword)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_read_dword_guard:
+ mov (a0),d1
+gdbstub_read_dword_cont:
+ mov d1,(a1)
+ ret [],0
+
+###############################################################################
+#
+# GDB stub write memory with guard
+# - D0 holds the byte to store
+# - D1 holds the memory address to write
+#
+###############################################################################
+ .globl gdbstub_write_byte_guard
+ .globl gdbstub_write_byte_cont
+ENTRY(gdbstub_write_byte)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_write_byte_guard:
+ movbu a0,(a1)
+gdbstub_write_byte_cont:
+ ret [],0
+
+ .globl gdbstub_write_word_guard
+ .globl gdbstub_write_word_cont
+ENTRY(gdbstub_write_word)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_write_word_guard:
+ movhu a0,(a1)
+gdbstub_write_word_cont:
+ ret [],0
+
+ .globl gdbstub_write_dword_guard
+ .globl gdbstub_write_dword_cont
+ENTRY(gdbstub_write_dword)
+ mov d0,a0
+ mov d1,a1
+ clr d0
+gdbstub_write_dword_guard:
+ mov a0,(a1)
+gdbstub_write_dword_cont:
+ ret [],0
+
+###############################################################################
+#
+# GDB stub BUG() trap
+#
+###############################################################################
+ENTRY(__gdbstub_bug_trap)
+ .byte 0xF7,0xF7 # don't use 0xFF as the JTAG unit preempts that
+ ret [],0
--- /dev/null
+/* MN10300 GDB stub
+ *
+ * Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ * Contributed by HP Systems
+ *
+ * Modified for SPARC by Stu Grossman, Cygnus Support.
+ *
+ * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ * Copyright (C) 1995 Andreas Busse
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified for Linux/mn10300 by David Howells <dhowells@redhat.com>
+ */
+
+/*
+ * To enable debugger support, two things need to happen. One, a
+ * call to set_debug_traps() is necessary in order to allow any breakpoints
+ * or error conditions to be properly intercepted and reported to gdb.
+ * Two, a breakpoint needs to be generated to begin communication. This
+ * is most easily accomplished by a call to breakpoint(). Breakpoint()
+ * simulates a breakpoint by executing a BREAK instruction.
+ *
+ *
+ * The following gdb commands are supported:
+ *
+ * command function Return value
+ *
+ * g return the value of the CPU registers hex data or ENN
+ * G set the value of the CPU registers OK or ENN
+ *
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
+ *
+ * c Resume at current address SNN ( signal NN)
+ * cAA..AA Continue at address AA..AA SNN
+ *
+ * s Step one instruction SNN
+ * sAA..AA Step one instruction from AA..AA SNN
+ *
+ * k kill
+ *
+ * ? What was the last sigval ? SNN (signal NN)
+ *
+ * bBB..BB Set baud rate to BB..BB OK or BNN, then sets
+ * baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum. A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer. '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host: Reply:
+ * $m0,10#2a +$00010203040506070809101112131415#42
+ *
+ *
+ * ==============
+ * MORE EXAMPLES:
+ * ==============
+ *
+ * For reference -- the following are the steps that one
+ * company took (RidgeRun Inc) to get remote gdb debugging
+ * going. In this scenario the host machine was a PC and the
+ * target platform was a Galileo EVB64120A MIPS evaluation
+ * board.
+ *
+ * Step 1:
+ * First download gdb-5.0.tar.gz from the internet.
+ * and then build/install the package.
+ *
+ * Example:
+ * $ tar zxf gdb-5.0.tar.gz
+ * $ cd gdb-5.0
+ * $ ./configure --target=am33_2.0-linux-gnu
+ * $ make
+ * $ install
+ * am33_2.0-linux-gnu-gdb
+ *
+ * Step 2:
+ * Configure linux for remote debugging and build it.
+ *
+ * Example:
+ * $ cd ~/linux
+ * $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
+ * $ make dep; make vmlinux
+ *
+ * Step 3:
+ * Download the kernel to the remote target and start
+ * the kernel running. It will promptly halt and wait
+ * for the host gdb session to connect. It does this
+ * since the "Kernel Hacking" option has defined
+ * CONFIG_REMOTE_DEBUG which in turn enables your calls
+ * to:
+ * set_debug_traps();
+ * breakpoint();
+ *
+ * Step 4:
+ * Start the gdb session on the host.
+ *
+ * Example:
+ * $ am33_2.0-linux-gnu-gdb vmlinux
+ * (gdb) set remotebaud 115200
+ * (gdb) target remote /dev/ttyS1
+ * ...at this point you are connected to
+ * the remote target and can use gdb
+ * in the normal fasion. Setting
+ * breakpoints, single stepping,
+ * printing variables, etc.
+ *
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/bug.h>
+
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/cacheflush.h>
+#include <asm/serial-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/unit/serial.h>
+
+/* define to use F7F7 rather than FF which is subverted by JTAG debugger */
+#undef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers
+ * at least NUMREGBYTES*2 are needed for register packets
+ */
+#define BUFMAX 2048
+
+static const char gdbstub_banner[] =
+ "Linux/MN10300 GDB Stub (c) RedHat 2007\n";
+
+u8 gdbstub_rx_buffer[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+u32 gdbstub_rx_inp;
+u32 gdbstub_rx_outp;
+u8 gdbstub_busy;
+u8 gdbstub_rx_overflow;
+u8 gdbstub_rx_unget;
+
+static u8 gdbstub_flush_caches;
+static char input_buffer[BUFMAX];
+static char output_buffer[BUFMAX];
+static char trans_buffer[BUFMAX];
+
+static const char hexchars[] = "0123456789abcdef";
+
+struct gdbstub_bkpt {
+ u8 *addr; /* address of breakpoint */
+ u8 len; /* size of breakpoint */
+ u8 origbytes[7]; /* original bytes */
+};
+
+static struct gdbstub_bkpt gdbstub_bkpts[256];
+
+/*
+ * local prototypes
+ */
+static void getpacket(char *buffer);
+static int putpacket(char *buffer);
+static int computeSignal(enum exception_code excep);
+static int hex(unsigned char ch);
+static int hexToInt(char **ptr, int *intValue);
+static unsigned char *mem2hex(const void *mem, char *buf, int count,
+ int may_fault);
+static const char *hex2mem(const char *buf, void *_mem, int count,
+ int may_fault);
+
+/*
+ * Convert ch from a hex digit to an int
+ */
+static int hex(unsigned char ch)
+{
+ if (ch >= 'a' && ch <= 'f')
+ return ch - 'a' + 10;
+ if (ch >= '0' && ch <= '9')
+ return ch - '0';
+ if (ch >= 'A' && ch <= 'F')
+ return ch - 'A' + 10;
+ return -1;
+}
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+
+void debug_to_serial(const char *p, int n)
+{
+ __debug_to_serial(p, n);
+ /* gdbstub_console_write(NULL, p, n); */
+}
+
+void gdbstub_printk(const char *fmt, ...)
+{
+ va_list args;
+ int len;
+
+ /* Emit the output into the temporary buffer */
+ va_start(args, fmt);
+ len = vsnprintf(trans_buffer, sizeof(trans_buffer), fmt, args);
+ va_end(args);
+ debug_to_serial(trans_buffer, len);
+}
+
+#endif
+
+static inline char *gdbstub_strcpy(char *dst, const char *src)
+{
+ int loop = 0;
+ while ((dst[loop] = src[loop]))
+ loop++;
+ return dst;
+}
+
+/*
+ * scan for the sequence $<data>#<checksum>
+ */
+static void getpacket(char *buffer)
+{
+ unsigned char checksum;
+ unsigned char xmitcsum;
+ unsigned char ch;
+ int count, i, ret, error;
+
+ for (;;) {
+ /*
+ * wait around for the start character,
+ * ignore all other characters
+ */
+ do {
+ gdbstub_io_rx_char(&ch, 0);
+ } while (ch != '$');
+
+ checksum = 0;
+ xmitcsum = -1;
+ count = 0;
+ error = 0;
+
+ /*
+ * now, read until a # or end of buffer is found
+ */
+ while (count < BUFMAX) {
+ ret = gdbstub_io_rx_char(&ch, 0);
+ if (ret < 0)
+ error = ret;
+
+ if (ch == '#')
+ break;
+ checksum += ch;
+ buffer[count] = ch;
+ count++;
+ }
+
+ if (error == -EIO) {
+ gdbstub_proto("### GDB Rx Error - Skipping packet"
+ " ###\n");
+ gdbstub_proto("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-');
+ continue;
+ }
+
+ if (count >= BUFMAX || error)
+ continue;
+
+ buffer[count] = 0;
+
+ /* read the checksum */
+ ret = gdbstub_io_rx_char(&ch, 0);
+ if (ret < 0)
+ error = ret;
+ xmitcsum = hex(ch) << 4;
+
+ ret = gdbstub_io_rx_char(&ch, 0);
+ if (ret < 0)
+ error = ret;
+ xmitcsum |= hex(ch);
+
+ if (error) {
+ if (error == -EIO)
+ gdbstub_io("### GDB Rx Error -"
+ " Skipping packet\n");
+ gdbstub_io("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-');
+ continue;
+ }
+
+ /* check the checksum */
+ if (checksum != xmitcsum) {
+ gdbstub_io("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-'); /* failed checksum */
+ continue;
+ }
+
+ gdbstub_proto("### GDB Rx '$%s#%02x' ###\n", buffer, checksum);
+ gdbstub_io("### GDB Tx ACK\n");
+ gdbstub_io_tx_char('+'); /* successful transfer */
+
+ /*
+ * if a sequence char is present,
+ * reply the sequence ID
+ */
+ if (buffer[2] == ':') {
+ gdbstub_io_tx_char(buffer[0]);
+ gdbstub_io_tx_char(buffer[1]);
+
+ /*
+ * remove sequence chars from buffer
+ */
+ count = 0;
+ while (buffer[count])
+ count++;
+ for (i = 3; i <= count; i++)
+ buffer[i - 3] = buffer[i];
+ }
+
+ break;
+ }
+}
+
+/*
+ * send the packet in buffer.
+ * - return 0 if successfully ACK'd
+ * - return 1 if abandoned due to new incoming packet
+ */
+static int putpacket(char *buffer)
+{
+ unsigned char checksum;
+ unsigned char ch;
+ int count;
+
+ /*
+ * $<packet info>#<checksum>.
+ */
+ gdbstub_proto("### GDB Tx $'%s'#?? ###\n", buffer);
+
+ do {
+ gdbstub_io_tx_char('$');
+ checksum = 0;
+ count = 0;
+
+ while ((ch = buffer[count]) != 0) {
+ gdbstub_io_tx_char(ch);
+ checksum += ch;
+ count += 1;
+ }
+
+ gdbstub_io_tx_char('#');
+ gdbstub_io_tx_char(hexchars[checksum >> 4]);
+ gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+
+ } while (gdbstub_io_rx_char(&ch, 0),
+ ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
+ ch != '-' && ch != '+' &&
+ (gdbstub_io("### GDB Rx ??? %02x\n", ch), 0),
+ ch != '+' && ch != '$');
+
+ if (ch == '+') {
+ gdbstub_io("### GDB Rx ACK\n");
+ return 0;
+ }
+
+ gdbstub_io("### GDB Tx Abandoned\n");
+ gdbstub_rx_unget = ch;
+ return 1;
+}
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+static int hexToInt(char **ptr, int *intValue)
+{
+ int numChars = 0;
+ int hexValue;
+
+ *intValue = 0;
+
+ while (**ptr) {
+ hexValue = hex(**ptr);
+ if (hexValue < 0)
+ break;
+
+ *intValue = (*intValue << 4) | hexValue;
+ numChars++;
+
+ (*ptr)++;
+ }
+
+ return (numChars);
+}
+
+/*
+ * We single-step by setting breakpoints. When an exception
+ * is handled, we need to restore the instructions hoisted
+ * when the breakpoints were set.
+ *
+ * This is where we save the original instructions.
+ */
+static struct gdb_bp_save {
+ u8 *addr;
+ u8 opcode[2];
+} step_bp[2];
+
+static const unsigned char gdbstub_insn_sizes[256] =
+{
+ /* 1 2 3 4 5 6 7 8 9 a b c d e f */
+ 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+ 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+ 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+ 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */
+};
+
+static int __gdbstub_mark_bp(u8 *addr, int ix)
+{
+ if (addr < (u8 *) 0x70000000UL)
+ return 0;
+ /* 70000000-7fffffff: vmalloc area */
+ if (addr < (u8 *) 0x80000000UL)
+ goto okay;
+ if (addr < (u8 *) 0x8c000000UL)
+ return 0;
+ /* 8c000000-93ffffff: SRAM, SDRAM */
+ if (addr < (u8 *) 0x94000000UL)
+ goto okay;
+ return 0;
+
+okay:
+ if (gdbstub_read_byte(addr + 0, &step_bp[ix].opcode[0]) < 0 ||
+ gdbstub_read_byte(addr + 1, &step_bp[ix].opcode[1]) < 0)
+ return 0;
+
+ step_bp[ix].addr = addr;
+ return 1;
+}
+
+static inline void __gdbstub_restore_bp(void)
+{
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ if (step_bp[0].addr) {
+ gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0);
+ gdbstub_write_byte(step_bp[0].opcode[1], step_bp[0].addr + 1);
+ }
+ if (step_bp[1].addr) {
+ gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0);
+ gdbstub_write_byte(step_bp[1].opcode[1], step_bp[1].addr + 1);
+ }
+#else
+ if (step_bp[0].addr)
+ gdbstub_write_byte(step_bp[0].opcode[0], step_bp[0].addr + 0);
+ if (step_bp[1].addr)
+ gdbstub_write_byte(step_bp[1].opcode[0], step_bp[1].addr + 0);
+#endif
+
+ gdbstub_flush_caches = 1;
+
+ step_bp[0].addr = NULL;
+ step_bp[0].opcode[0] = 0;
+ step_bp[0].opcode[1] = 0;
+ step_bp[1].addr = NULL;
+ step_bp[1].opcode[0] = 0;
+ step_bp[1].opcode[1] = 0;
+}
+
+/*
+ * emulate single stepping by means of breakpoint instructions
+ */
+static int gdbstub_single_step(struct pt_regs *regs)
+{
+ unsigned size;
+ uint32_t x;
+ uint8_t cur, *pc, *sp;
+
+ step_bp[0].addr = NULL;
+ step_bp[0].opcode[0] = 0;
+ step_bp[0].opcode[1] = 0;
+ step_bp[1].addr = NULL;
+ step_bp[1].opcode[0] = 0;
+ step_bp[1].opcode[1] = 0;
+ x = 0;
+
+ pc = (u8 *) regs->pc;
+ sp = (u8 *) (regs + 1);
+ if (gdbstub_read_byte(pc, &cur) < 0)
+ return -EFAULT;
+
+ gdbstub_bkpt("Single Step from %p { %02x }\n", pc, cur);
+
+ gdbstub_flush_caches = 1;
+
+ size = gdbstub_insn_sizes[cur];
+ if (size > 0) {
+ if (!__gdbstub_mark_bp(pc + size, 0))
+ goto fault;
+ } else {
+ switch (cur) {
+ /* Bxx (d8,PC) */
+ case 0xc0:
+ case 0xc1:
+ case 0xc2:
+ case 0xc3:
+ case 0xc4:
+ case 0xc5:
+ case 0xc6:
+ case 0xc7:
+ case 0xc8:
+ case 0xc9:
+ case 0xca:
+ if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + 2, 0))
+ goto fault;
+ if ((x < 0 || x > 2) &&
+ !__gdbstub_mark_bp(pc + (s8) x, 1))
+ goto fault;
+ break;
+
+ /* LXX (d8,PC) */
+ case 0xd0:
+ case 0xd1:
+ case 0xd2:
+ case 0xd3:
+ case 0xd4:
+ case 0xd5:
+ case 0xd6:
+ case 0xd7:
+ case 0xd8:
+ case 0xd9:
+ case 0xda:
+ if (!__gdbstub_mark_bp(pc + 1, 0))
+ goto fault;
+ if (regs->pc != regs->lar &&
+ !__gdbstub_mark_bp((u8 *) regs->lar, 1))
+ goto fault;
+ break;
+
+ /* SETLB - loads the next for bytes into the LIR
+ * register */
+ case 0xdb:
+ if (!__gdbstub_mark_bp(pc + 1, 0))
+ goto fault;
+ break;
+
+ /* JMP (d16,PC) or CALL (d16,PC) */
+ case 0xcc:
+ case 0xcd:
+ if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + (s16) x, 0))
+ goto fault;
+ break;
+
+ /* JMP (d32,PC) or CALL (d32,PC) */
+ case 0xdc:
+ case 0xdd:
+ if (gdbstub_read_byte(pc + 1, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(pc + 2, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(pc + 3, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(pc + 4, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + (s32) x, 0))
+ goto fault;
+ break;
+
+ /* RETF */
+ case 0xde:
+ if (!__gdbstub_mark_bp((u8 *) regs->mdr, 0))
+ goto fault;
+ break;
+
+ /* RET */
+ case 0xdf:
+ if (gdbstub_read_byte(pc + 2, (u8 *) &x) < 0)
+ goto fault;
+ sp += (s8)x;
+ if (gdbstub_read_byte(sp + 0, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(sp + 1, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(sp + 2, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(sp + 3, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ break;
+
+ case 0xf0:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+
+ if (cur >= 0xf0 && cur <= 0xf7) {
+ /* JMP (An) / CALLS (An) */
+ switch (cur & 3) {
+ case 0: x = regs->a0; break;
+ case 1: x = regs->a1; break;
+ case 2: x = regs->a2; break;
+ case 3: x = regs->a3; break;
+ }
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ } else if (cur == 0xfc) {
+ /* RETS */
+ if (gdbstub_read_byte(
+ sp + 0, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ sp + 1, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(
+ sp + 2, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(
+ sp + 3, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ } else if (cur == 0xfd) {
+ /* RTI */
+ if (gdbstub_read_byte(
+ sp + 4, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ sp + 5, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(
+ sp + 6, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(
+ sp + 7, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp((u8 *) x, 0))
+ goto fault;
+ } else {
+ if (!__gdbstub_mark_bp(pc + 2, 0))
+ goto fault;
+ }
+
+ break;
+
+ /* potential 3-byte conditional branches */
+ case 0xf8:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + 3, 0))
+ goto fault;
+
+ if (cur >= 0xe8 && cur <= 0xeb) {
+ if (gdbstub_read_byte(
+ pc + 2, ((u8 *) &x) + 0) < 0)
+ goto fault;
+ if ((x < 0 || x > 3) &&
+ !__gdbstub_mark_bp(pc + (s8) x, 1))
+ goto fault;
+ }
+ break;
+
+ case 0xfa:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+
+ if (cur == 0xff) {
+ /* CALLS (d16,PC) */
+ if (gdbstub_read_byte(
+ pc + 2, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ pc + 3, ((u8 *) &x) + 1) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(pc + (s16) x, 0))
+ goto fault;
+ } else {
+ if (!__gdbstub_mark_bp(pc + 4, 0))
+ goto fault;
+ }
+ break;
+
+ case 0xfc:
+ if (gdbstub_read_byte(pc + 1, &cur) < 0)
+ goto fault;
+ if (cur == 0xff) {
+ /* CALLS (d32,PC) */
+ if (gdbstub_read_byte(
+ pc + 2, ((u8 *) &x) + 0) < 0 ||
+ gdbstub_read_byte(
+ pc + 3, ((u8 *) &x) + 1) < 0 ||
+ gdbstub_read_byte(
+ pc + 4, ((u8 *) &x) + 2) < 0 ||
+ gdbstub_read_byte(
+ pc + 5, ((u8 *) &x) + 3) < 0)
+ goto fault;
+ if (!__gdbstub_mark_bp(
+ pc + (s32) x, 0))
+ goto fault;
+ } else {
+ if (!__gdbstub_mark_bp(
+ pc + 6, 0))
+ goto fault;
+ }
+ break;
+
+ }
+ }
+
+ gdbstub_bkpt("Step: %02x at %p; %02x at %p\n",
+ step_bp[0].opcode[0], step_bp[0].addr,
+ step_bp[1].opcode[0], step_bp[1].addr);
+
+ if (step_bp[0].addr) {
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ if (gdbstub_write_byte(0xF7, step_bp[0].addr + 0) < 0 ||
+ gdbstub_write_byte(0xF7, step_bp[0].addr + 1) < 0)
+ goto fault;
+#else
+ if (gdbstub_write_byte(0xFF, step_bp[0].addr + 0) < 0)
+ goto fault;
+#endif
+ }
+
+ if (step_bp[1].addr) {
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ if (gdbstub_write_byte(0xF7, step_bp[1].addr + 0) < 0 ||
+ gdbstub_write_byte(0xF7, step_bp[1].addr + 1) < 0)
+ goto fault;
+#else
+ if (gdbstub_write_byte(0xFF, step_bp[1].addr + 0) < 0)
+ goto fault;
+#endif
+ }
+
+ return 0;
+
+ fault:
+ /* uh-oh - silly address alert, try and restore things */
+ __gdbstub_restore_bp();
+ return -EFAULT;
+}
+
+#ifdef CONFIG_GDBSTUB_CONSOLE
+
+void gdbstub_console_write(struct console *con, const char *p, unsigned n)
+{
+ static const char gdbstub_cr[] = { 0x0d };
+ char outbuf[26];
+ int qty;
+ u8 busy;
+
+ busy = gdbstub_busy;
+ gdbstub_busy = 1;
+
+ outbuf[0] = 'O';
+
+ while (n > 0) {
+ qty = 1;
+
+ while (n > 0 && qty < 20) {
+ mem2hex(p, outbuf + qty, 2, 0);
+ qty += 2;
+ if (*p == 0x0a) {
+ mem2hex(gdbstub_cr, outbuf + qty, 2, 0);
+ qty += 2;
+ }
+ p++;
+ n--;
+ }
+
+ outbuf[qty] = 0;
+ putpacket(outbuf);
+ }
+
+ gdbstub_busy = busy;
+}
+
+static kdev_t gdbstub_console_dev(struct console *con)
+{
+ return MKDEV(1, 3); /* /dev/null */
+}
+
+static struct console gdbstub_console = {
+ .name = "gdb",
+ .write = gdbstub_console_write,
+ .device = gdbstub_console_dev,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+#endif
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in buf.
+ * - if successful, return a pointer to the last char put in buf (NUL)
+ * - in case of mem fault, return NULL
+ * may_fault is non-zero if we are reading from arbitrary memory, but is
+ * currently not used.
+ */
+static
+unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
+{
+ const u8 *mem = _mem;
+ u8 ch[4];
+
+ if ((u32) mem & 1 && count >= 1) {
+ if (gdbstub_read_byte(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ mem++;
+ count--;
+ }
+
+ if ((u32) mem & 3 && count >= 2) {
+ if (gdbstub_read_word(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ *buf++ = hexchars[ch[1] >> 4];
+ *buf++ = hexchars[ch[1] & 0xf];
+ mem += 2;
+ count -= 2;
+ }
+
+ while (count >= 4) {
+ if (gdbstub_read_dword(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ *buf++ = hexchars[ch[1] >> 4];
+ *buf++ = hexchars[ch[1] & 0xf];
+ *buf++ = hexchars[ch[2] >> 4];
+ *buf++ = hexchars[ch[2] & 0xf];
+ *buf++ = hexchars[ch[3] >> 4];
+ *buf++ = hexchars[ch[3] & 0xf];
+ mem += 4;
+ count -= 4;
+ }
+
+ if (count >= 2) {
+ if (gdbstub_read_word(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ *buf++ = hexchars[ch[1] >> 4];
+ *buf++ = hexchars[ch[1] & 0xf];
+ mem += 2;
+ count -= 2;
+ }
+
+ if (count >= 1) {
+ if (gdbstub_read_byte(mem, ch) != 0)
+ return 0;
+ *buf++ = hexchars[ch[0] >> 4];
+ *buf++ = hexchars[ch[0] & 0xf];
+ }
+
+ *buf = 0;
+ return buf;
+}
+
+/*
+ * convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte written
+ * may_fault is non-zero if we are reading from arbitrary memory, but is
+ * currently not used.
+ */
+static
+const char *hex2mem(const char *buf, void *_mem, int count, int may_fault)
+{
+ u8 *mem = _mem;
+ union {
+ u32 val;
+ u8 b[4];
+ } ch;
+
+ if ((u32) mem & 1 && count >= 1) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ if (gdbstub_write_byte(ch.val, mem) != 0)
+ return 0;
+ mem++;
+ count--;
+ }
+
+ if ((u32) mem & 3 && count >= 2) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ ch.b[1] = hex(*buf++) << 4;
+ ch.b[1] |= hex(*buf++);
+ if (gdbstub_write_word(ch.val, mem) != 0)
+ return 0;
+ mem += 2;
+ count -= 2;
+ }
+
+ while (count >= 4) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ ch.b[1] = hex(*buf++) << 4;
+ ch.b[1] |= hex(*buf++);
+ ch.b[2] = hex(*buf++) << 4;
+ ch.b[2] |= hex(*buf++);
+ ch.b[3] = hex(*buf++) << 4;
+ ch.b[3] |= hex(*buf++);
+ if (gdbstub_write_dword(ch.val, mem) != 0)
+ return 0;
+ mem += 4;
+ count -= 4;
+ }
+
+ if (count >= 2) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ ch.b[1] = hex(*buf++) << 4;
+ ch.b[1] |= hex(*buf++);
+ if (gdbstub_write_word(ch.val, mem) != 0)
+ return 0;
+ mem += 2;
+ count -= 2;
+ }
+
+ if (count >= 1) {
+ ch.b[0] = hex(*buf++) << 4;
+ ch.b[0] |= hex(*buf++);
+ if (gdbstub_write_byte(ch.val, mem) != 0)
+ return 0;
+ }
+
+ return buf;
+}
+
+/*
+ * This table contains the mapping between MN10300 exception codes, and
+ * signals, which are primarily what GDB understands. It also indicates
+ * which hardware traps we need to commandeer when initializing the stub.
+ */
+static const struct excep_to_sig_map {
+ enum exception_code excep; /* MN10300 exception code */
+ unsigned char signo; /* Signal that we map this into */
+} excep_to_sig_map[] = {
+ { EXCEP_ITLBMISS, SIGSEGV },
+ { EXCEP_DTLBMISS, SIGSEGV },
+ { EXCEP_TRAP, SIGTRAP },
+ { EXCEP_ISTEP, SIGTRAP },
+ { EXCEP_IBREAK, SIGTRAP },
+ { EXCEP_OBREAK, SIGTRAP },
+ { EXCEP_UNIMPINS, SIGILL },
+ { EXCEP_UNIMPEXINS, SIGILL },
+ { EXCEP_MEMERR, SIGSEGV },
+ { EXCEP_MISALIGN, SIGSEGV },
+ { EXCEP_BUSERROR, SIGBUS },
+ { EXCEP_ILLINSACC, SIGSEGV },
+ { EXCEP_ILLDATACC, SIGSEGV },
+ { EXCEP_IOINSACC, SIGSEGV },
+ { EXCEP_PRIVINSACC, SIGSEGV },
+ { EXCEP_PRIVDATACC, SIGSEGV },
+ { EXCEP_FPU_DISABLED, SIGFPE },
+ { EXCEP_FPU_UNIMPINS, SIGFPE },
+ { EXCEP_FPU_OPERATION, SIGFPE },
+ { EXCEP_WDT, SIGALRM },
+ { EXCEP_NMI, SIGQUIT },
+ { EXCEP_IRQ_LEVEL0, SIGINT },
+ { EXCEP_IRQ_LEVEL1, SIGINT },
+ { EXCEP_IRQ_LEVEL2, SIGINT },
+ { EXCEP_IRQ_LEVEL3, SIGINT },
+ { EXCEP_IRQ_LEVEL4, SIGINT },
+ { EXCEP_IRQ_LEVEL5, SIGINT },
+ { EXCEP_IRQ_LEVEL6, SIGINT },
+ { 0, 0}
+};
+
+/*
+ * convert the MN10300 exception code into a UNIX signal number
+ */
+static int computeSignal(enum exception_code excep)
+{
+ const struct excep_to_sig_map *map;
+
+ for (map = excep_to_sig_map; map->signo; map++)
+ if (map->excep == excep)
+ return map->signo;
+
+ return SIGHUP; /* default for things we don't know about */
+}
+
+static u32 gdbstub_fpcr, gdbstub_fpufs_array[32];
+
+/*
+ *
+ */
+static void gdbstub_store_fpu(void)
+{
+#ifdef CONFIG_FPU
+
+ asm volatile(
+ "or %2,epsw\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ "nop\n"
+ "nop\n"
+#endif
+ "mov %1, a1\n"
+ "fmov fs0, (a1+)\n"
+ "fmov fs1, (a1+)\n"
+ "fmov fs2, (a1+)\n"
+ "fmov fs3, (a1+)\n"
+ "fmov fs4, (a1+)\n"
+ "fmov fs5, (a1+)\n"
+ "fmov fs6, (a1+)\n"
+ "fmov fs7, (a1+)\n"
+ "fmov fs8, (a1+)\n"
+ "fmov fs9, (a1+)\n"
+ "fmov fs10, (a1+)\n"
+ "fmov fs11, (a1+)\n"
+ "fmov fs12, (a1+)\n"
+ "fmov fs13, (a1+)\n"
+ "fmov fs14, (a1+)\n"
+ "fmov fs15, (a1+)\n"
+ "fmov fs16, (a1+)\n"
+ "fmov fs17, (a1+)\n"
+ "fmov fs18, (a1+)\n"
+ "fmov fs19, (a1+)\n"
+ "fmov fs20, (a1+)\n"
+ "fmov fs21, (a1+)\n"
+ "fmov fs22, (a1+)\n"
+ "fmov fs23, (a1+)\n"
+ "fmov fs24, (a1+)\n"
+ "fmov fs25, (a1+)\n"
+ "fmov fs26, (a1+)\n"
+ "fmov fs27, (a1+)\n"
+ "fmov fs28, (a1+)\n"
+ "fmov fs29, (a1+)\n"
+ "fmov fs30, (a1+)\n"
+ "fmov fs31, (a1+)\n"
+ "fmov fpcr, %0\n"
+ : "=d"(gdbstub_fpcr)
+ : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE)
+ : "a1"
+ );
+#endif
+}
+
+/*
+ *
+ */
+static void gdbstub_load_fpu(void)
+{
+#ifdef CONFIG_FPU
+
+ asm volatile(
+ "or %1,epsw\n"
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ "nop\n"
+ "nop\n"
+#endif
+ "mov %0, a1\n"
+ "fmov (a1+), fs0\n"
+ "fmov (a1+), fs1\n"
+ "fmov (a1+), fs2\n"
+ "fmov (a1+), fs3\n"
+ "fmov (a1+), fs4\n"
+ "fmov (a1+), fs5\n"
+ "fmov (a1+), fs6\n"
+ "fmov (a1+), fs7\n"
+ "fmov (a1+), fs8\n"
+ "fmov (a1+), fs9\n"
+ "fmov (a1+), fs10\n"
+ "fmov (a1+), fs11\n"
+ "fmov (a1+), fs12\n"
+ "fmov (a1+), fs13\n"
+ "fmov (a1+), fs14\n"
+ "fmov (a1+), fs15\n"
+ "fmov (a1+), fs16\n"
+ "fmov (a1+), fs17\n"
+ "fmov (a1+), fs18\n"
+ "fmov (a1+), fs19\n"
+ "fmov (a1+), fs20\n"
+ "fmov (a1+), fs21\n"
+ "fmov (a1+), fs22\n"
+ "fmov (a1+), fs23\n"
+ "fmov (a1+), fs24\n"
+ "fmov (a1+), fs25\n"
+ "fmov (a1+), fs26\n"
+ "fmov (a1+), fs27\n"
+ "fmov (a1+), fs28\n"
+ "fmov (a1+), fs29\n"
+ "fmov (a1+), fs30\n"
+ "fmov (a1+), fs31\n"
+ "fmov %2, fpcr\n"
+ :
+ : "g" (&gdbstub_fpufs_array), "i"(EPSW_FE), "d"(gdbstub_fpcr)
+ : "a1"
+ );
+#endif
+}
+
+/*
+ * set a software breakpoint
+ */
+int gdbstub_set_breakpoint(u8 *addr, int len)
+{
+ int bkpt, loop, xloop;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ len = (len + 1) & ~1;
+#endif
+
+ gdbstub_bkpt("setbkpt(%p,%d)\n", addr, len);
+
+ for (bkpt = 255; bkpt >= 0; bkpt--)
+ if (!gdbstub_bkpts[bkpt].addr)
+ break;
+ if (bkpt < 0)
+ return -ENOSPC;
+
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_read_byte(&addr[loop],
+ &gdbstub_bkpts[bkpt].origbytes[loop]
+ ) < 0)
+ return -EFAULT;
+
+ gdbstub_flush_caches = 1;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_write_byte(0xF7, &addr[loop]) < 0)
+ goto restore;
+#else
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_write_byte(0xFF, &addr[loop]) < 0)
+ goto restore;
+#endif
+
+ gdbstub_bkpts[bkpt].addr = addr;
+ gdbstub_bkpts[bkpt].len = len;
+
+ gdbstub_bkpt("Set BKPT[%02x]: %p-%p {%02x%02x%02x%02x%02x%02x%02x}\n",
+ bkpt,
+ gdbstub_bkpts[bkpt].addr,
+ gdbstub_bkpts[bkpt].addr + gdbstub_bkpts[bkpt].len - 1,
+ gdbstub_bkpts[bkpt].origbytes[0],
+ gdbstub_bkpts[bkpt].origbytes[1],
+ gdbstub_bkpts[bkpt].origbytes[2],
+ gdbstub_bkpts[bkpt].origbytes[3],
+ gdbstub_bkpts[bkpt].origbytes[4],
+ gdbstub_bkpts[bkpt].origbytes[5],
+ gdbstub_bkpts[bkpt].origbytes[6]
+ );
+
+ return 0;
+
+restore:
+ for (xloop = 0; xloop < loop; xloop++)
+ gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[xloop],
+ addr + xloop);
+ return -EFAULT;
+}
+
+/*
+ * clear a software breakpoint
+ */
+int gdbstub_clear_breakpoint(u8 *addr, int len)
+{
+ int bkpt, loop;
+
+#ifdef GDBSTUB_USE_F7F7_AS_BREAKPOINT
+ len = (len + 1) & ~1;
+#endif
+
+ gdbstub_bkpt("clearbkpt(%p,%d)\n", addr, len);
+
+ for (bkpt = 255; bkpt >= 0; bkpt--)
+ if (gdbstub_bkpts[bkpt].addr == addr &&
+ gdbstub_bkpts[bkpt].len == len)
+ break;
+ if (bkpt < 0)
+ return -ENOENT;
+
+ gdbstub_bkpts[bkpt].addr = NULL;
+
+ gdbstub_flush_caches = 1;
+
+ for (loop = 0; loop < len; loop++)
+ if (gdbstub_write_byte(gdbstub_bkpts[bkpt].origbytes[loop],
+ addr + loop) < 0)
+ return -EFAULT;
+
+ return 0;
+}
+
+/*
+ * This function does all command processing for interfacing to gdb
+ * - returns 1 if the exception should be skipped, 0 otherwise.
+ */
+static int gdbstub(struct pt_regs *regs, enum exception_code excep)
+{
+ unsigned long *stack;
+ unsigned long epsw, mdr;
+ uint32_t zero, ssp;
+ uint8_t broke;
+ char *ptr;
+ int sigval;
+ int addr;
+ int length;
+ int loop;
+
+ if (excep == EXCEP_FPU_DISABLED)
+ return 0;
+
+ gdbstub_flush_caches = 0;
+
+ mn10300_set_gdbleds(1);
+
+ asm volatile("mov mdr,%0" : "=d"(mdr));
+ asm volatile("mov epsw,%0" : "=d"(epsw));
+ asm volatile("mov %0,epsw"
+ :: "d"((epsw & ~EPSW_IM) | EPSW_IE | EPSW_IM_1));
+
+ gdbstub_store_fpu();
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ /* skip the initial pause loop */
+ if (regs->pc == (unsigned long) __gdbstub_pause)
+ regs->pc = (unsigned long) start_kernel;
+#endif
+
+ /* if we were single stepping, restore the opcodes hoisted for the
+ * breakpoint[s] */
+ broke = 0;
+ if ((step_bp[0].addr && step_bp[0].addr == (u8 *) regs->pc) ||
+ (step_bp[1].addr && step_bp[1].addr == (u8 *) regs->pc))
+ broke = 1;
+
+ __gdbstub_restore_bp();
+
+ if (gdbstub_rx_unget) {
+ sigval = SIGINT;
+ if (gdbstub_rx_unget != 3)
+ goto packet_waiting;
+ gdbstub_rx_unget = 0;
+ }
+
+ stack = (unsigned long *) regs->sp;
+ sigval = broke ? SIGTRAP : computeSignal(excep);
+
+ /* send information about a BUG() */
+ if (!user_mode(regs) && excep == EXCEP_SYSCALL15) {
+ const struct bug_entry *bug;
+
+ bug = find_bug(regs->pc);
+ if (bug)
+ goto found_bug;
+ length = snprintf(trans_buffer, sizeof(trans_buffer),
+ "BUG() at address %lx\n", regs->pc);
+ goto send_bug_pkt;
+
+ found_bug:
+ length = snprintf(trans_buffer, sizeof(trans_buffer),
+ "BUG() at address %lx (%s:%d)\n",
+ regs->pc, bug->file, bug->line);
+
+ send_bug_pkt:
+ ptr = output_buffer;
+ *ptr++ = 'O';
+ ptr = mem2hex(trans_buffer, ptr, length, 0);
+ *ptr = 0;
+ putpacket(output_buffer);
+
+ regs->pc -= 2;
+ sigval = SIGABRT;
+ } else if (regs->pc == (unsigned long) __gdbstub_bug_trap) {
+ regs->pc = regs->mdr;
+ sigval = SIGABRT;
+ }
+
+ /*
+ * send a message to the debugger's user saying what happened if it may
+ * not be clear cut (we can't map exceptions onto signals properly)
+ */
+ if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) {
+ static const char title[] = "Excep ", tbcberr[] = "BCBERR ";
+ static const char crlf[] = "\r\n";
+ char hx;
+ u32 bcberr = BCBERR;
+
+ ptr = output_buffer;
+ *ptr++ = 'O';
+ ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
+
+ hx = hexchars[(excep & 0xf000) >> 12];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(excep & 0x0f00) >> 8];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(excep & 0x00f0) >> 4];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(excep & 0x000f)];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+
+ ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
+ *ptr = 0;
+ putpacket(output_buffer); /* send it off... */
+
+ /* BCBERR */
+ ptr = output_buffer;
+ *ptr++ = 'O';
+ ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
+
+ hx = hexchars[(bcberr & 0xf0000000) >> 28];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x0f000000) >> 24];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x00f00000) >> 20];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x000f0000) >> 16];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x0000f000) >> 12];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x00000f00) >> 8];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x000000f0) >> 4];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+ hx = hexchars[(bcberr & 0x0000000f)];
+ *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf];
+
+ ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
+ *ptr = 0;
+ putpacket(output_buffer); /* send it off... */
+ }
+
+ /*
+ * tell the debugger that an exception has occurred
+ */
+ ptr = output_buffer;
+
+ /*
+ * Send trap type (converted to signal)
+ */
+ *ptr++ = 'T';
+ *ptr++ = hexchars[sigval >> 4];
+ *ptr++ = hexchars[sigval & 0xf];
+
+ /*
+ * Send Error PC
+ */
+ *ptr++ = hexchars[GDB_REGID_PC >> 4];
+ *ptr++ = hexchars[GDB_REGID_PC & 0xf];
+ *ptr++ = ':';
+ ptr = mem2hex(®s->pc, ptr, 4, 0);
+ *ptr++ = ';';
+
+ /*
+ * Send frame pointer
+ */
+ *ptr++ = hexchars[GDB_REGID_FP >> 4];
+ *ptr++ = hexchars[GDB_REGID_FP & 0xf];
+ *ptr++ = ':';
+ ptr = mem2hex(®s->a3, ptr, 4, 0);
+ *ptr++ = ';';
+
+ /*
+ * Send stack pointer
+ */
+ ssp = (unsigned long) (regs + 1);
+ *ptr++ = hexchars[GDB_REGID_SP >> 4];
+ *ptr++ = hexchars[GDB_REGID_SP & 0xf];
+ *ptr++ = ':';
+ ptr = mem2hex(&ssp, ptr, 4, 0);
+ *ptr++ = ';';
+
+ *ptr++ = 0;
+ putpacket(output_buffer); /* send it off... */
+
+packet_waiting:
+ /*
+ * Wait for input from remote GDB
+ */
+ while (1) {
+ output_buffer[0] = 0;
+ getpacket(input_buffer);
+
+ switch (input_buffer[0]) {
+ /* request repeat of last signal number */
+ case '?':
+ output_buffer[0] = 'S';
+ output_buffer[1] = hexchars[sigval >> 4];
+ output_buffer[2] = hexchars[sigval & 0xf];
+ output_buffer[3] = 0;
+ break;
+
+ case 'd':
+ /* toggle debug flag */
+ break;
+
+ /*
+ * Return the value of the CPU registers
+ */
+ case 'g':
+ zero = 0;
+ ssp = (u32) (regs + 1);
+ ptr = output_buffer;
+ ptr = mem2hex(®s->d0, ptr, 4, 0);
+ ptr = mem2hex(®s->d1, ptr, 4, 0);
+ ptr = mem2hex(®s->d2, ptr, 4, 0);
+ ptr = mem2hex(®s->d3, ptr, 4, 0);
+ ptr = mem2hex(®s->a0, ptr, 4, 0);
+ ptr = mem2hex(®s->a1, ptr, 4, 0);
+ ptr = mem2hex(®s->a2, ptr, 4, 0);
+ ptr = mem2hex(®s->a3, ptr, 4, 0);
+
+ ptr = mem2hex(&ssp, ptr, 4, 0); /* 8 */
+ ptr = mem2hex(®s->pc, ptr, 4, 0);
+ ptr = mem2hex(®s->mdr, ptr, 4, 0);
+ ptr = mem2hex(®s->epsw, ptr, 4, 0);
+ ptr = mem2hex(®s->lir, ptr, 4, 0);
+ ptr = mem2hex(®s->lar, ptr, 4, 0);
+ ptr = mem2hex(®s->mdrq, ptr, 4, 0);
+
+ ptr = mem2hex(®s->e0, ptr, 4, 0); /* 15 */
+ ptr = mem2hex(®s->e1, ptr, 4, 0);
+ ptr = mem2hex(®s->e2, ptr, 4, 0);
+ ptr = mem2hex(®s->e3, ptr, 4, 0);
+ ptr = mem2hex(®s->e4, ptr, 4, 0);
+ ptr = mem2hex(®s->e5, ptr, 4, 0);
+ ptr = mem2hex(®s->e6, ptr, 4, 0);
+ ptr = mem2hex(®s->e7, ptr, 4, 0);
+
+ ptr = mem2hex(&ssp, ptr, 4, 0);
+ ptr = mem2hex(®s, ptr, 4, 0);
+ ptr = mem2hex(®s->sp, ptr, 4, 0);
+ ptr = mem2hex(®s->mcrh, ptr, 4, 0); /* 26 */
+ ptr = mem2hex(®s->mcrl, ptr, 4, 0);
+ ptr = mem2hex(®s->mcvf, ptr, 4, 0);
+
+ ptr = mem2hex(&gdbstub_fpcr, ptr, 4, 0); /* 29 - FPCR */
+ ptr = mem2hex(&zero, ptr, 4, 0);
+ ptr = mem2hex(&zero, ptr, 4, 0);
+ for (loop = 0; loop < 32; loop++)
+ ptr = mem2hex(&gdbstub_fpufs_array[loop],
+ ptr, 4, 0); /* 32 - FS0-31 */
+
+ break;
+
+ /*
+ * set the value of the CPU registers - return OK
+ */
+ case 'G':
+ {
+ const char *ptr;
+
+ ptr = &input_buffer[1];
+ ptr = hex2mem(ptr, ®s->d0, 4, 0);
+ ptr = hex2mem(ptr, ®s->d1, 4, 0);
+ ptr = hex2mem(ptr, ®s->d2, 4, 0);
+ ptr = hex2mem(ptr, ®s->d3, 4, 0);
+ ptr = hex2mem(ptr, ®s->a0, 4, 0);
+ ptr = hex2mem(ptr, ®s->a1, 4, 0);
+ ptr = hex2mem(ptr, ®s->a2, 4, 0);
+ ptr = hex2mem(ptr, ®s->a3, 4, 0);
+
+ ptr = hex2mem(ptr, &ssp, 4, 0); /* 8 */
+ ptr = hex2mem(ptr, ®s->pc, 4, 0);
+ ptr = hex2mem(ptr, ®s->mdr, 4, 0);
+ ptr = hex2mem(ptr, ®s->epsw, 4, 0);
+ ptr = hex2mem(ptr, ®s->lir, 4, 0);
+ ptr = hex2mem(ptr, ®s->lar, 4, 0);
+ ptr = hex2mem(ptr, ®s->mdrq, 4, 0);
+
+ ptr = hex2mem(ptr, ®s->e0, 4, 0); /* 15 */
+ ptr = hex2mem(ptr, ®s->e1, 4, 0);
+ ptr = hex2mem(ptr, ®s->e2, 4, 0);
+ ptr = hex2mem(ptr, ®s->e3, 4, 0);
+ ptr = hex2mem(ptr, ®s->e4, 4, 0);
+ ptr = hex2mem(ptr, ®s->e5, 4, 0);
+ ptr = hex2mem(ptr, ®s->e6, 4, 0);
+ ptr = hex2mem(ptr, ®s->e7, 4, 0);
+
+ ptr = hex2mem(ptr, &ssp, 4, 0);
+ ptr = hex2mem(ptr, &zero, 4, 0);
+ ptr = hex2mem(ptr, ®s->sp, 4, 0);
+ ptr = hex2mem(ptr, ®s->mcrh, 4, 0); /* 26 */
+ ptr = hex2mem(ptr, ®s->mcrl, 4, 0);
+ ptr = hex2mem(ptr, ®s->mcvf, 4, 0);
+
+ ptr = hex2mem(ptr, &zero, 4, 0); /* 29 - FPCR */
+ ptr = hex2mem(ptr, &zero, 4, 0);
+ ptr = hex2mem(ptr, &zero, 4, 0);
+ for (loop = 0; loop < 32; loop++) /* 32 - FS0-31 */
+ ptr = hex2mem(ptr, &zero, 4, 0);
+
+#if 0
+ /*
+ * See if the stack pointer has moved. If so, then copy
+ * the saved locals and ins to the new location.
+ */
+ unsigned long *newsp = (unsigned long *) registers[SP];
+ if (sp != newsp)
+ sp = memcpy(newsp, sp, 16 * 4);
+#endif
+
+ gdbstub_strcpy(output_buffer, "OK");
+ }
+ break;
+
+ /*
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA
+ */
+ case 'm':
+ ptr = &input_buffer[1];
+
+ if (hexToInt(&ptr, &addr) &&
+ *ptr++ == ',' &&
+ hexToInt(&ptr, &length)
+ ) {
+ if (mem2hex((char *) addr, output_buffer,
+ length, 1))
+ break;
+ gdbstub_strcpy(output_buffer, "E03");
+ } else {
+ gdbstub_strcpy(output_buffer, "E01");
+ }
+ break;
+
+ /*
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA
+ * return OK
+ */
+ case 'M':
+ ptr = &input_buffer[1];
+
+ if (hexToInt(&ptr, &addr) &&
+ *ptr++ == ',' &&
+ hexToInt(&ptr, &length) &&
+ *ptr++ == ':'
+ ) {
+ if (hex2mem(ptr, (char *) addr, length, 1))
+ gdbstub_strcpy(output_buffer, "OK");
+ else
+ gdbstub_strcpy(output_buffer, "E03");
+
+ gdbstub_flush_caches = 1;
+ } else {
+ gdbstub_strcpy(output_buffer, "E02");
+ }
+ break;
+
+ /*
+ * cAA..AA Continue at address AA..AA(optional)
+ */
+ case 'c':
+ /* try to read optional parameter, pc unchanged if no
+ * parm */
+
+ ptr = &input_buffer[1];
+ if (hexToInt(&ptr, &addr))
+ regs->pc = addr;
+ goto done;
+
+ /*
+ * kill the program
+ */
+ case 'k' :
+ goto done; /* just continue */
+
+ /*
+ * Reset the whole machine (FIXME: system dependent)
+ */
+ case 'r':
+ break;
+
+ /*
+ * Step to next instruction
+ */
+ case 's':
+ /*
+ * using the T flag doesn't seem to perform single
+ * stepping (it seems to wind up being caught by the
+ * JTAG unit), so we have to use breakpoints and
+ * continue instead.
+ */
+ if (gdbstub_single_step(regs) < 0)
+ /* ignore any fault error for now */
+ gdbstub_printk("unable to set single-step"
+ " bp\n");
+ goto done;
+
+ /*
+ * Set baud rate (bBB)
+ */
+ case 'b':
+ do {
+ int baudrate;
+
+ ptr = &input_buffer[1];
+ if (!hexToInt(&ptr, &baudrate)) {
+ gdbstub_strcpy(output_buffer, "B01");
+ break;
+ }
+
+ if (baudrate) {
+ /* ACK before changing speed */
+ putpacket("OK");
+ gdbstub_io_set_baud(baudrate);
+ }
+ } while (0);
+ break;
+
+ /*
+ * Set breakpoint
+ */
+ case 'Z':
+ ptr = &input_buffer[1];
+
+ if (!hexToInt(&ptr, &loop) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &addr) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &length)
+ ) {
+ gdbstub_strcpy(output_buffer, "E01");
+ break;
+ }
+
+ /* only support software breakpoints */
+ gdbstub_strcpy(output_buffer, "E03");
+ if (loop != 0 ||
+ length < 1 ||
+ length > 7 ||
+ (unsigned long) addr < 4096)
+ break;
+
+ if (gdbstub_set_breakpoint((u8 *) addr, length) < 0)
+ break;
+
+ gdbstub_strcpy(output_buffer, "OK");
+ break;
+
+ /*
+ * Clear breakpoint
+ */
+ case 'z':
+ ptr = &input_buffer[1];
+
+ if (!hexToInt(&ptr, &loop) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &addr) || *ptr++ != ',' ||
+ !hexToInt(&ptr, &length)
+ ) {
+ gdbstub_strcpy(output_buffer, "E01");
+ break;
+ }
+
+ /* only support software breakpoints */
+ gdbstub_strcpy(output_buffer, "E03");
+ if (loop != 0 ||
+ length < 1 ||
+ length > 7 ||
+ (unsigned long) addr < 4096)
+ break;
+
+ if (gdbstub_clear_breakpoint((u8 *) addr, length) < 0)
+ break;
+
+ gdbstub_strcpy(output_buffer, "OK");
+ break;
+
+ default:
+ gdbstub_proto("### GDB Unsupported Cmd '%s'\n",
+ input_buffer);
+ break;
+ }
+
+ /* reply to the request */
+ putpacket(output_buffer);
+ }
+
+done:
+ /*
+ * Need to flush the instruction cache here, as we may
+ * have deposited a breakpoint, and the icache probably
+ * has no way of knowing that a data ref to some location
+ * may have changed something that is in the instruction
+ * cache.
+ * NB: We flush both caches, just to be sure...
+ */
+ if (gdbstub_flush_caches)
+ gdbstub_purge_cache();
+
+ gdbstub_load_fpu();
+ mn10300_set_gdbleds(0);
+ if (excep == EXCEP_NMI)
+ NMICR = NMICR_NMIF;
+
+ touch_softlockup_watchdog();
+
+ local_irq_restore(epsw);
+ return 1;
+}
+
+/*
+ * handle event interception
+ */
+asmlinkage int gdbstub_intercept(struct pt_regs *regs,
+ enum exception_code excep)
+{
+ static u8 notfirst = 1;
+ int ret;
+
+ if (gdbstub_busy)
+ gdbstub_printk("--> gdbstub reentered itself\n");
+ gdbstub_busy = 1;
+
+ if (notfirst) {
+ unsigned long mdr;
+ asm("mov mdr,%0" : "=d"(mdr));
+
+ gdbstub_entry(
+ "--> gdbstub_intercept(%p,%04x) [MDR=%lx PC=%lx]\n",
+ regs, excep, mdr, regs->pc);
+
+ gdbstub_entry(
+ "PC: %08lx EPSW: %08lx SSP: %08lx mode: %s\n",
+ regs->pc, regs->epsw, (unsigned long) &ret,
+ user_mode(regs) ? "User" : "Super");
+ gdbstub_entry(
+ "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
+ regs->d0, regs->d1, regs->d2, regs->d3);
+ gdbstub_entry(
+ "a0: %08lx a1: %08lx a2: %08lx a3: %08lx\n",
+ regs->a0, regs->a1, regs->a2, regs->a3);
+ gdbstub_entry(
+ "e0: %08lx e1: %08lx e2: %08lx e3: %08lx\n",
+ regs->e0, regs->e1, regs->e2, regs->e3);
+ gdbstub_entry(
+ "e4: %08lx e5: %08lx e6: %08lx e7: %08lx\n",
+ regs->e4, regs->e5, regs->e6, regs->e7);
+ gdbstub_entry(
+ "lar: %08lx lir: %08lx mdr: %08lx usp: %08lx\n",
+ regs->lar, regs->lir, regs->mdr, regs->sp);
+ gdbstub_entry(
+ "cvf: %08lx crl: %08lx crh: %08lx drq: %08lx\n",
+ regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq);
+ gdbstub_entry(
+ "threadinfo=%p task=%p)\n",
+ current_thread_info(), current);
+ } else {
+ notfirst = 1;
+ }
+
+ ret = gdbstub(regs, excep);
+
+ gdbstub_entry("<-- gdbstub_intercept()\n");
+ gdbstub_busy = 0;
+ return ret;
+}
+
+/*
+ * handle the GDB stub itself causing an exception
+ */
+asmlinkage void gdbstub_exception(struct pt_regs *regs,
+ enum exception_code excep)
+{
+ unsigned long mdr;
+
+ asm("mov mdr,%0" : "=d"(mdr));
+ gdbstub_entry("--> gdbstub exception({%p},%04x) [MDR=%lx]\n",
+ regs, excep, mdr);
+
+ while ((unsigned long) regs == 0xffffffff) {}
+
+ /* handle guarded memory accesses where we know it might fault */
+ if (regs->pc == (unsigned) gdbstub_read_byte_guard) {
+ regs->pc = (unsigned) gdbstub_read_byte_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_read_word_guard) {
+ regs->pc = (unsigned) gdbstub_read_word_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_read_dword_guard) {
+ regs->pc = (unsigned) gdbstub_read_dword_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_write_byte_guard) {
+ regs->pc = (unsigned) gdbstub_write_byte_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_write_word_guard) {
+ regs->pc = (unsigned) gdbstub_write_word_cont;
+ goto fault;
+ }
+
+ if (regs->pc == (unsigned) gdbstub_write_dword_guard) {
+ regs->pc = (unsigned) gdbstub_write_dword_cont;
+ goto fault;
+ }
+
+ gdbstub_printk("\n### GDB stub caused an exception ###\n");
+
+ /* something went horribly wrong */
+ console_verbose();
+ show_registers(regs);
+
+ panic("GDB Stub caused an unexpected exception - can't continue\n");
+
+ /* we caught an attempt by the stub to access silly memory */
+fault:
+ gdbstub_entry("<-- gdbstub exception() = EFAULT\n");
+ regs->d0 = -EFAULT;
+ return;
+}
+
+/*
+ * send an exit message to GDB
+ */
+void gdbstub_exit(int status)
+{
+ unsigned char checksum;
+ unsigned char ch;
+ int count;
+
+ gdbstub_busy = 1;
+ output_buffer[0] = 'W';
+ output_buffer[1] = hexchars[(status >> 4) & 0x0F];
+ output_buffer[2] = hexchars[status & 0x0F];
+ output_buffer[3] = 0;
+
+ gdbstub_io_tx_char('$');
+ checksum = 0;
+ count = 0;
+
+ while ((ch = output_buffer[count]) != 0) {
+ gdbstub_io_tx_char(ch);
+ checksum += ch;
+ count += 1;
+ }
+
+ gdbstub_io_tx_char('#');
+ gdbstub_io_tx_char(hexchars[checksum >> 4]);
+ gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+
+ /* make sure the output is flushed, or else RedBoot might clobber it */
+ gdbstub_io_tx_flush();
+
+ gdbstub_busy = 0;
+}
+
+/*
+ * initialise the GDB stub
+ */
+asmlinkage void __init gdbstub_init(void)
+{
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ unsigned char ch;
+ int ret;
+#endif
+
+ gdbstub_busy = 1;
+
+ printk(KERN_INFO "%s", gdbstub_banner);
+
+ gdbstub_io_init();
+
+ gdbstub_entry("--> gdbstub_init\n");
+
+ /* try to talk to GDB (or anyone insane enough to want to type GDB
+ * protocol by hand) */
+ gdbstub_io("### GDB Tx ACK\n");
+ gdbstub_io_tx_char('+'); /* 'hello world' */
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ gdbstub_printk("GDB Stub waiting for packet\n");
+
+ /* in case GDB is started before us, ACK any packets that are already
+ * sitting there (presumably "$?#xx")
+ */
+ do { gdbstub_io_rx_char(&ch, 0); } while (ch != '$');
+ do { gdbstub_io_rx_char(&ch, 0); } while (ch != '#');
+ /* eat first csum byte */
+ do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0);
+ /* eat second csum byte */
+ do { ret = gdbstub_io_rx_char(&ch, 0); } while (ret != 0);
+
+ gdbstub_io("### GDB Tx NAK\n");
+ gdbstub_io_tx_char('-'); /* NAK it */
+
+#else
+ printk("GDB Stub ready\n");
+#endif
+
+ gdbstub_busy = 0;
+ gdbstub_entry("<-- gdbstub_init\n");
+}
+
+/*
+ * register the console at a more appropriate time
+ */
+#ifdef CONFIG_GDBSTUB_CONSOLE
+static int __init gdbstub_postinit(void)
+{
+ printk(KERN_NOTICE "registering console\n");
+ register_console(&gdbstub_console);
+ return 0;
+}
+
+__initcall(gdbstub_postinit);
+#endif
+
+/*
+ * handle character reception on GDB serial port
+ * - jump into the GDB stub if BREAK is detected on the serial line
+ */
+asmlinkage void gdbstub_rx_irq(struct pt_regs *regs, enum exception_code excep)
+{
+ char ch;
+ int ret;
+
+ gdbstub_entry("--> gdbstub_rx_irq\n");
+
+ do {
+ ret = gdbstub_io_rx_char(&ch, 1);
+ if (ret != -EIO && ret != -EAGAIN) {
+ if (ret != -EINTR)
+ gdbstub_rx_unget = ch;
+ gdbstub(regs, excep);
+ }
+ } while (ret != -EAGAIN);
+
+ gdbstub_entry("<-- gdbstub_rx_irq\n");
+}
--- /dev/null
+/* Boot entry point for MN10300 kernel
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <linux/linkage.h>
+#include <linux/serial_reg.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/frame.inc>
+#include <asm/param.h>
+#include <asm/unit/serial.h>
+
+ .section .text.head,"ax"
+
+###############################################################################
+#
+# bootloader entry point
+#
+###############################################################################
+ .globl _start
+ .type _start,@function
+_start:
+ # save commandline pointer
+ mov d0,a3
+
+ # preload the PGD pointer register
+ mov swapper_pg_dir,d0
+ mov d0,(PTBR)
+
+ # turn on the TLBs
+ mov MMUCTR_IIV|MMUCTR_DIV,d0
+ mov d0,(MMUCTR)
+ mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0
+ mov d0,(MMUCTR)
+
+ # turn on AM33v2 exception handling mode and set the trap table base
+ movhu (CPUP),d0
+ or CPUP_EXM_AM33V2,d0
+ movhu d0,(CPUP)
+ mov CONFIG_INTERRUPT_VECTOR_BASE,d0
+ mov d0,(TBR)
+
+ # invalidate and enable both of the caches
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0) # turn off first
+ mov CHCTR_ICINV|CHCTR_DCINV,d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy
+ lne
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_CACHE_WBACK
+#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
+#else
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0
+#endif /* CACHE_DISABLED */
+#else
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
+#endif /* WBACK */
+ movhu d0,(a0) # enable
+#endif /* NOWRALLOC */
+
+ # turn on RTS on the debug serial port if applicable
+#ifdef CONFIG_MN10300_UNIT_ASB2305
+ bset UART_MCR_RTS,(ASB2305_DEBUG_MCR)
+#endif
+
+ # clear the BSS area
+ mov __bss_start,a0
+ mov __bss_stop,a1
+ clr d0
+bssclear:
+ cmp a1,a0
+ bge bssclear_end
+ mov d0,(a0)
+ inc4 a0
+ bra bssclear
+bssclear_end:
+
+ # retrieve the parameters (including command line) before we overwrite
+ # them
+ cmp 0xabadcafe,d1
+ bne __no_parameters
+
+__copy_parameters:
+ mov redboot_command_line,a0
+ mov a0,a1
+ add COMMAND_LINE_SIZE,a1
+1:
+ movbu (a3),d0
+ inc a3
+ movbu d0,(a0)
+ inc a0
+ cmp a1,a0
+ blt 1b
+
+ mov redboot_platform_name,a0
+ mov a0,a1
+ add COMMAND_LINE_SIZE,a1
+ mov d2,a3
+1:
+ movbu (a3),d0
+ inc a3
+ movbu d0,(a0)
+ inc a0
+ cmp a1,a0
+ blt 1b
+
+__no_parameters:
+
+ # set up the registers with recognisable rubbish in them
+ mov init_thread_union+THREAD_SIZE-12,sp
+
+ mov 0xea01eaea,d0
+ mov d0,(4,sp) # EPSW save area
+ mov 0xea02eaea,d0
+ mov d0,(8,sp) # PC save area
+
+ mov 0xeb0060ed,d0
+ mov d0,mdr
+ mov 0xeb0061ed,d0
+ mov d0,mdrq
+ mov 0xeb0062ed,d0
+ mov d0,mcrh
+ mov 0xeb0063ed,d0
+ mov d0,mcrl
+ mov 0xeb0064ed,d0
+ mov d0,mcvf
+ mov 0xed0065ed,a3
+ mov a3,usp
+
+ mov 0xed00e0ed,e0
+ mov 0xed00e1ed,e1
+ mov 0xed00e2ed,e2
+ mov 0xed00e3ed,e3
+ mov 0xed00e4ed,e4
+ mov 0xed00e5ed,e5
+ mov 0xed00e6ed,e6
+ mov 0xed00e7ed,e7
+
+ mov 0xed00d0ed,d0
+ mov 0xed00d1ed,d1
+ mov 0xed00d2ed,d2
+ mov 0xed00d3ed,d3
+ mov 0xed00a0ed,a0
+ mov 0xed00a1ed,a1
+ mov 0xed00a2ed,a2
+ mov 0,a3
+
+ # set up the initial kernel stack
+ SAVE_ALL
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+ # put different recognisable rubbish in the regs
+ mov 0xfb0060ed,d0
+ mov d0,mdr
+ mov 0xfb0061ed,d0
+ mov d0,mdrq
+ mov 0xfb0062ed,d0
+ mov d0,mcrh
+ mov 0xfb0063ed,d0
+ mov d0,mcrl
+ mov 0xfb0064ed,d0
+ mov d0,mcvf
+ mov 0xfd0065ed,a0
+ mov a0,usp
+
+ mov 0xfd00e0ed,e0
+ mov 0xfd00e1ed,e1
+ mov 0xfd00e2ed,e2
+ mov 0xfd00e3ed,e3
+ mov 0xfd00e4ed,e4
+ mov 0xfd00e5ed,e5
+ mov 0xfd00e6ed,e6
+ mov 0xfd00e7ed,e7
+
+ mov 0xfd00d0ed,d0
+ mov 0xfd00d1ed,d1
+ mov 0xfd00d2ed,d2
+ mov 0xfd00d3ed,d3
+ mov 0xfd00a0ed,a0
+ mov 0xfd00a1ed,a1
+ mov 0xfd00a2ed,a2
+
+ # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ mov init_task,e2
+#endif
+
+ # initialise the processor and the unit
+ call processor_init[],0
+ call unit_init[],0
+
+#ifdef CONFIG_GDBSTUB
+ call gdbstub_init[],0
+
+#ifdef CONFIG_GDBSTUB_IMMEDIATE
+ .globl __gdbstub_pause
+__gdbstub_pause:
+ bra __gdbstub_pause
+#endif
+#endif
+
+ jmp start_kernel
+ .size _start, _start-.
+ENTRY(__head_end)
+
+/*
+ * This is initialized to disallow all access to the low 2G region
+ * - the high 2G region is managed directly by the MMU
+ * - range 0x70000000-0x7C000000 are initialised for use by VMALLOC
+ */
+ .section .bss
+ .balign PAGE_SIZE
+ENTRY(swapper_pg_dir)
+ .space PTRS_PER_PGD*4
+
+/*
+ * The page tables are initialized to only 8MB here - the final page
+ * tables are set up later depending on memory size.
+ */
+
+ .balign PAGE_SIZE
+ENTRY(empty_zero_page)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(empty_bad_page)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(empty_bad_pte_table)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(large_page_table)
+ .space PAGE_SIZE
+
+ .balign PAGE_SIZE
+ENTRY(kernel_vmalloc_ptes)
+ .space ((VMALLOC_END-VMALLOC_START)/PAGE_SIZE)*4
--- /dev/null
+/* MN10300 Initial task definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+ { INIT_THREAD_INFO(init_task) };
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
--- /dev/null
+/* Internal definitions for the arch part of the core kernel
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * kthread.S
+ */
+extern int kernel_thread_helper(int);
+
+/*
+ * entry.S
+ */
+extern void ret_from_fork(struct task_struct *) __attribute__((noreturn));
--- /dev/null
+/* MN10300 Misaligned multibyte-word I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+/*
+ * output data from a potentially misaligned buffer
+ */
+void __outsl(unsigned long addr, const void *buffer, int count)
+{
+ const unsigned char *buf = buffer;
+ unsigned long val;
+
+ while (count--) {
+ memcpy(&val, buf, 4);
+ outl(val, addr);
+ buf += 4;
+ }
+}
+EXPORT_SYMBOL(__outsl);
--- /dev/null
+/* MN10300 Arch-specific interrupt handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <asm/setup.h>
+
+unsigned long __mn10300_irq_enabled_epsw = EPSW_IE | EPSW_IM_7;
+EXPORT_SYMBOL(__mn10300_irq_enabled_epsw);
+
+atomic_t irq_err_count;
+
+/*
+ * MN10300 INTC controller operations
+ */
+static void mn10300_cpupic_disable(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_enable(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_ack(unsigned int irq)
+{
+ u16 tmp;
+ *(volatile u8 *) &GxICR(irq) = GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_mask(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL);
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_mask_ack(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_unmask(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
+ tmp = GxICR(irq);
+}
+
+static void mn10300_cpupic_end(unsigned int irq)
+{
+ u16 tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
+ tmp = GxICR(irq);
+}
+
+static struct irq_chip mn10300_cpu_pic = {
+ .name = "cpu",
+ .disable = mn10300_cpupic_disable,
+ .enable = mn10300_cpupic_enable,
+ .ack = mn10300_cpupic_ack,
+ .mask = mn10300_cpupic_mask,
+ .mask_ack = mn10300_cpupic_mask_ack,
+ .unmask = mn10300_cpupic_unmask,
+ .end = mn10300_cpupic_end,
+};
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(int irq)
+{
+ printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+/*
+ * change the level at which an IRQ executes
+ * - must not be called whilst interrupts are being processed!
+ */
+void set_intr_level(int irq, u16 level)
+{
+ u16 tmp;
+
+ if (in_interrupt())
+ BUG();
+
+ tmp = GxICR(irq);
+ GxICR(irq) = (tmp & GxICR_ENABLE) | level;
+ tmp = GxICR(irq);
+}
+
+/*
+ * mark an interrupt to be ACK'd after interrupt handlers have been run rather
+ * than before
+ * - see Documentation/mn10300/features.txt
+ */
+void set_intr_postackable(int irq)
+{
+ set_irq_handler(irq, handle_level_irq);
+}
+
+/*
+ * initialise the interrupt system
+ */
+void __init init_IRQ(void)
+{
+ int irq;
+
+ for (irq = 0; irq < NR_IRQS; irq++)
+ if (irq_desc[irq].chip == &no_irq_type)
+ set_irq_chip_and_handler(irq, &mn10300_cpu_pic,
+ handle_edge_irq);
+ unit_init_IRQ();
+}
+
+/*
+ * handle normal device IRQs
+ */
+asmlinkage void do_IRQ(void)
+{
+ unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw;
+ int irq;
+
+ sp = current_stack_pointer();
+ if (sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN)
+ BUG();
+
+ /* make sure local_irq_enable() doesn't muck up the interrupt priority
+ * setting in EPSW */
+ old_irq_enabled_epsw = __mn10300_irq_enabled_epsw;
+ local_save_flags(epsw);
+ __mn10300_irq_enabled_epsw = EPSW_IE | (EPSW_IM & epsw);
+ irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL;
+
+ __IRQ_STAT(smp_processor_id(), __irq_count)++;
+
+ irq_enter();
+
+ for (;;) {
+ /* ask the interrupt controller for the next IRQ to process
+ * - the result we get depends on EPSW.IM
+ */
+ irq = IAGR & IAGR_GN;
+ if (!irq)
+ break;
+
+ local_irq_restore(irq_disabled_epsw);
+
+ generic_handle_irq(irq >> 2);
+
+ /* restore IRQ controls for IAGR access */
+ local_irq_restore(epsw);
+ }
+
+ __mn10300_irq_enabled_epsw = old_irq_enabled_epsw;
+
+ irq_exit();
+}
+
+/*
+ * Display interrupt management information through /proc/interrupts
+ */
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, j, cpu;
+ struct irqaction *action;
+ unsigned long flags;
+
+ switch (i) {
+ /* display column title bar naming CPUs */
+ case 0:
+ seq_printf(p, " ");
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "CPU%d ", j);
+ seq_putc(p, '\n');
+ break;
+
+ /* display information rows, one per active CPU */
+ case 1 ... NR_IRQS - 1:
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+
+ action = irq_desc[i].action;
+ if (action) {
+ seq_printf(p, "%3d: ", i);
+ for_each_present_cpu(cpu)
+ seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
+ seq_printf(p, " %14s.%u", irq_desc[i].chip->name,
+ (GxICR(i) & GxICR_LEVEL) >>
+ GxICR_LEVEL_SHIFT);
+ seq_printf(p, " %s", action->name);
+
+ for (action = action->next;
+ action;
+ action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+ }
+
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ break;
+
+ /* polish off with NMI and error counters */
+ case NR_IRQS:
+ seq_printf(p, "NMI: ");
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "%10u ", nmi_count(j));
+ seq_putc(p, '\n');
+
+ seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+ break;
+ }
+
+ return 0;
+}
--- /dev/null
+/* MN10300 In-kernel program execution
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/linkage.h>
+#include <asm/unistd.h>
+
+###############################################################################
+#
+# Do a system call from kernel instead of calling sys_execve so we end up with
+# proper pt_regs.
+#
+# int kernel_execve(const char *filename, char *const argv[],
+# char *const envp[])
+#
+# On entry: D0/D1/8(SP): arguments to function
+# On return: D0: syscall return.
+#
+###############################################################################
+ .globl kernel_execve
+ .type kernel_execve,@function
+kernel_execve:
+ mov a3,a1
+ mov d0,a0
+ mov (12,sp),a3
+ mov +__NR_execve,d0
+ syscall 0
+ mov a1,a3
+ rets
+
+ .size kernel_execve,.-kernel_execve
--- /dev/null
+/* MN10300 Kernel probes implementation
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/kprobes.h>
+#include <linux/ptrace.h>
+#include <linux/spinlock.h>
+#include <linux/preempt.h>
+#include <linux/kdebug.h>
+#include <asm/cacheflush.h>
+
+struct kretprobe_blackpoint kretprobe_blacklist[] = { { NULL, NULL } };
+const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist);
+
+/* kprobe_status settings */
+#define KPROBE_HIT_ACTIVE 0x00000001
+#define KPROBE_HIT_SS 0x00000002
+
+static struct kprobe *current_kprobe;
+static unsigned long current_kprobe_orig_pc;
+static unsigned long current_kprobe_next_pc;
+static int current_kprobe_ss_flags;
+static unsigned long kprobe_status;
+static kprobe_opcode_t current_kprobe_ss_buf[MAX_INSN_SIZE + 2];
+static unsigned long current_kprobe_bp_addr;
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+
+
+/* singlestep flag bits */
+#define SINGLESTEP_BRANCH 1
+#define SINGLESTEP_PCREL 2
+
+#define READ_BYTE(p, valp) \
+ do { *(u8 *)(valp) = *(u8 *)(p); } while (0)
+
+#define READ_WORD16(p, valp) \
+ do { \
+ READ_BYTE((p), (valp)); \
+ READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1); \
+ } while (0)
+
+#define READ_WORD32(p, valp) \
+ do { \
+ READ_BYTE((p), (valp)); \
+ READ_BYTE((u8 *)(p) + 1, (u8 *)(valp) + 1); \
+ READ_BYTE((u8 *)(p) + 2, (u8 *)(valp) + 2); \
+ READ_BYTE((u8 *)(p) + 3, (u8 *)(valp) + 3); \
+ } while (0)
+
+
+static const u8 mn10300_insn_sizes[256] =
+{
+ /* 1 2 3 4 5 6 7 8 9 a b c d e f */
+ 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, 1, 3, 3, 3, /* 0 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 1 */
+ 2, 2, 2, 2, 3, 3, 3, 3, 2, 2, 2, 2, 3, 3, 3, 3, /* 2 */
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 1, 1, 1, 1, /* 3 */
+ 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, 1, 1, 2, 2, /* 4 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, /* 5 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 6 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* 7 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 8 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* 9 */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* a */
+ 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, 1, 1, 1, 1, 2, /* b */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 2, 2, /* c */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* d */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* e */
+ 0, 2, 2, 2, 2, 2, 2, 4, 0, 3, 0, 4, 0, 6, 7, 1 /* f */
+};
+
+#define LT (1 << 0)
+#define GT (1 << 1)
+#define GE (1 << 2)
+#define LE (1 << 3)
+#define CS (1 << 4)
+#define HI (1 << 5)
+#define CC (1 << 6)
+#define LS (1 << 7)
+#define EQ (1 << 8)
+#define NE (1 << 9)
+#define RA (1 << 10)
+#define VC (1 << 11)
+#define VS (1 << 12)
+#define NC (1 << 13)
+#define NS (1 << 14)
+
+static const u16 cond_table[] = {
+ /* V C N Z */
+ /* 0 0 0 0 */ (NE | NC | CC | VC | GE | GT | HI),
+ /* 0 0 0 1 */ (EQ | NC | CC | VC | GE | LE | LS),
+ /* 0 0 1 0 */ (NE | NS | CC | VC | LT | LE | HI),
+ /* 0 0 1 1 */ (EQ | NS | CC | VC | LT | LE | LS),
+ /* 0 1 0 0 */ (NE | NC | CS | VC | GE | GT | LS),
+ /* 0 1 0 1 */ (EQ | NC | CS | VC | GE | LE | LS),
+ /* 0 1 1 0 */ (NE | NS | CS | VC | LT | LE | LS),
+ /* 0 1 1 1 */ (EQ | NS | CS | VC | LT | LE | LS),
+ /* 1 0 0 0 */ (NE | NC | CC | VS | LT | LE | HI),
+ /* 1 0 0 1 */ (EQ | NC | CC | VS | LT | LE | LS),
+ /* 1 0 1 0 */ (NE | NS | CC | VS | GE | GT | HI),
+ /* 1 0 1 1 */ (EQ | NS | CC | VS | GE | LE | LS),
+ /* 1 1 0 0 */ (NE | NC | CS | VS | LT | LE | LS),
+ /* 1 1 0 1 */ (EQ | NC | CS | VS | LT | LE | LS),
+ /* 1 1 1 0 */ (NE | NS | CS | VS | GE | GT | LS),
+ /* 1 1 1 1 */ (EQ | NS | CS | VS | GE | LE | LS),
+};
+
+/*
+ * Calculate what the PC will be after executing next instruction
+ */
+static unsigned find_nextpc(struct pt_regs *regs, int *flags)
+{
+ unsigned size;
+ s8 x8;
+ s16 x16;
+ s32 x32;
+ u8 opc, *pc, *sp, *next;
+
+ next = 0;
+ *flags = SINGLESTEP_PCREL;
+
+ pc = (u8 *) regs->pc;
+ sp = (u8 *) (regs + 1);
+ opc = *pc;
+
+ size = mn10300_insn_sizes[opc];
+ if (size > 0) {
+ next = pc + size;
+ } else {
+ switch (opc) {
+ /* Bxx (d8,PC) */
+ case 0xc0 ... 0xca:
+ x8 = 2;
+ if (cond_table[regs->epsw & 0xf] & (1 << (opc & 0xf)))
+ x8 = (s8)pc[1];
+ next = pc + x8;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* JMP (d16,PC) or CALL (d16,PC) */
+ case 0xcc:
+ case 0xcd:
+ READ_WORD16(pc + 1, &x16);
+ next = pc + x16;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* JMP (d32,PC) or CALL (d32,PC) */
+ case 0xdc:
+ case 0xdd:
+ READ_WORD32(pc + 1, &x32);
+ next = pc + x32;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* RETF */
+ case 0xde:
+ next = (u8 *)regs->mdr;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ /* RET */
+ case 0xdf:
+ sp += pc[2];
+ READ_WORD32(sp, &x32);
+ next = (u8 *)x32;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ case 0xf0:
+ next = pc + 2;
+ opc = pc[1];
+ if (opc >= 0xf0 && opc <= 0xf7) {
+ /* JMP (An) / CALLS (An) */
+ switch (opc & 3) {
+ case 0:
+ next = (u8 *)regs->a0;
+ break;
+ case 1:
+ next = (u8 *)regs->a1;
+ break;
+ case 2:
+ next = (u8 *)regs->a2;
+ break;
+ case 3:
+ next = (u8 *)regs->a3;
+ break;
+ }
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ } else if (opc == 0xfc) {
+ /* RETS */
+ READ_WORD32(sp, &x32);
+ next = (u8 *)x32;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ } else if (opc == 0xfd) {
+ /* RTI */
+ READ_WORD32(sp + 4, &x32);
+ next = (u8 *)x32;
+ *flags &= ~SINGLESTEP_PCREL;
+ *flags |= SINGLESTEP_BRANCH;
+ }
+ break;
+
+ /* potential 3-byte conditional branches */
+ case 0xf8:
+ next = pc + 3;
+ opc = pc[1];
+ if (opc >= 0xe8 && opc <= 0xeb &&
+ (cond_table[regs->epsw & 0xf] &
+ (1 << ((opc & 0xf) + 3)))
+ ) {
+ READ_BYTE(pc+2, &x8);
+ next = pc + x8;
+ *flags |= SINGLESTEP_BRANCH;
+ }
+ break;
+
+ case 0xfa:
+ if (pc[1] == 0xff) {
+ /* CALLS (d16,PC) */
+ READ_WORD16(pc + 2, &x16);
+ next = pc + x16;
+ } else
+ next = pc + 4;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+
+ case 0xfc:
+ x32 = 6;
+ if (pc[1] == 0xff) {
+ /* CALLS (d32,PC) */
+ READ_WORD32(pc + 2, &x32);
+ }
+ next = pc + x32;
+ *flags |= SINGLESTEP_BRANCH;
+ break;
+ /* LXX (d8,PC) */
+ /* SETLB - loads the next four bytes into the LIR reg */
+ case 0xd0 ... 0xda:
+ case 0xdb:
+ panic("Can't singlestep Lxx/SETLB\n");
+ break;
+ }
+ }
+ return (unsigned)next;
+
+}
+
+/*
+ * set up out of place singlestep of some branching instructions
+ */
+static unsigned __kprobes singlestep_branch_setup(struct pt_regs *regs)
+{
+ u8 opc, *pc, *sp, *next;
+
+ next = NULL;
+ pc = (u8 *) regs->pc;
+ sp = (u8 *) (regs + 1);
+
+ switch (pc[0]) {
+ case 0xc0 ... 0xca: /* Bxx (d8,PC) */
+ case 0xcc: /* JMP (d16,PC) */
+ case 0xdc: /* JMP (d32,PC) */
+ case 0xf8: /* Bxx (d8,PC) 3-byte version */
+ /* don't really need to do anything except cause trap */
+ next = pc;
+ break;
+
+ case 0xcd: /* CALL (d16,PC) */
+ pc[1] = 5;
+ pc[2] = 0;
+ next = pc + 5;
+ break;
+
+ case 0xdd: /* CALL (d32,PC) */
+ pc[1] = 7;
+ pc[2] = 0;
+ pc[3] = 0;
+ pc[4] = 0;
+ next = pc + 7;
+ break;
+
+ case 0xde: /* RETF */
+ next = pc + 3;
+ regs->mdr = (unsigned) next;
+ break;
+
+ case 0xdf: /* RET */
+ sp += pc[2];
+ next = pc + 3;
+ *(unsigned *)sp = (unsigned) next;
+ break;
+
+ case 0xf0:
+ next = pc + 2;
+ opc = pc[1];
+ if (opc >= 0xf0 && opc <= 0xf3) {
+ /* CALLS (An) */
+ /* use CALLS (d16,PC) to avoid mucking with An */
+ pc[0] = 0xfa;
+ pc[1] = 0xff;
+ pc[2] = 4;
+ pc[3] = 0;
+ next = pc + 4;
+ } else if (opc >= 0xf4 && opc <= 0xf7) {
+ /* JMP (An) */
+ next = pc;
+ } else if (opc == 0xfc) {
+ /* RETS */
+ next = pc + 2;
+ *(unsigned *) sp = (unsigned) next;
+ } else if (opc == 0xfd) {
+ /* RTI */
+ next = pc + 2;
+ *(unsigned *)(sp + 4) = (unsigned) next;
+ }
+ break;
+
+ case 0xfa: /* CALLS (d16,PC) */
+ pc[2] = 4;
+ pc[3] = 0;
+ next = pc + 4;
+ break;
+
+ case 0xfc: /* CALLS (d32,PC) */
+ pc[2] = 6;
+ pc[3] = 0;
+ pc[4] = 0;
+ pc[5] = 0;
+ next = pc + 6;
+ break;
+
+ case 0xd0 ... 0xda: /* LXX (d8,PC) */
+ case 0xdb: /* SETLB */
+ panic("Can't singlestep Lxx/SETLB\n");
+ }
+
+ return (unsigned) next;
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+ return 0;
+}
+
+void __kprobes arch_copy_kprobe(struct kprobe *p)
+{
+ memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE);
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ *p->addr = BREAKPOINT_INSTRUCTION;
+ flush_icache_range((unsigned long) p->addr,
+ (unsigned long) p->addr + sizeof(kprobe_opcode_t));
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+ mn10300_dcache_flush();
+ mn10300_icache_inv();
+}
+
+void arch_remove_kprobe(struct kprobe *p)
+{
+}
+
+static inline
+void __kprobes disarm_kprobe(struct kprobe *p, struct pt_regs *regs)
+{
+ *p->addr = p->opcode;
+ regs->pc = (unsigned long) p->addr;
+ mn10300_dcache_flush();
+ mn10300_icache_inv();
+}
+
+static inline
+void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+ unsigned long nextpc;
+
+ current_kprobe_orig_pc = regs->pc;
+ memcpy(current_kprobe_ss_buf, &p->ainsn.insn[0], MAX_INSN_SIZE);
+ regs->pc = (unsigned long) current_kprobe_ss_buf;
+
+ nextpc = find_nextpc(regs, ¤t_kprobe_ss_flags);
+ if (current_kprobe_ss_flags & SINGLESTEP_PCREL)
+ current_kprobe_next_pc =
+ current_kprobe_orig_pc + (nextpc - regs->pc);
+ else
+ current_kprobe_next_pc = nextpc;
+
+ /* branching instructions need special handling */
+ if (current_kprobe_ss_flags & SINGLESTEP_BRANCH)
+ nextpc = singlestep_branch_setup(regs);
+
+ current_kprobe_bp_addr = nextpc;
+
+ *(u8 *) nextpc = BREAKPOINT_INSTRUCTION;
+ mn10300_dcache_flush_range2((unsigned) current_kprobe_ss_buf,
+ sizeof(current_kprobe_ss_buf));
+ mn10300_icache_inv();
+}
+
+static inline int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *p;
+ int ret = 0;
+ unsigned int *addr = (unsigned int *) regs->pc;
+
+ /* We're in an interrupt, but this is clear and BUG()-safe. */
+ preempt_disable();
+
+ /* Check we're not actually recursing */
+ if (kprobe_running()) {
+ /* We *are* holding lock here, so this is safe.
+ Disarm the probe we just hit, and ignore it. */
+ p = get_kprobe(addr);
+ if (p) {
+ disarm_kprobe(p, regs);
+ ret = 1;
+ } else {
+ p = current_kprobe;
+ if (p->break_handler && p->break_handler(p, regs))
+ goto ss_probe;
+ }
+ /* If it's not ours, can't be delete race, (we hold lock). */
+ goto no_kprobe;
+ }
+
+ p = get_kprobe(addr);
+ if (!p) {
+ if (*addr != BREAKPOINT_INSTRUCTION) {
+ /* The breakpoint instruction was removed right after
+ * we hit it. Another cpu has removed either a
+ * probepoint or a debugger breakpoint at this address.
+ * In either case, no further handling of this
+ * interrupt is appropriate.
+ */
+ ret = 1;
+ }
+ /* Not one of ours: let kernel handle it */
+ goto no_kprobe;
+ }
+
+ kprobe_status = KPROBE_HIT_ACTIVE;
+ current_kprobe = p;
+ if (p->pre_handler(p, regs)) {
+ /* handler has already set things up, so skip ss setup */
+ return 1;
+ }
+
+ss_probe:
+ prepare_singlestep(p, regs);
+ kprobe_status = KPROBE_HIT_SS;
+ return 1;
+
+no_kprobe:
+ preempt_enable_no_resched();
+ return ret;
+}
+
+/*
+ * Called after single-stepping. p->addr is the address of the
+ * instruction whose first byte has been replaced by the "breakpoint"
+ * instruction. To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction. The address of this
+ * copy is p->ainsn.insn.
+ */
+static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
+{
+ /* we may need to fixup regs/stack after singlestepping a call insn */
+ if (current_kprobe_ss_flags & SINGLESTEP_BRANCH) {
+ regs->pc = current_kprobe_orig_pc;
+ switch (p->ainsn.insn[0]) {
+ case 0xcd: /* CALL (d16,PC) */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 5;
+ break;
+ case 0xdd: /* CALL (d32,PC) */
+ /* fixup mdr and return address on stack */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 7;
+ break;
+ case 0xf0:
+ if (p->ainsn.insn[1] >= 0xf0 &&
+ p->ainsn.insn[1] <= 0xf3) {
+ /* CALLS (An) */
+ /* fixup MDR and return address on stack */
+ regs->mdr = regs->pc + 2;
+ *(unsigned *) regs->sp = regs->mdr;
+ }
+ break;
+
+ case 0xfa: /* CALLS (d16,PC) */
+ /* fixup MDR and return address on stack */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 4;
+ break;
+
+ case 0xfc: /* CALLS (d32,PC) */
+ /* fixup MDR and return address on stack */
+ *(unsigned *) regs->sp = regs->mdr = regs->pc + 6;
+ break;
+ }
+ }
+
+ regs->pc = current_kprobe_next_pc;
+ current_kprobe_bp_addr = 0;
+}
+
+static inline int __kprobes post_kprobe_handler(struct pt_regs *regs)
+{
+ if (!kprobe_running())
+ return 0;
+
+ if (current_kprobe->post_handler)
+ current_kprobe->post_handler(current_kprobe, regs, 0);
+
+ resume_execution(current_kprobe, regs);
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ return 1;
+}
+
+/* Interrupts disabled, kprobe_lock held. */
+static inline
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+ if (current_kprobe->fault_handler &&
+ current_kprobe->fault_handler(current_kprobe, regs, trapnr))
+ return 1;
+
+ if (kprobe_status & KPROBE_HIT_SS) {
+ resume_execution(current_kprobe, regs);
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ }
+ return 0;
+}
+
+/*
+ * Wrapper routine to for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ struct die_args *args = data;
+
+ switch (val) {
+ case DIE_BREAKPOINT:
+ if (current_kprobe_bp_addr != args->regs->pc) {
+ if (kprobe_handler(args->regs))
+ return NOTIFY_STOP;
+ } else {
+ if (post_kprobe_handler(args->regs))
+ return NOTIFY_STOP;
+ }
+ break;
+ case DIE_GPF:
+ if (kprobe_running() &&
+ kprobe_fault_handler(args->regs, args->trapnr))
+ return NOTIFY_STOP;
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+/* Jprobes support. */
+static struct pt_regs jprobe_saved_regs;
+static struct pt_regs *jprobe_saved_regs_location;
+static kprobe_opcode_t jprobe_saved_stack[MAX_STACK_SIZE];
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+ jprobe_saved_regs_location = regs;
+ memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs));
+
+ /* Save a whole stack frame, this gets arguments
+ * pushed onto the stack after using up all the
+ * arg registers.
+ */
+ memcpy(&jprobe_saved_stack, regs + 1, sizeof(jprobe_saved_stack));
+
+ /* setup return addr to the jprobe handler routine */
+ regs->pc = (unsigned long) jp->entry;
+ return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+ void *orig_sp = jprobe_saved_regs_location + 1;
+
+ preempt_enable_no_resched();
+ asm volatile(" mov %0,sp\n"
+ ".globl jprobe_return_bp_addr\n"
+ "jprobe_return_bp_addr:\n\t"
+ " .byte 0xff\n"
+ : : "d" (orig_sp));
+}
+
+extern void jprobe_return_bp_addr(void);
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ u8 *addr = (u8 *) regs->pc;
+
+ if (addr == (u8 *) jprobe_return_bp_addr) {
+ if (jprobe_saved_regs_location != regs) {
+ printk(KERN_ERR"JPROBE:"
+ " Current regs (%p) does not match saved regs"
+ " (%p).\n",
+ regs, jprobe_saved_regs_location);
+ BUG();
+ }
+
+ /* Restore old register state.
+ */
+ memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs));
+
+ memcpy(regs + 1, &jprobe_saved_stack,
+ sizeof(jprobe_saved_stack));
+ return 1;
+ }
+ return 0;
+}
+
+int __init arch_init_kprobes(void)
+{
+ return 0;
+}
--- /dev/null
+/* MN10300 Kernel thread trampoline function
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+ .text
+
+###############################################################################
+#
+# kernel_thread_helper - trampoline for kernel_thread()
+#
+# On entry:
+# A2 = address of function to call
+# D2 = function argument
+#
+###############################################################################
+ .globl kernel_thread_helper
+ .type kernel_thread_helper,@function
+kernel_thread_helper:
+ mov do_exit,d1
+ mov d1,(sp)
+ mov d1,mdr
+ mov d2,d0
+ jmp (a2)
+
+ .size kernel_thread_helper,.-kernel_thread_helper
--- /dev/null
+/* Debugging stuff for the MN10300-based processors
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <asm/serial-regs.h>
+
+#undef MN10300_CONSOLE_ON_SERIO
+
+/*
+ * write a string directly through one of the serial ports on-board the MN10300
+ */
+#ifdef MN10300_CONSOLE_ON_SERIO
+void debug_to_serial_mnser(const char *p, int n)
+{
+ char ch;
+
+ for (; n > 0; n--) {
+ ch = *p++;
+
+#if MN10300_CONSOLE_ON_SERIO == 0
+ while (SC0STR & (SC01STR_TBF)) continue;
+ SC0TXB = ch;
+ while (SC0STR & (SC01STR_TBF)) continue;
+ if (ch == 0x0a) {
+ SC0TXB = 0x0d;
+ while (SC0STR & (SC01STR_TBF)) continue;
+ }
+
+#elif MN10300_CONSOLE_ON_SERIO == 1
+ while (SC1STR & (SC01STR_TBF)) continue;
+ SC1TXB = ch;
+ while (SC1STR & (SC01STR_TBF)) continue;
+ if (ch == 0x0a) {
+ SC1TXB = 0x0d;
+ while (SC1STR & (SC01STR_TBF)) continue;
+ }
+
+#elif MN10300_CONSOLE_ON_SERIO == 2
+ while (SC2STR & (SC2STR_TBF)) continue;
+ SC2TXB = ch;
+ while (SC2STR & (SC2STR_TBF)) continue;
+ if (ch == 0x0a) {
+ SC2TXB = 0x0d;
+ while (SC2STR & (SC2STR_TBF)) continue;
+ }
+
+#endif
+ }
+}
+#endif
+
--- /dev/null
+###############################################################################
+#
+# Virtual DMA driver for MN10300 serial ports
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/smp.h>
+#include <asm/cpu-regs.h>
+#include <asm/frame.inc>
+#include <asm/timer-regs.h>
+#include <asm/proc/cache.h>
+#include <asm/unit/timex.h>
+#include "mn10300-serial.h"
+
+#define SCxCTR 0x00
+#define SCxICR 0x04
+#define SCxTXB 0x08
+#define SCxRXB 0x09
+#define SCxSTR 0x0c
+#define SCxTIM 0x0d
+
+ .text
+
+###############################################################################
+#
+# serial port interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+#
+###############################################################################
+ .balign L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_interrupt)
+ or EPSW_IE,psw # permit overriding by
+ # debugging interrupts
+ movm [d2,d3,a2,a3,exreg0],(sp)
+
+ movhu (IAGR),a2 # see if which interrupt is
+ # pending
+ and IAGR_GN,a2
+ add a2,a2
+ add mn10300_serial_int_tbl,a2
+
+ mov (a2+),a3
+ mov (__iobase,a3),e2
+ mov (a2),a2
+ jmp (a2)
+
+###############################################################################
+#
+# serial port receive interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - stores data/status byte pairs in the ring buffer
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+# on entry:
+# A3 struct mn10300_serial_port *
+# E2 I/O port base
+#
+###############################################################################
+ENTRY(mn10300_serial_vdma_rx_handler)
+ mov (__rx_icr,a3),e3
+ mov GxICR_DETECT,d2
+ movbu d2,(e3) # ACK the interrupt
+ movhu (e3),d2 # flush
+
+ mov (__rx_inp,a3),d3
+ mov d3,a2
+ add 2,d3
+ and MNSC_BUFFER_SIZE-1,d3
+ mov (__rx_outp,a3),d2
+ cmp d3,d2
+ beq mnsc_vdma_rx_overflow
+
+ mov (__rx_buffer,a3),d2
+ add d2,a2
+ movhu (SCxSTR,e2),d2
+ movbu d2,(1,a2)
+ movbu (SCxRXB,e2),d2
+ movbu d2,(a2)
+ mov d3,(__rx_inp,a3)
+ bset MNSCx_RX_AVAIL,(__intr_flags,a3)
+
+mnsc_vdma_rx_done:
+ mov (__tm_icr,a3),a2
+ mov GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+ movhu d2,(a2) # request a slow interrupt
+ movhu (a2),d2 # flush
+
+ movm (sp),[d2,d3,a2,a3,exreg0]
+ rti
+
+mnsc_vdma_rx_overflow:
+ bset MNSCx_RX_OVERF,(__intr_flags,a3)
+ bra mnsc_vdma_rx_done
+
+###############################################################################
+#
+# serial port transmit interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - retrieves data bytes from the ring buffer and passes them to the serial port
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+# A3 struct mn10300_serial_port *
+# E2 I/O port base
+#
+###############################################################################
+ .balign L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_tx_handler)
+ mov (__tx_icr,a3),e3
+ mov GxICR_DETECT,d2
+ movbu d2,(e3) # ACK the interrupt
+ movhu (e3),d2 # flush
+
+ btst 0x01,(__tx_break,a3) # handle transmit break request
+ bne mnsc_vdma_tx_break
+
+ movbu (SCxSTR,e2),d2 # don't try and transmit a char if the
+ # buffer is not empty
+ btst SC01STR_TBF,d2 # (may have tried to jumpstart)
+ bne mnsc_vdma_tx_noint
+
+ movbu (__tx_xchar,a3),d2 # handle hi-pri XON/XOFF
+ or d2,d2
+ bne mnsc_vdma_tx_xchar
+
+ mov (__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+ mov (__xmit_tail,a2),d3
+ mov (__xmit_head,a2),d2
+ cmp d3,d2
+ beq mnsc_vdma_tx_empty
+
+ mov (__xmit_buffer,a2),d2 # get a char from the buffer and
+ # transmit it
+ movbu (d3,d2),d2
+ movbu d2,(SCxTXB,e2) # Tx
+
+ inc d3 # advance the buffer pointer
+ and __UART_XMIT_SIZE-1,d3
+ mov (__xmit_head,a2),d2
+ mov d3,(__xmit_tail,a2)
+
+ sub d3,d2 # see if we've written everything
+ beq mnsc_vdma_tx_empty
+
+ and __UART_XMIT_SIZE-1,d2 # see if we just made a hole
+ cmp __UART_XMIT_SIZE-2,d2
+ beq mnsc_vdma_tx_made_hole
+
+mnsc_vdma_tx_done:
+ mov (__tm_icr,a3),a2
+ mov GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+ movhu d2,(a2) # request a slow interrupt
+ movhu (a2),d2 # flush
+
+mnsc_vdma_tx_noint:
+ movm (sp),[d2,d3,a2,a3,exreg0]
+ rti
+
+mnsc_vdma_tx_empty:
+ mov +(GxICR_LEVEL_1|GxICR_DETECT),d2
+ movhu d2,(e3) # disable the interrupt
+ movhu (e3),d2 # flush
+
+ bset MNSCx_TX_EMPTY,(__intr_flags,a3)
+ bra mnsc_vdma_tx_done
+
+mnsc_vdma_tx_break:
+ movhu (SCxCTR,e2),d2 # turn on break mode
+ or SC01CTR_BKE,d2
+ movhu d2,(SCxCTR,e2)
+ mov +(GxICR_LEVEL_1|GxICR_DETECT),d2
+ movhu d2,(e3) # disable transmit interrupts on this
+ # channel
+ movhu (e3),d2 # flush
+ bra mnsc_vdma_tx_noint
+
+mnsc_vdma_tx_xchar:
+ bclr 0xff,(__tx_xchar,a3)
+ movbu d2,(SCxTXB,e2)
+ bra mnsc_vdma_tx_done
+
+mnsc_vdma_tx_made_hole:
+ bset MNSCx_TX_SPACE,(__intr_flags,a3)
+ bra mnsc_vdma_tx_done
--- /dev/null
+/* MN10300 On-chip serial port UART driver
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+static const char serial_name[] = "MN10300 Serial driver";
+static const char serial_version[] = "mn10300_serial-1.0";
+static const char serial_revdate[] = "2007-11-06";
+
+#if defined(CONFIG_MN10300_TTYSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/circ_buf.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/bitops.h>
+#include <asm/serial-regs.h>
+#include <asm/unit/timex.h>
+#include "mn10300-serial.h"
+
+static inline __attribute__((format(printf, 1, 2)))
+void no_printk(const char *fmt, ...)
+{
+}
+
+#define kenter(FMT, ...) \
+ printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
+#define _enter(FMT, ...) \
+ no_printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
+#define kdebug(FMT, ...) \
+ printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__)
+#define _debug(FMT, ...) \
+ no_printk(KERN_DEBUG "--- " FMT "\n", ##__VA_ARGS__)
+#define kproto(FMT, ...) \
+ printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
+#define _proto(FMT, ...) \
+ no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
+
+#define NR_UARTS 3
+
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+static void mn10300_serial_console_write(struct console *co,
+ const char *s, unsigned count);
+static int __init mn10300_serial_console_setup(struct console *co,
+ char *options);
+
+static struct uart_driver mn10300_serial_driver;
+static struct console mn10300_serial_console = {
+ .name = "ttySM",
+ .write = mn10300_serial_console_write,
+ .device = uart_console_device,
+ .setup = mn10300_serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &mn10300_serial_driver,
+};
+#endif
+
+static struct uart_driver mn10300_serial_driver = {
+ .owner = NULL,
+ .driver_name = "mn10300-serial",
+ .dev_name = "ttySM",
+ .major = TTY_MAJOR,
+ .minor = 128,
+ .nr = NR_UARTS,
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+ .cons = &mn10300_serial_console,
+#endif
+};
+
+static unsigned int mn10300_serial_tx_empty(struct uart_port *);
+static void mn10300_serial_set_mctrl(struct uart_port *, unsigned int mctrl);
+static unsigned int mn10300_serial_get_mctrl(struct uart_port *);
+static void mn10300_serial_stop_tx(struct uart_port *);
+static void mn10300_serial_start_tx(struct uart_port *);
+static void mn10300_serial_send_xchar(struct uart_port *, char ch);
+static void mn10300_serial_stop_rx(struct uart_port *);
+static void mn10300_serial_enable_ms(struct uart_port *);
+static void mn10300_serial_break_ctl(struct uart_port *, int ctl);
+static int mn10300_serial_startup(struct uart_port *);
+static void mn10300_serial_shutdown(struct uart_port *);
+static void mn10300_serial_set_termios(struct uart_port *,
+ struct ktermios *new,
+ struct ktermios *old);
+static const char *mn10300_serial_type(struct uart_port *);
+static void mn10300_serial_release_port(struct uart_port *);
+static int mn10300_serial_request_port(struct uart_port *);
+static void mn10300_serial_config_port(struct uart_port *, int);
+static int mn10300_serial_verify_port(struct uart_port *,
+ struct serial_struct *);
+
+static const struct uart_ops mn10300_serial_ops = {
+ .tx_empty = mn10300_serial_tx_empty,
+ .set_mctrl = mn10300_serial_set_mctrl,
+ .get_mctrl = mn10300_serial_get_mctrl,
+ .stop_tx = mn10300_serial_stop_tx,
+ .start_tx = mn10300_serial_start_tx,
+ .send_xchar = mn10300_serial_send_xchar,
+ .stop_rx = mn10300_serial_stop_rx,
+ .enable_ms = mn10300_serial_enable_ms,
+ .break_ctl = mn10300_serial_break_ctl,
+ .startup = mn10300_serial_startup,
+ .shutdown = mn10300_serial_shutdown,
+ .set_termios = mn10300_serial_set_termios,
+ .type = mn10300_serial_type,
+ .release_port = mn10300_serial_release_port,
+ .request_port = mn10300_serial_request_port,
+ .config_port = mn10300_serial_config_port,
+ .verify_port = mn10300_serial_verify_port,
+};
+
+static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id);
+
+/*
+ * the first on-chip serial port: ttySM0 (aka SIF0)
+ */
+#ifdef CONFIG_MN10300_TTYSM0
+struct mn10300_serial_port mn10300_serial_port_sif0 = {
+ .uart.ops = &mn10300_serial_ops,
+ .uart.membase = (void __iomem *) &SC0CTR,
+ .uart.mapbase = (unsigned long) &SC0CTR,
+ .uart.iotype = UPIO_MEM,
+ .uart.irq = 0,
+ .uart.uartclk = 0, /* MN10300_IOCLK, */
+ .uart.fifosize = 1,
+ .uart.flags = UPF_BOOT_AUTOCONF,
+ .uart.line = 0,
+ .uart.type = PORT_MN10300,
+ .uart.lock =
+ __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif0.uart.lock),
+ .name = "ttySM0",
+ ._iobase = &SC0CTR,
+ ._control = &SC0CTR,
+ ._status = (volatile u8 *) &SC0STR,
+ ._intr = &SC0ICR,
+ ._rxb = &SC0RXB,
+ ._txb = &SC0TXB,
+ .rx_name = "ttySM0/Rx",
+ .tx_name = "ttySM0/Tx",
+#ifdef CONFIG_MN10300_TTYSM0_TIMER8
+ .tm_name = "ttySM0/Timer8",
+ ._tmxmd = &TM8MD,
+ ._tmxbr = &TM8BR,
+ ._tmicr = &TM8ICR,
+ .tm_irq = TM8IRQ,
+ .div_timer = MNSCx_DIV_TIMER_16BIT,
+#else /* CONFIG_MN10300_TTYSM0_TIMER2 */
+ .tm_name = "ttySM0/Timer2",
+ ._tmxmd = &TM2MD,
+ ._tmxbr = (volatile u16 *) &TM2BR,
+ ._tmicr = &TM2ICR,
+ .tm_irq = TM2IRQ,
+ .div_timer = MNSCx_DIV_TIMER_8BIT,
+#endif
+ .rx_irq = SC0RXIRQ,
+ .tx_irq = SC0TXIRQ,
+ .rx_icr = &GxICR(SC0RXIRQ),
+ .tx_icr = &GxICR(SC0TXIRQ),
+ .clock_src = MNSCx_CLOCK_SRC_IOCLK,
+ .options = 0,
+#ifdef CONFIG_GDBSTUB_ON_TTYSM0
+ .gdbstub = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM0 */
+
+/*
+ * the second on-chip serial port: ttySM1 (aka SIF1)
+ */
+#ifdef CONFIG_MN10300_TTYSM1
+struct mn10300_serial_port mn10300_serial_port_sif1 = {
+ .uart.ops = &mn10300_serial_ops,
+ .uart.membase = (void __iomem *) &SC1CTR,
+ .uart.mapbase = (unsigned long) &SC1CTR,
+ .uart.iotype = UPIO_MEM,
+ .uart.irq = 0,
+ .uart.uartclk = 0, /* MN10300_IOCLK, */
+ .uart.fifosize = 1,
+ .uart.flags = UPF_BOOT_AUTOCONF,
+ .uart.line = 1,
+ .uart.type = PORT_MN10300,
+ .uart.lock =
+ __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif1.uart.lock),
+ .name = "ttySM1",
+ ._iobase = &SC1CTR,
+ ._control = &SC1CTR,
+ ._status = (volatile u8 *) &SC1STR,
+ ._intr = &SC1ICR,
+ ._rxb = &SC1RXB,
+ ._txb = &SC1TXB,
+ .rx_name = "ttySM1/Rx",
+ .tx_name = "ttySM1/Tx",
+#ifdef CONFIG_MN10300_TTYSM1_TIMER9
+ .tm_name = "ttySM1/Timer9",
+ ._tmxmd = &TM9MD,
+ ._tmxbr = &TM9BR,
+ ._tmicr = &TM9ICR,
+ .tm_irq = TM9IRQ,
+ .div_timer = MNSCx_DIV_TIMER_16BIT,
+#else /* CONFIG_MN10300_TTYSM1_TIMER3 */
+ .tm_name = "ttySM1/Timer3",
+ ._tmxmd = &TM3MD,
+ ._tmxbr = (volatile u16 *) &TM3BR,
+ ._tmicr = &TM3ICR,
+ .tm_irq = TM3IRQ,
+ .div_timer = MNSCx_DIV_TIMER_8BIT,
+#endif
+ .rx_irq = SC1RXIRQ,
+ .tx_irq = SC1TXIRQ,
+ .rx_icr = &GxICR(SC1RXIRQ),
+ .tx_icr = &GxICR(SC1TXIRQ),
+ .clock_src = MNSCx_CLOCK_SRC_IOCLK,
+ .options = 0,
+#ifdef CONFIG_GDBSTUB_ON_TTYSM1
+ .gdbstub = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM1 */
+
+/*
+ * the third on-chip serial port: ttySM2 (aka SIF2)
+ */
+#ifdef CONFIG_MN10300_TTYSM2
+struct mn10300_serial_port mn10300_serial_port_sif2 = {
+ .uart.ops = &mn10300_serial_ops,
+ .uart.membase = (void __iomem *) &SC2CTR,
+ .uart.mapbase = (unsigned long) &SC2CTR,
+ .uart.iotype = UPIO_MEM,
+ .uart.irq = 0,
+ .uart.uartclk = 0, /* MN10300_IOCLK, */
+ .uart.fifosize = 1,
+ .uart.flags = UPF_BOOT_AUTOCONF,
+ .uart.line = 2,
+#ifdef CONFIG_MN10300_TTYSM2_CTS
+ .uart.type = PORT_MN10300_CTS,
+#else
+ .uart.type = PORT_MN10300,
+#endif
+ .uart.lock =
+ __SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
+ .name = "ttySM2",
+ .rx_name = "ttySM2/Rx",
+ .tx_name = "ttySM2/Tx",
+ .tm_name = "ttySM2/Timer10",
+ ._iobase = &SC2CTR,
+ ._control = &SC2CTR,
+ ._status = &SC2STR,
+ ._intr = &SC2ICR,
+ ._rxb = &SC2RXB,
+ ._txb = &SC2TXB,
+ ._tmxmd = &TM10MD,
+ ._tmxbr = &TM10BR,
+ ._tmicr = &TM10ICR,
+ .tm_irq = TM10IRQ,
+ .div_timer = MNSCx_DIV_TIMER_16BIT,
+ .rx_irq = SC2RXIRQ,
+ .tx_irq = SC2TXIRQ,
+ .rx_icr = &GxICR(SC2RXIRQ),
+ .tx_icr = &GxICR(SC2TXIRQ),
+ .clock_src = MNSCx_CLOCK_SRC_IOCLK,
+#ifdef CONFIG_MN10300_TTYSM2_CTS
+ .options = MNSCx_OPT_CTS,
+#else
+ .options = 0,
+#endif
+#ifdef CONFIG_GDBSTUB_ON_TTYSM2
+ .gdbstub = 1,
+#endif
+};
+#endif /* CONFIG_MN10300_TTYSM2 */
+
+
+/*
+ * list of available serial ports
+ */
+struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = {
+#ifdef CONFIG_MN10300_TTYSM0
+ [0] = &mn10300_serial_port_sif0,
+#endif
+#ifdef CONFIG_MN10300_TTYSM1
+ [1] = &mn10300_serial_port_sif1,
+#endif
+#ifdef CONFIG_MN10300_TTYSM2
+ [2] = &mn10300_serial_port_sif2,
+#endif
+ [NR_UARTS] = NULL,
+};
+
+
+/*
+ * we abuse the serial ports' baud timers' interrupt lines to get the ability
+ * to deliver interrupts to userspace as we use the ports' interrupt lines to
+ * do virtual DMA on account of the ports having no hardware FIFOs
+ *
+ * we can generate an interrupt manually in the assembly stubs by writing to
+ * the enable and detect bits in the interrupt control register, so all we need
+ * to do here is disable the interrupt line
+ *
+ * note that we can't just leave the line enabled as the baud rate timer *also*
+ * generates interrupts
+ */
+static void mn10300_serial_mask_ack(unsigned int irq)
+{
+ u16 tmp;
+ GxICR(irq) = GxICR_LEVEL_6;
+ tmp = GxICR(irq); /* flush write buffer */
+}
+
+static void mn10300_serial_nop(unsigned int irq)
+{
+}
+
+static struct irq_chip mn10300_serial_pic = {
+ .name = "mnserial",
+ .ack = mn10300_serial_mask_ack,
+ .mask = mn10300_serial_mask_ack,
+ .mask_ack = mn10300_serial_mask_ack,
+ .unmask = mn10300_serial_nop,
+ .end = mn10300_serial_nop,
+};
+
+
+/*
+ * serial virtual DMA interrupt jump table
+ */
+struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS];
+
+static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port)
+{
+ u16 x;
+ *port->tx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+ x = *port->tx_icr;
+}
+
+static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port)
+{
+ u16 x;
+ *port->tx_icr = GxICR_LEVEL_1 | GxICR_ENABLE;
+ x = *port->tx_icr;
+}
+
+static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port)
+{
+ u16 x;
+ *port->rx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+ x = *port->rx_icr;
+}
+
+/*
+ * multi-bit equivalent of test_and_clear_bit()
+ */
+static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
+{
+ u32 epsw;
+ asm volatile(" bclr %1,(%2) \n"
+ " mov epsw,%0 \n"
+ : "=d"(epsw) : "d"(mask), "a"(ptr));
+ return !(epsw & EPSW_FLAG_Z);
+}
+
+/*
+ * receive chars from the ring buffer for this serial port
+ * - must do break detection here (not done in the UART)
+ */
+static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
+{
+ struct uart_icount *icount = &port->uart.icount;
+ struct tty_struct *tty = port->uart.info->tty;
+ unsigned ix;
+ int count;
+ u8 st, ch, push, status, overrun;
+
+ _enter("%s", port->name);
+
+ push = 0;
+
+ count = CIRC_CNT(port->rx_inp, port->rx_outp, MNSC_BUFFER_SIZE);
+ count = tty_buffer_request_room(tty, count);
+ if (count == 0) {
+ if (!tty->low_latency)
+ tty_flip_buffer_push(tty);
+ return;
+ }
+
+try_again:
+ /* pull chars out of the hat */
+ ix = port->rx_outp;
+ if (ix == port->rx_inp) {
+ if (push && !tty->low_latency)
+ tty_flip_buffer_push(tty);
+ return;
+ }
+
+ ch = port->rx_buffer[ix++];
+ st = port->rx_buffer[ix++];
+ smp_rmb();
+ port->rx_outp = ix & (MNSC_BUFFER_SIZE - 1);
+ port->uart.icount.rx++;
+
+ st &= SC01STR_FEF | SC01STR_PEF | SC01STR_OEF;
+ status = 0;
+ overrun = 0;
+
+ /* the UART doesn't detect BREAK, so we have to do that ourselves
+ * - it starts as a framing error on a NUL character
+ * - then we count another two NUL characters before issuing TTY_BREAK
+ * - then we end on a normal char or one that has all the bottom bits
+ * zero and the top bits set
+ */
+ switch (port->rx_brk) {
+ case 0:
+ /* not breaking at the moment */
+ break;
+
+ case 1:
+ if (st & SC01STR_FEF && ch == 0) {
+ port->rx_brk = 2;
+ goto try_again;
+ }
+ goto not_break;
+
+ case 2:
+ if (st & SC01STR_FEF && ch == 0) {
+ port->rx_brk = 3;
+ _proto("Rx Break Detected");
+ icount->brk++;
+ if (uart_handle_break(&port->uart))
+ goto ignore_char;
+ status |= 1 << TTY_BREAK;
+ goto insert;
+ }
+ goto not_break;
+
+ default:
+ if (st & (SC01STR_FEF | SC01STR_PEF | SC01STR_OEF))
+ goto try_again; /* still breaking */
+
+ port->rx_brk = 0; /* end of the break */
+
+ switch (ch) {
+ case 0xFF:
+ case 0xFE:
+ case 0xFC:
+ case 0xF8:
+ case 0xF0:
+ case 0xE0:
+ case 0xC0:
+ case 0x80:
+ case 0x00:
+ /* discard char at probable break end */
+ goto try_again;
+ }
+ break;
+ }
+
+process_errors:
+ /* handle framing error */
+ if (st & SC01STR_FEF) {
+ if (ch == 0) {
+ /* framing error with NUL char is probably a BREAK */
+ port->rx_brk = 1;
+ goto try_again;
+ }
+
+ _proto("Rx Framing Error");
+ icount->frame++;
+ status |= 1 << TTY_FRAME;
+ }
+
+ /* handle parity error */
+ if (st & SC01STR_PEF) {
+ _proto("Rx Parity Error");
+ icount->parity++;
+ status = TTY_PARITY;
+ }
+
+ /* handle normal char */
+ if (status == 0) {
+ if (uart_handle_sysrq_char(&port->uart, ch))
+ goto ignore_char;
+ status = (1 << TTY_NORMAL);
+ }
+
+ /* handle overrun error */
+ if (st & SC01STR_OEF) {
+ if (port->rx_brk)
+ goto try_again;
+
+ _proto("Rx Overrun Error");
+ icount->overrun++;
+ overrun = 1;
+ }
+
+insert:
+ status &= port->uart.read_status_mask;
+
+ if (!overrun && !(status & port->uart.ignore_status_mask)) {
+ int flag;
+
+ if (status & (1 << TTY_BREAK))
+ flag = TTY_BREAK;
+ else if (status & (1 << TTY_PARITY))
+ flag = TTY_PARITY;
+ else if (status & (1 << TTY_FRAME))
+ flag = TTY_FRAME;
+ else
+ flag = TTY_NORMAL;
+
+ tty_insert_flip_char(tty, ch, flag);
+ }
+
+ /* overrun is special, since it's reported immediately, and doesn't
+ * affect the current character
+ */
+ if (overrun)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ count--;
+ if (count <= 0) {
+ if (!tty->low_latency)
+ tty_flip_buffer_push(tty);
+ return;
+ }
+
+ignore_char:
+ push = 1;
+ goto try_again;
+
+not_break:
+ port->rx_brk = 0;
+ goto process_errors;
+}
+
+/*
+ * handle an interrupt from the serial transmission "virtual DMA" driver
+ * - note: the interrupt routine will disable its own interrupts when the Tx
+ * buffer is empty
+ */
+static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
+{
+ _enter("%s", port->name);
+
+ if (uart_tx_stopped(&port->uart) ||
+ uart_circ_empty(&port->uart.info->xmit))
+ mn10300_serial_dis_tx_intr(port);
+
+ if (uart_circ_chars_pending(&port->uart.info->xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&port->uart);
+}
+
+/*
+ * deal with a change in the status of the CTS line
+ */
+static void mn10300_serial_cts_changed(struct mn10300_serial_port *port, u8 st)
+{
+ u16 ctr;
+
+ port->tx_cts = st;
+ port->uart.icount.cts++;
+
+ /* flip the CTS state selector flag to interrupt when it changes
+ * back */
+ ctr = *port->_control;
+ ctr ^= SC2CTR_TWS;
+ *port->_control = ctr;
+
+ uart_handle_cts_change(&port->uart, st & SC2STR_CTS);
+ wake_up_interruptible(&port->uart.info->delta_msr_wait);
+}
+
+/*
+ * handle a virtual interrupt generated by the lower level "virtual DMA"
+ * routines (irq is the baud timer interrupt)
+ */
+static irqreturn_t mn10300_serial_interrupt(int irq, void *dev_id)
+{
+ struct mn10300_serial_port *port = dev_id;
+ u8 st;
+
+ spin_lock(&port->uart.lock);
+
+ if (port->intr_flags) {
+ _debug("INT %s: %x", port->name, port->intr_flags);
+
+ if (mask_test_and_clear(&port->intr_flags, MNSCx_RX_AVAIL))
+ mn10300_serial_receive_interrupt(port);
+
+ if (mask_test_and_clear(&port->intr_flags,
+ MNSCx_TX_SPACE | MNSCx_TX_EMPTY))
+ mn10300_serial_transmit_interrupt(port);
+ }
+
+ /* the only modem control line amongst the whole lot is CTS on
+ * serial port 2 */
+ if (port->type == PORT_MN10300_CTS) {
+ st = *port->_status;
+ if ((port->tx_cts ^ st) & SC2STR_CTS)
+ mn10300_serial_cts_changed(port, st);
+ }
+
+ spin_unlock(&port->uart.lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * return indication of whether the hardware transmit buffer is empty
+ */
+static unsigned int mn10300_serial_tx_empty(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ return (*port->_status & (SC01STR_TXF | SC01STR_TBF)) ?
+ 0 : TIOCSER_TEMT;
+}
+
+/*
+ * set the modem control lines (we don't have any)
+ */
+static void mn10300_serial_set_mctrl(struct uart_port *_port,
+ unsigned int mctrl)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%x", port->name, mctrl);
+}
+
+/*
+ * get the modem control line statuses
+ */
+static unsigned int mn10300_serial_get_mctrl(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ if (port->type == PORT_MN10300_CTS && !(*port->_status & SC2STR_CTS))
+ return TIOCM_CAR | TIOCM_DSR;
+
+ return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR;
+}
+
+/*
+ * stop transmitting characters
+ */
+static void mn10300_serial_stop_tx(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ /* disable the virtual DMA */
+ mn10300_serial_dis_tx_intr(port);
+}
+
+/*
+ * start transmitting characters
+ * - jump-start transmission if it has stalled
+ * - enable the serial Tx interrupt (used by the virtual DMA controller)
+ * - force an interrupt to happen if necessary
+ */
+static void mn10300_serial_start_tx(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ u16 x;
+
+ _enter("%s{%lu}",
+ port->name,
+ CIRC_CNT(&port->uart.info->xmit.head,
+ &port->uart.info->xmit.tail,
+ UART_XMIT_SIZE));
+
+ /* kick the virtual DMA controller */
+ x = *port->tx_icr;
+ x |= GxICR_ENABLE;
+
+ if (*port->_status & SC01STR_TBF)
+ x &= ~(GxICR_REQUEST | GxICR_DETECT);
+ else
+ x |= GxICR_REQUEST | GxICR_DETECT;
+
+ _debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx",
+ *port->_control, *port->_intr, *port->_status,
+ *port->_tmxmd, *port->_tmxbr, *port->tx_icr);
+
+ *port->tx_icr = x;
+ x = *port->tx_icr;
+}
+
+/*
+ * transmit a high-priority XON/XOFF character
+ */
+static void mn10300_serial_send_xchar(struct uart_port *_port, char ch)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%02x", port->name, ch);
+
+ if (likely(port->gdbstub)) {
+ port->tx_xchar = ch;
+ if (ch)
+ mn10300_serial_en_tx_intr(port);
+ }
+}
+
+/*
+ * stop receiving characters
+ * - called whilst the port is being closed
+ */
+static void mn10300_serial_stop_rx(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ u16 ctr;
+
+ _enter("%s", port->name);
+
+ ctr = *port->_control;
+ ctr &= ~SC01CTR_RXE;
+ *port->_control = ctr;
+
+ mn10300_serial_dis_rx_intr(port);
+}
+
+/*
+ * enable modem status interrupts
+ */
+static void mn10300_serial_enable_ms(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ u16 ctr, cts;
+
+ _enter("%s", port->name);
+
+ if (port->type == PORT_MN10300_CTS) {
+ /* want to interrupt when CTS goes low if CTS is now high and
+ * vice versa
+ */
+ port->tx_cts = *port->_status;
+
+ cts = (port->tx_cts & SC2STR_CTS) ?
+ SC2CTR_TWE : SC2CTR_TWE | SC2CTR_TWS;
+
+ ctr = *port->_control;
+ ctr &= ~SC2CTR_TWS;
+ ctr |= cts;
+ *port->_control = ctr;
+
+ mn10300_serial_en_tx_intr(port);
+ }
+}
+
+/*
+ * transmit or cease transmitting a break signal
+ */
+static void mn10300_serial_break_ctl(struct uart_port *_port, int ctl)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%d", port->name, ctl);
+
+ if (ctl) {
+ /* tell the virtual DMA handler to assert BREAK */
+ port->tx_break = 1;
+ mn10300_serial_en_tx_intr(port);
+ } else {
+ port->tx_break = 0;
+ *port->_control &= ~SC01CTR_BKE;
+ mn10300_serial_en_tx_intr(port);
+ }
+}
+
+/*
+ * grab the interrupts and enable the port for reception
+ */
+static int mn10300_serial_startup(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+ struct mn10300_serial_int *pint;
+
+ _enter("%s{%d}", port->name, port->gdbstub);
+
+ if (unlikely(port->gdbstub))
+ return -EBUSY;
+
+ /* allocate an Rx buffer for the virtual DMA handler */
+ port->rx_buffer = kmalloc(MNSC_BUFFER_SIZE, GFP_KERNEL);
+ if (!port->rx_buffer)
+ return -ENOMEM;
+
+ port->rx_inp = port->rx_outp = 0;
+
+ /* finally, enable the device */
+ *port->_intr = SC01ICR_TI;
+ *port->_control |= SC01CTR_TXE | SC01CTR_RXE;
+
+ pint = &mn10300_serial_int_tbl[port->rx_irq];
+ pint->port = port;
+ pint->vdma = mn10300_serial_vdma_rx_handler;
+ pint = &mn10300_serial_int_tbl[port->tx_irq];
+ pint->port = port;
+ pint->vdma = mn10300_serial_vdma_tx_handler;
+
+ set_intr_level(port->rx_irq, GxICR_LEVEL_1);
+ set_intr_level(port->tx_irq, GxICR_LEVEL_1);
+ set_irq_chip(port->tm_irq, &mn10300_serial_pic);
+
+ if (request_irq(port->rx_irq, mn10300_serial_interrupt,
+ IRQF_DISABLED, port->rx_name, port) < 0)
+ goto error;
+
+ if (request_irq(port->tx_irq, mn10300_serial_interrupt,
+ IRQF_DISABLED, port->tx_name, port) < 0)
+ goto error2;
+
+ if (request_irq(port->tm_irq, mn10300_serial_interrupt,
+ IRQF_DISABLED, port->tm_name, port) < 0)
+ goto error3;
+ mn10300_serial_mask_ack(port->tm_irq);
+
+ return 0;
+
+error3:
+ free_irq(port->tx_irq, port);
+error2:
+ free_irq(port->rx_irq, port);
+error:
+ kfree(port->rx_buffer);
+ port->rx_buffer = NULL;
+ return -EBUSY;
+}
+
+/*
+ * shutdown the port and release interrupts
+ */
+static void mn10300_serial_shutdown(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ /* disable the serial port and its baud rate timer */
+ port->tx_break = 0;
+ *port->_control &= ~(SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE);
+ *port->_tmxmd = 0;
+
+ if (port->rx_buffer) {
+ void *buf = port->rx_buffer;
+ port->rx_buffer = NULL;
+ kfree(buf);
+ }
+
+ /* disable all intrs */
+ free_irq(port->tm_irq, port);
+ free_irq(port->rx_irq, port);
+ free_irq(port->tx_irq, port);
+
+ *port->rx_icr = GxICR_LEVEL_1;
+ *port->tx_icr = GxICR_LEVEL_1;
+}
+
+/*
+ * this routine is called to set the UART divisor registers to match the
+ * specified baud rate for a serial port.
+ */
+static void mn10300_serial_change_speed(struct mn10300_serial_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned long ioclk = port->ioclk;
+ unsigned cflag;
+ int baud, bits, xdiv, tmp;
+ u16 tmxbr, scxctr;
+ u8 tmxmd, battempt;
+ u8 div_timer = port->div_timer;
+
+ _enter("%s{%lu}", port->name, ioclk);
+
+ /* byte size and parity */
+ cflag = new->c_cflag;
+ switch (cflag & CSIZE) {
+ case CS7: scxctr = SC01CTR_CLN_7BIT; bits = 9; break;
+ case CS8: scxctr = SC01CTR_CLN_8BIT; bits = 10; break;
+ default: scxctr = SC01CTR_CLN_8BIT; bits = 10; break;
+ }
+
+ if (cflag & CSTOPB) {
+ scxctr |= SC01CTR_STB_2BIT;
+ bits++;
+ }
+
+ if (cflag & PARENB) {
+ bits++;
+ if (cflag & PARODD)
+ scxctr |= SC01CTR_PB_ODD;
+#ifdef CMSPAR
+ else if (cflag & CMSPAR)
+ scxctr |= SC01CTR_PB_FIXED0;
+#endif
+ else
+ scxctr |= SC01CTR_PB_EVEN;
+ }
+
+ /* Determine divisor based on baud rate */
+ battempt = 0;
+
+ if (div_timer == MNSCx_DIV_TIMER_16BIT)
+ scxctr |= SC0CTR_CK_TM8UFLOW_8; /* ( == SC1CTR_CK_TM9UFLOW_8
+ * == SC2CTR_CK_TM10UFLOW) */
+ else if (div_timer == MNSCx_DIV_TIMER_8BIT)
+ scxctr |= SC0CTR_CK_TM2UFLOW_8;
+
+try_alternative:
+ baud = uart_get_baud_rate(&port->uart, new, old, 0,
+ port->ioclk / 8);
+
+ _debug("ALT %d [baud %d]", battempt, baud);
+
+ if (!baud)
+ baud = 9600; /* B0 transition handled in rs_set_termios */
+ xdiv = 1;
+ if (baud == 134) {
+ baud = 269; /* 134 is really 134.5 */
+ xdiv = 2;
+ }
+
+ if (baud == 38400 &&
+ (port->uart.flags & UPF_SPD_MASK) == UPF_SPD_CUST
+ ) {
+ _debug("CUSTOM %u", port->uart.custom_divisor);
+
+ if (div_timer == MNSCx_DIV_TIMER_16BIT) {
+ if (port->uart.custom_divisor <= 65535) {
+ tmxmd = TM8MD_SRC_IOCLK;
+ tmxbr = port->uart.custom_divisor;
+ port->uart.uartclk = ioclk;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 8 <= 65535) {
+ tmxmd = TM8MD_SRC_IOCLK_8;
+ tmxbr = port->uart.custom_divisor / 8;
+ port->uart.custom_divisor = tmxbr * 8;
+ port->uart.uartclk = ioclk / 8;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 32 <= 65535) {
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ tmxbr = port->uart.custom_divisor / 32;
+ port->uart.custom_divisor = tmxbr * 32;
+ port->uart.uartclk = ioclk / 32;
+ goto timer_okay;
+ }
+
+ } else if (div_timer == MNSCx_DIV_TIMER_8BIT) {
+ if (port->uart.custom_divisor <= 255) {
+ tmxmd = TM2MD_SRC_IOCLK;
+ tmxbr = port->uart.custom_divisor;
+ port->uart.uartclk = ioclk;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 8 <= 255) {
+ tmxmd = TM2MD_SRC_IOCLK_8;
+ tmxbr = port->uart.custom_divisor / 8;
+ port->uart.custom_divisor = tmxbr * 8;
+ port->uart.uartclk = ioclk / 8;
+ goto timer_okay;
+ }
+ if (port->uart.custom_divisor / 32 <= 255) {
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = port->uart.custom_divisor / 32;
+ port->uart.custom_divisor = tmxbr * 32;
+ port->uart.uartclk = ioclk / 32;
+ goto timer_okay;
+ }
+ }
+ }
+
+ switch (div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ port->uart.uartclk = ioclk;
+ tmxmd = TM8MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 8;
+ tmxmd = TM8MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 32;
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 65535)
+ goto timer_okay;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ port->uart.uartclk = ioclk;
+ tmxmd = TM2MD_SRC_IOCLK;
+ tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 8;
+ tmxmd = TM2MD_SRC_IOCLK_8;
+ tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+
+ port->uart.uartclk = ioclk / 32;
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+ if (tmp > 0 && tmp <= 255)
+ goto timer_okay;
+ break;
+
+ default:
+ BUG();
+ return;
+ }
+
+ /* refuse to change to a baud rate we can't support */
+ _debug("CAN'T SUPPORT");
+
+ switch (battempt) {
+ case 0:
+ if (old) {
+ new->c_cflag &= ~CBAUD;
+ new->c_cflag |= (old->c_cflag & CBAUD);
+ battempt = 1;
+ goto try_alternative;
+ }
+
+ case 1:
+ /* as a last resort, if the quotient is zero, default to 9600
+ * bps */
+ new->c_cflag &= ~CBAUD;
+ new->c_cflag |= B9600;
+ battempt = 2;
+ goto try_alternative;
+
+ default:
+ /* hmmm... can't seem to support 9600 either
+ * - we could try iterating through the speeds we know about to
+ * find the lowest
+ */
+ new->c_cflag &= ~CBAUD;
+ new->c_cflag |= B0;
+
+ if (div_timer == MNSCx_DIV_TIMER_16BIT)
+ tmxmd = TM8MD_SRC_IOCLK_32;
+ else if (div_timer == MNSCx_DIV_TIMER_8BIT)
+ tmxmd = TM2MD_SRC_IOCLK_32;
+ tmxbr = 1;
+
+ port->uart.uartclk = ioclk / 32;
+ break;
+ }
+timer_okay:
+
+ _debug("UARTCLK: %u / %hu", port->uart.uartclk, tmxbr);
+
+ /* make the changes */
+ spin_lock_irqsave(&port->uart.lock, flags);
+
+ uart_update_timeout(&port->uart, new->c_cflag, baud);
+
+ /* set the timer to produce the required baud rate */
+ switch (div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ *port->_tmxmd = 0;
+ *port->_tmxbr = tmxbr;
+ *port->_tmxmd = TM8MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ *port->_tmxmd = 0;
+ *(volatile u8 *) port->_tmxbr = (u8) tmxbr;
+ *port->_tmxmd = TM2MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+ break;
+ }
+
+ /* CTS flow control flag and modem status interrupts */
+ scxctr &= ~(SC2CTR_TWE | SC2CTR_TWS);
+
+ if (port->type == PORT_MN10300_CTS && cflag & CRTSCTS) {
+ /* want to interrupt when CTS goes low if CTS is now
+ * high and vice versa
+ */
+ port->tx_cts = *port->_status;
+
+ if (port->tx_cts & SC2STR_CTS)
+ scxctr |= SC2CTR_TWE;
+ else
+ scxctr |= SC2CTR_TWE | SC2CTR_TWS;
+ }
+
+ /* set up parity check flag */
+ port->uart.read_status_mask = (1 << TTY_NORMAL) | (1 << TTY_OVERRUN);
+ if (new->c_iflag & INPCK)
+ port->uart.read_status_mask |=
+ (1 << TTY_PARITY) | (1 << TTY_FRAME);
+ if (new->c_iflag & (BRKINT | PARMRK))
+ port->uart.read_status_mask |= (1 << TTY_BREAK);
+
+ /* characters to ignore */
+ port->uart.ignore_status_mask = 0;
+ if (new->c_iflag & IGNPAR)
+ port->uart.ignore_status_mask |=
+ (1 << TTY_PARITY) | (1 << TTY_FRAME);
+ if (new->c_iflag & IGNBRK) {
+ port->uart.ignore_status_mask |= (1 << TTY_BREAK);
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns to (for real raw support).
+ */
+ if (new->c_iflag & IGNPAR)
+ port->uart.ignore_status_mask |= (1 << TTY_OVERRUN);
+ }
+
+ /* Ignore all characters if CREAD is not set */
+ if ((new->c_cflag & CREAD) == 0)
+ port->uart.ignore_status_mask |= (1 << TTY_NORMAL);
+
+ scxctr |= *port->_control & (SC01CTR_TXE | SC01CTR_RXE | SC01CTR_BKE);
+ *port->_control = scxctr;
+
+ spin_unlock_irqrestore(&port->uart.lock, flags);
+}
+
+/*
+ * set the terminal I/O parameters
+ */
+static void mn10300_serial_set_termios(struct uart_port *_port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s,%p,%p", port->name, new, old);
+
+ mn10300_serial_change_speed(port, new, old);
+
+ /* handle turning off CRTSCTS */
+ if (!(new->c_cflag & CRTSCTS)) {
+ u16 ctr = *port->_control;
+ ctr &= ~SC2CTR_TWE;
+ *port->_control = ctr;
+ }
+}
+
+/*
+ * return description of port type
+ */
+static const char *mn10300_serial_type(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ if (port->uart.type == PORT_MN10300_CTS)
+ return "MN10300 SIF_CTS";
+
+ return "MN10300 SIF";
+}
+
+/*
+ * release I/O and memory regions in use by port
+ */
+static void mn10300_serial_release_port(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ release_mem_region((unsigned long) port->_iobase, 16);
+}
+
+/*
+ * request I/O and memory regions for port
+ */
+static int mn10300_serial_request_port(struct uart_port *_port)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ request_mem_region((unsigned long) port->_iobase, 16, port->name);
+ return 0;
+}
+
+/*
+ * configure the type and reserve the ports
+ */
+static void mn10300_serial_config_port(struct uart_port *_port, int type)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+
+ _enter("%s", port->name);
+
+ port->uart.type = PORT_MN10300;
+
+ if (port->options & MNSCx_OPT_CTS)
+ port->uart.type = PORT_MN10300_CTS;
+
+ mn10300_serial_request_port(_port);
+}
+
+/*
+ * verify serial parameters are suitable for this port type
+ */
+static int mn10300_serial_verify_port(struct uart_port *_port,
+ struct serial_struct *ss)
+{
+ struct mn10300_serial_port *port =
+ container_of(_port, struct mn10300_serial_port, uart);
+ void *mapbase = (void *) (unsigned long) port->uart.mapbase;
+
+ _enter("%s", port->name);
+
+ /* these things may not be changed */
+ if (ss->irq != port->uart.irq ||
+ ss->port != port->uart.iobase ||
+ ss->io_type != port->uart.iotype ||
+ ss->iomem_base != mapbase ||
+ ss->iomem_reg_shift != port->uart.regshift ||
+ ss->hub6 != port->uart.hub6 ||
+ ss->xmit_fifo_size != port->uart.fifosize)
+ return -EINVAL;
+
+ /* type may be changed on a port that supports CTS */
+ if (ss->type != port->uart.type) {
+ if (!(port->options & MNSCx_OPT_CTS))
+ return -EINVAL;
+
+ if (ss->type != PORT_MN10300 &&
+ ss->type != PORT_MN10300_CTS)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * initialise the MN10300 on-chip UARTs
+ */
+static int __init mn10300_serial_init(void)
+{
+ struct mn10300_serial_port *port;
+ int ret, i;
+
+ printk(KERN_INFO "%s version %s (%s)\n",
+ serial_name, serial_version, serial_revdate);
+
+#ifdef CONFIG_MN10300_TTYSM2
+ SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */
+#endif
+
+ set_intr_stub(EXCEP_IRQ_LEVEL1, mn10300_serial_vdma_interrupt);
+
+ ret = uart_register_driver(&mn10300_serial_driver);
+ if (!ret) {
+ for (i = 0 ; i < NR_PORTS ; i++) {
+ port = mn10300_serial_ports[i];
+ if (!port || port->gdbstub)
+ continue;
+
+ switch (port->clock_src) {
+ case MNSCx_CLOCK_SRC_IOCLK:
+ port->ioclk = MN10300_IOCLK;
+ break;
+
+#ifdef MN10300_IOBCLK
+ case MNSCx_CLOCK_SRC_IOBCLK:
+ port->ioclk = MN10300_IOBCLK;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ ret = uart_add_one_port(&mn10300_serial_driver,
+ &port->uart);
+
+ if (ret < 0) {
+ _debug("ERROR %d", -ret);
+ break;
+ }
+ }
+
+ if (ret)
+ uart_unregister_driver(&mn10300_serial_driver);
+ }
+
+ return ret;
+}
+
+__initcall(mn10300_serial_init);
+
+
+#ifdef CONFIG_MN10300_TTYSM_CONSOLE
+
+/*
+ * print a string to the serial port without disturbing the real user of the
+ * port too much
+ * - the console must be locked by the caller
+ */
+static void mn10300_serial_console_write(struct console *co,
+ const char *s, unsigned count)
+{
+ struct mn10300_serial_port *port;
+ unsigned i;
+ u16 scxctr, txicr, tmp;
+ u8 tmxmd;
+
+ port = mn10300_serial_ports[co->index];
+
+ /* firstly hijack the serial port from the "virtual DMA" controller */
+ txicr = *port->tx_icr;
+ *port->tx_icr = GxICR_LEVEL_1;
+ tmp = *port->tx_icr;
+
+ /* the transmitter may be disabled */
+ scxctr = *port->_control;
+ if (!(scxctr & SC01CTR_TXE)) {
+ /* restart the UART clock */
+ tmxmd = *port->_tmxmd;
+
+ switch (port->div_timer) {
+ case MNSCx_DIV_TIMER_16BIT:
+ *port->_tmxmd = 0;
+ *port->_tmxmd = TM8MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+ break;
+
+ case MNSCx_DIV_TIMER_8BIT:
+ *port->_tmxmd = 0;
+ *port->_tmxmd = TM2MD_INIT_COUNTER;
+ *port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+ break;
+ }
+
+ /* enable the transmitter */
+ *port->_control = (scxctr & ~SC01CTR_BKE) | SC01CTR_TXE;
+
+ } else if (scxctr & SC01CTR_BKE) {
+ /* stop transmitting BREAK */
+ *port->_control = (scxctr & ~SC01CTR_BKE);
+ }
+
+ /* send the chars into the serial port (with LF -> LFCR conversion) */
+ for (i = 0; i < count; i++) {
+ char ch = *s++;
+
+ while (*port->_status & SC01STR_TBF)
+ continue;
+ *(u8 *) port->_txb = ch;
+
+ if (ch == 0x0a) {
+ while (*port->_status & SC01STR_TBF)
+ continue;
+ *(u8 *) port->_txb = 0xd;
+ }
+ }
+
+ /* can't let the transmitter be turned off if it's actually
+ * transmitting */
+ while (*port->_status & (SC01STR_TXF | SC01STR_TBF))
+ continue;
+
+ /* disable the transmitter if we re-enabled it */
+ if (!(scxctr & SC01CTR_TXE))
+ *port->_control = scxctr;
+
+ *port->tx_icr = txicr;
+ tmp = *port->tx_icr;
+}
+
+/*
+ * set up a serial port as a console
+ * - construct a cflag setting for the first rs_open()
+ * - initialize the serial port
+ * - return non-zero if we didn't find a serial port.
+ */
+static int __init mn10300_serial_console_setup(struct console *co,
+ char *options)
+{
+ struct mn10300_serial_port *port;
+ int i, parity = 'n', baud = 9600, bits = 8, flow = 0;
+
+ for (i = 0 ; i < NR_PORTS ; i++) {
+ port = mn10300_serial_ports[i];
+ if (port && !port->gdbstub && port->uart.line == co->index)
+ goto found_device;
+ }
+
+ return -ENODEV;
+
+found_device:
+ switch (port->clock_src) {
+ case MNSCx_CLOCK_SRC_IOCLK:
+ port->ioclk = MN10300_IOCLK;
+ break;
+
+#ifdef MN10300_IOBCLK
+ case MNSCx_CLOCK_SRC_IOBCLK:
+ port->ioclk = MN10300_IOBCLK;
+ break;
+#endif
+ default:
+ BUG();
+ }
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&port->uart, co, baud, parity, bits, flow);
+}
+
+/*
+ * register console
+ */
+static int __init mn10300_serial_console_init(void)
+{
+ register_console(&mn10300_serial_console);
+ return 0;
+}
+
+console_initcall(mn10300_serial_console_init);
+#endif
--- /dev/null
+/* MN10300 On-chip serial port driver definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _MN10300_SERIAL_H
+#define _MN10300_SERIAL_H
+
+#ifndef __ASSEMBLY__
+#include <linux/serial_core.h>
+#include <linux/termios.h>
+#endif
+
+#include <asm/page.h>
+#include <asm/serial-regs.h>
+
+#define NR_PORTS 3 /* should be set 3 or 9 or 16 */
+
+#define MNSC_BUFFER_SIZE +(PAGE_SIZE / 2)
+
+/* intr_flags bits */
+#define MNSCx_RX_AVAIL 0x01
+#define MNSCx_RX_OVERF 0x02
+#define MNSCx_TX_SPACE 0x04
+#define MNSCx_TX_EMPTY 0x08
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_serial_port {
+ char *rx_buffer; /* reception buffer base */
+ unsigned rx_inp; /* pointer to rx input offset */
+ unsigned rx_outp; /* pointer to rx output offset */
+ u8 tx_xchar; /* high-priority XON/XOFF buffer */
+ u8 tx_break; /* transmit break request */
+ u8 intr_flags; /* interrupt flags */
+ volatile u16 *rx_icr; /* Rx interrupt control register */
+ volatile u16 *tx_icr; /* Tx interrupt control register */
+ int rx_irq; /* reception IRQ */
+ int tx_irq; /* transmission IRQ */
+ int tm_irq; /* timer IRQ */
+
+ const char *name; /* name of serial port */
+ const char *rx_name; /* Rx interrupt handler name of serial port */
+ const char *tx_name; /* Tx interrupt handler name of serial port */
+ const char *tm_name; /* Timer interrupt handler name */
+ unsigned short type; /* type of serial port */
+ unsigned char isconsole; /* T if it's a console */
+ volatile void *_iobase; /* pointer to base of I/O control regs */
+ volatile u16 *_control; /* control register pointer */
+ volatile u8 *_status; /* status register pointer */
+ volatile u8 *_intr; /* interrupt register pointer */
+ volatile void *_rxb; /* receive buffer register pointer */
+ volatile void *_txb; /* transmit buffer register pointer */
+ volatile u16 *_tmicr; /* timer interrupt control register */
+ volatile u8 *_tmxmd; /* baud rate timer mode register */
+ volatile u16 *_tmxbr; /* baud rate timer base register */
+
+ /* this must come down here so that assembly can use BSET to access the
+ * above fields */
+ struct uart_port uart;
+
+ unsigned short rx_brk; /* current break reception status */
+ u16 tx_cts; /* current CTS status */
+ int gdbstub; /* preemptively stolen by GDB stub */
+
+ u8 clock_src; /* clock source */
+#define MNSCx_CLOCK_SRC_IOCLK 0
+#define MNSCx_CLOCK_SRC_IOBCLK 1
+
+ u8 div_timer; /* timer used as divisor */
+#define MNSCx_DIV_TIMER_16BIT 0
+#define MNSCx_DIV_TIMER_8BIT 1
+
+ u16 options; /* options */
+#define MNSCx_OPT_CTS 0x0001
+
+ unsigned long ioclk; /* base clock rate */
+};
+
+#ifdef CONFIG_MN10300_TTYSM0
+extern struct mn10300_serial_port mn10300_serial_port_sif0;
+#endif
+
+#ifdef CONFIG_MN10300_TTYSM1
+extern struct mn10300_serial_port mn10300_serial_port_sif1;
+#endif
+
+#ifdef CONFIG_MN10300_TTYSM2
+extern struct mn10300_serial_port mn10300_serial_port_sif2;
+#endif
+
+extern struct mn10300_serial_port *mn10300_serial_ports[];
+
+struct mn10300_serial_int {
+ struct mn10300_serial_port *port;
+ asmlinkage void (*vdma)(void);
+};
+
+extern struct mn10300_serial_int mn10300_serial_int_tbl[];
+
+extern asmlinkage void mn10300_serial_vdma_interrupt(void);
+extern asmlinkage void mn10300_serial_vdma_rx_handler(void);
+extern asmlinkage void mn10300_serial_vdma_tx_handler(void);
+
+#endif /* __ASSEMBLY__ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
+#define SCgSTR SC0STR
+#define SCgRXB SC0RXB
+#define SCgRXIRQ SC0RXIRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
+#define SCgSTR SC1STR
+#define SCgRXB SC1RXB
+#define SCgRXIRQ SC1RXIRQ
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM2)
+#define SCgSTR SC2STR
+#define SCgRXB SC2RXB
+#define SCgRXIRQ SC2RXIRQ
+#endif
+
+#endif /* _MN10300_SERIAL_H */
--- /dev/null
+###############################################################################
+#
+# MN10300 Watchdog interrupt handler
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/intctl-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/frame.inc>
+
+ .text
+
+###############################################################################
+#
+# Watchdog handler entry point
+# - special non-maskable interrupt
+#
+###############################################################################
+ .globl watchdog_handler
+ .type watchdog_handler,@function
+watchdog_handler:
+ add -4,sp
+ SAVE_ALL
+
+ mov 0xffffffff,d0
+ mov d0,(REG_ORIG_D0,fp)
+
+ mov fp,d0
+ lsr 2,d1
+ call watchdog_interrupt[],0 # watchdog_interrupt(regs,irq)
+
+ jmp ret_from_intr
+
+ .size watchdog_handler,.-watchdog_handler
+
+###############################################################################
+#
+# Watchdog touch entry point
+# - kept to absolute minimum (unfortunately, it's prototyped in linux/nmi.h so
+# we can't inline it)
+#
+###############################################################################
+ .globl touch_nmi_watchdog
+ .type touch_nmi_watchdog,@function
+touch_nmi_watchdog:
+ clr d0
+ mov d0,(watchdog_alert_counter)
+ ret [],0
+
+ .size touch_nmi_watchdog,.-touch_nmi_watchdog
--- /dev/null
+/* MN10300 Watchdog timer
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/kernel/nmi.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/nmi.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <asm/div64.h>
+#include <asm/smp.h>
+#include <asm/gdb-stub.h>
+#include <asm/proc/clock.h>
+
+static DEFINE_SPINLOCK(watchdog_print_lock);
+static unsigned int watchdog;
+static unsigned int watchdog_hz = 1;
+unsigned int watchdog_alert_counter;
+
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+/*
+ * the best way to detect whether a CPU has a 'hard lockup' problem
+ * is to check its timer makes IRQ counts. If they are not
+ * changing then that CPU has some problem.
+ *
+ * as these watchdog NMI IRQs are generated on every CPU, we only
+ * have to check the current processor.
+ *
+ * since NMIs dont listen to _any_ locks, we have to be extremely
+ * careful not to rely on unsafe variables. The printk might lock
+ * up though, so we have to break up any console locks first ...
+ * [when there will be more tty-related locks, break them up
+ * here too!]
+ */
+static unsigned int last_irq_sums[NR_CPUS];
+
+int __init check_watchdog(void)
+{
+ irq_cpustat_t tmp[1];
+
+ printk(KERN_INFO "Testing Watchdog... ");
+
+ memcpy(tmp, irq_stat, sizeof(tmp));
+ local_irq_enable();
+ mdelay((10 * 1000) / watchdog_hz); /* wait 10 ticks */
+ local_irq_disable();
+
+ if (nmi_count(0) - tmp[0].__nmi_count <= 5) {
+ printk(KERN_WARNING "CPU#%d: Watchdog appears to be stuck!\n",
+ 0);
+ return -1;
+ }
+
+ printk(KERN_INFO "OK.\n");
+
+ /* now that we know it works we can reduce NMI frequency to
+ * something more reasonable; makes a difference in some configs
+ */
+ watchdog_hz = 1;
+
+ return 0;
+}
+
+static int __init setup_watchdog(char *str)
+{
+ unsigned tmp;
+ int opt;
+ u8 ctr;
+
+ get_option(&str, &opt);
+ if (opt != 1)
+ return 0;
+
+ watchdog = opt;
+ if (watchdog) {
+ set_intr_stub(EXCEP_WDT, watchdog_handler);
+ ctr = WDCTR_WDCK_65536th;
+ WDCTR = WDCTR_WDRST | ctr;
+ WDCTR = ctr;
+ tmp = WDCTR;
+
+ tmp = __muldiv64u(1 << (16 + ctr * 2), 1000000, MN10300_WDCLK);
+ tmp = 1000000000 / tmp;
+ watchdog_hz = (tmp + 500) / 1000;
+ }
+
+ return 1;
+}
+
+__setup("watchdog=", setup_watchdog);
+
+void __init watchdog_go(void)
+{
+ u8 wdt;
+
+ if (watchdog) {
+ printk(KERN_INFO "Watchdog: running at %uHz\n", watchdog_hz);
+ wdt = WDCTR & ~WDCTR_WDCNE;
+ WDCTR = wdt | WDCTR_WDRST;
+ wdt = WDCTR;
+ WDCTR = wdt | WDCTR_WDCNE;
+ wdt = WDCTR;
+
+ check_watchdog();
+ }
+}
+
+asmlinkage
+void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
+{
+
+ /*
+ * Since current-> is always on the stack, and we always switch
+ * the stack NMI-atomically, it's safe to use smp_processor_id().
+ */
+ int sum, cpu = smp_processor_id();
+ u8 wdt, tmp;
+
+ wdt = WDCTR & ~WDCTR_WDCNE;
+ WDCTR = wdt;
+ tmp = WDCTR;
+ NMICR = NMICR_WDIF;
+
+ nmi_count(cpu)++;
+ kstat_this_cpu.irqs[NMIIRQ]++;
+ sum = irq_stat[cpu].__irq_count;
+
+ if (last_irq_sums[cpu] == sum) {
+ /*
+ * Ayiee, looks like this CPU is stuck ...
+ * wait a few IRQs (5 seconds) before doing the oops ...
+ */
+ watchdog_alert_counter++;
+ if (watchdog_alert_counter == 5 * watchdog_hz) {
+ spin_lock(&watchdog_print_lock);
+ /*
+ * We are in trouble anyway, lets at least try
+ * to get a message out.
+ */
+ bust_spinlocks(1);
+ printk(KERN_ERR
+ "NMI Watchdog detected LOCKUP on CPU%d,"
+ " pc %08lx, registers:\n",
+ cpu, regs->pc);
+ show_registers(regs);
+ printk("console shuts up ...\n");
+ console_silent();
+ spin_unlock(&watchdog_print_lock);
+ bust_spinlocks(0);
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_busy)
+ gdbstub_exception(regs, excep);
+ else
+ gdbstub_intercept(regs, excep);
+#endif
+ do_exit(SIGSEGV);
+ }
+ } else {
+ last_irq_sums[cpu] = sum;
+ watchdog_alert_counter = 0;
+ }
+
+ WDCTR = wdt | WDCTR_WDRST;
+ tmp = WDCTR;
+ WDCTR = wdt | WDCTR_WDCNE;
+ tmp = WDCTR;
+}
--- /dev/null
+/* MN10300 Miscellaneous and library kernel exports
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+
+EXPORT_SYMBOL(change_bit);
+EXPORT_SYMBOL(test_and_change_bit);
+
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memset);
+
+EXPORT_SYMBOL(strncpy_from_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_user);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(__generic_copy_from_user);
+EXPORT_SYMBOL(__generic_copy_to_user);
+EXPORT_SYMBOL(strnlen_user);
+
+extern u64 __ashrdi3(u64, unsigned);
+extern u64 __ashldi3(u64, unsigned);
+extern u64 __lshrdi3(u64, unsigned);
+extern s64 __negdi2(s64);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__negdi2);
--- /dev/null
+/* MN10300 Kernel module helper routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * - Derived from arch/i386/kernel/module.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt, ...)
+#endif
+
+/*
+ * allocate storage for a module
+ */
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return vmalloc_exec(size);
+}
+
+/*
+ * free memory returned from module_alloc()
+ */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /* FIXME: If module_region == mod->init_region, trim exception
+ * table entries. */
+}
+
+/*
+ * allow the arch to fix up the section table
+ * - we don't need anything special
+ */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+static uint32_t reloc_get16(uint8_t *p)
+{
+ return p[0] | (p[1] << 8);
+}
+
+static uint32_t reloc_get24(uint8_t *p)
+{
+ return reloc_get16(p) | (p[2] << 16);
+}
+
+static uint32_t reloc_get32(uint8_t *p)
+{
+ return reloc_get16(p) | (reloc_get16(p+2) << 16);
+}
+
+static void reloc_put16(uint8_t *p, uint32_t val)
+{
+ p[0] = val & 0xff;
+ p[1] = (val >> 8) & 0xff;
+}
+
+static void reloc_put24(uint8_t *p, uint32_t val)
+{
+ reloc_put16(p, val);
+ p[2] = (val >> 16) & 0xff;
+}
+
+static void reloc_put32(uint8_t *p, uint32_t val)
+{
+ reloc_put16(p, val);
+ reloc_put16(p+2, val >> 16);
+}
+
+/*
+ * apply a REL relocation
+ */
+int apply_relocate(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ printk(KERN_ERR "module %s: RELOCATION unsupported\n",
+ me->name);
+ return -ENOEXEC;
+}
+
+/*
+ * apply a RELA relocation
+ */
+int apply_relocate_add(Elf32_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf32_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ Elf32_Addr relocation;
+ uint8_t *location;
+ uint32_t value;
+
+ DEBUGP("Applying relocate section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* this is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+
+ /* this is the symbol the relocation is referring to (note that
+ * all undefined symbols have been resolved by the caller) */
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rel[i].r_info);
+
+ /* this is the adjustment to be made */
+ relocation = sym->st_value + rel[i].r_addend;
+
+ switch (ELF32_R_TYPE(rel[i].r_info)) {
+ /* for the first four relocation types, we add the
+ * adjustment into the value at the location given */
+ case R_MN10300_32:
+ value = reloc_get32(location);
+ value += relocation;
+ reloc_put32(location, value);
+ break;
+ case R_MN10300_24:
+ value = reloc_get24(location);
+ value += relocation;
+ reloc_put24(location, value);
+ break;
+ case R_MN10300_16:
+ value = reloc_get16(location);
+ value += relocation;
+ reloc_put16(location, value);
+ break;
+ case R_MN10300_8:
+ *location += relocation;
+ break;
+
+ /* for the next three relocation types, we write the
+ * adjustment with the address subtracted over the
+ * value at the location given */
+ case R_MN10300_PCREL32:
+ value = relocation - (uint32_t) location;
+ reloc_put32(location, value);
+ break;
+ case R_MN10300_PCREL16:
+ value = relocation - (uint32_t) location;
+ reloc_put16(location, value);
+ break;
+ case R_MN10300_PCREL8:
+ *location = relocation - (uint32_t) location;
+ break;
+
+ default:
+ printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ me->name, ELF32_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+/*
+ * finish loading the module
+ */
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ return 0;
+}
+
+/*
+ * finish clearing the module
+ */
+void module_arch_cleanup(struct module *mod)
+{
+}
--- /dev/null
+/* MN10300 Process handling code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/percpu.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu_context.h>
+#include <asm/fpu.h>
+#include <asm/reset-regs.h>
+#include <asm/gdb-stub.h>
+#include "internal.h"
+
+/*
+ * power management idle function, if any..
+ */
+void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
+
+/*
+ * return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+ return ((unsigned long *) tsk->thread.sp)[3];
+}
+
+/*
+ * power off function, if any
+ */
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+/*
+ * we use this if we don't have any better idle routine
+ */
+static void default_idle(void)
+{
+ local_irq_disable();
+ if (!need_resched())
+ safe_halt();
+ else
+ local_irq_enable();
+}
+
+/*
+ * the idle thread
+ * - there's no useful work to be done, so just try to conserve power and have
+ * a low exit latency (ie sit in a loop waiting for somebody to say that
+ * they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+ int cpu = smp_processor_id();
+
+ /* endless idle loop with no priority at all */
+ for (;;) {
+ while (!need_resched()) {
+ void (*idle)(void);
+
+ smp_rmb();
+ idle = pm_idle;
+ if (!idle)
+ idle = default_idle;
+
+ irq_stat[cpu].idle_timestamp = jiffies;
+ idle();
+ }
+
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
+}
+
+void release_segments(struct mm_struct *mm)
+{
+}
+
+void machine_restart(char *cmd)
+{
+#ifdef CONFIG_GDBSTUB
+ gdbstub_exit(0);
+#endif
+
+#ifdef mn10300_unit_hard_reset
+ mn10300_unit_hard_reset();
+#else
+ mn10300_proc_hard_reset();
+#endif
+}
+
+void machine_halt(void)
+{
+#ifdef CONFIG_GDBSTUB
+ gdbstub_exit(0);
+#endif
+}
+
+void machine_power_off(void)
+{
+#ifdef CONFIG_GDBSTUB
+ gdbstub_exit(0);
+#endif
+}
+
+void show_regs(struct pt_regs *regs)
+{
+}
+
+/*
+ * create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(®s, 0, sizeof(regs));
+
+ regs.a2 = (unsigned long) fn;
+ regs.d2 = (unsigned long) arg;
+ regs.pc = (unsigned long) kernel_thread_helper;
+ local_save_flags(regs.epsw);
+ regs.epsw |= EPSW_IE | EPSW_IM_7;
+
+ /* Ok, create the new process.. */
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0,
+ NULL, NULL);
+}
+
+/*
+ * free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+ exit_fpu();
+}
+
+void flush_thread(void)
+{
+ flush_fpu();
+}
+
+void release_thread(struct task_struct *dead_task)
+{
+}
+
+/*
+ * we do not have to muck with descriptors here, that is
+ * done in switch_mm() as needed.
+ */
+void copy_segments(struct task_struct *p, struct mm_struct *new_mm)
+{
+}
+
+/*
+ * this gets called before we allocate a new thread and copy the current task
+ * into it so that we can store lazy state into memory
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+ unlazy_fpu(tsk);
+}
+
+/*
+ * set up the kernel stack for a new thread and copy arch-specific thread
+ * control information
+ */
+int copy_thread(int nr, unsigned long clone_flags,
+ unsigned long c_usp, unsigned long ustk_size,
+ struct task_struct *p, struct pt_regs *kregs)
+{
+ struct pt_regs *c_uregs, *c_kregs, *uregs;
+ unsigned long c_ksp;
+
+ uregs = current->thread.uregs;
+
+ c_ksp = (unsigned long) task_stack_page(p) + THREAD_SIZE;
+
+ /* allocate the userspace exception frame and set it up */
+ c_ksp -= sizeof(struct pt_regs);
+ c_uregs = (struct pt_regs *) c_ksp;
+
+ p->thread.uregs = c_uregs;
+ *c_uregs = *uregs;
+ c_uregs->sp = c_usp;
+ c_uregs->epsw &= ~EPSW_FE; /* my FPU */
+
+ c_ksp -= 12; /* allocate function call ABI slack */
+
+ /* the new TLS pointer is passed in as arg #5 to sys_clone() */
+ if (clone_flags & CLONE_SETTLS)
+ c_uregs->e2 = __frame->d3;
+
+ /* set up the return kernel frame if called from kernel_thread() */
+ c_kregs = c_uregs;
+ if (kregs != uregs) {
+ c_ksp -= sizeof(struct pt_regs);
+ c_kregs = (struct pt_regs *) c_ksp;
+ *c_kregs = *kregs;
+ c_kregs->sp = c_usp;
+ c_kregs->next = c_uregs;
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ c_kregs->e2 = (unsigned long) p; /* current */
+#endif
+
+ c_ksp -= 12; /* allocate function call ABI slack */
+ }
+
+ /* set up things up so the scheduler can start the new task */
+ p->thread.__frame = c_kregs;
+ p->thread.a3 = (unsigned long) c_kregs;
+ p->thread.sp = c_ksp;
+ p->thread.pc = (unsigned long) ret_from_fork;
+ p->thread.wchan = (unsigned long) ret_from_fork;
+ p->thread.usp = c_usp;
+
+ return 0;
+}
+
+/*
+ * clone a process
+ * - tlsptr is retrieved by copy_thread() from __frame->d3
+ */
+asmlinkage long sys_clone(unsigned long clone_flags, unsigned long newsp,
+ int __user *parent_tidptr, int __user *child_tidptr,
+ int __user *tlsptr)
+{
+ return do_fork(clone_flags, newsp ?: __frame->sp, __frame, 0,
+ parent_tidptr, child_tidptr);
+}
+
+asmlinkage long sys_fork(void)
+{
+ return do_fork(SIGCHLD, __frame->sp, __frame, 0, NULL, NULL);
+}
+
+asmlinkage long sys_vfork(void)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, __frame->sp, __frame,
+ 0, NULL, NULL);
+}
+
+asmlinkage long sys_execve(char __user *name,
+ char __user * __user *argv,
+ char __user * __user *envp)
+{
+ char *filename;
+ int error;
+
+ lock_kernel();
+
+ filename = getname(name);
+ error = PTR_ERR(filename);
+ if (!IS_ERR(filename)) {
+ error = do_execve(filename, argv, envp, __frame);
+ if (error == 0)
+ current->ptrace &= ~PT_DTRACE;
+
+ putname(filename);
+ }
+
+ unlock_kernel();
+ return error;
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ return p->thread.wchan;
+}
--- /dev/null
+###############################################################################
+#
+# Fast profiling interrupt handler
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/timer-regs.h>
+
+#define pi break
+
+ .balign 4
+counter:
+ .long -1
+
+###############################################################################
+#
+# Profiling interrupt entry point
+# - intended to run at interrupt priority 1
+#
+###############################################################################
+ENTRY(profile_handler)
+ movm [d2,d3,a2],(sp)
+
+ # ignore userspace
+ mov (12,sp),d2
+ and EPSW_nSL,d2
+ bne out
+
+ # do nothing if there's no buffer
+ mov (prof_buffer),a2
+ and a2,a2
+ beq out
+ or 0x20000000,a2
+
+ # calculate relative position in text segment
+ mov (16,sp),d2
+ sub _stext,d2
+ mov (prof_shift),d3
+ lsr d3,d2
+ mov (prof_len),d3
+ cmp d3,d2
+ bcc outside_text
+
+ # increment the appropriate profile bucket
+do_inc:
+ asl2 d2
+ mov (a2,d2),d3
+ inc d3
+ mov d3,(a2,d2)
+out:
+ mov GxICR_DETECT,d2
+ movbu d2,(TM11ICR) # ACK the interrupt
+ movbu (TM11ICR),d2
+ movm (sp),[d2,d3,a2]
+ rti
+
+outside_text:
+ sub 1,d3
+ mov d3,d2
+ bra do_inc
--- /dev/null
+/* MN10300 Profiling setup
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * initialise the profiling if enabled
+ * - using with gdbstub will give anomalous results
+ * - can't be used with gdbstub if running at IRQ priority 0
+ */
+static __init int profile_init(void)
+{
+ u16 tmp;
+
+ if (!prof_buffer)
+ return 0;
+
+ /* use timer 11 to drive the profiling interrupts */
+ set_intr_stub(EXCEP_IRQ_LEVEL0, profile_handler);
+
+ /* set IRQ priority at which to run */
+ set_intr_level(TM11IRQ, GxICR_LEVEL_0);
+
+ /* set up timer 11
+ * - source: (IOCLK 33MHz)*2 = 66MHz
+ * - frequency: (33330000*2) / 8 / 20625 = 202Hz
+ */
+ TM11BR = 20625 - 1;
+ TM11MD = TM8MD_SRC_IOCLK_8;
+ TM11MD |= TM8MD_INIT_COUNTER;
+ TM11MD &= ~TM8MD_INIT_COUNTER;
+ TM11MD |= TM8MD_COUNT_ENABLE;
+
+ TM11ICR |= GxICR_ENABLE;
+ tmp = TM11ICR;
+
+ printk(KERN_INFO "Profiling initiated on timer 11, priority 0, %uHz\n",
+ mn10300_ioclk / 8 / (TM11BR + 1));
+ printk(KERN_INFO "Profile histogram stored %p-%p\n",
+ prof_buffer, (u8 *)(prof_buffer + prof_len) - 1);
+
+ return 0;
+}
+
+__initcall(profile_init);
--- /dev/null
+/* MN10300 Process tracing
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/fpu.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * translate ptrace register IDs into struct pt_regs offsets
+ */
+static const u8 ptrace_regid_to_frame[] = {
+ [PT_A3 << 2] = REG_A3,
+ [PT_A2 << 2] = REG_A2,
+ [PT_D3 << 2] = REG_D3,
+ [PT_D2 << 2] = REG_D2,
+ [PT_MCVF << 2] = REG_MCVF,
+ [PT_MCRL << 2] = REG_MCRL,
+ [PT_MCRH << 2] = REG_MCRH,
+ [PT_MDRQ << 2] = REG_MDRQ,
+ [PT_E1 << 2] = REG_E1,
+ [PT_E0 << 2] = REG_E0,
+ [PT_E7 << 2] = REG_E7,
+ [PT_E6 << 2] = REG_E6,
+ [PT_E5 << 2] = REG_E5,
+ [PT_E4 << 2] = REG_E4,
+ [PT_E3 << 2] = REG_E3,
+ [PT_E2 << 2] = REG_E2,
+ [PT_SP << 2] = REG_SP,
+ [PT_LAR << 2] = REG_LAR,
+ [PT_LIR << 2] = REG_LIR,
+ [PT_MDR << 2] = REG_MDR,
+ [PT_A1 << 2] = REG_A1,
+ [PT_A0 << 2] = REG_A0,
+ [PT_D1 << 2] = REG_D1,
+ [PT_D0 << 2] = REG_D0,
+ [PT_ORIG_D0 << 2] = REG_ORIG_D0,
+ [PT_EPSW << 2] = REG_EPSW,
+ [PT_PC << 2] = REG_PC,
+};
+
+static inline int get_stack_long(struct task_struct *task, int offset)
+{
+ return *(unsigned long *)
+ ((unsigned long) task->thread.uregs + offset);
+}
+
+/*
+ * this routine will put a word on the processes privileged stack.
+ * the offset is how far from the base addr as stored in the TSS.
+ * this routine assumes that all the privileged stacks are in our
+ * data space.
+ */
+static inline
+int put_stack_long(struct task_struct *task, int offset, unsigned long data)
+{
+ unsigned long stack;
+
+ stack = (unsigned long) task->thread.uregs + offset;
+ *(unsigned long *) stack = data;
+ return 0;
+}
+
+static inline unsigned long get_fpregs(struct fpu_state_struct *buf,
+ struct task_struct *tsk)
+{
+ return __copy_to_user(buf, &tsk->thread.fpu_state,
+ sizeof(struct fpu_state_struct));
+}
+
+static inline unsigned long set_fpregs(struct task_struct *tsk,
+ struct fpu_state_struct *buf)
+{
+ return __copy_from_user(&tsk->thread.fpu_state, buf,
+ sizeof(struct fpu_state_struct));
+}
+
+static inline void fpsave_init(struct task_struct *task)
+{
+ memset(&task->thread.fpu_state, 0, sizeof(struct fpu_state_struct));
+}
+
+/*
+ * make sure the single step bit is not set
+ */
+void ptrace_disable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+ struct user *dummy = NULL;
+ long tmp;
+
+ tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+ tmp &= ~EPSW_T;
+ put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * set the single step bit
+ */
+void ptrace_enable(struct task_struct *child)
+{
+#ifndef CONFIG_MN10300_USING_JTAG
+ struct user *dummy = NULL;
+ long tmp;
+
+ tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw);
+ tmp |= EPSW_T;
+ put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp);
+#endif
+}
+
+/*
+ * handle the arch-specific side of process tracing
+ */
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ struct fpu_state_struct fpu_state;
+ int i, ret;
+
+ switch (request) {
+ /* read the word at location addr. */
+ case PTRACE_PEEKTEXT: {
+ unsigned long tmp;
+ int copied;
+
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ ret = -EIO;
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (unsigned long *) data);
+ break;
+ }
+
+ /* read the word at location addr. */
+ case PTRACE_PEEKDATA: {
+ unsigned long tmp;
+ int copied;
+
+ copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
+ ret = -EIO;
+ if (copied != sizeof(tmp))
+ break;
+ ret = put_user(tmp, (unsigned long *) data);
+ break;
+ }
+
+ /* read the word at location addr in the USER area. */
+ case PTRACE_PEEKUSR: {
+ unsigned long tmp;
+
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 ||
+ addr > sizeof(struct user) - 3)
+ break;
+
+ tmp = 0; /* Default return condition */
+ if (addr < NR_PTREGS << 2)
+ tmp = get_stack_long(child,
+ ptrace_regid_to_frame[addr]);
+ ret = put_user(tmp, (unsigned long *) data);
+ break;
+ }
+
+ /* write the word at location addr. */
+ case PTRACE_POKETEXT:
+ case PTRACE_POKEDATA:
+ if (access_process_vm(child, addr, &data, sizeof(data), 1) ==
+ sizeof(data))
+ ret = 0;
+ else
+ ret = -EIO;
+ break;
+
+ /* write the word at location addr in the USER area */
+ case PTRACE_POKEUSR:
+ ret = -EIO;
+ if ((addr & 3) || addr < 0 ||
+ addr > sizeof(struct user) - 3)
+ break;
+
+ ret = 0;
+ if (addr < NR_PTREGS << 2)
+ ret = put_stack_long(child, ptrace_regid_to_frame[addr],
+ data);
+ break;
+
+ /* continue and stop at next (return from) syscall */
+ case PTRACE_SYSCALL:
+ /* restart after signal. */
+ case PTRACE_CONT:
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ child->exit_code = data;
+ ptrace_disable(child);
+ wake_up_process(child);
+ ret = 0;
+ break;
+
+ /*
+ * make the child exit
+ * - the best I can do is send it a sigkill
+ * - perhaps it should be put in the status that it wants to
+ * exit
+ */
+ case PTRACE_KILL:
+ ret = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+ ptrace_disable(child);
+ wake_up_process(child);
+ break;
+
+ case PTRACE_SINGLESTEP: /* set the trap flag. */
+#ifndef CONFIG_MN10300_USING_JTAG
+ ret = -EIO;
+ if ((unsigned long) data > _NSIG)
+ break;
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ ptrace_enable(child);
+ child->exit_code = data;
+ wake_up_process(child);
+ ret = 0;
+#else
+ ret = -EINVAL;
+#endif
+ break;
+
+ case PTRACE_DETACH: /* detach a process that was attached. */
+ ret = ptrace_detach(child, data);
+ break;
+
+ /* Get all gp regs from the child. */
+ case PTRACE_GETREGS: {
+ unsigned long tmp;
+
+ if (!access_ok(VERIFY_WRITE, (unsigned *) data, NR_PTREGS << 2)) {
+ ret = -EIO;
+ break;
+ }
+
+ for (i = 0; i < NR_PTREGS << 2; i += 4) {
+ tmp = get_stack_long(child, ptrace_regid_to_frame[i]);
+ __put_user(tmp, (unsigned long *) data);
+ data += sizeof(tmp);
+ }
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_SETREGS: { /* Set all gp regs in the child. */
+ unsigned long tmp;
+
+ if (!access_ok(VERIFY_READ, (unsigned long *)data,
+ sizeof(struct pt_regs))) {
+ ret = -EIO;
+ break;
+ }
+
+ for (i = 0; i < NR_PTREGS << 2; i += 4) {
+ __get_user(tmp, (unsigned long *) data);
+ put_stack_long(child, ptrace_regid_to_frame[i], tmp);
+ data += sizeof(tmp);
+ }
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_GETFPREGS: { /* Get the child FPU state. */
+ if (is_using_fpu(child)) {
+ unlazy_fpu(child);
+ fpu_state = child->thread.fpu_state;
+ } else {
+ memset(&fpu_state, 0, sizeof(fpu_state));
+ }
+
+ ret = -EIO;
+ if (copy_to_user((void *) data, &fpu_state,
+ sizeof(fpu_state)) == 0)
+ ret = 0;
+ break;
+ }
+
+ case PTRACE_SETFPREGS: { /* Set the child FPU state. */
+ ret = -EFAULT;
+ if (copy_from_user(&fpu_state, (const void *) data,
+ sizeof(fpu_state)) == 0) {
+ fpu_kill_state(child);
+ child->thread.fpu_state = fpu_state;
+ set_using_fpu(child);
+ ret = 0;
+ }
+ break;
+ }
+
+ case PTRACE_SETOPTIONS: {
+ if (data & PTRACE_O_TRACESYSGOOD)
+ child->ptrace |= PT_TRACESYSGOOD;
+ else
+ child->ptrace &= ~PT_TRACESYSGOOD;
+ ret = 0;
+ break;
+ }
+
+ default:
+ ret = -EIO;
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * notification of system call entry/exit
+ * - triggered by current->work.syscall_trace
+ */
+asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+{
+#if 0
+ /* just in case... */
+ printk(KERN_DEBUG "[%d] syscall_%lu(%lx,%lx,%lx,%lx) = %lx\n",
+ current->pid,
+ regs->orig_d0,
+ regs->a0,
+ regs->d1,
+ regs->a3,
+ regs->a2,
+ regs->d0);
+ return;
+#endif
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
+ !test_thread_flag(TIF_SINGLESTEP))
+ return;
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ /* the 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP |
+ ((current->ptrace & PT_TRACESYSGOOD) &&
+ !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
--- /dev/null
+/* MN10300 RTC management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+#include <linux/timex.h>
+#include <asm/rtc-regs.h>
+#include <asm/rtc.h>
+
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+/* last time the RTC got updated */
+static long last_rtc_update;
+
+/* time for RTC to update itself in ioclks */
+static unsigned long mn10300_rtc_update_period;
+
+/*
+ * read the current RTC time
+ */
+unsigned long __init get_initial_rtc_time(void)
+{
+ struct rtc_time tm;
+
+ get_rtc_time(&tm);
+
+ return mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be called 500
+ * ms after the second nowtime has started, because when nowtime is written
+ * into the registers of the CMOS clock, it will jump to the next second
+ * precisely 500 ms later. Check the Motorola MC146818A or Dallas DS12887 data
+ * sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+static int set_rtc_mmss(unsigned long nowtime)
+{
+ unsigned char save_control, save_freq_select;
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+
+ /* gets recalled with irq locally disabled */
+ spin_lock(&rtc_lock);
+ save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being
+ * set */
+ CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL);
+
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset
+ * prescaler */
+ CMOS_WRITE(save_freq_select | RTC_DIV_RESET2, RTC_FREQ_SELECT);
+
+ cmos_minutes = CMOS_READ(RTC_MINUTES);
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15) / 30) & 1)
+ /* correct for half hour time zone */
+ real_minutes += 30;
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ }
+ CMOS_WRITE(real_seconds, RTC_SECONDS);
+ CMOS_WRITE(real_minutes, RTC_MINUTES);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+ spin_unlock(&rtc_lock);
+
+ return retval;
+}
+
+void check_rtc_time(void)
+{
+ /* the RTC clock just finished ticking over again this second
+ * - if we have an externally synchronized Linux clock, then update
+ * RTC clock accordingly every ~11 minutes. set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+ if ((time_status & STA_UNSYNC) == 0 &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ xtime.tv_nsec / 1000 >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+ xtime.tv_nsec / 1000 <= 500000 + ((unsigned) TICK_SIZE) / 2
+ ) {
+ if (set_rtc_mmss(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ /* do it again in 60s */
+ last_rtc_update = xtime.tv_sec - 600;
+ }
+}
+
+/*
+ * calibrate the TSC clock against the RTC
+ */
+void __init calibrate_clock(void)
+{
+ unsigned long count0, counth, count1;
+ unsigned char status;
+
+ /* make sure the RTC is running and is set to operate in 24hr mode */
+ status = RTSRC;
+ RTCRB |= RTCRB_SET;
+ RTCRB |= RTCRB_TM_24HR;
+ RTCRA |= RTCRA_DVR;
+ RTCRA &= ~RTCRA_DVR;
+ RTCRB &= ~RTCRB_SET;
+
+ /* work out the clock speed by counting clock cycles between ends of
+ * the RTC update cycle - track the RTC through one complete update
+ * cycle (1 second)
+ */
+ startup_timestamp_counter();
+
+ while (!(RTCRA & RTCRA_UIP)) {}
+ while ((RTCRA & RTCRA_UIP)) {}
+
+ count0 = TMTSCBC;
+
+ while (!(RTCRA & RTCRA_UIP)) {}
+
+ counth = TMTSCBC;
+
+ while ((RTCRA & RTCRA_UIP)) {}
+
+ count1 = TMTSCBC;
+
+ shutdown_timestamp_counter();
+
+ MN10300_TSCCLK = count0 - count1; /* the timers count down */
+ mn10300_rtc_update_period = counth - count1;
+ MN10300_TSC_PER_HZ = MN10300_TSCCLK / HZ;
+}
--- /dev/null
+/* MN10300 Semaphore implementation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <asm/semaphore.h>
+
+struct sem_waiter {
+ struct list_head list;
+ struct task_struct *task;
+};
+
+#if SEMAPHORE_DEBUG
+void semtrace(struct semaphore *sem, const char *str)
+{
+ if (sem->debug)
+ printk(KERN_DEBUG "[%d] %s({%d,%d})\n",
+ current->pid,
+ str,
+ atomic_read(&sem->count),
+ list_empty(&sem->wait_list) ? 0 : 1);
+}
+#else
+#define semtrace(SEM, STR) do { } while (0)
+#endif
+
+/*
+ * wait for a token to be granted from a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+void __down(struct semaphore *sem, unsigned long flags)
+{
+ struct task_struct *tsk = current;
+ struct sem_waiter waiter;
+
+ semtrace(sem, "Entering __down");
+
+ /* set up my own style of waitqueue */
+ waiter.task = tsk;
+ get_task_struct(tsk);
+
+ list_add_tail(&waiter.list, &sem->wait_list);
+
+ /* we don't need to touch the semaphore struct anymore */
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+ /* wait to be given the semaphore */
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+
+ for (;;) {
+ if (!waiter.task)
+ break;
+ schedule();
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+ }
+
+ tsk->state = TASK_RUNNING;
+ semtrace(sem, "Leaving __down");
+}
+EXPORT_SYMBOL(__down);
+
+/*
+ * interruptibly wait for a token to be granted from a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+int __down_interruptible(struct semaphore *sem, unsigned long flags)
+{
+ struct task_struct *tsk = current;
+ struct sem_waiter waiter;
+ int ret;
+
+ semtrace(sem, "Entering __down_interruptible");
+
+ /* set up my own style of waitqueue */
+ waiter.task = tsk;
+ get_task_struct(tsk);
+
+ list_add_tail(&waiter.list, &sem->wait_list);
+
+ /* we don't need to touch the semaphore struct anymore */
+ set_task_state(tsk, TASK_INTERRUPTIBLE);
+
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+ /* wait to be given the semaphore */
+ ret = 0;
+ for (;;) {
+ if (!waiter.task)
+ break;
+ if (unlikely(signal_pending(current)))
+ goto interrupted;
+ schedule();
+ set_task_state(tsk, TASK_INTERRUPTIBLE);
+ }
+
+ out:
+ tsk->state = TASK_RUNNING;
+ semtrace(sem, "Leaving __down_interruptible");
+ return ret;
+
+ interrupted:
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ list_del(&waiter.list);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+
+ ret = 0;
+ if (!waiter.task) {
+ put_task_struct(current);
+ ret = -EINTR;
+ }
+ goto out;
+}
+EXPORT_SYMBOL(__down_interruptible);
+
+/*
+ * release a single token back to a semaphore
+ * - entered with lock held and interrupts disabled
+ */
+void __up(struct semaphore *sem)
+{
+ struct task_struct *tsk;
+ struct sem_waiter *waiter;
+
+ semtrace(sem, "Entering __up");
+
+ /* grant the token to the process at the front of the queue */
+ waiter = list_entry(sem->wait_list.next, struct sem_waiter, list);
+
+ /* We must be careful not to touch 'waiter' after we set ->task = NULL.
+ * It is an allocated on the waiter's stack and may become invalid at
+ * any time after that point (due to a wakeup from another source).
+ */
+ list_del_init(&waiter->list);
+ tsk = waiter->task;
+ smp_mb();
+ waiter->task = NULL;
+ wake_up_process(tsk);
+ put_task_struct(tsk);
+
+ semtrace(sem, "Leaving __up");
+}
+EXPORT_SYMBOL(__up);
--- /dev/null
+/* MN10300 Arch-specific initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <asm/processor.h>
+#include <linux/console.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/proc/proc.h>
+#include <asm/busctl-regs.h>
+#include <asm/fpu.h>
+#include <asm/sections.h>
+
+struct mn10300_cpuinfo boot_cpu_data;
+
+/* For PCI or other memory-mapped resources */
+unsigned long pci_mem_start = 0x18000000;
+
+char redboot_command_line[COMMAND_LINE_SIZE] =
+ "console=ttyS0,115200 root=/dev/mtdblock3 rw";
+
+char __initdata redboot_platform_name[COMMAND_LINE_SIZE];
+
+static struct resource code_resource = {
+ .start = 0x100000,
+ .end = 0,
+ .name = "Kernel code",
+};
+
+static struct resource data_resource = {
+ .start = 0,
+ .end = 0,
+ .name = "Kernel data",
+};
+
+static unsigned long __initdata phys_memory_base;
+static unsigned long __initdata phys_memory_end;
+static unsigned long __initdata memory_end;
+unsigned long memory_size;
+
+struct thread_info *__current_ti = &init_thread_union.thread_info;
+struct task_struct *__current = &init_task;
+
+#define mn10300_known_cpus 3
+static const char *const mn10300_cputypes[] = {
+ "am33v1",
+ "am33v2",
+ "am34v1",
+ "unknown"
+};
+
+/*
+ *
+ */
+static void __init parse_mem_cmdline(char **cmdline_p)
+{
+ char *from, *to, c;
+
+ /* save unparsed command line copy for /proc/cmdline */
+ strcpy(boot_command_line, redboot_command_line);
+
+ /* see if there's an explicit memory size option */
+ from = redboot_command_line;
+ to = redboot_command_line;
+ c = ' ';
+
+ for (;;) {
+ if (c == ' ' && !memcmp(from, "mem=", 4)) {
+ if (to != redboot_command_line)
+ to--;
+ memory_size = memparse(from + 4, &from);
+ }
+
+ c = *(from++);
+ if (!c)
+ break;
+
+ *(to++) = c;
+ }
+
+ *to = '\0';
+ *cmdline_p = redboot_command_line;
+
+ if (memory_size == 0)
+ panic("Memory size not known\n");
+
+ memory_end = (unsigned long) CONFIG_KERNEL_RAM_BASE_ADDRESS +
+ memory_size;
+ if (memory_end > phys_memory_end)
+ memory_end = phys_memory_end;
+}
+
+/*
+ * architecture specific setup
+ */
+void __init setup_arch(char **cmdline_p)
+{
+ unsigned long bootmap_size;
+ unsigned long kstart_pfn, start_pfn, free_pfn, end_pfn;
+
+ cpu_init();
+ unit_setup();
+ parse_mem_cmdline(cmdline_p);
+
+ init_mm.start_code = (unsigned long)&_text;
+ init_mm.end_code = (unsigned long) &_etext;
+ init_mm.end_data = (unsigned long) &_edata;
+ init_mm.brk = (unsigned long) &_end;
+
+ code_resource.start = virt_to_bus(&_text);
+ code_resource.end = virt_to_bus(&_etext)-1;
+ data_resource.start = virt_to_bus(&_etext);
+ data_resource.end = virt_to_bus(&_edata)-1;
+
+#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
+#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
+
+ start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
+ kstart_pfn = PFN_UP(__pa(&_text));
+ free_pfn = PFN_UP(__pa(&_end));
+ end_pfn = PFN_DOWN(__pa(memory_end));
+
+ bootmap_size = init_bootmem_node(&contig_page_data,
+ free_pfn,
+ start_pfn,
+ end_pfn);
+
+ if (kstart_pfn > start_pfn)
+ free_bootmem(PFN_PHYS(start_pfn),
+ PFN_PHYS(kstart_pfn - start_pfn));
+
+ free_bootmem(PFN_PHYS(free_pfn),
+ PFN_PHYS(end_pfn - free_pfn));
+
+ /* If interrupt vector table is in main ram, then we need to
+ reserve the page it is occupying. */
+ if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS &&
+ CONFIG_INTERRUPT_VECTOR_BASE < memory_end)
+ reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, 1,
+ BOOTMEM_DEFAULT);
+
+ reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size,
+ BOOTMEM_DEFAULT);
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+ conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+
+ paging_init();
+}
+
+/*
+ * perform CPU initialisation
+ */
+void __init cpu_init(void)
+{
+ unsigned long cpurev = CPUREV, type;
+ unsigned long base, size;
+
+ type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
+ if (type > mn10300_known_cpus)
+ type = mn10300_known_cpus;
+
+ printk(KERN_INFO "Matsushita %s, rev %ld\n",
+ mn10300_cputypes[type],
+ (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S);
+
+ /* determine the memory size and base from the memory controller regs */
+ memory_size = 0;
+
+ base = SDBASE(0);
+ if (base & SDBASE_CE) {
+ size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
+ size = ~size + 1;
+ base &= SDBASE_CBA;
+
+ printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base);
+ memory_size += size;
+ phys_memory_base = base;
+ }
+
+ base = SDBASE(1);
+ if (base & SDBASE_CE) {
+ size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
+ size = ~size + 1;
+ base &= SDBASE_CBA;
+
+ printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base);
+ memory_size += size;
+ if (phys_memory_base == 0)
+ phys_memory_base = base;
+ }
+
+ phys_memory_end = phys_memory_base + memory_size;
+
+#ifdef CONFIG_FPU
+ fpu_init_state();
+#endif
+}
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ unsigned long cpurev = CPUREV, type, icachesz, dcachesz;
+
+ type = (CPUREV & CPUREV_TYPE) >> CPUREV_TYPE_S;
+ if (type > mn10300_known_cpus)
+ type = mn10300_known_cpus;
+
+ icachesz =
+ ((cpurev & CPUREV_ICWAY ) >> CPUREV_ICWAY_S) *
+ ((cpurev & CPUREV_ICSIZE) >> CPUREV_ICSIZE_S) *
+ 1024;
+
+ dcachesz =
+ ((cpurev & CPUREV_DCWAY ) >> CPUREV_DCWAY_S) *
+ ((cpurev & CPUREV_DCSIZE) >> CPUREV_DCSIZE_S) *
+ 1024;
+
+ seq_printf(m,
+ "processor : 0\n"
+ "vendor_id : Matsushita\n"
+ "cpu core : %s\n"
+ "cpu rev : %lu\n"
+ "model name : " PROCESSOR_MODEL_NAME "\n"
+ "icache size: %lu\n"
+ "dcache size: %lu\n",
+ mn10300_cputypes[type],
+ (cpurev & CPUREV_REVISION) >> CPUREV_REVISION_S,
+ icachesz,
+ dcachesz
+ );
+
+ seq_printf(m,
+ "ioclk speed: %lu.%02luMHz\n"
+ "bogomips : %lu.%02lu\n\n",
+ MN10300_IOCLK / 1000000,
+ (MN10300_IOCLK / 10000) % 100,
+ loops_per_jiffy / (500000 / HZ),
+ (loops_per_jiffy / (5000 / HZ)) % 100
+ );
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
--- /dev/null
+/* MN10300 Signal frame definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+struct sigframe
+{
+ void (*pretcode)(void);
+ int sig;
+ struct sigcontext *psc;
+ struct sigcontext sc;
+ struct fpucontext fpuctx;
+ unsigned long extramask[_NSIG_WORDS-1];
+ char retcode[8];
+};
+
+struct rt_sigframe
+{
+ void (*pretcode)(void);
+ int sig;
+ struct siginfo *pinfo;
+ void *puc;
+ struct siginfo info;
+ struct ucontext uc;
+ struct fpucontext fpuctx;
+ char retcode[8];
+};
--- /dev/null
+/* MN10300 Signal handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/tty.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/ucontext.h>
+#include <asm/uaccess.h>
+#include <asm/fpu.h>
+#include "sigframe.h"
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage long sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+{
+ mask &= _BLOCKABLE;
+ spin_lock_irq(¤t->sighand->siglock);
+ current->saved_sigmask = current->blocked;
+ siginitset(¤t->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ set_thread_flag(TIF_RESTORE_SIGMASK);
+ return -ERESTARTNOHAND;
+}
+
+/*
+ * set signal action syscall
+ */
+asmlinkage long sys_sigaction(int sig,
+ const struct old_sigaction __user *act,
+ struct old_sigaction __user *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ int ret;
+
+ if (act) {
+ old_sigset_t mask;
+ if (verify_area(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+/*
+ * set alternate signal stack syscall
+ */
+asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t *uoss)
+{
+ return do_sigaltstack(uss, uoss, __frame->sp);
+}
+
+/*
+ * do a signal return; undo the signal stack.
+ */
+static int restore_sigcontext(struct pt_regs *regs,
+ struct sigcontext __user *sc, long *_d0)
+{
+ unsigned int err = 0;
+
+ if (is_using_fpu(current))
+ fpu_kill_state(current);
+
+#define COPY(x) err |= __get_user(regs->x, &sc->x)
+ COPY(d1); COPY(d2); COPY(d3);
+ COPY(a0); COPY(a1); COPY(a2); COPY(a3);
+ COPY(e0); COPY(e1); COPY(e2); COPY(e3);
+ COPY(e4); COPY(e5); COPY(e6); COPY(e7);
+ COPY(lar); COPY(lir);
+ COPY(mdr); COPY(mdrq);
+ COPY(mcvf); COPY(mcrl); COPY(mcrh);
+ COPY(sp); COPY(pc);
+#undef COPY
+
+ {
+ unsigned int tmpflags;
+#ifndef CONFIG_MN10300_USING_JTAG
+#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
+ EPSW_T | EPSW_nAR)
+#else
+#define USER_EPSW (EPSW_FLAG_Z | EPSW_FLAG_N | EPSW_FLAG_C | EPSW_FLAG_V | \
+ EPSW_nAR)
+#endif
+ err |= __get_user(tmpflags, &sc->epsw);
+ regs->epsw = (regs->epsw & ~USER_EPSW) |
+ (tmpflags & USER_EPSW);
+ regs->orig_d0 = -1; /* disable syscall checks */
+ }
+
+ {
+ struct fpucontext *buf;
+ err |= __get_user(buf, &sc->fpucontext);
+ if (buf) {
+ if (verify_area(VERIFY_READ, buf, sizeof(*buf)))
+ goto badframe;
+ err |= fpu_restore_sigcontext(buf);
+ }
+ }
+
+ err |= __get_user(*_d0, &sc->d0);
+ return err;
+
+badframe:
+ return 1;
+}
+
+/*
+ * standard signal return syscall
+ */
+asmlinkage long sys_sigreturn(void)
+{
+ struct sigframe __user *frame = (struct sigframe __user *) __frame->sp;
+ sigset_t set;
+ long d0;
+
+ if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__get_user(set.sig[0], &frame->sc.oldmask))
+ goto badframe;
+
+ if (_NSIG_WORDS > 1 &&
+ __copy_from_user(&set.sig[1], &frame->extramask,
+ sizeof(frame->extramask)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(__frame, &frame->sc, &d0))
+ goto badframe;
+
+ return d0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * realtime signal return syscall
+ */
+asmlinkage long sys_rt_sigreturn(void)
+{
+ struct rt_sigframe __user *frame =
+ (struct rt_sigframe __user *) __frame->sp;
+ sigset_t set;
+ unsigned long d0;
+
+ if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(__frame, &frame->uc.uc_mcontext, &d0))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, __frame->sp) == -EFAULT)
+ goto badframe;
+
+ return d0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * store the userspace context into a signal frame
+ */
+static int setup_sigcontext(struct sigcontext __user *sc,
+ struct fpucontext *fpuctx,
+ struct pt_regs *regs,
+ unsigned long mask)
+{
+ int tmp, err = 0;
+
+#define COPY(x) err |= __put_user(regs->x, &sc->x)
+ COPY(d0); COPY(d1); COPY(d2); COPY(d3);
+ COPY(a0); COPY(a1); COPY(a2); COPY(a3);
+ COPY(e0); COPY(e1); COPY(e2); COPY(e3);
+ COPY(e4); COPY(e5); COPY(e6); COPY(e7);
+ COPY(lar); COPY(lir);
+ COPY(mdr); COPY(mdrq);
+ COPY(mcvf); COPY(mcrl); COPY(mcrh);
+ COPY(sp); COPY(epsw); COPY(pc);
+#undef COPY
+
+ tmp = fpu_setup_sigcontext(fpuctx);
+ if (tmp < 0)
+ err = 1;
+ else
+ err |= __put_user(tmp ? fpuctx : NULL, &sc->fpucontext);
+
+ /* non-iBCS2 extensions.. */
+ err |= __put_user(mask, &sc->oldmask);
+
+ return err;
+}
+
+/*
+ * determine which stack to use..
+ */
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+ struct pt_regs *regs,
+ size_t frame_size)
+{
+ unsigned long sp;
+
+ /* default to using normal stack */
+ sp = regs->sp;
+
+ /* this is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (!on_sig_stack(sp))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+ }
+
+ return (void __user *) ((sp - frame_size) & ~7UL);
+}
+
+/*
+ * set up a normal signal frame
+ */
+static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
+ struct pt_regs *regs)
+{
+ struct sigframe __user *frame;
+ int rsig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ rsig = sig;
+ if (sig < 32 &&
+ current_thread_info()->exec_domain &&
+ current_thread_info()->exec_domain->signal_invmap)
+ rsig = current_thread_info()->exec_domain->signal_invmap[sig];
+
+ if (__put_user(rsig, &frame->sig) < 0 ||
+ __put_user(&frame->sc, &frame->psc) < 0)
+ goto give_sigsegv;
+
+ if (setup_sigcontext(&frame->sc, &frame->fpuctx, regs, set->sig[0]))
+ goto give_sigsegv;
+
+ if (_NSIG_WORDS > 1) {
+ if (__copy_to_user(frame->extramask, &set->sig[1],
+ sizeof(frame->extramask)))
+ goto give_sigsegv;
+ }
+
+ /* set up to return from userspace. If provided, use a stub already in
+ * userspace */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
+ goto give_sigsegv;
+ } else {
+ if (__put_user((void (*)(void))frame->retcode,
+ &frame->pretcode))
+ goto give_sigsegv;
+ /* this is mov $,d0; syscall 0 */
+ if (__put_user(0x2c, (char *)(frame->retcode + 0)) ||
+ __put_user(__NR_sigreturn, (char *)(frame->retcode + 1)) ||
+ __put_user(0x00, (char *)(frame->retcode + 2)) ||
+ __put_user(0xf0, (char *)(frame->retcode + 3)) ||
+ __put_user(0xe0, (char *)(frame->retcode + 4)))
+ goto give_sigsegv;
+ flush_icache_range((unsigned long) frame->retcode,
+ (unsigned long) frame->retcode + 5);
+ }
+
+ /* set up registers for signal handler */
+ regs->sp = (unsigned long) frame;
+ regs->pc = (unsigned long) ka->sa.sa_handler;
+ regs->d0 = sig;
+ regs->d1 = (unsigned long) &frame->sc;
+
+ set_fs(USER_DS);
+
+ /* the tracer may want to single-step inside the handler */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+ sig, current->comm, current->pid, frame, regs->pc,
+ frame->pretcode);
+#endif
+
+ return 0;
+
+give_sigsegv:
+ force_sig(SIGSEGV, current);
+ return -EFAULT;
+}
+
+/*
+ * set up a realtime signal frame
+ */
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame;
+ int rsig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ rsig = sig;
+ if (sig < 32 &&
+ current_thread_info()->exec_domain &&
+ current_thread_info()->exec_domain->signal_invmap)
+ rsig = current_thread_info()->exec_domain->signal_invmap[sig];
+
+ if (__put_user(rsig, &frame->sig) ||
+ __put_user(&frame->info, &frame->pinfo) ||
+ __put_user(&frame->uc, &frame->puc) ||
+ copy_siginfo_to_user(&frame->info, info))
+ goto give_sigsegv;
+
+ /* create the ucontext. */
+ if (__put_user(0, &frame->uc.uc_flags) ||
+ __put_user(0, &frame->uc.uc_link) ||
+ __put_user((void *)current->sas_ss_sp, &frame->uc.uc_stack.ss_sp) ||
+ __put_user(sas_ss_flags(regs->sp), &frame->uc.uc_stack.ss_flags) ||
+ __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size) ||
+ setup_sigcontext(&frame->uc.uc_mcontext,
+ &frame->fpuctx, regs, set->sig[0]) ||
+ __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)))
+ goto give_sigsegv;
+
+ /* set up to return from userspace. If provided, use a stub already in
+ * userspace */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ if (__put_user(ka->sa.sa_restorer, &frame->pretcode))
+ goto give_sigsegv;
+ } else {
+ if (__put_user((void(*)(void))frame->retcode,
+ &frame->pretcode) ||
+ /* This is mov $,d0; syscall 0 */
+ __put_user(0x2c, (char *)(frame->retcode + 0)) ||
+ __put_user(__NR_rt_sigreturn,
+ (char *)(frame->retcode + 1)) ||
+ __put_user(0x00, (char *)(frame->retcode + 2)) ||
+ __put_user(0xf0, (char *)(frame->retcode + 3)) ||
+ __put_user(0xe0, (char *)(frame->retcode + 4)))
+ goto give_sigsegv;
+
+ flush_icache_range((u_long) frame->retcode,
+ (u_long) frame->retcode + 5);
+ }
+
+ /* Set up registers for signal handler */
+ regs->sp = (unsigned long) frame;
+ regs->pc = (unsigned long) ka->sa.sa_handler;
+ regs->d0 = sig;
+ regs->d1 = (long) &frame->info;
+
+ set_fs(USER_DS);
+
+ /* the tracer may want to single-step inside the handler */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+#if DEBUG_SIG
+ printk(KERN_DEBUG "SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n",
+ sig, current->comm, current->pid, frame, regs->pc,
+ frame->pretcode);
+#endif
+
+ return 0;
+
+give_sigsegv:
+ force_sig(SIGSEGV, current);
+ return -EFAULT;
+}
+
+/*
+ * handle the actual delivery of a signal to userspace
+ */
+static int handle_signal(int sig,
+ siginfo_t *info, struct k_sigaction *ka,
+ sigset_t *oldset, struct pt_regs *regs)
+{
+ int ret;
+
+ /* Are we from a system call? */
+ if (regs->orig_d0 >= 0) {
+ /* If so, check system call restarting.. */
+ switch (regs->d0) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->d0 = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->d0 = -EINTR;
+ break;
+ }
+
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ regs->d0 = regs->orig_d0;
+ regs->pc -= 2;
+ }
+ }
+
+ /* Set up the stack frame */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+ ret = setup_frame(sig, ka, oldset, regs);
+
+ if (ret == 0) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked, ¤t->blocked,
+ &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+
+ return ret;
+}
+
+/*
+ * handle a potential signal
+ */
+static void do_signal(struct pt_regs *regs)
+{
+ struct k_sigaction ka;
+ siginfo_t info;
+ sigset_t *oldset;
+ int signr;
+
+ /* we want the common case to go fast, which is why we may in certain
+ * cases get here from kernel mode */
+ if (!user_mode(regs))
+ return;
+
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ oldset = ¤t->saved_sigmask;
+ else
+ oldset = ¤t->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /* a signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TIF_RESTORE_SIGMASK flag */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ }
+
+ return;
+ }
+
+ /* did we come from a system call? */
+ if (regs->orig_d0 >= 0) {
+ /* restart the system call - no handlers present */
+ switch (regs->d0) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ regs->d0 = regs->orig_d0;
+ regs->pc -= 2;
+ break;
+
+ case -ERESTART_RESTARTBLOCK:
+ regs->d0 = __NR_restart_syscall;
+ regs->pc -= 2;
+ break;
+ }
+ }
+
+ /* if there's no signal to deliver, we just put the saved sigmask
+ * back */
+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+ clear_thread_flag(TIF_RESTORE_SIGMASK);
+ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
+ }
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by current->work.notify_resume
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
+{
+ /* Pending single-step? */
+ if (thread_info_flags & _TIF_SINGLESTEP) {
+#ifndef CONFIG_MN10300_USING_JTAG
+ regs->epsw |= EPSW_T;
+ clear_thread_flag(TIF_SINGLESTEP);
+#else
+ BUG(); /* no h/w single-step if using JTAG unit */
+#endif
+ }
+
+ /* deal with pending signal delivery */
+ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+ do_signal(regs);
+}
--- /dev/null
+###############################################################################
+#
+# MN10300 Context switch operation
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/cpu-regs.h>
+
+ .text
+
+###############################################################################
+#
+# struct task_struct *__switch_to(struct thread_struct *prev,
+# struct thread_struct *next,
+# struct task_struct *prev_task)
+#
+###############################################################################
+ENTRY(__switch_to)
+ movm [d2,d3,a2,a3,exreg1],(sp)
+ or EPSW_NMID,epsw
+
+ mov (44,sp),d2
+
+ mov d0,a0
+ mov d1,a1
+
+ # save prev context
+ mov (__frame),d0
+ mov d0,(THREAD_FRAME,a0)
+ mov __switch_back,d0
+ mov d0,(THREAD_PC,a0)
+ mov sp,a2
+ mov a2,(THREAD_SP,a0)
+ mov a3,(THREAD_A3,a0)
+
+ mov (THREAD_A3,a1),a3
+ mov (THREAD_SP,a1),a2
+
+ # switch
+ mov a2,sp
+
+ # load next context
+ GET_THREAD_INFO a2
+ mov a2,(__current_ti)
+ mov (TI_task,a2),a2
+ mov a2,(__current)
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ mov a2,e2
+#endif
+
+ mov (THREAD_FRAME,a1),a2
+ mov a2,(__frame)
+ mov (THREAD_PC,a1),a2
+ mov d2,d0 # for ret_from_fork
+ mov d0,a0 # for __switch_to
+
+ jmp (a2)
+
+__switch_back:
+ and ~EPSW_NMID,epsw
+ ret [d2,d3,a2,a3,exreg1],32
--- /dev/null
+/* MN10300 Weird system calls
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/syscalls.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/utsname.h>
+#include <linux/syscalls.h>
+#include <linux/tty.h>
+
+#include <asm/uaccess.h>
+
+#define MIN_MAP_ADDR PAGE_SIZE /* minimum fixed mmap address */
+
+/*
+ * sys_pipe() is the normal C calling standard for creating
+ * a pipe. It's not the way Unix traditionally does this, though.
+ */
+asmlinkage long sys_pipe(unsigned long __user *fildes)
+{
+ int fd[2];
+ int error;
+
+ error = do_pipe(fd);
+ if (!error) {
+ if (copy_to_user(fildes, fd, 2 * sizeof(int)))
+ error = -EFAULT;
+ }
+ return error;
+}
+
+/*
+ * memory mapping syscall
+ */
+asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ struct file *file = NULL;
+ long error = -EINVAL;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+
+ if (flags & MAP_FIXED && addr < MIN_MAP_ADDR)
+ goto out;
+
+ error = -EBADF;
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
+
+ down_write(¤t->mm->mmap_sem);
+ error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+
+ if (file)
+ fput(file);
+out:
+ return error;
+}
+
+asmlinkage long old_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long offset)
+{
+ if (offset & ~PAGE_MASK)
+ return -EINVAL;
+ return sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+}
+
+struct sel_arg_struct {
+ unsigned long n;
+ fd_set *inp;
+ fd_set *outp;
+ fd_set *exp;
+ struct timeval *tvp;
+};
+
+asmlinkage int old_select(struct sel_arg_struct __user *arg)
+{
+ struct sel_arg_struct a;
+
+ if (copy_from_user(&a, arg, sizeof(a)))
+ return -EFAULT;
+ /* sys_select() does the appropriate kernel locking */
+ return sys_select(a.n, a.inp, a.outp, a.exp, a.tvp);
+}
+
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly.
+ */
+asmlinkage long sys_ipc(uint call, int first, int second,
+ int third, void __user *ptr, long fifth)
+{
+ int version, ret;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ switch (call) {
+ case SEMOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr,
+ second, NULL);
+ case SEMTIMEDOP:
+ return sys_semtimedop(first, (struct sembuf __user *)ptr,
+ second,
+ (const struct timespec __user *)fifth);
+ case SEMGET:
+ return sys_semget(first, second, third);
+ case SEMCTL: {
+ union semun fourth;
+ if (!ptr)
+ return -EINVAL;
+ if (get_user(fourth.__pad, (void __user * __user *) ptr))
+ return -EFAULT;
+ return sys_semctl(first, second, third, fourth);
+ }
+
+ case MSGSND:
+ return sys_msgsnd(first, (struct msgbuf __user *) ptr,
+ second, third);
+ case MSGRCV:
+ switch (version) {
+ case 0: {
+ struct ipc_kludge tmp;
+ if (!ptr)
+ return -EINVAL;
+
+ if (copy_from_user(&tmp,
+ (struct ipc_kludge __user *) ptr,
+ sizeof(tmp)))
+ return -EFAULT;
+ return sys_msgrcv(first, tmp.msgp, second,
+ tmp.msgtyp, third);
+ }
+ default:
+ return sys_msgrcv(first,
+ (struct msgbuf __user *) ptr,
+ second, fifth, third);
+ }
+ case MSGGET:
+ return sys_msgget((key_t) first, second);
+ case MSGCTL:
+ return sys_msgctl(first, second,
+ (struct msqid_ds __user *) ptr);
+
+ case SHMAT:
+ switch (version) {
+ default: {
+ ulong raddr;
+ ret = do_shmat(first, (char __user *) ptr, second,
+ &raddr);
+ if (ret)
+ return ret;
+ return put_user(raddr, (ulong *) third);
+ }
+ case 1: /* iBCS2 emulator entry point */
+ if (!segment_eq(get_fs(), get_ds()))
+ return -EINVAL;
+ return do_shmat(first, (char __user *) ptr, second,
+ (ulong *) third);
+ }
+ case SHMDT:
+ return sys_shmdt((char __user *)ptr);
+ case SHMGET:
+ return sys_shmget(first, second, third);
+ case SHMCTL:
+ return sys_shmctl(first, second,
+ (struct shmid_ds __user *) ptr);
+ default:
+ return -EINVAL;
+ }
+}
--- /dev/null
+/* MN10300 Low level time management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/kernel/time.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/profile.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc.h>
+
+#ifdef CONFIG_MN10300_RTC
+unsigned long mn10300_ioclk; /* system I/O clock frequency */
+unsigned long mn10300_iobclk; /* system I/O clock frequency */
+unsigned long mn10300_tsc_per_HZ; /* number of ioclks per jiffy */
+#endif /* CONFIG_MN10300_RTC */
+
+static unsigned long mn10300_last_tsc; /* time-stamp counter at last time
+ * interrupt occurred */
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+static struct irqaction timer_irq = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_SHARED | IRQF_TIMER,
+ .mask = CPU_MASK_NONE,
+ .name = "timer",
+};
+
+/*
+ * scheduler clock - returns current time in nanosec units.
+ */
+unsigned long long sched_clock(void)
+{
+ union {
+ unsigned long long l;
+ u32 w[2];
+ } quot;
+
+ quot.w[0] = mn10300_last_tsc - get_cycles();
+ quot.w[1] = 1000000000;
+
+ asm("mulu %2,%3,%0,%1"
+ : "=r"(quot.w[1]), "=r"(quot.w[0])
+ : "0"(quot.w[1]), "1"(quot.w[0])
+ : "cc");
+
+ do_div(quot.l, MN10300_TSCCLK);
+
+ return quot.l;
+}
+
+/*
+ * advance the kernel's time keeping clocks (xtime and jiffies)
+ * - we use Timer 0 & 1 cascaded as a clock to nudge us the next time
+ * there's a need to update
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ unsigned tsc, elapse;
+
+ write_seqlock(&xtime_lock);
+
+ while (tsc = get_cycles(),
+ elapse = mn10300_last_tsc - tsc, /* time elapsed since last
+ * tick */
+ elapse > MN10300_TSC_PER_HZ
+ ) {
+ mn10300_last_tsc -= MN10300_TSC_PER_HZ;
+
+ /* advance the kernel's time tracking system */
+ profile_tick(CPU_PROFILING);
+ do_timer(1);
+ update_process_times(user_mode(get_irq_regs()));
+ check_rtc_time();
+ }
+
+ write_sequnlock(&xtime_lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * initialise the various timers used by the main part of the kernel
+ */
+void __init time_init(void)
+{
+ /* we need the prescalar running to be able to use IOCLK/8
+ * - IOCLK runs at 1/4 (ST5 open) or 1/8 (ST5 closed) internal CPU clock
+ * - IOCLK runs at Fosc rate (crystal speed)
+ */
+ TMPSCNT |= TMPSCNT_ENABLE;
+
+ startup_timestamp_counter();
+
+ printk(KERN_INFO
+ "timestamp counter I/O clock running at %lu.%02lu"
+ " (calibrated against RTC)\n",
+ MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100);
+
+ xtime.tv_sec = get_initial_rtc_time();
+ xtime.tv_nsec = 0;
+
+ mn10300_last_tsc = TMTSCBC;
+
+ /* use timer 0 & 1 cascaded to tick at as close to HZ as possible */
+ setup_irq(TMJCIRQ, &timer_irq);
+
+ set_intr_level(TMJCIRQ, TMJCICR_LEVEL);
+
+ startup_jiffies_counter();
+
+#ifdef CONFIG_MN10300_WD_TIMER
+ /* start the watchdog timer */
+ watchdog_go();
+#endif
+}
--- /dev/null
+/* MN10300 Exception handling
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/pci.h>
+#include <linux/kdebug.h>
+#include <linux/bug.h>
+#include <linux/irq.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/cpu-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/unit/leds.h>
+#include <asm/fpu.h>
+#include <asm/gdb-stub.h>
+#include <asm/sections.h>
+
+#if (CONFIG_INTERRUPT_VECTOR_BASE & 0xffffff)
+#error "INTERRUPT_VECTOR_BASE not aligned to 16MiB boundary!"
+#endif
+
+struct pt_regs *__frame; /* current frame pointer */
+EXPORT_SYMBOL(__frame);
+
+int kstack_depth_to_print = 24;
+
+spinlock_t die_lock = __SPIN_LOCK_UNLOCKED(die_lock);
+
+ATOMIC_NOTIFIER_HEAD(mn10300_die_chain);
+
+/*
+ * These constants are for searching for possible module text
+ * segments. MODULE_RANGE is a guess of how much space is likely
+ * to be vmalloced.
+ */
+#define MODULE_RANGE (8 * 1024 * 1024)
+
+#define DO_ERROR(signr, prologue, str, name) \
+asmlinkage void name(struct pt_regs *regs, u32 intcode) \
+{ \
+ prologue; \
+ if (die_if_no_fixup(str, regs, intcode)) \
+ return; \
+ force_sig(signr, current); \
+}
+
+#define DO_EINFO(signr, prologue, str, name, sicode) \
+asmlinkage void name(struct pt_regs *regs, u32 intcode) \
+{ \
+ siginfo_t info; \
+ prologue; \
+ if (die_if_no_fixup(str, regs, intcode)) \
+ return; \
+ info.si_signo = signr; \
+ if (signr == SIGILL && sicode == ILL_ILLOPC) { \
+ uint8_t opcode; \
+ if (get_user(opcode, (uint8_t __user *)regs->pc) == 0) \
+ if (opcode == 0xff) \
+ info.si_signo = SIGTRAP; \
+ } \
+ info.si_errno = 0; \
+ info.si_code = sicode; \
+ info.si_addr = (void *) regs->pc; \
+ force_sig_info(info.si_signo, &info, current); \
+}
+
+DO_ERROR(SIGTRAP, {}, "trap", trap);
+DO_ERROR(SIGSEGV, {}, "ibreak", ibreak);
+DO_ERROR(SIGSEGV, {}, "obreak", obreak);
+DO_EINFO(SIGSEGV, {}, "access error", access_error, SEGV_ACCERR);
+DO_EINFO(SIGSEGV, {}, "insn access error", insn_acc_error, SEGV_ACCERR);
+DO_EINFO(SIGSEGV, {}, "data access error", data_acc_error, SEGV_ACCERR);
+DO_EINFO(SIGILL, {}, "privileged opcode", priv_op, ILL_PRVOPC);
+DO_EINFO(SIGILL, {}, "invalid opcode", invalid_op, ILL_ILLOPC);
+DO_EINFO(SIGILL, {}, "invalid ex opcode", invalid_exop, ILL_ILLOPC);
+DO_EINFO(SIGBUS, {}, "invalid address", mem_error, BUS_ADRERR);
+DO_EINFO(SIGBUS, {}, "bus error", bus_error, BUS_ADRERR);
+DO_EINFO(SIGILL, {}, "FPU invalid opcode", fpu_invalid_op, ILL_COPROC);
+
+DO_ERROR(SIGTRAP,
+#ifndef CONFIG_MN10300_USING_JTAG
+ DCR &= ~0x0001,
+#else
+ {},
+#endif
+ "single step", istep);
+
+/*
+ * handle NMI
+ */
+asmlinkage void nmi(struct pt_regs *regs, enum exception_code code)
+{
+ /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_intercept(regs, code))
+ return;
+#endif
+
+ printk(KERN_WARNING "--- Register Dump ---\n");
+ show_registers(regs);
+ printk(KERN_WARNING "---------------------\n");
+}
+
+/*
+ * show a stack trace from the specified stack pointer
+ */
+void show_trace(unsigned long *sp)
+{
+ unsigned long *stack, addr, module_start, module_end;
+ int i;
+
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "Call Trace:");
+
+ stack = sp;
+ i = 0;
+ module_start = VMALLOC_START;
+ module_end = VMALLOC_END;
+
+ while (((long) stack & (THREAD_SIZE - 1)) != 0) {
+ addr = *stack++;
+ if (__kernel_text_address(addr)) {
+#if 1
+ printk(" [<%08lx>]", addr);
+ print_symbol(" %s", addr);
+ printk("\n");
+#else
+ if ((i % 6) == 0)
+ printk("\n" KERN_EMERG " ");
+ printk("[<%08lx>] ", addr);
+ i++;
+#endif
+ }
+ }
+
+ printk("\n");
+}
+
+/*
+ * show the raw stack from the specified stack pointer
+ */
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+ unsigned long *stack;
+ int i;
+
+ if (!sp)
+ sp = (unsigned long *) &sp;
+
+ stack = sp;
+ printk(KERN_EMERG "Stack:");
+ for (i = 0; i < kstack_depth_to_print; i++) {
+ if (((long) stack & (THREAD_SIZE - 1)) == 0)
+ break;
+ if ((i % 8) == 0)
+ printk("\n" KERN_EMERG " ");
+ printk("%08lx ", *stack++);
+ }
+
+ show_trace(sp);
+}
+
+/*
+ * the architecture-independent dump_stack generator
+ */
+void dump_stack(void)
+{
+ unsigned long stack;
+
+ show_stack(current, &stack);
+}
+EXPORT_SYMBOL(dump_stack);
+
+/*
+ * dump the register file in the specified exception frame
+ */
+void show_registers_only(struct pt_regs *regs)
+{
+ unsigned long ssp;
+
+ ssp = (unsigned long) regs + sizeof(*regs);
+
+ printk(KERN_EMERG "PC: %08lx EPSW: %08lx SSP: %08lx mode: %s\n",
+ regs->pc, regs->epsw, ssp, user_mode(regs) ? "User" : "Super");
+ printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
+ regs->d0, regs->d1, regs->d2, regs->d3);
+ printk(KERN_EMERG "a0: %08lx a1: %08lx a2: %08lx a3: %08lx\n",
+ regs->a0, regs->a1, regs->a2, regs->a3);
+ printk(KERN_EMERG "e0: %08lx e1: %08lx e2: %08lx e3: %08lx\n",
+ regs->e0, regs->e1, regs->e2, regs->e3);
+ printk(KERN_EMERG "e4: %08lx e5: %08lx e6: %08lx e7: %08lx\n",
+ regs->e4, regs->e5, regs->e6, regs->e7);
+ printk(KERN_EMERG "lar: %08lx lir: %08lx mdr: %08lx usp: %08lx\n",
+ regs->lar, regs->lir, regs->mdr, regs->sp);
+ printk(KERN_EMERG "cvf: %08lx crl: %08lx crh: %08lx drq: %08lx\n",
+ regs->mcvf, regs->mcrl, regs->mcrh, regs->mdrq);
+ printk(KERN_EMERG "threadinfo=%p task=%p)\n",
+ current_thread_info(), current);
+
+ if ((unsigned long) current >= 0x90000000UL &&
+ (unsigned long) current < 0x94000000UL)
+ printk(KERN_EMERG "Process %s (pid: %d)\n",
+ current->comm, current->pid);
+
+ printk(KERN_EMERG "CPUP: %04hx\n", CPUP);
+ printk(KERN_EMERG "TBR: %08x\n", TBR);
+ printk(KERN_EMERG "DEAR: %08x\n", DEAR);
+ printk(KERN_EMERG "sISR: %08x\n", sISR);
+ printk(KERN_EMERG "NMICR: %04hx\n", NMICR);
+ printk(KERN_EMERG "BCBERR: %08x\n", BCBERR);
+ printk(KERN_EMERG "BCBEAR: %08x\n", BCBEAR);
+ printk(KERN_EMERG "MMUFCR: %08x\n", MMUFCR);
+ printk(KERN_EMERG "IPTEU : %08x IPTEL2: %08x\n", IPTEU, IPTEL2);
+ printk(KERN_EMERG "DPTEU: %08x DPTEL2: %08x\n", DPTEU, DPTEL2);
+}
+
+/*
+ * dump the registers and the stack
+ */
+void show_registers(struct pt_regs *regs)
+{
+ unsigned long sp;
+ int i;
+
+ show_registers_only(regs);
+
+ if (!user_mode(regs))
+ sp = (unsigned long) regs + sizeof(*regs);
+ else
+ sp = regs->sp;
+
+ /* when in-kernel, we also print out the stack and code at the
+ * time of the fault..
+ */
+ if (!user_mode(regs)) {
+ printk(KERN_EMERG "\n");
+ show_stack(current, (unsigned long *) sp);
+
+#if 0
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "Code: ");
+ if (regs->pc < PAGE_OFFSET)
+ goto bad;
+
+ for (i = 0; i < 20; i++) {
+ unsigned char c;
+ if (__get_user(c, &((unsigned char *) regs->pc)[i]))
+ goto bad;
+ printk("%02x ", c);
+ }
+#else
+ i = 0;
+#endif
+ }
+
+ printk("\n");
+ return;
+
+#if 0
+bad:
+ printk(KERN_EMERG " Bad PC value.");
+ break;
+#endif
+}
+
+/*
+ *
+ */
+void show_trace_task(struct task_struct *tsk)
+{
+ unsigned long sp = tsk->thread.sp;
+
+ /* User space on another CPU? */
+ if ((sp ^ (unsigned long) tsk) & (PAGE_MASK << 1))
+ return;
+
+ show_trace((unsigned long *) sp);
+}
+
+/*
+ * note the untimely death of part of the kernel
+ */
+void die(const char *str, struct pt_regs *regs, enum exception_code code)
+{
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "%s: %04x\n",
+ str, code & 0xffff);
+ show_registers(regs);
+
+ if (regs->pc >= 0x02000000 && regs->pc < 0x04000000 &&
+ (regs->epsw & (EPSW_IM | EPSW_IE)) != (EPSW_IM | EPSW_IE)) {
+ printk(KERN_EMERG "Exception in usermode interrupt handler\n");
+ printk(KERN_EMERG "\n"
+ KERN_EMERG " Please connect to kernel debugger !!\n");
+ asm volatile ("0: bra 0b");
+ }
+
+ spin_unlock_irq(&die_lock);
+ do_exit(SIGSEGV);
+}
+
+/*
+ * see if there's a fixup handler we can force a jump to when an exception
+ * happens due to something kernel code did
+ */
+int die_if_no_fixup(const char *str, struct pt_regs *regs,
+ enum exception_code code)
+{
+ if (user_mode(regs))
+ return 0;
+
+ peripheral_leds_display_exception(code);
+
+ switch (code) {
+ /* see if we can fixup the kernel accessing memory */
+ case EXCEP_ITLBMISS:
+ case EXCEP_DTLBMISS:
+ case EXCEP_IAERROR:
+ case EXCEP_DAERROR:
+ case EXCEP_MEMERR:
+ case EXCEP_MISALIGN:
+ case EXCEP_BUSERROR:
+ case EXCEP_ILLDATACC:
+ case EXCEP_IOINSACC:
+ case EXCEP_PRIVINSACC:
+ case EXCEP_PRIVDATACC:
+ case EXCEP_DATINSACC:
+ if (fixup_exception(regs))
+ return 1;
+ case EXCEP_UNIMPINS:
+ if (regs->pc && *(uint8_t *)regs->pc == 0xff)
+ if (notify_die(DIE_BREAKPOINT, str, regs, code, 0, 0))
+ return 1;
+ break;
+ default:
+ break;
+ }
+
+ /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_intercept(regs, code))
+ return 1;
+#endif
+
+ if (notify_die(DIE_GPF, str, regs, code, 0, 0))
+ return 1;
+
+ /* make the process die as the last resort */
+ die(str, regs, code);
+}
+
+/*
+ * handle unsupported syscall instructions (syscall 1-15)
+ */
+static asmlinkage void unsupported_syscall(struct pt_regs *regs,
+ enum exception_code code)
+{
+ struct task_struct *tsk = current;
+ siginfo_t info;
+
+ /* catch a kernel BUG() */
+ if (code == EXCEP_SYSCALL15 && !user_mode(regs)) {
+ if (report_bug(regs->pc, regs) == BUG_TRAP_TYPE_BUG) {
+#ifdef CONFIG_GDBSTUB
+ __gdbstub_bug_trap();
+#endif
+ }
+ }
+
+ regs->pc -= 2; /* syscall return addr is _after_ the instruction */
+
+ die_if_no_fixup("An unsupported syscall insn was used by the kernel\n",
+ regs, code);
+
+ info.si_signo = SIGILL;
+ info.si_errno = ENOSYS;
+ info.si_code = ILL_ILLTRP;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGILL, &info, tsk);
+}
+
+/*
+ * display the register file when the stack pointer gets clobbered
+ */
+asmlinkage void do_double_fault(struct pt_regs *regs)
+{
+ struct task_struct *tsk = current;
+
+ strcpy(tsk->comm, "emergency tsk");
+ tsk->pid = 0;
+ console_verbose();
+ printk(KERN_EMERG "--- double fault ---\n");
+ show_registers(regs);
+}
+
+/*
+ * asynchronous bus error (external, usually I/O DMA)
+ */
+asmlinkage void io_bus_error(u32 bcberr, u32 bcbear, struct pt_regs *regs)
+{
+ console_verbose();
+
+ printk(KERN_EMERG "\n"
+ KERN_EMERG "Asynchronous I/O Bus Error\n"
+ KERN_EMERG "==========================\n");
+
+ if (bcberr & BCBERR_BEME)
+ printk(KERN_EMERG "- Multiple recorded errors\n");
+
+ printk(KERN_EMERG "- Faulting Buses:%s%s%s\n",
+ bcberr & BCBERR_BEMR_CI ? " CPU-Ins-Fetch" : "",
+ bcberr & BCBERR_BEMR_CD ? " CPU-Data" : "",
+ bcberr & BCBERR_BEMR_DMA ? " DMA" : "");
+
+ printk(KERN_EMERG "- %s %s access made to %s at address %08x\n",
+ bcberr & BCBERR_BEBST ? "Burst" : "Single",
+ bcberr & BCBERR_BERW ? "Read" : "Write",
+ bcberr & BCBERR_BESB_MON ? "Monitor Space" :
+ bcberr & BCBERR_BESB_IO ? "Internal CPU I/O Space" :
+ bcberr & BCBERR_BESB_EX ? "External I/O Bus" :
+ bcberr & BCBERR_BESB_OPEX ? "External Memory Bus" :
+ "On Chip Memory",
+ bcbear
+ );
+
+ printk(KERN_EMERG "- Detected by the %s\n",
+ bcberr&BCBERR_BESD ? "Bus Control Unit" : "Slave Bus");
+
+#ifdef CONFIG_PCI
+#define BRIDGEREGB(X) (*(volatile __u8 *)(0xBE040000 + (X)))
+#define BRIDGEREGW(X) (*(volatile __u16 *)(0xBE040000 + (X)))
+#define BRIDGEREGL(X) (*(volatile __u32 *)(0xBE040000 + (X)))
+
+ printk(KERN_EMERG "- PCI Memory Paging Reg: %08x\n",
+ *(volatile __u32 *) (0xBFFFFFF4));
+ printk(KERN_EMERG "- PCI Bridge Base Address 0: %08x\n",
+ BRIDGEREGL(PCI_BASE_ADDRESS_0));
+ printk(KERN_EMERG "- PCI Bridge AMPCI Base Address: %08x\n",
+ BRIDGEREGL(0x48));
+ printk(KERN_EMERG "- PCI Bridge Command: %04hx\n",
+ BRIDGEREGW(PCI_COMMAND));
+ printk(KERN_EMERG "- PCI Bridge Status: %04hx\n",
+ BRIDGEREGW(PCI_STATUS));
+ printk(KERN_EMERG "- PCI Bridge Int Status: %08hx\n",
+ BRIDGEREGL(0x4c));
+#endif
+
+ printk(KERN_EMERG "\n");
+ show_registers(regs);
+
+ panic("Halted due to asynchronous I/O Bus Error\n");
+}
+
+/*
+ * handle an exception for which a handler has not yet been installed
+ */
+asmlinkage void uninitialised_exception(struct pt_regs *regs,
+ enum exception_code code)
+{
+
+ /* see if gdbstub wants to deal with it */
+#ifdef CONFIG_GDBSTUB
+ if (gdbstub_intercept(regs, code))
+ return;
+#endif
+
+ peripheral_leds_display_exception(code);
+ printk(KERN_EMERG "Uninitialised Exception 0x%04x\n", code & 0xFFFF);
+ show_registers(regs);
+
+ for (;;)
+ continue;
+}
+
+/*
+ * set an interrupt stub to jump to a handler
+ * ! NOTE: this does *not* flush the caches
+ */
+void __init __set_intr_stub(enum exception_code code, void *handler)
+{
+ unsigned long addr;
+ u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+ addr = (unsigned long) handler - (unsigned long) vector;
+ vector[0] = 0xdc; /* JMP handler */
+ vector[1] = addr;
+ vector[2] = addr >> 8;
+ vector[3] = addr >> 16;
+ vector[4] = addr >> 24;
+ vector[5] = 0xcb;
+ vector[6] = 0xcb;
+ vector[7] = 0xcb;
+}
+
+/*
+ * set an interrupt stub to jump to a handler
+ */
+void __init set_intr_stub(enum exception_code code, void *handler)
+{
+ unsigned long addr;
+ u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+ addr = (unsigned long) handler - (unsigned long) vector;
+ vector[0] = 0xdc; /* JMP handler */
+ vector[1] = addr;
+ vector[2] = addr >> 8;
+ vector[3] = addr >> 16;
+ vector[4] = addr >> 24;
+ vector[5] = 0xcb;
+ vector[6] = 0xcb;
+ vector[7] = 0xcb;
+
+ mn10300_dcache_flush_inv();
+ mn10300_icache_inv();
+}
+
+/*
+ * set an interrupt stub to invoke the JTAG unit and then jump to a handler
+ */
+void __init set_jtag_stub(enum exception_code code, void *handler)
+{
+ unsigned long addr;
+ u8 *vector = (u8 *)(CONFIG_INTERRUPT_VECTOR_BASE + code);
+
+ addr = (unsigned long) handler - ((unsigned long) vector + 1);
+ vector[0] = 0xff; /* PI to jump into JTAG debugger */
+ vector[1] = 0xdc; /* jmp handler */
+ vector[2] = addr;
+ vector[3] = addr >> 8;
+ vector[4] = addr >> 16;
+ vector[5] = addr >> 24;
+ vector[6] = 0xcb;
+ vector[7] = 0xcb;
+
+ mn10300_dcache_flush_inv();
+ flush_icache_range((unsigned long) vector, (unsigned long) vector + 8);
+}
+
+/*
+ * initialise the exception table
+ */
+void __init trap_init(void)
+{
+ set_excp_vector(EXCEP_TRAP, trap);
+ set_excp_vector(EXCEP_ISTEP, istep);
+ set_excp_vector(EXCEP_IBREAK, ibreak);
+ set_excp_vector(EXCEP_OBREAK, obreak);
+
+ set_excp_vector(EXCEP_PRIVINS, priv_op);
+ set_excp_vector(EXCEP_UNIMPINS, invalid_op);
+ set_excp_vector(EXCEP_UNIMPEXINS, invalid_exop);
+ set_excp_vector(EXCEP_MEMERR, mem_error);
+ set_excp_vector(EXCEP_MISALIGN, misalignment);
+ set_excp_vector(EXCEP_BUSERROR, bus_error);
+ set_excp_vector(EXCEP_ILLINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_ILLDATACC, data_acc_error);
+ set_excp_vector(EXCEP_IOINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_PRIVINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_PRIVDATACC, data_acc_error);
+ set_excp_vector(EXCEP_DATINSACC, insn_acc_error);
+ set_excp_vector(EXCEP_FPU_DISABLED, fpu_disabled);
+ set_excp_vector(EXCEP_FPU_UNIMPINS, fpu_invalid_op);
+ set_excp_vector(EXCEP_FPU_OPERATION, fpu_exception);
+
+ set_excp_vector(EXCEP_NMI, nmi);
+
+ set_excp_vector(EXCEP_SYSCALL1, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL2, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL3, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL4, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL5, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL6, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL7, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL8, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL9, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL10, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL11, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL12, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL13, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL14, unsupported_syscall);
+ set_excp_vector(EXCEP_SYSCALL15, unsupported_syscall);
+}
+
+/*
+ * determine if a program counter value is a valid bug address
+ */
+int is_valid_bugaddr(unsigned long pc)
+{
+ return pc >= PAGE_OFFSET;
+}
--- /dev/null
+/* MN10300 Main kernel linker script
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#define __VMLINUX_LDS__
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
+
+OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
+OUTPUT_ARCH(mn10300)
+ENTRY(_start)
+jiffies = jiffies_64;
+#ifndef CONFIG_MN10300_CURRENT_IN_E2
+current = __current;
+#endif
+SECTIONS
+{
+ . = CONFIG_KERNEL_TEXT_ADDRESS;
+ /* read-only */
+ _stext = .;
+ _text = .; /* Text and read-only data */
+ .text : {
+ *(
+ .text.head
+ .text
+ )
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ } = 0xcb
+
+ _etext = .; /* End of text section */
+
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ BUG_TABLE
+
+ RODATA
+
+ /* writeable */
+ .data : { /* Data */
+ DATA_DATA
+ CONSTRUCTORS
+ }
+
+ . = ALIGN(4096);
+ __nosave_begin = .;
+ .data_nosave : { *(.data.nosave) }
+ . = ALIGN(4096);
+ __nosave_end = .;
+
+ . = ALIGN(4096);
+ .data.page_aligned : { *(.data.idt) }
+
+ . = ALIGN(32);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+ /* rarely changed data like cpu maps */
+ . = ALIGN(32);
+ .data.read_mostly : AT(ADDR(.data.read_mostly)) {
+ *(.data.read_mostly)
+ _edata = .; /* End of data section */
+ }
+
+ . = ALIGN(THREAD_SIZE); /* init_task */
+ .data.init_task : { *(.data.init_task) }
+
+ /* might get freed after init */
+ . = ALIGN(4096);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ }
+
+ /* will be freed after init */
+ . = ALIGN(4096); /* Init code and data */
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+ .init.data : { *(.init.data) }
+ . = ALIGN(16);
+ __setup_start = .;
+ .setup.init : { KEEP(*(.init.setup)) }
+ __setup_end = .;
+
+ __initcall_start = .;
+ .initcall.init : {
+ INITCALLS
+ }
+ __initcall_end = .;
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
+
+ SECURITY_INIT
+ . = ALIGN(4);
+ __alt_instructions = .;
+ .altinstructions : { *(.altinstructions) }
+ __alt_instructions_end = .;
+ .altinstr_replacement : { *(.altinstr_replacement) }
+ /* .exit.text is discard at runtime, not link time, to deal with references
+ from .altinstructions and .eh_frame */
+ .exit.text : { *(.exit.text) }
+ .exit.data : { *(.exit.data) }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(4096);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
+#endif
+
+ . = ALIGN(32);
+ __per_cpu_start = .;
+ .data.percpu : { *(.data.percpu) }
+ __per_cpu_end = .;
+ . = ALIGN(4096);
+ __init_end = .;
+ /* freed after init ends here */
+
+ __bss_start = .; /* BSS */
+ .bss : {
+ *(.bss.page_aligned)
+ *(.bss)
+ }
+ . = ALIGN(4);
+ __bss_stop = .;
+
+ _end = . ;
+
+ /* This is where the kernel creates the early boot page tables */
+ . = ALIGN(4096);
+ pg0 = .;
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ }
+
+ STABS_DEBUG
+
+ DWARF_DEBUG
+}
--- /dev/null
+#
+# Makefile for the MN10300-specific library files..
+#
+
+lib-y = delay.o usercopy.o checksum.o bitops.o memcpy.o memmove.o memset.o
+lib-y += do_csum.o
+lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o
--- /dev/null
+/* MN10300 64-bit arithmetic left shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __ashldi3(unsigned long long value [D1:D0],
+# unsigned by [(12,SP)])
+#
+###############################################################################
+ .globl __ashldi3
+ .type __ashldi3,@function
+__ashldi3:
+ mov (12,sp),a0
+ and +63,a0
+ beq __ashldi3_zero
+
+ cmp +31,a0
+ bhi __ashldi3_32plus
+
+ # the count is in the range 1-31
+ asl a0,d1
+
+ mov +32,a1
+ sub a0,a1,a1 # a1 = 32 - count
+ lsr a1,d0,a1 # get overflow from LSW -> MSW
+
+ or_asl a1,d1,a0,d0 # insert overflow into MSW and
+ # shift the LSW
+ rets
+
+ .balign L1_CACHE_BYTES
+ # the count is in the range 32-63
+__ashldi3_32plus:
+ asl a0,d0,d1
+ clr d0
+__ashldi3_zero:
+ rets
+
+ .size __ashldi3, .-__ashldi3
--- /dev/null
+/* MN10300 64-bit arithmetic right shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __ashrdi3(unsigned long long value [D1:D0],
+# unsigned by [(12,SP)])
+#
+###############################################################################
+ .globl __ashrdi3
+ .type __ashrdi3,@function
+__ashrdi3:
+ mov (12,sp),a0
+ and +63,a0
+ beq __ashrdi3_zero
+
+ cmp +31,a0
+ bhi __ashrdi3_32plus
+
+ # the count is in the range 1-31
+ lsr a0,d0
+
+ mov +32,a1
+ sub a0,a1,a1 # a1 = 32 - count
+ asl a1,d1,a1 # get underflow from MSW -> LSW
+
+ or_asr a1,d0,a0,d1 # insert underflow into LSW and
+ # shift the MSW
+ rets
+
+ .balign L1_CACHE_BYTES
+ # the count is in the range 32-63
+__ashrdi3_32plus:
+ asr a0,d1,d0
+ ext d0 # sign-extend result through MDR
+ mov mdr,d1
+__ashrdi3_zero:
+ rets
+
+ .size __ashrdi3, .-__ashrdi3
--- /dev/null
+/* MN10300 64-bit logical right shift
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <asm/cache.h>
+
+ .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned long long __lshrdi3(unsigned long long value [D1:D0],
+# unsigned by [(12,SP)])
+#
+###############################################################################
+ .globl __lshrdi3
+ .type __lshrdi3,@function
+__lshrdi3:
+ mov (12,sp),a0
+ and +63,a0
+ beq __lshrdi3_zero
+
+ cmp +31,a0
+ bhi __lshrdi3_32plus
+
+ # the count is in the range 1-31
+ lsr a0,d0
+
+ mov +32,a1
+ sub a0,a1,a1 # a1 = 32 - count
+ asl a1,d1,a1 # get underflow from MSW -> LSW
+
+ or_lsr a1,d0,a0,d1 # insert underflow into LSW and
+ # shift the MSW
+ rets
+
+ .balign L1_CACHE_BYTES
+ # the count is in the range 32-63
+__lshrdi3_32plus:
+ lsr a0,d1,d0
+ clr d1
+__lshrdi3_zero:
+ rets
+
+ .size __lshrdi3, .-__lshrdi3
--- /dev/null
+/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__((mode(SI)));
+typedef unsigned int USItype __attribute__((mode(SI)));
+typedef int DItype __attribute__((mode(DI)));
+typedef int word_type __attribute__((mode(__word__)));
+
+struct DIstruct {
+ SItype low;
+ SItype high;
+};
+
+union DIunion {
+ struct DIstruct s;
+ DItype ll;
+};
+
+DItype __ashrdi3(DItype u, word_type b)
+{
+ union DIunion w;
+ union DIunion uu;
+ word_type bm;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high = uu.s.high >> (sizeof(SItype) * BITS_PER_UNIT - 1);
+ w.s.low = uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype)uu.s.high << bm;
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((USItype)uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
--- /dev/null
+/* MN10300 Non-trivial bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/bitops.h>
+#include <asm/system.h>
+
+/*
+ * try flipping a bit using BSET and BCLR
+ */
+void change_bit(int nr, volatile void *addr)
+{
+ if (test_bit(nr, addr))
+ goto try_clear_bit;
+
+try_set_bit:
+ if (!test_and_set_bit(nr, addr))
+ return;
+
+try_clear_bit:
+ if (test_and_clear_bit(nr, addr))
+ return;
+
+ goto try_set_bit;
+}
+
+/*
+ * try flipping a bit using BSET and BCLR and returning the old value
+ */
+int test_and_change_bit(int nr, volatile void *addr)
+{
+ if (test_bit(nr, addr))
+ goto try_clear_bit;
+
+try_set_bit:
+ if (!test_and_set_bit(nr, addr))
+ return 0;
+
+try_clear_bit:
+ if (test_and_clear_bit(nr, addr))
+ return 1;
+
+ goto try_set_bit;
+}
--- /dev/null
+/* MN10300 Optimised checksumming wrappers
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+#include <asm/checksum.h>
+#include "internal.h"
+
+static inline unsigned short from32to16(__wsum sum)
+{
+ asm(" add %1,%0 \n"
+ " addc 0xffff,%0 \n"
+ : "=r" (sum)
+ : "r" (sum << 16), "0" (sum & 0xffff0000)
+ );
+ return sum >> 16;
+}
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ return ~do_csum(iph, ihl * 4);
+}
+EXPORT_SYMBOL(ip_fast_csum);
+
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+ __wsum result;
+
+ result = do_csum(buff, len);
+ result += sum;
+ if (sum > result)
+ result++;
+ return result;
+}
+EXPORT_SYMBOL(csum_partial);
+
+__sum16 ip_compute_csum(const void *buff, int len)
+{
+ return ~from32to16(do_csum(buff, len));
+}
+EXPORT_SYMBOL(ip_compute_csum);
+
+__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
+{
+ copy_from_user(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy);
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum)
+{
+ sum = csum_partial(src, len, sum);
+ memcpy(dst, src, len);
+ return sum;
+}
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+
+__wsum csum_partial_copy_from_user(const void *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr)
+{
+ int missing;
+
+ missing = copy_from_user(dst, src, len);
+ if (missing) {
+ memset(dst + len - missing, 0, missing);
+ *err_ptr = -EFAULT;
+ }
+
+ return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+__wsum csum_and_copy_to_user(const void *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr)
+{
+ int missing;
+
+ missing = copy_to_user(dst, src, len);
+ if (missing) {
+ memset(dst + len - missing, 0, missing);
+ *err_ptr = -EFAULT;
+ }
+
+ return csum_partial(src, len, sum);
+}
+EXPORT_SYMBOL(csum_and_copy_to_user);
--- /dev/null
+/* MN10300 Short delay interpolation routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+
+/*
+ * basic delay loop
+ */
+void __delay(unsigned long loops)
+{
+ int d0;
+
+ asm volatile(
+ " bra 1f \n"
+ " .align 4 \n"
+ "1: bra 2f \n"
+ " .align 4 \n"
+ "2: add -1,%0 \n"
+ " bne 2b \n"
+ : "=&d" (d0)
+ : "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * handle a delay specified in terms of microseconds
+ */
+void __udelay(unsigned long usecs)
+{
+ signed long ioclk, stop;
+
+ /* usecs * CLK / 1E6 */
+ stop = __muldiv64u(usecs, MN10300_TSCCLK, 1000000);
+ stop = TMTSCBC - stop;
+
+ do {
+ ioclk = TMTSCBC;
+ } while (stop < ioclk);
+}
+EXPORT_SYMBOL(__udelay);
--- /dev/null
+/* Optimised simple memory checksum
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# unsigned int do_csum(const unsigned char *buff, size_t len)
+#
+###############################################################################
+ .globl do_csum
+ .type do_csum,@function
+do_csum:
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov d1,d2 # count
+ mov d0,a0 # buff
+ clr d1 # accumulator
+
+ cmp +0,d2
+ beq do_csum_done # return if zero-length buffer
+
+ # 4-byte align the buffer pointer
+ btst +3,a0
+ beq do_csum_now_4b_aligned
+
+ btst +1,a0
+ beq do_csum_addr_not_odd
+ movbu (a0),d0
+ inc a0
+ asl +8,d0
+ add d0,d1
+ addc +0,d1
+ add -1,d2
+do_csum_addr_not_odd:
+
+ cmp +2,d2
+ bcs do_csum_fewer_than_4
+ btst +2,a0
+ beq do_csum_now_4b_aligned
+ movhu (a0+),d0
+ add d0,d1
+ addc +0,d1
+ add -2,d2
+ cmp +4,d2
+ bcs do_csum_fewer_than_4
+
+do_csum_now_4b_aligned:
+ # we want to checksum as much as we can in chunks of 32 bytes
+ cmp +31,d2
+ bls do_csum_remainder # 4-byte aligned remainder
+
+ add -32,d2
+ mov +32,d3
+
+do_csum_loop:
+ mov (a0+),d0
+ add d0,d1
+ mov (a0+),e0
+ addc e0,d1
+ mov (a0+),e1
+ addc e1,d1
+ mov (a0+),e3
+ addc e3,d1
+ mov (a0+),d0
+ addc d0,d1
+ mov (a0+),e0
+ addc e0,d1
+ mov (a0+),e1
+ addc e1,d1
+ mov (a0+),e3
+ addc e3,d1
+ addc +0,d1
+
+ sub d3,d2
+ bcc do_csum_loop
+
+ add d3,d2
+ beq do_csum_done
+
+do_csum_remainder:
+ # cut 16-31 bytes down to 0-15
+ cmp +16,d2
+ bcs do_csum_fewer_than_16
+ mov (a0+),d0
+ add d0,d1
+ mov (a0+),e0
+ addc e0,d1
+ mov (a0+),e1
+ addc e1,d1
+ mov (a0+),e3
+ addc e3,d1
+ addc +0,d1
+ add -16,d2
+ beq do_csum_done
+
+do_csum_fewer_than_16:
+ # copy the remaining whole words
+ cmp +4,d2
+ bcs do_csum_fewer_than_4
+ cmp +8,d2
+ bcs do_csum_one_word
+ cmp +12,d2
+ bcs do_csum_two_words
+ mov (a0+),d0
+ add d0,d1
+ addc +0,d1
+do_csum_two_words:
+ mov (a0+),d0
+ add d0,d1
+ addc +0,d1
+do_csum_one_word:
+ mov (a0+),d0
+ add d0,d1
+ addc +0,d1
+
+do_csum_fewer_than_4:
+ and +3,d2
+ beq do_csum_done
+ xor_cmp d0,d0,+2,d2
+ bcs do_csum_fewer_than_2
+ movhu (a0+),d0
+do_csum_fewer_than_2:
+ and +1,d2
+ beq do_csum_add_last_bit
+ movbu (a0),d3
+ add d3,d0
+do_csum_add_last_bit:
+ add d0,d1
+ addc +0,d1
+
+do_csum_done:
+ # compress the checksum down to 16 bits
+ mov +0xffff0000,d2
+ and d1,d2
+ asl +16,d1
+ add d2,d1,d0
+ addc +0xffff,d0
+ lsr +16,d0
+
+ # flip the halves of the word result if the buffer was oddly aligned
+ mov (12,sp),d1
+ and +1,d1
+ beq do_csum_not_oddly_aligned
+ swaph d0,d0 # exchange bits 15:8 with 7:0
+
+do_csum_not_oddly_aligned:
+ ret [d2,d3],8
+
+do_csum_end:
+ .size do_csum, do_csum_end-do_csum
--- /dev/null
+/* Internal definitions for the arch part of the kernel library
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * do_csum.S
+ */
+extern unsigned int do_csum(const unsigned char *, size_t);
--- /dev/null
+/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#define BITS_PER_UNIT 8
+
+typedef int SItype __attribute__((mode(SI)));
+typedef unsigned int USItype __attribute__((mode(SI)));
+typedef int DItype __attribute__((mode(DI)));
+typedef int word_type __attribute__((mode(__word__)));
+
+struct DIstruct {
+ SItype low;
+ SItype high;
+};
+
+union DIunion {
+ struct DIstruct s;
+ DItype ll;
+};
+
+DItype __lshrdi3(DItype u, word_type b)
+{
+ union DIunion w;
+ word_type bm;
+ union DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(SItype) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ w.s.high = 0;
+ w.s.low = (USItype) uu.s.high >> -bm;
+ } else {
+ USItype carries = (USItype) uu.s.high << bm;
+ w.s.high = (USItype) uu.s.high >> b;
+ w.s.low = ((USItype) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
+}
--- /dev/null
+/* MN10300 Optimised simple memory to memory copy
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memcpy(void *dst, const void *src, size_t n)
+#
+###############################################################################
+ .globl memcpy
+ .type memcpy,@function
+memcpy:
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov (20,sp),d2 # count
+ mov d0,a0 # dst
+ mov d1,a1 # src
+ mov d0,e3 # the return value
+
+ cmp +0,d2
+ beq memcpy_done # return if zero-length copy
+
+ # see if the three parameters are all four-byte aligned
+ or d0,d1,d3
+ or d2,d3
+ and +3,d3
+ bne memcpy_1 # jump if not
+
+ # we want to transfer as much as we can in chunks of 32 bytes
+ cmp +31,d2
+ bls memcpy_4_remainder # 4-byte aligned remainder
+
+ movm [exreg1],(sp)
+ add -32,d2
+ mov +32,d3
+
+memcpy_4_loop:
+ mov (a1+),d0
+ mov (a1+),d1
+ mov (a1+),e0
+ mov (a1+),e1
+ mov (a1+),e4
+ mov (a1+),e5
+ mov (a1+),e6
+ mov (a1+),e7
+ mov d0,(a0+)
+ mov d1,(a0+)
+ mov e0,(a0+)
+ mov e1,(a0+)
+ mov e4,(a0+)
+ mov e5,(a0+)
+ mov e6,(a0+)
+ mov e7,(a0+)
+
+ sub d3,d2
+ bcc memcpy_4_loop
+
+ movm (sp),[exreg1]
+ add d3,d2
+ beq memcpy_4_no_remainder
+
+memcpy_4_remainder:
+ # cut 4-7 words down to 0-3
+ cmp +16,d2
+ bcs memcpy_4_three_or_fewer_words
+ mov (a1+),d0
+ mov (a1+),d1
+ mov (a1+),e0
+ mov (a1+),e1
+ mov d0,(a0+)
+ mov d1,(a0+)
+ mov e0,(a0+)
+ mov e1,(a0+)
+ add -16,d2
+ beq memcpy_4_no_remainder
+
+ # copy the remaining 1, 2 or 3 words
+memcpy_4_three_or_fewer_words:
+ cmp +8,d2
+ bcs memcpy_4_one_word
+ beq memcpy_4_two_words
+ mov (a1+),d0
+ mov d0,(a0+)
+memcpy_4_two_words:
+ mov (a1+),d0
+ mov d0,(a0+)
+memcpy_4_one_word:
+ mov (a1+),d0
+ mov d0,(a0+)
+
+memcpy_4_no_remainder:
+ # check we copied the correct amount
+ # TODO: REMOVE CHECK
+ sub e3,a0,d2
+ mov (20,sp),d1
+ cmp d2,d1
+ beq memcpy_done
+ break
+ break
+ break
+
+memcpy_done:
+ mov e3,a0
+ ret [d2,d3],8
+
+ # handle misaligned copying
+memcpy_1:
+ add -1,d2
+ mov +1,d3
+ setlb # setlb requires the next insns
+ # to occupy exactly 4 bytes
+
+ sub d3,d2
+ movbu (a1),d0
+ movbu d0,(a0)
+ add_add d3,a1,d3,a0
+ lcc
+
+ mov e3,a0
+ ret [d2,d3],8
+
+memcpy_end:
+ .size memcpy, memcpy_end-memcpy
--- /dev/null
+/* MN10300 Optimised simple memory to memory copy, with support for overlapping
+ * regions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memmove(void *dst, const void *src, size_t n)
+#
+###############################################################################
+ .globl memmove
+ .type memmove,@function
+memmove:
+ # fall back to memcpy if dst < src to work bottom up
+ cmp d1,d0
+ bcs memmove_memcpy
+
+ # work top down
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov (20,sp),d2 # count
+ add d0,d2,a0 # dst end
+ add d1,d2,a1 # src end
+ mov d0,e3 # the return value
+
+ cmp +0,d2
+ beq memmove_done # return if zero-length copy
+
+ # see if the three parameters are all four-byte aligned
+ or d0,d1,d3
+ or d2,d3
+ and +3,d3
+ bne memmove_1 # jump if not
+
+ # we want to transfer as much as we can in chunks of 32 bytes
+ add -4,a1
+ cmp +31,d2
+ bls memmove_4_remainder # 4-byte aligned remainder
+
+ add -32,d2
+ mov +32,d3
+
+memmove_4_loop:
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+
+ sub d3,d2
+ bcc memmove_4_loop
+
+ add d3,d2
+ beq memmove_4_no_remainder
+
+memmove_4_remainder:
+ # cut 4-7 words down to 0-3
+ cmp +16,d2
+ bcs memmove_4_three_or_fewer_words
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+ mov (a1),d1
+ sub_sub +4,a1,+4,a0
+ mov d1,(a0)
+ mov (a1),e0
+ sub_sub +4,a1,+4,a0
+ mov e0,(a0)
+ mov (a1),e1
+ sub_sub +4,a1,+4,a0
+ mov e1,(a0)
+ add -16,d2
+ beq memmove_4_no_remainder
+
+ # copy the remaining 1, 2 or 3 words
+memmove_4_three_or_fewer_words:
+ cmp +8,d2
+ bcs memmove_4_one_word
+ beq memmove_4_two_words
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+memmove_4_two_words:
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+memmove_4_one_word:
+ mov (a1),d0
+ sub_sub +4,a1,+4,a0
+ mov d0,(a0)
+
+memmove_4_no_remainder:
+ # check we copied the correct amount
+ # TODO: REMOVE CHECK
+ sub e3,a0,d2
+ beq memmove_done
+ break
+ break
+ break
+
+memmove_done:
+ mov e3,a0
+ ret [d2,d3],8
+
+ # handle misaligned copying
+memmove_1:
+ add -1,a1
+ add -1,d2
+ mov +1,d3
+ setlb # setlb requires the next insns
+ # to occupy exactly 4 bytes
+
+ sub d3,d2
+ movbu (a1),d0
+ sub_sub d3,a1,d3,a0
+ movbu d0,(a0)
+ lcc
+
+ mov e3,a0
+ ret [d2,d3],8
+
+memmove_memcpy:
+ jmp memcpy
+
+memmove_end:
+ .size memmove, memmove_end-memmove
--- /dev/null
+/* Optimised simple memory fill
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/cache.h>
+
+ .section .text
+ .balign L1_CACHE_BYTES
+
+###############################################################################
+#
+# void *memset(void *dst, int c, size_t n)
+#
+###############################################################################
+ .globl memset
+ .type memset,@function
+memset:
+ movm [d2,d3],(sp)
+ mov d0,(12,sp)
+ mov d1,(16,sp)
+ mov (20,sp),d2 # count
+ mov d0,a0 # dst
+ mov d0,e3 # the return value
+
+ cmp +0,d2
+ beq memset_done # return if zero-length fill
+
+ # see if the region parameters are four-byte aligned
+ or d0,d2,d3
+ and +3,d3
+ bne memset_1 # jump if not
+
+ extbu d1
+ mov_asl d1,d3,8,d1
+ or_asl d1,d3,8,d1
+ or_asl d1,d3,8,d1
+ or d3,d1
+
+ # we want to transfer as much as we can in chunks of 32 bytes
+ cmp +31,d2
+ bls memset_4_remainder # 4-byte aligned remainder
+
+ add -32,d2
+ mov +32,d3
+
+memset_4_loop:
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+
+ sub d3,d2
+ bcc memset_4_loop
+
+ add d3,d2
+ beq memset_4_no_remainder
+
+memset_4_remainder:
+ # cut 4-7 words down to 0-3
+ cmp +16,d2
+ bcs memset_4_three_or_fewer_words
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ mov d1,(a0+)
+ add -16,d2
+ beq memset_4_no_remainder
+
+ # copy the remaining 1, 2 or 3 words
+memset_4_three_or_fewer_words:
+ cmp +8,d2
+ bcs memset_4_one_word
+ beq memset_4_two_words
+ mov d1,(a0+)
+memset_4_two_words:
+ mov d1,(a0+)
+memset_4_one_word:
+ mov d1,(a0+)
+
+memset_4_no_remainder:
+ # check we set the correct amount
+ # TODO: REMOVE CHECK
+ sub e3,a0,d2
+ mov (20,sp),d1
+ cmp d2,d1
+ beq memset_done
+ break
+ break
+ break
+
+memset_done:
+ mov e3,a0
+ ret [d2,d3],8
+
+ # handle misaligned copying
+memset_1:
+ add -1,d2
+ mov +1,d3
+ setlb # setlb requires the next insns
+ # to occupy exactly 4 bytes
+
+ sub d3,d2
+ movbu d1,(a0)
+ inc a0
+ lcc
+
+ mov e3,a0
+ ret [d2,d3],8
+
+memset_end:
+ .size memset, memset_end-memset
--- /dev/null
+/* More subroutines needed by GCC output code on some machines. */
+/* Compile this one with gcc. */
+/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001 Free Software Foundation, Inc.
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public Licence as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+In addition to the permissions in the GNU General Public Licence, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public Licence restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public Licence for more details.
+
+You should have received a copy of the GNU General Public Licence
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+/* It is incorrect to include config.h here, because this file is being
+ compiled for the target, and hence definitions concerning only the host
+ do not apply. */
+
+#include <linux/types.h>
+
+union DWunion {
+ s64 ll;
+ struct {
+ s32 low;
+ s32 high;
+ } s;
+};
+
+s64 __negdi2(s64 u)
+{
+ union DWunion w;
+ union DWunion uu;
+
+ uu.ll = u;
+
+ w.s.low = -uu.s.low;
+ w.s.high = -uu.s.high - ((u32) w.s.low > 0);
+
+ return w.ll;
+}
--- /dev/null
+/* MN10300 Userspace accessor functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <asm/uaccess.h>
+
+unsigned long
+__generic_copy_to_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __copy_user(to, from, n);
+ return n;
+}
+
+unsigned long
+__generic_copy_from_user(void *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ __copy_user_zeroing(to, from, n);
+ return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+#define __do_strncpy_from_user(dst, src, count, res) \
+do { \
+ int w; \
+ asm volatile( \
+ " mov %1,%0\n" \
+ " cmp 0,%1\n" \
+ " beq 2f\n" \
+ "0:\n" \
+ " movbu (%5),%2\n" \
+ "1:\n" \
+ " movbu %2,(%6)\n" \
+ " inc %5\n" \
+ " inc %6\n" \
+ " cmp 0,%2\n" \
+ " beq 2f\n" \
+ " add -1,%1\n" \
+ " bne 0b\n" \
+ "2:\n" \
+ " sub %1,%0\n" \
+ "3:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "4:\n" \
+ " mov %3,%0\n" \
+ " jmp 3b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,4b\n" \
+ " .long 1b,4b\n" \
+ " .previous" \
+ :"=&r"(res), "=r"(count), "=&r"(w) \
+ :"i"(-EFAULT), "1"(count), "a"(src), "a"(dst) \
+ :"memory"); \
+} while (0)
+
+long
+__strncpy_from_user(char *dst, const char *src, long count)
+{
+ long res;
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+ long res = -EFAULT;
+ if (access_ok(VERIFY_READ, src, 1))
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+
+/*
+ * Clear a userspace memory
+ */
+#define __do_clear_user(addr, size) \
+do { \
+ int w; \
+ asm volatile( \
+ " cmp 0,%0\n" \
+ " beq 1f\n" \
+ " clr %1\n" \
+ "0: movbu %1,(%3,%2)\n" \
+ " inc %3\n" \
+ " cmp %0,%3\n" \
+ " bne 0b\n" \
+ "1:\n" \
+ " sub %3,%0\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ ".previous\n" \
+ : "+r"(size), "=&r"(w) \
+ : "a"(addr), "d"(0) \
+ : "memory"); \
+} while (0)
+
+unsigned long
+__clear_user(void *to, unsigned long n)
+{
+ __do_clear_user(to, n);
+ return n;
+}
+
+unsigned long
+clear_user(void *to, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __do_clear_user(to, n);
+ return n;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+long strnlen_user(const char *s, long n)
+{
+ unsigned long res, w;
+
+ if (!__addr_ok(s))
+ return 0;
+
+ if (n < 0 || n + (u_long) s > current_thread_info()->addr_limit.seg)
+ n = current_thread_info()->addr_limit.seg - (u_long)s;
+
+ asm volatile(
+ "0: cmp %4,%0\n"
+ " beq 2f\n"
+ "1: movbu (%0,%3),%1\n"
+ " inc %0\n"
+ " cmp 0,%1\n"
+ " beq 3f\n"
+ " bra 0b\n"
+ "2: clr %0\n"
+ "3:\n"
+ ".section .fixup,\"ax\"\n"
+ "4: jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .balign 4\n"
+ " .long 1b,4b\n"
+ ".previous\n"
+ :"=d"(res), "=&r"(w)
+ :"0"(0), "a"(s), "r"(n)
+ :"memory");
+ return res;
+}
--- /dev/null
+#
+# Makefile for the MN10300-specific memory management code
+#
+
+obj-y := \
+ init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
+ misalignment.o dma-alloc.o
+
+ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
+obj-y += cache.o cache-mn10300.o
+ifeq ($(CONFIG_MN10300_CACHE_WBACK),y)
+obj-y += cache-flush-mn10300.o
+endif
+endif
--- /dev/null
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+ .am33_2
+ .globl mn10300_dcache_flush
+ .globl mn10300_dcache_flush_page
+ .globl mn10300_dcache_flush_range
+ .globl mn10300_dcache_flush_range2
+ .globl mn10300_dcache_flush_inv
+ .globl mn10300_dcache_flush_inv_page
+ .globl mn10300_dcache_flush_inv_range
+ .globl mn10300_dcache_flush_inv_range2
+
+###############################################################################
+#
+# void mn10300_dcache_flush(void)
+# Flush the entire data cache back to RAM
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush:
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_flush_end
+
+ # read the addresses tagged in the cache's tag RAM and attempt to flush
+ # those addresses specifically
+ # - we rely on the hardware to filter out invalid tag entry addresses
+ mov DCACHE_TAG(0,0),a0 # dcache tag RAM access address
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_loop:
+ mov (a0),d0
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ or L1_CACHE_TAG_VALID,d0 # retain valid entries in the
+ # cache
+ mov d0,(a1) # conditional purge
+
+mn10300_dcache_flush_skip:
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_loop
+
+mn10300_dcache_flush_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_page(unsigned start)
+# void mn10300_dcache_flush_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_range2(unsigned start, unsigned size)
+# Flush a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_flush_range2:
+ add d0,d1
+mn10300_dcache_flush_range:
+ movm [d2,d3],(sp)
+
+ movhu (CHCTR),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_flush_range_end
+
+ # round start addr down
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ # write a request to flush all instances of an address from the cache
+ mov DCACHE_PURGE(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache purge control
+ # reg address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+ or L1_CACHE_TAG_VALID,a1 # retain valid entries in the
+ # cache
+
+mn10300_dcache_flush_range_loop:
+ mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
+ # all ways
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
+ add -1,d1
+ bne mn10300_dcache_flush_range_loop
+
+mn10300_dcache_flush_range_end:
+ ret [d2,d3],8
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv(void)
+# Flush the entire data cache and invalidate all entries
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_inv:
+ movhu (CHCTR),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_flush_inv_end
+
+ # hit each line in the dcache with an unconditional purge
+ mov DCACHE_PURGE(0,0),a1 # dcache purge request address
+ mov L1_CACHE_NWAYS*L1_CACHE_NENTRIES,d1 # total number of entries
+
+mn10300_dcache_flush_inv_loop:
+ mov (a1),d0 # unconditional purge
+
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ bne mn10300_dcache_flush_inv_loop
+
+mn10300_dcache_flush_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_flush_inv_page(unsigned start)
+# void mn10300_dcache_flush_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size)
+# Flush and invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_flush_inv_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_flush_inv_range2:
+ add d0,d1
+mn10300_dcache_flush_inv_range:
+ movm [d2,d3],(sp)
+ movhu (CHCTR),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_flush_inv_range_end
+
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
+ # addr down
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ # write a request to flush and invalidate all instances of an address
+ # from the cache
+ mov DCACHE_PURGE(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache purge control
+ # reg address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+mn10300_dcache_flush_inv_range_loop:
+ mov a1,(L1_CACHE_WAYDISP*0,a0) # conditionally purge this line
+ # in all ways
+
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ and ~L1_CACHE_WAYDISP,a0 # make sure way stay on way 0
+ add -1,d1
+ bne mn10300_dcache_flush_inv_range_loop
+
+mn10300_dcache_flush_inv_range_end:
+ ret [d2,d3],8
--- /dev/null
+/* MN10300 CPU core caching routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define mn10300_dcache_inv_range_intr_interval \
+ +((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
+
+#if mn10300_dcache_inv_range_intr_interval > 0xff
+#error MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL must be 8 or less
+#endif
+
+ .am33_2
+
+ .globl mn10300_icache_inv
+ .globl mn10300_dcache_inv
+ .globl mn10300_dcache_inv_range
+ .globl mn10300_dcache_inv_range2
+ .globl mn10300_dcache_inv_page
+
+###############################################################################
+#
+# void mn10300_icache_inv(void)
+# Invalidate the entire icache
+#
+###############################################################################
+ ALIGN
+mn10300_icache_inv:
+ mov CHCTR,a0
+
+ movhu (a0),d0
+ btst CHCTR_ICEN,d0
+ beq mn10300_icache_inv_end
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the icache
+ and ~CHCTR_ICEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_ICINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_ICBUSY,d0
+ lne
+
+ # and reenable it
+ and ~CHCTR_ICINV,d0
+ or CHCTR_ICEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ mov d1,epsw
+
+mn10300_icache_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv(void)
+# Invalidate the entire dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_inv:
+ mov CHCTR,a0
+
+ movhu (a0),d0
+ btst CHCTR_DCEN,d0
+ beq mn10300_dcache_inv_end
+
+ mov epsw,d1
+ and ~EPSW_IE,epsw
+ nop
+ nop
+
+ # disable the dcache
+ and ~CHCTR_DCEN,d0
+ movhu d0,(a0)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # invalidate
+ or CHCTR_DCINV,d0
+ movhu d0,(a0)
+
+ # wait for the cache to finish
+ mov CHCTR,a0
+ setlb
+ movhu (a0),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # and reenable it
+ and ~CHCTR_DCINV,d0
+ or CHCTR_DCEN,d0
+ movhu d0,(a0)
+ movhu (a0),d0
+
+ mov d1,epsw
+
+mn10300_dcache_inv_end:
+ ret [],0
+
+###############################################################################
+#
+# void mn10300_dcache_inv_range(unsigned start, unsigned end)
+# void mn10300_dcache_inv_range2(unsigned start, unsigned size)
+# void mn10300_dcache_inv_page(unsigned start)
+# Invalidate a range of addresses on a page in the dcache
+#
+###############################################################################
+ ALIGN
+mn10300_dcache_inv_page:
+ mov PAGE_SIZE,d1
+mn10300_dcache_inv_range2:
+ add d0,d1
+mn10300_dcache_inv_range:
+ movm [d2,d3,a2],(sp)
+ mov CHCTR,a2
+
+ movhu (a2),d2
+ btst CHCTR_DCEN,d2
+ beq mn10300_dcache_inv_range_end
+
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d0 # round start
+ # addr down
+ mov d0,a1
+
+ add L1_CACHE_BYTES,d1 # round end addr up
+ and L1_CACHE_TAG_ADDRESS|L1_CACHE_TAG_ENTRY,d1
+
+ clr d2 # we're going to clear tag ram
+ # entries
+
+ # read the tags from the tag RAM, and if they indicate a valid dirty
+ # cache line then invalidate that line
+ mov DCACHE_TAG(0,0),a0
+ mov a1,d0
+ and L1_CACHE_TAG_ENTRY,d0
+ add d0,a0 # starting dcache tag RAM
+ # access address
+
+ sub a1,d1
+ lsr L1_CACHE_SHIFT,d1 # total number of entries to
+ # examine
+
+ and ~(L1_CACHE_DISPARITY-1),a1 # determine comparator base
+
+mn10300_dcache_inv_range_outer_loop:
+ # disable interrupts
+ mov epsw,d3
+ and ~EPSW_IE,epsw
+ nop # note that reading CHCTR and
+ # AND'ing D0 occupy two delay
+ # slots after disabling
+ # interrupts
+
+ # disable the dcache
+ movhu (a2),d0
+ and ~CHCTR_DCEN,d0
+ movhu d0,(a2)
+
+ # and wait for it to calm down
+ setlb
+ movhu (a2),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+mn10300_dcache_inv_range_loop:
+
+ # process the way 0 slot
+ mov (L1_CACHE_WAYDISP*0,a0),d0 # read the tag in the way 0 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_0 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_0 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_0:
+
+ # process the way 1 slot
+ mov (L1_CACHE_WAYDISP*1,a0),d0 # read the tag in the way 1 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_1 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_1 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_1:
+
+ # process the way 2 slot
+ mov (L1_CACHE_WAYDISP*2,a0),d0 # read the tag in the way 2 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_2 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_2 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_2:
+
+ # process the way 3 slot
+ mov (L1_CACHE_WAYDISP*3,a0),d0 # read the tag in the way 3 slot
+ btst L1_CACHE_TAG_VALID,d0
+ beq mn10300_dcache_inv_range_skip_3 # jump if this cacheline is not
+ # valid
+
+ xor a1,d0
+ lsr 12,d0
+ bne mn10300_dcache_inv_range_skip_3 # jump if not this cacheline
+
+ mov d2,(a0) # kill the tag
+
+mn10300_dcache_inv_range_skip_3:
+
+ # approx every N steps we re-enable the cache and see if there are any
+ # interrupts to be processed
+ # we also break out if we've reached the end of the loop
+ # (the bottom nibble of the count is zero in both cases)
+ add L1_CACHE_BYTES,a0
+ add L1_CACHE_BYTES,a1
+ add -1,d1
+ btst mn10300_dcache_inv_range_intr_interval,d1
+ bne mn10300_dcache_inv_range_loop
+
+ # wait for the cache to finish what it's doing
+ setlb
+ movhu (a2),d0
+ btst CHCTR_DCBUSY,d0
+ lne
+
+ # and reenable it
+ or CHCTR_DCEN,d0
+ movhu d0,(a2)
+ movhu (a2),d0
+
+ # re-enable interrupts
+ # - we don't bother with delay NOPs as we'll have enough instructions
+ # before we disable interrupts again to give the interrupts a chance
+ # to happen
+ mov d3,epsw
+
+ # go around again if the counter hasn't yet reached zero
+ add 0,d1
+ bne mn10300_dcache_inv_range_outer_loop
+
+mn10300_dcache_inv_range_end:
+ ret [d2,d3,a2],12
--- /dev/null
+/* MN10300 Cache flushing routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/mman.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+EXPORT_SYMBOL(mn10300_icache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv);
+EXPORT_SYMBOL(mn10300_dcache_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_inv_page);
+
+#ifdef CONFIG_MN10300_CACHE_WBACK
+EXPORT_SYMBOL(mn10300_dcache_flush);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_inv_page);
+EXPORT_SYMBOL(mn10300_dcache_flush_range);
+EXPORT_SYMBOL(mn10300_dcache_flush_range2);
+EXPORT_SYMBOL(mn10300_dcache_flush_page);
+#endif
+
+/*
+ * write a page back from the dcache and invalidate the icache so that we can
+ * run code from it that we've just written into it
+ */
+void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+ mn10300_dcache_flush_page(page_to_phys(page));
+ mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_page);
+
+/*
+ * write some code we've just written back from the dcache and invalidate the
+ * icache so that we can run that code
+ */
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+#ifdef CONFIG_MN10300_CACHE_WBACK
+ unsigned long addr, size, off;
+ struct page *page;
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *ppte, pte;
+
+ for (; start < end; start += size) {
+ /* work out how much of the page to flush */
+ off = start & (PAGE_SIZE - 1);
+
+ size = end - start;
+ if (size > PAGE_SIZE - off)
+ size = PAGE_SIZE - off;
+
+ /* get the physical address the page is mapped to from the page
+ * tables */
+ pgd = pgd_offset(current->mm, start);
+ if (!pgd || !pgd_val(*pgd))
+ continue;
+
+ pud = pud_offset(pgd, start);
+ if (!pud || !pud_val(*pud))
+ continue;
+
+ pmd = pmd_offset(pud, start);
+ if (!pmd || !pmd_val(*pmd))
+ continue;
+
+ ppte = pte_offset_map(pmd, start);
+ if (!ppte)
+ continue;
+ pte = *ppte;
+ pte_unmap(ppte);
+
+ if (pte_none(pte))
+ continue;
+
+ page = pte_page(pte);
+ if (!page)
+ continue;
+
+ addr = page_to_phys(page);
+
+ /* flush the dcache and invalidate the icache coverage on that
+ * region */
+ mn10300_dcache_flush_range2(addr + off, size);
+ }
+#endif
+
+ mn10300_icache_inv();
+}
+EXPORT_SYMBOL(flush_icache_range);
+
+/*
+ * allow userspace to flush the instruction cache
+ */
+asmlinkage long sys_cacheflush(unsigned long start, unsigned long end)
+{
+ if (end < start)
+ return -EINVAL;
+
+ flush_icache_range(start, end);
+ return 0;
+}
--- /dev/null
+/* MN10300 Dynamic DMA mapping support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-dma.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int gfp)
+{
+ unsigned long addr;
+ void *ret;
+
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+ gfp |= GFP_DMA;
+
+ addr = __get_free_pages(gfp, get_order(size));
+ if (!addr)
+ return NULL;
+
+ /* map the coherent memory through the uncached memory window */
+ ret = (void *) (addr | 0x20000000);
+
+ /* fill the memory with obvious rubbish */
+ memset((void *) addr, 0xfb, size);
+
+ /* write back and evict all cache lines covering this region */
+ mn10300_dcache_flush_inv_range2(virt_to_phys((void *) addr), PAGE_SIZE);
+
+ *dma_handle = virt_to_bus((void *) addr);
+ return ret;
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ unsigned long addr = (unsigned long) vaddr & ~0x20000000;
+
+ free_pages(addr, get_order(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
--- /dev/null
+/* MN10300 In-kernel exception handling
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return 1;
+ }
+
+ return 0;
+}
--- /dev/null
+/* MN10300 MMU Fault handler
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/vt_kern.h> /* For unblank_screen() */
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgalloc.h>
+#include <asm/hardirq.h>
+#include <asm/gdb-stub.h>
+#include <asm/cpu-regs.h>
+
+/*
+ * Unlock any spinlocks which will prevent us from getting the
+ * message out
+ */
+void bust_spinlocks(int yes)
+{
+ if (yes) {
+ oops_in_progress = 1;
+#ifdef CONFIG_SMP
+ /* Many serial drivers do __global_cli() */
+ global_irq_lock = 0;
+#endif
+ } else {
+ int loglevel_save = console_loglevel;
+#ifdef CONFIG_VT
+ unblank_screen();
+#endif
+ oops_in_progress = 0;
+ /*
+ * OK, the message is on the console. Now we call printk()
+ * without oops_in_progress set so that printk will give klogd
+ * a poke. Hold onto your hats...
+ */
+ console_loglevel = 15; /* NMI oopser may have shut the console
+ * up */
+ printk(" ");
+ console_loglevel = loglevel_save;
+ }
+}
+
+void do_BUG(const char *file, int line)
+{
+ bust_spinlocks(1);
+ printk(KERN_EMERG "------------[ cut here ]------------\n");
+ printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
+}
+
+#if 0
+static void print_pagetable_entries(pgd_t *pgdir, unsigned long address)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ pgd = pgdir + __pgd_offset(address);
+ printk(KERN_DEBUG "pgd entry %p: %016Lx\n",
+ pgd, (long long) pgd_val(*pgd));
+
+ if (!pgd_present(*pgd)) {
+ printk(KERN_DEBUG "... pgd not present!\n");
+ return;
+ }
+ pmd = pmd_offset(pgd, address);
+ printk(KERN_DEBUG "pmd entry %p: %016Lx\n",
+ pmd, (long long)pmd_val(*pmd));
+
+ if (!pmd_present(*pmd)) {
+ printk(KERN_DEBUG "... pmd not present!\n");
+ return;
+ }
+ pte = pte_offset(pmd, address);
+ printk(KERN_DEBUG "pte entry %p: %016Lx\n",
+ pte, (long long) pte_val(*pte));
+
+ if (!pte_present(*pte))
+ printk(KERN_DEBUG "... pte not present!\n");
+}
+#endif
+
+asmlinkage void monitor_signal(struct pt_regs *);
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * fault_code:
+ * - LSW: either MMUFCR_IFC or MMUFCR_DFC as appropriate
+ * - MSW: 0 if data access, 1 if instruction access
+ * - bit 0: TLB miss flag
+ * - bit 1: initial write
+ * - bit 2: page invalid
+ * - bit 3: protection violation
+ * - bit 4: accessor (0=user 1=kernel)
+ * - bit 5: 0=read 1=write
+ * - bit 6-8: page protection spec
+ * - bit 9: illegal address
+ * - bit 16: 0=data 1=ins
+ *
+ */
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long fault_code,
+ unsigned long address)
+{
+ struct vm_area_struct *vma;
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ unsigned long page;
+ siginfo_t info;
+ int write, fault;
+
+#ifdef CONFIG_GDBSTUB
+ /* handle GDB stub causing a fault */
+ if (gdbstub_busy) {
+ gdbstub_exception(regs, TBR & TBR_INT_CODE);
+ return;
+ }
+#endif
+
+#if 0
+ printk(KERN_DEBUG "--- do_page_fault(%p,%s:%04lx,%08lx)\n",
+ regs,
+ fault_code & 0x10000 ? "ins" : "data",
+ fault_code & 0xffff, address);
+#endif
+
+ tsk = current;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ *
+ * This verifies that the fault happens in kernel space
+ * and that the fault was a page not present (invalid) error
+ */
+ if (address >= VMALLOC_START && address < VMALLOC_END &&
+ (fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR &&
+ (fault_code & MMUFCR_xFC_PGINVAL) == MMUFCR_xFC_PGINVAL
+ )
+ goto vmalloc_fault;
+
+ mm = tsk->mm;
+ info.si_code = SEGV_MAPERR;
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+ if (in_interrupt() || !mm)
+ goto no_context;
+
+ down_read(&mm->mmap_sem);
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= address)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+ /* accessing the stack below the stack pointer is always a
+ * bug */
+ if ((address & PAGE_MASK) + 2 * PAGE_SIZE < regs->sp) {
+#if 0
+ printk(KERN_WARNING
+ "[%d] ### Access below stack @%lx (sp=%lx)\n",
+ current->pid, address, regs->sp);
+ printk(KERN_WARNING
+ "vma [%08x - %08x]\n",
+ vma->vm_start, vma->vm_end);
+ show_registers(regs);
+ printk(KERN_WARNING
+ "[%d] ### Code: [%08lx]"
+ " %02x %02x %02x %02x %02x %02x %02x %02x\n",
+ current->pid,
+ regs->pc,
+ ((u8 *) regs->pc)[0],
+ ((u8 *) regs->pc)[1],
+ ((u8 *) regs->pc)[2],
+ ((u8 *) regs->pc)[3],
+ ((u8 *) regs->pc)[4],
+ ((u8 *) regs->pc)[5],
+ ((u8 *) regs->pc)[6],
+ ((u8 *) regs->pc)[7]
+ );
+#endif
+ goto bad_area;
+ }
+ }
+
+ if (expand_stack(vma, address))
+ goto bad_area;
+
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+ info.si_code = SEGV_ACCERR;
+ write = 0;
+ switch (fault_code & (MMUFCR_xFC_PGINVAL|MMUFCR_xFC_TYPE)) {
+ default: /* 3: write, present */
+ case MMUFCR_xFC_TYPE_WRITE:
+#ifdef TEST_VERIFY_AREA
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+ printk(KERN_DEBUG "WP fault at %08lx\n", regs->pc);
+#endif
+ /* write to absent page */
+ case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_WRITE:
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ write++;
+ break;
+
+ /* read from protected page */
+ case MMUFCR_xFC_TYPE_READ:
+ goto bad_area;
+
+ /* read from absent page present */
+ case MMUFCR_xFC_PGINVAL | MMUFCR_xFC_TYPE_READ:
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ break;
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ fault = handle_mm_fault(mm, vma, address, write);
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+ if (fault & VM_FAULT_MAJOR)
+ current->maj_flt++;
+ else
+ current->min_flt++;
+
+ up_read(&mm->mmap_sem);
+ return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+
+ /* User mode accesses just cause a SIGSEGV */
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR) {
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ /* info.si_code has been set above */
+ info.si_addr = (void *)address;
+ force_sig_info(SIGSEGV, &info, tsk);
+ return;
+ }
+
+no_context:
+ monitor_signal(regs);
+ /* Are we prepared to handle this kernel fault? */
+ if (fixup_exception(regs))
+ return;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+ bust_spinlocks(1);
+
+ if (address < PAGE_SIZE)
+ printk(KERN_ALERT
+ "Unable to handle kernel NULL pointer dereference");
+ else
+ printk(KERN_ALERT
+ "Unable to handle kernel paging request");
+ printk(" at virtual address %08lx\n", address);
+ printk(" printing pc:\n");
+ printk(KERN_ALERT "%08lx\n", regs->pc);
+
+#ifdef CONFIG_GDBSTUB
+ gdbstub_intercept(
+ regs, fault_code & 0x00010000 ? EXCEP_IAERROR : EXCEP_DAERROR);
+#endif
+
+ page = PTBR;
+ page = ((unsigned long *) __va(page))[address >> 22];
+ printk(KERN_ALERT "*pde = %08lx\n", page);
+ if (page & 1) {
+ page &= PAGE_MASK;
+ address &= 0x003ff000;
+ page = ((unsigned long *) __va(page))[address >> PAGE_SHIFT];
+ printk(KERN_ALERT "*pte = %08lx\n", page);
+ }
+
+ die("Oops", regs, fault_code);
+ do_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+ printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
+ do_exit(SIGKILL);
+ goto no_context;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+ monitor_signal(regs);
+
+ /*
+ * Send a sigbus, regardless of whether we were in kernel
+ * or user mode.
+ */
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRERR;
+ info.si_addr = (void *)address;
+ force_sig_info(SIGBUS, &info, tsk);
+
+ /* Kernel mode? Handle exceptions or die */
+ if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_SR)
+ goto no_context;
+ return;
+
+vmalloc_fault:
+ {
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ *
+ * Do _not_ use "tsk" here. We might be inside
+ * an interrupt in the middle of a task switch..
+ */
+ int index = pgd_index(address);
+ pgd_t *pgd, *pgd_k;
+ pud_t *pud, *pud_k;
+ pmd_t *pmd, *pmd_k;
+ pte_t *pte_k;
+
+ pgd_k = init_mm.pgd + index;
+
+ if (!pgd_present(*pgd_k))
+ goto no_context;
+
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ goto no_context;
+
+ pmd_k = pmd_offset(pud_k, address);
+ if (!pmd_present(*pmd_k))
+ goto no_context;
+
+ pgd = (pgd_t *) PTBR + index;
+ pud = pud_offset(pgd, address);
+ pmd = pmd_offset(pud, address);
+ set_pmd(pmd, *pmd_k);
+
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ goto no_context;
+ return;
+ }
+}
--- /dev/null
+/* MN10300 Memory management initialisation
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/dma.h>
+#include <asm/tlb.h>
+#include <asm/sections.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+unsigned long highstart_pfn, highend_pfn;
+
+/*
+ * set up paging
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES] = {0,};
+ pte_t *ppte;
+ int loop;
+
+ /* main kernel space -> RAM mapping is handled as 1:1 transparent by
+ * the MMU */
+ memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
+ memset(kernel_vmalloc_ptes, 0, sizeof(kernel_vmalloc_ptes));
+
+ /* load the VMALLOC area PTE table addresses into the kernel PGD */
+ ppte = kernel_vmalloc_ptes;
+ for (loop = VMALLOC_START / (PAGE_SIZE * PTRS_PER_PTE);
+ loop < VMALLOC_END / (PAGE_SIZE * PTRS_PER_PTE);
+ loop++
+ ) {
+ set_pgd(swapper_pg_dir + loop, __pgd(__pa(ppte) | _PAGE_TABLE));
+ ppte += PAGE_SIZE / sizeof(pte_t);
+ }
+
+ /* declare the sizes of the RAM zones (only use the normal zone) */
+ zones_size[ZONE_NORMAL] =
+ (contig_page_data.bdata->node_low_pfn) -
+ (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+
+ /* pass the memory from the bootmem allocator to the main allocator */
+ free_area_init(zones_size);
+
+ __flush_tlb_all();
+}
+
+/*
+ * transfer all the memory from the bootmem allocator to the runtime allocator
+ */
+void __init mem_init(void)
+{
+ int codesize, reservedpages, datasize, initsize;
+ int tmp;
+
+ if (!mem_map)
+ BUG();
+
+#define START_PFN (contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define MAX_LOW_PFN (contig_page_data.bdata->node_low_pfn)
+
+ max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
+ high_memory = (void *) __va(MAX_LOW_PFN * PAGE_SIZE);
+
+ /* clear the zero-page */
+ memset(empty_zero_page, 0, PAGE_SIZE);
+
+ /* this will put all low memory onto the freelists */
+ totalram_pages += free_all_bootmem();
+
+ reservedpages = 0;
+ for (tmp = 0; tmp < num_physpages; tmp++)
+ if (PageReserved(&mem_map[tmp]))
+ reservedpages++;
+
+ codesize = (unsigned long) &_etext - (unsigned long) &_stext;
+ datasize = (unsigned long) &_edata - (unsigned long) &_etext;
+ initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+
+ printk(KERN_INFO
+ "Memory: %luk/%luk available"
+ " (%dk kernel code, %dk reserved, %dk data, %dk init,"
+ " %ldk highmem)\n",
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT - 10),
+ max_mapnr << (PAGE_SHIFT - 10),
+ codesize >> 10,
+ reservedpages << (PAGE_SHIFT - 10),
+ datasize >> 10,
+ initsize >> 10,
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT - 10))
+ );
+}
+
+/*
+ *
+ */
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+ unsigned long addr;
+
+ for (addr = begin; addr < end; addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ memset((void *) addr, 0xcc, PAGE_SIZE);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+/*
+ * recycle memory containing stuff only required for initialisation
+ */
+void free_initmem(void)
+{
+ free_init_pages("unused kernel memory",
+ (unsigned long) &__init_begin,
+ (unsigned long) &__init_end);
+}
+
+/*
+ * dispose of the memory on which the initial ramdisk resided
+ */
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ free_init_pages("initrd memory", start, end);
+}
+#endif
--- /dev/null
+/* MN10300 Misalignment fixup handler
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <asm/smp.h>
+#include <asm/pgalloc.h>
+#include <asm/cpu-regs.h>
+#include <asm/busctl-regs.h>
+#include <asm/fpu.h>
+#include <asm/gdb-stub.h>
+#include <asm/asm-offsets.h>
+
+#if 0
+#define kdebug(FMT, ...) printk(KERN_DEBUG FMT, ##__VA_ARGS__)
+#else
+#define kdebug(FMT, ...) do {} while (0)
+#endif
+
+static int misalignment_addr(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ void **_address, unsigned long **_postinc);
+
+static int misalignment_reg(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ unsigned long **_register);
+
+static inline unsigned int_log2(unsigned x)
+{
+ unsigned y;
+ asm("bsch %1,%0" : "=r"(y) : "r"(x), "0"(0));
+ return y;
+}
+#define log2(x) int_log2(x)
+
+static const unsigned Dreg_index[] = {
+ REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+static const unsigned Areg_index[] = {
+ REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2
+};
+
+static const unsigned Rreg_index[] = {
+ REG_E0 >> 2, REG_E1 >> 2, REG_E2 >> 2, REG_E3 >> 2,
+ REG_E4 >> 2, REG_E5 >> 2, REG_E6 >> 2, REG_E7 >> 2,
+ REG_A0 >> 2, REG_A1 >> 2, REG_A2 >> 2, REG_A3 >> 2,
+ REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2
+};
+
+enum format_id {
+ FMT_S0,
+ FMT_S1,
+ FMT_S2,
+ FMT_S4,
+ FMT_D0,
+ FMT_D1,
+ FMT_D2,
+ FMT_D4,
+ FMT_D6,
+ FMT_D7,
+ FMT_D8,
+ FMT_D9,
+};
+
+struct {
+ u_int8_t opsz, dispsz;
+} format_tbl[16] = {
+ [FMT_S0] = { 8, 0 },
+ [FMT_S1] = { 8, 8 },
+ [FMT_S2] = { 8, 16 },
+ [FMT_S4] = { 8, 32 },
+ [FMT_D0] = { 16, 0 },
+ [FMT_D1] = { 16, 8 },
+ [FMT_D2] = { 16, 16 },
+ [FMT_D4] = { 16, 32 },
+ [FMT_D6] = { 24, 0 },
+ [FMT_D7] = { 24, 8 },
+ [FMT_D8] = { 24, 24 },
+ [FMT_D9] = { 24, 32 },
+};
+
+enum value_id {
+ DM0, /* data reg in opcode in bits 0-1 */
+ DM1, /* data reg in opcode in bits 2-3 */
+ DM2, /* data reg in opcode in bits 4-5 */
+ AM0, /* addr reg in opcode in bits 0-1 */
+ AM1, /* addr reg in opcode in bits 2-3 */
+ AM2, /* addr reg in opcode in bits 4-5 */
+ RM0, /* reg in opcode in bits 0-3 */
+ RM1, /* reg in opcode in bits 2-5 */
+ RM2, /* reg in opcode in bits 4-7 */
+ RM4, /* reg in opcode in bits 8-11 */
+ RM6, /* reg in opcode in bits 12-15 */
+
+ RD0, /* reg in displacement in bits 0-3 */
+ RD2, /* reg in displacement in bits 4-7 */
+
+ SP, /* stack pointer */
+
+ SD8, /* 8-bit signed displacement */
+ SD16, /* 16-bit signed displacement */
+ SD24, /* 24-bit signed displacement */
+ SIMM4_2, /* 4-bit signed displacement in opcode bits 4-7 */
+ SIMM8, /* 8-bit signed immediate */
+ IMM24, /* 24-bit unsigned immediate */
+ IMM32, /* 32-bit unsigned immediate */
+ IMM32_HIGH8, /* 32-bit unsigned immediate, high 8-bits in opcode */
+
+ DN0 = DM0,
+ DN1 = DM1,
+ DN2 = DM2,
+ AN0 = AM0,
+ AN1 = AM1,
+ AN2 = AM2,
+ RN0 = RM0,
+ RN1 = RM1,
+ RN2 = RM2,
+ RN4 = RM4,
+ RN6 = RM6,
+ DI = DM1,
+ RI = RM2,
+
+};
+
+struct mn10300_opcode {
+ const char *name;
+ u_int32_t opcode;
+ u_int32_t opmask;
+ unsigned exclusion;
+
+ enum format_id format;
+
+ unsigned cpu_mask;
+#define AM33 330
+
+ unsigned params[2];
+#define MEM(ADDR) (0x80000000 | (ADDR))
+#define MEM2(ADDR1, ADDR2) (0x80000000 | (ADDR1) << 8 | (ADDR2))
+#define MEMINC(ADDR) (0x81000000 | (ADDR))
+#define MEMINC2(ADDR, INC) (0x81000000 | (ADDR) << 8 | (INC))
+};
+
+/* LIBOPCODES EXCERPT
+ Assemble Matsushita MN10300 instructions.
+ Copyright 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public Licence as published by
+ the Free Software Foundation; either version 2 of the Licence, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public Licence for more details.
+
+ You should have received a copy of the GNU General Public Licence
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+static const struct mn10300_opcode mn10300_opcodes[] = {
+{ "mov", 0x60, 0xf0, 0, FMT_S0, 0, {DM1, MEM(AN0)}},
+{ "mov", 0x70, 0xf0, 0, FMT_S0, 0, {MEM(AM0), DN1}},
+{ "mov", 0xf000, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), AN1}},
+{ "mov", 0xf010, 0xfff0, 0, FMT_D0, 0, {AM1, MEM(AN0)}},
+{ "mov", 0xf300, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}},
+{ "mov", 0xf340, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}},
+{ "mov", 0xf380, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), AN2}},
+{ "mov", 0xf3c0, 0xffc0, 0, FMT_D0, 0, {AM2, MEM2(DI, AN0)}},
+{ "mov", 0xf80000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}},
+{ "mov", 0xf81000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}},
+{ "mov", 0xf82000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8,AM0), AN1}},
+{ "mov", 0xf83000, 0xfff000, 0, FMT_D1, 0, {AM1, MEM2(SD8, AN0)}},
+{ "mov", 0xf8f000, 0xfffc00, 0, FMT_D1, AM33, {MEM2(SD8, AM0), SP}},
+{ "mov", 0xf8f400, 0xfffc00, 0, FMT_D1, AM33, {SP, MEM2(SD8, AN0)}},
+{ "mov", 0xf90a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}},
+{ "mov", 0xf91a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}},
+{ "mov", 0xf96a00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}},
+{ "mov", 0xf97a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}},
+{ "mov", 0xfa000000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}},
+{ "mov", 0xfa100000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}},
+{ "mov", 0xfa200000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), AN1}},
+{ "mov", 0xfa300000, 0xfff00000, 0, FMT_D2, 0, {AM1, MEM2(SD16, AN0)}},
+{ "mov", 0xfb0a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}},
+{ "mov", 0xfb1a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}},
+{ "mov", 0xfb6a0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}},
+{ "mov", 0xfb7a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "mov", 0xfb8e0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}},
+{ "mov", 0xfb9e0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}},
+{ "mov", 0xfc000000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}},
+{ "mov", 0xfc100000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}},
+{ "mov", 0xfc200000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), AN1}},
+{ "mov", 0xfc300000, 0xfff00000, 0, FMT_D4, 0, {AM1, MEM2(IMM32,AN0)}},
+{ "mov", 0xfd0a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}},
+{ "mov", 0xfd1a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}},
+{ "mov", 0xfd6a0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}},
+{ "mov", 0xfd7a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}},
+{ "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "mov", 0xfe6a0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "mov", 0xfe7a0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+
+{ "movhu", 0xf060, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), DN1}},
+{ "movhu", 0xf070, 0xfff0, 0, FMT_D0, 0, {DM1, MEM(AN0)}},
+{ "movhu", 0xf480, 0xffc0, 0, FMT_D0, 0, {MEM2(DI, AM0), DN2}},
+{ "movhu", 0xf4c0, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}},
+{ "movhu", 0xf86000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}},
+{ "movhu", 0xf87000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}},
+{ "movhu", 0xf94a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}},
+{ "movhu", 0xf95a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}},
+{ "movhu", 0xf9ea00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}},
+{ "movhu", 0xf9fa00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}},
+{ "movhu", 0xfa600000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}},
+{ "movhu", 0xfa700000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}},
+{ "movhu", 0xfb4a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}},
+{ "movhu", 0xfb5a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}},
+{ "movhu", 0xfbce0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}},
+{ "movhu", 0xfbde0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}},
+{ "movhu", 0xfbea0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}},
+{ "movhu", 0xfbfa0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}},
+{ "movhu", 0xfc600000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}},
+{ "movhu", 0xfc700000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}},
+{ "movhu", 0xfd4a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}},
+{ "movhu", 0xfd5a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}},
+{ "movhu", 0xfdea0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}},
+{ "movhu", 0xfdfa0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}},
+{ "movhu", 0xfe4a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}},
+{ "movhu", 0xfe5a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}},
+{ "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}},
+{ "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}},
+{ 0, 0, 0, 0, 0, 0, {0}},
+};
+
+/*
+ * fix up misalignment problems where possible
+ */
+asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code)
+{
+ const struct exception_table_entry *fixup;
+ const struct mn10300_opcode *pop;
+ unsigned long *registers = (unsigned long *) regs;
+ unsigned long data, *store, *postinc;
+ mm_segment_t seg;
+ siginfo_t info;
+ uint32_t opcode, disp, noc, xo, xm;
+ uint8_t *pc, byte;
+ void *address;
+ unsigned tmp, npop;
+
+ kdebug("MISALIGN at %lx\n", regs->pc);
+
+ if (in_interrupt())
+ die("Misalignment trap in interrupt context", regs, code);
+
+ if (regs->epsw & EPSW_IE)
+ asm volatile("or %0,epsw" : : "i"(EPSW_IE));
+
+ seg = get_fs();
+ set_fs(KERNEL_DS);
+
+ fixup = search_exception_tables(regs->pc);
+
+ /* first thing to do is to match the opcode */
+ pc = (u_int8_t *) regs->pc;
+
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ opcode = byte;
+ noc = 8;
+
+ for (pop = mn10300_opcodes; pop->name; pop++) {
+ npop = log2(pop->opcode | pop->opmask);
+ if (npop <= 0 || npop > 31)
+ continue;
+ npop = (npop + 8) & ~7;
+
+ got_more_bits:
+ if (npop == noc) {
+ if ((opcode & pop->opmask) == pop->opcode)
+ goto found_opcode;
+ } else if (npop > noc) {
+ xo = pop->opcode >> (npop - noc);
+ xm = pop->opmask >> (npop - noc);
+
+ if ((opcode & xm) != xo)
+ continue;
+
+ /* we've got a partial match (an exact match on the
+ * first N bytes), so we need to get some more data */
+ pc++;
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ opcode = opcode << 8 | byte;
+ noc += 8;
+ goto got_more_bits;
+ } else {
+ /* there's already been a partial match as long as the
+ * complete match we're now considering, so this one
+ * should't match */
+ continue;
+ }
+ }
+
+ /* didn't manage to find a fixup */
+ if (!user_mode(regs))
+ printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n",
+ regs->pc, opcode);
+
+failed:
+ set_fs(seg);
+ if (die_if_no_fixup("misalignment error", regs, code))
+ return;
+
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRALN;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGBUS, &info, current);
+ return;
+
+ /* error reading opcodes */
+fetch_error:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %p: fault whilst reading instruction data\n",
+ pc);
+ goto failed;
+
+bad_addr_mode:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported addressing mode %x\n",
+ regs->pc, opcode);
+ goto failed;
+
+bad_reg_mode:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported register mode %x\n",
+ regs->pc, opcode);
+ goto failed;
+
+unsupported_instruction:
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx: unsupported instruction %x (%s)\n",
+ regs->pc, opcode, pop->name);
+ goto failed;
+
+transfer_failed:
+ set_fs(seg);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return;
+ }
+ if (die_if_no_fixup("misalignment fixup", regs, code))
+ return;
+
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ info.si_code = 0;
+ info.si_addr = (void *) regs->pc;
+ force_sig_info(SIGSEGV, &info, current);
+ return;
+
+ /* we matched the opcode */
+found_opcode:
+ kdebug("MISALIGN: %lx: %x==%x { %x, %x }\n",
+ regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]);
+
+ tmp = format_tbl[pop->format].opsz;
+ if (tmp > noc)
+ BUG(); /* match was less complete than it ought to have been */
+
+ if (tmp < noc) {
+ tmp = noc - tmp;
+ opcode >>= tmp;
+ pc -= tmp >> 3;
+ }
+
+ /* grab the extra displacement (note it's LSB first) */
+ disp = 0;
+ tmp = format_tbl[pop->format].dispsz >> 3;
+ while (tmp > 0) {
+ tmp--;
+ disp <<= 8;
+
+ pc++;
+ if (__get_user(byte, pc) != 0)
+ goto fetch_error;
+ disp |= byte;
+ }
+
+ set_fs(KERNEL_XDS);
+ if (fixup || regs->epsw & EPSW_nSL)
+ set_fs(seg);
+
+ tmp = (pop->params[0] ^ pop->params[1]) & 0x80000000;
+ if (!tmp) {
+ if (!user_mode(regs))
+ printk(KERN_CRIT
+ "MISALIGN: %lx:"
+ " insn not move to/from memory %x\n",
+ regs->pc, opcode);
+ goto failed;
+ }
+
+ if (pop->params[0] & 0x80000000) {
+ /* move memory to register */
+ if (!misalignment_addr(registers, pop->params[0], opcode, disp,
+ &address, &postinc))
+ goto bad_addr_mode;
+
+ if (!misalignment_reg(registers, pop->params[1], opcode, disp,
+ &store))
+ goto bad_reg_mode;
+
+ if (strcmp(pop->name, "mov") == 0) {
+ kdebug("FIXUP: mov (%p),DARn\n", address);
+ if (copy_from_user(&data, (void *) address, 4) != 0)
+ goto transfer_failed;
+ if (pop->params[0] & 0x1000000)
+ *postinc += 4;
+ } else if (strcmp(pop->name, "movhu") == 0) {
+ kdebug("FIXUP: movhu (%p),DARn\n", address);
+ data = 0;
+ if (copy_from_user(&data, (void *) address, 2) != 0)
+ goto transfer_failed;
+ if (pop->params[0] & 0x1000000)
+ *postinc += 2;
+ } else {
+ goto unsupported_instruction;
+ }
+
+ *store = data;
+ } else {
+ /* move register to memory */
+ if (!misalignment_reg(registers, pop->params[0], opcode, disp,
+ &store))
+ goto bad_reg_mode;
+
+ if (!misalignment_addr(registers, pop->params[1], opcode, disp,
+ &address, &postinc))
+ goto bad_addr_mode;
+
+ data = *store;
+
+ if (strcmp(pop->name, "mov") == 0) {
+ kdebug("FIXUP: mov %lx,(%p)\n", data, address);
+ if (copy_to_user((void *) address, &data, 4) != 0)
+ goto transfer_failed;
+ if (pop->params[1] & 0x1000000)
+ *postinc += 4;
+ } else if (strcmp(pop->name, "movhu") == 0) {
+ kdebug("FIXUP: movhu %hx,(%p)\n",
+ (uint16_t) data, address);
+ if (copy_to_user((void *) address, &data, 2) != 0)
+ goto transfer_failed;
+ if (pop->params[1] & 0x1000000)
+ *postinc += 2;
+ } else {
+ goto unsupported_instruction;
+ }
+ }
+
+ tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz;
+ regs->pc += tmp >> 3;
+
+ set_fs(seg);
+ return;
+}
+
+/*
+ * determine the address that was being accessed
+ */
+static int misalignment_addr(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ void **_address, unsigned long **_postinc)
+{
+ unsigned long *postinc = NULL, address = 0, tmp;
+
+ params &= 0x7fffffff;
+
+ do {
+ switch (params & 0xff) {
+ case DM0:
+ postinc = ®isters[Dreg_index[opcode & 0x03]];
+ address += *postinc;
+ break;
+ case DM1:
+ postinc = ®isters[Dreg_index[opcode >> 2 & 0x0c]];
+ address += *postinc;
+ break;
+ case DM2:
+ postinc = ®isters[Dreg_index[opcode >> 4 & 0x30]];
+ address += *postinc;
+ break;
+ case AM0:
+ postinc = ®isters[Areg_index[opcode & 0x03]];
+ address += *postinc;
+ break;
+ case AM1:
+ postinc = ®isters[Areg_index[opcode >> 2 & 0x0c]];
+ address += *postinc;
+ break;
+ case AM2:
+ postinc = ®isters[Areg_index[opcode >> 4 & 0x30]];
+ address += *postinc;
+ break;
+ case RM0:
+ postinc = ®isters[Rreg_index[opcode & 0x0f]];
+ address += *postinc;
+ break;
+ case RM1:
+ postinc = ®isters[Rreg_index[opcode >> 2 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM2:
+ postinc = ®isters[Rreg_index[opcode >> 4 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM4:
+ postinc = ®isters[Rreg_index[opcode >> 8 & 0x0f]];
+ address += *postinc;
+ break;
+ case RM6:
+ postinc = ®isters[Rreg_index[opcode >> 12 & 0x0f]];
+ address += *postinc;
+ break;
+ case RD0:
+ postinc = ®isters[Rreg_index[disp & 0x0f]];
+ address += *postinc;
+ break;
+ case RD2:
+ postinc = ®isters[Rreg_index[disp >> 4 & 0x0f]];
+ address += *postinc;
+ break;
+
+ case SD8:
+ case SIMM8:
+ address += (int32_t) (int8_t) (disp & 0xff);
+ break;
+ case SD16:
+ address += (int32_t) (int16_t) (disp & 0xffff);
+ break;
+ case SD24:
+ tmp = disp << 8;
+ asm("asr 8,%0" : "=r"(tmp) : "0"(tmp));
+ address += tmp;
+ break;
+ case SIMM4_2:
+ tmp = opcode >> 4 & 0x0f;
+ tmp <<= 28;
+ asm("asr 28,%0" : "=r"(tmp) : "0"(tmp));
+ address += tmp;
+ break;
+ case IMM24:
+ address += disp & 0x00ffffff;
+ break;
+ case IMM32:
+ case IMM32_HIGH8:
+ address += disp;
+ break;
+ default:
+ return 0;
+ }
+ } while ((params >>= 8));
+
+ *_address = (void *) address;
+ *_postinc = postinc;
+ return 1;
+}
+
+/*
+ * determine the register that is acting as source/dest
+ */
+static int misalignment_reg(unsigned long *registers, unsigned params,
+ unsigned opcode, unsigned disp,
+ unsigned long **_register)
+{
+ params &= 0x7fffffff;
+
+ if (params & 0xffffff00)
+ return 0;
+
+ switch (params & 0xff) {
+ case DM0:
+ *_register = ®isters[Dreg_index[opcode & 0x03]];
+ break;
+ case DM1:
+ *_register = ®isters[Dreg_index[opcode >> 2 & 0x03]];
+ break;
+ case DM2:
+ *_register = ®isters[Dreg_index[opcode >> 4 & 0x03]];
+ break;
+ case AM0:
+ *_register = ®isters[Areg_index[opcode & 0x03]];
+ break;
+ case AM1:
+ *_register = ®isters[Areg_index[opcode >> 2 & 0x03]];
+ break;
+ case AM2:
+ *_register = ®isters[Areg_index[opcode >> 4 & 0x03]];
+ break;
+ case RM0:
+ *_register = ®isters[Rreg_index[opcode & 0x0f]];
+ break;
+ case RM1:
+ *_register = ®isters[Rreg_index[opcode >> 2 & 0x0f]];
+ break;
+ case RM2:
+ *_register = ®isters[Rreg_index[opcode >> 4 & 0x0f]];
+ break;
+ case RM4:
+ *_register = ®isters[Rreg_index[opcode >> 8 & 0x0f]];
+ break;
+ case RM6:
+ *_register = ®isters[Rreg_index[opcode >> 12 & 0x0f]];
+ break;
+ case RD0:
+ *_register = ®isters[Rreg_index[disp & 0x0f]];
+ break;
+ case RD2:
+ *_register = ®isters[Rreg_index[disp >> 4 & 0x0f]];
+ break;
+ case SP:
+ *_register = ®isters[REG_SP >> 2];
+ break;
+
+ default:
+ return 0;
+ }
+
+ return 1;
+}
--- /dev/null
+/* MN10300 MMU context allocation and management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+/*
+ * list of the MMU contexts last allocated on each CPU
+ */
+unsigned long mmu_context_cache[NR_CPUS] = {
+ [0 ... NR_CPUS - 1] = MMU_CONTEXT_FIRST_VERSION * 2 - 1,
+};
+
+/*
+ * flush the specified TLB entry
+ */
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+ unsigned long pteu, cnx, flags;
+
+ addr &= PAGE_MASK;
+
+ /* make sure the context doesn't migrate and defend against
+ * interference from vmalloc'd regions */
+ local_irq_save(flags);
+
+ cnx = mm_context(vma->vm_mm);
+
+ if (cnx != MMU_NO_CONTEXT) {
+ pteu = addr | (cnx & 0x000000ffUL);
+ IPTEU = pteu;
+ DPTEU = pteu;
+ if (IPTEL & xPTEL_V)
+ IPTEL = 0;
+ if (DPTEL & xPTEL_V)
+ DPTEL = 0;
+ }
+
+ local_irq_restore(flags);
+}
+
+/*
+ * preemptively set a TLB entry
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
+{
+ unsigned long pteu, ptel, cnx, flags;
+
+ addr &= PAGE_MASK;
+ ptel = pte_val(pte) & ~(xPTEL_UNUSED1 | xPTEL_UNUSED2);
+
+ /* make sure the context doesn't migrate and defend against
+ * interference from vmalloc'd regions */
+ local_irq_save(flags);
+
+ cnx = mm_context(vma->vm_mm);
+
+ if (cnx != MMU_NO_CONTEXT) {
+ pteu = addr | (cnx & 0x000000ffUL);
+ if (!(pte_val(pte) & _PAGE_NX)) {
+ IPTEU = pteu;
+ if (IPTEL & xPTEL_V)
+ IPTEL = ptel;
+ }
+ DPTEU = pteu;
+ if (DPTEL & xPTEL_V)
+ DPTEL = ptel;
+ }
+
+ local_irq_restore(flags);
+}
--- /dev/null
+/* MN10300 Page table management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/spinlock.h>
+#include <linux/quicklist.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+void show_mem(void)
+{
+ unsigned long i;
+ int free = 0, total = 0, reserved = 0, shared = 0;
+
+ int cached = 0;
+ printk(KERN_INFO "Mem-info:\n");
+ show_free_areas();
+ i = max_mapnr;
+ while (i-- > 0) {
+ total++;
+ if (PageReserved(mem_map + i))
+ reserved++;
+ else if (PageSwapCache(mem_map + i))
+ cached++;
+ else if (!page_count(mem_map + i))
+ free++;
+ else
+ shared += page_count(mem_map + i) - 1;
+ }
+ printk(KERN_INFO "%d pages of RAM\n", total);
+ printk(KERN_INFO "%d free pages\n", free);
+ printk(KERN_INFO "%d reserved pages\n", reserved);
+ printk(KERN_INFO "%d pages shared\n", shared);
+ printk(KERN_INFO "%d pages swap cached\n", cached);
+}
+
+/*
+ * Associate a large virtual page frame with a given physical page frame
+ * and protection flags for that frame. pfn is for the base of the page,
+ * vaddr is what the page gets mapped to - both must be properly aligned.
+ * The pmd must already be instantiated. Assumes PAE mode.
+ */
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ if (vaddr & (PMD_SIZE-1)) { /* vaddr is misaligned */
+ printk(KERN_ERR "set_pmd_pfn: vaddr misaligned\n");
+ return; /* BUG(); */
+ }
+ if (pfn & (PTRS_PER_PTE-1)) { /* pfn is misaligned */
+ printk(KERN_ERR "set_pmd_pfn: pfn misaligned\n");
+ return; /* BUG(); */
+ }
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ if (pgd_none(*pgd)) {
+ printk(KERN_ERR "set_pmd_pfn: pgd_none\n");
+ return; /* BUG(); */
+ }
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
+ set_pmd(pmd, pfn_pmd(pfn, flags));
+ /*
+ * It's enough to flush this one mapping.
+ * (PGE mappings get flushed as well)
+ */
+ __flush_tlb_one(vaddr);
+}
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT);
+ if (pte)
+ clear_page(pte);
+ return pte;
+}
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ struct page *pte;
+
+#ifdef CONFIG_HIGHPTE
+ pte = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM|__GFP_REPEAT, 0);
+#else
+ pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
+#endif
+ if (pte)
+ clear_highpage(pte);
+ return pte;
+}
+
+/*
+ * List of all pgd's needed for non-PAE so it can invalidate entries
+ * in both cached and uncached pgd's; not needed for PAE since the
+ * kernel pmd is shared. If PAE were not to share the pmd a similar
+ * tactic would be needed. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * If the locking proves to be non-performant, a ticketing scheme with
+ * checks at dup_mmap(), exec(), and other mmlist addition points
+ * could be used. The locking scheme was chosen on the basis of
+ * manfred's recommendations and having no core impact whatsoever.
+ * -- wli
+ */
+DEFINE_SPINLOCK(pgd_lock);
+struct page *pgd_list;
+
+static inline void pgd_list_add(pgd_t *pgd)
+{
+ struct page *page = virt_to_page(pgd);
+ page->index = (unsigned long) pgd_list;
+ if (pgd_list)
+ set_page_private(pgd_list, (unsigned long) &page->index);
+ pgd_list = page;
+ set_page_private(page, (unsigned long) &pgd_list);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+ struct page *next, **pprev, *page = virt_to_page(pgd);
+ next = (struct page *) page->index;
+ pprev = (struct page **) page_private(page);
+ *pprev = next;
+ if (next)
+ set_page_private(next, (unsigned long) pprev);
+}
+
+void pgd_ctor(void *pgd)
+{
+ unsigned long flags;
+
+ if (PTRS_PER_PMD == 1)
+ spin_lock_irqsave(&pgd_lock, flags);
+
+ memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD,
+ swapper_pg_dir + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+
+ if (PTRS_PER_PMD > 1)
+ return;
+
+ pgd_list_add(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+ memset(pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
+}
+
+/* never called when PTRS_PER_PMD > 1 */
+void pgd_dtor(void *pgd)
+{
+ unsigned long flags; /* can be called from interrupt context */
+
+ spin_lock_irqsave(&pgd_lock, flags);
+ pgd_list_del(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ return quicklist_alloc(0, GFP_KERNEL, pgd_ctor);
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ quicklist_free(0, pgd_dtor, pgd);
+}
+
+void __init pgtable_cache_init(void)
+{
+}
+
+void check_pgt_cache(void)
+{
+ quicklist_trim(0, pgd_dtor, 25, 16);
+}
--- /dev/null
+###############################################################################
+#
+# TLB loading functions
+#
+# Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Modified by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/frame.inc>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+###############################################################################
+#
+# Instruction TLB Miss handler entry point
+#
+###############################################################################
+ .type itlb_miss,@function
+ENTRY(itlb_miss)
+ and ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+ movm [d2,d3,a2],(sp)
+#else
+ or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate
+ # register bank
+ nop
+ nop
+ nop
+#endif
+
+ mov (IPTEU),d3
+ mov (PTBR),a2
+ mov d3,d2
+ and 0xffc00000,d2
+ lsr 20,d2
+ mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22]
+ btst _PAGE_VALID,a2
+ beq itlb_miss_fault # jump if doesn't point anywhere
+
+ and ~(PAGE_SIZE-1),a2
+ mov d3,d2
+ and 0x003ff000,d2
+ lsr 10,d2
+ add d2,a2
+ mov (a2),d2 # get pte from PTD[addr 21..12]
+ btst _PAGE_VALID,d2
+ beq itlb_miss_fault # jump if doesn't point to a page
+ # (might be a swap id)
+ bset _PAGE_ACCESSED,(0,a2)
+ and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+itlb_miss_set:
+ mov d2,(IPTEL) # change the TLB
+#ifdef CONFIG_GDBSTUB
+ movm (sp),[d2,d3,a2]
+#endif
+ rti
+
+itlb_miss_fault:
+ mov _PAGE_VALID,d2 # force address error handler to be
+ # invoked
+ bra itlb_miss_set
+
+ .size itlb_miss, . - itlb_miss
+
+###############################################################################
+#
+# Data TLB Miss handler entry point
+#
+###############################################################################
+ .type dtlb_miss,@function
+ENTRY(dtlb_miss)
+ and ~EPSW_NMID,epsw
+#ifdef CONFIG_GDBSTUB
+ movm [d2,d3,a2],(sp)
+#else
+ or EPSW_nAR,epsw # switch D0-D3 & A0-A3 to the alternate
+ # register bank
+ nop
+ nop
+ nop
+#endif
+
+ mov (DPTEU),d3
+ mov (PTBR),a2
+ mov d3,d2
+ and 0xffc00000,d2
+ lsr 20,d2
+ mov (a2,d2),a2 # PTD *ptd = PGD[addr 31..22]
+ btst _PAGE_VALID,a2
+ beq dtlb_miss_fault # jump if doesn't point anywhere
+
+ and ~(PAGE_SIZE-1),a2
+ mov d3,d2
+ and 0x003ff000,d2
+ lsr 10,d2
+ add d2,a2
+ mov (a2),d2 # get pte from PTD[addr 21..12]
+ btst _PAGE_VALID,d2
+ beq dtlb_miss_fault # jump if doesn't point to a page
+ # (might be a swap id)
+ bset _PAGE_ACCESSED,(0,a2)
+ and ~(xPTEL_UNUSED1|xPTEL_UNUSED2),d2
+dtlb_miss_set:
+ mov d2,(DPTEL) # change the TLB
+#ifdef CONFIG_GDBSTUB
+ movm (sp),[d2,d3,a2]
+#endif
+ rti
+
+dtlb_miss_fault:
+ mov _PAGE_VALID,d2 # force address error handler to be
+ # invoked
+ bra dtlb_miss_set
+ .size dtlb_miss, . - dtlb_miss
+
+###############################################################################
+#
+# Instruction TLB Address Error handler entry point
+#
+###############################################################################
+ .type itlb_aerror,@function
+ENTRY(itlb_aerror)
+ and ~EPSW_NMID,epsw
+ add -4,sp
+ SAVE_ALL
+ add -4,sp # need to pass three params
+
+ # calculate the fault code
+ movhu (MMUFCR_IFC),d1
+ or 0x00010000,d1 # it's an instruction fetch
+
+ # determine the page address
+ mov (IPTEU),a2
+ mov a2,d0
+ and PAGE_MASK,d0
+ mov d0,(12,sp)
+
+ clr d0
+ mov d0,(IPTEL)
+
+ and ~EPSW_NMID,epsw
+ or EPSW_IE,epsw
+ mov fp,d0
+ call do_page_fault[],0 # do_page_fault(regs,code,addr
+
+ jmp ret_from_exception
+ .size itlb_aerror, . - itlb_aerror
+
+###############################################################################
+#
+# Data TLB Address Error handler entry point
+#
+###############################################################################
+ .type dtlb_aerror,@function
+ENTRY(dtlb_aerror)
+ and ~EPSW_NMID,epsw
+ add -4,sp
+ mov d1,(sp)
+
+ movhu (MMUFCR_DFC),d1 # is it the initial valid write
+ # to this page?
+ and MMUFCR_xFC_INITWR,d1
+ beq dtlb_pagefault # jump if not
+
+ mov (DPTEL),d1 # set the dirty bit
+ # (don't replace with BSET!)
+ or _PAGE_DIRTY,d1
+ mov d1,(DPTEL)
+ mov (sp),d1
+ add 4,sp
+ rti
+
+ ALIGN
+dtlb_pagefault:
+ mov (sp),d1
+ SAVE_ALL
+ add -4,sp # need to pass three params
+
+ # calculate the fault code
+ movhu (MMUFCR_DFC),d1
+
+ # determine the page address
+ mov (DPTEU),a2
+ mov a2,d0
+ and PAGE_MASK,d0
+ mov d0,(12,sp)
+
+ clr d0
+ mov d0,(DPTEL)
+
+ and ~EPSW_NMID,epsw
+ or EPSW_IE,epsw
+ mov fp,d0
+ call do_page_fault[],0 # do_page_fault(regs,code,addr
+
+ jmp ret_from_exception
+ .size dtlb_aerror, . - dtlb_aerror
--- /dev/null
+
+menu "Profiling support"
+ depends on EXPERIMENTAL
+
+config PROFILING
+ bool "Profiling support (EXPERIMENTAL)"
+ help
+ Say Y here to enable the extended profiling support mechanisms used
+ by profilers such as OProfile.
+
+
+config OPROFILE
+ tristate "OProfile system profiling (EXPERIMENTAL)"
+ depends on PROFILING
+ help
+ OProfile is a profiling system capable of profiling the
+ whole system, include the kernel, kernel modules, libraries,
+ and applications.
+
+ If unsure, say N.
+
+endmenu
+
--- /dev/null
+#
+# Makefile for the MN10300-specific profiling code
+#
+obj-$(CONFIG_OPROFILE) += oprofile.o
+
+DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
+ oprof.o cpu_buffer.o buffer_sync.o \
+ event_buffer.o oprofile_files.o \
+ oprofilefs.o oprofile_stats.o \
+ timer_int.o )
+
+oprofile-y := $(DRIVER_OBJS) op_model_null.o
+
--- /dev/null
+/* Null profiling driver
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * Licence. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+ return -ENODEV;
+}
+
+void oprofile_arch_exit(void)
+{
+}
+
--- /dev/null
+#
+# Makefile for the MN103E010 processor chip specific code
+#
+obj-y := proc-init.o
+
--- /dev/null
+/* MN103E010 Processor initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <asm/rtc.h>
+
+/*
+ * initialise the on-silicon processor peripherals
+ */
+asmlinkage void __init processor_init(void)
+{
+ int loop;
+
+ /* set up the exception table first */
+ for (loop = 0x000; loop < 0x400; loop += 8)
+ __set_intr_stub(loop, __common_exception);
+
+ __set_intr_stub(EXCEP_ITLBMISS, itlb_miss);
+ __set_intr_stub(EXCEP_DTLBMISS, dtlb_miss);
+ __set_intr_stub(EXCEP_IAERROR, itlb_aerror);
+ __set_intr_stub(EXCEP_DAERROR, dtlb_aerror);
+ __set_intr_stub(EXCEP_BUSERROR, raw_bus_error);
+ __set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault);
+ __set_intr_stub(EXCEP_SYSCALL0, system_call);
+
+ __set_intr_stub(EXCEP_NMI, nmi_handler);
+ __set_intr_stub(EXCEP_WDT, nmi_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler);
+ __set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler);
+
+ IVAR0 = EXCEP_IRQ_LEVEL0;
+ IVAR1 = EXCEP_IRQ_LEVEL1;
+ IVAR2 = EXCEP_IRQ_LEVEL2;
+ IVAR3 = EXCEP_IRQ_LEVEL3;
+ IVAR4 = EXCEP_IRQ_LEVEL4;
+ IVAR5 = EXCEP_IRQ_LEVEL5;
+ IVAR6 = EXCEP_IRQ_LEVEL6;
+
+ mn10300_dcache_flush_inv();
+ mn10300_icache_inv();
+
+ /* disable all interrupts and set to priority 6 (lowest) */
+ for (loop = 0; loop < NR_IRQS; loop++)
+ GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
+
+ /* clear the timers */
+ TM0MD = 0;
+ TM1MD = 0;
+ TM2MD = 0;
+ TM3MD = 0;
+ TM4MD = 0;
+ TM5MD = 0;
+ TM6MD = 0;
+ TM6MDA = 0;
+ TM6MDB = 0;
+ TM7MD = 0;
+ TM8MD = 0;
+ TM9MD = 0;
+ TM10MD = 0;
+ TM11MD = 0;
+
+ calibrate_clock();
+}
--- /dev/null
+###############################################################################
+#
+# Makefile for the ASB2303 board
+#
+###############################################################################
+obj-y := unit-init.o smc91111.o leds.o
--- /dev/null
+/* ASB2303 peripheral 7-segment LEDs x1 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <asm/unit/leds.h>
+
+#if 0
+static const u8 asb2303_led_hex_tbl[16] = {
+ 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+ 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+#endif
+
+static const u8 asb2303_led_chase_tbl[6] = {
+ ~0x02, /* top - segA */
+ ~0x04, /* right top - segB */
+ ~0x08, /* right bottom - segC */
+ ~0x10, /* bottom - segD */
+ ~0x20, /* left bottom - segE */
+ ~0x40, /* left top - segF */
+};
+
+static unsigned asb2303_led_chase;
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+ ASB2303_GPIO0DEF = 0x5555; /* configure as an output port */
+ ASB2303_7SEGLEDS = 0x6d; /* triple horizontal bar */
+}
+
+void peripheral_leds_led_chase(void)
+{
+ ASB2303_GPIO0DEF = 0x5555; /* configure as an output port */
+ ASB2303_7SEGLEDS = asb2303_led_chase_tbl[asb2303_led_chase];
+ asb2303_led_chase++;
+ if (asb2303_led_chase >= 6)
+ asb2303_led_chase = 0;
+}
--- /dev/null
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/timex.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/unit/smc91111.h>
+
+static struct resource smc91c111_resources[] = {
+ [0] = {
+ .start = SMC91111_BASE,
+ .end = SMC91111_BASE_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SMC91111_IRQ,
+ .end = SMC91111_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91c111_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91c111_resources),
+ .resource = smc91c111_resources,
+};
+
+/*
+ * add platform devices
+ */
+static int __init unit_device_init(void)
+{
+ platform_device_register(&smc91c111_device);
+ return 0;
+}
+
+device_initcall(unit_device_init);
--- /dev/null
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/intctl-regs.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+ /* set up the external interrupts */
+ SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_HILEVEL);
+ SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL);
+ SET_XIRQ_TRIGGER(3, XIRQ_TRIGGER_HILEVEL);
+ SET_XIRQ_TRIGGER(4, XIRQ_TRIGGER_LOWLEVEL);
+ SET_XIRQ_TRIGGER(5, XIRQ_TRIGGER_LOWLEVEL);
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+ unsigned int extnum;
+
+ for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+ switch (GET_XIRQ_TRIGGER(extnum)) {
+ case XIRQ_TRIGGER_HILEVEL:
+ case XIRQ_TRIGGER_LOWLEVEL:
+ set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+ break;
+ default:
+ break;
+ }
+ }
+}
--- /dev/null
+###############################################################################
+#
+# Makefile for the ASB2305 board
+#
+###############################################################################
+obj-y := unit-init.o leds.o
+
+obj-$(CONFIG_PCI) += pci.o pci-asb2305.o pci-irq.o pci-iomap.o
--- /dev/null
+/* ASB2305 Peripheral 7-segment LEDs x4 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/cpu/intctl-regs.h>
+#include <asm/cpu/rtc-regs.h>
+#include <asm/unit/leds.h>
+
+static const u8 asb2305_led_hex_tbl[16] = {
+ 0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+ 0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+
+static const u32 asb2305_led_chase_tbl[6] = {
+ ~0x02020202, /* top - segA */
+ ~0x04040404, /* right top - segB */
+ ~0x08080808, /* right bottom - segC */
+ ~0x10101010, /* bottom - segD */
+ ~0x20202020, /* left bottom - segE */
+ ~0x40404040, /* left top - segF */
+};
+
+static unsigned asb2305_led_chase;
+
+void peripheral_leds7x4_display_dec(unsigned int val, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(val/1000) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/100) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/10) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[val % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_hex(unsigned int val, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(val/1000) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/100) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(val/10) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[val % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(code/0x100) % 0x10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(code/0x10) % 0x10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[code % 0x10];
+ leds |= 0x6d010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_minssecs(unsigned int time, unsigned int points)
+{
+ u32 leds;
+
+ leds = asb2305_led_hex_tbl[(time/600) % 6];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(time/60) % 10];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[(time/10) % 6];
+ leds <<= 8;
+ leds |= asb2305_led_hex_tbl[time % 10];
+ leds |= points^0x01010101;
+
+ ASB2305_7SEGLEDS = leds;
+}
+
+void peripheral_leds7x4_display_rtc(void)
+{
+ unsigned int clock;
+ u8 mins, secs;
+
+ mins = RTMCR;
+ secs = RTSCR;
+
+ clock = ((mins & 0xf0) >> 4);
+ clock *= 10;
+ clock += (mins & 0x0f);
+ clock *= 6;
+
+ clock += ((secs & 0xf0) >> 4);
+ clock *= 10;
+ clock += (secs & 0x0f);
+
+ peripheral_leds7x4_display_minssecs(clock, 0);
+}
+
+void peripheral_leds_led_chase(void)
+{
+ ASB2305_7SEGLEDS = asb2305_led_chase_tbl[asb2305_led_chase];
+ asb2305_led_chase++;
+ if (asb2305_led_chase >= 6)
+ asb2305_led_chase = 0;
+}
--- /dev/null
+/* ASB2305 PCI resource stuff
+ *
+ * Copyright (C) 2001 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/i386/pci-i386.c
+ * - Copyright 1997--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include "pci-asb2305.h"
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+#if 0
+ struct pci_dev *dev = data;
+
+ printk(KERN_DEBUG
+ "### PCIBIOS_ALIGN_RESOURCE(%s,,{%08lx-%08lx,%08lx},%lx)\n",
+ pci_name(dev),
+ res->start,
+ res->end,
+ res->flags,
+ size
+ );
+#endif
+
+ if (res->flags & IORESOURCE_IO) {
+ unsigned long start = res->start;
+
+ if (start & 0x300) {
+ start = (start + 0x3ff) & ~0x3ff;
+ res->start = start;
+ }
+ }
+}
+
+
+/*
+ * Handle resources of PCI devices. If the world were perfect, we could
+ * just allocate all the resource regions and do nothing more. It isn't.
+ * On the other hand, we cannot just re-allocate all devices, as it would
+ * require us to know lots of host bridge internals. So we attempt to
+ * keep as much of the original configuration as possible, but tweak it
+ * when it's found to be wrong.
+ *
+ * Known BIOS problems we have to work around:
+ * - I/O or memory regions not configured
+ * - regions configured, but not enabled in the command register
+ * - bogus I/O addresses above 64K used
+ * - expansion ROMs left enabled (this may sound harmless, but given
+ * the fact the PCI specs explicitly allow address decoders to be
+ * shared between expansion ROMs and other resource regions, it's
+ * at least dangerous)
+ *
+ * Our solution:
+ * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ * This gives us fixed barriers on where we can allocate.
+ * (2) Allocate resources for all enabled devices. If there is
+ * a collision, just mark the resource as unallocated. Also
+ * disable expansion ROMs during this step.
+ * (3) Try to allocate resources for disabled devices. If the
+ * resources were assigned correctly, everything goes well,
+ * if they weren't, they won't disturb allocation of other
+ * resources.
+ * (4) Assign new addresses to resources which were either
+ * not configured at all or misconfigured. If explicitly
+ * requested by the user, configure expansion ROM address
+ * as well.
+ */
+static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ int idx;
+ struct resource *r, *pr;
+
+ /* Depth-First Search on bus tree */
+ list_for_each_entry(bus, bus_list, node) {
+ dev = bus->self;
+ if (dev) {
+ for (idx = PCI_BRIDGE_RESOURCES;
+ idx < PCI_NUM_RESOURCES;
+ idx++) {
+ r = &dev->resource[idx];
+ if (!r->flags)
+ continue;
+ pr = pci_find_parent_resource(dev, r);
+ if (!r->start ||
+ !pr ||
+ request_resource(pr, r) < 0) {
+ printk(KERN_ERR "PCI:"
+ " Cannot allocate resource"
+ " region %d of bridge %s\n",
+ idx, pci_name(dev));
+ /* Something is wrong with the region.
+ * Invalidate the resource to prevent
+ * child resource allocations in this
+ * range. */
+ r->flags = 0;
+ }
+ }
+ }
+ pcibios_allocate_bus_resources(&bus->children);
+ }
+}
+
+static void __init pcibios_allocate_resources(int pass)
+{
+ struct pci_dev *dev = NULL;
+ int idx, disabled;
+ u16 command;
+ struct resource *r, *pr;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for (idx = 0; idx < 6; idx++) {
+ r = &dev->resource[idx];
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->start) /* Address not assigned */
+ continue;
+ if (r->flags & IORESOURCE_IO)
+ disabled = !(command & PCI_COMMAND_IO);
+ else
+ disabled = !(command & PCI_COMMAND_MEMORY);
+ if (pass == disabled) {
+ DBG("PCI[%s]: Resource %08lx-%08lx"
+ " (f=%lx, d=%d, p=%d)\n",
+ pci_name(dev), r->start, r->end, r->flags,
+ disabled, pass);
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0) {
+ printk(KERN_ERR "PCI:"
+ " Cannot allocate resource"
+ " region %d of device %s\n",
+ idx, pci_name(dev));
+ /* We'll assign a new address later */
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+ if (!pass) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags & IORESOURCE_ROM_ENABLE) {
+ /* Turn the ROM off, leave the resource region,
+ * but keep it unregistered. */
+ u32 reg;
+ DBG("PCI: Switching off ROM of %s\n",
+ pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_read_config_dword(
+ dev, dev->rom_base_reg, ®);
+ pci_write_config_dword(
+ dev, dev->rom_base_reg,
+ reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
+ }
+ }
+}
+
+static int __init pcibios_assign_resources(void)
+{
+ struct pci_dev *dev = NULL;
+ struct resource *r, *pr;
+
+ if (!(pci_probe & PCI_ASSIGN_ROMS)) {
+ /* Try to use BIOS settings for ROMs, otherwise let
+ pci_assign_unassigned_resources() allocate the new
+ addresses. */
+ for_each_pci_dev(dev) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (!r->flags || !r->start)
+ continue;
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0) {
+ r->end -= r->start;
+ r->start = 0;
+ }
+ }
+ }
+
+ pci_assign_unassigned_resources();
+
+ return 0;
+}
+
+fs_initcall(pcibios_assign_resources);
+
+void __init pcibios_resource_survey(void)
+{
+ DBG("PCI: Allocating resources\n");
+ pcibios_allocate_bus_resources(&pci_root_buses);
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
+}
+
+int pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+
+ for (idx = 0; idx < 6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1 << idx)))
+ continue;
+
+ r = &dev->resource[idx];
+
+ if (!r->start && r->end) {
+ printk(KERN_ERR
+ "PCI: Device %s not available because of"
+ " resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+
+ if (dev->resource[PCI_ROM_RESOURCE].start)
+ cmd |= PCI_COMMAND_MEMORY;
+
+ if (cmd != old_cmd)
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ return 0;
+}
+
+/*
+ * If we set up a device for bus mastering, we need to check the latency
+ * timer as certain crappy BIOSes forget to set it properly.
+ */
+unsigned int pcibios_max_latency = 255;
+
+void pcibios_set_master(struct pci_dev *dev)
+{
+ u8 lat;
+
+ pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+
+ if (lat < 16)
+ lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
+ else if (lat > pcibios_max_latency)
+ lat = pcibios_max_latency;
+ else
+ return;
+
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ unsigned long prot;
+
+ /* Leave vm_pgoff as-is, the PCI space address is the physical
+ * address on this platform.
+ */
+ vma->vm_flags |= VM_LOCKED | VM_IO;
+
+ prot = pgprot_val(vma->vm_page_prot);
+ prot &= ~_PAGE_CACHE;
+ vma->vm_page_prot = __pgprot(prot);
+
+ /* Write-combine setting is ignored */
+ if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot))
+ return -EAGAIN;
+
+ return 0;
+}
--- /dev/null
+/* ASB2305 Arch-specific PCI declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from: arch/i386/kernel/pci-i386.h: (c) 1999 Martin Mares <mj@ucw.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _PCI_ASB2305_H
+#define _PCI_ASB2305_H
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 1
+#define PCI_PROBE_CONF1 2
+#define PCI_PROBE_CONF2 4
+#define PCI_NO_SORT 0x100
+#define PCI_BIOS_SORT 0x200
+#define PCI_NO_CHECKS 0x400
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+
+extern unsigned int pci_probe;
+
+/* pci-asb2305.c */
+
+extern unsigned int pcibios_max_latency;
+
+extern void pcibios_resource_survey(void);
+extern int pcibios_enable_resources(struct pci_dev *dev, int mask);
+
+/* pci.c */
+
+extern int pcibios_last_bus;
+extern struct pci_bus *pci_root_bus;
+extern struct pci_ops *pci_root_ops;
+
+extern struct irq_routing_table *pcibios_get_irq_routing_table(void);
+extern int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
+
+/* pci-irq.c */
+
+struct irq_info {
+ u8 bus, devfn; /* Bus, device and function */
+ struct {
+ u8 link; /* IRQ line ID, chipset dependent,
+ * 0=not routed */
+ u16 bitmap; /* Available IRQs */
+ } __attribute__((packed)) irq[4];
+ u8 slot; /* Slot number, 0=onboard */
+ u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+ u32 signature; /* PIRQ_SIGNATURE should be here */
+ u16 version; /* PIRQ_VERSION */
+ u16 size; /* Table size in bytes */
+ u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
+ u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
+ u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
+ u32 miniport_data; /* Crap */
+ u8 rfu[11];
+ u8 checksum; /* Modulo 256 checksum must give zero */
+ struct irq_info slots[0];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern void pcibios_irq_init(void);
+extern void pcibios_fixup_irqs(void);
+extern void pcibios_enable_irq(struct pci_dev *dev);
+
+#endif /* PCI_ASB2305_H */
--- /dev/null
+/* ASB2305 PCI I/O mapping handler
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/pci.h>
+#include <linux/module.h>
+
+/*
+ * Create a virtual mapping cookie for a PCI BAR (memory or IO)
+ */
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len || !start)
+ return NULL;
+
+ if ((flags & IORESOURCE_IO) || (flags & IORESOURCE_MEM))
+ return (void __iomem *) start;
+
+ return NULL;
+}
+EXPORT_SYMBOL(pci_iomap);
--- /dev/null
+/* PCI IRQ routing on the MN103E010 based ASB2305
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * This is simple: All PCI interrupts route through the CPU's XIRQ1 pin [IRQ 35]
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include "pci-asb2305.h"
+
+void __init pcibios_irq_init(void)
+{
+}
+
+void __init pcibios_fixup_irqs(void)
+{
+ struct pci_dev *dev = NULL;
+ u8 line, pin;
+
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (pin) {
+ dev->irq = XIRQ1;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
+ dev->irq);
+ }
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
+ }
+}
+
+void __init pcibios_penalize_isa_irq(int irq)
+{
+}
+
+void pcibios_enable_irq(struct pci_dev *dev)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+}
--- /dev/null
+/* ASB2305 PCI support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from arch/i386/kernel/pci-pc.c
+ * (c) 1999--2000 Martin Mares <mj@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include "pci-asb2305.h"
+
+unsigned int pci_probe = 1;
+
+int pcibios_last_bus = -1;
+struct pci_bus *pci_root_bus;
+struct pci_ops *pci_root_ops;
+
+/*
+ * Functions for accessing PCI configuration space
+ */
+
+#define CONFIG_CMD(bus, devfn, where) \
+ (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
+
+#define MEM_PAGING_REG (*(volatile __u32 *) 0xBFFFFFF4)
+#define CONFIG_ADDRESS (*(volatile __u32 *) 0xBFFFFFF8)
+#define CONFIG_DATAL(X) (*(volatile __u32 *) 0xBFFFFFFC)
+#define CONFIG_DATAW(X) (*(volatile __u16 *) (0xBFFFFFFC + ((X) & 2)))
+#define CONFIG_DATAB(X) (*(volatile __u8 *) (0xBFFFFFFC + ((X) & 3)))
+
+#define BRIDGEREGB(X) (*(volatile __u8 *) (0xBE040000 + (X)))
+#define BRIDGEREGW(X) (*(volatile __u16 *) (0xBE040000 + (X)))
+#define BRIDGEREGL(X) (*(volatile __u32 *) (0xBE040000 + (X)))
+
+static inline int __query(const struct pci_bus *bus, unsigned int devfn)
+{
+#if 0
+ return bus->number == 0 && (devfn == PCI_DEVFN(0, 0));
+ return bus->number == 1;
+ return bus->number == 0 &&
+ (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(3, 0));
+#endif
+ return 1;
+}
+
+/*
+ * translate Linuxcentric addresses to PCI bus addresses
+ */
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res)
+{
+ if (res->flags & IORESOURCE_IO) {
+ region->start = (res->start & 0x00ffffff);
+ region->end = (res->end & 0x00ffffff);
+ }
+
+ if (res->flags & IORESOURCE_MEM) {
+ region->start = (res->start & 0x03ffffff) | MEM_PAGING_REG;
+ region->end = (res->end & 0x03ffffff) | MEM_PAGING_REG;
+ }
+
+#if 0
+ printk(KERN_DEBUG "RES->BUS: %lx-%lx => %lx-%lx\n",
+ res->start, res->end, region->start, region->end);
+#endif
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+/*
+ * translate PCI bus addresses to Linuxcentric addresses
+ */
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
+{
+ if (res->flags & IORESOURCE_IO) {
+ res->start = (region->start & 0x00ffffff) | 0xbe000000;
+ res->end = (region->end & 0x00ffffff) | 0xbe000000;
+ }
+
+ if (res->flags & IORESOURCE_MEM) {
+ res->start = (region->start & 0x03ffffff) | 0xb8000000;
+ res->end = (region->end & 0x03ffffff) | 0xb8000000;
+ }
+
+#if 0
+ printk(KERN_INFO "BUS->RES: %lx-%lx => %lx-%lx\n",
+ region->start, region->end, res->start, res->end);
+#endif
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/*
+ *
+ */
+static int pci_ampci_read_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *_value)
+{
+ u32 rawval, value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ value = BRIDGEREGB(where);
+ __pcbdebug("=> %02hx", &BRIDGEREGL(where), value);
+ } else {
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ value = CONFIG_DATAB(where);
+ if (__query(bus, devfn))
+ __pcidebug("=> %02hx", bus, devfn, where, value);
+ }
+
+ *_value = value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *_value)
+{
+ u32 rawval, value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ value = BRIDGEREGW(where);
+ __pcbdebug("=> %04hx", &BRIDGEREGL(where), value);
+ } else {
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ value = CONFIG_DATAW(where);
+ if (__query(bus, devfn))
+ __pcidebug("=> %04hx", bus, devfn, where, value);
+ }
+
+ *_value = value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *_value)
+{
+ u32 rawval, value;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ value = BRIDGEREGL(where);
+ __pcbdebug("=> %08x", &BRIDGEREGL(where), value);
+ } else {
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ value = CONFIG_DATAL(where);
+ if (__query(bus, devfn))
+ __pcidebug("=> %08x", bus, devfn, where, value);
+ }
+
+ *_value = value;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 value)
+{
+ u32 rawval;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __pcbdebug("<= %02x", &BRIDGEREGB(where), value);
+ BRIDGEREGB(where) = value;
+ } else {
+ if (bus->number == 0 &&
+ (devfn == PCI_DEVFN(2, 0) && devfn == PCI_DEVFN(3, 0))
+ )
+ __pcidebug("<= %02x", bus, devfn, where, value);
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ CONFIG_DATAB(where) = value;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 value)
+{
+ u32 rawval;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __pcbdebug("<= %04hx", &BRIDGEREGW(where), value);
+ BRIDGEREGW(where) = value;
+ } else {
+ if (__query(bus, devfn))
+ __pcidebug("<= %04hx", bus, devfn, where, value);
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ CONFIG_DATAW(where) = value;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 value)
+{
+ u32 rawval;
+
+ if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
+ __pcbdebug("<= %08x", &BRIDGEREGL(where), value);
+ BRIDGEREGL(where) = value;
+ } else {
+ if (__query(bus, devfn))
+ __pcidebug("<= %08x", bus, devfn, where, value);
+ CONFIG_ADDRESS = CONFIG_CMD(bus, devfn, where);
+ rawval = CONFIG_ADDRESS;
+ CONFIG_DATAL(where) = value;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_ampci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ switch (size) {
+ case 1:
+ return pci_ampci_read_config_byte(bus, devfn, where, val);
+ case 2:
+ return pci_ampci_read_config_word(bus, devfn, where, val);
+ case 4:
+ return pci_ampci_read_config_dword(bus, devfn, where, val);
+ default:
+ BUG();
+ return -EOPNOTSUPP;
+ }
+}
+
+static int pci_ampci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return pci_ampci_write_config_byte(bus, devfn, where, val);
+ case 2:
+ return pci_ampci_write_config_word(bus, devfn, where, val);
+ case 4:
+ return pci_ampci_write_config_dword(bus, devfn, where, val);
+ default:
+ BUG();
+ return -EOPNOTSUPP;
+ }
+}
+
+static struct pci_ops pci_direct_ampci = {
+ pci_ampci_read_config,
+ pci_ampci_write_config,
+};
+
+/*
+ * Before we decide to use direct hardware access mechanisms, we try to do some
+ * trivial checks to ensure it at least _seems_ to be working -- we just test
+ * whether bus 00 contains a host bridge (this is similar to checking
+ * techniques used in XFree86, but ours should be more reliable since we
+ * attempt to make use of direct access hints provided by the PCI BIOS).
+ *
+ * This should be close to trivial, but it isn't, because there are buggy
+ * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
+ */
+static int __init pci_sanity_check(struct pci_ops *o)
+{
+ struct pci_bus bus; /* Fake bus and device */
+ u32 x;
+
+ bus.number = 0;
+
+ if ((!o->read(&bus, 0, PCI_CLASS_DEVICE, 2, &x) &&
+ (x == PCI_CLASS_BRIDGE_HOST || x == PCI_CLASS_DISPLAY_VGA)) ||
+ (!o->read(&bus, 0, PCI_VENDOR_ID, 2, &x) &&
+ (x == PCI_VENDOR_ID_INTEL || x == PCI_VENDOR_ID_COMPAQ)))
+ return 1;
+
+ printk(KERN_ERROR "PCI: Sanity check failed\n");
+ return 0;
+}
+
+static int __init pci_check_direct(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /*
+ * Check if access works.
+ */
+ if (pci_sanity_check(&pci_direct_ampci)) {
+ local_irq_restore(flags);
+ printk(KERN_INFO "PCI: Using configuration ampci\n");
+ request_mem_region(0xBE040000, 256, "AMPCI bridge");
+ request_mem_region(0xBFFFFFF4, 12, "PCI ampci");
+ return 0;
+ }
+
+ local_irq_restore(flags);
+ return -ENODEV;
+}
+
+static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
+{
+ unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
+ struct resource *devr = &dev->resource[idx];
+
+ if (dev->bus) {
+ for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+ struct resource *busr = dev->bus->resource[i];
+
+ if (!busr || (busr->flags ^ devr->flags) & type_mask)
+ continue;
+
+ if (devr->start &&
+ devr->start >= busr->start &&
+ devr->end <= busr->end)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+ struct pci_bus_region region;
+ int i;
+ int limit;
+
+ if (dev->bus->number != 0)
+ return;
+
+ limit = (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) ?
+ PCI_BRIDGE_RESOURCES : PCI_NUM_RESOURCES;
+
+ for (i = 0; i < limit; i++) {
+ if (!dev->resource[i].flags)
+ continue;
+
+ region.start = dev->resource[i].start;
+ region.end = dev->resource[i].end;
+ pcibios_bus_to_resource(dev, &dev->resource[i], ®ion);
+ if (is_valid_resource(dev, i))
+ pci_claim_resource(dev, i);
+ }
+}
+
+/*
+ * Called after each bus is probed, but before its children
+ * are examined.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ if (bus->self) {
+ pci_read_bridge_bases(bus);
+ pcibios_fixup_device_resources(bus->self);
+ }
+
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ pcibios_fixup_device_resources(dev);
+}
+
+/*
+ * Initialization. Try all known PCI access methods. Note that we support
+ * using both PCI BIOS and direct access: in such cases, we use I/O ports
+ * to access config space, but we still keep BIOS order of cards to be
+ * compatible with 2.0.X. This should go away some day.
+ */
+static int __init pcibios_init(void)
+{
+ ioport_resource.start = 0xA0000000;
+ ioport_resource.end = 0xDFFFFFFF;
+ iomem_resource.start = 0xA0000000;
+ iomem_resource.end = 0xDFFFFFFF;
+
+ if (!pci_probe)
+ return 0;
+
+ if (pci_check_direct() < 0) {
+ printk(KERN_WARNING "PCI: No PCI bus detected\n");
+ return 0;
+ }
+
+ printk(KERN_INFO "PCI: Probing PCI hardware [mempage %08x]\n",
+ MEM_PAGING_REG);
+
+ {
+#if 0
+ static struct pci_bus am33_root_bus = {
+ .children = LIST_HEAD_INIT(am33_root_bus.children),
+ .devices = LIST_HEAD_INIT(am33_root_bus.devices),
+ .number = 0,
+ .secondary = 0,
+ .resource = { &ioport_resource, &iomem_resource },
+ };
+
+ am33_root_bus.ops = pci_root_ops;
+ list_add_tail(&am33_root_bus.node, &pci_root_buses);
+
+ am33_root_bus.subordinate = pci_do_scan_bus(0);
+
+ pci_root_bus = &am33_root_bus;
+#else
+ pci_root_bus = pci_scan_bus(0, &pci_direct_ampci, NULL);
+#endif
+ }
+
+ pcibios_irq_init();
+ pcibios_fixup_irqs();
+#if 0
+ pcibios_resource_survey();
+#endif
+ return 0;
+}
+
+arch_initcall(pcibios_init);
+
+char *__init pcibios_setup(char *str)
+{
+ if (!strcmp(str, "off")) {
+ pci_probe = 0;
+ return NULL;
+
+ } else if (!strncmp(str, "lastbus=", 8)) {
+ pcibios_last_bus = simple_strtol(str+8, NULL, 0);
+ return NULL;
+ }
+
+ return str;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ int err;
+
+ err = pcibios_enable_resources(dev, mask);
+ if (err == 0)
+ pcibios_enable_irq(dev);
+ return err;
+}
+
+/*
+ * disable the ethernet chipset
+ */
+static void __init unit_disable_pcnet(struct pci_bus *bus, struct pci_ops *o)
+{
+ u32 x;
+
+ bus->number = 0;
+
+ o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x);
+ x |= PCI_COMMAND_MASTER |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+ o->write(bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, x);
+ o->read (bus, PCI_DEVFN(2, 0), PCI_COMMAND, 2, &x);
+ o->write(bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0, 4, 0x00030001);
+ o->read (bus, PCI_DEVFN(2, 0), PCI_BASE_ADDRESS_0, 4, &x);
+
+#define RDP (*(volatile u32 *) 0xBE030010)
+#define RAP (*(volatile u32 *) 0xBE030014)
+#define __set_RAP(X) do { RAP = (X); x = RAP; } while (0)
+#define __set_RDP(X) do { RDP = (X); x = RDP; } while (0)
+#define __get_RDP() ({ RDP & 0xffff; })
+
+ __set_RAP(0);
+ __set_RDP(0x0004); /* CSR0 = STOP */
+
+ __set_RAP(88); /* check CSR88 indicates an Am79C973 */
+ BUG_ON(__get_RDP() != 0x5003);
+
+ for (x = 0; x < 100; x++)
+ asm volatile("nop");
+
+ __set_RDP(0x0004); /* CSR0 = STOP */
+}
+
+/*
+ * initialise the unit hardware
+ */
+asmlinkage void __init unit_pci_init(void)
+{
+ struct pci_bus bus; /* Fake bus and device */
+ struct pci_ops *o = &pci_direct_ampci;
+ u32 x;
+
+ set_intr_level(XIRQ1, GxICR_LEVEL_3);
+
+ memset(&bus, 0, sizeof(bus));
+
+ MEM_PAGING_REG = 0xE8000000;
+
+ /* we need to set up the bridge _now_ or we won't be able to access the
+ * PCI config registers
+ */
+ BRIDGEREGW(PCI_COMMAND) |=
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO | PCI_COMMAND_MASTER;
+ BRIDGEREGW(PCI_STATUS) = 0xF800;
+ BRIDGEREGB(PCI_LATENCY_TIMER) = 0x10;
+ BRIDGEREGL(PCI_BASE_ADDRESS_0) = 0x80000000;
+ BRIDGEREGB(PCI_INTERRUPT_LINE) = 1;
+ BRIDGEREGL(0x48) = 0x98000000; /* AMPCI base addr */
+ BRIDGEREGB(0x41) = 0x00; /* secondary bus
+ * number */
+ BRIDGEREGB(0x42) = 0x01; /* subordinate bus
+ * number */
+ BRIDGEREGB(0x44) = 0x01;
+ BRIDGEREGL(0x50) = 0x00000001;
+ BRIDGEREGL(0x58) = 0x00001002;
+ BRIDGEREGL(0x5C) = 0x00000011;
+
+ /* we also need to set up the PCI-PCI bridge */
+ bus.number = 0;
+
+ /* IO: 0x00000000-0x00020000 */
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_COMMAND, 2, &x);
+ x |= PCI_COMMAND_MASTER |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
+ PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_COMMAND, 2, x);
+
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, &x);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, &x);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, &x);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, &x);
+
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, 0x01);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE, 1, &x);
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, 0x00020000);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_IO_BASE_UPPER16, 4, &x);
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, 0xEBB0EA00);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_MEMORY_BASE, 4, &x);
+ o->write(&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, 0xE9F0E800);
+ o->read (&bus, PCI_DEVFN(3, 0), PCI_PREF_MEMORY_BASE, 4, &x);
+
+ unit_disable_pcnet(&bus, o);
+}
--- /dev/null
+/* ASB2305 Initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/cpu/intctl-regs.h>
+#include <asm/cpu/rtc-regs.h>
+#include <asm/cpu/serial-regs.h>
+#include <asm/unit/serial.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+ /* set the 16550 interrupt line to level 3 if not being used for GDB */
+ set_intr_level(XIRQ0, GxICR_LEVEL_3);
+#endif
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+#ifdef CONFIG_PCI
+ unit_pci_init();
+#endif
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+ unsigned int extnum;
+
+ for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+ switch (GET_XIRQ_TRIGGER(extnum)) {
+ case XIRQ_TRIGGER_HILEVEL:
+ case XIRQ_TRIGGER_LOWLEVEL:
+ set_irq_handler(XIRQ2IRQ(extnum), handle_level_irq);
+ break;
+ default:
+ break;
+ }
+ }
+}
/*
- * $Id: analog.c,v 1.68 2002/01/22 20:18:32 vojtech Exp $
- *
* Copyright (c) 1996-2001 Vojtech Pavlik
*/
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "PCC"
+#elif defined(CONFIG_MN10300)
+#define GET_TIME(x) do { x = get_cycles(); } while (0)
+#define DELTA(x, y) ((x) - (y))
+#define TIME_NAME "TSC"
#else
#define FAKE_TIME
static unsigned long analog_faketime = 0;
tristate "SMC 91C9x/91C1xxx support"
select CRC32
select MII
- depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BLACKFIN
+ depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \
+ SOC_AU1X00 || BLACKFIN || MN10300
help
This is a driver for SMC's 91x series of Ethernet chipsets,
including the SMC91C94 and the SMC91C111. Say Y if you want it
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
#define SMC_IRQ_FLAGS (-1) /* from resource */
+#elif defined(CONFIG_MN10300)
+
+/*
+ * MN10300/AM33 configuration
+ */
+
+#include <asm/unit/smc91111.h>
+
#else
+/*
+ * Default configuration
+ */
+
#define SMC_CAN_USE_8BIT 1
#define SMC_CAN_USE_16BIT 1
#define SMC_CAN_USE_32BIT 1
config PARPORT_PC
tristate "PC-style hardware"
- depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && (!M68K || ISA)
+ depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
+ (!M68K || ISA) && !MN10300
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
obj-$(CONFIG_PPC) += setup-bus.o
obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
obj-$(CONFIG_X86_VISWS) += setup-irq.o
+obj-$(CONFIG_MN10300) += setup-bus.o
#
# ACPI Related PCI FW Functions
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BLACKFIN && !AVR32 && !MN10300
default y
help
Saying Y here will allow you to use Linux in text mode through a
--- /dev/null
+proc
+unit
--- /dev/null
+include include/asm-generic/Kbuild.asm
+
+unifdef-y += termios.h
+unifdef-y += ptrace.h
+unifdef-y += page.h
--- /dev/null
+/* MN10300 Atomic counter operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct {
+ int counter;
+} atomic_t;
+
+#define ATOMIC_INIT(i) { (i) }
+
+#ifdef __KERNEL__
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v. Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_read(v) ((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i. Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#include <asm/system.h>
+
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int temp;
+
+ local_irq_save(flags);
+ temp = v->counter;
+ temp += i;
+ v->counter = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int temp;
+
+ local_irq_save(flags);
+ temp = v->counter;
+ temp -= i;
+ v->counter = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+ return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+ atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+ atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+ atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+
+#define atomic_add_unless(v, a, u) \
+({ \
+ int c, old; \
+ c = atomic_read(v); \
+ while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+ c = old; \
+ c != (u); \
+})
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+ unsigned long flags;
+
+ mask = ~mask;
+ local_irq_save(flags);
+ *addr &= mask;
+ local_irq_restore(flags);
+}
+
+#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+
+/* Atomic operations are already serializing on MN10300??? */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ATOMIC_H */
--- /dev/null
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif
--- /dev/null
+/* MN10300 bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+#ifndef __ASM_BITOPS_H
+#define __ASM_BITOPS_H
+
+#include <asm/cpu-regs.h>
+
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+/*
+ * set bit
+ */
+#define __set_bit(nr, addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bset %2,(%1) # set_bit reg" \
+ : "=m"(*_a) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+})
+
+#define set_bit(nr, addr) __set_bit((nr), (addr))
+
+/*
+ * clear bit
+ */
+#define ___clear_bit(nr, addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bclr %2,(%1) # clear_bit reg" \
+ : "=m"(*_a) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+})
+
+#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
+
+
+static inline void __clear_bit(int nr, volatile void *addr)
+{
+ unsigned int *a = (unsigned int *) addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a &= ~mask;
+}
+
+/*
+ * test bit
+ */
+static inline int test_bit(int nr, const volatile void *addr)
+{
+ return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/*
+ * change bit
+ */
+static inline void __change_bit(int nr, volatile void *addr)
+{
+ int mask;
+ unsigned int *a = (unsigned int *) addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a ^= mask;
+}
+
+extern void change_bit(int nr, volatile void *addr);
+
+/*
+ * test and set bit
+ */
+#define __test_and_set_bit(nr,addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ unsigned epsw; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bset %3,(%2) # test_set_bit reg\n" \
+ "mov epsw,%1" \
+ : "=m"(*_a), "=d"(epsw) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+ \
+ !(epsw & EPSW_FLAG_Z); \
+})
+
+#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr))
+
+/*
+ * test and clear bit
+ */
+#define __test_and_clear_bit(nr, addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ unsigned epsw; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bclr %3,(%2) # test_clear_bit reg\n" \
+ "mov epsw,%1" \
+ : "=m"(*_a), "=d"(epsw) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+ \
+ !(epsw & EPSW_FLAG_Z); \
+})
+
+#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr))
+
+/*
+ * test and change bit
+ */
+static inline int __test_and_change_bit(int nr, volatile void *addr)
+{
+ int mask, retval;
+ unsigned int *a = (unsigned int *)addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ retval = (mask & *a) != 0;
+ *a ^= mask;
+
+ return retval;
+}
+
+extern int test_and_change_bit(int nr, volatile void *addr);
+
+#include <asm-generic/bitops/lock.h>
+
+#ifdef __KERNEL__
+
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+unsigned long __ffs(unsigned long x)
+{
+ int bit;
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
+ return bit;
+}
+
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+ int bit;
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
+ return bit;
+}
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls(int x)
+{
+ return (x != 0) ? __ilog2_u32(x) + 1 : 0;
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+ /* Note: (x & -x) gives us a mask that is the least significant
+ * (rightmost) 1-bit of the value in x.
+ */
+ return fls(x & -x);
+}
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+ test_and_set_bit((nr) ^ 0x18, (addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+ test_and_clear_bit((nr) ^ 0x18, (addr))
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_BITOPS_H */
--- /dev/null
+/* MN10300 Kernel bug reporting
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+/*
+ * Tell the user there is some problem.
+ */
+#define _debug_bug_trap() \
+do { \
+ asm volatile( \
+ " syscall 15 \n" \
+ "0: \n" \
+ " .section __bug_table,\"a\" \n" \
+ " .long 0b,%0,%1 \n" \
+ " .previous \n" \
+ : \
+ : "i"(__FILE__), "i"(__LINE__) \
+ ); \
+} while (0)
+
+#define BUG() _debug_bug_trap()
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_BUG_H */
--- /dev/null
+/* MN10300 Checks for architecture-dependent bugs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <asm/processor.h>
+
+static inline void __init check_bugs(void)
+{
+}
+
+#endif /* _ASM_BUGS_H */
--- /dev/null
+/* AM33v2 on-board bus controller registers
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* bus controller registers */
+#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */
+#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */
+#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */
+#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */
+#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */
+#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */
+#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */
+#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */
+#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */
+#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */
+#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */
+#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */
+#define BCCR_API 0x00070000 /* bus arbitration priority */
+#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */
+#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */
+#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */
+#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */
+#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */
+#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */
+#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */
+#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */
+#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */
+#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */
+#define BCCR_TMON 0x03000000 /* timeout value settings */
+#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */
+#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */
+#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */
+#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */
+#define BCCR_TMOE 0x10000000 /* timeout detection enable */
+
+#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */
+#define BCBERR_BESB 0x0000001f /* erroneous access destination space */
+#define BCBERR_BESB_MON 0x00000001 /* - monitor space */
+#define BCBERR_BESB_IO 0x00000002 /* - IO bus */
+#define BCBERR_BESB_EX 0x00000004 /* - EX bus */
+#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */
+#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */
+#define BCBERR_BERW 0x00000100 /* type of access */
+#define BCBERR_BERW_WRITE 0x00000000 /* - write */
+#define BCBERR_BERW_READ 0x00000100 /* - read */
+#define BCBERR_BESD 0x00000200 /* error detector */
+#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */
+#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */
+#define BCBERR_BEBST 0x00000400 /* type of access */
+#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */
+#define BCBERR_BEBST_BURST 0x00000400 /* - burst */
+#define BCBERR_BEME 0x00000800 /* multiple bus error flag */
+#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */
+#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */
+#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */
+#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */
+#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */
+
+#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */
+
+/* system bus controller registers */
+#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */
+#define SBBASE_BE 0x00000001 /* bank enable */
+#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */
+#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */
+
+#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */
+#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */
+#define SBCNTRL0_REH 0x0000f000 /* read enable hold */
+#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */
+#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */
+#define SBCNTRL0_DAH 0x0f000000 /* data hold */
+#define SBCNTRL0_ADH 0xf0000000 /* address hold */
+
+#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */
+#define SBCNTRL1_WED 0x00000f00 /* write enable delay */
+#define SBCNTRL1_RED 0x0000f000 /* read enable delay */
+#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */
+#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */
+#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */
+#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */
+
+#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */
+#define SBCNTRL2_WC 0x000000ff /* wait count */
+#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */
+#define SBCNTRL2_WM 0x01000000 /* wait mode setting */
+#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */
+#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */
+#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */
+#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */
+#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */
+#define SBCNTRL2_BW 0x04000000 /* bus width */
+#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */
+#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */
+#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */
+#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */
+#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */
+#define SBCNTRL2_BT 0x70000000 /* bus type setting */
+#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */
+#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */
+#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */
+#define SBCNTRL2_BTSE 0x80000000 /* burst enable */
+
+/* memory bus controller */
+#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */
+#define SDBASE_CE 0x00000001 /* chip enable */
+#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */
+#define SDBASE_CBAM_SHIFT 16
+#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */
+
+#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */
+#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */
+#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */
+#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */
+#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */
+#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */
+#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */
+#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */
+#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */
+#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */
+#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */
+#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */
+#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */
+#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */
+#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */
+#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */
+
+#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */
+#define SDREFCNT_PERI 0x00000fff /* refresh period */
+
+#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BUSCTL_REGS_H */
--- /dev/null
+/* MN10300 Byte-order primitive construction
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+static inline __attribute__((const))
+__u32 ___arch__swab32(__u32 x)
+{
+ __u32 ret;
+ asm("swap %1,%0" : "=r" (ret) : "r" (x));
+ return ret;
+}
+
+static inline __attribute__((const))
+__u16 ___arch__swab16(__u16 x)
+{
+ __u16 ret;
+ asm("swaph %1,%0" : "=r" (ret) : "r" (x));
+ return ret;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
--- /dev/null
+/* MN10300 cache management registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <asm/cpu-regs.h>
+#include <asm/proc/cache.h>
+
+#ifndef __ASSEMBLY__
+#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+#else
+#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES
+#endif
+
+/* data cache purge registers
+ * - read from the register to unconditionally purge that cache line
+ * - write address & 0xffffff00 to conditionally purge that cache line
+ * - clear LSB to request invalidation as well
+ */
+#define DCACHE_PURGE(WAY, ENTRY) \
+ __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \
+ (ENTRY) * L1_CACHE_BYTES, u32)
+
+#define DCACHE_PURGE_WAY0(ENTRY) \
+ __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY1(ENTRY) \
+ __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY2(ENTRY) \
+ __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY3(ENTRY) \
+ __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+
+/* instruction cache access registers */
+#define ICACHE_DATA(WAY, ENTRY, OFF) \
+ __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define ICACHE_TAG(WAY, ENTRY) \
+ __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+/* instruction cache access registers */
+#define DCACHE_DATA(WAY, ENTRY, OFF) \
+ __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define DCACHE_TAG(WAY, ENTRY) \
+ __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+#endif /* _ASM_CACHE_H */
--- /dev/null
+/* MN10300 Cache flushing
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+/* Keep includes the same across arches. */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache managment (our cache is physically indexed)
+ */
+#define flush_cache_all() do {} while (0)
+#define flush_cache_mm(mm) do {} while (0)
+#define flush_cache_dup_mm(mm) do {} while (0)
+#define flush_cache_range(mm, start, end) do {} while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do {} while (0)
+#define flush_cache_vmap(start, end) do {} while (0)
+#define flush_cache_vunmap(start, end) do {} while (0)
+#define flush_dcache_page(page) do {} while (0)
+#define flush_dcache_mmap_lock(mapping) do {} while (0)
+#define flush_dcache_mmap_unlock(mapping) do {} while (0)
+
+/*
+ * physically-indexed cache managment
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
+
+#else
+
+#define flush_icache_range(start, end) do {} while (0)
+#define flush_icache_page(vma, pg) do {} while (0)
+
+#endif
+
+#define flush_icache_user_range(vma, pg, adr, len) \
+ flush_icache_range(adr, adr + len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ do { \
+ memcpy(dst, src, len); \
+ flush_icache_page(vma, page); \
+ } while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+/*
+ * primitive routines
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern void mn10300_icache_inv(void);
+extern void mn10300_dcache_inv(void);
+extern void mn10300_dcache_inv_page(unsigned start);
+extern void mn10300_dcache_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_inv_range2(unsigned start, unsigned size);
+#ifdef CONFIG_MN10300_CACHE_WBACK
+extern void mn10300_dcache_flush(void);
+extern void mn10300_dcache_flush_page(unsigned start);
+extern void mn10300_dcache_flush_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_range2(unsigned start, unsigned size);
+extern void mn10300_dcache_flush_inv(void);
+extern void mn10300_dcache_flush_inv_page(unsigned start);
+extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
+#else
+#define mn10300_dcache_flush() do {} while (0)
+#define mn10300_dcache_flush_page(start) do {} while (0)
+#define mn10300_dcache_flush_range(start, end) do {} while (0)
+#define mn10300_dcache_flush_range2(start, size) do {} while (0)
+#define mn10300_dcache_flush_inv() mn10300_dcache_inv()
+#define mn10300_dcache_flush_inv_page(start) \
+ mn10300_dcache_inv_page((start))
+#define mn10300_dcache_flush_inv_range(start, end) \
+ mn10300_dcache_inv_range((start), (end))
+#define mn10300_dcache_flush_inv_range2(start, size) \
+ mn10300_dcache_inv_range2((start), (size))
+#endif /* CONFIG_MN10300_CACHE_WBACK */
+#else
+#define mn10300_icache_inv() do {} while (0)
+#define mn10300_dcache_inv() do {} while (0)
+#define mn10300_dcache_inv_page(start) do {} while (0)
+#define mn10300_dcache_inv_range(start, end) do {} while (0)
+#define mn10300_dcache_inv_range2(start, size) do {} while (0)
+#define mn10300_dcache_flush() do {} while (0)
+#define mn10300_dcache_flush_inv_page(start) do {} while (0)
+#define mn10300_dcache_flush_inv() do {} while (0)
+#define mn10300_dcache_flush_inv_range(start, end) do {} while (0)
+#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0)
+#define mn10300_dcache_flush_page(start) do {} while (0)
+#define mn10300_dcache_flush_range(start, end) do {} while (0)
+#define mn10300_dcache_flush_range2(start, size) do {} while (0)
+#endif /* CONFIG_MN10300_CACHE_DISABLED */
+
+/*
+ * internal debugging function
+ */
+#ifdef CONFIG_DEBUG_PAGEALLOC
+extern void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_CACHEFLUSH_H */
--- /dev/null
+/* MN10300 Optimised checksumming code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+extern __wsum csum_partial_copy_from_user(const void *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr);
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define csum_partial_copy_fromuser csum_partial_copy
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+ __wsum sum);
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ asm(
+ " add %1,%0 \n"
+ " addc 0xffff,%0 \n"
+ : "=r" (sum)
+ : "r" (sum << 16), "0" (sum & 0xffff0000)
+ : "cc"
+ );
+ return (~sum) >> 16;
+}
+
+static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ __wsum tmp;
+
+ tmp = (__wsum) ntohs(len) << 16;
+ tmp += (__wsum) proto << 8;
+
+ asm(
+ " add %1,%0 \n"
+ " addc %2,%0 \n"
+ " addc %3,%0 \n"
+ " addc 0,%0 \n"
+ : "=r" (sum)
+ : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum)
+ : "cc"
+ );
+ return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+#undef _HAVE_ARCH_IPV6_CSUM
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len,
+ __wsum sum, int *err_ptr);
+
+
+#endif /* _ASM_CHECKSUM_H */
--- /dev/null
+/* MN10300 Core system registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CPU_REGS_H
+#define _ASM_CPU_REGS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#ifdef CONFIG_MN10300_CPU_AM33V2
+/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
+ * the FP regs, but tell the assembler that we're actually allowed AM33v2
+ * instructions */
+#ifndef __ASSEMBLY__
+asm(" .am33_2\n");
+#else
+.am33_2
+#endif
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
+#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR))
+#else
+#define __SYSREG(ADDR, TYPE) ADDR
+#define __SYSREGC(ADDR, TYPE) ADDR
+#endif
+
+/* CPU registers */
+#define EPSW_FLAG_Z 0x00000001 /* zero flag */
+#define EPSW_FLAG_N 0x00000002 /* negative flag */
+#define EPSW_FLAG_C 0x00000004 /* carry flag */
+#define EPSW_FLAG_V 0x00000008 /* overflow flag */
+#define EPSW_IM 0x00000700 /* interrupt mode */
+#define EPSW_IM_0 0x00000000 /* interrupt mode 0 */
+#define EPSW_IM_1 0x00000100 /* interrupt mode 1 */
+#define EPSW_IM_2 0x00000200 /* interrupt mode 2 */
+#define EPSW_IM_3 0x00000300 /* interrupt mode 3 */
+#define EPSW_IM_4 0x00000400 /* interrupt mode 4 */
+#define EPSW_IM_5 0x00000500 /* interrupt mode 5 */
+#define EPSW_IM_6 0x00000600 /* interrupt mode 6 */
+#define EPSW_IM_7 0x00000700 /* interrupt mode 7 */
+#define EPSW_IE 0x00000800 /* interrupt enable */
+#define EPSW_S 0x00003000 /* software auxilliary bits */
+#define EPSW_T 0x00008000 /* trace enable */
+#define EPSW_nSL 0x00010000 /* not supervisor level */
+#define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */
+#define EPSW_nAR 0x00040000 /* register bank control */
+#define EPSW_ML 0x00080000 /* monitor level */
+#define EPSW_FE 0x00100000 /* FPU enable */
+
+/* FPU registers */
+#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */
+#define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */
+#define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */
+#define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */
+#define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */
+#define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */
+#define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */
+#define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */
+#define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */
+#define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */
+#define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */
+#define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */
+#define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */
+#define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */
+#define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */
+#define FPCR_RM 0x00030000 /* rounding mode */
+#define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */
+#define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */
+#define FPCR_FCC_E 0x00080000 /* FPU equal condition code */
+#define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */
+#define FPCR_FCC_L 0x00200000 /* FPU less than condition code */
+#define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */
+
+/* CPU control registers */
+#define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */
+#define CPUP_DWBD 0x0020 /* write buffer disable flag */
+#define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */
+#define CPUP_EXM 0x0080 /* exception operation mode */
+#define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */
+#define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */
+
+#define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */
+#define CPUM_SLEEP 0x0004 /* set to enter sleep state */
+#define CPUM_HALT 0x0008 /* set to enter halt state */
+#define CPUM_STOP 0x0010 /* set to enter stop state */
+
+#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */
+#define CPUREV_TYPE 0x0000000f /* CPU type */
+#define CPUREV_TYPE_S 0
+#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */
+#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */
+#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */
+#define CPUREV_REVISION 0x000000f0 /* CPU revision */
+#define CPUREV_REVISION_S 4
+#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */
+#define CPUREV_ICWAY_S 8
+#define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */
+#define CPUREV_ICSIZE_S 12
+#define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */
+#define CPUREV_DCWAY_S 16
+#define CPUREV_DCSIZE 0x00f00000 /* data cache way size */
+#define CPUREV_DCSIZE_S 20
+#define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */
+#define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */
+#define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */
+
+#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */
+
+/* interrupt/exception control registers */
+#define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */
+#define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */
+#define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */
+#define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */
+#define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */
+#define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */
+#define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */
+
+#define TBR __SYSREG(0xc0000024, u32) /* Trap table base */
+#define TBR_TB 0xff000000 /* table base address bits 31-24 */
+#define TBR_INT_CODE 0x00ffffff /* interrupt code */
+
+#define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */
+
+#define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */
+#define sISR_IRQICE 0x00000001 /* ICE interrupt */
+#define sISR_ISTEP 0x00000002 /* single step interrupt */
+#define sISR_MISSA 0x00000004 /* memory access address misalignment fault */
+#define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */
+#define sISR_PIEXE 0x00000010 /* program interrupt */
+#define sISR_MEMERR 0x00000020 /* illegal memory access fault */
+#define sISR_IBREAK 0x00000040 /* instraction break interrupt */
+#define sISR_DBSRL 0x00000080 /* debug serial interrupt */
+#define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */
+#define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */
+#define sISR_OBREAK 0x00000400 /* operand break interrupt */
+#define sISR_PRIV 0x00000800 /* privileged instruction execution fault */
+#define sISR_BUSERR 0x00001000 /* bus error fault */
+#define sISR_DBLFT 0x00002000 /* double fault */
+#define sISR_DBG 0x00008000 /* debug reserved interrupt */
+#define sISR_ITMISS 0x00010000 /* instruction TLB miss */
+#define sISR_DTMISS 0x00020000 /* data TLB miss */
+#define sISR_ITEX 0x00040000 /* instruction TLB access exception */
+#define sISR_DTEX 0x00080000 /* data TLB access exception */
+#define sISR_ILGIA 0x00100000 /* illegal instruction access exception */
+#define sISR_ILGDA 0x00200000 /* illegal data access exception */
+#define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */
+#define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */
+#define sISR_PRIDA 0x01000000 /* privileged space data access excep */
+#define sISR_DISA 0x02000000 /* data space instruction access excep */
+#define sISR_SYSC 0x04000000 /* system call instruction excep */
+#define sISR_FPUD 0x08000000 /* FPU disabled excep */
+#define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */
+#define sISR_FPUOP 0x20000000 /* FPU operation excep */
+#define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */
+
+/* cache control registers */
+#define CHCTR __SYSREG(0xc0000070, u16) /* cache control */
+#define CHCTR_ICEN 0x0001 /* instruction cache enable */
+#define CHCTR_DCEN 0x0002 /* data cache enable */
+#define CHCTR_ICBUSY 0x0004 /* instruction cache busy */
+#define CHCTR_DCBUSY 0x0008 /* data cache busy */
+#define CHCTR_ICINV 0x0010 /* instruction cache invalidate */
+#define CHCTR_DCINV 0x0020 /* data cache invalidate */
+#define CHCTR_DCWTMD 0x0040 /* data cache writing mode */
+#define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */
+#define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */
+#define CHCTR_DCALMD 0x0080 /* data cache allocation mode */
+#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */
+#define CHCTR_DCWMD 0xf000 /* data cache way mode */
+
+/* MMU control registers */
+#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */
+#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */
+#define MMUCTR_ITE 0x00000040 /* instruction TLB enable */
+#define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */
+#define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */
+#define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */
+#define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */
+#define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */
+#define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */
+#define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */
+#define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */
+#define MMUCTR_CE 0x00008000 /* cacheable bit enable */
+#define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */
+#define MMUCTR_DTE 0x00400000 /* data TLB enable */
+#define MMUCTR_DIV 0x00800000 /* data TLB invalidate */
+#define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */
+#define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */
+#define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */
+#define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */
+#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */
+#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */
+#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */
+
+#define PIDR __SYSREG(0xc0000094, u16) /* PID register */
+#define PIDR_PID 0x00ff /* process identifier */
+
+#define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */
+
+#define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */
+#define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */
+#define xPTEL_V 0x00000001 /* TLB entry valid */
+#define xPTEL_UNUSED1 0x00000002 /* unused bit */
+#define xPTEL_UNUSED2 0x00000004 /* unused bit */
+#define xPTEL_C 0x00000008 /* cached if set */
+#define xPTEL_PV 0x00000010 /* page valid */
+#define xPTEL_D 0x00000020 /* dirty */
+#define xPTEL_PR 0x000001c0 /* page protection */
+#define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */
+#define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */
+#define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */
+#define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */
+#define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */
+#define xPTEL_G 0x00000200 /* global (use PID if 0) */
+#define xPTEL_PS 0x00000c00 /* page size */
+#define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */
+#define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */
+#define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */
+#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */
+#define xPTEL_PPN 0xfffff006 /* physical page number */
+
+#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */
+#define xPTEL_UNUSED1_BIT 1
+#define xPTEL_UNUSED2_BIT 2
+#define xPTEL_C_BIT 3
+#define xPTEL_PV_BIT 4
+#define xPTEL_D_BIT 5
+#define xPTEL_G_BIT 9
+
+#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */
+#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */
+#define xPTEU_VPN 0xfffffc00 /* virtual page number */
+#define xPTEU_PID 0x000000ff /* process identifier to which applicable */
+
+#define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */
+#define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */
+#define xPTEL2_V 0x00000001 /* TLB entry valid */
+#define xPTEL2_C 0x00000002 /* cacheable */
+#define xPTEL2_PV 0x00000004 /* page valid */
+#define xPTEL2_D 0x00000008 /* dirty */
+#define xPTEL2_PR 0x00000070 /* page protection */
+#define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */
+#define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */
+#define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */
+#define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */
+#define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */
+#define xPTEL2_G 0x00000080 /* global (use PID if 0) */
+#define xPTEL2_PS 0x00000300 /* page size */
+#define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */
+#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */
+#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */
+#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */
+#define xPTEL2_PPN 0xfffffc00 /* physical page number */
+
+#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */
+#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */
+#define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */
+#define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */
+#define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */
+#define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */
+#define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */
+#define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */
+#define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */
+#define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */
+#define MMUFCR_xFC_TYPE 0x0020 /* access type flag */
+#define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */
+#define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */
+#define MMUFCR_xFC_PR 0x01c0 /* page protection flag */
+#define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */
+#define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */
+#define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */
+#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_CPU_REGS_H */
--- /dev/null
+#include <asm-generic/cputime.h>
--- /dev/null
+/* MN10300 Current task structure accessor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+/*
+ * dedicate E2 to keeping the current task pointer
+ */
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+
+register struct task_struct *const current asm("e2") __attribute__((used));
+
+#define get_current() current
+
+extern struct task_struct *__current;
+
+#else
+static inline __attribute__((const))
+struct task_struct *get_current(void)
+{
+ return current_thread_info()->task;
+}
+
+#define current get_current()
+#endif
+
+#endif /* _ASM_CURRENT_H */
--- /dev/null
+/* MN10300 Uninterruptible delay routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* _ASM_DELAY_H */
--- /dev/null
+#include <asm-generic/device.h>
--- /dev/null
+/* MN10300 64-bit division
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DIV64
+#define _ASM_DIV64
+
+#include <linux/types.h>
+
+extern void ____unhandled_size_in_do_div___(void);
+
+/*
+ * divide n by base, leaving the result in n and returning the remainder
+ * - we can do this quite efficiently on the MN10300 by cascading the divides
+ * through the MDR register
+ */
+#define do_div(n, base) \
+({ \
+ unsigned __rem = 0; \
+ if (sizeof(n) <= 4) { \
+ asm("mov %1,mdr \n" \
+ "divu %2,%0 \n" \
+ "mov mdr,%1 \n" \
+ : "+r"(n), "=d"(__rem) \
+ : "r"(base), "1"(__rem) \
+ : "cc" \
+ ); \
+ } else if (sizeof(n) <= 8) { \
+ union { \
+ unsigned long long l; \
+ u32 w[2]; \
+ } __quot; \
+ __quot.l = n; \
+ asm("mov %0,mdr \n" /* MDR = 0 */ \
+ "divu %3,%1 \n" \
+ /* __quot.MSL = __div.MSL / base, */ \
+ /* MDR = MDR:__div.MSL % base */ \
+ "divu %3,%2 \n" \
+ /* __quot.LSL = MDR:__div.LSL / base, */ \
+ /* MDR = MDR:__div.LSL % base */ \
+ "mov mdr,%0 \n" \
+ : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \
+ : "r"(base), "0"(__rem), "1"(__quot.w[1]), \
+ "2"(__quot.w[0]) \
+ : "cc" \
+ ); \
+ n = __quot.l; \
+ } else { \
+ ____unhandled_size_in_do_div___(); \
+ } \
+ __rem; \
+})
+
+/*
+ * do an unsigned 32-bit multiply and divide with intermediate 64-bit product
+ * so as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
+{
+ unsigned result;
+
+ asm("mulu %2,%0 \n" /* MDR:val = val*mult */
+ "divu %3,%0 \n" /* val = MDR:val/div;
+ * MDR = MDR:val%div */
+ : "=r"(result)
+ : "0"(val), "ir"(mult), "r"(div)
+ );
+
+ return result;
+}
+
+/*
+ * do a signed 32-bit multiply and divide with intermediate 64-bit product so
+ * as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+signed __muldiv64s(signed val, signed mult, signed div)
+{
+ signed result;
+
+ asm("mul %2,%0 \n" /* MDR:val = val*mult */
+ "div %3,%0 \n" /* val = MDR:val/div;
+ * MDR = MDR:val%div */
+ : "=r"(result)
+ : "0"(val), "ir"(mult), "r"(div)
+ );
+
+ return result;
+}
+
+extern __attribute__((const))
+uint64_t div64_64(uint64_t dividend, uint64_t divisor);
+
+#endif /* _ASM_DIV64 */
--- /dev/null
+/* DMA mapping routines for the MN10300 arch
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cache.h>
+#include <asm/io.h>
+
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int flag);
+
+extern void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h))
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode. The
+ * 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory until
+ * either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+static inline
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+ mn10300_dcache_flush_inv();
+ return virt_to_bus(ptr);
+}
+
+/*
+ * Unmap a single streaming mode DMA translation. The dma_addr and size must
+ * match what was provided for in a previous pci_map_single call. All other
+ * usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scather-gather version of the above pci_map_single interface.
+ * Here the scatter gather list elements are each tagged with the appropriate
+ * dma address and length. They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of DMA
+ * address/length pairs than there are SG table elements. (for example
+ * via virtual mapping capabilities) The routine returns the number of
+ * addr/length pairs actually used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are the same
+ * here.
+ */
+static inline
+int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+ enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ int i;
+
+ BUG_ON(!valid_dma_direction(direction));
+ WARN_ON(nents == 0 || sglist[0].length == 0);
+
+ for_each_sg(sglist, sg, nents, i) {
+ BUG_ON(!sg_page(sg));
+
+ sg->dma_address = sg_phys(sg);
+ }
+
+ mn10300_dcache_flush_inv();
+ return nents;
+}
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+/*
+ * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
+ * to pci_map_single, but takes a struct page instead of a virtual address
+ */
+static inline
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+ return page_to_bus(page) + offset;
+}
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Make physical memory consistent for a single streaming mode DMA translation
+ * after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the buffer using
+ * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
+ * function before doing so. At the next point you give the PCI dma address
+ * back to the card, the device again owns the buffer.
+ */
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+
+/*
+ * Make physical memory consistent for a set of streaming mode DMA translations
+ * after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list, same rules
+ * and usage.
+ */
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+static inline
+int dma_mapping_error(dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+/*
+ * Return whether the given PCI device DMA address mask can be supported
+ * properly. For example, if your device can only drive the low 24-bits during
+ * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
+ * function.
+ */
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+ /*
+ * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
+ * guarantee allocations that must be within a tighter range than
+ * GFP_DMA
+ */
+ if (mask < 0x00ffffff)
+ return 0;
+ return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+
+ *dev->dma_mask = mask;
+ return 0;
+}
+
+static inline
+int dma_get_cache_alignment(void)
+{
+ return 1 << L1_CACHE_SHIFT;
+}
+
+#define dma_is_consistent(d) (1)
+
+static inline
+void dma_cache_sync(void *vaddr, size_t size,
+ enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+#endif
--- /dev/null
+/* MN10300 ISA DMA handlers and definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/system.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */
+#define MAX_DMA_ADDRESS 0xbfffffff
+
+extern spinlock_t dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+ return 0;
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_DMA_H */
--- /dev/null
+/* MN10300 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMACTL_REGS_H
+#define _ASM_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */
+#define DMxCTR_BG 0x0000001f /* transfer request source */
+#define DMxCTR_BG_SOFT 0x00000000 /* - software source */
+#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */
+#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */
+#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */
+#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */
+#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */
+#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */
+#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */
+#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */
+#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */
+#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */
+#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */
+#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */
+#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */
+#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */
+#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */
+#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */
+#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */
+#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */
+#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */
+#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */
+#define DMxCTR_SAM_INCR 0x00000000 /* - increment */
+#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */
+#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */
+#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */
+#define DMxCTR_DAM_INCR 0x00000000 /* - increment */
+#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */
+#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */
+#define DMxCTR_TM 0x00001800 /* DMA transfer mode */
+#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */
+#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */
+#define DMxCTR_UT 0x00006000 /* DMA transfer unit */
+#define DMxCTR_UT_1 0x00000000 /* - 1 byte */
+#define DMxCTR_UT_2 0x00002000 /* - 2 byte */
+#define DMxCTR_UT_4 0x00004000 /* - 4 byte */
+#define DMxCTR_UT_16 0x00006000 /* - 16 byte */
+#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */
+#define DMxCTR_RQM 0x00060000 /* external request input source mode */
+#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */
+#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */
+#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */
+#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */
+#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */
+#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */
+
+#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */
+
+#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */
+
+#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */
+#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */
+
+#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent
+ * size reg */
+#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */
+
+#define DM0IRQ 16 /* DMA channel 0 complete IRQ */
+#define DM1IRQ 17 /* DMA channel 1 complete IRQ */
+#define DM2IRQ 18 /* DMA channel 2 complete IRQ */
+#define DM3IRQ 19 /* DMA channel 3 complete IRQ */
+
+#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */
+#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */
+#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */
+#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+ u32 ctr;
+ const void *src;
+ void *dst;
+ u32 siz;
+ u32 cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_DMACTL_REGS_H */
--- /dev/null
+/* MN10300 ELF constant and register definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * AM33 relocations
+ */
+#define R_MN10300_NONE 0 /* No reloc. */
+#define R_MN10300_32 1 /* Direct 32 bit. */
+#define R_MN10300_16 2 /* Direct 16 bit. */
+#define R_MN10300_8 3 /* Direct 8 bit. */
+#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */
+#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */
+#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */
+#define R_MN10300_24 9 /* Direct 24 bit. */
+#define R_MN10300_RELATIVE 23 /* Adjust by program base. */
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_NFPREG 32
+typedef float elf_fpreg_t;
+
+typedef struct {
+ elf_fpreg_t fpregs[ELF_NFPREG];
+ u_int32_t fpcr;
+} elf_fpregset_t;
+
+extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture
+ */
+#define elf_check_arch(x) \
+ (((x)->e_machine == EM_CYGNUS_MN10300) || \
+ ((x)->e_machine == EM_MN10300))
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_MN10300
+
+/*
+ * ELF process initialiser
+ */
+#define ELF_PLAT_INIT(_r, load_addr) \
+do { \
+ struct pt_regs *_ur = current->thread.uregs; \
+ _ur->a3 = 0; _ur->a2 = 0; _ur->d3 = 0; _ur->d2 = 0; \
+ _ur->mcvf = 0; _ur->mcrl = 0; _ur->mcrh = 0; _ur->mdrq = 0; \
+ _ur->e1 = 0; _ur->e0 = 0; _ur->e7 = 0; _ur->e6 = 0; \
+ _ur->e5 = 0; _ur->e4 = 0; _ur->e3 = 0; _ur->e2 = 0; \
+ _ur->lar = 0; _ur->lir = 0; _ur->mdr = 0; \
+ _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \
+} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader. We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ * - must clear the VMALLOC area
+ */
+#define ELF_ET_DYN_BASE 0x04000000
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct user_regs, they are different)
+ * - ELF_CORE_COPY_REGS has been guessed, and may be wrong
+ */
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+do { \
+ pr_reg[0] = regs->a3; \
+ pr_reg[1] = regs->a2; \
+ pr_reg[2] = regs->d3; \
+ pr_reg[3] = regs->d2; \
+ pr_reg[4] = regs->mcvf; \
+ pr_reg[5] = regs->mcrl; \
+ pr_reg[6] = regs->mcrh; \
+ pr_reg[7] = regs->mdrq; \
+ pr_reg[8] = regs->e1; \
+ pr_reg[9] = regs->e0; \
+ pr_reg[10] = regs->e7; \
+ pr_reg[11] = regs->e6; \
+ pr_reg[12] = regs->e5; \
+ pr_reg[13] = regs->e4; \
+ pr_reg[14] = regs->e3; \
+ pr_reg[15] = regs->e2; \
+ pr_reg[16] = regs->sp; \
+ pr_reg[17] = regs->lar; \
+ pr_reg[18] = regs->lir; \
+ pr_reg[19] = regs->mdr; \
+ pr_reg[20] = regs->a1; \
+ pr_reg[21] = regs->a0; \
+ pr_reg[22] = regs->d1; \
+ pr_reg[23] = regs->d0; \
+ pr_reg[24] = regs->orig_d0; \
+ pr_reg[25] = regs->epsw; \
+ pr_reg[26] = regs->pc; \
+} while (0);
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports. This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP (0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX)
+#endif
+
+#endif /* _ASM_ELF_H */
--- /dev/null
+#include <asm-generic/emergency-restart.h>
--- /dev/null
+#include <asm-generic/errno.h>
--- /dev/null
+/* MN10300 Microcontroller core exceptions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_EXCEPTIONS_H
+#define _ASM_EXCEPTIONS_H
+
+#include <linux/linkage.h>
+
+/*
+ * define the breakpoint instruction opcode to use
+ * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can
+ * (can use 0xF7)
+ */
+#define GDBSTUB_BKPT 0xFF
+
+#ifndef __ASSEMBLY__
+
+/*
+ * enumeration of exception codes (as extracted from TBR MSW)
+ */
+enum exception_code {
+ EXCEP_RESET = 0x000000, /* reset */
+
+ /* MMU exceptions */
+ EXCEP_ITLBMISS = 0x000100, /* instruction TLB miss */
+ EXCEP_DTLBMISS = 0x000108, /* data TLB miss */
+ EXCEP_IAERROR = 0x000110, /* instruction address */
+ EXCEP_DAERROR = 0x000118, /* data address */
+
+ /* system exceptions */
+ EXCEP_TRAP = 0x000128, /* program interrupt (PI instruction) */
+ EXCEP_ISTEP = 0x000130, /* single step */
+ EXCEP_IBREAK = 0x000150, /* instruction breakpoint */
+ EXCEP_OBREAK = 0x000158, /* operand breakpoint */
+ EXCEP_PRIVINS = 0x000160, /* privileged instruction execution */
+ EXCEP_UNIMPINS = 0x000168, /* unimplemented instruction execution */
+ EXCEP_UNIMPEXINS = 0x000170, /* unimplemented extended instruction execution */
+ EXCEP_MEMERR = 0x000178, /* illegal memory access */
+ EXCEP_MISALIGN = 0x000180, /* misalignment */
+ EXCEP_BUSERROR = 0x000188, /* bus error */
+ EXCEP_ILLINSACC = 0x000190, /* illegal instruction access */
+ EXCEP_ILLDATACC = 0x000198, /* illegal data access */
+ EXCEP_IOINSACC = 0x0001a0, /* I/O space instruction access */
+ EXCEP_PRIVINSACC = 0x0001a8, /* privileged space instruction access */
+ EXCEP_PRIVDATACC = 0x0001b0, /* privileged space data access */
+ EXCEP_DATINSACC = 0x0001b8, /* data space instruction access */
+ EXCEP_DOUBLE_FAULT = 0x000200, /* double fault */
+
+ /* FPU exceptions */
+ EXCEP_FPU_DISABLED = 0x0001c0, /* FPU disabled */
+ EXCEP_FPU_UNIMPINS = 0x0001c8, /* FPU unimplemented operation */
+ EXCEP_FPU_OPERATION = 0x0001d0, /* FPU operation */
+
+ /* interrupts */
+ EXCEP_WDT = 0x000240, /* watchdog timer overflow */
+ EXCEP_NMI = 0x000248, /* non-maskable interrupt */
+ EXCEP_IRQ_LEVEL0 = 0x000280, /* level 0 maskable interrupt */
+ EXCEP_IRQ_LEVEL1 = 0x000288, /* level 1 maskable interrupt */
+ EXCEP_IRQ_LEVEL2 = 0x000290, /* level 2 maskable interrupt */
+ EXCEP_IRQ_LEVEL3 = 0x000298, /* level 3 maskable interrupt */
+ EXCEP_IRQ_LEVEL4 = 0x0002a0, /* level 4 maskable interrupt */
+ EXCEP_IRQ_LEVEL5 = 0x0002a8, /* level 5 maskable interrupt */
+ EXCEP_IRQ_LEVEL6 = 0x0002b0, /* level 6 maskable interrupt */
+
+ /* system calls */
+ EXCEP_SYSCALL0 = 0x000300, /* system call 0 */
+ EXCEP_SYSCALL1 = 0x000308, /* system call 1 */
+ EXCEP_SYSCALL2 = 0x000310, /* system call 2 */
+ EXCEP_SYSCALL3 = 0x000318, /* system call 3 */
+ EXCEP_SYSCALL4 = 0x000320, /* system call 4 */
+ EXCEP_SYSCALL5 = 0x000328, /* system call 5 */
+ EXCEP_SYSCALL6 = 0x000330, /* system call 6 */
+ EXCEP_SYSCALL7 = 0x000338, /* system call 7 */
+ EXCEP_SYSCALL8 = 0x000340, /* system call 8 */
+ EXCEP_SYSCALL9 = 0x000348, /* system call 9 */
+ EXCEP_SYSCALL10 = 0x000350, /* system call 10 */
+ EXCEP_SYSCALL11 = 0x000358, /* system call 11 */
+ EXCEP_SYSCALL12 = 0x000360, /* system call 12 */
+ EXCEP_SYSCALL13 = 0x000368, /* system call 13 */
+ EXCEP_SYSCALL14 = 0x000370, /* system call 14 */
+ EXCEP_SYSCALL15 = 0x000378, /* system call 15 */
+};
+
+extern void __set_intr_stub(enum exception_code code, void *handler);
+extern void set_intr_stub(enum exception_code code, void *handler);
+extern void set_jtag_stub(enum exception_code code, void *handler);
+
+struct pt_regs;
+
+extern asmlinkage void __common_exception(void);
+extern asmlinkage void itlb_miss(void);
+extern asmlinkage void dtlb_miss(void);
+extern asmlinkage void itlb_aerror(void);
+extern asmlinkage void dtlb_aerror(void);
+extern asmlinkage void raw_bus_error(void);
+extern asmlinkage void double_fault(void);
+extern asmlinkage int system_call(struct pt_regs *);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
+extern asmlinkage void uninitialised_exception(struct pt_regs *,
+ enum exception_code);
+extern asmlinkage void irq_handler(void);
+extern asmlinkage void profile_handler(void);
+extern asmlinkage void nmi_handler(void);
+extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
+
+extern void die(const char *, struct pt_regs *, enum exception_code)
+ ATTRIB_NORET;
+
+extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_EXCEPTIONS_H */
--- /dev/null
+/* MN10300 Frame buffer stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FB_H
+#define _ASM_FB_H
+
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_FB_H */
--- /dev/null
+#include <asm-generic/fcntl.h>
--- /dev/null
+/* MN10300 FPU definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+
+#ifdef __KERNEL__
+
+/* the task that owns the FPU state */
+extern struct task_struct *fpu_state_owner;
+
+#define set_using_fpu(tsk) \
+do { \
+ (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \
+} while (0)
+
+#define clear_using_fpu(tsk) \
+do { \
+ (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \
+} while (0)
+
+#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
+
+#define unlazy_fpu(tsk) \
+do { \
+ preempt_disable(); \
+ if (fpu_state_owner == (tsk)) \
+ fpu_save(&tsk->thread.fpu_state); \
+ preempt_enable(); \
+} while (0)
+
+#define exit_fpu() \
+do { \
+ struct task_struct *__tsk = current; \
+ preempt_disable(); \
+ if (fpu_state_owner == __tsk) \
+ fpu_state_owner = NULL; \
+ preempt_enable(); \
+} while (0)
+
+#define flush_fpu() \
+do { \
+ struct task_struct *__tsk = current; \
+ preempt_disable(); \
+ if (fpu_state_owner == __tsk) { \
+ fpu_state_owner = NULL; \
+ __tsk->thread.uregs->epsw &= ~EPSW_FE; \
+ } \
+ preempt_enable(); \
+ clear_using_fpu(__tsk); \
+} while (0)
+
+extern asmlinkage void fpu_init_state(void);
+extern asmlinkage void fpu_kill_state(struct task_struct *);
+extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+
+#ifdef CONFIG_FPU
+extern asmlinkage void fpu_save(struct fpu_state_struct *);
+extern asmlinkage void fpu_restore(struct fpu_state_struct *);
+#else
+#define fpu_save(a)
+#define fpu_restore(a)
+#endif /* CONFIG_FPU */
+
+/*
+ * signal frame handlers
+ */
+extern int fpu_setup_sigcontext(struct fpucontext *buf);
+extern int fpu_restore_sigcontext(struct fpucontext *buf);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_FPU_H */
--- /dev/null
+/* MN10300 Microcontroller core system register definitions -*- asm -*-
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FRAME_INC
+#define _ASM_FRAME_INC
+
+#ifndef __ASSEMBLY__
+#error not for use in C files
+#endif
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#define pi break
+
+#define fp a3
+
+###############################################################################
+#
+# build a stack frame from the registers
+# - the caller has subtracted 4 from SP before coming here
+#
+###############################################################################
+.macro SAVE_ALL
+ add -4,sp # next exception frame ptr save area
+ movm [other],(sp)
+ mov usp,a1
+ mov a1,(sp) # USP in MOVM[other] dummy slot
+ movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
+ mov sp,fp # FRAME pointer in A3
+ add -12,sp # allow for calls to be made
+ mov (__frame),a1
+ mov a1,(REG_NEXT,fp)
+ mov fp,(__frame)
+
+ and ~EPSW_FE,epsw # disable the FPU inside the kernel
+
+ # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ mov (__current),e2
+#endif
+.endm
+
+###############################################################################
+#
+# restore the registers from a stack frame
+#
+###############################################################################
+.macro RESTORE_ALL
+ # peel back the stack to the calling frame
+ # - this permits execve() to discard extra frames due to kernel syscalls
+ mov (__frame),fp
+ mov fp,sp
+ mov (REG_NEXT,fp),d0 # userspace has regs->next == 0
+ mov d0,(__frame)
+
+#ifndef CONFIG_MN10300_USING_JTAG
+ mov (REG_EPSW,fp),d0
+ btst EPSW_T,d0
+ beq 99f
+
+ or EPSW_NMID,epsw
+ movhu (DCR),d1
+ or 0x0001, d1
+ movhu d1,(DCR)
+
+99:
+#endif
+ movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+
+ # must restore usp even if returning to kernel space,
+ # when CONFIG_PREEMPT is enabled.
+ mov (sp),a1 # USP in MOVM[other] dummy slot
+ mov a1,usp
+
+ movm (sp),[other]
+ add 8,sp
+ rti
+
+.endm
+
+
+#endif /* _ASM_FRAME_INC */
--- /dev/null
+#include <asm-generic/futex.h>
--- /dev/null
+/* MN10300 Kernel GDB stub definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_GDB_STUB_H
+#define _ASM_GDB_STUB_H
+
+#include <asm/exceptions.h>
+
+/*
+ * register ID numbers in GDB remote protocol
+ */
+
+#define GDB_REGID_PC 9
+#define GDB_REGID_FP 7
+#define GDB_REGID_SP 8
+
+/*
+ * virtual stack layout for the GDB exception handler
+ */
+#define NUMREGS 64
+
+#define GDB_FR_D0 (0 * 4)
+#define GDB_FR_D1 (1 * 4)
+#define GDB_FR_D2 (2 * 4)
+#define GDB_FR_D3 (3 * 4)
+#define GDB_FR_A0 (4 * 4)
+#define GDB_FR_A1 (5 * 4)
+#define GDB_FR_A2 (6 * 4)
+#define GDB_FR_A3 (7 * 4)
+
+#define GDB_FR_SP (8 * 4)
+#define GDB_FR_PC (9 * 4)
+#define GDB_FR_MDR (10 * 4)
+#define GDB_FR_EPSW (11 * 4)
+#define GDB_FR_LIR (12 * 4)
+#define GDB_FR_LAR (13 * 4)
+#define GDB_FR_MDRQ (14 * 4)
+
+#define GDB_FR_E0 (15 * 4)
+#define GDB_FR_E1 (16 * 4)
+#define GDB_FR_E2 (17 * 4)
+#define GDB_FR_E3 (18 * 4)
+#define GDB_FR_E4 (19 * 4)
+#define GDB_FR_E5 (20 * 4)
+#define GDB_FR_E6 (21 * 4)
+#define GDB_FR_E7 (22 * 4)
+
+#define GDB_FR_SSP (23 * 4)
+#define GDB_FR_MSP (24 * 4)
+#define GDB_FR_USP (25 * 4)
+#define GDB_FR_MCRH (26 * 4)
+#define GDB_FR_MCRL (27 * 4)
+#define GDB_FR_MCVF (28 * 4)
+
+#define GDB_FR_FPCR (29 * 4)
+#define GDB_FR_DUMMY0 (30 * 4)
+#define GDB_FR_DUMMY1 (31 * 4)
+
+#define GDB_FR_FS0 (32 * 4)
+
+#define GDB_FR_SIZE (NUMREGS * 4)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This is the same as above, but for the high-level
+ * part of the GDB stub.
+ */
+
+struct gdb_regs {
+ /* saved main processor registers */
+ u32 d0, d1, d2, d3, a0, a1, a2, a3;
+ u32 sp, pc, mdr, epsw, lir, lar, mdrq;
+ u32 e0, e1, e2, e3, e4, e5, e6, e7;
+ u32 ssp, msp, usp, mcrh, mcrl, mcvf;
+
+ /* saved floating point registers */
+ u32 fpcr, _dummy0, _dummy1;
+ u32 fs0, fs1, fs2, fs3, fs4, fs5, fs6, fs7;
+ u32 fs8, fs9, fs10, fs11, fs12, fs13, fs14, fs15;
+ u32 fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23;
+ u32 fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31;
+};
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern asmlinkage void gdbstub_init(void);
+extern asmlinkage void gdbstub_exit(int status);
+extern asmlinkage void gdbstub_io_init(void);
+extern asmlinkage void gdbstub_io_set_baud(unsigned baud);
+extern asmlinkage int gdbstub_io_rx_char(unsigned char *_ch, int nonblock);
+extern asmlinkage void gdbstub_io_tx_char(unsigned char ch);
+extern asmlinkage void gdbstub_io_tx_flush(void);
+
+extern asmlinkage void gdbstub_io_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code);
+extern asmlinkage int gdbstub_intercept(struct pt_regs *, enum exception_code);
+extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void __gdbstub_bug_trap(void);
+extern asmlinkage void __gdbstub_pause(void);
+extern asmlinkage void start_kernel(void);
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern asmlinkage void gdbstub_purge_cache(void);
+#else
+#define gdbstub_purge_cache() do {} while (0)
+#endif
+
+/* Used to prevent crashes in memory access */
+extern asmlinkage int gdbstub_read_byte(const u8 *, u8 *);
+extern asmlinkage int gdbstub_read_word(const u8 *, u8 *);
+extern asmlinkage int gdbstub_read_dword(const u8 *, u8 *);
+extern asmlinkage int gdbstub_write_byte(u32, u8 *);
+extern asmlinkage int gdbstub_write_word(u32, u8 *);
+extern asmlinkage int gdbstub_write_dword(u32, u8 *);
+
+extern asmlinkage void gdbstub_read_byte_guard(void);
+extern asmlinkage void gdbstub_read_byte_cont(void);
+extern asmlinkage void gdbstub_read_word_guard(void);
+extern asmlinkage void gdbstub_read_word_cont(void);
+extern asmlinkage void gdbstub_read_dword_guard(void);
+extern asmlinkage void gdbstub_read_dword_cont(void);
+extern asmlinkage void gdbstub_write_byte_guard(void);
+extern asmlinkage void gdbstub_write_byte_cont(void);
+extern asmlinkage void gdbstub_write_word_guard(void);
+extern asmlinkage void gdbstub_write_word_cont(void);
+extern asmlinkage void gdbstub_write_dword_guard(void);
+extern asmlinkage void gdbstub_write_dword_cont(void);
+
+extern u8 gdbstub_rx_buffer[PAGE_SIZE];
+extern u32 gdbstub_rx_inp;
+extern u32 gdbstub_rx_outp;
+extern u8 gdbstub_rx_overflow;
+extern u8 gdbstub_busy;
+extern u8 gdbstub_rx_unget;
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+extern void gdbstub_printk(const char *fmt, ...)
+ __attribute__((format(printf, 1, 2)));
+#else
+static inline __attribute__((format(printf, 1, 2)))
+void gdbstub_printk(const char *fmt, ...)
+{
+}
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
+#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_entry(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
+#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_bkpt(FMT, ...) ({ 0; })
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_GDB_STUB_H */
--- /dev/null
+/* MN10300 Hardware IRQ statistics and management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/exceptions.h>
+
+/* assembly code in softirq.h is sensitive to the offsets of these fields */
+typedef struct {
+ unsigned int __softirq_pending;
+ unsigned long idle_timestamp;
+ unsigned int __nmi_count; /* arch dependent */
+ unsigned int __irq_count; /* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(int irq);
+
+/*
+ * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table
+ * - these should jump to __common_exception in entry.S unless there's a good
+ * reason to do otherwise (see trap_preinit() in traps.c)
+ */
+typedef void (*intr_stub_fnx)(struct pt_regs *regs,
+ enum exception_code intcode);
+
+/*
+ * manipulate pointers in the Exception table (see entry.S)
+ * - these are indexed by decoding the lower 24 bits of the TBR register
+ * - note that the MN103E010 doesn't always trap through the correct vector,
+ * but does always set the TBR correctly
+ */
+extern asmlinkage void set_excp_vector(enum exception_code code,
+ intr_stub_fnx handler);
+
+#endif /* _ASM_HARDIRQ_H */
--- /dev/null
+/* MN10300 Virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* undef for production */
+#undef HIGHMEM_DEBUG
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void __init kmap_init(void);
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE 0xfe000000UL
+#define LAST_PKMAP 1024
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern unsigned long __fastcall kmap_high(struct page *page);
+extern void __fastcall kunmap_high(struct page *page);
+
+static inline unsigned long kmap(struct page *page)
+{
+ if (in_interrupt())
+ BUG();
+ if (page < highmem_start_page)
+ return page_address(page);
+ return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+ if (in_interrupt())
+ BUG();
+ if (page < highmem_start_page)
+ return;
+ kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline unsigned long kmap_atomic(struct page *page, enum km_type type)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+
+ if (page < highmem_start_page)
+ return page_address(page);
+
+ idx = type + KM_TYPE_NR * smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#if HIGHMEM_DEBUG
+ if (!pte_none(*(kmap_pte - idx)))
+ BUG();
+#endif
+ set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
+ __flush_tlb_one(vaddr);
+
+ return vaddr;
+}
+
+static inline void kunmap_atomic(unsigned long vaddr, enum km_type type)
+{
+#if HIGHMEM_DEBUG
+ enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id();
+
+ if (vaddr < FIXADDR_START) /* FIXME */
+ return;
+
+ if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
+ BUG();
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(kmap_pte - idx);
+ __flush_tlb_one(vaddr);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
--- /dev/null
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+#endif /* _ASM_HW_IRQ_H */
--- /dev/null
+/* MN10300 Arch-specific IDE code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/ide.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IDE_H
+#define _ASM_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/intctl-regs.h>
+
+#undef SUPPORT_SLOW_DATA_PORTS
+#define SUPPORT_SLOW_DATA_PORTS 0
+
+#undef SUPPORT_VLB_SYNC
+#define SUPPORT_VLB_SYNC 0
+
+#ifndef MAX_HWIFS
+#define MAX_HWIFS 8
+#endif
+
+/*
+ * some bits needed for parts of the IDE subsystem to compile
+ */
+#define __ide_mm_insw(port, addr, n) \
+ insw((unsigned long) (port), (addr), (n))
+#define __ide_mm_insl(port, addr, n) \
+ insl((unsigned long) (port), (addr), (n))
+#define __ide_mm_outsw(port, addr, n) \
+ outsw((unsigned long) (port), (addr), (n))
+#define __ide_mm_outsl(port, addr, n) \
+ outsl((unsigned long) (port), (addr), (n))
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IDE_H */
--- /dev/null
+/* MN10300 On-board interrupt controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_INTCTL_REGS_H
+#define _ASM_INTCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* interrupt controller registers */
+#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */
+
+#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */
+#define IAGR_GN 0x00fc /* group number register
+ * (documentation _has_ to be wrong)
+ */
+
+#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */
+#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
+
+#define SET_XIRQ_TRIGGER(X,Y) \
+do { \
+ u16 x = EXTMD; \
+ x &= ~(3 << ((X) * 2)); \
+ x |= ((Y) & 3) << ((X) * 2); \
+ EXTMD = x; \
+} while (0)
+
+#define XIRQ_TRIGGER_LOWLEVEL 0
+#define XIRQ_TRIGGER_HILEVEL 1
+#define XIRQ_TRIGGER_NEGEDGE 2
+#define XIRQ_TRIGGER_POSEDGE 3
+
+/* non-maskable interrupt control */
+#define NMIIRQ 0
+#define NMICR GxICR(NMIIRQ) /* NMI control register */
+#define NMICR_NMIF 0x0001 /* NMI pin interrupt flag */
+#define NMICR_WDIF 0x0002 /* watchdog timer overflow flag */
+#define NMICR_ABUSERR 0x0008 /* async bus error flag */
+
+/* maskable interrupt control */
+#define GxICR_DETECT 0x0001 /* interrupt detect flag */
+#define GxICR_REQUEST 0x0010 /* interrupt request flag */
+#define GxICR_ENABLE 0x0100 /* interrupt enable flag */
+#define GxICR_LEVEL 0x7000 /* interrupt priority level */
+#define GxICR_LEVEL_0 0x0000 /* - level 0 */
+#define GxICR_LEVEL_1 0x1000 /* - level 1 */
+#define GxICR_LEVEL_2 0x2000 /* - level 2 */
+#define GxICR_LEVEL_3 0x3000 /* - level 3 */
+#define GxICR_LEVEL_4 0x4000 /* - level 4 */
+#define GxICR_LEVEL_5 0x5000 /* - level 5 */
+#define GxICR_LEVEL_6 0x6000 /* - level 6 */
+#define GxICR_LEVEL_SHIFT 12
+
+#ifndef __ASSEMBLY__
+extern void set_intr_level(int irq, u16 level);
+extern void set_intr_postackable(int irq);
+#endif
+
+/* external interrupts */
+#define XIRQxICR(X) GxICR((X)) /* external interrupt control regs */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_INTCTL_REGS_H */
--- /dev/null
+/* MN10300 I/O port emulation and memory-mapped I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cpu-regs.h>
+#include <asm/cacheflush.h>
+
+#define mmiowb() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+static inline u8 readb(const volatile void __iomem *addr)
+{
+ return *(const volatile u8 *) addr;
+}
+
+static inline u16 readw(const volatile void __iomem *addr)
+{
+ return *(const volatile u16 *) addr;
+}
+
+static inline u32 readl(const volatile void __iomem *addr)
+{
+ return *(const volatile u32 *) addr;
+}
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+static inline void writeb(u8 b, volatile void __iomem *addr)
+{
+ *(volatile u8 *) addr = b;
+}
+
+static inline void writew(u16 b, volatile void __iomem *addr)
+{
+ *(volatile u16 *) addr = b;
+}
+
+static inline void writel(u32 b, volatile void __iomem *addr)
+{
+ *(volatile u32 *) addr = b;
+}
+
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+static inline u8 inb_local(unsigned long addr)
+{
+ return readb((volatile void __iomem *) addr);
+}
+
+static inline void outb_local(u8 b, unsigned long addr)
+{
+ return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline u8 inb(unsigned long addr)
+{
+ return readb((volatile void __iomem *) addr);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+ return readw((volatile void __iomem *) addr);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+ return readl((volatile void __iomem *) addr);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+ return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+ return writew(b, (volatile void __iomem *) addr);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+ return writel(b, (volatile void __iomem *) addr);
+}
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x, addr) outb((x), (addr))
+#define outw_p(x, addr) outw((x), (addr))
+#define outl_p(x, addr) outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+ if (count) {
+ u8 *buf = buffer;
+ do {
+ u8 x = inb(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+ if (count) {
+ u16 *buf = buffer;
+ do {
+ u16 x = inw(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+ if (count) {
+ u32 *buf = buffer;
+ do {
+ u32 x = inl(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+ if (count) {
+ const u8 *buf = buffer;
+ do {
+ outb(*buf++, addr);
+ } while (--count);
+ }
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+ if (count) {
+ const u16 *buf = buffer;
+ do {
+ outw(*buf++, addr);
+ } while (--count);
+ }
+}
+
+extern void __outsl(unsigned long addr, const void *buffer, int count);
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+ if ((unsigned long) buffer & 0x3)
+ return __outsl(addr, buffer, count);
+
+ if (count) {
+ const u32 *buf = buffer;
+ do {
+ outl(*buf++, addr);
+ } while (--count);
+ }
+}
+
+#define ioread8(addr) readb(addr)
+#define ioread16(addr) readw(addr)
+#define ioread32(addr) readl(addr)
+
+#define iowrite8(v, addr) writeb((v), (addr))
+#define iowrite16(v, addr) writew((v), (addr))
+#define iowrite32(v, addr) writel((v), (addr))
+
+#define ioread8_rep(p, dst, count) \
+ insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+ insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+ insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+ outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+ outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+ outsl((unsigned long) (p), (src), (count))
+
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void *) (x))
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+ return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+ return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+static inline void *__ioremap(unsigned long offset, unsigned long size,
+ unsigned long flags)
+{
+ return (void *) offset;
+}
+
+static inline void *ioremap(unsigned long offset, unsigned long size)
+{
+ return (void *) offset;
+}
+
+/*
+ * This one maps high address device memory and turns off caching for that
+ * area. it's useful if some control registers are in such an area and write
+ * combining or read caching is not desirable:
+ */
+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+{
+ return (void *) (offset | 0x20000000);
+}
+
+static inline void iounmap(void *addr)
+{
+}
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+#define xlate_dev_kmem_ptr(p) ((void *) (p))
+#define xlate_dev_mem_ptr(p) ((void *) (p))
+
+/*
+ * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff
+ */
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+ return ((unsigned long) address) & ~0x20000000;
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+ return (void *) address;
+}
+
+#define page_to_bus page_to_phys
+
+#define memset_io(a, b, c) memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
--- /dev/null
+#include <asm-generic/ioctl.h>
--- /dev/null
+#ifndef _ASM_IOCTLS_H
+#define _ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T', 0x2A, struct termios2)
+#define TCSETS2 _IOW('T', 0x2B, struct termios2)
+#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
+#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
+ * (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
+#define FIOQSIZE 0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* _ASM_IOCTLS_H */
--- /dev/null
+#include <asm-generic/ipc.h>
--- /dev/null
+#ifndef _ASM_IPCBUF_H_
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
--- /dev/null
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/irq.h:
+ * - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <asm/intctl-regs.h>
+#include <asm/reset-regs.h>
+#include <asm/proc/irq.h>
+
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ INT_MAX
+
+/* hardware irq numbers */
+#define NR_IRQS GxICR_NUM_IRQS
+
+/* external hardware irq numbers */
+#define NR_XIRQS GxICR_NUM_XIRQS
+
+#define irq_canonicalize(IRQ) (IRQ)
+
+#endif /* _ASM_IRQ_H */
--- /dev/null
+/* MN10300 IRQ registers pointer definition
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+
+#endif /* _ASM_IRQ_REGS_H */
--- /dev/null
+/* MN10300 In-kernel death knells
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_KDEBUG_H
+#define _ASM_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+ DIE_OOPS = 1,
+ DIE_BREAKPOINT,
+ DIE_GPF,
+};
+
+#endif /* _ASM_KDEBUG_H */
--- /dev/null
+/* MN10300 kmap_atomic() slot IDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif /* _ASM_KMAP_TYPES_H */
--- /dev/null
+/* MN10300 Kernel Probes support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct kprobe;
+
+typedef unsigned char kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION 0xff
+#define MAX_INSN_SIZE 8
+#define MAX_STACK_SIZE 128
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+ /* copy of original instruction
+ */
+ kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+extern const int kretprobe_blacklist_size;
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data);
+
+#define flush_insn_slot(p) do {} while (0)
+
+extern void arch_remove_kprobe(struct kprobe *p);
+
+#endif /* _ASM_KPROBES_H */
--- /dev/null
+/* MN10300 Linkage and calling-convention overrides
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_LINKAGE_H
+#define _ASM_LINKAGE_H
+
+/* don't override anything */
+#define asmlinkage
+#define FASTCALL(x) x
+#define fastcall
+
+#define __ALIGN .align 4,0xcb
+#define __ALIGN_STR ".align 4,0xcb"
+
+#endif
--- /dev/null
+#include <asm-generic/local.h>
--- /dev/null
+#include <asm/rtc-regs.h>
--- /dev/null
+/* MN10300 Constants for mmap and co.
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * - Derived from asm-x86/mman.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#endif /* _ASM_MMAN_H */
--- /dev/null
+/* MN10300 Memory management context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-frv/mmu.h
+ */
+
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+/*
+ * MMU context
+ */
+typedef struct {
+ unsigned long tlbpid[NR_CPUS]; /* TLB PID for this process on
+ * each CPU */
+} mm_context_t;
+
+#endif /* _ASM_MMU_H */
--- /dev/null
+/* MN10300 MMU context management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m32r/mmu_context.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * This implements an algorithm to provide TLB PID mappings to provide
+ * selective access to the TLB for processes, thus reducing the number of TLB
+ * flushes required.
+ *
+ * Note, however, that the M32R algorithm is technically broken as it does not
+ * handle version wrap-around, and could, theoretically, have a problem with a
+ * very long lived program that sleeps long enough for the version number to
+ * wrap all the way around so that its TLB mappings appear valid once again.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm-generic/mm_hooks.h>
+
+#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL
+#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL
+#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL
+#define MMU_NO_CONTEXT 0x00000000UL
+
+extern unsigned long mmu_context_cache[NR_CPUS];
+#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()])
+
+#define enter_lazy_tlb(mm, tsk) do {} while (0)
+
+#ifdef CONFIG_SMP
+#define cpu_ran_vm(cpu, task) \
+ cpu_set((cpu), (task)->cpu_vm_mask)
+#define cpu_maybe_ran_vm(cpu, task) \
+ cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#else
+#define cpu_ran_vm(cpu, task) do {} while (0)
+#define cpu_maybe_ran_vm(cpu, task) true
+#endif /* CONFIG_SMP */
+
+/*
+ * allocate an MMU context
+ */
+static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
+{
+ unsigned long *pmc = &mmu_context_cache[smp_processor_id()];
+ unsigned long mc = ++(*pmc);
+
+ if (!(mc & MMU_CONTEXT_TLBPID_MASK)) {
+ /* we exhausted the TLB PIDs of this version on this CPU, so we
+ * flush this CPU's TLB in its entirety and start new cycle */
+ flush_tlb_all();
+
+ /* fix the TLB version if needed (we avoid version #0 so as to
+ * distingush MMU_NO_CONTEXT) */
+ if (!mc)
+ *pmc = mc = MMU_CONTEXT_FIRST_VERSION;
+ }
+ mm_context(mm) = mc;
+ return mc;
+}
+
+/*
+ * get an MMU context if one is needed
+ */
+static inline unsigned long get_mmu_context(struct mm_struct *mm)
+{
+ unsigned long mc = MMU_NO_CONTEXT, cache;
+
+ if (mm) {
+ cache = mmu_context_cache[smp_processor_id()];
+ mc = mm_context(mm);
+
+ /* if we have an old version of the context, replace it */
+ if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK)
+ mc = allocate_mmu_context(mm);
+ }
+ return mc;
+}
+
+/*
+ * initialise the context related info for a new mm_struct instance
+ */
+static inline int init_new_context(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+ int num_cpus = NR_CPUS, i;
+
+ for (i = 0; i < num_cpus; i++)
+ mm->context.tlbpid[i] = MMU_NO_CONTEXT;
+ return 0;
+}
+
+/*
+ * destroy context related info for an mm_struct that is about to be put to
+ * rest
+ */
+#define destroy_context(mm) do { } while (0)
+
+/*
+ * after we have set current->mm to a new value, this activates the context for
+ * the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, int cpu)
+{
+ PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK;
+}
+
+/*
+ * change between virtual memory sets
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ int cpu = smp_processor_id();
+
+ if (prev != next) {
+ cpu_ran_vm(cpu, next);
+ activate_context(next, cpu);
+ PTBR = (unsigned long) next->pgd;
+ } else if (!cpu_maybe_ran_vm(cpu, next)) {
+ activate_context(next, cpu);
+ }
+}
+
+#define deactivate_mm(tsk, mm) do {} while (0)
+#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
+
+#endif /* _ASM_MMU_CONTEXT_H */
--- /dev/null
+/* MN10300 Arch-specific module definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * Derived from include/asm-i386/module.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+/*
+ * Include the MN10300 architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif /* _ASM_MODULE_H */
--- /dev/null
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
--- /dev/null
+/* MN10300 Mutex fastpath
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+#include <asm-generic/mutex-null.h>
--- /dev/null
+/* Emulation stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_NAMEI_H
+#define _ASM_NAMEI_H
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* _ASM_NAMEI_H */
--- /dev/null
+/* MN10300 NMI handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_NMI_H
+#define _ASM_NMI_H
+
+#endif /* _ASM_NMI_H */
--- /dev/null
+/* MN10300 Page table definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE - 1))
+#else
+#define PAGE_SIZE +(1 << PAGE_SHIFT) /* unary plus marks an
+ * immediate val not an addr */
+#define PAGE_MASK +(~(PAGE_SIZE - 1))
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to, from) memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(addr, vaddr, page) clear_page(addr)
+#define copy_user_page(vto, vfrom, vaddr, to) copy_page(vto, vfrom)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define PTE_MASK PAGE_MASK
+#define HPAGE_SHIFT 22
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK (~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+#endif
+
+#define pte_val(x) ((x).pte)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) })
+#define __pgd(x) ((pgd_t) { (x) })
+#define __pgprot(x) ((pgprot_t) { (x) })
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#endif /* !__ASSEMBLY__ */
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ */
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size) __attribute__((const));
+static inline int get_order(unsigned long size)
+{
+ int order;
+
+ size = (size - 1) >> (PAGE_SHIFT - 1);
+ order = -1;
+ do {
+ size >>= 1;
+ order++;
+ } while (size);
+ return order;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define __PAGE_OFFSET (PAGE_OFFSET_RAW)
+#define PAGE_OFFSET ((unsigned long) __PAGE_OFFSET)
+
+/*
+ * main RAM and kernel working space are coincident at 0x90000000, but to make
+ * life more interesting, there's also an uncached virtual shadow at 0xb0000000
+ * - these mappings are fixed in the MMU
+ */
+#define __pfn_disp (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT)
+
+#define __pa(x) ((unsigned long)(x))
+#define __va(x) ((void *)(unsigned long)(x))
+#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+#define pfn_to_page(pfn) (mem_map + ((pfn) - __pfn_disp))
+#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + __pfn_disp)
+
+#define pfn_valid(pfn) \
+({ \
+ unsigned long __pfn = (pfn) - __pfn_disp; \
+ __pfn < max_mapnr; \
+})
+
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | \
+ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PAGE_H */
--- /dev/null
+/* MN10300 Kernel base address
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+#ifndef _ASM_PAGE_OFFSET_H
+#define _ASM_PAGE_OFFSET_H
+
+#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS
+
+#endif
--- /dev/null
+/* MN10300 Kernel parameters
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ 1000 /* Internal kernel timer frequency */
+#define USER_HZ 100 /* .. some user interfaces are in
+ * "ticks" */
+#define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+#define COMMAND_LINE_SIZE 256
+
+#endif /* _ASM_PARAM_H */
--- /dev/null
+/* MN10300 PCI definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/mm.h> /* for struct page */
+
+#if 0
+#define __pcbdebug(FMT, ADDR, ...) \
+ printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \
+ (u32)(ADDR), ##__VA_ARGS__)
+
+#define __pcidebug(FMT, BUS, DEVFN, WHERE,...) \
+do { \
+ printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n", \
+ (BUS)->number, \
+ PCI_SLOT(DEVFN), \
+ PCI_FUNC(DEVFN), \
+ (u32)(WHERE), ##__VA_ARGS__); \
+} while (0)
+
+#else
+#define __pcbdebug(FMT, ADDR, ...) do {} while (0)
+#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0)
+#endif
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes or
+ * architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+#define pcibios_assign_all_busses() 1
+extern void unit_pci_init(void);
+#else
+#define pcibios_assign_all_busses() 0
+#endif
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO 0xBE000004
+#define PCIBIOS_MIN_MEM 0xB8000000
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space. The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask) (0)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+/* Return the index of the PCI controller for device. */
+static inline int pci_controller_num(struct pci_dev *dev)
+{
+ return 0;
+}
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state,
+ int write_combine);
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/**
+ * pcibios_resource_to_bus - convert resource to PCI bus address
+ * @dev: device which owns this resource
+ * @region: converted bus-centric region (start,end)
+ * @res: resource to convert
+ *
+ * Convert a resource to a PCI device bus address or bus window.
+ */
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+ struct pci_bus_region *region,
+ struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+ struct resource *res,
+ struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
+
+#define pcibios_scan_all_fns(a, b) 0
+
+#endif /* _ASM_PCI_H */
--- /dev/null
+#include <asm-generic/percpu.h>
--- /dev/null
+/* MN10300 Page and page table/directory allocation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/mm.h> /* for struct page */
+
+struct mm_struct;
+struct page;
+
+/* attach a page table to a PMD entry */
+#define pmd_populate_kernel(mm, pmd, pte) \
+ set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE))
+
+static inline
+void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+{
+ set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *, pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+ __free_page(pte);
+}
+
+
+#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+
+#endif /* _ASM_PGALLOC_H */
--- /dev/null
+/* MN10300 Page table manipulators and constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree for the purposes of the MN10300 TLB handler
+ * functions.
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm/cpu-regs.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <linux/threads.h>
+
+#include <asm/bitops.h>
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+extern unsigned long empty_zero_page[1024];
+extern spinlock_t pgd_lock;
+extern struct page *pgd_list;
+
+extern void pmd_ctor(void *, struct kmem_cache *, unsigned long);
+extern void pgtable_cache_init(void);
+extern void paging_init(void);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The Linux mn10300 paging architecture only implements both the traditional
+ * 2-level page tables
+ */
+#define PGDIR_SHIFT 22
+#define PTRS_PER_PGD 1024
+#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */
+#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */
+#define PTRS_PER_PTE 1024
+
+#define PGD_SIZE PAGE_SIZE
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE - 1))
+
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS 0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT 22
+#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS (1024 - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+#endif
+
+/*
+ * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM
+ * area has to be in the lower half of the virtual address range (the upper
+ * half is not translated through the TLB).
+ *
+ * So in this case, the vmalloc area goes at the bottom of the address map
+ * (leaving a hole at the very bottom to catch addressing errors), and
+ * userspace starts immediately above.
+ *
+ * The vmalloc() routines also leaves a hole of 4kB between each vmalloced
+ * area to catch addressing errors.
+ */
+#define VMALLOC_OFFSET (8 * 1024 * 1024)
+#define VMALLOC_START (0x70000000)
+#define VMALLOC_END (0x7C000000)
+
+#ifndef __ASSEMBLY__
+extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
+#endif
+
+/* IPTEL/DPTEL bit assignments */
+#define _PAGE_BIT_VALID xPTEL_V_BIT
+#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_CACHE xPTEL_C_BIT
+#define _PAGE_BIT_PRESENT xPTEL_PV_BIT
+#define _PAGE_BIT_DIRTY xPTEL_D_BIT
+#define _PAGE_BIT_GLOBAL xPTEL_G_BIT
+
+#define _PAGE_VALID xPTEL_V
+#define _PAGE_ACCESSED xPTEL_UNUSED1
+#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */
+#define _PAGE_CACHE xPTEL_C
+#define _PAGE_PRESENT xPTEL_PV
+#define _PAGE_DIRTY xPTEL_D
+#define _PAGE_PROT xPTEL_PR
+#define _PAGE_PROT_RKNU xPTEL_PR_ROK
+#define _PAGE_PROT_WKNU xPTEL_PR_RWK
+#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU
+#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU
+#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU
+#define _PAGE_GLOBAL xPTEL_G
+#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */
+
+#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */
+
+#define __PAGE_PROT_UWAUX 0x040
+#define __PAGE_PROT_USER 0x080
+#define __PAGE_PROT_WRITE 0x100
+
+#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID)
+#define _PAGE_PROTNONE 0x000 /* If not present */
+
+#ifndef __ASSEMBLY__
+
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#define _PAGE_TABLE (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PAGE_NONE (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_SHARED (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_COPY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+
+#define PAGE_NONE __pgprot(__PAGE_NONE | _PAGE_NX)
+#define PAGE_SHARED_NOEXEC __pgprot(__PAGE_SHARED | _PAGE_NX)
+#define PAGE_COPY_NOEXEC __pgprot(__PAGE_COPY | _PAGE_NX)
+#define PAGE_READONLY_NOEXEC __pgprot(__PAGE_READONLY | _PAGE_NX)
+#define PAGE_SHARED_EXEC __pgprot(__PAGE_SHARED)
+#define PAGE_COPY_EXEC __pgprot(__PAGE_COPY)
+#define PAGE_READONLY_EXEC __pgprot(__PAGE_READONLY)
+#define PAGE_COPY PAGE_COPY_NOEXEC
+#define PAGE_READONLY PAGE_READONLY_NOEXEC
+#define PAGE_SHARED PAGE_SHARED_EXEC
+
+#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+
+#define __PAGE_KERNEL (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX)
+#define __PAGE_KERNEL_EXEC (__PAGE_KERNEL & ~_PAGE_NX)
+#define __PAGE_KERNEL_RO (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define PAGE_KERNEL __pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
+
+/*
+ * Whilst the MN10300 can do page protection for execute (given separate data
+ * and insn TLBs), we are not supporting it at the moment. Write permission,
+ * however, always implies read permission (but not execute permission).
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY_NOEXEC
+#define __P010 PAGE_COPY_NOEXEC
+#define __P011 PAGE_COPY_NOEXEC
+#define __P100 PAGE_READONLY_EXEC
+#define __P101 PAGE_READONLY_EXEC
+#define __P110 PAGE_COPY_EXEC
+#define __P111 PAGE_COPY_EXEC
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY_NOEXEC
+#define __S010 PAGE_SHARED_NOEXEC
+#define __S011 PAGE_SHARED_NOEXEC
+#define __S100 PAGE_READONLY_EXEC
+#define __S101 PAGE_READONLY_EXEC
+#define __S110 PAGE_SHARED_EXEC
+#define __S111 PAGE_SHARED_EXEC
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+
+#define pte_present(x) (pte_val(x) & _PAGE_VALID)
+#define pte_clear(mm, addr, xp) \
+do { \
+ set_pte_at((mm), (addr), (xp), __pte(0)); \
+} while (0)
+
+#define pmd_none(x) (!pmd_val(x))
+#define pmd_present(x) (!pmd_none(x))
+#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x) 0
+
+
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_read(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; }
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte;
+}
+static inline pte_t pte_exprotect(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_NX; return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) &= ~_PAGE_NX; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+ pte_val(pte) |= __PAGE_PROT_USER;
+ if (pte_write(pte))
+ pte_val(pte) |= __PAGE_PROT_UWAUX;
+ return pte;
+}
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ pte_val(pte) |= __PAGE_PROT_WRITE;
+ if (pte_val(pte) & __PAGE_PROT_USER)
+ pte_val(pte) |= __PAGE_PROT_UWAUX;
+ return pte;
+}
+
+#define pte_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+ __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+ __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_clear(xp) do { } while (0)
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte((ptep), (pteval))
+#define set_pte_atomic(pteptr, pteval) set_pte((pteptr), (pteval))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define ptep_get_and_clear(mm, addr, ptep) \
+ __pte(xchg(&(ptep)->pte, 0))
+#define pte_same(a, b) (pte_val(a) == pte_val(b))
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+#define pte_none(x) (!pte_val(x))
+#define pte_pfn(x) ((unsigned long) (pte_val(x) >> PAGE_SHIFT))
+#define __pfn_addr(pfn) ((pfn) << PAGE_SHIFT)
+#define pfn_pte(pfn, prot) __pte(__pfn_addr(pfn) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) __pmd(__pfn_addr(pfn) | pgprot_val(prot))
+
+/*
+ * All present user pages are user-executable:
+ */
+static inline int pte_exec(pte_t pte)
+{
+ return pte_user(pte);
+}
+
+/*
+ * All present pages are kernel-executable:
+ */
+static inline int pte_exec_kernel(pte_t pte)
+{
+ return 1;
+}
+
+/*
+ * Bits 0 and 1 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS 29
+
+#define pte_to_pgoff(pte) (pte_val(pte) >> 2)
+#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x) (((x).val >> 2) & 0x3f)
+#define __swp_offset(x) ((x).val >> 8)
+#define __swp_entry(type, offset) \
+ ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) __pte((x).val)
+
+static inline
+int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
+{
+ if (!pte_dirty(*ptep))
+ return 0;
+ return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+static inline
+int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
+{
+ if (!pte_young(*ptep))
+ return 0;
+ return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte);
+}
+
+static inline
+void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX);
+}
+
+static inline void ptep_mkdirty(pte_t *ptep)
+{
+ set_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable". On processors which
+ * do not support it, this is a no-op.
+ */
+#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE)
+
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) \
+ ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) &= _PAGE_CHG_MASK;
+ pte_val(pte) |= pgprot_val(newprot);
+ return pte;
+}
+
+#define page_pte(page) page_pte_prot((page), __pgprot(0))
+
+#define pmd_page_kernel(pmd) \
+ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+
+#define pmd_large(pmd) \
+ ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \
+ (_PAGE_PSE | _PAGE_PRESENT))
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address) \
+ (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address))
+
+/*
+ * Make a given kernel text page executable/non-executable.
+ * Returns the previous executability setting of that page (which
+ * is used to restore the previous state). Used by the SMP bootup code.
+ * NOTE: this is an __init function for security reasons.
+ */
+static inline int set_kernel_exec(unsigned long vaddr, int enable)
+{
+ return 0;
+}
+
+#define pte_offset_map(dir, address) \
+ ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do {} while (0)
+#define pte_unmap_nested(pte) do {} while (0)
+
+/*
+ * The MN10300 has external MMU info in the form of a TLB: this is adapted from
+ * the kernel page tables containing the necessary information by tlb-mn10300.S
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t pte);
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr) (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range((vma), (vaddr), (pfn), (size), (prot))
+
+#define MK_IOSPACE_PFN(space, pfn) (pfn)
+#define GET_IOSPACE(pfn) 0
+#define GET_PFN(pfn) (pfn)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTEP_MKDIRTY
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
--- /dev/null
+/* MN10300 On-board I/O port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PIO_REGS_H
+#define _ASM_PIO_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* I/O port 0 */
+#define P0MD __SYSREG(0xdb000000, u16) /* mode reg */
+#define P0MD_0 0x0003 /* mask */
+#define P0MD_0_IN 0x0000 /* input mode */
+#define P0MD_0_OUT 0x0001 /* output mode */
+#define P0MD_0_TM0IO 0x0002 /* timer 0 I/O mode */
+#define P0MD_0_EYECLK 0x0003 /* test signal output (clock) */
+#define P0MD_1 0x000c
+#define P0MD_1_IN 0x0000
+#define P0MD_1_OUT 0x0004
+#define P0MD_1_TM1IO 0x0008 /* timer 1 I/O mode */
+#define P0MD_1_EYED 0x000c /* test signal output (data) */
+#define P0MD_2 0x0030
+#define P0MD_2_IN 0x0000
+#define P0MD_2_OUT 0x0010
+#define P0MD_2_TM2IO 0x0020 /* timer 2 I/O mode */
+#define P0MD_3 0x00c0
+#define P0MD_3_IN 0x0000
+#define P0MD_3_OUT 0x0040
+#define P0MD_3_TM3IO 0x0080 /* timer 3 I/O mode */
+#define P0MD_4 0x0300
+#define P0MD_4_IN 0x0000
+#define P0MD_4_OUT 0x0100
+#define P0MD_4_TM4IO 0x0200 /* timer 4 I/O mode */
+#define P0MD_4_XCTS 0x0300 /* XCTS input for serial port 2 */
+#define P0MD_5 0x0c00
+#define P0MD_5_IN 0x0000
+#define P0MD_5_OUT 0x0400
+#define P0MD_5_TM5IO 0x0800 /* timer 5 I/O mode */
+#define P0MD_6 0x3000
+#define P0MD_6_IN 0x0000
+#define P0MD_6_OUT 0x1000
+#define P0MD_6_TM6IOA 0x2000 /* timer 6 I/O mode A */
+#define P0MD_7 0xc000
+#define P0MD_7_IN 0x0000
+#define P0MD_7_OUT 0x4000
+#define P0MD_7_TM6IOB 0x8000 /* timer 6 I/O mode B */
+
+#define P0IN __SYSREG(0xdb000004, u8) /* in reg */
+#define P0OUT __SYSREG(0xdb000008, u8) /* out reg */
+
+#define P0TMIO __SYSREG(0xdb00000c, u8) /* TM pin I/O control reg */
+#define P0TMIO_TM0_IN 0x00
+#define P0TMIO_TM0_OUT 0x01
+#define P0TMIO_TM1_IN 0x00
+#define P0TMIO_TM1_OUT 0x02
+#define P0TMIO_TM2_IN 0x00
+#define P0TMIO_TM2_OUT 0x04
+#define P0TMIO_TM3_IN 0x00
+#define P0TMIO_TM3_OUT 0x08
+#define P0TMIO_TM4_IN 0x00
+#define P0TMIO_TM4_OUT 0x10
+#define P0TMIO_TM5_IN 0x00
+#define P0TMIO_TM5_OUT 0x20
+#define P0TMIO_TM6A_IN 0x00
+#define P0TMIO_TM6A_OUT 0x40
+#define P0TMIO_TM6B_IN 0x00
+#define P0TMIO_TM6B_OUT 0x80
+
+/* I/O port 1 */
+#define P1MD __SYSREG(0xdb000100, u16) /* mode reg */
+#define P1MD_0 0x0003 /* mask */
+#define P1MD_0_IN 0x0000 /* input mode */
+#define P1MD_0_OUT 0x0001 /* output mode */
+#define P1MD_0_TM7IO 0x0002 /* timer 7 I/O mode */
+#define P1MD_0_ADTRG 0x0003 /* A/D converter trigger mode */
+#define P1MD_1 0x000c
+#define P1MD_1_IN 0x0000
+#define P1MD_1_OUT 0x0004
+#define P1MD_1_TM8IO 0x0008 /* timer 8 I/O mode */
+#define P1MD_1_XDMR0 0x000c /* DMA request input 0 mode */
+#define P1MD_2 0x0030
+#define P1MD_2_IN 0x0000
+#define P1MD_2_OUT 0x0010
+#define P1MD_2_TM9IO 0x0020 /* timer 9 I/O mode */
+#define P1MD_2_XDMR1 0x0030 /* DMA request input 1 mode */
+#define P1MD_3 0x00c0
+#define P1MD_3_IN 0x0000
+#define P1MD_3_OUT 0x0040
+#define P1MD_3_TM10IO 0x0080 /* timer 10 I/O mode */
+#define P1MD_3_FRQS0 0x00c0 /* CPU clock multiplier setting input 0 mode */
+#define P1MD_4 0x0300
+#define P1MD_4_IN 0x0000
+#define P1MD_4_OUT 0x0100
+#define P1MD_4_TM11IO 0x0200 /* timer 11 I/O mode */
+#define P1MD_4_FRQS1 0x0300 /* CPU clock multiplier setting input 1 mode */
+
+#define P1IN __SYSREG(0xdb000104, u8) /* in reg */
+#define P1OUT __SYSREG(0xdb000108, u8) /* out reg */
+#define P1TMIO __SYSREG(0xdb00010c, u8) /* TM pin I/O control reg */
+#define P1TMIO_TM11_IN 0x00
+#define P1TMIO_TM11_OUT 0x01
+#define P1TMIO_TM10_IN 0x00
+#define P1TMIO_TM10_OUT 0x02
+#define P1TMIO_TM9_IN 0x00
+#define P1TMIO_TM9_OUT 0x04
+#define P1TMIO_TM8_IN 0x00
+#define P1TMIO_TM8_OUT 0x08
+#define P1TMIO_TM7_IN 0x00
+#define P1TMIO_TM7_OUT 0x10
+
+/* I/O port 2 */
+#define P2MD __SYSREG(0xdb000200, u16) /* mode reg */
+#define P2MD_0 0x0003 /* mask */
+#define P2MD_0_IN 0x0000 /* input mode */
+#define P2MD_0_OUT 0x0001 /* output mode */
+#define P2MD_0_BOOTBW 0x0003 /* boot bus width selector mode */
+#define P2MD_1 0x000c
+#define P2MD_1_IN 0x0000
+#define P2MD_1_OUT 0x0004
+#define P2MD_1_BOOTSEL 0x000c /* boot device selector mode */
+#define P2MD_2 0x0030
+#define P2MD_2_IN 0x0000
+#define P2MD_2_OUT 0x0010
+#define P2MD_3 0x00c0
+#define P2MD_3_IN 0x0000
+#define P2MD_3_OUT 0x0040
+#define P2MD_3_CKIO 0x00c0 /* mode */
+#define P2MD_4 0x0300
+#define P2MD_4_IN 0x0000
+#define P2MD_4_OUT 0x0100
+#define P2MD_4_CMOD 0x0300 /* mode */
+
+#define P2IN __SYSREG(0xdb000204, u8) /* in reg */
+#define P2OUT __SYSREG(0xdb000208, u8) /* out reg */
+#define P2TMIO __SYSREG(0xdb00020c, u8) /* TM pin I/O control reg */
+
+/* I/O port 3 */
+#define P3MD __SYSREG(0xdb000300, u16) /* mode reg */
+#define P3MD_0 0x0003 /* mask */
+#define P3MD_0_IN 0x0000 /* input mode */
+#define P3MD_0_OUT 0x0001 /* output mode */
+#define P3MD_0_AFRXD 0x0002 /* AFR interface mode */
+#define P3MD_1 0x000c
+#define P3MD_1_IN 0x0000
+#define P3MD_1_OUT 0x0004
+#define P3MD_1_AFTXD 0x0008 /* AFR interface mode */
+#define P3MD_2 0x0030
+#define P3MD_2_IN 0x0000
+#define P3MD_2_OUT 0x0010
+#define P3MD_2_AFSCLK 0x0020 /* AFR interface mode */
+#define P3MD_3 0x00c0
+#define P3MD_3_IN 0x0000
+#define P3MD_3_OUT 0x0040
+#define P3MD_3_AFFS 0x0080 /* AFR interface mode */
+#define P3MD_4 0x0300
+#define P3MD_4_IN 0x0000
+#define P3MD_4_OUT 0x0100
+#define P3MD_4_AFEHC 0x0200 /* AFR interface mode */
+
+#define P3IN __SYSREG(0xdb000304, u8) /* in reg */
+#define P3OUT __SYSREG(0xdb000308, u8) /* out reg */
+
+/* I/O port 4 */
+#define P4MD __SYSREG(0xdb000400, u16) /* mode reg */
+#define P4MD_0 0x0003 /* mask */
+#define P4MD_0_IN 0x0000 /* input mode */
+#define P4MD_0_OUT 0x0001 /* output mode */
+#define P4MD_0_SCL0 0x0002 /* I2C/serial mode */
+#define P4MD_1 0x000c
+#define P4MD_1_IN 0x0000
+#define P4MD_1_OUT 0x0004
+#define P4MD_1_SDA0 0x0008
+#define P4MD_2 0x0030
+#define P4MD_2_IN 0x0000
+#define P4MD_2_OUT 0x0010
+#define P4MD_2_SCL1 0x0020
+#define P4MD_3 0x00c0
+#define P4MD_3_IN 0x0000
+#define P4MD_3_OUT 0x0040
+#define P4MD_3_SDA1 0x0080
+#define P4MD_4 0x0300
+#define P4MD_4_IN 0x0000
+#define P4MD_4_OUT 0x0100
+#define P4MD_4_SBO0 0x0200
+#define P4MD_5 0x0c00
+#define P4MD_5_IN 0x0000
+#define P4MD_5_OUT 0x0400
+#define P4MD_5_SBO1 0x0800
+#define P4MD_6 0x3000
+#define P4MD_6_IN 0x0000
+#define P4MD_6_OUT 0x1000
+#define P4MD_6_SBT0 0x2000
+#define P4MD_7 0xc000
+#define P4MD_7_IN 0x0000
+#define P4MD_7_OUT 0x4000
+#define P4MD_7_SBT1 0x8000
+
+#define P4IN __SYSREG(0xdb000404, u8) /* in reg */
+#define P4OUT __SYSREG(0xdb000408, u8) /* out reg */
+
+/* I/O port 5 */
+#define P5MD __SYSREG(0xdb000500, u16) /* mode reg */
+#define P5MD_0 0x0003 /* mask */
+#define P5MD_0_IN 0x0000 /* input mode */
+#define P5MD_0_OUT 0x0001 /* output mode */
+#define P5MD_0_IRTXD 0x0002 /* IrDA mode */
+#define P5MD_0_SOUT 0x0004 /* serial mode */
+#define P5MD_1 0x000c
+#define P5MD_1_IN 0x0000
+#define P5MD_1_OUT 0x0004
+#define P5MD_1_IRRXDS 0x0008 /* IrDA mode */
+#define P5MD_1_SIN 0x000c /* serial mode */
+#define P5MD_2 0x0030
+#define P5MD_2_IN 0x0000
+#define P5MD_2_OUT 0x0010
+#define P5MD_2_IRRXDF 0x0020 /* IrDA mode */
+
+#define P5IN __SYSREG(0xdb000504, u8) /* in reg */
+#define P5OUT __SYSREG(0xdb000508, u8) /* out reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PIO_REGS_H */
--- /dev/null
+#include <asm-generic/poll.h>
--- /dev/null
+/* MN10300 POSIX types
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *__p)
+{
+ unsigned long *__tmp = __p->fds_bits;
+ int __i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 16:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ __tmp[ 8] = 0; __tmp[ 9] = 0;
+ __tmp[10] = 0; __tmp[11] = 0;
+ __tmp[12] = 0; __tmp[13] = 0;
+ __tmp[14] = 0; __tmp[15] = 0;
+ return;
+
+ case 8:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ return;
+
+ case 4:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ return;
+ }
+ }
+ __i = __FDSET_LONGS;
+ while (__i) {
+ __i--;
+ *__tmp = 0;
+ __tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* _ASM_POSIX_TYPES_H */
--- /dev/null
+/* MN103E010 Cache specification
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CACHE_H
+#define _ASM_PROC_CACHE_H
+
+/* L1 cache */
+
+#define L1_CACHE_NWAYS 4 /* number of ways in caches */
+#define L1_CACHE_NENTRIES 256 /* number of entries in each way */
+#define L1_CACHE_BYTES 16 /* bytes per entry */
+#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */
+#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */
+
+#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */
+#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */
+#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */
+#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */
+
+/*
+ * specification of the interval between interrupt checking intervals whilst
+ * managing the cache with the interrupts disabled
+ */
+#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4
+
+#endif /* _ASM_PROC_CACHE_H */
--- /dev/null
+/* MN103E010-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CLOCK_H
+#define _ASM_PROC_CLOCK_H
+
+#include <asm/unit/clock.h>
+
+#define MN10300_WDCLK MN10300_IOCLK
+
+#endif /* _ASM_PROC_CLOCK_H */
--- /dev/null
+/* MN103E010 On-board interrupt controller numbers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_IRQ_H
+#define _ASM_PROC_IRQ_H
+
+#ifdef __KERNEL__
+
+#define GxICR_NUM_IRQS 42
+
+#define GxICR_NUM_XIRQS 8
+
+#define XIRQ0 34
+#define XIRQ1 35
+#define XIRQ2 36
+#define XIRQ3 37
+#define XIRQ4 38
+#define XIRQ5 39
+#define XIRQ6 40
+#define XIRQ7 41
+
+#define XIRQ2IRQ(num) (XIRQ0 + num)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_IRQ_H */
--- /dev/null
+/* MN103E010 Processor description
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_PROC_H
+#define _ASM_PROC_PROC_H
+
+#define PROCESSOR_VENDOR_NAME "Matsushita"
+#define PROCESSOR_MODEL_NAME "mn103e010"
+
+#endif /* _ASM_PROC_PROC_H */
--- /dev/null
+/* MN10300 Processor specifics
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/cpu-regs.h>
+#include <linux/threads.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() \
+({ \
+ void *__pc; \
+ asm("mov pc,%0" : "=a"(__pc)); \
+ __pc; \
+})
+
+extern void show_registers(struct pt_regs *regs);
+
+/*
+ * CPU type and hardware bug flags. Kept separately for each CPU.
+ * Members of this structure are referenced in head.S, so think twice
+ * before touching them. [mj]
+ */
+
+struct mn10300_cpuinfo {
+ int type;
+ unsigned long loops_per_sec;
+ char hard_math;
+ unsigned long *pgd_quick;
+ unsigned long *pte_quick;
+ unsigned long pgtable_cache_sz;
+};
+
+extern struct mn10300_cpuinfo boot_cpu_data;
+
+#define cpu_data &boot_cpu_data
+#define current_cpu_data boot_cpu_data
+
+extern void identify_cpu(struct mn10300_cpuinfo *);
+extern void print_cpu_info(struct mn10300_cpuinfo *);
+extern void dodgy_tsc(void);
+#define cpu_relax() do {} while (0)
+
+/*
+ * User space process size: 1.75GB (default).
+ */
+#define TASK_SIZE 0x70000000
+
+/*
+ * Where to put the userspace stack by default
+ */
+#define STACK_TOP 0x70000000
+#define STACK_TOP_MAX STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE 0x30000000
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+struct fpu_state_struct {
+ unsigned long fs[32]; /* fpu registers */
+ unsigned long fpcr; /* fpu control register */
+};
+
+struct thread_struct {
+ struct pt_regs *uregs; /* userspace register frame */
+ unsigned long pc; /* kernel PC */
+ unsigned long sp; /* kernel SP */
+ unsigned long a3; /* kernel FP */
+ unsigned long wchan;
+ unsigned long usp;
+ struct pt_regs *__frame;
+ unsigned long fpu_flags;
+#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */
+ struct fpu_state_struct fpu_state;
+};
+
+#define INIT_THREAD \
+{ \
+ .uregs = init_uregs, \
+ .pc = 0, \
+ .sp = 0, \
+ .a3 = 0, \
+ .wchan = 0, \
+ .__frame = NULL, \
+}
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \
+ NULL, NULL }
+
+/*
+ * do necessary setup to start up a newly executed thread
+ * - need to discard the frame stacked by the kernel thread invoking the execve
+ * syscall (see RESTORE_ALL macro)
+ */
+#define start_thread(regs, new_pc, new_sp) do { \
+ set_fs(USER_DS); \
+ __frame = current->thread.uregs; \
+ __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \
+ __frame->pc = new_pc; \
+ __frame->sp = new_sp; \
+} while (0)
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define task_pt_regs(task) \
+({ \
+ struct pt_regs *__regs__; \
+ __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
+ __regs__ - 1; \
+})
+
+#define KSTK_EIP(task) (task_pt_regs(task)->pc)
+#define KSTK_ESP(task) (task_pt_regs(task)->sp)
+
+#define KSTK_TOP(info) \
+({ \
+ (unsigned long)(info) + THREAD_SIZE; \
+})
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+
+static inline void prefetch(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+ asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+static inline void prefetchw(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+ asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+#endif /* _ASM_PROCESSOR_H */
--- /dev/null
+/* MN10300 Exception frame layout and ptrace constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#define PT_A3 0
+#define PT_A2 1
+#define PT_D3 2
+#define PT_D2 3
+#define PT_MCVF 4
+#define PT_MCRL 5
+#define PT_MCRH 6
+#define PT_MDRQ 7
+#define PT_E1 8
+#define PT_E0 9
+#define PT_E7 10
+#define PT_E6 11
+#define PT_E5 12
+#define PT_E4 13
+#define PT_E3 14
+#define PT_E2 15
+#define PT_SP 16
+#define PT_LAR 17
+#define PT_LIR 18
+#define PT_MDR 19
+#define PT_A1 20
+#define PT_A0 21
+#define PT_D1 22
+#define PT_D0 23
+#define PT_ORIG_D0 24
+#define PT_EPSW 25
+#define PT_PC 26
+#define NR_PTREGS 27
+
+#ifndef __ASSEMBLY__
+/*
+ * This defines the way registers are stored in the event of an exception
+ * - the strange order is due to the MOVM instruction
+ */
+struct pt_regs {
+ unsigned long a3; /* syscall arg 3 */
+ unsigned long a2; /* syscall arg 4 */
+ unsigned long d3; /* syscall arg 5 */
+ unsigned long d2; /* syscall arg 6 */
+ unsigned long mcvf;
+ unsigned long mcrl;
+ unsigned long mcrh;
+ unsigned long mdrq;
+ unsigned long e1;
+ unsigned long e0;
+ unsigned long e7;
+ unsigned long e6;
+ unsigned long e5;
+ unsigned long e4;
+ unsigned long e3;
+ unsigned long e2;
+ unsigned long sp;
+ unsigned long lar;
+ unsigned long lir;
+ unsigned long mdr;
+ unsigned long a1;
+ unsigned long a0; /* syscall arg 1 */
+ unsigned long d1; /* syscall arg 2 */
+ unsigned long d0; /* syscall ret */
+ struct pt_regs *next; /* next frame pointer */
+ unsigned long orig_d0; /* syscall number */
+ unsigned long epsw;
+ unsigned long pc;
+};
+#endif
+
+extern struct pt_regs *__frame; /* current frame pointer */
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD 0x00000001
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
+#define instruction_pointer(regs) ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+#endif
+
+#define profile_pc(regs) ((regs)->pc)
+
+#endif /* _ASM_PTRACE_H */
--- /dev/null
+/* MN10300 Reset controller and watchdog timer definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_RESET_REGS_H
+#define _ASM_RESET_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_MN10300_WD_TIMER
+#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */
+#endif
+
+/*
+ * watchdog timer registers
+ */
+#define WDBC __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */
+
+#define WDCTR __SYSREG(0xc0001002, u8) /* watchdog timer control reg */
+#define WDCTR_WDCK 0x07 /* clock source selection */
+#define WDCTR_WDCK_256th 0x00 /* - OSCI/256 */
+#define WDCTR_WDCK_1024th 0x01 /* - OSCI/1024 */
+#define WDCTR_WDCK_2048th 0x02 /* - OSCI/2048 */
+#define WDCTR_WDCK_16384th 0x03 /* - OSCI/16384 */
+#define WDCTR_WDCK_65536th 0x04 /* - OSCI/65536 */
+#define WDCTR_WDRST 0x40 /* binary counter reset */
+#define WDCTR_WDCNE 0x80 /* watchdog timer enable */
+
+#define RSTCTR __SYSREG(0xc0001004, u8) /* reset control reg */
+#define RSTCTR_CHIPRST 0x01 /* chip reset */
+#define RSTCTR_DBFRST 0x02 /* double fault reset flag */
+#define RSTCTR_WDTRST 0x04 /* watchdog timer reset flag */
+#define RSTCTR_WDREN 0x08 /* watchdog timer reset enable */
+
+#ifndef __ASSEMBLY__
+
+static inline void mn10300_proc_hard_reset(void)
+{
+ RSTCTR &= ~RSTCTR_CHIPRST;
+ RSTCTR |= RSTCTR_CHIPRST;
+}
+
+extern unsigned int watchdog_alert_counter;
+
+extern void watchdog_go(void);
+extern asmlinkage void watchdog_handler(void);
+extern asmlinkage
+void watchdog_interrupt(struct pt_regs *, enum exception_code);
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RESET_REGS_H */
--- /dev/null
+#include <asm-generic/resource.h>
--- /dev/null
+/* MN10300 on-chip Real-Time Clock registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_REGS_H
+#define _ASM_RTC_REGS_H
+
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+#define RTSCR __SYSREG(0xd8600000, u8) /* RTC seconds count reg */
+#define RTSAR __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */
+#define RTMCR __SYSREG(0xd8600002, u8) /* RTC minutes count reg */
+#define RTMAR __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */
+#define RTHCR __SYSREG(0xd8600004, u8) /* RTC hours count reg */
+#define RTHAR __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */
+#define RTDWCR __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */
+#define RTDMCR __SYSREG(0xd8600007, u8) /* RTC days count reg */
+#define RTMTCR __SYSREG(0xd8600008, u8) /* RTC months count reg */
+#define RTYCR __SYSREG(0xd8600009, u8) /* RTC years count reg */
+
+#define RTCRA __SYSREG(0xd860000a, u8)/* RTC control reg A */
+#define RTCRA_RS 0x0f /* periodic timer interrupt cycle setting */
+#define RTCRA_RS_NONE 0x00 /* - off */
+#define RTCRA_RS_3_90625ms 0x01 /* - 3.90625ms (1/256s) */
+#define RTCRA_RS_7_8125ms 0x02 /* - 7.8125ms (1/128s) */
+#define RTCRA_RS_122_070us 0x03 /* - 122.070us (1/8192s) */
+#define RTCRA_RS_244_141us 0x04 /* - 244.141us (1/4096s) */
+#define RTCRA_RS_488_281us 0x05 /* - 488.281us (1/2048s) */
+#define RTCRA_RS_976_5625us 0x06 /* - 976.5625us (1/1024s) */
+#define RTCRA_RS_1_953125ms 0x07 /* - 1.953125ms (1/512s) */
+#define RTCRA_RS_3_90624ms 0x08 /* - 3.90624ms (1/256s) */
+#define RTCRA_RS_7_8125ms_b 0x09 /* - 7.8125ms (1/128s) */
+#define RTCRA_RS_15_625ms 0x0a /* - 15.625ms (1/64s) */
+#define RTCRA_RS_31_25ms 0x0b /* - 31.25ms (1/32s) */
+#define RTCRA_RS_62_5ms 0x0c /* - 62.5ms (1/16s) */
+#define RTCRA_RS_125ms 0x0d /* - 125ms (1/8s) */
+#define RTCRA_RS_250ms 0x0e /* - 250ms (1/4s) */
+#define RTCRA_RS_500ms 0x0f /* - 500ms (1/2s) */
+#define RTCRA_DVR 0x40 /* divider reset */
+#define RTCRA_UIP 0x80 /* clock update flag */
+
+#define RTCRB __SYSREG(0xd860000b, u8) /* RTC control reg B */
+#define RTCRB_DSE 0x01 /* daylight savings time enable */
+#define RTCRB_TM 0x02 /* time format */
+#define RTCRB_TM_12HR 0x00 /* - 12 hour format */
+#define RTCRB_TM_24HR 0x02 /* - 24 hour format */
+#define RTCRB_DM 0x04 /* numeric value format */
+#define RTCRB_DM_BCD 0x00 /* - BCD */
+#define RTCRB_DM_BINARY 0x04 /* - binary */
+#define RTCRB_UIE 0x10 /* update interrupt disable */
+#define RTCRB_AIE 0x20 /* alarm interrupt disable */
+#define RTCRB_PIE 0x40 /* periodic interrupt disable */
+#define RTCRB_SET 0x80 /* clock update enable */
+
+#define RTSRC __SYSREG(0xd860000c, u8) /* RTC status reg C */
+#define RTSRC_UF 0x10 /* update end interrupt flag */
+#define RTSRC_AF 0x20 /* alarm interrupt flag */
+#define RTSRC_PF 0x40 /* periodic interrupt flag */
+#define RTSRC_IRQF 0x80 /* interrupt flag */
+
+#define RTIRQ 32
+#define RTICR GxICR(RTIRQ)
+
+/*
+ * MC146818 RTC compatibility defs for the MN10300 on-chip RTC
+ */
+#define RTC_PORT(x) 0xd8600000
+#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
+
+#define CMOS_READ(addr) __SYSREG(0xd8600000 + (addr), u8)
+#define CMOS_WRITE(val, addr) \
+ do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
+
+#define RTC_IRQ RTIRQ
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RTC_REGS_H */
--- /dev/null
+/* MN10300 Real time clock definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+#ifdef CONFIG_MN10300_RTC
+
+#include <linux/init.h>
+
+extern void check_rtc_time(void);
+extern void __init calibrate_clock(void);
+extern unsigned long __init get_initial_rtc_time(void);
+
+#else /* !CONFIG_MN10300_RTC */
+
+static inline void check_rtc_time(void)
+{
+}
+
+static inline void calibrate_clock(void)
+{
+}
+
+static inline unsigned long get_initial_rtc_time(void)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#include <asm-generic/rtc.h>
+
+#endif /* _ASM_RTC_H */
--- /dev/null
+/* MN10300 Scatterlist definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+/*
+ * Drivers must set either ->address or (preferred) page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg_set_page(virt_to_page(some_ptr));
+ * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset; /* for highmem, page offset */
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+#endif /* _ASM_SCATTERLIST_H */
--- /dev/null
+#include <asm-generic/sections.h>
--- /dev/null
+/* MN10300 Semaphores
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SEMAPHORE_H
+#define _ASM_SEMAPHORE_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/rwsem.h>
+
+#define SEMAPHORE_DEBUG 0
+
+/*
+ * the semaphore definition
+ * - if count is >0 then there are tokens available on the semaphore for down
+ * to collect
+ * - if count is <=0 then there are no spare tokens, and anyone that wants one
+ * must wait
+ * - if wait_list is not empty, then there are processes waiting for the
+ * semaphore
+ */
+struct semaphore {
+ atomic_t count; /* it's not really atomic, it's
+ * just that certain modules
+ * expect to be able to access
+ * it directly */
+ spinlock_t wait_lock;
+ struct list_head wait_list;
+#if SEMAPHORE_DEBUG
+ unsigned __magic;
+#endif
+};
+
+#if SEMAPHORE_DEBUG
+# define __SEM_DEBUG_INIT(name) , (long)&(name).__magic
+#else
+# define __SEM_DEBUG_INIT(name)
+#endif
+
+
+#define __SEMAPHORE_INITIALIZER(name, init_count) \
+{ \
+ .count = ATOMIC_INIT(init_count), \
+ .wait_lock = __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+ .wait_list = LIST_HEAD_INIT((name).wait_list) \
+ __SEM_DEBUG_INIT(name) \
+}
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
+#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name, 0)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+ *sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
+}
+
+static inline void init_MUTEX(struct semaphore *sem)
+{
+ sema_init(sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED(struct semaphore *sem)
+{
+ sema_init(sem, 0);
+}
+
+extern void __down(struct semaphore *sem, unsigned long flags);
+extern int __down_interruptible(struct semaphore *sem, unsigned long flags);
+extern void __up(struct semaphore *sem);
+
+static inline void down(struct semaphore *sem)
+{
+ unsigned long flags;
+ int count;
+
+#if SEMAPHORE_DEBUG
+ CHECK_MAGIC(sem->__magic);
+#endif
+
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ count = atomic_read(&sem->count);
+ if (likely(count > 0)) {
+ atomic_set(&sem->count, count - 1);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+ } else {
+ __down(sem, flags);
+ }
+}
+
+static inline int down_interruptible(struct semaphore *sem)
+{
+ unsigned long flags;
+ int count, ret = 0;
+
+#if SEMAPHORE_DEBUG
+ CHECK_MAGIC(sem->__magic);
+#endif
+
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ count = atomic_read(&sem->count);
+ if (likely(count > 0)) {
+ atomic_set(&sem->count, count - 1);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+ } else {
+ ret = __down_interruptible(sem, flags);
+ }
+ return ret;
+}
+
+/*
+ * non-blockingly attempt to down() a semaphore.
+ * - returns zero if we acquired it
+ */
+static inline int down_trylock(struct semaphore *sem)
+{
+ unsigned long flags;
+ int count, success = 0;
+
+#if SEMAPHORE_DEBUG
+ CHECK_MAGIC(sem->__magic);
+#endif
+
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ count = atomic_read(&sem->count);
+ if (likely(count > 0)) {
+ atomic_set(&sem->count, count - 1);
+ success = 1;
+ }
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+ return !success;
+}
+
+static inline void up(struct semaphore *sem)
+{
+ unsigned long flags;
+
+#if SEMAPHORE_DEBUG
+ CHECK_MAGIC(sem->__magic);
+#endif
+
+ spin_lock_irqsave(&sem->wait_lock, flags);
+ if (!list_empty(&sem->wait_list))
+ __up(sem);
+ else
+ atomic_set(&sem->count, atomic_read(&sem->count) + 1);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
+}
+
+static inline int sem_getcount(struct semaphore *sem)
+{
+ return atomic_read(&sem->count);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif
--- /dev/null
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
--- /dev/null
+/* MN10300 on-board serial port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* serial port 0 */
+#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */
+#define SC01CTR_CK 0x0007 /* clock source select */
+#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
+#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
+#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
+#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
+#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
+#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */
+#define SC01CTR_STB 0x0008 /* stop bit select */
+#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */
+#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */
+#define SC01CTR_PB 0x0070 /* parity bit select */
+#define SC01CTR_PB_NONE 0x0000 /* - no parity */
+#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
+#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
+#define SC01CTR_PB_EVEN 0x0060 /* - even parity */
+#define SC01CTR_PB_ODD 0x0070 /* - odd parity */
+#define SC01CTR_CLN 0x0080 /* character length */
+#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
+#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
+#define SC01CTR_TOE 0x0100 /* T input output enable */
+#define SC01CTR_OD 0x0200 /* bit order select */
+#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */
+#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */
+#define SC01CTR_MD 0x0c00 /* mode select */
+#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */
+#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */
+#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */
+#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */
+#define SC01CTR_IIC 0x1000 /* I2C mode select */
+#define SC01CTR_BKE 0x2000 /* break transmit enable */
+#define SC01CTR_RXE 0x4000 /* receive enable */
+#define SC01CTR_TXE 0x8000 /* transmit enable */
+
+#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */
+#define SC01ICR_DMD 0x80 /* output data mode */
+#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */
+#define SC01ICR_TI 0x10 /* transmit interrupt cause */
+#define SC01ICR_RES 0x04 /* receive error select */
+#define SC01ICR_RI 0x01 /* receive interrupt cause */
+
+#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */
+#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */
+
+#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */
+#define SC01STR_OEF 0x0001 /* overrun error found */
+#define SC01STR_PEF 0x0002 /* parity error found */
+#define SC01STR_FEF 0x0004 /* framing error found */
+#define SC01STR_RBF 0x0010 /* receive buffer status */
+#define SC01STR_TBF 0x0020 /* transmit buffer status */
+#define SC01STR_RXF 0x0040 /* receive status */
+#define SC01STR_TXF 0x0080 /* transmit status */
+#define SC01STR_STF 0x0100 /* I2C start sequence found */
+#define SC01STR_SPF 0x0200 /* I2C stop sequence found */
+
+#define SC0RXIRQ 20 /* timer 0 Receive IRQ */
+#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */
+
+#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */
+#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */
+
+/* serial port 1 */
+#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */
+#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */
+#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
+#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
+#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */
+
+#define SC1RXIRQ 22 /* timer 1 Receive IRQ */
+#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */
+
+#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */
+#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */
+
+/* serial port 2 */
+#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */
+#define SC2CTR_CK 0x0003 /* clock source select */
+#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */
+#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */
+#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */
+#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */
+#define SC2CTR_STB 0x0008 /* stop bit select */
+#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */
+#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */
+#define SC2CTR_PB 0x0070 /* parity bit select */
+#define SC2CTR_PB_NONE 0x0000 /* - no parity */
+#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
+#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
+#define SC2CTR_PB_EVEN 0x0060 /* - even parity */
+#define SC2CTR_PB_ODD 0x0070 /* - odd parity */
+#define SC2CTR_CLN 0x0080 /* character length */
+#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
+#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
+#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */
+#define SC2CTR_OD 0x0200 /* bit order select */
+#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */
+#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */
+#define SC2CTR_TWS 0x1000 /* transmit wait select */
+#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */
+#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */
+#define SC2CTR_BKE 0x2000 /* break transmit enable */
+#define SC2CTR_RXE 0x4000 /* receive enable */
+#define SC2CTR_TXE 0x8000 /* transmit enable */
+
+#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */
+#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */
+#define SC2ICR_TI 0x10 /* transmit interrupt cause */
+#define SC2ICR_RES 0x04 /* receive error select */
+#define SC2ICR_RI 0x01 /* receive interrupt cause */
+
+#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
+#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
+#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */
+#define SC2STR_OEF 0x0001 /* overrun error found */
+#define SC2STR_PEF 0x0002 /* parity error found */
+#define SC2STR_FEF 0x0004 /* framing error found */
+#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */
+#define SC2STR_RBF 0x0010 /* receive buffer status */
+#define SC2STR_TBF 0x0020 /* transmit buffer status */
+#define SC2STR_RXF 0x0040 /* receive status */
+#define SC2STR_TXF 0x0080 /* transmit status */
+
+#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */
+
+#define SC2RXIRQ 24 /* serial 2 Receive IRQ */
+#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */
+
+#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
+#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SERIAL_REGS_H */
--- /dev/null
+/* Standard UART definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD (18432000 / 16)
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#define HUB6_FLAGS 0
+#define RS_TABLE_SIZE 64
+#else
+#define RS_TABLE_SIZE
+#endif
+
+#include <asm/unit/serial.h>
--- /dev/null
+/* MN10300 Setup declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+extern void __init unit_setup(void);
+extern void __init unit_init_IRQ(void);
+
+#endif /* _ASM_SETUP_H */
--- /dev/null
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
--- /dev/null
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
--- /dev/null
+/* MN10300 Userspace signal context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+struct fpucontext {
+ /* Regular FPU environment */
+ unsigned long fs[32]; /* fpu registers */
+ unsigned long fpcr; /* fpu control register */
+};
+
+struct sigcontext {
+ unsigned long d0;
+ unsigned long d1;
+ unsigned long d2;
+ unsigned long d3;
+ unsigned long a0;
+ unsigned long a1;
+ unsigned long a2;
+ unsigned long a3;
+ unsigned long e0;
+ unsigned long e1;
+ unsigned long e2;
+ unsigned long e3;
+ unsigned long e4;
+ unsigned long e5;
+ unsigned long e6;
+ unsigned long e7;
+ unsigned long lar;
+ unsigned long lir;
+ unsigned long mdr;
+ unsigned long mcvf;
+ unsigned long mcrl;
+ unsigned long mcrh;
+ unsigned long mdrq;
+ unsigned long sp;
+ unsigned long epsw;
+ unsigned long pc;
+ struct fpucontext *fpucontext;
+ unsigned long oldmask;
+};
+
+
+#endif /* _ASM_SIGCONTEXT_H */
--- /dev/null
+#include <asm-generic/siginfo.h>
--- /dev/null
+/* MN10300 Signal definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001U
+#define SA_NOCLDWAIT 0x00000002U
+#define SA_SIGINFO 0x00000004U
+#define SA_ONSTACK 0x08000000U
+#define SA_RESTART 0x10000000U
+#define SA_NODEFER 0x40000000U
+#define SA_RESETHAND 0x80000000U
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+
+struct pt_regs;
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
--- /dev/null
+/* MN10300 SMP support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SMP_H
+#define _ASM_SMP_H
+
+#ifdef CONFIG_SMP
+#error SMP not yet supported for MN10300
+#endif
+
+#endif
--- /dev/null
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#endif /* _ASM_SOCKET_H */
--- /dev/null
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS_H */
--- /dev/null
+/* MN10300 spinlock support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error SMP spinlocks not implemented for MN10300
+
+#endif /* _ASM_SPINLOCK_H */
--- /dev/null
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+struct stat {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned long st_rdev;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO 1
+ unsigned long __st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned long long st_rdev;
+ unsigned char __pad3[4];
+
+ long long st_size;
+ unsigned long st_blksize;
+
+ unsigned long st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned long __pad4; /* future possible st_blocks high bits */
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned int st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long long st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
--- /dev/null
+#include <asm-generic/statfs.h>
--- /dev/null
+/* MN10300 Optimised string functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *dest, int ch, size_t count);
+extern void *memcpy(void *dest, const void *src, size_t count);
+extern void *memmove(void *dest, const void *src, size_t count);
+
+
+extern void __struct_cpy_bug(void);
+#define struct_cpy(x, y) \
+({ \
+ if (sizeof(*(x)) != sizeof(*(y))) \
+ __struct_cpy_bug; \
+ memcpy(x, y, sizeof(*(x))); \
+})
+
+#endif /* _ASM_STRING_H */
--- /dev/null
+/* MN10300 System definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+
+struct task_struct;
+struct thread_struct;
+
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev,
+ struct thread_struct *next,
+ struct task_struct *prev_task);
+
+/* context switching is now performed out-of-line in switch_to.S */
+#define switch_to(prev, next, last) \
+do { \
+ current->thread.wchan = (u_long) __builtin_return_address(0); \
+ (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
+ mb(); \
+ current->thread.wchan = 0; \
+} while (0)
+
+#define arch_align_stack(x) (x)
+
+#define nop() asm volatile ("nop")
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+
+#define mb() asm volatile ("": : :"memory")
+#define rmb() mb()
+#define wmb() asm volatile ("": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#endif
+
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends() do {} while (0)
+#define smp_read_barrier_depends() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * interrupt control
+ * - "disabled": run in IM1/2
+ * - level 0 - GDB stub
+ * - level 1 - virtual serial DMA (if present)
+ * - level 5 - normal interrupt priority
+ * - level 6 - timer interrupt
+ * - "enabled": run in IM7
+ */
+#ifdef CONFIG_MN10300_TTYSM
+#define MN10300_CLI_LEVEL EPSW_IM_2
+#else
+#define MN10300_CLI_LEVEL EPSW_IM_1
+#endif
+
+#define local_save_flags(x) \
+do { \
+ typecheck(unsigned long, x); \
+ asm volatile( \
+ " mov epsw,%0 \n" \
+ : "=d"(x) \
+ ); \
+} while (0)
+
+#define local_irq_disable() \
+do { \
+ asm volatile( \
+ " and %0,epsw \n" \
+ " or %1,epsw \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ : \
+ : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \
+ ); \
+} while (0)
+
+#define local_irq_save(x) \
+do { \
+ local_save_flags(x); \
+ local_irq_disable(); \
+} while (0)
+
+/*
+ * we make sure local_irq_enable() doesn't cause priority inversion
+ */
+#ifndef __ASSEMBLY__
+
+extern unsigned long __mn10300_irq_enabled_epsw;
+
+#endif
+
+#define local_irq_enable() \
+do { \
+ unsigned long tmp; \
+ \
+ asm volatile( \
+ " mov epsw,%0 \n" \
+ " and %1,%0 \n" \
+ " or %2,%0 \n" \
+ " mov %0,epsw \n" \
+ : "=&d"(tmp) \
+ : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \
+ ); \
+} while (0)
+
+#define local_irq_restore(x) \
+do { \
+ typecheck(unsigned long, x); \
+ asm volatile( \
+ " mov %0,epsw \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ : \
+ : "d"(x) \
+ : "memory", "cc" \
+ ); \
+} while (0)
+
+#define irqs_disabled() \
+({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \
+})
+
+/* hook to save power by halting the CPU
+ * - called from the idle loop
+ * - must reenable interrupts (which takes three instruction cycles to complete)
+ */
+#define safe_halt() \
+do { \
+ asm volatile(" or %0,epsw \n" \
+ " nop \n" \
+ " nop \n" \
+ " bset %2,(%1) \n" \
+ : \
+ : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
+ : "cc" \
+ ); \
+} while (0)
+
+#define STI or EPSW_IE|EPSW_IM,epsw
+#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
+
+/*****************************************************************************/
+/*
+ * MN10300 doesn't actually have an exchange instruction
+ */
+#ifndef __ASSEMBLY__
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+static inline
+unsigned long __xchg(volatile unsigned long *m, unsigned long val)
+{
+ unsigned long retval;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ retval = *m;
+ *m = val;
+ local_irq_restore(flags);
+ return retval;
+}
+
+#define xchg(ptr, v) \
+ ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \
+ (unsigned long)(v)))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+ unsigned long old, unsigned long new)
+{
+ unsigned long retval;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ retval = *m;
+ if (retval == old)
+ *m = new;
+ local_irq_restore(flags);
+ return retval;
+}
+
+#define cmpxchg(ptr, o, n) \
+ ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SYSTEM_H */
--- /dev/null
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CTVB 004000000000 /* VisioBraille Terminal flow control */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _ASM_TERMBITS_H */
--- /dev/null
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/* intr=^C quit=^| erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+ unsigned short __tmp; \
+ get_user(__tmp, &(termio)->x); \
+ *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+ copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+ copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+ copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+ copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* _ASM_TERMIOS_H */
--- /dev/null
+/* MN10300 Low-level thread information
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+#define PREEMPT_ACTIVE 0x10000000
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE (4096)
+#else
+#define THREAD_SIZE (8192)
+#endif
+
+#define STACK_WARN (THREAD_SIZE / 8)
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ * must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ __u32 cpu; /* current CPU */
+ __s32 preempt_count; /* 0 => preemptable, <0 => BUG */
+
+ mm_segment_t addr_limit; /* thread address space:
+ 0-0xBFFFFFFF for user-thead
+ 0-0xFFFFFFFF for kernel-thread
+ */
+ struct restart_block restart_block;
+
+ __u8 supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#endif
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+#define init_uregs \
+ ((struct pt_regs *) \
+ ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs)))
+
+extern struct thread_info *__current_ti;
+
+/* how to get the thread information struct from C */
+static inline __attribute__((const))
+struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+ asm("mov sp,%0\n"
+ "and %1,%0\n"
+ : "=d" (ti)
+ : "i" (~(THREAD_SIZE - 1))
+ : "cc");
+ return ti;
+}
+
+/* how to get the current stack pointer from C */
+static inline unsigned long current_stack_pointer(void)
+{
+ unsigned long sp;
+ asm("mov sp,%0; ":"=r" (sp));
+ return sp;
+}
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(ti) kfree((ti))
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __VMLINUX_LDS__
+/* how to get the thread information struct from ASM */
+.macro GET_THREAD_INFO reg
+ mov sp,\reg
+ and -THREAD_SIZE,\reg
+.endm
+#endif
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ * access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */
+#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE 17 /* OOM killer killed process */
+#define TIF_FREEZE 18 /* freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING +(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED +(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP)
+#define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE +(1 << TIF_FREEZE)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
--- /dev/null
+/* AM33v2 on-board timer module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* timer prescalar control */
+#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */
+#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */
+#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */
+
+/* 8 bit timers */
+#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */
+#define TM0MD_SRC 0x07 /* timer source */
+#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */
+#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */
+#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM1MD __SYSREG(0xd4003001, u8) /* timer 1 mode register */
+#define TM1MD_SRC 0x07 /* timer source */
+#define TM1MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM1MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM1MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */
+#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */
+#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM2MD __SYSREG(0xd4003002, u8) /* timer 2 mode register */
+#define TM2MD_SRC 0x07 /* timer source */
+#define TM2MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM2MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM2MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */
+#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */
+#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM3MD __SYSREG(0xd4003003, u8) /* timer 3 mode register */
+#define TM3MD_SRC 0x07 /* timer source */
+#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */
+#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */
+#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM01MD __SYSREG(0xd4003000, u16) /* timer 0:1 mode register */
+
+#define TM0BR __SYSREG(0xd4003010, u8) /* timer 0 base register */
+#define TM1BR __SYSREG(0xd4003011, u8) /* timer 1 base register */
+#define TM2BR __SYSREG(0xd4003012, u8) /* timer 2 base register */
+#define TM3BR __SYSREG(0xd4003013, u8) /* timer 3 base register */
+#define TM01BR __SYSREG(0xd4003010, u16) /* timer 0:1 base register */
+
+#define TM0BC __SYSREGC(0xd4003020, u8) /* timer 0 binary counter */
+#define TM1BC __SYSREGC(0xd4003021, u8) /* timer 1 binary counter */
+#define TM2BC __SYSREGC(0xd4003022, u8) /* timer 2 binary counter */
+#define TM3BC __SYSREGC(0xd4003023, u8) /* timer 3 binary counter */
+#define TM01BC __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */
+
+#define TM0IRQ 2 /* timer 0 IRQ */
+#define TM1IRQ 3 /* timer 1 IRQ */
+#define TM2IRQ 4 /* timer 2 IRQ */
+#define TM3IRQ 5 /* timer 3 IRQ */
+
+#define TM0ICR GxICR(TM0IRQ) /* timer 0 uflow intr ctrl reg */
+#define TM1ICR GxICR(TM1IRQ) /* timer 1 uflow intr ctrl reg */
+#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */
+#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */
+
+/* 16-bit timers 4,5 & 7-11 */
+#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */
+#define TM4MD_SRC 0x07 /* timer source */
+#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM4MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM4MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */
+#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM5MD __SYSREG(0xd4003082, u8) /* timer 5 mode register */
+#define TM5MD_SRC 0x07 /* timer source */
+#define TM5MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM5MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM5MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM5MD_SRC_TM4CASCADE 0x03 /* - cascade with timer 4 */
+#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */
+#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM7MD __SYSREG(0xd4003086, u8) /* timer 7 mode register */
+#define TM7MD_SRC 0x07 /* timer source */
+#define TM7MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM7MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM7MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */
+#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM8MD __SYSREG(0xd4003088, u8) /* timer 8 mode register */
+#define TM8MD_SRC 0x07 /* timer source */
+#define TM8MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM8MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM8MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM8MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
+#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */
+#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM9MD __SYSREG(0xd400308a, u8) /* timer 9 mode register */
+#define TM9MD_SRC 0x07 /* timer source */
+#define TM9MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM9MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM9MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM9MD_SRC_TM8CASCADE 0x03 /* - cascade with timer 8 */
+#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */
+#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM10MD __SYSREG(0xd400308c, u8) /* timer 10 mode register */
+#define TM10MD_SRC 0x07 /* timer source */
+#define TM10MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM10MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM10MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM10MD_SRC_TM9CASCADE 0x03 /* - cascade with timer 9 */
+#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */
+#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM11MD __SYSREG(0xd400308e, u8) /* timer 11 mode register */
+#define TM11MD_SRC 0x07 /* timer source */
+#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
+#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */
+#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */
+#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */
+#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */
+#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */
+#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */
+#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */
+#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */
+#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */
+
+#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */
+#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */
+#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */
+
+#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */
+#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */
+#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */
+#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */
+#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */
+
+#define TM4IRQ 6 /* timer 4 IRQ */
+#define TM5IRQ 7 /* timer 5 IRQ */
+#define TM7IRQ 11 /* timer 7 IRQ */
+#define TM8IRQ 12 /* timer 8 IRQ */
+#define TM9IRQ 13 /* timer 9 IRQ */
+#define TM10IRQ 14 /* timer 10 IRQ */
+#define TM11IRQ 15 /* timer 11 IRQ */
+
+#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */
+#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */
+#define TM7ICR GxICR(TM7IRQ) /* timer 7 uflow intr ctrl reg */
+#define TM8ICR GxICR(TM8IRQ) /* timer 8 uflow intr ctrl reg */
+#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */
+#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */
+#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */
+
+/* 16-bit timer 6 */
+#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */
+#define TM6MD_SRC 0x0007 /* timer source */
+#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */
+#define TM6MD_SRC_IOCLK_8 0x0001 /* - 1/8 IOCLK */
+#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */
+#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */
+#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */
+#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */
+#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */
+#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */
+#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */
+#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */
+#define TM6MD_PWM 0x3800 /* PWM output mode */
+#define TM6MD_PWM_DIS 0x0000 /* - disabled */
+#define TM6MD_PWM_10BIT 0x1000 /* - 10 bits mode */
+#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */
+#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */
+#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */
+#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */
+#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */
+
+#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */
+#define TM6MDA_OUT 0x07 /* output select */
+#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */
+#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */
+#define TM6MDA_OUT_SETA 0x02 /* - set at match A */
+#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */
+#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */
+#define TM6MDA_MODE 0xc0 /* compare A register mode */
+#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
+#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
+#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
+#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
+#define TM6MDA_EDGE 0x20 /* compare A edge select */
+#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */
+#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */
+#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */
+
+#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */
+#define TM6MDB_OUT 0x07 /* output select */
+#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */
+#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */
+#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */
+#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */
+#define TM6MDB_MODE 0xc0 /* compare B register mode */
+#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
+#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
+#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
+#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
+#define TM6MDB_EDGE 0x20 /* compare B edge select */
+#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */
+#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */
+#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */
+
+#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */
+#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */
+#define TM6BC __SYSREG(0xd40030a4, u16) /* timer6 binary counter */
+
+#define TM6IRQ 6 /* timer 6 IRQ */
+#define TM6AIRQ 9 /* timer 6A IRQ */
+#define TM6BIRQ 10 /* timer 6B IRQ */
+
+#define TM6ICR GxICR(TM6IRQ) /* timer 6 uflow intr ctrl reg */
+#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */
+#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMER_REGS_H */
--- /dev/null
+/* MN10300 Architecture time management specifications
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#include <asm/hardirq.h>
+#include <asm/unit/timex.h>
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
+ * to something appropriate, but what? */
+
+extern cycles_t cacheflush_time;
+
+#ifdef __KERNEL__
+
+static inline cycles_t get_cycles(void)
+{
+ return read_timestamp_counter();
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMEX_H */
--- /dev/null
+/* MN10300 TLB definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+extern void check_pgt_cache(void);
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+/* for now, just use the generic stuff */
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
--- /dev/null
+/* MN10300 TLB flushing functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <asm/processor.h>
+
+#define __flush_tlb() \
+do { \
+ int w; \
+ __asm__ __volatile__ \
+ (" mov %1,%0 \n" \
+ " or %2,%0 \n" \
+ " mov %0,%1 \n" \
+ : "=d"(w) \
+ : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \
+ : "memory" \
+ ); \
+} while (0)
+
+#define __flush_tlb_all() __flush_tlb()
+#define __flush_tlb_one(addr) __flush_tlb()
+
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb() flushes the current mm struct TLBs
+ * - flush_tlb_all() flushes all processes TLBs
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(mm, start, end) flushes a range of pages
+ * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+#define flush_tlb_all() \
+do { \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while (0)
+
+#define flush_tlb_mm(mm) \
+do { \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while (0)
+
+#define flush_tlb_range(vma, start, end) \
+do { \
+ unsigned long __s __attribute__((unused)) = (start); \
+ unsigned long __e __attribute__((unused)) = (end); \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while (0)
+
+
+#define __flush_tlb_global() flush_tlb_all()
+#define flush_tlb() flush_tlb_all()
+#define flush_tlb_kernel_range(start, end) \
+do { \
+ unsigned long __s __attribute__((unused)) = (start); \
+ unsigned long __e __attribute__((unused)) = (end); \
+ flush_tlb_all(); \
+} while (0)
+
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+
+#define flush_tlb_pgtables(mm, start, end) do {} while (0)
+
+#endif /* _ASM_TLBFLUSH_H */
--- /dev/null
+#include <asm-generic/topology.h>
--- /dev/null
+/* MN10300 Basic type definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide. */
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
--- /dev/null
+/* MN10300 userspace access functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF)
+#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF)
+#define USER_DS MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+ ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned int size)
+{
+ int flag = 1, tmp;
+
+ asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */
+ " bcs 0f \n"
+ " cmp %4,%1 \n" /* jump if addr+size>limit (error) */
+ " bhi 0f \n"
+ " clr %0 \n" /* mark okay */
+ "0: \n"
+ : "=r"(flag), "=&r"(tmp)
+ : "1"(addr), "ir"(size),
+ "r"(current_thread_info()->addr_limit.seg), "0"(flag)
+ : "cc"
+ );
+
+ return flag;
+}
+
+#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size))
+
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0)
+
+static inline int verify_area(int type, const void *addr, unsigned long size)
+{
+ return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern int fixup_exception(struct pt_regs *regs);
+
+#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+
+#define put_user_ret(x, ptr, ret) \
+ ({ if (put_user((x), (ptr))) return (ret); })
+#define get_user_ret(x, ptr, ret) \
+ ({ if (get_user((x), (ptr))) return (ret); })
+#define __put_user_ret(x, ptr, ret) \
+ ({ if (__put_user((x), (ptr))) return (ret); })
+#define __get_user_ret(x, ptr, ret) \
+ ({ if (__get_user((x), (ptr))) return (ret); })
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ __typeof(*(ptr)) __gu_val; \
+ unsigned long __gu_addr; \
+ int __gu_err; \
+ __gu_addr = (unsigned long) (ptr); \
+ switch (size) { \
+ case 1: __get_user_asm("bu"); break; \
+ case 2: __get_user_asm("hu"); break; \
+ case 4: __get_user_asm("" ); break; \
+ default: __get_user_unknown(); break; \
+ } \
+ x = (__typeof__(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_check(x, ptr, size) \
+({ \
+ __typeof__(*(ptr)) __gu_val; \
+ unsigned long __gu_addr; \
+ int __gu_err; \
+ __gu_addr = (unsigned long) (ptr); \
+ if (likely(__access_ok(__gu_addr,size))) { \
+ switch (size) { \
+ case 1: __get_user_asm("bu"); break; \
+ case 2: __get_user_asm("hu"); break; \
+ case 4: __get_user_asm("" ); break; \
+ default: __get_user_unknown(); break; \
+ } \
+ } \
+ else { \
+ __gu_err = -EFAULT; \
+ __gu_val = 0; \
+ } \
+ x = (__typeof__(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_asm(INSN) \
+({ \
+ asm volatile( \
+ "1:\n" \
+ " mov"INSN" %2,%1\n" \
+ " mov 0,%0\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3:\n\t" \
+ " mov %3,%0\n" \
+ " jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b, 3b\n" \
+ " .previous" \
+ : "=&r" (__gu_err), "=&r" (__gu_val) \
+ : "m" (__m(__gu_addr)), "i" (-EFAULT)); \
+})
+
+extern int __get_user_unknown(void);
+
+#define __put_user_nocheck(x, ptr, size) \
+({ \
+ union { \
+ __typeof__(*(ptr)) val; \
+ u32 bits[2]; \
+ } __pu_val; \
+ unsigned long __pu_addr; \
+ int __pu_err; \
+ __pu_val.val = (x); \
+ __pu_addr = (unsigned long) (ptr); \
+ switch (size) { \
+ case 1: __put_user_asm("bu"); break; \
+ case 2: __put_user_asm("hu"); break; \
+ case 4: __put_user_asm("" ); break; \
+ case 8: __put_user_asm8(); break; \
+ default: __pu_err = __put_user_unknown(); break; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_check(x, ptr, size) \
+({ \
+ union { \
+ __typeof__(*(ptr)) val; \
+ u32 bits[2]; \
+ } __pu_val; \
+ unsigned long __pu_addr; \
+ int __pu_err; \
+ __pu_val.val = (x); \
+ __pu_addr = (unsigned long) (ptr); \
+ if (likely(__access_ok(__pu_addr, size))) { \
+ switch (size) { \
+ case 1: __put_user_asm("bu"); break; \
+ case 2: __put_user_asm("hu"); break; \
+ case 4: __put_user_asm("" ); break; \
+ case 8: __put_user_asm8(); break; \
+ default: __pu_err = __put_user_unknown(); break; \
+ } \
+ } \
+ else { \
+ __pu_err = -EFAULT; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_asm(INSN) \
+({ \
+ asm volatile( \
+ "1:\n" \
+ " mov"INSN" %1,%2\n" \
+ " mov 0,%0\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3:\n" \
+ " mov %3,%0\n" \
+ " jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b, 3b\n" \
+ " .previous" \
+ : "=&r" (__pu_err) \
+ : "r" (__pu_val.val), "m" (__m(__pu_addr)), \
+ "i" (-EFAULT) \
+ ); \
+})
+
+#define __put_user_asm8() \
+({ \
+ asm volatile( \
+ "1: mov %1,%3 \n" \
+ "2: mov %2,%4 \n" \
+ " mov 0,%0 \n" \
+ "3: \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: \n" \
+ " mov %5,%0 \n" \
+ " jmp 2b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4 \n" \
+ " .long 1b, 4b \n" \
+ " .long 2b, 4b \n" \
+ " .previous \n" \
+ : "=&r" (__pu_err) \
+ : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \
+ "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \
+ "i" (-EFAULT) \
+ ); \
+})
+
+extern int __put_user_unknown(void);
+
+
+/*
+ * Copy To/From Userspace
+ */
+/* Generic arbitrary sized copy. */
+#define __copy_user(to, from, size) \
+do { \
+ if (size) { \
+ void *__to = to; \
+ const void *__from = from; \
+ int w; \
+ asm volatile( \
+ "0: movbu (%0),%3;\n" \
+ "1: movbu %3,(%1);\n" \
+ " inc %0;\n" \
+ " inc %1;\n" \
+ " add -1,%2;\n" \
+ " bne 0b;\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ " .previous\n" \
+ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+ : "0"(__from), "1"(__to), "2"(size) \
+ : "memory"); \
+ } \
+} while (0)
+
+#define __copy_user_zeroing(to, from, size) \
+do { \
+ if (size) { \
+ void *__to = to; \
+ const void *__from = from; \
+ int w; \
+ asm volatile( \
+ "0: movbu (%0),%3;\n" \
+ "1: movbu %3,(%1);\n" \
+ " inc %0;\n" \
+ " inc %1;\n" \
+ " add -1,%2;\n" \
+ " bne 0b;\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3:\n" \
+ " mov %2,%0\n" \
+ " clr %3\n" \
+ "4: movbu %3,(%1);\n" \
+ " inc %1;\n" \
+ " add -1,%2;\n" \
+ " bne 4b;\n" \
+ " mov %0,%2\n" \
+ " jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ " .previous\n" \
+ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+ : "0"(__from), "1"(__to), "2"(size) \
+ : "memory"); \
+ } \
+} while (0)
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline
+unsigned long __generic_copy_from_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __copy_user_zeroing(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __copy_user(to, from, n);
+ return n;
+}
+
+
+#if 0
+#error don't use - these macros don't increment to & from pointers
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user(to, from, size) \
+do { \
+ asm volatile( \
+ " mov %0,a0;\n" \
+ "0: movbu (%1),d3;\n" \
+ "1: movbu d3,(%2);\n" \
+ " add -1,a0;\n" \
+ " bne 0b;\n" \
+ "2:;" \
+ ".section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : \
+ : "d"(size), "d"(to), "d"(from) \
+ : "d3", "a0"); \
+} while (0)
+
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user_zeroing(to, from, size) \
+do { \
+ asm volatile( \
+ " mov %0,a0;\n" \
+ "0: movbu (%1),d3;\n" \
+ "1: movbu d3,(%2);\n" \
+ " add -1,a0;\n" \
+ " bne 0b;\n" \
+ "2:;" \
+ ".section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : \
+ : "d"(size), "d"(to), "d"(from) \
+ : "d3", "a0"); \
+} while (0)
+
+static inline
+unsigned long __constant_copy_to_user(void *to, const void *from,
+ unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __constant_copy_user(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user(void *to, const void *from,
+ unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ __constant_copy_user_zeroing(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __constant_copy_to_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __constant_copy_user(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __constant_copy_user_zeroing(to, from, n);
+ return n;
+}
+#endif
+
+extern unsigned long __generic_copy_to_user(void __user *, const void *,
+ unsigned long);
+extern unsigned long __generic_copy_from_user(void *, const void __user *,
+ unsigned long);
+
+#define __copy_to_user_inatomic(to, from, n) \
+ __generic_copy_to_user_nocheck((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+ __generic_copy_from_user_nocheck((to), (from), (n))
+
+#define __copy_to_user(to, from, n) \
+({ \
+ might_sleep(); \
+ __copy_to_user_inatomic((to), (from), (n)); \
+})
+
+#define __copy_from_user(to, from, n) \
+({ \
+ might_sleep(); \
+ __copy_from_user_inatomic((to), (from), (n)); \
+})
+
+
+#define copy_to_user(to, from, n) __generic_copy_to_user((to), (from), (n))
+#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n))
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *str, long n);
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+extern unsigned long clear_user(void __user *mem, unsigned long len);
+extern unsigned long __clear_user(void __user *mem, unsigned long len);
+
+#endif /* _ASM_UACCESS_H */
--- /dev/null
+/* MN10300 User context
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
--- /dev/null
+/* MN10300 Unaligned memory access handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
+
+#include <asm/types.h>
+
+#if 0
+extern int __bug_unaligned_x(void *ptr);
+
+/*
+ * What is the most efficient way of loading/storing an unaligned value?
+ *
+ * That is the subject of this file. Efficiency here is defined as
+ * minimum code size with minimum register usage for the common cases.
+ * It is currently not believed that long longs are common, so we
+ * trade efficiency for the chars, shorts and longs against the long
+ * longs.
+ *
+ * Current stats with gcc 2.7.2.2 for these functions:
+ *
+ * ptrsize get: code regs put: code regs
+ * 1 1 1 1 2
+ * 2 3 2 3 2
+ * 4 7 3 7 3
+ * 8 20 6 16 6
+ *
+ * gcc 2.95.1 seems to code differently:
+ *
+ * ptrsize get: code regs put: code regs
+ * 1 1 1 1 2
+ * 2 3 2 3 2
+ * 4 7 4 7 4
+ * 8 19 8 15 6
+ *
+ * which may or may not be more efficient (depending upon whether
+ * you can afford the extra registers). Hopefully the gcc 2.95
+ * is inteligent enough to decide if it is better to use the
+ * extra register, but evidence so far seems to suggest otherwise.
+ *
+ * Unfortunately, gcc is not able to optimise the high word
+ * out of long long >> 32, or the low word from long long << 32
+ */
+
+#define __get_unaligned_2(__p) \
+ (__p[0] | __p[1] << 8)
+
+#define __get_unaligned_4(__p) \
+ (__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
+
+#define get_unaligned(ptr) \
+({ \
+ unsigned int __v1, __v2; \
+ __typeof__(*(ptr)) __v; \
+ __u8 *__p = (__u8 *)(ptr); \
+ \
+ switch (sizeof(*(ptr))) { \
+ case 1: __v = *(ptr); break; \
+ case 2: __v = __get_unaligned_2(__p); break; \
+ case 4: __v = __get_unaligned_4(__p); break; \
+ case 8: \
+ __v2 = __get_unaligned_4((__p+4)); \
+ __v1 = __get_unaligned_4(__p); \
+ __v = ((unsigned long long)__v2 << 32 | __v1); \
+ break; \
+ default: __v = __bug_unaligned_x(__p); break; \
+ } \
+ __v; \
+})
+
+
+static inline void __put_unaligned_2(__u32 __v, register __u8 *__p)
+{
+ *__p++ = __v;
+ *__p++ = __v >> 8;
+}
+
+static inline void __put_unaligned_4(__u32 __v, register __u8 *__p)
+{
+ __put_unaligned_2(__v >> 16, __p + 2);
+ __put_unaligned_2(__v, __p);
+}
+
+static inline void __put_unaligned_8(const unsigned long long __v, __u8 *__p)
+{
+ /*
+ * tradeoff: 8 bytes of stack for all unaligned puts (2
+ * instructions), or an extra register in the long long
+ * case - go for the extra register.
+ */
+ __put_unaligned_4(__v >> 32, __p + 4);
+ __put_unaligned_4(__v, __p);
+}
+
+/*
+ * Try to store an unaligned value as efficiently as possible.
+ */
+#define put_unaligned(val, ptr) \
+ ({ \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ *(ptr) = (val); \
+ break; \
+ case 2: \
+ __put_unaligned_2((val), (__u8 *)(ptr)); \
+ break; \
+ case 4: \
+ __put_unaligned_4((val), (__u8 *)(ptr)); \
+ break; \
+ case 8: \
+ __put_unaligned_8((val), (__u8 *)(ptr)); \
+ break; \
+ default: \
+ __bug_unaligned_x(ptr); \
+ break; \
+ } \
+ (void) 0; \
+ })
+
+
+#else
+
+#define get_unaligned(ptr) (*(ptr))
+#define put_unaligned(val, ptr) ({ *(ptr) = (val); (void) 0; })
+
+#endif
+
+#endif
--- /dev/null
+/* MN10300 System call number list
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_lchown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl 110
+#define __NR_vhangup 111
+#define __NR_idle 112
+#define __NR_vm86old 113
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_modify_ldt 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_vm86 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_chown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_lchown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_chown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_mincore 218
+#define __NR_madvise 219
+#define __NR_madvise1 219 /* delete when C lib stub is removed */
+#define __NR_getdents64 220
+#define __NR_fcntl64 221
+/* 223 is unused */
+#define __NR_gettid 224
+#define __NR_readahead 225
+#define __NR_setxattr 226
+#define __NR_lsetxattr 227
+#define __NR_fsetxattr 228
+#define __NR_getxattr 229
+#define __NR_lgetxattr 230
+#define __NR_fgetxattr 231
+#define __NR_listxattr 232
+#define __NR_llistxattr 233
+#define __NR_flistxattr 234
+#define __NR_removexattr 235
+#define __NR_lremovexattr 236
+#define __NR_fremovexattr 237
+#define __NR_tkill 238
+#define __NR_sendfile64 239
+#define __NR_futex 240
+#define __NR_sched_setaffinity 241
+#define __NR_sched_getaffinity 242
+#define __NR_set_thread_area 243
+#define __NR_get_thread_area 244
+#define __NR_io_setup 245
+#define __NR_io_destroy 246
+#define __NR_io_getevents 247
+#define __NR_io_submit 248
+#define __NR_io_cancel 249
+#define __NR_fadvise64 250
+
+#define __NR_exit_group 252
+#define __NR_lookup_dcookie 253
+#define __NR_epoll_create 254
+#define __NR_epoll_ctl 255
+#define __NR_epoll_wait 256
+#define __NR_remap_file_pages 257
+#define __NR_set_tid_address 258
+#define __NR_timer_create 259
+#define __NR_timer_settime (__NR_timer_create+1)
+#define __NR_timer_gettime (__NR_timer_create+2)
+#define __NR_timer_getoverrun (__NR_timer_create+3)
+#define __NR_timer_delete (__NR_timer_create+4)
+#define __NR_clock_settime (__NR_timer_create+5)
+#define __NR_clock_gettime (__NR_timer_create+6)
+#define __NR_clock_getres (__NR_timer_create+7)
+#define __NR_clock_nanosleep (__NR_timer_create+8)
+#define __NR_statfs64 268
+#define __NR_fstatfs64 269
+#define __NR_tgkill 270
+#define __NR_utimes 271
+#define __NR_fadvise64_64 272
+#define __NR_vserver 273
+#define __NR_mbind 274
+#define __NR_get_mempolicy 275
+#define __NR_set_mempolicy 276
+#define __NR_mq_open 277
+#define __NR_mq_unlink (__NR_mq_open+1)
+#define __NR_mq_timedsend (__NR_mq_open+2)
+#define __NR_mq_timedreceive (__NR_mq_open+3)
+#define __NR_mq_notify (__NR_mq_open+4)
+#define __NR_mq_getsetattr (__NR_mq_open+5)
+#define __NR_kexec_load 283
+#define __NR_waitid 284
+#define __NR_add_key 286
+#define __NR_request_key 287
+#define __NR_keyctl 288
+#define __NR_cacheflush 289
+#define __NR_ioprio_set 290
+#define __NR_ioprio_get 291
+#define __NR_inotify_init 292
+#define __NR_inotify_add_watch 293
+#define __NR_inotify_rm_watch 294
+#define __NR_migrate_pages 295
+#define __NR_openat 296
+#define __NR_mkdirat 297
+#define __NR_mknodat 298
+#define __NR_fchownat 299
+#define __NR_futimesat 300
+#define __NR_fstatat64 301
+#define __NR_unlinkat 302
+#define __NR_renameat 303
+#define __NR_linkat 304
+#define __NR_symlinkat 305
+#define __NR_readlinkat 306
+#define __NR_fchmodat 307
+#define __NR_faccessat 308
+#define __NR_pselect6 309
+#define __NR_ppoll 310
+#define __NR_unshare 311
+#define __NR_set_robust_list 312
+#define __NR_get_robust_list 313
+#define __NR_splice 314
+#define __NR_sync_file_range 315
+#define __NR_tee 316
+#define __NR_vmsplice 317
+#define __NR_move_pages 318
+#define __NR_getcpu 319
+#define __NR_epoll_pwait 320
+#define __NR_utimensat 321
+#define __NR_signalfd 322
+#define __NR_timerfd_create 323
+#define __NR_eventfd 324
+#define __NR_fallocate 325
+#define __NR_timerfd_settime 326
+#define __NR_timerfd_gettime 327
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 326
+
+/*
+ * specify the deprecated syscalls we want to support on this arch
+ */
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
--- /dev/null
+/* ASB2303-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK 33333333UL
+/* #define MN10300_IOBCLK 66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK MN10300_IOCLK
+#define MN10300_TSCCLK MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
--- /dev/null
+/* ASB2303-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32)
+#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+
+/* flip the 7-segment LEDs between "G" and "-" */
+#define mn10300_set_gdbleds(ONOFF) \
+do { \
+ ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \
+} while (0)
+
+/* indicate double-fault by displaying "d" on the LEDs */
+#define mn10300_set_dbfleds \
+ mov 0x43,d0 ; \
+ movbu d0,(ASB2303_7SEGLEDS)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code code);
+extern void peripheral_leds_led_chase(void);
+extern void debug_to_serial(const char *p, int n);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
--- /dev/null
+/* ASB2303-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
+#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000
+
+#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ }, \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define LSR_WAIT_FOR(STATE) \
+do { \
+ while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE) \
+do { \
+ while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \
+} while (0)
+#define FLOWCTL_CLEAR(LINE) \
+do { \
+ GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE) \
+do { \
+ GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ for (; n > 0; n--) {
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+
+ ch = *p++;
+ if (ch == 0x0a) {
+ GDBPORT_SERIAL_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+ }
+ GDBPORT_SERIAL_TX = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
--- /dev/null
+/* Support for the SMC91C111 NIC on an ASB2303
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SMC91111_H
+#define _ASM_UNIT_SMC91111_H
+
+#include <asm/intctl-regs.h>
+
+#define SMC91111_BASE 0xAA000300UL
+#define SMC91111_BASE_END 0xAA000400UL
+#define SMC91111_IRQ XIRQ3
+
+#define SMC_CAN_USE_8BIT 0
+#define SMC_CAN_USE_16BIT 1
+#define SMC_CAN_USE_32BIT 0
+#define SMC_NOWAIT 1
+#define SMC_IRQ_FLAGS (0)
+
+#if SMC_CAN_USE_8BIT
+#define SMC_inb(a, r) inb((unsigned long) ((a) + (r)))
+#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r)))
+#endif
+
+#if SMC_CAN_USE_16BIT
+#define SMC_inw(a, r) inw((unsigned long) ((a) + (r)))
+#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r)))
+#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#if SMC_CAN_USE_32BIT
+#define SMC_inl(a, r) inl((unsigned long) ((a) + (r)))
+#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r)))
+#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#define RPC_LSA_DEFAULT RPC_LED_100_10
+#define RPC_LSB_DEFAULT RPC_LED_TX_RX
+
+#define set_irq_type(irq, type)
+
+#endif /* _ASM_UNIT_SMC91111_H */
--- /dev/null
+/* ASB2303-specific timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/timer-regs.h>
+#include <asm/unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX 0xffff
+#define TMJCBC TM01BC
+
+#define TMJCMD TM01MD
+#define TMJCBR TM01BR
+#define TMJCIRQ TM1IRQ
+#define TMJCICR TM1ICR
+#define TMJCICR_LEVEL GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+ unsigned rate;
+ u16 md, t16;
+
+ /* use as little prescaling as possible to avoid losing accuracy */
+ md = TM0MD_SRC_IOCLK;
+ rate = MN10300_JCCLK / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_8;
+ rate = MN10300_JCCLK / 8 / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_32;
+ rate = MN10300_JCCLK / 32 / HZ;
+
+ if (rate > TMJCBR_MAX)
+ BUG();
+ }
+ }
+
+ TMJCBR = rate - 1;
+ t16 = TMJCBR;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_INIT_COUNTER |
+ TM1MD_INIT_COUNTER << 8;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_COUNT_ENABLE |
+ TM1MD_COUNT_ENABLE << 8;
+
+ t16 = TMJCMD;
+
+ TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX 0xffffffff
+#define TMTSCBC TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+ /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+ * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+ */
+ TM45BR = TMTSCBR_MAX;
+
+ TM4MD = TM4MD_SRC_IOCLK;
+ TM4MD |= TM4MD_INIT_COUNTER;
+ TM4MD &= ~TM4MD_INIT_COUNTER;
+ TM4ICR = 0;
+
+ TM5MD = TM5MD_SRC_TM4CASCADE;
+ TM5MD |= TM5MD_INIT_COUNTER;
+ TM5MD &= ~TM5MD_INIT_COUNTER;
+ TM5ICR = 0;
+
+ TM5MD |= TM5MD_COUNT_ENABLE;
+ TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+ TM4MD = 0;
+ TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+ return (cycles_t)TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
--- /dev/null
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK 33333333UL
+/* #define MN10300_IOBCLK 66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK MN10300_IOCLK
+#define MN10300_TSCCLK MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
--- /dev/null
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset() \
+do { \
+ P0OUT &= 0xbf; \
+ P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds \
+ mov 0x43077f1d,d0 ; \
+ mov d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF) \
+do { \
+ ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
--- /dev/null
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
+#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE) \
+do { \
+ while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE) \
+do { \
+ while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \
+} while (0)
+#define FLOWCTL_CLEAR(LINE) \
+do { \
+ TTYS0_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE) \
+do { \
+ TTYS0_MCR |= UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ for (; n > 0; n--) {
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+
+ ch = *p++;
+ if (ch == 0x0a) {
+ TTYS0_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+ }
+ TTYS0_TX = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
--- /dev/null
+/* ASB2305 timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/cpu/timer-regs.h>
+#include <asm/unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX 0xffff
+#define TMJCBC TM01BC
+
+#define TMJCMD TM01MD
+#define TMJCBR TM01BR
+#define TMJCIRQ TM1IRQ
+#define TMJCICR TM1ICR
+#define TMJCICR_LEVEL GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+ unsigned rate;
+ u16 md, t16;
+
+ /* use as little prescaling as possible to avoid losing accuracy */
+ md = TM0MD_SRC_IOCLK;
+ rate = MN10300_JCCLK / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_8;
+ rate = MN10300_JCCLK / 8 / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_32;
+ rate = MN10300_JCCLK / 32 / HZ;
+
+ if (rate > TMJCBR_MAX)
+ BUG();
+ }
+ }
+
+ TMJCBR = rate - 1;
+ t16 = TMJCBR;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_INIT_COUNTER |
+ TM1MD_INIT_COUNTER << 8;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_COUNT_ENABLE |
+ TM1MD_COUNT_ENABLE << 8;
+
+ t16 = TMJCMD;
+
+ TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX 0xffffffff
+#define TMTSCBC TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+ /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+ * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+ */
+ TM45BR = TMTSCBR_MAX;
+
+ TM4MD = TM4MD_SRC_IOCLK;
+ TM4MD |= TM4MD_INIT_COUNTER;
+ TM4MD &= ~TM4MD_INIT_COUNTER;
+ TM4ICR = 0;
+
+ TM5MD = TM5MD_SRC_TM4CASCADE;
+ TM5MD |= TM5MD_INIT_COUNTER;
+ TM5MD &= ~TM5MD_INIT_COUNTER;
+ TM5ICR = 0;
+
+ TM5MD |= TM5MD_COUNT_ENABLE;
+ TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+ TM4MD = 0;
+ TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+ return (cycles_t) TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
--- /dev/null
+/* MN10300 User process data
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <linux/ptrace.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * When the kernel dumps core, it starts by dumping the user struct - this will
+ * be used by gdb to figure out where the data and stack segments are within
+ * the file, and what virtual addresses to use.
+ */
+struct user {
+ /* We start with the registers, to mimic the way that "memory" is
+ * returned from the ptrace(3,...) function.
+ */
+ struct pt_regs regs; /* Where the registers are actually stored */
+
+ /* The rest of this junk is to help gdb figure out what goes where */
+ unsigned long int u_tsize; /* Text segment size (pages). */
+ unsigned long int u_dsize; /* Data segment size (pages). */
+ unsigned long int u_ssize; /* Stack segment size (pages). */
+ unsigned long start_code; /* Starting virtual address of text. */
+ unsigned long start_stack; /* Starting virtual address of stack area.
+ This is actually the bottom of the stack,
+ the top of the stack is always found in the
+ esp register. */
+ long int signal; /* Signal that caused the core dump. */
+ int reserved; /* No longer used */
+ struct user_pt_regs *u_ar0; /* Used by gdb to help find the values for */
+
+ /* the registers */
+ unsigned long magic; /* To uniquely identify a core file */
+ char u_comm[32]; /* User command that was responsible */
+};
+#endif
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR +(u.start_code)
+#define HOST_STACK_END_ADDR +(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
--- /dev/null
+/* MN10300 VGA register definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+
+
+#endif /* _ASM_VGA_H */
--- /dev/null
+#include <asm-generic/xor.h>
#define EM_V850 87 /* NEC v850 */
#define EM_M32R 88 /* Renesas M32R */
#define EM_H8_300 46 /* Renesas H8/300,300H,H8S */
+#define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */
#define EM_BLACKFIN 106 /* ADI Blackfin Processor */
#define EM_FRV 0x5441 /* Fujitsu FR-V */
#define EM_AVR32 0x18ad /* Atmel AVR32 */
#define EM_CYGNUS_M32R 0x9041
/* This is the old interim value for S/390 architecture */
#define EM_S390_OLD 0xA390
+/* Also Panasonic/MEI MN10300, AM33 */
+#define EM_CYGNUS_MN10300 0xbeef
#endif /* _LINUX_ELF_EM_H */
extern int tainted;
extern const char *print_tainted(void);
extern void add_taint(unsigned);
+extern int root_mountflags;
/* Values used for system_state */
extern enum system_states {
config DEBUG_BUGVERBOSE
bool "Verbose BUG() reporting (adds 70K)" if DEBUG_KERNEL && EMBEDDED
depends on BUG
- depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || FRV || SUPERH || GENERIC_BUG || BLACKFIN
+ depends on ARM || AVR32 || M32R || M68K || SPARC32 || SPARC64 || \
+ FRV || SUPERH || GENERIC_BUG || BLACKFIN || MN10300
default !EMBEDDED
help
Say Y here to make BUG() panics output the file name and line number
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || AVR32 || SUPERH || BLACKFIN)
+ depends on DEBUG_KERNEL && \
+ (X86 || CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
+ AVR32 || SUPERH || BLACKFIN || MN10300)
default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff