libata: set NODEV_HINT for 0x7f status

Asus Pundit-R with atiixp controller has the second port missing and,
very unusually, its status is stuck at 0x7f and all others at 0.  This
meanst that it fails TF access test but gets detected as a disk due to
classification code check and then evades polling IDENTIFY presence
detection thanks to the missing BSY in the status value causing
excessive delays during boot.

This patch makes libata-sff HSM set NODEV_HINT if the status is 0x7f
to make polling IDENTIFY presence detection work for these machines.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 0a8567c..0b299b0 100644 (file)
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1358,6 +1358,16 @@ fsm_start:
                                        qc->err_mask |= AC_ERR_HSM;
                                }
 
+                               /* There are oddball controllers with
+                                * status register stuck at 0x7f and
+                                * lbal/m/h at zero which makes it
+                                * pass all other presence detection
+                                * mechanisms we have.  Set NODEV_HINT
+                                * for it.  Kernel bz#7241.
+                                */
+                               if (status == 0x7f)
+                                       qc->err_mask |= AC_ERR_NODEV_HINT;
+
                                /* ata_pio_sectors() might change the
                                 * state to HSM_ST_LAST. so, the state
                                 * is changed after ata_pio_sectors().