spi_s3c24xx: fix clock rate calculation

Currently the clock rate calculation may round as pleased, which means
that it is possible that we will round down and end up with a faster clock
rate than intended.

Change the calculation to use DIV_ROUND_UP() to ensure that we end up with
a clock rate either the same as or lower than the user requested one.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index e0d44af..590be85 100644 (file)
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -111,6 +111,7 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
        unsigned int bpw;
        unsigned int hz;
        unsigned int div;
+       unsigned long clk;
 
        bpw = t ? t->bits_per_word : spi->bits_per_word;
        hz  = t ? t->speed_hz : spi->max_speed_hz;
@@ -120,20 +121,16 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
                return -EINVAL;
        }
 
-       div = clk_get_rate(hw->clk) / hz;
-
-       /* is clk = pclk / (2 * (pre+1)), or is it
-        *    clk = (pclk * 2) / ( pre + 1) */
-
-       div /= 2;
-
-       if (div > 0)
-               div -= 1;
+       clk = clk_get_rate(hw->clk);
+       div = DIV_ROUND_UP(clk, hz * 2) - 1;
 
        if (div > 255)
                div = 255;
 
-       dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+       dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
+               div, hz, clk / (2 * (div + 1)));
+
+
        writeb(div, hw->regs + S3C2410_SPPRE);
 
        spin_lock(&hw->bitbang.lock);