Staging: rtl8187se: merge r8180_pm.c with r8180_core.c

* merge r8180_pm.c with r8180_core.c
* make functions static

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile
index 15cbecf..98b2300 100644 (file)
--- a/drivers/staging/rtl8187se/Makefile
+++ b/drivers/staging/rtl8187se/Makefile
@@ -25,7 +25,6 @@ rtl8187se-objs :=                     \
                r8180_rtl8225z2.o       \
                r8185b_init.o           \
                r8180_dm.o              \
-               r8180_pm.o              \
                ieee80211/dot11d.o                      \
                ieee80211/ieee80211_softmac.o           \
                ieee80211/ieee80211_rx.o                \

diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 1864682..6875606 100644 (file)
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -22,6 +22,9 @@
 
    A big big thanks goes also to Realtek corp. for their help in my attempt to
    add RTL8185 and RTL8225 support, and to David Young also.
+
+   Power management interface routines.
+   Written by Mariusz Matuszek.
 */
 
 #undef RX_DONT_PASS_UL
@@ -37,8 +40,6 @@
 #include "r8180_wx.h"
 #include "r8180_dm.h"
 
-#include "r8180_pm.h"
-
 #include "ieee80211/dot11d.h"
 
 #ifndef PCI_VENDOR_ID_BELKIN
@@ -121,6 +122,64 @@ static void rtl8180_shutdown (struct pci_dev *pdev)
        pci_disable_device(pdev);
 }
 
+static int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+       struct net_device *dev = pci_get_drvdata(pdev);
+
+       if (!netif_running(dev))
+               goto out_pci_suspend;
+
+       if (dev->netdev_ops->ndo_stop)
+               dev->netdev_ops->ndo_stop(dev);
+
+       netif_device_detach(dev);
+
+out_pci_suspend:
+       pci_save_state(pdev);
+       pci_disable_device(pdev);
+       pci_set_power_state(pdev, pci_choose_state(pdev, state));
+       return 0;
+}
+
+static int rtl8180_resume(struct pci_dev *pdev)
+{
+       struct net_device *dev = pci_get_drvdata(pdev);
+       int err;
+       u32 val;
+
+       pci_set_power_state(pdev, PCI_D0);
+
+       err = pci_enable_device(pdev);
+       if (err) {
+               printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
+                               dev->name);
+
+               return err;
+       }
+
+       pci_restore_state(pdev);
+
+       /*
+        * Suspend/Resume resets the PCI configuration space, so we have to
+        * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
+        * from interfering with C3 CPU state. pci_restore_state won't help
+        * here since it only restores the first 64 bytes pci config header.
+        */
+       pci_read_config_dword(pdev, 0x40, &val);
+       if ((val & 0x0000ff00) != 0)
+               pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
+       if (!netif_running(dev))
+               goto out;
+
+       if (dev->netdev_ops->ndo_open)
+               dev->netdev_ops->ndo_open(dev);
+
+       netif_device_attach(dev);
+out:
+       return 0;
+}
+
 static struct pci_driver rtl8180_pci_driver = {
        .name           = RTL8180_MODULE_NAME,            /* Driver name   */
        .id_table       = rtl8180_pci_id_tbl,             /* PCI_ID table  */

diff --git a/drivers/staging/rtl8187se/r8180_pm.c b/drivers/staging/rtl8187se/r8180_pm.c
deleted file mode 100644 (file)
index 56a5ff9..0000000
--- a/drivers/staging/rtl8187se/r8180_pm.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
-   Power management interface routines.
-   Written by Mariusz Matuszek.
-   This code is currently just a placeholder for later work and
-   does not do anything useful.
-
-   This is part of rtl8180 OpenSource driver.
-   Copyright (C) Andrea Merello 2004  <andreamrl@tiscali.it>
-   Released under the terms of GPL (General Public Licence)
-*/
-
-
-
-#include "r8180_hw.h"
-#include "r8180_pm.h"
-#include "r8180.h"
-
-int rtl8180_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-       struct net_device *dev = pci_get_drvdata(pdev);
-
-       if (!netif_running(dev))
-               goto out_pci_suspend;
-
-       if (dev->netdev_ops->ndo_stop)
-               dev->netdev_ops->ndo_stop(dev);
-
-       netif_device_detach(dev);
-
-out_pci_suspend:
-       pci_save_state(pdev);
-       pci_disable_device(pdev);
-       pci_set_power_state(pdev, pci_choose_state(pdev, state));
-       return 0;
-}
-
-int rtl8180_resume(struct pci_dev *pdev)
-{
-       struct net_device *dev = pci_get_drvdata(pdev);
-       int err;
-       u32 val;
-
-       pci_set_power_state(pdev, PCI_D0);
-
-       err = pci_enable_device(pdev);
-       if (err) {
-               printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
-                               dev->name);
-
-               return err;
-       }
-
-       pci_restore_state(pdev);
-
-       /*
-        * Suspend/Resume resets the PCI configuration space, so we have to
-        * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
-        * from interfering with C3 CPU state. pci_restore_state won't help
-        * here since it only restores the first 64 bytes pci config header.
-        */
-       pci_read_config_dword(pdev, 0x40, &val);
-       if ((val & 0x0000ff00) != 0)
-               pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
-
-       if (!netif_running(dev))
-               goto out;
-
-       if (dev->netdev_ops->ndo_open)
-               dev->netdev_ops->ndo_open(dev);
-
-       netif_device_attach(dev);
-out:
-       return 0;
-}

diff --git a/drivers/staging/rtl8187se/r8180_pm.h b/drivers/staging/rtl8187se/r8180_pm.h
deleted file mode 100644 (file)
index 48ab9cd..0000000
--- a/drivers/staging/rtl8187se/r8180_pm.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-        Power management interface routines.
-       Written by Mariusz Matuszek.
-       This code is currently just a placeholder for later work and
-       does not do anything useful.
-
-       This is part of rtl8180 OpenSource driver.
-       Copyright (C) Andrea Merello 2004  <andreamrl@tiscali.it>
-       Released under the terms of GPL (General Public Licence)
-
-*/
-
-
-#ifndef R8180_PM_H
-#define R8180_PM_H
-
-#include <linux/types.h>
-#include <linux/pci.h>
-
-int rtl8180_suspend (struct pci_dev *pdev, pm_message_t state);
-int rtl8180_resume (struct pci_dev *pdev);
-
-#endif //R8180_PM_H
-

diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index b88648a..ed5d19c 100644 (file)
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -26,8 +26,6 @@ Notes:
 #include "r8180_93cx6.h"   /* Card EEPROM */
 #include "r8180_wx.h"
 
-#include "r8180_pm.h"
-
 #include "ieee80211/dot11d.h"