with hotkey_report_mode.
+Brightness hotkey notes:
+
+These are the current sane choices for brightness key mapping in
+thinkpad-acpi:
+
+For IBM and Lenovo models *without* ACPI backlight control (the ones on
+which thinkpad-acpi will autoload its backlight interface by default,
+and on which ACPI video does not export a backlight interface):
+
+1. Don't enable or map the brightness hotkeys in thinkpad-acpi, as
+ these older firmware versions unfortunately won't respect the hotkey
+ mask for brightness keys anyway, and always reacts to them. This
+ usually work fine, unless X.org drivers are doing something to block
+ the BIOS. In that case, use (3) below. This is the default mode of
+ operation.
+
+2. Enable the hotkeys, but map them to something else that is NOT
+ KEY_BRIGHTNESS_UP/DOWN or any other keycode that would cause
+ userspace to try to change the backlight level, and use that as an
+ on-screen-display hint.
+
+3. IF AND ONLY IF X.org drivers find a way to block the firmware from
+ automatically changing the brightness, enable the hotkeys and map
+ them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN, and feed that to
+ something that calls xbacklight. thinkpad-acpi will not be able to
+ change brightness in that case either, so you should disable its
+ backlight interface.
+
+For Lenovo models *with* ACPI backlight control:
+
+1. Load up ACPI video and use that. ACPI video will report ACPI
+ events for brightness change keys. Do not mess with thinkpad-acpi
+ defaults in this case. thinkpad-acpi should not have anything to do
+ with backlight events in a scenario where ACPI video is loaded:
+ brightness hotkeys must be disabled, and the backlight interface is
+ to be kept disabled as well. This is the default mode of operation.
+
+2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
+ and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process
+ these keys on userspace somehow (e.g. by calling xbacklight).
+
Bluetooth
---------
dim the display.
+WARNING:
+
+ Whatever you do, do NOT ever call thinkpad-acpi backlight-level change
+ interface and the ACPI-based backlight level change interface
+ (available on newer BIOSes, and driven by the Linux ACPI video driver)
+ at the same time. The two will interact in bad ways, do funny things,
+ and maybe reduce the life of the backlight lamps by needlessly kicking
+ its level up and down at every change.
+
Volume control -- /proc/acpi/ibm/volume
---------------------------------------
u32 light:1;
u32 light_status:1;
u32 bright_16levels:1;
+ u32 bright_acpimode:1;
u32 wan:1;
u32 fan_ctrl_status_undef:1;
u32 input_device_registered:1;
return 0;
}
+static int __init tpacpi_query_bcl_levels(acpi_handle handle)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ int rc;
+
+ if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) {
+ obj = (union acpi_object *)buffer.pointer;
+ if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
+ printk(TPACPI_ERR "Unknown _BCL data, "
+ "please report this to %s\n", TPACPI_MAIL);
+ rc = 0;
+ } else {
+ rc = obj->package.count;
+ }
+ } else {
+ return 0;
+ }
+
+ kfree(buffer.pointer);
+ return rc;
+}
+
+static acpi_status __init tpacpi_acpi_walk_find_bcl(acpi_handle handle,
+ u32 lvl, void *context, void **rv)
+{
+ char name[ACPI_PATH_SEGMENT_LENGTH];
+ struct acpi_buffer buffer = { sizeof(name), &name };
+
+ if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
+ !strncmp("_BCL", name, sizeof(name) - 1)) {
+ BUG_ON(!rv || !*rv);
+ **(int **)rv = tpacpi_query_bcl_levels(handle);
+ return AE_CTRL_TERMINATE;
+ } else {
+ return AE_OK;
+ }
+}
+
+/*
+ * Returns 0 (no ACPI _BCL or _BCL invalid), or size of brightness map
+ */
+static int __init tpacpi_check_std_acpi_brightness_support(void)
+{
+ int status;
+ int bcl_levels = 0;
+ void *bcl_ptr = &bcl_levels;
+
+ if (!vid_handle) {
+ TPACPI_ACPIHANDLE_INIT(vid);
+ }
+ if (!vid_handle)
+ return 0;
+
+ /*
+ * Search for a _BCL method, and execute it. This is safe on all
+ * ThinkPads, and as a side-effect, _BCL will place a Lenovo Vista
+ * BIOS in ACPI backlight control mode. We do NOT have to care
+ * about calling the _BCL method in an enabled video device, any
+ * will do for our purposes.
+ */
+
+ status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3,
+ tpacpi_acpi_walk_find_bcl, NULL,
+ &bcl_ptr);
+
+ if (ACPI_SUCCESS(status) && bcl_levels > 2) {
+ tp_features.bright_acpimode = 1;
+ return (bcl_levels - 2);
+ }
+
+ return 0;
+}
+
/*************************************************************************
* thinkpad-acpi driver attributes
*/
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
+ /* These either have to go through ACPI video, or
+ * act like in the IBM ThinkPads, so don't ever
+ * enable them by default */
KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
KEY_RESERVED, /* 0x10: FN+END (brightness down) */
set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit);
}
+ /* Do not issue duplicate brightness change events to
+ * userspace */
+ if (!tp_features.bright_acpimode)
+ /* update bright_acpimode... */
+ tpacpi_check_std_acpi_brightness_support();
+
+ if (tp_features.bright_acpimode) {
+ printk(TPACPI_INFO
+ "This ThinkPad has standard ACPI backlight "
+ "brightness control, supported by the ACPI "
+ "video driver\n");
+ printk(TPACPI_NOTICE
+ "Disabling thinkpad-acpi brightness events "
+ "by default...\n");
+
+ /* The hotkey_reserved_mask change below is not
+ * necessary while the keys are at KEY_RESERVED in the
+ * default map, but better safe than sorry, leave it
+ * here as a marker of what we have to do, especially
+ * when we finally become able to set this at runtime
+ * on response to X.org requests */
+ hotkey_reserved_mask |=
+ (1 << TP_ACPI_HOTKEYSCAN_FNHOME)
+ | (1 << TP_ACPI_HOTKEYSCAN_FNEND);
+ }
+
dbg_printk(TPACPI_DBG_INIT,
"enabling hot key handling\n");
res = hotkey_status_set(1);
/* --------------------------------------------------------------------- */
-static int __init tpacpi_query_bcll_levels(acpi_handle handle)
-{
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- union acpi_object *obj;
- int rc;
-
- if (ACPI_SUCCESS(acpi_evaluate_object(handle, NULL, NULL, &buffer))) {
- obj = (union acpi_object *)buffer.pointer;
- if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) {
- printk(TPACPI_ERR "Unknown BCLL data, "
- "please report this to %s\n", TPACPI_MAIL);
- rc = 0;
- } else {
- rc = obj->package.count;
- }
- } else {
- return 0;
- }
-
- kfree(buffer.pointer);
- return rc;
-}
-
-static acpi_status __init brightness_find_bcll(acpi_handle handle, u32 lvl,
- void *context, void **rv)
-{
- char name[ACPI_PATH_SEGMENT_LENGTH];
- struct acpi_buffer buffer = { sizeof(name), &name };
-
- if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
- !strncmp("BCLL", name, sizeof(name) - 1)) {
- if (tpacpi_query_bcll_levels(handle) == 16) {
- *rv = handle;
- return AE_CTRL_TERMINATE;
- } else {
- return AE_OK;
- }
- } else {
- return AE_OK;
- }
-}
-
-static int __init brightness_check_levels(void)
-{
- int status;
- void *found_node = NULL;
-
- if (!vid_handle) {
- TPACPI_ACPIHANDLE_INIT(vid);
- }
- if (!vid_handle)
- return 0;
-
- /* Search for a BCLL package with 16 levels */
- status = acpi_walk_namespace(ACPI_TYPE_PACKAGE, vid_handle, 3,
- brightness_find_bcll, NULL,
- &found_node);
-
- return (ACPI_SUCCESS(status) && found_node != NULL);
-}
-
-static acpi_status __init brightness_find_bcl(acpi_handle handle, u32 lvl,
- void *context, void **rv)
-{
- char name[ACPI_PATH_SEGMENT_LENGTH];
- struct acpi_buffer buffer = { sizeof(name), &name };
-
- if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)) &&
- !strncmp("_BCL", name, sizeof(name) - 1)) {
- *rv = handle;
- return AE_CTRL_TERMINATE;
- } else {
- return AE_OK;
- }
-}
-
-static int __init brightness_check_std_acpi_support(void)
-{
- int status;
- void *found_node = NULL;
-
- if (!vid_handle) {
- TPACPI_ACPIHANDLE_INIT(vid);
- }
- if (!vid_handle)
- return 0;
-
- /* Search for a _BCL method, but don't execute it */
- status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3,
- brightness_find_bcl, NULL, &found_node);
-
- return (ACPI_SUCCESS(status) && found_node != NULL);
-}
-
static int __init brightness_init(struct ibm_init_struct *iibm)
{
int b;
mutex_init(&brightness_mutex);
- if (!brightness_enable) {
- dbg_printk(TPACPI_DBG_INIT,
- "brightness support disabled by "
- "module parameter\n");
- return 1;
- } else if (brightness_enable > 1) {
- if (brightness_check_std_acpi_support()) {
+ /*
+ * We always attempt to detect acpi support, so as to switch
+ * Lenovo Vista BIOS to ACPI brightness mode even if we are not
+ * going to publish a backlight interface
+ */
+ b = tpacpi_check_std_acpi_brightness_support();
+ if (b > 0) {
+ if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
+ printk(TPACPI_NOTICE
+ "Lenovo BIOS switched to ACPI backlight "
+ "control mode\n");
+ }
+ if (brightness_enable > 1) {
printk(TPACPI_NOTICE
"standard ACPI backlight interface "
"available, not loading native one...\n");
}
}
+ if (!brightness_enable) {
+ dbg_printk(TPACPI_DBG_INIT,
+ "brightness support disabled by "
+ "module parameter\n");
+ return 1;
+ }
+
+ if (b > 16) {
+ printk(TPACPI_ERR
+ "Unsupported brightness interface, "
+ "please contact %s\n", TPACPI_MAIL);
+ return 1;
+ }
+ if (b == 16)
+ tp_features.bright_16levels = 1;
+
if (!brightness_mode) {
if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO)
brightness_mode = 2;
if (brightness_mode > 3)
return -EINVAL;
- tp_features.bright_16levels =
- thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO &&
- brightness_check_levels();
-
b = brightness_get(NULL);
if (b < 0)
return 1;
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff