PCIe AER: prevent AER injection if hardware masks error reporting

The Correcteable/Uncorrectable Error Mask Registers are used by PCIe AER
driver which will controls the reporting of individual errors to PCIe RC
via PCIe error messages.

If hardware masks special error reporting to RC, the aer_inject driver
should not inject aer error.

Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Youquan, Song <youquan.song@intel.com>
Acked-by: Ying, Huang <ying.huang@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c
index dd7155a..8c30a95 100644 (file)
--- a/drivers/pci/pcie/aer/aer_inject.c
+++ b/drivers/pci/pcie/aer/aer_inject.c
@@ -321,7 +321,7 @@ static int aer_inject(struct aer_error_inj *einj)
        unsigned long flags;
        unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn);
        int pos_cap_err, rp_pos_cap_err;
-       u32 sever;
+       u32 sever, mask;
        int ret = 0;
 
        dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn);
@@ -374,6 +374,24 @@ static int aer_inject(struct aer_error_inj *einj)
        err->header_log2 = einj->header_log2;
        err->header_log3 = einj->header_log3;
 
+       pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &mask);
+       if (einj->cor_status && !(einj->cor_status & ~mask)) {
+               ret = -EINVAL;
+               printk(KERN_WARNING "The correctable error(s) is masked "
+                               "by device\n");
+               spin_unlock_irqrestore(&inject_lock, flags);
+               goto out_put;
+       }
+
+       pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, &mask);
+       if (einj->uncor_status && !(einj->uncor_status & ~mask)) {
+               ret = -EINVAL;
+               printk(KERN_WARNING "The uncorrectable error(s) is masked "
+                               "by device\n");
+               spin_unlock_irqrestore(&inject_lock, flags);
+               goto out_put;
+       }
+
        rperr = __find_aer_error_by_dev(rpdev);
        if (!rperr) {
                rperr = rperr_alloc;