return; /* we have the memory */
if (can_use_virtual_dma != 2)
return; /* no fallback allowed */
- printk("DMA memory shortage. Temporarily falling back on virtual DMA\n");
+ pr_info("DMA memory shortage. Temporarily falling back on virtual DMA\n");
*addr = (char *)nodma_mem_alloc(l);
#else
return;
#define UTESTF(x) test_bit(x##_BIT, &UDRS->flags)
#define DPRINT(format, args...) \
- printk(DEVICE_NAME "%d: " format, current_drive, ##args)
+ pr_info(DEVICE_NAME "%d: " format, current_drive, ##args)
#define PH_HEAD(floppy, head) (((((floppy)->stretch & 2) >> 1) ^ head) << 2)
#define STRETCH(floppy) ((floppy)->stretch & FD_STRETCH)
static inline void debugt(const char *message)
{
if (DP->flags & DEBUGT)
- printk("%s dtime=%lu\n", message, jiffies - debugtimer);
+ pr_info("%s dtime=%lu\n", message, jiffies - debugtimer);
}
#else
static inline void set_debugt(void) { }
fd_timeout.expires = jiffies + UDP->timeout;
add_timer(&fd_timeout);
if (UDP->flags & FD_DEBUG) {
- DPRINT("reschedule timeout ");
- printk(message, marg);
- printk("\n");
+ DPRINT("reschedule timeout %s %d\n", message, marg);
}
timeout_message = message;
}
current_drive = drive;
}
if (fdc != 1 && fdc != 0) {
- printk("bad fdc value\n");
+ pr_info("bad fdc value\n");
return;
}
set_dor(fdc, ~0, 8);
static int _lock_fdc(int drive, int interruptible, int line)
{
if (!usage_count) {
- printk(KERN_ERR
- "Trying to lock fdc while usage count=0 at line %d\n",
+ pr_err("Trying to lock fdc while usage count=0 at line %d\n",
line);
return -1;
}
if (raw_cmd->length == 0) {
int i;
- printk("zero dma transfer size:");
+ pr_info("zero dma transfer size:");
for (i = 0; i < raw_cmd->cmd_count; i++)
- printk("%x,", raw_cmd->cmd[i]);
- printk("\n");
+ pr_cont("%x,", raw_cmd->cmd[i]);
+ pr_cont("\n");
cont->done(0);
FDCS->reset = 1;
return;
}
if (((unsigned long)raw_cmd->kernel_data) % 512) {
- printk("non aligned address: %p\n", raw_cmd->kernel_data);
+ pr_info("non aligned address: %p\n", raw_cmd->kernel_data);
cont->done(0);
FDCS->reset = 1;
return;
static void tell_sector(void)
{
- printk(": track %d, head %d, sector %d, size %d",
- R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
+ pr_cont(": track %d, head %d, sector %d, size %d",
+ R_TRACK, R_HEAD, R_SECTOR, R_SIZECODE);
} /* tell_sector */
+static void print_errors(void)
+{
+ DPRINT("");
+ if (ST0 & ST0_ECE) {
+ pr_cont("Recalibrate failed!");
+ } else if (ST2 & ST2_CRC) {
+ pr_cont("data CRC error");
+ tell_sector();
+ } else if (ST1 & ST1_CRC) {
+ pr_cont("CRC error");
+ tell_sector();
+ } else if ((ST1 & (ST1_MAM | ST1_ND)) ||
+ (ST2 & ST2_MAM)) {
+ if (!probing) {
+ pr_cont("sector not found");
+ tell_sector();
+ } else
+ pr_cont("probe failed...");
+ } else if (ST2 & ST2_WC) { /* seek error */
+ pr_cont("wrong cylinder");
+ } else if (ST2 & ST2_BC) { /* cylinder marked as bad */
+ pr_cont("bad cylinder");
+ } else {
+ pr_cont("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
+ ST0, ST1, ST2);
+ tell_sector();
+ }
+ pr_cont("\n");
+}
+
/*
* OK, this error interpreting routine is called after a
* DMA read/write has succeeded
DPRINT("Over/Underrun - retrying\n");
bad = 0;
} else if (*errors >= DP->max_errors.reporting) {
- DPRINT("");
- if (ST0 & ST0_ECE) {
- printk("Recalibrate failed!");
- } else if (ST2 & ST2_CRC) {
- printk("data CRC error");
- tell_sector();
- } else if (ST1 & ST1_CRC) {
- printk("CRC error");
- tell_sector();
- } else if ((ST1 & (ST1_MAM | ST1_ND))
- || (ST2 & ST2_MAM)) {
- if (!probing) {
- printk("sector not found");
- tell_sector();
- } else
- printk("probe failed...");
- } else if (ST2 & ST2_WC) { /* seek error */
- printk("wrong cylinder");
- } else if (ST2 & ST2_BC) { /* cylinder marked as bad */
- printk("bad cylinder");
- } else {
- printk
- ("unknown error. ST[0..2] are: 0x%x 0x%x 0x%x",
- ST0, ST1, ST2);
- tell_sector();
- }
- printk("\n");
+ print_errors();
}
if (ST2 & ST2_WC || ST2 & ST2_BC)
/* wrong cylinder => recal */
if (DRS->track >= 0 && DRS->track != ST1 && !blind_seek) {
#ifdef DCL_DEBUG
if (DP->flags & FD_DEBUG) {
- DPRINT
- ("clearing NEWCHANGE flag because of effective seek\n");
+ DPRINT("clearing NEWCHANGE flag because of effective seek\n");
DPRINT("jiffies=%lu\n", jiffies);
}
#endif
* be already at track 0.) Clear the
* new change flag */
#ifdef DCL_DEBUG
- if (DP->flags & FD_DEBUG) {
- DPRINT
- ("clearing NEWCHANGE flag because of second recalibrate\n");
- }
+ if (DP->flags & FD_DEBUG)
+ DPRINT("clearing NEWCHANGE flag because of second recalibrate\n");
#endif
CLEARF(FD_DISK_NEWCHANGE);
DPRINT("%s ", message);
if (inr >= 0)
for (i = 0; i < inr; i++)
- printk("repl[%d]=%x ", i, reply_buffer[i]);
- printk("\n");
+ pr_cont("repl[%d]=%x ", i, reply_buffer[i]);
+ pr_cont("\n");
}
/* interrupt handler. Note that this can be called externally on the Sparc */
do_floppy = NULL;
if (fdc >= N_FDC || FDCS->address == -1) {
/* we don't even know which FDC is the culprit */
- printk("DOR0=%x\n", fdc_state[0].dor);
- printk("floppy interrupt on bizarre fdc %d\n", fdc);
- printk("handler=%p\n", handler);
+ pr_info("DOR0=%x\n", fdc_state[0].dor);
+ pr_info("floppy interrupt on bizarre fdc %d\n", fdc);
+ pr_info("handler=%p\n", handler);
is_alive("bizarre fdc");
return IRQ_NONE;
}
debugt("reset interrupt:");
result(); /* get the status ready for set_fdc */
if (FDCS->reset) {
- printk("reset set in interrupt, calling %p\n", cont->error);
+ pr_info("reset set in interrupt, calling %p\n", cont->error);
cont->error(); /* a reset just after a reset. BAD! */
}
cont->redo();
{
int i;
- printk("\n");
- printk("floppy driver state\n");
- printk("-------------------\n");
- printk("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
- jiffies, interruptjiffies, jiffies - interruptjiffies,
- lasthandler);
+ pr_info("\n");
+ pr_info("floppy driver state\n");
+ pr_info("-------------------\n");
+ pr_info("now=%lu last interrupt=%lu diff=%lu last called handler=%p\n",
+ jiffies, interruptjiffies, jiffies - interruptjiffies,
+ lasthandler);
#ifdef FLOPPY_SANITY_CHECK
- printk("timeout_message=%s\n", timeout_message);
- printk("last output bytes:\n");
+ pr_info("timeout_message=%s\n", timeout_message);
+ pr_info("last output bytes:\n");
for (i = 0; i < OLOGSIZE; i++)
- printk("%2x %2x %lu\n",
- output_log[(i + output_log_pos) % OLOGSIZE].data,
- output_log[(i + output_log_pos) % OLOGSIZE].status,
- output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
- printk("last result at %lu\n", resultjiffies);
- printk("last redo_fd_request at %lu\n", lastredo);
- for (i = 0; i < resultsize; i++) {
- printk("%2x ", reply_buffer[i]);
- }
- printk("\n");
+ pr_info("%2x %2x %lu\n",
+ output_log[(i + output_log_pos) % OLOGSIZE].data,
+ output_log[(i + output_log_pos) % OLOGSIZE].status,
+ output_log[(i + output_log_pos) % OLOGSIZE].jiffies);
+ pr_info("last result at %lu\n", resultjiffies);
+ pr_info("last redo_fd_request at %lu\n", lastredo);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
+ reply_buffer, resultsize, true);
#endif
- printk("status=%x\n", fd_inb(FD_STATUS));
- printk("fdc_busy=%lu\n", fdc_busy);
+ pr_info("status=%x\n", fd_inb(FD_STATUS));
+ pr_info("fdc_busy=%lu\n", fdc_busy);
if (do_floppy)
- printk("do_floppy=%p\n", do_floppy);
+ pr_info("do_floppy=%p\n", do_floppy);
if (work_pending(&floppy_work))
- printk("floppy_work.func=%p\n", floppy_work.func);
+ pr_info("floppy_work.func=%p\n", floppy_work.func);
if (timer_pending(&fd_timer))
- printk("fd_timer.function=%p\n", fd_timer.function);
+ pr_info("fd_timer.function=%p\n", fd_timer.function);
if (timer_pending(&fd_timeout)) {
- printk("timer_function=%p\n", fd_timeout.function);
- printk("expires=%lu\n", fd_timeout.expires - jiffies);
- printk("now=%lu\n", jiffies);
- }
- printk("cont=%p\n", cont);
- printk("current_req=%p\n", current_req);
- printk("command_status=%d\n", command_status);
- printk("\n");
+ pr_info("timer_function=%p\n", fd_timeout.function);
+ pr_info("expires=%lu\n", fd_timeout.expires - jiffies);
+ pr_info("now=%lu\n", jiffies);
+ }
+ pr_info("cont=%p\n", cont);
+ pr_info("current_req=%p\n", current_req);
+ pr_info("command_status=%d\n", command_status);
+ pr_info("\n");
}
static void floppy_shutdown(unsigned long data)
cont->done(0);
cont->redo(); /* this will recall reset when needed */
} else {
- printk("no cont in shutdown!\n");
+ pr_info("no cont in shutdown!\n");
process_fd_request();
}
is_alive("floppy shutdown");
int block;
probing = 0;
- reschedule_timeout(MAXTIMEOUT, "request done %d", uptodate);
+ reschedule_timeout(MAXTIMEOUT, "request done", uptodate);
if (!req) {
- printk("floppy.c: no request in request_done\n");
+ pr_info("floppy.c: no request in request_done\n");
return;
}
DIV_ROUND_UP(in_sector_offset + current_count_sectors, ssize)) {
DPRINT("long rw: %x instead of %lx\n",
nr_sectors, current_count_sectors);
- printk("rs=%d s=%d\n", R_SECTOR, SECTOR);
- printk("rh=%d h=%d\n", R_HEAD, HEAD);
- printk("rt=%d t=%d\n", R_TRACK, TRACK);
- printk("heads=%d eoc=%d\n", heads, eoc);
- printk("spt=%d st=%d ss=%d\n", SECT_PER_TRACK,
- fsector_t, ssize);
- printk("in_sector_offset=%d\n", in_sector_offset);
+ pr_info("rs=%d s=%d\n", R_SECTOR, SECTOR);
+ pr_info("rh=%d h=%d\n", R_HEAD, HEAD);
+ pr_info("rt=%d t=%d\n", R_TRACK, TRACK);
+ pr_info("heads=%d eoc=%d\n", heads, eoc);
+ pr_info("spt=%d st=%d ss=%d\n",
+ SECT_PER_TRACK, fsector_t, ssize);
+ pr_info("in_sector_offset=%d\n", in_sector_offset);
}
#endif
#ifdef FLOPPY_SANITY_CHECK
if (remaining > blk_rq_bytes(current_req) && CT(COMMAND) == FD_WRITE) {
DPRINT("in copy buffer\n");
- printk("current_count_sectors=%ld\n", current_count_sectors);
- printk("remaining=%d\n", remaining >> 9);
- printk("current_req->nr_sectors=%u\n",
- blk_rq_sectors(current_req));
- printk("current_req->current_nr_sectors=%u\n",
- blk_rq_cur_sectors(current_req));
- printk("max_sector=%d\n", max_sector);
- printk("ssize=%d\n", ssize);
+ pr_info("current_count_sectors=%ld\n", current_count_sectors);
+ pr_info("remaining=%d\n", remaining >> 9);
+ pr_info("current_req->nr_sectors=%u\n",
+ blk_rq_sectors(current_req));
+ pr_info("current_req->current_nr_sectors=%u\n",
+ blk_rq_cur_sectors(current_req));
+ pr_info("max_sector=%d\n", max_sector);
+ pr_info("ssize=%d\n", ssize);
}
#endif
floppy_track_buffer + (max_buffer_sectors << 10) ||
dma_buffer < floppy_track_buffer) {
DPRINT("buffer overrun in copy buffer %d\n",
- (int)((floppy_track_buffer -
- dma_buffer) >> 9));
- printk("fsector_t=%d buffer_min=%d\n",
- fsector_t, buffer_min);
- printk("current_count_sectors=%ld\n",
- current_count_sectors);
+ (int)((floppy_track_buffer - dma_buffer) >> 9));
+ pr_info("fsector_t=%d buffer_min=%d\n",
+ fsector_t, buffer_min);
+ pr_info("current_count_sectors=%ld\n",
+ current_count_sectors);
if (CT(COMMAND) == FD_READ)
- printk("read\n");
+ pr_info("read\n");
if (CT(COMMAND) == FD_WRITE)
- printk("write\n");
+ pr_info("write\n");
break;
}
if (((unsigned long)buffer) % 512)
end_sector = SECTOR + hard_sectors - 1;
#ifdef FLOPPY_SANITY_CHECK
if (end_sector > SECT_PER_TRACK) {
- printk("too many sectors %d > %d\n",
- end_sector, SECT_PER_TRACK);
+ pr_info("too many sectors %d > %d\n",
+ end_sector, SECT_PER_TRACK);
return;
}
#endif
int ssize;
if (max_buffer_sectors == 0) {
- printk("VFS: Block I/O scheduled on unopened device\n");
+ pr_info("VFS: Block I/O scheduled on unopened device\n");
return 0;
}
DPRINT("fractionary current count b=%lx s=%lx\n",
raw_cmd->length, current_count_sectors);
if (raw_cmd->kernel_data != current_req->buffer)
- printk("addr=%d, length=%ld\n",
- (int)((raw_cmd->kernel_data -
- floppy_track_buffer) >> 9),
- current_count_sectors);
- printk("st=%d ast=%d mse=%d msi=%d\n",
- fsector_t, aligned_sector_t, max_sector, max_size);
- printk("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
- printk("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
- COMMAND, SECTOR, HEAD, TRACK);
- printk("buffer drive=%d\n", buffer_drive);
- printk("buffer track=%d\n", buffer_track);
- printk("buffer_min=%d\n", buffer_min);
- printk("buffer_max=%d\n", buffer_max);
+ pr_info("addr=%d, length=%ld\n",
+ (int)((raw_cmd->kernel_data -
+ floppy_track_buffer) >> 9),
+ current_count_sectors);
+ pr_info("st=%d ast=%d mse=%d msi=%d\n",
+ fsector_t, aligned_sector_t, max_sector, max_size);
+ pr_info("ssize=%x SIZECODE=%d\n", ssize, SIZECODE);
+ pr_info("command=%x SECTOR=%d HEAD=%d, TRACK=%d\n",
+ COMMAND, SECTOR, HEAD, TRACK);
+ pr_info("buffer drive=%d\n", buffer_drive);
+ pr_info("buffer track=%d\n", buffer_track);
+ pr_info("buffer_min=%d\n", buffer_min);
+ pr_info("buffer_max=%d\n", buffer_max);
return 0;
}
raw_cmd->kernel_data + raw_cmd->length >
floppy_track_buffer + (max_buffer_sectors << 10)) {
DPRINT("buffer overrun in schedule dma\n");
- printk("fsector_t=%d buffer_min=%d current_count=%ld\n",
- fsector_t, buffer_min, raw_cmd->length >> 9);
- printk("current_count_sectors=%ld\n",
- current_count_sectors);
+ pr_info("fsector_t=%d buffer_min=%d current_count=%ld\n",
+ fsector_t, buffer_min, raw_cmd->length >> 9);
+ pr_info("current_count_sectors=%ld\n",
+ current_count_sectors);
if (CT(COMMAND) == FD_READ)
- printk("read\n");
+ pr_info("read\n");
if (CT(COMMAND) == FD_WRITE)
- printk("write\n");
+ pr_info("write\n");
return 0;
}
} else if (raw_cmd->length > blk_rq_bytes(current_req) ||
return 0;
} else if (raw_cmd->length < current_count_sectors << 9) {
DPRINT("more sectors than bytes\n");
- printk("bytes=%ld\n", raw_cmd->length >> 9);
- printk("sectors=%ld\n", current_count_sectors);
+ pr_info("bytes=%ld\n", raw_cmd->length >> 9);
+ pr_info("sectors=%ld\n", current_count_sectors);
}
if (raw_cmd->length == 0) {
DPRINT("zero dma transfer attempted from make_raw_request\n");
static void do_fd_request(struct request_queue * q)
{
if (max_buffer_sectors == 0) {
- printk("VFS: do_fd_request called on non-open device\n");
+ pr_info("VFS: do_fd_request called on non-open device\n");
return;
}
if (usage_count == 0) {
- printk("warning: usage count=0, current_req=%p exiting\n",
- current_req);
- printk("sect=%ld type=%x flags=%x\n",
- (long)blk_rq_pos(current_req), current_req->cmd_type,
- current_req->cmd_flags);
+ pr_info("warning: usage count=0, current_req=%p exiting\n",
+ current_req);
+ pr_info("sect=%ld type=%x flags=%x\n",
+ (long)blk_rq_pos(current_req), current_req->cmd_type,
+ current_req->cmd_flags);
return;
}
if (test_bit(0, &fdc_busy)) {
static void reset_intr(void)
{
- printk("weird, reset interrupt called\n");
+ pr_info("weird, reset interrupt called\n");
}
static struct cont_t reset_cont = {
*size = _IOC_SIZE(*cmd);
*cmd = ioctl_table[i];
if (*size > _IOC_SIZE(*cmd)) {
- printk("ioctl not yet supported\n");
+ pr_info("ioctl not yet supported\n");
return -EFAULT;
}
return 0;
static void __init config_types(void)
{
- int first = 1;
+ bool has_drive = false;
int drive;
/* read drive info out of physical CMOS */
name = temparea;
}
if (name) {
- const char *prepend = ",";
- if (first) {
- prepend = KERN_INFO "Floppy drive(s):";
- first = 0;
+ const char *prepend;
+ if (!has_drive) {
+ prepend = "";
+ has_drive = true;
+ pr_info("Floppy drive(s):");
+ } else {
+ prepend = ",";
}
- printk("%s fd%d is %s", prepend, drive, name);
+
+ pr_cont("%s fd%d is %s", prepend, drive, name);
}
*UDP = *params;
}
- if (!first)
- printk("\n");
+
+ if (has_drive)
+ pr_cont("\n");
}
static int floppy_release(struct gendisk *disk, fmode_t mode)
if (UTESTF(FD_DISK_CHANGED) ||
UTESTF(FD_VERIFY) || test_bit(drive, &fake_change) || NO_GEOM) {
if (usage_count == 0) {
- printk("VFS: revalidate called on non-open device.\n");
+ pr_info("VFS: revalidate called on non-open device.\n");
return -EFAULT;
}
lock_fdc(drive, 0);
if ((r = result()) <= 0x00)
return FDC_NONE; /* No FDC present ??? */
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- printk(KERN_INFO "FDC %d is an 8272A\n", fdc);
+ pr_info("FDC %d is an 8272A\n", fdc);
return FDC_8272A; /* 8272a/765 don't know DUMPREGS */
}
if (r != 10) {
- printk
- ("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: DUMPREGS: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
if (!fdc_configure()) {
- printk(KERN_INFO "FDC %d is an 82072\n", fdc);
+ pr_info("FDC %d is an 82072\n", fdc);
return FDC_82072; /* 82072 doesn't know CONFIGURE */
}
if (need_more_output() == MORE_OUTPUT) {
output_byte(0);
} else {
- printk(KERN_INFO "FDC %d is an 82072A\n", fdc);
+ pr_info("FDC %d is an 82072A\n", fdc);
return FDC_82072A; /* 82072A as found on Sparcs. */
}
output_byte(FD_UNLOCK);
r = result();
if ((r == 1) && (reply_buffer[0] == 0x80)) {
- printk(KERN_INFO "FDC %d is a pre-1991 82077\n", fdc);
+ pr_info("FDC %d is a pre-1991 82077\n", fdc);
return FDC_82077_ORIG; /* Pre-1991 82077, doesn't know
* LOCK/UNLOCK */
}
if ((r != 1) || (reply_buffer[0] != 0x00)) {
- printk("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: UNLOCK: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
output_byte(FD_PARTID);
r = result();
if (r != 1) {
- printk("FDC %d init: PARTID: unexpected return of %d bytes.\n",
- fdc, r);
+ pr_info("FDC %d init: PARTID: unexpected return of %d bytes.\n",
+ fdc, r);
return FDC_UNKNOWN;
}
if (reply_buffer[0] == 0x80) {
- printk(KERN_INFO "FDC %d is a post-1991 82077\n", fdc);
+ pr_info("FDC %d is a post-1991 82077\n", fdc);
return FDC_82077; /* Revised 82077AA passes all the tests */
}
switch (reply_buffer[0] >> 5) {
case 0x0:
/* Either a 82078-1 or a 82078SL running at 5Volt */
- printk(KERN_INFO "FDC %d is an 82078.\n", fdc);
+ pr_info("FDC %d is an 82078.\n", fdc);
return FDC_82078;
case 0x1:
- printk(KERN_INFO "FDC %d is a 44pin 82078\n", fdc);
+ pr_info("FDC %d is a 44pin 82078\n", fdc);
return FDC_82078;
case 0x2:
- printk(KERN_INFO "FDC %d is a S82078B\n", fdc);
+ pr_info("FDC %d is a S82078B\n", fdc);
return FDC_S82078B;
case 0x3:
- printk(KERN_INFO "FDC %d is a National Semiconductor PC87306\n",
- fdc);
+ pr_info("FDC %d is a National Semiconductor PC87306\n", fdc);
return FDC_87306;
default:
- printk(KERN_INFO
- "FDC %d init: 82078 variant with unknown PARTID=%d.\n",
- fdc, reply_buffer[0] >> 5);
+ pr_info("FDC %d init: 82078 variant with unknown PARTID=%d.\n",
+ fdc, reply_buffer[0] >> 5);
return FDC_82078_UNKN;
}
} /* get_fdc_version */
DPRINT("allowed options are:");
for (i = 0; i < ARRAY_SIZE(config_params); i++)
- printk(" %s", config_params[i].name);
- printk("\n");
+ pr_cont(" %s", config_params[i].name);
+ pr_cont("\n");
} else
DPRINT("botched floppy option\n");
DPRINT("Read Documentation/blockdev/floppy.txt\n");
#ifndef __sparc__
for (drive = 0; drive < N_FDC * 4; drive++)
if (timer_pending(motor_off_timer + drive))
- printk("motor off timer %d still active\n", drive);
+ pr_info("motor off timer %d still active\n", drive);
#endif
if (timer_pending(&fd_timeout))
- printk("floppy timer still active:%s\n", timeout_message);
+ pr_info("floppy timer still active:%s\n", timeout_message);
if (timer_pending(&fd_timer))
- printk("auxiliary floppy timer still active\n");
+ pr_info("auxiliary floppy timer still active\n");
if (work_pending(&floppy_work))
- printk("work still pending\n");
+ pr_info("work still pending\n");
#endif
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff