+config MANTIS_CORE
+ tristate "Mantis/Hopper PCI bridge based devices"
+ depends on PCI && I2C
+
+ help
+ Support for PCI cards based on the Mantis and Hopper PCi bridge.
+
+ Say Y if you own such a device and want to use it.
+
config DVB_MANTIS
tristate "MANTIS based cards"
- depends on DVB_CORE && PCI && I2C
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
select DVB_MB86A16
select DVB_CU1216
select DVB_ZL10353
Say Y when you have a Mantis based DVB card and want to use it.
If unsure say N.
+
+config DVB_HOPPER
+ tristate "HOPPER based cards"
+ depends on MANTIS_CORE && DVB_CORE && PCI && I2C
+ select DVB_ZL10353
+ select DVB_PLL
+ help
+ Support for PCI cards based on the Hopper PCI bridge.
+ Say Y when you have a Hopper based DVB card and want to use it.
+
+ If unsure say N
-mantis-objs = mantis_core.o \
- mantis_uart.o \
- mantis_dma.o \
- mantis_pci.o \
- mantis_i2c.o \
- mantis_dvb.o \
- mantis_evm.o \
- mantis_hif.o \
- mantis_ca.o \
- mantis_pcmcia.o \
- mantis_vp1033.o \
- mantis_vp1034.o \
- mantis_vp1041.o \
- mantis_vp2033.o \
- mantis_vp2040.o \
- mantis_vp3028.o \
- mantis_vp3030.o
+mantis_core-objs := mantis_ioc.o \
+ mantis_uart.o \
+ mantis_dma.o \
+ mantis_pci.o \
+ mantis_i2c.o \
+ mantis_dvb.o \
+ mantis_evm.o \
+ mantis_hif.o \
+ mantis_ca.o \
+ mantis_pcmcia.o
-obj-$(CONFIG_DVB_MANTIS) += mantis.o
+mantis-objs := mantis_cards.o \
+ mantis_vp1033.o \
+ mantis_vp1034.o \
+ mantis_vp1041.o \
+ mantis_vp2033.o \
+ mantis_vp2040.o \
+ mantis_vp3030.o
+
+hopper-objs := hopper_cards.o \
+ hopper_vp3028.o
+
+obj-$(CONFIG_MANTIS_CORE) += mantis_core.o
+obj-$(CONFIG_DVB_MANTIS) += mantis.o
+obj-$(CONFIG_DVB_HOPPER) += hopper.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
--- /dev/null
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "hopper_vp3028.h"
+#include "mantis_dma.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+#define DRIVER_NAME "Hopper"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+static int devs;
+
+static irqreturn_t hopper_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof (struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &hopper_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ devs++;
+
+ return err;
+
+fail5:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB exit! <%d>", err);
+ mantis_dvb_exit(mantis);
+
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit hopper_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+// mantis_uart_exit(mantis);
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+
+}
+
+static struct pci_device_id hopper_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config),
+ { }
+};
+
+static struct pci_driver hopper_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = hopper_pci_table,
+ .probe = hopper_pci_probe,
+ .remove = hopper_pci_remove,
+};
+
+static int __devinit hopper_init(void)
+{
+ return pci_register_driver(&hopper_pci_driver);
+}
+
+static void __devexit hopper_exit(void)
+{
+ return pci_unregister_driver(&hopper_pci_driver);
+}
+
+module_init(hopper_init);
+module_exit(hopper_exit);
+
+MODULE_DESCRIPTION("HOPPER driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ Mantis VP-3028 driver
+
+ Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "hopper_vp3028.h"
+
+struct zl10353_config hopper_vp3028_config = {
+ .demod_address = 0x0f,
+};
+
+#define MANTIS_MODEL_NAME "VP-3028"
+#define MANTIS_DEV_TYPE "DVB-T"
+
+static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ mantis_frontend_soft_reset(mantis);
+
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = zl10353_attach(&hopper_vp3028_config, adapter);
+
+ if (!fe)
+ return -1;
+
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3028_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3028_frontend_init,
+ .power = GPIF_A00,
+ .reset = GPIF_A03,
+};
--- /dev/null
+#ifndef __MANTIS_VP3028_H
+#define __MANTIS_VP3028_H
+
+#include "mantis_common.h"
+
+#define MANTIS_VP_3028_DVB_T 0x0028
+
+extern struct mantis_hwconfig vp3028_config;
+
+#endif /* __MANTIS_VP3028_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
#include "mantis_common.h"
#include "mantis_link.h"
#include "mantis_hif.h"
+#include "mantis_reg.h"
+
+#include "mantis_ca.h"
static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr)
{
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot);
if (slot != 0)
return -EINVAL;
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot);
if (slot != 0)
return -EINVAL;
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot);
if (slot != 0)
return -EINVAL;
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot);
if (slot != 0)
return -EINVAL;
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot);
udelay(500); /* Wait.. */
mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */
udelay(500);
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot);
return 0;
}
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
- mantis_set_direction(mantis, 1); /* Enable TS through CAM */
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
+// mantis_set_direction(mantis, 1); /* Enable TS through CAM */
return 0;
}
struct mantis_ca *ca = en50221->data;
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
+ dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot);
if (ca->slot_state == MODULE_INSERTED) {
- dprintk(verbose, MANTIS_DEBUG, 1, "CA Module present and ready");
+ dprintk(MANTIS_DEBUG, 1, "CA Module present and ready");
return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
} else {
- dprintk(verbose, MANTIS_DEBUG, 1, "CA Module not present or not ready");
+ dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready");
}
return 0;
int mantis_ca_init(struct mantis_pci *mantis)
{
- struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter;
+ struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter;
struct mantis_ca *ca;
int ca_flags = 0, result;
- dprintk(verbose, MANTIS_DEBUG, 1, "Initializing Mantis CA");
- if (!(ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL))) {
- dprintk(verbose, MANTIS_ERROR, 1, "Out of memory!, exiting ..");
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA");
+ ca = kzalloc(sizeof (struct mantis_ca), GFP_KERNEL);
+ if (!ca) {
+ dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting ..");
result = -ENOMEM;
goto err;
}
- ca->ca_priv = mantis;
- mantis->mantis_ca = ca;
- ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
+ ca->ca_priv = mantis;
+ mantis->mantis_ca = ca;
+ ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE;
/* register CA interface */
ca->en50221.owner = THIS_MODULE;
ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem;
init_waitqueue_head(&ca->hif_opdone_wq);
init_waitqueue_head(&ca->hif_write_wq);
- dprintk(verbose, MANTIS_ERROR, 1, "Registering EN50221 device");
- if ((result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1)) != 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "EN50221: Initialization failed");
+ dprintk(MANTIS_ERROR, 1, "Registering EN50221 device");
+ result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1);
+ if (result != 0) {
+ dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result);
goto err;
}
- dprintk(verbose, MANTIS_ERROR, 1, "Registered EN50221 device");
+ dprintk(MANTIS_ERROR, 1, "Registered EN50221 device");
mantis_evmgr_init(ca);
return 0;
err:
kfree(ca);
return result;
}
+EXPORT_SYMBOL_GPL(mantis_ca_init);
void mantis_ca_exit(struct mantis_pci *mantis)
{
struct mantis_ca *ca = mantis->mantis_ca;
- dprintk(verbose, MANTIS_DEBUG, 1, "Mantis CA exit");
+ dprintk(MANTIS_DEBUG, 1, "Mantis CA exit");
mantis_evmgr_exit(ca);
- dprintk(verbose, MANTIS_ERROR, 1, "Unregistering EN50221 device");
- dvb_ca_en50221_release(&ca->en50221);
+ dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device");
+ if (ca)
+ dvb_ca_en50221_release(&ca->en50221);
kfree(ca);
}
+EXPORT_SYMBOL_GPL(mantis_ca_exit);
--- /dev/null
+#ifndef __MANTIS_CA_H
+#define __MANTIS_CA_H
+
+extern int mantis_ca_init(struct mantis_pci *mantis);
+extern void mantis_ca_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_CA_H */
--- /dev/null
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/irq.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+
+#include "mantis_vp1033.h"
+#include "mantis_vp1034.h"
+#include "mantis_vp1041.h"
+#include "mantis_vp2033.h"
+#include "mantis_vp2040.h"
+#include "mantis_vp3030.h"
+
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_dvb.h"
+#include "mantis_uart.h"
+#include "mantis_ioc.h"
+#include "mantis_pci.h"
+#include "mantis_i2c.h"
+#include "mantis_reg.h"
+
+static unsigned int verbose;
+module_param(verbose, int, 0644);
+MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
+
+static int devs;
+
+#define DRIVER_NAME "Mantis"
+
+static char *label[10] = {
+ "DMA",
+ "IRQ-0",
+ "IRQ-1",
+ "OCERR",
+ "PABRT",
+ "RIPRR",
+ "PPERR",
+ "FTRGT",
+ "RISCI",
+ "RACK"
+};
+
+
+static irqreturn_t mantis_irq_handler(int irq, void *dev_id)
+{
+ u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
+ u32 rst_stat = 0, rst_mask = 0;
+
+ struct mantis_pci *mantis;
+ struct mantis_ca *ca;
+
+ mantis = (struct mantis_pci *) dev_id;
+ if (unlikely(mantis == NULL)) {
+ dprintk(MANTIS_ERROR, 1, "Mantis == NULL");
+ return IRQ_NONE;
+ }
+ ca = mantis->mantis_ca;
+
+ stat = mmread(MANTIS_INT_STAT);
+ mask = mmread(MANTIS_INT_MASK);
+ mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
+ if (!(stat & mask))
+ return IRQ_NONE;
+
+ rst_mask = MANTIS_GPIF_WRACK |
+ MANTIS_GPIF_OTHERR |
+ MANTIS_SBUF_WSTO |
+ MANTIS_GPIF_EXTIRQ;
+
+ rst_stat = mmread(MANTIS_GPIF_STATUS);
+ rst_stat &= rst_mask;
+ mmwrite(rst_stat, MANTIS_GPIF_STATUS);
+
+ mantis->mantis_int_stat = stat;
+ mantis->mantis_int_mask = mask;
+ dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask);
+ if (stat & MANTIS_INT_RISCEN) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]);
+ }
+ if (stat & MANTIS_INT_IRQ0) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]);
+ mantis->gpif_status = rst_stat;
+ wake_up(&ca->hif_write_wq);
+ schedule_work(&ca->hif_evm_work);
+ }
+ if (stat & MANTIS_INT_IRQ1) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]);
+ schedule_work(&mantis->uart_work);
+ }
+ if (stat & MANTIS_INT_OCERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]);
+ }
+ if (stat & MANTIS_INT_PABORT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]);
+ }
+ if (stat & MANTIS_INT_RIPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]);
+ }
+ if (stat & MANTIS_INT_PPERR) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]);
+ }
+ if (stat & MANTIS_INT_FTRGT) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]);
+ }
+ if (stat & MANTIS_INT_RISCI) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]);
+ mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
+ tasklet_schedule(&mantis->tasklet);
+ }
+ if (stat & MANTIS_INT_I2CDONE) {
+ dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]);
+ wake_up(&mantis->i2c_wq);
+ }
+ mmwrite(stat, MANTIS_INT_STAT);
+ stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
+ MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
+ MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
+ MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
+ MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
+ MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
+ MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
+ MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
+ MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
+ MANTIS_INT_RISCI);
+
+ if (stat)
+ dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask);
+
+ dprintk(MANTIS_DEBUG, 0, "\n");
+ return IRQ_HANDLED;
+}
+
+static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct mantis_pci *mantis;
+ struct mantis_hwconfig *config;
+ int err = 0;
+
+ mantis = kzalloc(sizeof (struct mantis_pci), GFP_KERNEL);
+ if (mantis == NULL) {
+ printk(KERN_ERR "%s ERROR: Out of memory\n", __func__);
+ err = -ENOMEM;
+ goto fail0;
+ }
+
+ mantis->num = devs;
+ mantis->verbose = verbose;
+ mantis->pdev = pdev;
+ config = (struct mantis_hwconfig *) pci_id->driver_data;
+ config->irq_handler = &mantis_irq_handler;
+ mantis->hwconfig = config;
+
+ err = mantis_pci_init(mantis);
+ if (err) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_stream_control(mantis, STREAM_TO_HIF);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err);
+ goto fail1;
+ }
+
+ err = mantis_i2c_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_get_mac(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err);
+ goto fail2;
+ }
+
+ err = mantis_dma_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err);
+ goto fail3;
+ }
+
+ err = mantis_dvb_init(mantis);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err);
+ goto fail4;
+ }
+ devs++;
+
+ return err;
+
+fail5:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB exit! <%d>", err);
+ mantis_dvb_exit(mantis);
+
+fail4:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err);
+ mantis_dma_exit(mantis);
+
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err);
+ mantis_i2c_exit(mantis);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err);
+ mantis_pci_exit(mantis);
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err);
+ kfree(mantis);
+
+fail0:
+ return err;
+}
+
+static void __devexit mantis_pci_remove(struct pci_dev *pdev)
+{
+ struct mantis_pci *mantis = pci_get_drvdata(pdev);
+
+ if (mantis) {
+ mantis_uart_exit(mantis);
+// mantis_ca_exit(mantis);
+ mantis_dvb_exit(mantis);
+ mantis_dma_exit(mantis);
+ mantis_i2c_exit(mantis);
+ mantis_pci_exit(mantis);
+ kfree(mantis);
+ }
+ return;
+}
+
+static struct pci_device_id mantis_pci_table[] = {
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config),
+ MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config),
+ MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config),
+ MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config),
+ MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config),
+ { }
+};
+
+static struct pci_driver mantis_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = mantis_pci_table,
+ .probe = mantis_pci_probe,
+ .remove = mantis_pci_remove,
+};
+
+static int __devinit mantis_init(void)
+{
+ return pci_register_driver(&mantis_pci_driver);
+}
+
+static void __devexit mantis_exit(void)
+{
+ return pci_unregister_driver(&mantis_pci_driver);
+}
+
+module_init(mantis_init);
+module_exit(mantis_exit);
+
+MODULE_DESCRIPTION("MANTIS driver");
+MODULE_AUTHOR("Manu Abraham");
+MODULE_LICENSE("GPL");
#ifndef __MANTIS_COMMON_H
#define __MANTIS_COMMON_H
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
-#include "dvbdev.h"
-#include "dvb_demux.h"
-#include "dmxdev.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-#include <linux/i2c.h>
-#include "mantis_reg.h"
#include "mantis_uart.h"
#include "mantis_link.h"
#define MANTIS_INFO 2
#define MANTIS_DEBUG 3
-#define dprintk(x, y, z, format, arg...) do { \
+#define dprintk(y, z, format, arg...) do { \
if (z) { \
- if ((x > MANTIS_ERROR) && (x > y)) \
+ if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \
printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
- else if ((x > MANTIS_NOTICE) && (x > y)) \
+ else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \
printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
- else if ((x > MANTIS_INFO) && (x > y)) \
+ else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \
printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
- else if ((x > MANTIS_DEBUG) && (x > y)) \
+ else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \
printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
} else { \
- if (x > y) \
+ if (mantis->verbose > y) \
printk(format , ##arg); \
} \
} while(0)
#define mwrite(dat, addr) writel((dat), addr)
#define mread(addr) readl(addr)
-#define mmwrite(dat, addr) mwrite((dat), (mantis->mantis_mmio + (addr)))
-#define mmread(addr) mread(mantis->mantis_mmio + (addr))
+#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr)))
+#define mmread(addr) mread(mantis->mmio + (addr))
#define mmand(dat, addr) mmwrite((dat) & mmread(addr), addr)
#define mmor(dat, addr) mmwrite((dat) | mmread(addr), addr)
#define mmaor(dat, addr) mmwrite((dat) | ((mask) & mmread(addr)), addr)
#define MANTIS_TS_188 0
#define MANTIS_TS_204 1
+#define TWINHAN_TECHNOLOGIES 0x1822
+#define MANTIS 0x4e35
+
+#define TECHNISAT 0x1ae4
+#define TERRATEC 0x153b
+
+#define MAKE_ENTRY(__subven, __subdev, __configptr) { \
+ .vendor = TWINHAN_TECHNOLOGIES, \
+ .device = MANTIS, \
+ .subvendor = (__subven), \
+ .subdevice = (__subdev), \
+ .driver_data = (unsigned long) (__configptr) \
+}
+
+struct mantis_pci;
+
struct mantis_hwconfig {
char *model_name;
char *dev_type;
enum mantis_baud baud_rate;
enum mantis_parity parity;
u32 bytes;
+
+ irqreturn_t (*irq_handler)(int irq, void *dev_id);
+ int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe);
+
+ u8 power;
+ u8 reset;
};
struct mantis_pci {
struct pci_dev *pdev;
unsigned long mantis_addr;
- volatile void __iomem *mantis_mmio;
+ void __iomem *mmio;
u8 irq;
u8 revision;
#define MANTIS_HIF_STATUS (mantis->gpio_status)
-extern unsigned int verbose;
-extern unsigned int devs;
-extern unsigned int i2c;
-extern int mantis_dvb_init(struct mantis_pci *mantis);
-extern int mantis_frontend_init(struct mantis_pci *mantis);
-extern int mantis_dvb_exit(struct mantis_pci *mantis);
-extern void mantis_dma_xfer(unsigned long data);
-extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
-
-extern void mantis_set_direction(struct mantis_pci *mantis, int direction);
-
-extern int mantis_ca_init(struct mantis_pci *mantis);
-extern void mantis_ca_exit(struct mantis_pci *mantis);
-
-
-#endif //__MANTIS_COMMON_H
+#endif /* __MANTIS_COMMON_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/kernel.h>
#include <asm/page.h>
#include <linux/vmalloc.h>
+#include <linux/pci.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_dma.h"
#define RISC_WRITE (0x01 << 28)
#define RISC_JUMP (0x07 << 28)
int mantis_dma_exit(struct mantis_pci *mantis)
{
if (mantis->buf_cpu) {
- dprintk(verbose, MANTIS_ERROR, 1,
+ dprintk(MANTIS_ERROR, 1,
"DMA=0x%lx cpu=0x%p size=%d",
(unsigned long) mantis->buf_dma,
mantis->buf_cpu,
mantis->buf_cpu = NULL;
}
if (mantis->risc_cpu) {
- dprintk(verbose, MANTIS_ERROR, 1,
+ dprintk(MANTIS_ERROR, 1,
"RISC=0x%lx cpu=0x%p size=%lx",
(unsigned long) mantis->risc_dma,
mantis->risc_cpu,
return 0;
}
+EXPORT_SYMBOL_GPL(mantis_dma_exit);
static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
{
MANTIS_BUF_SIZE,
&mantis->buf_dma);
if (!mantis->buf_cpu) {
- dprintk(verbose, MANTIS_ERROR, 1,
+ dprintk(MANTIS_ERROR, 1,
"DMA buffer allocation failed");
goto err;
}
- dprintk(verbose, MANTIS_ERROR, 1,
+ dprintk(MANTIS_ERROR, 1,
"DMA=0x%lx cpu=0x%p size=%d",
(unsigned long) mantis->buf_dma,
mantis->buf_cpu, MANTIS_BUF_SIZE);
&mantis->risc_dma);
if (!mantis->risc_cpu) {
- dprintk(verbose, MANTIS_ERROR, 1,
+ dprintk(MANTIS_ERROR, 1,
"RISC program allocation failed");
mantis_dma_exit(mantis);
goto err;
}
- dprintk(verbose, MANTIS_ERROR, 1,
+ dprintk(MANTIS_ERROR, 1,
"RISC=0x%lx cpu=0x%p size=%lx",
(unsigned long) mantis->risc_dma,
mantis->risc_cpu, MANTIS_RISC_SIZE);
return 0;
err:
- dprintk(verbose, MANTIS_ERROR, 1, "Out of memory (?) .....");
+ dprintk(MANTIS_ERROR, 1, "Out of memory (?) .....");
return -ENOMEM;
}
mantis->line_count <<= 1;
}
- dprintk(verbose, MANTIS_DEBUG, 1,
- "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]",
+ dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]",
MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count);
if (mantis->line_count > 255) {
- dprintk(verbose, MANTIS_ERROR, 1, "Buffer size error");
+ dprintk(MANTIS_ERROR, 1, "Buffer size error");
return -EINVAL;
}
{
int err = 0;
- dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DMA init");
+ dprintk(MANTIS_DEBUG, 1, "Mantis DMA init");
if (mantis_alloc_buffers(mantis) < 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "Error allocating DMA buffer");
+ dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer");
// Stop RISC Engine
// mmwrite(mmread(MANTIS_DMA_CTL) & ~MANTIS_RISC_EN, MANTIS_DMA_CTL);
goto err;
}
if ((err = mantis_calc_lines(mantis)) < 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "Mantis calc lines failed");
+ dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed");
goto err;
}
err:
return err;
}
+EXPORT_SYMBOL_GPL(mantis_dma_init);
static inline void mantis_risc_program(struct mantis_pci *mantis)
{
u32 buf_pos = 0;
u32 line;
- dprintk(verbose, MANTIS_DEBUG, 1, "Mantis create RISC program");
+ dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program");
RISC_FLUSH();
- dprintk(verbose, MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
+ dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
mantis->line_count, mantis->line_bytes);
for (line = 0; line < mantis->line_count; line++) {
- dprintk(verbose, MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line);
+ dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line);
if (!(buf_pos % MANTIS_BLOCK_BYTES)) {
RISC_INSTR(RISC_WRITE |
RISC_IRQ |
void mantis_dma_start(struct mantis_pci *mantis)
{
- dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Start DMA engine");
+ dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine");
mantis_risc_program(mantis);
mmwrite(mantis->risc_dma, MANTIS_RISC_START);
stat = mmread(MANTIS_INT_STAT);
mask = mmread(MANTIS_INT_MASK);
- dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
+ dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR);
struct mantis_hwconfig *config = mantis->hwconfig;
while (mantis->last_block != mantis->finished_block) {
- dprintk(verbose, MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
+ dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
mantis->last_block, mantis->finished_block);
(config->ts_size ? dvb_dmx_swfilter_204: dvb_dmx_swfilter)
--- /dev/null
+#ifndef __MANTIS_DMA_H
+#define __MANTIS_DMA_H
+
+extern int mantis_dma_init(struct mantis_pci *mantis);
+extern int mantis_dma_exit(struct mantis_pci *mantis);
+extern void mantis_dma_start(struct mantis_pci *mantis);
+extern void mantis_dma_stop(struct mantis_pci *mantis);
+extern void mantis_dma_xfer(unsigned long data);
+
+#endif /* __MANTIS_DMA_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/kernel.h>
#include <linux/bitops.h>
-#include "mantis_common.h"
-#include "mantis_core.h"
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
-#include "mantis_vp1033.h"
-#include "mantis_vp1034.h"
-#include "mantis_vp1041.h"
-#include "mantis_vp2033.h"
-#include "mantis_vp2040.h"
-#include "mantis_vp3030.h"
+#include "dvb_net.h"
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+#include "mantis_common.h"
+#include "mantis_dma.h"
+#include "mantis_ca.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
-/* Tuner power supply control */
-void mantis_fe_powerup(struct mantis_pci *mantis)
-{
- dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Power ON");
- gpio_set_bits(mantis, 0x0c, 1);
- msleep_interruptible(100);
- gpio_set_bits(mantis, 0x0c, 1);
- msleep_interruptible(100);
-}
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-void mantis_fe_powerdown(struct mantis_pci *mantis)
+int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
{
- dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Power OFF");
- gpio_set_bits(mantis, 0x0c, 0);
-}
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ switch (power) {
+ case POWER_ON:
+ dprintk(MANTIS_DEBUG, 1, "Power ON");
+ gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ gpio_set_bits(mantis, config->power, POWER_ON);
+ msleep(100);
+ break;
-static int mantis_fe_reset(struct dvb_frontend *fe)
-{
- struct mantis_pci *mantis = fe->dvb->priv;
+ case POWER_OFF:
+ dprintk(MANTIS_DEBUG, 1, "Power OFF");
+ gpio_set_bits(mantis, config->power, POWER_OFF);
+ msleep(100);
+ break;
- dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Reset");
- gpio_set_bits(mantis, 13, 0);
- msleep_interruptible(100);
- gpio_set_bits(mantis, 13, 0);
- msleep_interruptible(100);
- gpio_set_bits(mantis, 13, 1);
- msleep_interruptible(100);
- gpio_set_bits(mantis, 13, 1);
+ default:
+ dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power);
+ return -1;
+ }
return 0;
}
+EXPORT_SYMBOL_GPL(mantis_frontend_power);
-static int mantis_frontend_reset(struct mantis_pci *mantis)
+void mantis_frontend_soft_reset(struct mantis_pci *mantis)
{
- dprintk(verbose, MANTIS_DEBUG, 1, "Frontend Reset");
- gpio_set_bits(mantis, 13, 0);
- msleep_interruptible(100);
- gpio_set_bits(mantis, 13, 0);
- msleep_interruptible(100);
- gpio_set_bits(mantis, 13, 1);
- msleep_interruptible(100);
- gpio_set_bits(mantis, 13, 1);
+ struct mantis_hwconfig *config = mantis->hwconfig;
+
+ dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 0);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+ gpio_set_bits(mantis, config->reset, 1);
+ msleep(100);
+
+ return;
+}
+EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset);
+
+static int mantis_frontend_shutdown(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis_frontend_soft_reset(mantis);
+ err = mantis_frontend_power(mantis, POWER_OFF);
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err);
+ return 1;
+ }
return 0;
}
struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
struct mantis_pci *mantis = dvbdmx->priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB Start feed");
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed");
if (!dvbdmx->dmx.frontend) {
- dprintk(verbose, MANTIS_DEBUG, 1, "no frontend ?");
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
return -EINVAL;
}
+
mantis->feeds++;
- dprintk(verbose, MANTIS_DEBUG, 1,
- "mantis start feed, feeds=%d",
- mantis->feeds);
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds);
if (mantis->feeds == 1) {
- dprintk(verbose, MANTIS_DEBUG, 1, "mantis start feed & dma");
+ dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma");
printk("mantis start feed & dma\n");
mantis_dma_start(mantis);
}
struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
struct mantis_pci *mantis = dvbdmx->priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB Stop feed");
+ dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed");
if (!dvbdmx->dmx.frontend) {
- dprintk(verbose, MANTIS_DEBUG, 1, "no frontend ?");
+ dprintk(MANTIS_DEBUG, 1, "no frontend ?");
return -EINVAL;
}
+
mantis->feeds--;
if (mantis->feeds == 0) {
- dprintk(verbose, MANTIS_DEBUG, 1, "mantis stop feed and dma");
+ dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma");
printk("mantis stop feed and dma\n");
mantis_dma_stop(mantis);
}
+
return 0;
}
int __devinit mantis_dvb_init(struct mantis_pci *mantis)
{
- int result;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ int result = -1;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter");
+
+ result = dvb_register_adapter(&mantis->dvb_adapter,
+ "Mantis DVB adapter",
+ THIS_MODULE,
+ &mantis->pdev->dev,
+ adapter_nr);
- dprintk(verbose, MANTIS_DEBUG, 1, "dvb_register_adapter");
- if (dvb_register_adapter(&mantis->dvb_adapter,
- "Mantis dvb adapter", THIS_MODULE,
- &mantis->pdev->dev,
- adapter_nr) < 0) {
+ if (result < 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "Error registering adapter");
+ dprintk(MANTIS_ERROR, 1, "Error registering adapter");
return -ENODEV;
}
- mantis->dvb_adapter.priv = mantis;
- mantis->demux.dmx.capabilities = DMX_TS_FILTERING |
+
+ mantis->dvb_adapter.priv = mantis;
+ mantis->demux.dmx.capabilities = DMX_TS_FILTERING |
DMX_SECTION_FILTERING |
DMX_MEMORY_BASED_FILTERING;
- mantis->demux.priv = mantis;
- mantis->demux.filternum = 256;
- mantis->demux.feednum = 256;
- mantis->demux.start_feed = mantis_dvb_start_feed;
- mantis->demux.stop_feed = mantis_dvb_stop_feed;
- mantis->demux.write_to_decoder = NULL;
- dprintk(verbose, MANTIS_DEBUG, 1, "dvb_dmx_init");
- if ((result = dvb_dmx_init(&mantis->demux)) < 0) {
- dprintk(verbose, MANTIS_ERROR, 1,
- "dvb_dmx_init failed, ERROR=%d", result);
+ mantis->demux.priv = mantis;
+ mantis->demux.filternum = 256;
+ mantis->demux.feednum = 256;
+ mantis->demux.start_feed = mantis_dvb_start_feed;
+ mantis->demux.stop_feed = mantis_dvb_stop_feed;
+ mantis->demux.write_to_decoder = NULL;
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init");
+ result = dvb_dmx_init(&mantis->demux);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
goto err0;
}
- mantis->dmxdev.filternum = 256;
- mantis->dmxdev.demux = &mantis->demux.dmx;
- mantis->dmxdev.capabilities = 0;
- dprintk(verbose, MANTIS_DEBUG, 1, "dvb_dmxdev_init");
- if ((result = dvb_dmxdev_init(&mantis->dmxdev,
- &mantis->dvb_adapter)) < 0) {
-
- dprintk(verbose, MANTIS_ERROR, 1,
- "dvb_dmxdev_init failed, ERROR=%d", result);
+
+ mantis->dmxdev.filternum = 256;
+ mantis->dmxdev.demux = &mantis->demux.dmx;
+ mantis->dmxdev.capabilities = 0;
+ dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init");
+
+ result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter);
+ if (result < 0) {
+
+ dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result);
goto err1;
}
- mantis->fe_hw.source = DMX_FRONTEND_0;
- if ((result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx,
- &mantis->fe_hw)) < 0) {
- dprintk(verbose, MANTIS_ERROR, 1,
- "dvb_dmx_init failed, ERROR=%d", result);
+ mantis->fe_hw.source = DMX_FRONTEND_0;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
goto err2;
}
- mantis->fe_mem.source = DMX_MEMORY_FE;
- if ((result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx,
- &mantis->fe_mem)) < 0) {
- dprintk(verbose, MANTIS_ERROR, 1,
- "dvb_dmx_init failed, ERROR=%d", result);
+ mantis->fe_mem.source = DMX_MEMORY_FE;
+ result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx,&mantis->fe_mem);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1,"dvb_dmx_init failed, ERROR=%d", result);
goto err3;
}
- if ((result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx,
- &mantis->fe_hw)) < 0) {
-
- dprintk(verbose, MANTIS_ERROR, 1,
- "dvb_dmx_init failed, ERROR=%d", result);
+ result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result);
goto err4;
}
+
dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx);
tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis);
- mantis_frontend_init(mantis);
- mantis_ca_init(mantis);
+ if (mantis->hwconfig) {
+ result = config->frontend_init(mantis, mantis->fe);
+ if (result < 0) {
+ dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!");
+ goto err5;
+ } else {
+// if (mantis->dvb_adapter == NULL) {
+// dprintk(MANTIS_ERROR, 1, "DVB adapter <NULL>");
+// goto err5;
+// }
+ if (mantis->fe == NULL) {
+ dprintk(MANTIS_ERROR, 1, "FE <NULL>");
+ goto err5;
+ }
+
+ if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed");
+
+ if (mantis->fe->ops.release)
+ mantis->fe->ops.release(mantis->fe);
+
+ mantis->fe = NULL;
+ goto err5;
+ }
+ }
+ }
return 0;
- /* Error conditions .. */
+ /* Error conditions .. */
+err5:
+ tasklet_kill(&mantis->tasklet);
+ dvb_net_release(&mantis->dvbnet);
err4:
mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
err3:
return result;
}
+EXPORT_SYMBOL_GPL(mantis_dvb_init);
-int __devinit mantis_frontend_init(struct mantis_pci *mantis)
+int __devexit mantis_dvb_exit(struct mantis_pci *mantis)
{
- dprintk(verbose, MANTIS_DEBUG, 1, "Mantis frontend Init");
- mantis_fe_powerup(mantis);
- mantis_frontend_reset(mantis);
- dprintk(verbose, MANTIS_DEBUG, 1, "Device ID=%02x", mantis->subsystem_device);
- switch (mantis->subsystem_device) {
- case MANTIS_VP_1033_DVB_S: // VP-1033
- dprintk(verbose, MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
- mantis->fe = stv0299_attach(&lgtdqcs001f_config,
- &mantis->adapter);
-
- if (mantis->fe) {
- mantis->fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
- dprintk(verbose, MANTIS_ERROR, 1,
- "found STV0299 DVB-S frontend @ 0x%02x",
- lgtdqcs001f_config.demod_address);
-
- dprintk(verbose, MANTIS_ERROR, 1,
- "Mantis DVB-S STV0299 frontend attach success");
- }
- break;
- case MANTIS_VP_1034_DVB_S: // VP-1034
- dprintk(verbose, MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
- mantis->fe = mb86a16_attach(&vp1034_config, &mantis->adapter);
- if (mantis->fe) {
- dprintk(verbose, MANTIS_ERROR, 1,
- "found MB86A16 DVB-S/DSS frontend @0x%02x",
- vp1034_config.demod_address);
+ int err;
- }
- break;
- case MANTIS_VP_1041_DVB_S2:
- case TECHNISAT_SKYSTAR_HD2:
- mantis->fe = stb0899_attach(&vp1041_config, &mantis->adapter);
- if (mantis->fe) {
- dprintk(verbose, MANTIS_ERROR, 1,
- "found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
- vp1041_config.demod_address);
-
- if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, &mantis->adapter)) {
- if (!lnbp21_attach(mantis->fe, &mantis->adapter, 0, 0)) {
- printk("%s: No LNBP21 found!\n", __FUNCTION__);
- mantis->fe = NULL;
- }
- } else {
- mantis->fe = NULL;
- }
- }
- break;
- case MANTIS_VP_2033_DVB_C: // VP-2033
- case MANTIS_VP_2040_DVB_C: // VP-2040
- case TERRATEC_CINERGY_C_PCI:
- case TECHNISAT_CABLESTAR_HD2:
- dprintk(verbose, MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
- mantis->fe = tda10021_attach(&philips_cu1216_config,
- &mantis->adapter,
- read_pwm(mantis));
-
- if (mantis->fe) {
- dprintk(verbose, MANTIS_ERROR, 1,
- "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
- philips_cu1216_config.demod_address);
- } else {
- mantis->fe = tda10023_attach(&tda10023_cu1216_config,
- &mantis->adapter,
- read_pwm(mantis));
-
- if (mantis->fe) {
- dprintk(verbose, MANTIS_ERROR, 1,
- "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
- philips_cu1216_config.demod_address);
- }
- }
- if (mantis->fe) {
- mantis->fe->ops.tuner_ops.set_params = philips_cu1216_tuner_set;
- dprintk(verbose, MANTIS_ERROR, 1,
- "Mantis DVB-C Philips CU1216 frontend attach success");
- }
- break;
- default:
- dprintk(verbose, MANTIS_DEBUG, 1, "Unknown frontend:[0x%02x]",
- mantis->sub_device_id);
+ err = mantis_frontend_shutdown(mantis);
+ if (err != 0)
+ dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err);
- return -ENODEV;
- }
- if (mantis->fe == NULL) {
- dprintk(verbose, MANTIS_ERROR, 1, "!!! NO Frontends found !!!");
- return -ENODEV;
- } else {
- if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) {
- dprintk(verbose, MANTIS_ERROR, 1,
- "ERROR: Frontend registration failed");
-
- if (mantis->fe->ops.release)
- mantis->fe->ops.release(mantis->fe);
-
- mantis->fe = NULL;
- return -ENODEV;
- }
- }
-
- return 0;
-}
-
-int __devexit mantis_dvb_exit(struct mantis_pci *mantis)
-{
- mantis_ca_exit(mantis);
+// mantis_ca_exit(mantis);
tasklet_kill(&mantis->tasklet);
dvb_net_release(&mantis->dvbnet);
mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem);
if (mantis->fe)
dvb_unregister_frontend(mantis->fe);
- dprintk(verbose, MANTIS_DEBUG, 1, "dvb_unregister_adapter");
+
+ dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter");
dvb_unregister_adapter(&mantis->dvb_adapter);
return 0;
}
+EXPORT_SYMBOL_GPL(mantis_dvb_exit);
--- /dev/null
+#ifndef __MANTIS_DVB_H
+#define __MANTIS_DVB_H
+
+enum mantis_power {
+ POWER_OFF = 0,
+ POWER_ON = 1
+};
+
+extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power);
+extern void mantis_frontend_soft_reset(struct mantis_pci *mantis);
+
+extern int mantis_dvb_init(struct mantis_pci *mantis);
+extern int mantis_dvb_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_DVB_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/kernel.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
#include "mantis_common.h"
#include "mantis_link.h"
#include "mantis_hif.h"
+#include "mantis_reg.h"
static void mantis_hifevm_work(struct work_struct *work)
{
if (gpif_stat & MANTIS_GPIF_DETSTAT) {
if (gpif_stat & MANTIS_CARD_PLUGIN) {
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num);
mmwrite(0xdada0000, MANTIS_CARD_RESET);
mantis_event_cam_plugin(ca);
dvb_ca_en50221_camchange_irq(&ca->en50221,
}
} else {
if (gpif_stat & MANTIS_CARD_PLUGOUT) {
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num);
mmwrite(0xdada0000, MANTIS_CARD_RESET);
mantis_event_cam_unplug(ca);
dvb_ca_en50221_camchange_irq(&ca->en50221,
}
if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ)
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num);
if (mantis->gpif_status & MANTIS_SBUF_WSTO)
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num);
if (mantis->gpif_status & MANTIS_GPIF_OTHERR)
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num);
if (gpif_stat & MANTIS_SBUF_OVFLW)
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num);
if (gpif_stat & MANTIS_GPIF_BRRDY)
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num);
if (gpif_stat & MANTIS_GPIF_INTSTAT)
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num);
if (gpif_stat & MANTIS_SBUF_EMPTY)
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num);
if (gpif_stat & MANTIS_SBUF_OPDONE) {
- dprintk(verbose, MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num);
ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL;
ca->hif_event = MANTIS_SBUF_OPDONE;
wake_up(&ca->hif_opdone_wq);
{
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
+ dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager");
INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work);
mantis_pcmcia_init(ca);
schedule_work(&ca->hif_evm_work);
{
struct mantis_pci *mantis = ca->ca_priv;
- dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
+ dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
flush_scheduled_work();
mantis_hif_exit(ca);
mantis_pcmcia_exit(ca);
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
#include "mantis_common.h"
+
#include "mantis_hif.h"
#include "mantis_link.h" /* temporary due to physical layer stuff */
+#include "mantis_reg.h"
+
static int mantis_hif_data_available(struct mantis_ca *ca)
{
struct mantis_pci *mantis = ca->ca_priv;
ca->sbuf_status & MANTIS_SBUF_DATA_AVAIL,
msecs_to_jiffies(500)) == -ERESTARTSYS) {
- dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Read wait event timeout !", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Read wait event timeout !", mantis->num);
rc = -EREMOTEIO;
}
ca->sbuf_status &= ~MANTIS_SBUF_DATA_AVAIL;
ca->hif_event & MANTIS_SBUF_OPDONE,
msecs_to_jiffies(500)) == -ERESTARTSYS) {
- dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num);
rc = -EREMOTEIO;
}
- dprintk(verbose, MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
+ dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete");
ca->hif_event &= ~MANTIS_SBUF_OPDONE;
return rc;
}
mantis->gpif_status & MANTIS_GPIF_WRACK,
msecs_to_jiffies(500)) == -ERESTARTSYS) {
- dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num);
rc = -EREMOTEIO;
}
- dprintk(verbose, MANTIS_DEBUG, 1, "Write Acknowledged");
+ dprintk(MANTIS_DEBUG, 1, "Write Acknowledged");
mantis->gpif_status &= ~MANTIS_GPIF_WRACK;
while (!opdone) {
opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE);
udelay(500);
timeout++;
if (timeout > 100) {
- dprintk(verbose, MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num);
rc = -ETIMEDOUT;
break;
}
}
- dprintk(verbose, MANTIS_DEBUG, 1, "HIF Write success");
+ dprintk(MANTIS_DEBUG, 1, "HIF Write success");
return rc;
}
struct mantis_pci *mantis = ca->ca_priv;
u32 hif_addr = 0, data, count = 4;
- dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num);
mutex_lock(&ca->ca_lock);
hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
hif_addr &= ~MANTIS_GPIF_PCMCIAIOM;
mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num);
mutex_unlock(&ca->ca_lock);
return -EREMOTEIO;
}
data = mmread(MANTIS_GPIF_DIN);
mutex_unlock(&ca->ca_lock);
- dprintk(verbose, MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
+ dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data);
return (data >> 24) & 0xff;
}
struct mantis_pci *mantis = ca->ca_priv;
u32 hif_addr = 0;
- dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num);
mutex_lock(&ca->ca_lock);
hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
mmwrite(data, MANTIS_GPIF_DOUT);
if (mantis_hif_write_wait(ca) != 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
mutex_unlock(&ca->ca_lock);
return -EREMOTEIO;
}
- dprintk(verbose, MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
+ dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr);
mutex_unlock(&ca->ca_lock);
return 0;
struct mantis_pci *mantis = ca->ca_priv;
u32 data, hif_addr = 0;
- dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num);
mutex_lock(&ca->ca_lock);
hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
hif_addr |= MANTIS_GPIF_PCMCIAIOM;
mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR);
if (mantis_hif_sbuf_opdone_wait(ca) != 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
mutex_unlock(&ca->ca_lock);
return -EREMOTEIO;
}
data = mmread(MANTIS_GPIF_DIN);
- dprintk(verbose, MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
+ dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data);
udelay(50);
mutex_unlock(&ca->ca_lock);
struct mantis_pci *mantis = ca->ca_priv;
u32 hif_addr = 0;
- dprintk(verbose, MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num);
mutex_lock(&ca->ca_lock);
hif_addr &= ~MANTIS_GPIF_PCMCIAREG;
hif_addr &= ~MANTIS_GPIF_HIFRDWRN;
mmwrite(data, MANTIS_GPIF_DOUT);
if (mantis_hif_write_wait(ca) != 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num);
mutex_unlock(&ca->ca_lock);
return -EREMOTEIO;
}
- dprintk(verbose, MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
+ dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr);
mutex_unlock(&ca->ca_lock);
udelay(50);
u32 irqcfg;
slot[0].slave_cfg = 0x70773028;
- dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num);
mutex_lock(&ca->ca_lock);
irqcfg = mmread(MANTIS_GPIF_IRQCFG);
struct mantis_pci *mantis = ca->ca_priv;
u32 irqcfg;
- dprintk(verbose, MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
+ dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num);
mutex_lock(&ca->ca_lock);
irqcfg = mmread(MANTIS_GPIF_IRQCFG);
irqcfg &= ~MANTIS_MASK_BRRDY;
#define MANTIS_HIF_IOMRD 3
#define MANTIS_HIF_IOMWR 4
-#endif // __MANTIS_HIF_H
+#endif /* __MANTIS_HIF_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/delay.h>
#include <asm/io.h>
#include <linux/ioport.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_i2c.h"
#define I2C_HW_B_MANTIS 0x1c
int rc = 0;
u32 timeout = 0;
- if (wait_event_interruptible_timeout(mantis->i2c_wq,
- mantis->mantis_int_stat & MANTIS_INT_I2CDONE,
- msecs_to_jiffies(50)) == -ERESTARTSYS) {
+ if (wait_event_timeout(mantis->i2c_wq,
+ mantis->mantis_int_stat & MANTIS_INT_I2CDONE,
+ msecs_to_jiffies(50)) == -ERESTARTSYS) {
- dprintk(verbose, MANTIS_DEBUG, 1, "Master !I2CDONE");
+ dprintk(MANTIS_DEBUG, 1, "Master !I2CDONE");
rc = -EREMOTEIO;
}
+
while (!(mantis->mantis_int_stat & MANTIS_INT_I2CRACK)) {
- dprintk(verbose, MANTIS_DEBUG, 1, "Waiting for Slave RACK");
+ dprintk(MANTIS_DEBUG, 1, "Waiting for Slave RACK");
mantis->mantis_int_stat = mmread(MANTIS_INT_STAT);
msleep(5);
timeout++;
if (timeout > 500) {
- dprintk(verbose, MANTIS_ERROR, 1, "Slave RACK Fail !");
+ dprintk(MANTIS_ERROR, 1, "Slave RACK Fail !");
rc = -EREMOTEIO;
break;
}
{
u32 rxd, i;
- dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ",
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ",
__func__, msg->addr);
for (i = 0; i < msg->len; i++) {
mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
mmwrite(rxd, MANTIS_I2CDATA_CTL);
if (mantis_ack_wait(mantis) != 0) {
- dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed<R>");
+ dprintk(MANTIS_DEBUG, 1, "ACK failed<R>");
return -EREMOTEIO;
}
rxd = mmread(MANTIS_I2CDATA_CTL);
msg->buf[i] = (u8)((rxd >> 8) & 0xFF);
- dprintk(verbose, MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
}
- dprintk(verbose, MANTIS_INFO, 0, "]\n");
+ dprintk(MANTIS_INFO, 0, "]\n");
return 0;
}
int i;
u32 txd = 0;
- dprintk(verbose, MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ",
+ dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ",
__func__, msg->addr);
for (i = 0; i < msg->len; i++) {
- dprintk(verbose, MANTIS_INFO, 0, "%02x ", msg->buf[i]);
+ dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]);
txd = (msg->addr << 25) | (msg->buf[i] << 8)
| MANTIS_I2C_RATE_3
| MANTIS_I2C_STOP
mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT);
mmwrite(txd, MANTIS_I2CDATA_CTL);
if (mantis_ack_wait(mantis) != 0) {
- dprintk(verbose, MANTIS_DEBUG, 1, "ACK failed<W>");
+ dprintk(MANTIS_DEBUG, 1, "ACK failed<W>");
return -EREMOTEIO;
}
}
- dprintk(verbose, MANTIS_INFO, 0, "]\n");
+ dprintk(MANTIS_INFO, 0, "]\n");
return 0;
}
.functionality = mantis_i2c_func,
};
-static struct i2c_adapter mantis_i2c_adapter = {
- .owner = THIS_MODULE,
- .name = "Mantis I2C",
- .id = I2C_HW_B_MANTIS,
- .class = I2C_CLASS_TV_DIGITAL,
- .algo = &mantis_algo,
-};
-
int __devinit mantis_i2c_init(struct mantis_pci *mantis)
{
u32 intstat, intmask;
struct i2c_adapter *i2c_adapter = &mantis->adapter;
struct pci_dev *pdev = mantis->pdev;
+ init_waitqueue_head(&mantis->i2c_wq);
mutex_init(&mantis->i2c_lock);
- memcpy(i2c_adapter, &mantis_i2c_adapter, sizeof (mantis_i2c_adapter));
+ strncpy(i2c_adapter->name, "Mantis I2C", sizeof (i2c_adapter->name));
i2c_set_adapdata(i2c_adapter, mantis);
- i2c_adapter->dev.parent = &pdev->dev;
+ i2c_adapter->owner = THIS_MODULE;
+ i2c_adapter->class = I2C_CLASS_TV_DIGITAL;
+ i2c_adapter->algo = &mantis_algo;
+ i2c_adapter->algo_data = NULL;
+ i2c_adapter->id = I2C_HW_B_MANTIS;
+ i2c_adapter->timeout = 500;
+ i2c_adapter->retries = 3;
+ i2c_adapter->dev.parent = &pdev->dev;
+
mantis->i2c_rc = i2c_add_adapter(i2c_adapter);
if (mantis->i2c_rc < 0)
return mantis->i2c_rc;
- dprintk(verbose, MANTIS_DEBUG, 1, "Initializing I2C ..");
+ dprintk(MANTIS_DEBUG, 1, "Initializing I2C ..");
intstat = mmread(MANTIS_INT_STAT);
intmask = mmread(MANTIS_INT_MASK);
mmwrite(intstat, MANTIS_INT_STAT);
mmwrite(intmask | MANTIS_INT_I2CDONE, MANTIS_INT_MASK);
- dprintk(verbose, MANTIS_DEBUG, 1, "[0x%08x/%08x]", intstat, intmask);
+ dprintk(MANTIS_DEBUG, 1, "Status=<%02x> Mask=<%02x>", intstat, intmask);
return 0;
}
+EXPORT_SYMBOL_GPL(mantis_i2c_init);
int __devexit mantis_i2c_exit(struct mantis_pci *mantis)
{
- dprintk(verbose, MANTIS_DEBUG, 1, "Removing I2C adapter");
+ dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter");
return i2c_del_adapter(&mantis->adapter);
}
+EXPORT_SYMBOL_GPL(mantis_i2c_exit);
--- /dev/null
+#ifndef __MANTIS_I2C_H
+#define __MANTIS_I2C_H
+
+extern int mantis_i2c_init(struct mantis_pci *mantis);
+extern int mantis_i2c_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_I2C_H */
--- /dev/null
+/*
+ Mantis PCI bridge driver
+
+ Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_ioc.h"
+
+static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err;
+ struct i2c_msg msg[] = {
+ { .addr = 0x50, .flags = 0, .buf = data, .len = 1 },
+ { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length },
+ };
+
+ err = i2c_transfer(adapter, msg, 2);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
+ err, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+ int err;
+
+ struct i2c_msg msg = { .addr = 0x50, .flags = 0, .buf = data, .len = length };
+
+ err = i2c_transfer(adapter, &msg, 1);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >",
+ err, length, data[0], data[1]);
+
+ return err;
+ }
+
+ return 0;
+}
+
+int mantis_get_mac(struct mantis_pci *mantis)
+{
+ int err;
+
+ mantis->mac_address[0] = 0x08;
+
+ err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6);
+ if (err < 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err);
+
+ return err;
+ }
+
+ dprintk(MANTIS_ERROR, 0,
+ " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n",
+ mantis->mac_address[0], mantis->mac_address[1],
+ mantis->mac_address[2], mantis->mac_address[3],
+ mantis->mac_address[4], mantis->mac_address[5]);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_get_mac);
+
+/* Turn the given bit on or off. */
+void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+{
+ u32 cur;
+
+ cur = mmread(MANTIS_GPIF_ADDR);
+ if (value)
+ mantis->gpio_status = cur | (1 << bitpos);
+ else
+ mantis->gpio_status = cur & (~(1 << bitpos));
+
+ mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
+ mmwrite(0x00, MANTIS_GPIF_DOUT);
+}
+EXPORT_SYMBOL_GPL(gpio_set_bits);
+
+int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
+{
+ u32 reg;
+
+ reg = mmread(MANTIS_CONTROL);
+ switch (stream_ctl) {
+ case STREAM_TO_HIF:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to HIF");
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+
+ case STREAM_TO_CAM:
+ dprintk(MANTIS_DEBUG, 1, "Set stream to CAM");
+ reg |= MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ reg &= 0xff - MANTIS_BYPASS;
+ mmwrite(reg, MANTIS_CONTROL);
+ break;
+ default:
+ dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl);
+ return -1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mantis_stream_control);
enum mantis_slot_state slot_state;
-// struct dvb_device *ca_dev;
void *ca_priv;
struct dvb_ca_en50221 en50221;
extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr);
extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data);
-#endif // __MANTIS_LINK_H
+#endif /* __MANTIS_LINK_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/device.h>
-#include "mantis_common.h"
-#include "mantis_core.h"
-#include "mantis_uart.h"
+#include <linux/pci.h>
#include <asm/irq.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
-unsigned int verbose = 1;
-module_param(verbose, int, 0644);
-MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)");
-
-unsigned int devs;
-
-#define PCI_VENDOR_ID_MANTIS 0x1822
-#define PCI_DEVICE_ID_MANTIS_R11 0x4e35
-#define DRIVER_NAME "Mantis"
-
-static struct pci_device_id mantis_pci_table[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_MANTIS, PCI_DEVICE_ID_MANTIS_R11) },
- { 0 },
-};
-
-MODULE_DEVICE_TABLE(pci, mantis_pci_table);
-
-static irqreturn_t mantis_pci_irq(int irq, void *dev_id)
-{
- u32 stat = 0, mask = 0, lstat = 0, mstat = 0;
- u32 rst_stat = 0, rst_mask = 0;
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
- struct mantis_pci *mantis;
- struct mantis_ca *ca;
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
- mantis = (struct mantis_pci *) dev_id;
- if (unlikely(mantis == NULL)) {
- dprintk(verbose, MANTIS_ERROR, 1, "Mantis == NULL");
- return IRQ_NONE;
- }
- ca = mantis->mantis_ca;
-
- stat = mmread(MANTIS_INT_STAT);
- mask = mmread(MANTIS_INT_MASK);
- mstat = lstat = stat & ~MANTIS_INT_RISCSTAT;
- if (!(stat & mask))
- return IRQ_NONE;
-
- rst_mask = MANTIS_GPIF_WRACK |
- MANTIS_GPIF_OTHERR |
- MANTIS_SBUF_WSTO |
- MANTIS_GPIF_EXTIRQ;
-
- rst_stat = mmread(MANTIS_GPIF_STATUS);
- rst_stat &= rst_mask;
- mmwrite(rst_stat, MANTIS_GPIF_STATUS);
-
- mantis->mantis_int_stat = stat;
- mantis->mantis_int_mask = mask;
- dprintk(verbose, MANTIS_DEBUG, 0, "=== Interrupts[%04x/%04x]= [", stat, mask);
- if (stat & MANTIS_INT_RISCEN) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* DMA enabl *");
- }
- if (stat & MANTIS_INT_IRQ0) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-0 *");
- mantis->gpif_status = rst_stat;
- wake_up(&ca->hif_write_wq);
- schedule_work(&ca->hif_evm_work);
- }
- if (stat & MANTIS_INT_IRQ1) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* INT IRQ-1 *");
- schedule_work(&mantis->uart_work);
- }
- if (stat & MANTIS_INT_OCERR) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* INT OCERR *");
- }
- if (stat & MANTIS_INT_PABORT) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* INT PABRT *");
- }
- if (stat & MANTIS_INT_RIPERR) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* INT RIPRR *");
- }
- if (stat & MANTIS_INT_PPERR) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* INT PPERR *");
- }
- if (stat & MANTIS_INT_FTRGT) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* INT FTRGT *");
- }
- if (stat & MANTIS_INT_RISCI) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* INT RISCI *");
- mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28;
- tasklet_schedule(&mantis->tasklet);
- }
- if (stat & MANTIS_INT_I2CDONE) {
- dprintk(verbose, MANTIS_DEBUG, 0, "* I2C DONE *");
- wake_up(&mantis->i2c_wq);
- }
- mmwrite(stat, MANTIS_INT_STAT);
- stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE |
- MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 |
- MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 |
- MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 |
- MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 |
- MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 |
- MANTIS_INT_IRQ0 | MANTIS_INT_OCERR |
- MANTIS_INT_PABORT | MANTIS_INT_RIPERR |
- MANTIS_INT_PPERR | MANTIS_INT_FTRGT |
- MANTIS_INT_RISCI);
-
- if (stat)
- dprintk(verbose, MANTIS_DEBUG, 0, "* Unknown [%04x] *", stat);
-
- dprintk(verbose, MANTIS_DEBUG, 0, "] ===\n");
-
- return IRQ_HANDLED;
-}
+#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_pci.h"
+#define DRIVER_NAME "Mantis Core"
-static int __devinit mantis_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *mantis_pci_table)
+int __devinit mantis_pci_init(struct mantis_pci *mantis)
{
u8 revision, latency;
- struct mantis_pci *mantis;
- int ret = 0;
+ struct mantis_hwconfig *config = mantis->hwconfig;
+ struct pci_dev *pdev = mantis->pdev;
+ int err, ret = 0;
+
+ dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n",
+ config->model_name,
+ config->dev_type,
+ mantis->pdev->bus->number,
+ PCI_SLOT(mantis->pdev->devfn),
+ PCI_FUNC(mantis->pdev->devfn));
+
+ err = pci_enable_device(pdev);
+ if (err != 0) {
+ ret = -ENODEV;
+ dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err);
+ goto fail0;
+ }
- mantis = kmalloc(sizeof (struct mantis_pci), GFP_KERNEL);
- if (mantis == NULL) {
- printk("%s: Out of memory\n", __func__);
+ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err != 0) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err);
ret = -ENOMEM;
- goto err;
+ goto fail1;
}
- memset(mantis, 0, sizeof (struct mantis_pci));
- mantis->num = devs;
- devs++;
- if (pci_enable_device(pdev)) {
- dprintk(verbose, MANTIS_ERROR, 1, "Mantis PCI enable failed");
- ret = -ENODEV;
- goto err;
- }
- mantis->mantis_addr = pci_resource_start(pdev, 0);
- if (!request_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0), DRIVER_NAME)) {
- ret = -ENODEV;
- goto err0;
- }
+ pci_set_master(pdev);
- mantis->mantis_mmio = ioremap(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
+ if (!request_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0),
+ DRIVER_NAME)) {
- if (!mantis->mantis_mmio) {
- dprintk(verbose, MANTIS_ERROR, 1, "IO remap failed");
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !");
ret = -ENODEV;
- goto err1;
+ goto fail1;
}
- // Clear and disable all interrupts at startup
- // to avoid lockup situations
- mmwrite(0x00, MANTIS_INT_MASK);
- if (request_irq(pdev->irq,
- mantis_pci_irq,
- IRQF_SHARED,
- DRIVER_NAME,
- mantis) < 0) {
+ mantis->mmio = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
- dprintk(verbose, MANTIS_ERROR, 1, "Mantis IRQ reg failed");
+ if (!mantis->mmio) {
+ dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !");
ret = -ENODEV;
- goto err2;
+ goto fail2;
}
- pci_set_master(pdev);
- pci_set_drvdata(pdev, mantis);
+
pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency);
pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
mantis->latency = latency;
mantis->revision = revision;
- mantis->pdev = pdev;
- mantis->subsystem_vendor = pdev->subsystem_vendor;
- mantis->subsystem_device = pdev->subsystem_device;
- init_waitqueue_head(&mantis->i2c_wq);
- mantis_set_direction(mantis, 0); /* CAM bypass */
+ dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ",
+ mantis->revision,
+ mantis->pdev->subsystem_vendor,
+ mantis->pdev->subsystem_device);
+
+ dprintk(MANTIS_ERROR, 0,
+ "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
+ mantis->pdev->irq,
+ mantis->latency,
+ mantis->mantis_addr,
+ mantis->mmio);
- if (!latency)
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 32);
+ err = request_irq(pdev->irq,
+ config->irq_handler,
+ IRQF_SHARED,
+ DRIVER_NAME,
+ mantis);
- dprintk(verbose, MANTIS_ERROR, 0,
- "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n",
- pdev->irq, mantis->latency,
- mantis->mantis_addr, mantis->mantis_mmio);
+ if (err != 0) {
- // No more PCI specific stuff !
- if (mantis_core_init(mantis) < 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "Mantis core init failed");
+ dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err);
ret = -ENODEV;
- goto err2;
+ goto fail3;
}
- return 0;
+ pci_set_drvdata(pdev, mantis);
+ return ret;
- // Error conditions ..
-err2:
- dprintk(verbose, MANTIS_DEBUG, 1, "Err: IO Unmap");
- if (mantis->mantis_mmio)
- iounmap(mantis->mantis_mmio);
-err1:
- dprintk(verbose, MANTIS_DEBUG, 1, "Err: Release regions");
+ /* Error conditions */
+fail3:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret);
+ if (mantis->mmio)
+ iounmap(mantis->mmio);
+
+fail2:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret);
release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
+ pci_resource_len(pdev, 0));
+
+fail1:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret);
pci_disable_device(pdev);
-err0:
- dprintk(verbose, MANTIS_DEBUG, 1, "Err: Free");
- kfree(mantis);
-err:
- dprintk(verbose, MANTIS_DEBUG, 1, "Err:");
+
+fail0:
+ dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret);
+ pci_set_drvdata(pdev, NULL);
return ret;
}
+EXPORT_SYMBOL_GPL(mantis_pci_init);
-static void __devexit mantis_pci_remove(struct pci_dev *pdev)
+void __devexit mantis_pci_exit(struct mantis_pci *mantis)
{
- struct mantis_pci *mantis = pci_get_drvdata(pdev);
-
- if (mantis == NULL) {
- dprintk(verbose, MANTIS_ERROR, 1, "Aeio, Mantis NULL ptr");
- return;
- }
- mantis_core_exit(mantis);
- dprintk(verbose, MANTIS_ERROR, 1, "Removing -->Mantis irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p",
- pdev->irq, mantis->latency, mantis->mantis_addr,
- mantis->mantis_mmio);
+ struct pci_dev *pdev = mantis->pdev;
+ dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio);
free_irq(pdev->irq, mantis);
- pci_release_regions(pdev);
- if (mantis_dma_exit(mantis) < 0)
- dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed");
+ if (mantis->mmio) {
+ iounmap(mantis->mmio);
+ release_mem_region(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ }
- pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
- kfree(mantis);
-}
-
-static struct pci_driver mantis_pci_driver = {
- .name = DRIVER_NAME,
- .id_table = mantis_pci_table,
- .probe = mantis_pci_probe,
- .remove = mantis_pci_remove,
-};
-
-static int __devinit mantis_pci_init(void)
-{
- return pci_register_driver(&mantis_pci_driver);
-}
-
-static void __devexit mantis_pci_exit(void)
-{
- pci_unregister_driver(&mantis_pci_driver);
+ pci_set_drvdata(pdev, NULL);
}
-
-module_init(mantis_pci_init);
-module_exit(mantis_pci_exit);
+EXPORT_SYMBOL_GPL(mantis_pci_exit);
MODULE_DESCRIPTION("Mantis PCI DTV bridge driver");
MODULE_AUTHOR("Manu Abraham");
--- /dev/null
+#ifndef __MANTIS_PCI_H
+#define __MANTIS_PCI_H
+
+extern int mantis_pci_init(struct mantis_pci *mantis);
+extern void mantis_pci_exit(struct mantis_pci *mantis);
+
+#endif /* __MANTIS_PCI_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/kernel.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
#include "mantis_common.h"
#include "mantis_link.h" /* temporary due to physical layer stuff */
+#include "mantis_reg.h"
/*
* If Slot state is already PLUG_IN event and we are called
u32 gpif_irqcfg;
if (ca->slot_state == MODULE_XTRACTED) {
- dprintk(verbose, MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num);
udelay(50);
mmwrite(0xda000000, MANTIS_CARD_RESET);
gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
u32 gpif_irqcfg;
if (ca->slot_state == MODULE_INSERTED) {
- dprintk(verbose, MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num);
udelay(50);
mmwrite(0x00da0000, MANTIS_CARD_RESET);
gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG);
card_stat = mmread(MANTIS_GPIF_IRQCFG);
if (gpif_stat & MANTIS_GPIF_DETSTAT) {
- dprintk(verbose, MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num);
mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG);
ca->slot_state = MODULE_INSERTED;
dvb_ca_en50221_camchange_irq(&ca->en50221,
0,
DVB_CA_EN50221_CAMCHANGE_INSERTED);
} else {
- dprintk(verbose, MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
+ dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num);
mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG);
ca->slot_state = MODULE_XTRACTED;
dvb_ca_en50221_camchange_irq(&ca->en50221,
#ifndef __MANTIS_REG_H
#define __MANTIS_REG_H
-// Interrupts
+/* Interrupts */
#define MANTIS_INT_STAT 0x00
#define MANTIS_INT_MASK 0x04
#define MANTIS_INT_RISCI (0x01 << 1)
#define MANTIS_INT_I2CDONE (0x01 << 0)
-// DMA
+/* DMA */
#define MANTIS_DMA_CTL 0x08
+#define MANTIS_GPIF_RD (0xff << 24)
+#define MANTIS_GPIF_WR (0xff << 16)
+#define MANTIS_CPU_DO (0x01 << 10)
+#define MANTIS_DRV_DO (0x01 << 9)
#define MANTIS_I2C_RD (0x01 << 7)
#define MANTIS_I2C_WR (0x01 << 6)
#define MANTIS_DCAP_MODE (0x01 << 5)
#define MANTIS_DCAP_EN (0x01 << 1)
#define MANTIS_RISC_EN (0x01 << 0)
+/* DEBUG */
+#define MANTIS_DEBUGREG 0x0c
+#define MANTIS_DATINV (0x0e << 7)
+#define MANTIS_TOP_DEBUGSEL (0x07 << 4)
+#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0)
+
#define MANTIS_RISC_START 0x10
#define MANTIS_RISC_PC 0x14
-// I2C
+/* I2C */
#define MANTIS_I2CDATA_CTL 0x18
#define MANTIS_I2C_RATE_1 (0x00 << 6)
#define MANTIS_I2C_RATE_2 (0x01 << 6)
#define MANTIS_I2C_STOP (0x01 << 5)
#define MANTIS_I2C_PGMODE (0x01 << 3)
+/* DATA */
+#define MANTIS_CMD_DATA_R1 0x20
+#define MANTIS_CMD_DATA_3 (0xff << 24)
+#define MANTIS_CMD_DATA_2 (0xff << 16)
+#define MANTIS_CMD_DATA_1 (0xff << 8)
+#define MANTIS_CMD_DATA_0 (0xff << 0)
+
+#define MANTIS_CMD_DATA_R2 0x24
+#define MANTIS_CMD_DATA_7 (0xff << 24)
+#define MANTIS_CMD_DATA_6 (0xff << 16)
+#define MANTIS_CMD_DATA_5 (0xff << 8)
+#define MANTIS_CMD_DATA_4 (0xff << 0)
+
+#define MANTIS_CONTROL 0x28
+#define MANTIS_DET (0x01 << 7)
+#define MANTIS_DAT_CF_EN (0x01 << 6)
+#define MANTIS_ACS (0x03 << 4)
+#define MANTIS_VCCEN (0x01 << 3)
+#define MANTIS_BYPASS (0x01 << 2)
+#define MANTIS_MRST (0x01 << 1)
+#define MANTIS_CRST_INT (0x01 << 0)
+
#define MANTIS_GPIF_CFGSLA 0x84
#define MANTIS_GPIF_WAITSMPL (0x07 << 28)
#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25)
#define MANTIS_GPIF_LOGICRD (0xffff << 16)
#define MANTIS_GPIF_LOGICRW (0xffff << 0)
-#endif //__MANTIS_REG_H
+#endif /* __MANTIS_REG_H */
+#include <linux/kernel.h>
#include <linux/spinlock.h>
+
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
#include "mantis_common.h"
+#include "mantis_reg.h"
+#include "mantis_uart.h"
struct mantis_uart_params {
enum mantis_baud baud_rate;
for (i = 0; i < (config->bytes + 1); i++) {
if (stat & MANTIS_UART_RXFIFO_FULL) {
- dprintk(verbose, MANTIS_ERROR, 1, "RX Fifo FULL");
+ dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
}
data[i] = mmread(MANTIS_UART_RXD) & 0x3f;
stat = mmread(MANTIS_UART_STAT);
- dprintk(verbose, MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
+ dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f);
if (data[i] & (1 << 7)) {
- dprintk(verbose, MANTIS_ERROR, 1, "UART framing error");
+ dprintk(MANTIS_ERROR, 1, "UART framing error");
return -EINVAL;
}
if (data[i] & (1 << 6)) {
- dprintk(verbose, MANTIS_ERROR, 1, "UART parity error");
+ dprintk(MANTIS_ERROR, 1, "UART parity error");
return -EINVAL;
}
}
u8 buf[16];
int i;
- dprintk(verbose, MANTIS_DEBUG, 1, "UART read");
+ dprintk(MANTIS_DEBUG, 1, "UART read");
mantis_uart_read(mantis, buf);
- dprintk(verbose, MANTIS_DEBUG, 1, "UART: ");
+ dprintk(MANTIS_DEBUG, 1, "UART: ");
for (i = 0; i < (config->bytes + 1); i++)
- dprintk(verbose, MANTIS_DEBUG, 0, "<%02x> ", buf[i]);
+ dprintk(MANTIS_DEBUG, 0, "<%02x> ", buf[i]);
- dprintk(verbose, MANTIS_DEBUG, 0, "\n");
+ dprintk(MANTIS_DEBUG, 0, "\n");
}
static int mantis_uart_setup(struct mantis_pci *mantis,
u32 reg;
- dprintk(verbose, MANTIS_DEBUG, 1, "Set Parity <%s> Baud Rate <%s>",
+ dprintk(MANTIS_DEBUG, 1, "Set Parity <%s> Baud Rate <%s>",
parity[params->parity],
rates[params->baud_rate]);
struct mantis_hwconfig *config = mantis->hwconfig;
struct mantis_uart_params params;
- dprintk(verbose, MANTIS_DEBUG, 1, "Initializing UART ..");
+ dprintk(MANTIS_DEBUG, 1, "Initializing UART ..");
/* default parity: */
params.baud_rate = config->baud_rate;
params.parity = config->parity;
return 0;
}
+EXPORT_SYMBOL_GPL(mantis_uart_init);
void mantis_uart_exit(struct mantis_pci *mantis)
{
/* disable interrupt */
mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
}
+EXPORT_SYMBOL_GPL(mantis_uart_exit);
extern int mantis_uart_init(struct mantis_pci *mantis);
extern void mantis_uart_exit(struct mantis_pci *mantis);
-#endif // __MANTIS_UART_H
+#endif /* __MANTIS_UART_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "stv0299.h"
#include "mantis_common.h"
#include "mantis_vp1033.h"
0xff, 0xff,
};
-struct stv0299_config lgtdqcs001f_config = {
- .demod_address = 0x68,
- .inittab = lgtdqcs001f_inittab,
- .mclk = 88000000UL,
-// .invert = 0,
- .invert = 1,
-// .enhanced_tuning = 0,
- .skip_reinit = 0,
-// .lock_output = STV0229_LOCKOUTPUT_0,
- .volt13_op0_op1 = STV0299_VOLT13_OP0,
- .min_delay_ms = 100,
- .set_symbol_rate = lgtdqcs001f_set_symbol_rate,
-// .pll_set = lgtdqcs001f_pll_set,
-};
-
#define MANTIS_MODEL_NAME "VP-1033"
#define MANTIS_DEV_TYPE "DVB-S/DSS"
-struct mantis_hwconfig vp1033_mantis_config = {
- .model_name = MANTIS_MODEL_NAME,
- .dev_type = MANTIS_DEV_TYPE,
- .ts_size = MANTIS_TS_204,
- .baud_rate = MANTIS_BAUD_9600,
- .parity = MANTIS_PARITY_NONE,
- .bytes = 0,
-};
-
int lgtdqcs001f_tuner_set(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params)
{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
u8 buf[4];
u32 div;
- struct mantis_pci *mantis = fe->dvb->priv;
- struct i2c_msg msg = {
- .addr = 0x61,
- .flags = 0,
- .buf = buf,
- .len = sizeof (buf)
- };
+ struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof (buf) };
+
div = params->frequency / 250;
buf[0] = (div >> 8) & 0x7f;
buf[3] |= 0x04;
else
buf[3] &= ~0x04;
- if (i2c_transfer(&mantis->adapter, &msg, 1) < 0) {
- dprintk(verbose, MANTIS_ERROR, 1, "Write: I2C Transfer failed");
+ if (i2c_transfer(adapter, &msg, 1) < 0) {
+ dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed");
return -EIO;
}
msleep_interruptible(100);
return 0;
}
+
+struct stv0299_config lgtdqcs001f_config = {
+ .demod_address = 0x68,
+ .inittab = lgtdqcs001f_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .volt13_op0_op1 = STV0299_VOLT13_OP0,
+ .min_delay_ms = 100,
+ .set_symbol_rate = lgtdqcs001f_set_symbol_rate,
+};
+
+static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
+ fe = stv0299_attach(&lgtdqcs001f_config, adapter);
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x",
+ lgtdqcs001f_config.demod_address);
+
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success");
+ } else {
+ return -1;
+ }
+
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1033_frontend_init,
+};
#ifndef __MANTIS_VP1033_H
#define __MANTIS_VP1033_H
-#include "dvb_frontend.h"
#include "mantis_common.h"
-#include "stv0299.h"
#define MANTIS_VP_1033_DVB_S 0x0016
-extern struct stv0299_config lgtdqcs001f_config;
-extern struct mantis_hwconfig vp1033_mantis_config;
+extern struct mantis_hwconfig vp1033_config;
-extern int lgtdqcs001f_tuner_set(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *params);
-
-extern int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio);
-
-
-#endif // __MANTIS_VP1033_H
+#endif /* __MANTIS_VP1033_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "mb86a16.h"
#include "mantis_common.h"
+#include "mantis_ioc.h"
#include "mantis_vp1034.h"
+#include "mantis_reg.h"
-struct mb86a16_config vp1034_config = {
+struct mb86a16_config vp1034_mb86a16_config = {
.demod_address = 0x08,
.set_voltage = vp1034_set_voltage,
};
#define MANTIS_MODEL_NAME "VP-1034"
#define MANTIS_DEV_TYPE "DVB-S/DSS"
-struct mantis_hwconfig vp1034_mantis_config = {
- .model_name = MANTIS_MODEL_NAME,
- .dev_type = MANTIS_DEV_TYPE,
- .ts_size = MANTIS_TS_204,
- .baud_rate = MANTIS_BAUD_9600,
- .parity = MANTIS_PARITY_NONE,
- .bytes = 0,
-};
-
int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct mantis_pci *mantis = fe->dvb->priv;
switch (voltage) {
case SEC_VOLTAGE_13:
- dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[13V]");
+ dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
gpio_set_bits(mantis, 13, 1);
gpio_set_bits(mantis, 14, 0);
break;
case SEC_VOLTAGE_18:
- dprintk(verbose, MANTIS_ERROR, 1, "Polarization=[18V]");
+ dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
gpio_set_bits(mantis, 13, 1);
gpio_set_bits(mantis, 14, 1);
break;
case SEC_VOLTAGE_OFF:
- dprintk(verbose, MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
+ dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
break;
default:
- dprintk(verbose, MANTIS_ERROR, 1, "Invalid = (%d)", (u32 ) voltage);
+ dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32 ) voltage);
return -EINVAL;
}
mmwrite(0x00, MANTIS_GPIF_DOUT);
return 0;
}
+
+static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
+ fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found MB86A16 DVB-S/DSS frontend @0x%02x",
+ vp1034_mb86a16_config.demod_address);
+
+ } else {
+ return -1;
+ }
+
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1034_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1034_frontend_init,
+};
#include "dvb_frontend.h"
#include "mantis_common.h"
-#include "mb86a16.h"
#define MANTIS_VP_1034_DVB_S 0x0014
-extern struct mantis_hwconfig vp1034_mantis_config;
-extern struct mb86a16_config vp1034_config;
+extern struct mantis_hwconfig vp1034_config;
extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage);
-#endif // __MANTIS_VP1034_H
+#endif /* __MANTIS_VP1034_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
#include "mantis_vp1041.h"
#include "stb0899_reg.h"
+#include "stb0899_drv.h"
#include "stb0899_cfg.h"
#include "stb6100_cfg.h"
+#include "stb6100.h"
+#include "lnbp21.h"
#define MANTIS_MODEL_NAME "VP-1041"
#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2"
-struct mantis_hwconfig vp1041_mantis_config = {
- .model_name = MANTIS_MODEL_NAME,
- .dev_type = MANTIS_DEV_TYPE,
- .ts_size = MANTIS_TS_188,
- .baud_rate = MANTIS_BAUD_9600,
- .parity = MANTIS_PARITY_NONE,
- .bytes = 0,
-};
-
static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = {
// 0x0000000b , /* SYSREG */
{ 0xffff , 0xff },
};
-struct stb0899_config vp1041_config = {
+struct stb0899_config vp1041_stb0899_config = {
.init_dev = vp1041_stb0899_s1_init_1,
.init_s2_demod = stb0899_s2_init_2,
.init_s1_demod = vp1041_stb0899_s1_init_3,
.tuner_address = 0x60,
.refclock = 27000000,
};
+
+static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ int err = 0;
+
+ err = mantis_frontend_power(mantis, POWER_ON);
+ if (err == 0) {
+ mantis_frontend_soft_reset(mantis);
+ msleep(250);
+ mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter);
+ if (mantis->fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
+ vp1041_stb0899_config.demod_address);
+
+ if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) {
+ if (!lnbp21_attach(mantis->fe, adapter, 0, 0)) {
+ printk("%s: No LNBP21 found!\n", __func__);
+ }
+ }
+ } else {
+ return -EREMOTEIO;
+ }
+ } else {
+ dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+ adapter->name,
+ err);
+
+ return -EIO;
+ }
+
+
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp1041_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp1041_frontend_init,
+ .power = GPIF_A12,
+ .reset = GPIF_A13,
+};
#ifndef __MANTIS_VP1041_H
#define __MANTIS_VP1041_H
-#include "dvb_frontend.h"
#include "mantis_common.h"
-#include "stb0899_drv.h"
-#include "stb6100.h"
-#include "lnbp21.h"
#define MANTIS_VP_1041_DVB_S2 0x0031
-#define TECHNISAT_SKYSTAR_HD2 0x0001
+#define SKYSTAR_HD2_10 0x0001
+#define SKYSTAR_HD2_20 0x0003
+#define CINERGY_S2_PCI_HD 0x1179
-extern struct mantis_hwconfig vp1041_mantis_config;
-extern struct stb0899_config vp1041_config;
-extern struct stb6100_config vp1041_stb6100_config;
+extern struct mantis_hwconfig vp1041_config;
-#endif // __MANTIS_VP1041_H
+#endif /* __MANTIS_VP1041_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
#include "mantis_common.h"
#include "mantis_vp2033.h"
#define MANTIS_MODEL_NAME "VP-2033"
#define MANTIS_DEV_TYPE "DVB-C"
-struct mantis_hwconfig vp2033_mantis_config = {
- .model_name = MANTIS_MODEL_NAME,
- .dev_type = MANTIS_DEV_TYPE,
- .ts_size = MANTIS_TS_204,
- .baud_rate = MANTIS_BAUD_9600,
- .parity = MANTIS_PARITY_NONE,
- .bytes = 0,
+struct tda1002x_config vp2033_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
};
-struct tda1002x_config philips_cu1216_config = {
+struct tda10023_config vp2033_tda10023_cu1216_config = {
.demod_address = 0x18 >> 1,
.invert = 1,
};
-u8 read_pwm(struct mantis_pci *mantis)
+static u8 read_pwm(struct mantis_pci *mantis)
{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
u8 b = 0xff;
u8 pwm;
struct i2c_msg msg[] = {
- {.addr = 0x50,.flags = 0,.buf = &b,.len = 1},
- {.addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1}
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
};
- if ((i2c_transfer(&mantis->adapter, msg, 2) != 2)
+ if ((i2c_transfer(adapter, msg, 2) != 2)
|| (pwm == 0xff))
pwm = 0x48;
return pwm;
}
-int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
u8 buf[6];
- struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) };
+ struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof (buf) };
int i;
#define CU1216_IF 36125000
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&mantis->adapter, &msg, 1) != 1)
+ if (i2c_transfer(adapter, &msg, 1) != 1)
return -EIO;
/* wait for the pll lock */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&mantis->adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
break;
msleep(10);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&mantis->adapter, &msg, 1) != 1)
+ if (i2c_transfer(adapter, &msg, 1) != 1)
return -EIO;
return 0;
}
+
+static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2033_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2033_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_204,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp2033_frontend_init,
+};
#ifndef __MANTIS_VP2033_H
#define __MANTIS_VP2033_H
-#include "dvb_frontend.h"
#include "mantis_common.h"
-#include "tda1002x.h"
#define MANTIS_VP_2033_DVB_C 0x0008
-extern struct tda1002x_config philips_cu1216_config;
-extern struct mantis_hwconfig vp2033_mantis_config;
+extern struct mantis_hwconfig vp2033_config;
-extern int philips_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params);
-
-extern u8 read_pwm(struct mantis_pci *mantis);
-
-#endif // __MANTIS_VP2033_H
+#endif /* __MANTIS_VP2033_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "tda1002x.h"
#include "mantis_common.h"
#include "mantis_vp2040.h"
#define MANTIS_MODEL_NAME "VP-2040"
#define MANTIS_DEV_TYPE "DVB-C"
-struct mantis_hwconfig vp2040_mantis_config = {
+struct tda1002x_config vp2040_tda1002x_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+struct tda10023_config vp2040_tda10023_cu1216_config = {
+ .demod_address = 0x18 >> 1,
+ .invert = 1,
+};
+
+static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct mantis_pci *mantis = fe->dvb->priv;
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 buf[6];
+ struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof (buf) };
+ int i;
+
+#define CU1216_IF 36125000
+#define TUNER_MUL 62500
+
+ u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL;
+
+ buf[0] = (div >> 8) & 0x7f;
+ buf[1] = div & 0xff;
+ buf[2] = 0xce;
+ buf[3] = (params->frequency < 150000000 ? 0x01 :
+ params->frequency < 445000000 ? 0x02 : 0x04);
+ buf[4] = 0xde;
+ buf[5] = 0x20;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ /* wait for the pll lock */
+ msg.flags = I2C_M_RD;
+ msg.len = 1;
+ for (i = 0; i < 20; i++) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40))
+ break;
+
+ msleep(10);
+ }
+
+ /* switch the charge pump to the lower current */
+ msg.flags = 0;
+ msg.len = 2;
+ msg.buf = &buf[2];
+ buf[2] &= ~0x40;
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(adapter, &msg, 1) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static u8 read_pwm(struct mantis_pci *mantis)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ u8 b = 0xff;
+ u8 pwm;
+ struct i2c_msg msg[] = {
+ {.addr = 0x50, .flags = 0, .buf = &b, .len = 1},
+ {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1}
+ };
+
+ if ((i2c_transfer(adapter, msg, 2) != 2)
+ || (pwm == 0xff))
+ pwm = 0x48;
+
+ return pwm;
+}
+
+static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
+ fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ } else {
+ fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
+ adapter,
+ read_pwm(mantis));
+
+ if (fe) {
+ dprintk(MANTIS_ERROR, 1,
+ "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x",
+ vp2040_tda1002x_cu1216_config.demod_address);
+ }
+ }
+
+ if (fe) {
+ fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set;
+ dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success");
+ } else {
+ return -1;
+ }
+
+ mantis->fe = fe;
+ dprintk(MANTIS_DEBUG, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp2040_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
+
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
-};
-struct tda10023_config tda10023_cu1216_config = {
- .demod_address = 0x18 >> 1,
- .invert = 1,
+ .frontend_init = vp2040_frontend_init,
};
#ifndef __MANTIS_VP2040_H
#define __MANTIS_VP2040_H
-#include "dvb_frontend.h"
#include "mantis_common.h"
-#include "tda1002x.h"
#define MANTIS_VP_2040_DVB_C 0x0043
-#define TERRATEC_CINERGY_C_PCI 0x1178
-#define TECHNISAT_CABLESTAR_HD2 0x0002
+#define CINERGY_C 0x1178
+#define CABLESTAR_HD2 0x0002
-extern struct tda10023_config tda10023_cu1216_config;
-extern struct mantis_hwconfig vp2040_mantis_config;
+extern struct mantis_hwconfig vp2040_config;
-#endif //__MANTIS_VP2040_H
+#endif /* __MANTIS_VP2040_H */
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/irq.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include "dmxdev.h"
+#include "dvbdev.h"
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dvb_net.h"
+
+#include "zl10353.h"
#include "mantis_common.h"
#include "mantis_vp3030.h"
#define MANTIS_MODEL_NAME "VP-3030"
#define MANTIS_DEV_TYPE "DVB-T"
-struct mantis_hwconfig vp3030_mantis_config = {
- .model_name = MANTIS_MODEL_NAME,
- .dev_type = MANTIS_DEV_TYPE,
- .ts_size = MANTIS_TS_188,
- .baud_rate = MANTIS_BAUD_9600,
- .parity = MANTIS_PARITY_NONE,
- .bytes = 0,
-};
-
int panasonic_en57h12d5_set_params(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params)
{
return 0;
}
+
+static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+ struct i2c_adapter *adapter = &mantis->adapter;
+
+ dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+ fe = zl10353_attach(&mantis_vp3030_config, adapter);
+
+ if (!fe)
+ return -1;
+
+ mantis->fe = fe;
+ dprintk(MANTIS_ERROR, 1, "Done!");
+
+ return 0;
+}
+
+struct mantis_hwconfig vp3030_config = {
+ .model_name = MANTIS_MODEL_NAME,
+ .dev_type = MANTIS_DEV_TYPE,
+ .ts_size = MANTIS_TS_188,
+
+ .baud_rate = MANTIS_BAUD_9600,
+ .parity = MANTIS_PARITY_NONE,
+ .bytes = 0,
+
+ .frontend_init = vp3030_frontend_init,
+};
#ifndef __MANTIS_VP3030_H
#define __MANTIS_VP3030_H
-#include "dvb_frontend.h"
#include "mantis_common.h"
-#include "dvb-pll.h"
-#include "zl10353.h"
#define MANTIS_VP_3030_DVB_T 0x0024
-extern struct zl10353_config mantis_vp3030_config;
-extern struct mantis_hwconfig vp3030_mantis_config;
+extern struct mantis_hwconfig vp3030_config;
-#endif // __MANTIS_VP3030_H
+#endif /* __MANTIS_VP3030_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff