#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
-#include <linux/timer.h>
#include <linux/jiffies.h>
#include <linux/kmod.h>
#include <linux/seq_file.h>
struct acpi_thermal_state state;
struct acpi_thermal_trips trips;
struct acpi_handle_list devices;
- struct timer_list timer;
struct thermal_zone_device *thermal_zone;
int tz_enabled;
struct mutex lock;
tz->polling_frequency = seconds * 10; /* Convert value to deci-seconds */
+ tz->thermal_zone->polling_delay = seconds * 1000;
+
+ if (tz->tz_enabled)
+ thermal_zone_device_update(tz->thermal_zone);
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Polling frequency set to %lu seconds\n",
tz->polling_frequency/10));
return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
}
-static int acpi_thermal_critical(struct acpi_thermal *tz)
-{
- if (!tz || !tz->trips.critical.flags.valid)
- return -EINVAL;
-
- if (tz->temperature >= tz->trips.critical.temperature) {
- printk(KERN_WARNING PREFIX "Critical trip point\n");
- tz->trips.critical.flags.enabled = 1;
- } else if (tz->trips.critical.flags.enabled)
- tz->trips.critical.flags.enabled = 0;
-
- acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
- tz->trips.critical.flags.enabled);
- acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
- dev_name(&tz->device->dev),
- ACPI_THERMAL_NOTIFY_CRITICAL,
- tz->trips.critical.flags.enabled);
-
- /* take no action if nocrt is set */
- if(!nocrt) {
- printk(KERN_EMERG
- "Critical temperature reached (%ld C), shutting down.\n",
- KELVIN_TO_CELSIUS(tz->temperature));
- orderly_poweroff(true);
- }
-
- return 0;
-}
-
-static int acpi_thermal_hot(struct acpi_thermal *tz)
-{
- if (!tz || !tz->trips.hot.flags.valid)
- return -EINVAL;
-
- if (tz->temperature >= tz->trips.hot.temperature) {
- printk(KERN_WARNING PREFIX "Hot trip point\n");
- tz->trips.hot.flags.enabled = 1;
- } else if (tz->trips.hot.flags.enabled)
- tz->trips.hot.flags.enabled = 0;
-
- acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
- tz->trips.hot.flags.enabled);
- acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
- dev_name(&tz->device->dev),
- ACPI_THERMAL_NOTIFY_HOT,
- tz->trips.hot.flags.enabled);
-
- /* TBD: Call user-mode "sleep(S4)" function if nocrt is cleared */
-
- return 0;
-}
-
-static void acpi_thermal_passive(struct acpi_thermal *tz)
-{
- int result = 1;
- struct acpi_thermal_passive *passive = NULL;
- int trend = 0;
- int i = 0;
-
-
- if (!tz || !tz->trips.passive.flags.valid)
- return;
-
- passive = &(tz->trips.passive);
-
- /*
- * Above Trip?
- * -----------
- * Calculate the thermal trend (using the passive cooling equation)
- * and modify the performance limit for all passive cooling devices
- * accordingly. Note that we assume symmetry.
- */
- if (tz->temperature >= passive->temperature) {
- trend =
- (passive->tc1 * (tz->temperature - tz->last_temperature)) +
- (passive->tc2 * (tz->temperature - passive->temperature));
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "trend[%d]=(tc1[%lu]*(tmp[%lu]-last[%lu]))+(tc2[%lu]*(tmp[%lu]-psv[%lu]))\n",
- trend, passive->tc1, tz->temperature,
- tz->last_temperature, passive->tc2,
- tz->temperature, passive->temperature));
- passive->flags.enabled = 1;
- /* Heating up? */
- if (trend > 0)
- for (i = 0; i < passive->devices.count; i++)
- acpi_processor_set_thermal_limit(passive->
- devices.
- handles[i],
- ACPI_PROCESSOR_LIMIT_INCREMENT);
- /* Cooling off? */
- else if (trend < 0) {
- for (i = 0; i < passive->devices.count; i++)
- /*
- * assume that we are on highest
- * freq/lowest thrott and can leave
- * passive mode, even in error case
- */
- if (!acpi_processor_set_thermal_limit
- (passive->devices.handles[i],
- ACPI_PROCESSOR_LIMIT_DECREMENT))
- result = 0;
- /*
- * Leave cooling mode, even if the temp might
- * higher than trip point This is because some
- * machines might have long thermal polling
- * frequencies (tsp) defined. We will fall back
- * into passive mode in next cycle (probably quicker)
- */
- if (result) {
- passive->flags.enabled = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Disabling passive cooling, still above threshold,"
- " but we are cooling down\n"));
- }
- }
- return;
- }
-
- /*
- * Below Trip?
- * -----------
- * Implement passive cooling hysteresis to slowly increase performance
- * and avoid thrashing around the passive trip point. Note that we
- * assume symmetry.
- */
- if (!passive->flags.enabled)
- return;
- for (i = 0; i < passive->devices.count; i++)
- if (!acpi_processor_set_thermal_limit
- (passive->devices.handles[i],
- ACPI_PROCESSOR_LIMIT_DECREMENT))
- result = 0;
- if (result) {
- passive->flags.enabled = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Disabling passive cooling (zone is cool)\n"));
- }
-}
-
-static void acpi_thermal_active(struct acpi_thermal *tz)
-{
- int result = 0;
- struct acpi_thermal_active *active = NULL;
- int i = 0;
- int j = 0;
- unsigned long maxtemp = 0;
-
-
- if (!tz)
- return;
-
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- active = &(tz->trips.active[i]);
- if (!active || !active->flags.valid)
- break;
- if (tz->temperature >= active->temperature) {
- /*
- * Above Threshold?
- * ----------------
- * If not already enabled, turn ON all cooling devices
- * associated with this active threshold.
- */
- if (active->temperature > maxtemp)
- tz->state.active_index = i;
- maxtemp = active->temperature;
- if (active->flags.enabled)
- continue;
- for (j = 0; j < active->devices.count; j++) {
- result =
- acpi_bus_set_power(active->devices.
- handles[j],
- ACPI_STATE_D0);
- if (result) {
- printk(KERN_WARNING PREFIX
- "Unable to turn cooling device [%p] 'on'\n",
- active->devices.
- handles[j]);
- continue;
- }
- active->flags.enabled = 1;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Cooling device [%p] now 'on'\n",
- active->devices.handles[j]));
- }
- continue;
- }
- if (!active->flags.enabled)
- continue;
- /*
- * Below Threshold?
- * ----------------
- * Turn OFF all cooling devices associated with this
- * threshold.
- */
- for (j = 0; j < active->devices.count; j++) {
- result = acpi_bus_set_power(active->devices.handles[j],
- ACPI_STATE_D3);
- if (result) {
- printk(KERN_WARNING PREFIX
- "Unable to turn cooling device [%p] 'off'\n",
- active->devices.handles[j]);
- continue;
- }
- active->flags.enabled = 0;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Cooling device [%p] now 'off'\n",
- active->devices.handles[j]));
- }
- }
-}
-
-static void acpi_thermal_check(void *context);
-
-static void acpi_thermal_run(unsigned long data)
-{
- struct acpi_thermal *tz = (struct acpi_thermal *)data;
- if (!tz->zombie)
- acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data);
-}
-
-static void acpi_thermal_active_off(void *data)
-{
- int result = 0;
- struct acpi_thermal *tz = data;
- int i = 0;
- int j = 0;
- struct acpi_thermal_active *active = NULL;
-
- if (!tz) {
- printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
- return;
- }
-
- result = acpi_thermal_get_temperature(tz);
- if (result)
- return;
-
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- active = &(tz->trips.active[i]);
- if (!active || !active->flags.valid)
- break;
- if (tz->temperature >= active->temperature) {
- /*
- * If the thermal temperature is greater than the
- * active threshod, unnecessary to turn off the
- * the active cooling device.
- */
- continue;
- }
- /*
- * Below Threshold?
- * ----------------
- * Turn OFF all cooling devices associated with this
- * threshold.
- */
- for (j = 0; j < active->devices.count; j++)
- result = acpi_bus_set_power(active->devices.handles[j],
- ACPI_STATE_D3);
- }
-}
-
static void acpi_thermal_check(void *data)
{
- int result = 0;
struct acpi_thermal *tz = data;
- unsigned long sleep_time = 0;
- unsigned long timeout_jiffies = 0;
- int i = 0;
- struct acpi_thermal_state state;
-
-
- if (!tz) {
- printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
- return;
- }
-
- /* Check if someone else is already running */
- if (!mutex_trylock(&tz->lock))
- return;
-
- state = tz->state;
-
- result = acpi_thermal_get_temperature(tz);
- if (result)
- goto unlock;
-
- if (!tz->tz_enabled)
- goto unlock;
-
- memset(&tz->state, 0, sizeof(tz->state));
-
- /*
- * Check Trip Points
- * -----------------
- * Compare the current temperature to the trip point values to see
- * if we've entered one of the thermal policy states. Note that
- * this function determines when a state is entered, but the
- * individual policy decides when it is exited (e.g. hysteresis).
- */
- if (tz->trips.critical.flags.valid)
- state.critical |=
- (tz->temperature >= tz->trips.critical.temperature);
- if (tz->trips.hot.flags.valid)
- state.hot |= (tz->temperature >= tz->trips.hot.temperature);
- if (tz->trips.passive.flags.valid)
- state.passive |=
- (tz->temperature >= tz->trips.passive.temperature);
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
- if (tz->trips.active[i].flags.valid)
- state.active |=
- (tz->temperature >=
- tz->trips.active[i].temperature);
-
- /*
- * Invoke Policy
- * -------------
- * Separated from the above check to allow individual policy to
- * determine when to exit a given state.
- */
- if (state.critical)
- acpi_thermal_critical(tz);
- if (state.hot)
- acpi_thermal_hot(tz);
- if (state.passive)
- acpi_thermal_passive(tz);
- if (state.active)
- acpi_thermal_active(tz);
-
- /*
- * Calculate State
- * ---------------
- * Again, separated from the above two to allow independent policy
- * decisions.
- */
- tz->state.critical = tz->trips.critical.flags.enabled;
- tz->state.hot = tz->trips.hot.flags.enabled;
- tz->state.passive = tz->trips.passive.flags.enabled;
- tz->state.active = 0;
- for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
- tz->state.active |= tz->trips.active[i].flags.enabled;
-
- /*
- * Calculate Sleep Time
- * --------------------
- * If we're in the passive state, use _TSP's value. Otherwise
- * use the default polling frequency (e.g. _TZP). If no polling
- * frequency is specified then we'll wait forever (at least until
- * a thermal event occurs). Note that _TSP and _TZD values are
- * given in 1/10th seconds (we must covert to milliseconds).
- */
- if (tz->state.passive) {
- sleep_time = tz->trips.passive.tsp * 100;
- timeout_jiffies = jiffies + (HZ * sleep_time) / 1000;
- } else if (tz->polling_frequency > 0) {
- sleep_time = tz->polling_frequency * 100;
- timeout_jiffies = round_jiffies(jiffies + (HZ * sleep_time) / 1000);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n",
- tz->name, tz->temperature, sleep_time));
- /*
- * Schedule Next Poll
- * ------------------
- */
- if (!sleep_time) {
- if (timer_pending(&(tz->timer)))
- del_timer(&(tz->timer));
- } else {
- if (timer_pending(&(tz->timer)))
- mod_timer(&(tz->timer), timeout_jiffies);
- else {
- tz->timer.data = (unsigned long)tz;
- tz->timer.function = acpi_thermal_run;
- tz->timer.expires = timeout_jiffies;
- add_timer(&(tz->timer));
- }
- }
- unlock:
- mutex_unlock(&tz->lock);
+ thermal_zone_device_update(tz->thermal_zone);
}
/* sys I/F for generic thermal sysfs support */
return -EINVAL;
}
+static int thermal_notify(struct thermal_zone_device *thermal, int trip,
+ enum thermal_trip_type trip_type)
+{
+ u8 type = 0;
+ struct acpi_thermal *tz = thermal->devdata;
+
+ if (trip_type == THERMAL_TRIP_CRITICAL)
+ type = ACPI_THERMAL_NOTIFY_CRITICAL;
+ else if (trip_type == THERMAL_TRIP_HOT)
+ type = ACPI_THERMAL_NOTIFY_HOT;
+ else
+ return 0;
+
+ acpi_bus_generate_proc_event(tz->device, type, 1);
+ acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
+ tz->device->dev.bus_id, type, 1);
+
+ if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
+ return 1;
+
+ return 0;
+}
+
typedef int (*cb)(struct thermal_zone_device *, int,
struct thermal_cooling_device *);
static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
.get_trip_type = thermal_get_trip_type,
.get_trip_temp = thermal_get_trip_temp,
.get_crit_temp = thermal_get_crit_temp,
+ .notify = thermal_notify,
};
static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++, trips++);
- tz->thermal_zone = thermal_zone_device_register("acpitz",
- trips, tz, &acpi_thermal_zone_ops);
+
+ if (tz->trips.passive.flags.valid)
+ tz->thermal_zone =
+ thermal_zone_device_register("acpitz", trips, tz,
+ &acpi_thermal_zone_ops,
+ tz->trips.passive.tc1,
+ tz->trips.passive.tc2,
+ tz->trips.passive.tsp*100,
+ tz->polling_frequency*100);
+ else
+ tz->thermal_zone =
+ thermal_zone_device_register("acpitz", trips, tz,
+ &acpi_thermal_zone_ops,
+ 0, 0, 0,
+ tz->polling_frequency);
if (IS_ERR(tz->thermal_zone))
return -ENODEV;
if (!tz)
goto end;
- if (!tz->polling_frequency) {
+ if (!tz->thermal_zone->polling_delay) {
seq_puts(seq, "<polling disabled>\n");
goto end;
}
- seq_printf(seq, "polling frequency: %lu seconds\n",
- (tz->polling_frequency / 10));
+ seq_printf(seq, "polling frequency: %d seconds\n",
+ (tz->thermal_zone->polling_delay / 1000));
end:
return 0;
if (result)
goto unregister_thermal_zone;
- init_timer(&tz->timer);
-
- acpi_thermal_active_off(tz);
-
- acpi_thermal_check(tz);
-
status = acpi_install_notify_handler(device->handle,
ACPI_DEVICE_NOTIFY,
acpi_thermal_notify, tz);
acpi_status status = AE_OK;
struct acpi_thermal *tz = NULL;
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
tz = acpi_driver_data(device);
- /* avoid timer adding new defer task */
- tz->zombie = 1;
- /* wait for running timer (on other CPUs) finish */
- del_timer_sync(&(tz->timer));
- /* synchronize deferred task */
- acpi_os_wait_events_complete(NULL);
- /* deferred task may reinsert timer */
- del_timer_sync(&(tz->timer));
-
status = acpi_remove_notify_handler(device->handle,
ACPI_DEVICE_NOTIFY,
acpi_thermal_notify);
- /* Terminate policy */
- if (tz->trips.passive.flags.valid && tz->trips.passive.flags.enabled) {
- tz->trips.passive.flags.enabled = 0;
- acpi_thermal_passive(tz);
- }
- if (tz->trips.active[0].flags.valid
- && tz->trips.active[0].flags.enabled) {
- tz->trips.active[0].flags.enabled = 0;
- acpi_thermal_active(tz);
- }
-
acpi_thermal_remove_fs(device);
acpi_thermal_unregister_thermal_zone(tz);
mutex_destroy(&tz->lock);
#include <linux/idr.h>
#include <linux/thermal.h>
#include <linux/spinlock.h>
+#include <linux/reboot.h>
MODULE_AUTHOR("Zhang Rui");
MODULE_DESCRIPTION("Generic thermal management sysfs support");
}
#endif
+static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
+ int delay)
+{
+ cancel_delayed_work(&(tz->poll_queue));
+
+ if (!delay)
+ return;
+
+ if (delay > 1000)
+ schedule_delayed_work(&(tz->poll_queue),
+ round_jiffies(msecs_to_jiffies(delay)));
+ else
+ schedule_delayed_work(&(tz->poll_queue),
+ msecs_to_jiffies(delay));
+}
+
+static void thermal_zone_device_passive(struct thermal_zone_device *tz,
+ int temp, int trip_temp, int trip)
+{
+ int trend = 0;
+ struct thermal_cooling_device_instance *instance;
+ struct thermal_cooling_device *cdev;
+ long state, max_state;
+
+ /*
+ * Above Trip?
+ * -----------
+ * Calculate the thermal trend (using the passive cooling equation)
+ * and modify the performance limit for all passive cooling devices
+ * accordingly. Note that we assume symmetry.
+ */
+ if (temp >= trip_temp) {
+ tz->passive = true;
+
+ trend = (tz->tc1 * (temp - tz->last_temperature)) +
+ (tz->tc2 * (temp - trip_temp));
+
+ /* Heating up? */
+ if (trend > 0) {
+ list_for_each_entry(instance, &tz->cooling_devices,
+ node) {
+ if (instance->trip != trip)
+ continue;
+ cdev = instance->cdev;
+ cdev->ops->get_cur_state(cdev, &state);
+ cdev->ops->get_max_state(cdev, &max_state);
+ if (state++ < max_state)
+ cdev->ops->set_cur_state(cdev, state);
+ }
+ } else if (trend < 0) { /* Cooling off? */
+ list_for_each_entry(instance, &tz->cooling_devices,
+ node) {
+ if (instance->trip != trip)
+ continue;
+ cdev = instance->cdev;
+ cdev->ops->get_cur_state(cdev, &state);
+ cdev->ops->get_max_state(cdev, &max_state);
+ if (state > 0)
+ cdev->ops->set_cur_state(cdev, --state);
+ }
+ }
+ return;
+ }
+
+ /*
+ * Below Trip?
+ * -----------
+ * Implement passive cooling hysteresis to slowly increase performance
+ * and avoid thrashing around the passive trip point. Note that we
+ * assume symmetry.
+ */
+ list_for_each_entry(instance, &tz->cooling_devices, node) {
+ if (instance->trip != trip)
+ continue;
+ cdev = instance->cdev;
+ cdev->ops->get_cur_state(cdev, &state);
+ cdev->ops->get_max_state(cdev, &max_state);
+ if (state > 0)
+ cdev->ops->set_cur_state(cdev, --state);
+ if (state == 0)
+ tz->passive = false;
+ }
+}
+
+static void thermal_zone_device_check(struct work_struct *work)
+{
+ struct thermal_zone_device *tz = container_of(work, struct
+ thermal_zone_device,
+ poll_queue.work);
+ thermal_zone_device_update(tz);
+}
/**
* thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone
EXPORT_SYMBOL(thermal_cooling_device_unregister);
/**
+ * thermal_zone_device_update - force an update of a thermal zone's state
+ * @ttz: the thermal zone to update
+ */
+
+void thermal_zone_device_update(struct thermal_zone_device *tz)
+{
+ int count, ret = 0;
+ long temp, trip_temp;
+ enum thermal_trip_type trip_type;
+ struct thermal_cooling_device_instance *instance;
+ struct thermal_cooling_device *cdev;
+
+ mutex_lock(&tz->lock);
+
+ tz->ops->get_temp(tz, &temp);
+
+ for (count = 0; count < tz->trips; count++) {
+ tz->ops->get_trip_type(tz, count, &trip_type);
+ tz->ops->get_trip_temp(tz, count, &trip_temp);
+
+ switch (trip_type) {
+ case THERMAL_TRIP_CRITICAL:
+ if (temp > trip_temp) {
+ if (tz->ops->notify)
+ ret = tz->ops->notify(tz, count,
+ trip_type);
+ if (!ret) {
+ printk(KERN_EMERG
+ "Critical temperature reached (%ld C), shutting down.\n",
+ temp/1000);
+ orderly_poweroff(true);
+ }
+ }
+ break;
+ case THERMAL_TRIP_HOT:
+ if (temp > trip_temp)
+ if (tz->ops->notify)
+ tz->ops->notify(tz, count, trip_type);
+ break;
+ case THERMAL_TRIP_ACTIVE:
+ list_for_each_entry(instance, &tz->cooling_devices,
+ node) {
+ if (instance->trip != count)
+ continue;
+
+ cdev = instance->cdev;
+
+ if (temp > trip_temp)
+ cdev->ops->set_cur_state(cdev, 1);
+ else
+ cdev->ops->set_cur_state(cdev, 0);
+ }
+ break;
+ case THERMAL_TRIP_PASSIVE:
+ if (temp > trip_temp || tz->passive)
+ thermal_zone_device_passive(tz, temp,
+ trip_temp, count);
+ break;
+ }
+ }
+ tz->last_temperature = temp;
+ if (tz->passive)
+ thermal_zone_device_set_polling(tz, tz->passive_delay);
+ else if (tz->polling_delay)
+ thermal_zone_device_set_polling(tz, tz->polling_delay);
+ mutex_unlock(&tz->lock);
+}
+EXPORT_SYMBOL(thermal_zone_device_update);
+
+/**
* thermal_zone_device_register - register a new thermal zone device
* @type: the thermal zone device type
* @trips: the number of trip points the thermal zone support
* @devdata: private device data
* @ops: standard thermal zone device callbacks
+ * @tc1: thermal coefficient 1 for passive calculations
+ * @tc2: thermal coefficient 2 for passive calculations
+ * @passive_delay: number of milliseconds to wait between polls when
+ * performing passive cooling
+ * @polling_delay: number of milliseconds to wait between polls when checking
+ * whether trip points have been crossed (0 for interrupt
+ * driven systems)
*
* thermal_zone_device_unregister() must be called when the device is no
- * longer needed.
+ * longer needed. The passive cooling formula uses tc1 and tc2 as described in
+ * section 11.1.5.1 of the ACPI specification 3.0.
*/
struct thermal_zone_device *thermal_zone_device_register(char *type,
int trips,
void *devdata, struct
thermal_zone_device_ops
- *ops)
+ *ops, int tc1, int
+ tc2,
+ int passive_delay,
+ int polling_delay)
{
struct thermal_zone_device *tz;
struct thermal_cooling_device *pos;
tz->device.class = &thermal_class;
tz->devdata = devdata;
tz->trips = trips;
+ tz->tc1 = tc1;
+ tz->tc2 = tc2;
+ tz->passive_delay = passive_delay;
+ tz->polling_delay = polling_delay;
+
dev_set_name(&tz->device, "thermal_zone%d", tz->id);
result = device_register(&tz->device);
if (result) {
}
mutex_unlock(&thermal_list_lock);
+ INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
+
+ thermal_zone_device_update(tz);
+
if (!result)
return tz;
tz->ops->unbind(tz, cdev);
mutex_unlock(&thermal_list_lock);
+ thermal_zone_device_set_polling(tz, 0);
+
if (tz->type[0])
device_remove_file(&tz->device, &dev_attr_type);
device_remove_file(&tz->device, &dev_attr_temp);
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff