obj-$(CONFIG_STMMAC_ETH) += stmmac.o
stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
-stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \
+stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o dwmac_lib.o \
mac100.o gmac.o $(stmmac-y)
#include "descs.h"
#include <linux/io.h>
-/* *********************************************
- DMA CRS Control and Status Register Mapping
- * *********************************************/
-#define DMA_BUS_MODE 0x00001000 /* Bus Mode */
-#define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */
-#define DMA_RCV_POLL_DEMAND 0x00001008 /* Received Poll Demand */
-#define DMA_RCV_BASE_ADDR 0x0000100c /* Receive List Base */
-#define DMA_TX_BASE_ADDR 0x00001010 /* Transmit List Base */
-#define DMA_STATUS 0x00001014 /* Status Register */
-#define DMA_CONTROL 0x00001018 /* Ctrl (Operational Mode) */
-#define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */
-#define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */
-#define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */
-#define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */
-
-/* ********************************
- DMA Control register defines
- * ********************************/
-#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */
-#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */
-
-/* **************************************
- DMA Interrupt Enable register defines
- * **************************************/
-/**** NORMAL INTERRUPT ****/
-#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */
-#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */
-#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavailable */
-#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */
-#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */
-
-#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
- DMA_INTR_ENA_TIE)
-
-/**** ABNORMAL INTERRUPT ****/
-#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */
-#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */
-#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */
-#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */
-#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */
-#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */
-#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */
-#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */
-#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */
-#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */
-
-#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
- DMA_INTR_ENA_UNE)
-
-/* DMA default interrupt mask */
-#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
-
-/* ****************************
- * DMA Status register defines
- * ****************************/
-#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */
-#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */
-#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int. */
-#define DMA_STATUS_GMI 0x08000000
-#define DMA_STATUS_GLI 0x04000000
-#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */
-#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */
-#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */
-#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */
-#define DMA_STATUS_TS_SHIFT 20
-#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */
-#define DMA_STATUS_RS_SHIFT 17
-#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */
-#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */
-#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */
-#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */
-#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */
-#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */
-#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */
-#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */
-#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */
-#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */
-#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */
-#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */
-#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavailable */
-#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */
-#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */
-
-/* Other defines */
-#define HASH_TABLE_SIZE 64
-#define PAUSE_TIME 0x200
-
-/* Flow Control defines */
-#define FLOW_OFF 0
-#define FLOW_RX 1
-#define FLOW_TX 2
-#define FLOW_AUTO (FLOW_TX | FLOW_RX)
-
-/* DMA STORE-AND-FORWARD Operation Mode */
-#define SF_DMA_MODE 1
-
-#define HW_CSUM 1
-#define NO_HW_CSUM 0
-
-/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
-#define BUF_SIZE_16KiB 16384
-#define BUF_SIZE_8KiB 8192
-#define BUF_SIZE_4KiB 4096
-#define BUF_SIZE_2KiB 2048
-
-/* Power Down and WOL */
-#define PMT_NOT_SUPPORTED 0
-#define PMT_SUPPORTED 1
-
-/* Common MAC defines */
-#define MAC_CTRL_REG 0x00000000 /* MAC Control */
-#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
-#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */
-
-/* MAC Management Counters register */
-#define MMC_CONTROL 0x00000100 /* MMC Control */
-#define MMC_HIGH_INTR 0x00000104 /* MMC High Interrupt */
-#define MMC_LOW_INTR 0x00000108 /* MMC Low Interrupt */
-#define MMC_HIGH_INTR_MASK 0x0000010c /* MMC High Interrupt Mask */
-#define MMC_LOW_INTR_MASK 0x00000110 /* MMC Low Interrupt Mask */
-
-#define MMC_CONTROL_MAX_FRM_MASK 0x0003ff8 /* Maximum Frame Size */
-#define MMC_CONTROL_MAX_FRM_SHIFT 3
-#define MMC_CONTROL_MAX_FRAME 0x7FF
-
struct stmmac_extra_stats {
/* Transmit errors */
unsigned long tx_underflow ____cacheline_aligned;
unsigned long normal_irq_n;
};
-/* GMAC core can compute the checksums in HW. */
-enum rx_frame_status {
+#define HASH_TABLE_SIZE 64
+#define PAUSE_TIME 0x200
+
+/* Flow Control defines */
+#define FLOW_OFF 0
+#define FLOW_RX 1
+#define FLOW_TX 2
+#define FLOW_AUTO (FLOW_TX | FLOW_RX)
+
+#define SF_DMA_MODE 1 /* DMA STORE-AND-FORWARD Operation Mode */
+
+#define HW_CSUM 1
+#define NO_HW_CSUM 0
+enum rx_frame_status { /* IPC status */
good_frame = 0,
discard_frame = 1,
csum_none = 2,
};
-static inline void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
- unsigned int high, unsigned int low)
-{
- unsigned long data;
-
- data = (addr[5] << 8) | addr[4];
- writel(data, ioaddr + high);
- data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
- writel(data, ioaddr + low);
+enum tx_dma_irq_status {
+ tx_hard_error = 1,
+ tx_hard_error_bump_tc = 2,
+ handle_tx_rx = 3,
+};
- return;
-}
+/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
+#define BUF_SIZE_16KiB 16384
+#define BUF_SIZE_8KiB 8192
+#define BUF_SIZE_4KiB 4096
+#define BUF_SIZE_2KiB 2048
-static inline void stmmac_get_mac_addr(unsigned long ioaddr,
- unsigned char *addr, unsigned int high,
- unsigned int low)
-{
- unsigned int hi_addr, lo_addr;
+/* Power Down and WOL */
+#define PMT_NOT_SUPPORTED 0
+#define PMT_SUPPORTED 1
- /* Read the MAC address from the hardware */
- hi_addr = readl(ioaddr + high);
- lo_addr = readl(ioaddr + low);
+/* Common MAC defines */
+#define MAC_CTRL_REG 0x00000000 /* MAC Control */
+#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
+#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */
- /* Extract the MAC address from the high and low words */
- addr[0] = lo_addr & 0xff;
- addr[1] = (lo_addr >> 8) & 0xff;
- addr[2] = (lo_addr >> 16) & 0xff;
- addr[3] = (lo_addr >> 24) & 0xff;
- addr[4] = hi_addr & 0xff;
- addr[5] = (hi_addr >> 8) & 0xff;
+/* MAC Management Counters register */
+#define MMC_CONTROL 0x00000100 /* MMC Control */
+#define MMC_HIGH_INTR 0x00000104 /* MMC High Interrupt */
+#define MMC_LOW_INTR 0x00000108 /* MMC Low Interrupt */
+#define MMC_HIGH_INTR_MASK 0x0000010c /* MMC High Interrupt Mask */
+#define MMC_LOW_INTR_MASK 0x00000110 /* MMC Low Interrupt Mask */
- return;
-}
+#define MMC_CONTROL_MAX_FRM_MASK 0x0003ff8 /* Maximum Frame Size */
+#define MMC_CONTROL_MAX_FRM_SHIFT 3
+#define MMC_CONTROL_MAX_FRAME 0x7FF
struct stmmac_desc_ops {
/* DMA RX descriptor ring initialization */
/* To track extra statistic (if supported) */
void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x,
unsigned long ioaddr);
+ void (*enable_dma_transmission) (unsigned long ioaddr);
+ void (*enable_dma_irq) (unsigned long ioaddr);
+ void (*disable_dma_irq) (unsigned long ioaddr);
+ void (*start_tx) (unsigned long ioaddr);
+ void (*stop_tx) (unsigned long ioaddr);
+ void (*start_rx) (unsigned long ioaddr);
+ void (*stop_rx) (unsigned long ioaddr);
+ int (*dma_interrupt) (unsigned long ioaddr,
+ struct stmmac_extra_stats *x);
};
struct stmmac_ops {
struct mac_device_info *gmac_setup(unsigned long addr);
struct mac_device_info *mac100_setup(unsigned long addr);
+
+extern void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
+ unsigned int high, unsigned int low);
+extern void stmmac_get_mac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int high, unsigned int low);
--- /dev/null
+/*******************************************************************************
+ DWMAC DMA Header file.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+/* DMA CRS Control and Status Register Mapping */
+#define DMA_BUS_MODE 0x00001000 /* Bus Mode */
+#define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */
+#define DMA_RCV_POLL_DEMAND 0x00001008 /* Received Poll Demand */
+#define DMA_RCV_BASE_ADDR 0x0000100c /* Receive List Base */
+#define DMA_TX_BASE_ADDR 0x00001010 /* Transmit List Base */
+#define DMA_STATUS 0x00001014 /* Status Register */
+#define DMA_CONTROL 0x00001018 /* Ctrl (Operational Mode) */
+#define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */
+#define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */
+#define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */
+#define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */
+
+/* DMA Control register defines */
+#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */
+#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */
+
+/* DMA Normal interrupt */
+#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */
+#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */
+#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavailable */
+#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */
+#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */
+
+#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
+ DMA_INTR_ENA_TIE)
+
+/* DMA Abnormal interrupt */
+#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */
+#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */
+#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */
+#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */
+#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */
+#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */
+#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */
+#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */
+#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */
+#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */
+
+#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
+ DMA_INTR_ENA_UNE)
+
+/* DMA default interrupt mask */
+#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
+
+/* DMA Status register defines */
+#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */
+#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */
+#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int */
+#define DMA_STATUS_GMI 0x08000000
+#define DMA_STATUS_GLI 0x04000000
+#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */
+#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */
+#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */
+#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */
+#define DMA_STATUS_TS_SHIFT 20
+#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */
+#define DMA_STATUS_RS_SHIFT 17
+#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */
+#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */
+#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */
+#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */
+#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */
+#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */
+#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */
+#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */
+#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */
+#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */
+#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */
+#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */
+#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavailable */
+#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */
+#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */
+
+extern void dwmac_enable_dma_transmission(unsigned long ioaddr);
+extern void dwmac_enable_dma_irq(unsigned long ioaddr);
+extern void dwmac_disable_dma_irq(unsigned long ioaddr);
+extern void dwmac_dma_start_tx(unsigned long ioaddr);
+extern void dwmac_dma_stop_tx(unsigned long ioaddr);
+extern void dwmac_dma_start_rx(unsigned long ioaddr);
+extern void dwmac_dma_stop_rx(unsigned long ioaddr);
+extern int dwmac_dma_interrupt(unsigned long ioaddr,
+ struct stmmac_extra_stats *x);
--- /dev/null
+/*******************************************************************************
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/io.h>
+#include "common.h"
+#include "dwmac_dma.h"
+
+#undef DWMAC_DMA_DEBUG
+#ifdef DWMAC_DMA_DEBUG
+#define DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define DBG(fmt, args...) do { } while (0)
+#endif
+
+/* CSR1 enables the transmit DMA to check for new descriptor */
+void dwmac_enable_dma_transmission(unsigned long ioaddr)
+{
+ writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
+}
+
+void dwmac_enable_dma_irq(unsigned long ioaddr)
+{
+ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+}
+
+void dwmac_disable_dma_irq(unsigned long ioaddr)
+{
+ writel(0, ioaddr + DMA_INTR_ENA);
+}
+
+void dwmac_dma_start_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value |= DMA_CONTROL_ST;
+ writel(value, ioaddr + DMA_CONTROL);
+ return;
+}
+
+void dwmac_dma_stop_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value &= ~DMA_CONTROL_ST;
+ writel(value, ioaddr + DMA_CONTROL);
+ return;
+}
+
+void dwmac_dma_start_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value |= DMA_CONTROL_SR;
+ writel(value, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+void dwmac_dma_stop_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value &= ~DMA_CONTROL_SR;
+ writel(value, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+#ifdef DWMAC_DMA_DEBUG
+static void show_tx_process_state(unsigned int status)
+{
+ unsigned int state;
+ state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
+
+ switch (state) {
+ case 0:
+ pr_info("- TX (Stopped): Reset or Stop command\n");
+ break;
+ case 1:
+ pr_info("- TX (Running):Fetching the Tx desc\n");
+ break;
+ case 2:
+ pr_info("- TX (Running): Waiting for end of tx\n");
+ break;
+ case 3:
+ pr_info("- TX (Running): Reading the data "
+ "and queuing the data into the Tx buf\n");
+ break;
+ case 6:
+ pr_info("- TX (Suspended): Tx Buff Underflow "
+ "or an unavailable Transmit descriptor\n");
+ break;
+ case 7:
+ pr_info("- TX (Running): Closing Tx descriptor\n");
+ break;
+ default:
+ break;
+ }
+ return;
+}
+
+static void show_rx_process_state(unsigned int status)
+{
+ unsigned int state;
+ state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
+
+ switch (state) {
+ case 0:
+ pr_info("- RX (Stopped): Reset or Stop command\n");
+ break;
+ case 1:
+ pr_info("- RX (Running): Fetching the Rx desc\n");
+ break;
+ case 2:
+ pr_info("- RX (Running):Checking for end of pkt\n");
+ break;
+ case 3:
+ pr_info("- RX (Running): Waiting for Rx pkt\n");
+ break;
+ case 4:
+ pr_info("- RX (Suspended): Unavailable Rx buf\n");
+ break;
+ case 5:
+ pr_info("- RX (Running): Closing Rx descriptor\n");
+ break;
+ case 6:
+ pr_info("- RX(Running): Flushing the current frame"
+ " from the Rx buf\n");
+ break;
+ case 7:
+ pr_info("- RX (Running): Queuing the Rx frame"
+ " from the Rx buf into memory\n");
+ break;
+ default:
+ break;
+ }
+ return;
+}
+#endif
+
+int dwmac_dma_interrupt(unsigned long ioaddr,
+ struct stmmac_extra_stats *x)
+{
+ int ret = 0;
+ /* read the status register (CSR5) */
+ u32 intr_status = readl(ioaddr + DMA_STATUS);
+
+ DBG(INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
+#ifdef DWMAC_DMA_DEBUG
+ /* It displays the DMA process states (CSR5 register) */
+ show_tx_process_state(intr_status);
+ show_rx_process_state(intr_status);
+#endif
+ /* ABNORMAL interrupts */
+ if (unlikely(intr_status & DMA_STATUS_AIS)) {
+ DBG(INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
+ if (unlikely(intr_status & DMA_STATUS_UNF)) {
+ DBG(INFO, "transmit underflow\n");
+ ret = tx_hard_error_bump_tc;
+ x->tx_undeflow_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_TJT)) {
+ DBG(INFO, "transmit jabber\n");
+ x->tx_jabber_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_OVF)) {
+ DBG(INFO, "recv overflow\n");
+ x->rx_overflow_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RU)) {
+ DBG(INFO, "receive buffer unavailable\n");
+ x->rx_buf_unav_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RPS)) {
+ DBG(INFO, "receive process stopped\n");
+ x->rx_process_stopped_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RWT)) {
+ DBG(INFO, "receive watchdog\n");
+ x->rx_watchdog_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_ETI)) {
+ DBG(INFO, "transmit early interrupt\n");
+ x->tx_early_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_TPS)) {
+ DBG(INFO, "transmit process stopped\n");
+ x->tx_process_stopped_irq++;
+ ret = tx_hard_error;
+ }
+ if (unlikely(intr_status & DMA_STATUS_FBI)) {
+ DBG(INFO, "fatal bus error\n");
+ x->fatal_bus_error_irq++;
+ ret = tx_hard_error;
+ }
+ }
+ /* TX/RX NORMAL interrupts */
+ if (intr_status & DMA_STATUS_NIS) {
+ x->normal_irq_n++;
+ if (likely((intr_status & DMA_STATUS_RI) ||
+ (intr_status & (DMA_STATUS_TI))))
+ ret = handle_tx_rx;
+ }
+ /* Optional hardware blocks, interrupts should be disabled */
+ if (unlikely(intr_status &
+ (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+ pr_info("%s: unexpected status %08x\n", __func__, intr_status);
+ /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
+ writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
+
+ DBG(INFO, "\n\n");
+ return ret;
+}
+
+
+void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
+ unsigned int high, unsigned int low)
+{
+ unsigned long data;
+
+ data = (addr[5] << 8) | addr[4];
+ writel(data, ioaddr + high);
+ data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+ writel(data, ioaddr + low);
+
+ return;
+}
+
+void stmmac_get_mac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int high, unsigned int low)
+{
+ unsigned int hi_addr, lo_addr;
+
+ /* Read the MAC address from the hardware */
+ hi_addr = readl(ioaddr + high);
+ lo_addr = readl(ioaddr + low);
+
+ /* Extract the MAC address from the high and low words */
+ addr[0] = lo_addr & 0xff;
+ addr[1] = (lo_addr >> 8) & 0xff;
+ addr[2] = (lo_addr >> 16) & 0xff;
+ addr[3] = (lo_addr >> 24) & 0xff;
+ addr[4] = hi_addr & 0xff;
+ addr[5] = (hi_addr >> 8) & 0xff;
+
+ return;
+}
+
#include "stmmac.h"
#include "gmac.h"
+#include "dwmac_dma.h"
#undef GMAC_DEBUG
/*#define GMAC_DEBUG*/
.dump_regs = gmac_dump_dma_regs,
.dma_mode = gmac_dma_operation_mode,
.dma_diagnostic_fr = gmac_dma_diagnostic_fr,
+ .enable_dma_transmission = dwmac_enable_dma_transmission,
+ .enable_dma_irq = dwmac_enable_dma_irq,
+ .disable_dma_irq = dwmac_disable_dma_irq,
+ .start_tx = dwmac_dma_start_tx,
+ .stop_tx = dwmac_dma_stop_tx,
+ .start_rx = dwmac_dma_start_rx,
+ .stop_rx = dwmac_dma_stop_rx,
+ .dma_interrupt = dwmac_dma_interrupt,
};
struct stmmac_desc_ops gmac_desc_ops = {
#include "common.h"
#include "mac100.h"
+#include "dwmac_dma.h"
#undef MAC100_DEBUG
/*#define MAC100_DEBUG*/
.dump_regs = mac100_dump_dma_regs,
.dma_mode = mac100_dma_operation_mode,
.dma_diagnostic_fr = mac100_dma_diagnostic_fr,
+ .enable_dma_transmission = dwmac_enable_dma_transmission,
+ .enable_dma_irq = dwmac_enable_dma_irq,
+ .disable_dma_irq = dwmac_disable_dma_irq,
+ .start_tx = dwmac_dma_start_tx,
+ .stop_tx = dwmac_dma_stop_tx,
+ .start_rx = dwmac_dma_start_rx,
+ .stop_rx = dwmac_dma_stop_rx,
+ .dma_interrupt = dwmac_dma_interrupt,
};
struct stmmac_desc_ops mac100_desc_ops = {
#include <linux/phy.h>
#include "stmmac.h"
+#include "dwmac_dma.h"
#define REG_SPACE_SIZE 0x1054
#define MAC100_ETHTOOL_NAME "st_mac100"
}
/**
- * stmmac_dma_start_tx
- * @ioaddr: device I/O address
- * Description: this function starts the DMA tx process.
- */
-static void stmmac_dma_start_tx(unsigned long ioaddr)
-{
- u32 value = readl(ioaddr + DMA_CONTROL);
- value |= DMA_CONTROL_ST;
- writel(value, ioaddr + DMA_CONTROL);
- return;
-}
-
-static void stmmac_dma_stop_tx(unsigned long ioaddr)
-{
- u32 value = readl(ioaddr + DMA_CONTROL);
- value &= ~DMA_CONTROL_ST;
- writel(value, ioaddr + DMA_CONTROL);
- return;
-}
-
-/**
- * stmmac_dma_start_rx
- * @ioaddr: device I/O address
- * Description: this function starts the DMA rx process.
- */
-static void stmmac_dma_start_rx(unsigned long ioaddr)
-{
- u32 value = readl(ioaddr + DMA_CONTROL);
- value |= DMA_CONTROL_SR;
- writel(value, ioaddr + DMA_CONTROL);
-
- return;
-}
-
-static void stmmac_dma_stop_rx(unsigned long ioaddr)
-{
- u32 value = readl(ioaddr + DMA_CONTROL);
- value &= ~DMA_CONTROL_SR;
- writel(value, ioaddr + DMA_CONTROL);
-
- return;
-}
-
-/**
* stmmac_dma_operation_mode - HW DMA operation mode
* @priv : pointer to the private device structure.
* Description: it sets the DMA operation mode: tx/rx DMA thresholds
return;
}
-#ifdef STMMAC_DEBUG
-/**
- * show_tx_process_state
- * @status: tx descriptor status field
- * Description: it shows the Transmit Process State for CSR5[22:20]
- */
-static void show_tx_process_state(unsigned int status)
-{
- unsigned int state;
- state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
-
- switch (state) {
- case 0:
- pr_info("- TX (Stopped): Reset or Stop command\n");
- break;
- case 1:
- pr_info("- TX (Running):Fetching the Tx desc\n");
- break;
- case 2:
- pr_info("- TX (Running): Waiting for end of tx\n");
- break;
- case 3:
- pr_info("- TX (Running): Reading the data "
- "and queuing the data into the Tx buf\n");
- break;
- case 6:
- pr_info("- TX (Suspended): Tx Buff Underflow "
- "or an unavailable Transmit descriptor\n");
- break;
- case 7:
- pr_info("- TX (Running): Closing Tx descriptor\n");
- break;
- default:
- break;
- }
- return;
-}
-
-/**
- * show_rx_process_state
- * @status: rx descriptor status field
- * Description: it shows the Receive Process State for CSR5[19:17]
- */
-static void show_rx_process_state(unsigned int status)
-{
- unsigned int state;
- state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
-
- switch (state) {
- case 0:
- pr_info("- RX (Stopped): Reset or Stop command\n");
- break;
- case 1:
- pr_info("- RX (Running): Fetching the Rx desc\n");
- break;
- case 2:
- pr_info("- RX (Running):Checking for end of pkt\n");
- break;
- case 3:
- pr_info("- RX (Running): Waiting for Rx pkt\n");
- break;
- case 4:
- pr_info("- RX (Suspended): Unavailable Rx buf\n");
- break;
- case 5:
- pr_info("- RX (Running): Closing Rx descriptor\n");
- break;
- case 6:
- pr_info("- RX(Running): Flushing the current frame"
- " from the Rx buf\n");
- break;
- case 7:
- pr_info("- RX (Running): Queuing the Rx frame"
- " from the Rx buf into memory\n");
- break;
- default:
- break;
- }
- return;
-}
-#endif
-
/**
* stmmac_tx:
* @priv: private driver structure
priv->tm->timer_start(tmrate);
else
#endif
- writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
+ priv->hw->dma->enable_dma_irq(priv->dev->base_addr);
}
static inline void stmmac_disable_irq(struct stmmac_priv *priv)
priv->tm->timer_stop();
else
#endif
- writel(0, priv->dev->base_addr + DMA_INTR_ENA);
+ priv->hw->dma->disable_dma_irq(priv->dev->base_addr);
}
static int stmmac_has_work(struct stmmac_priv *priv)
{
netif_stop_queue(priv->dev);
- stmmac_dma_stop_tx(priv->dev->base_addr);
+ priv->hw->dma->stop_tx(priv->dev->base_addr);
dma_free_tx_skbufs(priv);
priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
priv->dirty_tx = 0;
priv->cur_tx = 0;
- stmmac_dma_start_tx(priv->dev->base_addr);
+ priv->hw->dma->start_tx(priv->dev->base_addr);
priv->dev->stats.tx_errors++;
netif_wake_queue(priv->dev);
return;
}
-/**
- * stmmac_dma_interrupt - Interrupt handler for the driver
- * @dev: net device structure
- * Description: Interrupt handler for the driver (DMA).
- */
-static void stmmac_dma_interrupt(struct net_device *dev)
-{
- unsigned long ioaddr = dev->base_addr;
- struct stmmac_priv *priv = netdev_priv(dev);
- /* read the status register (CSR5) */
- u32 intr_status = readl(ioaddr + DMA_STATUS);
-
- DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
-#ifdef STMMAC_DEBUG
- /* It displays the DMA transmit process state (CSR5 register) */
- if (netif_msg_tx_done(priv))
- show_tx_process_state(intr_status);
- if (netif_msg_rx_status(priv))
- show_rx_process_state(intr_status);
-#endif
- /* ABNORMAL interrupts */
- if (unlikely(intr_status & DMA_STATUS_AIS)) {
- DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
- if (unlikely(intr_status & DMA_STATUS_UNF)) {
- DBG(intr, INFO, "transmit underflow\n");
- if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) {
- /* Try to bump up the threshold */
- tc += 64;
- priv->hw->dma->dma_mode(ioaddr, tc,
- SF_DMA_MODE);
- priv->xstats.threshold = tc;
- }
- stmmac_tx_err(priv);
- priv->xstats.tx_undeflow_irq++;
- }
- if (unlikely(intr_status & DMA_STATUS_TJT)) {
- DBG(intr, INFO, "transmit jabber\n");
- priv->xstats.tx_jabber_irq++;
- }
- if (unlikely(intr_status & DMA_STATUS_OVF)) {
- DBG(intr, INFO, "recv overflow\n");
- priv->xstats.rx_overflow_irq++;
- }
- if (unlikely(intr_status & DMA_STATUS_RU)) {
- DBG(intr, INFO, "receive buffer unavailable\n");
- priv->xstats.rx_buf_unav_irq++;
- }
- if (unlikely(intr_status & DMA_STATUS_RPS)) {
- DBG(intr, INFO, "receive process stopped\n");
- priv->xstats.rx_process_stopped_irq++;
- }
- if (unlikely(intr_status & DMA_STATUS_RWT)) {
- DBG(intr, INFO, "receive watchdog\n");
- priv->xstats.rx_watchdog_irq++;
- }
- if (unlikely(intr_status & DMA_STATUS_ETI)) {
- DBG(intr, INFO, "transmit early interrupt\n");
- priv->xstats.tx_early_irq++;
- }
- if (unlikely(intr_status & DMA_STATUS_TPS)) {
- DBG(intr, INFO, "transmit process stopped\n");
- priv->xstats.tx_process_stopped_irq++;
- stmmac_tx_err(priv);
- }
- if (unlikely(intr_status & DMA_STATUS_FBI)) {
- DBG(intr, INFO, "fatal bus error\n");
- priv->xstats.fatal_bus_error_irq++;
- stmmac_tx_err(priv);
+static void stmmac_dma_interrupt(struct stmmac_priv *priv)
+{
+ unsigned long ioaddr = priv->dev->base_addr;
+ int status;
+
+ status = priv->hw->dma->dma_interrupt(priv->dev->base_addr,
+ &priv->xstats);
+ if (likely(status == handle_tx_rx))
+ _stmmac_schedule(priv);
+
+ else if (unlikely(status == tx_hard_error_bump_tc)) {
+ /* Try to bump up the dma threshold on this failure */
+ if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) {
+ tc += 64;
+ priv->hw->dma->dma_mode(ioaddr, tc, SF_DMA_MODE);
+ priv->xstats.threshold = tc;
}
- }
-
- /* TX/RX NORMAL interrupts */
- if (intr_status & DMA_STATUS_NIS) {
- priv->xstats.normal_irq_n++;
- if (likely((intr_status & DMA_STATUS_RI) ||
- (intr_status & (DMA_STATUS_TI))))
- _stmmac_schedule(priv);
- }
-
- /* Optional hardware blocks, interrupts should be disabled */
- if (unlikely(intr_status &
- (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
- pr_info("%s: unexpected status %08x\n", __func__, intr_status);
-
- /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
- writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
-
- DBG(intr, INFO, "\n\n");
+ stmmac_tx_err(priv);
+ } else if (unlikely(status == tx_hard_error))
+ stmmac_tx_err(priv);
return;
}
/* Start the ball rolling... */
DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
- stmmac_dma_start_tx(ioaddr);
- stmmac_dma_start_rx(ioaddr);
+ priv->hw->dma->start_tx(ioaddr);
+ priv->hw->dma->start_rx(ioaddr);
#ifdef CONFIG_STMMAC_TIMER
priv->tm->timer_start(tmrate);
free_irq(dev->irq, dev);
/* Stop TX/RX DMA and clear the descriptors */
- stmmac_dma_stop_tx(dev->base_addr);
- stmmac_dma_stop_rx(dev->base_addr);
+ priv->hw->dma->stop_tx(dev->base_addr);
+ priv->hw->dma->stop_rx(dev->base_addr);
/* Release and free the Rx/Tx resources */
free_dma_desc_resources(priv);
priv->hw->desc->prepare_tx_desc(desc, 0, buf2_size,
csum_insertion);
priv->hw->desc->set_tx_owner(desc);
-
priv->tx_skbuff[entry] = NULL;
} else {
desc->des2 = dma_map_single(priv->device, skb->data,
dev->stats.tx_bytes += skb->len;
- /* CSR1 enables the transmit DMA to check for new descriptor */
- writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND);
+ priv->hw->dma->enable_dma_transmission(dev->base_addr);
return NETDEV_TX_OK;
}
/* To handle GMAC own interrupts */
priv->hw->mac->host_irq_status(ioaddr);
}
- stmmac_dma_interrupt(dev);
+
+ stmmac_dma_interrupt(priv);
return IRQ_HANDLED;
}
static int stmmac_dvr_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
struct resource *res;
pr_info("%s:\n\tremoving driver", __func__);
- stmmac_dma_stop_rx(ndev->base_addr);
- stmmac_dma_stop_tx(ndev->base_addr);
+ priv->hw->dma->stop_rx(ndev->base_addr);
+ priv->hw->dma->stop_tx(ndev->base_addr);
stmmac_mac_disable_rx(ndev->base_addr);
stmmac_mac_disable_tx(ndev->base_addr);
napi_disable(&priv->napi);
/* Stop TX/RX DMA */
- stmmac_dma_stop_tx(dev->base_addr);
- stmmac_dma_stop_rx(dev->base_addr);
+ priv->hw->dma->stop_tx(dev->base_addr);
+ priv->hw->dma->stop_rx(dev->base_addr);
/* Clear the Rx/Tx descriptors */
priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
dis_ic);
/* Enable the MAC and DMA */
stmmac_mac_enable_rx(ioaddr);
stmmac_mac_enable_tx(ioaddr);
- stmmac_dma_start_tx(ioaddr);
- stmmac_dma_start_rx(ioaddr);
+ priv->hw->dma->start_tx(ioaddr);
+ priv->hw->dma->start_rx(ioaddr);
#ifdef CONFIG_STMMAC_TIMER
priv->tm->timer_start(tmrate);
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff