5stack-no-fp D965 5stack without front panel
dell-3stack Dell Dimension E520
dell-bios Fixes with Dell BIOS setup
+ volknob Fixes with volume-knob widget 0x24
auto BIOS setup (default)
STAC92HD71B*
struct snd_ac97 *ac97;
int ret;
+ writel(0, aaci->base + AC97_POWERDOWN);
/*
* Assert AACIRESET for 2us
*/
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1002, 0x0001, GENERIC),
/* Leadtek Winfast tv 2000xp delux */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, GENERIC),
+ /* Pinnacle PCTV */
+ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x11bd, 0x0012, GENERIC),
/* Voodoo TV 200 */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x121a, 0x3000, GENERIC),
/* Askey Computer Corp. MagicTView'99 */
#include "hda_codec.h"
#include "hda_local.h"
+/* define below to restrict the supported rates and formats */
+/* #define LIMITED_RATE_FMT_SUPPORT */
+
struct nvhdmi_spec {
struct hda_multi_out multiout;
{} /* terminator */
};
+#ifdef LIMITED_RATE_FMT_SUPPORT
+/* support only the safe format and rate */
+#define SUPPORTED_RATES SNDRV_PCM_RATE_48000
+#define SUPPORTED_MAXBPS 16
+#define SUPPORTED_FORMATS SNDRV_PCM_FMTBIT_S16_LE
+#else
+/* support all rates and formats */
+#define SUPPORTED_RATES \
+ (SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\
+ SNDRV_PCM_RATE_192000)
+#define SUPPORTED_MAXBPS 24
+#define SUPPORTED_FORMATS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+#endif
+
/*
* Controls
*/
.channels_min = 2,
.channels_max = 8,
.nid = Nv_Master_Convert_nid,
- .rates = SNDRV_PCM_RATE_48000,
- .maxbps = 16,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SUPPORTED_RATES,
+ .maxbps = SUPPORTED_MAXBPS,
+ .formats = SUPPORTED_FORMATS,
.ops = {
.open = nvhdmi_dig_playback_pcm_open,
.close = nvhdmi_dig_playback_pcm_close_8ch,
.channels_min = 2,
.channels_max = 2,
.nid = Nv_Master_Convert_nid,
- .rates = SNDRV_PCM_RATE_48000,
- .maxbps = 16,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SUPPORTED_RATES,
+ .maxbps = SUPPORTED_MAXBPS,
+ .formats = SUPPORTED_FORMATS,
.ops = {
.open = nvhdmi_dig_playback_pcm_open,
.close = nvhdmi_dig_playback_pcm_close_2ch,
struct snd_kcontrol_new *cap_mixer; /* capture mixer */
unsigned int beep_amp; /* beep amp value, set via set_beep_amp() */
- const struct hda_verb *init_verbs[5]; /* initialization verbs
+ const struct hda_verb *init_verbs[10]; /* initialization verbs
* don't forget NULL
* termination!
*/
STAC_D965_5ST_NO_FP,
STAC_DELL_3ST,
STAC_DELL_BIOS,
+ STAC_927X_VOLKNOB,
STAC_927X_MODELS
};
{}
};
+static struct hda_verb dell_3st_core_init[] = {
+ /* don't set delta bit */
+ {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f},
+ /* unmute node 0x1b */
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* select node 0x03 as DAC */
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {}
+};
+
static struct hda_verb stac927x_core_init[] = {
/* set master volume and direct control */
{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
{}
};
+static struct hda_verb stac927x_volknob_core_init[] = {
+ /* don't set delta bit */
+ {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f},
+ /* enable analog pc beep path */
+ {0x01, AC_VERB_SET_DIGI_CONVERT_2, 1 << 5},
+ {}
+};
+
static struct hda_verb stac9205_core_init[] = {
/* set master volume and direct control */
{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
[STAC_D965_5ST_NO_FP] = d965_5st_no_fp_pin_configs,
[STAC_DELL_3ST] = dell_3st_pin_configs,
[STAC_DELL_BIOS] = NULL,
+ [STAC_927X_VOLKNOB] = NULL,
};
static const char *stac927x_models[STAC_927X_MODELS] = {
[STAC_D965_5ST_NO_FP] = "5stack-no-fp",
[STAC_DELL_3ST] = "dell-3stack",
[STAC_DELL_BIOS] = "dell-bios",
+ [STAC_927X_VOLKNOB] = "volknob",
};
static struct snd_pci_quirk stac927x_cfg_tbl[] = {
"Intel D965", STAC_D965_5ST),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500,
"Intel D965", STAC_D965_5ST),
+ /* volume-knob fixes */
+ SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB),
{} /* terminator */
};
spec->dmic_nids = stac927x_dmic_nids;
spec->num_dmics = STAC927X_NUM_DMICS;
- spec->init = d965_core_init;
+ spec->init = dell_3st_core_init;
spec->dmux_nids = stac927x_dmux_nids;
spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids);
break;
+ case STAC_927X_VOLKNOB:
+ spec->num_dmics = 0;
+ spec->init = stac927x_volknob_core_init;
+ break;
default:
spec->num_dmics = 0;
spec->init = stac927x_core_init;
/* only use basic functionality for now */
- ice->num_total_dacs = 2; /* only PSDOUT0 is connected */
+ /* VT1616 6ch codec connected to PSDOUT0 using packed mode */
+ ice->num_total_dacs = 6;
ice->num_total_adcs = 2;
- /* Chaintech AV-710 has another codecs, which need initialization */
- /* initialize WM8728 codec */
+ /* Chaintech AV-710 has another WM8728 codec connected to PSDOUT4
+ (shared with the SPDIF output). Mixer control for this codec
+ is not yet supported. */
if (ice->eeprom.subvendor == VT1724_SUBDEVICE_AV710) {
for (i = 0; i < ARRAY_SIZE(wm_inits); i += 2)
wm_put(ice, wm_inits[i], wm_inits[i+1]);
(inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) {
/* running? we cannot change the rate now... */
spin_unlock_irqrestore(&ice->reg_lock, flags);
- return -EBUSY;
+ return ((rate == ice->cur_rate) && !force) ? 0 : -EBUSY;
}
if (!force && is_pro_rate_locked(ice)) {
spin_unlock_irqrestore(&ice->reg_lock, flags);