--- /dev/null
- scan->good_CRC_th = 0;
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/etherdevice.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+#include "iwl-agn-hw.h"
+#include "iwl-agn.h"
+
+static inline u32 iwlagn_get_scd_ssn(struct iwl5000_tx_resp *tx_resp)
+{
+ return le32_to_cpup((__le32 *)&tx_resp->status +
+ tx_resp->frame_count) & MAX_SN;
+}
+
+static int iwlagn_tx_status_reply_tx(struct iwl_priv *priv,
+ struct iwl_ht_agg *agg,
+ struct iwl5000_tx_resp *tx_resp,
+ int txq_id, u16 start_idx)
+{
+ u16 status;
+ struct agg_tx_status *frame_status = &tx_resp->status;
+ struct ieee80211_tx_info *info = NULL;
+ struct ieee80211_hdr *hdr = NULL;
+ u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
+ int i, sh, idx;
+ u16 seq;
+
+ if (agg->wait_for_ba)
+ IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
+
+ agg->frame_count = tx_resp->frame_count;
+ agg->start_idx = start_idx;
+ agg->rate_n_flags = rate_n_flags;
+ agg->bitmap = 0;
+
+ /* # frames attempted by Tx command */
+ if (agg->frame_count == 1) {
+ /* Only one frame was attempted; no block-ack will arrive */
+ status = le16_to_cpu(frame_status[0].status);
+ idx = start_idx;
+
+ /* FIXME: code repetition */
+ IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
+ agg->frame_count, agg->start_idx, idx);
+
+ info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+ info->flags |= iwl_tx_status_to_mac80211(status);
+ iwlagn_hwrate_to_tx_control(priv, rate_n_flags, info);
+
+ /* FIXME: code repetition end */
+
+ IWL_DEBUG_TX_REPLY(priv, "1 Frame 0x%x failure :%d\n",
+ status & 0xff, tx_resp->failure_frame);
+ IWL_DEBUG_TX_REPLY(priv, "Rate Info rate_n_flags=%x\n", rate_n_flags);
+
+ agg->wait_for_ba = 0;
+ } else {
+ /* Two or more frames were attempted; expect block-ack */
+ u64 bitmap = 0;
+ int start = agg->start_idx;
+
+ /* Construct bit-map of pending frames within Tx window */
+ for (i = 0; i < agg->frame_count; i++) {
+ u16 sc;
+ status = le16_to_cpu(frame_status[i].status);
+ seq = le16_to_cpu(frame_status[i].sequence);
+ idx = SEQ_TO_INDEX(seq);
+ txq_id = SEQ_TO_QUEUE(seq);
+
+ if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
+ AGG_TX_STATE_ABORT_MSK))
+ continue;
+
+ IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
+ agg->frame_count, txq_id, idx);
+
+ hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
+ if (!hdr) {
+ IWL_ERR(priv,
+ "BUG_ON idx doesn't point to valid skb"
+ " idx=%d, txq_id=%d\n", idx, txq_id);
+ return -1;
+ }
+
+ sc = le16_to_cpu(hdr->seq_ctrl);
+ if (idx != (SEQ_TO_SN(sc) & 0xff)) {
+ IWL_ERR(priv,
+ "BUG_ON idx doesn't match seq control"
+ " idx=%d, seq_idx=%d, seq=%d\n",
+ idx, SEQ_TO_SN(sc),
+ hdr->seq_ctrl);
+ return -1;
+ }
+
+ IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
+ i, idx, SEQ_TO_SN(sc));
+
+ sh = idx - start;
+ if (sh > 64) {
+ sh = (start - idx) + 0xff;
+ bitmap = bitmap << sh;
+ sh = 0;
+ start = idx;
+ } else if (sh < -64)
+ sh = 0xff - (start - idx);
+ else if (sh < 0) {
+ sh = start - idx;
+ start = idx;
+ bitmap = bitmap << sh;
+ sh = 0;
+ }
+ bitmap |= 1ULL << sh;
+ IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
+ start, (unsigned long long)bitmap);
+ }
+
+ agg->bitmap = bitmap;
+ agg->start_idx = start;
+ IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
+ agg->frame_count, agg->start_idx,
+ (unsigned long long)agg->bitmap);
+
+ if (bitmap)
+ agg->wait_for_ba = 1;
+ }
+ return 0;
+}
+
+void iwl_check_abort_status(struct iwl_priv *priv,
+ u8 frame_count, u32 status)
+{
+ if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
+ IWL_ERR(priv, "TODO: Implement Tx flush command!!!\n");
+ }
+}
+
+static void iwlagn_rx_reply_tx(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ u16 sequence = le16_to_cpu(pkt->hdr.sequence);
+ int txq_id = SEQ_TO_QUEUE(sequence);
+ int index = SEQ_TO_INDEX(sequence);
+ struct iwl_tx_queue *txq = &priv->txq[txq_id];
+ struct ieee80211_tx_info *info;
+ struct iwl5000_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
+ u32 status = le16_to_cpu(tx_resp->status.status);
+ int tid;
+ int sta_id;
+ int freed;
+
+ if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
+ IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
+ "is out of range [0-%d] %d %d\n", txq_id,
+ index, txq->q.n_bd, txq->q.write_ptr,
+ txq->q.read_ptr);
+ return;
+ }
+
+ info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb[0]);
+ memset(&info->status, 0, sizeof(info->status));
+
+ tid = (tx_resp->ra_tid & IWL50_TX_RES_TID_MSK) >> IWL50_TX_RES_TID_POS;
+ sta_id = (tx_resp->ra_tid & IWL50_TX_RES_RA_MSK) >> IWL50_TX_RES_RA_POS;
+
+ if (txq->sched_retry) {
+ const u32 scd_ssn = iwlagn_get_scd_ssn(tx_resp);
+ struct iwl_ht_agg *agg = NULL;
+
+ agg = &priv->stations[sta_id].tid[tid].agg;
+
+ iwlagn_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
+
+ /* check if BAR is needed */
+ if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
+ info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
+
+ if (txq->q.read_ptr != (scd_ssn & 0xff)) {
+ index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
+ IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim "
+ "scd_ssn=%d idx=%d txq=%d swq=%d\n",
+ scd_ssn , index, txq_id, txq->swq_id);
+
+ freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
+
+ if (priv->mac80211_registered &&
+ (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
+ (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
+ if (agg->state == IWL_AGG_OFF)
+ iwl_wake_queue(priv, txq_id);
+ else
+ iwl_wake_queue(priv, txq->swq_id);
+ }
+ }
+ } else {
+ BUG_ON(txq_id != txq->swq_id);
+
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags |= iwl_tx_status_to_mac80211(status);
+ iwlagn_hwrate_to_tx_control(priv,
+ le32_to_cpu(tx_resp->rate_n_flags),
+ info);
+
+ IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) rate_n_flags "
+ "0x%x retries %d\n",
+ txq_id,
+ iwl_get_tx_fail_reason(status), status,
+ le32_to_cpu(tx_resp->rate_n_flags),
+ tx_resp->failure_frame);
+
+ freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
+
+ if (priv->mac80211_registered &&
+ (iwl_queue_space(&txq->q) > txq->q.low_mark))
+ iwl_wake_queue(priv, txq_id);
+ }
+
+ iwlagn_txq_check_empty(priv, sta_id, tid, txq_id);
+
+ iwl_check_abort_status(priv, tx_resp->frame_count, status);
+}
+
+void iwlagn_rx_handler_setup(struct iwl_priv *priv)
+{
+ /* init calibration handlers */
+ priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] =
+ iwlagn_rx_calib_result;
+ priv->rx_handlers[CALIBRATION_COMPLETE_NOTIFICATION] =
+ iwlagn_rx_calib_complete;
+ priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx;
+}
+
+void iwlagn_setup_deferred_work(struct iwl_priv *priv)
+{
+ /* in agn, the tx power calibration is done in uCode */
+ priv->disable_tx_power_cal = 1;
+}
+
+int iwlagn_hw_valid_rtc_data_addr(u32 addr)
+{
+ return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&
+ (addr < IWLAGN_RTC_DATA_UPPER_BOUND);
+}
+
+int iwlagn_send_tx_power(struct iwl_priv *priv)
+{
+ struct iwl5000_tx_power_dbm_cmd tx_power_cmd;
+ u8 tx_ant_cfg_cmd;
+
+ /* half dBm need to multiply */
+ tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
+
+ if (priv->tx_power_lmt_in_half_dbm &&
+ priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) {
+ /*
+ * For the newer devices which using enhanced/extend tx power
+ * table in EEPROM, the format is in half dBm. driver need to
+ * convert to dBm format before report to mac80211.
+ * By doing so, there is a possibility of 1/2 dBm resolution
+ * lost. driver will perform "round-up" operation before
+ * reporting, but it will cause 1/2 dBm tx power over the
+ * regulatory limit. Perform the checking here, if the
+ * "tx_power_user_lmt" is higher than EEPROM value (in
+ * half-dBm format), lower the tx power based on EEPROM
+ */
+ tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm;
+ }
+ tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED;
+ tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO;
+
+ if (IWL_UCODE_API(priv->ucode_ver) == 1)
+ tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1;
+ else
+ tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;
+
+ return iwl_send_cmd_pdu_async(priv, tx_ant_cfg_cmd,
+ sizeof(tx_power_cmd), &tx_power_cmd,
+ NULL);
+}
+
+void iwlagn_temperature(struct iwl_priv *priv)
+{
+ /* store temperature from statistics (in Celsius) */
+ priv->temperature = le32_to_cpu(priv->statistics.general.temperature);
+ iwl_tt_handler(priv);
+}
+
+u16 iwlagn_eeprom_calib_version(struct iwl_priv *priv)
+{
+ struct iwl_eeprom_calib_hdr {
+ u8 version;
+ u8 pa_type;
+ u16 voltage;
+ } *hdr;
+
+ hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
+ EEPROM_CALIB_ALL);
+ return hdr->version;
+
+}
+
+/*
+ * EEPROM
+ */
+static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address)
+{
+ u16 offset = 0;
+
+ if ((address & INDIRECT_ADDRESS) == 0)
+ return address;
+
+ switch (address & INDIRECT_TYPE_MSK) {
+ case INDIRECT_HOST:
+ offset = iwl_eeprom_query16(priv, EEPROM_LINK_HOST);
+ break;
+ case INDIRECT_GENERAL:
+ offset = iwl_eeprom_query16(priv, EEPROM_LINK_GENERAL);
+ break;
+ case INDIRECT_REGULATORY:
+ offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
+ break;
+ case INDIRECT_CALIBRATION:
+ offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
+ break;
+ case INDIRECT_PROCESS_ADJST:
+ offset = iwl_eeprom_query16(priv, EEPROM_LINK_PROCESS_ADJST);
+ break;
+ case INDIRECT_OTHERS:
+ offset = iwl_eeprom_query16(priv, EEPROM_LINK_OTHERS);
+ break;
+ default:
+ IWL_ERR(priv, "illegal indirect type: 0x%X\n",
+ address & INDIRECT_TYPE_MSK);
+ break;
+ }
+
+ /* translate the offset from words to byte */
+ return (address & ADDRESS_MSK) + (offset << 1);
+}
+
+const u8 *iwlagn_eeprom_query_addr(const struct iwl_priv *priv,
+ size_t offset)
+{
+ u32 address = eeprom_indirect_address(priv, offset);
+ BUG_ON(address >= priv->cfg->eeprom_size);
+ return &priv->eeprom[address];
+}
+
+struct iwl_mod_params iwlagn_mod_params = {
+ .amsdu_size_8K = 1,
+ .restart_fw = 1,
+ /* the rest are 0 by default */
+};
+
+void iwlagn_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ unsigned long flags;
+ int i;
+ spin_lock_irqsave(&rxq->lock, flags);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+ /* In the reset function, these buffers may have been allocated
+ * to an SKB, so we need to unmap and free potential storage */
+ if (rxq->pool[i].page != NULL) {
+ pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+ PAGE_SIZE << priv->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ __iwl_free_pages(priv, rxq->pool[i].page);
+ rxq->pool[i].page = NULL;
+ }
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+ }
+
+ for (i = 0; i < RX_QUEUE_SIZE; i++)
+ rxq->queue[i] = NULL;
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->write_actual = 0;
+ rxq->free_count = 0;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+}
+
+int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ u32 rb_size;
+ const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
+ u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
+
+ if (!priv->cfg->use_isr_legacy)
+ rb_timeout = RX_RB_TIMEOUT;
+
+ if (priv->cfg->mod_params->amsdu_size_8K)
+ rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
+ else
+ rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
+
+ /* Stop Rx DMA */
+ iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
+
+ /* Reset driver's Rx queue write index */
+ iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
+
+ /* Tell device where to find RBD circular buffer in DRAM */
+ iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
+ (u32)(rxq->dma_addr >> 8));
+
+ /* Tell device where in DRAM to update its Rx status */
+ iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
+ rxq->rb_stts_dma >> 4);
+
+ /* Enable Rx DMA
+ * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
+ * the credit mechanism in 5000 HW RX FIFO
+ * Direct rx interrupts to hosts
+ * Rx buffer size 4 or 8k
+ * RB timeout 0x10
+ * 256 RBDs
+ */
+ iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
+ FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
+ FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
+ FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
+ FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
+ rb_size|
+ (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
+ (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
+
+ /* Set interrupt coalescing timer to default (2048 usecs) */
+ iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
+
+ return 0;
+}
+
+int iwlagn_hw_nic_init(struct iwl_priv *priv)
+{
+ unsigned long flags;
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ int ret;
+
+ /* nic_init */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->cfg->ops->lib->apm_ops.init(priv);
+
+ /* Set interrupt coalescing calibration timer to default (512 usecs) */
+ iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
+
+ priv->cfg->ops->lib->apm_ops.config(priv);
+
+ /* Allocate the RX queue, or reset if it is already allocated */
+ if (!rxq->bd) {
+ ret = iwl_rx_queue_alloc(priv);
+ if (ret) {
+ IWL_ERR(priv, "Unable to initialize Rx queue\n");
+ return -ENOMEM;
+ }
+ } else
+ iwlagn_rx_queue_reset(priv, rxq);
+
+ iwlagn_rx_replenish(priv);
+
+ iwlagn_rx_init(priv, rxq);
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ rxq->need_update = 1;
+ iwl_rx_queue_update_write_ptr(priv, rxq);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* Allocate or reset and init all Tx and Command queues */
+ if (!priv->txq) {
+ ret = iwlagn_txq_ctx_alloc(priv);
+ if (ret)
+ return ret;
+ } else
+ iwlagn_txq_ctx_reset(priv);
+
+ set_bit(STATUS_INIT, &priv->status);
+
+ return 0;
+}
+
+/**
+ * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32 iwlagn_dma_addr2rbd_ptr(struct iwl_priv *priv,
+ dma_addr_t dma_addr)
+{
+ return cpu_to_le32((u32)(dma_addr >> 8));
+}
+
+/**
+ * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' index forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+void iwlagn_rx_queue_restock(struct iwl_priv *priv)
+{
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ struct list_head *element;
+ struct iwl_rx_mem_buffer *rxb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
+ /* The overwritten rxb must be a used one */
+ rxb = rxq->queue[rxq->write];
+ BUG_ON(rxb && rxb->page);
+
+ /* Get next free Rx buffer, remove from free list */
+ element = rxq->rx_free.next;
+ rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+ list_del(element);
+
+ /* Point to Rx buffer via next RBD in circular buffer */
+ rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(priv,
+ rxb->page_dma);
+ rxq->queue[rxq->write] = rxb;
+ rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+ rxq->free_count--;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ /* If the pre-allocated buffer pool is dropping low, schedule to
+ * refill it */
+ if (rxq->free_count <= RX_LOW_WATERMARK)
+ queue_work(priv->workqueue, &priv->rx_replenish);
+
+
+ /* If we've added more space for the firmware to place data, tell it.
+ * Increment device's write pointer in multiples of 8. */
+ if (rxq->write_actual != (rxq->write & ~0x7)) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ rxq->need_update = 1;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ iwl_rx_queue_update_write_ptr(priv, rxq);
+ }
+}
+
+/**
+ * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via iwl_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority)
+{
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ struct list_head *element;
+ struct iwl_rx_mem_buffer *rxb;
+ struct page *page;
+ unsigned long flags;
+ gfp_t gfp_mask = priority;
+
+ while (1) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ gfp_mask |= __GFP_NOWARN;
+
+ if (priv->hw_params.rx_page_order > 0)
+ gfp_mask |= __GFP_COMP;
+
+ /* Alloc a new receive buffer */
+ page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
+ if (!page) {
+ if (net_ratelimit())
+ IWL_DEBUG_INFO(priv, "alloc_pages failed, "
+ "order: %d\n",
+ priv->hw_params.rx_page_order);
+
+ if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ net_ratelimit())
+ IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
+ /* We don't reschedule replenish work here -- we will
+ * call the restock method and if it still needs
+ * more buffers it will schedule replenish */
+ return;
+ }
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ __free_pages(page, priv->hw_params.rx_page_order);
+ return;
+ }
+ element = rxq->rx_used.next;
+ rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+ list_del(element);
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ BUG_ON(rxb->page);
+ rxb->page = page;
+ /* Get physical address of the RB */
+ rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
+ PAGE_SIZE << priv->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ /* dma address must be no more than 36 bits */
+ BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
+ /* and also 256 byte aligned! */
+ BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ priv->alloc_rxb_page++;
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ }
+}
+
+void iwlagn_rx_replenish(struct iwl_priv *priv)
+{
+ unsigned long flags;
+
+ iwlagn_rx_allocate(priv, GFP_KERNEL);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ iwlagn_rx_queue_restock(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+void iwlagn_rx_replenish_now(struct iwl_priv *priv)
+{
+ iwlagn_rx_allocate(priv, GFP_ATOMIC);
+
+ iwlagn_rx_queue_restock(priv);
+}
+
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+void iwlagn_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ int i;
+ for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+ if (rxq->pool[i].page != NULL) {
+ pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+ PAGE_SIZE << priv->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ __iwl_free_pages(priv, rxq->pool[i].page);
+ rxq->pool[i].page = NULL;
+ }
+ }
+
+ dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+ rxq->dma_addr);
+ dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
+ rxq->rb_stts, rxq->rb_stts_dma);
+ rxq->bd = NULL;
+ rxq->rb_stts = NULL;
+}
+
+int iwlagn_rxq_stop(struct iwl_priv *priv)
+{
+
+ /* stop Rx DMA */
+ iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
+ iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
+ FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
+
+ return 0;
+}
+
+int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
+{
+ int idx = 0;
+ int band_offset = 0;
+
+ /* HT rate format: mac80211 wants an MCS number, which is just LSB */
+ if (rate_n_flags & RATE_MCS_HT_MSK) {
+ idx = (rate_n_flags & 0xff);
+ return idx;
+ /* Legacy rate format, search for match in table */
+ } else {
+ if (band == IEEE80211_BAND_5GHZ)
+ band_offset = IWL_FIRST_OFDM_RATE;
+ for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
+ if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
+ return idx - band_offset;
+ }
+
+ return -1;
+}
+
+/* Calc max signal level (dBm) among 3 possible receivers */
+static inline int iwlagn_calc_rssi(struct iwl_priv *priv,
+ struct iwl_rx_phy_res *rx_resp)
+{
+ return priv->cfg->ops->utils->calc_rssi(priv, rx_resp);
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+/**
+ * iwlagn_dbg_report_frame - dump frame to syslog during debug sessions
+ *
+ * You may hack this function to show different aspects of received frames,
+ * including selective frame dumps.
+ * group100 parameter selects whether to show 1 out of 100 good data frames.
+ * All beacon and probe response frames are printed.
+ */
+static void iwlagn_dbg_report_frame(struct iwl_priv *priv,
+ struct iwl_rx_phy_res *phy_res, u16 length,
+ struct ieee80211_hdr *header, int group100)
+{
+ u32 to_us;
+ u32 print_summary = 0;
+ u32 print_dump = 0; /* set to 1 to dump all frames' contents */
+ u32 hundred = 0;
+ u32 dataframe = 0;
+ __le16 fc;
+ u16 seq_ctl;
+ u16 channel;
+ u16 phy_flags;
+ u32 rate_n_flags;
+ u32 tsf_low;
+ int rssi;
+
+ if (likely(!(iwl_get_debug_level(priv) & IWL_DL_RX)))
+ return;
+
+ /* MAC header */
+ fc = header->frame_control;
+ seq_ctl = le16_to_cpu(header->seq_ctrl);
+
+ /* metadata */
+ channel = le16_to_cpu(phy_res->channel);
+ phy_flags = le16_to_cpu(phy_res->phy_flags);
+ rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
+
+ /* signal statistics */
+ rssi = iwlagn_calc_rssi(priv, phy_res);
+ tsf_low = le64_to_cpu(phy_res->timestamp) & 0x0ffffffff;
+
+ to_us = !compare_ether_addr(header->addr1, priv->mac_addr);
+
+ /* if data frame is to us and all is good,
+ * (optionally) print summary for only 1 out of every 100 */
+ if (to_us && (fc & ~cpu_to_le16(IEEE80211_FCTL_PROTECTED)) ==
+ cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FTYPE_DATA)) {
+ dataframe = 1;
+ if (!group100)
+ print_summary = 1; /* print each frame */
+ else if (priv->framecnt_to_us < 100) {
+ priv->framecnt_to_us++;
+ print_summary = 0;
+ } else {
+ priv->framecnt_to_us = 0;
+ print_summary = 1;
+ hundred = 1;
+ }
+ } else {
+ /* print summary for all other frames */
+ print_summary = 1;
+ }
+
+ if (print_summary) {
+ char *title;
+ int rate_idx;
+ u32 bitrate;
+
+ if (hundred)
+ title = "100Frames";
+ else if (ieee80211_has_retry(fc))
+ title = "Retry";
+ else if (ieee80211_is_assoc_resp(fc))
+ title = "AscRsp";
+ else if (ieee80211_is_reassoc_resp(fc))
+ title = "RasRsp";
+ else if (ieee80211_is_probe_resp(fc)) {
+ title = "PrbRsp";
+ print_dump = 1; /* dump frame contents */
+ } else if (ieee80211_is_beacon(fc)) {
+ title = "Beacon";
+ print_dump = 1; /* dump frame contents */
+ } else if (ieee80211_is_atim(fc))
+ title = "ATIM";
+ else if (ieee80211_is_auth(fc))
+ title = "Auth";
+ else if (ieee80211_is_deauth(fc))
+ title = "DeAuth";
+ else if (ieee80211_is_disassoc(fc))
+ title = "DisAssoc";
+ else
+ title = "Frame";
+
+ rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags);
+ if (unlikely((rate_idx < 0) || (rate_idx >= IWL_RATE_COUNT))) {
+ bitrate = 0;
+ WARN_ON_ONCE(1);
+ } else {
+ bitrate = iwl_rates[rate_idx].ieee / 2;
+ }
+
+ /* print frame summary.
+ * MAC addresses show just the last byte (for brevity),
+ * but you can hack it to show more, if you'd like to. */
+ if (dataframe)
+ IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
+ "len=%u, rssi=%d, chnl=%d, rate=%u,\n",
+ title, le16_to_cpu(fc), header->addr1[5],
+ length, rssi, channel, bitrate);
+ else {
+ /* src/dst addresses assume managed mode */
+ IWL_DEBUG_RX(priv, "%s: 0x%04x, dst=0x%02x, src=0x%02x, "
+ "len=%u, rssi=%d, tim=%lu usec, "
+ "phy=0x%02x, chnl=%d\n",
+ title, le16_to_cpu(fc), header->addr1[5],
+ header->addr3[5], length, rssi,
+ tsf_low - priv->scan_start_tsf,
+ phy_flags, channel);
+ }
+ }
+ if (print_dump)
+ iwl_print_hex_dump(priv, IWL_DL_RX, header, length);
+}
+#endif
+
+static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
+{
+ u32 decrypt_out = 0;
+
+ if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
+ RX_RES_STATUS_STATION_FOUND)
+ decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
+ RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
+
+ decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
+
+ /* packet was not encrypted */
+ if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
+ RX_RES_STATUS_SEC_TYPE_NONE)
+ return decrypt_out;
+
+ /* packet was encrypted with unknown alg */
+ if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
+ RX_RES_STATUS_SEC_TYPE_ERR)
+ return decrypt_out;
+
+ /* decryption was not done in HW */
+ if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
+ RX_MPDU_RES_STATUS_DEC_DONE_MSK)
+ return decrypt_out;
+
+ switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
+
+ case RX_RES_STATUS_SEC_TYPE_CCMP:
+ /* alg is CCM: check MIC only */
+ if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
+ /* Bad MIC */
+ decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
+ else
+ decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
+
+ break;
+
+ case RX_RES_STATUS_SEC_TYPE_TKIP:
+ if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
+ /* Bad TTAK */
+ decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
+ break;
+ }
+ /* fall through if TTAK OK */
+ default:
+ if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
+ decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
+ else
+ decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
+ break;
+ };
+
+ IWL_DEBUG_RX(priv, "decrypt_in:0x%x decrypt_out = 0x%x\n",
+ decrypt_in, decrypt_out);
+
+ return decrypt_out;
+}
+
+static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv,
+ struct ieee80211_hdr *hdr,
+ u16 len,
+ u32 ampdu_status,
+ struct iwl_rx_mem_buffer *rxb,
+ struct ieee80211_rx_status *stats)
+{
+ struct sk_buff *skb;
+ __le16 fc = hdr->frame_control;
+
+ /* We only process data packets if the interface is open */
+ if (unlikely(!priv->is_open)) {
+ IWL_DEBUG_DROP_LIMIT(priv,
+ "Dropping packet while interface is not open.\n");
+ return;
+ }
+
+ /* In case of HW accelerated crypto and bad decryption, drop */
+ if (!priv->cfg->mod_params->sw_crypto &&
+ iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
+ return;
+
+ skb = dev_alloc_skb(128);
+ if (!skb) {
+ IWL_ERR(priv, "dev_alloc_skb failed\n");
+ return;
+ }
+
+ skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
+
+ iwl_update_stats(priv, false, fc, len);
+ memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+ ieee80211_rx(priv->hw, skb);
+ priv->alloc_rxb_page--;
+ rxb->page = NULL;
+}
+
+/* Called for REPLY_RX (legacy ABG frames), or
+ * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
+void iwlagn_rx_reply_rx(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ struct ieee80211_hdr *header;
+ struct ieee80211_rx_status rx_status;
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ struct iwl_rx_phy_res *phy_res;
+ __le32 rx_pkt_status;
+ struct iwl4965_rx_mpdu_res_start *amsdu;
+ u32 len;
+ u32 ampdu_status;
+ u32 rate_n_flags;
+
+ /**
+ * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
+ * REPLY_RX: physical layer info is in this buffer
+ * REPLY_RX_MPDU_CMD: physical layer info was sent in separate
+ * command and cached in priv->last_phy_res
+ *
+ * Here we set up local variables depending on which command is
+ * received.
+ */
+ if (pkt->hdr.cmd == REPLY_RX) {
+ phy_res = (struct iwl_rx_phy_res *)pkt->u.raw;
+ header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
+ + phy_res->cfg_phy_cnt);
+
+ len = le16_to_cpu(phy_res->byte_count);
+ rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
+ phy_res->cfg_phy_cnt + len);
+ ampdu_status = le32_to_cpu(rx_pkt_status);
+ } else {
+ if (!priv->_agn.last_phy_res_valid) {
+ IWL_ERR(priv, "MPDU frame without cached PHY data\n");
+ return;
+ }
+ phy_res = &priv->_agn.last_phy_res;
+ amsdu = (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
+ header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
+ len = le16_to_cpu(amsdu->byte_count);
+ rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
+ ampdu_status = iwlagn_translate_rx_status(priv,
+ le32_to_cpu(rx_pkt_status));
+ }
+
+ if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
+ IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
+ phy_res->cfg_phy_cnt);
+ return;
+ }
+
+ if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
+ !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
+ IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
+ le32_to_cpu(rx_pkt_status));
+ return;
+ }
+
+ /* This will be used in several places later */
+ rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
+
+ /* rx_status carries information about the packet to mac80211 */
+ rx_status.mactime = le64_to_cpu(phy_res->timestamp);
+ rx_status.freq =
+ ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel));
+ rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
+ IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+ rx_status.rate_idx =
+ iwlagn_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
+ rx_status.flag = 0;
+
+ /* TSF isn't reliable. In order to allow smooth user experience,
+ * this W/A doesn't propagate it to the mac80211 */
+ /*rx_status.flag |= RX_FLAG_TSFT;*/
+
+ priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
+
+ /* Find max signal strength (dBm) among 3 antenna/receiver chains */
+ rx_status.signal = iwlagn_calc_rssi(priv, phy_res);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ /* Set "1" to report good data frames in groups of 100 */
+ if (unlikely(iwl_get_debug_level(priv) & IWL_DL_RX))
+ iwlagn_dbg_report_frame(priv, phy_res, len, header, 1);
+#endif
+ iwl_dbg_log_rx_data_frame(priv, len, header);
+ IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n",
+ rx_status.signal, (unsigned long long)rx_status.mactime);
+
+ /*
+ * "antenna number"
+ *
+ * It seems that the antenna field in the phy flags value
+ * is actually a bit field. This is undefined by radiotap,
+ * it wants an actual antenna number but I always get "7"
+ * for most legacy frames I receive indicating that the
+ * same frame was received on all three RX chains.
+ *
+ * I think this field should be removed in favor of a
+ * new 802.11n radiotap field "RX chains" that is defined
+ * as a bitmask.
+ */
+ rx_status.antenna =
+ (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
+ >> RX_RES_PHY_FLAGS_ANTENNA_POS;
+
+ /* set the preamble flag if appropriate */
+ if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
+
+ /* Set up the HT phy flags */
+ if (rate_n_flags & RATE_MCS_HT_MSK)
+ rx_status.flag |= RX_FLAG_HT;
+ if (rate_n_flags & RATE_MCS_HT40_MSK)
+ rx_status.flag |= RX_FLAG_40MHZ;
+ if (rate_n_flags & RATE_MCS_SGI_MSK)
+ rx_status.flag |= RX_FLAG_SHORT_GI;
+
+ iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status,
+ rxb, &rx_status);
+}
+
+/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
+ * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
+void iwlagn_rx_reply_rx_phy(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = rxb_addr(rxb);
+ priv->_agn.last_phy_res_valid = true;
+ memcpy(&priv->_agn.last_phy_res, pkt->u.raw,
+ sizeof(struct iwl_rx_phy_res));
+}
+
+static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ struct iwl_scan_channel *scan_ch)
+{
+ const struct ieee80211_supported_band *sband;
+ const struct iwl_channel_info *ch_info;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int i, added = 0;
+ u16 channel = 0;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband) {
+ IWL_ERR(priv, "invalid band\n");
+ return added;
+ }
+
+ active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+ /* only scan single channel, good enough to reset the RF */
+ /* pick the first valid not in-use channel */
+ if (band == IEEE80211_BAND_5GHZ) {
+ for (i = 14; i < priv->channel_count; i++) {
+ if (priv->channel_info[i].channel !=
+ le16_to_cpu(priv->staging_rxon.channel)) {
+ channel = priv->channel_info[i].channel;
+ ch_info = iwl_get_channel_info(priv,
+ band, channel);
+ if (is_channel_valid(ch_info))
+ break;
+ }
+ }
+ } else {
+ for (i = 0; i < 14; i++) {
+ if (priv->channel_info[i].channel !=
+ le16_to_cpu(priv->staging_rxon.channel)) {
+ channel =
+ priv->channel_info[i].channel;
+ ch_info = iwl_get_channel_info(priv,
+ band, channel);
+ if (is_channel_valid(ch_info))
+ break;
+ }
+ }
+ }
+ if (channel) {
+ scan_ch->channel = cpu_to_le16(channel);
+ scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+ /* Set txpower levels to defaults */
+ scan_ch->dsp_atten = 110;
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+ added++;
+ } else
+ IWL_ERR(priv, "no valid channel found\n");
+ return added;
+}
+
+static int iwl_get_channels_for_scan(struct iwl_priv *priv,
+ enum ieee80211_band band,
+ u8 is_active, u8 n_probes,
+ struct iwl_scan_channel *scan_ch)
+{
+ struct ieee80211_channel *chan;
+ const struct ieee80211_supported_band *sband;
+ const struct iwl_channel_info *ch_info;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added, i;
+ u16 channel;
+
+ sband = iwl_get_hw_mode(priv, band);
+ if (!sband)
+ return 0;
+
+ active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
+ passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+ for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
+ chan = priv->scan_request->channels[i];
+
+ if (chan->band != band)
+ continue;
+
+ channel = ieee80211_frequency_to_channel(chan->center_freq);
+ scan_ch->channel = cpu_to_le16(channel);
+
+ ch_info = iwl_get_channel_info(priv, band, channel);
+ if (!is_channel_valid(ch_info)) {
+ IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
+ channel);
+ continue;
+ }
+
+ if (!is_active || is_channel_passive(ch_info) ||
+ (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+ else
+ scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
+
+ if (n_probes)
+ scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
+
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+ /* Set txpower levels to defaults */
+ scan_ch->dsp_atten = 110;
+
+ /* NOTE: if we were doing 6Mb OFDM for scans we'd use
+ * power level:
+ * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+ */
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+ IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
+ channel, le32_to_cpu(scan_ch->type),
+ (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+ "ACTIVE" : "PASSIVE",
+ (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+ active_dwell : passive_dwell);
+
+ scan_ch++;
+ added++;
+ }
+
+ IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
+ return added;
+}
+
+void iwlagn_request_scan(struct iwl_priv *priv)
+{
+ struct iwl_host_cmd cmd = {
+ .id = REPLY_SCAN_CMD,
+ .len = sizeof(struct iwl_scan_cmd),
+ .flags = CMD_SIZE_HUGE,
+ };
+ struct iwl_scan_cmd *scan;
+ struct ieee80211_conf *conf = NULL;
+ u32 rate_flags = 0;
+ u16 cmd_len;
+ u16 rx_chain = 0;
+ enum ieee80211_band band;
+ u8 n_probes = 0;
+ u8 rx_ant = priv->hw_params.valid_rx_ant;
+ u8 rate;
+ bool is_active = false;
+ int chan_mod;
+ u8 active_chains;
+
+ conf = ieee80211_get_hw_conf(priv->hw);
+
+ cancel_delayed_work(&priv->scan_check);
+
+ if (!iwl_is_ready(priv)) {
+ IWL_WARN(priv, "request scan called when driver not ready.\n");
+ goto done;
+ }
+
+ /* Make sure the scan wasn't canceled before this queued work
+ * was given the chance to run... */
+ if (!test_bit(STATUS_SCANNING, &priv->status))
+ goto done;
+
+ /* This should never be called or scheduled if there is currently
+ * a scan active in the hardware. */
+ if (test_bit(STATUS_SCAN_HW, &priv->status)) {
+ IWL_DEBUG_INFO(priv, "Multiple concurrent scan requests in parallel. "
+ "Ignoring second request.\n");
+ goto done;
+ }
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
+ IWL_DEBUG_SCAN(priv, "Aborting scan due to device shutdown\n");
+ goto done;
+ }
+
+ if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
+ IWL_DEBUG_HC(priv, "Scan request while abort pending. Queuing.\n");
+ goto done;
+ }
+
+ if (iwl_is_rfkill(priv)) {
+ IWL_DEBUG_HC(priv, "Aborting scan due to RF Kill activation\n");
+ goto done;
+ }
+
+ if (!test_bit(STATUS_READY, &priv->status)) {
+ IWL_DEBUG_HC(priv, "Scan request while uninitialized. Queuing.\n");
+ goto done;
+ }
+
+ if (!priv->scan_cmd) {
+ priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) +
+ IWL_MAX_SCAN_SIZE, GFP_KERNEL);
+ if (!priv->scan_cmd) {
+ IWL_DEBUG_SCAN(priv,
+ "fail to allocate memory for scan\n");
+ goto done;
+ }
+ }
+ scan = priv->scan_cmd;
+ memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
+
+ scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+ scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+ if (iwl_is_associated(priv)) {
+ u16 interval = 0;
+ u32 extra;
+ u32 suspend_time = 100;
+ u32 scan_suspend_time = 100;
+ unsigned long flags;
+
+ IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
+ spin_lock_irqsave(&priv->lock, flags);
+ interval = priv->beacon_int;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ scan->suspend_time = 0;
+ scan->max_out_time = cpu_to_le32(200 * 1024);
+ if (!interval)
+ interval = suspend_time;
+
+ extra = (suspend_time / interval) << 22;
+ scan_suspend_time = (extra |
+ ((suspend_time % interval) * 1024));
+ scan->suspend_time = cpu_to_le32(scan_suspend_time);
+ IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
+ scan_suspend_time, interval);
+ }
+
+ if (priv->is_internal_short_scan) {
+ IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+ } else if (priv->scan_request->n_ssids) {
+ int i, p = 0;
+ IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+ for (i = 0; i < priv->scan_request->n_ssids; i++) {
+ /* always does wildcard anyway */
+ if (!priv->scan_request->ssids[i].ssid_len)
+ continue;
+ scan->direct_scan[p].id = WLAN_EID_SSID;
+ scan->direct_scan[p].len =
+ priv->scan_request->ssids[i].ssid_len;
+ memcpy(scan->direct_scan[p].ssid,
+ priv->scan_request->ssids[i].ssid,
+ priv->scan_request->ssids[i].ssid_len);
+ n_probes++;
+ p++;
+ }
+ is_active = true;
+ } else
+ IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
+
+ scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+ scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
+ scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+ switch (priv->scan_band) {
+ case IEEE80211_BAND_2GHZ:
+ scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+ chan_mod = le32_to_cpu(priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_MSK)
+ >> RXON_FLG_CHANNEL_MODE_POS;
+ if (chan_mod == CHANNEL_MODE_PURE_40) {
+ rate = IWL_RATE_6M_PLCP;
+ } else {
+ rate = IWL_RATE_1M_PLCP;
+ rate_flags = RATE_MCS_CCK_MSK;
+ }
- * If active scaning is requested but a certain channel
- * is marked passive, we can do active scanning if we
- * detect transmissions.
++ scan->good_CRC_th = IWL_GOOD_CRC_TH_DISABLED;
+ break;
+ case IEEE80211_BAND_5GHZ:
+ rate = IWL_RATE_6M_PLCP;
+ /*
- scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
++ * If active scanning is requested but a certain channel is
++ * marked passive, we can do active scanning if we detect
++ * transmissions.
++ *
++ * There is an issue with some firmware versions that triggers
++ * a sysassert on a "good CRC threshold" of zero (== disabled),
++ * on a radar channel even though this means that we should NOT
++ * send probes.
++ *
++ * The "good CRC threshold" is the number of frames that we
++ * need to receive during our dwell time on a channel before
++ * sending out probes -- setting this to a huge value will
++ * mean we never reach it, but at the same time work around
++ * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
++ * here instead of IWL_GOOD_CRC_TH_DISABLED.
+ */
++ scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
++ IWL_GOOD_CRC_TH_NEVER;
+ break;
+ default:
+ IWL_WARN(priv, "Invalid scan band count\n");
+ goto done;
+ }
+
+ band = priv->scan_band;
+
+ if (priv->cfg->scan_antennas[band])
+ rx_ant = priv->cfg->scan_antennas[band];
+
+ priv->scan_tx_ant[band] =
+ iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band]);
+ rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
+ scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
+
+ /* In power save mode use one chain, otherwise use all chains */
+ if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+ /* rx_ant has been set to all valid chains previously */
+ active_chains = rx_ant &
+ ((u8)(priv->chain_noise_data.active_chains));
+ if (!active_chains)
+ active_chains = rx_ant;
+
+ IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
+ priv->chain_noise_data.active_chains);
+
+ rx_ant = first_antenna(active_chains);
+ }
+ /* MIMO is not used here, but value is required */
+ rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+ rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+ scan->rx_chain = cpu_to_le16(rx_chain);
+ if (!priv->is_internal_short_scan) {
+ cmd_len = iwl_fill_probe_req(priv,
+ (struct ieee80211_mgmt *)scan->data,
+ priv->scan_request->ie,
+ priv->scan_request->ie_len,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan));
+ } else {
+ cmd_len = iwl_fill_probe_req(priv,
+ (struct ieee80211_mgmt *)scan->data,
+ NULL, 0,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan));
+
+ }
+ scan->tx_cmd.len = cpu_to_le16(cmd_len);
+
+ scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+ RXON_FILTER_BCON_AWARE_MSK);
+
+ if (priv->is_internal_short_scan) {
+ scan->channel_count =
+ iwl_get_single_channel_for_scan(priv, band,
+ (void *)&scan->data[le16_to_cpu(
+ scan->tx_cmd.len)]);
+ } else {
+ scan->channel_count =
+ iwl_get_channels_for_scan(priv, band,
+ is_active, n_probes,
+ (void *)&scan->data[le16_to_cpu(
+ scan->tx_cmd.len)]);
+ }
+ if (scan->channel_count == 0) {
+ IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
+ goto done;
+ }
+
+ cmd.len += le16_to_cpu(scan->tx_cmd.len) +
+ scan->channel_count * sizeof(struct iwl_scan_channel);
+ cmd.data = scan;
+ scan->len = cpu_to_le16(cmd.len);
+
+ set_bit(STATUS_SCAN_HW, &priv->status);
+ if (iwl_send_cmd_sync(priv, &cmd))
+ goto done;
+
+ queue_delayed_work(priv->workqueue, &priv->scan_check,
+ IWL_SCAN_CHECK_WATCHDOG);
+
+ return;
+
+ done:
+ /* Cannot perform scan. Make sure we clear scanning
+ * bits from status so next scan request can be performed.
+ * If we don't clear scanning status bit here all next scan
+ * will fail
+ */
+ clear_bit(STATUS_SCAN_HW, &priv->status);
+ clear_bit(STATUS_SCANNING, &priv->status);
+ /* inform mac80211 scan aborted */
+ queue_work(priv->workqueue, &priv->scan_completed);
+}
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff