V4L/DVB (4638): Basic DVB-T and analog TV support for the HVR1300.

This is the first in a series of patches to add full WinTV-HVR1300
support to Linux. This first patch will enable analog TV support
and DVB-T support. Later patches will add the hardware MPEG encoder
support.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 76b3092..b89fa12 100644 (file)
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -54,3 +54,4 @@
  53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T  [0070:1404]
  54 -> Norwood Micro TV Tuner
  55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM  [c180:c980]
+ 56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder   [0070:9600,0070:9601,0070:9602]

diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 29ba5d5..4a9998f 100644 (file)
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1280,6 +1280,29 @@ struct cx88_board cx88_boards[] = {
                       .gpio3  = 0x02000000,
               }},
        },
+       [CX88_BOARD_HAUPPAUGE_HVR1300] = {
+               .name           = "Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder",
+               .tuner_type     = TUNER_PHILIPS_FMD1216ME_MK3,
+               .radio_type     = UNSET,
+               .tuner_addr     = ADDR_UNSET,
+               .radio_addr     = ADDR_UNSET,
+               .tda9887_conf   = TDA9887_PRESENT,
+               .input          = {{
+                       .type   = CX88_VMUX_TELEVISION,
+                       .vmux   = 0,
+                       .gpio0  = 0xe780,
+               },{
+                       .type   = CX88_VMUX_COMPOSITE1,
+                       .vmux   = 1,
+                       .gpio0  = 0xe780,
+               },{
+                       .type   = CX88_VMUX_SVIDEO,
+                       .vmux   = 2,
+                       .gpio0  = 0xe780,
+               }},
+               /* fixme: Add radio support */
+               .dvb            = 1,
+       },
 };
 const unsigned int cx88_bcount = ARRAY_SIZE(cx88_boards);
 
@@ -1542,6 +1565,18 @@ struct cx88_subid cx88_subids[] = {
                .subvendor = 0xc180,
                .subdevice = 0xc980,
                .card      = CX88_BOARD_TE_DTV_250_OEM_SWANN,
+       },{
+               .subvendor = 0x0070,
+               .subdevice = 0x9600,
+               .card      = CX88_BOARD_HAUPPAUGE_HVR1300,
+       },{
+               .subvendor = 0x0070,
+               .subdevice = 0x9601,
+               .card      = CX88_BOARD_HAUPPAUGE_HVR1300,
+       },{
+               .subvendor = 0x0070,
+               .subdevice = 0x9602,
+               .card      = CX88_BOARD_HAUPPAUGE_HVR1300,
        },
 };
 const unsigned int cx88_idcount = ARRAY_SIZE(cx88_subids);
@@ -1597,6 +1632,11 @@ static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
        case 92000: /* Nova-SE2 (OEM, No Video or IR) */
        case 94009: /* WinTV-HVR1100 (Video and IR Retail) */
        case 94501: /* WinTV-HVR1100 (Video and IR OEM) */
+       case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */
+       case 96019: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX/TX) */
+       case 96559: /* WinTV-HVR1300 (PAL Video, MPEG Video no IR) */
+       case 96569: /* WinTV-HVR1300 () */
+       case 96659: /* WinTV-HVR1300 () */
        case 98559: /* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */
                /* known */
                break;
@@ -1723,6 +1763,22 @@ void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
                       core->name, i, cx88_boards[i].name);
 }
 
+void cx88_card_setup_pre_i2c(struct cx88_core *core)
+{
+       switch (core->board) {
+       case CX88_BOARD_HAUPPAUGE_HVR1300:
+               /* Bring the 702 demod up before i2c scanning/attach or devices are hidden */
+               /* We leave here with the 702 on the bus */
+               cx_write(MO_GP0_IO, 0x0000e780);
+               udelay(1000);
+               cx_clear(MO_GP0_IO, 0x00000080);
+               udelay(50);
+               cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
+               udelay(1000);
+               break;
+       }
+}
+
 void cx88_card_setup(struct cx88_core *core)
 {
        static u8 eeprom[256];
@@ -1752,6 +1808,7 @@ void cx88_card_setup(struct cx88_core *core)
        case CX88_BOARD_HAUPPAUGE_HVR1100:
        case CX88_BOARD_HAUPPAUGE_HVR1100LP:
        case CX88_BOARD_HAUPPAUGE_HVR3000:
+       case CX88_BOARD_HAUPPAUGE_HVR1300:
                if (0 == core->i2c_rc)
                        hauppauge_eeprom(core,eeprom);
                break;

diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 888ccb6..f379ede 100644 (file)
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -1133,6 +1133,7 @@ struct cx88_core* cx88_core_get(struct pci_dev *pci)
 
        /* init hardware */
        cx88_reset(core);
+       cx88_card_setup_pre_i2c(core);
        cx88_i2c_init(core,pci);
        cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
        cx88_card_setup(core);

diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index a5812e2..c87041d 100644 (file)
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -319,6 +319,10 @@ static struct cx22702_config hauppauge_hvr1100_config = {
        .demod_address = 0x63,
        .output_mode   = CX22702_SERIAL_OUTPUT,
 };
+static struct cx22702_config hauppauge_hvr1300_config = {
+       .demod_address = 0x63,
+       .output_mode   = CX22702_SERIAL_OUTPUT,
+};
 
 static int or51132_set_ts_param(struct dvb_frontend* fe,
                                int is_punctured)
@@ -544,6 +548,16 @@ static int dvb_register(struct cx8802_dev *dev)
                                   &dvb_pll_fmd1216me);
                }
                break;
+       case CX88_BOARD_HAUPPAUGE_HVR1300:
+               dev->dvb.frontend = dvb_attach(cx22702_attach,
+                                              &hauppauge_hvr1300_config,
+                                              &dev->core->i2c_adap);
+               if (dev->dvb.frontend != NULL) {
+                       dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+                                  &dev->core->i2c_adap,
+                                  &dvb_pll_fmd1216me);
+               }
+               break;
        case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
                dev->dvb.frontend = dvb_attach(mt352_attach,
                                               &dvico_fusionhdtv,

diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 3049bd5..83ebf7a 100644 (file)
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -195,6 +195,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
        case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
        case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
        case CX88_BOARD_HAUPPAUGE_HVR1100:
+       case CX88_BOARD_HAUPPAUGE_HVR1300:
                ir_codes = ir_codes_hauppauge_new;
                ir_type = IR_TYPE_RC5;
                ir->sampling = 1;
@@ -417,6 +418,7 @@ void cx88_ir_irq(struct cx88_core *core)
        case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
        case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
        case CX88_BOARD_HAUPPAUGE_HVR1100:
+       case CX88_BOARD_HAUPPAUGE_HVR1300:
                ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
                ir_dprintk("biphase decoded: %x\n", ircode);
                if ((ircode & 0xfffff000) != 0x3000)

diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index 1c87c2e..89f12e2 100644 (file)
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -200,6 +200,7 @@ extern struct sram_channel cx88_sram_channels[];
 #define CX88_BOARD_HAUPPAUGE_HVR3000       53
 #define CX88_BOARD_NORWOOD_MICRO           54
 #define CX88_BOARD_TE_DTV_250_OEM_SWANN    55
+#define CX88_BOARD_HAUPPAUGE_HVR1300       56
 
 enum cx88_itype {
        CX88_VMUX_COMPOSITE1 = 1,
@@ -548,6 +549,7 @@ extern const unsigned int cx88_idcount;
 
 extern void cx88_card_list(struct cx88_core *core, struct pci_dev *pci);
 extern void cx88_card_setup(struct cx88_core *core);
+extern void cx88_card_setup_pre_i2c(struct cx88_core *core);
 
 /* ----------------------------------------------------------- */
 /* cx88-tvaudio.c                                              */