If this driver is compiled as a module, it will be named ums-jumpshot.
config USB_STORAGE_ALAUDA
- bool "Olympus MAUSB-10/Fuji DPC-R1 support"
+ tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
depends on USB_STORAGE
help
Say Y here to include additional code to support the Olympus MAUSB-10
These devices are based on the Alauda chip and support both
XD and SmartMedia cards.
+ If this driver is compiled as a module, it will be named ums-alauda.
+
config USB_STORAGE_ONETOUCH
bool "Support OneTouch Button on Maxtor Hard Drives"
depends on USB_STORAGE
obj-$(CONFIG_USB_STORAGE) += usb-storage.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o
obj-$(CONFIG_USB) += libusual.o usual-tables.o
endif
+obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o
obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o
obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o
obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o
+ums-alauda-objs := alauda.o
ums-cypress-objs := cypress_atacb.o
ums-datafab-objs := datafab.o
ums-freecom-objs := freecom.o
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/module.h>
+
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include "transport.h"
#include "protocol.h"
#include "debug.h"
-#include "alauda.h"
+
+/*
+ * Status bytes
+ */
+#define ALAUDA_STATUS_ERROR 0x01
+#define ALAUDA_STATUS_READY 0x40
+
+/*
+ * Control opcodes (for request field)
+ */
+#define ALAUDA_GET_XD_MEDIA_STATUS 0x08
+#define ALAUDA_GET_SM_MEDIA_STATUS 0x98
+#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a
+#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a
+#define ALAUDA_GET_XD_MEDIA_SIG 0x86
+#define ALAUDA_GET_SM_MEDIA_SIG 0x96
+
+/*
+ * Bulk command identity (byte 0)
+ */
+#define ALAUDA_BULK_CMD 0x40
+
+/*
+ * Bulk opcodes (byte 1)
+ */
+#define ALAUDA_BULK_GET_REDU_DATA 0x85
+#define ALAUDA_BULK_READ_BLOCK 0x94
+#define ALAUDA_BULK_ERASE_BLOCK 0xa3
+#define ALAUDA_BULK_WRITE_BLOCK 0xb4
+#define ALAUDA_BULK_GET_STATUS2 0xb7
+#define ALAUDA_BULK_RESET_MEDIA 0xe0
+
+/*
+ * Port to operate on (byte 8)
+ */
+#define ALAUDA_PORT_XD 0x00
+#define ALAUDA_PORT_SM 0x01
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF 0xffff
+#define SPARE 0xfffe
+#define UNUSABLE 0xfffd
+
+struct alauda_media_info {
+ unsigned long capacity; /* total media size in bytes */
+ unsigned int pagesize; /* page size in bytes */
+ unsigned int blocksize; /* number of pages per block */
+ unsigned int uzonesize; /* number of usable blocks per zone */
+ unsigned int zonesize; /* number of blocks per zone */
+ unsigned int blockmask; /* mask to get page from address */
+
+ unsigned char pageshift;
+ unsigned char blockshift;
+ unsigned char zoneshift;
+
+ u16 **lba_to_pba; /* logical to physical block map */
+ u16 **pba_to_lba; /* physical to logical block map */
+};
+
+struct alauda_info {
+ struct alauda_media_info port[2];
+ int wr_ep; /* endpoint to write data out of */
+
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
#define LSB_of(s) ((s)&0xFF)
#define PBA_HI(pba) (pba >> 3)
#define PBA_ZONE(pba) (pba >> 11)
+static int init_alauda(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName, useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id alauda_usb_ids[] = {
+# include "unusual_alauda.h"
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, alauda_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+ vendor_name, product_name, use_protocol, use_transport, \
+ init_function, Flags) \
+{ \
+ .vendorName = vendor_name, \
+ .productName = product_name, \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
+ .initFunction = init_function, \
+}
+
+static struct us_unusual_dev alauda_unusual_dev_list[] = {
+# include "unusual_alauda.h"
+ { } /* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
/*
* Media handling
*/
/*
* Initialize alauda_info struct and find the data-write endpoint
*/
-int init_alauda(struct us_data *us)
+static int init_alauda(struct us_data *us)
{
struct alauda_info *info;
struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
return USB_STOR_TRANSPORT_GOOD;
}
-int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
{
int rc;
struct alauda_info *info = (struct alauda_info *) us->extra;
return USB_STOR_TRANSPORT_FAILED;
}
+static int alauda_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct us_data *us;
+ int result;
+
+ result = usb_stor_probe1(&us, intf, id,
+ (id - alauda_usb_ids) + alauda_unusual_dev_list);
+ if (result)
+ return result;
+
+ us->transport_name = "Alauda Control/Bulk";
+ us->transport = alauda_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ us->max_lun = 1;
+
+ result = usb_stor_probe2(us);
+ return result;
+}
+
+static struct usb_driver alauda_driver = {
+ .name = "ums-alauda",
+ .probe = alauda_probe,
+ .disconnect = usb_stor_disconnect,
+ .suspend = usb_stor_suspend,
+ .resume = usb_stor_resume,
+ .reset_resume = usb_stor_reset_resume,
+ .pre_reset = usb_stor_pre_reset,
+ .post_reset = usb_stor_post_reset,
+ .id_table = alauda_usb_ids,
+ .soft_unbind = 1,
+};
+
+static int __init alauda_init(void)
+{
+ return usb_register(&alauda_driver);
+}
+
+static void __exit alauda_exit(void)
+{
+ usb_deregister(&alauda_driver);
+}
+
+module_init(alauda_init);
+module_exit(alauda_exit);
+++ /dev/null
-/*
- * Driver for Alauda-based card readers
- *
- * Current development and maintenance by:
- * (c) 2005 Daniel Drake <dsd@gentoo.org>
- *
- * See alauda.c for more explanation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _USB_ALAUDA_H
-#define _USB_ALAUDA_H
-
-/*
- * Status bytes
- */
-#define ALAUDA_STATUS_ERROR 0x01
-#define ALAUDA_STATUS_READY 0x40
-
-/*
- * Control opcodes (for request field)
- */
-#define ALAUDA_GET_XD_MEDIA_STATUS 0x08
-#define ALAUDA_GET_SM_MEDIA_STATUS 0x98
-#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a
-#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a
-#define ALAUDA_GET_XD_MEDIA_SIG 0x86
-#define ALAUDA_GET_SM_MEDIA_SIG 0x96
-
-/*
- * Bulk command identity (byte 0)
- */
-#define ALAUDA_BULK_CMD 0x40
-
-/*
- * Bulk opcodes (byte 1)
- */
-#define ALAUDA_BULK_GET_REDU_DATA 0x85
-#define ALAUDA_BULK_READ_BLOCK 0x94
-#define ALAUDA_BULK_ERASE_BLOCK 0xa3
-#define ALAUDA_BULK_WRITE_BLOCK 0xb4
-#define ALAUDA_BULK_GET_STATUS2 0xb7
-#define ALAUDA_BULK_RESET_MEDIA 0xe0
-
-/*
- * Port to operate on (byte 8)
- */
-#define ALAUDA_PORT_XD 0x00
-#define ALAUDA_PORT_SM 0x01
-
-/*
- * LBA and PBA are unsigned ints. Special values.
- */
-#define UNDEF 0xffff
-#define SPARE 0xfffe
-#define UNUSABLE 0xfffd
-
-int init_alauda(struct us_data *us);
-int alauda_transport(struct scsi_cmnd *srb, struct us_data *us);
-
-struct alauda_media_info {
- unsigned long capacity; /* total media size in bytes */
- unsigned int pagesize; /* page size in bytes */
- unsigned int blocksize; /* number of pages per block */
- unsigned int uzonesize; /* number of usable blocks per zone */
- unsigned int zonesize; /* number of blocks per zone */
- unsigned int blockmask; /* mask to get page from address */
-
- unsigned char pageshift;
- unsigned char blockshift;
- unsigned char zoneshift;
-
- u16 **lba_to_pba; /* logical to physical block map */
- u16 **pba_to_lba; /* physical to logical block map */
-};
-
-struct alauda_info {
- struct alauda_media_info port[2];
- int wr_ep; /* endpoint to write data out of */
-
- unsigned char sense_key;
- unsigned long sense_asc; /* additional sense code */
- unsigned long sense_ascq; /* additional sense code qualifier */
-};
-
-#endif
-
--- /dev/null
+/* Unusual Devices File for the Alauda-based card readers
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_USB_STORAGE_ALAUDA) || \
+ defined(CONFIG_USB_STORAGE_ALAUDA_MODULE)
+
+UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102,
+ "Fujifilm",
+ "DPC-R1 (Alauda)",
+ US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
+
+UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102,
+ "Olympus",
+ "MAUSB-10 (Alauda)",
+ US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */
"Silicon Media R/W",
US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102,
- "Fujifilm",
- "DPC-R1 (Alauda)",
- US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
-#endif
-
/* Reported by RTE <raszilki@yandex.ru> */
UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141,
"JetFlash",
US_FL_SINGLE_LUN ),
#endif
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102,
- "Olympus",
- "MAUSB-10 (Alauda)",
- US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
-#endif
-
/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
* Only revision 1.13 tested (same for all of the above devices,
* based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
#ifdef CONFIG_USB_STORAGE_ONETOUCH
#include "onetouch.h"
#endif
-#ifdef CONFIG_USB_STORAGE_ALAUDA
-#include "alauda.h"
-#endif
#ifdef CONFIG_USB_STORAGE_KARMA
#include "karma.h"
#endif
us->transport_reset = usb_stor_Bulk_reset;
break;
-#ifdef CONFIG_USB_STORAGE_ALAUDA
- case US_PR_ALAUDA:
- us->transport_name = "Alauda Control/Bulk";
- us->transport = alauda_transport;
- us->transport_reset = usb_stor_Bulk_reset;
- us->max_lun = 1;
- break;
-#endif
-
#ifdef CONFIG_USB_STORAGE_KARMA
case US_PR_KARMA:
us->transport_name = "Rio Karma/Bulk";
}
static struct ignore_entry ignore_ids[] = {
+# include "unusual_alauda.h"
# include "unusual_cypress.h"
# include "unusual_datafab.h"
# include "unusual_freecom.h"
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff