ALC262_MODEL_LAST /* last tag */
};
+/* ALC268 models */
+enum {
+ ALC268_3ST,
+ ALC268_AUTO,
+ ALC268_MODEL_LAST /* last tag */
+};
+
/* ALC861 models */
enum {
ALC861_3ST,
}
/*
+ * ALC268 channel source setting (2 channel)
+ */
+#define ALC268_DIGOUT_NID ALC880_DIGOUT_NID
+#define alc268_modes alc260_modes
+
+static hda_nid_t alc268_dac_nids[2] = {
+ /* front, hp */
+ 0x02, 0x03
+};
+
+static hda_nid_t alc268_adc_nids[2] = {
+ /* ADC0-1 */
+ 0x08, 0x07
+};
+
+static hda_nid_t alc268_adc_nids_alt[1] = {
+ /* ADC0 */
+ 0x08
+};
+
+static struct snd_kcontrol_new alc268_base_mixer[] = {
+ /* output mixer control */
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ { }
+};
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc268_base_init_verbs[] = {
+ /* Unmute DAC0-1 and set vol = 0 */
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /*
+ * Set up output mixers (0x0c - 0x0e)
+ */
+ /* set vol=0 to output mixers */
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1c, 14, 15, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
+
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8))},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x03 << 8))},
+ { }
+};
+
+/*
+ * generic initialization of ADC, input mixers and output mixers
+ */
+static struct hda_verb alc268_volume_init_verbs[] = {
+ /* set output DAC */
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+ {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20},
+
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+ /* set PCBEEP vol = 0 */
+ {0x1d, AC_VERB_SET_AMP_GAIN_MUTE, (0xb000 | (0x00 << 8))},
+
+ { }
+};
+
+#define alc268_mux_enum_info alc_mux_enum_info
+#define alc268_mux_enum_get alc_mux_enum_get
+
+static int alc268_mux_enum_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ const struct hda_input_mux *imux = spec->input_mux;
+ unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ static hda_nid_t capture_mixers[3] = { 0x23, 0x24 };
+ hda_nid_t nid = capture_mixers[adc_idx];
+ unsigned int *cur_val = &spec->cur_mux[adc_idx];
+ unsigned int i, idx;
+
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+ if (*cur_val == idx && !codec->in_resume)
+ return 0;
+ for (i = 0; i < imux->num_items; i++) {
+ unsigned int v = (i == idx) ? 0x7000 : 0x7080;
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+ v | (imux->items[i].index << 8));
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL,
+ idx );
+ }
+ *cur_val = idx;
+ return 1;
+}
+
+static struct snd_kcontrol_new alc268_capture_alt_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ * FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 1,
+ .info = alc268_mux_enum_info,
+ .get = alc268_mux_enum_get,
+ .put = alc268_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc268_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x24, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x24, 0x0, HDA_OUTPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ /* The multiple "Capture Source" controls confuse alsamixer
+ * So call somewhat different..
+ * FIXME: the controls appear in the "playback" view!
+ */
+ /* .name = "Capture Source", */
+ .name = "Input Source",
+ .count = 2,
+ .info = alc268_mux_enum_info,
+ .get = alc268_mux_enum_get,
+ .put = alc268_mux_enum_put,
+ },
+ { } /* end */
+};
+
+static struct hda_input_mux alc268_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x3 },
+ },
+};
+
+/* create input playback/capture controls for the given pin */
+static int alc268_new_analog_output(struct alc_spec *spec, hda_nid_t nid,
+ const char *ctlname, int idx)
+{
+ char name[32];
+ int err;
+
+ sprintf(name, "%s Playback Volume", ctlname);
+ if (nid == 0x14) {
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(0x02, 3, idx,
+ HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ } else if (nid == 0x15) {
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(0x03, 3, idx,
+ HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ } else
+ return -1;
+ sprintf(name, "%s Playback Switch", ctlname);
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, idx, HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+/* add playback controls from the parsed DAC table */
+static int alc268_auto_create_multi_out_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ hda_nid_t nid;
+ int err;
+
+ spec->multiout.num_dacs = 2; /* only use one dac */
+ spec->multiout.dac_nids = spec->private_dac_nids;
+ spec->multiout.dac_nids[0] = 2;
+ spec->multiout.dac_nids[1] = 3;
+
+ nid = cfg->line_out_pins[0];
+ if (nid)
+ alc268_new_analog_output(spec, nid, "Front", 0);
+
+ nid = cfg->speaker_pins[0];
+ if (nid == 0x1d) {
+ err = add_control(spec, ALC_CTL_WIDGET_VOL,
+ "Speaker Playback Volume",
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
+ if (err < 0)
+ return err;
+ }
+ nid = cfg->hp_pins[0];
+ if (nid)
+ alc268_new_analog_output(spec, nid, "Headphone", 0);
+
+ nid = cfg->line_out_pins[1] | cfg->line_out_pins[2];
+ if (nid == 0x16) {
+ err = add_control(spec, ALC_CTL_WIDGET_MUTE,
+ "Mono Playback Switch",
+ HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_INPUT));
+ if (err < 0)
+ return err;
+ }
+ return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int alc268_auto_create_analog_input_ctls(struct alc_spec *spec,
+ const struct auto_pin_cfg *cfg)
+{
+ struct hda_input_mux *imux = &spec->private_imux;
+ int i, idx1;
+
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ switch(cfg->input_pins[i]) {
+ case 0x18:
+ idx1 = 0; /* Mic 1 */
+ break;
+ case 0x19:
+ idx1 = 1; /* Mic 2 */
+ break;
+ case 0x1a:
+ idx1 = 2; /* Line In */
+ break;
+ case 0x1c:
+ idx1 = 3; /* CD */
+ break;
+ default:
+ continue;
+ }
+ imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
+ imux->items[imux->num_items].index = idx1;
+ imux->num_items++;
+ }
+ return 0;
+}
+
+static void alc268_auto_init_mono_speaker_out(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t speaker_nid = spec->autocfg.speaker_pins[0];
+ hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
+ hda_nid_t line_nid = spec->autocfg.line_out_pins[0];
+ unsigned int dac_vol1, dac_vol2;
+
+ if (speaker_nid) {
+ snd_hda_codec_write(codec, speaker_nid, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ snd_hda_codec_write(codec, 0x0f, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_IN_UNMUTE(1));
+ snd_hda_codec_write(codec, 0x10, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE,
+ AMP_IN_UNMUTE(1));
+ } else {
+ snd_hda_codec_write(codec, 0x0f, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1));
+ snd_hda_codec_write(codec, 0x10, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1));
+ }
+
+ dac_vol1 = dac_vol2 = 0xb000 | 0x40; /* set max volume */
+ if (line_nid == 0x14)
+ dac_vol2 = AMP_OUT_ZERO;
+ else if (line_nid == 0x15)
+ dac_vol1 = AMP_OUT_ZERO;
+ if (hp_nid == 0x14)
+ dac_vol2 = AMP_OUT_ZERO;
+ else if (hp_nid == 0x15)
+ dac_vol1 = AMP_OUT_ZERO;
+ if (line_nid != 0x16 || hp_nid != 0x16 ||
+ spec->autocfg.line_out_pins[1] != 0x16 ||
+ spec->autocfg.line_out_pins[2] != 0x16)
+ dac_vol1 = dac_vol2 = AMP_OUT_ZERO;
+
+ snd_hda_codec_write(codec, 0x02, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, dac_vol1);
+ snd_hda_codec_write(codec, 0x03, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, dac_vol2);
+}
+
+/* pcm configuration: identiacal with ALC880 */
+#define alc268_pcm_analog_playback alc880_pcm_analog_playback
+#define alc268_pcm_analog_capture alc880_pcm_analog_capture
+#define alc268_pcm_digital_playback alc880_pcm_digital_playback
+
+/*
+ * BIOS auto configuration
+ */
+static int alc268_parse_auto_config(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ int err;
+ static hda_nid_t alc268_ignore[] = { 0 };
+
+ err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
+ alc268_ignore);
+ if (err < 0)
+ return err;
+ if (!spec->autocfg.line_outs)
+ return 0; /* can't find valid BIOS pin config */
+
+ err = alc268_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+ err = alc268_auto_create_analog_input_ctls(spec, &spec->autocfg);
+ if (err < 0)
+ return err;
+
+ spec->multiout.max_channels = 2;
+
+ /* digital only support output */
+ if (spec->autocfg.dig_out_pin)
+ spec->multiout.dig_out_nid = ALC268_DIGOUT_NID;
+
+ if (spec->kctl_alloc)
+ spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+
+ spec->init_verbs[spec->num_init_verbs++] = alc268_volume_init_verbs;
+ spec->num_mux_defs = 1;
+ spec->input_mux = &spec->private_imux;
+
+ return 1;
+}
+
+#define alc268_auto_init_multi_out alc882_auto_init_multi_out
+#define alc268_auto_init_hp_out alc882_auto_init_hp_out
+#define alc268_auto_init_analog_input alc882_auto_init_analog_input
+
+/* init callback for auto-configuration model -- overriding the default init */
+static void alc268_auto_init(struct hda_codec *codec)
+{
+ alc268_auto_init_multi_out(codec);
+ alc268_auto_init_hp_out(codec);
+ alc268_auto_init_mono_speaker_out(codec);
+ alc268_auto_init_analog_input(codec);
+}
+
+/*
+ * configuration and preset
+ */
+static const char *alc268_models[ALC268_MODEL_LAST] = {
+ [ALC268_3ST] = "3stack",
+ [ALC268_AUTO] = "auto",
+};
+
+static struct snd_pci_quirk alc268_cfg_tbl[] = {
+ SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
+ {}
+};
+
+static struct alc_config_preset alc268_presets[] = {
+ [ALC268_3ST] = {
+ .mixers = { alc268_base_mixer, alc268_capture_alt_mixer },
+ .init_verbs = { alc268_base_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc268_dac_nids),
+ .dac_nids = alc268_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
+ .adc_nids = alc268_adc_nids_alt,
+ .hp_nid = 0x03,
+ .dig_out_nid = ALC268_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc268_modes),
+ .channel_mode = alc268_modes,
+ .input_mux = &alc268_capture_source,
+ },
+};
+
+static int patch_alc268(struct hda_codec *codec)
+{
+ struct alc_spec *spec;
+ int board_config;
+ int err;
+
+ spec = kcalloc(1, sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ codec->spec = spec;
+
+ board_config = snd_hda_check_board_config(codec, ALC268_MODEL_LAST,
+ alc268_models,
+ alc268_cfg_tbl);
+
+ if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
+ printk(KERN_INFO "hda_codec: Unknown model for ALC268, "
+ "trying auto-probe from BIOS...\n");
+ board_config = ALC268_AUTO;
+ }
+
+ if (board_config == ALC268_AUTO) {
+ /* automatic parse from the BIOS config */
+ err = alc268_parse_auto_config(codec);
+ if (err < 0) {
+ alc_free(codec);
+ return err;
+ } else if (!err) {
+ printk(KERN_INFO
+ "hda_codec: Cannot set up configuration "
+ "from BIOS. Using base mode...\n");
+ board_config = ALC268_3ST;
+ }
+ }
+
+ if (board_config != ALC268_AUTO)
+ setup_preset(spec, &alc268_presets[board_config]);
+
+ spec->stream_name_analog = "ALC268 Analog";
+ spec->stream_analog_playback = &alc268_pcm_analog_playback;
+ spec->stream_analog_capture = &alc268_pcm_analog_capture;
+
+ spec->stream_name_digital = "ALC268 Digital";
+ spec->stream_digital_playback = &alc268_pcm_digital_playback;
+
+ if (board_config == ALC268_AUTO) {
+ if (!spec->adc_nids && spec->input_mux) {
+ /* check whether NID 0x07 is valid */
+ unsigned int wcap = get_wcaps(codec, 0x07);
+
+ /* get type */
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ if (wcap != AC_WID_AUD_IN) {
+ spec->adc_nids = alc268_adc_nids_alt;
+ spec->num_adc_nids =
+ ARRAY_SIZE(alc268_adc_nids_alt);
+ spec->mixers[spec->num_mixers] =
+ alc268_capture_alt_mixer;
+ spec->num_mixers++;
+ } else {
+ spec->adc_nids = alc268_adc_nids;
+ spec->num_adc_nids =
+ ARRAY_SIZE(alc268_adc_nids);
+ spec->mixers[spec->num_mixers] =
+ alc268_capture_mixer;
+ spec->num_mixers++;
+ }
+ }
+ }
+ codec->patch_ops = alc_patch_ops;
+ if (board_config == ALC268_AUTO)
+ spec->init_hook = alc268_auto_init;
+
+ return 0;
+}
+
+/*
* ALC861 channel source setting (2/6 channel selection for 3-stack)
*/
struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
{ .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
+ { .id = 0x10ec0268, .name = "ALC268", .patch = patch_alc268 },
{ .id = 0x10ec0861, .rev = 0x100340, .name = "ALC660",
.patch = patch_alc861 },
{ .id = 0x10ec0660, .name = "ALC660-VD", .patch = patch_alc861vd },
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff