#include <linux/pmu.h>
#include <linux/delay.h>
#include <linux/completion.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/timer.h>
#include <asm/keylargo.h>
#include <asm/uninorth.h>
#include <asm/io.h>
#define DBG_LOW(x...)
#endif
+
+static int pmac_i2c_force_poll = 1;
+
/*
* A bus structure. Each bus in the system has such a structure associated.
*/
struct semaphore sem;
int opened;
int polled; /* open mode */
+ struct platform_device *platform_dev;
/* ops */
int (*open)(struct pmac_i2c_bus *bus);
void __iomem *base; /* register base address */
int bsteps; /* register stepping */
int speed; /* speed */
+ int irq;
+ u8 *data;
+ unsigned len;
+ int state;
+ int rw;
+ int polled;
+ int result;
+ struct completion complete;
+ spinlock_t lock;
+ struct timer_list timeout_timer;
};
/* Register indices */
reg_data
} reg_t;
+/* The Tumbler audio equalizer can be really slow sometimes */
+#define KW_POLL_TIMEOUT (2*HZ)
/* Mode register */
#define KW_I2C_MODE_100KHZ 0x00
};
#define WRONG_STATE(name) do {\
- printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
- name, __kw_state_names[state], isr); \
+ printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s " \
+ "(isr: %02x)\n", \
+ name, __kw_state_names[host->state], isr); \
} while(0)
static const char *__kw_state_names[] = {
"state_dead"
};
-static inline u8 __kw_read_reg(struct pmac_i2c_bus *bus, reg_t reg)
+static inline u8 __kw_read_reg(struct pmac_i2c_host_kw *host, reg_t reg)
{
- struct pmac_i2c_host_kw *host = bus->hostdata;
return readb(host->base + (((unsigned int)reg) << host->bsteps));
}
-static inline void __kw_write_reg(struct pmac_i2c_bus *bus, reg_t reg, u8 val)
+static inline void __kw_write_reg(struct pmac_i2c_host_kw *host,
+ reg_t reg, u8 val)
{
- struct pmac_i2c_host_kw *host = bus->hostdata;
writeb(val, host->base + (((unsigned)reg) << host->bsteps));
- (void)__kw_read_reg(bus, reg_subaddr);
+ (void)__kw_read_reg(host, reg_subaddr);
}
-#define kw_write_reg(reg, val) __kw_write_reg(bus, reg, val)
-#define kw_read_reg(reg) __kw_read_reg(bus, reg)
+#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val)
+#define kw_read_reg(reg) __kw_read_reg(host, reg)
-static u8 kw_i2c_wait_interrupt(struct pmac_i2c_bus* bus)
+static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host)
{
int i, j;
u8 isr;
* on udelay nor schedule when in polled mode !
* For now, just use a bogus loop....
*/
- if (bus->polled) {
- for (j = 1; j < 1000000; j++)
+ if (host->polled) {
+ for (j = 1; j < 100000; j++)
mb();
} else
msleep(1);
return isr;
}
-static int kw_i2c_handle_interrupt(struct pmac_i2c_bus *bus, int state, int rw,
- int *rc, u8 **data, int *len, u8 isr)
+static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
{
u8 ack;
DBG_LOW("kw_handle_interrupt(%s, isr: %x)\n",
- __kw_state_names[state], isr);
+ __kw_state_names[host->state], isr);
+
+ if (host->state == state_idle) {
+ printk(KERN_WARNING "low_i2c: Keywest got an out of state"
+ " interrupt, ignoring\n");
+ kw_write_reg(reg_isr, isr);
+ return;
+ }
if (isr == 0) {
- if (state != state_stop) {
+ if (host->state != state_stop) {
DBG_LOW("KW: Timeout !\n");
- *rc = -EIO;
+ host->result = -EIO;
goto stop;
}
- if (state == state_stop) {
+ if (host->state == state_stop) {
ack = kw_read_reg(reg_status);
- if (!(ack & KW_I2C_STAT_BUSY)) {
- state = state_idle;
- kw_write_reg(reg_ier, 0x00);
- }
+ if (ack & KW_I2C_STAT_BUSY)
+ kw_write_reg(reg_status, 0);
+ host->state = state_idle;
+ kw_write_reg(reg_ier, 0x00);
+ if (!host->polled)
+ complete(&host->complete);
}
- return state;
+ return;
}
if (isr & KW_I2C_IRQ_ADDR) {
ack = kw_read_reg(reg_status);
- if (state != state_addr) {
+ if (host->state != state_addr) {
kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
WRONG_STATE("KW_I2C_IRQ_ADDR");
- *rc = -EIO;
+ host->result = -EIO;
goto stop;
}
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- *rc = -ENODEV;
+ host->result = -ENODEV;
DBG_LOW("KW: NAK on address\n");
- return state_stop;
+ host->state = state_stop;
+ return;
} else {
- if (rw) {
- state = state_read;
- if (*len > 1)
+ if (host->len == 0) {
+ kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
+ goto stop;
+ }
+ if (host->rw) {
+ host->state = state_read;
+ if (host->len > 1)
kw_write_reg(reg_control,
KW_I2C_CTL_AAK);
} else {
- state = state_write;
- kw_write_reg(reg_data, **data);
- (*data)++; (*len)--;
+ host->state = state_write;
+ kw_write_reg(reg_data, *(host->data++));
+ host->len--;
}
}
kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
}
if (isr & KW_I2C_IRQ_DATA) {
- if (state == state_read) {
- **data = kw_read_reg(reg_data);
- (*data)++; (*len)--;
+ if (host->state == state_read) {
+ *(host->data++) = kw_read_reg(reg_data);
+ host->len--;
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
- if ((*len) == 0)
- state = state_stop;
- else if ((*len) == 1)
+ if (host->len == 0)
+ host->state = state_stop;
+ else if (host->len == 1)
kw_write_reg(reg_control, 0);
- } else if (state == state_write) {
+ } else if (host->state == state_write) {
ack = kw_read_reg(reg_status);
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
DBG_LOW("KW: nack on data write\n");
- *rc = -EIO;
+ host->result = -EIO;
goto stop;
- } else if (*len) {
- kw_write_reg(reg_data, **data);
- (*data)++; (*len)--;
+ } else if (host->len) {
+ kw_write_reg(reg_data, *(host->data++));
+ host->len--;
} else {
kw_write_reg(reg_control, KW_I2C_CTL_STOP);
- state = state_stop;
- *rc = 0;
+ host->state = state_stop;
+ host->result = 0;
}
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
} else {
kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
WRONG_STATE("KW_I2C_IRQ_DATA");
- if (state != state_stop) {
- *rc = -EIO;
+ if (host->state != state_stop) {
+ host->result = -EIO;
goto stop;
}
}
if (isr & KW_I2C_IRQ_STOP) {
kw_write_reg(reg_isr, KW_I2C_IRQ_STOP);
- if (state != state_stop) {
+ if (host->state != state_stop) {
WRONG_STATE("KW_I2C_IRQ_STOP");
- *rc = -EIO;
+ host->result = -EIO;
}
- return state_idle;
+ host->state = state_idle;
+ if (!host->polled)
+ complete(&host->complete);
}
if (isr & KW_I2C_IRQ_START)
kw_write_reg(reg_isr, KW_I2C_IRQ_START);
- return state;
-
+ return;
stop:
kw_write_reg(reg_control, KW_I2C_CTL_STOP);
- return state_stop;
+ host->state = state_stop;
+ return;
+}
+
+/* Interrupt handler */
+static irqreturn_t kw_i2c_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct pmac_i2c_host_kw *host = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ del_timer(&host->timeout_timer);
+ kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
+ if (host->state != state_idle) {
+ host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
+ add_timer(&host->timeout_timer);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static void kw_i2c_timeout(unsigned long data)
+{
+ struct pmac_i2c_host_kw *host = (struct pmac_i2c_host_kw *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
+ if (host->state != state_idle) {
+ host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
+ add_timer(&host->timeout_timer);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
}
static int kw_i2c_open(struct pmac_i2c_bus *bus)
{
struct pmac_i2c_host_kw *host = bus->hostdata;
u8 mode_reg = host->speed;
- int state = state_addr;
- int rc = 0;
+ int use_irq = host->irq != NO_IRQ && !bus->polled;
/* Setup mode & subaddress if any */
switch(bus->mode) {
|| (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
kw_write_reg(reg_subaddr, subaddr);
- /* Start sending address & disable interrupt*/
- kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/);
+ /* Prepare for async operations */
+ host->data = data;
+ host->len = len;
+ host->state = state_addr;
+ host->result = 0;
+ host->rw = (addrdir & 1);
+ host->polled = bus->polled;
+
+ /* Enable interrupt if not using polled mode and interrupt is
+ * available
+ */
+ if (use_irq) {
+ /* Clear completion */
+ INIT_COMPLETION(host->complete);
+ /* Ack stale interrupts */
+ kw_write_reg(reg_isr, kw_read_reg(reg_isr));
+ /* Arm timeout */
+ host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
+ add_timer(&host->timeout_timer);
+ /* Enable emission */
+ kw_write_reg(reg_ier, KW_I2C_IRQ_MASK);
+ }
+
+ /* Start sending address */
kw_write_reg(reg_control, KW_I2C_CTL_XADDR);
- /* State machine, to turn into an interrupt handler in the future */
- while(state != state_idle) {
- u8 isr = kw_i2c_wait_interrupt(bus);
- state = kw_i2c_handle_interrupt(bus, state, addrdir & 1, &rc,
- &data, &len, isr);
+ /* Wait for completion */
+ if (use_irq)
+ wait_for_completion(&host->complete);
+ else {
+ while(host->state != state_idle) {
+ unsigned long flags;
+
+ u8 isr = kw_i2c_wait_interrupt(host);
+ spin_lock_irqsave(&host->lock, flags);
+ kw_i2c_handle_interrupt(host, isr);
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
}
- return rc;
+ /* Disable emission */
+ kw_write_reg(reg_ier, 0);
+
+ return host->result;
}
static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
return NULL;
}
init_MUTEX(&host->mutex);
+ init_completion(&host->complete);
+ spin_lock_init(&host->lock);
+ init_timer(&host->timeout_timer);
+ host->timeout_timer.function = kw_i2c_timeout;
+ host->timeout_timer.data = (unsigned long)host;
+
psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
steps = psteps ? (*psteps) : 0x10;
for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
host->speed = KW_I2C_MODE_25KHZ;
break;
}
+ if (np->n_intrs > 0)
+ host->irq = np->intrs[0].line;
+ else
+ host->irq = NO_IRQ;
- printk(KERN_INFO "KeyWest i2c @0x%08x %s\n", *addrp, np->full_name);
host->base = ioremap((*addrp), 0x1000);
+ if (host->base == NULL) {
+ printk(KERN_ERR "low_i2c: Can't map registers for %s\n",
+ np->full_name);
+ kfree(host);
+ return NULL;
+ }
+
+ /* Make sure IRA is disabled */
+ kw_write_reg(reg_ier, 0);
+
+ /* Request chip interrupt */
+ if (request_irq(host->irq, kw_i2c_irq, SA_SHIRQ, "keywest i2c", host))
+ host->irq = NO_IRQ;
+
+ printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
+ *addrp, host->irq, np->full_name);
return host;
}
req->nbytes = sizeof(struct pmu_i2c_hdr) + 1;
req->done = pmu_i2c_complete;
req->arg = ∁
- if (!read) {
+ if (!read && len) {
memcpy(hdr->data, data, len);
req->nbytes += len;
}
" bytes, expected %d !\n", rlen, len);
return -EIO;
}
- memcpy(data, &req->reply[1], len);
+ if (len)
+ memcpy(data, &req->reply[1], len);
return 0;
}
}
int read = addrdir & 1;
int rc = 0;
+ if ((read && len > SMU_I2C_READ_MAX) ||
+ ((!read) && len > SMU_I2C_WRITE_MAX))
+ return -EINVAL;
+
memset(cmd, 0, sizeof(struct smu_i2c_cmd));
cmd->info.bus = bus->channel;
cmd->info.devaddr = addrdir;
default:
return -EINVAL;
}
- if (!read)
+ if (!read && len)
memcpy(cmd->info.data, data, len);
init_completion(&comp);
wait_for_completion(&comp);
rc = cmd->status;
- if (read)
+ if (read && len)
memcpy(data, cmd->info.data, len);
return rc < 0 ? rc : 0;
}
if (!smu_present())
return;
- controller = of_find_node_by_name(NULL, "smu_i2c_control");
+ controller = of_find_node_by_name(NULL, "smu-i2c-control");
if (controller == NULL)
controller = of_find_node_by_name(NULL, "smu");
if (controller == NULL)
}
EXPORT_SYMBOL_GPL(pmac_i2c_get_flags);
+int pmac_i2c_get_channel(struct pmac_i2c_bus *bus)
+{
+ return bus->channel;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_get_channel);
+
+
void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
struct i2c_adapter *adapter)
{
}
EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter);
+struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter)
+{
+ struct pmac_i2c_bus *bus;
+
+ list_for_each_entry(bus, &pmac_i2c_busses, link)
+ if (bus->adapter == adapter)
+ return bus;
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(pmac_i2c_adapter_to_bus);
+
extern int pmac_i2c_match_adapter(struct device_node *dev,
struct i2c_adapter *adapter)
{
int rc;
down(&bus->sem);
- bus->polled = polled;
+ bus->polled = polled || pmac_i2c_force_poll;
bus->opened = 1;
bus->mode = pmac_i2c_mode_std;
if (bus->open && (rc = bus->open(bus)) != 0) {
kw_i2c_probe();
#ifdef CONFIG_ADB_PMU
+ /* Probe PMU i2c busses */
pmu_i2c_probe();
#endif
#ifdef CONFIG_PMAC_SMU
+ /* Probe SMU i2c busses */
smu_i2c_probe();
#endif
-
return 0;
}
arch_initcall(pmac_i2c_init);
+/* Since pmac_i2c_init can be called too early for the platform device
+ * registration, we need to do it at a later time. In our case, subsys
+ * happens to fit well, though I agree it's a bit of a hack...
+ */
+static int __init pmac_i2c_create_platform_devices(void)
+{
+ struct pmac_i2c_bus *bus;
+ int i = 0;
+
+ /* In the case where we are initialized from smp_init(), we must
+ * not use the timer (and thus the irq). It's safe from now on
+ * though
+ */
+ pmac_i2c_force_poll = 0;
+
+ /* Create platform devices */
+ list_for_each_entry(bus, &pmac_i2c_busses, link) {
+ bus->platform_dev =
+ platform_device_alloc("i2c-powermac", i++);
+ if (bus->platform_dev == NULL)
+ return -ENOMEM;
+ bus->platform_dev->dev.platform_data = bus;
+ platform_device_add(bus->platform_dev);
+ }
+
+ return 0;
+}
+subsys_initcall(pmac_i2c_create_platform_devices);
static int __init pmac_declare_of_platform_devices(void)
{
- struct device_node *np, *npp;
+ struct device_node *np;
np = of_find_node_by_name(NULL, "valkyrie");
if (np)
np = of_find_node_by_name(NULL, "platinum");
if (np)
of_platform_device_create(np, "platinum", NULL);
- npp = of_find_node_by_name(NULL, "uni-n");
- if (npp == NULL)
- npp = of_find_node_by_name(NULL, "u3");
- if (npp == NULL)
- npp = of_find_node_by_name(NULL, "u4");
- if (npp) {
- for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) {
- if (strncmp(np->name, "i2c", 3) == 0) {
- of_platform_device_create(np, "uni-n-i2c",
- NULL);
- of_node_put(np);
- break;
- }
- }
- of_node_put(npp);
- }
np = of_find_node_by_type(NULL, "smu");
if (np) {
of_platform_device_create(np, "smu", NULL);
This support is also available as a module. If so, the module
will be called i2c-ixp2000.
-config I2C_KEYWEST
- tristate "Powermac Keywest I2C interface"
+config I2C_POWERMAC
+ tristate "Powermac I2C interface"
depends on I2C && PPC_PMAC
+ default y
help
- This supports the use of the I2C interface in the combo-I/O
- chip on recent Apple machines. Say Y if you have such a machine.
-
- This support is also available as a module. If so, the module
- will be called i2c-keywest.
-
-config I2C_PMAC_SMU
- tristate "Powermac SMU I2C interface"
- depends on I2C && PMAC_SMU
- help
- This supports the use of the I2C interface in the SMU
- chip on recent Apple machines like the iMac G5. It is used
- among others by the thermal control driver for those machines.
- Say Y if you have such a machine.
+ This exposes the various PowerMac i2c interfaces to the linux i2c
+ layer and to userland. It is used by various drivers on the powemac
+ platform, thus should generally be enabled.
This support is also available as a module. If so, the module
- will be called i2c-pmac-smu.
+ will be called i2c-powermac.
config I2C_MPC
tristate "MPC107/824x/85xx/52xx"
obj-$(CONFIG_I2C_ITE) += i2c-ite.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
-obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o
-obj-$(CONFIG_I2C_PMAC_SMU) += i2c-pmac-smu.o
+obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
+++ /dev/null
-/*
- i2c Support for Apple Keywest I2C Bus Controller
-
- Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- Original work by
-
- Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Changes:
-
- 2001/12/13 BenH New implementation
- 2001/12/15 BenH Add support for "byte" and "quick"
- transfers. Add i2c_xfer routine.
- 2003/09/21 BenH Rework state machine with Paulus help
- 2004/01/21 BenH Merge in Greg KH changes, polled mode is back
- 2004/02/05 BenH Merge 64 bits fixes from the g5 ppc64 tree
-
- My understanding of the various modes supported by keywest are:
-
- - Dumb mode : not implemented, probably direct tweaking of lines
- - Standard mode : simple i2c transaction of type
- S Addr R/W A Data A Data ... T
- - Standard sub mode : combined 8 bit subaddr write with data read
- S Addr R/W A SubAddr A Data A Data ... T
- - Combined mode : Subaddress and Data sequences appended with no stop
- S Addr R/W A SubAddr S Addr R/W A Data A Data ... T
-
- Currently, this driver uses only Standard mode for i2c xfer, and
- smbus byte & quick transfers ; and uses StandardSub mode for
- other smbus transfers instead of combined as we need that for the
- sound driver to be happy
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/pmac_low_i2c.h>
-
-#include "i2c-keywest.h"
-
-#undef POLLED_MODE
-
-/* Some debug macros */
-#define WRONG_STATE(name) do {\
- pr_debug("KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
- name, __kw_state_names[iface->state], isr); \
- } while(0)
-
-#ifdef DEBUG
-static const char *__kw_state_names[] = {
- "state_idle",
- "state_addr",
- "state_read",
- "state_write",
- "state_stop",
- "state_dead"
-};
-#endif /* DEBUG */
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's Keywest");
-MODULE_LICENSE("GPL");
-
-#ifdef POLLED_MODE
-/* Don't schedule, the g5 fan controller is too
- * timing sensitive
- */
-static u8
-wait_interrupt(struct keywest_iface* iface)
-{
- int i;
- u8 isr;
-
- for (i = 0; i < 200000; i++) {
- isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK;
- if (isr != 0)
- return isr;
- udelay(10);
- }
- return isr;
-}
-#endif /* POLLED_MODE */
-
-static void
-do_stop(struct keywest_iface* iface, int result)
-{
- write_reg(reg_control, KW_I2C_CTL_STOP);
- iface->state = state_stop;
- iface->result = result;
-}
-
-/* Main state machine for standard & standard sub mode */
-static void
-handle_interrupt(struct keywest_iface *iface, u8 isr)
-{
- int ack;
-
- if (isr == 0) {
- if (iface->state != state_stop) {
- pr_debug("KW: Timeout !\n");
- do_stop(iface, -EIO);
- }
- if (iface->state == state_stop) {
- ack = read_reg(reg_status);
- if (!(ack & KW_I2C_STAT_BUSY)) {
- iface->state = state_idle;
- write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
- complete(&iface->complete);
-#endif /* POLLED_MODE */
- }
- }
- return;
- }
-
- if (isr & KW_I2C_IRQ_ADDR) {
- ack = read_reg(reg_status);
- if (iface->state != state_addr) {
- write_reg(reg_isr, KW_I2C_IRQ_ADDR);
- WRONG_STATE("KW_I2C_IRQ_ADDR");
- do_stop(iface, -EIO);
- return;
- }
- if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- iface->state = state_stop;
- iface->result = -ENODEV;
- pr_debug("KW: NAK on address\n");
- } else {
- /* Handle rw "quick" mode */
- if (iface->datalen == 0) {
- do_stop(iface, 0);
- } else if (iface->read_write == I2C_SMBUS_READ) {
- iface->state = state_read;
- if (iface->datalen > 1)
- write_reg(reg_control, KW_I2C_CTL_AAK);
- } else {
- iface->state = state_write;
- write_reg(reg_data, *(iface->data++));
- iface->datalen--;
- }
- }
- write_reg(reg_isr, KW_I2C_IRQ_ADDR);
- }
-
- if (isr & KW_I2C_IRQ_DATA) {
- if (iface->state == state_read) {
- *(iface->data++) = read_reg(reg_data);
- write_reg(reg_isr, KW_I2C_IRQ_DATA);
- iface->datalen--;
- if (iface->datalen == 0)
- iface->state = state_stop;
- else if (iface->datalen == 1)
- write_reg(reg_control, 0);
- } else if (iface->state == state_write) {
- /* Check ack status */
- ack = read_reg(reg_status);
- if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- pr_debug("KW: nack on data write (%x): %x\n",
- iface->data[-1], ack);
- do_stop(iface, -EIO);
- } else if (iface->datalen) {
- write_reg(reg_data, *(iface->data++));
- iface->datalen--;
- } else {
- write_reg(reg_control, KW_I2C_CTL_STOP);
- iface->state = state_stop;
- iface->result = 0;
- }
- write_reg(reg_isr, KW_I2C_IRQ_DATA);
- } else {
- write_reg(reg_isr, KW_I2C_IRQ_DATA);
- WRONG_STATE("KW_I2C_IRQ_DATA");
- if (iface->state != state_stop)
- do_stop(iface, -EIO);
- }
- }
-
- if (isr & KW_I2C_IRQ_STOP) {
- write_reg(reg_isr, KW_I2C_IRQ_STOP);
- if (iface->state != state_stop) {
- WRONG_STATE("KW_I2C_IRQ_STOP");
- iface->result = -EIO;
- }
- iface->state = state_idle;
- write_reg(reg_ier, 0x00);
-#ifndef POLLED_MODE
- complete(&iface->complete);
-#endif /* POLLED_MODE */
- }
-
- if (isr & KW_I2C_IRQ_START)
- write_reg(reg_isr, KW_I2C_IRQ_START);
-}
-
-#ifndef POLLED_MODE
-
-/* Interrupt handler */
-static irqreturn_t
-keywest_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct keywest_iface *iface = (struct keywest_iface *)dev_id;
- unsigned long flags;
-
- spin_lock_irqsave(&iface->lock, flags);
- del_timer(&iface->timeout_timer);
- handle_interrupt(iface, read_reg(reg_isr));
- if (iface->state != state_idle) {
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
- }
- spin_unlock_irqrestore(&iface->lock, flags);
- return IRQ_HANDLED;
-}
-
-static void
-keywest_timeout(unsigned long data)
-{
- struct keywest_iface *iface = (struct keywest_iface *)data;
- unsigned long flags;
-
- pr_debug("timeout !\n");
- spin_lock_irqsave(&iface->lock, flags);
- handle_interrupt(iface, read_reg(reg_isr));
- if (iface->state != state_idle) {
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
- }
- spin_unlock_irqrestore(&iface->lock, flags);
-}
-
-#endif /* POLLED_MODE */
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32
-keywest_smbus_xfer( struct i2c_adapter* adap,
- u16 addr,
- unsigned short flags,
- char read_write,
- u8 command,
- int size,
- union i2c_smbus_data* data)
-{
- struct keywest_chan* chan = i2c_get_adapdata(adap);
- struct keywest_iface* iface = chan->iface;
- int len;
- u8* buffer;
- u16 cur_word;
- int rc = 0;
-
- if (iface->state == state_dead)
- return -ENXIO;
-
- /* Prepare datas & select mode */
- iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- switch (size) {
- case I2C_SMBUS_QUICK:
- len = 0;
- buffer = NULL;
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
- break;
- case I2C_SMBUS_BYTE:
- len = 1;
- buffer = &data->byte;
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
- break;
- case I2C_SMBUS_BYTE_DATA:
- len = 1;
- buffer = &data->byte;
- iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
- break;
- case I2C_SMBUS_WORD_DATA:
- len = 2;
- cur_word = cpu_to_le16(data->word);
- buffer = (u8 *)&cur_word;
- iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
- break;
- case I2C_SMBUS_BLOCK_DATA:
- len = data->block[0];
- buffer = &data->block[1];
- iface->cur_mode |= KW_I2C_MODE_STANDARDSUB;
- break;
- default:
- return -1;
- }
-
- /* Turn a standardsub read into a combined mode access */
- if (read_write == I2C_SMBUS_READ
- && (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB) {
- iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- iface->cur_mode |= KW_I2C_MODE_COMBINED;
- }
-
- /* Original driver had this limitation */
- if (len > 32)
- len = 32;
-
- if (pmac_low_i2c_lock(iface->node))
- return -ENXIO;
-
- pr_debug("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n",
- chan->chan_no, addr, len, read_write == I2C_SMBUS_READ);
-
- iface->data = buffer;
- iface->datalen = len;
- iface->state = state_addr;
- iface->result = 0;
- iface->read_write = read_write;
-
- /* Setup channel & clear pending irqs */
- write_reg(reg_isr, read_reg(reg_isr));
- write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
- write_reg(reg_status, 0);
-
- /* Set up address and r/w bit */
- write_reg(reg_addr,
- (addr << 1) | ((read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
- /* Set up the sub address */
- if ((iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
- || (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
- write_reg(reg_subaddr, command);
-
-#ifndef POLLED_MODE
- /* Arm timeout */
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
-#endif
-
- /* Start sending address & enable interrupt*/
- write_reg(reg_control, KW_I2C_CTL_XADDR);
- write_reg(reg_ier, KW_I2C_IRQ_MASK);
-
-#ifdef POLLED_MODE
- pr_debug("using polled mode...\n");
- /* State machine, to turn into an interrupt handler */
- while(iface->state != state_idle) {
- unsigned long flags;
-
- u8 isr = wait_interrupt(iface);
- spin_lock_irqsave(&iface->lock, flags);
- handle_interrupt(iface, isr);
- spin_unlock_irqrestore(&iface->lock, flags);
- }
-#else /* POLLED_MODE */
- pr_debug("using interrupt mode...\n");
- wait_for_completion(&iface->complete);
-#endif /* POLLED_MODE */
-
- rc = iface->result;
- pr_debug("transfer done, result: %d\n", rc);
-
- if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ)
- data->word = le16_to_cpu(cur_word);
-
- /* Release sem */
- pmac_low_i2c_unlock(iface->node);
-
- return rc;
-}
-
-/*
- * Generic i2c master transfer entrypoint
- */
-static int
-keywest_xfer( struct i2c_adapter *adap,
- struct i2c_msg *msgs,
- int num)
-{
- struct keywest_chan* chan = i2c_get_adapdata(adap);
- struct keywest_iface* iface = chan->iface;
- struct i2c_msg *pmsg;
- int i, completed;
- int rc = 0;
-
- if (iface->state == state_dead)
- return -ENXIO;
-
- if (pmac_low_i2c_lock(iface->node))
- return -ENXIO;
-
- /* Set adapter to standard mode */
- iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK;
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
-
- completed = 0;
- for (i = 0; rc >= 0 && i < num;) {
- u8 addr;
-
- pmsg = &msgs[i++];
- addr = pmsg->addr;
- if (pmsg->flags & I2C_M_TEN) {
- printk(KERN_ERR "i2c-keywest: 10 bits addr not supported !\n");
- rc = -EINVAL;
- break;
- }
- pr_debug("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n",
- chan->chan_no,
- pmsg->flags & I2C_M_RD ? "read" : "write",
- pmsg->len, addr, i, num);
-
- /* Setup channel & clear pending irqs */
- write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4));
- write_reg(reg_isr, read_reg(reg_isr));
- write_reg(reg_status, 0);
-
- iface->data = pmsg->buf;
- iface->datalen = pmsg->len;
- iface->state = state_addr;
- iface->result = 0;
- if (pmsg->flags & I2C_M_RD)
- iface->read_write = I2C_SMBUS_READ;
- else
- iface->read_write = I2C_SMBUS_WRITE;
-
- /* Set up address and r/w bit */
- if (pmsg->flags & I2C_M_REV_DIR_ADDR)
- addr ^= 1;
- write_reg(reg_addr,
- (addr << 1) |
- ((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00));
-
-#ifndef POLLED_MODE
- /* Arm timeout */
- iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
- add_timer(&iface->timeout_timer);
-#endif
-
- /* Start sending address & enable interrupt*/
- write_reg(reg_ier, KW_I2C_IRQ_MASK);
- write_reg(reg_control, KW_I2C_CTL_XADDR);
-
-#ifdef POLLED_MODE
- pr_debug("using polled mode...\n");
- /* State machine, to turn into an interrupt handler */
- while(iface->state != state_idle) {
- u8 isr = wait_interrupt(iface);
- handle_interrupt(iface, isr);
- }
-#else /* POLLED_MODE */
- pr_debug("using interrupt mode...\n");
- wait_for_completion(&iface->complete);
-#endif /* POLLED_MODE */
-
- rc = iface->result;
- if (rc == 0)
- completed++;
- pr_debug("transfer done, result: %d\n", rc);
- }
-
- /* Release sem */
- pmac_low_i2c_unlock(iface->node);
-
- return completed;
-}
-
-static u32
-keywest_func(struct i2c_adapter * adapter)
-{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm keywest_algorithm = {
- .smbus_xfer = keywest_smbus_xfer,
- .master_xfer = keywest_xfer,
- .functionality = keywest_func,
-};
-
-
-static int
-create_iface(struct device_node *np, struct device *dev)
-{
- unsigned long steps;
- unsigned bsteps, tsize, i, nchan;
- struct keywest_iface* iface;
- u32 *psteps, *prate, *addrp;
- int rc;
-
- if (np->n_intrs < 1) {
- printk(KERN_ERR "%s: Missing interrupt !\n",
- np->full_name);
- return -ENODEV;
- }
- addrp = (u32 *)get_property(np, "AAPL,address", NULL);
- if (addrp == NULL) {
- printk(KERN_ERR "%s: Can't find address !\n",
- np->full_name);
- return -ENODEV;
- }
-
- if (pmac_low_i2c_lock(np))
- return -ENODEV;
-
- psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
- steps = psteps ? (*psteps) : 0x10;
-
- /* Hrm... maybe we can be smarter here */
- for (bsteps = 0; (steps & 0x01) == 0; bsteps++)
- steps >>= 1;
-
- if (np->parent->name[0] == 'u')
- nchan = 2;
- else
- nchan = 1;
-
- tsize = sizeof(struct keywest_iface) +
- (sizeof(struct keywest_chan) + 4) * nchan;
- iface = kzalloc(tsize, GFP_KERNEL);
- if (iface == NULL) {
- printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n");
- pmac_low_i2c_unlock(np);
- return -ENOMEM;
- }
- spin_lock_init(&iface->lock);
- init_completion(&iface->complete);
- iface->node = of_node_get(np);
- iface->bsteps = bsteps;
- iface->chan_count = nchan;
- iface->state = state_idle;
- iface->irq = np->intrs[0].line;
- iface->channels = (struct keywest_chan *)
- (((unsigned long)(iface + 1) + 3UL) & ~3UL);
- iface->base = ioremap(*addrp, 0x1000);
- if (!iface->base) {
- printk(KERN_ERR "i2c-keywest: can't map inteface !\n");
- kfree(iface);
- pmac_low_i2c_unlock(np);
- return -ENOMEM;
- }
-
-#ifndef POLLED_MODE
- init_timer(&iface->timeout_timer);
- iface->timeout_timer.function = keywest_timeout;
- iface->timeout_timer.data = (unsigned long)iface;
-#endif
-
- /* Select interface rate */
- iface->cur_mode = KW_I2C_MODE_100KHZ;
- prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
- if (prate) switch(*prate) {
- case 100:
- iface->cur_mode = KW_I2C_MODE_100KHZ;
- break;
- case 50:
- iface->cur_mode = KW_I2C_MODE_50KHZ;
- break;
- case 25:
- iface->cur_mode = KW_I2C_MODE_25KHZ;
- break;
- default:
- printk(KERN_WARNING "i2c-keywest: unknown rate %ldKhz, using 100KHz\n",
- (long)*prate);
- }
-
- /* Select standard mode by default */
- iface->cur_mode |= KW_I2C_MODE_STANDARD;
-
- /* Write mode */
- write_reg(reg_mode, iface->cur_mode);
-
- /* Switch interrupts off & clear them*/
- write_reg(reg_ier, 0x00);
- write_reg(reg_isr, KW_I2C_IRQ_MASK);
-
-#ifndef POLLED_MODE
- /* Request chip interrupt */
- rc = request_irq(iface->irq, keywest_irq, SA_INTERRUPT, "keywest i2c", iface);
- if (rc) {
- printk(KERN_ERR "i2c-keywest: can't get IRQ %d !\n", iface->irq);
- iounmap(iface->base);
- kfree(iface);
- pmac_low_i2c_unlock(np);
- return -ENODEV;
- }
-#endif /* POLLED_MODE */
-
- pmac_low_i2c_unlock(np);
- dev_set_drvdata(dev, iface);
-
- for (i=0; i<nchan; i++) {
- struct keywest_chan* chan = &iface->channels[i];
-
- sprintf(chan->adapter.name, "%s %d", np->parent->name, i);
- chan->iface = iface;
- chan->chan_no = i;
- chan->adapter.algo = &keywest_algorithm;
- chan->adapter.algo_data = NULL;
- chan->adapter.client_register = NULL;
- chan->adapter.client_unregister = NULL;
- i2c_set_adapdata(&chan->adapter, chan);
- chan->adapter.dev.parent = dev;
-
- rc = i2c_add_adapter(&chan->adapter);
- if (rc) {
- printk("i2c-keywest.c: Adapter %s registration failed\n",
- chan->adapter.name);
- i2c_set_adapdata(&chan->adapter, NULL);
- }
- }
-
- printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n",
- np->parent->name, nchan, nchan > 1 ? "s" : "", bsteps);
-
- return 0;
-}
-
-static int
-dispose_iface(struct device *dev)
-{
- struct keywest_iface *iface = dev_get_drvdata(dev);
- int i, rc;
-
- /* Make sure we stop all activity */
- if (pmac_low_i2c_lock(iface->node))
- return -ENODEV;
-
-#ifndef POLLED_MODE
- spin_lock_irq(&iface->lock);
- while (iface->state != state_idle) {
- spin_unlock_irq(&iface->lock);
- msleep(100);
- spin_lock_irq(&iface->lock);
- }
-#endif /* POLLED_MODE */
- iface->state = state_dead;
-#ifndef POLLED_MODE
- spin_unlock_irq(&iface->lock);
- free_irq(iface->irq, iface);
-#endif /* POLLED_MODE */
-
- pmac_low_i2c_unlock(iface->node);
-
- /* Release all channels */
- for (i=0; i<iface->chan_count; i++) {
- struct keywest_chan* chan = &iface->channels[i];
- if (i2c_get_adapdata(&chan->adapter) == NULL)
- continue;
- rc = i2c_del_adapter(&chan->adapter);
- i2c_set_adapdata(&chan->adapter, NULL);
- /* We aren't that prepared to deal with this... */
- if (rc)
- printk("i2c-keywest.c: i2c_del_adapter failed, that's bad !\n");
- }
- iounmap(iface->base);
- dev_set_drvdata(dev, NULL);
- of_node_put(iface->node);
- kfree(iface);
-
- return 0;
-}
-
-static int
-create_iface_macio(struct macio_dev* dev, const struct of_device_id *match)
-{
- return create_iface(dev->ofdev.node, &dev->ofdev.dev);
-}
-
-static int
-dispose_iface_macio(struct macio_dev* dev)
-{
- return dispose_iface(&dev->ofdev.dev);
-}
-
-static int
-create_iface_of_platform(struct of_device* dev, const struct of_device_id *match)
-{
- return create_iface(dev->node, &dev->dev);
-}
-
-static int
-dispose_iface_of_platform(struct of_device* dev)
-{
- return dispose_iface(&dev->dev);
-}
-
-static struct of_device_id i2c_keywest_match[] =
-{
- {
- .type = "i2c",
- .compatible = "keywest"
- },
- {},
-};
-
-static struct macio_driver i2c_keywest_macio_driver =
-{
- .owner = THIS_MODULE,
- .name = "i2c-keywest",
- .match_table = i2c_keywest_match,
- .probe = create_iface_macio,
- .remove = dispose_iface_macio
-};
-
-static struct of_platform_driver i2c_keywest_of_platform_driver =
-{
- .owner = THIS_MODULE,
- .name = "i2c-keywest",
- .match_table = i2c_keywest_match,
- .probe = create_iface_of_platform,
- .remove = dispose_iface_of_platform
-};
-
-static int __init
-i2c_keywest_init(void)
-{
- of_register_driver(&i2c_keywest_of_platform_driver);
- macio_register_driver(&i2c_keywest_macio_driver);
-
- return 0;
-}
-
-static void __exit
-i2c_keywest_cleanup(void)
-{
- of_unregister_driver(&i2c_keywest_of_platform_driver);
- macio_unregister_driver(&i2c_keywest_macio_driver);
-}
-
-module_init(i2c_keywest_init);
-module_exit(i2c_keywest_cleanup);
+++ /dev/null
-#ifndef __I2C_KEYWEST_H__
-#define __I2C_KEYWEST_H__
-
-/* The Tumbler audio equalizer can be really slow sometimes */
-#define POLL_TIMEOUT (2*HZ)
-
-/* Register indices */
-typedef enum {
- reg_mode = 0,
- reg_control,
- reg_status,
- reg_isr,
- reg_ier,
- reg_addr,
- reg_subaddr,
- reg_data
-} reg_t;
-
-
-/* Mode register */
-#define KW_I2C_MODE_100KHZ 0x00
-#define KW_I2C_MODE_50KHZ 0x01
-#define KW_I2C_MODE_25KHZ 0x02
-#define KW_I2C_MODE_DUMB 0x00
-#define KW_I2C_MODE_STANDARD 0x04
-#define KW_I2C_MODE_STANDARDSUB 0x08
-#define KW_I2C_MODE_COMBINED 0x0C
-#define KW_I2C_MODE_MODE_MASK 0x0C
-#define KW_I2C_MODE_CHAN_MASK 0xF0
-
-/* Control register */
-#define KW_I2C_CTL_AAK 0x01
-#define KW_I2C_CTL_XADDR 0x02
-#define KW_I2C_CTL_STOP 0x04
-#define KW_I2C_CTL_START 0x08
-
-/* Status register */
-#define KW_I2C_STAT_BUSY 0x01
-#define KW_I2C_STAT_LAST_AAK 0x02
-#define KW_I2C_STAT_LAST_RW 0x04
-#define KW_I2C_STAT_SDA 0x08
-#define KW_I2C_STAT_SCL 0x10
-
-/* IER & ISR registers */
-#define KW_I2C_IRQ_DATA 0x01
-#define KW_I2C_IRQ_ADDR 0x02
-#define KW_I2C_IRQ_STOP 0x04
-#define KW_I2C_IRQ_START 0x08
-#define KW_I2C_IRQ_MASK 0x0F
-
-/* Physical interface */
-struct keywest_iface
-{
- struct device_node *node;
- void __iomem * base;
- unsigned bsteps;
- int irq;
- spinlock_t lock;
- struct keywest_chan *channels;
- unsigned chan_count;
- u8 cur_mode;
- char read_write;
- u8 *data;
- unsigned datalen;
- int state;
- int result;
- struct timer_list timeout_timer;
- struct completion complete;
-};
-
-enum {
- state_idle,
- state_addr,
- state_read,
- state_write,
- state_stop,
- state_dead
-};
-
-/* Channel on an interface */
-struct keywest_chan
-{
- struct i2c_adapter adapter;
- struct keywest_iface* iface;
- unsigned chan_no;
-};
-
-/* Register access */
-
-static inline u8 __read_reg(struct keywest_iface *iface, reg_t reg)
-{
- return in_8(iface->base
- + (((unsigned)reg) << iface->bsteps));
-}
-
-static inline void __write_reg(struct keywest_iface *iface, reg_t reg, u8 val)
-{
- out_8(iface->base
- + (((unsigned)reg) << iface->bsteps), val);
- (void)__read_reg(iface, reg_subaddr);
-}
-
-#define write_reg(reg, val) __write_reg(iface, reg, val)
-#define read_reg(reg) __read_reg(iface, reg)
-
-
-
-#endif /* __I2C_KEYWEST_H__ */
+++ /dev/null
-/*
- i2c Support for Apple SMU Controller
-
- Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
- <benh@kernel.crashing.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/completion.h>
-#include <linux/device.h>
-#include <asm/prom.h>
-#include <asm/of_device.h>
-#include <asm/smu.h>
-
-static int probe;
-
-MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
-MODULE_DESCRIPTION("I2C driver for Apple's SMU");
-MODULE_LICENSE("GPL");
-module_param(probe, bool, 0);
-
-
-/* Physical interface */
-struct smu_iface
-{
- struct i2c_adapter adapter;
- struct completion complete;
- u32 busid;
-};
-
-static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc)
-{
- struct smu_iface *iface = misc;
- complete(&iface->complete);
-}
-
-/*
- * SMBUS-type transfer entrypoint
- */
-static s32 smu_smbus_xfer( struct i2c_adapter* adap,
- u16 addr,
- unsigned short flags,
- char read_write,
- u8 command,
- int size,
- union i2c_smbus_data* data)
-{
- struct smu_iface *iface = i2c_get_adapdata(adap);
- struct smu_i2c_cmd cmd;
- int rc = 0;
- int read = (read_write == I2C_SMBUS_READ);
-
- cmd.info.bus = iface->busid;
- cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00);
-
- /* Prepare datas & select mode */
- switch (size) {
- case I2C_SMBUS_QUICK:
- cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
- cmd.info.datalen = 0;
- break;
- case I2C_SMBUS_BYTE:
- cmd.info.type = SMU_I2C_TRANSFER_SIMPLE;
- cmd.info.datalen = 1;
- if (!read)
- cmd.info.data[0] = data->byte;
- break;
- case I2C_SMBUS_BYTE_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = 1;
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- if (!read)
- cmd.info.data[0] = data->byte;
- break;
- case I2C_SMBUS_WORD_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = 2;
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- if (!read) {
- cmd.info.data[0] = data->word & 0xff;
- cmd.info.data[1] = (data->word >> 8) & 0xff;
- }
- break;
- /* Note that these are broken vs. the expected smbus API where
- * on reads, the lenght is actually returned from the function,
- * but I think the current API makes no sense and I don't want
- * any driver that I haven't verified for correctness to go
- * anywhere near a pmac i2c bus anyway ...
- */
- case I2C_SMBUS_BLOCK_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = data->block[0] + 1;
- if (cmd.info.datalen > (SMU_I2C_WRITE_MAX + 1))
- return -EINVAL;
- if (!read)
- memcpy(cmd.info.data, data->block, cmd.info.datalen);
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- cmd.info.type = SMU_I2C_TRANSFER_STDSUB;
- cmd.info.datalen = data->block[0];
- if (cmd.info.datalen > 7)
- return -EINVAL;
- if (!read)
- memcpy(cmd.info.data, &data->block[1],
- cmd.info.datalen);
- cmd.info.sublen = 1;
- cmd.info.subaddr[0] = command;
- cmd.info.subaddr[1] = 0;
- cmd.info.subaddr[2] = 0;
- break;
-
- default:
- return -EINVAL;
- }
-
- /* Turn a standardsub read into a combined mode access */
- if (read_write == I2C_SMBUS_READ &&
- cmd.info.type == SMU_I2C_TRANSFER_STDSUB)
- cmd.info.type = SMU_I2C_TRANSFER_COMBINED;
-
- /* Finish filling command and submit it */
- cmd.done = smu_i2c_done;
- cmd.misc = iface;
- rc = smu_queue_i2c(&cmd);
- if (rc < 0)
- return rc;
- wait_for_completion(&iface->complete);
- rc = cmd.status;
-
- if (!read || rc < 0)
- return rc;
-
- switch (size) {
- case I2C_SMBUS_BYTE:
- case I2C_SMBUS_BYTE_DATA:
- data->byte = cmd.info.data[0];
- break;
- case I2C_SMBUS_WORD_DATA:
- data->word = ((u16)cmd.info.data[1]) << 8;
- data->word |= cmd.info.data[0];
- break;
- /* Note that these are broken vs. the expected smbus API where
- * on reads, the lenght is actually returned from the function,
- * but I think the current API makes no sense and I don't want
- * any driver that I haven't verified for correctness to go
- * anywhere near a pmac i2c bus anyway ...
- */
- case I2C_SMBUS_BLOCK_DATA:
- case I2C_SMBUS_I2C_BLOCK_DATA:
- memcpy(&data->block[0], cmd.info.data, cmd.info.datalen);
- break;
- }
-
- return rc;
-}
-
-static u32
-smu_smbus_func(struct i2c_adapter * adapter)
-{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA;
-}
-
-/* For now, we only handle combined mode (smbus) */
-static struct i2c_algorithm smu_algorithm = {
- .smbus_xfer = smu_smbus_xfer,
- .functionality = smu_smbus_func,
-};
-
-static int create_iface(struct device_node *np, struct device *dev)
-{
- struct smu_iface* iface;
- u32 *reg, busid;
- int rc;
-
- reg = (u32 *)get_property(np, "reg", NULL);
- if (reg == NULL) {
- printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n");
- return -ENXIO;
- }
- busid = *reg;
-
- iface = kzalloc(sizeof(struct smu_iface), GFP_KERNEL);
- if (iface == NULL) {
- printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n");
- return -ENOMEM;
- }
- init_completion(&iface->complete);
- iface->busid = busid;
-
- dev_set_drvdata(dev, iface);
-
- sprintf(iface->adapter.name, "smu-i2c-%02x", busid);
- iface->adapter.algo = &smu_algorithm;
- iface->adapter.algo_data = NULL;
- iface->adapter.client_register = NULL;
- iface->adapter.client_unregister = NULL;
- i2c_set_adapdata(&iface->adapter, iface);
- iface->adapter.dev.parent = dev;
-
- rc = i2c_add_adapter(&iface->adapter);
- if (rc) {
- printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration "
- "failed\n", iface->adapter.name);
- i2c_set_adapdata(&iface->adapter, NULL);
- }
-
- if (probe) {
- unsigned char addr;
- printk("Probe: ");
- for (addr = 0x00; addr <= 0x7f; addr++) {
- if (i2c_smbus_xfer(&iface->adapter,addr,
- 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
- printk("%02x ", addr);
- }
- printk("\n");
- }
-
- printk(KERN_INFO "SMU i2c bus %x registered\n", busid);
-
- return 0;
-}
-
-static int dispose_iface(struct device *dev)
-{
- struct smu_iface *iface = dev_get_drvdata(dev);
- int rc;
-
- rc = i2c_del_adapter(&iface->adapter);
- i2c_set_adapdata(&iface->adapter, NULL);
- /* We aren't that prepared to deal with this... */
- if (rc)
- printk("i2c-pmac-smu.c: Failed to remove bus %s !\n",
- iface->adapter.name);
- dev_set_drvdata(dev, NULL);
- kfree(iface);
-
- return 0;
-}
-
-
-static int create_iface_of_platform(struct of_device* dev,
- const struct of_device_id *match)
-{
- struct device_node *node = dev->node;
-
- if (device_is_compatible(node, "smu-i2c") ||
- (node->parent != NULL &&
- device_is_compatible(node->parent, "smu-i2c-control")))
- return create_iface(node, &dev->dev);
- return -ENODEV;
-}
-
-
-static int dispose_iface_of_platform(struct of_device* dev)
-{
- return dispose_iface(&dev->dev);
-}
-
-
-static struct of_device_id i2c_smu_match[] =
-{
- {
- .compatible = "smu-i2c",
- },
- {
- .compatible = "i2c-bus",
- },
- {},
-};
-static struct of_platform_driver i2c_smu_of_platform_driver =
-{
- .name = "i2c-smu",
- .match_table = i2c_smu_match,
- .probe = create_iface_of_platform,
- .remove = dispose_iface_of_platform
-};
-
-
-static int __init i2c_pmac_smu_init(void)
-{
- of_register_driver(&i2c_smu_of_platform_driver);
- return 0;
-}
-
-
-static void __exit i2c_pmac_smu_cleanup(void)
-{
- of_unregister_driver(&i2c_smu_of_platform_driver);
-}
-
-module_init(i2c_pmac_smu_init);
-module_exit(i2c_pmac_smu_cleanup);
--- /dev/null
+/*
+ i2c Support for Apple SMU Controller
+
+ Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp.
+ <benh@kernel.crashing.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/prom.h>
+#include <asm/pmac_low_i2c.h>
+
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("I2C driver for Apple PowerMac");
+MODULE_LICENSE("GPL");
+
+/*
+ * SMBUS-type transfer entrypoint
+ */
+static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
+ u16 addr,
+ unsigned short flags,
+ char read_write,
+ u8 command,
+ int size,
+ union i2c_smbus_data* data)
+{
+ struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
+ int rc = 0;
+ int read = (read_write == I2C_SMBUS_READ);
+ int addrdir = (addr << 1) | read;
+ u8 local[2];
+
+ rc = pmac_i2c_open(bus, 0);
+ if (rc)
+ return rc;
+
+ switch (size) {
+ case I2C_SMBUS_QUICK:
+ rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0);
+ break;
+ case I2C_SMBUS_BYTE:
+ rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1);
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1);
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ if (!read) {
+ local[0] = data->word & 0xff;
+ local[1] = (data->word >> 8) & 0xff;
+ }
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2);
+ if (rc == 0 && read) {
+ data->word = ((u16)local[1]) << 8;
+ data->word |= local[0];
+ }
+ break;
+
+ /* Note that these are broken vs. the expected smbus API where
+ * on reads, the lenght is actually returned from the function,
+ * but I think the current API makes no sense and I don't want
+ * any driver that I haven't verified for correctness to go
+ * anywhere near a pmac i2c bus anyway ...
+ *
+ * I'm also not completely sure what kind of phases to do between
+ * the actual command and the data (what I am _supposed_ to do that
+ * is). For now, I assume writes are a single stream and reads have
+ * a repeat start/addr phase (but not stop in between)
+ */
+ case I2C_SMBUS_BLOCK_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block,
+ data->block[0] + 1);
+
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ rc = pmac_i2c_setmode(bus, read ?
+ pmac_i2c_mode_combined :
+ pmac_i2c_mode_stdsub);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 1, command,
+ read ? data->block : &data->block[1],
+ data->block[0]);
+ break;
+
+ default:
+ rc = -EINVAL;
+ }
+ bail:
+ pmac_i2c_close(bus);
+ return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint. This driver only support single
+ * messages (for "lame i2c" transfers). Anything else should use the smbus
+ * entry point
+ */
+static int i2c_powermac_master_xfer( struct i2c_adapter *adap,
+ struct i2c_msg *msgs,
+ int num)
+{
+ struct pmac_i2c_bus *bus = i2c_get_adapdata(adap);
+ int rc = 0;
+ int read;
+ int addrdir;
+
+ if (num != 1)
+ return -EINVAL;
+ if (msgs->flags & I2C_M_TEN)
+ return -EINVAL;
+ read = (msgs->flags & I2C_M_RD) != 0;
+ addrdir = (msgs->addr << 1) | read;
+ if (msgs->flags & I2C_M_REV_DIR_ADDR)
+ addrdir ^= 1;
+
+ rc = pmac_i2c_open(bus, 0);
+ if (rc)
+ return rc;
+ rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
+ if (rc)
+ goto bail;
+ rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
+ bail:
+ pmac_i2c_close(bus);
+ return rc < 0 ? rc : msgs->len;
+}
+
+static u32 i2c_powermac_func(struct i2c_adapter * adapter)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_I2C;
+}
+
+/* For now, we only handle smbus */
+static struct i2c_algorithm i2c_powermac_algorithm = {
+ .smbus_xfer = i2c_powermac_smbus_xfer,
+ .master_xfer = i2c_powermac_master_xfer,
+ .functionality = i2c_powermac_func,
+};
+
+
+static int i2c_powermac_remove(struct device *dev)
+{
+ struct i2c_adapter *adapter = dev_get_drvdata(dev);
+ struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter);
+ int rc;
+
+ rc = i2c_del_adapter(adapter);
+ pmac_i2c_detach_adapter(bus, adapter);
+ i2c_set_adapdata(adapter, NULL);
+ /* We aren't that prepared to deal with this... */
+ if (rc)
+ printk("i2c-powermac.c: Failed to remove bus %s !\n",
+ adapter->name);
+ dev_set_drvdata(dev, NULL);
+ kfree(adapter);
+
+ return 0;
+}
+
+
+static int i2c_powermac_probe(struct device *dev)
+{
+ struct pmac_i2c_bus *bus = dev->platform_data;
+ struct device_node *parent = NULL;
+ struct i2c_adapter *adapter;
+ char name[32], *basename;
+ int rc;
+
+ if (bus == NULL)
+ return -EINVAL;
+
+ /* Ok, now we need to make up a name for the interface that will
+ * match what we used to do in the past, that is basically the
+ * controller's parent device node for keywest. PMU didn't have a
+ * naming convention and SMU has a different one
+ */
+ switch(pmac_i2c_get_type(bus)) {
+ case pmac_i2c_bus_keywest:
+ parent = of_get_parent(pmac_i2c_get_controller(bus));
+ if (parent == NULL)
+ return -EINVAL;
+ basename = parent->name;
+ break;
+ case pmac_i2c_bus_pmu:
+ basename = "pmu";
+ break;
+ case pmac_i2c_bus_smu:
+ /* This is not what we used to do but I'm fixing drivers at
+ * the same time as this change
+ */
+ basename = "smu";
+ break;
+ default:
+ return -EINVAL;
+ }
+ snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus));
+ of_node_put(parent);
+
+ adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
+ if (adapter == NULL) {
+ printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n");
+ return -ENOMEM;
+ }
+ dev_set_drvdata(dev, adapter);
+ strcpy(adapter->name, name);
+ adapter->algo = &i2c_powermac_algorithm;
+ i2c_set_adapdata(adapter, bus);
+ adapter->dev.parent = dev;
+ pmac_i2c_attach_adapter(bus, adapter);
+ rc = i2c_add_adapter(adapter);
+ if (rc) {
+ printk(KERN_ERR "i2c-powermac: Adapter %s registration "
+ "failed\n", name);
+ i2c_set_adapdata(adapter, NULL);
+ pmac_i2c_detach_adapter(bus, adapter);
+ }
+
+ printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+ return rc;
+}
+
+
+static struct device_driver i2c_powermac_driver = {
+ .name = "i2c-powermac",
+ .bus = &platform_bus_type,
+ .probe = i2c_powermac_probe,
+ .remove = i2c_powermac_remove,
+};
+
+static int __init i2c_powermac_init(void)
+{
+ driver_register(&i2c_powermac_driver);
+ return 0;
+}
+
+
+static void __exit i2c_powermac_cleanup(void)
+{
+ driver_unregister(&i2c_powermac_driver);
+}
+
+module_init(i2c_powermac_init);
+module_exit(i2c_powermac_cleanup);
config THERM_WINDTUNNEL
tristate "Support for thermal management on Windtunnel G4s"
- depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the desktop
G4 "Windtunnel"
config THERM_ADT746X
tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
- depends on I2C && I2C_KEYWEST && PPC_PMAC && !PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
help
This driver provides some thermostat and fan control for the
iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
config THERM_PM72
tristate "Support for thermal management on PowerMac G5"
- depends on I2C && I2C_KEYWEST && PPC_PMAC64
+ depends on I2C && I2C_POWERMAC && PPC_PMAC64
help
This driver provides thermostat and fan control for the desktop
G5 machines.
config WINDFARM_PM81
tristate "Support for thermal management on iMac G5"
depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
- select I2C_PMAC_SMU
+ select I2C_POWERMAC
help
This driver provides thermal control for the iMacG5
config WINDFARM_PM91
tristate "Support for thermal management on PowerMac9,1"
depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
- select I2C_PMAC_SMU
+ select I2C_POWERMAC
help
This driver provides thermal control for the PowerMac9,1
which is the recent (SMU based) single CPU desktop G5
* sysfs visibility
*/
-static void smu_create_i2c(struct device_node *np)
-{
- char name[32];
- u32 *reg = (u32 *)get_property(np, "reg", NULL);
-
- if (reg != NULL) {
- sprintf(name, "smu-i2c-%02x", *reg);
- of_platform_device_create(np, name, &smu->of_dev->dev);
- }
-}
-
static void smu_expose_childs(void *unused)
{
- struct device_node *np, *gp;
-
- for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) {
- if (device_is_compatible(np, "smu-i2c-control")) {
- gp = NULL;
- while ((gp = of_get_next_child(np, gp)) != NULL)
- if (device_is_compatible(gp, "i2c-bus"))
- smu_create_i2c(gp);
- } else if (device_is_compatible(np, "smu-i2c"))
- smu_create_i2c(np);
+ struct device_node *np;
+
+ for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;)
if (device_is_compatible(np, "smu-sensors"))
of_platform_device_create(np, "smu-sensors",
&smu->of_dev->dev);
- }
-
}
static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs, NULL);
#include <asm/io.h>
#include <asm/system.h>
#include <asm/sections.h>
+#include <asm/pmac_low_i2c.h>
#include "windfarm.h"
static int wf_lm75_attach(struct i2c_adapter *adapter)
{
- u8 bus_id;
- struct device_node *smu, *bus, *dev;
-
- /* We currently only deal with LM75's hanging off the SMU
- * i2c busses. If we extend that driver to other/older
- * machines, we should split this function into SMU-i2c,
- * keywest-i2c, PMU-i2c, ...
- */
+ struct device_node *busnode, *dev;
+ struct pmac_i2c_bus *bus;
DBG("wf_lm75: adapter %s detected\n", adapter->name);
- if (strncmp(adapter->name, "smu-i2c-", 8) != 0)
- return 0;
- smu = of_find_node_by_type(NULL, "smu");
- if (smu == NULL)
- return 0;
-
- /* Look for the bus in the device-tree */
- bus_id = (u8)simple_strtoul(adapter->name + 8, NULL, 16);
-
- DBG("wf_lm75: bus ID is %x\n", bus_id);
-
- /* Look for sensors subdir */
- for (bus = NULL;
- (bus = of_get_next_child(smu, bus)) != NULL;) {
- u32 *reg;
-
- if (strcmp(bus->name, "i2c"))
- continue;
- reg = (u32 *)get_property(bus, "reg", NULL);
- if (reg == NULL)
- continue;
- if (bus_id == *reg)
- break;
- }
- of_node_put(smu);
- if (bus == NULL) {
- printk(KERN_WARNING "windfarm: SMU i2c bus 0x%x not found"
- " in device-tree !\n", bus_id);
- return 0;
- }
+ bus = pmac_i2c_adapter_to_bus(adapter);
+ if (bus == NULL)
+ return -ENODEV;
+ busnode = pmac_i2c_get_bus_node(bus);
DBG("wf_lm75: bus found, looking for device...\n");
/* Now look for lm75(s) in there */
for (dev = NULL;
- (dev = of_get_next_child(bus, dev)) != NULL;) {
+ (dev = of_get_next_child(busnode, dev)) != NULL;) {
const char *loc =
get_property(dev, "hwsensor-location", NULL);
u32 *reg = (u32 *)get_property(dev, "reg", NULL);
else if (device_is_compatible(dev, "ds1775"))
wf_lm75_create(adapter, *reg, 1, loc);
}
-
- of_node_put(bus);
-
return 0;
}
extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus);
extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus);
extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus);
/* i2c layer adapter attach/detach */
extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
struct i2c_adapter *adapter);
extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus);
+extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter);
/* March a device or bus with an i2c adapter structure, to be used by drivers
* to match device-tree nodes with i2c adapters during adapter discovery
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff