static int i2o_hrt_get(struct i2o_controller *c);
/**
- * i2o_msg_nop - Returns a message which is not used
- * @c: I2O controller from which the message was created
- * @m: message which should be returned
- *
- * If you fetch a message via i2o_msg_get, and can't use it, you must
- * return the message with this function. Otherwise the message frame
- * is lost.
- */
-void i2o_msg_nop(struct i2o_controller *c, u32 m)
-{
- struct i2o_message __iomem *msg = i2o_msg_in_to_virt(c, m);
-
- writel(THREE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
- writel(I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID,
- &msg->u.head[1]);
- writel(0, &msg->u.head[2]);
- writel(0, &msg->u.head[3]);
- i2o_msg_post(c, m);
-};
-
-/**
* i2o_msg_get_wait - obtain an I2O message from the IOP
* @c: I2O controller
* @msg: pointer to a I2O message pointer
* address from the read port (see the i2o spec). If no message is
* available returns I2O_QUEUE_EMPTY and msg is leaved untouched.
*/
-u32 i2o_msg_get_wait(struct i2o_controller *c,
- struct i2o_message __iomem ** msg, int wait)
+struct i2o_message *i2o_msg_get_wait(struct i2o_controller *c, int wait)
{
unsigned long timeout = jiffies + wait * HZ;
- u32 m;
+ struct i2o_message *msg;
- while ((m = i2o_msg_get(c, msg)) == I2O_QUEUE_EMPTY) {
+ while (IS_ERR(msg = i2o_msg_get(c))) {
if (time_after(jiffies, timeout)) {
osm_debug("%s: Timeout waiting for message frame.\n",
c->name);
- return I2O_QUEUE_EMPTY;
+ return ERR_PTR(-ETIMEDOUT);
}
schedule_timeout_uninterruptible(1);
}
- return m;
+ return msg;
};
#if BITS_PER_LONG == 64
*/
static int i2o_iop_quiesce(struct i2o_controller *c)
{
- struct i2o_message __iomem *msg;
- u32 m;
+ struct i2o_message *msg;
i2o_status_block *sb = c->status_block.virt;
int rc;
(sb->iop_state != ADAPTER_STATE_OPERATIONAL))
return 0;
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -ETIMEDOUT;
+ msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
- writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
- writel(I2O_CMD_SYS_QUIESCE << 24 | HOST_TID << 12 | ADAPTER_TID,
- &msg->u.head[1]);
+ msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0);
+ msg->u.head[1] =
+ cpu_to_le32(I2O_CMD_SYS_QUIESCE << 24 | HOST_TID << 12 |
+ ADAPTER_TID);
/* Long timeout needed for quiesce if lots of devices */
- if ((rc = i2o_msg_post_wait(c, m, 240)))
+ if ((rc = i2o_msg_post_wait(c, msg, 240)))
osm_info("%s: Unable to quiesce (status=%#x).\n", c->name, -rc);
else
osm_debug("%s: Quiesced.\n", c->name);
*/
static int i2o_iop_enable(struct i2o_controller *c)
{
- struct i2o_message __iomem *msg;
- u32 m;
+ struct i2o_message *msg;
i2o_status_block *sb = c->status_block.virt;
int rc;
if (sb->iop_state != ADAPTER_STATE_READY)
return -EINVAL;
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -ETIMEDOUT;
+ msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
- writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
- writel(I2O_CMD_SYS_ENABLE << 24 | HOST_TID << 12 | ADAPTER_TID,
- &msg->u.head[1]);
+ msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0);
+ msg->u.head[1] =
+ cpu_to_le32(I2O_CMD_SYS_ENABLE << 24 | HOST_TID << 12 |
+ ADAPTER_TID);
/* How long of a timeout do we need? */
- if ((rc = i2o_msg_post_wait(c, m, 240)))
+ if ((rc = i2o_msg_post_wait(c, msg, 240)))
osm_err("%s: Could not enable (status=%#x).\n", c->name, -rc);
else
osm_debug("%s: Enabled.\n", c->name);
*/
static int i2o_iop_clear(struct i2o_controller *c)
{
- struct i2o_message __iomem *msg;
- u32 m;
+ struct i2o_message *msg;
int rc;
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -ETIMEDOUT;
+ msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
/* Quiesce all IOPs first */
i2o_iop_quiesce_all();
- writel(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
- writel(I2O_CMD_ADAPTER_CLEAR << 24 | HOST_TID << 12 | ADAPTER_TID,
- &msg->u.head[1]);
+ msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0);
+ msg->u.head[1] =
+ cpu_to_le32(I2O_CMD_ADAPTER_CLEAR << 24 | HOST_TID << 12 |
+ ADAPTER_TID);
- if ((rc = i2o_msg_post_wait(c, m, 30)))
+ if ((rc = i2o_msg_post_wait(c, msg, 30)))
osm_info("%s: Unable to clear (status=%#x).\n", c->name, -rc);
else
osm_debug("%s: Cleared.\n", c->name);
* Clear and (re)initialize IOP's outbound queue and post the message
* frames to the IOP.
*
- * Returns 0 on success or a negative errno code on failure.
+ * Returns 0 on success or negative error code on failure.
*/
static int i2o_iop_init_outbound_queue(struct i2o_controller *c)
{
- volatile u8 *status = c->status.virt;
u32 m;
- struct i2o_message __iomem *msg;
+ volatile u8 *status = c->status.virt;
+ struct i2o_message *msg;
ulong timeout;
int i;
memset(c->status.virt, 0, 4);
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -ETIMEDOUT;
-
- writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6, &msg->u.head[0]);
- writel(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | ADAPTER_TID,
- &msg->u.head[1]);
- writel(i2o_exec_driver.context, &msg->u.s.icntxt);
- writel(0x00000000, &msg->u.s.tcntxt);
- writel(PAGE_SIZE, &msg->body[0]);
+ msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
+
+ msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6);
+ msg->u.head[1] =
+ cpu_to_le32(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 |
+ ADAPTER_TID);
+ msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context);
+ msg->u.s.tcntxt = cpu_to_le32(0x00000000);
+ msg->body[0] = cpu_to_le32(PAGE_SIZE);
/* Outbound msg frame size in words and Initcode */
- writel(I2O_OUTBOUND_MSG_FRAME_SIZE << 16 | 0x80, &msg->body[1]);
- writel(0xd0000004, &msg->body[2]);
- writel(i2o_dma_low(c->status.phys), &msg->body[3]);
- writel(i2o_dma_high(c->status.phys), &msg->body[4]);
+ msg->body[1] = cpu_to_le32(I2O_OUTBOUND_MSG_FRAME_SIZE << 16 | 0x80);
+ msg->body[2] = cpu_to_le32(0xd0000004);
+ msg->body[3] = cpu_to_le32(i2o_dma_low(c->status.phys));
+ msg->body[4] = cpu_to_le32(i2o_dma_high(c->status.phys));
- i2o_msg_post(c, m);
+ i2o_msg_post(c, msg);
timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ;
while (*status <= I2O_CMD_IN_PROGRESS) {
static int i2o_iop_reset(struct i2o_controller *c)
{
volatile u8 *status = c->status.virt;
- struct i2o_message __iomem *msg;
- u32 m;
+ struct i2o_message *msg;
unsigned long timeout;
i2o_status_block *sb = c->status_block.virt;
int rc = 0;
osm_debug("%s: Resetting controller\n", c->name);
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -ETIMEDOUT;
+ msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
memset(c->status_block.virt, 0, 8);
/* Quiesce all IOPs first */
i2o_iop_quiesce_all();
- writel(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
- writel(I2O_CMD_ADAPTER_RESET << 24 | HOST_TID << 12 | ADAPTER_TID,
- &msg->u.head[1]);
- writel(i2o_exec_driver.context, &msg->u.s.icntxt);
- writel(0, &msg->u.s.tcntxt); //FIXME: use reasonable transaction context
- writel(0, &msg->body[0]);
- writel(0, &msg->body[1]);
- writel(i2o_dma_low(c->status.phys), &msg->body[2]);
- writel(i2o_dma_high(c->status.phys), &msg->body[3]);
+ msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_0);
+ msg->u.head[1] =
+ cpu_to_le32(I2O_CMD_ADAPTER_RESET << 24 | HOST_TID << 12 |
+ ADAPTER_TID);
+ msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context);
+ msg->u.s.tcntxt = cpu_to_le32(0x00000000);
+ msg->body[0] = cpu_to_le32(0x00000000);
+ msg->body[1] = cpu_to_le32(0x00000000);
+ msg->body[2] = cpu_to_le32(i2o_dma_low(c->status.phys));
+ msg->body[3] = cpu_to_le32(i2o_dma_high(c->status.phys));
- i2o_msg_post(c, m);
+ i2o_msg_post(c, msg);
/* Wait for a reply */
timeout = jiffies + I2O_TIMEOUT_RESET * HZ;
osm_debug("%s: Reset in progress, waiting for reboot...\n",
c->name);
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET);
- while (m == I2O_QUEUE_EMPTY) {
+ while (IS_ERR(msg = i2o_msg_get_wait(c, I2O_TIMEOUT_RESET))) {
if (time_after(jiffies, timeout)) {
osm_err("%s: IOP reset timeout.\n", c->name);
- rc = -ETIMEDOUT;
+ rc = PTR_ERR(msg);
goto exit;
}
schedule_timeout_uninterruptible(1);
-
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_RESET);
}
- i2o_msg_nop(c, m);
+ i2o_msg_nop(c, msg);
/* from here all quiesce commands are safe */
c->no_quiesce = 0;
*/
static int i2o_iop_systab_set(struct i2o_controller *c)
{
- struct i2o_message __iomem *msg;
- u32 m;
+ struct i2o_message *msg;
i2o_status_block *sb = c->status_block.virt;
struct device *dev = &c->pdev->dev;
struct resource *root;
}
}
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -ETIMEDOUT;
+ msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
i2o_systab.phys = dma_map_single(dev, i2o_systab.virt, i2o_systab.len,
PCI_DMA_TODEVICE);
if (!i2o_systab.phys) {
- i2o_msg_nop(c, m);
+ i2o_msg_nop(c, msg);
return -ENOMEM;
}
- writel(I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6, &msg->u.head[0]);
- writel(I2O_CMD_SYS_TAB_SET << 24 | HOST_TID << 12 | ADAPTER_TID,
- &msg->u.head[1]);
+ msg->u.head[0] = cpu_to_le32(I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6);
+ msg->u.head[1] =
+ cpu_to_le32(I2O_CMD_SYS_TAB_SET << 24 | HOST_TID << 12 |
+ ADAPTER_TID);
/*
* Provide three SGL-elements:
* same table to everyone. We have to go remap it for them all
*/
- writel(c->unit + 2, &msg->body[0]);
- writel(0, &msg->body[1]);
- writel(0x54000000 | i2o_systab.len, &msg->body[2]);
- writel(i2o_systab.phys, &msg->body[3]);
- writel(0x54000000 | sb->current_mem_size, &msg->body[4]);
- writel(sb->current_mem_base, &msg->body[5]);
- writel(0xd4000000 | sb->current_io_size, &msg->body[6]);
- writel(sb->current_io_base, &msg->body[6]);
+ msg->body[0] = cpu_to_le32(c->unit + 2);
+ msg->body[1] = cpu_to_le32(0x00000000);
+ msg->body[2] = cpu_to_le32(0x54000000 | i2o_systab.len);
+ msg->body[3] = cpu_to_le32(i2o_systab.phys);
+ msg->body[4] = cpu_to_le32(0x54000000 | sb->current_mem_size);
+ msg->body[5] = cpu_to_le32(sb->current_mem_base);
+ msg->body[6] = cpu_to_le32(0xd4000000 | sb->current_io_size);
+ msg->body[6] = cpu_to_le32(sb->current_io_base);
- rc = i2o_msg_post_wait(c, m, 120);
+ rc = i2o_msg_post_wait(c, msg, 120);
dma_unmap_single(dev, i2o_systab.phys, i2o_systab.len,
PCI_DMA_TODEVICE);
*/
int i2o_status_get(struct i2o_controller *c)
{
- struct i2o_message __iomem *msg;
- u32 m;
+ struct i2o_message *msg;
volatile u8 *status_block;
unsigned long timeout;
status_block = (u8 *) c->status_block.virt;
memset(c->status_block.virt, 0, sizeof(i2o_status_block));
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -ETIMEDOUT;
+ msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
- writel(NINE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
- writel(I2O_CMD_STATUS_GET << 24 | HOST_TID << 12 | ADAPTER_TID,
- &msg->u.head[1]);
- writel(i2o_exec_driver.context, &msg->u.s.icntxt);
- writel(0, &msg->u.s.tcntxt); // FIXME: use resonable transaction context
- writel(0, &msg->body[0]);
- writel(0, &msg->body[1]);
- writel(i2o_dma_low(c->status_block.phys), &msg->body[2]);
- writel(i2o_dma_high(c->status_block.phys), &msg->body[3]);
- writel(sizeof(i2o_status_block), &msg->body[4]); /* always 88 bytes */
+ msg->u.head[0] = cpu_to_le32(NINE_WORD_MSG_SIZE | SGL_OFFSET_0);
+ msg->u.head[1] =
+ cpu_to_le32(I2O_CMD_STATUS_GET << 24 | HOST_TID << 12 |
+ ADAPTER_TID);
+ msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context);
+ msg->u.s.tcntxt = cpu_to_le32(0x00000000);
+ msg->body[0] = cpu_to_le32(0x00000000);
+ msg->body[1] = cpu_to_le32(0x00000000);
+ msg->body[2] = cpu_to_le32(i2o_dma_low(c->status_block.phys));
+ msg->body[3] = cpu_to_le32(i2o_dma_high(c->status_block.phys));
+ msg->body[4] = cpu_to_le32(sizeof(i2o_status_block)); /* always 88 bytes */
- i2o_msg_post(c, m);
+ i2o_msg_post(c, msg);
/* Wait for a reply */
timeout = jiffies + I2O_TIMEOUT_STATUS_GET * HZ;
struct device *dev = &c->pdev->dev;
for (i = 0; i < I2O_HRT_GET_TRIES; i++) {
- struct i2o_message __iomem *msg;
- u32 m;
+ struct i2o_message *msg;
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -ETIMEDOUT;
+ msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
- writel(SIX_WORD_MSG_SIZE | SGL_OFFSET_4, &msg->u.head[0]);
- writel(I2O_CMD_HRT_GET << 24 | HOST_TID << 12 | ADAPTER_TID,
- &msg->u.head[1]);
- writel(0xd0000000 | c->hrt.len, &msg->body[0]);
- writel(c->hrt.phys, &msg->body[1]);
+ msg->u.head[0] = cpu_to_le32(SIX_WORD_MSG_SIZE | SGL_OFFSET_4);
+ msg->u.head[1] =
+ cpu_to_le32(I2O_CMD_HRT_GET << 24 | HOST_TID << 12 |
+ ADAPTER_TID);
+ msg->body[0] = cpu_to_le32(0xd0000000 | c->hrt.len);
+ msg->body[1] = cpu_to_le32(c->hrt.phys);
- rc = i2o_msg_post_wait_mem(c, m, 20, &c->hrt);
+ rc = i2o_msg_post_wait_mem(c, msg, 20, &c->hrt);
if (rc < 0) {
osm_err("%s: Unable to get HRT (status=%#x)\n", c->name,
*/
void i2o_iop_free(struct i2o_controller *c)
{
+ i2o_pool_free(&c->in_msg);
kfree(c);
};
* i2o_iop_alloc - Allocate and initialize a i2o_controller struct
*
* Allocate the necessary memory for a i2o_controller struct and
- * initialize the lists.
+ * initialize the lists and message mempool.
*
* Returns a pointer to the I2O controller or a negative error code on
* failure.
{
static int unit = 0; /* 0 and 1 are NULL IOP and Local Host */
struct i2o_controller *c;
+ char poolname[32];
c = kmalloc(sizeof(*c), GFP_KERNEL);
if (!c) {
}
memset(c, 0, sizeof(*c));
+ c->unit = unit++;
+ sprintf(c->name, "iop%d", c->unit);
+
+ snprintf(poolname, sizeof(poolname), "i2o_%s_msg_inpool", c->name);
+ if (i2o_pool_alloc
+ (&c->in_msg, poolname, I2O_INBOUND_MSG_FRAME_SIZE * 4,
+ I2O_MSG_INPOOL_MIN)) {
+ kfree(c);
+ return ERR_PTR(-ENOMEM);
+ };
+
INIT_LIST_HEAD(&c->devices);
spin_lock_init(&c->lock);
init_MUTEX(&c->lct_lock);
- c->unit = unit++;
- sprintf(c->name, "iop%d", c->unit);
device_initialize(&c->device);
* is waited for, or expected. If you do not want further notifications,
* call the i2o_event_register again with a evt_mask of 0.
*
- * Returns 0 on success or -ETIMEDOUT if no message could be fetched for
- * sending the request.
+ * Returns 0 on success or negative error code on failure.
*/
int i2o_event_register(struct i2o_device *dev, struct i2o_driver *drv,
int tcntxt, u32 evt_mask)
{
struct i2o_controller *c = dev->iop;
- struct i2o_message __iomem *msg;
- u32 m;
+ struct i2o_message *msg;
- m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET);
- if (m == I2O_QUEUE_EMPTY)
- return -ETIMEDOUT;
+ msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET);
+ if (IS_ERR(msg))
+ return PTR_ERR(msg);
- writel(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0, &msg->u.head[0]);
- writel(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | dev->lct_data.
- tid, &msg->u.head[1]);
- writel(drv->context, &msg->u.s.icntxt);
- writel(tcntxt, &msg->u.s.tcntxt);
- writel(evt_mask, &msg->body[0]);
+ msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0);
+ msg->u.head[1] =
+ cpu_to_le32(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | dev->
+ lct_data.tid);
+ msg->u.s.icntxt = cpu_to_le32(drv->context);
+ msg->u.s.tcntxt = cpu_to_le32(tcntxt);
+ msg->body[0] = cpu_to_le32(evt_mask);
- i2o_msg_post(c, m);
+ i2o_msg_post(c, msg);
return 0;
};
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/workqueue.h> /* work_struct */
+#include <linux/mempool.h>
#include <asm/io.h>
#include <asm/semaphore.h> /* Needed for MUTEX init macros */
#define I2O_QUEUE_EMPTY 0xffffffff
/*
- * Message structures
+ * Cache strategies
*/
-struct i2o_message {
- union {
- struct {
- u8 version_offset;
- u8 flags;
- u16 size;
- u32 target_tid:12;
- u32 init_tid:12;
- u32 function:8;
- u32 icntxt; /* initiator context */
- u32 tcntxt; /* transaction context */
- } s;
- u32 head[4];
- } u;
- /* List follows */
- u32 body[0];
-};
-/*
- * Each I2O device entity has one of these. There is one per device.
+/* The NULL strategy leaves everything up to the controller. This tends to be a
+ * pessimal but functional choice.
*/
-struct i2o_device {
- i2o_lct_entry lct_data; /* Device LCT information */
-
- struct i2o_controller *iop; /* Controlling IOP */
- struct list_head list; /* node in IOP devices list */
-
- struct device device;
-
- struct semaphore lock; /* device lock */
-};
+#define CACHE_NULL 0
+/* Prefetch data when reading. We continually attempt to load the next 32 sectors
+ * into the controller cache.
+ */
+#define CACHE_PREFETCH 1
+/* Prefetch data when reading. We sometimes attempt to load the next 32 sectors
+ * into the controller cache. When an I/O is less <= 8K we assume its probably
+ * not sequential and don't prefetch (default)
+ */
+#define CACHE_SMARTFETCH 2
+/* Data is written to the cache and then out on to the disk. The I/O must be
+ * physically on the medium before the write is acknowledged (default without
+ * NVRAM)
+ */
+#define CACHE_WRITETHROUGH 17
+/* Data is written to the cache and then out on to the disk. The controller
+ * is permitted to write back the cache any way it wants. (default if battery
+ * backed NVRAM is present). It can be useful to set this for swap regardless of
+ * battery state.
+ */
+#define CACHE_WRITEBACK 18
+/* Optimise for under powered controllers, especially on RAID1 and RAID0. We
+ * write large I/O's directly to disk bypassing the cache to avoid the extra
+ * memory copy hits. Small writes are writeback cached
+ */
+#define CACHE_SMARTBACK 19
+/* Optimise for under powered controllers, especially on RAID1 and RAID0. We
+ * write large I/O's directly to disk bypassing the cache to avoid the extra
+ * memory copy hits. Small writes are writethrough cached. Suitable for devices
+ * lacking battery backup
+ */
+#define CACHE_SMARTTHROUGH 20
/*
- * Event structure provided to the event handling function
+ * Ioctl structures
*/
-struct i2o_event {
- struct work_struct work;
- struct i2o_device *i2o_dev; /* I2O device pointer from which the
- event reply was initiated */
- u16 size; /* Size of data in 32-bit words */
- u32 tcntxt; /* Transaction context used at
- registration */
- u32 event_indicator; /* Event indicator from reply */
- u32 data[0]; /* Event data from reply */
-};
+
+#define BLKI2OGRSTRAT _IOR('2', 1, int)
+#define BLKI2OGWSTRAT _IOR('2', 2, int)
+#define BLKI2OSRSTRAT _IOW('2', 3, int)
+#define BLKI2OSWSTRAT _IOW('2', 4, int)
/*
- * I2O classes which could be handled by the OSM
+ * I2O Function codes
*/
-struct i2o_class_id {
- u16 class_id:12;
-};
/*
- * I2O driver structure for OSMs
+ * Executive Class
*/
-struct i2o_driver {
- char *name; /* OSM name */
- int context; /* Low 8 bits of the transaction info */
- struct i2o_class_id *classes; /* I2O classes that this OSM handles */
-
- /* Message reply handler */
- int (*reply) (struct i2o_controller *, u32, struct i2o_message *);
-
- /* Event handler */
- void (*event) (struct i2o_event *);
-
- struct workqueue_struct *event_queue; /* Event queue */
-
- struct device_driver driver;
-
- /* notification of changes */
- void (*notify_controller_add) (struct i2o_controller *);
- void (*notify_controller_remove) (struct i2o_controller *);
- void (*notify_device_add) (struct i2o_device *);
- void (*notify_device_remove) (struct i2o_device *);
-
- struct semaphore lock;
-};
+#define I2O_CMD_ADAPTER_ASSIGN 0xB3
+#define I2O_CMD_ADAPTER_READ 0xB2
+#define I2O_CMD_ADAPTER_RELEASE 0xB5
+#define I2O_CMD_BIOS_INFO_SET 0xA5
+#define I2O_CMD_BOOT_DEVICE_SET 0xA7
+#define I2O_CMD_CONFIG_VALIDATE 0xBB
+#define I2O_CMD_CONN_SETUP 0xCA
+#define I2O_CMD_DDM_DESTROY 0xB1
+#define I2O_CMD_DDM_ENABLE 0xD5
+#define I2O_CMD_DDM_QUIESCE 0xC7
+#define I2O_CMD_DDM_RESET 0xD9
+#define I2O_CMD_DDM_SUSPEND 0xAF
+#define I2O_CMD_DEVICE_ASSIGN 0xB7
+#define I2O_CMD_DEVICE_RELEASE 0xB9
+#define I2O_CMD_HRT_GET 0xA8
+#define I2O_CMD_ADAPTER_CLEAR 0xBE
+#define I2O_CMD_ADAPTER_CONNECT 0xC9
+#define I2O_CMD_ADAPTER_RESET 0xBD
+#define I2O_CMD_LCT_NOTIFY 0xA2
+#define I2O_CMD_OUTBOUND_INIT 0xA1
+#define I2O_CMD_PATH_ENABLE 0xD3
+#define I2O_CMD_PATH_QUIESCE 0xC5
+#define I2O_CMD_PATH_RESET 0xD7
+#define I2O_CMD_STATIC_MF_CREATE 0xDD
+#define I2O_CMD_STATIC_MF_RELEASE 0xDF
+#define I2O_CMD_STATUS_GET 0xA0
+#define I2O_CMD_SW_DOWNLOAD 0xA9
+#define I2O_CMD_SW_UPLOAD 0xAB
+#define I2O_CMD_SW_REMOVE 0xAD
+#define I2O_CMD_SYS_ENABLE 0xD1
+#define I2O_CMD_SYS_MODIFY 0xC1
+#define I2O_CMD_SYS_QUIESCE 0xC3
+#define I2O_CMD_SYS_TAB_SET 0xA3
/*
- * Contains DMA mapped address information
+ * Utility Class
*/
-struct i2o_dma {
- void *virt;
- dma_addr_t phys;
- size_t len;
-};
+#define I2O_CMD_UTIL_NOP 0x00
+#define I2O_CMD_UTIL_ABORT 0x01
+#define I2O_CMD_UTIL_CLAIM 0x09
+#define I2O_CMD_UTIL_RELEASE 0x0B
+#define I2O_CMD_UTIL_PARAMS_GET 0x06
+#define I2O_CMD_UTIL_PARAMS_SET 0x05
+#define I2O_CMD_UTIL_EVT_REGISTER 0x13
+#define I2O_CMD_UTIL_EVT_ACK 0x14
+#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10
+#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D
+#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F
+#define I2O_CMD_UTIL_LOCK 0x17
+#define I2O_CMD_UTIL_LOCK_RELEASE 0x19
+#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15
/*
- * Contains IO mapped address information
+ * SCSI Host Bus Adapter Class
*/
-struct i2o_io {
- void __iomem *virt;
- unsigned long phys;
- unsigned long len;
-};
+#define I2O_CMD_SCSI_EXEC 0x81
+#define I2O_CMD_SCSI_ABORT 0x83
+#define I2O_CMD_SCSI_BUSRESET 0x27
/*
- * Context queue entry, used for 32-bit context on 64-bit systems
+ * Bus Adapter Class
*/
-struct i2o_context_list_element {
- struct list_head list;
- u32 context;
- void *ptr;
- unsigned long timestamp;
-};
+#define I2O_CMD_BUS_ADAPTER_RESET 0x85
+#define I2O_CMD_BUS_RESET 0x87
+#define I2O_CMD_BUS_SCAN 0x89
+#define I2O_CMD_BUS_QUIESCE 0x8b
/*
- * Each I2O controller has one of these objects
+ * Random Block Storage Class
*/
-struct i2o_controller {
- char name[16];
- int unit;
- int type;
+#define I2O_CMD_BLOCK_READ 0x30
+#define I2O_CMD_BLOCK_WRITE 0x31
+#define I2O_CMD_BLOCK_CFLUSH 0x37
+#define I2O_CMD_BLOCK_MLOCK 0x49
+#define I2O_CMD_BLOCK_MUNLOCK 0x4B
+#define I2O_CMD_BLOCK_MMOUNT 0x41
+#define I2O_CMD_BLOCK_MEJECT 0x43
+#define I2O_CMD_BLOCK_POWER 0x70
- struct pci_dev *pdev; /* PCI device */
+#define I2O_CMD_PRIVATE 0xFF
- unsigned int promise:1; /* Promise controller */
- unsigned int adaptec:1; /* DPT / Adaptec controller */
- unsigned int raptor:1; /* split bar */
- unsigned int no_quiesce:1; /* dont quiesce before reset */
- unsigned int short_req:1; /* use small block sizes */
- unsigned int limit_sectors:1; /* limit number of sectors / request */
- unsigned int pae_support:1; /* controller has 64-bit SGL support */
+/* Command status values */
- struct list_head devices; /* list of I2O devices */
- struct list_head list; /* Controller list */
+#define I2O_CMD_IN_PROGRESS 0x01
+#define I2O_CMD_REJECTED 0x02
+#define I2O_CMD_FAILED 0x03
+#define I2O_CMD_COMPLETED 0x04
- void __iomem *in_port; /* Inbout port address */
- void __iomem *out_port; /* Outbound port address */
- void __iomem *irq_status; /* Interrupt status register address */
- void __iomem *irq_mask; /* Interrupt mask register address */
+/* I2O API function return values */
- /* Dynamic LCT related data */
+#define I2O_RTN_NO_ERROR 0
+#define I2O_RTN_NOT_INIT 1
+#define I2O_RTN_FREE_Q_EMPTY 2
+#define I2O_RTN_TCB_ERROR 3
+#define I2O_RTN_TRANSACTION_ERROR 4
+#define I2O_RTN_ADAPTER_ALREADY_INIT 5
+#define I2O_RTN_MALLOC_ERROR 6
+#define I2O_RTN_ADPTR_NOT_REGISTERED 7
+#define I2O_RTN_MSG_REPLY_TIMEOUT 8
+#define I2O_RTN_NO_STATUS 9
+#define I2O_RTN_NO_FIRM_VER 10
+#define I2O_RTN_NO_LINK_SPEED 11
- struct i2o_dma status; /* IOP status block */
+/* Reply message status defines for all messages */
- struct i2o_dma hrt; /* HW Resource Table */
- i2o_lct *lct; /* Logical Config Table */
- struct i2o_dma dlct; /* Temp LCT */
- struct semaphore lct_lock; /* Lock for LCT updates */
- struct i2o_dma status_block; /* IOP status block */
+#define I2O_REPLY_STATUS_SUCCESS 0x00
+#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01
+#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02
+#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03
+#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04
+#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05
+#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06
+#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08
+#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09
+#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A
+#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B
+#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80
- struct i2o_io base; /* controller messaging unit */
- struct i2o_io in_queue; /* inbound message queue Host->IOP */
- struct i2o_dma out_queue; /* outbound message queue IOP->Host */
+/* Status codes and Error Information for Parameter functions */
- unsigned int battery:1; /* Has a battery backup */
- unsigned int io_alloc:1; /* An I/O resource was allocated */
- unsigned int mem_alloc:1; /* A memory resource was allocated */
+#define I2O_PARAMS_STATUS_SUCCESS 0x00
+#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01
+#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02
+#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03
+#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04
+#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05
+#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06
+#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07
+#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08
+#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09
+#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A
+#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B
+#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C
+#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D
+#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E
+#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F
+#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10
- struct resource io_resource; /* I/O resource allocated to the IOP */
- struct resource mem_resource; /* Mem resource allocated to the IOP */
+/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
+ * messages: Table 3-2 Detailed Status Codes.*/
- struct device device;
- struct class_device *classdev; /* I2O controller class device */
- struct i2o_device *exec; /* Executive */
-#if BITS_PER_LONG == 64
- spinlock_t context_list_lock; /* lock for context_list */
- atomic_t context_list_counter; /* needed for unique contexts */
- struct list_head context_list; /* list of context id's
- and pointers */
-#endif
- spinlock_t lock; /* lock for controller
- configuration */
+#define I2O_DSC_SUCCESS 0x0000
+#define I2O_DSC_BAD_KEY 0x0002
+#define I2O_DSC_TCL_ERROR 0x0003
+#define I2O_DSC_REPLY_BUFFER_FULL 0x0004
+#define I2O_DSC_NO_SUCH_PAGE 0x0005
+#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006
+#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007
+#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009
+#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A
+#define I2O_DSC_DEVICE_LOCKED 0x000B
+#define I2O_DSC_DEVICE_RESET 0x000C
+#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D
+#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E
+#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F
+#define I2O_DSC_INVALID_OFFSET 0x0010
+#define I2O_DSC_INVALID_PARAMETER 0x0011
+#define I2O_DSC_INVALID_REQUEST 0x0012
+#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013
+#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014
+#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015
+#define I2O_DSC_MISSING_PARAMETER 0x0016
+#define I2O_DSC_TIMEOUT 0x0017
+#define I2O_DSC_UNKNOWN_ERROR 0x0018
+#define I2O_DSC_UNKNOWN_FUNCTION 0x0019
+#define I2O_DSC_UNSUPPORTED_VERSION 0x001A
+#define I2O_DSC_DEVICE_BUSY 0x001B
+#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C
- void *driver_data[I2O_MAX_DRIVERS]; /* storage for drivers */
-};
+/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
+ Status Codes.*/
-/*
- * I2O System table entry
- *
- * The system table contains information about all the IOPs in the
- * system. It is sent to all IOPs so that they can create peer2peer
- * connections between them.
- */
-struct i2o_sys_tbl_entry {
- u16 org_id;
- u16 reserved1;
- u32 iop_id:12;
- u32 reserved2:20;
- u16 seg_num:12;
- u16 i2o_version:4;
- u8 iop_state;
- u8 msg_type;
- u16 frame_size;
- u16 reserved3;
- u32 last_changed;
- u32 iop_capabilities;
- u32 inbound_low;
- u32 inbound_high;
-};
+#define I2O_BSA_DSC_SUCCESS 0x0000
+#define I2O_BSA_DSC_MEDIA_ERROR 0x0001
+#define I2O_BSA_DSC_ACCESS_ERROR 0x0002
+#define I2O_BSA_DSC_DEVICE_FAILURE 0x0003
+#define I2O_BSA_DSC_DEVICE_NOT_READY 0x0004
+#define I2O_BSA_DSC_MEDIA_NOT_PRESENT 0x0005
+#define I2O_BSA_DSC_MEDIA_LOCKED 0x0006
+#define I2O_BSA_DSC_MEDIA_FAILURE 0x0007
+#define I2O_BSA_DSC_PROTOCOL_FAILURE 0x0008
+#define I2O_BSA_DSC_BUS_FAILURE 0x0009
+#define I2O_BSA_DSC_ACCESS_VIOLATION 0x000A
+#define I2O_BSA_DSC_WRITE_PROTECTED 0x000B
+#define I2O_BSA_DSC_DEVICE_RESET 0x000C
+#define I2O_BSA_DSC_VOLUME_CHANGED 0x000D
+#define I2O_BSA_DSC_TIMEOUT 0x000E
-struct i2o_sys_tbl {
- u8 num_entries;
- u8 version;
- u16 reserved1;
- u32 change_ind;
- u32 reserved2;
- u32 reserved3;
- struct i2o_sys_tbl_entry iops[0];
-};
+/* FailureStatusCodes, Table 3-3 Message Failure Codes */
-extern struct list_head i2o_controllers;
+#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED 0x81
+#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED 0x82
+#define I2O_FSC_TRANSPORT_CONGESTION 0x83
+#define I2O_FSC_TRANSPORT_FAILURE 0x84
+#define I2O_FSC_TRANSPORT_STATE_ERROR 0x85
+#define I2O_FSC_TRANSPORT_TIME_OUT 0x86
+#define I2O_FSC_TRANSPORT_ROUTING_FAILURE 0x87
+#define I2O_FSC_TRANSPORT_INVALID_VERSION 0x88
+#define I2O_FSC_TRANSPORT_INVALID_OFFSET 0x89
+#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS 0x8A
+#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL 0x8B
+#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE 0x8C
+#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID 0x8D
+#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID 0x8E
+#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F
+#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE 0xFF
-/* Message functions */
-static inline u32 i2o_msg_get(struct i2o_controller *,
- struct i2o_message __iomem **);
-extern u32 i2o_msg_get_wait(struct i2o_controller *,
- struct i2o_message __iomem **, int);
-static inline void i2o_msg_post(struct i2o_controller *, u32);
-static inline int i2o_msg_post_wait(struct i2o_controller *, u32,
- unsigned long);
-extern int i2o_msg_post_wait_mem(struct i2o_controller *, u32, unsigned long,
- struct i2o_dma *);
-extern void i2o_msg_nop(struct i2o_controller *, u32);
-static inline void i2o_flush_reply(struct i2o_controller *, u32);
+/* Device Claim Types */
+#define I2O_CLAIM_PRIMARY 0x01000000
+#define I2O_CLAIM_MANAGEMENT 0x02000000
+#define I2O_CLAIM_AUTHORIZED 0x03000000
+#define I2O_CLAIM_SECONDARY 0x04000000
-/* IOP functions */
-extern int i2o_status_get(struct i2o_controller *);
+/* Message header defines for VersionOffset */
+#define I2OVER15 0x0001
+#define I2OVER20 0x0002
-extern int i2o_event_register(struct i2o_device *, struct i2o_driver *, int,
- u32);
-extern struct i2o_device *i2o_iop_find_device(struct i2o_controller *, u16);
-extern struct i2o_controller *i2o_find_iop(int);
+/* Default is 1.5 */
+#define I2OVERSION I2OVER15
-/* Functions needed for handling 64-bit pointers in 32-bit context */
-#if BITS_PER_LONG == 64
-extern u32 i2o_cntxt_list_add(struct i2o_controller *, void *);
-extern void *i2o_cntxt_list_get(struct i2o_controller *, u32);
-extern u32 i2o_cntxt_list_remove(struct i2o_controller *, void *);
-extern u32 i2o_cntxt_list_get_ptr(struct i2o_controller *, void *);
+#define SGL_OFFSET_0 I2OVERSION
+#define SGL_OFFSET_4 (0x0040 | I2OVERSION)
+#define SGL_OFFSET_5 (0x0050 | I2OVERSION)
+#define SGL_OFFSET_6 (0x0060 | I2OVERSION)
+#define SGL_OFFSET_7 (0x0070 | I2OVERSION)
+#define SGL_OFFSET_8 (0x0080 | I2OVERSION)
+#define SGL_OFFSET_9 (0x0090 | I2OVERSION)
+#define SGL_OFFSET_10 (0x00A0 | I2OVERSION)
+#define SGL_OFFSET_11 (0x00B0 | I2OVERSION)
+#define SGL_OFFSET_12 (0x00C0 | I2OVERSION)
+#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION)
-static inline u32 i2o_ptr_low(void *ptr)
-{
- return (u32) (u64) ptr;
-};
+/* Transaction Reply Lists (TRL) Control Word structure */
+#define TRL_SINGLE_FIXED_LENGTH 0x00
+#define TRL_SINGLE_VARIABLE_LENGTH 0x40
+#define TRL_MULTIPLE_FIXED_LENGTH 0x80
-static inline u32 i2o_ptr_high(void *ptr)
-{
- return (u32) ((u64) ptr >> 32);
-};
+ /* msg header defines for MsgFlags */
+#define MSG_STATIC 0x0100
+#define MSG_64BIT_CNTXT 0x0200
+#define MSG_MULTI_TRANS 0x1000
+#define MSG_FAIL 0x2000
+#define MSG_FINAL 0x4000
+#define MSG_REPLY 0x8000
-static inline u32 i2o_dma_low(dma_addr_t dma_addr)
-{
- return (u32) (u64) dma_addr;
-};
+ /* minimum size msg */
+#define THREE_WORD_MSG_SIZE 0x00030000
+#define FOUR_WORD_MSG_SIZE 0x00040000
+#define FIVE_WORD_MSG_SIZE 0x00050000
+#define SIX_WORD_MSG_SIZE 0x00060000
+#define SEVEN_WORD_MSG_SIZE 0x00070000
+#define EIGHT_WORD_MSG_SIZE 0x00080000
+#define NINE_WORD_MSG_SIZE 0x00090000
+#define TEN_WORD_MSG_SIZE 0x000A0000
+#define ELEVEN_WORD_MSG_SIZE 0x000B0000
+#define I2O_MESSAGE_SIZE(x) ((x)<<16)
-static inline u32 i2o_dma_high(dma_addr_t dma_addr)
-{
- return (u32) ((u64) dma_addr >> 32);
-};
-#else
-static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr)
-{
- return (u32) ptr;
-};
+/* special TID assignments */
+#define ADAPTER_TID 0
+#define HOST_TID 1
-static inline void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
-{
- return (void *)context;
-};
+/* outbound queue defines */
+#define I2O_MAX_OUTBOUND_MSG_FRAMES 128
+#define I2O_OUTBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */
-static inline u32 i2o_cntxt_list_remove(struct i2o_controller *c, void *ptr)
-{
- return (u32) ptr;
-};
+/* inbound queue definitions */
+#define I2O_MSG_INPOOL_MIN 32
+#define I2O_INBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */
-static inline u32 i2o_cntxt_list_get_ptr(struct i2o_controller *c, void *ptr)
-{
- return (u32) ptr;
-};
+#define I2O_POST_WAIT_OK 0
+#define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT
-static inline u32 i2o_ptr_low(void *ptr)
-{
- return (u32) ptr;
-};
+#define I2O_CONTEXT_LIST_MIN_LENGTH 15
+#define I2O_CONTEXT_LIST_USED 0x01
+#define I2O_CONTEXT_LIST_DELETED 0x02
-static inline u32 i2o_ptr_high(void *ptr)
-{
- return 0;
-};
+/* timeouts */
+#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE 15
+#define I2O_TIMEOUT_MESSAGE_GET 5
+#define I2O_TIMEOUT_RESET 30
+#define I2O_TIMEOUT_STATUS_GET 5
+#define I2O_TIMEOUT_LCT_GET 360
+#define I2O_TIMEOUT_SCSI_SCB_ABORT 240
-static inline u32 i2o_dma_low(dma_addr_t dma_addr)
-{
- return (u32) dma_addr;
-};
+/* retries */
+#define I2O_HRT_GET_TRIES 3
+#define I2O_LCT_GET_TRIES 3
-static inline u32 i2o_dma_high(dma_addr_t dma_addr)
-{
- return 0;
-};
-#endif
+/* defines for max_sectors and max_phys_segments */
+#define I2O_MAX_SECTORS 1024
+#define I2O_MAX_SECTORS_LIMITED 256
+#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS
-/**
- * i2o_sg_tablesize - Calculate the maximum number of elements in a SGL
- * @c: I2O controller for which the calculation should be done
- * @body_size: maximum body size used for message in 32-bit words.
- *
- * Return the maximum number of SG elements in a SG list.
+/*
+ * Message structures
*/
-static inline u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size)
-{
- i2o_status_block *sb = c->status_block.virt;
- u16 sg_count =
- (sb->inbound_frame_size - sizeof(struct i2o_message) / 4) -
- body_size;
-
- if (c->pae_support) {
- /*
- * for 64-bit a SG attribute element must be added and each
- * SG element needs 12 bytes instead of 8.
- */
- sg_count -= 2;
- sg_count /= 3;
- } else
- sg_count /= 2;
-
- if (c->short_req && (sg_count > 8))
- sg_count = 8;
+struct i2o_message {
+ union {
+ struct {
+ u8 version_offset;
+ u8 flags;
+ u16 size;
+ u32 target_tid:12;
+ u32 init_tid:12;
+ u32 function:8;
+ u32 icntxt; /* initiator context */
+ u32 tcntxt; /* transaction context */
+ } s;
+ u32 head[4];
+ } u;
+ /* List follows */
+ u32 body[0];
+};
- return sg_count;
+/* MFA and I2O message used by mempool */
+struct i2o_msg_mfa {
+ u32 mfa; /* MFA returned by the controller */
+ struct i2o_message msg; /* I2O message */
};
-/**
- * i2o_dma_map_single - Map pointer to controller and fill in I2O message.
- * @c: I2O controller
- * @ptr: pointer to the data which should be mapped
- * @size: size of data in bytes
- * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE
- * @sg_ptr: pointer to the SG list inside the I2O message
- *
- * This function does all necessary DMA handling and also writes the I2O
- * SGL elements into the I2O message. For details on DMA handling see also
- * dma_map_single(). The pointer sg_ptr will only be set to the end of the
- * SG list if the allocation was successful.
- *
- * Returns DMA address which must be checked for failures using
- * dma_mapping_error().
+/*
+ * Each I2O device entity has one of these. There is one per device.
*/
-static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
- size_t size,
- enum dma_data_direction direction,
- u32 __iomem ** sg_ptr)
-{
- u32 sg_flags;
- u32 __iomem *mptr = *sg_ptr;
- dma_addr_t dma_addr;
+struct i2o_device {
+ i2o_lct_entry lct_data; /* Device LCT information */
- switch (direction) {
- case DMA_TO_DEVICE:
- sg_flags = 0xd4000000;
- break;
- case DMA_FROM_DEVICE:
- sg_flags = 0xd0000000;
- break;
- default:
- return 0;
- }
+ struct i2o_controller *iop; /* Controlling IOP */
+ struct list_head list; /* node in IOP devices list */
- dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction);
- if (!dma_mapping_error(dma_addr)) {
-#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
- if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
- writel(0x7C020002, mptr++);
- writel(PAGE_SIZE, mptr++);
- }
-#endif
+ struct device device;
- writel(sg_flags | size, mptr++);
- writel(i2o_dma_low(dma_addr), mptr++);
-#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
- if ((sizeof(dma_addr_t) > 4) && c->pae_support)
- writel(i2o_dma_high(dma_addr), mptr++);
-#endif
- *sg_ptr = mptr;
- }
- return dma_addr;
+ struct semaphore lock; /* device lock */
};
-/**
- * i2o_dma_map_sg - Map a SG List to controller and fill in I2O message.
- * @c: I2O controller
- * @sg: SG list to be mapped
- * @sg_count: number of elements in the SG list
- * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE
- * @sg_ptr: pointer to the SG list inside the I2O message
- *
- * This function does all necessary DMA handling and also writes the I2O
- * SGL elements into the I2O message. For details on DMA handling see also
- * dma_map_sg(). The pointer sg_ptr will only be set to the end of the SG
- * list if the allocation was successful.
- *
- * Returns 0 on failure or 1 on success.
+/*
+ * Event structure provided to the event handling function
*/
-static inline int i2o_dma_map_sg(struct i2o_controller *c,
- struct scatterlist *sg, int sg_count,
- enum dma_data_direction direction,
- u32 __iomem ** sg_ptr)
-{
- u32 sg_flags;
- u32 __iomem *mptr = *sg_ptr;
-
- switch (direction) {
- case DMA_TO_DEVICE:
- sg_flags = 0x14000000;
- break;
- case DMA_FROM_DEVICE:
- sg_flags = 0x10000000;
- break;
- default:
- return 0;
- }
-
- sg_count = dma_map_sg(&c->pdev->dev, sg, sg_count, direction);
- if (!sg_count)
- return 0;
-
-#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
- if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
- writel(0x7C020002, mptr++);
- writel(PAGE_SIZE, mptr++);
- }
-#endif
-
- while (sg_count-- > 0) {
- if (!sg_count)
- sg_flags |= 0xC0000000;
- writel(sg_flags | sg_dma_len(sg), mptr++);
- writel(i2o_dma_low(sg_dma_address(sg)), mptr++);
-#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
- if ((sizeof(dma_addr_t) > 4) && c->pae_support)
- writel(i2o_dma_high(sg_dma_address(sg)), mptr++);
-#endif
- sg++;
- }
- *sg_ptr = mptr;
+struct i2o_event {
+ struct work_struct work;
+ struct i2o_device *i2o_dev; /* I2O device pointer from which the
+ event reply was initiated */
+ u16 size; /* Size of data in 32-bit words */
+ u32 tcntxt; /* Transaction context used at
+ registration */
+ u32 event_indicator; /* Event indicator from reply */
+ u32 data[0]; /* Event data from reply */
+};
- return 1;
+/*
+ * I2O classes which could be handled by the OSM
+ */
+struct i2o_class_id {
+ u16 class_id:12;
};
-/**
- * i2o_dma_alloc - Allocate DMA memory
- * @dev: struct device pointer to the PCI device of the I2O controller
- * @addr: i2o_dma struct which should get the DMA buffer
- * @len: length of the new DMA memory
- * @gfp_mask: GFP mask
- *
- * Allocate a coherent DMA memory and write the pointers into addr.
- *
- * Returns 0 on success or -ENOMEM on failure.
+/*
+ * I2O driver structure for OSMs
*/
-static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
- size_t len, gfp_t gfp_mask)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- int dma_64 = 0;
+struct i2o_driver {
+ char *name; /* OSM name */
+ int context; /* Low 8 bits of the transaction info */
+ struct i2o_class_id *classes; /* I2O classes that this OSM handles */
- if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) {
- dma_64 = 1;
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK))
- return -ENOMEM;
- }
+ /* Message reply handler */
+ int (*reply) (struct i2o_controller *, u32, struct i2o_message *);
- addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask);
+ /* Event handler */
+ void (*event) (struct i2o_event *);
- if ((sizeof(dma_addr_t) > 4) && dma_64)
- if (pci_set_dma_mask(pdev, DMA_64BIT_MASK))
- printk(KERN_WARNING "i2o: unable to set 64-bit DMA");
+ struct workqueue_struct *event_queue; /* Event queue */
- if (!addr->virt)
- return -ENOMEM;
+ struct device_driver driver;
- memset(addr->virt, 0, len);
- addr->len = len;
+ /* notification of changes */
+ void (*notify_controller_add) (struct i2o_controller *);
+ void (*notify_controller_remove) (struct i2o_controller *);
+ void (*notify_device_add) (struct i2o_device *);
+ void (*notify_device_remove) (struct i2o_device *);
- return 0;
+ struct semaphore lock;
};
-/**
- * i2o_dma_free - Free DMA memory
- * @dev: struct device pointer to the PCI device of the I2O controller
- * @addr: i2o_dma struct which contains the DMA buffer
- *
- * Free a coherent DMA memory and set virtual address of addr to NULL.
+/*
+ * Contains DMA mapped address information
*/
-static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr)
-{
- if (addr->virt) {
- if (addr->phys)
- dma_free_coherent(dev, addr->len, addr->virt,
- addr->phys);
- else
- kfree(addr->virt);
- addr->virt = NULL;
- }
+struct i2o_dma {
+ void *virt;
+ dma_addr_t phys;
+ size_t len;
};
-/**
- * i2o_dma_realloc - Realloc DMA memory
- * @dev: struct device pointer to the PCI device of the I2O controller
- * @addr: pointer to a i2o_dma struct DMA buffer
- * @len: new length of memory
- * @gfp_mask: GFP mask
- *
- * If there was something allocated in the addr, free it first. If len > 0
- * than try to allocate it and write the addresses back to the addr
- * structure. If len == 0 set the virtual address to NULL.
- *
- * Returns the 0 on success or negative error code on failure.
+/*
+ * Contains slab cache and mempool information
*/
-static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr,
- size_t len, gfp_t gfp_mask)
-{
- i2o_dma_free(dev, addr);
-
- if (len)
- return i2o_dma_alloc(dev, addr, len, gfp_mask);
-
- return 0;
+struct i2o_pool {
+ char *name;
+ kmem_cache_t *slab;
+ mempool_t *mempool;
};
-/* I2O driver (OSM) functions */
-extern int i2o_driver_register(struct i2o_driver *);
-extern void i2o_driver_unregister(struct i2o_driver *);
-
-/**
- * i2o_driver_notify_controller_add - Send notification of added controller
- * to a single I2O driver
- *
- * Send notification of added controller to a single registered driver.
+/*
+ * Contains IO mapped address information
*/
-static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv,
- struct i2o_controller *c)
-{
- if (drv->notify_controller_add)
- drv->notify_controller_add(c);
+struct i2o_io {
+ void __iomem *virt;
+ unsigned long phys;
+ unsigned long len;
};
-/**
- * i2o_driver_notify_controller_remove - Send notification of removed
- * controller to a single I2O driver
- *
- * Send notification of removed controller to a single registered driver.
+/*
+ * Context queue entry, used for 32-bit context on 64-bit systems
*/
-static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv,
- struct i2o_controller *c)
-{
- if (drv->notify_controller_remove)
- drv->notify_controller_remove(c);
+struct i2o_context_list_element {
+ struct list_head list;
+ u32 context;
+ void *ptr;
+ unsigned long timestamp;
};
-/**
- * i2o_driver_notify_device_add - Send notification of added device to a
- * single I2O driver
- *
- * Send notification of added device to a single registered driver.
+/*
+ * Each I2O controller has one of these objects
*/
-static inline void i2o_driver_notify_device_add(struct i2o_driver *drv,
- struct i2o_device *i2o_dev)
-{
- if (drv->notify_device_add)
- drv->notify_device_add(i2o_dev);
+struct i2o_controller {
+ char name[16];
+ int unit;
+ int type;
+
+ struct pci_dev *pdev; /* PCI device */
+
+ unsigned int promise:1; /* Promise controller */
+ unsigned int adaptec:1; /* DPT / Adaptec controller */
+ unsigned int raptor:1; /* split bar */
+ unsigned int no_quiesce:1; /* dont quiesce before reset */
+ unsigned int short_req:1; /* use small block sizes */
+ unsigned int limit_sectors:1; /* limit number of sectors / request */
+ unsigned int pae_support:1; /* controller has 64-bit SGL support */
+
+ struct list_head devices; /* list of I2O devices */
+ struct list_head list; /* Controller list */
+
+ void __iomem *in_port; /* Inbout port address */
+ void __iomem *out_port; /* Outbound port address */
+ void __iomem *irq_status; /* Interrupt status register address */
+ void __iomem *irq_mask; /* Interrupt mask register address */
+
+ struct i2o_dma status; /* IOP status block */
+
+ struct i2o_dma hrt; /* HW Resource Table */
+ i2o_lct *lct; /* Logical Config Table */
+ struct i2o_dma dlct; /* Temp LCT */
+ struct semaphore lct_lock; /* Lock for LCT updates */
+ struct i2o_dma status_block; /* IOP status block */
+
+ struct i2o_io base; /* controller messaging unit */
+ struct i2o_io in_queue; /* inbound message queue Host->IOP */
+ struct i2o_dma out_queue; /* outbound message queue IOP->Host */
+
+ struct i2o_pool in_msg; /* mempool for inbound messages */
+
+ unsigned int battery:1; /* Has a battery backup */
+ unsigned int io_alloc:1; /* An I/O resource was allocated */
+ unsigned int mem_alloc:1; /* A memory resource was allocated */
+
+ struct resource io_resource; /* I/O resource allocated to the IOP */
+ struct resource mem_resource; /* Mem resource allocated to the IOP */
+
+ struct device device;
+ struct class_device *classdev; /* I2O controller class device */
+ struct i2o_device *exec; /* Executive */
+#if BITS_PER_LONG == 64
+ spinlock_t context_list_lock; /* lock for context_list */
+ atomic_t context_list_counter; /* needed for unique contexts */
+ struct list_head context_list; /* list of context id's
+ and pointers */
+#endif
+ spinlock_t lock; /* lock for controller
+ configuration */
+
+ void *driver_data[I2O_MAX_DRIVERS]; /* storage for drivers */
};
-/**
- * i2o_driver_notify_device_remove - Send notification of removed device
- * to a single I2O driver
+/*
+ * I2O System table entry
*
- * Send notification of removed device to a single registered driver.
+ * The system table contains information about all the IOPs in the
+ * system. It is sent to all IOPs so that they can create peer2peer
+ * connections between them.
*/
-static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv,
- struct i2o_device *i2o_dev)
-{
- if (drv->notify_device_remove)
- drv->notify_device_remove(i2o_dev);
+struct i2o_sys_tbl_entry {
+ u16 org_id;
+ u16 reserved1;
+ u32 iop_id:12;
+ u32 reserved2:20;
+ u16 seg_num:12;
+ u16 i2o_version:4;
+ u8 iop_state;
+ u8 msg_type;
+ u16 frame_size;
+ u16 reserved3;
+ u32 last_changed;
+ u32 iop_capabilities;
+ u32 inbound_low;
+ u32 inbound_high;
};
-extern void i2o_driver_notify_controller_add_all(struct i2o_controller *);
-extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *);
-extern void i2o_driver_notify_device_add_all(struct i2o_device *);
-extern void i2o_driver_notify_device_remove_all(struct i2o_device *);
+struct i2o_sys_tbl {
+ u8 num_entries;
+ u8 version;
+ u16 reserved1;
+ u32 change_ind;
+ u32 reserved2;
+ u32 reserved3;
+ struct i2o_sys_tbl_entry iops[0];
+};
-/* I2O device functions */
-extern int i2o_device_claim(struct i2o_device *);
-extern int i2o_device_claim_release(struct i2o_device *);
+extern struct list_head i2o_controllers;
-/* Exec OSM functions */
-extern int i2o_exec_lct_get(struct i2o_controller *);
+/* Message functions */
+static inline struct i2o_message *i2o_msg_get(struct i2o_controller *);
+extern struct i2o_message *i2o_msg_get_wait(struct i2o_controller *, int);
+static inline void i2o_msg_post(struct i2o_controller *, struct i2o_message *);
+static inline int i2o_msg_post_wait(struct i2o_controller *,
+ struct i2o_message *, unsigned long);
+extern int i2o_msg_post_wait_mem(struct i2o_controller *, struct i2o_message *,
+ unsigned long, struct i2o_dma *);
+static inline void i2o_flush_reply(struct i2o_controller *, u32);
-/* device / driver / kobject conversion functions */
-#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver)
-#define to_i2o_device(dev) container_of(dev, struct i2o_device, device)
-#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device)
-#define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj))
+/* IOP functions */
+extern int i2o_status_get(struct i2o_controller *);
-/**
- * i2o_msg_get - obtain an I2O message from the IOP
- * @c: I2O controller
- * @msg: pointer to a I2O message pointer
- *
- * This function tries to get a message slot. If no message slot is
- * available do not wait until one is availabe (see also i2o_msg_get_wait).
- *
- * On a success the message is returned and the pointer to the message is
- * set in msg. The returned message is the physical page frame offset
- * address from the read port (see the i2o spec). If no message is
- * available returns I2O_QUEUE_EMPTY and msg is leaved untouched.
- */
-static inline u32 i2o_msg_get(struct i2o_controller *c,
- struct i2o_message __iomem ** msg)
-{
- u32 m = readl(c->in_port);
+extern int i2o_event_register(struct i2o_device *, struct i2o_driver *, int,
+ u32);
+extern struct i2o_device *i2o_iop_find_device(struct i2o_controller *, u16);
+extern struct i2o_controller *i2o_find_iop(int);
- if (m != I2O_QUEUE_EMPTY)
- *msg = c->in_queue.virt + m;
+/* Functions needed for handling 64-bit pointers in 32-bit context */
+#if BITS_PER_LONG == 64
+extern u32 i2o_cntxt_list_add(struct i2o_controller *, void *);
+extern void *i2o_cntxt_list_get(struct i2o_controller *, u32);
+extern u32 i2o_cntxt_list_remove(struct i2o_controller *, void *);
+extern u32 i2o_cntxt_list_get_ptr(struct i2o_controller *, void *);
- return m;
+static inline u32 i2o_ptr_low(void *ptr)
+{
+ return (u32) (u64) ptr;
};
-/**
- * i2o_msg_post - Post I2O message to I2O controller
- * @c: I2O controller to which the message should be send
- * @m: the message identifier
- *
- * Post the message to the I2O controller.
- */
-static inline void i2o_msg_post(struct i2o_controller *c, u32 m)
+static inline u32 i2o_ptr_high(void *ptr)
{
- writel(m, c->in_port);
+ return (u32) ((u64) ptr >> 32);
};
-/**
- * i2o_msg_post_wait - Post and wait a message and wait until return
- * @c: controller
- * @m: message to post
- * @timeout: time in seconds to wait
- *
- * This API allows an OSM to post a message and then be told whether or
- * not the system received a successful reply. If the message times out
- * then the value '-ETIMEDOUT' is returned.
- *
- * Returns 0 on success or negative error code on failure.
- */
-static inline int i2o_msg_post_wait(struct i2o_controller *c, u32 m,
- unsigned long timeout)
+static inline u32 i2o_dma_low(dma_addr_t dma_addr)
{
- return i2o_msg_post_wait_mem(c, m, timeout, NULL);
+ return (u32) (u64) dma_addr;
};
-/**
- * i2o_flush_reply - Flush reply from I2O controller
- * @c: I2O controller
- * @m: the message identifier
- *
- * The I2O controller must be informed that the reply message is not needed
- * anymore. If you forget to flush the reply, the message frame can't be
- * used by the controller anymore and is therefore lost.
- */
-static inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
+static inline u32 i2o_dma_high(dma_addr_t dma_addr)
{
- writel(m, c->out_port);
+ return (u32) ((u64) dma_addr >> 32);
+};
+#else
+static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr)
+{
+ return (u32) ptr;
};
-/**
- * i2o_out_to_virt - Turn an I2O message to a virtual address
- * @c: controller
- * @m: message engine value
- *
- * Turn a receive message from an I2O controller bus address into
- * a Linux virtual address. The shared page frame is a linear block
- * so we simply have to shift the offset. This function does not
- * work for sender side messages as they are ioremap objects
- * provided by the I2O controller.
- */
-static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c,
- u32 m)
+static inline void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
{
- BUG_ON(m < c->out_queue.phys
- || m >= c->out_queue.phys + c->out_queue.len);
+ return (void *)context;
+};
- return c->out_queue.virt + (m - c->out_queue.phys);
+static inline u32 i2o_cntxt_list_remove(struct i2o_controller *c, void *ptr)
+{
+ return (u32) ptr;
};
-/**
- * i2o_msg_in_to_virt - Turn an I2O message to a virtual address
- * @c: controller
- * @m: message engine value
+static inline u32 i2o_cntxt_list_get_ptr(struct i2o_controller *c, void *ptr)
+{
+ return (u32) ptr;
+};
+
+static inline u32 i2o_ptr_low(void *ptr)
+{
+ return (u32) ptr;
+};
+
+static inline u32 i2o_ptr_high(void *ptr)
+{
+ return 0;
+};
+
+static inline u32 i2o_dma_low(dma_addr_t dma_addr)
+{
+ return (u32) dma_addr;
+};
+
+static inline u32 i2o_dma_high(dma_addr_t dma_addr)
+{
+ return 0;
+};
+#endif
+
+/**
+ * i2o_sg_tablesize - Calculate the maximum number of elements in a SGL
+ * @c: I2O controller for which the calculation should be done
+ * @body_size: maximum body size used for message in 32-bit words.
*
- * Turn a send message from an I2O controller bus address into
- * a Linux virtual address. The shared page frame is a linear block
- * so we simply have to shift the offset. This function does not
- * work for receive side messages as they are kmalloc objects
- * in a different pool.
+ * Return the maximum number of SG elements in a SG list.
*/
-static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
- i2o_controller *c,
- u32 m)
+static inline u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size)
{
- return c->in_queue.virt + m;
+ i2o_status_block *sb = c->status_block.virt;
+ u16 sg_count =
+ (sb->inbound_frame_size - sizeof(struct i2o_message) / 4) -
+ body_size;
+
+ if (c->pae_support) {
+ /*
+ * for 64-bit a SG attribute element must be added and each
+ * SG element needs 12 bytes instead of 8.
+ */
+ sg_count -= 2;
+ sg_count /= 3;
+ } else
+ sg_count /= 2;
+
+ if (c->short_req && (sg_count > 8))
+ sg_count = 8;
+
+ return sg_count;
};
-/*
- * Endian handling wrapped into the macro - keeps the core code
- * cleaner.
+/**
+ * i2o_dma_map_single - Map pointer to controller and fill in I2O message.
+ * @c: I2O controller
+ * @ptr: pointer to the data which should be mapped
+ * @size: size of data in bytes
+ * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE
+ * @sg_ptr: pointer to the SG list inside the I2O message
+ *
+ * This function does all necessary DMA handling and also writes the I2O
+ * SGL elements into the I2O message. For details on DMA handling see also
+ * dma_map_single(). The pointer sg_ptr will only be set to the end of the
+ * SG list if the allocation was successful.
+ *
+ * Returns DMA address which must be checked for failures using
+ * dma_mapping_error().
*/
+static inline dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
+ size_t size,
+ enum dma_data_direction direction,
+ u32 ** sg_ptr)
+{
+ u32 sg_flags;
+ u32 *mptr = *sg_ptr;
+ dma_addr_t dma_addr;
-#define i2o_raw_writel(val, mem) __raw_writel(cpu_to_le32(val), mem)
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ sg_flags = 0xd4000000;
+ break;
+ case DMA_FROM_DEVICE:
+ sg_flags = 0xd0000000;
+ break;
+ default:
+ return 0;
+ }
-extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int);
-extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int,
- void *, int);
+ dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction);
+ if (!dma_mapping_error(dma_addr)) {
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+ if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
+ *mptr++ = cpu_to_le32(0x7C020002);
+ *mptr++ = cpu_to_le32(PAGE_SIZE);
+ }
+#endif
-/* debugging and troubleshooting/diagnostic helpers. */
-#define osm_printk(level, format, arg...) \
- printk(level "%s: " format, OSM_NAME , ## arg)
+ *mptr++ = cpu_to_le32(sg_flags | size);
+ *mptr++ = cpu_to_le32(i2o_dma_low(dma_addr));
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+ if ((sizeof(dma_addr_t) > 4) && c->pae_support)
+ *mptr++ = cpu_to_le32(i2o_dma_high(dma_addr));
+#endif
+ *sg_ptr = mptr;
+ }
+ return dma_addr;
+};
-#ifdef DEBUG
-#define osm_debug(format, arg...) \
- osm_printk(KERN_DEBUG, format , ## arg)
-#else
-#define osm_debug(format, arg...) \
- do { } while (0)
+/**
+ * i2o_dma_map_sg - Map a SG List to controller and fill in I2O message.
+ * @c: I2O controller
+ * @sg: SG list to be mapped
+ * @sg_count: number of elements in the SG list
+ * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE
+ * @sg_ptr: pointer to the SG list inside the I2O message
+ *
+ * This function does all necessary DMA handling and also writes the I2O
+ * SGL elements into the I2O message. For details on DMA handling see also
+ * dma_map_sg(). The pointer sg_ptr will only be set to the end of the SG
+ * list if the allocation was successful.
+ *
+ * Returns 0 on failure or 1 on success.
+ */
+static inline int i2o_dma_map_sg(struct i2o_controller *c,
+ struct scatterlist *sg, int sg_count,
+ enum dma_data_direction direction,
+ u32 ** sg_ptr)
+{
+ u32 sg_flags;
+ u32 *mptr = *sg_ptr;
+
+ switch (direction) {
+ case DMA_TO_DEVICE:
+ sg_flags = 0x14000000;
+ break;
+ case DMA_FROM_DEVICE:
+ sg_flags = 0x10000000;
+ break;
+ default:
+ return 0;
+ }
+
+ sg_count = dma_map_sg(&c->pdev->dev, sg, sg_count, direction);
+ if (!sg_count)
+ return 0;
+
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+ if ((sizeof(dma_addr_t) > 4) && c->pae_support) {
+ *mptr++ = cpu_to_le32(0x7C020002);
+ *mptr++ = cpu_to_le32(PAGE_SIZE);
+ }
#endif
-#define osm_err(format, arg...) \
- osm_printk(KERN_ERR, format , ## arg)
-#define osm_info(format, arg...) \
- osm_printk(KERN_INFO, format , ## arg)
-#define osm_warn(format, arg...) \
- osm_printk(KERN_WARNING, format , ## arg)
+ while (sg_count-- > 0) {
+ if (!sg_count)
+ sg_flags |= 0xC0000000;
+ *mptr++ = cpu_to_le32(sg_flags | sg_dma_len(sg));
+ *mptr++ = cpu_to_le32(i2o_dma_low(sg_dma_address(sg)));
+#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64
+ if ((sizeof(dma_addr_t) > 4) && c->pae_support)
+ *mptr++ = cpu_to_le32(i2o_dma_high(sg_dma_address(sg)));
+#endif
+ sg++;
+ }
+ *sg_ptr = mptr;
-/* debugging functions */
-extern void i2o_report_status(const char *, const char *, struct i2o_message *);
-extern void i2o_dump_message(struct i2o_message *);
-extern void i2o_dump_hrt(struct i2o_controller *c);
-extern void i2o_debug_state(struct i2o_controller *c);
+ return 1;
+};
-/*
- * Cache strategies
+/**
+ * i2o_dma_alloc - Allocate DMA memory
+ * @dev: struct device pointer to the PCI device of the I2O controller
+ * @addr: i2o_dma struct which should get the DMA buffer
+ * @len: length of the new DMA memory
+ * @gfp_mask: GFP mask
+ *
+ * Allocate a coherent DMA memory and write the pointers into addr.
+ *
+ * Returns 0 on success or -ENOMEM on failure.
*/
+static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr,
+ size_t len, gfp_t gfp_mask)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int dma_64 = 0;
-/* The NULL strategy leaves everything up to the controller. This tends to be a
- * pessimal but functional choice.
- */
-#define CACHE_NULL 0
-/* Prefetch data when reading. We continually attempt to load the next 32 sectors
- * into the controller cache.
- */
-#define CACHE_PREFETCH 1
-/* Prefetch data when reading. We sometimes attempt to load the next 32 sectors
- * into the controller cache. When an I/O is less <= 8K we assume its probably
- * not sequential and don't prefetch (default)
- */
-#define CACHE_SMARTFETCH 2
-/* Data is written to the cache and then out on to the disk. The I/O must be
- * physically on the medium before the write is acknowledged (default without
- * NVRAM)
- */
-#define CACHE_WRITETHROUGH 17
-/* Data is written to the cache and then out on to the disk. The controller
- * is permitted to write back the cache any way it wants. (default if battery
- * backed NVRAM is present). It can be useful to set this for swap regardless of
- * battery state.
- */
-#define CACHE_WRITEBACK 18
-/* Optimise for under powered controllers, especially on RAID1 and RAID0. We
- * write large I/O's directly to disk bypassing the cache to avoid the extra
- * memory copy hits. Small writes are writeback cached
- */
-#define CACHE_SMARTBACK 19
-/* Optimise for under powered controllers, especially on RAID1 and RAID0. We
- * write large I/O's directly to disk bypassing the cache to avoid the extra
- * memory copy hits. Small writes are writethrough cached. Suitable for devices
- * lacking battery backup
- */
-#define CACHE_SMARTTHROUGH 20
+ if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) {
+ dma_64 = 1;
+ if (pci_set_dma_mask(pdev, DMA_32BIT_MASK))
+ return -ENOMEM;
+ }
-/*
- * Ioctl structures
- */
+ addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask);
-#define BLKI2OGRSTRAT _IOR('2', 1, int)
-#define BLKI2OGWSTRAT _IOR('2', 2, int)
-#define BLKI2OSRSTRAT _IOW('2', 3, int)
-#define BLKI2OSWSTRAT _IOW('2', 4, int)
+ if ((sizeof(dma_addr_t) > 4) && dma_64)
+ if (pci_set_dma_mask(pdev, DMA_64BIT_MASK))
+ printk(KERN_WARNING "i2o: unable to set 64-bit DMA");
-/*
- * I2O Function codes
- */
+ if (!addr->virt)
+ return -ENOMEM;
-/*
- * Executive Class
- */
-#define I2O_CMD_ADAPTER_ASSIGN 0xB3
-#define I2O_CMD_ADAPTER_READ 0xB2
-#define I2O_CMD_ADAPTER_RELEASE 0xB5
-#define I2O_CMD_BIOS_INFO_SET 0xA5
-#define I2O_CMD_BOOT_DEVICE_SET 0xA7
-#define I2O_CMD_CONFIG_VALIDATE 0xBB
-#define I2O_CMD_CONN_SETUP 0xCA
-#define I2O_CMD_DDM_DESTROY 0xB1
-#define I2O_CMD_DDM_ENABLE 0xD5
-#define I2O_CMD_DDM_QUIESCE 0xC7
-#define I2O_CMD_DDM_RESET 0xD9
-#define I2O_CMD_DDM_SUSPEND 0xAF
-#define I2O_CMD_DEVICE_ASSIGN 0xB7
-#define I2O_CMD_DEVICE_RELEASE 0xB9
-#define I2O_CMD_HRT_GET 0xA8
-#define I2O_CMD_ADAPTER_CLEAR 0xBE
-#define I2O_CMD_ADAPTER_CONNECT 0xC9
-#define I2O_CMD_ADAPTER_RESET 0xBD
-#define I2O_CMD_LCT_NOTIFY 0xA2
-#define I2O_CMD_OUTBOUND_INIT 0xA1
-#define I2O_CMD_PATH_ENABLE 0xD3
-#define I2O_CMD_PATH_QUIESCE 0xC5
-#define I2O_CMD_PATH_RESET 0xD7
-#define I2O_CMD_STATIC_MF_CREATE 0xDD
-#define I2O_CMD_STATIC_MF_RELEASE 0xDF
-#define I2O_CMD_STATUS_GET 0xA0
-#define I2O_CMD_SW_DOWNLOAD 0xA9
-#define I2O_CMD_SW_UPLOAD 0xAB
-#define I2O_CMD_SW_REMOVE 0xAD
-#define I2O_CMD_SYS_ENABLE 0xD1
-#define I2O_CMD_SYS_MODIFY 0xC1
-#define I2O_CMD_SYS_QUIESCE 0xC3
-#define I2O_CMD_SYS_TAB_SET 0xA3
+ memset(addr->virt, 0, len);
+ addr->len = len;
-/*
- * Utility Class
+ return 0;
+};
+
+/**
+ * i2o_dma_free - Free DMA memory
+ * @dev: struct device pointer to the PCI device of the I2O controller
+ * @addr: i2o_dma struct which contains the DMA buffer
+ *
+ * Free a coherent DMA memory and set virtual address of addr to NULL.
*/
-#define I2O_CMD_UTIL_NOP 0x00
-#define I2O_CMD_UTIL_ABORT 0x01
-#define I2O_CMD_UTIL_CLAIM 0x09
-#define I2O_CMD_UTIL_RELEASE 0x0B
-#define I2O_CMD_UTIL_PARAMS_GET 0x06
-#define I2O_CMD_UTIL_PARAMS_SET 0x05
-#define I2O_CMD_UTIL_EVT_REGISTER 0x13
-#define I2O_CMD_UTIL_EVT_ACK 0x14
-#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10
-#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D
-#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F
-#define I2O_CMD_UTIL_LOCK 0x17
-#define I2O_CMD_UTIL_LOCK_RELEASE 0x19
-#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15
+static inline void i2o_dma_free(struct device *dev, struct i2o_dma *addr)
+{
+ if (addr->virt) {
+ if (addr->phys)
+ dma_free_coherent(dev, addr->len, addr->virt,
+ addr->phys);
+ else
+ kfree(addr->virt);
+ addr->virt = NULL;
+ }
+};
-/*
- * SCSI Host Bus Adapter Class
+/**
+ * i2o_dma_realloc - Realloc DMA memory
+ * @dev: struct device pointer to the PCI device of the I2O controller
+ * @addr: pointer to a i2o_dma struct DMA buffer
+ * @len: new length of memory
+ * @gfp_mask: GFP mask
+ *
+ * If there was something allocated in the addr, free it first. If len > 0
+ * than try to allocate it and write the addresses back to the addr
+ * structure. If len == 0 set the virtual address to NULL.
+ *
+ * Returns the 0 on success or negative error code on failure.
*/
-#define I2O_CMD_SCSI_EXEC 0x81
-#define I2O_CMD_SCSI_ABORT 0x83
-#define I2O_CMD_SCSI_BUSRESET 0x27
+static inline int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr,
+ size_t len, gfp_t gfp_mask)
+{
+ i2o_dma_free(dev, addr);
+
+ if (len)
+ return i2o_dma_alloc(dev, addr, len, gfp_mask);
+
+ return 0;
+};
/*
- * Bus Adapter Class
+ * i2o_pool_alloc - Allocate an slab cache and mempool
+ * @mempool: pointer to struct i2o_pool to write data into.
+ * @name: name which is used to identify cache
+ * @size: size of each object
+ * @min_nr: minimum number of objects
+ *
+ * First allocates a slab cache with name and size. Then allocates a
+ * mempool which uses the slab cache for allocation and freeing.
+ *
+ * Returns 0 on success or negative error code on failure.
*/
-#define I2O_CMD_BUS_ADAPTER_RESET 0x85
-#define I2O_CMD_BUS_RESET 0x87
-#define I2O_CMD_BUS_SCAN 0x89
-#define I2O_CMD_BUS_QUIESCE 0x8b
+static inline int i2o_pool_alloc(struct i2o_pool *pool, const char *name,
+ size_t size, int min_nr)
+{
+ pool->name = kmalloc(strlen(name) + 1, GFP_KERNEL);
+ if (!pool->name)
+ goto exit;
+ strcpy(pool->name, name);
+
+ pool->slab =
+ kmem_cache_create(pool->name, size, 0, SLAB_HWCACHE_ALIGN, NULL,
+ NULL);
+ if (!pool->slab)
+ goto free_name;
+
+ pool->mempool =
+ mempool_create(min_nr, mempool_alloc_slab, mempool_free_slab,
+ pool->slab);
+ if (!pool->mempool)
+ goto free_slab;
+
+ return 0;
+
+ free_slab:
+ kmem_cache_destroy(pool->slab);
+
+ free_name:
+ kfree(pool->name);
+
+ exit:
+ return -ENOMEM;
+};
/*
- * Random Block Storage Class
+ * i2o_pool_free - Free slab cache and mempool again
+ * @mempool: pointer to struct i2o_pool which should be freed
+ *
+ * Note that you have to return all objects to the mempool again before
+ * calling i2o_pool_free().
*/
-#define I2O_CMD_BLOCK_READ 0x30
-#define I2O_CMD_BLOCK_WRITE 0x31
-#define I2O_CMD_BLOCK_CFLUSH 0x37
-#define I2O_CMD_BLOCK_MLOCK 0x49
-#define I2O_CMD_BLOCK_MUNLOCK 0x4B
-#define I2O_CMD_BLOCK_MMOUNT 0x41
-#define I2O_CMD_BLOCK_MEJECT 0x43
-#define I2O_CMD_BLOCK_POWER 0x70
-
-#define I2O_CMD_PRIVATE 0xFF
+static inline void i2o_pool_free(struct i2o_pool *pool)
+{
+ mempool_destroy(pool->mempool);
+ kmem_cache_destroy(pool->slab);
+ kfree(pool->name);
+};
-/* Command status values */
+/* I2O driver (OSM) functions */
+extern int i2o_driver_register(struct i2o_driver *);
+extern void i2o_driver_unregister(struct i2o_driver *);
-#define I2O_CMD_IN_PROGRESS 0x01
-#define I2O_CMD_REJECTED 0x02
-#define I2O_CMD_FAILED 0x03
-#define I2O_CMD_COMPLETED 0x04
+/**
+ * i2o_driver_notify_controller_add - Send notification of added controller
+ * to a single I2O driver
+ *
+ * Send notification of added controller to a single registered driver.
+ */
+static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv,
+ struct i2o_controller *c)
+{
+ if (drv->notify_controller_add)
+ drv->notify_controller_add(c);
+};
-/* I2O API function return values */
+/**
+ * i2o_driver_notify_controller_remove - Send notification of removed
+ * controller to a single I2O driver
+ *
+ * Send notification of removed controller to a single registered driver.
+ */
+static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv,
+ struct i2o_controller *c)
+{
+ if (drv->notify_controller_remove)
+ drv->notify_controller_remove(c);
+};
-#define I2O_RTN_NO_ERROR 0
-#define I2O_RTN_NOT_INIT 1
-#define I2O_RTN_FREE_Q_EMPTY 2
-#define I2O_RTN_TCB_ERROR 3
-#define I2O_RTN_TRANSACTION_ERROR 4
-#define I2O_RTN_ADAPTER_ALREADY_INIT 5
-#define I2O_RTN_MALLOC_ERROR 6
-#define I2O_RTN_ADPTR_NOT_REGISTERED 7
-#define I2O_RTN_MSG_REPLY_TIMEOUT 8
-#define I2O_RTN_NO_STATUS 9
-#define I2O_RTN_NO_FIRM_VER 10
-#define I2O_RTN_NO_LINK_SPEED 11
+/**
+ * i2o_driver_notify_device_add - Send notification of added device to a
+ * single I2O driver
+ *
+ * Send notification of added device to a single registered driver.
+ */
+static inline void i2o_driver_notify_device_add(struct i2o_driver *drv,
+ struct i2o_device *i2o_dev)
+{
+ if (drv->notify_device_add)
+ drv->notify_device_add(i2o_dev);
+};
-/* Reply message status defines for all messages */
+/**
+ * i2o_driver_notify_device_remove - Send notification of removed device
+ * to a single I2O driver
+ *
+ * Send notification of removed device to a single registered driver.
+ */
+static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv,
+ struct i2o_device *i2o_dev)
+{
+ if (drv->notify_device_remove)
+ drv->notify_device_remove(i2o_dev);
+};
-#define I2O_REPLY_STATUS_SUCCESS 0x00
-#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01
-#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02
-#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03
-#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04
-#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05
-#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06
-#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08
-#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09
-#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A
-#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B
-#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80
+extern void i2o_driver_notify_controller_add_all(struct i2o_controller *);
+extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *);
+extern void i2o_driver_notify_device_add_all(struct i2o_device *);
+extern void i2o_driver_notify_device_remove_all(struct i2o_device *);
-/* Status codes and Error Information for Parameter functions */
+/* I2O device functions */
+extern int i2o_device_claim(struct i2o_device *);
+extern int i2o_device_claim_release(struct i2o_device *);
-#define I2O_PARAMS_STATUS_SUCCESS 0x00
-#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01
-#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02
-#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03
-#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04
-#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05
-#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06
-#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07
-#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08
-#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09
-#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A
-#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B
-#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C
-#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D
-#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E
-#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F
-#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10
+/* Exec OSM functions */
+extern int i2o_exec_lct_get(struct i2o_controller *);
-/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
- * messages: Table 3-2 Detailed Status Codes.*/
+/* device / driver / kobject conversion functions */
+#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver)
+#define to_i2o_device(dev) container_of(dev, struct i2o_device, device)
+#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device)
+#define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj))
-#define I2O_DSC_SUCCESS 0x0000
-#define I2O_DSC_BAD_KEY 0x0002
-#define I2O_DSC_TCL_ERROR 0x0003
-#define I2O_DSC_REPLY_BUFFER_FULL 0x0004
-#define I2O_DSC_NO_SUCH_PAGE 0x0005
-#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006
-#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007
-#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009
-#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A
-#define I2O_DSC_DEVICE_LOCKED 0x000B
-#define I2O_DSC_DEVICE_RESET 0x000C
-#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D
-#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E
-#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F
-#define I2O_DSC_INVALID_OFFSET 0x0010
-#define I2O_DSC_INVALID_PARAMETER 0x0011
-#define I2O_DSC_INVALID_REQUEST 0x0012
-#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013
-#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014
-#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015
-#define I2O_DSC_MISSING_PARAMETER 0x0016
-#define I2O_DSC_TIMEOUT 0x0017
-#define I2O_DSC_UNKNOWN_ERROR 0x0018
-#define I2O_DSC_UNKNOWN_FUNCTION 0x0019
-#define I2O_DSC_UNSUPPORTED_VERSION 0x001A
-#define I2O_DSC_DEVICE_BUSY 0x001B
-#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C
+/**
+ * i2o_out_to_virt - Turn an I2O message to a virtual address
+ * @c: controller
+ * @m: message engine value
+ *
+ * Turn a receive message from an I2O controller bus address into
+ * a Linux virtual address. The shared page frame is a linear block
+ * so we simply have to shift the offset. This function does not
+ * work for sender side messages as they are ioremap objects
+ * provided by the I2O controller.
+ */
+static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c,
+ u32 m)
+{
+ BUG_ON(m < c->out_queue.phys
+ || m >= c->out_queue.phys + c->out_queue.len);
-/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
- Status Codes.*/
+ return c->out_queue.virt + (m - c->out_queue.phys);
+};
-#define I2O_BSA_DSC_SUCCESS 0x0000
-#define I2O_BSA_DSC_MEDIA_ERROR 0x0001
-#define I2O_BSA_DSC_ACCESS_ERROR 0x0002
-#define I2O_BSA_DSC_DEVICE_FAILURE 0x0003
-#define I2O_BSA_DSC_DEVICE_NOT_READY 0x0004
-#define I2O_BSA_DSC_MEDIA_NOT_PRESENT 0x0005
-#define I2O_BSA_DSC_MEDIA_LOCKED 0x0006
-#define I2O_BSA_DSC_MEDIA_FAILURE 0x0007
-#define I2O_BSA_DSC_PROTOCOL_FAILURE 0x0008
-#define I2O_BSA_DSC_BUS_FAILURE 0x0009
-#define I2O_BSA_DSC_ACCESS_VIOLATION 0x000A
-#define I2O_BSA_DSC_WRITE_PROTECTED 0x000B
-#define I2O_BSA_DSC_DEVICE_RESET 0x000C
-#define I2O_BSA_DSC_VOLUME_CHANGED 0x000D
-#define I2O_BSA_DSC_TIMEOUT 0x000E
+/**
+ * i2o_msg_in_to_virt - Turn an I2O message to a virtual address
+ * @c: controller
+ * @m: message engine value
+ *
+ * Turn a send message from an I2O controller bus address into
+ * a Linux virtual address. The shared page frame is a linear block
+ * so we simply have to shift the offset. This function does not
+ * work for receive side messages as they are kmalloc objects
+ * in a different pool.
+ */
+static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
+ i2o_controller *c,
+ u32 m)
+{
+ return c->in_queue.virt + m;
+};
-/* FailureStatusCodes, Table 3-3 Message Failure Codes */
+/**
+ * i2o_msg_get - obtain an I2O message from the IOP
+ * @c: I2O controller
+ *
+ * This function tries to get a message frame. If no message frame is
+ * available do not wait until one is availabe (see also i2o_msg_get_wait).
+ * The returned pointer to the message frame is not in I/O memory, it is
+ * allocated from a mempool. But because a MFA is allocated from the
+ * controller too it is guaranteed that i2o_msg_post() will never fail.
+ *
+ * On a success a pointer to the message frame is returned. If the message
+ * queue is empty -EBUSY is returned and if no memory is available -ENOMEM
+ * is returned.
+ */
+static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c)
+{
+ struct i2o_msg_mfa *mmsg = mempool_alloc(c->in_msg.mempool, GFP_ATOMIC);
+ if (!mmsg)
+ return ERR_PTR(-ENOMEM);
+
+ mmsg->mfa = readl(c->in_port);
+ if (mmsg->mfa == I2O_QUEUE_EMPTY) {
+ mempool_free(mmsg, c->in_msg.mempool);
+ return ERR_PTR(-EBUSY);
+ }
-#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED 0x81
-#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED 0x82
-#define I2O_FSC_TRANSPORT_CONGESTION 0x83
-#define I2O_FSC_TRANSPORT_FAILURE 0x84
-#define I2O_FSC_TRANSPORT_STATE_ERROR 0x85
-#define I2O_FSC_TRANSPORT_TIME_OUT 0x86
-#define I2O_FSC_TRANSPORT_ROUTING_FAILURE 0x87
-#define I2O_FSC_TRANSPORT_INVALID_VERSION 0x88
-#define I2O_FSC_TRANSPORT_INVALID_OFFSET 0x89
-#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS 0x8A
-#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL 0x8B
-#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE 0x8C
-#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID 0x8D
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID 0x8E
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F
-#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE 0xFF
+ return &mmsg->msg;
+};
-/* Device Claim Types */
-#define I2O_CLAIM_PRIMARY 0x01000000
-#define I2O_CLAIM_MANAGEMENT 0x02000000
-#define I2O_CLAIM_AUTHORIZED 0x03000000
-#define I2O_CLAIM_SECONDARY 0x04000000
+/**
+ * i2o_msg_post - Post I2O message to I2O controller
+ * @c: I2O controller to which the message should be send
+ * @msg: message returned by i2o_msg_get()
+ *
+ * Post the message to the I2O controller and return immediately.
+ */
+static inline void i2o_msg_post(struct i2o_controller *c,
+ struct i2o_message *msg)
+{
+ struct i2o_msg_mfa *mmsg;
-/* Message header defines for VersionOffset */
-#define I2OVER15 0x0001
-#define I2OVER20 0x0002
+ mmsg = container_of(msg, struct i2o_msg_mfa, msg);
+ memcpy_toio(i2o_msg_in_to_virt(c, mmsg->mfa), msg,
+ (le32_to_cpu(msg->u.head[0]) >> 16) << 2);
+ writel(mmsg->mfa, c->in_port);
+ mempool_free(mmsg, c->in_msg.mempool);
+};
-/* Default is 1.5 */
-#define I2OVERSION I2OVER15
+/**
+ * i2o_msg_post_wait - Post and wait a message and wait until return
+ * @c: controller
+ * @m: message to post
+ * @timeout: time in seconds to wait
+ *
+ * This API allows an OSM to post a message and then be told whether or
+ * not the system received a successful reply. If the message times out
+ * then the value '-ETIMEDOUT' is returned.
+ *
+ * Returns 0 on success or negative error code on failure.
+ */
+static inline int i2o_msg_post_wait(struct i2o_controller *c,
+ struct i2o_message *msg,
+ unsigned long timeout)
+{
+ return i2o_msg_post_wait_mem(c, msg, timeout, NULL);
+};
-#define SGL_OFFSET_0 I2OVERSION
-#define SGL_OFFSET_4 (0x0040 | I2OVERSION)
-#define SGL_OFFSET_5 (0x0050 | I2OVERSION)
-#define SGL_OFFSET_6 (0x0060 | I2OVERSION)
-#define SGL_OFFSET_7 (0x0070 | I2OVERSION)
-#define SGL_OFFSET_8 (0x0080 | I2OVERSION)
-#define SGL_OFFSET_9 (0x0090 | I2OVERSION)
-#define SGL_OFFSET_10 (0x00A0 | I2OVERSION)
-#define SGL_OFFSET_11 (0x00B0 | I2OVERSION)
-#define SGL_OFFSET_12 (0x00C0 | I2OVERSION)
-#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION)
+/**
+ * i2o_msg_nop_mfa - Returns a fetched MFA back to the controller
+ * @c: I2O controller from which the MFA was fetched
+ * @mfa: MFA which should be returned
+ *
+ * This function must be used for preserved messages, because i2o_msg_nop()
+ * also returns the allocated memory back to the msg_pool mempool.
+ */
+static inline void i2o_msg_nop_mfa(struct i2o_controller *c, u32 mfa)
+{
+ struct i2o_message __iomem *msg;
+ u32 nop[3] = {
+ THREE_WORD_MSG_SIZE | SGL_OFFSET_0,
+ I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID,
+ 0x00000000
+ };
+
+ msg = i2o_msg_in_to_virt(c, mfa);
+ memcpy_toio(msg, nop, sizeof(nop));
+ writel(mfa, c->in_port);
+};
-/* Transaction Reply Lists (TRL) Control Word structure */
-#define TRL_SINGLE_FIXED_LENGTH 0x00
-#define TRL_SINGLE_VARIABLE_LENGTH 0x40
-#define TRL_MULTIPLE_FIXED_LENGTH 0x80
+/**
+ * i2o_msg_nop - Returns a message which is not used
+ * @c: I2O controller from which the message was created
+ * @msg: message which should be returned
+ *
+ * If you fetch a message via i2o_msg_get, and can't use it, you must
+ * return the message with this function. Otherwise the MFA is lost as well
+ * as the allocated memory from the mempool.
+ */
+static inline void i2o_msg_nop(struct i2o_controller *c,
+ struct i2o_message *msg)
+{
+ struct i2o_msg_mfa *mmsg;
+ mmsg = container_of(msg, struct i2o_msg_mfa, msg);
- /* msg header defines for MsgFlags */
-#define MSG_STATIC 0x0100
-#define MSG_64BIT_CNTXT 0x0200
-#define MSG_MULTI_TRANS 0x1000
-#define MSG_FAIL 0x2000
-#define MSG_FINAL 0x4000
-#define MSG_REPLY 0x8000
+ i2o_msg_nop_mfa(c, mmsg->mfa);
+ mempool_free(mmsg, c->in_msg.mempool);
+};
- /* minimum size msg */
-#define THREE_WORD_MSG_SIZE 0x00030000
-#define FOUR_WORD_MSG_SIZE 0x00040000
-#define FIVE_WORD_MSG_SIZE 0x00050000
-#define SIX_WORD_MSG_SIZE 0x00060000
-#define SEVEN_WORD_MSG_SIZE 0x00070000
-#define EIGHT_WORD_MSG_SIZE 0x00080000
-#define NINE_WORD_MSG_SIZE 0x00090000
-#define TEN_WORD_MSG_SIZE 0x000A0000
-#define ELEVEN_WORD_MSG_SIZE 0x000B0000
-#define I2O_MESSAGE_SIZE(x) ((x)<<16)
+/**
+ * i2o_flush_reply - Flush reply from I2O controller
+ * @c: I2O controller
+ * @m: the message identifier
+ *
+ * The I2O controller must be informed that the reply message is not needed
+ * anymore. If you forget to flush the reply, the message frame can't be
+ * used by the controller anymore and is therefore lost.
+ */
+static inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
+{
+ writel(m, c->out_port);
+};
-/* special TID assignments */
-#define ADAPTER_TID 0
-#define HOST_TID 1
+/*
+ * Endian handling wrapped into the macro - keeps the core code
+ * cleaner.
+ */
-/* outbound queue defines */
-#define I2O_MAX_OUTBOUND_MSG_FRAMES 128
-#define I2O_OUTBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */
+#define i2o_raw_writel(val, mem) __raw_writel(cpu_to_le32(val), mem)
-#define I2O_POST_WAIT_OK 0
-#define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT
+extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int);
+extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int,
+ void *, int);
-#define I2O_CONTEXT_LIST_MIN_LENGTH 15
-#define I2O_CONTEXT_LIST_USED 0x01
-#define I2O_CONTEXT_LIST_DELETED 0x02
+/* debugging and troubleshooting/diagnostic helpers. */
+#define osm_printk(level, format, arg...) \
+ printk(level "%s: " format, OSM_NAME , ## arg)
-/* timeouts */
-#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE 15
-#define I2O_TIMEOUT_MESSAGE_GET 5
-#define I2O_TIMEOUT_RESET 30
-#define I2O_TIMEOUT_STATUS_GET 5
-#define I2O_TIMEOUT_LCT_GET 360
-#define I2O_TIMEOUT_SCSI_SCB_ABORT 240
+#ifdef DEBUG
+#define osm_debug(format, arg...) \
+ osm_printk(KERN_DEBUG, format , ## arg)
+#else
+#define osm_debug(format, arg...) \
+ do { } while (0)
+#endif
-/* retries */
-#define I2O_HRT_GET_TRIES 3
-#define I2O_LCT_GET_TRIES 3
+#define osm_err(format, arg...) \
+ osm_printk(KERN_ERR, format , ## arg)
+#define osm_info(format, arg...) \
+ osm_printk(KERN_INFO, format , ## arg)
+#define osm_warn(format, arg...) \
+ osm_printk(KERN_WARNING, format , ## arg)
-/* defines for max_sectors and max_phys_segments */
-#define I2O_MAX_SECTORS 1024
-#define I2O_MAX_SECTORS_LIMITED 256
-#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS
+/* debugging functions */
+extern void i2o_report_status(const char *, const char *, struct i2o_message *);
+extern void i2o_dump_message(struct i2o_message *);
+extern void i2o_dump_hrt(struct i2o_controller *c);
+extern void i2o_debug_state(struct i2o_controller *c);
#endif /* __KERNEL__ */
#endif /* _I2O_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / commitdiff